Initialize other pheripherals
This commit is contained in:
parent
ec4df11c61
commit
ffec0e2b57
69 changed files with 25802 additions and 620 deletions
452
Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_pcd.h
Normal file
452
Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_pcd.h
Normal file
|
|
@ -0,0 +1,452 @@
|
|||
/**
|
||||
******************************************************************************
|
||||
* @file stm32f4xx_hal_pcd.h
|
||||
* @author MCD Application Team
|
||||
* @brief Header file of PCD HAL module.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* <h2><center>© Copyright (c) 2016 STMicroelectronics.
|
||||
* All rights reserved.</center></h2>
|
||||
*
|
||||
* This software component is licensed by ST under BSD 3-Clause license,
|
||||
* the "License"; You may not use this file except in compliance with the
|
||||
* License. You may obtain a copy of the License at:
|
||||
* opensource.org/licenses/BSD-3-Clause
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef STM32F4xx_HAL_PCD_H
|
||||
#define STM32F4xx_HAL_PCD_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "stm32f4xx_ll_usb.h"
|
||||
|
||||
#if defined (USB_OTG_FS) || defined (USB_OTG_HS)
|
||||
|
||||
/** @addtogroup STM32F4xx_HAL_Driver
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup PCD
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* Exported types ------------------------------------------------------------*/
|
||||
/** @defgroup PCD_Exported_Types PCD Exported Types
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief PCD State structure definition
|
||||
*/
|
||||
typedef enum
|
||||
{
|
||||
HAL_PCD_STATE_RESET = 0x00,
|
||||
HAL_PCD_STATE_READY = 0x01,
|
||||
HAL_PCD_STATE_ERROR = 0x02,
|
||||
HAL_PCD_STATE_BUSY = 0x03,
|
||||
HAL_PCD_STATE_TIMEOUT = 0x04
|
||||
} PCD_StateTypeDef;
|
||||
|
||||
/* Device LPM suspend state */
|
||||
typedef enum
|
||||
{
|
||||
LPM_L0 = 0x00, /* on */
|
||||
LPM_L1 = 0x01, /* LPM L1 sleep */
|
||||
LPM_L2 = 0x02, /* suspend */
|
||||
LPM_L3 = 0x03, /* off */
|
||||
} PCD_LPM_StateTypeDef;
|
||||
|
||||
typedef enum
|
||||
{
|
||||
PCD_LPM_L0_ACTIVE = 0x00, /* on */
|
||||
PCD_LPM_L1_ACTIVE = 0x01, /* LPM L1 sleep */
|
||||
} PCD_LPM_MsgTypeDef;
|
||||
|
||||
typedef enum
|
||||
{
|
||||
PCD_BCD_ERROR = 0xFF,
|
||||
PCD_BCD_CONTACT_DETECTION = 0xFE,
|
||||
PCD_BCD_STD_DOWNSTREAM_PORT = 0xFD,
|
||||
PCD_BCD_CHARGING_DOWNSTREAM_PORT = 0xFC,
|
||||
PCD_BCD_DEDICATED_CHARGING_PORT = 0xFB,
|
||||
PCD_BCD_DISCOVERY_COMPLETED = 0x00,
|
||||
|
||||
} PCD_BCD_MsgTypeDef;
|
||||
|
||||
#if defined (USB_OTG_FS) || defined (USB_OTG_HS)
|
||||
typedef USB_OTG_GlobalTypeDef PCD_TypeDef;
|
||||
typedef USB_OTG_CfgTypeDef PCD_InitTypeDef;
|
||||
typedef USB_OTG_EPTypeDef PCD_EPTypeDef;
|
||||
#endif /* defined (USB_OTG_FS) || defined (USB_OTG_HS) */
|
||||
|
||||
/**
|
||||
* @brief PCD Handle Structure definition
|
||||
*/
|
||||
#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U)
|
||||
typedef struct __PCD_HandleTypeDef
|
||||
#else
|
||||
typedef struct
|
||||
#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */
|
||||
{
|
||||
PCD_TypeDef *Instance; /*!< Register base address */
|
||||
PCD_InitTypeDef Init; /*!< PCD required parameters */
|
||||
__IO uint8_t USB_Address; /*!< USB Address */
|
||||
PCD_EPTypeDef IN_ep[16]; /*!< IN endpoint parameters */
|
||||
PCD_EPTypeDef OUT_ep[16]; /*!< OUT endpoint parameters */
|
||||
HAL_LockTypeDef Lock; /*!< PCD peripheral status */
|
||||
__IO PCD_StateTypeDef State; /*!< PCD communication state */
|
||||
__IO uint32_t ErrorCode; /*!< PCD Error code */
|
||||
uint32_t Setup[12]; /*!< Setup packet buffer */
|
||||
PCD_LPM_StateTypeDef LPM_State; /*!< LPM State */
|
||||
uint32_t BESL;
|
||||
|
||||
|
||||
uint32_t lpm_active; /*!< Enable or disable the Link Power Management .
|
||||
This parameter can be set to ENABLE or DISABLE */
|
||||
|
||||
uint32_t battery_charging_active; /*!< Enable or disable Battery charging.
|
||||
This parameter can be set to ENABLE or DISABLE */
|
||||
void *pData; /*!< Pointer to upper stack Handler */
|
||||
|
||||
#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U)
|
||||
void (* SOFCallback)(struct __PCD_HandleTypeDef *hpcd); /*!< USB OTG PCD SOF callback */
|
||||
void (* SetupStageCallback)(struct __PCD_HandleTypeDef *hpcd); /*!< USB OTG PCD Setup Stage callback */
|
||||
void (* ResetCallback)(struct __PCD_HandleTypeDef *hpcd); /*!< USB OTG PCD Reset callback */
|
||||
void (* SuspendCallback)(struct __PCD_HandleTypeDef *hpcd); /*!< USB OTG PCD Suspend callback */
|
||||
void (* ResumeCallback)(struct __PCD_HandleTypeDef *hpcd); /*!< USB OTG PCD Resume callback */
|
||||
void (* ConnectCallback)(struct __PCD_HandleTypeDef *hpcd); /*!< USB OTG PCD Connect callback */
|
||||
void (* DisconnectCallback)(struct __PCD_HandleTypeDef *hpcd); /*!< USB OTG PCD Disconnect callback */
|
||||
|
||||
void (* DataOutStageCallback)(struct __PCD_HandleTypeDef *hpcd, uint8_t epnum); /*!< USB OTG PCD Data OUT Stage callback */
|
||||
void (* DataInStageCallback)(struct __PCD_HandleTypeDef *hpcd, uint8_t epnum); /*!< USB OTG PCD Data IN Stage callback */
|
||||
void (* ISOOUTIncompleteCallback)(struct __PCD_HandleTypeDef *hpcd, uint8_t epnum); /*!< USB OTG PCD ISO OUT Incomplete callback */
|
||||
void (* ISOINIncompleteCallback)(struct __PCD_HandleTypeDef *hpcd, uint8_t epnum); /*!< USB OTG PCD ISO IN Incomplete callback */
|
||||
void (* BCDCallback)(struct __PCD_HandleTypeDef *hpcd, PCD_BCD_MsgTypeDef msg); /*!< USB OTG PCD BCD callback */
|
||||
void (* LPMCallback)(struct __PCD_HandleTypeDef *hpcd, PCD_LPM_MsgTypeDef msg); /*!< USB OTG PCD LPM callback */
|
||||
|
||||
void (* MspInitCallback)(struct __PCD_HandleTypeDef *hpcd); /*!< USB OTG PCD Msp Init callback */
|
||||
void (* MspDeInitCallback)(struct __PCD_HandleTypeDef *hpcd); /*!< USB OTG PCD Msp DeInit callback */
|
||||
#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */
|
||||
} PCD_HandleTypeDef;
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Include PCD HAL Extended module */
|
||||
#include "stm32f4xx_hal_pcd_ex.h"
|
||||
|
||||
/* Exported constants --------------------------------------------------------*/
|
||||
/** @defgroup PCD_Exported_Constants PCD Exported Constants
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup PCD_Speed PCD Speed
|
||||
* @{
|
||||
*/
|
||||
#define PCD_SPEED_HIGH USBD_HS_SPEED
|
||||
#define PCD_SPEED_HIGH_IN_FULL USBD_HSINFS_SPEED
|
||||
#define PCD_SPEED_FULL USBD_FS_SPEED
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup PCD_PHY_Module PCD PHY Module
|
||||
* @{
|
||||
*/
|
||||
#define PCD_PHY_ULPI 1U
|
||||
#define PCD_PHY_EMBEDDED 2U
|
||||
#define PCD_PHY_UTMI 3U
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup PCD_Error_Code_definition PCD Error Code definition
|
||||
* @brief PCD Error Code definition
|
||||
* @{
|
||||
*/
|
||||
#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U)
|
||||
#define HAL_PCD_ERROR_INVALID_CALLBACK (0x00000010U) /*!< Invalid Callback error */
|
||||
#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported macros -----------------------------------------------------------*/
|
||||
/** @defgroup PCD_Exported_Macros PCD Exported Macros
|
||||
* @brief macros to handle interrupts and specific clock configurations
|
||||
* @{
|
||||
*/
|
||||
#if defined (USB_OTG_FS) || defined (USB_OTG_HS)
|
||||
#define __HAL_PCD_ENABLE(__HANDLE__) (void)USB_EnableGlobalInt ((__HANDLE__)->Instance)
|
||||
#define __HAL_PCD_DISABLE(__HANDLE__) (void)USB_DisableGlobalInt ((__HANDLE__)->Instance)
|
||||
|
||||
#define __HAL_PCD_GET_FLAG(__HANDLE__, __INTERRUPT__) ((USB_ReadInterrupts((__HANDLE__)->Instance) & (__INTERRUPT__)) == (__INTERRUPT__))
|
||||
#define __HAL_PCD_CLEAR_FLAG(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->GINTSTS) &= (__INTERRUPT__))
|
||||
#define __HAL_PCD_IS_INVALID_INTERRUPT(__HANDLE__) (USB_ReadInterrupts((__HANDLE__)->Instance) == 0U)
|
||||
|
||||
|
||||
#define __HAL_PCD_UNGATE_PHYCLOCK(__HANDLE__) *(__IO uint32_t *)((uint32_t)((__HANDLE__)->Instance) + USB_OTG_PCGCCTL_BASE) &= \
|
||||
~(USB_OTG_PCGCCTL_STOPCLK)
|
||||
|
||||
#define __HAL_PCD_GATE_PHYCLOCK(__HANDLE__) *(__IO uint32_t *)((uint32_t)((__HANDLE__)->Instance) + USB_OTG_PCGCCTL_BASE) |= USB_OTG_PCGCCTL_STOPCLK
|
||||
|
||||
#define __HAL_PCD_IS_PHY_SUSPENDED(__HANDLE__) ((*(__IO uint32_t *)((uint32_t)((__HANDLE__)->Instance) + USB_OTG_PCGCCTL_BASE)) & 0x10U)
|
||||
|
||||
#define __HAL_USB_OTG_HS_WAKEUP_EXTI_ENABLE_IT() EXTI->IMR |= (USB_OTG_HS_WAKEUP_EXTI_LINE)
|
||||
#define __HAL_USB_OTG_HS_WAKEUP_EXTI_DISABLE_IT() EXTI->IMR &= ~(USB_OTG_HS_WAKEUP_EXTI_LINE)
|
||||
#define __HAL_USB_OTG_HS_WAKEUP_EXTI_GET_FLAG() EXTI->PR & (USB_OTG_HS_WAKEUP_EXTI_LINE)
|
||||
#define __HAL_USB_OTG_HS_WAKEUP_EXTI_CLEAR_FLAG() EXTI->PR = (USB_OTG_HS_WAKEUP_EXTI_LINE)
|
||||
|
||||
#define __HAL_USB_OTG_HS_WAKEUP_EXTI_ENABLE_RISING_EDGE() \
|
||||
do { \
|
||||
EXTI->FTSR &= ~(USB_OTG_HS_WAKEUP_EXTI_LINE); \
|
||||
EXTI->RTSR |= USB_OTG_HS_WAKEUP_EXTI_LINE; \
|
||||
} while(0U)
|
||||
#define __HAL_USB_OTG_FS_WAKEUP_EXTI_ENABLE_IT() EXTI->IMR |= USB_OTG_FS_WAKEUP_EXTI_LINE
|
||||
#define __HAL_USB_OTG_FS_WAKEUP_EXTI_DISABLE_IT() EXTI->IMR &= ~(USB_OTG_FS_WAKEUP_EXTI_LINE)
|
||||
#define __HAL_USB_OTG_FS_WAKEUP_EXTI_GET_FLAG() EXTI->PR & (USB_OTG_FS_WAKEUP_EXTI_LINE)
|
||||
#define __HAL_USB_OTG_FS_WAKEUP_EXTI_CLEAR_FLAG() EXTI->PR = USB_OTG_FS_WAKEUP_EXTI_LINE
|
||||
|
||||
#define __HAL_USB_OTG_FS_WAKEUP_EXTI_ENABLE_RISING_EDGE() \
|
||||
do { \
|
||||
EXTI->FTSR &= ~(USB_OTG_FS_WAKEUP_EXTI_LINE); \
|
||||
EXTI->RTSR |= USB_OTG_FS_WAKEUP_EXTI_LINE; \
|
||||
} while(0U)
|
||||
#endif /* defined (USB_OTG_FS) || defined (USB_OTG_HS) */
|
||||
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported functions --------------------------------------------------------*/
|
||||
/** @addtogroup PCD_Exported_Functions PCD Exported Functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* Initialization/de-initialization functions ********************************/
|
||||
