From ffec0e2b5758144cc326b07d49c5acccf2573a5e Mon Sep 17 00:00:00 2001 From: abody Date: Mon, 7 Oct 2019 11:47:37 +0200 Subject: [PATCH] Initialize other pheripherals --- .cproject | 68 +- .mxproject | 10 +- .sw4stm32.4822460615094152264.resolved.cfg | 0 .../Inc/stm32f4xx_hal_pcd.h | 452 ++ .../Inc/stm32f4xx_hal_pcd_ex.h | 91 + .../Inc/stm32f4xx_hal_sd.h | 765 ++ .../Inc/stm32f4xx_hal_sram.h | 232 + .../Inc/stm32f4xx_ll_fsmc.h | 1033 +++ .../Inc/stm32f4xx_ll_sdmmc.h | 1117 +++ .../Inc/stm32f4xx_ll_usb.h | 511 ++ .../Src/stm32f4xx_hal_pcd.c | 2223 ++++++ .../Src/stm32f4xx_hal_pcd_ex.c | 348 + .../Src/stm32f4xx_hal_sd.c | 3315 +++++++++ .../Src/stm32f4xx_hal_sram.c | 912 +++ .../Src/stm32f4xx_ll_fsmc.c | 1009 +++ .../Src/stm32f4xx_ll_sdmmc.c | 1491 ++++ .../Src/stm32f4xx_ll_usb.c | 2032 ++++++ Inc/bsp_driver_sd.h | 92 + Inc/crc.h | 8 +- Inc/dma.h | 8 +- Inc/fatfs.h | 49 + Inc/ffconf.h | 270 + Inc/fsmc.h | 60 + Inc/gpio.h | 8 +- Inc/main.h | 29 +- Inc/sd_diskio.h | 45 + Inc/sdio.h | 58 + Inc/spi.h | 9 +- Inc/stm32_assert.h | 8 +- Inc/stm32f4xx_hal_conf.h | 6 +- Inc/stm32f4xx_it.h | 7 +- Inc/usart.h | 9 +- Inc/usb_otg.h | 58 + Middlewares/Third_Party/FatFs/src/diskio.c | 181 + Middlewares/Third_Party/FatFs/src/diskio.h | 80 + Middlewares/Third_Party/FatFs/src/ff.c | 6140 +++++++++++++++++ Middlewares/Third_Party/FatFs/src/ff.h | 361 + .../Third_Party/FatFs/src/ff_gen_drv.c | 124 + .../Third_Party/FatFs/src/ff_gen_drv.h | 82 + Middlewares/Third_Party/FatFs/src/integer.h | 38 + .../Third_Party/FatFs/src/option/ccsbcs.c | 388 ++ .../Third_Party/FatFs/src/option/syscall.c | 164 + Src/bsp_driver_sd.c | 342 + Src/crc.c | 8 +- Src/dma.c | 46 +- Src/fatfs.c | 56 + Src/fsmc.c | 209 + Src/gpio.c | 36 +- Src/main.c | 8 +- Src/sd_diskio.c | 259 + Src/sdio.c | 121 + Src/spi.c | 93 +- Src/stm32f4xx_it.c | 98 +- Src/usart.c | 105 +- Src/usb_otg.c | 108 + app/application.c | 15 +- app/config.h | 7 +- app/diag.h | 23 +- f407ve_hs_uart (OpenOCD).cfg | 31 + f407ve_hs_uart Debug (1).cfg | 31 + f407ve_hs_uart OpenOCD.cfg | 31 + f407ve_hs_uart.ioc | 642 +- lib/console_handler.c | 12 + lib/crc_handler.c | 11 + lib/fault.c | 203 +- lib/fault.h | 11 + lib/memcpy_dma.c | 10 + lib/usart_handler.c | 13 +- lib/usart_handler.h | 2 +- 69 files changed, 25802 insertions(+), 620 deletions(-) create mode 100644 .sw4stm32.4822460615094152264.resolved.cfg create mode 100644 Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_pcd.h create mode 100644 Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_pcd_ex.h create mode 100644 Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_sd.h create mode 100644 Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_sram.h create mode 100644 Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_fsmc.h create mode 100644 Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_sdmmc.h create mode 100644 Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_usb.h create mode 100644 Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_pcd.c create mode 100644 Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_pcd_ex.c create mode 100644 Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_sd.c create mode 100644 Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_sram.c create mode 100644 Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_fsmc.c create mode 100644 Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_sdmmc.c create mode 100644 Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_usb.c create mode 100644 Inc/bsp_driver_sd.h create mode 100644 Inc/fatfs.h create mode 100644 Inc/ffconf.h create mode 100644 Inc/fsmc.h create mode 100644 Inc/sd_diskio.h create mode 100644 Inc/sdio.h create mode 100644 Inc/usb_otg.h create mode 100644 Middlewares/Third_Party/FatFs/src/diskio.c create mode 100644 Middlewares/Third_Party/FatFs/src/diskio.h create mode 100644 Middlewares/Third_Party/FatFs/src/ff.c create mode 100644 Middlewares/Third_Party/FatFs/src/ff.h create mode 100644 Middlewares/Third_Party/FatFs/src/ff_gen_drv.c create mode 100644 Middlewares/Third_Party/FatFs/src/ff_gen_drv.h create mode 100644 Middlewares/Third_Party/FatFs/src/integer.h create mode 100644 Middlewares/Third_Party/FatFs/src/option/ccsbcs.c create mode 100644 Middlewares/Third_Party/FatFs/src/option/syscall.c create mode 100644 Src/bsp_driver_sd.c create mode 100644 Src/fatfs.c create mode 100644 Src/fsmc.c create mode 100644 Src/sd_diskio.c create mode 100644 Src/sdio.c create mode 100644 Src/usb_otg.c create mode 100644 f407ve_hs_uart (OpenOCD).cfg create mode 100644 f407ve_hs_uart Debug (1).cfg create mode 100644 f407ve_hs_uart OpenOCD.cfg create mode 100644 lib/fault.h diff --git a/.cproject b/.cproject index 435280f..2ddd225 100644 --- a/.cproject +++ b/.cproject @@ -13,34 +13,34 @@ - + - + + + + + + + + + + + + + + + + + + + + + + + + @@ -111,7 +143,7 @@ diff --git a/.mxproject b/.mxproject index 496f559..789bcd6 100644 --- a/.mxproject +++ b/.mxproject @@ -1,14 +1,14 @@ [PreviousGenFiles] HeaderPath=/home/abody/Private/work/private/f407ve_hs_uart/Inc -HeaderFiles=gpio.h;crc.h;dma.h;spi.h;usart.h;stm32f4xx_it.h;stm32_assert.h;stm32f4xx_hal_conf.h;main.h; +HeaderFiles=gpio.h;crc.h;dma.h;spi.h;usart.h;stm32f4xx_it.h;stm32_assert.h;stm32f4xx_hal_conf.h;main.h;fsmc.h;sdio.h;usb_otg.h;ffconf.h;bsp_driver_sd.h;sd_diskio.h;fatfs.h; SourcePath=/home/abody/Private/work/private/f407ve_hs_uart/Src -SourceFiles=gpio.c;crc.c;dma.c;spi.c;usart.c;stm32f4xx_it.c;stm32f4xx_hal_msp.c;main.c; +SourceFiles=gpio.c;crc.c;dma.c;spi.c;usart.c;stm32f4xx_it.c;stm32f4xx_hal_msp.c;main.c;fsmc.c;sdio.c;usb_otg.c;bsp_driver_sd.c;sd_diskio.c;fatfs.c; [PreviousLibFiles] -LibFiles=Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_gpio.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_system.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_rcc.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_crc.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_dma.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_spi.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_tim.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_tim_ex.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_usart.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_rcc.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_rcc_ex.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_flash.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_flash_ex.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_flash_ramfunc.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_gpio.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_gpio_ex.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_dma_ex.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_dma.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_pwr.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_pwr_ex.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_cortex.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal.h;Drivers/STM32F4xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_def.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_exti.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_bus.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_cortex.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_utils.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_exti.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_pwr.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_dmamux.h;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_gpio.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_crc.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_dma.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_spi.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_tim.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_tim_ex.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_usart.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_rcc.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_rcc_ex.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_flash.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_flash_ex.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_flash_ramfunc.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_gpio.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_dma_ex.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_dma.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_pwr.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_pwr_ex.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_cortex.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_exti.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_rcc.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_utils.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_exti.c;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_gpio.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_system.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_rcc.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_crc.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_dma.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_spi.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_tim.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_tim_ex.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_usart.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_rcc.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_rcc_ex.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_flash.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_flash_ex.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_flash_ramfunc.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_gpio.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_gpio_ex.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_dma_ex.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_dma.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_pwr.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_pwr_ex.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_cortex.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal.h;Drivers/STM32F4xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_def.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_exti.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_bus.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_cortex.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_utils.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_exti.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_pwr.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_dmamux.h;Drivers/CMSIS/Device/ST/STM32F4xx/Include/stm32f407xx.h;Drivers/CMSIS/Device/ST/STM32F4xx/Include/stm32f4xx.h;Drivers/CMSIS/Device/ST/STM32F4xx/Include/system_stm32f4xx.h;Drivers/CMSIS/Device/ST/STM32F4xx/Source/Templates/system_stm32f4xx.c;Drivers/CMSIS/Include/cmsis_armcc.h;Drivers/CMSIS/Include/cmsis_armclang.h;Drivers/CMSIS/Include/cmsis_compiler.h;Drivers/CMSIS/Include/cmsis_gcc.h;Drivers/CMSIS/Include/cmsis_iccarm.h;Drivers/CMSIS/Include/cmsis_version.h;Drivers/CMSIS/Include/core_armv8mbl.h;Drivers/CMSIS/Include/core_armv8mml.h;Drivers/CMSIS/Include/core_cm0.h;Drivers/CMSIS/Include/core_cm0plus.h;Drivers/CMSIS/Include/core_cm1.h;Drivers/CMSIS/Include/core_cm23.h;Drivers/CMSIS/Include/core_cm3.h;Drivers/CMSIS/Include/core_cm33.h;Drivers/CMSIS/Include/core_cm4.h;Drivers/CMSIS/Include/core_cm7.h;Drivers/CMSIS/Include/core_sc000.h;Drivers/CMSIS/Include/core_sc300.h;Drivers/CMSIS/Include/mpu_armv7.h;Drivers/CMSIS/Include/mpu_armv8.h;Drivers/CMSIS/Include/tz_context.h; +LibFiles=Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_gpio.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_system.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_rcc.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_crc.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_dma.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_fsmc.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_sram.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_sdmmc.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_sd.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_spi.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_tim.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_tim_ex.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_usart.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_pcd.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_pcd_ex.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_usb.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_rcc.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_rcc_ex.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_flash.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_flash_ex.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_flash_ramfunc.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_gpio.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_gpio_ex.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_dma_ex.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_dma.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_pwr.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_pwr_ex.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_cortex.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal.h;Drivers/STM32F4xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_def.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_exti.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_bus.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_cortex.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_utils.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_exti.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_pwr.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_dmamux.h;Middlewares/Third_Party/FatFs/src/diskio.h;Middlewares/Third_Party/FatFs/src/ff.h;Middlewares/Third_Party/FatFs/src/ff_gen_drv.h;Middlewares/Third_Party/FatFs/src/integer.h;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_gpio.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_crc.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_dma.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_fsmc.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_sram.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_sdmmc.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_sd.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_spi.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_tim.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_tim_ex.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_usart.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_pcd.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_pcd_ex.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_usb.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_rcc.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_rcc_ex.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_flash.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_flash_ex.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_flash_ramfunc.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_gpio.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_dma_ex.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_dma.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_pwr.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_pwr_ex.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_cortex.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_exti.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_rcc.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_utils.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_exti.c;Middlewares/Third_Party/FatFs/src/diskio.c;Middlewares/Third_Party/FatFs/src/ff.c;Middlewares/Third_Party/FatFs/src/ff_gen_drv.c;Middlewares/Third_Party/FatFs/src/option/syscall.c;Middlewares/Third_Party/FatFs/src/option/ccsbcs.c;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_gpio.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_system.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_rcc.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_crc.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_dma.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_fsmc.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_sram.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_sdmmc.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_sd.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_spi.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_tim.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_tim_ex.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_usart.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_pcd.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_pcd_ex.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_usb.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_rcc.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_rcc_ex.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_flash.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_flash_ex.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_flash_ramfunc.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_gpio.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_gpio_ex.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_dma_ex.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_dma.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_pwr.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_pwr_ex.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_cortex.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal.h;Drivers/STM32F4xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_def.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_exti.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_bus.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_cortex.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_utils.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_exti.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_pwr.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_dmamux.h;Middlewares/Third_Party/FatFs/src/diskio.h;Middlewares/Third_Party/FatFs/src/ff.h;Middlewares/Third_Party/FatFs/src/ff_gen_drv.h;Middlewares/Third_Party/FatFs/src/integer.h;Drivers/CMSIS/Device/ST/STM32F4xx/Include/stm32f407xx.h;Drivers/CMSIS/Device/ST/STM32F4xx/Include/stm32f4xx.h;Drivers/CMSIS/Device/ST/STM32F4xx/Include/system_stm32f4xx.h;Drivers/CMSIS/Device/ST/STM32F4xx/Source/Templates/system_stm32f4xx.c;Drivers/CMSIS/Include/cmsis_armcc.h;Drivers/CMSIS/Include/cmsis_armclang.h;Drivers/CMSIS/Include/cmsis_compiler.h;Drivers/CMSIS/Include/cmsis_gcc.h;Drivers/CMSIS/Include/cmsis_iccarm.h;Drivers/CMSIS/Include/cmsis_version.h;Drivers/CMSIS/Include/core_armv8mbl.h;Drivers/CMSIS/Include/core_armv8mml.h;Drivers/CMSIS/Include/core_cm0.h;Drivers/CMSIS/Include/core_cm0plus.h;Drivers/CMSIS/Include/core_cm1.h;Drivers/CMSIS/Include/core_cm23.h;Drivers/CMSIS/Include/core_cm3.h;Drivers/CMSIS/Include/core_cm33.h;Drivers/CMSIS/Include/core_cm4.h;Drivers/CMSIS/Include/core_cm7.h;Drivers/CMSIS/Include/core_sc000.h;Drivers/CMSIS/Include/core_sc300.h;Drivers/CMSIS/Include/mpu_armv7.h;Drivers/CMSIS/Include/mpu_armv8.h;Drivers/CMSIS/Include/tz_context.h; [PreviousUsedCubeIDEFiles] -SourceFiles=Src/main.c;Src/gpio.c;Src/crc.c;Src/dma.c;Src/spi.c;Src/usart.c;Src/stm32f4xx_it.c;Src/stm32f4xx_hal_msp.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_gpio.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_crc.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_dma.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_spi.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_tim.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_tim_ex.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_usart.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_rcc.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_rcc_ex.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_flash.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_flash_ex.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_flash_ramfunc.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_gpio.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_dma_ex.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_dma.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_pwr.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_pwr_ex.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_cortex.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_exti.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_rcc.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_utils.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_exti.c;Src/system_stm32f4xx.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_gpio.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_crc.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_dma.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_spi.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_tim.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_tim_ex.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_usart.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_rcc.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_rcc_ex.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_flash.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_flash_ex.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_flash_ramfunc.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_gpio.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_dma_ex.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_dma.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_pwr.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_pwr_ex.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_cortex.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_exti.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_rcc.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_utils.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_exti.c;Src/system_stm32f4xx.c;Drivers/CMSIS/Device/ST/STM32F4xx/Source/Templates/system_stm32f4xx.c;null; -HeaderPath=Drivers/STM32F4xx_HAL_Driver/Inc;Drivers/STM32F4xx_HAL_Driver/Inc/Legacy;Drivers/CMSIS/Device/ST/STM32F4xx/Include;Drivers/CMSIS/Include;Inc; +SourceFiles=Src/main.c;Src/gpio.c;Src/crc.c;Src/dma.c;Src/bsp_driver_sd.c;Src/sd_diskio.c;Src/fatfs.c;Src/fsmc.c;Src/sdio.c;Src/spi.c;Src/usart.c;Src/usb_otg.c;Src/stm32f4xx_it.c;Src/stm32f4xx_hal_msp.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_gpio.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_crc.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_dma.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_fsmc.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_sram.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_sdmmc.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_sd.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_spi.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_tim.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_tim_ex.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_usart.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_pcd.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_pcd_ex.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_usb.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_rcc.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_rcc_ex.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_flash.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_flash_ex.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_flash_ramfunc.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_gpio.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_dma_ex.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_dma.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_pwr.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_pwr_ex.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_cortex.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_exti.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_rcc.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_utils.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_exti.c;Middlewares/Third_Party/FatFs/src/diskio.c;Middlewares/Third_Party/FatFs/src/ff.c;Middlewares/Third_Party/FatFs/src/ff_gen_drv.c;Middlewares/Third_Party/FatFs/src/option/syscall.c;Middlewares/Third_Party/FatFs/src/option/ccsbcs.c;Src/system_stm32f4xx.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_gpio.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_crc.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_dma.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_fsmc.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_sram.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_sdmmc.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_sd.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_spi.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_tim.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_tim_ex.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_usart.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_pcd.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_pcd_ex.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_usb.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_rcc.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_rcc_ex.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_flash.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_flash_ex.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_flash_ramfunc.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_gpio.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_dma_ex.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_dma.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_pwr.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_pwr_ex.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_cortex.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_exti.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_rcc.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_utils.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_exti.c;Middlewares/Third_Party/FatFs/src/diskio.c;Middlewares/Third_Party/FatFs/src/ff.c;Middlewares/Third_Party/FatFs/src/ff_gen_drv.c;Middlewares/Third_Party/FatFs/src/option/syscall.c;Middlewares/Third_Party/FatFs/src/option/ccsbcs.c;Src/system_stm32f4xx.c;Drivers/CMSIS/Device/ST/STM32F4xx/Source/Templates/system_stm32f4xx.c;null;Middlewares/Third_Party/FatFs/src/diskio.c;Middlewares/Third_Party/FatFs/src/ff.c;Middlewares/Third_Party/FatFs/src/ff_gen_drv.c;Middlewares/Third_Party/FatFs/src/option/syscall.c;Middlewares/Third_Party/FatFs/src/option/ccsbcs.c; +HeaderPath=Drivers/STM32F4xx_HAL_Driver/Inc;Drivers/STM32F4xx_HAL_Driver/Inc/Legacy;Middlewares/Third_Party/FatFs/src;Drivers/CMSIS/Device/ST/STM32F4xx/Include;Drivers/CMSIS/Include;Inc; CDefines=USE_FULL_LL_DRIVER;USE_HAL_DRIVER;STM32F407xx;USE_FULL_LL_DRIVER;USE_HAL_DRIVER;USE_HAL_DRIVER;STM32F407xx; diff --git a/.sw4stm32.4822460615094152264.resolved.cfg b/.sw4stm32.4822460615094152264.resolved.cfg new file mode 100644 index 0000000..e69de29 diff --git a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_pcd.h b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_pcd.h new file mode 100644 index 0000000..04ba442 --- /dev/null +++ b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_pcd.h @@ -0,0 +1,452 @@ +/** + ****************************************************************************** + * @file stm32f4xx_hal_pcd.h + * @author MCD Application Team + * @brief Header file of PCD HAL module. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32F4xx_HAL_PCD_H +#define STM32F4xx_HAL_PCD_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f4xx_ll_usb.h" + +#if defined (USB_OTG_FS) || defined (USB_OTG_HS) + +/** @addtogroup STM32F4xx_HAL_Driver + * @{ + */ + +/** @addtogroup PCD + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup PCD_Exported_Types PCD Exported Types + * @{ + */ + +/** + * @brief PCD State structure definition + */ +typedef enum +{ + HAL_PCD_STATE_RESET = 0x00, + HAL_PCD_STATE_READY = 0x01, + HAL_PCD_STATE_ERROR = 0x02, + HAL_PCD_STATE_BUSY = 0x03, + HAL_PCD_STATE_TIMEOUT = 0x04 +} PCD_StateTypeDef; + +/* Device LPM suspend state */ +typedef enum +{ + LPM_L0 = 0x00, /* on */ + LPM_L1 = 0x01, /* LPM L1 sleep */ + LPM_L2 = 0x02, /* suspend */ + LPM_L3 = 0x03, /* off */ +} PCD_LPM_StateTypeDef; + +typedef enum +{ + PCD_LPM_L0_ACTIVE = 0x00, /* on */ + PCD_LPM_L1_ACTIVE = 0x01, /* LPM L1 sleep */ +} PCD_LPM_MsgTypeDef; + +typedef enum +{ + PCD_BCD_ERROR = 0xFF, + PCD_BCD_CONTACT_DETECTION = 0xFE, + PCD_BCD_STD_DOWNSTREAM_PORT = 0xFD, + PCD_BCD_CHARGING_DOWNSTREAM_PORT = 0xFC, + PCD_BCD_DEDICATED_CHARGING_PORT = 0xFB, + PCD_BCD_DISCOVERY_COMPLETED = 0x00, + +} PCD_BCD_MsgTypeDef; + +#if defined (USB_OTG_FS) || defined (USB_OTG_HS) +typedef USB_OTG_GlobalTypeDef PCD_TypeDef; +typedef USB_OTG_CfgTypeDef PCD_InitTypeDef; +typedef USB_OTG_EPTypeDef PCD_EPTypeDef; +#endif /* defined (USB_OTG_FS) || defined (USB_OTG_HS) */ + +/** + * @brief PCD Handle Structure definition + */ +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) +typedef struct __PCD_HandleTypeDef +#else +typedef struct +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ +{ + PCD_TypeDef *Instance; /*!< Register base address */ + PCD_InitTypeDef Init; /*!< PCD required parameters */ + __IO uint8_t USB_Address; /*!< USB Address */ + PCD_EPTypeDef IN_ep[16]; /*!< IN endpoint parameters */ + PCD_EPTypeDef OUT_ep[16]; /*!< OUT endpoint parameters */ + HAL_LockTypeDef Lock; /*!< PCD peripheral status */ + __IO PCD_StateTypeDef State; /*!< PCD communication state */ + __IO uint32_t ErrorCode; /*!< PCD Error code */ + uint32_t Setup[12]; /*!< Setup packet buffer */ + PCD_LPM_StateTypeDef LPM_State; /*!< LPM State */ + uint32_t BESL; + + + uint32_t lpm_active; /*!< Enable or disable the Link Power Management . + This parameter can be set to ENABLE or DISABLE */ + + uint32_t battery_charging_active; /*!< Enable or disable Battery charging. + This parameter can be set to ENABLE or DISABLE */ + void *pData; /*!< Pointer to upper stack Handler */ + +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) + void (* SOFCallback)(struct __PCD_HandleTypeDef *hpcd); /*!< USB OTG PCD SOF callback */ + void (* SetupStageCallback)(struct __PCD_HandleTypeDef *hpcd); /*!< USB OTG PCD Setup Stage callback */ + void (* ResetCallback)(struct __PCD_HandleTypeDef *hpcd); /*!< USB OTG PCD Reset callback */ + void (* SuspendCallback)(struct __PCD_HandleTypeDef *hpcd); /*!< USB OTG PCD Suspend callback */ + void (* ResumeCallback)(struct __PCD_HandleTypeDef *hpcd); /*!< USB OTG PCD Resume callback */ + void (* ConnectCallback)(struct __PCD_HandleTypeDef *hpcd); /*!< USB OTG PCD Connect callback */ + void (* DisconnectCallback)(struct __PCD_HandleTypeDef *hpcd); /*!< USB OTG PCD Disconnect callback */ + + void (* DataOutStageCallback)(struct __PCD_HandleTypeDef *hpcd, uint8_t epnum); /*!< USB OTG PCD Data OUT Stage callback */ + void (* DataInStageCallback)(struct __PCD_HandleTypeDef *hpcd, uint8_t epnum); /*!< USB OTG PCD Data IN Stage callback */ + void (* ISOOUTIncompleteCallback)(struct __PCD_HandleTypeDef *hpcd, uint8_t epnum); /*!< USB OTG PCD ISO OUT Incomplete callback */ + void (* ISOINIncompleteCallback)(struct __PCD_HandleTypeDef *hpcd, uint8_t epnum); /*!< USB OTG PCD ISO IN Incomplete callback */ + void (* BCDCallback)(struct __PCD_HandleTypeDef *hpcd, PCD_BCD_MsgTypeDef msg); /*!< USB OTG PCD BCD callback */ + void (* LPMCallback)(struct __PCD_HandleTypeDef *hpcd, PCD_LPM_MsgTypeDef msg); /*!< USB OTG PCD LPM callback */ + + void (* MspInitCallback)(struct __PCD_HandleTypeDef *hpcd); /*!< USB OTG PCD Msp Init callback */ + void (* MspDeInitCallback)(struct __PCD_HandleTypeDef *hpcd); /*!< USB OTG PCD Msp DeInit callback */ +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ +} PCD_HandleTypeDef; + +/** + * @} + */ + +/* Include PCD HAL Extended module */ +#include "stm32f4xx_hal_pcd_ex.h" + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup PCD_Exported_Constants PCD Exported Constants + * @{ + */ + +/** @defgroup PCD_Speed PCD Speed + * @{ + */ +#define PCD_SPEED_HIGH USBD_HS_SPEED +#define PCD_SPEED_HIGH_IN_FULL USBD_HSINFS_SPEED +#define PCD_SPEED_FULL USBD_FS_SPEED +/** + * @} + */ + +/** @defgroup PCD_PHY_Module PCD PHY Module + * @{ + */ +#define PCD_PHY_ULPI 1U +#define PCD_PHY_EMBEDDED 2U +#define PCD_PHY_UTMI 3U +/** + * @} + */ + +/** @defgroup PCD_Error_Code_definition PCD Error Code definition + * @brief PCD Error Code definition + * @{ + */ +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) +#define HAL_PCD_ERROR_INVALID_CALLBACK (0x00000010U) /*!< Invalid Callback error */ +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/** + * @} + */ + +/* Exported macros -----------------------------------------------------------*/ +/** @defgroup PCD_Exported_Macros PCD Exported Macros + * @brief macros to handle interrupts and specific clock configurations + * @{ + */ +#if defined (USB_OTG_FS) || defined (USB_OTG_HS) +#define __HAL_PCD_ENABLE(__HANDLE__) (void)USB_EnableGlobalInt ((__HANDLE__)->Instance) +#define __HAL_PCD_DISABLE(__HANDLE__) (void)USB_DisableGlobalInt ((__HANDLE__)->Instance) + +#define __HAL_PCD_GET_FLAG(__HANDLE__, __INTERRUPT__) ((USB_ReadInterrupts((__HANDLE__)->Instance) & (__INTERRUPT__)) == (__INTERRUPT__)) +#define __HAL_PCD_CLEAR_FLAG(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->GINTSTS) &= (__INTERRUPT__)) +#define __HAL_PCD_IS_INVALID_INTERRUPT(__HANDLE__) (USB_ReadInterrupts((__HANDLE__)->Instance) == 0U) + + +#define __HAL_PCD_UNGATE_PHYCLOCK(__HANDLE__) *(__IO uint32_t *)((uint32_t)((__HANDLE__)->Instance) + USB_OTG_PCGCCTL_BASE) &= \ + ~(USB_OTG_PCGCCTL_STOPCLK) + +#define __HAL_PCD_GATE_PHYCLOCK(__HANDLE__) *(__IO uint32_t *)((uint32_t)((__HANDLE__)->Instance) + USB_OTG_PCGCCTL_BASE) |= USB_OTG_PCGCCTL_STOPCLK + +#define __HAL_PCD_IS_PHY_SUSPENDED(__HANDLE__) ((*(__IO uint32_t *)((uint32_t)((__HANDLE__)->Instance) + USB_OTG_PCGCCTL_BASE)) & 0x10U) + +#define __HAL_USB_OTG_HS_WAKEUP_EXTI_ENABLE_IT() EXTI->IMR |= (USB_OTG_HS_WAKEUP_EXTI_LINE) +#define __HAL_USB_OTG_HS_WAKEUP_EXTI_DISABLE_IT() EXTI->IMR &= ~(USB_OTG_HS_WAKEUP_EXTI_LINE) +#define __HAL_USB_OTG_HS_WAKEUP_EXTI_GET_FLAG() EXTI->PR & (USB_OTG_HS_WAKEUP_EXTI_LINE) +#define __HAL_USB_OTG_HS_WAKEUP_EXTI_CLEAR_FLAG() EXTI->PR = (USB_OTG_HS_WAKEUP_EXTI_LINE) + +#define __HAL_USB_OTG_HS_WAKEUP_EXTI_ENABLE_RISING_EDGE() \ + do { \ + EXTI->FTSR &= ~(USB_OTG_HS_WAKEUP_EXTI_LINE); \ + EXTI->RTSR |= USB_OTG_HS_WAKEUP_EXTI_LINE; \ + } while(0U) +#define __HAL_USB_OTG_FS_WAKEUP_EXTI_ENABLE_IT() EXTI->IMR |= USB_OTG_FS_WAKEUP_EXTI_LINE +#define __HAL_USB_OTG_FS_WAKEUP_EXTI_DISABLE_IT() EXTI->IMR &= ~(USB_OTG_FS_WAKEUP_EXTI_LINE) +#define __HAL_USB_OTG_FS_WAKEUP_EXTI_GET_FLAG() EXTI->PR & (USB_OTG_FS_WAKEUP_EXTI_LINE) +#define __HAL_USB_OTG_FS_WAKEUP_EXTI_CLEAR_FLAG() EXTI->PR = USB_OTG_FS_WAKEUP_EXTI_LINE + +#define __HAL_USB_OTG_FS_WAKEUP_EXTI_ENABLE_RISING_EDGE() \ + do { \ + EXTI->FTSR &= ~(USB_OTG_FS_WAKEUP_EXTI_LINE); \ + EXTI->RTSR |= USB_OTG_FS_WAKEUP_EXTI_LINE; \ + } while(0U) +#endif /* defined (USB_OTG_FS) || defined (USB_OTG_HS) */ + + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup PCD_Exported_Functions PCD Exported Functions + * @{ + */ + +/* Initialization/de-initialization functions ********************************/ +/** @addtogroup PCD_Exported_Functions_Group1 Initialization and de-initialization functions + * @{ + */ +HAL_StatusTypeDef HAL_PCD_Init(PCD_HandleTypeDef *hpcd); +HAL_StatusTypeDef HAL_PCD_DeInit(PCD_HandleTypeDef *hpcd); +void HAL_PCD_MspInit(PCD_HandleTypeDef *hpcd); +void HAL_PCD_MspDeInit(PCD_HandleTypeDef *hpcd); + +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) +/** @defgroup HAL_PCD_Callback_ID_enumeration_definition HAL USB OTG PCD Callback ID enumeration definition + * @brief HAL USB OTG PCD Callback ID enumeration definition + * @{ + */ +typedef enum +{ + HAL_PCD_SOF_CB_ID = 0x01, /*!< USB PCD SOF callback ID */ + HAL_PCD_SETUPSTAGE_CB_ID = 0x02, /*!< USB PCD Setup Stage callback ID */ + HAL_PCD_RESET_CB_ID = 0x03, /*!< USB PCD Reset callback ID */ + HAL_PCD_SUSPEND_CB_ID = 0x04, /*!< USB PCD Suspend callback ID */ + HAL_PCD_RESUME_CB_ID = 0x05, /*!< USB PCD Resume callback ID */ + HAL_PCD_CONNECT_CB_ID = 0x06, /*!< USB PCD Connect callback ID */ + HAL_PCD_DISCONNECT_CB_ID = 0x07, /*!< USB PCD Disconnect callback ID */ + + HAL_PCD_MSPINIT_CB_ID = 0x08, /*!< USB PCD MspInit callback ID */ + HAL_PCD_MSPDEINIT_CB_ID = 0x09 /*!< USB PCD MspDeInit callback ID */ + +} HAL_PCD_CallbackIDTypeDef; +/** + * @} + */ + +/** @defgroup HAL_PCD_Callback_pointer_definition HAL USB OTG PCD Callback pointer definition + * @brief HAL USB OTG PCD Callback pointer definition + * @{ + */ + +typedef void (*pPCD_CallbackTypeDef)(PCD_HandleTypeDef *hpcd); /*!< pointer to a common USB OTG PCD callback function */ +typedef void (*pPCD_DataOutStageCallbackTypeDef)(PCD_HandleTypeDef *hpcd, uint8_t epnum); /*!< pointer to USB OTG PCD Data OUT Stage callback */ +typedef void (*pPCD_DataInStageCallbackTypeDef)(PCD_HandleTypeDef *hpcd, uint8_t epnum); /*!< pointer to USB OTG PCD Data IN Stage callback */ +typedef void (*pPCD_IsoOutIncpltCallbackTypeDef)(PCD_HandleTypeDef *hpcd, uint8_t epnum); /*!< pointer to USB OTG PCD ISO OUT Incomplete callback */ +typedef void (*pPCD_IsoInIncpltCallbackTypeDef)(PCD_HandleTypeDef *hpcd, uint8_t epnum); /*!< pointer to USB OTG PCD ISO IN Incomplete callback */ +typedef void (*pPCD_LpmCallbackTypeDef)(PCD_HandleTypeDef *hpcd, PCD_LPM_MsgTypeDef msg); /*!< pointer to USB OTG PCD LPM callback */ +typedef void (*pPCD_BcdCallbackTypeDef)(PCD_HandleTypeDef *hpcd, PCD_BCD_MsgTypeDef msg); /*!