/** @addtogroup PCD_Exported_Functions_Group1 Initialization and de-initialization functions
|
||||
* @{
|
||||
*/
|
||||
HAL_StatusTypeDef HAL_PCD_Init(PCD_HandleTypeDef *hpcd);
|
||||
HAL_StatusTypeDef HAL_PCD_DeInit(PCD_HandleTypeDef *hpcd);
|
||||
void HAL_PCD_MspInit(PCD_HandleTypeDef *hpcd);
|
||||
void HAL_PCD_MspDeInit(PCD_HandleTypeDef *hpcd);
|
||||
|
||||
#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U)
|
||||
/** @defgroup HAL_PCD_Callback_ID_enumeration_definition HAL USB OTG PCD Callback ID enumeration definition
|
||||
* @brief HAL USB OTG PCD Callback ID enumeration definition
|
||||
* @{
|
||||
*/
|
||||
typedef enum
|
||||
{
|
||||
HAL_PCD_SOF_CB_ID = 0x01, /*!< USB PCD SOF callback ID */
|
||||
HAL_PCD_SETUPSTAGE_CB_ID = 0x02, /*!< USB PCD Setup Stage callback ID */
|
||||
HAL_PCD_RESET_CB_ID = 0x03, /*!< USB PCD Reset callback ID */
|
||||
HAL_PCD_SUSPEND_CB_ID = 0x04, /*!< USB PCD Suspend callback ID */
|
||||
HAL_PCD_RESUME_CB_ID = 0x05, /*!< USB PCD Resume callback ID */
|
||||
HAL_PCD_CONNECT_CB_ID = 0x06, /*!< USB PCD Connect callback ID */
|
||||
HAL_PCD_DISCONNECT_CB_ID = 0x07, /*!< USB PCD Disconnect callback ID */
|
||||
|
||||
HAL_PCD_MSPINIT_CB_ID = 0x08, /*!< USB PCD MspInit callback ID */
|
||||
HAL_PCD_MSPDEINIT_CB_ID = 0x09 /*!< USB PCD MspDeInit callback ID */
|
||||
|
||||
} HAL_PCD_CallbackIDTypeDef;
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup HAL_PCD_Callback_pointer_definition HAL USB OTG PCD Callback pointer definition
|
||||
* @brief HAL USB OTG PCD Callback pointer definition
|
||||
* @{
|
||||
*/
|
||||
|
||||
typedef void (*pPCD_CallbackTypeDef)(PCD_HandleTypeDef *hpcd); /*!< pointer to a common USB OTG PCD callback function */
|
||||
typedef void (*pPCD_DataOutStageCallbackTypeDef)(PCD_HandleTypeDef *hpcd, uint8_t epnum); /*!< pointer to USB OTG PCD Data OUT Stage callback */
|
||||
typedef void (*pPCD_DataInStageCallbackTypeDef)(PCD_HandleTypeDef *hpcd, uint8_t epnum); /*!< pointer to USB OTG PCD Data IN Stage callback */
|
||||
typedef void (*pPCD_IsoOutIncpltCallbackTypeDef)(PCD_HandleTypeDef *hpcd, uint8_t epnum); /*!< pointer to USB OTG PCD ISO OUT Incomplete callback */
|
||||
typedef void (*pPCD_IsoInIncpltCallbackTypeDef)(PCD_HandleTypeDef *hpcd, uint8_t epnum); /*!< pointer to USB OTG PCD ISO IN Incomplete callback */
|
||||
typedef void (*pPCD_LpmCallbackTypeDef)(PCD_HandleTypeDef *hpcd, PCD_LPM_MsgTypeDef msg); /*!< pointer to USB OTG PCD LPM callback */
|
||||
typedef void (*pPCD_BcdCallbackTypeDef)(PCD_HandleTypeDef *hpcd, PCD_BCD_MsgTypeDef msg); /*!< pointer to USB OTG PCD BCD callback */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
HAL_StatusTypeDef HAL_PCD_RegisterCallback(PCD_HandleTypeDef *hpcd, HAL_PCD_CallbackIDTypeDef CallbackID, pPCD_CallbackTypeDef pCallback);
|
||||
HAL_StatusTypeDef HAL_PCD_UnRegisterCallback(PCD_HandleTypeDef *hpcd, HAL_PCD_CallbackIDTypeDef CallbackID);
|
||||
|
||||
HAL_StatusTypeDef HAL_PCD_RegisterDataOutStageCallback(PCD_HandleTypeDef *hpcd, pPCD_DataOutStageCallbackTypeDef pCallback);
|
||||
HAL_StatusTypeDef HAL_PCD_UnRegisterDataOutStageCallback(PCD_HandleTypeDef *hpcd);
|
||||
|
||||
HAL_StatusTypeDef HAL_PCD_RegisterDataInStageCallback(PCD_HandleTypeDef *hpcd, pPCD_DataInStageCallbackTypeDef pCallback);
|
||||
HAL_StatusTypeDef HAL_PCD_UnRegisterDataInStageCallback(PCD_HandleTypeDef *hpcd);
|
||||
|
||||
HAL_StatusTypeDef HAL_PCD_RegisterIsoOutIncpltCallback(PCD_HandleTypeDef *hpcd, pPCD_IsoOutIncpltCallbackTypeDef pCallback);
|
||||
HAL_StatusTypeDef HAL_PCD_UnRegisterIsoOutIncpltCallback(PCD_HandleTypeDef *hpcd);
|
||||
|
||||
HAL_StatusTypeDef HAL_PCD_RegisterIsoInIncpltCallback(PCD_HandleTypeDef *hpcd, pPCD_IsoInIncpltCallbackTypeDef pCallback);
|
||||
HAL_StatusTypeDef HAL_PCD_UnRegisterIsoInIncpltCallback(PCD_HandleTypeDef *hpcd);
|
||||
|
||||
HAL_StatusTypeDef HAL_PCD_RegisterBcdCallback(PCD_HandleTypeDef *hpcd, pPCD_BcdCallbackTypeDef pCallback);
|
||||
HAL_StatusTypeDef HAL_PCD_UnRegisterBcdCallback(PCD_HandleTypeDef *hpcd);
|
||||
|
||||
HAL_StatusTypeDef HAL_PCD_RegisterLpmCallback(PCD_HandleTypeDef *hpcd, pPCD_LpmCallbackTypeDef pCallback);
|
||||
HAL_StatusTypeDef HAL_PCD_UnRegisterLpmCallback(PCD_HandleTypeDef *hpcd);
|
||||
#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* I/O operation functions ***************************************************/
|
||||
/* Non-Blocking mode: Interrupt */
|
||||
/** @addtogroup PCD_Exported_Functions_Group2 Input and Output operation functions
|
||||
* @{
|
||||
*/
|
||||
HAL_StatusTypeDef HAL_PCD_Start(PCD_HandleTypeDef *hpcd);
|
||||
HAL_StatusTypeDef HAL_PCD_Stop(PCD_HandleTypeDef *hpcd);
|
||||
void HAL_PCD_IRQHandler(PCD_HandleTypeDef *hpcd);
|
||||
|
||||
void HAL_PCD_SOFCallback(PCD_HandleTypeDef *hpcd);
|
||||
void HAL_PCD_SetupStageCallback(PCD_HandleTypeDef *hpcd);
|
||||
void HAL_PCD_ResetCallback(PCD_HandleTypeDef *hpcd);
|
||||
void HAL_PCD_SuspendCallback(PCD_HandleTypeDef *hpcd);
|
||||
void HAL_PCD_ResumeCallback(PCD_HandleTypeDef *hpcd);
|
||||
void HAL_PCD_ConnectCallback(PCD_HandleTypeDef *hpcd);
|
||||
void HAL_PCD_DisconnectCallback(PCD_HandleTypeDef *hpcd);
|
||||
|
||||
void HAL_PCD_DataOutStageCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum);
|
||||
void HAL_PCD_DataInStageCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum);
|
||||
void HAL_PCD_ISOOUTIncompleteCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum);
|
||||
void HAL_PCD_ISOINIncompleteCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Peripheral Control functions **********************************************/
|
||||
/** @addtogroup PCD_Exported_Functions_Group3 Peripheral Control functions
|
||||
* @{
|
||||
*/
|
||||
HAL_StatusTypeDef HAL_PCD_DevConnect(PCD_HandleTypeDef *hpcd);
|
||||
HAL_StatusTypeDef HAL_PCD_DevDisconnect(PCD_HandleTypeDef *hpcd);
|
||||
HAL_StatusTypeDef HAL_PCD_SetAddress(PCD_HandleTypeDef *hpcd, uint8_t address);
|
||||
HAL_StatusTypeDef HAL_PCD_EP_Open(PCD_HandleTypeDef *hpcd, uint8_t ep_addr, uint16_t ep_mps, uint8_t ep_type);
|
||||
HAL_StatusTypeDef HAL_PCD_EP_Close(PCD_HandleTypeDef *hpcd, uint8_t ep_addr);
|
||||
HAL_StatusTypeDef HAL_PCD_EP_Receive(PCD_HandleTypeDef *hpcd, uint8_t ep_addr, uint8_t *pBuf, uint32_t len);
|
||||
HAL_StatusTypeDef HAL_PCD_EP_Transmit(PCD_HandleTypeDef *hpcd, uint8_t ep_addr, uint8_t *pBuf, uint32_t len);
|
||||
uint32_t HAL_PCD_EP_GetRxCount(PCD_HandleTypeDef *hpcd, uint8_t ep_addr);
|
||||
HAL_StatusTypeDef HAL_PCD_EP_SetStall(PCD_HandleTypeDef *hpcd, uint8_t ep_addr);
|
||||
HAL_StatusTypeDef HAL_PCD_EP_ClrStall(PCD_HandleTypeDef *hpcd, uint8_t ep_addr);
|
||||
HAL_StatusTypeDef HAL_PCD_EP_Flush(PCD_HandleTypeDef *hpcd, uint8_t ep_addr);
|
||||
HAL_StatusTypeDef HAL_PCD_ActivateRemoteWakeup(PCD_HandleTypeDef *hpcd);
|
||||
HAL_StatusTypeDef HAL_PCD_DeActivateRemoteWakeup(PCD_HandleTypeDef *hpcd);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Peripheral State functions ************************************************/
|
||||
/** @addtogroup PCD_Exported_Functions_Group4 Peripheral State functions
|
||||
* @{
|
||||
*/
|
||||
PCD_StateTypeDef HAL_PCD_GetState(PCD_HandleTypeDef *hpcd);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Private constants ---------------------------------------------------------*/
|
||||
/** @defgroup PCD_Private_Constants PCD Private Constants
|
||||
* @{
|
||||
*/
|
||||
/** @defgroup USB_EXTI_Line_Interrupt USB EXTI line interrupt
|
||||
* @{
|
||||
*/
|
||||
#if defined (USB_OTG_FS) || defined (USB_OTG_HS)
|
||||
#define USB_OTG_FS_WAKEUP_EXTI_RISING_EDGE 0x08U
|
||||
#define USB_OTG_FS_WAKEUP_EXTI_FALLING_EDGE 0x0CU
|
||||
#define USB_OTG_FS_WAKEUP_EXTI_RISING_FALLING_EDGE 0x10U
|
||||
|
||||
#define USB_OTG_HS_WAKEUP_EXTI_RISING_EDGE 0x08U
|
||||
#define USB_OTG_HS_WAKEUP_EXTI_FALLING_EDGE 0x0CU
|
||||
#define USB_OTG_HS_WAKEUP_EXTI_RISING_FALLING_EDGE 0x10U
|
||||
|
||||
#define USB_OTG_FS_WAKEUP_EXTI_LINE (0x1U << 18) /*!< USB FS EXTI Line WakeUp Interrupt */
|
||||
#define USB_OTG_HS_WAKEUP_EXTI_LINE (0x1U << 20) /*!< USB HS EXTI Line WakeUp Interrupt */
|
||||
#endif /* defined (USB_OTG_FS) || defined (USB_OTG_HS) */
|
||||
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#if defined (USB_OTG_FS) || defined (USB_OTG_HS)
|
||||
#ifndef USB_OTG_DOEPINT_OTEPSPR
|
||||
#define USB_OTG_DOEPINT_OTEPSPR (0x1UL << 5) /*!< Status Phase Received interrupt */
|
||||
#endif
|
||||
|
||||
#ifndef USB_OTG_DOEPMSK_OTEPSPRM
|
||||
#define USB_OTG_DOEPMSK_OTEPSPRM (0x1UL << 5) /*!< Setup Packet Received interrupt mask */
|
||||
#endif
|
||||
|
||||
#ifndef USB_OTG_DOEPINT_NAK
|
||||
#define USB_OTG_DOEPINT_NAK (0x1UL << 13) /*!< NAK interrupt */
|
||||
#endif
|
||||
|
||||
#ifndef USB_OTG_DOEPMSK_NAKM
|
||||
#define USB_OTG_DOEPMSK_NAKM (0x1UL << 13) /*!< OUT Packet NAK interrupt mask */
|
||||
#endif
|
||||
|
||||
#ifndef USB_OTG_DOEPINT_STPKTRX
|
||||
#define USB_OTG_DOEPINT_STPKTRX (0x1UL << 15) /*!< Setup Packet Received interrupt */
|
||||
#endif
|
||||
|
||||
#ifndef USB_OTG_DOEPMSK_NYETM
|
||||
#define USB_OTG_DOEPMSK_NYETM (0x1UL << 14) /*!< Setup Packet Received interrupt mask */
|
||||
#endif
|
||||
#endif /* defined (USB_OTG_FS) || defined (USB_OTG_HS) */
|
||||
|
||||
/* Private macros ------------------------------------------------------------*/
|
||||
/** @defgroup PCD_Private_Macros PCD Private Macros
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
#endif /* defined (USB_OTG_FS) || defined (USB_OTG_HS) */
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* STM32F4xx_HAL_PCD_H */
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
91
Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_pcd_ex.h
Normal file
91
Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_pcd_ex.h
Normal file
|
|
@ -0,0 +1,91 @@
|
|||
/**
|
||||
******************************************************************************
|
||||
* @file stm32f4xx_hal_pcd_ex.h
|
||||
* @author MCD Application Team
|
||||
* @brief Header file of PCD HAL Extension module.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* <h2><center>© Copyright (c) 2016 STMicroelectronics.