< pointer to USB OTG PCD BCD callback */ + +/** + * @} + */ + +HAL_StatusTypeDef HAL_PCD_RegisterCallback(PCD_HandleTypeDef *hpcd, HAL_PCD_CallbackIDTypeDef CallbackID, pPCD_CallbackTypeDef pCallback); +HAL_StatusTypeDef HAL_PCD_UnRegisterCallback(PCD_HandleTypeDef *hpcd, HAL_PCD_CallbackIDTypeDef CallbackID); + +HAL_StatusTypeDef HAL_PCD_RegisterDataOutStageCallback(PCD_HandleTypeDef *hpcd, pPCD_DataOutStageCallbackTypeDef pCallback); +HAL_StatusTypeDef HAL_PCD_UnRegisterDataOutStageCallback(PCD_HandleTypeDef *hpcd); + +HAL_StatusTypeDef HAL_PCD_RegisterDataInStageCallback(PCD_HandleTypeDef *hpcd, pPCD_DataInStageCallbackTypeDef pCallback); +HAL_StatusTypeDef HAL_PCD_UnRegisterDataInStageCallback(PCD_HandleTypeDef *hpcd); + +HAL_StatusTypeDef HAL_PCD_RegisterIsoOutIncpltCallback(PCD_HandleTypeDef *hpcd, pPCD_IsoOutIncpltCallbackTypeDef pCallback); +HAL_StatusTypeDef HAL_PCD_UnRegisterIsoOutIncpltCallback(PCD_HandleTypeDef *hpcd); + +HAL_StatusTypeDef HAL_PCD_RegisterIsoInIncpltCallback(PCD_HandleTypeDef *hpcd, pPCD_IsoInIncpltCallbackTypeDef pCallback); +HAL_StatusTypeDef HAL_PCD_UnRegisterIsoInIncpltCallback(PCD_HandleTypeDef *hpcd); + +HAL_StatusTypeDef HAL_PCD_RegisterBcdCallback(PCD_HandleTypeDef *hpcd, pPCD_BcdCallbackTypeDef pCallback); +HAL_StatusTypeDef HAL_PCD_UnRegisterBcdCallback(PCD_HandleTypeDef *hpcd); + +HAL_StatusTypeDef HAL_PCD_RegisterLpmCallback(PCD_HandleTypeDef *hpcd, pPCD_LpmCallbackTypeDef pCallback); +HAL_StatusTypeDef HAL_PCD_UnRegisterLpmCallback(PCD_HandleTypeDef *hpcd); +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ +/** + * @} + */ + +/* I/O operation functions ***************************************************/ +/* Non-Blocking mode: Interrupt */ +/** @addtogroup PCD_Exported_Functions_Group2 Input and Output operation functions + * @{ + */ +HAL_StatusTypeDef HAL_PCD_Start(PCD_HandleTypeDef *hpcd); +HAL_StatusTypeDef HAL_PCD_Stop(PCD_HandleTypeDef *hpcd); +void HAL_PCD_IRQHandler(PCD_HandleTypeDef *hpcd); + +void HAL_PCD_SOFCallback(PCD_HandleTypeDef *hpcd); +void HAL_PCD_SetupStageCallback(PCD_HandleTypeDef *hpcd); +void HAL_PCD_ResetCallback(PCD_HandleTypeDef *hpcd); +void HAL_PCD_SuspendCallback(PCD_HandleTypeDef *hpcd); +void HAL_PCD_ResumeCallback(PCD_HandleTypeDef *hpcd); +void HAL_PCD_ConnectCallback(PCD_HandleTypeDef *hpcd); +void HAL_PCD_DisconnectCallback(PCD_HandleTypeDef *hpcd); + +void HAL_PCD_DataOutStageCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum); +void HAL_PCD_DataInStageCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum); +void HAL_PCD_ISOOUTIncompleteCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum); +void HAL_PCD_ISOINIncompleteCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum); +/** + * @} + */ + +/* Peripheral Control functions **********************************************/ +/** @addtogroup PCD_Exported_Functions_Group3 Peripheral Control functions + * @{ + */ +HAL_StatusTypeDef HAL_PCD_DevConnect(PCD_HandleTypeDef *hpcd); +HAL_StatusTypeDef HAL_PCD_DevDisconnect(PCD_HandleTypeDef *hpcd); +HAL_StatusTypeDef HAL_PCD_SetAddress(PCD_HandleTypeDef *hpcd, uint8_t address); +HAL_StatusTypeDef HAL_PCD_EP_Open(PCD_HandleTypeDef *hpcd, uint8_t ep_addr, uint16_t ep_mps, uint8_t ep_type); +HAL_StatusTypeDef HAL_PCD_EP_Close(PCD_HandleTypeDef *hpcd, uint8_t ep_addr); +HAL_StatusTypeDef HAL_PCD_EP_Receive(PCD_HandleTypeDef *hpcd, uint8_t ep_addr, uint8_t *pBuf, uint32_t len); +HAL_StatusTypeDef HAL_PCD_EP_Transmit(PCD_HandleTypeDef *hpcd, uint8_t ep_addr, uint8_t *pBuf, uint32_t len); +uint32_t HAL_PCD_EP_GetRxCount(PCD_HandleTypeDef *hpcd, uint8_t ep_addr); +HAL_StatusTypeDef HAL_PCD_EP_SetStall(PCD_HandleTypeDef *hpcd, uint8_t ep_addr); +HAL_StatusTypeDef HAL_PCD_EP_ClrStall(PCD_HandleTypeDef *hpcd, uint8_t ep_addr); +HAL_StatusTypeDef HAL_PCD_EP_Flush(PCD_HandleTypeDef *hpcd, uint8_t ep_addr); +HAL_StatusTypeDef HAL_PCD_ActivateRemoteWakeup(PCD_HandleTypeDef *hpcd); +HAL_StatusTypeDef HAL_PCD_DeActivateRemoteWakeup(PCD_HandleTypeDef *hpcd); +/** + * @} + */ + +/* Peripheral State functions ************************************************/ +/** @addtogroup PCD_Exported_Functions_Group4 Peripheral State functions + * @{ + */ +PCD_StateTypeDef HAL_PCD_GetState(PCD_HandleTypeDef *hpcd); +/** + * @} + */ + +/** + * @} + */ + +/* Private constants ---------------------------------------------------------*/ +/** @defgroup PCD_Private_Constants PCD Private Constants + * @{ + */ +/** @defgroup USB_EXTI_Line_Interrupt USB EXTI line interrupt + * @{ + */ +#if defined (USB_OTG_FS) || defined (USB_OTG_HS) +#define USB_OTG_FS_WAKEUP_EXTI_RISING_EDGE 0x08U +#define USB_OTG_FS_WAKEUP_EXTI_FALLING_EDGE 0x0CU +#define USB_OTG_FS_WAKEUP_EXTI_RISING_FALLING_EDGE 0x10U + +#define USB_OTG_HS_WAKEUP_EXTI_RISING_EDGE 0x08U +#define USB_OTG_HS_WAKEUP_EXTI_FALLING_EDGE 0x0CU +#define USB_OTG_HS_WAKEUP_EXTI_RISING_FALLING_EDGE 0x10U + +#define USB_OTG_FS_WAKEUP_EXTI_LINE (0x1U << 18) /*!< USB FS EXTI Line WakeUp Interrupt */ +#define USB_OTG_HS_WAKEUP_EXTI_LINE (0x1U << 20) /*!< USB HS EXTI Line WakeUp Interrupt */ +#endif /* defined (USB_OTG_FS) || defined (USB_OTG_HS) */ + + +/** + * @} + */ +/** + * @} + */ + +#if defined (USB_OTG_FS) || defined (USB_OTG_HS) +#ifndef USB_OTG_DOEPINT_OTEPSPR +#define USB_OTG_DOEPINT_OTEPSPR (0x1UL << 5) /*!< Status Phase Received interrupt */ +#endif + +#ifndef USB_OTG_DOEPMSK_OTEPSPRM +#define USB_OTG_DOEPMSK_OTEPSPRM (0x1UL << 5) /*!< Setup Packet Received interrupt mask */ +#endif + +#ifndef USB_OTG_DOEPINT_NAK +#define USB_OTG_DOEPINT_NAK (0x1UL << 13) /*!< NAK interrupt */ +#endif + +#ifndef USB_OTG_DOEPMSK_NAKM +#define USB_OTG_DOEPMSK_NAKM (0x1UL << 13) /*!< OUT Packet NAK interrupt mask */ +#endif + +#ifndef USB_OTG_DOEPINT_STPKTRX +#define USB_OTG_DOEPINT_STPKTRX (0x1UL << 15) /*!< Setup Packet Received interrupt */ +#endif + +#ifndef USB_OTG_DOEPMSK_NYETM +#define USB_OTG_DOEPMSK_NYETM (0x1UL << 14) /*!< Setup Packet Received interrupt mask */ +#endif +#endif /* defined (USB_OTG_FS) || defined (USB_OTG_HS) */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup PCD_Private_Macros PCD Private Macros + * @{ + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ +#endif /* defined (USB_OTG_FS) || defined (USB_OTG_HS) */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32F4xx_HAL_PCD_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_pcd_ex.h b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_pcd_ex.h new file mode 100644 index 0000000..3824243 --- /dev/null +++ b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_pcd_ex.h @@ -0,0 +1,91 @@ +/** + ****************************************************************************** + * @file stm32f4xx_hal_pcd_ex.h + * @author MCD Application Team + * @brief Header file of PCD HAL Extension module. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32F4xx_HAL_PCD_EX_H +#define STM32F4xx_HAL_PCD_EX_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f4xx_hal_def.h" + +#if defined (USB_OTG_FS) || defined (USB_OTG_HS) +/** @addtogroup STM32F4xx_HAL_Driver + * @{ + */ + +/** @addtogroup PCDEx + * @{ + */ +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ +/* Exported macros -----------------------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup PCDEx_Exported_Functions PCDEx Exported Functions + * @{ + */ +/** @addtogroup PCDEx_Exported_Functions_Group1 Peripheral Control functions + * @{ + */ + +#if defined (USB_OTG_FS) || defined (USB_OTG_HS) +HAL_StatusTypeDef HAL_PCDEx_SetTxFiFo(PCD_HandleTypeDef *hpcd, uint8_t fifo, uint16_t size); +HAL_StatusTypeDef HAL_PCDEx_SetRxFiFo(PCD_HandleTypeDef *hpcd, uint16_t size); +#endif /* defined (USB_OTG_FS) || defined (USB_OTG_HS) */ + +#if defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx) +HAL_StatusTypeDef HAL_PCDEx_ActivateLPM(PCD_HandleTypeDef *hpcd); +HAL_StatusTypeDef HAL_PCDEx_DeActivateLPM(PCD_HandleTypeDef *hpcd); +#endif /* defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx) */ +#if defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx) +HAL_StatusTypeDef HAL_PCDEx_ActivateBCD(PCD_HandleTypeDef *hpcd); +HAL_StatusTypeDef HAL_PCDEx_DeActivateBCD(PCD_HandleTypeDef *hpcd); +void HAL_PCDEx_BCD_VBUSDetect(PCD_HandleTypeDef *hpcd); +#endif /* defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx) */ +void HAL_PCDEx_LPM_Callback(PCD_HandleTypeDef *hpcd, PCD_LPM_MsgTypeDef msg); +void HAL_PCDEx_BCD_Callback(PCD_HandleTypeDef *hpcd, PCD_BCD_MsgTypeDef msg); + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ +#endif /* defined (USB_OTG_FS) || defined (USB_OTG_HS) */ + +#ifdef __cplusplus +} +#endif + + +#endif /* STM32F4xx_HAL_PCD_EX_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_sd.h b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_sd.h new file mode 100644 index 0000000..4f85c85 --- /dev/null +++ b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_sd.h @@ -0,0 +1,765 @@ +/** + ****************************************************************************** + * @file stm32f4xx_hal_sd.h + * @author MCD Application Team + * @brief Header file of SD HAL module. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2017 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F4xx_HAL_SD_H +#define __STM32F4xx_HAL_SD_H + +#ifdef __cplusplus + extern "C" { +#endif + +#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) || \ + defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || \ + defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F446xx) || \ + defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || \ + defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx) + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f4xx_ll_sdmmc.h" + +/** @addtogroup STM32F4xx_HAL_Driver + * @{ + */ + +/** @defgroup SD SD + * @brief SD HAL module driver + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup SD_Exported_Types SD Exported Types + * @{ + */ + +/** @defgroup SD_Exported_Types_Group1 SD State enumeration structure + * @{ + */ +typedef enum +{ + HAL_SD_STATE_RESET = 0x00000000U, /*!< SD not yet initialized or disabled */ + HAL_SD_STATE_READY = 0x00000001U, /*!< SD initialized and ready for use */ + HAL_SD_STATE_TIMEOUT = 0x00000002U, /*!< SD Timeout state */ + HAL_SD_STATE_BUSY = 0x00000003U, /*!< SD process ongoing */ + HAL_SD_STATE_PROGRAMMING = 0x00000004U, /*!< SD Programming State */ + HAL_SD_STATE_RECEIVING = 0x00000005U, /*!< SD Receinving State */ + HAL_SD_STATE_TRANSFER = 0x00000006U, /*!< SD Transfert State */ + HAL_SD_STATE_ERROR = 0x0000000FU /*!< SD is in error state */ +}HAL_SD_StateTypeDef; +/** + * @} + */ + +/** @defgroup SD_Exported_Types_Group2 SD Card State enumeration structure + * @{ + */ +typedef enum +{ + HAL_SD_CARD_READY = 0x00000001U, /*!< Card state is ready */ + HAL_SD_CARD_IDENTIFICATION = 0x00000002U, /*!< Card is in identification state */ + HAL_SD_CARD_STANDBY = 0x00000003U, /*!< Card is in standby state */ + HAL_SD_CARD_TRANSFER = 0x00000004U, /*!< Card is in transfer state */ + HAL_SD_CARD_SENDING = 0x00000005U, /*!< Card is sending an operation */ + HAL_SD_CARD_RECEIVING = 0x00000006U, /*!< Card is receiving operation information */ + HAL_SD_CARD_PROGRAMMING = 0x00000007U, /*!< Card is in programming state */ + HAL_SD_CARD_DISCONNECTED = 0x00000008U, /*!< Card is disconnected */ + HAL_SD_CARD_ERROR = 0x000000FFU /*!< Card response Error */ +}HAL_SD_CardStateTypeDef; +/** + * @} + */ + +/** @defgroup SD_Exported_Types_Group3 SD Handle Structure definition + * @{ + */ +#define SD_InitTypeDef SDIO_InitTypeDef +#define SD_TypeDef SDIO_TypeDef + +/** + * @brief SD Card Information Structure definition + */ +typedef struct +{ + uint32_t CardType; /*!< Specifies the card Type */ + + uint32_t CardVersion; /*!< Specifies the card version */ + + uint32_t Class; /*!< Specifies the class of the card class */ + + uint32_t RelCardAdd; /*!< Specifies the Relative Card Address */ + + uint32_t BlockNbr; /*!< Specifies the Card Capacity in blocks */ + + uint32_t BlockSize; /*!< Specifies one block size in bytes */ + + uint32_t LogBlockNbr; /*!< Specifies the Card logical Capacity in blocks */ + + uint32_t LogBlockSize; /*!< Specifies logical block size in bytes */ + +}HAL_SD_CardInfoTypeDef; + +/** + * @brief SD handle Structure definition + */ +typedef struct __SD_HandleTypeDef +{ + SD_TypeDef *Instance; /*!< SD registers base address */ + + SD_InitTypeDef Init; /*!< SD required parameters */ + + HAL_LockTypeDef Lock; /*!< SD locking object */ + + uint32_t *pTxBuffPtr; /*!< Pointer to SD Tx transfer Buffer */ + + uint32_t TxXferSize; /*!< SD Tx Transfer size */ + + uint32_t *pRxBuffPtr; /*!< Pointer to SD Rx transfer Buffer */ + + uint32_t RxXferSize; /*!< SD Rx Transfer size */ + + __IO uint32_t Context; /*!< SD transfer context */ + + __IO HAL_SD_StateTypeDef State; /*!< SD card State */ + + __IO uint32_t ErrorCode; /*!< SD Card Error codes */ + + DMA_HandleTypeDef *hdmarx; /*!< SD Rx DMA handle parameters */ + + DMA_HandleTypeDef *hdmatx; /*!< SD Tx DMA handle parameters */ + + HAL_SD_CardInfoTypeDef SdCard; /*!< SD Card information */ + + uint32_t CSD[4]; /*!< SD card specific data table */ + + uint32_t CID[4]; /*!< SD card identification number table */ + +#if (USE_HAL_SD_REGISTER_CALLBACKS == 1) + void (* TxCpltCallback) (struct __SD_HandleTypeDef *hsd); + void (* RxCpltCallback) (struct __SD_HandleTypeDef *hsd); + void (* ErrorCallback) (struct __SD_HandleTypeDef *hsd); + void (* AbortCpltCallback) (struct __SD_HandleTypeDef *hsd); + + void (* MspInitCallback) (struct __SD_HandleTypeDef *hsd); + void (* MspDeInitCallback) (struct __SD_HandleTypeDef *hsd); +#endif +}SD_HandleTypeDef; + +/** + * @} + */ + +/** @defgroup SD_Exported_Types_Group4 Card Specific Data: CSD Register + * @{ + */ +typedef struct +{ + __IO uint8_t CSDStruct; /*!< CSD structure */ + __IO uint8_t SysSpecVersion; /*!< System specification version */ + __IO uint8_t Reserved1; /*!< Reserved */ + __IO uint8_t TAAC; /*!< Data read access time 1 */ + __IO uint8_t NSAC; /*!< Data read access time 2 in CLK cycles */ + __IO uint8_t MaxBusClkFrec; /*!< Max. bus clock frequency */ + __IO uint16_t CardComdClasses; /*!< Card command classes */ + __IO uint8_t RdBlockLen; /*!< Max. read data block length */ + __IO uint8_t PartBlockRead; /*!< Partial blocks for read allowed */ + __IO uint8_t WrBlockMisalign; /*!< Write block misalignment */ + __IO uint8_t RdBlockMisalign; /*!< Read block misalignment */ + __IO uint8_t DSRImpl; /*!< DSR implemented */ + __IO uint8_t Reserved2; /*!< Reserved */ + __IO uint32_t DeviceSize; /*!< Device Size */ + __IO uint8_t MaxRdCurrentVDDMin; /*!< Max. read current @ VDD min */ + __IO uint8_t MaxRdCurrentVDDMax; /*!< Max. read current @ VDD max */ + __IO uint8_t MaxWrCurrentVDDMin; /*!< Max. write current @ VDD min */ + __IO uint8_t MaxWrCurrentVDDMax; /*!< Max. write current @ VDD max */ + __IO uint8_t DeviceSizeMul; /*!< Device size multiplier */ + __IO uint8_t EraseGrSize; /*!< Erase group size */ + __IO uint8_t EraseGrMul; /*!< Erase group size multiplier */ + __IO uint8_t WrProtectGrSize; /*!< Write protect group size */ + __IO uint8_t WrProtectGrEnable; /*!< Write protect group enable */ + __IO uint8_t ManDeflECC; /*!< Manufacturer default ECC */ + __IO uint8_t WrSpeedFact; /*!< Write speed factor */ + __IO uint8_t MaxWrBlockLen; /*!< Max. write data block length */ + __IO uint8_t WriteBlockPaPartial; /*!< Partial blocks for write allowed */ + __IO uint8_t Reserved3; /*!< Reserved */ + __IO uint8_t ContentProtectAppli; /*!< Content protection application */ + __IO uint8_t FileFormatGrouop; /*!< File format group */ + __IO uint8_t CopyFlag; /*!< Copy flag (OTP) */ + __IO uint8_t PermWrProtect; /*!< Permanent write protection */ + __IO uint8_t TempWrProtect; /*!< Temporary write protection */ + __IO uint8_t FileFormat; /*!< File format */ + __IO uint8_t ECC; /*!< ECC code */ + __IO uint8_t CSD_CRC; /*!< CSD CRC */ + __IO uint8_t Reserved4; /*!< Always 1 */ + +}HAL_SD_CardCSDTypeDef; +/** + * @} + */ + +/** @defgroup SD_Exported_Types_Group5 Card Identification Data: CID Register + * @{ + */ +typedef struct +{ + __IO uint8_t ManufacturerID; /*!< Manufacturer ID */ + __IO uint16_t OEM_AppliID; /*!< OEM/Application ID */ + __IO uint32_t ProdName1; /*!< Product Name part1 */ + __IO uint8_t ProdName2; /*!< Product Name part2 */ + __IO uint8_t ProdRev; /*!< Product Revision */ + __IO uint32_t ProdSN; /*!< Product Serial Number */ + __IO uint8_t Reserved1; /*!< Reserved1 */ + __IO uint16_t ManufactDate; /*!< Manufacturing Date */ + __IO uint8_t CID_CRC; /*!< CID CRC */ + __IO uint8_t Reserved2; /*!< Always 1 */ + +}HAL_SD_CardCIDTypeDef; +/** + * @} + */ + +/** @defgroup SD_Exported_Types_Group6 SD Card Status returned by ACMD13 + * @{ + */ +typedef struct +{ + __IO uint8_t DataBusWidth; /*!< Shows the currently defined data bus width */ + __IO uint8_t SecuredMode; /*!< Card is in secured mode of operation */ + __IO uint16_t CardType; /*!< Carries information about card type */ + __IO uint32_t ProtectedAreaSize; /*!< Carries information about the capacity of protected area */ + __IO uint8_t SpeedClass; /*!< Carries information about the speed class of the card */ + __IO uint8_t PerformanceMove; /*!< Carries information about the card's performance move */ + __IO uint8_t AllocationUnitSize; /*!< Carries information about the card's allocation unit size */ + __IO uint16_t EraseSize; /*!< Determines the number of AUs to be erased in one operation */ + __IO uint8_t EraseTimeout; /*!< Determines the timeout for any number of AU erase */ + __IO uint8_t EraseOffset; /*!< Carries information about the erase offset */ + +}HAL_SD_CardStatusTypeDef; +/** + * @} + */ + +#if (USE_HAL_SD_REGISTER_CALLBACKS == 1) +/** @defgroup SD_Exported_Types_Group7 SD Callback ID enumeration definition + * @{ + */ +typedef enum +{ + HAL_SD_TX_CPLT_CB_ID = 0x00U, /*!< SD Tx Complete Callback ID */ + HAL_SD_RX_CPLT_CB_ID = 0x01U, /*!< SD Rx Complete Callback ID */ + HAL_SD_ERROR_CB_ID = 0x02U, /*!< SD Error Callback ID */ + HAL_SD_ABORT_CB_ID = 0x03U, /*!< SD Abort Callback ID */ + + HAL_SD_MSP_INIT_CB_ID = 0x10U, /*!< SD MspInit Callback ID */ + HAL_SD_MSP_DEINIT_CB_ID = 0x11U /*!< SD MspDeInit Callback ID */ +}HAL_SD_CallbackIDTypeDef; +/** + * @} + */ + +/** @defgroup SD_Exported_Types_Group8 SD Callback pointer definition + * @{ + */ +typedef void (*pSD_CallbackTypeDef) (SD_HandleTypeDef *hsd); +/** + * @} + */ +#endif +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup SD_Exported_Constants Exported Constants + * @{ + */ + +#define BLOCKSIZE 512U /*!< Block size is 512 bytes */ + +/** @defgroup SD_Exported_Constansts_Group1 SD Error status enumeration Structure definition + * @{ + */ +#define HAL_SD_ERROR_NONE SDMMC_ERROR_NONE /*!< No error */ +#define HAL_SD_ERROR_CMD_CRC_FAIL SDMMC_ERROR_CMD_CRC_FAIL /*!< Command response received (but CRC check failed) */ +#define HAL_SD_ERROR_DATA_CRC_FAIL SDMMC_ERROR_DATA_CRC_FAIL /*!< Data block sent/received (CRC check failed) */ +#define HAL_SD_ERROR_CMD_RSP_TIMEOUT SDMMC_ERROR_CMD_RSP_TIMEOUT /*!< Command response timeout */ +#define HAL_SD_ERROR_DATA_TIMEOUT SDMMC_ERROR_DATA_TIMEOUT /*!< Data timeout */ +#define HAL_SD_ERROR_TX_UNDERRUN SDMMC_ERROR_TX_UNDERRUN /*!< Transmit FIFO underrun */ +#define HAL_SD_ERROR_RX_OVERRUN SDMMC_ERROR_RX_OVERRUN /*!< Receive FIFO overrun */ +#define HAL_SD_ERROR_ADDR_MISALIGNED SDMMC_ERROR_ADDR_MISALIGNED /*!< Misaligned address */ +#define HAL_SD_ERROR_BLOCK_LEN_ERR SDMMC_ERROR_BLOCK_LEN_ERR /*!< Transferred block length is not allowed for the card or the + number of transferred bytes does not match the block length */ +#define HAL_SD_ERROR_ERASE_SEQ_ERR SDMMC_ERROR_ERASE_SEQ_ERR /*!< An error in the sequence of erase command occurs */ +#define HAL_SD_ERROR_BAD_ERASE_PARAM SDMMC_ERROR_BAD_ERASE_PARAM /*!< An invalid selection for erase groups */ +#define HAL_SD_ERROR_WRITE_PROT_VIOLATION SDMMC_ERROR_WRITE_PROT_VIOLATION /*!< Attempt to program a write protect block */ +#define HAL_SD_ERROR_LOCK_UNLOCK_FAILED SDMMC_ERROR_LOCK_UNLOCK_FAILED /*!< Sequence or password error has been detected in unlock + command or if there was an attempt to access a locked card */ +#define HAL_SD_ERROR_COM_CRC_FAILED SDMMC_ERROR_COM_CRC_FAILED /*!< CRC check of the previous command failed */ +#define HAL_SD_ERROR_ILLEGAL_CMD SDMMC_ERROR_ILLEGAL_CMD /*!< Command is not legal for the card state */ +#define HAL_SD_ERROR_CARD_ECC_FAILED SDMMC_ERROR_CARD_ECC_FAILED /*!< Card internal ECC was applied but failed to correct the data */ +#define HAL_SD_ERROR_CC_ERR SDMMC_ERROR_CC_ERR /*!< Internal card controller error */ +#define HAL_SD_ERROR_GENERAL_UNKNOWN_ERR SDMMC_ERROR_GENERAL_UNKNOWN_ERR /*!< General or unknown error */ +#define HAL_SD_ERROR_STREAM_READ_UNDERRUN SDMMC_ERROR_STREAM_READ_UNDERRUN /*!< The card could not sustain data reading in stream rmode */ +#define HAL_SD_ERROR_STREAM_WRITE_OVERRUN SDMMC_ERROR_STREAM_WRITE_OVERRUN /*!< The card could not sustain data programming in stream mode */ +#define HAL_SD_ERROR_CID_CSD_OVERWRITE SDMMC_ERROR_CID_CSD_OVERWRITE /*!< CID/CSD overwrite error */ +#define HAL_SD_ERROR_WP_ERASE_SKIP SDMMC_ERROR_WP_ERASE_SKIP /*!< Only partial address space was erased */ +#define HAL_SD_ERROR_CARD_ECC_DISABLED SDMMC_ERROR_CARD_ECC_DISABLED /*!< Command has been executed without using internal ECC */ +#define HAL_SD_ERROR_ERASE_RESET SDMMC_ERROR_ERASE_RESET /*!< Erase sequence was cleared before executing because an out + of erase sequence command was received */ +#define HAL_SD_ERROR_AKE_SEQ_ERR SDMMC_ERROR_AKE_SEQ_ERR /*!< Error in sequence of authentication */ +#define HAL_SD_ERROR_INVALID_VOLTRANGE SDMMC_ERROR_INVALID_VOLTRANGE /*!< Error in case of invalid voltage range */ +#define HAL_SD_ERROR_ADDR_OUT_OF_RANGE SDMMC_ERROR_ADDR_OUT_OF_RANGE /*!< Error when addressed block is out of range */ +#define HAL_SD_ERROR_REQUEST_NOT_APPLICABLE SDMMC_ERROR_REQUEST_NOT_APPLICABLE /*!< Error when command request is not applicable */ +#define HAL_SD_ERROR_PARAM SDMMC_ERROR_INVALID_PARAMETER /*!< the used parameter is not valid */ +#define HAL_SD_ERROR_UNSUPPORTED_FEATURE SDMMC_ERROR_UNSUPPORTED_FEATURE /*!< Error when feature is not insupported */ +#define HAL_SD_ERROR_BUSY SDMMC_ERROR_BUSY /*!< Error when transfer process is busy */ +#define HAL_SD_ERROR_DMA SDMMC_ERROR_DMA /*!< Error while DMA transfer */ +#define HAL_SD_ERROR_TIMEOUT SDMMC_ERROR_TIMEOUT /*!< Timeout error */ + +#if (USE_HAL_SD_REGISTER_CALLBACKS == 1) +#define HAL_SD_ERROR_INVALID_CALLBACK SDMMC_ERROR_INVALID_PARAMETER /*!< Invalid callback error */ +#endif + +/** + * @} + */ + +/** @defgroup SD_Exported_Constansts_Group2 SD context enumeration + * @{ + */ +#define SD_CONTEXT_NONE 0x00000000U /*!< None */ +#define SD_CONTEXT_READ_SINGLE_BLOCK 0x00000001U /*!< Read single block operation */ +#define SD_CONTEXT_READ_MULTIPLE_BLOCK 0x00000002U /*!< Read multiple blocks operation */ +#define SD_CONTEXT_WRITE_SINGLE_BLOCK 0x00000010U /*!< Write single block operation */ +#define SD_CONTEXT_WRITE_MULTIPLE_BLOCK 0x00000020U /*!< Write multiple blocks operation */ +#define SD_CONTEXT_IT 0x00000008U /*!< Process in Interrupt mode */ +#define SD_CONTEXT_DMA 0x00000080U /*!< Process in DMA mode */ + +/** + * @} + */ + +/** @defgroup SD_Exported_Constansts_Group3 SD Supported Memory Cards + * @{ + */ +#define CARD_SDSC 0x00000000U +#define CARD_SDHC_SDXC 0x00000001U +#define CARD_SECURED 0x00000003U + +/** + * @} + */ + +/** @defgroup SD_Exported_Constansts_Group4 SD Supported Version + * @{ + */ +#define CARD_V1_X 0x00000000U +#define CARD_V2_X 0x00000001U +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup SD_Exported_macros SD Exported Macros + * @brief macros to handle interrupts and specific clock configurations + * @{ + */ +/** @brief Reset SD handle state. + * @param __HANDLE__ : SD handle. + * @retval None + */ +#if (USE_HAL_SD_REGISTER_CALLBACKS == 1) +#define __HAL_SD_RESET_HANDLE_STATE(__HANDLE__) do { \ + (__HANDLE__)->State = HAL_SD_STATE_RESET; \ + (__HANDLE__)->MspInitCallback = NULL; \ + (__HANDLE__)->MspDeInitCallback = NULL; \ + } while(0) +#else +#define __HAL_SD_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_SD_STATE_RESET) +#endif + +/** + * @brief Enable the SD device. + * @retval None + */ +#define __HAL_SD_ENABLE(__HANDLE__) __SDIO_ENABLE((__HANDLE__)->Instance) + +/** + * @brief Disable the SD device. + * @retval None + */ +#define __HAL_SD_DISABLE(__HANDLE__) __SDIO_DISABLE((__HANDLE__)->Instance) + +/** + * @brief Enable the SDMMC DMA transfer. + * @retval None + */ +#define __HAL_SD_DMA_ENABLE(__HANDLE__) __SDIO_DMA_ENABLE((__HANDLE__)->Instance) + +/** + * @brief Disable the SDMMC DMA transfer. + * @retval None + */ +#define __HAL_SD_DMA_DISABLE(__HANDLE__) __SDIO_DMA_DISABLE((__HANDLE__)->Instance) + +/** + * @brief Enable the SD device interrupt. + * @param __HANDLE__ SD Handle + * @param __INTERRUPT__ specifies the SDMMC interrupt sources to be enabled. + * This parameter can be one or a combination of the following values: + * @arg SDIO_IT_CCRCFAIL: Command response received (CRC check failed) interrupt + * @arg SDIO_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt + * @arg SDIO_IT_CTIMEOUT: Command response timeout interrupt + * @arg SDIO_IT_DTIMEOUT: Data timeout interrupt + * @arg SDIO_IT_TXUNDERR: Transmit FIFO underrun error interrupt + * @arg SDIO_IT_RXOVERR: Received FIFO overrun error interrupt + * @arg SDIO_IT_CMDREND: Command response received (CRC check passed) interrupt + * @arg SDIO_IT_CMDSENT: Command sent (no response required) interrupt + * @arg SDIO_IT_DATAEND: Data end (data counter, SDIDCOUNT, is zero) interrupt + * @arg SDIO_IT_DBCKEND: Data block sent/received (CRC check passed) interrupt + * @arg SDIO_IT_CMDACT: Command transfer in progress interrupt + * @arg SDIO_IT_TXACT: Data transmit in progress interrupt + * @arg SDIO_IT_RXACT: Data receive in progress interrupt + * @arg SDIO_IT_TXFIFOHE: Transmit FIFO Half Empty interrupt + * @arg SDIO_IT_RXFIFOHF: Receive FIFO Half Full interrupt + * @arg SDIO_IT_TXFIFOF: Transmit FIFO full interrupt + * @arg SDIO_IT_RXFIFOF: Receive FIFO full interrupt + * @arg SDIO_IT_TXFIFOE: Transmit FIFO empty interrupt + * @arg SDIO_IT_RXFIFOE: Receive FIFO empty interrupt + * @arg SDIO_IT_TXDAVL: Data available in transmit FIFO interrupt + * @arg SDIO_IT_RXDAVL: Data available in receive FIFO interrupt + * @arg SDIO_IT_SDIOIT: SD I/O interrupt received interrupt + * @retval None + */ +#define __HAL_SD_ENABLE_IT(__HANDLE__, __INTERRUPT__) __SDIO_ENABLE_IT((__HANDLE__)->Instance, (__INTERRUPT__)) + +/** + * @brief Disable the SD device interrupt. + * @param __HANDLE__ SD Handle + * @param __INTERRUPT__ specifies the SDMMC interrupt sources to be disabled. + * This parameter can be one or a combination of the following values: + * @arg SDIO_IT_CCRCFAIL: Command response received (CRC check failed) interrupt + * @arg SDIO_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt + * @arg SDIO_IT_CTIMEOUT: Command response timeout interrupt + * @arg SDIO_IT_DTIMEOUT: Data timeout interrupt + * @arg SDIO_IT_TXUNDERR: Transmit FIFO underrun error interrupt + * @arg SDIO_IT_RXOVERR: Received FIFO overrun error interrupt + * @arg SDIO_IT_CMDREND: Command response received (CRC check passed) interrupt + * @arg SDIO_IT_CMDSENT: Command sent (no response required) interrupt + * @arg SDIO_IT_DATAEND: Data end (data counter, SDIDCOUNT, is zero) interrupt + * @arg SDIO_IT_DBCKEND: Data block sent/received (CRC check passed) interrupt + * @arg SDIO_IT_CMDACT: Command transfer in progress interrupt + * @arg SDIO_IT_TXACT: Data transmit in progress interrupt + * @arg SDIO_IT_RXACT: Data receive in progress interrupt + * @arg SDIO_IT_TXFIFOHE: Transmit FIFO Half Empty interrupt + * @arg SDIO_IT_RXFIFOHF: Receive FIFO Half Full interrupt + * @arg SDIO_IT_TXFIFOF: Transmit FIFO full interrupt + * @arg SDIO_IT_RXFIFOF: Receive FIFO full interrupt + * @arg SDIO_IT_TXFIFOE: Transmit FIFO empty interrupt + * @arg SDIO_IT_RXFIFOE: Receive FIFO empty interrupt + * @arg SDIO_IT_TXDAVL: Data available in transmit FIFO interrupt + * @arg SDIO_IT_RXDAVL: Data available in receive FIFO interrupt + * @arg SDIO_IT_SDIOIT: SD I/O interrupt received interrupt + * @retval None + */ +#define __HAL_SD_DISABLE_IT(__HANDLE__, __INTERRUPT__) __SDIO_DISABLE_IT((__HANDLE__)->Instance, (__INTERRUPT__)) + +/** + * @brief Check whether the specified SD flag is set or not. + * @param __HANDLE__ SD Handle + * @param __FLAG__ specifies the flag to check. + * This parameter can be one of the following values: + * @arg SDIO_FLAG_CCRCFAIL: Command response received (CRC check failed) + * @arg SDIO_FLAG_DCRCFAIL: Data block sent/received (CRC check failed) + * @arg SDIO_FLAG_CTIMEOUT: Command response timeout + * @arg SDIO_FLAG_DTIMEOUT: Data timeout + * @arg SDIO_FLAG_TXUNDERR: Transmit FIFO underrun error + * @arg SDIO_FLAG_RXOVERR: Received FIFO overrun error + * @arg SDIO_FLAG_CMDREND: Command response received (CRC check passed) + * @arg SDIO_FLAG_CMDSENT: Command sent (no response required) + * @arg SDIO_FLAG_DATAEND: Data end (data counter, SDIDCOUNT, is zero) + * @arg SDIO_FLAG_DBCKEND: Data block sent/received (CRC check passed) + * @arg SDIO_FLAG_CMDACT: Command transfer in progress + * @arg SDIO_FLAG_TXACT: Data transmit in progress + * @arg SDIO_FLAG_RXACT: Data receive in progress + * @arg SDIO_FLAG_TXFIFOHE: Transmit FIFO Half Empty + * @arg SDIO_FLAG_RXFIFOHF: Receive FIFO Half Full + * @arg SDIO_FLAG_TXFIFOF: Transmit FIFO full + * @arg SDIO_FLAG_RXFIFOF: Receive FIFO full + * @arg SDIO_FLAG_TXFIFOE: Transmit FIFO empty + * @arg SDIO_FLAG_RXFIFOE: Receive FIFO empty + * @arg SDIO_FLAG_TXDAVL: Data available in transmit FIFO + * @arg SDIO_FLAG_RXDAVL: Data available in receive FIFO + * @arg SDIO_FLAG_SDIOIT: SD I/O interrupt received + * @retval The new state of SD FLAG (SET or RESET). + */ +#define __HAL_SD_GET_FLAG(__HANDLE__, __FLAG__) __SDIO_GET_FLAG((__HANDLE__)->Instance, (__FLAG__)) + +/** + * @brief Clear the SD's pending flags. + * @param __HANDLE__ SD Handle + * @param __FLAG__ specifies the flag to clear. + * This parameter can be one or a combination of the following values: + * @arg SDIO_FLAG_CCRCFAIL: Command response received (CRC check failed) + * @arg SDIO_FLAG_DCRCFAIL: Data block sent/received (CRC check failed) + * @arg SDIO_FLAG_CTIMEOUT: Command response timeout + * @arg SDIO_FLAG_DTIMEOUT: Data timeout + * @arg SDIO_FLAG_TXUNDERR: Transmit FIFO underrun error + * @arg SDIO_FLAG_RXOVERR: Received FIFO overrun error + * @arg SDIO_FLAG_CMDREND: Command response received (CRC check passed) + * @arg SDIO_FLAG_CMDSENT: Command sent (no response required) + * @arg SDIO_FLAG_DATAEND: Data end (data counter, SDIDCOUNT, is zero) + * @arg SDIO_FLAG_DBCKEND: Data block sent/received (CRC check passed) + * @arg SDIO_FLAG_SDIOIT: SD I/O interrupt received + * @retval None + */ +#define __HAL_SD_CLEAR_FLAG(__HANDLE__, __FLAG__) __SDIO_CLEAR_FLAG((__HANDLE__)->Instance, (__FLAG__)) + +/** + * @brief Check whether the specified SD interrupt has occurred or not. + * @param __HANDLE__ SD Handle + * @param __INTERRUPT__ specifies the SDMMC interrupt source to check. + * This parameter can be one of the following values: + * @arg SDIO_IT_CCRCFAIL: Command response received (CRC check failed) interrupt + * @arg SDIO_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt + * @arg SDIO_IT_CTIMEOUT: Command response timeout interrupt + * @arg SDIO_IT_DTIMEOUT: Data timeout interrupt + * @arg SDIO_IT_TXUNDERR: Transmit FIFO underrun error interrupt + * @arg SDIO_IT_RXOVERR: Received FIFO overrun error interrupt + * @arg SDIO_IT_CMDREND: Command response received (CRC check passed) interrupt + * @arg SDIO_IT_CMDSENT: Command sent (no response required) interrupt + * @arg SDIO_IT_DATAEND: Data end (data counter, SDIDCOUNT, is zero) interrupt + * @arg SDIO_IT_DBCKEND: Data block sent/received (CRC check passed) interrupt + * @arg SDIO_IT_CMDACT: Command transfer in progress interrupt + * @arg SDIO_IT_TXACT: Data transmit in progress interrupt + * @arg SDIO_IT_RXACT: Data receive in progress interrupt + * @arg SDIO_IT_TXFIFOHE: Transmit FIFO Half Empty interrupt + * @arg SDIO_IT_RXFIFOHF: Receive FIFO Half Full interrupt + * @arg SDIO_IT_TXFIFOF: Transmit FIFO full interrupt + * @arg SDIO_IT_RXFIFOF: Receive FIFO full interrupt + * @arg SDIO_IT_TXFIFOE: Transmit FIFO empty interrupt + * @arg SDIO_IT_RXFIFOE: Receive FIFO empty interrupt + * @arg SDIO_IT_TXDAVL: Data available in transmit FIFO interrupt + * @arg SDIO_IT_RXDAVL: Data available in receive FIFO interrupt + * @arg SDIO_IT_SDIOIT: SD I/O interrupt received interrupt + * @retval The new state of SD IT (SET or RESET). + */ +#define __HAL_SD_GET_IT(__HANDLE__, __INTERRUPT__) __SDIO_GET_IT((__HANDLE__)->Instance, (__INTERRUPT__)) + +/** + * @brief Clear the SD's interrupt pending bits. + * @param __HANDLE__ SD Handle + * @param __INTERRUPT__ specifies the interrupt pending bit to clear. + * This parameter can be one or a combination of the following values: + * @arg SDIO_IT_CCRCFAIL: Command response received (CRC check failed) interrupt + * @arg SDIO_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt + * @arg SDIO_IT_CTIMEOUT: Command response timeout interrupt + * @arg SDIO_IT_DTIMEOUT: Data timeout interrupt + * @arg SDIO_IT_TXUNDERR: Transmit FIFO underrun error interrupt + * @arg SDIO_IT_RXOVERR: Received FIFO overrun error interrupt + * @arg SDIO_IT_CMDREND: Command response received (CRC check passed) interrupt + * @arg SDIO_IT_CMDSENT: Command sent (no response required) interrupt + * @arg SDIO_IT_DATAEND: Data end (data counter, SDMMC_DCOUNT, is zero) interrupt + * @arg SDIO_IT_SDIOIT: SD I/O interrupt received interrupt + * @retval None + */ +#define __HAL_SD_CLEAR_IT(__HANDLE__, __INTERRUPT__) __SDIO_CLEAR_IT((__HANDLE__)->Instance, (__INTERRUPT__)) + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup SD_Exported_Functions SD Exported Functions + * @{ + */ + +/** @defgroup SD_Exported_Functions_Group1 Initialization and de-initialization functions + * @{ + */ +HAL_StatusTypeDef HAL_SD_Init(SD_HandleTypeDef *hsd); +HAL_StatusTypeDef HAL_SD_InitCard(SD_HandleTypeDef *hsd); +HAL_StatusTypeDef HAL_SD_DeInit (SD_HandleTypeDef *hsd); +void HAL_SD_MspInit(SD_HandleTypeDef *hsd); +void HAL_SD_MspDeInit(SD_HandleTypeDef *hsd); +/** + * @} + */ + +/** @defgroup SD_Exported_Functions_Group2 Input and Output operation functions + * @{ + */ +/* Blocking mode: Polling */ +HAL_StatusTypeDef HAL_SD_ReadBlocks(SD_HandleTypeDef *hsd, uint8_t *pData, uint32_t BlockAdd, uint32_t NumberOfBlocks, uint32_t Timeout); +HAL_StatusTypeDef HAL_SD_WriteBlocks(SD_HandleTypeDef *hsd, uint8_t *pData, uint32_t BlockAdd, uint32_t NumberOfBlocks, uint32_t Timeout); +HAL_StatusTypeDef HAL_SD_Erase(SD_HandleTypeDef *hsd, uint32_t BlockStartAdd, uint32_t BlockEndAdd); +/* Non-Blocking mode: IT */ +HAL_StatusTypeDef HAL_SD_ReadBlocks_IT(SD_HandleTypeDef *hsd, uint8_t *pData, uint32_t BlockAdd, uint32_t NumberOfBlocks); +HAL_StatusTypeDef HAL_SD_WriteBlocks_IT(SD_HandleTypeDef *hsd, uint8_t *pData, uint32_t BlockAdd, uint32_t NumberOfBlocks); +/* Non-Blocking mode: DMA */ +HAL_StatusTypeDef HAL_SD_ReadBlocks_DMA(SD_HandleTypeDef *hsd, uint8_t *pData, uint32_t BlockAdd, uint32_t NumberOfBlocks); +HAL_StatusTypeDef HAL_SD_WriteBlocks_DMA(SD_HandleTypeDef *hsd, uint8_t *pData, uint32_t BlockAdd, uint32_t NumberOfBlocks); + +void HAL_SD_IRQHandler(SD_HandleTypeDef *hsd); + +/* Callback in non blocking modes (DMA) */ +void HAL_SD_TxCpltCallback(SD_HandleTypeDef *hsd); +void HAL_SD_RxCpltCallback(SD_HandleTypeDef *hsd); +void HAL_SD_ErrorCallback(SD_HandleTypeDef *hsd); +void HAL_SD_AbortCallback(SD_HandleTypeDef *hsd); + +#if (USE_HAL_SD_REGISTER_CALLBACKS == 1) +/* SD callback registering/unregistering */ +HAL_StatusTypeDef HAL_SD_RegisterCallback (SD_HandleTypeDef *hsd, HAL_SD_CallbackIDTypeDef CallbackId, pSD_CallbackTypeDef pCallback); +HAL_StatusTypeDef HAL_SD_UnRegisterCallback(SD_HandleTypeDef *hsd, HAL_SD_CallbackIDTypeDef CallbackId); +#endif +/** + * @} + */ + +/** @defgroup SD_Exported_Functions_Group3 Peripheral Control functions + * @{ + */ +HAL_StatusTypeDef HAL_SD_ConfigWideBusOperation(SD_HandleTypeDef *hsd, uint32_t WideMode); +/** + * @} + */ + +/** @defgroup SD_Exported_Functions_Group4 SD card related functions + * @{ + */ +HAL_StatusTypeDef HAL_SD_SendSDStatus(SD_HandleTypeDef *hsd, uint32_t *pSDstatus); +HAL_SD_CardStateTypeDef HAL_SD_GetCardState(SD_HandleTypeDef *hsd); +HAL_StatusTypeDef HAL_SD_GetCardCID(SD_HandleTypeDef *hsd, HAL_SD_CardCIDTypeDef *pCID); +HAL_StatusTypeDef HAL_SD_GetCardCSD(SD_HandleTypeDef *hsd, HAL_SD_CardCSDTypeDef *pCSD); +HAL_StatusTypeDef HAL_SD_GetCardStatus(SD_HandleTypeDef *hsd, HAL_SD_CardStatusTypeDef *pStatus); +HAL_StatusTypeDef HAL_SD_GetCardInfo(SD_HandleTypeDef *hsd, HAL_SD_CardInfoTypeDef *pCardInfo); +/** + * @} + */ + +/** @defgroup SD_Exported_Functions_Group5 Peripheral State and Errors functions + * @{ + */ +HAL_SD_StateTypeDef HAL_SD_GetState(SD_HandleTypeDef *hsd); +uint32_t HAL_SD_GetError(SD_HandleTypeDef *hsd); +/** + * @} + */ + +/** @defgroup SD_Exported_Functions_Group6 Perioheral Abort management + * @{ + */ +HAL_StatusTypeDef HAL_SD_Abort(SD_HandleTypeDef *hsd); +HAL_StatusTypeDef HAL_SD_Abort_IT(SD_HandleTypeDef *hsd); +/** + * @} + */ + +/* Private types -------------------------------------------------------------*/ +/** @defgroup SD_Private_Types SD Private Types + * @{ + */ + +/** + * @} + */ + +/* Private defines -----------------------------------------------------------*/ +/** @defgroup SD_Private_Defines SD Private Defines + * @{ + */ + +/** + * @} + */ + +/* Private variables ---------------------------------------------------------*/ +/** @defgroup SD_Private_Variables SD Private Variables + * @{ + */ + +/** + * @} + */ + +/* Private constants ---------------------------------------------------------*/ +/** @defgroup SD_Private_Constants SD Private Constants + * @{ + */ + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup SD_Private_Macros SD Private Macros + * @{ + */ + +/** + * @} + */ + +/* Private functions prototypes ----------------------------------------------*/ +/** @defgroup SD_Private_Functions_Prototypes SD Private Functions Prototypes + * @{ + */ + +/** + * @} + */ + +/* Private functions ---------------------------------------------------------*/ +/** @defgroup SD_Private_Functions SD Private Functions + * @{ + */ + +/** + * @} + */ + + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || + STM32F401xC || STM32F401xE || STM32F411xE || STM32F446xx || STM32F469xx || STM32F479xx || STM32F412Zx || STM32F412Vx || + STM32F412Rx || STM32F412Cx || STM32F413xx || STM32F423xx */ + +#ifdef __cplusplus +} +#endif + + +#endif /* __STM32F4xx_HAL_SD_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_sram.h b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_sram.h new file mode 100644 index 0000000..cb183b4 --- /dev/null +++ b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_sram.h @@ -0,0 +1,232 @@ +/** + ****************************************************************************** + * @file stm32f4xx_hal_sram.h + * @author MCD Application Team + * @brief Header file of SRAM HAL module. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2017 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F4xx_HAL_SRAM_H +#define __STM32F4xx_HAL_SRAM_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) || defined(STM32F412Zx) ||\ + defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F413xx) || defined(STM32F423xx) + #include "stm32f4xx_ll_fsmc.h" +#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F413xx || STM32F423xx */ + +#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx) ||\ + defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx) + #include "stm32f4xx_ll_fmc.h" +#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx || STM32F469xx || STM32F479xx */ + + +/** @addtogroup STM32F4xx_HAL_Driver + * @{ + */ + +#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) ||\ + defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\ + defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) ||\ + defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F413xx) || defined(STM32F423xx) + +/** @addtogroup SRAM + * @{ + */ + +/* Exported typedef ----------------------------------------------------------*/ + +/** @defgroup SRAM_Exported_Types SRAM Exported Types + * @{ + */ +/** + * @brief HAL SRAM State structures definition + */ +typedef enum +{ + HAL_SRAM_STATE_RESET = 0x00U, /*!< SRAM not yet initialized or disabled */ + HAL_SRAM_STATE_READY = 0x01U, /*!< SRAM initialized and ready for use */ + HAL_SRAM_STATE_BUSY = 0x02U, /*!< SRAM internal process is ongoing */ + HAL_SRAM_STATE_ERROR = 0x03U, /*!< SRAM error state */ + HAL_SRAM_STATE_PROTECTED = 0x04U /*!< SRAM peripheral NORSRAM device write protected */ + +} HAL_SRAM_StateTypeDef; + +/** + * @brief SRAM handle Structure definition + */ +#if (USE_HAL_SRAM_REGISTER_CALLBACKS == 1) +typedef struct __SRAM_HandleTypeDef +#else +typedef struct +#endif /* USE_HAL_SRAM_REGISTER_CALLBACKS */ +{ + FMC_NORSRAM_TypeDef *Instance; /*!< Register base address */ + + FMC_NORSRAM_EXTENDED_TypeDef *Extended; /*!< Extended mode register base address */ + + FMC_NORSRAM_InitTypeDef Init; /*!< SRAM device control configuration parameters */ + + HAL_LockTypeDef Lock; /*!< SRAM locking object */ + + __IO HAL_SRAM_StateTypeDef State; /*!< SRAM device access state */ + + DMA_HandleTypeDef *hdma; /*!< Pointer DMA handler */ + +#if (USE_HAL_SRAM_REGISTER_CALLBACKS == 1) + void (* MspInitCallback) ( struct __SRAM_HandleTypeDef * hsram); /*!< SRAM Msp Init callback */ + void (* MspDeInitCallback) ( struct __SRAM_HandleTypeDef * hsram); /*!< SRAM Msp DeInit callback */ + void (* DmaXferCpltCallback) ( DMA_HandleTypeDef * hdma); /*!< SRAM DMA Xfer Complete callback */ + void (* DmaXferErrorCallback) ( DMA_HandleTypeDef * hdma); /*!< SRAM DMA Xfer Error callback */ +#endif +} SRAM_HandleTypeDef; + +#if (USE_HAL_SRAM_REGISTER_CALLBACKS == 1) +/** + * @brief HAL SRAM Callback ID enumeration definition + */ +typedef enum +{ + HAL_SRAM_MSP_INIT_CB_ID = 0x00U, /*!< SRAM MspInit Callback ID */ + HAL_SRAM_MSP_DEINIT_CB_ID = 0x01U, /*!< SRAM MspDeInit Callback ID */ + HAL_SRAM_DMA_XFER_CPLT_CB_ID = 0x02U, /*!< SRAM DMA Xfer Complete Callback ID */ + HAL_SRAM_DMA_XFER_ERR_CB_ID = 0x03U /*!< SRAM DMA Xfer Complete Callback ID */ +}HAL_SRAM_CallbackIDTypeDef; + +/** + * @brief HAL SRAM Callback pointer definition + */ +typedef void (*pSRAM_CallbackTypeDef)(SRAM_HandleTypeDef *hsram); +typedef void (*pSRAM_DmaCallbackTypeDef)(DMA_HandleTypeDef *hdma); +#endif +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/* Exported macro ------------------------------------------------------------*/ + +/** @defgroup SRAM_Exported_Macros SRAM Exported Macros + * @{ + */ +/** @brief Reset SRAM handle state + * @param __HANDLE__ SRAM handle + * @retval None + */ +#if (USE_HAL_SRAM_REGISTER_CALLBACKS == 1) +#define __HAL_SRAM_RESET_HANDLE_STATE(__HANDLE__) do { \ + (__HANDLE__)->State = HAL_SRAM_STATE_RESET; \ + (__HANDLE__)->MspInitCallback = NULL; \ + (__HANDLE__)->MspDeInitCallback = NULL; \ + } while(0) +#else +#define __HAL_SRAM_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_SRAM_STATE_RESET) +#endif + +/** + * @} + */ +/* Exported functions --------------------------------------------------------*/ + +/** @addtogroup SRAM_Exported_Functions + * @{ + */ + +/** @addtogroup SRAM_Exported_Functions_Group1 + * @{ + */ +/* Initialization/de-initialization functions **********************************/ +HAL_StatusTypeDef HAL_SRAM_Init(SRAM_HandleTypeDef *hsram, FMC_NORSRAM_TimingTypeDef *Timing, FMC_NORSRAM_TimingTypeDef *ExtTiming); +HAL_StatusTypeDef HAL_SRAM_DeInit(SRAM_HandleTypeDef *hsram); +void HAL_SRAM_MspInit(SRAM_HandleTypeDef *hsram); +void HAL_SRAM_MspDeInit(SRAM_HandleTypeDef *hsram); + +void HAL_SRAM_DMA_XferCpltCallback(DMA_HandleTypeDef *hdma); +void HAL_SRAM_DMA_XferErrorCallback(DMA_HandleTypeDef *hdma); +/** + * @} + */ + +/** @addtogroup SRAM_Exported_Functions_Group2 + * @{ + */ +/* I/O operation functions *****************************************************/ +HAL_StatusTypeDef HAL_SRAM_Read_8b(SRAM_HandleTypeDef *hsram, uint32_t *pAddress, uint8_t *pDstBuffer, uint32_t BufferSize); +HAL_StatusTypeDef HAL_SRAM_Write_8b(SRAM_HandleTypeDef *hsram, uint32_t *pAddress, uint8_t *pSrcBuffer, uint32_t BufferSize); +HAL_StatusTypeDef HAL_SRAM_Read_16b(SRAM_HandleTypeDef *hsram, uint32_t *pAddress, uint16_t *pDstBuffer, uint32_t BufferSize); +HAL_StatusTypeDef HAL_SRAM_Write_16b(SRAM_HandleTypeDef *hsram, uint32_t *pAddress, uint16_t *pSrcBuffer, uint32_t BufferSize); +HAL_StatusTypeDef HAL_SRAM_Read_32b(SRAM_HandleTypeDef *hsram, uint32_t *pAddress, uint32_t *pDstBuffer, uint32_t BufferSize); +HAL_StatusTypeDef HAL_SRAM_Write_32b(SRAM_HandleTypeDef *hsram, uint32_t *pAddress, uint32_t *pSrcBuffer, uint32_t BufferSize); +HAL_StatusTypeDef HAL_SRAM_Read_DMA(SRAM_HandleTypeDef *hsram, uint32_t *pAddress, uint32_t *pDstBuffer, uint32_t BufferSize); +HAL_StatusTypeDef HAL_SRAM_Write_DMA(SRAM_HandleTypeDef *hsram, uint32_t *pAddress, uint32_t *pSrcBuffer, uint32_t BufferSize); +#if (USE_HAL_SRAM_REGISTER_CALLBACKS == 1) +/* SRAM callback registering/unregistering */ +HAL_StatusTypeDef HAL_SRAM_RegisterCallback(SRAM_HandleTypeDef *hsram, HAL_SRAM_CallbackIDTypeDef CallbackId, pSRAM_CallbackTypeDef pCallback); +HAL_StatusTypeDef HAL_SRAM_UnRegisterCallback(SRAM_HandleTypeDef *hsram, HAL_SRAM_CallbackIDTypeDef CallbackId); +HAL_StatusTypeDef HAL_SRAM_RegisterDmaCallback(SRAM_HandleTypeDef *hsram, HAL_SRAM_CallbackIDTypeDef CallbackId, pSRAM_DmaCallbackTypeDef pCallback); +#endif +/** + * @} + */ + +/** @addtogroup SRAM_Exported_Functions_Group3 + * @{ + */ +/* SRAM Control functions ******************************************************/ +HAL_StatusTypeDef HAL_SRAM_WriteOperation_Enable(SRAM_HandleTypeDef *hsram); +HAL_StatusTypeDef HAL_SRAM_WriteOperation_Disable(SRAM_HandleTypeDef *hsram); +/** + * @} + */ + +/** @addtogroup SRAM_Exported_Functions_Group4 + * @{ + */ +/* SRAM State functions *********************************************************/ +HAL_SRAM_StateTypeDef HAL_SRAM_GetState(SRAM_HandleTypeDef *hsram); +/** + * @} + */ + +/** + * @} + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ +/* Private functions ---------------------------------------------------------*/ +/** + * @} + */ + +#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F427xx || STM32F437xx ||\ + STM32F429xx || STM32F439xx || STM32F446xx || STM32F469xx || STM32F479xx || STM32F412Zx ||\ + STM32F412Vx || STM32F412Rx || STM32F413xx || STM32F423xx */ +/** + * @} + */ +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F4xx_HAL_SRAM_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_fsmc.h b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_fsmc.h new file mode 100644 index 0000000..c9a3b98 --- /dev/null +++ b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_fsmc.h @@ -0,0 +1,1033 @@ +/** + ****************************************************************************** + * @file stm32f4xx_ll_fsmc.h + * @author MCD Application Team + * @brief Header file of FSMC HAL module. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2017 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F4xx_LL_FSMC_H +#define __STM32F4xx_LL_FSMC_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f4xx_hal_def.h" + +/** @addtogroup STM32F4xx_HAL_Driver + * @{ + */ + +/** @addtogroup FSMC_LL + * @{ + */ + +#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) || defined(STM32F412Zx) ||\ + defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F413xx) || defined(STM32F423xx) +/* Private types -------------------------------------------------------------*/ +/** @defgroup FSMC_LL_Private_Types FSMC Private Types + * @{ + */ + +/** + * @brief FSMC NORSRAM Configuration Structure definition + */ +typedef struct +{ + uint32_t NSBank; /*!< Specifies the NORSRAM memory device that will be used. + This parameter can be a value of @ref FSMC_NORSRAM_Bank */ + + uint32_t DataAddressMux; /*!< Specifies whether the address and data values are + multiplexed on the data bus or not. + This parameter can be a value of @ref FSMC_Data_Address_Bus_Multiplexing */ + + uint32_t MemoryType; /*!< Specifies the type of external memory attached to + the corresponding memory device. + This parameter can be a value of @ref FSMC_Memory_Type */ + + uint32_t MemoryDataWidth; /*!< Specifies the external memory device width. + This parameter can be a value of @ref FSMC_NORSRAM_Data_Width */ + + uint32_t BurstAccessMode; /*!< Enables or disables the burst access mode for Flash memory, + valid only with synchronous burst Flash memories. + This parameter can be a value of @ref FSMC_Burst_Access_Mode */ + + uint32_t WaitSignalPolarity; /*!< Specifies the wait signal polarity, valid only when accessing + the Flash memory in burst mode. + This parameter can be a value of @ref FSMC_Wait_Signal_Polarity */ + + uint32_t WrapMode; /*!< Enables or disables the Wrapped burst access mode for Flash + memory, valid only when accessing Flash memories in burst mode. + This parameter can be a value of @ref FSMC_Wrap_Mode + This mode is available only for the STM32F405/407/4015/417xx devices */ + + uint32_t WaitSignalActive; /*!< Specifies if the wait signal is asserted by the memory one + clock cycle before the wait state or during the wait state, + valid only when accessing memories in burst mode. + This parameter can be a value of @ref FSMC_Wait_Timing */ + + uint32_t WriteOperation; /*!< Enables or disables the write operation in the selected device by the FSMC. + This parameter can be a value of @ref FSMC_Write_Operation */ + + uint32_t WaitSignal; /*!< Enables or disables the wait state insertion via wait + signal, valid for Flash memory access in burst mode. + This parameter can be a value of @ref FSMC_Wait_Signal */ + + uint32_t ExtendedMode; /*!< Enables or disables the extended mode. + This parameter can be a value of @ref FSMC_Extended_Mode */ + + uint32_t AsynchronousWait; /*!< Enables or disables wait signal during asynchronous transfers, + valid only with asynchronous Flash memories. + This parameter can be a value of @ref FSMC_AsynchronousWait */ + + uint32_t WriteBurst; /*!< Enables or disables the write burst operation. + This parameter can be a value of @ref FSMC_Write_Burst */ + + uint32_t ContinuousClock; /*!< Enables or disables the FMC clock output to external memory devices. + This parameter is only enabled through the FMC_BCR1 register, and don't care + through FMC_BCR2..4 registers. + This parameter can be a value of @ref FMC_Continous_Clock + This mode is available only for the STM32F412Vx/Zx/Rx devices */ + + uint32_t WriteFifo; /*!< Enables or disables the write FIFO used by the FMC controller. + This parameter is only enabled through the FMC_BCR1 register, and don't care + through FMC_BCR2..4 registers. + This parameter can be a value of @ref FMC_Write_FIFO + This mode is available only for the STM32F412Vx/Vx devices */ + + uint32_t PageSize; /*!< Specifies the memory page size. + This parameter can be a value of @ref FMC_Page_Size */ +}FSMC_NORSRAM_InitTypeDef; + +/** + * @brief FSMC NORSRAM Timing parameters structure definition + */ +typedef struct +{ + uint32_t AddressSetupTime; /*!< Defines the number of HCLK cycles to configure + the duration of the address setup time. + This parameter can be a value between Min_Data = 0 and Max_Data = 15. + @note This parameter is not used with synchronous NOR Flash memories. */ + + uint32_t AddressHoldTime; /*!< Defines the number of HCLK cycles to configure + the duration of the address hold time. + This parameter can be a value between Min_Data = 1 and Max_Data = 15. + @note This parameter is not used with synchronous NOR Flash memories. */ + + uint32_t DataSetupTime; /*!< Defines the number of HCLK cycles to configure + the duration of the data setup time. + This parameter can be a value between Min_Data = 1 and Max_Data = 255. + @note This parameter is used for SRAMs, ROMs and asynchronous multiplexed + NOR Flash memories. */ + + uint32_t BusTurnAroundDuration; /*!< Defines the number of HCLK cycles to configure + the duration of the bus turnaround. + This parameter can be a value between Min_Data = 0 and Max_Data = 15. + @note This parameter is only used for multiplexed NOR Flash memories. */ + + uint32_t CLKDivision; /*!< Defines the period of CLK clock output signal, expressed in number of + HCLK cycles. This parameter can be a value between Min_Data = 2 and Max_Data = 16. + @note This parameter is not used for asynchronous NOR Flash, SRAM or ROM + accesses. */ + + uint32_t DataLatency; /*!< Defines the number of memory clock cycles to issue + to the memory before getting the first data. + The parameter value depends on the memory type as shown below: + - It must be set to 0 in case of a CRAM + - It is don't care in asynchronous NOR, SRAM or ROM accesses + - It may assume a value between Min_Data = 2 and Max_Data = 17 in NOR Flash memories + with synchronous burst mode enable */ + + uint32_t AccessMode; /*!< Specifies the asynchronous access mode. + This parameter can be a value of @ref FSMC_Access_Mode */ + +}FSMC_NORSRAM_TimingTypeDef; + +#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) +/** + * @brief FSMC NAND Configuration Structure definition + */ +typedef struct +{ + uint32_t NandBank; /*!< Specifies the NAND memory device that will be used. + This parameter can be a value of @ref FSMC_NAND_Bank */ + + uint32_t Waitfeature; /*!< Enables or disables the Wait feature for the NAND Memory device. + This parameter can be any value of @ref FSMC_Wait_feature */ + + uint32_t MemoryDataWidth; /*!< Specifies the external memory device width. + This parameter can be any value of @ref FSMC_NAND_Data_Width */ + + uint32_t EccComputation; /*!< Enables or disables the ECC computation. + This parameter can be any value of @ref FSMC_ECC */ + + uint32_t ECCPageSize; /*!< Defines the page size for the extended ECC. + This parameter can be any value of @ref FSMC_ECC_Page_Size */ + + uint32_t TCLRSetupTime; /*!< Defines the number of HCLK cycles to configure the + delay between CLE low and RE low. + This parameter can be a value between Min_Data = 0 and Max_Data = 255 */ + + uint32_t TARSetupTime; /*!< Defines the number of HCLK cycles to configure the + delay between ALE low and RE low. + This parameter can be a number between Min_Data = 0 and Max_Data = 255 */ + +}FSMC_NAND_InitTypeDef; + +/** + * @brief FSMC NAND/PCCARD Timing parameters structure definition + */ +typedef struct +{ + uint32_t SetupTime; /*!< Defines the number of HCLK cycles to setup address before + the command assertion for NAND-Flash read or write access + to common/Attribute or I/O memory space (depending on + the memory space timing to be configured). + This parameter can be a value between Min_Data = 0 and Max_Data = 255 */ + + uint32_t WaitSetupTime; /*!< Defines the minimum number of HCLK cycles to assert the + command for NAND-Flash read or write access to + common/Attribute or I/O memory space (depending on the + memory space timing to be configured). + This parameter can be a number between Min_Data = 0 and Max_Data = 255 */ + + uint32_t HoldSetupTime; /*!< Defines the number of HCLK clock cycles to hold address + (and data for write access) after the command de-assertion + for NAND-Flash read or write access to common/Attribute + or I/O memory space (depending on the memory space timing + to be configured). + This parameter can be a number between Min_Data = 0 and Max_Data = 255 */ + + uint32_t HiZSetupTime; /*!< Defines the number of HCLK clock cycles during which the + data bus is kept in HiZ after the start of a NAND-Flash + write access to common/Attribute or I/O memory space (depending + on the memory space timing to be configured). + This parameter can be a number between Min_Data = 0 and Max_Data = 255 */ + +}FSMC_NAND_PCC_TimingTypeDef; + +/** + * @brief FSMC NAND Configuration Structure definition + */ +typedef struct +{ + uint32_t Waitfeature; /*!< Enables or disables the Wait feature for the PCCARD Memory device. + This parameter can be any value of @ref FSMC_Wait_feature */ + + uint32_t TCLRSetupTime; /*!< Defines the number of HCLK cycles to configure the + delay between CLE low and RE low. + This parameter can be a value between Min_Data = 0 and Max_Data = 255 */ + + uint32_t TARSetupTime; /*!< Defines the number of HCLK cycles to configure the + delay between ALE low and RE low. + This parameter can be a number between Min_Data = 0 and Max_Data = 255 */ + +}FSMC_PCCARD_InitTypeDef; +/** + * @} + */ +#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx */ + +/* Private constants ---------------------------------------------------------*/ +/** @defgroup FSMC_LL_Private_Constants FSMC Private Constants + * @{ + */ + +/** @defgroup FSMC_LL_NOR_SRAM_Controller FSMC NOR/SRAM Controller + * @{ + */ +/** @defgroup FSMC_NORSRAM_Bank FSMC NOR/SRAM Bank + * @{ + */ +#define FSMC_NORSRAM_BANK1 0x00000000U +#define FSMC_NORSRAM_BANK2 0x00000002U +#define FSMC_NORSRAM_BANK3 0x00000004U +#define FSMC_NORSRAM_BANK4 0x00000006U +/** + * @} + */ + +/** @defgroup FSMC_Data_Address_Bus_Multiplexing FSMC Data Address Bus Multiplexing + * @{ + */ +#define FSMC_DATA_ADDRESS_MUX_DISABLE 0x00000000U +#define FSMC_DATA_ADDRESS_MUX_ENABLE 0x00000002U +/** + * @} + */ + +/** @defgroup FSMC_Memory_Type FSMC Memory Type + * @{ + */ +#define FSMC_MEMORY_TYPE_SRAM 0x00000000U +#define FSMC_MEMORY_TYPE_PSRAM 0x00000004U +#define FSMC_MEMORY_TYPE_NOR 0x00000008U +/** + * @} + */ + +/** @defgroup FSMC_NORSRAM_Data_Width FSMC NOR/SRAM Data Width + * @{ + */ +#define FSMC_NORSRAM_MEM_BUS_WIDTH_8 0x00000000U +#define FSMC_NORSRAM_MEM_BUS_WIDTH_16 0x00000010U +#define FSMC_NORSRAM_MEM_BUS_WIDTH_32 0x00000020U +/** + * @} + */ + +/** @defgroup FSMC_NORSRAM_Flash_Access FSMC NOR/SRAM Flash Access + * @{ + */ +#define FSMC_NORSRAM_FLASH_ACCESS_ENABLE 0x00000040U +#define FSMC_NORSRAM_FLASH_ACCESS_DISABLE 0x00000000U +/** + * @} + */ + +/** @defgroup FSMC_Burst_Access_Mode FSMC Burst Access Mode + * @{ + */ +#define FSMC_BURST_ACCESS_MODE_DISABLE 0x00000000U +#define FSMC_BURST_ACCESS_MODE_ENABLE 0x00000100U +/** + * @} + */ + +/** @defgroup FSMC_Wait_Signal_Polarity FSMC Wait Signal Polarity + * @{ + */ +#define FSMC_WAIT_SIGNAL_POLARITY_LOW 0x00000000U +#define FSMC_WAIT_SIGNAL_POLARITY_HIGH 0x00000200U +/** + * @} + */ + +/** @defgroup FSMC_Wrap_Mode FSMC Wrap Mode + * @note These values are available only for the STM32F405/415/407/417xx devices. + * @{ + */ +#define FSMC_WRAP_MODE_DISABLE 0x00000000U +#define FSMC_WRAP_MODE_ENABLE 0x00000400U +/** + * @} + */ + +/** @defgroup FSMC_Wait_Timing FSMC Wait Timing + * @{ + */ +#define FSMC_WAIT_TIMING_BEFORE_WS 0x00000000U +#define FSMC_WAIT_TIMING_DURING_WS 0x00000800U +/** + * @} + */ + +/** @defgroup FSMC_Write_Operation FSMC Write Operation + * @{ + */ +#define FSMC_WRITE_OPERATION_DISABLE 0x00000000U +#define FSMC_WRITE_OPERATION_ENABLE 0x00001000U +/** + * @} + */ + +/** @defgroup FSMC_Wait_Signal FSMC Wait Signal + * @{ + */ +#define FSMC_WAIT_SIGNAL_DISABLE 0x00000000U +#define FSMC_WAIT_SIGNAL_ENABLE 0x00002000U +/** + * @} + */ + +/** @defgroup FSMC_Extended_Mode FSMC Extended Mode + * @{ + */ +#define FSMC_EXTENDED_MODE_DISABLE 0x00000000U +#define FSMC_EXTENDED_MODE_ENABLE 0x00004000U +/** + * @} + */ + +/** @defgroup FSMC_AsynchronousWait FSMC Asynchronous Wait + * @{ + */ +#define FSMC_ASYNCHRONOUS_WAIT_DISABLE 0x00000000U +#define FSMC_ASYNCHRONOUS_WAIT_ENABLE 0x00008000U +/** + * @} + */ + +/** @defgroup FSMC_Page_Size FSMC Page Size + * @{ + */ +#define FSMC_PAGE_SIZE_NONE 0x00000000U +#define FSMC_PAGE_SIZE_128 ((uint32_t)FSMC_BCR1_CPSIZE_0) +#define FSMC_PAGE_SIZE_256 ((uint32_t)FSMC_BCR1_CPSIZE_1) +#define FSMC_PAGE_SIZE_512 ((uint32_t)(FSMC_BCR1_CPSIZE_0 | FSMC_BCR1_CPSIZE_1)) +#define FSMC_PAGE_SIZE_1024 ((uint32_t)FSMC_BCR1_CPSIZE_2) +/** + * @} + */ + +/** @defgroup FSMC_Write_FIFO FSMC Write FIFO + * @note These values are available only for the STM32F412Vx/Zx/Rx devices. + * @{ + */ +#define FSMC_WRITE_FIFO_DISABLE ((uint32_t)FSMC_BCR1_WFDIS) +#define FSMC_WRITE_FIFO_ENABLE 0x00000000U +/** + * @} + */ + +/** @defgroup FSMC_Write_Burst FSMC Write Burst + * @{ + */ +#define FSMC_WRITE_BURST_DISABLE 0x00000000U +#define FSMC_WRITE_BURST_ENABLE 0x00080000U +/** + * @} + */ + +/** @defgroup FSMC_Continous_Clock FSMC Continous Clock + * @note These values are available only for the STM32F412Vx/Zx/Rx devices. + * @{ + */ +#define FSMC_CONTINUOUS_CLOCK_SYNC_ONLY 0x00000000U +#define FSMC_CONTINUOUS_CLOCK_SYNC_ASYNC 0x00100000U +/** + * @} + */ + +/** @defgroup FSMC_Access_Mode FSMC Access Mode + * @{ + */ +#define FSMC_ACCESS_MODE_A 0x00000000U +#define FSMC_ACCESS_MODE_B 0x10000000U +#define FSMC_ACCESS_MODE_C 0x20000000U +#define FSMC_ACCESS_MODE_D 0x30000000U +/** + * @} + */ +/** + * @} + */ + +#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) +/** @defgroup FSMC_LL_NAND_Controller FSMC NAND and PCCARD Controller + * @{ + */ +/** @defgroup FSMC_NAND_Bank FSMC NAND Bank + * @{ + */ +#define FSMC_NAND_BANK2 0x00000010U +#define FSMC_NAND_BANK3 0x00000100U +/** + * @} + */ + +/** @defgroup FSMC_Wait_feature FSMC Wait feature + * @{ + */ +#define FSMC_NAND_PCC_WAIT_FEATURE_DISABLE 0x00000000U +#define FSMC_NAND_PCC_WAIT_FEATURE_ENABLE 0x00000002U +/** + * @} + */ + +/** @defgroup FSMC_PCR_Memory_Type FSMC PCR Memory Type + * @{ + */ +#define FSMC_PCR_MEMORY_TYPE_PCCARD 0x00000000U +#define FSMC_PCR_MEMORY_TYPE_NAND 0x00000008U +/** + * @} + */ + +/** @defgroup FSMC_NAND_Data_Width FSMC NAND Data Width + * @{ + */ +#define FSMC_NAND_PCC_MEM_BUS_WIDTH_8 0x00000000U +#define FSMC_NAND_PCC_MEM_BUS_WIDTH_16 0x00000010U +/** + * @} + */ + +/** @defgroup FSMC_ECC FSMC ECC + * @{ + */ +#define FSMC_NAND_ECC_DISABLE 0x00000000U +#define FSMC_NAND_ECC_ENABLE 0x00000040U +/** + * @} + */ + +/** @defgroup FSMC_ECC_Page_Size FSMC ECC Page Size + * @{ + */ +#define FSMC_NAND_ECC_PAGE_SIZE_256BYTE 0x00000000U +#define FSMC_NAND_ECC_PAGE_SIZE_512BYTE 0x00020000U +#define FSMC_NAND_ECC_PAGE_SIZE_1024BYTE 0x00040000U +#define FSMC_NAND_ECC_PAGE_SIZE_2048BYTE 0x00060000U +#define FSMC_NAND_ECC_PAGE_SIZE_4096BYTE 0x00080000U +#define FSMC_NAND_ECC_PAGE_SIZE_8192BYTE 0x000A0000U +/** + * @} + */ +/** + * @} + */ +#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx */ + +/** @defgroup FSMC_LL_Interrupt_definition FSMC Interrupt definition + * @{ + */ +#define FSMC_IT_RISING_EDGE 0x00000008U +#define FSMC_IT_LEVEL 0x00000010U +#define FSMC_IT_FALLING_EDGE 0x00000020U +#define FSMC_IT_REFRESH_ERROR 0x00004000U +/** + * @} + */ + +/** @defgroup FSMC_LL_Flag_definition FSMC Flag definition + * @{ + */ +#define FSMC_FLAG_RISING_EDGE 0x00000001U +#define FSMC_FLAG_LEVEL 0x00000002U +#define FSMC_FLAG_FALLING_EDGE 0x00000004U +#define FSMC_FLAG_FEMPT 0x00000040U +/** + * @} + */ + +/** @defgroup FSMC_LL_Alias_definition FSMC Alias definition + * @{ + */ +#define FSMC_NORSRAM_TypeDef FSMC_Bank1_TypeDef +#define FSMC_NORSRAM_EXTENDED_TypeDef FSMC_Bank1E_TypeDef +#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) +#define FSMC_NAND_TypeDef FSMC_Bank2_3_TypeDef +#define FSMC_PCCARD_TypeDef FSMC_Bank4_TypeDef +#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx */ + +#define FSMC_NORSRAM_DEVICE FSMC_Bank1 +#define FSMC_NORSRAM_EXTENDED_DEVICE FSMC_Bank1E +#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) +#define FSMC_NAND_DEVICE FSMC_Bank2_3 +#define FSMC_PCCARD_DEVICE FSMC_Bank4 +#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx */ + +#define FMC_NORSRAM_MEM_BUS_WIDTH_8 FSMC_NORSRAM_MEM_BUS_WIDTH_8 +#define FMC_NORSRAM_MEM_BUS_WIDTH_16 FSMC_NORSRAM_MEM_BUS_WIDTH_16 +#define FMC_NORSRAM_MEM_BUS_WIDTH_32 FSMC_NORSRAM_MEM_BUS_WIDTH_32 + +#define FMC_NORSRAM_TypeDef FSMC_NORSRAM_TypeDef +#define FMC_NORSRAM_EXTENDED_TypeDef FSMC_NORSRAM_EXTENDED_TypeDef +#define FMC_NORSRAM_InitTypeDef FSMC_NORSRAM_InitTypeDef +#define FMC_NORSRAM_TimingTypeDef FSMC_NORSRAM_TimingTypeDef + +#define FMC_NORSRAM_Init FSMC_NORSRAM_Init +#define FMC_NORSRAM_Timing_Init FSMC_NORSRAM_Timing_Init +#define FMC_NORSRAM_Extended_Timing_Init FSMC_NORSRAM_Extended_Timing_Init +#define FMC_NORSRAM_DeInit FSMC_NORSRAM_DeInit +#define FMC_NORSRAM_WriteOperation_Enable FSMC_NORSRAM_WriteOperation_Enable +#define FMC_NORSRAM_WriteOperation_Disable FSMC_NORSRAM_WriteOperation_Disable + +#define __FMC_NORSRAM_ENABLE __FSMC_NORSRAM_ENABLE +#define __FMC_NORSRAM_DISABLE __FSMC_NORSRAM_DISABLE + +#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) +#define FMC_NAND_InitTypeDef FSMC_NAND_InitTypeDef +#define FMC_PCCARD_InitTypeDef FSMC_PCCARD_InitTypeDef +#define FMC_NAND_PCC_TimingTypeDef FSMC_NAND_PCC_TimingTypeDef + +#define FMC_NAND_Init FSMC_NAND_Init +#define FMC_NAND_CommonSpace_Timing_Init FSMC_NAND_CommonSpace_Timing_Init +#define FMC_NAND_AttributeSpace_Timing_Init FSMC_NAND_AttributeSpace_Timing_Init +#define FMC_NAND_DeInit FSMC_NAND_DeInit +#define FMC_NAND_ECC_Enable FSMC_NAND_ECC_Enable +#define FMC_NAND_ECC_Disable FSMC_NAND_ECC_Disable +#define FMC_NAND_GetECC FSMC_NAND_GetECC +#define FMC_PCCARD_Init FSMC_PCCARD_Init +#define FMC_PCCARD_CommonSpace_Timing_Init FSMC_PCCARD_CommonSpace_Timing_Init +#define FMC_PCCARD_AttributeSpace_Timing_Init FSMC_PCCARD_AttributeSpace_Timing_Init +#define FMC_PCCARD_IOSpace_Timing_Init FSMC_PCCARD_IOSpace_Timing_Init +#define FMC_PCCARD_DeInit FSMC_PCCARD_DeInit + +#define __FMC_NAND_ENABLE __FSMC_NAND_ENABLE +#define __FMC_NAND_DISABLE __FSMC_NAND_DISABLE +#define __FMC_PCCARD_ENABLE __FSMC_PCCARD_ENABLE +#define __FMC_PCCARD_DISABLE __FSMC_PCCARD_DISABLE +#define __FMC_NAND_ENABLE_IT __FSMC_NAND_ENABLE_IT +#define __FMC_NAND_DISABLE_IT __FSMC_NAND_DISABLE_IT +#define __FMC_NAND_GET_FLAG __FSMC_NAND_GET_FLAG +#define __FMC_NAND_CLEAR_FLAG __FSMC_NAND_CLEAR_FLAG +#define __FMC_PCCARD_ENABLE_IT __FSMC_PCCARD_ENABLE_IT +#define __FMC_PCCARD_DISABLE_IT __FSMC_PCCARD_DISABLE_IT +#define __FMC_PCCARD_GET_FLAG __FSMC_PCCARD_GET_FLAG +#define __FMC_PCCARD_CLEAR_FLAG __FSMC_PCCARD_CLEAR_FLAG +#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx */ + +#define FMC_NORSRAM_TypeDef FSMC_NORSRAM_TypeDef +#define FMC_NORSRAM_EXTENDED_TypeDef FSMC_NORSRAM_EXTENDED_TypeDef +#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) +#define FMC_NAND_TypeDef FSMC_NAND_TypeDef +#define FMC_PCCARD_TypeDef FSMC_PCCARD_TypeDef +#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx */ + +#define FMC_NORSRAM_DEVICE FSMC_NORSRAM_DEVICE +#define FMC_NORSRAM_EXTENDED_DEVICE FSMC_NORSRAM_EXTENDED_DEVICE +#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) +#define FMC_NAND_DEVICE FSMC_NAND_DEVICE +#define FMC_PCCARD_DEVICE FSMC_PCCARD_DEVICE + +#define FMC_NAND_BANK2 FSMC_NAND_BANK2 +#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx */ + +#define FMC_NORSRAM_BANK1 FSMC_NORSRAM_BANK1 +#define FMC_NORSRAM_BANK2 FSMC_NORSRAM_BANK2 +#define FMC_NORSRAM_BANK3 FSMC_NORSRAM_BANK3 + +#define FMC_IT_RISING_EDGE FSMC_IT_RISING_EDGE +#define FMC_IT_LEVEL FSMC_IT_LEVEL +#define FMC_IT_FALLING_EDGE FSMC_IT_FALLING_EDGE +#define FMC_IT_REFRESH_ERROR FSMC_IT_REFRESH_ERROR + +#define FMC_FLAG_RISING_EDGE FSMC_FLAG_RISING_EDGE +#define FMC_FLAG_LEVEL FSMC_FLAG_LEVEL +#define FMC_FLAG_FALLING_EDGE FSMC_FLAG_FALLING_EDGE +#define FMC_FLAG_FEMPT FSMC_FLAG_FEMPT +/** + * @} + */ + +/** + * @} + */ + +/* Private macro -------------------------------------------------------------*/ +/** @defgroup FSMC_LL_Private_Macros FSMC Private Macros + * @{ + */ + +/** @defgroup FSMC_LL_NOR_Macros FSMC NOR/SRAM Exported Macros + * @brief macros to handle NOR device enable/disable and read/write operations + * @{ + */ +/** + * @brief Enable the NORSRAM device access. + * @param __INSTANCE__ FSMC_NORSRAM Instance + * @param __BANK__ FSMC_NORSRAM Bank + * @retval none + */ +#define __FSMC_NORSRAM_ENABLE(__INSTANCE__, __BANK__) ((__INSTANCE__)->BTCR[(__BANK__)] |= FSMC_BCR1_MBKEN) + +/** + * @brief Disable the NORSRAM device access. + * @param __INSTANCE__ FSMC_NORSRAM Instance + * @param __BANK__ FSMC_NORSRAM Bank + * @retval none + */ +#define __FSMC_NORSRAM_DISABLE(__INSTANCE__, __BANK__) ((__INSTANCE__)->BTCR[(__BANK__)] &= ~FSMC_BCR1_MBKEN) +/** + * @} + */ + +/** @defgroup FSMC_LL_NAND_Macros FSMC NAND Macros + * @brief macros to handle NAND device enable/disable + * @{ + */ +#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) +/** + * @brief Enable the NAND device access. + * @param __INSTANCE__ FSMC_NAND Instance + * @param __BANK__ FSMC_NAND Bank + * @retval none + */ +#define __FSMC_NAND_ENABLE(__INSTANCE__, __BANK__) (((__BANK__) == FSMC_NAND_BANK2)? ((__INSTANCE__)->PCR2 |= FSMC_PCR2_PBKEN): \ + ((__INSTANCE__)->PCR3 |= FSMC_PCR3_PBKEN)) + +/** + * @brief Disable the NAND device access. + * @param __INSTANCE__ FSMC_NAND Instance + * @param __BANK__ FSMC_NAND Bank + * @retval none + */ +#define __FSMC_NAND_DISABLE(__INSTANCE__, __BANK__) (((__BANK__) == FSMC_NAND_BANK2)? ((__INSTANCE__)->PCR2 &= ~FSMC_PCR2_PBKEN): \ + ((__INSTANCE__)->PCR3 &= ~FSMC_PCR3_PBKEN)) +/** + * @} + */ + +/** @defgroup FSMC_LL_PCCARD_Macros FSMC PCCARD Macros + * @brief macros to handle SRAM read/write operations + * @{ + */ +/** + * @brief Enable the PCCARD device access. + * @param __INSTANCE__ FSMC_PCCARD Instance + * @retval none + */ +#define __FSMC_PCCARD_ENABLE(__INSTANCE__) ((__INSTANCE__)->PCR4 |= FSMC_PCR4_PBKEN) + +/** + * @brief Disable the PCCARD device access. + * @param __INSTANCE__ FSMC_PCCARD Instance + * @retval none + */ +#define __FSMC_PCCARD_DISABLE(__INSTANCE__) ((__INSTANCE__)->PCR4 &= ~FSMC_PCR4_PBKEN) +/** + * @} + */ + +/** @defgroup FSMC_LL_Flag_Interrupt_Macros FSMC Flag&Interrupt Macros + * @brief macros to handle FSMC flags and interrupts + * @{ + */ +/** + * @brief Enable the NAND device interrupt. + * @param __INSTANCE__ FSMC_NAND Instance + * @param __BANK__ FSMC_NAND Bank + * @param __INTERRUPT__ FSMC_NAND interrupt + * This parameter can be any combination of the following values: + * @arg FSMC_IT_RISING_EDGE: Interrupt rising edge. + * @arg FSMC_IT_LEVEL: Interrupt level. + * @arg FSMC_IT_FALLING_EDGE: Interrupt falling edge. + * @retval None + */ +#define __FSMC_NAND_ENABLE_IT(__INSTANCE__, __BANK__, __INTERRUPT__) (((__BANK__) == FSMC_NAND_BANK2)? ((__INSTANCE__)->SR2 |= (__INTERRUPT__)): \ + ((__INSTANCE__)->SR3 |= (__INTERRUPT__))) + +/** + * @brief Disable the NAND device interrupt. + * @param __INSTANCE__ FSMC_NAND Instance + * @param __BANK__ FSMC_NAND Bank + * @param __INTERRUPT__ FSMC_NAND interrupt + * This parameter can be any combination of the following values: + * @arg FSMC_IT_RISING_EDGE: Interrupt rising edge. + * @arg FSMC_IT_LEVEL: Interrupt level. + * @arg FSMC_IT_FALLING_EDGE: Interrupt falling edge. + * @retval None + */ +#define __FSMC_NAND_DISABLE_IT(__INSTANCE__, __BANK__, __INTERRUPT__) (((__BANK__) == FSMC_NAND_BANK2)? ((__INSTANCE__)->SR2 &= ~(__INTERRUPT__)): \ + ((__INSTANCE__)->SR3 &= ~(__INTERRUPT__))) + +/** + * @brief Get flag status of the NAND device. + * @param __INSTANCE__ FSMC_NAND Instance + * @param __BANK__ FSMC_NAND Bank + * @param __FLAG__ FSMC_NAND flag + * This parameter can be any combination of the following values: + * @arg FSMC_FLAG_RISING_EDGE: Interrupt rising edge flag. + * @arg FSMC_FLAG_LEVEL: Interrupt level edge flag. + * @arg FSMC_FLAG_FALLING_EDGE: Interrupt falling edge flag. + * @arg FSMC_FLAG_FEMPT: FIFO empty flag. + * @retval The state of FLAG (SET or RESET). + */ +#define __FSMC_NAND_GET_FLAG(__INSTANCE__, __BANK__, __FLAG__) (((__BANK__) == FSMC_NAND_BANK2)? (((__INSTANCE__)->SR2 &(__FLAG__)) == (__FLAG__)): \ + (((__INSTANCE__)->SR3 &(__FLAG__)) == (__FLAG__))) + +/** + * @brief Clear flag status of the NAND device. + * @param __INSTANCE__ FSMC_NAND Instance + * @param __BANK__ FSMC_NAND Bank + * @param __FLAG__ FSMC_NAND flag + * This parameter can be any combination of the following values: + * @arg FSMC_FLAG_RISING_EDGE: Interrupt rising edge flag. + * @arg FSMC_FLAG_LEVEL: Interrupt level edge flag. + * @arg FSMC_FLAG_FALLING_EDGE: Interrupt falling edge flag. + * @arg FSMC_FLAG_FEMPT: FIFO empty flag. + * @retval None + */ +#define __FSMC_NAND_CLEAR_FLAG(__INSTANCE__, __BANK__, __FLAG__) (((__BANK__) == FSMC_NAND_BANK2)? ((__INSTANCE__)->SR2 &= ~(__FLAG__)): \ + ((__INSTANCE__)->SR3 &= ~(__FLAG__))) + +/** + * @brief Enable the PCCARD device interrupt. + * @param __INSTANCE__ FSMC_PCCARD Instance + * @param __INTERRUPT__ FSMC_PCCARD interrupt + * This parameter can be any combination of the following values: + * @arg FSMC_IT_RISING_EDGE: Interrupt rising edge. + * @arg FSMC_IT_LEVEL: Interrupt level. + * @arg FSMC_IT_FALLING_EDGE: Interrupt falling edge. + * @retval None + */ +#define __FSMC_PCCARD_ENABLE_IT(__INSTANCE__, __INTERRUPT__) ((__INSTANCE__)->SR4 |= (__INTERRUPT__)) + +/** + * @brief Disable the PCCARD device interrupt. + * @param __INSTANCE__ FSMC_PCCARD Instance + * @param __INTERRUPT__ FSMC_PCCARD interrupt + * This parameter can be any combination of the following values: + * @arg FSMC_IT_RISING_EDGE: Interrupt rising edge. + * @arg FSMC_IT_LEVEL: Interrupt level. + * @arg FSMC_IT_FALLING_EDGE: Interrupt falling edge. + * @retval None + */ +#define __FSMC_PCCARD_DISABLE_IT(__INSTANCE__, __INTERRUPT__) ((__INSTANCE__)->SR4 &= ~(__INTERRUPT__)) + +/** + * @brief Get flag status of the PCCARD device. + * @param __INSTANCE__ FSMC_PCCARD Instance + * @param __FLAG__ FSMC_PCCARD flag + * This parameter can be any combination of the following values: + * @arg FSMC_FLAG_RISING_EDGE: Interrupt rising edge flag. + * @arg FSMC_FLAG_LEVEL: Interrupt level edge flag. + * @arg FSMC_FLAG_FALLING_EDGE: Interrupt falling edge flag. + * @arg FSMC_FLAG_FEMPT: FIFO empty flag. + * @retval The state of FLAG (SET or RESET). + */ +#define __FSMC_PCCARD_GET_FLAG(__INSTANCE__, __FLAG__) (((__INSTANCE__)->SR4 &(__FLAG__)) == (__FLAG__)) + +/** + * @brief Clear flag status of the PCCARD device. + * @param __INSTANCE__ FSMC_PCCARD Instance + * @param __FLAG__ FSMC_PCCARD flag + * This parameter can be any combination of the following values: + * @arg FSMC_FLAG_RISING_EDGE: Interrupt rising edge flag. + * @arg FSMC_FLAG_LEVEL: Interrupt level edge flag. + * @arg FSMC_FLAG_FALLING_EDGE: Interrupt falling edge flag. + * @arg FSMC_FLAG_FEMPT: FIFO empty flag. + * @retval None + */ +#define __FSMC_PCCARD_CLEAR_FLAG(__INSTANCE__, __FLAG__) ((__INSTANCE__)->SR4 &= ~(__FLAG__)) +/** + * @} + */ +#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx */ + +/** @defgroup FSMC_LL_Assert_Macros FSMC Assert Macros + * @{ + */ +#define IS_FSMC_NORSRAM_BANK(__BANK__) (((__BANK__) == FSMC_NORSRAM_BANK1) || \ + ((__BANK__) == FSMC_NORSRAM_BANK2) || \ + ((__BANK__) == FSMC_NORSRAM_BANK3) || \ + ((__BANK__) == FSMC_NORSRAM_BANK4)) + +#define IS_FSMC_MUX(__MUX__) (((__MUX__) == FSMC_DATA_ADDRESS_MUX_DISABLE) || \ + ((__MUX__) == FSMC_DATA_ADDRESS_MUX_ENABLE)) + +#define IS_FSMC_MEMORY(__MEMORY__) (((__MEMORY__) == FSMC_MEMORY_TYPE_SRAM) || \ + ((__MEMORY__) == FSMC_MEMORY_TYPE_PSRAM)|| \ + ((__MEMORY__) == FSMC_MEMORY_TYPE_NOR)) + +#define IS_FSMC_NORSRAM_MEMORY_WIDTH(__WIDTH__) (((__WIDTH__) == FSMC_NORSRAM_MEM_BUS_WIDTH_8) || \ + ((__WIDTH__) == FSMC_NORSRAM_MEM_BUS_WIDTH_16) || \ + ((__WIDTH__) == FSMC_NORSRAM_MEM_BUS_WIDTH_32)) + +#define IS_FSMC_ACCESS_MODE(__MODE__) (((__MODE__) == FSMC_ACCESS_MODE_A) || \ + ((__MODE__) == FSMC_ACCESS_MODE_B) || \ + ((__MODE__) == FSMC_ACCESS_MODE_C) || \ + ((__MODE__) == FSMC_ACCESS_MODE_D)) + +#define IS_FSMC_NAND_BANK(BANK) (((BANK) == FSMC_NAND_BANK2) || \ + ((BANK) == FSMC_NAND_BANK3)) + +#define IS_FSMC_WAIT_FEATURE(FEATURE) (((FEATURE) == FSMC_NAND_PCC_WAIT_FEATURE_DISABLE) || \ + ((FEATURE) == FSMC_NAND_PCC_WAIT_FEATURE_ENABLE)) + +#define IS_FSMC_NAND_MEMORY_WIDTH(WIDTH) (((WIDTH) == FSMC_NAND_PCC_MEM_BUS_WIDTH_8) || \ + ((WIDTH) == FSMC_NAND_PCC_MEM_BUS_WIDTH_16)) + +#define IS_FSMC_ECC_STATE(STATE) (((STATE) == FSMC_NAND_ECC_DISABLE) || \ + ((STATE) == FSMC_NAND_ECC_ENABLE)) + +#define IS_FSMC_ECCPAGE_SIZE(SIZE) (((SIZE) == FSMC_NAND_ECC_PAGE_SIZE_256BYTE) || \ + ((SIZE) == FSMC_NAND_ECC_PAGE_SIZE_512BYTE) || \ + ((SIZE) == FSMC_NAND_ECC_PAGE_SIZE_1024BYTE) || \ + ((SIZE) == FSMC_NAND_ECC_PAGE_SIZE_2048BYTE) || \ + ((SIZE) == FSMC_NAND_ECC_PAGE_SIZE_4096BYTE) || \ + ((SIZE) == FSMC_NAND_ECC_PAGE_SIZE_8192BYTE)) + +#define IS_FSMC_TCLR_TIME(TIME) ((TIME) <= 255U) + +#define IS_FSMC_TAR_TIME(TIME) ((TIME) <= 255U) + +#define IS_FSMC_SETUP_TIME(TIME) ((TIME) <= 255U) + +#define IS_FSMC_WAIT_TIME(TIME) ((TIME) <= 255U) + +#define IS_FSMC_HOLD_TIME(TIME) ((TIME) <= 255U) + +#define IS_FSMC_HIZ_TIME(TIME) ((TIME) <= 255U) + +#define IS_FSMC_NORSRAM_DEVICE(__INSTANCE__) ((__INSTANCE__) == FSMC_NORSRAM_DEVICE) + +#define IS_FSMC_NORSRAM_EXTENDED_DEVICE(__INSTANCE__) ((__INSTANCE__) == FSMC_NORSRAM_EXTENDED_DEVICE) + +#define IS_FSMC_NAND_DEVICE(INSTANCE) ((INSTANCE) == FSMC_NAND_DEVICE) + +#define IS_FSMC_PCCARD_DEVICE(INSTANCE) ((INSTANCE) == FSMC_PCCARD_DEVICE) + +#define IS_FSMC_BURSTMODE(__STATE__) (((__STATE__) == FSMC_BURST_ACCESS_MODE_DISABLE) || \ + ((__STATE__) == FSMC_BURST_ACCESS_MODE_ENABLE)) + +#define IS_FSMC_WAIT_POLARITY(__POLARITY__) (((__POLARITY__) == FSMC_WAIT_SIGNAL_POLARITY_LOW) || \ + ((__POLARITY__) == FSMC_WAIT_SIGNAL_POLARITY_HIGH)) + +#define IS_FSMC_WRAP_MODE(__MODE__) (((__MODE__) == FSMC_WRAP_MODE_DISABLE) || \ + ((__MODE__) == FSMC_WRAP_MODE_ENABLE)) + +#define IS_FSMC_WAIT_SIGNAL_ACTIVE(__ACTIVE__) (((__ACTIVE__) == FSMC_WAIT_TIMING_BEFORE_WS) || \ + ((__ACTIVE__) == FSMC_WAIT_TIMING_DURING_WS)) + +#define IS_FSMC_WRITE_OPERATION(__OPERATION__) (((__OPERATION__) == FSMC_WRITE_OPERATION_DISABLE) || \ + ((__OPERATION__) == FSMC_WRITE_OPERATION_ENABLE)) + +#define IS_FSMC_WAITE_SIGNAL(__SIGNAL__) (((__SIGNAL__) == FSMC_WAIT_SIGNAL_DISABLE) || \ + ((__SIGNAL__) == FSMC_WAIT_SIGNAL_ENABLE)) + +#define IS_FSMC_EXTENDED_MODE(__MODE__) (((__MODE__) == FSMC_EXTENDED_MODE_DISABLE) || \ + ((__MODE__) == FSMC_EXTENDED_MODE_ENABLE)) + +#define IS_FSMC_ASYNWAIT(__STATE__) (((__STATE__) == FSMC_ASYNCHRONOUS_WAIT_DISABLE) || \ + ((__STATE__) == FSMC_ASYNCHRONOUS_WAIT_ENABLE)) + +#define IS_FSMC_DATA_LATENCY(__LATENCY__) (((__LATENCY__) > 1U) && ((__LATENCY__) <= 17U)) + +#define IS_FSMC_WRITE_BURST(__BURST__) (((__BURST__) == FSMC_WRITE_BURST_DISABLE) || \ + ((__BURST__) == FSMC_WRITE_BURST_ENABLE)) + +#define IS_FSMC_ADDRESS_SETUP_TIME(__TIME__) ((__TIME__) <= 15U) + +#define IS_FSMC_ADDRESS_HOLD_TIME(__TIME__) (((__TIME__) > 0U) && ((__TIME__) <= 15U)) + +#define IS_FSMC_DATASETUP_TIME(__TIME__) (((__TIME__) > 0U) && ((__TIME__) <= 255U)) + +#define IS_FSMC_TURNAROUND_TIME(__TIME__) ((__TIME__) <= 15U) + +#define IS_FSMC_CONTINOUS_CLOCK(CCLOCK) (((CCLOCK) == FSMC_CONTINUOUS_CLOCK_SYNC_ONLY) || \ + ((CCLOCK) == FSMC_CONTINUOUS_CLOCK_SYNC_ASYNC)) + +#define IS_FSMC_CLK_DIV(DIV) (((DIV) > 1U) && ((DIV) <= 16U)) + +#define IS_FSMC_PAGESIZE(SIZE) (((SIZE) == FSMC_PAGE_SIZE_NONE) || \ + ((SIZE) == FSMC_PAGE_SIZE_128) || \ + ((SIZE) == FSMC_PAGE_SIZE_256) || \ + ((SIZE) == FSMC_PAGE_SIZE_512) || \ + ((SIZE) == FSMC_PAGE_SIZE_1024)) + +#define IS_FSMC_WRITE_FIFO(FIFO) (((FIFO) == FSMC_WRITE_FIFO_DISABLE) || \ + ((FIFO) == FSMC_WRITE_FIFO_ENABLE)) + +/** + * @} + */ +/** + * @} + */ + +/* Private functions ---------------------------------------------------------*/ +/** @defgroup FSMC_LL_Private_Functions FSMC LL Private Functions + * @{ + */ + +/** @defgroup FSMC_LL_NORSRAM NOR SRAM + * @{ + */ + +/** @defgroup FSMC_LL_NORSRAM_Private_Functions_Group1 NOR SRAM Initialization/de-initialization functions + * @{ + */ +HAL_StatusTypeDef FSMC_NORSRAM_Init(FSMC_NORSRAM_TypeDef *Device, FSMC_NORSRAM_InitTypeDef *Init); +HAL_StatusTypeDef FSMC_NORSRAM_Timing_Init(FSMC_NORSRAM_TypeDef *Device, FSMC_NORSRAM_TimingTypeDef *Timing, uint32_t Bank); +HAL_StatusTypeDef FSMC_NORSRAM_Extended_Timing_Init(FSMC_NORSRAM_EXTENDED_TypeDef *Device, FSMC_NORSRAM_TimingTypeDef *Timing, uint32_t Bank, uint32_t ExtendedMode); +HAL_StatusTypeDef FSMC_NORSRAM_DeInit(FSMC_NORSRAM_TypeDef *Device, FSMC_NORSRAM_EXTENDED_TypeDef *ExDevice, uint32_t Bank); +/** + * @} + */ + +/** @defgroup FSMC_LL_NORSRAM_Private_Functions_Group2 NOR SRAM Control functions + * @{ + */ +HAL_StatusTypeDef FSMC_NORSRAM_WriteOperation_Enable(FSMC_NORSRAM_TypeDef *Device, uint32_t Bank); +HAL_StatusTypeDef FSMC_NORSRAM_WriteOperation_Disable(FSMC_NORSRAM_TypeDef *Device, uint32_t Bank); +/** + * @} + */ +/** + * @} + */ + +#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) +/** @defgroup FSMC_LL_NAND NAND + * @{ + */ +/** @defgroup FSMC_LL_NAND_Private_Functions_Group1 NAND Initialization/de-initialization functions + * @{ + */ +HAL_StatusTypeDef FSMC_NAND_Init(FSMC_NAND_TypeDef *Device, FSMC_NAND_InitTypeDef *Init); +HAL_StatusTypeDef FSMC_NAND_CommonSpace_Timing_Init(FSMC_NAND_TypeDef *Device, FSMC_NAND_PCC_TimingTypeDef *Timing, uint32_t Bank); +HAL_StatusTypeDef FSMC_NAND_AttributeSpace_Timing_Init(FSMC_NAND_TypeDef *Device, FSMC_NAND_PCC_TimingTypeDef *Timing, uint32_t Bank); +HAL_StatusTypeDef FSMC_NAND_DeInit(FSMC_NAND_TypeDef *Device, uint32_t Bank); +/** + * @} + */ + +/** @defgroup FSMC_LL_NAND_Private_Functions_Group2 NAND Control functions + * @{ + */ +HAL_StatusTypeDef FSMC_NAND_ECC_Enable(FSMC_NAND_TypeDef *Device, uint32_t Bank); +HAL_StatusTypeDef FSMC_NAND_ECC_Disable(FSMC_NAND_TypeDef *Device, uint32_t Bank); +HAL_StatusTypeDef FSMC_NAND_GetECC(FSMC_NAND_TypeDef *Device, uint32_t *ECCval, uint32_t Bank, uint32_t Timeout); +/** + * @} + */ +/** + * @} + */ + +/** @defgroup FSMC_LL_PCCARD PCCARD + * @{ + */ +/** @defgroup FSMC_LL_PCCARD_Private_Functions_Group1 PCCARD Initialization/de-initialization functions + * @{ + */ +HAL_StatusTypeDef FSMC_PCCARD_Init(FSMC_PCCARD_TypeDef *Device, FSMC_PCCARD_InitTypeDef *Init); +HAL_StatusTypeDef FSMC_PCCARD_CommonSpace_Timing_Init(FSMC_PCCARD_TypeDef *Device, FSMC_NAND_PCC_TimingTypeDef *Timing); +HAL_StatusTypeDef FSMC_PCCARD_AttributeSpace_Timing_Init(FSMC_PCCARD_TypeDef *Device, FSMC_NAND_PCC_TimingTypeDef *Timing); +HAL_StatusTypeDef FSMC_PCCARD_IOSpace_Timing_Init(FSMC_PCCARD_TypeDef *Device, FSMC_NAND_PCC_TimingTypeDef *Timing); +HAL_StatusTypeDef FSMC_PCCARD_DeInit(FSMC_PCCARD_TypeDef *Device); +/** + * @} + */ +/** + * @} + */ +#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx */ + +/** + * @} + */ +#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx || STM32F413xx || STM32F423xx */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F4xx_LL_FSMC_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_sdmmc.h b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_sdmmc.h new file mode 100644 index 0000000..60bd564 --- /dev/null +++ b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_sdmmc.h @@ -0,0 +1,1117 @@ +/** + ****************************************************************************** + * @file stm32f4xx_ll_sdmmc.h + * @author MCD Application Team + * @brief Header file of SDMMC HAL module. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2017 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F4xx_LL_SDMMC_H +#define __STM32F4xx_LL_SDMMC_H + +#ifdef __cplusplus + extern "C" { +#endif + +#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) || \ + defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || \ + defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F446xx) || \ + defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || \ + defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx) + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f4xx_hal_def.h" + +/** @addtogroup STM32F4xx_Driver + * @{ + */ + +/** @addtogroup SDMMC_LL + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup SDMMC_LL_Exported_Types SDMMC_LL Exported Types + * @{ + */ + +/** + * @brief SDMMC Configuration Structure definition + */ +typedef struct +{ + uint32_t ClockEdge; /*!< Specifies the clock transition on which the bit capture is made. + This parameter can be a value of @ref SDMMC_LL_Clock_Edge */ + + uint32_t ClockBypass; /*!< Specifies whether the SDMMC Clock divider bypass is + enabled or disabled. + This parameter can be a value of @ref SDMMC_LL_Clock_Bypass */ + + uint32_t ClockPowerSave; /*!< Specifies whether SDMMC Clock output is enabled or + disabled when the bus is idle. + This parameter can be a value of @ref SDMMC_LL_Clock_Power_Save */ + + uint32_t BusWide; /*!< Specifies the SDMMC bus width. + This parameter can be a value of @ref SDMMC_LL_Bus_Wide */ + + uint32_t HardwareFlowControl; /*!< Specifies whether the SDMMC hardware flow control is enabled or disabled. + This parameter can be a value of @ref SDMMC_LL_Hardware_Flow_Control */ + + uint32_t ClockDiv; /*!< Specifies the clock frequency of the SDMMC controller. + This parameter can be a value between Min_Data = 0 and Max_Data = 255 */ + +}SDIO_InitTypeDef; + + +/** + * @brief SDMMC Command Control structure + */ +typedef struct +{ + uint32_t Argument; /*!< Specifies the SDMMC command argument which is sent + to a card as part of a command message. If a command + contains an argument, it must be loaded into this register + before writing the command to the command register. */ + + uint32_t CmdIndex; /*!< Specifies the SDMMC command index. It must be Min_Data = 0 and + Max_Data = 64 */ + + uint32_t Response; /*!< Specifies the SDMMC response type. + This parameter can be a value of @ref SDMMC_LL_Response_Type */ + + uint32_t WaitForInterrupt; /*!< Specifies whether SDMMC wait for interrupt request is + enabled or disabled. + This parameter can be a value of @ref SDMMC_LL_Wait_Interrupt_State */ + + uint32_t CPSM; /*!< Specifies whether SDMMC Command path state machine (CPSM) + is enabled or disabled. + This parameter can be a value of @ref SDMMC_LL_CPSM_State */ +}SDIO_CmdInitTypeDef; + + +/** + * @brief SDMMC Data Control structure + */ +typedef struct +{ + uint32_t DataTimeOut; /*!< Specifies the data timeout period in card bus clock periods. */ + + uint32_t DataLength; /*!< Specifies the number of data bytes to be transferred. */ + + uint32_t DataBlockSize; /*!< Specifies the data block size for block transfer. + This parameter can be a value of @ref SDMMC_LL_Data_Block_Size */ + + uint32_t TransferDir; /*!< Specifies the data transfer direction, whether the transfer + is a read or write. + This parameter can be a value of @ref SDMMC_LL_Transfer_Direction */ + + uint32_t TransferMode; /*!< Specifies whether data transfer is in stream or block mode. + This parameter can be a value of @ref SDMMC_LL_Transfer_Type */ + + uint32_t DPSM; /*!< Specifies whether SDMMC Data path state machine (DPSM) + is enabled or disabled. + This parameter can be a value of @ref SDMMC_LL_DPSM_State */ +}SDIO_DataInitTypeDef; + +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup SDMMC_LL_Exported_Constants SDMMC_LL Exported Constants + * @{ + */ +#define SDMMC_ERROR_NONE 0x00000000U /*!< No error */ +#define SDMMC_ERROR_CMD_CRC_FAIL 0x00000001U /*!< Command response received (but CRC check failed) */ +#define SDMMC_ERROR_DATA_CRC_FAIL 0x00000002U /*!< Data block sent/received (CRC check failed) */ +#define SDMMC_ERROR_CMD_RSP_TIMEOUT 0x00000004U /*!< Command response timeout */ +#define SDMMC_ERROR_DATA_TIMEOUT 0x00000008U /*!< Data timeout */ +#define SDMMC_ERROR_TX_UNDERRUN 0x00000010U /*!< Transmit FIFO underrun */ +#define SDMMC_ERROR_RX_OVERRUN 0x00000020U /*!< Receive FIFO overrun */ +#define SDMMC_ERROR_ADDR_MISALIGNED 0x00000040U /*!< Misaligned address */ +#define SDMMC_ERROR_BLOCK_LEN_ERR 0x00000080U /*!< Transferred block length is not allowed for the card or the + number of transferred bytes does not match the block length */ +#define SDMMC_ERROR_ERASE_SEQ_ERR 0x00000100U /*!< An error in the sequence of erase command occurs */ +#define SDMMC_ERROR_BAD_ERASE_PARAM 0x00000200U /*!< An invalid selection for erase groups */ +#define SDMMC_ERROR_WRITE_PROT_VIOLATION 0x00000400U /*!< Attempt to program a write protect block */ +#define SDMMC_ERROR_LOCK_UNLOCK_FAILED 0x00000800U /*!< Sequence or password error has been detected in unlock + command or if there was an attempt to access a locked card */ +#define SDMMC_ERROR_COM_CRC_FAILED 0x00001000U /*!< CRC check of the previous command failed */ +#define SDMMC_ERROR_ILLEGAL_CMD 0x00002000U /*!< Command is not legal for the card state */ +#define SDMMC_ERROR_CARD_ECC_FAILED 0x00004000U /*!< Card internal ECC was applied but failed to correct the data */ +#define SDMMC_ERROR_CC_ERR 0x00008000U /*!< Internal card controller error */ +#define SDMMC_ERROR_GENERAL_UNKNOWN_ERR 0x00010000U /*!< General or unknown error */ +#define SDMMC_ERROR_STREAM_READ_UNDERRUN 0x00020000U /*!< The card could not sustain data reading in stream rmode */ +#define SDMMC_ERROR_STREAM_WRITE_OVERRUN 0x00040000U /*!< The card could not sustain data programming in stream mode */ +#define SDMMC_ERROR_CID_CSD_OVERWRITE 0x00080000U /*!< CID/CSD overwrite error */ +#define SDMMC_ERROR_WP_ERASE_SKIP 0x00100000U /*!< Only partial address space was erased */ +#define SDMMC_ERROR_CARD_ECC_DISABLED 0x00200000U /*!< Command has been executed without using internal ECC */ +#define SDMMC_ERROR_ERASE_RESET 0x00400000U /*!< Erase sequence was cleared before executing because an out + of erase sequence command was received */ +#define SDMMC_ERROR_AKE_SEQ_ERR 0x00800000U /*!< Error in sequence of authentication */ +#define SDMMC_ERROR_INVALID_VOLTRANGE 0x01000000U /*!< Error in case of invalid voltage range */ +#define SDMMC_ERROR_ADDR_OUT_OF_RANGE 0x02000000U /*!< Error when addressed block is out of range */ +#define SDMMC_ERROR_REQUEST_NOT_APPLICABLE 0x04000000U /*!< Error when command request is not applicable */ +#define SDMMC_ERROR_INVALID_PARAMETER 0x08000000U /*!< the used parameter is not valid */ +#define SDMMC_ERROR_UNSUPPORTED_FEATURE 0x10000000U /*!< Error when feature is not insupported */ +#define SDMMC_ERROR_BUSY 0x20000000U /*!< Error when transfer process is busy */ +#define SDMMC_ERROR_DMA 0x40000000U /*!< Error while DMA transfer */ +#define SDMMC_ERROR_TIMEOUT 0x80000000U /*!< Timeout error */ + +/** + * @brief SDMMC Commands Index + */ +#define SDMMC_CMD_GO_IDLE_STATE ((uint8_t)0) /*!< Resets the SD memory card. */ +#define SDMMC_CMD_SEND_OP_COND ((uint8_t)1) /*!< Sends host capacity support information and activates the card's initialization process. */ +#define SDMMC_CMD_ALL_SEND_CID ((uint8_t)2) /*!< Asks any card connected to the host to send the CID numbers on the CMD line. */ +#define SDMMC_CMD_SET_REL_ADDR ((uint8_t)3) /*!< Asks the card to publish a new relative address (RCA). */ +#define SDMMC_CMD_SET_DSR ((uint8_t)4) /*!< Programs the DSR of all cards. */ +#define SDMMC_CMD_SDMMC_SEN_OP_COND ((uint8_t)5) /*!< Sends host capacity support information (HCS) and asks the accessed card to send its + operating condition register (OCR) content in the response on the CMD line. */ +#define SDMMC_CMD_HS_SWITCH ((uint8_t)6) /*!< Checks switchable function (mode 0) and switch card function (mode 1). */ +#define SDMMC_CMD_SEL_DESEL_CARD ((uint8_t)7) /*!< Selects the card by its own relative address and gets deselected by any other address */ +#define SDMMC_CMD_HS_SEND_EXT_CSD ((uint8_t)8) /*!< Sends SD Memory Card interface condition, which includes host supply voltage information + and asks the card whether card supports voltage. */ +#define SDMMC_CMD_SEND_CSD ((uint8_t)9) /*!< Addressed card sends its card specific data (CSD) on the CMD line. */ +#define SDMMC_CMD_SEND_CID ((uint8_t)10) /*!< Addressed card sends its card identification (CID) on the CMD line. */ +#define SDMMC_CMD_READ_DAT_UNTIL_STOP ((uint8_t)11) /*!< SD card doesn't support it. */ +#define SDMMC_CMD_STOP_TRANSMISSION ((uint8_t)12) /*!< Forces the card to stop transmission. */ +#define SDMMC_CMD_SEND_STATUS ((uint8_t)13) /*!< Addressed card sends its status register. */ +#define SDMMC_CMD_HS_BUSTEST_READ ((uint8_t)14) /*!< Reserved */ +#define SDMMC_CMD_GO_INACTIVE_STATE ((uint8_t)15) /*!< Sends an addressed card into the inactive state. */ +#define SDMMC_CMD_SET_BLOCKLEN ((uint8_t)16) /*!< Sets the block length (in bytes for SDSC) for all following block commands + (read, write, lock). Default block length is fixed to 512 Bytes. Not effective + for SDHS and SDXC. */ +#define SDMMC_CMD_READ_SINGLE_BLOCK ((uint8_t)17) /*!< Reads single block of size selected by SET_BLOCKLEN in case of SDSC, and a block of + fixed 512 bytes in case of SDHC and SDXC. */ +#define SDMMC_CMD_READ_MULT_BLOCK ((uint8_t)18) /*!< Continuously transfers data blocks from card to host until interrupted by + STOP_TRANSMISSION command. */ +#define SDMMC_CMD_HS_BUSTEST_WRITE ((uint8_t)19) /*!< 64 bytes tuning pattern is sent for SDR50 and SDR104. */ +#define SDMMC_CMD_WRITE_DAT_UNTIL_STOP ((uint8_t)20) /*!< Speed class control command. */ +#define SDMMC_CMD_SET_BLOCK_COUNT ((uint8_t)23) /*!< Specify block count for CMD18 and CMD25. */ +#define SDMMC_CMD_WRITE_SINGLE_BLOCK ((uint8_t)24) /*!< Writes single block of size selected by SET_BLOCKLEN in case of SDSC, and a block of + fixed 512 bytes in case of SDHC and SDXC. */ +#define SDMMC_CMD_WRITE_MULT_BLOCK ((uint8_t)25) /*!< Continuously writes blocks of data until a STOP_TRANSMISSION follows. */ +#define SDMMC_CMD_PROG_CID ((uint8_t)26) /*!< Reserved for manufacturers. */ +#define SDMMC_CMD_PROG_CSD ((uint8_t)27) /*!< Programming of the programmable bits of the CSD. */ +#define SDMMC_CMD_SET_WRITE_PROT ((uint8_t)28) /*!< Sets the write protection bit of the addressed group. */ +#define SDMMC_CMD_CLR_WRITE_PROT ((uint8_t)29) /*!< Clears the write protection bit of the addressed group. */ +#define SDMMC_CMD_SEND_WRITE_PROT ((uint8_t)30) /*!< Asks the card to send the status of the write protection bits. */ +#define SDMMC_CMD_SD_ERASE_GRP_START ((uint8_t)32) /*!< Sets the address of the first write block to be erased. (For SD card only). */ +#define SDMMC_CMD_SD_ERASE_GRP_END ((uint8_t)33) /*!< Sets the address of the last write block of the continuous range to be erased. */ +#define SDMMC_CMD_ERASE_GRP_START ((uint8_t)35) /*!< Sets the address of the first write block to be erased. Reserved for each command + system set by switch function command (CMD6). */ +#define SDMMC_CMD_ERASE_GRP_END ((uint8_t)36) /*!< Sets the address of the last write block of the continuous range to be erased. + Reserved for each command system set by switch function command (CMD6). */ +#define SDMMC_CMD_ERASE ((uint8_t)38) /*!< Reserved for SD security applications. */ +#define SDMMC_CMD_FAST_IO ((uint8_t)39) /*!< SD card doesn't support it (Reserved). */ +#define SDMMC_CMD_GO_IRQ_STATE ((uint8_t)40) /*!< SD card doesn't support it (Reserved). */ +#define SDMMC_CMD_LOCK_UNLOCK ((uint8_t)42) /*!< Sets/resets the password or lock/unlock the card. The size of the data block is set by + the SET_BLOCK_LEN command. */ +#define SDMMC_CMD_APP_CMD ((uint8_t)55) /*!< Indicates to the card that the next command is an application specific command rather + than a standard command. */ +#define SDMMC_CMD_GEN_CMD ((uint8_t)56) /*!< Used either to transfer a data block to the card or to get a data block from the card + for general purpose/application specific commands. */ +#define SDMMC_CMD_NO_CMD ((uint8_t)64) /*!< No command */ + +/** + * @brief Following commands are SD Card Specific commands. + * SDMMC_APP_CMD should be sent before sending these commands. + */ +#define SDMMC_CMD_APP_SD_SET_BUSWIDTH ((uint8_t)6) /*!< (ACMD6) Defines the data bus width to be used for data transfer. The allowed data bus + widths are given in SCR register. */ +#define SDMMC_CMD_SD_APP_STATUS ((uint8_t)13) /*!< (ACMD13) Sends the SD status. */ +#define SDMMC_CMD_SD_APP_SEND_NUM_WRITE_BLOCKS ((uint8_t)22) /*!< (ACMD22) Sends the number of the written (without errors) write blocks. Responds with + 32bit+CRC data block. */ +#define SDMMC_CMD_SD_APP_OP_COND ((uint8_t)41) /*!< (ACMD41) Sends host capacity support information (HCS) and asks the accessed card to + send its operating condition register (OCR) content in the response on the CMD line. */ +#define SDMMC_CMD_SD_APP_SET_CLR_CARD_DETECT ((uint8_t)42) /*!< (ACMD42) Connect/Disconnect the 50 KOhm pull-up resistor on CD/DAT3 (pin 1) of the card */ +#define SDMMC_CMD_SD_APP_SEND_SCR ((uint8_t)51) /*!< Reads the SD Configuration Register (SCR). */ +#define SDMMC_CMD_SDMMC_RW_DIRECT ((uint8_t)52) /*!< For SD I/O card only, reserved for security specification. */ +#define SDMMC_CMD_SDMMC_RW_EXTENDED ((uint8_t)53) /*!< For SD I/O card only, reserved for security specification. */ + +/** + * @brief Following commands are SD Card Specific security commands. + * SDMMC_CMD_APP_CMD should be sent before sending these commands. + */ +#define SDMMC_CMD_SD_APP_GET_MKB ((uint8_t)43) +#define SDMMC_CMD_SD_APP_GET_MID ((uint8_t)44) +#define SDMMC_CMD_SD_APP_SET_CER_RN1 ((uint8_t)45) +#define SDMMC_CMD_SD_APP_GET_CER_RN2 ((uint8_t)46) +#define SDMMC_CMD_SD_APP_SET_CER_RES2 ((uint8_t)47) +#define SDMMC_CMD_SD_APP_GET_CER_RES1 ((uint8_t)48) +#define SDMMC_CMD_SD_APP_SECURE_READ_MULTIPLE_BLOCK ((uint8_t)18) +#define SDMMC_CMD_SD_APP_SECURE_WRITE_MULTIPLE_BLOCK ((uint8_t)25) +#define SDMMC_CMD_SD_APP_SECURE_ERASE ((uint8_t)38) +#define SDMMC_CMD_SD_APP_CHANGE_SECURE_AREA ((uint8_t)49) +#define SDMMC_CMD_SD_APP_SECURE_WRITE_MKB ((uint8_t)48) + +/** + * @brief Masks for errors Card Status R1 (OCR Register) + */ +#define SDMMC_OCR_ADDR_OUT_OF_RANGE 0x80000000U +#define SDMMC_OCR_ADDR_MISALIGNED 0x40000000U +#define SDMMC_OCR_BLOCK_LEN_ERR 0x20000000U +#define SDMMC_OCR_ERASE_SEQ_ERR 0x10000000U +#define SDMMC_OCR_BAD_ERASE_PARAM 0x08000000U +#define SDMMC_OCR_WRITE_PROT_VIOLATION 0x04000000U +#define SDMMC_OCR_LOCK_UNLOCK_FAILED 0x01000000U +#define SDMMC_OCR_COM_CRC_FAILED 0x00800000U +#define SDMMC_OCR_ILLEGAL_CMD 0x00400000U +#define SDMMC_OCR_CARD_ECC_FAILED 0x00200000U +#define SDMMC_OCR_CC_ERROR 0x00100000U +#define SDMMC_OCR_GENERAL_UNKNOWN_ERROR 0x00080000U +#define SDMMC_OCR_STREAM_READ_UNDERRUN 0x00040000U +#define SDMMC_OCR_STREAM_WRITE_OVERRUN 0x00020000U +#define SDMMC_OCR_CID_CSD_OVERWRITE 0x00010000U +#define SDMMC_OCR_WP_ERASE_SKIP 0x00008000U +#define SDMMC_OCR_CARD_ECC_DISABLED 0x00004000U +#define SDMMC_OCR_ERASE_RESET 0x00002000U +#define SDMMC_OCR_AKE_SEQ_ERROR 0x00000008U +#define SDMMC_OCR_ERRORBITS 0xFDFFE008U + +/** + * @brief Masks for R6 Response + */ +#define SDMMC_R6_GENERAL_UNKNOWN_ERROR 0x00002000U +#define SDMMC_R6_ILLEGAL_CMD 0x00004000U +#define SDMMC_R6_COM_CRC_FAILED 0x00008000U + +#define SDMMC_VOLTAGE_WINDOW_SD 0x80100000U +#define SDMMC_HIGH_CAPACITY 0x40000000U +#define SDMMC_STD_CAPACITY 0x00000000U +#define SDMMC_CHECK_PATTERN 0x000001AAU + +#define SDMMC_MAX_VOLT_TRIAL 0x0000FFFFU + +#define SDMMC_MAX_TRIAL 0x0000FFFFU + +#define SDMMC_ALLZERO 0x00000000U + +#define SDMMC_WIDE_BUS_SUPPORT 0x00040000U +#define SDMMC_SINGLE_BUS_SUPPORT 0x00010000U +#define SDMMC_CARD_LOCKED 0x02000000U + +#define SDMMC_DATATIMEOUT 0xFFFFFFFFU + +#define SDMMC_0TO7BITS 0x000000FFU +#define SDMMC_8TO15BITS 0x0000FF00U +#define SDMMC_16TO23BITS 0x00FF0000U +#define SDMMC_24TO31BITS 0xFF000000U +#define SDMMC_MAX_DATA_LENGTH 0x01FFFFFFU + +#define SDMMC_HALFFIFO 0x00000008U +#define SDMMC_HALFFIFOBYTES 0x00000020U + +/** + * @brief Command Class supported + */ +#define SDIO_CCCC_ERASE 0x00000020U + +#define SDIO_CMDTIMEOUT 5000U /* Command send and response timeout */ +#define SDIO_MAXERASETIMEOUT 63000U /* Max erase Timeout 63 s */ + + +/** @defgroup SDIO_LL_Clock_Edge Clock Edge + * @{ + */ +#define SDIO_CLOCK_EDGE_RISING 0x00000000U +#define SDIO_CLOCK_EDGE_FALLING SDIO_CLKCR_NEGEDGE + +#define IS_SDIO_CLOCK_EDGE(EDGE) (((EDGE) == SDIO_CLOCK_EDGE_RISING) || \ + ((EDGE) == SDIO_CLOCK_EDGE_FALLING)) +/** + * @} + */ + +/** @defgroup SDIO_LL_Clock_Bypass Clock Bypass + * @{ + */ +#define SDIO_CLOCK_BYPASS_DISABLE 0x00000000U +#define SDIO_CLOCK_BYPASS_ENABLE SDIO_CLKCR_BYPASS + +#define IS_SDIO_CLOCK_BYPASS(BYPASS) (((BYPASS) == SDIO_CLOCK_BYPASS_DISABLE) || \ + ((BYPASS) == SDIO_CLOCK_BYPASS_ENABLE)) +/** + * @} + */ + +/** @defgroup SDIO_LL_Clock_Power_Save Clock Power Saving + * @{ + */ +#define SDIO_CLOCK_POWER_SAVE_DISABLE 0x00000000U +#define SDIO_CLOCK_POWER_SAVE_ENABLE SDIO_CLKCR_PWRSAV + +#define IS_SDIO_CLOCK_POWER_SAVE(SAVE) (((SAVE) == SDIO_CLOCK_POWER_SAVE_DISABLE) || \ + ((SAVE) == SDIO_CLOCK_POWER_SAVE_ENABLE)) +/** + * @} + */ + +/** @defgroup SDIO_LL_Bus_Wide Bus Width + * @{ + */ +#define SDIO_BUS_WIDE_1B 0x00000000U +#define SDIO_BUS_WIDE_4B SDIO_CLKCR_WIDBUS_0 +#define SDIO_BUS_WIDE_8B SDIO_CLKCR_WIDBUS_1 + +#define IS_SDIO_BUS_WIDE(WIDE) (((WIDE) == SDIO_BUS_WIDE_1B) || \ + ((WIDE) == SDIO_BUS_WIDE_4B) || \ + ((WIDE) == SDIO_BUS_WIDE_8B)) +/** + * @} + */ + +/** @defgroup SDIO_LL_Hardware_Flow_Control Hardware Flow Control + * @{ + */ +#define SDIO_HARDWARE_FLOW_CONTROL_DISABLE 0x00000000U +#define SDIO_HARDWARE_FLOW_CONTROL_ENABLE SDIO_CLKCR_HWFC_EN + +#define IS_SDIO_HARDWARE_FLOW_CONTROL(CONTROL) (((CONTROL) == SDIO_HARDWARE_FLOW_CONTROL_DISABLE) || \ + ((CONTROL) == SDIO_HARDWARE_FLOW_CONTROL_ENABLE)) +/** + * @} + */ + +/** @defgroup SDIO_LL_Clock_Division Clock Division + * @{ + */ +#define IS_SDIO_CLKDIV(DIV) ((DIV) <= 0xFFU) +/** + * @} + */ + +/** @defgroup SDIO_LL_Command_Index Command Index + * @{ + */ +#define IS_SDIO_CMD_INDEX(INDEX) ((INDEX) < 0x40U) +/** + * @} + */ + +/** @defgroup SDIO_LL_Response_Type Response Type + * @{ + */ +#define SDIO_RESPONSE_NO 0x00000000U +#define SDIO_RESPONSE_SHORT SDIO_CMD_WAITRESP_0 +#define SDIO_RESPONSE_LONG SDIO_CMD_WAITRESP + +#define IS_SDIO_RESPONSE(RESPONSE) (((RESPONSE) == SDIO_RESPONSE_NO) || \ + ((RESPONSE) == SDIO_RESPONSE_SHORT) || \ + ((RESPONSE) == SDIO_RESPONSE_LONG)) +/** + * @} + */ + +/** @defgroup SDIO_LL_Wait_Interrupt_State Wait Interrupt + * @{ + */ +#define SDIO_WAIT_NO 0x00000000U +#define SDIO_WAIT_IT SDIO_CMD_WAITINT +#define SDIO_WAIT_PEND SDIO_CMD_WAITPEND + +#define IS_SDIO_WAIT(WAIT) (((WAIT) == SDIO_WAIT_NO) || \ + ((WAIT) == SDIO_WAIT_IT) || \ + ((WAIT) == SDIO_WAIT_PEND)) +/** + * @} + */ + +/** @defgroup SDIO_LL_CPSM_State CPSM State + * @{ + */ +#define SDIO_CPSM_DISABLE 0x00000000U +#define SDIO_CPSM_ENABLE SDIO_CMD_CPSMEN + +#define IS_SDIO_CPSM(CPSM) (((CPSM) == SDIO_CPSM_DISABLE) || \ + ((CPSM) == SDIO_CPSM_ENABLE)) +/** + * @} + */ + +/** @defgroup SDIO_LL_Response_Registers Response Register + * @{ + */ +#define SDIO_RESP1 0x00000000U +#define SDIO_RESP2 0x00000004U +#define SDIO_RESP3 0x00000008U +#define SDIO_RESP4 0x0000000CU + +#define IS_SDIO_RESP(RESP) (((RESP) == SDIO_RESP1) || \ + ((RESP) == SDIO_RESP2) || \ + ((RESP) == SDIO_RESP3) || \ + ((RESP) == SDIO_RESP4)) +/** + * @} + */ + +/** @defgroup SDIO_LL_Data_Length Data Lenght + * @{ + */ +#define IS_SDIO_DATA_LENGTH(LENGTH) ((LENGTH) <= 0x01FFFFFFU) +/** + * @} + */ + +/** @defgroup SDIO_LL_Data_Block_Size Data Block Size + * @{ + */ +#define SDIO_DATABLOCK_SIZE_1B 0x00000000U +#define SDIO_DATABLOCK_SIZE_2B SDIO_DCTRL_DBLOCKSIZE_0 +#define SDIO_DATABLOCK_SIZE_4B SDIO_DCTRL_DBLOCKSIZE_1 +#define SDIO_DATABLOCK_SIZE_8B (SDIO_DCTRL_DBLOCKSIZE_0|SDIO_DCTRL_DBLOCKSIZE_1) +#define SDIO_DATABLOCK_SIZE_16B SDIO_DCTRL_DBLOCKSIZE_2 +#define SDIO_DATABLOCK_SIZE_32B (SDIO_DCTRL_DBLOCKSIZE_0|SDIO_DCTRL_DBLOCKSIZE_2) +#define SDIO_DATABLOCK_SIZE_64B (SDIO_DCTRL_DBLOCKSIZE_1|SDIO_DCTRL_DBLOCKSIZE_2) +#define SDIO_DATABLOCK_SIZE_128B (SDIO_DCTRL_DBLOCKSIZE_0|SDIO_DCTRL_DBLOCKSIZE_1|SDIO_DCTRL_DBLOCKSIZE_2) +#define SDIO_DATABLOCK_SIZE_256B SDIO_DCTRL_DBLOCKSIZE_3 +#define SDIO_DATABLOCK_SIZE_512B (SDIO_DCTRL_DBLOCKSIZE_0|SDIO_DCTRL_DBLOCKSIZE_3) +#define SDIO_DATABLOCK_SIZE_1024B (SDIO_DCTRL_DBLOCKSIZE_1|SDIO_DCTRL_DBLOCKSIZE_3) +#define SDIO_DATABLOCK_SIZE_2048B (SDIO_DCTRL_DBLOCKSIZE_0|SDIO_DCTRL_DBLOCKSIZE_1|SDIO_DCTRL_DBLOCKSIZE_3) +#define SDIO_DATABLOCK_SIZE_4096B (SDIO_DCTRL_DBLOCKSIZE_2|SDIO_DCTRL_DBLOCKSIZE_3) +#define SDIO_DATABLOCK_SIZE_8192B (SDIO_DCTRL_DBLOCKSIZE_0|SDIO_DCTRL_DBLOCKSIZE_2|SDIO_DCTRL_DBLOCKSIZE_3) +#define SDIO_DATABLOCK_SIZE_16384B (SDIO_DCTRL_DBLOCKSIZE_1|SDIO_DCTRL_DBLOCKSIZE_2|SDIO_DCTRL_DBLOCKSIZE_3) + +#define IS_SDIO_BLOCK_SIZE(SIZE) (((SIZE) == SDIO_DATABLOCK_SIZE_1B) || \ + ((SIZE) == SDIO_DATABLOCK_SIZE_2B) || \ + ((SIZE) == SDIO_DATABLOCK_SIZE_4B) || \ + ((SIZE) == SDIO_DATABLOCK_SIZE_8B) || \ + ((SIZE) == SDIO_DATABLOCK_SIZE_16B) || \ + ((SIZE) == SDIO_DATABLOCK_SIZE_32B) || \ + ((SIZE) == SDIO_DATABLOCK_SIZE_64B) || \ + ((SIZE) == SDIO_DATABLOCK_SIZE_128B) || \ + ((SIZE) == SDIO_DATABLOCK_SIZE_256B) || \ + ((SIZE) == SDIO_DATABLOCK_SIZE_512B) || \ + ((SIZE) == SDIO_DATABLOCK_SIZE_1024B) || \ + ((SIZE) == SDIO_DATABLOCK_SIZE_2048B) || \ + ((SIZE) == SDIO_DATABLOCK_SIZE_4096B) || \ + ((SIZE) == SDIO_DATABLOCK_SIZE_8192B) || \ + ((SIZE) == SDIO_DATABLOCK_SIZE_16384B)) +/** + * @} + */ + +/** @defgroup SDIO_LL_Transfer_Direction Transfer Direction + * @{ + */ +#define SDIO_TRANSFER_DIR_TO_CARD 0x00000000U +#define SDIO_TRANSFER_DIR_TO_SDIO SDIO_DCTRL_DTDIR + +#define IS_SDIO_TRANSFER_DIR(DIR) (((DIR) == SDIO_TRANSFER_DIR_TO_CARD) || \ + ((DIR) == SDIO_TRANSFER_DIR_TO_SDIO)) +/** + * @} + */ + +/** @defgroup SDIO_LL_Transfer_Type Transfer Type + * @{ + */ +#define SDIO_TRANSFER_MODE_BLOCK 0x00000000U +#define SDIO_TRANSFER_MODE_STREAM SDIO_DCTRL_DTMODE + +#define IS_SDIO_TRANSFER_MODE(MODE) (((MODE) == SDIO_TRANSFER_MODE_BLOCK) || \ + ((MODE) == SDIO_TRANSFER_MODE_STREAM)) +/** + * @} + */ + +/** @defgroup SDIO_LL_DPSM_State DPSM State + * @{ + */ +#define SDIO_DPSM_DISABLE 0x00000000U +#define SDIO_DPSM_ENABLE SDIO_DCTRL_DTEN + +#define IS_SDIO_DPSM(DPSM) (((DPSM) == SDIO_DPSM_DISABLE) ||\ + ((DPSM) == SDIO_DPSM_ENABLE)) +/** + * @} + */ + +/** @defgroup SDIO_LL_Read_Wait_Mode Read Wait Mode + * @{ + */ +#define SDIO_READ_WAIT_MODE_DATA2 0x00000000U +#define SDIO_READ_WAIT_MODE_CLK (SDIO_DCTRL_RWMOD) + +#define IS_SDIO_READWAIT_MODE(MODE) (((MODE) == SDIO_READ_WAIT_MODE_CLK) || \ + ((MODE) == SDIO_READ_WAIT_MODE_DATA2)) +/** + * @} + */ + +/** @defgroup SDIO_LL_Interrupt_sources Interrupt Sources + * @{ + */ +#define SDIO_IT_CCRCFAIL SDIO_STA_CCRCFAIL +#define SDIO_IT_DCRCFAIL SDIO_STA_DCRCFAIL +#define SDIO_IT_CTIMEOUT SDIO_STA_CTIMEOUT +#define SDIO_IT_DTIMEOUT SDIO_STA_DTIMEOUT +#define SDIO_IT_TXUNDERR SDIO_STA_TXUNDERR +#define SDIO_IT_RXOVERR SDIO_STA_RXOVERR +#define SDIO_IT_CMDREND SDIO_STA_CMDREND +#define SDIO_IT_CMDSENT SDIO_STA_CMDSENT +#define SDIO_IT_DATAEND SDIO_STA_DATAEND +#define SDIO_IT_STBITERR SDIO_STA_STBITERR +#define SDIO_IT_DBCKEND SDIO_STA_DBCKEND +#define SDIO_IT_CMDACT SDIO_STA_CMDACT +#define SDIO_IT_TXACT SDIO_STA_TXACT +#define SDIO_IT_RXACT SDIO_STA_RXACT +#define SDIO_IT_TXFIFOHE SDIO_STA_TXFIFOHE +#define SDIO_IT_RXFIFOHF SDIO_STA_RXFIFOHF +#define SDIO_IT_TXFIFOF SDIO_STA_TXFIFOF +#define SDIO_IT_RXFIFOF SDIO_STA_RXFIFOF +#define SDIO_IT_TXFIFOE SDIO_STA_TXFIFOE +#define SDIO_IT_RXFIFOE SDIO_STA_RXFIFOE +#define SDIO_IT_TXDAVL SDIO_STA_TXDAVL +#define SDIO_IT_RXDAVL SDIO_STA_RXDAVL +#define SDIO_IT_SDIOIT SDIO_STA_SDIOIT +#define SDIO_IT_CEATAEND SDIO_STA_CEATAEND +/** + * @} + */ + +/** @defgroup SDIO_LL_Flags Flags + * @{ + */ +#define SDIO_FLAG_CCRCFAIL SDIO_STA_CCRCFAIL +#define SDIO_FLAG_DCRCFAIL SDIO_STA_DCRCFAIL +#define SDIO_FLAG_CTIMEOUT SDIO_STA_CTIMEOUT +#define SDIO_FLAG_DTIMEOUT SDIO_STA_DTIMEOUT +#define SDIO_FLAG_TXUNDERR SDIO_STA_TXUNDERR +#define SDIO_FLAG_RXOVERR SDIO_STA_RXOVERR +#define SDIO_FLAG_CMDREND SDIO_STA_CMDREND +#define SDIO_FLAG_CMDSENT SDIO_STA_CMDSENT +#define SDIO_FLAG_DATAEND SDIO_STA_DATAEND +#define SDIO_FLAG_STBITERR SDIO_STA_STBITERR +#define SDIO_FLAG_DBCKEND SDIO_STA_DBCKEND +#define SDIO_FLAG_CMDACT SDIO_STA_CMDACT +#define SDIO_FLAG_TXACT SDIO_STA_TXACT +#define SDIO_FLAG_RXACT SDIO_STA_RXACT +#define SDIO_FLAG_TXFIFOHE SDIO_STA_TXFIFOHE +#define SDIO_FLAG_RXFIFOHF SDIO_STA_RXFIFOHF +#define SDIO_FLAG_TXFIFOF SDIO_STA_TXFIFOF +#define SDIO_FLAG_RXFIFOF SDIO_STA_RXFIFOF +#define SDIO_FLAG_TXFIFOE SDIO_STA_TXFIFOE +#define SDIO_FLAG_RXFIFOE SDIO_STA_RXFIFOE +#define SDIO_FLAG_TXDAVL SDIO_STA_TXDAVL +#define SDIO_FLAG_RXDAVL SDIO_STA_RXDAVL +#define SDIO_FLAG_SDIOIT SDIO_STA_SDIOIT +#define SDIO_FLAG_CEATAEND SDIO_STA_CEATAEND +#define SDIO_STATIC_FLAGS ((uint32_t)(SDIO_FLAG_CCRCFAIL | SDIO_FLAG_DCRCFAIL | SDIO_FLAG_CTIMEOUT |\ + SDIO_FLAG_DTIMEOUT | SDIO_FLAG_TXUNDERR | SDIO_FLAG_RXOVERR |\ + SDIO_FLAG_CMDREND | SDIO_FLAG_CMDSENT | SDIO_FLAG_DATAEND |\ + SDIO_FLAG_DBCKEND)) +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup SDIO_LL_Exported_macros SDIO_LL Exported Macros + * @{ + */ + +/** @defgroup SDMMC_LL_Alias_Region Bit Address in the alias region + * @{ + */ +/* ------------ SDIO registers bit address in the alias region -------------- */ +#define SDIO_OFFSET (SDIO_BASE - PERIPH_BASE) + +/* --- CLKCR Register ---*/ +/* Alias word address of CLKEN bit */ +#define CLKCR_OFFSET (SDIO_OFFSET + 0x04U) +#define CLKEN_BITNUMBER 0x08U +#define CLKCR_CLKEN_BB (PERIPH_BB_BASE + (CLKCR_OFFSET * 32U) + (CLKEN_BITNUMBER * 4U)) + +/* --- CMD Register ---*/ +/* Alias word address of SDIOSUSPEND bit */ +#define CMD_OFFSET (SDIO_OFFSET + 0x0CU) +#define SDIOSUSPEND_BITNUMBER 0x0BU +#define CMD_SDIOSUSPEND_BB (PERIPH_BB_BASE + (CMD_OFFSET * 32U) + (SDIOSUSPEND_BITNUMBER * 4U)) + +/* Alias word address of ENCMDCOMPL bit */ +#define ENCMDCOMPL_BITNUMBER 0x0CU +#define CMD_ENCMDCOMPL_BB (PERIPH_BB_BASE + (CMD_OFFSET * 32U) + (ENCMDCOMPL_BITNUMBER * 4U)) + +/* Alias word address of NIEN bit */ +#define NIEN_BITNUMBER 0x0DU +#define CMD_NIEN_BB (PERIPH_BB_BASE + (CMD_OFFSET * 32U) + (NIEN_BITNUMBER * 4U)) + +/* Alias word address of ATACMD bit */ +#define ATACMD_BITNUMBER 0x0EU +#define CMD_ATACMD_BB (PERIPH_BB_BASE + (CMD_OFFSET * 32U) + (ATACMD_BITNUMBER * 4U)) + +/* --- DCTRL Register ---*/ +/* Alias word address of DMAEN bit */ +#define DCTRL_OFFSET (SDIO_OFFSET + 0x2CU) +#define DMAEN_BITNUMBER 0x03U +#define DCTRL_DMAEN_BB (PERIPH_BB_BASE + (DCTRL_OFFSET * 32U) + (DMAEN_BITNUMBER * 4U)) + +/* Alias word address of RWSTART bit */ +#define RWSTART_BITNUMBER 0x08U +#define DCTRL_RWSTART_BB (PERIPH_BB_BASE + (DCTRL_OFFSET * 32U) + (RWSTART_BITNUMBER * 4U)) + +/* Alias word address of RWSTOP bit */ +#define RWSTOP_BITNUMBER 0x09U +#define DCTRL_RWSTOP_BB (PERIPH_BB_BASE + (DCTRL_OFFSET * 32U) + (RWSTOP_BITNUMBER * 4U)) + +/* Alias word address of RWMOD bit */ +#define RWMOD_BITNUMBER 0x0AU +#define DCTRL_RWMOD_BB (PERIPH_BB_BASE + (DCTRL_OFFSET * 32U) + (RWMOD_BITNUMBER * 4U)) + +/* Alias word address of SDIOEN bit */ +#define SDIOEN_BITNUMBER 0x0BU +#define DCTRL_SDIOEN_BB (PERIPH_BB_BASE + (DCTRL_OFFSET * 32U) + (SDIOEN_BITNUMBER * 4U)) +/** + * @} + */ + +/** @defgroup SDIO_LL_Register Bits And Addresses Definitions + * @brief SDIO_LL registers bit address in the alias region + * @{ + */ +/* ---------------------- SDIO registers bit mask --------------------------- */ +/* --- CLKCR Register ---*/ +/* CLKCR register clear mask */ +#define CLKCR_CLEAR_MASK ((uint32_t)(SDIO_CLKCR_CLKDIV | SDIO_CLKCR_PWRSAV |\ + SDIO_CLKCR_BYPASS | SDIO_CLKCR_WIDBUS |\ + SDIO_CLKCR_NEGEDGE | SDIO_CLKCR_HWFC_EN)) + +/* --- DCTRL Register ---*/ +/* SDIO DCTRL Clear Mask */ +#define DCTRL_CLEAR_MASK ((uint32_t)(SDIO_DCTRL_DTEN | SDIO_DCTRL_DTDIR |\ + SDIO_DCTRL_DTMODE | SDIO_DCTRL_DBLOCKSIZE)) + +/* --- CMD Register ---*/ +/* CMD Register clear mask */ +#define CMD_CLEAR_MASK ((uint32_t)(SDIO_CMD_CMDINDEX | SDIO_CMD_WAITRESP |\ + SDIO_CMD_WAITINT | SDIO_CMD_WAITPEND |\ + SDIO_CMD_CPSMEN | SDIO_CMD_SDIOSUSPEND)) + +/* SDIO Initialization Frequency (400KHz max) */ +#define SDIO_INIT_CLK_DIV ((uint8_t)0x76) + +/* SDIO Data Transfer Frequency (25MHz max) */ +#define SDIO_TRANSFER_CLK_DIV ((uint8_t)0x0) + +/** + * @} + */ + +/** @defgroup SDIO_LL_Interrupt_Clock Interrupt And Clock Configuration + * @brief macros to handle interrupts and specific clock configurations + * @{ + */ + +/** + * @brief Enable the SDIO device. + * @param __INSTANCE__ SDIO Instance + * @retval None + */ +#define __SDIO_ENABLE(__INSTANCE__) (*(__IO uint32_t *)CLKCR_CLKEN_BB = ENABLE) + +/** + * @brief Disable the SDIO device. + * @param __INSTANCE__ SDIO Instance + * @retval None + */ +#define __SDIO_DISABLE(__INSTANCE__) (*(__IO uint32_t *)CLKCR_CLKEN_BB = DISABLE) + +/** + * @brief Enable the SDIO DMA transfer. + * @param __INSTANCE__ SDIO Instance + * @retval None + */ +#define __SDIO_DMA_ENABLE(__INSTANCE__) (*(__IO uint32_t *)DCTRL_DMAEN_BB = ENABLE) +/** + * @brief Disable the SDIO DMA transfer. + * @param __INSTANCE__ SDIO Instance + * @retval None + */ +#define __SDIO_DMA_DISABLE(__INSTANCE__) (*(__IO uint32_t *)DCTRL_DMAEN_BB = DISABLE) + +/** + * @brief Enable the SDIO device interrupt. + * @param __INSTANCE__ Pointer to SDIO register base + * @param __INTERRUPT__ specifies the SDIO interrupt sources to be enabled. + * This parameter can be one or a combination of the following values: + * @arg SDIO_IT_CCRCFAIL: Command response received (CRC check failed) interrupt + * @arg SDIO_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt + * @arg SDIO_IT_CTIMEOUT: Command response timeout interrupt + * @arg SDIO_IT_DTIMEOUT: Data timeout interrupt + * @arg SDIO_IT_TXUNDERR: Transmit FIFO underrun error interrupt + * @arg SDIO_IT_RXOVERR: Received FIFO overrun error interrupt + * @arg SDIO_IT_CMDREND: Command response received (CRC check passed) interrupt + * @arg SDIO_IT_CMDSENT: Command sent (no response required) interrupt + * @arg SDIO_IT_DATAEND: Data end (data counter, SDIDCOUNT, is zero) interrupt + * @arg SDIO_IT_DBCKEND: Data block sent/received (CRC check passed) interrupt + * @arg SDIO_IT_CMDACT: Command transfer in progress interrupt + * @arg SDIO_IT_TXACT: Data transmit in progress interrupt + * @arg SDIO_IT_RXACT: Data receive in progress interrupt + * @arg SDIO_IT_TXFIFOHE: Transmit FIFO Half Empty interrupt + * @arg SDIO_IT_RXFIFOHF: Receive FIFO Half Full interrupt + * @arg SDIO_IT_TXFIFOF: Transmit FIFO full interrupt + * @arg SDIO_IT_RXFIFOF: Receive FIFO full interrupt + * @arg SDIO_IT_TXFIFOE: Transmit FIFO empty interrupt + * @arg SDIO_IT_RXFIFOE: Receive FIFO empty interrupt + * @arg SDIO_IT_TXDAVL: Data available in transmit FIFO interrupt + * @arg SDIO_IT_RXDAVL: Data available in receive FIFO interrupt + * @arg SDIO_IT_SDIOIT: SD I/O interrupt received interrupt + * @retval None + */ +#define __SDIO_ENABLE_IT(__INSTANCE__, __INTERRUPT__) ((__INSTANCE__)->MASK |= (__INTERRUPT__)) + +/** + * @brief Disable the SDIO device interrupt. + * @param __INSTANCE__ Pointer to SDIO register base + * @param __INTERRUPT__ specifies the SDIO interrupt sources to be disabled. + * This parameter can be one or a combination of the following values: + * @arg SDIO_IT_CCRCFAIL: Command response received (CRC check failed) interrupt + * @arg SDIO_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt + * @arg SDIO_IT_CTIMEOUT: Command response timeout interrupt + * @arg SDIO_IT_DTIMEOUT: Data timeout interrupt + * @arg SDIO_IT_TXUNDERR: Transmit FIFO underrun error interrupt + * @arg SDIO_IT_RXOVERR: Received FIFO overrun error interrupt + * @arg SDIO_IT_CMDREND: Command response received (CRC check passed) interrupt + * @arg SDIO_IT_CMDSENT: Command sent (no response required) interrupt + * @arg SDIO_IT_DATAEND: Data end (data counter, SDIDCOUNT, is zero) interrupt + * @arg SDIO_IT_DBCKEND: Data block sent/received (CRC check passed) interrupt + * @arg SDIO_IT_CMDACT: Command transfer in progress interrupt + * @arg SDIO_IT_TXACT: Data transmit in progress interrupt + * @arg SDIO_IT_RXACT: Data receive in progress interrupt + * @arg SDIO_IT_TXFIFOHE: Transmit FIFO Half Empty interrupt + * @arg SDIO_IT_RXFIFOHF: Receive FIFO Half Full interrupt + * @arg SDIO_IT_TXFIFOF: Transmit FIFO full interrupt + * @arg SDIO_IT_RXFIFOF: Receive FIFO full interrupt + * @arg SDIO_IT_TXFIFOE: Transmit FIFO empty interrupt + * @arg SDIO_IT_RXFIFOE: Receive FIFO empty interrupt + * @arg SDIO_IT_TXDAVL: Data available in transmit FIFO interrupt + * @arg SDIO_IT_RXDAVL: Data available in receive FIFO interrupt + * @arg SDIO_IT_SDIOIT: SD I/O interrupt received interrupt + * @retval None + */ +#define __SDIO_DISABLE_IT(__INSTANCE__, __INTERRUPT__) ((__INSTANCE__)->MASK &= ~(__INTERRUPT__)) + +/** + * @brief Checks whether the specified SDIO flag is set or not. + * @param __INSTANCE__ Pointer to SDIO register base + * @param __FLAG__ specifies the flag to check. + * This parameter can be one of the following values: + * @arg SDIO_FLAG_CCRCFAIL: Command response received (CRC check failed) + * @arg SDIO_FLAG_DCRCFAIL: Data block sent/received (CRC check failed) + * @arg SDIO_FLAG_CTIMEOUT: Command response timeout + * @arg SDIO_FLAG_DTIMEOUT: Data timeout + * @arg SDIO_FLAG_TXUNDERR: Transmit FIFO underrun error + * @arg SDIO_FLAG_RXOVERR: Received FIFO overrun error + * @arg SDIO_FLAG_CMDREND: Command response received (CRC check passed) + * @arg SDIO_FLAG_CMDSENT: Command sent (no response required) + * @arg SDIO_FLAG_DATAEND: Data end (data counter, SDIDCOUNT, is zero) + * @arg SDIO_FLAG_DBCKEND: Data block sent/received (CRC check passed) + * @arg SDIO_FLAG_CMDACT: Command transfer in progress + * @arg SDIO_FLAG_TXACT: Data transmit in progress + * @arg SDIO_FLAG_RXACT: Data receive in progress + * @arg SDIO_FLAG_TXFIFOHE: Transmit FIFO Half Empty + * @arg SDIO_FLAG_RXFIFOHF: Receive FIFO Half Full + * @arg SDIO_FLAG_TXFIFOF: Transmit FIFO full + * @arg SDIO_FLAG_RXFIFOF: Receive FIFO full + * @arg SDIO_FLAG_TXFIFOE: Transmit FIFO empty + * @arg SDIO_FLAG_RXFIFOE: Receive FIFO empty + * @arg SDIO_FLAG_TXDAVL: Data available in transmit FIFO + * @arg SDIO_FLAG_RXDAVL: Data available in receive FIFO + * @arg SDIO_FLAG_SDIOIT: SD I/O interrupt received + * @retval The new state of SDIO_FLAG (SET or RESET). + */ +#define __SDIO_GET_FLAG(__INSTANCE__, __FLAG__) (((__INSTANCE__)->STA &(__FLAG__)) != RESET) + + +/** + * @brief Clears the SDIO pending flags. + * @param __INSTANCE__ Pointer to SDIO register base + * @param __FLAG__ specifies the flag to clear. + * This parameter can be one or a combination of the following values: + * @arg SDIO_FLAG_CCRCFAIL: Command response received (CRC check failed) + * @arg SDIO_FLAG_DCRCFAIL: Data block sent/received (CRC check failed) + * @arg SDIO_FLAG_CTIMEOUT: Command response timeout + * @arg SDIO_FLAG_DTIMEOUT: Data timeout + * @arg SDIO_FLAG_TXUNDERR: Transmit FIFO underrun error + * @arg SDIO_FLAG_RXOVERR: Received FIFO overrun error + * @arg SDIO_FLAG_CMDREND: Command response received (CRC check passed) + * @arg SDIO_FLAG_CMDSENT: Command sent (no response required) + * @arg SDIO_FLAG_DATAEND: Data end (data counter, SDIDCOUNT, is zero) + * @arg SDIO_FLAG_DBCKEND: Data block sent/received (CRC check passed) + * @arg SDIO_FLAG_SDIOIT: SD I/O interrupt received + * @retval None + */ +#define __SDIO_CLEAR_FLAG(__INSTANCE__, __FLAG__) ((__INSTANCE__)->ICR = (__FLAG__)) + +/** + * @brief Checks whether the specified SDIO interrupt has occurred or not. + * @param __INSTANCE__ Pointer to SDIO register base + * @param __INTERRUPT__ specifies the SDIO interrupt source to check. + * This parameter can be one of the following values: + * @arg SDIO_IT_CCRCFAIL: Command response received (CRC check failed) interrupt + * @arg SDIO_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt + * @arg SDIO_IT_CTIMEOUT: Command response timeout interrupt + * @arg SDIO_IT_DTIMEOUT: Data timeout interrupt + * @arg SDIO_IT_TXUNDERR: Transmit FIFO underrun error interrupt + * @arg SDIO_IT_RXOVERR: Received FIFO overrun error interrupt + * @arg SDIO_IT_CMDREND: Command response received (CRC check passed) interrupt + * @arg SDIO_IT_CMDSENT: Command sent (no response required) interrupt + * @arg SDIO_IT_DATAEND: Data end (data counter, SDIDCOUNT, is zero) interrupt + * @arg SDIO_IT_DBCKEND: Data block sent/received (CRC check passed) interrupt + * @arg SDIO_IT_CMDACT: Command transfer in progress interrupt + * @arg SDIO_IT_TXACT: Data transmit in progress interrupt + * @arg SDIO_IT_RXACT: Data receive in progress interrupt + * @arg SDIO_IT_TXFIFOHE: Transmit FIFO Half Empty interrupt + * @arg SDIO_IT_RXFIFOHF: Receive FIFO Half Full interrupt + * @arg SDIO_IT_TXFIFOF: Transmit FIFO full interrupt + * @arg SDIO_IT_RXFIFOF: Receive FIFO full interrupt + * @arg SDIO_IT_TXFIFOE: Transmit FIFO empty interrupt + * @arg SDIO_IT_RXFIFOE: Receive FIFO empty interrupt + * @arg SDIO_IT_TXDAVL: Data available in transmit FIFO interrupt + * @arg SDIO_IT_RXDAVL: Data available in receive FIFO interrupt + * @arg SDIO_IT_SDIOIT: SD I/O interrupt received interrupt + * @retval The new state of SDIO_IT (SET or RESET). + */ +#define __SDIO_GET_IT (__INSTANCE__, __INTERRUPT__) (((__INSTANCE__)->STA &(__INTERRUPT__)) == (__INTERRUPT__)) + +/** + * @brief Clears the SDIO's interrupt pending bits. + * @param __INSTANCE__ Pointer to SDIO register base + * @param __INTERRUPT__ specifies the interrupt pending bit to clear. + * This parameter can be one or a combination of the following values: + * @arg SDIO_IT_CCRCFAIL: Command response received (CRC check failed) interrupt + * @arg SDIO_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt + * @arg SDIO_IT_CTIMEOUT: Command response timeout interrupt + * @arg SDIO_IT_DTIMEOUT: Data timeout interrupt + * @arg SDIO_IT_TXUNDERR: Transmit FIFO underrun error interrupt + * @arg SDIO_IT_RXOVERR: Received FIFO overrun error interrupt + * @arg SDIO_IT_CMDREND: Command response received (CRC check passed) interrupt + * @arg SDIO_IT_CMDSENT: Command sent (no response required) interrupt + * @arg SDIO_IT_DATAEND: Data end (data counter, SDIO_DCOUNT, is zero) interrupt + * @arg SDIO_IT_SDIOIT: SD I/O interrupt received interrupt + * @retval None + */ +#define __SDIO_CLEAR_IT(__INSTANCE__, __INTERRUPT__) ((__INSTANCE__)->ICR = (__INTERRUPT__)) + +/** + * @brief Enable Start the SD I/O Read Wait operation. + * @param __INSTANCE__ Pointer to SDIO register base + * @retval None + */ +#define __SDIO_START_READWAIT_ENABLE(__INSTANCE__) (*(__IO uint32_t *) DCTRL_RWSTART_BB = ENABLE) + +/** + * @brief Disable Start the SD I/O Read Wait operations. + * @param __INSTANCE__ Pointer to SDIO register base + * @retval None + */ +#define __SDIO_START_READWAIT_DISABLE(__INSTANCE__) (*(__IO uint32_t *) DCTRL_RWSTART_BB = DISABLE) + +/** + * @brief Enable Start the SD I/O Read Wait operation. + * @param __INSTANCE__ Pointer to SDIO register base + * @retval None + */ +#define __SDIO_STOP_READWAIT_ENABLE(__INSTANCE__) (*(__IO uint32_t *) DCTRL_RWSTOP_BB = ENABLE) + +/** + * @brief Disable Stop the SD I/O Read Wait operations. + * @param __INSTANCE__ Pointer to SDIO register base + * @retval None + */ +#define __SDIO_STOP_READWAIT_DISABLE(__INSTANCE__) (*(__IO uint32_t *) DCTRL_RWSTOP_BB = DISABLE) + +/** + * @brief Enable the SD I/O Mode Operation. + * @param __INSTANCE__ Pointer to SDIO register base + * @retval None + */ +#define __SDIO_OPERATION_ENABLE(__INSTANCE__) (*(__IO uint32_t *) DCTRL_SDIOEN_BB = ENABLE) + +/** + * @brief Disable the SD I/O Mode Operation. + * @param __INSTANCE__ Pointer to SDIO register base + * @retval None + */ +#define __SDIO_OPERATION_DISABLE(__INSTANCE__) (*(__IO uint32_t *) DCTRL_SDIOEN_BB = DISABLE) + +/** + * @brief Enable the SD I/O Suspend command sending. + * @param __INSTANCE__ Pointer to SDIO register base + * @retval None + */ +#define __SDIO_SUSPEND_CMD_ENABLE(__INSTANCE__) (*(__IO uint32_t *) CMD_SDIOSUSPEND_BB = ENABLE) + +/** + * @brief Disable the SD I/O Suspend command sending. + * @param __INSTANCE__ Pointer to SDIO register base + * @retval None + */ +#define __SDIO_SUSPEND_CMD_DISABLE(__INSTANCE__) (*(__IO uint32_t *) CMD_SDIOSUSPEND_BB = DISABLE) + +#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) ||\ + defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\ + defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) +/** + * @brief Enable the command completion signal. + * @retval None + */ +#define __SDIO_CEATA_CMD_COMPLETION_ENABLE() (*(__IO uint32_t *) CMD_ENCMDCOMPL_BB = ENABLE) + +/** + * @brief Disable the command completion signal. + * @retval None + */ +#define __SDIO_CEATA_CMD_COMPLETION_DISABLE() (*(__IO uint32_t *) CMD_ENCMDCOMPL_BB = DISABLE) + +/** + * @brief Enable the CE-ATA interrupt. + * @retval None + */ +#define __SDIO_CEATA_ENABLE_IT() (*(__IO uint32_t *) CMD_NIEN_BB = (uint32_t)0U) + +/** + * @brief Disable the CE-ATA interrupt. + * @retval None + */ +#define __SDIO_CEATA_DISABLE_IT() (*(__IO uint32_t *) CMD_NIEN_BB = (uint32_t)1U) + +/** + * @brief Enable send CE-ATA command (CMD61). + * @retval None + */ +#define __SDIO_CEATA_SENDCMD_ENABLE() (*(__IO uint32_t *) CMD_ATACMD_BB = ENABLE) + +/** + * @brief Disable send CE-ATA command (CMD61). + * @retval None + */ +#define __SDIO_CEATA_SENDCMD_DISABLE() (*(__IO uint32_t *) CMD_ATACMD_BB = DISABLE) +#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F401xC || STM32F401xE || STM32F411xE ||\ + STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */ + +/** + * @} + */ + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup SDMMC_LL_Exported_Functions + * @{ + */ + +/* Initialization/de-initialization functions **********************************/ +/** @addtogroup HAL_SDMMC_LL_Group1 + * @{ + */ +HAL_StatusTypeDef SDIO_Init(SDIO_TypeDef *SDIOx, SDIO_InitTypeDef Init); +/** + * @} + */ + +/* I/O operation functions *****************************************************/ +/** @addtogroup HAL_SDMMC_LL_Group2 + * @{ + */ +uint32_t SDIO_ReadFIFO(SDIO_TypeDef *SDIOx); +HAL_StatusTypeDef SDIO_WriteFIFO(SDIO_TypeDef *SDIOx, uint32_t *pWriteData); +/** + * @} + */ + +/* Peripheral Control functions ************************************************/ +/** @addtogroup HAL_SDMMC_LL_Group3 + * @{ + */ +HAL_StatusTypeDef SDIO_PowerState_ON(SDIO_TypeDef *SDIOx); +HAL_StatusTypeDef SDIO_PowerState_OFF(SDIO_TypeDef *SDIOx); +uint32_t SDIO_GetPowerState(SDIO_TypeDef *SDIOx); + +/* Command path state machine (CPSM) management functions */ +HAL_StatusTypeDef SDIO_SendCommand(SDIO_TypeDef *SDIOx, SDIO_CmdInitTypeDef *Command); +uint8_t SDIO_GetCommandResponse(SDIO_TypeDef *SDIOx); +uint32_t SDIO_GetResponse(SDIO_TypeDef *SDIOx, uint32_t Response); + +/* Data path state machine (DPSM) management functions */ +HAL_StatusTypeDef SDIO_ConfigData(SDIO_TypeDef *SDIOx, SDIO_DataInitTypeDef* Data); +uint32_t SDIO_GetDataCounter(SDIO_TypeDef *SDIOx); +uint32_t SDIO_GetFIFOCount(SDIO_TypeDef *SDIOx); + +/* SDMMC Cards mode management functions */ +HAL_StatusTypeDef SDIO_SetSDMMCReadWaitMode(SDIO_TypeDef *SDIOx, uint32_t SDIO_ReadWaitMode); + +/* SDMMC Commands management functions */ +uint32_t SDMMC_CmdBlockLength(SDIO_TypeDef *SDIOx, uint32_t BlockSize); +uint32_t SDMMC_CmdReadSingleBlock(SDIO_TypeDef *SDIOx, uint32_t ReadAdd); +uint32_t SDMMC_CmdReadMultiBlock(SDIO_TypeDef *SDIOx, uint32_t ReadAdd); +uint32_t SDMMC_CmdWriteSingleBlock(SDIO_TypeDef *SDIOx, uint32_t WriteAdd); +uint32_t SDMMC_CmdWriteMultiBlock(SDIO_TypeDef *SDIOx, uint32_t WriteAdd); +uint32_t SDMMC_CmdSDEraseStartAdd(SDIO_TypeDef *SDIOx, uint32_t StartAdd); +uint32_t SDMMC_CmdSDEraseEndAdd(SDIO_TypeDef *SDIOx, uint32_t EndAdd); +uint32_t SDMMC_CmdErase(SDIO_TypeDef *SDIOx); +uint32_t SDMMC_CmdStopTransfer(SDIO_TypeDef *SDIOx); +uint32_t SDMMC_CmdSelDesel(SDIO_TypeDef *SDIOx, uint64_t Addr); +uint32_t SDMMC_CmdGoIdleState(SDIO_TypeDef *SDIOx); +uint32_t SDMMC_CmdOperCond(SDIO_TypeDef *SDIOx); +uint32_t SDMMC_CmdAppCommand(SDIO_TypeDef *SDIOx, uint32_t Argument); +uint32_t SDMMC_CmdAppOperCommand(SDIO_TypeDef *SDIOx, uint32_t SdType); +uint32_t SDMMC_CmdBusWidth(SDIO_TypeDef *SDIOx, uint32_t BusWidth); +uint32_t SDMMC_CmdSendSCR(SDIO_TypeDef *SDIOx); +uint32_t SDMMC_CmdSendCID(SDIO_TypeDef *SDIOx); +uint32_t SDMMC_CmdSendCSD(SDIO_TypeDef *SDIOx, uint32_t Argument); +uint32_t SDMMC_CmdSetRelAdd(SDIO_TypeDef *SDIOx, uint16_t *pRCA); +uint32_t SDMMC_CmdSendStatus(SDIO_TypeDef *SDIOx, uint32_t Argument); +uint32_t SDMMC_CmdStatusRegister(SDIO_TypeDef *SDIOx); + +uint32_t SDMMC_CmdOpCondition(SDIO_TypeDef *SDIOx, uint32_t Argument); +uint32_t SDMMC_CmdSwitch(SDIO_TypeDef *SDIOx, uint32_t Argument); +uint32_t SDMMC_CmdEraseStartAdd(SDIO_TypeDef *SDIOx, uint32_t StartAdd); +uint32_t SDMMC_CmdEraseEndAdd(SDIO_TypeDef *SDIOx, uint32_t EndAdd); + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || + STM32F401xC || STM32F401xE || STM32F411xE || STM32F446xx || STM32F469xx || STM32F479xx || STM32F412Zx || STM32F412Vx || + STM32F412Rx || STM32F412Cx || STM32F413xx || STM32F423xx */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F4xx_LL_SDMMC_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_usb.h b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_usb.h new file mode 100644 index 0000000..da1468c --- /dev/null +++ b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_usb.h @@ -0,0 +1,511 @@ +/** + ****************************************************************************** + * @file stm32f4xx_ll_usb.h + * @author MCD Application Team + * @brief Header file of USB Low Layer HAL module. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32F4xx_LL_USB_H +#define STM32F4xx_LL_USB_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f4xx_hal_def.h" + +#if defined (USB_OTG_FS) || defined (USB_OTG_HS) +/** @addtogroup STM32F4xx_HAL_Driver + * @{ + */ + +/** @addtogroup USB_LL + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ + +/** + * @brief USB Mode definition + */ +#if defined (USB_OTG_FS) || defined (USB_OTG_HS) + +typedef enum +{ + USB_DEVICE_MODE = 0, + USB_HOST_MODE = 1, + USB_DRD_MODE = 2 +} USB_OTG_ModeTypeDef; + +/** + * @brief URB States definition + */ +typedef enum +{ + URB_IDLE = 0, + URB_DONE, + URB_NOTREADY, + URB_NYET, + URB_ERROR, + URB_STALL +} USB_OTG_URBStateTypeDef; + +/** + * @brief Host channel States definition + */ +typedef enum +{ + HC_IDLE = 0, + HC_XFRC, + HC_HALTED, + HC_NAK, + HC_NYET, + HC_STALL, + HC_XACTERR, + HC_BBLERR, + HC_DATATGLERR +} USB_OTG_HCStateTypeDef; + +/** + * @brief USB OTG Initialization Structure definition + */ +typedef struct +{ + uint32_t dev_endpoints; /*!< Device Endpoints number. + This parameter depends on the used USB core. + This parameter must be a number between Min_Data = 1 and Max_Data = 15 */ + + uint32_t Host_channels; /*!< Host Channels number. + This parameter Depends on the used USB core. + This parameter must be a number between Min_Data = 1 and Max_Data = 15 */ + + uint32_t speed; /*!< USB Core speed. + This parameter can be any value of @ref USB_Core_Speed_ */ + + uint32_t dma_enable; /*!< Enable or disable of the USB embedded DMA used only for OTG HS. */ + + uint32_t ep0_mps; /*!< Set the Endpoint 0 Max Packet size. */ + + uint32_t phy_itface; /*!< Select the used PHY interface. + This parameter can be any value of @ref USB_Core_PHY_ */ + + uint32_t Sof_enable; /*!< Enable or disable the output of the SOF signal. */ + + uint32_t low_power_enable; /*!< Enable or disable the low power mode. */ + + uint32_t lpm_enable; /*!< Enable or disable Link Power Management. */ + + uint32_t battery_charging_enable; /*!< Enable or disable Battery charging. */ + + uint32_t vbus_sensing_enable; /*!< Enable or disable the VBUS Sensing feature. */ + + uint32_t use_dedicated_ep1; /*!< Enable or disable the use of the dedicated EP1 interrupt. */ + + uint32_t use_external_vbus; /*!< Enable or disable the use of the external VBUS. */ +} USB_OTG_CfgTypeDef; + +typedef struct +{ + uint8_t num; /*!< Endpoint number + This parameter must be a number between Min_Data = 1 and Max_Data = 15 */ + + uint8_t is_in; /*!< Endpoint direction + This parameter must be a number between Min_Data = 0 and Max_Data = 1 */ + + uint8_t is_stall; /*!< Endpoint stall condition + This parameter must be a number between Min_Data = 0 and Max_Data = 1 */ + + uint8_t type; /*!< Endpoint type + This parameter can be any value of @ref USB_EP_Type_ */ + + uint8_t data_pid_start; /*!< Initial data PID + This parameter must be a number between Min_Data = 0 and Max_Data = 1 */ + + uint8_t even_odd_frame; /*!< IFrame parity + This parameter must be a number between Min_Data = 0 and Max_Data = 1 */ + + uint16_t tx_fifo_num; /*!< Transmission FIFO number + This parameter must be a number between Min_Data = 1 and Max_Data = 15 */ + + uint32_t maxpacket; /*!< Endpoint Max packet size + This parameter must be a number between Min_Data = 0 and Max_Data = 64KB */ + + uint8_t *xfer_buff; /*!< Pointer to transfer buffer */ + + uint32_t dma_addr; /*!< 32 bits aligned transfer buffer address */ + + uint32_t xfer_len; /*!< Current transfer length */ + + uint32_t xfer_count; /*!< Partial transfer length in case of multi packet transfer */ +} USB_OTG_EPTypeDef; + +typedef struct +{ + uint8_t dev_addr ; /*!< USB device address. + This parameter must be a number between Min_Data = 1 and Max_Data = 255 */ + + uint8_t ch_num; /*!< Host channel number. + This parameter must be a number between Min_Data = 1 and Max_Data = 15 */ + + uint8_t ep_num; /*!< Endpoint number. + This parameter must be a number between Min_Data = 1 and Max_Data = 15 */ + + uint8_t ep_is_in; /*!< Endpoint direction + This parameter must be a number between Min_Data = 0 and Max_Data = 1 */ + + uint8_t speed; /*!< USB Host speed. + This parameter can be any value of @ref USB_Core_Speed_ */ + + uint8_t do_ping; /*!< Enable or disable the use of the PING protocol for HS mode. */ + + uint8_t process_ping; /*!< Execute the PING protocol for HS mode. */ + + uint8_t ep_type; /*!< Endpoint Type. + This parameter can be any value of @ref USB_EP_Type_ */ + + uint16_t max_packet; /*!< Endpoint Max packet size. + This parameter must be a number between Min_Data = 0 and Max_Data = 64KB */ + + uint8_t data_pid; /*!< Initial data PID. + This parameter must be a number between Min_Data = 0 and Max_Data = 1 */ + + uint8_t *xfer_buff; /*!< Pointer to transfer buffer. */ + + uint32_t xfer_len; /*!< Current transfer length. */ + + uint32_t xfer_count; /*!< Partial transfer length in case of multi packet transfer. */ + + uint8_t toggle_in; /*!< IN transfer current toggle flag. + This parameter must be a number between Min_Data = 0 and Max_Data = 1 */ + + uint8_t toggle_out; /*!< OUT transfer current toggle flag + This parameter must be a number between Min_Data = 0 and Max_Data = 1 */ + + uint32_t dma_addr; /*!< 32 bits aligned transfer buffer address. */ + + uint32_t ErrCnt; /*!< Host channel error count.*/ + + USB_OTG_URBStateTypeDef urb_state; /*!< URB state. + This parameter can be any value of @ref USB_OTG_URBStateTypeDef */ + + USB_OTG_HCStateTypeDef state; /*!< Host Channel state. + This parameter can be any value of @ref USB_OTG_HCStateTypeDef */ +} USB_OTG_HCTypeDef; +#endif /* defined (USB_OTG_FS) || defined (USB_OTG_HS) */ + + +/* Exported constants --------------------------------------------------------*/ + +/** @defgroup PCD_Exported_Constants PCD Exported Constants + * @{ + */ + +#if defined (USB_OTG_FS) || defined (USB_OTG_HS) +/** @defgroup USB_OTG_CORE VERSION ID + * @{ + */ +#define USB_OTG_CORE_ID_300A 0x4F54300AU +#define USB_OTG_CORE_ID_310A 0x4F54310AU +/** + * @} + */ + +/** @defgroup USB_Core_Mode_ USB Core Mode + * @{ + */ +#define USB_OTG_MODE_DEVICE 0U +#define USB_OTG_MODE_HOST 1U +#define USB_OTG_MODE_DRD 2U +/** + * @} + */ + +/** @defgroup USB_LL Device Speed + * @{ + */ +#define USBD_HS_SPEED 0U +#define USBD_HSINFS_SPEED 1U +#define USBH_HS_SPEED 0U +#define USBD_FS_SPEED 2U +#define USBH_FS_SPEED 1U +/** + * @} + */ + +/** @defgroup USB_LL_Core_Speed USB Low Layer Core Speed + * @{ + */ +#define USB_OTG_SPEED_HIGH 0U +#define USB_OTG_SPEED_HIGH_IN_FULL 1U +#define USB_OTG_SPEED_FULL 3U +/** + * @} + */ + +/** @defgroup USB_LL_Core_PHY USB Low Layer Core PHY + * @{ + */ +#define USB_OTG_ULPI_PHY 1U +#define USB_OTG_EMBEDDED_PHY 2U +/** + * @} + */ + +/** @defgroup USB_LL_Turnaround_Timeout Turnaround Timeout Value + * @{ + */ +#ifndef USBD_HS_TRDT_VALUE +#define USBD_HS_TRDT_VALUE 9U +#endif /* USBD_HS_TRDT_VALUE */ +#ifndef USBD_FS_TRDT_VALUE +#define USBD_FS_TRDT_VALUE 5U +#define USBD_DEFAULT_TRDT_VALUE 9U +#endif /* USBD_HS_TRDT_VALUE */ +/** + * @} + */ + +/** @defgroup USB_LL_Core_MPS USB Low Layer Core MPS + * @{ + */ +#define USB_OTG_HS_MAX_PACKET_SIZE 512U +#define USB_OTG_FS_MAX_PACKET_SIZE 64U +#define USB_OTG_MAX_EP0_SIZE 64U +/** + * @} + */ + +/** @defgroup USB_LL_Core_PHY_Frequency USB Low Layer Core PHY Frequency + * @{ + */ +#define DSTS_ENUMSPD_HS_PHY_30MHZ_OR_60MHZ (0U << 1) +#define DSTS_ENUMSPD_FS_PHY_30MHZ_OR_60MHZ (1U << 1) +#define DSTS_ENUMSPD_LS_PHY_6MHZ (2U << 1) +#define DSTS_ENUMSPD_FS_PHY_48MHZ (3U << 1) +/** + * @} + */ + +/** @defgroup USB_LL_CORE_Frame_Interval USB Low Layer Core Frame Interval + * @{ + */ +#define DCFG_FRAME_INTERVAL_80 0U +#define DCFG_FRAME_INTERVAL_85 1U +#define DCFG_FRAME_INTERVAL_90 2U +#define DCFG_FRAME_INTERVAL_95 3U +/** + * @} + */ + +/** @defgroup USB_LL_EP0_MPS USB Low Layer EP0 MPS + * @{ + */ +#define DEP0CTL_MPS_64 0U +#define DEP0CTL_MPS_32 1U +#define DEP0CTL_MPS_16 2U +#define DEP0CTL_MPS_8 3U +/** + * @} + */ + +/** @defgroup USB_LL_EP_Speed USB Low Layer EP Speed + * @{ + */ +#define EP_SPEED_LOW 0U +#define EP_SPEED_FULL 1U +#define EP_SPEED_HIGH 2U +/** + * @} + */ + +/** @defgroup USB_LL_EP_Type USB Low Layer EP Type + * @{ + */ +#define EP_TYPE_CTRL 0U +#define EP_TYPE_ISOC 1U +#define EP_TYPE_BULK 2U +#define EP_TYPE_INTR 3U +#define EP_TYPE_MSK 3U +/** + * @} + */ + +/** @defgroup USB_LL_STS_Defines USB Low Layer STS Defines + * @{ + */ +#define STS_GOUT_NAK 1U +#define STS_DATA_UPDT 2U +#define STS_XFER_COMP 3U +#define STS_SETUP_COMP 4U +#define STS_SETUP_UPDT 6U +/** + * @} + */ + +/** @defgroup USB_LL_HCFG_SPEED_Defines USB Low Layer HCFG Speed Defines + * @{ + */ +#define HCFG_30_60_MHZ 0U +#define HCFG_48_MHZ 1U +#define HCFG_6_MHZ 2U +/** + * @} + */ + +/** @defgroup USB_LL_HPRT0_PRTSPD_SPEED_Defines USB Low Layer HPRT0 PRTSPD Speed Defines + * @{ + */ +#define HPRT0_PRTSPD_HIGH_SPEED 0U +#define HPRT0_PRTSPD_FULL_SPEED 1U +#define HPRT0_PRTSPD_LOW_SPEED 2U +/** + * @} + */ + +#define HCCHAR_CTRL 0U +#define HCCHAR_ISOC 1U +#define HCCHAR_BULK 2U +#define HCCHAR_INTR 3U + +#define HC_PID_DATA0 0U +#define HC_PID_DATA2 1U +#define HC_PID_DATA1 2U +#define HC_PID_SETUP 3U + +#define GRXSTS_PKTSTS_IN 2U +#define GRXSTS_PKTSTS_IN_XFER_COMP 3U +#define GRXSTS_PKTSTS_DATA_TOGGLE_ERR 5U +#define GRXSTS_PKTSTS_CH_HALTED 7U + +#define USBx_PCGCCTL *(__IO uint32_t *)((uint32_t)USBx_BASE + USB_OTG_PCGCCTL_BASE) +#define USBx_HPRT0 *(__IO uint32_t *)((uint32_t)USBx_BASE + USB_OTG_HOST_PORT_BASE) + +#define USBx_DEVICE ((USB_OTG_DeviceTypeDef *)(USBx_BASE + USB_OTG_DEVICE_BASE)) +#define USBx_INEP(i) ((USB_OTG_INEndpointTypeDef *)(USBx_BASE + USB_OTG_IN_ENDPOINT_BASE + ((i) * USB_OTG_EP_REG_SIZE))) +#define USBx_OUTEP(i) ((USB_OTG_OUTEndpointTypeDef *)(USBx_BASE + USB_OTG_OUT_ENDPOINT_BASE + ((i) * USB_OTG_EP_REG_SIZE))) +#define USBx_DFIFO(i) *(__IO uint32_t *)(USBx_BASE + USB_OTG_FIFO_BASE + ((i) * USB_OTG_FIFO_SIZE)) + +#define USBx_HOST ((USB_OTG_HostTypeDef *)(USBx_BASE + USB_OTG_HOST_BASE)) +#define USBx_HC(i) ((USB_OTG_HostChannelTypeDef *)(USBx_BASE + USB_OTG_HOST_CHANNEL_BASE + ((i) * USB_OTG_HOST_CHANNEL_SIZE))) +#endif /* defined (USB_OTG_FS) || defined (USB_OTG_HS) */ + +#define EP_ADDR_MSK 0xFU +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup USB_LL_Exported_Macros USB Low Layer Exported Macros + * @{ + */ +#if defined (USB_OTG_FS) || defined (USB_OTG_HS) +#define USB_MASK_INTERRUPT(__INSTANCE__, __INTERRUPT__) ((__INSTANCE__)->GINTMSK &= ~(__INTERRUPT__)) +#define USB_UNMASK_INTERRUPT(__INSTANCE__, __INTERRUPT__) ((__INSTANCE__)->GINTMSK |= (__INTERRUPT__)) + +#define CLEAR_IN_EP_INTR(__EPNUM__, __INTERRUPT__) (USBx_INEP(__EPNUM__)->DIEPINT = (__INTERRUPT__)) +#define CLEAR_OUT_EP_INTR(__EPNUM__, __INTERRUPT__) (USBx_OUTEP(__EPNUM__)->DOEPINT = (__INTERRUPT__)) +#endif /* defined (USB_OTG_FS) || defined (USB_OTG_HS) */ +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup USB_LL_Exported_Functions USB Low Layer Exported Functions + * @{ + */ +#if defined (USB_OTG_FS) || defined (USB_OTG_HS) +HAL_StatusTypeDef USB_CoreInit(USB_OTG_GlobalTypeDef *USBx, USB_OTG_CfgTypeDef cfg); +HAL_StatusTypeDef USB_DevInit(USB_OTG_GlobalTypeDef *USBx, USB_OTG_CfgTypeDef cfg); +HAL_StatusTypeDef USB_EnableGlobalInt(USB_OTG_GlobalTypeDef *USBx); +HAL_StatusTypeDef USB_DisableGlobalInt(USB_OTG_GlobalTypeDef *USBx); +HAL_StatusTypeDef USB_SetTurnaroundTime(USB_OTG_GlobalTypeDef *USBx, uint32_t hclk, uint8_t speed); +HAL_StatusTypeDef USB_SetCurrentMode(USB_OTG_GlobalTypeDef *USBx, USB_OTG_ModeTypeDef mode); +HAL_StatusTypeDef USB_SetDevSpeed(USB_OTG_GlobalTypeDef *USBx, uint8_t speed); +HAL_StatusTypeDef USB_FlushRxFifo(USB_OTG_GlobalTypeDef *USBx); +HAL_StatusTypeDef USB_FlushTxFifo(USB_OTG_GlobalTypeDef *USBx, uint32_t num); +HAL_StatusTypeDef USB_ActivateEndpoint(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep); +HAL_StatusTypeDef USB_DeactivateEndpoint(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep); +HAL_StatusTypeDef USB_ActivateDedicatedEndpoint(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep); +HAL_StatusTypeDef USB_DeactivateDedicatedEndpoint(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep); +HAL_StatusTypeDef USB_EPStartXfer(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep, uint8_t dma); +HAL_StatusTypeDef USB_EP0StartXfer(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep, uint8_t dma); +HAL_StatusTypeDef USB_WritePacket(USB_OTG_GlobalTypeDef *USBx, uint8_t *src, uint8_t ch_ep_num, uint16_t len, uint8_t dma); +void *USB_ReadPacket(USB_OTG_GlobalTypeDef *USBx, uint8_t *dest, uint16_t len); +HAL_StatusTypeDef USB_EPSetStall(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep); +HAL_StatusTypeDef USB_EPClearStall(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep); +HAL_StatusTypeDef USB_SetDevAddress(USB_OTG_GlobalTypeDef *USBx, uint8_t address); +HAL_StatusTypeDef USB_DevConnect(USB_OTG_GlobalTypeDef *USBx); +HAL_StatusTypeDef USB_DevDisconnect(USB_OTG_GlobalTypeDef *USBx); +HAL_StatusTypeDef USB_StopDevice(USB_OTG_GlobalTypeDef *USBx); +HAL_StatusTypeDef USB_ActivateSetup(USB_OTG_GlobalTypeDef *USBx); +HAL_StatusTypeDef USB_EP0_OutStart(USB_OTG_GlobalTypeDef *USBx, uint8_t dma, uint8_t *psetup); +uint8_t USB_GetDevSpeed(USB_OTG_GlobalTypeDef *USBx); +uint32_t USB_GetMode(USB_OTG_GlobalTypeDef *USBx); +uint32_t USB_ReadInterrupts(USB_OTG_GlobalTypeDef *USBx); +uint32_t USB_ReadDevAllOutEpInterrupt(USB_OTG_GlobalTypeDef *USBx); +uint32_t USB_ReadDevOutEPInterrupt(USB_OTG_GlobalTypeDef *USBx, uint8_t epnum); +uint32_t USB_ReadDevAllInEpInterrupt(USB_OTG_GlobalTypeDef *USBx); +uint32_t USB_ReadDevInEPInterrupt(USB_OTG_GlobalTypeDef *USBx, uint8_t epnum); +void USB_ClearInterrupts(USB_OTG_GlobalTypeDef *USBx, uint32_t interrupt); + +HAL_StatusTypeDef USB_HostInit(USB_OTG_GlobalTypeDef *USBx, USB_OTG_CfgTypeDef cfg); +HAL_StatusTypeDef USB_InitFSLSPClkSel(USB_OTG_GlobalTypeDef *USBx, uint8_t freq); +HAL_StatusTypeDef USB_ResetPort(USB_OTG_GlobalTypeDef *USBx); +HAL_StatusTypeDef USB_DriveVbus(USB_OTG_GlobalTypeDef *USBx, uint8_t state); +uint32_t USB_GetHostSpeed(USB_OTG_GlobalTypeDef *USBx); +uint32_t USB_GetCurrentFrame(USB_OTG_GlobalTypeDef *USBx); +HAL_StatusTypeDef USB_HC_Init(USB_OTG_GlobalTypeDef *USBx, + uint8_t ch_num, + uint8_t epnum, + uint8_t dev_address, + uint8_t speed, + uint8_t ep_type, + uint16_t mps); +HAL_StatusTypeDef USB_HC_StartXfer(USB_OTG_GlobalTypeDef *USBx, USB_OTG_HCTypeDef *hc, uint8_t dma); +uint32_t USB_HC_ReadInterrupt(USB_OTG_GlobalTypeDef *USBx); +HAL_StatusTypeDef USB_HC_Halt(USB_OTG_GlobalTypeDef *USBx, uint8_t hc_num); +HAL_StatusTypeDef USB_DoPing(USB_OTG_GlobalTypeDef *USBx, uint8_t ch_num); +HAL_StatusTypeDef USB_StopHost(USB_OTG_GlobalTypeDef *USBx); +HAL_StatusTypeDef USB_ActivateRemoteWakeup(USB_OTG_GlobalTypeDef *USBx); +HAL_StatusTypeDef USB_DeActivateRemoteWakeup(USB_OTG_GlobalTypeDef *USBx); +#endif /* defined (USB_OTG_FS) || defined (USB_OTG_HS) */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ +#endif /* defined (USB_OTG_FS) || defined (USB_OTG_HS) */ + +#ifdef __cplusplus +} +#endif + + +#endif /* STM32F4xx_LL_USB_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_pcd.c b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_pcd.c new file mode 100644 index 0000000..8c89e58 --- /dev/null +++ b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_pcd.c @@ -0,0 +1,2223 @@ +/** + ****************************************************************************** + * @file stm32f4xx_hal_pcd.c + * @author MCD Application Team + * @brief PCD HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the USB Peripheral Controller: + * + Initialization and de-initialization functions + * + IO operation functions + * + Peripheral Control functions + * + Peripheral State functions + * + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] + The PCD HAL driver can be used as follows: + + (#) Declare a PCD_HandleTypeDef handle structure, for example: + PCD_HandleTypeDef hpcd; + + (#) Fill parameters of Init structure in HCD handle + + (#) Call HAL_PCD_Init() API to initialize the PCD peripheral (Core, Device core, ...) + + (#) Initialize the PCD low level resources through the HAL_PCD_MspInit() API: + (##) Enable the PCD/USB Low Level interface clock using + (+++) __HAL_RCC_USB_OTG_FS_CLK_ENABLE(); + (+++) __HAL_RCC_USB_OTG_HS_CLK_ENABLE(); (For High Speed Mode) + + (##) Initialize the related GPIO clocks + (##) Configure PCD pin-out + (##) Configure PCD NVIC interrupt + + (#)Associate the Upper USB device stack to the HAL PCD Driver: + (##) hpcd.pData = pdev; + + (#)Enable PCD transmission and reception: + (##) HAL_PCD_Start(); + + @endverbatim + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f4xx_hal.h" + +/** @addtogroup STM32F4xx_HAL_Driver + * @{ + */ + +/** @defgroup PCD PCD + * @brief PCD HAL module driver + * @{ + */ + +#ifdef HAL_PCD_MODULE_ENABLED + +#if defined (USB_OTG_FS) || defined (USB_OTG_HS) + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ +/** @defgroup PCD_Private_Macros PCD Private Macros + * @{ + */ +#define PCD_MIN(a, b) (((a) < (b)) ? (a) : (b)) +#define PCD_MAX(a, b) (((a) > (b)) ? (a) : (b)) +/** + * @} + */ + +/* Private functions prototypes ----------------------------------------------*/ +/** @defgroup PCD_Private_Functions PCD Private Functions + * @{ + */ +#if defined (USB_OTG_FS) || defined (USB_OTG_HS) +static HAL_StatusTypeDef PCD_WriteEmptyTxFifo(PCD_HandleTypeDef *hpcd, uint32_t epnum); +static HAL_StatusTypeDef PCD_EP_OutXfrComplete_int(PCD_HandleTypeDef *hpcd, uint32_t epnum); +static HAL_StatusTypeDef PCD_EP_OutSetupPacket_int(PCD_HandleTypeDef *hpcd, uint32_t epnum); +#endif /* defined (USB_OTG_FS) || defined (USB_OTG_HS) */ +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup PCD_Exported_Functions PCD Exported Functions + * @{ + */ + +/** @defgroup PCD_Exported_Functions_Group1 Initialization and de-initialization functions + * @brief Initialization and Configuration functions + * +@verbatim + =============================================================================== + ##### Initialization and de-initialization functions ##### + =============================================================================== + [..] This section provides functions allowing to: + +@endverbatim + * @{ + */ + +/** + * @brief Initializes the PCD according to the specified + * parameters in the PCD_InitTypeDef and initialize the associated handle. + * @param hpcd PCD handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_Init(PCD_HandleTypeDef *hpcd) +{ + USB_OTG_GlobalTypeDef *USBx; + uint8_t i; + + /* Check the PCD handle allocation */ + if (hpcd == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_PCD_ALL_INSTANCE(hpcd->Instance)); + + USBx = hpcd->Instance; + + if (hpcd->State == HAL_PCD_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + hpcd->Lock = HAL_UNLOCKED; + +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) + hpcd->SOFCallback = HAL_PCD_SOFCallback; + hpcd->SetupStageCallback = HAL_PCD_SetupStageCallback; + hpcd->ResetCallback = HAL_PCD_ResetCallback; + hpcd->SuspendCallback = HAL_PCD_SuspendCallback; + hpcd->ResumeCallback = HAL_PCD_ResumeCallback; + hpcd->ConnectCallback = HAL_PCD_ConnectCallback; + hpcd->DisconnectCallback = HAL_PCD_DisconnectCallback; + hpcd->DataOutStageCallback = HAL_PCD_DataOutStageCallback; + hpcd->DataInStageCallback = HAL_PCD_DataInStageCallback; + hpcd->ISOOUTIncompleteCallback = HAL_PCD_ISOOUTIncompleteCallback; + hpcd->ISOINIncompleteCallback = HAL_PCD_ISOINIncompleteCallback; + hpcd->LPMCallback = HAL_PCDEx_LPM_Callback; + hpcd->BCDCallback = HAL_PCDEx_BCD_Callback; + + if (hpcd->MspInitCallback == NULL) + { + hpcd->MspInitCallback = HAL_PCD_MspInit; + } + + /* Init the low level hardware */ + hpcd->MspInitCallback(hpcd); +#else + /* Init the low level hardware : GPIO, CLOCK, NVIC... */ + HAL_PCD_MspInit(hpcd); +#endif /* (USE_HAL_PCD_REGISTER_CALLBACKS) */ + } + + hpcd->State = HAL_PCD_STATE_BUSY; + + /* Disable DMA mode for FS instance */ + if ((USBx->CID & (0x1U << 8)) == 0U) + { + hpcd->Init.dma_enable = 0U; + } + + /* Disable the Interrupts */ + __HAL_PCD_DISABLE(hpcd); + + /*Init the Core (common init.) */ + if (USB_CoreInit(hpcd->Instance, hpcd->Init) != HAL_OK) + { + hpcd->State = HAL_PCD_STATE_ERROR; + return HAL_ERROR; + } + + /* Force Device Mode*/ + (void)USB_SetCurrentMode(hpcd->Instance, USB_DEVICE_MODE); + + /* Init endpoints structures */ + for (i = 0U; i < hpcd->Init.dev_endpoints; i++) + { + /* Init ep structure */ + hpcd->IN_ep[i].is_in = 1U; + hpcd->IN_ep[i].num = i; + hpcd->IN_ep[i].tx_fifo_num = i; + /* Control until ep is activated */ + hpcd->IN_ep[i].type = EP_TYPE_CTRL; + hpcd->IN_ep[i].maxpacket = 0U; + hpcd->IN_ep[i].xfer_buff = 0U; + hpcd->IN_ep[i].xfer_len = 0U; + } + + for (i = 0U; i < hpcd->Init.dev_endpoints; i++) + { + hpcd->OUT_ep[i].is_in = 0U; + hpcd->OUT_ep[i].num = i; + /* Control until ep is activated */ + hpcd->OUT_ep[i].type = EP_TYPE_CTRL; + hpcd->OUT_ep[i].maxpacket = 0U; + hpcd->OUT_ep[i].xfer_buff = 0U; + hpcd->OUT_ep[i].xfer_len = 0U; + } + + /* Init Device */ + if (USB_DevInit(hpcd->Instance, hpcd->Init) != HAL_OK) + { + hpcd->State = HAL_PCD_STATE_ERROR; + return HAL_ERROR; + } + + hpcd->USB_Address = 0U; + hpcd->State = HAL_PCD_STATE_READY; + #if defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx) + /* Activate LPM */ + if (hpcd->Init.lpm_enable == 1U) + { + (void)HAL_PCDEx_ActivateLPM(hpcd); + } + #endif /* defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx) */ + (void)USB_DevDisconnect(hpcd->Instance); + + return HAL_OK; +} + +/** + * @brief DeInitializes the PCD peripheral. + * @param hpcd PCD handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_DeInit(PCD_HandleTypeDef *hpcd) +{ + /* Check the PCD handle allocation */ + if (hpcd == NULL) + { + return HAL_ERROR; + } + + hpcd->State = HAL_PCD_STATE_BUSY; + + /* Stop Device */ + (void)HAL_PCD_Stop(hpcd); + +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) + if (hpcd->MspDeInitCallback == NULL) + { + hpcd->MspDeInitCallback = HAL_PCD_MspDeInit; /* Legacy weak MspDeInit */ + } + + /* DeInit the low level hardware */ + hpcd->MspDeInitCallback(hpcd); +#else + /* DeInit the low level hardware: CLOCK, NVIC.*/ + HAL_PCD_MspDeInit(hpcd); +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ + + hpcd->State = HAL_PCD_STATE_RESET; + + return HAL_OK; +} + +/** + * @brief Initializes the PCD MSP. + * @param hpcd PCD handle + * @retval None + */ +__weak void HAL_PCD_MspInit(PCD_HandleTypeDef *hpcd) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hpcd); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_PCD_MspInit could be implemented in the user file + */ +} + +/** + * @brief DeInitializes PCD MSP. + * @param hpcd PCD handle + * @retval None + */ +__weak void HAL_PCD_MspDeInit(PCD_HandleTypeDef *hpcd) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hpcd); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_PCD_MspDeInit could be implemented in the user file + */ +} + +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) +/** + * @brief Register a User USB PCD Callback + * To be used instead of the weak predefined callback + * @param hpcd USB PCD handle + * @param CallbackID ID of the callback to be registered + * This parameter can be one of the following values: + * @arg @ref HAL_PCD_SOF_CB_ID USB PCD SOF callback ID + * @arg @ref HAL_PCD_SETUPSTAGE_CB_ID USB PCD Setup callback ID + * @arg @ref HAL_PCD_RESET_CB_ID USB PCD Reset callback ID + * @arg @ref HAL_PCD_SUSPEND_CB_ID USB PCD Suspend callback ID + * @arg @ref HAL_PCD_RESUME_CB_ID USB PCD Resume callback ID + * @arg @ref HAL_PCD_CONNECT_CB_ID USB PCD Connect callback ID + * @arg @ref HAL_PCD_DISCONNECT_CB_ID OTG PCD Disconnect callback ID + * @arg @ref HAL_PCD_MSPINIT_CB_ID MspDeInit callback ID + * @arg @ref HAL_PCD_MSPDEINIT_CB_ID MspDeInit callback ID + * @param pCallback pointer to the Callback function + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_RegisterCallback(PCD_HandleTypeDef *hpcd, HAL_PCD_CallbackIDTypeDef CallbackID, pPCD_CallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + /* Update the error code */ + hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; + return HAL_ERROR; + } + /* Process locked */ + __HAL_LOCK(hpcd); + + if (hpcd->State == HAL_PCD_STATE_READY) + { + switch (CallbackID) + { + case HAL_PCD_SOF_CB_ID : + hpcd->SOFCallback = pCallback; + break; + + case HAL_PCD_SETUPSTAGE_CB_ID : + hpcd->SetupStageCallback = pCallback; + break; + + case HAL_PCD_RESET_CB_ID : + hpcd->ResetCallback = pCallback; + break; + + case HAL_PCD_SUSPEND_CB_ID : + hpcd->SuspendCallback = pCallback; + break; + + case HAL_PCD_RESUME_CB_ID : + hpcd->ResumeCallback = pCallback; + break; + + case HAL_PCD_CONNECT_CB_ID : + hpcd->ConnectCallback = pCallback; + break; + + case HAL_PCD_DISCONNECT_CB_ID : + hpcd->DisconnectCallback = pCallback; + break; + + case HAL_PCD_MSPINIT_CB_ID : + hpcd->MspInitCallback = pCallback; + break; + + case HAL_PCD_MSPDEINIT_CB_ID : + hpcd->MspDeInitCallback = pCallback; + break; + + default : + /* Update the error code */ + hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else if (hpcd->State == HAL_PCD_STATE_RESET) + { + switch (CallbackID) + { + case HAL_PCD_MSPINIT_CB_ID : + hpcd->MspInitCallback = pCallback; + break; + + case HAL_PCD_MSPDEINIT_CB_ID : + hpcd->MspDeInitCallback = pCallback; + break; + + default : + /* Update the error code */ + hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Update the error code */ + hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hpcd); + return status; +} + +/** + * @brief Unregister an USB PCD Callback + * USB PCD callabck is redirected to the weak predefined callback + * @param hpcd USB PCD handle + * @param CallbackID ID of the callback to be unregistered + * This parameter can be one of the following values: + * @arg @ref HAL_PCD_SOF_CB_ID USB PCD SOF callback ID + * @arg @ref HAL_PCD_SETUPSTAGE_CB_ID USB PCD Setup callback ID + * @arg @ref HAL_PCD_RESET_CB_ID USB PCD Reset callback ID + * @arg @ref HAL_PCD_SUSPEND_CB_ID USB PCD Suspend callback ID + * @arg @ref HAL_PCD_RESUME_CB_ID USB PCD Resume callback ID + * @arg @ref HAL_PCD_CONNECT_CB_ID USB PCD Connect callback ID + * @arg @ref HAL_PCD_DISCONNECT_CB_ID OTG PCD Disconnect callback ID + * @arg @ref HAL_PCD_MSPINIT_CB_ID MspDeInit callback ID + * @arg @ref HAL_PCD_MSPDEINIT_CB_ID MspDeInit callback ID + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_UnRegisterCallback(PCD_HandleTypeDef *hpcd, HAL_PCD_CallbackIDTypeDef CallbackID) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Process locked */ + __HAL_LOCK(hpcd); + + /* Setup Legacy weak Callbacks */ + if (hpcd->State == HAL_PCD_STATE_READY) + { + switch (CallbackID) + { + case HAL_PCD_SOF_CB_ID : + hpcd->SOFCallback = HAL_PCD_SOFCallback; + break; + + case HAL_PCD_SETUPSTAGE_CB_ID : + hpcd->SetupStageCallback = HAL_PCD_SetupStageCallback; + break; + + case HAL_PCD_RESET_CB_ID : + hpcd->ResetCallback = HAL_PCD_ResetCallback; + break; + + case HAL_PCD_SUSPEND_CB_ID : + hpcd->SuspendCallback = HAL_PCD_SuspendCallback; + break; + + case HAL_PCD_RESUME_CB_ID : + hpcd->ResumeCallback = HAL_PCD_ResumeCallback; + break; + + case HAL_PCD_CONNECT_CB_ID : + hpcd->ConnectCallback = HAL_PCD_ConnectCallback; + break; + + case HAL_PCD_DISCONNECT_CB_ID : + hpcd->DisconnectCallback = HAL_PCD_DisconnectCallback; + break; + + case HAL_PCD_MSPINIT_CB_ID : + hpcd->MspInitCallback = HAL_PCD_MspInit; + break; + + case HAL_PCD_MSPDEINIT_CB_ID : + hpcd->MspDeInitCallback = HAL_PCD_MspDeInit; + break; + + default : + /* Update the error code */ + hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else if (hpcd->State == HAL_PCD_STATE_RESET) + { + switch (CallbackID) + { + case HAL_PCD_MSPINIT_CB_ID : + hpcd->MspInitCallback = HAL_PCD_MspInit; + break; + + case HAL_PCD_MSPDEINIT_CB_ID : + hpcd->MspDeInitCallback = HAL_PCD_MspDeInit; + break; + + default : + /* Update the error code */ + hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Update the error code */ + hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hpcd); + return status; +} + +/** + * @brief Register USB PCD Data OUT Stage Callback + * To be used instead of the weak HAL_PCD_DataOutStageCallback() predefined callback + * @param hpcd PCD handle + * @param pCallback pointer to the USB PCD Data OUT Stage Callback function + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_RegisterDataOutStageCallback(PCD_HandleTypeDef *hpcd, pPCD_DataOutStageCallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + /* Update the error code */ + hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; + + return HAL_ERROR; + } + + /* Process locked */ + __HAL_LOCK(hpcd); + + if (hpcd->State == HAL_PCD_STATE_READY) + { + hpcd->DataOutStageCallback = pCallback; + } + else + { + /* Update the error code */ + hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hpcd); + + return status; +} + +/** + * @brief UnRegister the USB PCD Data OUT Stage Callback + * USB PCD Data OUT Stage Callback is redirected to the weak HAL_PCD_DataOutStageCallback() predefined callback + * @param hpcd PCD handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_UnRegisterDataOutStageCallback(PCD_HandleTypeDef *hpcd) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Process locked */ + __HAL_LOCK(hpcd); + + if (hpcd->State == HAL_PCD_STATE_READY) + { + hpcd->DataOutStageCallback = HAL_PCD_DataOutStageCallback; /* Legacy weak DataOutStageCallback */ + } + else + { + /* Update the error code */ + hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hpcd); + + return status; +} + +/** + * @brief Register USB PCD Data IN Stage Callback + * To be used instead of the weak HAL_PCD_DataInStageCallback() predefined callback + * @param hpcd PCD handle + * @param pCallback pointer to the USB PCD Data IN Stage Callback function + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_RegisterDataInStageCallback(PCD_HandleTypeDef *hpcd, pPCD_DataInStageCallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + /* Update the error code */ + hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; + + return HAL_ERROR; + } + + /* Process locked */ + __HAL_LOCK(hpcd); + + if (hpcd->State == HAL_PCD_STATE_READY) + { + hpcd->DataInStageCallback = pCallback; + } + else + { + /* Update the error code */ + hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hpcd); + + return status; +} + +/** + * @brief UnRegister the USB PCD Data IN Stage Callback + * USB PCD Data OUT Stage Callback is redirected to the weak HAL_PCD_DataInStageCallback() predefined callback + * @param hpcd PCD handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_UnRegisterDataInStageCallback(PCD_HandleTypeDef *hpcd) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Process locked */ + __HAL_LOCK(hpcd); + + if (hpcd->State == HAL_PCD_STATE_READY) + { + hpcd->DataInStageCallback = HAL_PCD_DataInStageCallback; /* Legacy weak DataInStageCallback */ + } + else + { + /* Update the error code */ + hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hpcd); + + return status; +} + +/** + * @brief Register USB PCD Iso OUT incomplete Callback + * To be used instead of the weak HAL_PCD_ISOOUTIncompleteCallback() predefined callback + * @param hpcd PCD handle + * @param pCallback pointer to the USB PCD Iso OUT incomplete Callback function + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_RegisterIsoOutIncpltCallback(PCD_HandleTypeDef *hpcd, pPCD_IsoOutIncpltCallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + /* Update the error code */ + hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; + + return HAL_ERROR; + } + + /* Process locked */ + __HAL_LOCK(hpcd); + + if (hpcd->State == HAL_PCD_STATE_READY) + { + hpcd->ISOOUTIncompleteCallback = pCallback; + } + else + { + /* Update the error code */ + hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hpcd); + + return status; +} + +/** + * @brief UnRegister the USB PCD Iso OUT incomplete Callback + * USB PCD Iso OUT incomplete