|
||||
* All rights reserved.</center></h2>
|
||||
*
|
||||
* This software component is licensed by ST under BSD 3-Clause license,
|
||||
* the "License"; You may not use this file except in compliance with the
|
||||
* License. You may obtain a copy of the License at:
|
||||
* opensource.org/licenses/BSD-3-Clause
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef STM32F4xx_HAL_PCD_EX_H
|
||||
#define STM32F4xx_HAL_PCD_EX_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "stm32f4xx_hal_def.h"
|
||||
|
||||
#if defined (USB_OTG_FS) || defined (USB_OTG_HS)
|
||||
/** @addtogroup STM32F4xx_HAL_Driver
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup PCDEx
|
||||
* @{
|
||||
*/
|
||||
/* Exported types ------------------------------------------------------------*/
|
||||
/* Exported constants --------------------------------------------------------*/
|
||||
/* Exported macros -----------------------------------------------------------*/
|
||||
/* Exported functions --------------------------------------------------------*/
|
||||
/** @addtogroup PCDEx_Exported_Functions PCDEx Exported Functions
|
||||
* @{
|
||||
*/
|
||||
/** @addtogroup PCDEx_Exported_Functions_Group1 Peripheral Control functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
#if defined (USB_OTG_FS) || defined (USB_OTG_HS)
|
||||
HAL_StatusTypeDef HAL_PCDEx_SetTxFiFo(PCD_HandleTypeDef *hpcd, uint8_t fifo, uint16_t size);
|
||||
HAL_StatusTypeDef HAL_PCDEx_SetRxFiFo(PCD_HandleTypeDef *hpcd, uint16_t size);
|
||||
#endif /* defined (USB_OTG_FS) || defined (USB_OTG_HS) */
|
||||
|
||||
#if defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx)
|
||||
HAL_StatusTypeDef HAL_PCDEx_ActivateLPM(PCD_HandleTypeDef *hpcd);
|
||||
HAL_StatusTypeDef HAL_PCDEx_DeActivateLPM(PCD_HandleTypeDef *hpcd);
|
||||
#endif /* defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx) */
|
||||
#if defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx)
|
||||
HAL_StatusTypeDef HAL_PCDEx_ActivateBCD(PCD_HandleTypeDef *hpcd);
|
||||
HAL_StatusTypeDef HAL_PCDEx_DeActivateBCD(PCD_HandleTypeDef *hpcd);
|
||||
void HAL_PCDEx_BCD_VBUSDetect(PCD_HandleTypeDef *hpcd);
|
||||
#endif /* defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx) */
|
||||
void HAL_PCDEx_LPM_Callback(PCD_HandleTypeDef *hpcd, PCD_LPM_MsgTypeDef msg);
|
||||
void HAL_PCDEx_BCD_Callback(PCD_HandleTypeDef *hpcd, PCD_BCD_MsgTypeDef msg);
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
#endif /* defined (USB_OTG_FS) || defined (USB_OTG_HS) */
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
|
||||
#endif /* STM32F4xx_HAL_PCD_EX_H */
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
765
Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_sd.h
Normal file
765
Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_sd.h
Normal file
|
|
@ -0,0 +1,765 @@
|
|||
/**
|
||||
******************************************************************************
|
||||
* @file stm32f4xx_hal_sd.h
|
||||
* @author MCD Application Team
|
||||
* @brief Header file of SD HAL module.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* <h2><center>© Copyright (c) 2017 STMicroelectronics.
|
||||
* All rights reserved.</center></h2>
|
||||
*
|
||||
* This software component is licensed by ST under BSD 3-Clause license,
|
||||
* the "License"; You may not use this file except in compliance with the
|
||||
* License. You may obtain a copy of the License at:
|
||||
* opensource.org/licenses/BSD-3-Clause
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef __STM32F4xx_HAL_SD_H
|
||||
#define __STM32F4xx_HAL_SD_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) || \
|
||||
defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || \
|
||||
defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F446xx) || \
|
||||
defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || \
|
||||
defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx)
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "stm32f4xx_ll_sdmmc.h"
|
||||
|
||||
/** @addtogroup STM32F4xx_HAL_Driver
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup SD SD
|
||||
* @brief SD HAL module driver
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* Exported types ------------------------------------------------------------*/
|
||||
/** @defgroup SD_Exported_Types SD Exported Types
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup SD_Exported_Types_Group1 SD State enumeration structure
|
||||
* @{
|
||||
*/
|
||||
typedef enum
|
||||
{
|
||||
HAL_SD_STATE_RESET = 0x00000000U, /*!< SD not yet initialized or disabled */
|
||||
HAL_SD_STATE_READY = 0x00000001U, /*!< SD initialized and ready for use */
|
||||
HAL_SD_STATE_TIMEOUT = 0x00000002U, /*!< SD Timeout state */
|
||||
HAL_SD_STATE_BUSY = 0x00000003U, /*!< SD process ongoing */
|
||||
HAL_SD_STATE_PROGRAMMING = 0x00000004U, /*!< SD Programming State */
|
||||
HAL_SD_STATE_RECEIVING = 0x00000005U, /*!< SD Receinving State */
|
||||
HAL_SD_STATE_TRANSFER = 0x00000006U, /*!< SD Transfert State */
|
||||
HAL_SD_STATE_ERROR = 0x0000000FU /*!< SD is in error state */
|
||||
}HAL_SD_StateTypeDef;
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup SD_Exported_Types_Group2 SD Card State enumeration structure
|
||||
* @{
|
||||
*/
|
||||
typedef enum
|
||||
{
|
||||
HAL_SD_CARD_READY = 0x00000001U, /*!< Card state is ready */
|
||||
HAL_SD_CARD_IDENTIFICATION = 0x00000002U, /*!< Card is in identification state */
|
||||
HAL_SD_CARD_STANDBY = 0x00000003U, /*!< Card is in standby state */
|
||||
HAL_SD_CARD_TRANSFER = 0x00000004U, /*!< Card is in transfer state */
|
||||
HAL_SD_CARD_SENDING = 0x00000005U, /*!< Card is sending an operation */
|
||||
HAL_SD_CARD_RECEIVING = 0x00000006U, /*!< Card is receiving operation information */
|
||||
HAL_SD_CARD_PROGRAMMING = 0x00000007U, /*!< Card is in programming state */
|
||||
HAL_SD_CARD_DISCONNECTED = 0x00000008U, /*!< Card is disconnected */
|
||||
HAL_SD_CARD_ERROR = 0x000000FFU /*!< Card response Error */
|
||||
}HAL_SD_CardStateTypeDef;
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup SD_Exported_Types_Group3 SD Handle Structure definition
|
||||
* @{
|
||||
*/
|
||||
#define SD_InitTypeDef SDIO_InitTypeDef
|
||||
#define SD_TypeDef SDIO_TypeDef
|
||||
|
||||
/**
|
||||
* @brief SD Card Information Structure definition
|
||||
*/
|
||||
typedef struct
|
||||
{
|
||||
uint32_t CardType; /*!< Specifies the card Type */
|
||||
|
||||
uint32_t CardVersion; /*!< Specifies the card version */
|
||||
|
||||
uint32_t Class; /*!< Specifies the class of the card class */
|
||||
|
||||
uint32_t RelCardAdd; /*!< Specifies the Relative Card Address */
|
||||
|
||||
uint32_t BlockNbr; /*!< Specifies the Card Capacity in blocks */
|
||||
|
||||
uint32_t BlockSize; /*!< Specifies one block size in bytes */
|
||||
|
||||
uint32_t LogBlockNbr; /*!< Specifies the Card logical Capacity in blocks */
|
||||
|
||||
uint32_t LogBlockSize; /*!< Specifies logical block size in bytes */
|
||||
|
||||
}HAL_SD_CardInfoTypeDef;
|
||||
|
||||
/**
|
||||
* @brief SD handle Structure definition
|
||||
*/
|
||||
typedef struct __SD_HandleTypeDef
|
||||
{
|
||||
SD_TypeDef *Instance; /*!< SD registers base address */
|
||||
|
||||
SD_InitTypeDef Init; /*!< SD required parameters */
|
||||
|
||||
HAL_LockTypeDef Lock; /*!< SD locking object */
|
||||
|
||||
uint32_t *pTxBuffPtr; /*!< Pointer to SD Tx transfer Buffer */
|
||||
|
||||
uint32_t TxXferSize; /*!< SD Tx Transfer size */
|
||||
|
||||
uint32_t *pRxBuffPtr; /*!< Pointer to SD Rx transfer Buffer */
|
||||
|
||||
uint32_t RxXferSize; /*!< SD Rx Transfer size */
|
||||
|
||||
__IO uint32_t Context; /*!< SD transfer context */
|
||||
|
||||
__IO HAL_SD_StateTypeDef State; /*!< SD card State */
|
||||
|
||||
__IO uint32_t ErrorCode; /*!< SD Card Error codes */
|
||||
|
||||
DMA_HandleTypeDef *hdmarx; /*!< SD Rx DMA handle parameters */
|
||||
|
||||
DMA_HandleTypeDef *hdmatx; /*!< SD Tx DMA handle parameters */
|
||||
|
||||
HAL_SD_CardInfoTypeDef SdCard; /*!< SD Card information */
|
||||
|
||||
uint32_t CSD[4]; /*!< SD card specific data table */
|
||||
|
||||
uint32_t CID[4]; /*!< SD card identification number table */
|
||||
|
||||
#if (USE_HAL_SD_REGISTER_CALLBACKS == 1)
|
||||
void (* TxCpltCallback) (struct __SD_HandleTypeDef *hsd);
|
||||
void (* RxCpltCallback) (struct __SD_HandleTypeDef *hsd);
|
||||
void (* ErrorCallback) (struct __SD_HandleTypeDef *hsd);
|
||||
void (* AbortCpltCallback) (struct __SD_HandleTypeDef *hsd);
|
||||
|
||||
void (* MspInitCallback) (struct __SD_HandleTypeDef *hsd);
|
||||
void (* MspDeInitCallback) (struct __SD_HandleTypeDef *hsd);
|
||||
#endif
|
||||
}SD_HandleTypeDef;
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup SD_Exported_Types_Group4 Card Specific Data: CSD Register
|
||||
* @{
|
||||
*/
|
||||
typedef struct
|
||||
{
|
||||
__IO uint8_t CSDStruct; /*!< CSD structure */
|
||||
__IO uint8_t SysSpecVersion; /*!< System specification version */
|
||||
__IO uint8_t Reserved1; /*!< Reserved */
|
||||
__IO uint8_t TAAC; /*!< Data read access time 1 */
|
||||
__IO uint8_t NSAC; /*!< Data read access time 2 in CLK cycles */
|
||||
__IO uint8_t MaxBusClkFrec; /*!< Max. bus clock frequency */
|
||||
__IO uint16_t CardComdClasses; /*!< Card command classes */
|
||||
__IO uint8_t RdBlockLen; /*!< Max. read data block length */
|
||||
__IO uint8_t PartBlockRead; /*!< Partial blocks for read allowed */
|
||||
__IO uint8_t WrBlockMisalign; /*!< Write block misalignment */
|
||||
__IO uint8_t RdBlockMisalign; /*!< Read block misalignment */
|
||||
__IO uint8_t DSRImpl; /*!< DSR implemented */
|
||||
__IO uint8_t Reserved2; /*!< Reserved */
|
||||
__IO uint32_t DeviceSize; /*!< Device Size */
|
||||
__IO uint8_t MaxRdCurrentVDDMin; /*!< Max. read current @ VDD min */
|
||||
__IO uint8_t MaxRdCurrentVDDMax; /*!< Max. read current @ VDD max */
|
||||
__IO uint8_t MaxWrCurrentVDDMin; /*!< Max. write current @ VDD min */
|
||||
__IO uint8_t MaxWrCurrentVDDMax; /*!< Max. write current @ VDD max */
|
||||
__IO uint8_t DeviceSizeMul; /*!< Device size multiplier */
|
||||
__IO uint8_t EraseGrSize; /*!< Erase group size */
|
||||
__IO uint8_t EraseGrMul; /*!< Erase group size multiplier */
|
||||
__IO uint8_t WrProtectGrSize; /*!< Write protect group size */
|
||||
__IO uint8_t WrProtectGrEnable; /*!< Write protect group enable */
|
||||
__IO uint8_t ManDeflECC; /*!< Manufacturer default ECC */
|
||||
__IO uint8_t WrSpeedFact; /*!< Write speed factor */
|
||||
__IO uint8_t MaxWrBlockLen; /*!< Max. write data block length */
|
||||
__IO uint8_t WriteBlockPaPartial; /*!< Partial blocks for write allowed */
|
||||
__IO uint8_t Reserved3; /*!< Reserved */
|
||||
__IO uint8_t ContentProtectAppli; /*!< Content protection application */
|
||||
__IO uint8_t FileFormatGrouop; /*!< File format group */
|
||||
__IO uint8_t CopyFlag; /*!< Copy flag (OTP) */
|
||||
__IO uint8_t PermWrProtect; /*!< Permanent write protection */
|
||||
__IO uint8_t TempWrProtect; /*!< Temporary write protection */
|
||||
__IO uint8_t FileFormat; /*!< File format */
|
||||
__IO uint8_t ECC; /*!< ECC code */
|
||||
__IO uint8_t CSD_CRC; /*!< CSD CRC */
|
||||
__IO uint8_t Reserved4; /*!< Always 1 */
|
||||
|
||||
}HAL_SD_CardCSDTypeDef;
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup SD_Exported_Types_Group5 Card Identification Data: CID Register
|
||||
* @{
|
||||
*/
|
||||
typedef struct
|
||||
{
|
||||
__IO uint8_t ManufacturerID; /*!< Manufacturer ID */
|
||||
__IO uint16_t OEM_AppliID; /*!< OEM/Application ID */
|
||||
__IO uint32_t ProdName1; /*!< Product Name part1 */
|
||||
__IO uint8_t ProdName2; /*!< Product Name part2 */
|
||||
__IO uint8_t ProdRev; /*!< Product Revision */
|
||||
__IO uint32_t ProdSN; /*!< Product Serial Number */
|
||||
__IO uint8_t Reserved1; /*!< Reserved1 */
|
||||
__IO uint16_t ManufactDate; /*!< Manufacturing Date */
|
||||
__IO uint8_t CID_CRC; /*!< CID CRC */
|
||||
__IO uint8_t Reserved2; /*!< Always 1 */
|
||||
|
||||
}HAL_SD_CardCIDTypeDef;
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup SD_Exported_Types_Group6 SD Card Status returned by ACMD13
|
||||
* @{
|
||||
*/
|
||||
typedef struct
|
||||
{
|
||||
__IO uint8_t DataBusWidth; /*!< Shows the currently defined data bus width */
|
||||
__IO uint8_t SecuredMode; /*!< Card is in secured mode of operation */
|
||||
__IO uint16_t CardType; /*!< Carries information about card type */
|
||||
__IO uint32_t ProtectedAreaSize; /*!< Carries information about the capacity of protected area */
|
||||
__IO uint8_t SpeedClass; /*!< Carries information about the speed class of the card */
|
||||
__IO uint8_t PerformanceMove; /*!< Carries information about the card's performance move */
|
||||
__IO uint8_t AllocationUnitSize; /*!< Carries information about the card's allocation unit size */
|
||||
__IO uint16_t EraseSize; /*!< Determines the number of AUs to be erased in one operation */
|
||||
__IO uint8_t EraseTimeout; /*!< Determines the timeout for any number of AU erase */
|
||||
__IO uint8_t EraseOffset; /*!< Carries information about the erase offset */
|
||||
|
||||
}HAL_SD_CardStatusTypeDef;
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#if (USE_HAL_SD_REGISTER_CALLBACKS == 1)
|
||||
/** @defgroup SD_Exported_Types_Group7 SD Callback ID enumeration definition
|
||||
* @{
|
||||
*/
|
||||
typedef enum
|
||||
{
|
||||
HAL_SD_TX_CPLT_CB_ID = 0x00U, /*!< SD Tx Complete Callback ID */
|
||||
HAL_SD_RX_CPLT_CB_ID = 0x01U, /*!< SD Rx Complete Callback ID */
|
||||
HAL_SD_ERROR_CB_ID = 0x02U, /*!< SD Error Callback ID */
|
||||
HAL_SD_ABORT_CB_ID = 0x03U, /*!< SD Abort Callback ID */
|
||||
|
||||
HAL_SD_MSP_INIT_CB_ID = 0x10U, /*!< SD MspInit Callback ID */
|
||||
HAL_SD_MSP_DEINIT_CB_ID = 0x11U /*!< SD MspDeInit Callback ID */
|
||||
}HAL_SD_CallbackIDTypeDef;
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup SD_Exported_Types_Group8 SD Callback pointer definition
|
||||
* @{
|
||||
*/
|
||||
typedef void (*pSD_CallbackTypeDef) (SD_HandleTypeDef *hsd);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
#endif
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported constants --------------------------------------------------------*/
|
||||
/** @defgroup SD_Exported_Constants Exported Constants
|
||||
* @{
|
||||
*/
|
||||
|
||||
#define BLOCKSIZE 512U /*!< Block size is 512 bytes */
|
||||
|
||||
/** @defgroup SD_Exported_Constansts_Group1 SD Error status enumeration Structure definition
|
||||
* @{
|
||||
*/
|
||||
#define HAL_SD_ERROR_NONE SDMMC_ERROR_NONE /*!< No error */
|
||||
#define HAL_SD_ERROR_CMD_CRC_FAIL SDMMC_ERROR_CMD_CRC_FAIL /*!< Command response received (but CRC check failed) */
|
||||
#define HAL_SD_ERROR_DATA_CRC_FAIL SDMMC_ERROR_DATA_CRC_FAIL /*!< Data block sent/received (CRC check failed) */
|
||||
#define HAL_SD_ERROR_CMD_RSP_TIMEOUT SDMMC_ERROR_CMD_RSP_TIMEOUT /*!< Command response timeout */
|
||||
#define HAL_SD_ERROR_DATA_TIMEOUT SDMMC_ERROR_DATA_TIMEOUT /*!< Data timeout */
|
||||
#define HAL_SD_ERROR_TX_UNDERRUN SDMMC_ERROR_TX_UNDERRUN /*!< Transmit FIFO underrun */
|
||||
#define HAL_SD_ERROR_RX_OVERRUN SDMMC_ERROR_RX_OVERRUN /*!< Receive FIFO overrun */
|
||||
#define HAL_SD_ERROR_ADDR_MISALIGNED SDMMC_ERROR_ADDR_MISALIGNED /*!< Misaligned address */
|
||||
#define HAL_SD_ERROR_BLOCK_LEN_ERR SDMMC_ERROR_BLOCK_LEN_ERR /*!< Transferred block length is not allowed for the card or the
|
||||
number of transferred bytes does not match the block length */
|
||||
#define HAL_SD_ERROR_ERASE_SEQ_ERR SDMMC_ERROR_ERASE_SEQ_ERR /*!< An error in the sequence of erase command occurs */
|
||||
#define HAL_SD_ERROR_BAD_ERASE_PARAM SDMMC_ERROR_BAD_ERASE_PARAM /*!< An invalid selection for erase groups */
|
||||
#define HAL_SD_ERROR_WRITE_PROT_VIOLATION SDMMC_ERROR_WRITE_PROT_VIOLATION /*!< Attempt to program a write protect block */
|
||||
#define HAL_SD_ERROR_LOCK_UNLOCK_FAILED SDMMC_ERROR_LOCK_UNLOCK_FAILED /*!< Sequence or password error has been detected in unlock
|
||||
command or if there was an attempt to access a locked card */
|
||||
#define HAL_SD_ERROR_COM_CRC_FAILED SDMMC_ERROR_COM_CRC_FAILED /*!< CRC check of the previous command failed */
|
||||
#define HAL_SD_ERROR_ILLEGAL_CMD SDMMC_ERROR_ILLEGAL_CMD /*!< Command is not legal for the card state */
|
||||
#define HAL_SD_ERROR_CARD_ECC_FAILED SDMMC_ERROR_CARD_ECC_FAILED /*!< Card internal ECC was applied but failed to correct the data */
|
||||
#define HAL_SD_ERROR_CC_ERR SDMMC_ERROR_CC_ERR /*!< Internal card controller error */
|
||||
#define HAL_SD_ERROR_GENERAL_UNKNOWN_ERR SDMMC_ERROR_GENERAL_UNKNOWN_ERR /*!< General or unknown error */
|
||||
#define HAL_SD_ERROR_STREAM_READ_UNDERRUN SDMMC_ERROR_STREAM_READ_UNDERRUN /*!< The card could not sustain data reading in stream rmode */
|
||||
#define HAL_SD_ERROR_STREAM_WRITE_OVERRUN SDMMC_ERROR_STREAM_WRITE_OVERRUN /*!< The card could not sustain data programming in stream mode */
|
||||
#define HAL_SD_ERROR_CID_CSD_OVERWRITE SDMMC_ERROR_CID_CSD_OVERWRITE /*!< CID/CSD overwrite error */
|
||||
#define HAL_SD_ERROR_WP_ERASE_SKIP SDMMC_ERROR_WP_ERASE_SKIP /*!< Only partial address space was erased */
|
||||
#define HAL_SD_ERROR_CARD_ECC_DISABLED SDMMC_ERROR_CARD_ECC_DISABLED /*!< Command has been executed without using internal ECC */
|
||||
#define HAL_SD_ERROR_ERASE_RESET SDMMC_ERROR_ERASE_RESET /*!< Erase sequence was cleared before executing because an out
|
||||
of erase sequence command was received */
|
||||
#define HAL_SD_ERROR_AKE_SEQ_ERR SDMMC_ERROR_AKE_SEQ_ERR /*!< Error in sequence of authentication */
|
||||
#define HAL_SD_ERROR_INVALID_VOLTRANGE SDMMC_ERROR_INVALID_VOLTRANGE /*!< Error in case of invalid voltage range */
|
||||
#define HAL_SD_ERROR_ADDR_OUT_OF_RANGE SDMMC_ERROR_ADDR_OUT_OF_RANGE /*!< Error when addressed block is out of range */
|
||||
#define HAL_SD_ERROR_REQUEST_NOT_APPLICABLE SDMMC_ERROR_REQUEST_NOT_APPLICABLE /*!< Error when command request is not applicable */
|
||||
#define HAL_SD_ERROR_PARAM SDMMC_ERROR_INVALID_PARAMETER /*!< the used parameter is not valid */
|
||||
#define HAL_SD_ERROR_UNSUPPORTED_FEATURE SDMMC_ERROR_UNSUPPORTED_FEATURE /*!< Error when feature is not insupported */
|
||||
#define HAL_SD_ERROR_BUSY SDMMC_ERROR_BUSY /*!< Error when transfer process is busy */
|
||||
#define HAL_SD_ERROR_DMA SDMMC_ERROR_DMA /*!< Error while DMA transfer */
|
||||
#define HAL_SD_ERROR_TIMEOUT SDMMC_ERROR_TIMEOUT /*!< Timeout error */
|
||||
|
||||
#if (USE_HAL_SD_REGISTER_CALLBACKS == 1)
|
||||
#define HAL_SD_ERROR_INVALID_CALLBACK SDMMC_ERROR_INVALID_PARAMETER /*!< Invalid callback error */
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup SD_Exported_Constansts_Group2 SD context enumeration
|
||||
* @{
|
||||
*/
|
||||
#define SD_CONTEXT_NONE 0x00000000U /*!< None */
|
||||
#define SD_CONTEXT_READ_SINGLE_BLOCK 0x00000001U /*!< Read single block operation */
|
||||
#define SD_CONTEXT_READ_MULTIPLE_BLOCK 0x00000002U /*!< Read multiple blocks operation */
|
||||
#define SD_CONTEXT_WRITE_SINGLE_BLOCK 0x00000010U /*!< Write single block operation */
|
||||
#define SD_CONTEXT_WRITE_MULTIPLE_BLOCK 0x00000020U /*!< Write multiple blocks operation */
|
||||
#define SD_CONTEXT_IT 0x00000008U /*!< Process in Interrupt mode */
|
||||
#define SD_CONTEXT_DMA 0x00000080U /*!< Process in DMA mode */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup SD_Exported_Constansts_Group3 SD Supported Memory Cards
|
||||
* @{
|
||||
*/
|
||||
#define CARD_SDSC 0x00000000U
|
||||
#define CARD_SDHC_SDXC 0x00000001U
|
||||
#define CARD_SECURED 0x00000003U
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup SD_Exported_Constansts_Group4 SD Supported Version
|
||||
* @{
|
||||
*/
|
||||
#define CARD_V1_X 0x00000000U
|
||||
#define CARD_V2_X 0x00000001U
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported macro ------------------------------------------------------------*/
|
||||
/** @defgroup SD_Exported_macros SD Exported Macros
|
||||
* @brief macros to handle interrupts and specific clock configurations
|
||||
* @{
|
||||
*/
|
||||
/** @brief Reset SD handle state.
|
||||
* @param __HANDLE__ : SD handle.
|
||||
* @retval None
|
||||
*/
|
||||
#if (USE_HAL_SD_REGISTER_CALLBACKS == 1)
|
||||
#define __HAL_SD_RESET_HANDLE_STATE(__HANDLE__) do { \
|
||||
(__HANDLE__)->State = HAL_SD_STATE_RESET; \
|
||||
(__HANDLE__)->MspInitCallback = NULL; \
|
||||
(__HANDLE__)->MspDeInitCallback = NULL; \
|
||||
} while(0)
|
||||
#else
|
||||
#define __HAL_SD_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_SD_STATE_RESET)
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enable the SD device.
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_SD_ENABLE(__HANDLE__) __SDIO_ENABLE((__HANDLE__)->Instance)
|
||||
|
||||
/**
|
||||
* @brief Disable the SD device.
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_SD_DISABLE(__HANDLE__) __SDIO_DISABLE((__HANDLE__)->Instance)
|
||||
|
||||
/**
|
||||
* @brief Enable the SDMMC DMA transfer.
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_SD_DMA_ENABLE(__HANDLE__) __SDIO_DMA_ENABLE((__HANDLE__)->Instance)
|
||||
|
||||
/**
|
||||
* @brief Disable the SDMMC DMA transfer.
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_SD_DMA_DISABLE(__HANDLE__) __SDIO_DMA_DISABLE((__HANDLE__)->Instance)
|
||||
|
||||
/**
|
||||
* @brief Enable the SD device interrupt.
|
||||
* @param __HANDLE__ SD Handle
|
||||
* @param __INTERRUPT__ specifies the SDMMC interrupt sources to be enabled.
|
||||
* This parameter can be one or a combination of the following values:
|
||||
* @arg SDIO_IT_CCRCFAIL: Command response received (CRC check failed) interrupt
|
||||
* @arg SDIO_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt
|
||||
* @arg SDIO_IT_CTIMEOUT: Command response timeout interrupt
|
||||
* @arg SDIO_IT_DTIMEOUT: Data timeout interrupt
|
||||
* @arg SDIO_IT_TXUNDERR: Transmit FIFO underrun error interrupt
|
||||
* @arg SDIO_IT_RXOVERR: Received FIFO overrun error interrupt
|
||||
* @arg SDIO_IT_CMDREND: Command response received (CRC check passed) interrupt
|
||||
* @arg SDIO_IT_CMDSENT: Command sent (no response required) interrupt
|
||||
* @arg SDIO_IT_DATAEND: Data end (data counter, SDIDCOUNT, is zero) interrupt
|
||||
* @arg SDIO_IT_DBCKEND: Data block sent/received (CRC check passed) interrupt
|
||||
* @arg SDIO_IT_CMDACT: Command transfer in progress interrupt
|
||||
* @arg SDIO_IT_TXACT: Data transmit in progress interrupt
|
||||
* @arg SDIO_IT_RXACT: Data receive in progress interrupt
|
||||
* @arg SDIO_IT_TXFIFOHE: Transmit FIFO Half Empty interrupt
|
||||
* @arg SDIO_IT_RXFIFOHF: Receive FIFO Half Full interrupt
|
||||
* @arg SDIO_IT_TXFIFOF: Transmit FIFO full interrupt
|
||||
* @arg SDIO_IT_RXFIFOF: Receive FIFO full interrupt
|
||||
* @arg SDIO_IT_TXFIFOE: Transmit FIFO empty interrupt
|
||||
* @arg SDIO_IT_RXFIFOE: Receive FIFO empty interrupt
|
||||
* @arg SDIO_IT_TXDAVL: Data available in transmit FIFO interrupt
|
||||
* @arg SDIO_IT_RXDAVL: Data available in receive FIFO interrupt
|
||||
* @arg SDIO_IT_SDIOIT: SD I/O interrupt received interrupt
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_SD_ENABLE_IT(__HANDLE__, __INTERRUPT__) __SDIO_ENABLE_IT((__HANDLE__)->Instance, (__INTERRUPT__))
|
||||
|
||||
/**
|
||||
* @brief Disable the SD device interrupt.
|
||||
* @param __HANDLE__ SD Handle
|
||||
* @param __INTERRUPT__ specifies the SDMMC interrupt sources to be disabled.
|
||||
* This parameter can be one or a combination of the following values:
|
||||
* @arg SDIO_IT_CCRCFAIL: Command response received (CRC check failed) interrupt
|
||||
* @arg SDIO_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt
|
||||
* @arg SDIO_IT_CTIMEOUT: Command response timeout interrupt
|
||||
* @arg SDIO_IT_DTIMEOUT: Data timeout interrupt
|
||||
* @arg SDIO_IT_TXUNDERR: Transmit FIFO underrun error interrupt
|
||||
* @arg SDIO_IT_RXOVERR: Received FIFO overrun error interrupt
|
||||
* @arg SDIO_IT_CMDREND: Command response received (CRC check passed) interrupt
|
||||
* @arg SDIO_IT_CMDSENT: Command sent (no response required) interrupt
|
||||
* @arg SDIO_IT_DATAEND: Data end (data counter, SDIDCOUNT, is zero) interrupt
|
||||
* @arg SDIO_IT_DBCKEND: Data block sent/received (CRC check passed) interrupt
|
||||
* @arg SDIO_IT_CMDACT: Command transfer in progress interrupt
|
||||
* @arg SDIO_IT_TXACT: Data transmit in progress interrupt
|
||||
* @arg SDIO_IT_RXACT: Data receive in progress interrupt
|
||||
* @arg SDIO_IT_TXFIFOHE: Transmit FIFO Half Empty interrupt
|
||||
* @arg SDIO_IT_RXFIFOHF: Receive FIFO Half Full interrupt
|
||||
* @arg SDIO_IT_TXFIFOF: Transmit FIFO full interrupt
|
||||
* @arg SDIO_IT_RXFIFOF: Receive FIFO full interrupt
|
||||
* @arg SDIO_IT_TXFIFOE: Transmit FIFO empty interrupt
|
||||
* @arg SDIO_IT_RXFIFOE: Receive FIFO empty interrupt
|
||||
* @arg SDIO_IT_TXDAVL: Data available in transmit FIFO interrupt
|
||||
* @arg SDIO_IT_RXDAVL: Data available in receive FIFO interrupt
|
||||
* @arg SDIO_IT_SDIOIT: SD I/O interrupt received interrupt
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_SD_DISABLE_IT(__HANDLE__, __INTERRUPT__) __SDIO_DISABLE_IT((__HANDLE__)->Instance, (__INTERRUPT__))
|
||||
|
||||
/**
|
||||
* @brief Check whether the specified SD flag is set or not.
|
||||
* @param __HANDLE__ SD Handle
|
||||
* @param __FLAG__ specifies the flag to check.
|
||||
* This parameter can be one of the following values:
|
||||
* @arg SDIO_FLAG_CCRCFAIL: Command response received (CRC check failed)
|
||||
* @arg SDIO_FLAG_DCRCFAIL: Data block sent/received (CRC check failed)
|
||||
* @arg SDIO_FLAG_CTIMEOUT: Command response timeout
|
||||
* @arg SDIO_FLAG_DTIMEOUT: Data timeout
|
||||
* @arg SDIO_FLAG_TXUNDERR: Transmit FIFO underrun error
|
||||
* @arg SDIO_FLAG_RXOVERR: Received FIFO overrun error
|
||||
* @arg SDIO_FLAG_CMDREND: Command response received (CRC check passed)
|
||||
* @arg SDIO_FLAG_CMDSENT: Command sent (no response required)
|
||||
* @arg SDIO_FLAG_DATAEND: Data end (data counter, SDIDCOUNT, is zero)
|
||||
* @arg SDIO_FLAG_DBCKEND: Data block sent/received (CRC check passed)
|
||||
* @arg SDIO_FLAG_CMDACT: Command transfer in progress
|
||||
* @arg SDIO_FLAG_TXACT: Data transmit in progress
|
||||
* @arg SDIO_FLAG_RXACT: Data receive in progress
|
||||
* @arg SDIO_FLAG_TXFIFOHE: Transmit FIFO Half Empty
|
||||
* @arg SDIO_FLAG_RXFIFOHF: Receive FIFO Half Full
|
||||
* @arg SDIO_FLAG_TXFIFOF: Transmit FIFO full
|
||||
* @arg SDIO_FLAG_RXFIFOF: Receive FIFO full
|
||||
* @arg SDIO_FLAG_TXFIFOE: Transmit FIFO empty
|
||||
* @arg SDIO_FLAG_RXFIFOE: Receive FIFO empty
|
||||
* @arg SDIO_FLAG_TXDAVL: Data available in transmit FIFO
|
||||
* @arg SDIO_FLAG_RXDAVL: Data available in receive FIFO
|
||||
* @arg SDIO_FLAG_SDIOIT: SD I/O interrupt received
|
||||
* @retval The new state of SD FLAG (SET or RESET).
|
||||
*/
|
||||
#define __HAL_SD_GET_FLAG(__HANDLE__, __FLAG__) __SDIO_GET_FLAG((__HANDLE__)->Instance, (__FLAG__))
|
||||
|
||||
/**
|
||||
* @brief Clear the SD's pending flags.
|
||||
* @param __HANDLE__ SD Handle
|
||||
* @param __FLAG__ specifies the flag to clear.
|
||||
* This parameter can be one or a combination of the following values:
|
||||
* @arg SDIO_FLAG_CCRCFAIL: Command response received (CRC check failed)
|
||||
* @arg SDIO_FLAG_DCRCFAIL: Data block sent/received (CRC check failed)
|
||||
* @arg SDIO_FLAG_CTIMEOUT: Command response timeout
|
||||
* @arg SDIO_FLAG_DTIMEOUT: Data timeout
|
||||
* @arg SDIO_FLAG_TXUNDERR: Transmit FIFO underrun error
|
||||
* @arg SDIO_FLAG_RXOVERR: Received FIFO overrun error
|
||||
* @arg SDIO_FLAG_CMDREND: Command response received (CRC check passed)
|
||||
* @arg SDIO_FLAG_CMDSENT: Command sent (no response required)
|
||||
* @arg SDIO_FLAG_DATAEND: Data end (data counter, SDIDCOUNT, is zero)
|
||||
* @arg SDIO_FLAG_DBCKEND: Data block sent/received (CRC check passed)
|
||||
* @arg SDIO_FLAG_SDIOIT: SD I/O interrupt received
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_SD_CLEAR_FLAG(__HANDLE__, __FLAG__) __SDIO_CLEAR_FLAG((__HANDLE__)->Instance, (__FLAG__))
|
||||
|
||||
/**
|
||||
* @brief Check whether the specified SD interrupt has occurred or not.
|
||||
* @param __HANDLE__ SD Handle
|
||||
* @param __INTERRUPT__ specifies the SDMMC interrupt source to check.
|
||||
* This parameter can be one of the following values:
|
||||
* @arg SDIO_IT_CCRCFAIL: Command response received (CRC check failed) interrupt
|
||||
* @arg SDIO_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt
|
||||
* @arg SDIO_IT_CTIMEOUT: Command response timeout interrupt
|
||||
* @arg SDIO_IT_DTIMEOUT: Data timeout interrupt
|
||||
* @arg SDIO_IT_TXUNDERR: Transmit FIFO underrun error interrupt
|
||||
* @arg SDIO_IT_RXOVERR: Received FIFO overrun error interrupt
|
||||
* @arg SDIO_IT_CMDREND: Command response received (CRC check passed) interrupt
|
||||
* @arg SDIO_IT_CMDSENT: Command sent (no response required) interrupt
|
||||
* @arg SDIO_IT_DATAEND: Data end (data counter, SDIDCOUNT, is zero) interrupt
|
||||
* @arg SDIO_IT_DBCKEND: Data block sent/received (CRC check passed) interrupt
|
||||
* @arg SDIO_IT_CMDACT: Command transfer in progress interrupt
|
||||
* @arg SDIO_IT_TXACT: Data transmit in progress interrupt
|
||||
* @arg SDIO_IT_RXACT: Data receive in progress interrupt
|
||||
* @arg SDIO_IT_TXFIFOHE: Transmit FIFO Half Empty interrupt
|
||||
* @arg SDIO_IT_RXFIFOHF: Receive FIFO Half Full interrupt
|
||||
* @arg SDIO_IT_TXFIFOF: Transmit FIFO full interrupt
|
||||
* @arg SDIO_IT_RXFIFOF: Receive FIFO full interrupt
|
||||
* @arg SDIO_IT_TXFIFOE: Transmit FIFO empty interrupt
|
||||
* @arg SDIO_IT_RXFIFOE: Receive FIFO empty interrupt
|
||||
* @arg SDIO_IT_TXDAVL: Data available in transmit FIFO interrupt
|
||||
* @arg SDIO_IT_RXDAVL: Data available in receive FIFO interrupt
|
||||
* @arg SDIO_IT_SDIOIT: SD I/O interrupt received interrupt
|
||||
* @retval The new state of SD IT (SET or RESET).
|
||||
*/
|
||||
#define __HAL_SD_GET_IT(__HANDLE__, __INTERRUPT__) __SDIO_GET_IT((__HANDLE__)->Instance, (__INTERRUPT__))
|
||||
|
||||
/**
|
||||
* @brief Clear the SD's interrupt pending bits.
|
||||
* @param __HANDLE__ SD Handle
|
||||
* @param __INTERRUPT__ specifies the interrupt pending bit to clear.
|
||||
* This parameter can be one or a combination of the following values:
|
||||
* @arg SDIO_IT_CCRCFAIL: Command response received (CRC check failed) interrupt
|
||||
* @arg SDIO_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt
|
||||
* @arg SDIO_IT_CTIMEOUT: Command response timeout interrupt
|
||||
* @arg SDIO_IT_DTIMEOUT: Data timeout interrupt
|
||||
* @arg SDIO_IT_TXUNDERR: Transmit FIFO underrun error interrupt
|
||||
* @arg SDIO_IT_RXOVERR: Received FIFO overrun error interrupt
|
||||
* @arg SDIO_IT_CMDREND: Command response received (CRC check passed) interrupt
|
||||
* @arg SDIO_IT_CMDSENT: Command sent (no response required) interrupt
|
||||
* @arg SDIO_IT_DATAEND: Data end (data counter, SDMMC_DCOUNT, is zero) interrupt
|
||||
* @arg SDIO_IT_SDIOIT: SD I/O interrupt received interrupt
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_SD_CLEAR_IT(__HANDLE__, __INTERRUPT__) __SDIO_CLEAR_IT((__HANDLE__)->Instance, (__INTERRUPT__))
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported functions --------------------------------------------------------*/
|
||||
/** @defgroup SD_Exported_Functions SD Exported Functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup SD_Exported_Functions_Group1 Initialization and de-initialization functions
|
||||
* @{
|
||||
*/
|
||||
HAL_StatusTypeDef HAL_SD_Init(SD_HandleTypeDef *hsd);
|
||||
HAL_StatusTypeDef HAL_SD_InitCard(SD_HandleTypeDef *hsd);
|
||||
HAL_StatusTypeDef HAL_SD_DeInit (SD_HandleTypeDef *hsd);
|
||||
void HAL_SD_MspInit(SD_HandleTypeDef *hsd);
|
||||
void HAL_SD_MspDeInit(SD_HandleTypeDef *hsd);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup SD_Exported_Functions_Group2 Input and Output operation functions
|
||||
* @{
|
||||
*/
|
||||
/* Blocking mode: Polling */
|
||||
HAL_StatusTypeDef HAL_SD_ReadBlocks(SD_HandleTypeDef *hsd, uint8_t *pData, uint32_t BlockAdd, uint32_t NumberOfBlocks, uint32_t Timeout);
|
||||
HAL_StatusTypeDef HAL_SD_WriteBlocks(SD_HandleTypeDef *hsd, uint8_t *pData, uint32_t BlockAdd, uint32_t NumberOfBlocks, uint32_t Timeout);
|
||||
HAL_StatusTypeDef HAL_SD_Erase(SD_HandleTypeDef *hsd, uint32_t BlockStartAdd, uint32_t BlockEndAdd);
|
||||
/* Non-Blocking mode: IT */
|
||||
HAL_StatusTypeDef HAL_SD_ReadBlocks_IT(SD_HandleTypeDef *hsd, uint8_t *pData, uint32_t BlockAdd, uint32_t NumberOfBlocks);
|
||||
HAL_StatusTypeDef HAL_SD_WriteBlocks_IT(SD_HandleTypeDef *hsd, uint8_t *pData, uint32_t BlockAdd, uint32_t NumberOfBlocks);
|
||||
/* Non-Blocking mode: DMA */
|
||||
HAL_StatusTypeDef HAL_SD_ReadBlocks_DMA(SD_HandleTypeDef *hsd, uint8_t *pData, uint32_t BlockAdd, uint32_t NumberOfBlocks);
|
||||
HAL_StatusTypeDef HAL_SD_WriteBlocks_DMA(SD_HandleTypeDef *hsd, uint8_t *pData, uint32_t BlockAdd, uint32_t NumberOfBlocks);
|
||||
|
||||
void HAL_SD_IRQHandler(SD_HandleTypeDef *hsd);
|
||||
|
||||
/* Callback in non blocking modes (DMA) */
|
||||
void HAL_SD_TxCpltCallback(SD_HandleTypeDef *hsd);
|
||||
void HAL_SD_RxCpltCallback(SD_HandleTypeDef *hsd);
|
||||
void HAL_SD_ErrorCallback(SD_HandleTypeDef *hsd);
|
||||
void HAL_SD_AbortCallback(SD_HandleTypeDef *hsd);
|
||||
|
||||
#if (USE_HAL_SD_REGISTER_CALLBACKS == 1)
|
||||
/* SD callback registering/unregistering */
|
||||
HAL_StatusTypeDef HAL_SD_RegisterCallback (SD_HandleTypeDef *hsd, HAL_SD_CallbackIDTypeDef CallbackId, pSD_CallbackTypeDef pCallback);
|
||||
HAL_StatusTypeDef HAL_SD_UnRegisterCallback(SD_HandleTypeDef *hsd, HAL_SD_CallbackIDTypeDef CallbackId);
|
||||
#endif
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup SD_Exported_Functions_Group3 Peripheral Control functions
|
||||
* @{
|
||||
*/
|
||||
HAL_StatusTypeDef HAL_SD_ConfigWideBusOperation(SD_HandleTypeDef *hsd, uint32_t WideMode);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup SD_Exported_Functions_Group4 SD card related functions
|
||||
* @{
|
||||
*/
|
||||
HAL_StatusTypeDef HAL_SD_SendSDStatus(SD_HandleTypeDef *hsd, uint32_t *pSDstatus);
|
||||
HAL_SD_CardStateTypeDef HAL_SD_GetCardState(SD_HandleTypeDef *hsd);
|
||||
HAL_StatusTypeDef HAL_SD_GetCardCID(SD_HandleTypeDef *hsd, HAL_SD_CardCIDTypeDef *pCID);
|
||||
HAL_StatusTypeDef HAL_SD_GetCardCSD(SD_HandleTypeDef *hsd, HAL_SD_CardCSDTypeDef *pCSD);
|
||||
HAL_StatusTypeDef HAL_SD_GetCardStatus(SD_HandleTypeDef *hsd, HAL_SD_CardStatusTypeDef *pStatus);
|
||||
HAL_StatusTypeDef HAL_SD_GetCardInfo(SD_HandleTypeDef *hsd, HAL_SD_CardInfoTypeDef *pCardInfo);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup SD_Exported_Functions_Group5 Peripheral State and Errors functions
|
||||
* @{
|
||||
*/
|
||||
HAL_SD_StateTypeDef HAL_SD_GetState(SD_HandleTypeDef *hsd);
|
||||
uint32_t HAL_SD_GetError(SD_HandleTypeDef *hsd);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup SD_Exported_Functions_Group6 Perioheral Abort management
|
||||
* @{
|
||||
*/
|
||||
HAL_StatusTypeDef HAL_SD_Abort(SD_HandleTypeDef *hsd);
|
||||
HAL_StatusTypeDef HAL_SD_Abort_IT(SD_HandleTypeDef *hsd);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Private types -------------------------------------------------------------*/
|
||||
/** @defgroup SD_Private_Types SD Private Types
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Private defines -----------------------------------------------------------*/
|
||||
/** @defgroup SD_Private_Defines SD Private Defines
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Private variables ---------------------------------------------------------*/
|
||||
/** @defgroup SD_Private_Variables SD Private Variables
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Private constants ---------------------------------------------------------*/
|
||||
/** @defgroup SD_Private_Constants SD Private Constants
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Private macros ------------------------------------------------------------*/
|
||||
/** @defgroup SD_Private_Macros SD Private Macros
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Private functions prototypes ----------------------------------------------*/
|
||||
/** @defgroup SD_Private_Functions_Prototypes SD Private Functions Prototypes
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Private functions ---------------------------------------------------------*/
|
||||
/** @defgroup SD_Private_Functions SD Private Functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx ||
|
||||
STM32F401xC || STM32F401xE || STM32F411xE || STM32F446xx || STM32F469xx || STM32F479xx || STM32F412Zx || STM32F412Vx ||
|
||||
STM32F412Rx || STM32F412Cx || STM32F413xx || STM32F423xx */
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
|
||||
#endif /* __STM32F4xx_HAL_SD_H */
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
232
Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_sram.h
Normal file
232
Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_sram.h
Normal file
|
|
@ -0,0 +1,232 @@
|
|||
/**
|
||||
******************************************************************************
|
||||
* @file stm32f4xx_hal_sram.h
|
||||
* @author MCD Application Team
|
||||
* @brief Header file of SRAM HAL module.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* <h2><center>© Copyright (c) 2017 STMicroelectronics.
|
||||
* All rights reserved.</center></h2>
|
||||
*
|
||||
* This software component is licensed by ST under BSD 3-Clause license,
|
||||
* the "License"; You may not use this file except in compliance with the
|
||||
* License. You may obtain a copy of the License at:
|
||||
* opensource.org/licenses/BSD-3-Clause
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef __STM32F4xx_HAL_SRAM_H
|
||||
#define __STM32F4xx_HAL_SRAM_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) || defined(STM32F412Zx) ||\
|
||||
defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F413xx) || defined(STM32F423xx)
|
||||
#include "stm32f4xx_ll_fsmc.h"
|
||||
#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F413xx || STM32F423xx */
|
||||
|
||||
#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx) ||\
|
||||
defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx)
|
||||
#include "stm32f4xx_ll_fmc.h"
|
||||
#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx || STM32F469xx || STM32F479xx */
|
||||
|
||||
|
||||
/** @addtogroup STM32F4xx_HAL_Driver
|
||||
* @{
|
||||
*/
|
||||
|
||||
#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) ||\
|
||||
defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\
|
||||
defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) ||\
|
||||
defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F413xx) || defined(STM32F423xx)
|
||||
|
||||
/** @addtogroup SRAM
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* Exported typedef ----------------------------------------------------------*/
|
||||
|
||||
/** @defgroup SRAM_Exported_Types SRAM Exported Types
|
||||
* @{
|
||||
*/
|
||||
/**
|
||||
* @brief HAL SRAM State structures definition
|
||||
*/
|
||||
typedef enum
|
||||
{
|
||||
HAL_SRAM_STATE_RESET = 0x00U, /*!< SRAM not yet initialized or disabled */
|
||||
HAL_SRAM_STATE_READY = 0x01U, /*!< SRAM initialized and ready for use */
|
||||
HAL_SRAM_STATE_BUSY = 0x02U, /*!< SRAM internal process is ongoing */
|
||||
HAL_SRAM_STATE_ERROR = 0x03U, /*!< SRAM error state */
|
||||
HAL_SRAM_STATE_PROTECTED = 0x04U /*!< SRAM peripheral NORSRAM device write protected */
|
||||
|
||||
} HAL_SRAM_StateTypeDef;
|
||||
|
||||
/**
|
||||
* @brief SRAM handle Structure definition
|
||||
*/
|
||||
#if (USE_HAL_SRAM_REGISTER_CALLBACKS == 1)
|
||||
typedef struct __SRAM_HandleTypeDef
|
||||
#else
|
||||
typedef struct
|
||||
#endif /* USE_HAL_SRAM_REGISTER_CALLBACKS */
|
||||
{
|
||||
FMC_NORSRAM_TypeDef *Instance; /*!< Register base address */
|
||||
|
||||
FMC_NORSRAM_EXTENDED_TypeDef *Extended; /*!< Extended mode register base address */
|
||||
|
||||
FMC_NORSRAM_InitTypeDef Init; /*!< SRAM device control configuration parameters */
|
||||
|
||||
HAL_LockTypeDef Lock; /*!< SRAM locking object */
|
||||
|
||||
__IO HAL_SRAM_StateTypeDef State; /*!< SRAM device access state */
|
||||
|
||||
DMA_HandleTypeDef *hdma; /*!< Pointer DMA handler */
|
||||
|
||||
#if (USE_HAL_SRAM_REGISTER_CALLBACKS == 1)
|
||||
void (* MspInitCallback) ( struct __SRAM_HandleTypeDef * hsram); /*!< SRAM Msp Init callback */
|
||||
void (* MspDeInitCallback) ( struct __SRAM_HandleTypeDef * hsram); /*!< SRAM Msp DeInit callback */
|
||||
void (* DmaXferCpltCallback) ( DMA_HandleTypeDef * hdma); /*!< SRAM DMA Xfer Complete callback */
|
||||
void (* DmaXferErrorCallback) ( DMA_HandleTypeDef * hdma); /*!< SRAM DMA Xfer Error callback */
|
||||
#endif
|
||||
} SRAM_HandleTypeDef;
|
||||
|
||||
#if (USE_HAL_SRAM_REGISTER_CALLBACKS == 1)
|
||||
/**
|
||||
* @brief HAL SRAM Callback ID enumeration definition
|
||||
*/
|
||||
typedef enum
|
||||
{
|
||||
HAL_SRAM_MSP_INIT_CB_ID = 0x00U, /*!< SRAM MspInit Callback ID */
|
||||
HAL_SRAM_MSP_DEINIT_CB_ID = 0x01U, /*!< SRAM MspDeInit Callback ID */
|
||||
HAL_SRAM_DMA_XFER_CPLT_CB_ID = 0x02U, /*!< SRAM DMA Xfer Complete Callback ID */
|
||||
HAL_SRAM_DMA_XFER_ERR_CB_ID = 0x03U /*!< SRAM DMA Xfer Complete Callback ID */
|
||||
}HAL_SRAM_CallbackIDTypeDef;
|
||||
|
||||
/**
|
||||
* @brief HAL SRAM Callback pointer definition
|
||||
*/
|
||||
typedef void (*pSRAM_CallbackTypeDef)(SRAM_HandleTypeDef *hsram);
|
||||
typedef void (*pSRAM_DmaCallbackTypeDef)(DMA_HandleTypeDef *hdma);
|
||||
#endif
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported constants --------------------------------------------------------*/
|
||||
/* Exported macro ------------------------------------------------------------*/
|
||||
|
||||
/** @defgroup SRAM_Exported_Macros SRAM Exported Macros
|
||||
* @{
|
||||
*/
|
||||
/** @brief Reset SRAM handle state
|
||||
* @param __HANDLE__ SRAM handle
|
||||
* @retval None
|
||||
*/
|
||||
#if (USE_HAL_SRAM_REGISTER_CALLBACKS == 1)
|
||||
#define __HAL_SRAM_RESET_HANDLE_STATE(__HANDLE__) do { \
|
||||
(__HANDLE__)->State = HAL_SRAM_STATE_RESET; \
|
||||
(__HANDLE__)->MspInitCallback = NULL; \
|
||||
(__HANDLE__)->MspDeInitCallback = NULL; \
|
||||
} while(0)
|
||||
#else
|
||||
#define __HAL_SRAM_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_SRAM_STATE_RESET)
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
/* Exported functions --------------------------------------------------------*/
|
||||
|
||||
/** @addtogroup SRAM_Exported_Functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup SRAM_Exported_Functions_Group1
|
||||
* @{
|
||||
*/
|
||||
/* Initialization/de-initialization functions **********************************/
|
||||
HAL_StatusTypeDef HAL_SRAM_Init(SRAM_HandleTypeDef *hsram, FMC_NORSRAM_TimingTypeDef *Timing, FMC_NORSRAM_TimingTypeDef *ExtTiming);
|
||||
HAL_StatusTypeDef HAL_SRAM_DeInit(SRAM_HandleTypeDef *hsram);
|
||||
void HAL_SRAM_MspInit(SRAM_HandleTypeDef *hsram);
|
||||
void HAL_SRAM_MspDeInit(SRAM_HandleTypeDef *hsram);
|
||||
|
||||
void HAL_SRAM_DMA_XferCpltCallback(DMA_HandleTypeDef *hdma);
|
||||
void HAL_SRAM_DMA_XferErrorCallback(DMA_HandleTypeDef *hdma);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup SRAM_Exported_Functions_Group2
|
||||
* @{
|
||||
*/
|
||||
/* I/O operation functions *****************************************************/
|
||||
HAL_StatusTypeDef HAL_SRAM_Read_8b(SRAM_HandleTypeDef *hsram, uint32_t *pAddress, uint8_t *pDstBuffer, uint32_t BufferSize);
|
||||
HAL_StatusTypeDef HAL_SRAM_Write_8b(SRAM_HandleTypeDef *hsram, uint32_t *pAddress, uint8_t *pSrcBuffer, uint32_t BufferSize);
|
||||
HAL_StatusTypeDef HAL_SRAM_Read_16b(SRAM_HandleTypeDef *hsram, uint32_t *pAddress, uint16_t *pDstBuffer, uint32_t BufferSize);
|
||||
HAL_StatusTypeDef HAL_SRAM_Write_16b(SRAM_HandleTypeDef *hsram, uint32_t *pAddress, uint16_t *pSrcBuffer, uint32_t BufferSize);
|
||||
HAL_StatusTypeDef HAL_SRAM_Read_32b(SRAM_HandleTypeDef *hsram, uint32_t *pAddress, uint32_t *pDstBuffer, uint32_t BufferSize);
|
||||
HAL_StatusTypeDef HAL_SRAM_Write_32b(SRAM_HandleTypeDef *hsram, uint32_t *pAddress, uint32_t *pSrcBuffer, uint32_t BufferSize);
|
||||
HAL_StatusTypeDef HAL_SRAM_Read_DMA(SRAM_HandleTypeDef *hsram, uint32_t *pAddress, uint32_t *pDstBuffer, uint32_t BufferSize);
|
||||
HAL_StatusTypeDef HAL_SRAM_Write_DMA(SRAM_HandleTypeDef *hsram, uint32_t *pAddress, uint32_t *pSrcBuffer, uint32_t BufferSize);
|
||||
#if (USE_HAL_SRAM_REGISTER_CALLBACKS == 1)
|
||||
/* SRAM callback registering/unregistering */
|
||||
HAL_StatusTypeDef HAL_SRAM_RegisterCallback(SRAM_HandleTypeDef *hsram, HAL_SRAM_CallbackIDTypeDef CallbackId, pSRAM_CallbackTypeDef pCallback);
|
||||
HAL_StatusTypeDef HAL_SRAM_UnRegisterCallback(SRAM_HandleTypeDef *hsram, HAL_SRAM_CallbackIDTypeDef CallbackId);
|
||||
HAL_StatusTypeDef HAL_SRAM_RegisterDmaCallback(SRAM_HandleTypeDef *hsram, HAL_SRAM_CallbackIDTypeDef CallbackId, pSRAM_DmaCallbackTypeDef pCallback);
|
||||
#endif
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup SRAM_Exported_Functions_Group3
|
||||
* @{
|
||||
*/
|
||||
/* SRAM Control functions ******************************************************/
|
||||
HAL_StatusTypeDef HAL_SRAM_WriteOperation_Enable(SRAM_HandleTypeDef *hsram);
|
||||
HAL_StatusTypeDef HAL_SRAM_WriteOperation_Disable(SRAM_HandleTypeDef *hsram);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup SRAM_Exported_Functions_Group4
|
||||
* @{
|
||||
*/
|
||||
/* SRAM State functions *********************************************************/
|
||||
HAL_SRAM_StateTypeDef HAL_SRAM_GetState(SRAM_HandleTypeDef *hsram);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Private types -------------------------------------------------------------*/
|
||||
/* Private variables ---------------------------------------------------------*/
|
||||
/* Private constants ---------------------------------------------------------*/
|
||||
/* Private macros ------------------------------------------------------------*/
|
||||
/* Private functions ---------------------------------------------------------*/
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F427xx || STM32F437xx ||\
|
||||
STM32F429xx || STM32F439xx || STM32F446xx || STM32F469xx || STM32F479xx || STM32F412Zx ||\
|
||||
STM32F412Vx || STM32F412Rx || STM32F413xx || STM32F423xx */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* __STM32F4xx_HAL_SRAM_H */
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
1033
Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_fsmc.h
Normal file
1033
Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_fsmc.h
Normal file
File diff suppressed because it is too large
Load diff
1117
Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_sdmmc.h
Normal file
1117
Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_sdmmc.h
Normal file
File diff suppressed because it is too large
Load diff
511
Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_usb.h
Normal file
511
Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_usb.h
Normal file
|
|
@ -0,0 +1,511 @@
|
|||
/**
|
||||
******************************************************************************
|
||||
* @file stm32f4xx_ll_usb.h
|
||||
* @author MCD Application Team
|
||||
* @brief Header file of USB Low Layer HAL module.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* <h2><center>© Copyright (c) 2016 STMicroelectronics.
|
||||
* All rights reserved.</center></h2>
|
||||
*
|
||||
* This software component is licensed by ST under BSD 3-Clause license,
|
||||
* the "License"; You may not use this file except in compliance with the
|
||||
* License. You may obtain a copy of the License at:
|
||||
* opensource.org/licenses/BSD-3-Clause
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef STM32F4xx_LL_USB_H
|
||||
#define STM32F4xx_LL_USB_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "stm32f4xx_hal_def.h"
|
||||
|
||||
#if defined (USB_OTG_FS) || defined (USB_OTG_HS)
|
||||
/** @addtogroup STM32F4xx_HAL_Driver
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup USB_LL
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* Exported types ------------------------------------------------------------*/
|
||||
|
||||
/**
|
||||
* @brief USB Mode definition
|
||||
*/
|
||||
#if defined (USB_OTG_FS) || defined (USB_OTG_HS)
|
||||
|
||||
typedef enum
|
||||
{
|
||||
USB_DEVICE_MODE = 0,
|
||||
USB_HOST_MODE = 1,
|
||||
USB_DRD_MODE = 2
|
||||
} USB_OTG_ModeTypeDef;
|
||||
|
||||
/**
|
||||
* @brief URB States definition
|
||||
*/
|
||||
typedef enum
|
||||
{
|
||||
URB_IDLE = 0,
|
||||
URB_DONE,
|
||||
URB_NOTREADY,
|
||||
URB_NYET,
|
||||
URB_ERROR,
|
||||
URB_STALL
|
||||
} USB_OTG_URBStateTypeDef;
|
||||
|
||||
/**
|
||||
* @brief Host channel States definition
|
||||
*/
|
||||
typedef enum
|
||||
{
|
||||
HC_IDLE = 0,
|
||||
HC_XFRC,
|
||||
HC_HALTED,
|
||||
HC_NAK,
|
||||
HC_NYET,
|
||||
HC_STALL,
|
||||
HC_XACTERR,
|
||||
HC_BBLERR,
|
||||
HC_DATATGLERR
|
||||
} USB_OTG_HCStateTypeDef;
|
||||
|
||||
/**
|
||||
* @brief USB OTG Initialization Structure definition
|
||||
*/
|
||||
typedef struct
|
||||
{
|
||||
uint32_t dev_endpoints; /*!< Device Endpoints number.
|
||||
This parameter depends on the used USB core.
|
||||
This parameter must be a number between Min_Data = 1 and Max_Data = 15 */
|
||||
|
||||
uint32_t Host_channels; /*!< Host Channels number.
|
||||
This parameter Depends on the used USB core.
|
||||
This parameter must be a number between Min_Data = 1 and Max_Data = 15 */
|
||||
|
||||
uint32_t speed; /*!< USB Core speed.
|
||||
This parameter can be any value of @ref USB_Core_Speed_ */
|
||||
|
||||
uint32_t dma_enable; /*!< Enable or disable of the USB embedded DMA used only for OTG HS. */
|
||||
|
||||
uint32_t ep0_mps; /*!< Set the Endpoint 0 Max Packet size. */
|
||||
|
||||
uint32_t phy_itface; /*!< Select the used PHY interface.
|
||||
This parameter can be any value of @ref USB_Core_PHY_ */
|
||||
|
||||
uint32_t Sof_enable; /*!< Enable or disable the output of the SOF signal. */
|
||||
|
||||
uint32_t low_power_enable; /*!< Enable or disable the low power mode. */
|
||||
|
||||
uint32_t lpm_enable; /*!< Enable or disable Link Power Management. */
|
||||
|
||||
uint32_t battery_charging_enable; /*!< Enable or disable Battery charging. */
|
||||
|
||||
uint32_t vbus_sensing_enable; /*!< Enable or disable the VBUS Sensing feature. */
|
||||
|
||||
uint32_t use_dedicated_ep1; /*!< Enable or disable the use of the dedicated EP1 interrupt. */
|
||||
|
||||
uint32_t use_external_vbus; /*!< Enable or disable the use of the external VBUS. */
|
||||
} USB_OTG_CfgTypeDef;
|
||||
|
||||
typedef struct
|
||||
{
|
||||
uint8_t num; /*!< Endpoint number
|
||||
This parameter must be a number between Min_Data = 1 and Max_Data = 15 */
|
||||
|
||||
uint8_t is_in; /*!< Endpoint direction
|
||||
This parameter must be a number between Min_Data = 0 and Max_Data = 1 */
|
||||
|
||||
uint8_t is_stall; /*!< Endpoint stall condition
|
||||
This parameter must be a number between Min_Data = 0 and Max_Data = 1 */
|
||||
|
||||
uint8_t type; /*!< Endpoint type
|
||||
This parameter can be any value of @ref USB_EP_Type_ */
|
||||
|
||||
uint8_t data_pid_start; /*!< Initial data PID
|
||||
This parameter must be a number between Min_Data = 0 and Max_Data = 1 */
|
||||
|
||||
uint8_t even_odd_frame; /*!< IFrame parity
|
||||
This parameter must be a number between Min_Data = 0 and Max_Data = 1 */
|
||||
|
||||
uint16_t tx_fifo_num; /*!< Transmission FIFO number
|
||||
This parameter must be a number between Min_Data = 1 and Max_Data = 15 */
|
||||
|
||||
uint32_t maxpacket; /*!< Endpoint Max packet size
|
||||
This parameter must be a number between Min_Data = 0 and Max_Data = 64KB */
|
||||
|
||||
uint8_t *xfer_buff; /*!< Pointer to transfer buffer */
|
||||
|
||||
uint32_t dma_addr; /*!< 32 bits aligned transfer buffer address */
|
||||
|
||||
uint32_t xfer_len; /*!< Current transfer length */
|
||||
|
||||
uint32_t xfer_count; /*!< Partial transfer length in case of multi packet transfer */
|
||||
} USB_OTG_EPTypeDef;
|
||||
|
||||
typedef struct
|
||||
{
|
||||
uint8_t dev_addr ; /*!< USB device address.
|
||||
This parameter must be a number between Min_Data = 1 and Max_Data = 255 */
|
||||
|
||||
uint8_t ch_num; /*!< Host channel number.
|
||||
This parameter must be a number between Min_Data = 1 and Max_Data = 15 */
|
||||
|
||||
uint8_t ep_num; /*!< Endpoint number.
|
||||
This parameter must be a number between Min_Data = 1 and Max_Data = 15 */
|
||||
|
||||
uint8_t ep_is_in; /*!< Endpoint direction
|
||||
This parameter must be a number between Min_Data = 0 and Max_Data = 1 */
|
||||
|
||||
uint8_t speed; /*!< USB Host speed.
|
||||
This parameter can be any value of @ref USB_Core_Speed_ */
|
||||
|
||||
uint8_t do_ping; /*!< Enable or disable the use of the PING protocol for HS mode. */
|
||||
|
||||
uint8_t process_ping; /*!< Execute the PING protocol for HS mode. */
|
||||
|
||||
uint8_t ep_type; /*!< Endpoint Type.
|
||||
This parameter can be any value of @ref USB_EP_Type_ */
|
||||
|
||||
uint16_t max_packet; /*!< Endpoint Max packet size.
|
||||
This parameter must be a number between Min_Data = 0 and Max_Data = 64KB */
|
||||
|
||||
uint8_t data_pid; /*!< Initial data PID.
|
||||
This parameter must be a number between Min_Data = 0 and Max_Data = 1 */
|
||||
|
||||
uint8_t *xfer_buff; /*!< Pointer to transfer buffer. */
|
||||
|
||||
uint32_t xfer_len; /*!< Current transfer length. */
|
||||
|
||||
uint32_t xfer_count; /*!< Partial transfer length in case of multi packet transfer. */
|
||||
|
||||
uint8_t toggle_in; /*!< IN transfer current toggle flag.
|
||||
This parameter must be a number between Min_Data = 0 and Max_Data = 1 */
|
||||
|
||||
uint8_t toggle_out; /*!< OUT transfer current toggle flag
|
||||
This parameter must be a number between Min_Data = 0 and Max_Data = 1 */
|
||||
|
||||
uint32_t dma_addr; /*!< 32 bits aligned transfer buffer address. */
|
||||
|
||||
uint32_t ErrCnt; /*!< Host channel error count.*/
|
||||
|
||||
USB_OTG_URBStateTypeDef urb_state; /*!< URB state.
|
||||
This parameter can be any value of @ref USB_OTG_URBStateTypeDef */
|
||||
|
||||
USB_OTG_HCStateTypeDef state; /*!< Host Channel state.
|
||||
This parameter can be any value of @ref USB_OTG_HCStateTypeDef */
|
||||
} USB_OTG_HCTypeDef;
|
||||
#endif /* defined (USB_OTG_FS) || defined (USB_OTG_HS) */
|
||||
|
||||
|
||||
/* Exported constants --------------------------------------------------------*/
|
||||
|
||||
/** @defgroup PCD_Exported_Constants PCD Exported Constants
|
||||
* @{
|
||||
*/
|
||||
|
||||
#if defined (USB_OTG_FS) || defined (USB_OTG_HS)
|
||||
/** @defgroup USB_OTG_CORE VERSION ID
|
||||
* @{
|
||||
*/
|
||||
#define USB_OTG_CORE_ID_300A 0x4F54300AU
|
||||
#define USB_OTG_CORE_ID_310A 0x4F54310AU
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup USB_Core_Mode_ USB Core Mode
|
||||
* @{
|
||||
*/
|
||||
#define USB_OTG_MODE_DEVICE 0U
|
||||
#define USB_OTG_MODE_HOST 1U
|
||||
#define USB_OTG_MODE_DRD 2U
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup USB_LL Device Speed
|
||||
* @{
|
||||
*/
|
||||
#define USBD_HS_SPEED 0U
|
||||
#define USBD_HSINFS_SPEED 1U
|
||||
#define USBH_HS_SPEED 0U
|
||||
#define USBD_FS_SPEED 2U
|
||||
#define USBH_FS_SPEED 1U
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup USB_LL_Core_Speed USB Low Layer Core Speed
|
||||
* @{
|
||||
*/
|
||||
#define USB_OTG_SPEED_HIGH 0U
|
||||
#define USB_OTG_SPEED_HIGH_IN_FULL 1U
|
||||
#define USB_OTG_SPEED_FULL 3U
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup USB_LL_Core_PHY USB Low Layer Core PHY
|
||||
* @{
|
||||
*/
|
||||
#define USB_OTG_ULPI_PHY 1U
|
||||
#define USB_OTG_EMBEDDED_PHY 2U
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup USB_LL_Turnaround_Timeout Turnaround Timeout Value
|
||||
* @{
|
||||
*/
|
||||
#ifndef USBD_HS_TRDT_VALUE
|
||||
#define USBD_HS_TRDT_VALUE 9U
|
||||
#endif /* USBD_HS_TRDT_VALUE */
|
||||
#ifndef USBD_FS_TRDT_VALUE
|
||||
#define USBD_FS_TRDT_VALUE 5U
|
||||
#define USBD_DEFAULT_TRDT_VALUE 9U
|
||||
#endif /* USBD_HS_TRDT_VALUE */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup USB_LL_Core_MPS USB Low Layer Core MPS
|
||||
* @{
|
||||
*/
|
||||
#define USB_OTG_HS_MAX_PACKET_SIZE 512U
|
||||
#define USB_OTG_FS_MAX_PACKET_SIZE 64U
|
||||
#define USB_OTG_MAX_EP0_SIZE 64U
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup USB_LL_Core_PHY_Frequency USB Low Layer Core PHY Frequency
|
||||
* @{
|
||||
*/
|
||||
#define DSTS_ENUMSPD_HS_PHY_30MHZ_OR_60MHZ (0U << 1)
|
||||
#define DSTS_ENUMSPD_FS_PHY_30MHZ_OR_60MHZ (1U << 1)
|
||||
#define DSTS_ENUMSPD_LS_PHY_6MHZ (2U << 1)
|
||||
#define DSTS_ENUMSPD_FS_PHY_48MHZ (3U << 1)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup USB_LL_CORE_Frame_Interval USB Low Layer Core Frame Interval
|
||||
* @{
|
||||
*/
|
||||
#define DCFG_FRAME_INTERVAL_80 0U
|
||||
#define DCFG_FRAME_INTERVAL_85 1U
|
||||
#define DCFG_FRAME_INTERVAL_90 2U
|
||||
#define DCFG_FRAME_INTERVAL_95 3U
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup USB_LL_EP0_MPS USB Low Layer EP0 MPS
|
||||
* @{
|
||||
*/
|
||||
#define DEP0CTL_MPS_64 0U
|
||||
#define DEP0CTL_MPS_32 1U
|
||||
#define DEP0CTL_MPS_16 2U
|
||||
#define DEP0CTL_MPS_8 3U
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup USB_LL_EP_Speed USB Low Layer EP Speed
|
||||
* @{
|
||||
*/
|
||||
#define EP_SPEED_LOW 0U
|
||||
#define EP_SPEED_FULL 1U
|
||||
#define EP_SPEED_HIGH 2U
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup USB_LL_EP_Type USB Low Layer EP Type
|
||||
* @{
|
||||
*/
|
||||
#define EP_TYPE_CTRL 0U
|
||||
#define EP_TYPE_ISOC 1U
|
||||
#define EP_TYPE_BULK 2U
|
||||
#define EP_TYPE_INTR 3U
|
||||
#define EP_TYPE_MSK 3U
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup USB_LL_STS_Defines USB Low Layer STS Defines
|
||||
* @{
|
||||
*/
|
||||
#define STS_GOUT_NAK 1U
|
||||
#define STS_DATA_UPDT 2U
|
||||
#define STS_XFER_COMP 3U
|
||||
#define STS_SETUP_COMP 4U
|
||||
#define STS_SETUP_UPDT 6U
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup USB_LL_HCFG_SPEED_Defines USB Low Layer HCFG Speed Defines
|
||||
* @{
|
||||
*/
|
||||
#define HCFG_30_60_MHZ 0U
|
||||
#define HCFG_48_MHZ 1U
|
||||
#define HCFG_6_MHZ 2U
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup USB_LL_HPRT0_PRTSPD_SPEED_Defines USB Low Layer HPRT0 PRTSPD Speed Defines
|
||||
* @{
|
||||
*/
|
||||
#define HPRT0_PRTSPD_HIGH_SPEED 0U
|
||||
#define HPRT0_PRTSPD_FULL_SPEED 1U
|
||||
#define HPRT0_PRTSPD_LOW_SPEED 2U
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#define HCCHAR_CTRL 0U
|
||||
#define HCCHAR_ISOC 1U
|
||||
#define HCCHAR_BULK 2U
|
||||
#define HCCHAR_INTR 3U
|
||||
|
||||
#define HC_PID_DATA0 0U
|
||||
#define HC_PID_DATA2 1U
|
||||
#define HC_PID_DATA1 2U
|
||||
#define HC_PID_SETUP 3U
|
||||
|
||||
#define GRXSTS_PKTSTS_IN 2U
|
||||
#define GRXSTS_PKTSTS_IN_XFER_COMP 3U
|
||||
#define GRXSTS_PKTSTS_DATA_TOGGLE_ERR 5U
|
||||
#define GRXSTS_PKTSTS_CH_HALTED 7U
|
||||
|
||||
#define USBx_PCGCCTL *(__IO uint32_t *)((uint32_t)USBx_BASE + USB_OTG_PCGCCTL_BASE)
|
||||
#define USBx_HPRT0 *(__IO uint32_t *)((uint32_t)USBx_BASE + USB_OTG_HOST_PORT_BASE)
|
||||
|
||||
#define USBx_DEVICE ((USB_OTG_DeviceTypeDef *)(USBx_BASE + USB_OTG_DEVICE_BASE))
|
||||
#define USBx_INEP(i) ((USB_OTG_INEndpointTypeDef *)(USBx_BASE + USB_OTG_IN_ENDPOINT_BASE + ((i) * USB_OTG_EP_REG_SIZE)))
|
||||
#define USBx_OUTEP(i) ((USB_OTG_OUTEndpointTypeDef *)(USBx_BASE + USB_OTG_OUT_ENDPOINT_BASE + ((i) * USB_OTG_EP_REG_SIZE)))
|
||||
#define USBx_DFIFO(i) *(__IO uint32_t *)(USBx_BASE + USB_OTG_FIFO_BASE + ((i) * USB_OTG_FIFO_SIZE))
|
||||
|
||||
#define USBx_HOST ((USB_OTG_HostTypeDef *)(USBx_BASE + USB_OTG_HOST_BASE))
|
||||
#define USBx_HC(i) ((USB_OTG_HostChannelTypeDef *)(USBx_BASE + USB_OTG_HOST_CHANNEL_BASE + ((i) * USB_OTG_HOST_CHANNEL_SIZE)))
|
||||
#endif /* defined (USB_OTG_FS) || defined (USB_OTG_HS) */
|
||||
|
||||
#define EP_ADDR_MSK 0xFU
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported macro ------------------------------------------------------------*/
|
||||
/** @defgroup USB_LL_Exported_Macros USB Low Layer Exported Macros
|
||||
* @{
|
||||
*/
|
||||
#if defined (USB_OTG_FS) || defined (USB_OTG_HS)
|
||||
#define USB_MASK_INTERRUPT(__INSTANCE__, __INTERRUPT__) ((__INSTANCE__)->GINTMSK &= ~(__INTERRUPT__))
|
||||
#define USB_UNMASK_INTERRUPT(__INSTANCE__, __INTERRUPT__) ((__INSTANCE__)->GINTMSK |= (__INTERRUPT__))
|
||||
|
||||
#define CLEAR_IN_EP_INTR(__EPNUM__, __INTERRUPT__) (USBx_INEP(__EPNUM__)->DIEPINT = (__INTERRUPT__))
|
||||
#define CLEAR_OUT_EP_INTR(__EPNUM__, __INTERRUPT__) (USBx_OUTEP(__EPNUM__)->DOEPINT = (__INTERRUPT__))
|
||||
#endif /* defined (USB_OTG_FS) || defined (USB_OTG_HS) */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported functions --------------------------------------------------------*/
|
||||
/** @addtogroup USB_LL_Exported_Functions USB Low Layer Exported Functions
|
||||
* @{
|
||||
*/
|
||||
#if defined (USB_OTG_FS) || defined (USB_OTG_HS)
|
||||
HAL_StatusTypeDef USB_CoreInit(USB_OTG_GlobalTypeDef *USBx, USB_OTG_CfgTypeDef cfg);
|
||||
HAL_StatusTypeDef USB_DevInit(USB_OTG_GlobalTypeDef *USBx, USB_OTG_CfgTypeDef cfg);
|
||||
HAL_StatusTypeDef USB_EnableGlobalInt(USB_OTG_GlobalTypeDef *USBx);
|
||||
HAL_StatusTypeDef USB_DisableGlobalInt(USB_OTG_GlobalTypeDef *USBx);
|
||||
HAL_StatusTypeDef USB_SetTurnaroundTime(USB_OTG_GlobalTypeDef *USBx, uint32_t hclk, uint8_t speed);
|
||||
HAL_StatusTypeDef USB_SetCurrentMode(USB_OTG_GlobalTypeDef *USBx, USB_OTG_ModeTypeDef mode);
|
||||
HAL_StatusTypeDef USB_SetDevSpeed(USB_OTG_GlobalTypeDef *USBx, uint8_t speed);
|
||||
HAL_StatusTypeDef USB_FlushRxFifo(USB_OTG_GlobalTypeDef *USBx);
|
||||
HAL_StatusTypeDef USB_FlushTxFifo(USB_OTG_GlobalTypeDef *USBx, uint32_t num);
|
||||
HAL_StatusTypeDef USB_ActivateEndpoint(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep);
|
||||
HAL_StatusTypeDef USB_DeactivateEndpoint(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep);
|
||||
HAL_StatusTypeDef USB_ActivateDedicatedEndpoint(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep);
|
||||
HAL_StatusTypeDef USB_DeactivateDedicatedEndpoint(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep);
|
||||
HAL_StatusTypeDef USB_EPStartXfer(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep, uint8_t dma);
|
||||
HAL_StatusTypeDef USB_EP0StartXfer(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep, uint8_t dma);
|
||||
HAL_StatusTypeDef USB_WritePacket(USB_OTG_GlobalTypeDef *USBx, uint8_t *src, uint8_t ch_ep_num, uint16_t len, uint8_t dma);
|
||||
void *USB_ReadPacket(USB_OTG_GlobalTypeDef *USBx, uint8_t *dest, uint16_t len);
|
||||
HAL_StatusTypeDef USB_EPSetStall(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep);
|
||||
HAL_StatusTypeDef USB_EPClearStall(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep);
|
||||
HAL_StatusTypeDef USB_SetDevAddress(USB_OTG_GlobalTypeDef *USBx, uint8_t address);
|
||||
HAL_StatusTypeDef USB_DevConnect(USB_OTG_GlobalTypeDef *USBx);
|
||||
HAL_StatusTypeDef USB_DevDisconnect(USB_OTG_GlobalTypeDef *USBx);
|
||||
HAL_StatusTypeDef USB_StopDevice(USB_OTG_GlobalTypeDef *USBx);
|
||||
HAL_StatusTypeDef USB_ActivateSetup(USB_OTG_GlobalTypeDef *USBx);
|
||||
HAL_StatusTypeDef USB_EP0_OutStart(USB_OTG_GlobalTypeDef *USBx, uint8_t dma, uint8_t *psetup);
|
||||
uint8_t USB_GetDevSpeed(USB_OTG_GlobalTypeDef *USBx);
|
||||
uint32_t USB_GetMode(USB_OTG_GlobalTypeDef *USBx);
|
||||
uint32_t USB_ReadInterrupts(USB_OTG_GlobalTypeDef *USBx);
|
||||
uint32_t USB_ReadDevAllOutEpInterrupt(USB_OTG_GlobalTypeDef *USBx);
|
||||
uint32_t USB_ReadDevOutEPInterrupt(USB_OTG_GlobalTypeDef *USBx, uint8_t epnum);
|
||||
uint32_t USB_ReadDevAllInEpInterrupt(USB_OTG_GlobalTypeDef *USBx);
|
||||
uint32_t USB_ReadDevInEPInterrupt(USB_OTG_GlobalTypeDef *USBx, uint8_t epnum);
|
||||
void USB_ClearInterrupts(USB_OTG_GlobalTypeDef *USBx, uint32_t interrupt);
|
||||
|
||||
HAL_StatusTypeDef USB_HostInit(USB_OTG_GlobalTypeDef *USBx, USB_OTG_CfgTypeDef cfg);
|
||||
HAL_StatusTypeDef USB_InitFSLSPClkSel(USB_OTG_GlobalTypeDef *USBx, uint8_t freq);
|
||||
HAL_StatusTypeDef USB_ResetPort(USB_OTG_GlobalTypeDef *USBx);
|
||||
HAL_StatusTypeDef USB_DriveVbus(USB_OTG_GlobalTypeDef *USBx, uint8_t state);
|
||||
uint32_t USB_GetHostSpeed(USB_OTG_GlobalTypeDef *USBx);
|
||||
uint32_t USB_GetCurrentFrame(USB_OTG_GlobalTypeDef *USBx);
|
||||
HAL_StatusTypeDef USB_HC_Init(USB_OTG_GlobalTypeDef *USBx,
|
||||
uint8_t ch_num,
|
||||
uint8_t epnum,
|
||||
uint8_t dev_address,
|
||||
uint8_t speed,
|
||||
uint8_t ep_type,
|
||||
uint16_t mps);
|
||||
HAL_StatusTypeDef USB_HC_StartXfer(USB_OTG_GlobalTypeDef *USBx, USB_OTG_HCTypeDef *hc, uint8_t dma);
|
||||
uint32_t USB_HC_ReadInterrupt(USB_OTG_GlobalTypeDef *USBx);
|
||||
HAL_StatusTypeDef USB_HC_Halt(USB_OTG_GlobalTypeDef *USBx, uint8_t hc_num);
|
||||
HAL_StatusTypeDef USB_DoPing(USB_OTG_GlobalTypeDef *USBx, uint8_t ch_num);
|
||||
HAL_StatusTypeDef USB_StopHost(USB_OTG_GlobalTypeDef *USBx);
|
||||
HAL_StatusTypeDef USB_ActivateRemoteWakeup(USB_OTG_GlobalTypeDef *USBx);
|
||||
HAL_StatusTypeDef USB_DeActivateRemoteWakeup(USB_OTG_GlobalTypeDef *USBx);
|
||||
#endif /* defined (USB_OTG_FS) || defined (USB_OTG_HS) */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
#endif /* defined (USB_OTG_FS) || defined (USB_OTG_HS) */
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
|
||||
#endif /* STM32F4xx_LL_USB_H */
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
Loading…
Add table
Add a link
Reference in a new issue