Callback is redirected to the weak HAL_PCD_ISOOUTIncompleteCallback() predefined callback + * @param hpcd PCD handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_UnRegisterIsoOutIncpltCallback(PCD_HandleTypeDef *hpcd) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Process locked */ + __HAL_LOCK(hpcd); + + if (hpcd->State == HAL_PCD_STATE_READY) + { + hpcd->ISOOUTIncompleteCallback = HAL_PCD_ISOOUTIncompleteCallback; /* Legacy weak ISOOUTIncompleteCallback */ + } + else + { + /* Update the error code */ + hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hpcd); + + return status; +} + +/** + * @brief Register USB PCD Iso IN incomplete Callback + * To be used instead of the weak HAL_PCD_ISOINIncompleteCallback() predefined callback + * @param hpcd PCD handle + * @param pCallback pointer to the USB PCD Iso IN incomplete Callback function + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_RegisterIsoInIncpltCallback(PCD_HandleTypeDef *hpcd, pPCD_IsoInIncpltCallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + /* Update the error code */ + hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; + + return HAL_ERROR; + } + + /* Process locked */ + __HAL_LOCK(hpcd); + + if (hpcd->State == HAL_PCD_STATE_READY) + { + hpcd->ISOINIncompleteCallback = pCallback; + } + else + { + /* Update the error code */ + hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hpcd); + + return status; +} + +/** + * @brief UnRegister the USB PCD Iso IN incomplete Callback + * USB PCD Iso IN incomplete Callback is redirected to the weak HAL_PCD_ISOINIncompleteCallback() predefined callback + * @param hpcd PCD handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_UnRegisterIsoInIncpltCallback(PCD_HandleTypeDef *hpcd) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Process locked */ + __HAL_LOCK(hpcd); + + if (hpcd->State == HAL_PCD_STATE_READY) + { + hpcd->ISOINIncompleteCallback = HAL_PCD_ISOINIncompleteCallback; /* Legacy weak ISOINIncompleteCallback */ + } + else + { + /* Update the error code */ + hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hpcd); + + return status; +} + +/** + * @brief Register USB PCD BCD Callback + * To be used instead of the weak HAL_PCDEx_BCD_Callback() predefined callback + * @param hpcd PCD handle + * @param pCallback pointer to the USB PCD BCD Callback function + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_RegisterBcdCallback(PCD_HandleTypeDef *hpcd, pPCD_BcdCallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + /* Update the error code */ + hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; + + return HAL_ERROR; + } + + /* Process locked */ + __HAL_LOCK(hpcd); + + if (hpcd->State == HAL_PCD_STATE_READY) + { + hpcd->BCDCallback = pCallback; + } + else + { + /* Update the error code */ + hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hpcd); + + return status; +} + +/** + * @brief UnRegister the USB PCD BCD Callback + * USB BCD Callback is redirected to the weak HAL_PCDEx_BCD_Callback() predefined callback + * @param hpcd PCD handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_UnRegisterBcdCallback(PCD_HandleTypeDef *hpcd) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Process locked */ + __HAL_LOCK(hpcd); + + if (hpcd->State == HAL_PCD_STATE_READY) + { + hpcd->BCDCallback = HAL_PCDEx_BCD_Callback; /* Legacy weak HAL_PCDEx_BCD_Callback */ + } + else + { + /* Update the error code */ + hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hpcd); + + return status; +} + +/** + * @brief Register USB PCD LPM Callback + * To be used instead of the weak HAL_PCDEx_LPM_Callback() predefined callback + * @param hpcd PCD handle + * @param pCallback pointer to the USB PCD LPM Callback function + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_RegisterLpmCallback(PCD_HandleTypeDef *hpcd, pPCD_LpmCallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + /* Update the error code */ + hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; + + return HAL_ERROR; + } + + /* Process locked */ + __HAL_LOCK(hpcd); + + if (hpcd->State == HAL_PCD_STATE_READY) + { + hpcd->LPMCallback = pCallback; + } + else + { + /* Update the error code */ + hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hpcd); + + return status; +} + +/** + * @brief UnRegister the USB PCD LPM Callback + * USB LPM Callback is redirected to the weak HAL_PCDEx_LPM_Callback() predefined callback + * @param hpcd PCD handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_UnRegisterLpmCallback(PCD_HandleTypeDef *hpcd) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Process locked */ + __HAL_LOCK(hpcd); + + if (hpcd->State == HAL_PCD_STATE_READY) + { + hpcd->LPMCallback = HAL_PCDEx_LPM_Callback; /* Legacy weak HAL_PCDEx_LPM_Callback */ + } + else + { + /* Update the error code */ + hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hpcd); + + return status; +} +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/** @defgroup PCD_Exported_Functions_Group2 Input and Output operation functions + * @brief Data transfers functions + * +@verbatim + =============================================================================== + ##### IO operation functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to manage the PCD data + transfers. + +@endverbatim + * @{ + */ + +/** + * @brief Start the USB device + * @param hpcd PCD handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_Start(PCD_HandleTypeDef *hpcd) +{ +#if defined (USB_OTG_FS) || defined (USB_OTG_HS) + USB_OTG_GlobalTypeDef *USBx = hpcd->Instance; +#endif /* defined (USB_OTG_FS) || defined (USB_OTG_HS) */ + + __HAL_LOCK(hpcd); +#if defined (USB_OTG_FS) || defined (USB_OTG_HS) + if ((hpcd->Init.battery_charging_enable == 1U) && + (hpcd->Init.phy_itface != USB_OTG_ULPI_PHY)) + { + /* Enable USB Transceiver */ + USBx->GCCFG |= USB_OTG_GCCFG_PWRDWN; + } +#endif /* defined (USB_OTG_FS) || defined (USB_OTG_HS) */ + (void)USB_DevConnect(hpcd->Instance); + __HAL_PCD_ENABLE(hpcd); + __HAL_UNLOCK(hpcd); + return HAL_OK; +} + +/** + * @brief Stop the USB device. + * @param hpcd PCD handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_Stop(PCD_HandleTypeDef *hpcd) +{ + __HAL_LOCK(hpcd); + __HAL_PCD_DISABLE(hpcd); + + if (USB_StopDevice(hpcd->Instance) != HAL_OK) + { + __HAL_UNLOCK(hpcd); + return HAL_ERROR; + } + + (void)USB_DevDisconnect(hpcd->Instance); + __HAL_UNLOCK(hpcd); + + return HAL_OK; +} +#if defined (USB_OTG_FS) || defined (USB_OTG_HS) +/** + * @brief Handles PCD interrupt request. + * @param hpcd PCD handle + * @retval HAL status + */ +void HAL_PCD_IRQHandler(PCD_HandleTypeDef *hpcd) +{ + USB_OTG_GlobalTypeDef *USBx = hpcd->Instance; + uint32_t USBx_BASE = (uint32_t)USBx; + uint32_t i, ep_intr, epint, epnum; + uint32_t fifoemptymsk, temp; + USB_OTG_EPTypeDef *ep; + + /* ensure that we are in device mode */ + if (USB_GetMode(hpcd->Instance) == USB_OTG_MODE_DEVICE) + { + /* avoid spurious interrupt */ + if (__HAL_PCD_IS_INVALID_INTERRUPT(hpcd)) + { + return; + } + + if (__HAL_PCD_GET_FLAG(hpcd, USB_OTG_GINTSTS_MMIS)) + { + /* incorrect mode, acknowledge the interrupt */ + __HAL_PCD_CLEAR_FLAG(hpcd, USB_OTG_GINTSTS_MMIS); + } + + if (__HAL_PCD_GET_FLAG(hpcd, USB_OTG_GINTSTS_OEPINT)) + { + epnum = 0U; + + /* Read in the device interrupt bits */ + ep_intr = USB_ReadDevAllOutEpInterrupt(hpcd->Instance); + + while (ep_intr != 0U) + { + if ((ep_intr & 0x1U) != 0U) + { + epint = USB_ReadDevOutEPInterrupt(hpcd->Instance, (uint8_t)epnum); + + if ((epint & USB_OTG_DOEPINT_XFRC) == USB_OTG_DOEPINT_XFRC) + { + CLEAR_OUT_EP_INTR(epnum, USB_OTG_DOEPINT_XFRC); + (void)PCD_EP_OutXfrComplete_int(hpcd, epnum); + } + + if ((epint & USB_OTG_DOEPINT_STUP) == USB_OTG_DOEPINT_STUP) + { + /* Class B setup phase done for previous decoded setup */ + (void)PCD_EP_OutSetupPacket_int(hpcd, epnum); + CLEAR_OUT_EP_INTR(epnum, USB_OTG_DOEPINT_STUP); + } + + if ((epint & USB_OTG_DOEPINT_OTEPDIS) == USB_OTG_DOEPINT_OTEPDIS) + { + CLEAR_OUT_EP_INTR(epnum, USB_OTG_DOEPINT_OTEPDIS); + } + + /* Clear Status Phase Received interrupt */ + if ((epint & USB_OTG_DOEPINT_OTEPSPR) == USB_OTG_DOEPINT_OTEPSPR) + { + if (hpcd->Init.dma_enable == 1U) + { + (void)USB_EP0_OutStart(hpcd->Instance, 1U, (uint8_t *)hpcd->Setup); + } + CLEAR_OUT_EP_INTR(epnum, USB_OTG_DOEPINT_OTEPSPR); + } + + /* Clear OUT NAK interrupt */ + if ((epint & USB_OTG_DOEPINT_NAK) == USB_OTG_DOEPINT_NAK) + { + CLEAR_OUT_EP_INTR(epnum, USB_OTG_DOEPINT_NAK); + } + } + epnum++; + ep_intr >>= 1U; + } + } + + if (__HAL_PCD_GET_FLAG(hpcd, USB_OTG_GINTSTS_IEPINT)) + { + /* Read in the device interrupt bits */ + ep_intr = USB_ReadDevAllInEpInterrupt(hpcd->Instance); + + epnum = 0U; + + while (ep_intr != 0U) + { + if ((ep_intr & 0x1U) != 0U) /* In ITR */ + { + epint = USB_ReadDevInEPInterrupt(hpcd->Instance, (uint8_t)epnum); + + if ((epint & USB_OTG_DIEPINT_XFRC) == USB_OTG_DIEPINT_XFRC) + { + fifoemptymsk = (uint32_t)(0x1UL << (epnum & EP_ADDR_MSK)); + USBx_DEVICE->DIEPEMPMSK &= ~fifoemptymsk; + + CLEAR_IN_EP_INTR(epnum, USB_OTG_DIEPINT_XFRC); + + if (hpcd->Init.dma_enable == 1U) + { + hpcd->IN_ep[epnum].xfer_buff += hpcd->IN_ep[epnum].maxpacket; + } + +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) + hpcd->DataInStageCallback(hpcd, (uint8_t)epnum); +#else + HAL_PCD_DataInStageCallback(hpcd, (uint8_t)epnum); +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ + + if (hpcd->Init.dma_enable == 1U) + { + /* this is ZLP, so prepare EP0 for next setup */ + if ((epnum == 0U) && (hpcd->IN_ep[epnum].xfer_len == 0U)) + { + /* prepare to rx more setup packets */ + (void)USB_EP0_OutStart(hpcd->Instance, 1U, (uint8_t *)hpcd->Setup); + } + } + } + if ((epint & USB_OTG_DIEPINT_TOC) == USB_OTG_DIEPINT_TOC) + { + CLEAR_IN_EP_INTR(epnum, USB_OTG_DIEPINT_TOC); + } + if ((epint & USB_OTG_DIEPINT_ITTXFE) == USB_OTG_DIEPINT_ITTXFE) + { + CLEAR_IN_EP_INTR(epnum, USB_OTG_DIEPINT_ITTXFE); + } + if ((epint & USB_OTG_DIEPINT_INEPNE) == USB_OTG_DIEPINT_INEPNE) + { + CLEAR_IN_EP_INTR(epnum, USB_OTG_DIEPINT_INEPNE); + } + if ((epint & USB_OTG_DIEPINT_EPDISD) == USB_OTG_DIEPINT_EPDISD) + { + CLEAR_IN_EP_INTR(epnum, USB_OTG_DIEPINT_EPDISD); + } + if ((epint & USB_OTG_DIEPINT_TXFE) == USB_OTG_DIEPINT_TXFE) + { + (void)PCD_WriteEmptyTxFifo(hpcd, epnum); + } + } + epnum++; + ep_intr >>= 1U; + } + } + + /* Handle Resume Interrupt */ + if (__HAL_PCD_GET_FLAG(hpcd, USB_OTG_GINTSTS_WKUINT)) + { + /* Clear the Remote Wake-up Signaling */ + USBx_DEVICE->DCTL &= ~USB_OTG_DCTL_RWUSIG; + + if (hpcd->LPM_State == LPM_L1) + { + hpcd->LPM_State = LPM_L0; + +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) + hpcd->LPMCallback(hpcd, PCD_LPM_L0_ACTIVE); +#else + HAL_PCDEx_LPM_Callback(hpcd, PCD_LPM_L0_ACTIVE); +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ + } + else + { +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) + hpcd->ResumeCallback(hpcd); +#else + HAL_PCD_ResumeCallback(hpcd); +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ + } + + __HAL_PCD_CLEAR_FLAG(hpcd, USB_OTG_GINTSTS_WKUINT); + } + + /* Handle Suspend Interrupt */ + if (__HAL_PCD_GET_FLAG(hpcd, USB_OTG_GINTSTS_USBSUSP)) + { + if ((USBx_DEVICE->DSTS & USB_OTG_DSTS_SUSPSTS) == USB_OTG_DSTS_SUSPSTS) + { +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) + hpcd->SuspendCallback(hpcd); +#else + HAL_PCD_SuspendCallback(hpcd); +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ + } + __HAL_PCD_CLEAR_FLAG(hpcd, USB_OTG_GINTSTS_USBSUSP); + } + #if defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx) + /* Handle LPM Interrupt */ + if (__HAL_PCD_GET_FLAG(hpcd, USB_OTG_GINTSTS_LPMINT)) + { + __HAL_PCD_CLEAR_FLAG(hpcd, USB_OTG_GINTSTS_LPMINT); + + if (hpcd->LPM_State == LPM_L0) + { + hpcd->LPM_State = LPM_L1; + hpcd->BESL = (hpcd->Instance->GLPMCFG & USB_OTG_GLPMCFG_BESL) >> 2U; + +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) + hpcd->LPMCallback(hpcd, PCD_LPM_L1_ACTIVE); +#else + HAL_PCDEx_LPM_Callback(hpcd, PCD_LPM_L1_ACTIVE); +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ + } + else + { +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) + hpcd->SuspendCallback(hpcd); +#else + HAL_PCD_SuspendCallback(hpcd); +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ + } + } + #endif /* defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx) */ + /* Handle Reset Interrupt */ + if (__HAL_PCD_GET_FLAG(hpcd, USB_OTG_GINTSTS_USBRST)) + { + USBx_DEVICE->DCTL &= ~USB_OTG_DCTL_RWUSIG; + (void)USB_FlushTxFifo(hpcd->Instance, 0x10U); + + for (i = 0U; i < hpcd->Init.dev_endpoints; i++) + { + USBx_INEP(i)->DIEPINT = 0xFB7FU; + USBx_INEP(i)->DIEPCTL &= ~USB_OTG_DIEPCTL_STALL; + USBx_OUTEP(i)->DOEPINT = 0xFB7FU; + USBx_OUTEP(i)->DOEPCTL &= ~USB_OTG_DOEPCTL_STALL; + } + USBx_DEVICE->DAINTMSK |= 0x10001U; + + if (hpcd->Init.use_dedicated_ep1 != 0U) + { + USBx_DEVICE->DOUTEP1MSK |= USB_OTG_DOEPMSK_STUPM | + USB_OTG_DOEPMSK_XFRCM | + USB_OTG_DOEPMSK_EPDM; + + USBx_DEVICE->DINEP1MSK |= USB_OTG_DIEPMSK_TOM | + USB_OTG_DIEPMSK_XFRCM | + USB_OTG_DIEPMSK_EPDM; + } + else + { + USBx_DEVICE->DOEPMSK |= USB_OTG_DOEPMSK_STUPM | + USB_OTG_DOEPMSK_XFRCM | + USB_OTG_DOEPMSK_EPDM | + USB_OTG_DOEPMSK_OTEPSPRM | + USB_OTG_DOEPMSK_NAKM; + + USBx_DEVICE->DIEPMSK |= USB_OTG_DIEPMSK_TOM | + USB_OTG_DIEPMSK_XFRCM | + USB_OTG_DIEPMSK_EPDM; + } + + /* Set Default Address to 0 */ + USBx_DEVICE->DCFG &= ~USB_OTG_DCFG_DAD; + + /* setup EP0 to receive SETUP packets */ + (void)USB_EP0_OutStart(hpcd->Instance, (uint8_t)hpcd->Init.dma_enable, + (uint8_t *)hpcd->Setup); + + __HAL_PCD_CLEAR_FLAG(hpcd, USB_OTG_GINTSTS_USBRST); + } + + /* Handle Enumeration done Interrupt */ + if (__HAL_PCD_GET_FLAG(hpcd, USB_OTG_GINTSTS_ENUMDNE)) + { + (void)USB_ActivateSetup(hpcd->Instance); + hpcd->Init.speed = USB_GetDevSpeed(hpcd->Instance); + + /* Set USB Turnaround time */ + (void)USB_SetTurnaroundTime(hpcd->Instance, + HAL_RCC_GetHCLKFreq(), + (uint8_t)hpcd->Init.speed); + +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) + hpcd->ResetCallback(hpcd); +#else + HAL_PCD_ResetCallback(hpcd); +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ + + __HAL_PCD_CLEAR_FLAG(hpcd, USB_OTG_GINTSTS_ENUMDNE); + } + + /* Handle RxQLevel Interrupt */ + if (__HAL_PCD_GET_FLAG(hpcd, USB_OTG_GINTSTS_RXFLVL)) + { + USB_MASK_INTERRUPT(hpcd->Instance, USB_OTG_GINTSTS_RXFLVL); + + temp = USBx->GRXSTSP; + + ep = &hpcd->OUT_ep[temp & USB_OTG_GRXSTSP_EPNUM]; + + if (((temp & USB_OTG_GRXSTSP_PKTSTS) >> 17) == STS_DATA_UPDT) + { + if ((temp & USB_OTG_GRXSTSP_BCNT) != 0U) + { + (void)USB_ReadPacket(USBx, ep->xfer_buff, + (uint16_t)((temp & USB_OTG_GRXSTSP_BCNT) >> 4)); + + ep->xfer_buff += (temp & USB_OTG_GRXSTSP_BCNT) >> 4; + ep->xfer_count += (temp & USB_OTG_GRXSTSP_BCNT) >> 4; + } + } + else if (((temp & USB_OTG_GRXSTSP_PKTSTS) >> 17) == STS_SETUP_UPDT) + { + (void)USB_ReadPacket(USBx, (uint8_t *)hpcd->Setup, 8U); + ep->xfer_count += (temp & USB_OTG_GRXSTSP_BCNT) >> 4; + } + else + { + /* ... */ + } + USB_UNMASK_INTERRUPT(hpcd->Instance, USB_OTG_GINTSTS_RXFLVL); + } + + /* Handle SOF Interrupt */ + if (__HAL_PCD_GET_FLAG(hpcd, USB_OTG_GINTSTS_SOF)) + { +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) + hpcd->SOFCallback(hpcd); +#else + HAL_PCD_SOFCallback(hpcd); +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ + + __HAL_PCD_CLEAR_FLAG(hpcd, USB_OTG_GINTSTS_SOF); + } + + /* Handle Incomplete ISO IN Interrupt */ + if (__HAL_PCD_GET_FLAG(hpcd, USB_OTG_GINTSTS_IISOIXFR)) + { + /* Keep application checking the corresponding Iso IN endpoint + causing the incomplete Interrupt */ + epnum = 0U; + +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) + hpcd->ISOINIncompleteCallback(hpcd, (uint8_t)epnum); +#else + HAL_PCD_ISOINIncompleteCallback(hpcd, (uint8_t)epnum); +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ + + __HAL_PCD_CLEAR_FLAG(hpcd, USB_OTG_GINTSTS_IISOIXFR); + } + + /* Handle Incomplete ISO OUT Interrupt */ + if (__HAL_PCD_GET_FLAG(hpcd, USB_OTG_GINTSTS_PXFR_INCOMPISOOUT)) + { + /* Keep application checking the corresponding Iso OUT endpoint + causing the incomplete Interrupt */ + epnum = 0U; + +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) + hpcd->ISOOUTIncompleteCallback(hpcd, (uint8_t)epnum); +#else + HAL_PCD_ISOOUTIncompleteCallback(hpcd, (uint8_t)epnum); +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ + + __HAL_PCD_CLEAR_FLAG(hpcd, USB_OTG_GINTSTS_PXFR_INCOMPISOOUT); + } + + /* Handle Connection event Interrupt */ + if (__HAL_PCD_GET_FLAG(hpcd, USB_OTG_GINTSTS_SRQINT)) + { +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) + hpcd->ConnectCallback(hpcd); +#else + HAL_PCD_ConnectCallback(hpcd); +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ + + __HAL_PCD_CLEAR_FLAG(hpcd, USB_OTG_GINTSTS_SRQINT); + } + + /* Handle Disconnection event Interrupt */ + if (__HAL_PCD_GET_FLAG(hpcd, USB_OTG_GINTSTS_OTGINT)) + { + temp = hpcd->Instance->GOTGINT; + + if ((temp & USB_OTG_GOTGINT_SEDET) == USB_OTG_GOTGINT_SEDET) + { +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) + hpcd->DisconnectCallback(hpcd); +#else + HAL_PCD_DisconnectCallback(hpcd); +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ + } + hpcd->Instance->GOTGINT |= temp; + } + } +} +#endif /* defined (USB_OTG_FS) || defined (USB_OTG_HS) */ + + +/** + * @brief Data OUT stage callback. + * @param hpcd PCD handle + * @param epnum endpoint number + * @retval None + */ +__weak void HAL_PCD_DataOutStageCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hpcd); + UNUSED(epnum); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_PCD_DataOutStageCallback could be implemented in the user file + */ +} + +/** + * @brief Data IN stage callback + * @param hpcd PCD handle + * @param epnum endpoint number + * @retval None + */ +__weak void HAL_PCD_DataInStageCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hpcd); + UNUSED(epnum); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_PCD_DataInStageCallback could be implemented in the user file + */ +} +/** + * @brief Setup stage callback + * @param hpcd PCD handle + * @retval None + */ +__weak void HAL_PCD_SetupStageCallback(PCD_HandleTypeDef *hpcd) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hpcd); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_PCD_SetupStageCallback could be implemented in the user file + */ +} + +/** + * @brief USB Start Of Frame callback. + * @param hpcd PCD handle + * @retval None + */ +__weak void HAL_PCD_SOFCallback(PCD_HandleTypeDef *hpcd) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hpcd); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_PCD_SOFCallback could be implemented in the user file + */ +} + +/** + * @brief USB Reset callback. + * @param hpcd PCD handle + * @retval None + */ +__weak void HAL_PCD_ResetCallback(PCD_HandleTypeDef *hpcd) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hpcd); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_PCD_ResetCallback could be implemented in the user file + */ +} + +/** + * @brief Suspend event callback. + * @param hpcd PCD handle + * @retval None + */ +__weak void HAL_PCD_SuspendCallback(PCD_HandleTypeDef *hpcd) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hpcd); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_PCD_SuspendCallback could be implemented in the user file + */ +} + +/** + * @brief Resume event callback. + * @param hpcd PCD handle + * @retval None + */ +__weak void HAL_PCD_ResumeCallback(PCD_HandleTypeDef *hpcd) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hpcd); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_PCD_ResumeCallback could be implemented in the user file + */ +} + +/** + * @brief Incomplete ISO OUT callback. + * @param hpcd PCD handle + * @param epnum endpoint number + * @retval None + */ +__weak void HAL_PCD_ISOOUTIncompleteCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hpcd); + UNUSED(epnum); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_PCD_ISOOUTIncompleteCallback could be implemented in the user file + */ +} + +/** + * @brief Incomplete ISO IN callback. + * @param hpcd PCD handle + * @param epnum endpoint number + * @retval None + */ +__weak void HAL_PCD_ISOINIncompleteCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hpcd); + UNUSED(epnum); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_PCD_ISOINIncompleteCallback could be implemented in the user file + */ +} + +/** + * @brief Connection event callback. + * @param hpcd PCD handle + * @retval None + */ +__weak void HAL_PCD_ConnectCallback(PCD_HandleTypeDef *hpcd) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hpcd); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_PCD_ConnectCallback could be implemented in the user file + */ +} + +/** + * @brief Disconnection event callback. + * @param hpcd PCD handle + * @retval None + */ +__weak void HAL_PCD_DisconnectCallback(PCD_HandleTypeDef *hpcd) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hpcd); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_PCD_DisconnectCallback could be implemented in the user file + */ +} + +/** + * @} + */ + +/** @defgroup PCD_Exported_Functions_Group3 Peripheral Control functions + * @brief management functions + * +@verbatim + =============================================================================== + ##### Peripheral Control functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to control the PCD data + transfers. + +@endverbatim + * @{ + */ + +/** + * @brief Connect the USB device + * @param hpcd PCD handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_DevConnect(PCD_HandleTypeDef *hpcd) +{ +#if defined (USB_OTG_FS) || defined (USB_OTG_HS) + USB_OTG_GlobalTypeDef *USBx = hpcd->Instance; +#endif /* defined (USB_OTG_FS) || defined (USB_OTG_HS) */ + + __HAL_LOCK(hpcd); +#if defined (USB_OTG_FS) || defined (USB_OTG_HS) + if ((hpcd->Init.battery_charging_enable == 1U) && + (hpcd->Init.phy_itface != USB_OTG_ULPI_PHY)) + { + /* Enable USB Transceiver */ + USBx->GCCFG |= USB_OTG_GCCFG_PWRDWN; + } +#endif /* defined (USB_OTG_FS) || defined (USB_OTG_HS) */ + (void)USB_DevConnect(hpcd->Instance); + __HAL_UNLOCK(hpcd); + return HAL_OK; +} + +/** + * @brief Disconnect the USB device. + * @param hpcd PCD handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_DevDisconnect(PCD_HandleTypeDef *hpcd) +{ + __HAL_LOCK(hpcd); + (void)USB_DevDisconnect(hpcd->Instance); + __HAL_UNLOCK(hpcd); + return HAL_OK; +} + +/** + * @brief Set the USB Device address. + * @param hpcd PCD handle + * @param address new device address + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_SetAddress(PCD_HandleTypeDef *hpcd, uint8_t address) +{ + __HAL_LOCK(hpcd); + hpcd->USB_Address = address; + (void)USB_SetDevAddress(hpcd->Instance, address); + __HAL_UNLOCK(hpcd); + return HAL_OK; +} +/** + * @brief Open and configure an endpoint. + * @param hpcd PCD handle + * @param ep_addr endpoint address + * @param ep_mps endpoint max packet size + * @param ep_type endpoint type + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_EP_Open(PCD_HandleTypeDef *hpcd, uint8_t ep_addr, uint16_t ep_mps, uint8_t ep_type) +{ + HAL_StatusTypeDef ret = HAL_OK; + PCD_EPTypeDef *ep; + + if ((ep_addr & 0x80U) == 0x80U) + { + ep = &hpcd->IN_ep[ep_addr & EP_ADDR_MSK]; + ep->is_in = 1U; + } + else + { + ep = &hpcd->OUT_ep[ep_addr & EP_ADDR_MSK]; + ep->is_in = 0U; + } + + ep->num = ep_addr & EP_ADDR_MSK; + ep->maxpacket = ep_mps; + ep->type = ep_type; + + if (ep->is_in != 0U) + { + /* Assign a Tx FIFO */ + ep->tx_fifo_num = ep->num; + } + /* Set initial data PID. */ + if (ep_type == EP_TYPE_BULK) + { + ep->data_pid_start = 0U; + } + + __HAL_LOCK(hpcd); + (void)USB_ActivateEndpoint(hpcd->Instance, ep); + __HAL_UNLOCK(hpcd); + + return ret; +} + +/** + * @brief Deactivate an endpoint. + * @param hpcd PCD handle + * @param ep_addr endpoint address + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_EP_Close(PCD_HandleTypeDef *hpcd, uint8_t ep_addr) +{ + PCD_EPTypeDef *ep; + + if ((ep_addr & 0x80U) == 0x80U) + { + ep = &hpcd->IN_ep[ep_addr & EP_ADDR_MSK]; + ep->is_in = 1U; + } + else + { + ep = &hpcd->OUT_ep[ep_addr & EP_ADDR_MSK]; + ep->is_in = 0U; + } + ep->num = ep_addr & EP_ADDR_MSK; + + __HAL_LOCK(hpcd); + (void)USB_DeactivateEndpoint(hpcd->Instance, ep); + __HAL_UNLOCK(hpcd); + return HAL_OK; +} + + +/** + * @brief Receive an amount of data. + * @param hpcd PCD handle + * @param ep_addr endpoint address + * @param pBuf pointer to the reception buffer + * @param len amount of data to be received + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_EP_Receive(PCD_HandleTypeDef *hpcd, uint8_t ep_addr, uint8_t *pBuf, uint32_t len) +{ + PCD_EPTypeDef *ep; + + ep = &hpcd->OUT_ep[ep_addr & EP_ADDR_MSK]; + + /*setup and start the Xfer */ + ep->xfer_buff = pBuf; + ep->xfer_len = len; + ep->xfer_count = 0U; + ep->is_in = 0U; + ep->num = ep_addr & EP_ADDR_MSK; + + if (hpcd->Init.dma_enable == 1U) + { + ep->dma_addr = (uint32_t)pBuf; + } + + if ((ep_addr & EP_ADDR_MSK) == 0U) + { + (void)USB_EP0StartXfer(hpcd->Instance, ep, (uint8_t)hpcd->Init.dma_enable); + } + else + { + (void)USB_EPStartXfer(hpcd->Instance, ep, (uint8_t)hpcd->Init.dma_enable); + } + + return HAL_OK; +} + +/** + * @brief Get Received Data Size + * @param hpcd PCD handle + * @param ep_addr endpoint address + * @retval Data Size + */ +uint32_t HAL_PCD_EP_GetRxCount(PCD_HandleTypeDef *hpcd, uint8_t ep_addr) +{ + return hpcd->OUT_ep[ep_addr & EP_ADDR_MSK].xfer_count; +} +/** + * @brief Send an amount of data + * @param hpcd PCD handle + * @param ep_addr endpoint address + * @param pBuf pointer to the transmission buffer + * @param len amount of data to be sent + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_EP_Transmit(PCD_HandleTypeDef *hpcd, uint8_t ep_addr, uint8_t *pBuf, uint32_t len) +{ + PCD_EPTypeDef *ep; + + ep = &hpcd->IN_ep[ep_addr & EP_ADDR_MSK]; + + /*setup and start the Xfer */ + ep->xfer_buff = pBuf; + ep->xfer_len = len; + ep->xfer_count = 0U; + ep->is_in = 1U; + ep->num = ep_addr & EP_ADDR_MSK; + + if (hpcd->Init.dma_enable == 1U) + { + ep->dma_addr = (uint32_t)pBuf; + } + + if ((ep_addr & EP_ADDR_MSK) == 0U) + { + (void)USB_EP0StartXfer(hpcd->Instance, ep, (uint8_t)hpcd->Init.dma_enable); + } + else + { + (void)USB_EPStartXfer(hpcd->Instance, ep, (uint8_t)hpcd->Init.dma_enable); + } + + return HAL_OK; +} + +/** + * @brief Set a STALL condition over an endpoint + * @param hpcd PCD handle + * @param ep_addr endpoint address + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_EP_SetStall(PCD_HandleTypeDef *hpcd, uint8_t ep_addr) +{ + PCD_EPTypeDef *ep; + + if (((uint32_t)ep_addr & EP_ADDR_MSK) > hpcd->Init.dev_endpoints) + { + return HAL_ERROR; + } + + if ((0x80U & ep_addr) == 0x80U) + { + ep = &hpcd->IN_ep[ep_addr & EP_ADDR_MSK]; + ep->is_in = 1U; + } + else + { + ep = &hpcd->OUT_ep[ep_addr]; + ep->is_in = 0U; + } + + ep->is_stall = 1U; + ep->num = ep_addr & EP_ADDR_MSK; + + __HAL_LOCK(hpcd); + + (void)USB_EPSetStall(hpcd->Instance, ep); + if ((ep_addr & EP_ADDR_MSK) == 0U) + { + (void)USB_EP0_OutStart(hpcd->Instance, (uint8_t)hpcd->Init.dma_enable, (uint8_t *)hpcd->Setup); + } + __HAL_UNLOCK(hpcd); + + return HAL_OK; +} + +/** + * @brief Clear a STALL condition over in an endpoint + * @param hpcd PCD handle + * @param ep_addr endpoint address + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_EP_ClrStall(PCD_HandleTypeDef *hpcd, uint8_t ep_addr) +{ + PCD_EPTypeDef *ep; + + if (((uint32_t)ep_addr & 0x0FU) > hpcd->Init.dev_endpoints) + { + return HAL_ERROR; + } + + if ((0x80U & ep_addr) == 0x80U) + { + ep = &hpcd->IN_ep[ep_addr & EP_ADDR_MSK]; + ep->is_in = 1U; + } + else + { + ep = &hpcd->OUT_ep[ep_addr & EP_ADDR_MSK]; + ep->is_in = 0U; + } + + ep->is_stall = 0U; + ep->num = ep_addr & EP_ADDR_MSK; + + __HAL_LOCK(hpcd); + (void)USB_EPClearStall(hpcd->Instance, ep); + __HAL_UNLOCK(hpcd); + + return HAL_OK; +} + +/** + * @brief Flush an endpoint + * @param hpcd PCD handle + * @param ep_addr endpoint address + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_EP_Flush(PCD_HandleTypeDef *hpcd, uint8_t ep_addr) +{ + __HAL_LOCK(hpcd); + + if ((ep_addr & 0x80U) == 0x80U) + { + (void)USB_FlushTxFifo(hpcd->Instance, (uint32_t)ep_addr & EP_ADDR_MSK); + } + else + { + (void)USB_FlushRxFifo(hpcd->Instance); + } + + __HAL_UNLOCK(hpcd); + + return HAL_OK; +} + +/** + * @brief Activate remote wakeup signalling + * @param hpcd PCD handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_ActivateRemoteWakeup(PCD_HandleTypeDef *hpcd) +{ + return (USB_ActivateRemoteWakeup(hpcd->Instance)); +} + +/** + * @brief De-activate remote wakeup signalling. + * @param hpcd PCD handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_DeActivateRemoteWakeup(PCD_HandleTypeDef *hpcd) +{ + return (USB_DeActivateRemoteWakeup(hpcd->Instance)); +} + +/** + * @} + */ + +/** @defgroup PCD_Exported_Functions_Group4 Peripheral State functions + * @brief Peripheral State functions + * +@verbatim + =============================================================================== + ##### Peripheral State functions ##### + =============================================================================== + [..] + This subsection permits to get in run-time the status of the peripheral + and the data flow. + +@endverbatim + * @{ + */ + +/** + * @brief Return the PCD handle state. + * @param hpcd PCD handle + * @retval HAL state + */ +PCD_StateTypeDef HAL_PCD_GetState(PCD_HandleTypeDef *hpcd) +{ + return hpcd->State; +} + +/** + * @} + */ + +/** + * @} + */ + +/* Private functions ---------------------------------------------------------*/ +/** @addtogroup PCD_Private_Functions + * @{ + */ +#if defined (USB_OTG_FS) || defined (USB_OTG_HS) +/** + * @brief Check FIFO for the next packet to be loaded. + * @param hpcd PCD handle + * @param epnum endpoint number + * @retval HAL status + */ +static HAL_StatusTypeDef PCD_WriteEmptyTxFifo(PCD_HandleTypeDef *hpcd, uint32_t epnum) +{ + USB_OTG_GlobalTypeDef *USBx = hpcd->Instance; + uint32_t USBx_BASE = (uint32_t)USBx; + USB_OTG_EPTypeDef *ep; + uint32_t len; + uint32_t len32b; + uint32_t fifoemptymsk; + + ep = &hpcd->IN_ep[epnum]; + + if (ep->xfer_count > ep->xfer_len) + { + return HAL_ERROR; + } + + len = ep->xfer_len - ep->xfer_count; + + if (len > ep->maxpacket) + { + len = ep->maxpacket; + } + + len32b = (len + 3U) / 4U; + + while (((USBx_INEP(epnum)->DTXFSTS & USB_OTG_DTXFSTS_INEPTFSAV) >= len32b) && + (ep->xfer_count < ep->xfer_len) && (ep->xfer_len != 0U)) + { + /* Write the FIFO */ + len = ep->xfer_len - ep->xfer_count; + + if (len > ep->maxpacket) + { + len = ep->maxpacket; + } + len32b = (len + 3U) / 4U; + + (void)USB_WritePacket(USBx, ep->xfer_buff, (uint8_t)epnum, (uint16_t)len, + (uint8_t)hpcd->Init.dma_enable); + + ep->xfer_buff += len; + ep->xfer_count += len; + } + + if (ep->xfer_len <= ep->xfer_count) + { + fifoemptymsk = (uint32_t)(0x1UL << (epnum & EP_ADDR_MSK)); + USBx_DEVICE->DIEPEMPMSK &= ~fifoemptymsk; + } + + return HAL_OK; +} + + +/** + * @brief process EP OUT transfer complete interrupt. + * @param hpcd PCD handle + * @param epnum endpoint number + * @retval HAL status + */ +static HAL_StatusTypeDef PCD_EP_OutXfrComplete_int(PCD_HandleTypeDef *hpcd, uint32_t epnum) +{ + USB_OTG_GlobalTypeDef *USBx = hpcd->Instance; + uint32_t USBx_BASE = (uint32_t)USBx; + uint32_t gSNPSiD = *(__IO uint32_t *)(&USBx->CID + 0x1U); + uint32_t DoepintReg = USBx_OUTEP(epnum)->DOEPINT; + + if (hpcd->Init.dma_enable == 1U) + { + if ((DoepintReg & USB_OTG_DOEPINT_STUP) == USB_OTG_DOEPINT_STUP) /* Class C */ + { + /* StupPktRcvd = 1 this is a setup packet */ + if ((gSNPSiD > USB_OTG_CORE_ID_300A) && + ((DoepintReg & USB_OTG_DOEPINT_STPKTRX) == USB_OTG_DOEPINT_STPKTRX)) + { + CLEAR_OUT_EP_INTR(epnum, USB_OTG_DOEPINT_STPKTRX); + } + + /* Inform the upper layer that a setup packet is available */ +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) + hpcd->SetupStageCallback(hpcd); +#else + HAL_PCD_SetupStageCallback(hpcd); +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ + + (void)USB_EP0_OutStart(hpcd->Instance, 1U, (uint8_t *)hpcd->Setup); + CLEAR_OUT_EP_INTR(epnum, USB_OTG_DOEPINT_STUP); + } + else if ((DoepintReg & USB_OTG_DOEPINT_OTEPSPR) == USB_OTG_DOEPINT_OTEPSPR) /* Class E */ + { + CLEAR_OUT_EP_INTR(epnum, USB_OTG_DOEPINT_OTEPSPR); + } + else if ((DoepintReg & (USB_OTG_DOEPINT_STUP | USB_OTG_DOEPINT_OTEPSPR)) == 0U) + { + /* StupPktRcvd = 1 this is a setup packet */ + if ((gSNPSiD > USB_OTG_CORE_ID_300A) && + ((DoepintReg & USB_OTG_DOEPINT_STPKTRX) == USB_OTG_DOEPINT_STPKTRX)) + { + CLEAR_OUT_EP_INTR(epnum, USB_OTG_DOEPINT_STPKTRX); + } + else + { + /* out data packet received over EP0 */ + hpcd->OUT_ep[epnum].xfer_count = + hpcd->OUT_ep[epnum].maxpacket - + (USBx_OUTEP(epnum)->DOEPTSIZ & USB_OTG_DOEPTSIZ_XFRSIZ); + + hpcd->OUT_ep[epnum].xfer_buff += hpcd->OUT_ep[epnum].maxpacket; + +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) + hpcd->DataOutStageCallback(hpcd, (uint8_t)epnum); +#else + HAL_PCD_DataOutStageCallback(hpcd, (uint8_t)epnum); +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ + + if ((epnum == 0U) && (hpcd->OUT_ep[epnum].xfer_len == 0U)) + { + /* this is ZLP, so prepare EP0 for next setup */ + (void)USB_EP0_OutStart(hpcd->Instance, 1U, (uint8_t *)hpcd->Setup); + } + } + } + else + { + /* ... */ + } + } + else + { + if (gSNPSiD == USB_OTG_CORE_ID_310A) + { + /* StupPktRcvd = 1 this is a setup packet */ + if ((DoepintReg & USB_OTG_DOEPINT_STPKTRX) == USB_OTG_DOEPINT_STPKTRX) + { + CLEAR_OUT_EP_INTR(epnum, USB_OTG_DOEPINT_STPKTRX); + } + else + { + if ((DoepintReg & USB_OTG_DOEPINT_OTEPSPR) == USB_OTG_DOEPINT_OTEPSPR) + { + CLEAR_OUT_EP_INTR(epnum, USB_OTG_DOEPINT_OTEPSPR); + } + +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) + hpcd->DataOutStageCallback(hpcd, (uint8_t)epnum); +#else + HAL_PCD_DataOutStageCallback(hpcd, (uint8_t)epnum); +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ + } + } + else + { +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) + hpcd->DataOutStageCallback(hpcd, (uint8_t)epnum); +#else + HAL_PCD_DataOutStageCallback(hpcd, (uint8_t)epnum); +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ + } + } + + return HAL_OK; +} + + +/** + * @brief process EP OUT setup packet received interrupt. + * @param hpcd PCD handle + * @param epnum endpoint number + * @retval HAL status + */ +static HAL_StatusTypeDef PCD_EP_OutSetupPacket_int(PCD_HandleTypeDef *hpcd, uint32_t epnum) +{ + USB_OTG_GlobalTypeDef *USBx = hpcd->Instance; + uint32_t USBx_BASE = (uint32_t)USBx; + uint32_t gSNPSiD = *(__IO uint32_t *)(&USBx->CID + 0x1U); + uint32_t DoepintReg = USBx_OUTEP(epnum)->DOEPINT; + + if (hpcd->Init.dma_enable == 1U) + { + /* StupPktRcvd = 1 pending setup packet int */ + if ((gSNPSiD > USB_OTG_CORE_ID_300A) && + ((DoepintReg & USB_OTG_DOEPINT_STPKTRX) == USB_OTG_DOEPINT_STPKTRX)) + { + CLEAR_OUT_EP_INTR(epnum, USB_OTG_DOEPINT_STPKTRX); + } + } + else + { + if ((gSNPSiD == USB_OTG_CORE_ID_310A) && + ((DoepintReg & USB_OTG_DOEPINT_STPKTRX) == USB_OTG_DOEPINT_STPKTRX)) + { + CLEAR_OUT_EP_INTR(epnum, USB_OTG_DOEPINT_STPKTRX); + } + } + + /* Inform the upper layer that a setup packet is available */ +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) + hpcd->SetupStageCallback(hpcd); +#else + HAL_PCD_SetupStageCallback(hpcd); +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ + + if ((gSNPSiD > USB_OTG_CORE_ID_300A) && (hpcd->Init.dma_enable == 1U)) + { + (void)USB_EP0_OutStart(hpcd->Instance, 1U, (uint8_t *)hpcd->Setup); + } + + return HAL_OK; +} +#endif /* defined (USB_OTG_FS) || defined (USB_OTG_HS) */ + + +/** + * @} + */ +#endif /* defined (USB_OTG_FS) || defined (USB_OTG_HS) */ +#endif /* HAL_PCD_MODULE_ENABLED */ + +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_pcd_ex.c b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_pcd_ex.c new file mode 100644 index 0000000..269fce7 --- /dev/null +++ b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_pcd_ex.c @@ -0,0 +1,348 @@ +/** + ****************************************************************************** + * @file stm32f4xx_hal_pcd_ex.c + * @author MCD Application Team + * @brief PCD Extended HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the USB Peripheral Controller: + * + Extended features functions + * + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f4xx_hal.h" + +/** @addtogroup STM32F4xx_HAL_Driver + * @{ + */ + +/** @defgroup PCDEx PCDEx + * @brief PCD Extended HAL module driver + * @{ + */ + +#ifdef HAL_PCD_MODULE_ENABLED + +#if defined (USB_OTG_FS) || defined (USB_OTG_HS) +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ +/* Private functions ---------------------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ + +/** @defgroup PCDEx_Exported_Functions PCDEx Exported Functions + * @{ + */ + +/** @defgroup PCDEx_Exported_Functions_Group1 Peripheral Control functions + * @brief PCDEx control functions + * +@verbatim + =============================================================================== + ##### Extended features functions ##### + =============================================================================== + [..] This section provides functions allowing to: + (+) Update FIFO configuration + +@endverbatim + * @{ + */ +#if defined (USB_OTG_FS) || defined (USB_OTG_HS) +/** + * @brief Set Tx FIFO + * @param hpcd PCD handle + * @param fifo The number of Tx fifo + * @param size Fifo size + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCDEx_SetTxFiFo(PCD_HandleTypeDef *hpcd, uint8_t fifo, uint16_t size) +{ + uint8_t i; + uint32_t Tx_Offset; + + /* TXn min size = 16 words. (n : Transmit FIFO index) + When a TxFIFO is not used, the Configuration should be as follows: + case 1 : n > m and Txn is not used (n,m : Transmit FIFO indexes) + --> Txm can use the space allocated for Txn. + case2 : n < m and Txn is not used (n,m : Transmit FIFO indexes) + --> Txn should be configured with the minimum space of 16 words + The FIFO is used optimally when used TxFIFOs are allocated in the top + of the FIFO.Ex: use EP1 and EP2 as IN instead of EP1 and EP3 as IN ones. + When DMA is used 3n * FIFO locations should be reserved for internal DMA registers */ + + Tx_Offset = hpcd->Instance->GRXFSIZ; + + if (fifo == 0U) + { + hpcd->Instance->DIEPTXF0_HNPTXFSIZ = ((uint32_t)size << 16) | Tx_Offset; + } + else + { + Tx_Offset += (hpcd->Instance->DIEPTXF0_HNPTXFSIZ) >> 16; + for (i = 0U; i < (fifo - 1U); i++) + { + Tx_Offset += (hpcd->Instance->DIEPTXF[i] >> 16); + } + + /* Multiply Tx_Size by 2 to get higher performance */ + hpcd->Instance->DIEPTXF[fifo - 1U] = ((uint32_t)size << 16) | Tx_Offset; + } + + return HAL_OK; +} + +/** + * @brief Set Rx FIFO + * @param hpcd PCD handle + * @param size Size of Rx fifo + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCDEx_SetRxFiFo(PCD_HandleTypeDef *hpcd, uint16_t size) +{ + hpcd->Instance->GRXFSIZ = size; + + return HAL_OK; +} +#if defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx) +/** + * @brief Activate LPM feature. + * @param hpcd PCD handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCDEx_ActivateLPM(PCD_HandleTypeDef *hpcd) +{ + USB_OTG_GlobalTypeDef *USBx = hpcd->Instance; + + hpcd->lpm_active = 1U; + hpcd->LPM_State = LPM_L0; + USBx->GINTMSK |= USB_OTG_GINTMSK_LPMINTM; + USBx->GLPMCFG |= (USB_OTG_GLPMCFG_LPMEN | USB_OTG_GLPMCFG_LPMACK | USB_OTG_GLPMCFG_ENBESL); + + return HAL_OK; +} + +/** + * @brief Deactivate LPM feature. + * @param hpcd PCD handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCDEx_DeActivateLPM(PCD_HandleTypeDef *hpcd) +{ + USB_OTG_GlobalTypeDef *USBx = hpcd->Instance; + + hpcd->lpm_active = 0U; + USBx->GINTMSK &= ~USB_OTG_GINTMSK_LPMINTM; + USBx->GLPMCFG &= ~(USB_OTG_GLPMCFG_LPMEN | USB_OTG_GLPMCFG_LPMACK | USB_OTG_GLPMCFG_ENBESL); + + return HAL_OK; +} +#endif /* defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx) */ +#if defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx) +/** + * @brief Handle BatteryCharging Process. + * @param hpcd PCD handle + * @retval HAL status + */ +void HAL_PCDEx_BCD_VBUSDetect(PCD_HandleTypeDef *hpcd) +{ + USB_OTG_GlobalTypeDef *USBx = hpcd->Instance; + uint32_t tickstart = HAL_GetTick(); + + /* Enable DCD : Data Contact Detect */ + USBx->GCCFG |= USB_OTG_GCCFG_DCDEN; + + /* Wait Detect flag or a timeout is happen*/ + while ((USBx->GCCFG & USB_OTG_GCCFG_DCDET) == 0U) + { + /* Check for the Timeout */ + if ((HAL_GetTick() - tickstart) > 1000U) + { +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) + hpcd->BCDCallback(hpcd, PCD_BCD_ERROR); +#else + HAL_PCDEx_BCD_Callback(hpcd, PCD_BCD_ERROR); +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ + + return; + } + } + + /* Right response got */ + HAL_Delay(200U); + + /* Check Detect flag*/ + if ((USBx->GCCFG & USB_OTG_GCCFG_DCDET) == USB_OTG_GCCFG_DCDET) + { +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) + hpcd->BCDCallback(hpcd, PCD_BCD_CONTACT_DETECTION); +#else + HAL_PCDEx_BCD_Callback(hpcd, PCD_BCD_CONTACT_DETECTION); +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ + } + + /*Primary detection: checks if connected to Standard Downstream Port + (without charging capability) */ + USBx->GCCFG &= ~ USB_OTG_GCCFG_DCDEN; + HAL_Delay(50U); + USBx->GCCFG |= USB_OTG_GCCFG_PDEN; + HAL_Delay(50U); + + if ((USBx->GCCFG & USB_OTG_GCCFG_PDET) == 0U) + { + /* Case of Standard Downstream Port */ +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) + hpcd->BCDCallback(hpcd, PCD_BCD_STD_DOWNSTREAM_PORT); +#else + HAL_PCDEx_BCD_Callback(hpcd, PCD_BCD_STD_DOWNSTREAM_PORT); +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ + } + else + { + /* start secondary detection to check connection to Charging Downstream + Port or Dedicated Charging Port */ + USBx->GCCFG &= ~ USB_OTG_GCCFG_PDEN; + HAL_Delay(50U); + USBx->GCCFG |= USB_OTG_GCCFG_SDEN; + HAL_Delay(50U); + + if ((USBx->GCCFG & USB_OTG_GCCFG_SDET) == USB_OTG_GCCFG_SDET) + { + /* case Dedicated Charging Port */ +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) + hpcd->BCDCallback(hpcd, PCD_BCD_DEDICATED_CHARGING_PORT); +#else + HAL_PCDEx_BCD_Callback(hpcd, PCD_BCD_DEDICATED_CHARGING_PORT); +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ + } + else + { + /* case Charging Downstream Port */ +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) + hpcd->BCDCallback(hpcd, PCD_BCD_CHARGING_DOWNSTREAM_PORT); +#else + HAL_PCDEx_BCD_Callback(hpcd, PCD_BCD_CHARGING_DOWNSTREAM_PORT); +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ + } + } + + /* Battery Charging capability discovery finished */ + (void)HAL_PCDEx_DeActivateBCD(hpcd); + +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) + hpcd->BCDCallback(hpcd, PCD_BCD_DISCOVERY_COMPLETED); +#else + HAL_PCDEx_BCD_Callback(hpcd, PCD_BCD_DISCOVERY_COMPLETED); +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ +} + +/** + * @brief Activate BatteryCharging feature. + * @param hpcd PCD handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCDEx_ActivateBCD(PCD_HandleTypeDef *hpcd) +{ + USB_OTG_GlobalTypeDef *USBx = hpcd->Instance; + + USBx->GCCFG &= ~(USB_OTG_GCCFG_PDEN); + USBx->GCCFG &= ~(USB_OTG_GCCFG_SDEN); + + /* Power Down USB tranceiver */ + USBx->GCCFG &= ~(USB_OTG_GCCFG_PWRDWN); + + /* Enable Battery charging */ + USBx->GCCFG |= USB_OTG_GCCFG_BCDEN; + + hpcd->battery_charging_active = 1U; + + return HAL_OK; +} + +/** + * @brief Deactivate BatteryCharging feature. + * @param hpcd PCD handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCDEx_DeActivateBCD(PCD_HandleTypeDef *hpcd) +{ + USB_OTG_GlobalTypeDef *USBx = hpcd->Instance; + + USBx->GCCFG &= ~(USB_OTG_GCCFG_SDEN); + USBx->GCCFG &= ~(USB_OTG_GCCFG_PDEN); + + /* Disable Battery charging */ + USBx->GCCFG &= ~(USB_OTG_GCCFG_BCDEN); + + hpcd->battery_charging_active = 0U; + + return HAL_OK; +} +#endif /* defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx) */ +#endif /* defined (USB_OTG_FS) || defined (USB_OTG_HS) */ + +/** + * @brief Send LPM message to user layer callback. + * @param hpcd PCD handle + * @param msg LPM message + * @retval HAL status + */ +__weak void HAL_PCDEx_LPM_Callback(PCD_HandleTypeDef *hpcd, PCD_LPM_MsgTypeDef msg) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hpcd); + UNUSED(msg); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_PCDEx_LPM_Callback could be implemented in the user file + */ +} + +/** + * @brief Send BatteryCharging message to user layer callback. + * @param hpcd PCD handle + * @param msg LPM message + * @retval HAL status + */ +__weak void HAL_PCDEx_BCD_Callback(PCD_HandleTypeDef *hpcd, PCD_BCD_MsgTypeDef msg) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hpcd); + UNUSED(msg); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_PCDEx_BCD_Callback could be implemented in the user file + */ +} + +/** + * @} + */ + +/** + * @} + */ +#endif /* defined (USB_OTG_FS) || defined (USB_OTG_HS) */ +#endif /* HAL_PCD_MODULE_ENABLED */ + +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_sd.c b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_sd.c new file mode 100644 index 0000000..68040a6 --- /dev/null +++ b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_sd.c @@ -0,0 +1,3315 @@ +/** + ****************************************************************************** + * @file stm32f4xx_hal_sd.c + * @author MCD Application Team + * @brief SD card HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the Secure Digital (SD) peripheral: + * + Initialization and de-initialization functions + * + IO operation functions + * + Peripheral Control functions + * + SD card Control functions + * + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] + This driver implements a high level communication layer for read and write from/to + this memory. The needed STM32 hardware resources (SDIO and GPIO) are performed by + the user in HAL_SD_MspInit() function (MSP layer). + Basically, the MSP layer configuration should be the same as we provide in the + examples. + You can easily tailor this configuration according to hardware resources. + + [..] + This driver is a generic layered driver for SDIO memories which uses the HAL + SDIO driver functions to interface with SD and uSD cards devices. + It is used as follows: + + (#)Initialize the SDIO low level resources by implement the HAL_SD_MspInit() API: + (##) Enable the SDIO interface clock using __HAL_RCC_SDIO_CLK_ENABLE(); + (##) SDIO pins configuration for SD card + (+++) Enable the clock for the SDIO GPIOs using the functions __HAL_RCC_GPIOx_CLK_ENABLE(); + (+++) Configure these SDIO pins as alternate function pull-up using HAL_GPIO_Init() + and according to your pin assignment; + (##) DMA Configuration if you need to use DMA process (HAL_SD_ReadBlocks_DMA() + and HAL_SD_WriteBlocks_DMA() APIs). + (+++) Enable the DMAx interface clock using __HAL_RCC_DMAx_CLK_ENABLE(); + (+++) Configure the DMA using the function HAL_DMA_Init() with predeclared and filled. + (##) NVIC configuration if you need to use interrupt process when using DMA transfer. + (+++) Configure the SDIO and DMA interrupt priorities using functions + HAL_NVIC_SetPriority(); DMA priority is superior to SDIO's priority + (+++) Enable the NVIC DMA and SDIO IRQs using function HAL_NVIC_EnableIRQ() + (+++) SDIO interrupts are managed using the macros __HAL_SD_ENABLE_IT() + and __HAL_SD_DISABLE_IT() inside the communication process. + (+++) SDIO interrupts pending bits are managed using the macros __HAL_SD_GET_IT() + and __HAL_SD_CLEAR_IT() + (##) NVIC configuration if you need to use interrupt process (HAL_SD_ReadBlocks_IT() + and HAL_SD_WriteBlocks_IT() APIs). + (+++) Configure the SDIO interrupt priorities using function + HAL_NVIC_SetPriority(); + (+++) Enable the NVIC SDIO IRQs using function HAL_NVIC_EnableIRQ() + (+++) SDIO interrupts are managed using the macros __HAL_SD_ENABLE_IT() + and __HAL_SD_DISABLE_IT() inside the communication process. + (+++) SDIO interrupts pending bits are managed using the macros __HAL_SD_GET_IT() + and __HAL_SD_CLEAR_IT() + (#) At this stage, you can perform SD read/write/erase operations after SD card initialization + + + *** SD Card Initialization and configuration *** + ================================================ + [..] + To initialize the SD Card, use the HAL_SD_Init() function. It Initializes + SDIO IP(STM32 side) and the SD Card, and put it into StandBy State (Ready for data transfer). + This function provide the following operations: + + (#) Initialize the SDIO peripheral interface with defaullt configuration. + The initialization process is done at 400KHz. You can change or adapt + this frequency by adjusting the "ClockDiv" field. + The SD Card frequency (SDIO_CK) is computed as follows: + + SDIO_CK = SDIOCLK / (ClockDiv + 2) + + In initialization mode and according to the SD Card standard, + make sure that the SDIO_CK frequency doesn't exceed 400KHz. + + This phase of initialization is done through SDIO_Init() and + SDIO_PowerState_ON() SDIO low level APIs. + + (#) Initialize the SD card. The API used is HAL_SD_InitCard(). + This phase allows the card initialization and identification + and check the SD Card type (Standard Capacity or High Capacity) + The initialization flow is compatible with SD standard. + + This API (HAL_SD_InitCard()) could be used also to reinitialize the card in case + of plug-off plug-in. + + (#) Configure the SD Card Data transfer frequency. By Default, the card transfer + frequency is set to 24MHz. You can change or adapt this frequency by adjusting + the "ClockDiv" field. + In transfer mode and according to the SD Card standard, make sure that the + SDIO_CK frequency doesn't exceed 25MHz and 50MHz in High-speed mode switch. + To be able to use a frequency higher than 24MHz, you should use the SDIO + peripheral in bypass mode. Refer to the corresponding reference manual + for more details. + + (#) Select the corresponding SD Card according to the address read with the step 2. + + (#) Configure the SD Card in wide bus mode: 4-bits data. + + *** SD Card Read operation *** + ============================== + [..] + (+) You can read from SD card in polling mode by using function HAL_SD_ReadBlocks(). + This function allows the read of 512 bytes blocks. + You can choose either one block read operation or multiple block read operation + by adjusting the "NumberOfBlocks" parameter. + After this, you have to ensure that the transfer is done correctly. The check is done + through HAL_SD_GetCardState() function for SD card state. + + (+) You can read from SD card in DMA mode by using function HAL_SD_ReadBlocks_DMA(). + This function allows the read of 512 bytes blocks. + You can choose either one block read operation or multiple block read operation + by adjusting the "NumberOfBlocks" parameter. + After this, you have to ensure that the transfer is done correctly. The check is done + through HAL_SD_GetCardState() function for SD card state. + You could also check the DMA transfer process through the SD Rx interrupt event. + + (+) You can read from SD card in Interrupt mode by using function HAL_SD_ReadBlocks_IT(). + This function allows the read of 512 bytes blocks. + You can choose either one block read operation or multiple block read operation + by adjusting the "NumberOfBlocks" parameter. + After this, you have to ensure that the transfer is done correctly. The check is done + through HAL_SD_GetCardState() function for SD card state. + You could also check the IT transfer process through the SD Rx interrupt event. + + *** SD Card Write operation *** + =============================== + [..] + (+) You can write to SD card in polling mode by using function HAL_SD_WriteBlocks(). + This function allows the read of 512 bytes blocks. + You can choose either one block read operation or multiple block read operation + by adjusting the "NumberOfBlocks" parameter. + After this, you have to ensure that the transfer is done correctly. The check is done + through HAL_SD_GetCardState() function for SD card state. + + (+) You can write to SD card in DMA mode by using function HAL_SD_WriteBlocks_DMA(). + This function allows the read of 512 bytes blocks. + You can choose either one block read operation or multiple block read operation + by adjusting the "NumberOfBlocks" parameter. + After this, you have to ensure that the transfer is done correctly. The check is done + through HAL_SD_GetCardState() function for SD card state. + You could also check the DMA transfer process through the SD Tx interrupt event. + + (+) You can write to SD card in Interrupt mode by using function HAL_SD_WriteBlocks_IT(). + This function allows the read of 512 bytes blocks. + You can choose either one block read operation or multiple block read operation + by adjusting the "NumberOfBlocks" parameter. + After this, you have to ensure that the transfer is done correctly. The check is done + through HAL_SD_GetCardState() function for SD card state. + You could also check the IT transfer process through the SD Tx interrupt event. + + *** SD card status *** + ====================== + [..] + (+) The SD Status contains status bits that are related to the SD Memory + Card proprietary features. To get SD card status use the HAL_SD_GetCardStatus(). + + *** SD card information *** + =========================== + [..] + (+) To get SD card information, you can use the function HAL_SD_GetCardInfo(). + It returns useful information about the SD card such as block size, card type, + block number ... + + *** SD card CSD register *** + ============================ + [..] + (+) The HAL_SD_GetCardCSD() API allows to get the parameters of the CSD register. + Some of the CSD parameters are useful for card initialization and identification. + + *** SD card CID register *** + ============================ + [..] + (+) The HAL_SD_GetCardCID() API allows to get the parameters of the CID register. + Some of the CSD parameters are useful for card initialization and identification. + + *** SD HAL driver macros list *** + ================================== + [..] + Below the list of most used macros in SD HAL driver. + + (+) __HAL_SD_ENABLE : Enable the SD device + (+) __HAL_SD_DISABLE : Disable the SD device + (+) __HAL_SD_DMA_ENABLE: Enable the SDIO DMA transfer + (+) __HAL_SD_DMA_DISABLE: Disable the SDIO DMA transfer + (+) __HAL_SD_ENABLE_IT: Enable the SD device interrupt + (+) __HAL_SD_DISABLE_IT: Disable the SD device interrupt + (+) __HAL_SD_GET_FLAG:Check whether the specified SD flag is set or not + (+) __HAL_SD_CLEAR_FLAG: Clear the SD's pending flags + + [..] + (@) You can refer to the SD HAL driver header file for more useful macros + + *** Callback registration *** + ============================================= + [..] + The compilation define USE_HAL_SD_REGISTER_CALLBACKS when set to 1 + allows the user to configure dynamically the driver callbacks. + + Use Functions @ref HAL_SD_RegisterCallback() to register a user callback, + it allows to register following callbacks: + (+) TxCpltCallback : callback when a transmission transfer is completed. + (+) RxCpltCallback : callback when a reception transfer is completed. + (+) ErrorCallback : callback when error occurs. + (+) AbortCpltCallback : callback when abort is completed. + (+) MspInitCallback : SD MspInit. + (+) MspDeInitCallback : SD MspDeInit. + This function takes as parameters the HAL peripheral handle, the Callback ID + and a pointer to the user callback function. + + Use function @ref HAL_SD_UnRegisterCallback() to reset a callback to the default + weak (surcharged) function. It allows to reset following callbacks: + (+) TxCpltCallback : callback when a transmission transfer is completed. + (+) RxCpltCallback : callback when a reception transfer is completed. + (+) ErrorCallback : callback when error occurs. + (+) AbortCpltCallback : callback when abort is completed. + (+) MspInitCallback : SD MspInit. + (+) MspDeInitCallback : SD MspDeInit. + This function) takes as parameters the HAL peripheral handle and the Callback ID. + + By default, after the @ref HAL_SD_Init and if the state is HAL_SD_STATE_RESET + all callbacks are reset to the corresponding legacy weak (surcharged) functions. + Exception done for MspInit and MspDeInit callbacks that are respectively + reset to the legacy weak (surcharged) functions in the @ref HAL_SD_Init + and @ref HAL_SD_DeInit only when these callbacks are null (not registered beforehand). + If not, MspInit or MspDeInit are not null, the @ref HAL_SD_Init and @ref HAL_SD_DeInit + keep and use the user MspInit/MspDeInit callbacks (registered beforehand) + + Callbacks can be registered/unregistered in READY state only. + Exception done for MspInit/MspDeInit callbacks that can be registered/unregistered + in READY or RESET state, thus registered (user) MspInit/DeInit callbacks can be used + during the Init/DeInit. + In that case first register the MspInit/MspDeInit user callbacks + using @ref HAL_SD_RegisterCallback before calling @ref HAL_SD_DeInit + or @ref HAL_SD_Init function. + + When The compilation define USE_HAL_SD_REGISTER_CALLBACKS is set to 0 or + not defined, the callback registering feature is not available + and weak (surcharged) callbacks are used. + + @endverbatim + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2017 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f4xx_hal.h" + +/** @addtogroup STM32F4xx_HAL_Driver + * @{ + */ + +/** @addtogroup SD + * @{ + */ + +#ifdef HAL_SD_MODULE_ENABLED + +#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) || \ + defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || \ + defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F446xx) || \ + defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || \ + defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx) + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/** @addtogroup SD_Private_Defines + * @{ + */ + +/** + * @} + */ + +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Private functions ---------------------------------------------------------*/ +/** @defgroup SD_Private_Functions SD Private Functions + * @{ + */ +static uint32_t SD_InitCard(SD_HandleTypeDef *hsd); +static uint32_t SD_PowerON(SD_HandleTypeDef *hsd); +static uint32_t SD_SendSDStatus(SD_HandleTypeDef *hsd, uint32_t *pSDstatus); +static uint32_t SD_SendStatus(SD_HandleTypeDef *hsd, uint32_t *pCardStatus); +static uint32_t SD_WideBus_Enable(SD_HandleTypeDef *hsd); +static uint32_t SD_WideBus_Disable(SD_HandleTypeDef *hsd); +static uint32_t SD_FindSCR(SD_HandleTypeDef *hsd, uint32_t *pSCR); +static HAL_StatusTypeDef SD_PowerOFF(SD_HandleTypeDef *hsd); +static HAL_StatusTypeDef SD_Write_IT(SD_HandleTypeDef *hsd); +static HAL_StatusTypeDef SD_Read_IT(SD_HandleTypeDef *hsd); +static void SD_DMATransmitCplt(DMA_HandleTypeDef *hdma); +static void SD_DMAReceiveCplt(DMA_HandleTypeDef *hdma); +static void SD_DMAError(DMA_HandleTypeDef *hdma); +static void SD_DMATxAbort(DMA_HandleTypeDef *hdma); +static void SD_DMARxAbort(DMA_HandleTypeDef *hdma); +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup SD_Exported_Functions + * @{ + */ + +/** @addtogroup SD_Exported_Functions_Group1 + * @brief Initialization and de-initialization functions + * +@verbatim + ============================================================================== + ##### Initialization and de-initialization functions ##### + ============================================================================== + [..] + This section provides functions allowing to initialize/de-initialize the SD + card device to be ready for use. + +@endverbatim + * @{ + */ + +/** + * @brief Initializes the SD according to the specified parameters in the + SD_HandleTypeDef and create the associated handle. + * @param hsd Pointer to the SD handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SD_Init(SD_HandleTypeDef *hsd) +{ + /* Check the SD handle allocation */ + if(hsd == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_SDIO_ALL_INSTANCE(hsd->Instance)); + assert_param(IS_SDIO_CLOCK_EDGE(hsd->Init.ClockEdge)); + assert_param(IS_SDIO_CLOCK_BYPASS(hsd->Init.ClockBypass)); + assert_param(IS_SDIO_CLOCK_POWER_SAVE(hsd->Init.ClockPowerSave)); + assert_param(IS_SDIO_BUS_WIDE(hsd->Init.BusWide)); + assert_param(IS_SDIO_HARDWARE_FLOW_CONTROL(hsd->Init.HardwareFlowControl)); + assert_param(IS_SDIO_CLKDIV(hsd->Init.ClockDiv)); + + if(hsd->State == HAL_SD_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + hsd->Lock = HAL_UNLOCKED; +#if (USE_HAL_SD_REGISTER_CALLBACKS == 1) + /* Reset Callback pointers in HAL_SD_STATE_RESET only */ + hsd->TxCpltCallback = HAL_SD_TxCpltCallback; + hsd->RxCpltCallback = HAL_SD_RxCpltCallback; + hsd->ErrorCallback = HAL_SD_ErrorCallback; + hsd->AbortCpltCallback = HAL_SD_AbortCallback; + + if(hsd->MspInitCallback == NULL) + { + hsd->MspInitCallback = HAL_SD_MspInit; + } + + /* Init the low level hardware */ + hsd->MspInitCallback(hsd); +#else + /* Init the low level hardware : GPIO, CLOCK, CORTEX...etc */ + HAL_SD_MspInit(hsd); +#endif + } + + hsd->State = HAL_SD_STATE_BUSY; + + /* Initialize the Card parameters */ + HAL_SD_InitCard(hsd); + + /* Initialize the error code */ + hsd->ErrorCode = HAL_DMA_ERROR_NONE; + + /* Initialize the SD operation */ + hsd->Context = SD_CONTEXT_NONE; + + /* Initialize the SD state */ + hsd->State = HAL_SD_STATE_READY; + + return HAL_OK; +} + +/** + * @brief Initializes the SD Card. + * @param hsd Pointer to SD handle + * @note This function initializes the SD card. It could be used when a card + re-initialization is needed. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SD_InitCard(SD_HandleTypeDef *hsd) +{ + uint32_t errorstate = HAL_SD_ERROR_NONE; + SD_InitTypeDef Init; + + /* Default SDIO peripheral configuration for SD card initialization */ + Init.ClockEdge = SDIO_CLOCK_EDGE_RISING; + Init.ClockBypass = SDIO_CLOCK_BYPASS_DISABLE; + Init.ClockPowerSave = SDIO_CLOCK_POWER_SAVE_DISABLE; + Init.BusWide = SDIO_BUS_WIDE_1B; + Init.HardwareFlowControl = SDIO_HARDWARE_FLOW_CONTROL_DISABLE; + Init.ClockDiv = SDIO_INIT_CLK_DIV; + + /* Initialize SDIO peripheral interface with default configuration */ + SDIO_Init(hsd->Instance, Init); + + /* Disable SDIO Clock */ + __HAL_SD_DISABLE(hsd); + + /* Set Power State to ON */ + SDIO_PowerState_ON(hsd->Instance); + + /* Enable SDIO Clock */ + __HAL_SD_ENABLE(hsd); + + /* Required power up waiting time before starting the SD initialization + sequence */ + HAL_Delay(2U); + + /* Identify card operating voltage */ + errorstate = SD_PowerON(hsd); + if(errorstate != HAL_SD_ERROR_NONE) + { + hsd->State = HAL_SD_STATE_READY; + hsd->ErrorCode |= errorstate; + return HAL_ERROR; + } + + /* Card initialization */ + errorstate = SD_InitCard(hsd); + if(errorstate != HAL_SD_ERROR_NONE) + { + hsd->State = HAL_SD_STATE_READY; + hsd->ErrorCode |= errorstate; + return HAL_ERROR; + } + + return HAL_OK; +} + +/** + * @brief De-Initializes the SD card. + * @param hsd Pointer to SD handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SD_DeInit(SD_HandleTypeDef *hsd) +{ + /* Check the SD handle allocation */ + if(hsd == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_SDIO_ALL_INSTANCE(hsd->Instance)); + + hsd->State = HAL_SD_STATE_BUSY; + + /* Set SD power state to off */ + SD_PowerOFF(hsd); + +#if (USE_HAL_SD_REGISTER_CALLBACKS == 1) + if(hsd->MspDeInitCallback == NULL) + { + hsd->MspDeInitCallback = HAL_SD_MspDeInit; + } + + /* DeInit the low level hardware */ + hsd->MspDeInitCallback(hsd); +#else + /* De-Initialize the MSP layer */ + HAL_SD_MspDeInit(hsd); +#endif + + hsd->ErrorCode = HAL_SD_ERROR_NONE; + hsd->State = HAL_SD_STATE_RESET; + + return HAL_OK; +} + + +/** + * @brief Initializes the SD MSP. + * @param hsd Pointer to SD handle + * @retval None + */ +__weak void HAL_SD_MspInit(SD_HandleTypeDef *hsd) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hsd); + + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_SD_MspInit could be implemented in the user file + */ +} + +/** + * @brief De-Initialize SD MSP. + * @param hsd Pointer to SD handle + * @retval None + */ +__weak void HAL_SD_MspDeInit(SD_HandleTypeDef *hsd) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hsd); + + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_SD_MspDeInit could be implemented in the user file + */ +} + +/** + * @} + */ + +/** @addtogroup SD_Exported_Functions_Group2 + * @brief Data transfer functions + * +@verbatim + ============================================================================== + ##### IO operation functions ##### + ============================================================================== + [..] + This subsection provides a set of functions allowing to manage the data + transfer from/to SD card. + +@endverbatim + * @{ + */ + +/** + * @brief Reads block(s) from a specified address in a card. The Data transfer + * is managed by polling mode. + * @note This API should be followed by a check on the card state through + * HAL_SD_GetCardState(). + * @param hsd Pointer to SD handle + * @param pData pointer to the buffer that will contain the received data + * @param BlockAdd Block Address from where data is to be read + * @param NumberOfBlocks Number of SD blocks to read + * @param Timeout Specify timeout value + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SD_ReadBlocks(SD_HandleTypeDef *hsd, uint8_t *pData, uint32_t BlockAdd, uint32_t NumberOfBlocks, uint32_t Timeout) +{ + SDIO_DataInitTypeDef config; + uint32_t errorstate = HAL_SD_ERROR_NONE; + uint32_t tickstart = HAL_GetTick(); + uint32_t count = 0U, *tempbuff = (uint32_t *)pData; + + if(NULL == pData) + { + hsd->ErrorCode |= HAL_SD_ERROR_PARAM; + return HAL_ERROR; + } + + if(hsd->State == HAL_SD_STATE_READY) + { + hsd->ErrorCode = HAL_DMA_ERROR_NONE; + + if((BlockAdd + NumberOfBlocks) > (hsd->SdCard.LogBlockNbr)) + { + hsd->ErrorCode |= HAL_SD_ERROR_ADDR_OUT_OF_RANGE; + return HAL_ERROR; + } + + hsd->State = HAL_SD_STATE_BUSY; + + /* Initialize data control register */ + hsd->Instance->DCTRL = 0U; + + if(hsd->SdCard.CardType != CARD_SDHC_SDXC) + { + BlockAdd *= 512U; + } + + /* Set Block Size for Card */ + errorstate = SDMMC_CmdBlockLength(hsd->Instance, BLOCKSIZE); + if(errorstate != HAL_SD_ERROR_NONE) + { + /* Clear all the static flags */ + __HAL_SD_CLEAR_FLAG(hsd, SDIO_STATIC_FLAGS); + hsd->ErrorCode |= errorstate; + hsd->State = HAL_SD_STATE_READY; + return HAL_ERROR; + } + + /* Configure the SD DPSM (Data Path State Machine) */ + config.DataTimeOut = SDMMC_DATATIMEOUT; + config.DataLength = NumberOfBlocks * BLOCKSIZE; + config.DataBlockSize = SDIO_DATABLOCK_SIZE_512B; + config.TransferDir = SDIO_TRANSFER_DIR_TO_SDIO; + config.TransferMode = SDIO_TRANSFER_MODE_BLOCK; + config.DPSM = SDIO_DPSM_ENABLE; + SDIO_ConfigData(hsd->Instance, &config); + + /* Read block(s) in polling mode */ + if(NumberOfBlocks > 1U) + { + hsd->Context = SD_CONTEXT_READ_MULTIPLE_BLOCK; + + /* Read Multi Block command */ + errorstate = SDMMC_CmdReadMultiBlock(hsd->Instance, BlockAdd); + } + else + { + hsd->Context = SD_CONTEXT_READ_SINGLE_BLOCK; + + /* Read Single Block command */ + errorstate = SDMMC_CmdReadSingleBlock(hsd->Instance, BlockAdd); + } + if(errorstate != HAL_SD_ERROR_NONE) + { + /* Clear all the static flags */ + __HAL_SD_CLEAR_FLAG(hsd, SDIO_STATIC_FLAGS); + hsd->ErrorCode |= errorstate; + hsd->State = HAL_SD_STATE_READY; + return HAL_ERROR; + } + + /* Poll on SDIO flags */ +#ifdef SDIO_STA_STBITERR + while(!__HAL_SD_GET_FLAG(hsd, SDIO_FLAG_RXOVERR | SDIO_FLAG_DCRCFAIL | SDIO_FLAG_DTIMEOUT | SDIO_FLAG_DATAEND | SDIO_STA_STBITERR)) +#else /* SDIO_STA_STBITERR not defined */ + while(!__HAL_SD_GET_FLAG(hsd, SDIO_FLAG_RXOVERR | SDIO_FLAG_DCRCFAIL | SDIO_FLAG_DTIMEOUT | SDIO_FLAG_DATAEND)) +#endif /* SDIO_STA_STBITERR */ + { + if(__HAL_SD_GET_FLAG(hsd, SDIO_FLAG_RXFIFOHF)) + { + /* Read data from SDIO Rx FIFO */ + for(count = 0U; count < 8U; count++) + { + *(tempbuff + count) = SDIO_ReadFIFO(hsd->Instance); + } + tempbuff += 8U; + } + + if((Timeout == 0U)||((HAL_GetTick()-tickstart) >= Timeout)) + { + /* Clear all the static flags */ + __HAL_SD_CLEAR_FLAG(hsd, SDIO_STATIC_FLAGS); + hsd->ErrorCode |= HAL_SD_ERROR_TIMEOUT; + hsd->State= HAL_SD_STATE_READY; + return HAL_TIMEOUT; + } + } + + /* Send stop transmission command in case of multiblock read */ + if(__HAL_SD_GET_FLAG(hsd, SDIO_FLAG_DATAEND) && (NumberOfBlocks > 1U)) + { + if(hsd->SdCard.CardType != CARD_SECURED) + { + /* Send stop transmission command */ + errorstate = SDMMC_CmdStopTransfer(hsd->Instance); + if(errorstate != HAL_SD_ERROR_NONE) + { + /* Clear all the static flags */ + __HAL_SD_CLEAR_FLAG(hsd, SDIO_STATIC_FLAGS); + hsd->ErrorCode |= errorstate; + hsd->State = HAL_SD_STATE_READY; + return HAL_ERROR; + } + } + } + + /* Get error state */ + if(__HAL_SD_GET_FLAG(hsd, SDIO_FLAG_DTIMEOUT)) + { + /* Clear all the static flags */ + __HAL_SD_CLEAR_FLAG(hsd, SDIO_STATIC_FLAGS); + hsd->ErrorCode |= HAL_SD_ERROR_DATA_TIMEOUT; + hsd->State = HAL_SD_STATE_READY; + return HAL_ERROR; + } + else if(__HAL_SD_GET_FLAG(hsd, SDIO_FLAG_DCRCFAIL)) + { + /* Clear all the static flags */ + __HAL_SD_CLEAR_FLAG(hsd, SDIO_STATIC_FLAGS); + hsd->ErrorCode |= HAL_SD_ERROR_DATA_CRC_FAIL; + hsd->State = HAL_SD_STATE_READY; + return HAL_ERROR; + } + else if(__HAL_SD_GET_FLAG(hsd, SDIO_FLAG_RXOVERR)) + { + /* Clear all the static flags */ + __HAL_SD_CLEAR_FLAG(hsd, SDIO_STATIC_FLAGS); + hsd->ErrorCode |= HAL_SD_ERROR_RX_OVERRUN; + hsd->State = HAL_SD_STATE_READY; + return HAL_ERROR; + } + + /* Empty FIFO if there is still any data */ + while ((__HAL_SD_GET_FLAG(hsd, SDIO_FLAG_RXDAVL))) + { + *tempbuff = SDIO_ReadFIFO(hsd->Instance); + tempbuff++; + + if((Timeout == 0U)||((HAL_GetTick()-tickstart) >= Timeout)) + { + /* Clear all the static flags */ + __HAL_SD_CLEAR_FLAG(hsd, SDIO_STATIC_FLAGS); + hsd->ErrorCode |= HAL_SD_ERROR_TIMEOUT; + hsd->State= HAL_SD_STATE_READY; + return HAL_ERROR; + } + } + + /* Clear all the static flags */ + __HAL_SD_CLEAR_FLAG(hsd, SDIO_STATIC_FLAGS); + + hsd->State = HAL_SD_STATE_READY; + + return HAL_OK; + } + else + { + hsd->ErrorCode |= HAL_SD_ERROR_BUSY; + return HAL_ERROR; + } +} + +/** + * @brief Allows to write block(s) to a specified address in a card. The Data + * transfer is managed by polling mode. + * @note This API should be followed by a check on the card state through + * HAL_SD_GetCardState(). + * @param hsd Pointer to SD handle + * @param pData pointer to the buffer that will contain the data to transmit + * @param BlockAdd Block Address where data will be written + * @param NumberOfBlocks Number of SD blocks to write + * @param Timeout Specify timeout value + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SD_WriteBlocks(SD_HandleTypeDef *hsd, uint8_t *pData, uint32_t BlockAdd, uint32_t NumberOfBlocks, uint32_t Timeout) +{ + SDIO_DataInitTypeDef config; + uint32_t errorstate = HAL_SD_ERROR_NONE; + uint32_t tickstart = HAL_GetTick(); + uint32_t count = 0U; + uint32_t *tempbuff = (uint32_t *)pData; + + if(NULL == pData) + { + hsd->ErrorCode |= HAL_SD_ERROR_PARAM; + return HAL_ERROR; + } + + if(hsd->State == HAL_SD_STATE_READY) + { + hsd->ErrorCode = HAL_DMA_ERROR_NONE; + + if((BlockAdd + NumberOfBlocks) > (hsd->SdCard.LogBlockNbr)) + { + hsd->ErrorCode |= HAL_SD_ERROR_ADDR_OUT_OF_RANGE; + return HAL_ERROR; + } + + hsd->State = HAL_SD_STATE_BUSY; + + /* Initialize data control register */ + hsd->Instance->DCTRL = 0U; + + if(hsd->SdCard.CardType != CARD_SDHC_SDXC) + { + BlockAdd *= 512U; + } + + /* Set Block Size for Card */ + errorstate = SDMMC_CmdBlockLength(hsd->Instance, BLOCKSIZE); + if(errorstate != HAL_SD_ERROR_NONE) + { + /* Clear all the static flags */ + __HAL_SD_CLEAR_FLAG(hsd, SDIO_STATIC_FLAGS); + hsd->ErrorCode |= errorstate; + hsd->State = HAL_SD_STATE_READY; + return HAL_ERROR; + } + + /* Write Blocks in Polling mode */ + if(NumberOfBlocks > 1U) + { + hsd->Context = SD_CONTEXT_WRITE_MULTIPLE_BLOCK; + + /* Write Multi Block command */ + errorstate = SDMMC_CmdWriteMultiBlock(hsd->Instance, BlockAdd); + } + else + { + hsd->Context = SD_CONTEXT_WRITE_SINGLE_BLOCK; + + /* Write Single Block command */ + errorstate = SDMMC_CmdWriteSingleBlock(hsd->Instance, BlockAdd); + } + if(errorstate != HAL_SD_ERROR_NONE) + { + /* Clear all the static flags */ + __HAL_SD_CLEAR_FLAG(hsd, SDIO_STATIC_FLAGS); + hsd->ErrorCode |= errorstate; + hsd->State = HAL_SD_STATE_READY; + return HAL_ERROR; + } + + /* Configure the SD DPSM (Data Path State Machine) */ + config.DataTimeOut = SDMMC_DATATIMEOUT; + config.DataLength = NumberOfBlocks * BLOCKSIZE; + config.DataBlockSize = SDIO_DATABLOCK_SIZE_512B; + config.TransferDir = SDIO_TRANSFER_DIR_TO_CARD; + config.TransferMode = SDIO_TRANSFER_MODE_BLOCK; + config.DPSM = SDIO_DPSM_ENABLE; + SDIO_ConfigData(hsd->Instance, &config); + + /* Write block(s) in polling mode */ +#ifdef SDIO_STA_STBITERR + while(!__HAL_SD_GET_FLAG(hsd, SDIO_FLAG_TXUNDERR | SDIO_FLAG_DCRCFAIL | SDIO_FLAG_DTIMEOUT | SDIO_FLAG_DATAEND | SDIO_FLAG_STBITERR)) +#else /* SDIO_STA_STBITERR not defined */ + while(!__HAL_SD_GET_FLAG(hsd, SDIO_FLAG_TXUNDERR | SDIO_FLAG_DCRCFAIL | SDIO_FLAG_DTIMEOUT | SDIO_FLAG_DATAEND)) +#endif /* SDIO_STA_STBITERR */ + { + if(__HAL_SD_GET_FLAG(hsd, SDIO_FLAG_TXFIFOHE)) + { + /* Write data to SDIO Tx FIFO */ + for(count = 0U; count < 8U; count++) + { + SDIO_WriteFIFO(hsd->Instance, (tempbuff + count)); + } + tempbuff += 8U; + } + + if((Timeout == 0U)||((HAL_GetTick()-tickstart) >= Timeout)) + { + /* Clear all the static flags */ + __HAL_SD_CLEAR_FLAG(hsd, SDIO_STATIC_FLAGS); + hsd->ErrorCode |= errorstate; + hsd->State = HAL_SD_STATE_READY; + return HAL_TIMEOUT; + } + } + + /* Send stop transmission command in case of multiblock write */ + if(__HAL_SD_GET_FLAG(hsd, SDIO_FLAG_DATAEND) && (NumberOfBlocks > 1U)) + { + if(hsd->SdCard.CardType != CARD_SECURED) + { + /* Send stop transmission command */ + errorstate = SDMMC_CmdStopTransfer(hsd->Instance); + if(errorstate != HAL_SD_ERROR_NONE) + { + /* Clear all the static flags */ + __HAL_SD_CLEAR_FLAG(hsd, SDIO_STATIC_FLAGS); + hsd->ErrorCode |= errorstate; + hsd->State = HAL_SD_STATE_READY; + return HAL_ERROR; + } + } + } + + /* Get error state */ + if(__HAL_SD_GET_FLAG(hsd, SDIO_FLAG_DTIMEOUT)) + { + /* Clear all the static flags */ + __HAL_SD_CLEAR_FLAG(hsd, SDIO_STATIC_FLAGS); + hsd->ErrorCode |= HAL_SD_ERROR_DATA_TIMEOUT; + hsd->State = HAL_SD_STATE_READY; + return HAL_ERROR; + } + else if(__HAL_SD_GET_FLAG(hsd, SDIO_FLAG_DCRCFAIL)) + { + /* Clear all the static flags */ + __HAL_SD_CLEAR_FLAG(hsd, SDIO_STATIC_FLAGS); + hsd->ErrorCode |= HAL_SD_ERROR_DATA_CRC_FAIL; + hsd->State = HAL_SD_STATE_READY; + return HAL_ERROR; + } + else if(__HAL_SD_GET_FLAG(hsd, SDIO_FLAG_TXUNDERR)) + { + /* Clear all the static flags */ + __HAL_SD_CLEAR_FLAG(hsd, SDIO_STATIC_FLAGS); + hsd->ErrorCode |= HAL_SD_ERROR_TX_UNDERRUN; + hsd->State = HAL_SD_STATE_READY; + return HAL_ERROR; + } + + /* Clear all the static flags */ + __HAL_SD_CLEAR_FLAG(hsd, SDIO_STATIC_FLAGS); + + hsd->State = HAL_SD_STATE_READY; + + return HAL_OK; + } + else + { + hsd->ErrorCode |= HAL_SD_ERROR_BUSY; + return HAL_ERROR; + } +} + +/** + * @brief Reads block(s) from a specified address in a card. The Data transfer + * is managed in interrupt mode. + * @note This API should be followed by a check on the card state through + * HAL_SD_GetCardState(). + * @note You could also check the IT transfer process through the SD Rx + * interrupt event. + * @param hsd Pointer to SD handle + * @param pData Pointer to the buffer that will contain the received data + * @param BlockAdd Block Address from where data is to be read + * @param NumberOfBlocks Number of blocks to read. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SD_ReadBlocks_IT(SD_HandleTypeDef *hsd, uint8_t *pData, uint32_t BlockAdd, uint32_t NumberOfBlocks) +{ + SDIO_DataInitTypeDef config; + uint32_t errorstate = HAL_SD_ERROR_NONE; + + if(NULL == pData) + { + hsd->ErrorCode |= HAL_SD_ERROR_PARAM; + return HAL_ERROR; + } + + if(hsd->State == HAL_SD_STATE_READY) + { + hsd->ErrorCode = HAL_DMA_ERROR_NONE; + + if((BlockAdd + NumberOfBlocks) > (hsd->SdCard.LogBlockNbr)) + { + hsd->ErrorCode |= HAL_SD_ERROR_ADDR_OUT_OF_RANGE; + return HAL_ERROR; + } + + hsd->State = HAL_SD_STATE_BUSY; + + /* Initialize data control register */ + hsd->Instance->DCTRL = 0U; + + hsd->pRxBuffPtr = (uint32_t *)pData; + hsd->RxXferSize = BLOCKSIZE * NumberOfBlocks; + +#ifdef SDIO_STA_STBITERR + __HAL_SD_ENABLE_IT(hsd, (SDIO_IT_DCRCFAIL | SDIO_IT_DTIMEOUT | SDIO_IT_RXOVERR | SDIO_IT_DATAEND | SDIO_FLAG_RXFIFOHF | SDIO_IT_STBITERR)); +#else /* SDIO_STA_STBITERR not defined */ + __HAL_SD_ENABLE_IT(hsd, (SDIO_IT_DCRCFAIL | SDIO_IT_DTIMEOUT | SDIO_IT_RXOVERR | SDIO_IT_DATAEND | SDIO_FLAG_RXFIFOHF)); +#endif /* SDIO_STA_STBITERR */ + + if(hsd->SdCard.CardType != CARD_SDHC_SDXC) + { + BlockAdd *= 512U; + } + + /* Configure the SD DPSM (Data Path State Machine) */ + config.DataTimeOut = SDMMC_DATATIMEOUT; + config.DataLength = BLOCKSIZE * NumberOfBlocks; + config.DataBlockSize = SDIO_DATABLOCK_SIZE_512B; + config.TransferDir = SDIO_TRANSFER_DIR_TO_SDIO; + config.TransferMode = SDIO_TRANSFER_MODE_BLOCK; + config.DPSM = SDIO_DPSM_ENABLE; + SDIO_ConfigData(hsd->Instance, &config); + + /* Set Block Size for Card */ + errorstate = SDMMC_CmdBlockLength(hsd->Instance, BLOCKSIZE); + if(errorstate != HAL_SD_ERROR_NONE) + { + /* Clear all the static flags */ + __HAL_SD_CLEAR_FLAG(hsd, SDIO_STATIC_FLAGS); + hsd->ErrorCode |= errorstate; + hsd->State = HAL_SD_STATE_READY; + return HAL_ERROR; + } + + /* Read Blocks in IT mode */ + if(NumberOfBlocks > 1U) + { + hsd->Context = (SD_CONTEXT_READ_MULTIPLE_BLOCK | SD_CONTEXT_IT); + + /* Read Multi Block command */ + errorstate = SDMMC_CmdReadMultiBlock(hsd->Instance, BlockAdd); + } + else + { + hsd->Context = (SD_CONTEXT_READ_SINGLE_BLOCK | SD_CONTEXT_IT); + + /* Read Single Block command */ + errorstate = SDMMC_CmdReadSingleBlock(hsd->Instance, BlockAdd); + } + if(errorstate != HAL_SD_ERROR_NONE) + { + /* Clear all the static flags */ + __HAL_SD_CLEAR_FLAG(hsd, SDIO_STATIC_FLAGS); + hsd->ErrorCode |= errorstate; + hsd->State = HAL_SD_STATE_READY; + return HAL_ERROR; + } + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Writes block(s) to a specified address in a card. The Data transfer + * is managed in interrupt mode. + * @note This API should be followed by a check on the card state through + * HAL_SD_GetCardState(). + * @note You could also check the IT transfer process through the SD Tx + * interrupt event. + * @param hsd Pointer to SD handle + * @param pData Pointer to the buffer that will contain the data to transmit + * @param BlockAdd Block Address where data will be written + * @param NumberOfBlocks Number of blocks to write + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SD_WriteBlocks_IT(SD_HandleTypeDef *hsd, uint8_t *pData, uint32_t BlockAdd, uint32_t NumberOfBlocks) +{ + SDIO_DataInitTypeDef config; + uint32_t errorstate = HAL_SD_ERROR_NONE; + + if(NULL == pData) + { + hsd->ErrorCode |= HAL_SD_ERROR_PARAM; + return HAL_ERROR; + } + + if(hsd->State == HAL_SD_STATE_READY) + { + hsd->ErrorCode = HAL_DMA_ERROR_NONE; + + if((BlockAdd + NumberOfBlocks) > (hsd->SdCard.LogBlockNbr)) + { + hsd->ErrorCode |= HAL_SD_ERROR_ADDR_OUT_OF_RANGE; + return HAL_ERROR; + } + + hsd->State = HAL_SD_STATE_BUSY; + + /* Initialize data control register */ + hsd->Instance->DCTRL = 0U; + + hsd->pTxBuffPtr = (uint32_t *)pData; + hsd->TxXferSize = BLOCKSIZE * NumberOfBlocks; + + /* Enable transfer interrupts */ +#ifdef SDIO_STA_STBITERR + __HAL_SD_ENABLE_IT(hsd, (SDIO_IT_DCRCFAIL | SDIO_IT_DTIMEOUT | SDIO_IT_TXUNDERR | SDIO_IT_DATAEND | SDIO_FLAG_TXFIFOHE | SDIO_IT_STBITERR)); +#else /* SDIO_STA_STBITERR not defined */ + __HAL_SD_ENABLE_IT(hsd, (SDIO_IT_DCRCFAIL | SDIO_IT_DTIMEOUT | SDIO_IT_TXUNDERR | SDIO_IT_DATAEND | SDIO_FLAG_TXFIFOHE)); +#endif /* SDIO_STA_STBITERR */ + + if(hsd->SdCard.CardType != CARD_SDHC_SDXC) + { + BlockAdd *= 512U; + } + + /* Set Block Size for Card */ + errorstate = SDMMC_CmdBlockLength(hsd->Instance, BLOCKSIZE); + if(errorstate != HAL_SD_ERROR_NONE) + { + /* Clear all the static flags */ + __HAL_SD_CLEAR_FLAG(hsd, SDIO_STATIC_FLAGS); + hsd->ErrorCode |= errorstate; + hsd->State = HAL_SD_STATE_READY; + return HAL_ERROR; + } + + /* Write Blocks in Polling mode */ + if(NumberOfBlocks > 1U) + { + hsd->Context = (SD_CONTEXT_WRITE_MULTIPLE_BLOCK| SD_CONTEXT_IT); + + /* Write Multi Block command */ + errorstate = SDMMC_CmdWriteMultiBlock(hsd->Instance, BlockAdd); + } + else + { + hsd->Context = (SD_CONTEXT_WRITE_SINGLE_BLOCK | SD_CONTEXT_IT); + + /* Write Single Block command */ + errorstate = SDMMC_CmdWriteSingleBlock(hsd->Instance, BlockAdd); + } + if(errorstate != HAL_SD_ERROR_NONE) + { + /* Clear all the static flags */ + __HAL_SD_CLEAR_FLAG(hsd, SDIO_STATIC_FLAGS); + hsd->ErrorCode |= errorstate; + hsd->State = HAL_SD_STATE_READY; + return HAL_ERROR; + } + + /* Configure the SD DPSM (Data Path State Machine) */ + config.DataTimeOut = SDMMC_DATATIMEOUT; + config.DataLength = BLOCKSIZE * NumberOfBlocks; + config.DataBlockSize = SDIO_DATABLOCK_SIZE_512B; + config.TransferDir = SDIO_TRANSFER_DIR_TO_CARD; + config.TransferMode = SDIO_TRANSFER_MODE_BLOCK; + config.DPSM = SDIO_DPSM_ENABLE; + SDIO_ConfigData(hsd->Instance, &config); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Reads block(s) from a specified address in a card. The Data transfer + * is managed by DMA mode. + * @note This API should be followed by a check on the card state through + * HAL_SD_GetCardState(). + * @note You could also check the DMA transfer process through the SD Rx + * interrupt event. + * @param hsd Pointer SD handle + * @param pData Pointer to the buffer that will contain the received data + * @param BlockAdd Block Address from where data is to be read + * @param NumberOfBlocks Number of blocks to read. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SD_ReadBlocks_DMA(SD_HandleTypeDef *hsd, uint8_t *pData, uint32_t BlockAdd, uint32_t NumberOfBlocks) +{ + SDIO_DataInitTypeDef config; + uint32_t errorstate = HAL_SD_ERROR_NONE; + + if(NULL == pData) + { + hsd->ErrorCode |= HAL_SD_ERROR_PARAM; + return HAL_ERROR; + } + + if(hsd->State == HAL_SD_STATE_READY) + { + hsd->ErrorCode = HAL_DMA_ERROR_NONE; + + if((BlockAdd + NumberOfBlocks) > (hsd->SdCard.LogBlockNbr)) + { + hsd->ErrorCode |= HAL_SD_ERROR_ADDR_OUT_OF_RANGE; + return HAL_ERROR; + } + + hsd->State = HAL_SD_STATE_BUSY; + + /* Initialize data control register */ + hsd->Instance->DCTRL = 0U; + +#ifdef SDIO_STA_STBITERR + __HAL_SD_ENABLE_IT(hsd, (SDIO_IT_DCRCFAIL | SDIO_IT_DTIMEOUT | SDIO_IT_RXOVERR | SDIO_IT_DATAEND | SDIO_IT_STBITERR)); +#else /* SDIO_STA_STBITERR not defined */ + __HAL_SD_ENABLE_IT(hsd, (SDIO_IT_DCRCFAIL | SDIO_IT_DTIMEOUT | SDIO_IT_RXOVERR | SDIO_IT_DATAEND)); +#endif /* SDIO_STA_STBITERR */ + + /* Set the DMA transfer complete callback */ + hsd->hdmarx->XferCpltCallback = SD_DMAReceiveCplt; + + /* Set the DMA error callback */ + hsd->hdmarx->XferErrorCallback = SD_DMAError; + + /* Set the DMA Abort callback */ + hsd->hdmarx->XferAbortCallback = NULL; + + /* Enable the DMA Channel */ + HAL_DMA_Start_IT(hsd->hdmarx, (uint32_t)&hsd->Instance->FIFO, (uint32_t)pData, (uint32_t)(BLOCKSIZE * NumberOfBlocks)/4); + + /* Enable SD DMA transfer */ + __HAL_SD_DMA_ENABLE(hsd); + + if(hsd->SdCard.CardType != CARD_SDHC_SDXC) + { + BlockAdd *= 512U; + } + + /* Configure the SD DPSM (Data Path State Machine) */ + config.DataTimeOut = SDMMC_DATATIMEOUT; + config.DataLength = BLOCKSIZE * NumberOfBlocks; + config.DataBlockSize = SDIO_DATABLOCK_SIZE_512B; + config.TransferDir = SDIO_TRANSFER_DIR_TO_SDIO; + config.TransferMode = SDIO_TRANSFER_MODE_BLOCK; + config.DPSM = SDIO_DPSM_ENABLE; + SDIO_ConfigData(hsd->Instance, &config); + + /* Set Block Size for Card */ + errorstate = SDMMC_CmdBlockLength(hsd->Instance, BLOCKSIZE); + if(errorstate != HAL_SD_ERROR_NONE) + { + /* Clear all the static flags */ + __HAL_SD_CLEAR_FLAG(hsd, SDIO_STATIC_FLAGS); + hsd->ErrorCode |= errorstate; + hsd->State = HAL_SD_STATE_READY; + return HAL_ERROR; + } + + /* Read Blocks in DMA mode */ + if(NumberOfBlocks > 1U) + { + hsd->Context = (SD_CONTEXT_READ_MULTIPLE_BLOCK | SD_CONTEXT_DMA); + + /* Read Multi Block command */ + errorstate = SDMMC_CmdReadMultiBlock(hsd->Instance, BlockAdd); + } + else + { + hsd->Context = (SD_CONTEXT_READ_SINGLE_BLOCK | SD_CONTEXT_DMA); + + /* Read Single Block command */ + errorstate = SDMMC_CmdReadSingleBlock(hsd->Instance, BlockAdd); + } + if(errorstate != HAL_SD_ERROR_NONE) + { + /* Clear all the static flags */ + __HAL_SD_CLEAR_FLAG(hsd, SDIO_STATIC_FLAGS); + hsd->ErrorCode |= errorstate; + hsd->State = HAL_SD_STATE_READY; + return HAL_ERROR; + } + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Writes block(s) to a specified address in a card. The Data transfer + * is managed by DMA mode. + * @note This API should be followed by a check on the card state through + * HAL_SD_GetCardState(). + * @note You could also check the DMA transfer process through the SD Tx + * interrupt event. + * @param hsd Pointer to SD handle + * @param pData Pointer to the buffer that will contain the data to transmit + * @param BlockAdd Block Address where data will be written + * @param NumberOfBlocks Number of blocks to write + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SD_WriteBlocks_DMA(SD_HandleTypeDef *hsd, uint8_t *pData, uint32_t BlockAdd, uint32_t NumberOfBlocks) +{ + SDIO_DataInitTypeDef config; + uint32_t errorstate = HAL_SD_ERROR_NONE; + + if(NULL == pData) + { + hsd->ErrorCode |= HAL_SD_ERROR_PARAM; + return HAL_ERROR; + } + + if(hsd->State == HAL_SD_STATE_READY) + { + hsd->ErrorCode = HAL_DMA_ERROR_NONE; + + if((BlockAdd + NumberOfBlocks) > (hsd->SdCard.LogBlockNbr)) + { + hsd->ErrorCode |= HAL_SD_ERROR_ADDR_OUT_OF_RANGE; + return HAL_ERROR; + } + + hsd->State = HAL_SD_STATE_BUSY; + + /* Initialize data control register */ + hsd->Instance->DCTRL = 0U; + + /* Enable SD Error interrupts */ +#ifdef SDIO_STA_STBITERR + __HAL_SD_ENABLE_IT(hsd, (SDIO_IT_DCRCFAIL | SDIO_IT_DTIMEOUT | SDIO_IT_TXUNDERR | SDIO_IT_STBITERR)); +#else /* SDIO_STA_STBITERR not defined */ + __HAL_SD_ENABLE_IT(hsd, (SDIO_IT_DCRCFAIL | SDIO_IT_DTIMEOUT | SDIO_IT_TXUNDERR)); +#endif /* SDIO_STA_STBITERR */ + + /* Set the DMA transfer complete callback */ + hsd->hdmatx->XferCpltCallback = SD_DMATransmitCplt; + + /* Set the DMA error callback */ + hsd->hdmatx->XferErrorCallback = SD_DMAError; + + /* Set the DMA Abort callback */ + hsd->hdmatx->XferAbortCallback = NULL; + + if(hsd->SdCard.CardType != CARD_SDHC_SDXC) + { + BlockAdd *= 512U; + } + + /* Set Block Size for Card */ + errorstate = SDMMC_CmdBlockLength(hsd->Instance, BLOCKSIZE); + if(errorstate != HAL_SD_ERROR_NONE) + { + /* Clear all the static flags */ + __HAL_SD_CLEAR_FLAG(hsd, SDIO_STATIC_FLAGS); + hsd->ErrorCode |= errorstate; + hsd->State = HAL_SD_STATE_READY; + return HAL_ERROR; + } + + /* Write Blocks in Polling mode */ + if(NumberOfBlocks > 1U) + { + hsd->Context = (SD_CONTEXT_WRITE_MULTIPLE_BLOCK | SD_CONTEXT_DMA); + + /* Write Multi Block command */ + errorstate = SDMMC_CmdWriteMultiBlock(hsd->Instance, BlockAdd); + } + else + { + hsd->Context = (SD_CONTEXT_WRITE_SINGLE_BLOCK | SD_CONTEXT_DMA); + + /* Write Single Block command */ + errorstate = SDMMC_CmdWriteSingleBlock(hsd->Instance, BlockAdd); + } + if(errorstate != HAL_SD_ERROR_NONE) + { + /* Clear all the static flags */ + __HAL_SD_CLEAR_FLAG(hsd, SDIO_STATIC_FLAGS); + hsd->ErrorCode |= errorstate; + hsd->State = HAL_SD_STATE_READY; + return HAL_ERROR; + } + + /* Enable SDIO DMA transfer */ + __HAL_SD_DMA_ENABLE(hsd); + + /* Enable the DMA Channel */ + HAL_DMA_Start_IT(hsd->hdmatx, (uint32_t)pData, (uint32_t)&hsd->Instance->FIFO, (uint32_t)(BLOCKSIZE * NumberOfBlocks)/4); + + /* Configure the SD DPSM (Data Path State Machine) */ + config.DataTimeOut = SDMMC_DATATIMEOUT; + config.DataLength = BLOCKSIZE * NumberOfBlocks; + config.DataBlockSize = SDIO_DATABLOCK_SIZE_512B; + config.TransferDir = SDIO_TRANSFER_DIR_TO_CARD; + config.TransferMode = SDIO_TRANSFER_MODE_BLOCK; + config.DPSM = SDIO_DPSM_ENABLE; + SDIO_ConfigData(hsd->Instance, &config); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Erases the specified memory area of the given SD card. + * @note This API should be followed by a check on the card state through + * HAL_SD_GetCardState(). + * @param hsd Pointer to SD handle + * @param BlockStartAdd Start Block address + * @param BlockEndAdd End Block address + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SD_Erase(SD_HandleTypeDef *hsd, uint32_t BlockStartAdd, uint32_t BlockEndAdd) +{ + uint32_t errorstate = HAL_SD_ERROR_NONE; + + if(hsd->State == HAL_SD_STATE_READY) + { + hsd->ErrorCode = HAL_DMA_ERROR_NONE; + + if(BlockEndAdd < BlockStartAdd) + { + hsd->ErrorCode |= HAL_SD_ERROR_PARAM; + return HAL_ERROR; + } + + if(BlockEndAdd > (hsd->SdCard.LogBlockNbr)) + { + hsd->ErrorCode |= HAL_SD_ERROR_ADDR_OUT_OF_RANGE; + return HAL_ERROR; + } + + hsd->State = HAL_SD_STATE_BUSY; + + /* Check if the card command class supports erase command */ + if(((hsd->SdCard.Class) & SDIO_CCCC_ERASE) == 0U) + { + /* Clear all the static flags */ + __HAL_SD_CLEAR_FLAG(hsd, SDIO_STATIC_FLAGS); + hsd->ErrorCode |= HAL_SD_ERROR_REQUEST_NOT_APPLICABLE; + hsd->State = HAL_SD_STATE_READY; + return HAL_ERROR; + } + + if((SDIO_GetResponse(hsd->Instance, SDIO_RESP1) & SDMMC_CARD_LOCKED) == SDMMC_CARD_LOCKED) + { + /* Clear all the static flags */ + __HAL_SD_CLEAR_FLAG(hsd, SDIO_STATIC_FLAGS); + hsd->ErrorCode |= HAL_SD_ERROR_LOCK_UNLOCK_FAILED; + hsd->State = HAL_SD_STATE_READY; + return HAL_ERROR; + } + + /* Get start and end block for high capacity cards */ + if(hsd->SdCard.CardType != CARD_SDHC_SDXC) + { + BlockStartAdd *= 512U; + BlockEndAdd *= 512U; + } + + /* According to sd-card spec 1.0 ERASE_GROUP_START (CMD32) and erase_group_end(CMD33) */ + if(hsd->SdCard.CardType != CARD_SECURED) + { + /* Send CMD32 SD_ERASE_GRP_START with argument as addr */ + errorstate = SDMMC_CmdSDEraseStartAdd(hsd->Instance, BlockStartAdd); + if(errorstate != HAL_SD_ERROR_NONE) + { + /* Clear all the static flags */ + __HAL_SD_CLEAR_FLAG(hsd, SDIO_STATIC_FLAGS); + hsd->ErrorCode |= errorstate; + hsd->State = HAL_SD_STATE_READY; + return HAL_ERROR; + } + + /* Send CMD33 SD_ERASE_GRP_END with argument as addr */ + errorstate = SDMMC_CmdSDEraseEndAdd(hsd->Instance, BlockEndAdd); + if(errorstate != HAL_SD_ERROR_NONE) + { + /* Clear all the static flags */ + __HAL_SD_CLEAR_FLAG(hsd, SDIO_STATIC_FLAGS); + hsd->ErrorCode |= errorstate; + hsd->State = HAL_SD_STATE_READY; + return HAL_ERROR; + } + } + + /* Send CMD38 ERASE */ + errorstate = SDMMC_CmdErase(hsd->Instance); + if(errorstate != HAL_SD_ERROR_NONE) + { + /* Clear all the static flags */ + __HAL_SD_CLEAR_FLAG(hsd, SDIO_STATIC_FLAGS); + hsd->ErrorCode |= errorstate; + hsd->State = HAL_SD_STATE_READY; + return HAL_ERROR; + } + + hsd->State = HAL_SD_STATE_READY; + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief This function handles SD card interrupt request. + * @param hsd Pointer to SD handle + * @retval None + */ +void HAL_SD_IRQHandler(SD_HandleTypeDef *hsd) +{ + uint32_t errorstate = HAL_SD_ERROR_NONE; + + /* Check for SDIO interrupt flags */ + if(__HAL_SD_GET_FLAG(hsd, SDIO_IT_DATAEND) != RESET) + { + __HAL_SD_CLEAR_FLAG(hsd, SDIO_FLAG_DATAEND); + +#ifdef SDIO_STA_STBITERR + __HAL_SD_DISABLE_IT(hsd, SDIO_IT_DATAEND | SDIO_IT_DCRCFAIL | SDIO_IT_DTIMEOUT|\ + SDIO_IT_TXUNDERR| SDIO_IT_RXOVERR | SDIO_IT_STBITERR); +#else /* SDIO_STA_STBITERR not defined */ + __HAL_SD_DISABLE_IT(hsd, SDIO_IT_DATAEND | SDIO_IT_DCRCFAIL | SDIO_IT_DTIMEOUT|\ + SDIO_IT_TXUNDERR| SDIO_IT_RXOVERR); +#endif + + if((hsd->Context & SD_CONTEXT_IT) != RESET) + { + if(((hsd->Context & SD_CONTEXT_READ_MULTIPLE_BLOCK) != RESET) || ((hsd->Context & SD_CONTEXT_WRITE_MULTIPLE_BLOCK) != RESET)) + { + errorstate = SDMMC_CmdStopTransfer(hsd->Instance); + if(errorstate != HAL_SD_ERROR_NONE) + { + hsd->ErrorCode |= errorstate; +#if (USE_HAL_SD_REGISTER_CALLBACKS == 1) + hsd->ErrorCallback(hsd); +#else + HAL_SD_ErrorCallback(hsd); +#endif + } + } + + /* Clear all the static flags */ + __HAL_SD_CLEAR_FLAG(hsd, SDIO_STATIC_FLAGS); + + hsd->State = HAL_SD_STATE_READY; + if(((hsd->Context & SD_CONTEXT_READ_SINGLE_BLOCK) != RESET) || ((hsd->Context & SD_CONTEXT_READ_MULTIPLE_BLOCK) != RESET)) + { +#if (USE_HAL_SD_REGISTER_CALLBACKS == 1) + hsd->RxCpltCallback(hsd); +#else + HAL_SD_RxCpltCallback(hsd); +#endif + } + else + { +#if (USE_HAL_SD_REGISTER_CALLBACKS == 1) + hsd->TxCpltCallback(hsd); +#else + HAL_SD_TxCpltCallback(hsd); +#endif + } + } + else if((hsd->Context & SD_CONTEXT_DMA) != RESET) + { + if((hsd->Context & SD_CONTEXT_WRITE_MULTIPLE_BLOCK) != RESET) + { + errorstate = SDMMC_CmdStopTransfer(hsd->Instance); + if(errorstate != HAL_SD_ERROR_NONE) + { + hsd->ErrorCode |= errorstate; +#if (USE_HAL_SD_REGISTER_CALLBACKS == 1) + hsd->ErrorCallback(hsd); +#else + HAL_SD_ErrorCallback(hsd); +#endif + } + } + if(((hsd->Context & SD_CONTEXT_READ_SINGLE_BLOCK) == RESET) && ((hsd->Context & SD_CONTEXT_READ_MULTIPLE_BLOCK) == RESET)) + { + /* Disable the DMA transfer for transmit request by setting the DMAEN bit + in the SD DCTRL register */ + hsd->Instance->DCTRL &= (uint32_t)~((uint32_t)SDIO_DCTRL_DMAEN); + + hsd->State = HAL_SD_STATE_READY; + +#if (USE_HAL_SD_REGISTER_CALLBACKS == 1) + hsd->TxCpltCallback(hsd); +#else + HAL_SD_TxCpltCallback(hsd); +#endif + } + } + } + + else if(__HAL_SD_GET_FLAG(hsd, SDIO_IT_TXFIFOHE) != RESET) + { + __HAL_SD_CLEAR_FLAG(hsd, SDIO_FLAG_TXFIFOHE); + + SD_Write_IT(hsd); + } + + else if(__HAL_SD_GET_FLAG(hsd, SDIO_IT_RXFIFOHF) != RESET) + { + __HAL_SD_CLEAR_FLAG(hsd, SDIO_FLAG_RXFIFOHF); + + SD_Read_IT(hsd); + } + +#ifdef SDIO_STA_STBITERR + else if(__HAL_SD_GET_FLAG(hsd, SDIO_IT_DCRCFAIL | SDIO_IT_DTIMEOUT | SDIO_IT_RXOVERR | SDIO_IT_TXUNDERR | SDIO_IT_STBITERR) != RESET) + { + /* Set Error code */ + if(__HAL_SD_GET_FLAG(hsd, SDIO_IT_DCRCFAIL) != RESET) + { + hsd->ErrorCode |= HAL_SD_ERROR_DATA_CRC_FAIL; + } + if(__HAL_SD_GET_FLAG(hsd, SDIO_IT_DTIMEOUT) != RESET) + { + hsd->ErrorCode |= HAL_SD_ERROR_DATA_TIMEOUT; + } + if(__HAL_SD_GET_FLAG(hsd, SDIO_IT_RXOVERR) != RESET) + { + hsd->ErrorCode |= HAL_SD_ERROR_RX_OVERRUN; + } + if(__HAL_SD_GET_FLAG(hsd, SDIO_IT_TXUNDERR) != RESET) + { + hsd->ErrorCode |= HAL_SD_ERROR_TX_UNDERRUN; + } + if(__HAL_SD_GET_FLAG(hsd, SDIO_IT_STBITERR) != RESET) + { + hsd->ErrorCode |= HAL_SD_ERROR_DATA_TIMEOUT; + } + + /* Clear All flags */ + __HAL_SD_CLEAR_FLAG(hsd, SDIO_STATIC_FLAGS | SDIO_FLAG_STBITERR); + + /* Disable all interrupts */ + __HAL_SD_DISABLE_IT(hsd, SDIO_IT_DATAEND | SDIO_IT_DCRCFAIL | SDIO_IT_DTIMEOUT|\ + SDIO_IT_TXUNDERR| SDIO_IT_RXOVERR |SDIO_IT_STBITERR); + + if((hsd->Context & SD_CONTEXT_DMA) != RESET) + { + /* Abort the SD DMA Streams */ + if(hsd->hdmatx != NULL) + { + /* Set the DMA Tx abort callback */ + hsd->hdmatx->XferAbortCallback = SD_DMATxAbort; + /* Abort DMA in IT mode */ + if(HAL_DMA_Abort_IT(hsd->hdmatx) != HAL_OK) + { + SD_DMATxAbort(hsd->hdmatx); + } + } + else if(hsd->hdmarx != NULL) + { + /* Set the DMA Rx abort callback */ + hsd->hdmarx->XferAbortCallback = SD_DMARxAbort; + /* Abort DMA in IT mode */ + if(HAL_DMA_Abort_IT(hsd->hdmarx) != HAL_OK) + { + SD_DMARxAbort(hsd->hdmarx); + } + } + else + { + hsd->ErrorCode = HAL_SD_ERROR_NONE; + hsd->State = HAL_SD_STATE_READY; +#if (USE_HAL_SD_REGISTER_CALLBACKS == 1) + hsd->AbortCpltCallback(hsd); +#else + HAL_SD_AbortCallback(hsd); +#endif + } + } + else if((hsd->Context & SD_CONTEXT_IT) != RESET) + { + /* Set the SD state to ready to be able to start again the process */ + hsd->State = HAL_SD_STATE_READY; +#if (USE_HAL_SD_REGISTER_CALLBACKS == 1) + hsd->ErrorCallback(hsd); +#else + HAL_SD_ErrorCallback(hsd); +#endif + } + } +#else /* SDIO_STA_STBITERR not defined */ + else if(__HAL_SD_GET_FLAG(hsd, SDIO_IT_DCRCFAIL | SDIO_IT_DTIMEOUT | SDIO_IT_RXOVERR | SDIO_IT_TXUNDERR) != RESET) + { + /* Set Error code */ + if(__HAL_SD_GET_FLAG(hsd, SDIO_IT_DCRCFAIL) != RESET) + { + hsd->ErrorCode |= HAL_SD_ERROR_DATA_CRC_FAIL; + } + if(__HAL_SD_GET_FLAG(hsd, SDIO_IT_DTIMEOUT) != RESET) + { + hsd->ErrorCode |= HAL_SD_ERROR_DATA_TIMEOUT; + } + if(__HAL_SD_GET_FLAG(hsd, SDIO_IT_RXOVERR) != RESET) + { + hsd->ErrorCode |= HAL_SD_ERROR_RX_OVERRUN; + } + if(__HAL_SD_GET_FLAG(hsd, SDIO_IT_TXUNDERR) != RESET) + { + hsd->ErrorCode |= HAL_SD_ERROR_TX_UNDERRUN; + } + + /* Clear All flags */ + __HAL_SD_CLEAR_FLAG(hsd, SDIO_STATIC_FLAGS); + + /* Disable all interrupts */ + __HAL_SD_DISABLE_IT(hsd, SDIO_IT_DATAEND | SDIO_IT_DCRCFAIL | SDIO_IT_DTIMEOUT|\ + SDIO_IT_TXUNDERR| SDIO_IT_RXOVERR); + + if((hsd->Context & SD_CONTEXT_DMA) != RESET) + { + /* Abort the SD DMA Streams */ + if(hsd->hdmatx != NULL) + { + /* Set the DMA Tx abort callback */ + hsd->hdmatx->XferAbortCallback = SD_DMATxAbort; + /* Abort DMA in IT mode */ + if(HAL_DMA_Abort_IT(hsd->hdmatx) != HAL_OK) + { + SD_DMATxAbort(hsd->hdmatx); + } + } + else if(hsd->hdmarx != NULL) + { + /* Set the DMA Rx abort callback */ + hsd->hdmarx->XferAbortCallback = SD_DMARxAbort; + /* Abort DMA in IT mode */ + if(HAL_DMA_Abort_IT(hsd->hdmarx) != HAL_OK) + { + SD_DMARxAbort(hsd->hdmarx); + } + } + else + { + hsd->ErrorCode = HAL_SD_ERROR_NONE; + hsd->State = HAL_SD_STATE_READY; + HAL_SD_AbortCallback(hsd); + } + } + else if((hsd->Context & SD_CONTEXT_IT) != RESET) + { + /* Set the SD state to ready to be able to start again the process */ + hsd->State = HAL_SD_STATE_READY; + HAL_SD_ErrorCallback(hsd); + } + } +#endif +} + +/** + * @brief return the SD state + * @param hsd Pointer to sd handle + * @retval HAL state + */ +HAL_SD_StateTypeDef HAL_SD_GetState(SD_HandleTypeDef *hsd) +{ + return hsd->State; +} + +/** +* @brief Return the SD error code +* @param hsd Pointer to a SD_HandleTypeDef structure that contains + * the configuration information. +* @retval SD Error Code +*/ +uint32_t HAL_SD_GetError(SD_HandleTypeDef *hsd) +{ + return hsd->ErrorCode; +} + +/** + * @brief Tx Transfer completed callbacks + * @param hsd Pointer to SD handle + * @retval None + */ + __weak void HAL_SD_TxCpltCallback(SD_HandleTypeDef *hsd) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hsd); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_SD_TxCpltCallback can be implemented in the user file + */ +} + +/** + * @brief Rx Transfer completed callbacks + * @param hsd Pointer SD handle + * @retval None + */ +__weak void HAL_SD_RxCpltCallback(SD_HandleTypeDef *hsd) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hsd); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_SD_RxCpltCallback can be implemented in the user file + */ +} + +/** + * @brief SD error callbacks + * @param hsd Pointer SD handle + * @retval None + */ +__weak void HAL_SD_ErrorCallback(SD_HandleTypeDef *hsd) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hsd); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_SD_ErrorCallback can be implemented in the user file + */ +} + +/** + * @brief SD Abort callbacks + * @param hsd Pointer SD handle + * @retval None + */ +__weak void HAL_SD_AbortCallback(SD_HandleTypeDef *hsd) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hsd); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_SD_ErrorCallback can be implemented in the user file + */ +} + +#if (USE_HAL_SD_REGISTER_CALLBACKS == 1) +/** + * @brief Register a User SD Callback + * To be used instead of the weak (surcharged) predefined callback + * @param hsd : SD handle + * @param CallbackId : Id of the callback to be registered + * This parameter can be one of the following values: + * @arg @ref HAL_SD_TX_CPLT_CB_ID SD Tx Complete Callback ID + * @arg @ref HAL_SD_RX_CPLT_CB_ID SD Rx Complete Callback ID + * @arg @ref HAL_SD_ERROR_CB_ID SD Error Callback ID + * @arg @ref HAL_SD_ABORT_CB_ID SD Abort Callback ID + * @arg @ref HAL_SD_MSP_INIT_CB_ID SD MspInit Callback ID + * @arg @ref HAL_SD_MSP_DEINIT_CB_ID SD MspDeInit Callback ID + * @param pCallback : pointer to the Callback function + * @retval status + */ +HAL_StatusTypeDef HAL_SD_RegisterCallback(SD_HandleTypeDef *hsd, HAL_SD_CallbackIDTypeDef CallbackId, pSD_CallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if(pCallback == NULL) + { + /* Update the error code */ + hsd->ErrorCode |= HAL_SD_ERROR_INVALID_CALLBACK; + return HAL_ERROR; + } + + /* Process locked */ + __HAL_LOCK(hsd); + + if(hsd->State == HAL_SD_STATE_READY) + { + switch (CallbackId) + { + case HAL_SD_TX_CPLT_CB_ID : + hsd->TxCpltCallback = pCallback; + break; + case HAL_SD_RX_CPLT_CB_ID : + hsd->RxCpltCallback = pCallback; + break; + case HAL_SD_ERROR_CB_ID : + hsd->ErrorCallback = pCallback; + break; + case HAL_SD_ABORT_CB_ID : + hsd->AbortCpltCallback = pCallback; + break; + case HAL_SD_MSP_INIT_CB_ID : + hsd->MspInitCallback = pCallback; + break; + case HAL_SD_MSP_DEINIT_CB_ID : + hsd->MspDeInitCallback = pCallback; + break; + default : + /* Update the error code */ + hsd->ErrorCode |= HAL_SD_ERROR_INVALID_CALLBACK; + /* update return status */ + status = HAL_ERROR; + break; + } + } + else if (hsd->State == HAL_SD_STATE_RESET) + { + switch (CallbackId) + { + case HAL_SD_MSP_INIT_CB_ID : + hsd->MspInitCallback = pCallback; + break; + case HAL_SD_MSP_DEINIT_CB_ID : + hsd->MspDeInitCallback = pCallback; + break; + default : + /* Update the error code */ + hsd->ErrorCode |= HAL_SD_ERROR_INVALID_CALLBACK; + /* update return status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Update the error code */ + hsd->ErrorCode |= HAL_SD_ERROR_INVALID_CALLBACK; + /* update return status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hsd); + return status; +} + +/** + * @brief Unregister a User SD Callback + * SD Callback is redirected to the weak (surcharged) predefined callback + * @param hsd : SD handle + * @param CallbackId : Id of the callback to be unregistered + * This parameter can be one of the following values: + * @arg @ref HAL_SD_TX_CPLT_CB_ID SD Tx Complete Callback ID + * @arg @ref HAL_SD_RX_CPLT_CB_ID SD Rx Complete Callback ID + * @arg @ref HAL_SD_ERROR_CB_ID SD Error Callback ID + * @arg @ref HAL_SD_ABORT_CB_ID SD Abort Callback ID + * @arg @ref HAL_SD_MSP_INIT_CB_ID SD MspInit Callback ID + * @arg @ref HAL_SD_MSP_DEINIT_CB_ID SD MspDeInit Callback ID + * @retval status + */ +HAL_StatusTypeDef HAL_SD_UnRegisterCallback(SD_HandleTypeDef *hsd, HAL_SD_CallbackIDTypeDef CallbackId) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Process locked */ + __HAL_LOCK(hsd); + + if(hsd->State == HAL_SD_STATE_READY) + { + switch (CallbackId) + { + case HAL_SD_TX_CPLT_CB_ID : + hsd->TxCpltCallback = HAL_SD_TxCpltCallback; + break; + case HAL_SD_RX_CPLT_CB_ID : + hsd->RxCpltCallback = HAL_SD_RxCpltCallback; + break; + case HAL_SD_ERROR_CB_ID : + hsd->ErrorCallback = HAL_SD_ErrorCallback; + break; + case HAL_SD_ABORT_CB_ID : + hsd->AbortCpltCallback = HAL_SD_AbortCallback; + break; + case HAL_SD_MSP_INIT_CB_ID : + hsd->MspInitCallback = HAL_SD_MspInit; + break; + case HAL_SD_MSP_DEINIT_CB_ID : + hsd->MspDeInitCallback = HAL_SD_MspDeInit; + break; + default : + /* Update the error code */ + hsd->ErrorCode |= HAL_SD_ERROR_INVALID_CALLBACK; + /* update return status */ + status = HAL_ERROR; + break; + } + } + else if (hsd->State == HAL_SD_STATE_RESET) + { + switch (CallbackId) + { + case HAL_SD_MSP_INIT_CB_ID : + hsd->MspInitCallback = HAL_SD_MspInit; + break; + case HAL_SD_MSP_DEINIT_CB_ID : + hsd->MspDeInitCallback = HAL_SD_MspDeInit; + break; + default : + /* Update the error code */ + hsd->ErrorCode |= HAL_SD_ERROR_INVALID_CALLBACK; + /* update return status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Update the error code */ + hsd->ErrorCode |= HAL_SD_ERROR_INVALID_CALLBACK; + /* update return status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hsd); + return status; +} +#endif + +/** + * @} + */ + +/** @addtogroup SD_Exported_Functions_Group3 + * @brief management functions + * +@verbatim + ============================================================================== + ##### Peripheral Control functions ##### + ============================================================================== + [..] + This subsection provides a set of functions allowing to control the SD card + operations and get the related information + +@endverbatim + * @{ + */ + +/** + * @brief Returns information the information of the card which are stored on + * the CID register. + * @param hsd Pointer to SD handle + * @param pCID Pointer to a HAL_SD_CIDTypeDef structure that + * contains all CID register parameters + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SD_GetCardCID(SD_HandleTypeDef *hsd, HAL_SD_CardCIDTypeDef *pCID) +{ + uint32_t tmp = 0U; + + /* Byte 0 */ + tmp = (uint8_t)((hsd->CID[0U] & 0xFF000000U) >> 24U); + pCID->ManufacturerID = tmp; + + /* Byte 1 */ + tmp = (uint8_t)((hsd->CID[0U] & 0x00FF0000U) >> 16U); + pCID->OEM_AppliID = tmp << 8U; + + /* Byte 2 */ + tmp = (uint8_t)((hsd->CID[0U] & 0x000000FF00U) >> 8U); + pCID->OEM_AppliID |= tmp; + + /* Byte 3 */ + tmp = (uint8_t)(hsd->CID[0U] & 0x000000FFU); + pCID->ProdName1 = tmp << 24U; + + /* Byte 4 */ + tmp = (uint8_t)((hsd->CID[1U] & 0xFF000000U) >> 24U); + pCID->ProdName1 |= tmp << 16; + + /* Byte 5 */ + tmp = (uint8_t)((hsd->CID[1U] & 0x00FF0000U) >> 16U); + pCID->ProdName1 |= tmp << 8U; + + /* Byte 6 */ + tmp = (uint8_t)((hsd->CID[1U] & 0x0000FF00U) >> 8U); + pCID->ProdName1 |= tmp; + + /* Byte 7 */ + tmp = (uint8_t)(hsd->CID[1U] & 0x000000FFU); + pCID->ProdName2 = tmp; + + /* Byte 8 */ + tmp = (uint8_t)((hsd->CID[2U] & 0xFF000000U) >> 24U); + pCID->ProdRev = tmp; + + /* Byte 9 */ + tmp = (uint8_t)((hsd->CID[2U] & 0x00FF0000U) >> 16U); + pCID->ProdSN = tmp << 24U; + + /* Byte 10 */ + tmp = (uint8_t)((hsd->CID[2U] & 0x0000FF00U) >> 8U); + pCID->ProdSN |= tmp << 16U; + + /* Byte 11 */ + tmp = (uint8_t)(hsd->CID[2U] & 0x000000FFU); + pCID->ProdSN |= tmp << 8U; + + /* Byte 12 */ + tmp = (uint8_t)((hsd->CID[3U] & 0xFF000000U) >> 24U); + pCID->ProdSN |= tmp; + + /* Byte 13 */ + tmp = (uint8_t)((hsd->CID[3U] & 0x00FF0000U) >> 16U); + pCID->Reserved1 |= (tmp & 0xF0U) >> 4U; + pCID->ManufactDate = (tmp & 0x0FU) << 8U; + + /* Byte 14 */ + tmp = (uint8_t)((hsd->CID[3U] & 0x0000FF00U) >> 8U); + pCID->ManufactDate |= tmp; + + /* Byte 15 */ + tmp = (uint8_t)(hsd->CID[3U] & 0x000000FFU); + pCID->CID_CRC = (tmp & 0xFEU) >> 1U; + pCID->Reserved2 = 1U; + + return HAL_OK; +} + +/** + * @brief Returns information the information of the card which are stored on + * the CSD register. + * @param hsd Pointer to SD handle + * @param pCSD Pointer to a HAL_SD_CardCSDTypeDef structure that + * contains all CSD register parameters + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SD_GetCardCSD(SD_HandleTypeDef *hsd, HAL_SD_CardCSDTypeDef *pCSD) +{ + uint32_t tmp = 0U; + + /* Byte 0 */ + tmp = (hsd->CSD[0U] & 0xFF000000U) >> 24U; + pCSD->CSDStruct = (uint8_t)((tmp & 0xC0U) >> 6U); + pCSD->SysSpecVersion = (uint8_t)((tmp & 0x3CU) >> 2U); + pCSD->Reserved1 = tmp & 0x03U; + + /* Byte 1 */ + tmp = (hsd->CSD[0U] & 0x00FF0000U) >> 16U; + pCSD->TAAC = (uint8_t)tmp; + + /* Byte 2 */ + tmp = (hsd->CSD[0U] & 0x0000FF00U) >> 8U; + pCSD->NSAC = (uint8_t)tmp; + + /* Byte 3 */ + tmp = hsd->CSD[0U] & 0x000000FFU; + pCSD->MaxBusClkFrec = (uint8_t)tmp; + + /* Byte 4 */ + tmp = (hsd->CSD[1U] & 0xFF000000U) >> 24U; + pCSD->CardComdClasses = (uint16_t)(tmp << 4U); + + /* Byte 5 */ + tmp = (hsd->CSD[1U] & 0x00FF0000U) >> 16U; + pCSD->CardComdClasses |= (uint16_t)((tmp & 0xF0U) >> 4U); + pCSD->RdBlockLen = (uint8_t)(tmp & 0x0FU); + + /* Byte 6 */ + tmp = (hsd->CSD[1U] & 0x0000FF00U) >> 8U; + pCSD->PartBlockRead = (uint8_t)((tmp & 0x80U) >> 7U); + pCSD->WrBlockMisalign = (uint8_t)((tmp & 0x40U) >> 6U); + pCSD->RdBlockMisalign = (uint8_t)((tmp & 0x20U) >> 5U); + pCSD->DSRImpl = (uint8_t)((tmp & 0x10U) >> 4U); + pCSD->Reserved2 = 0U; /*!< Reserved */ + + if(hsd->SdCard.CardType == CARD_SDSC) + { + pCSD->DeviceSize = (tmp & 0x03U) << 10U; + + /* Byte 7 */ + tmp = (uint8_t)(hsd->CSD[1U] & 0x000000FFU); + pCSD->DeviceSize |= (tmp) << 2U; + + /* Byte 8 */ + tmp = (uint8_t)((hsd->CSD[2U] & 0xFF000000U) >> 24U); + pCSD->DeviceSize |= (tmp & 0xC0U) >> 6U; + + pCSD->MaxRdCurrentVDDMin = (tmp & 0x38U) >> 3U; + pCSD->MaxRdCurrentVDDMax = (tmp & 0x07U); + + /* Byte 9 */ + tmp = (uint8_t)((hsd->CSD[2U] & 0x00FF0000U) >> 16U); + pCSD->MaxWrCurrentVDDMin = (tmp & 0xE0U) >> 5U; + pCSD->MaxWrCurrentVDDMax = (tmp & 0x1CU) >> 2U; + pCSD->DeviceSizeMul = (tmp & 0x03U) << 1U; + /* Byte 10 */ + tmp = (uint8_t)((hsd->CSD[2U] & 0x0000FF00U) >> 8U); + pCSD->DeviceSizeMul |= (tmp & 0x80U) >> 7U; + + hsd->SdCard.BlockNbr = (pCSD->DeviceSize + 1U) ; + hsd->SdCard.BlockNbr *= (1U << (pCSD->DeviceSizeMul + 2U)); + hsd->SdCard.BlockSize = 1U << (pCSD->RdBlockLen); + + hsd->SdCard.LogBlockNbr = (hsd->SdCard.BlockNbr) * ((hsd->SdCard.BlockSize) / 512U); + hsd->SdCard.LogBlockSize = 512U; + } + else if(hsd->SdCard.CardType == CARD_SDHC_SDXC) + { + /* Byte 7 */ + tmp = (uint8_t)(hsd->CSD[1U] & 0x000000FFU); + pCSD->DeviceSize = (tmp & 0x3FU) << 16U; + + /* Byte 8 */ + tmp = (uint8_t)((hsd->CSD[2U] & 0xFF000000U) >> 24U); + + pCSD->DeviceSize |= (tmp << 8U); + + /* Byte 9 */ + tmp = (uint8_t)((hsd->CSD[2U] & 0x00FF0000U) >> 16U); + + pCSD->DeviceSize |= (tmp); + + /* Byte 10 */ + tmp = (uint8_t)((hsd->CSD[2U] & 0x0000FF00U) >> 8U); + + hsd->SdCard.LogBlockNbr = hsd->SdCard.BlockNbr = (((uint64_t)pCSD->DeviceSize + 1U) * 1024U); + hsd->SdCard.LogBlockSize = hsd->SdCard.BlockSize = 512U; + } + else + { + /* Clear all the static flags */ + __HAL_SD_CLEAR_FLAG(hsd, SDIO_STATIC_FLAGS); + hsd->ErrorCode |= HAL_SD_ERROR_UNSUPPORTED_FEATURE; + hsd->State = HAL_SD_STATE_READY; + return HAL_ERROR; + } + + pCSD->EraseGrSize = (tmp & 0x40U) >> 6U; + pCSD->EraseGrMul = (tmp & 0x3FU) << 1U; + + /* Byte 11 */ + tmp = (uint8_t)(hsd->CSD[2U] & 0x000000FFU); + pCSD->EraseGrMul |= (tmp & 0x80U) >> 7U; + pCSD->WrProtectGrSize = (tmp & 0x7FU); + + /* Byte 12 */ + tmp = (uint8_t)((hsd->CSD[3U] & 0xFF000000U) >> 24U); + pCSD->WrProtectGrEnable = (tmp & 0x80U) >> 7U; + pCSD->ManDeflECC = (tmp & 0x60U) >> 5U; + pCSD->WrSpeedFact = (tmp & 0x1CU) >> 2U; + pCSD->MaxWrBlockLen = (tmp & 0x03U) << 2U; + + /* Byte 13 */ + tmp = (uint8_t)((hsd->CSD[3U] & 0x00FF0000U) >> 16U); + pCSD->MaxWrBlockLen |= (tmp & 0xC0U) >> 6U; + pCSD->WriteBlockPaPartial = (tmp & 0x20U) >> 5U; + pCSD->Reserved3 = 0U; + pCSD->ContentProtectAppli = (tmp & 0x01U); + + /* Byte 14 */ + tmp = (uint8_t)((hsd->CSD[3U] & 0x0000FF00U) >> 8U); + pCSD->FileFormatGrouop = (tmp & 0x80U) >> 7U; + pCSD->CopyFlag = (tmp & 0x40U) >> 6U; + pCSD->PermWrProtect = (tmp & 0x20U) >> 5U; + pCSD->TempWrProtect = (tmp & 0x10U) >> 4U; + pCSD->FileFormat = (tmp & 0x0CU) >> 2U; + pCSD->ECC = (tmp & 0x03U); + + /* Byte 15 */ + tmp = (uint8_t)(hsd->CSD[3U] & 0x000000FFU); + pCSD->CSD_CRC = (tmp & 0xFEU) >> 1U; + pCSD->Reserved4 = 1U; + + return HAL_OK; +} + +/** + * @brief Gets the SD status info. + * @param hsd Pointer to SD handle + * @param pStatus Pointer to the HAL_SD_CardStatusTypeDef structure that + * will contain the SD card status information + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SD_GetCardStatus(SD_HandleTypeDef *hsd, HAL_SD_CardStatusTypeDef *pStatus) +{ + uint32_t tmp = 0U; + uint32_t sd_status[16U]; + uint32_t errorstate = HAL_SD_ERROR_NONE; + + errorstate = SD_SendSDStatus(hsd, sd_status); + if(errorstate != HAL_OK) + { + /* Clear all the static flags */ + __HAL_SD_CLEAR_FLAG(hsd, SDIO_STATIC_FLAGS); + hsd->ErrorCode |= errorstate; + hsd->State = HAL_SD_STATE_READY; + return HAL_ERROR; + } + else + { + /* Byte 0 */ + tmp = (sd_status[0U] & 0xC0U) >> 6U; + pStatus->DataBusWidth = (uint8_t)tmp; + + /* Byte 0 */ + tmp = (sd_status[0U] & 0x20U) >> 5U; + pStatus->SecuredMode = (uint8_t)tmp; + + /* Byte 2 */ + tmp = (sd_status[0U] & 0x00FF0000U) >> 16U; + pStatus->CardType = (uint16_t)(tmp << 8U); + + /* Byte 3 */ + tmp = (sd_status[0U] & 0xFF000000U) >> 24U; + pStatus->CardType |= (uint16_t)tmp; + + /* Byte 4 */ + tmp = (sd_status[1U] & 0xFFU); + pStatus->ProtectedAreaSize = (uint32_t)(tmp << 24U); + + /* Byte 5 */ + tmp = (sd_status[1U] & 0xFF00U) >> 8U; + pStatus->ProtectedAreaSize |= (uint32_t)(tmp << 16U); + + /* Byte 6 */ + tmp = (sd_status[1U] & 0xFF0000U) >> 16U; + pStatus->ProtectedAreaSize |= (uint32_t)(tmp << 8U); + + /* Byte 7 */ + tmp = (sd_status[1U] & 0xFF000000U) >> 24U; + pStatus->ProtectedAreaSize |= (uint32_t)tmp; + + /* Byte 8 */ + tmp = (sd_status[2U] & 0xFFU); + pStatus->SpeedClass = (uint8_t)tmp; + + /* Byte 9 */ + tmp = (sd_status[2U] & 0xFF00U) >> 8U; + pStatus->PerformanceMove = (uint8_t)tmp; + + /* Byte 10 */ + tmp = (sd_status[2U] & 0xF00000U) >> 20U; + pStatus->AllocationUnitSize = (uint8_t)tmp; + + /* Byte 11 */ + tmp = (sd_status[2U] & 0xFF000000U) >> 24U; + pStatus->EraseSize = (uint16_t)(tmp << 8U); + + /* Byte 12 */ + tmp = (sd_status[3U] & 0xFFU); + pStatus->EraseSize |= (uint16_t)tmp; + + /* Byte 13 */ + tmp = (sd_status[3U] & 0xFC00U) >> 10U; + pStatus->EraseTimeout = (uint8_t)tmp; + + /* Byte 13 */ + tmp = (sd_status[3U] & 0x0300U) >> 8U; + pStatus->EraseOffset = (uint8_t)tmp; + } + + return HAL_OK; +} + +/** + * @brief Gets the SD card info. + * @param hsd Pointer to SD handle + * @param pCardInfo Pointer to the HAL_SD_CardInfoTypeDef structure that + * will contain the SD card status information + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SD_GetCardInfo(SD_HandleTypeDef *hsd, HAL_SD_CardInfoTypeDef *pCardInfo) +{ + pCardInfo->CardType = (uint32_t)(hsd->SdCard.CardType); + pCardInfo->CardVersion = (uint32_t)(hsd->SdCard.CardVersion); + pCardInfo->Class = (uint32_t)(hsd->SdCard.Class); + pCardInfo->RelCardAdd = (uint32_t)(hsd->SdCard.RelCardAdd); + pCardInfo->BlockNbr = (uint32_t)(hsd->SdCard.BlockNbr); + pCardInfo->BlockSize = (uint32_t)(hsd->SdCard.BlockSize); + pCardInfo->LogBlockNbr = (uint32_t)(hsd->SdCard.LogBlockNbr); + pCardInfo->LogBlockSize = (uint32_t)(hsd->SdCard.LogBlockSize); + + return HAL_OK; +} + +/** + * @brief Enables wide bus operation for the requested card if supported by + * card. + * @param hsd Pointer to SD handle + * @param WideMode Specifies the SD card wide bus mode + * This parameter can be one of the following values: + * @arg SDIO_BUS_WIDE_8B: 8-bit data transfer + * @arg SDIO_BUS_WIDE_4B: 4-bit data transfer + * @arg SDIO_BUS_WIDE_1B: 1-bit data transfer + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SD_ConfigWideBusOperation(SD_HandleTypeDef *hsd, uint32_t WideMode) +{ + SDIO_InitTypeDef Init; + uint32_t errorstate = HAL_SD_ERROR_NONE; + + /* Check the parameters */ + assert_param(IS_SDIO_BUS_WIDE(WideMode)); + + /* Chnage Satte */ + hsd->State = HAL_SD_STATE_BUSY; + + if(hsd->SdCard.CardType != CARD_SECURED) + { + if(WideMode == SDIO_BUS_WIDE_8B) + { + hsd->ErrorCode |= HAL_SD_ERROR_UNSUPPORTED_FEATURE; + } + else if(WideMode == SDIO_BUS_WIDE_4B) + { + errorstate = SD_WideBus_Enable(hsd); + + hsd->ErrorCode |= errorstate; + } + else if(WideMode == SDIO_BUS_WIDE_1B) + { + errorstate = SD_WideBus_Disable(hsd); + + hsd->ErrorCode |= errorstate; + } + else + { + /* WideMode is not a valid argument*/ + hsd->ErrorCode |= HAL_SD_ERROR_PARAM; + } + } + else + { + /* MMC Card does not support this feature */ + hsd->ErrorCode |= HAL_SD_ERROR_UNSUPPORTED_FEATURE; + } + + if(hsd->ErrorCode != HAL_SD_ERROR_NONE) + { + /* Clear all the static flags */ + __HAL_SD_CLEAR_FLAG(hsd, SDIO_STATIC_FLAGS); + hsd->State = HAL_SD_STATE_READY; + return HAL_ERROR; + } + else + { + /* Configure the SDIO peripheral */ + Init.ClockEdge = hsd->Init.ClockEdge; + Init.ClockBypass = hsd->Init.ClockBypass; + Init.ClockPowerSave = hsd->Init.ClockPowerSave; + Init.BusWide = WideMode; + Init.HardwareFlowControl = hsd->Init.HardwareFlowControl; + Init.ClockDiv = hsd->Init.ClockDiv; + SDIO_Init(hsd->Instance, Init); + } + + /* Change State */ + hsd->State = HAL_SD_STATE_READY; + + return HAL_OK; +} + + +/** + * @brief Gets the current sd card data state. + * @param hsd pointer to SD handle + * @retval Card state + */ +HAL_SD_CardStateTypeDef HAL_SD_GetCardState(SD_HandleTypeDef *hsd) +{ + HAL_SD_CardStateTypeDef cardstate = HAL_SD_CARD_TRANSFER; + uint32_t errorstate = HAL_SD_ERROR_NONE; + uint32_t resp1 = 0; + + errorstate = SD_SendStatus(hsd, &resp1); + if(errorstate != HAL_OK) + { + hsd->ErrorCode |= errorstate; + } + + cardstate = (HAL_SD_CardStateTypeDef)((resp1 >> 9U) & 0x0FU); + + return cardstate; +} + +/** + * @brief Abort the current transfer and disable the SD. + * @param hsd pointer to a SD_HandleTypeDef structure that contains + * the configuration information for SD module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SD_Abort(SD_HandleTypeDef *hsd) +{ + HAL_SD_CardStateTypeDef CardState; + + /* DIsable All interrupts */ + __HAL_SD_DISABLE_IT(hsd, SDIO_IT_DATAEND | SDIO_IT_DCRCFAIL | SDIO_IT_DTIMEOUT|\ + SDIO_IT_TXUNDERR| SDIO_IT_RXOVERR); + + /* Clear All flags */ + __HAL_SD_CLEAR_FLAG(hsd, SDIO_STATIC_FLAGS); + + if((hsd->hdmatx != NULL) || (hsd->hdmarx != NULL)) + { + /* Disable the SD DMA request */ + hsd->Instance->DCTRL &= (uint32_t)~((uint32_t)SDIO_DCTRL_DMAEN); + + /* Abort the SD DMA Tx Stream */ + if(hsd->hdmatx != NULL) + { + HAL_DMA_Abort(hsd->hdmatx); + } + /* Abort the SD DMA Rx Stream */ + if(hsd->hdmarx != NULL) + { + HAL_DMA_Abort(hsd->hdmarx); + } + } + + hsd->State = HAL_SD_STATE_READY; + CardState = HAL_SD_GetCardState(hsd); + if((CardState == HAL_SD_CARD_RECEIVING) || (CardState == HAL_SD_CARD_SENDING)) + { + hsd->ErrorCode = SDMMC_CmdStopTransfer(hsd->Instance); + } + if(hsd->ErrorCode != HAL_SD_ERROR_NONE) + { + return HAL_ERROR; + } + return HAL_OK; +} + +/** + * @brief Abort the current transfer and disable the SD (IT mode). + * @param hsd pointer to a SD_HandleTypeDef structure that contains + * the configuration information for SD module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SD_Abort_IT(SD_HandleTypeDef *hsd) +{ + HAL_SD_CardStateTypeDef CardState; + + /* DIsable All interrupts */ + __HAL_SD_DISABLE_IT(hsd, SDIO_IT_DATAEND | SDIO_IT_DCRCFAIL | SDIO_IT_DTIMEOUT|\ + SDIO_IT_TXUNDERR| SDIO_IT_RXOVERR); + + /* Clear All flags */ + __HAL_SD_CLEAR_FLAG(hsd, SDIO_STATIC_FLAGS); + + if((hsd->hdmatx != NULL) || (hsd->hdmarx != NULL)) + { + /* Disable the SD DMA request */ + hsd->Instance->DCTRL &= (uint32_t)~((uint32_t)SDIO_DCTRL_DMAEN); + + /* Abort the SD DMA Tx Stream */ + if(hsd->hdmatx != NULL) + { + hsd->hdmatx->XferAbortCallback = SD_DMATxAbort; + if(HAL_DMA_Abort_IT(hsd->hdmatx) != HAL_OK) + { + hsd->hdmatx = NULL; + } + } + /* Abort the SD DMA Rx Stream */ + if(hsd->hdmarx != NULL) + { + hsd->hdmarx->XferAbortCallback = SD_DMARxAbort; + if(HAL_DMA_Abort_IT(hsd->hdmarx) != HAL_OK) + { + hsd->hdmarx = NULL; + } + } + } + + /* No transfer ongoing on both DMA channels*/ + if((hsd->hdmatx == NULL) && (hsd->hdmarx == NULL)) + { + CardState = HAL_SD_GetCardState(hsd); + hsd->State = HAL_SD_STATE_READY; + if((CardState == HAL_SD_CARD_RECEIVING) || (CardState == HAL_SD_CARD_SENDING)) + { + hsd->ErrorCode = SDMMC_CmdStopTransfer(hsd->Instance); + } + if(hsd->ErrorCode != HAL_SD_ERROR_NONE) + { + return HAL_ERROR; + } + else + { +#if (USE_HAL_SD_REGISTER_CALLBACKS == 1) + hsd->AbortCpltCallback(hsd); +#else + HAL_SD_AbortCallback(hsd); +#endif + } + } + + return HAL_OK; +} + +/** + * @} + */ + +/** + * @} + */ + +/* Private function ----------------------------------------------------------*/ +/** @addtogroup SD_Private_Functions + * @{ + */ + +/** + * @brief DMA SD transmit process complete callback + * @param hdma DMA handle + * @retval None + */ +static void SD_DMATransmitCplt(DMA_HandleTypeDef *hdma) +{ + SD_HandleTypeDef* hsd = (SD_HandleTypeDef* )(hdma->Parent); + + /* Enable DATAEND Interrupt */ + __HAL_SD_ENABLE_IT(hsd, (SDIO_IT_DATAEND)); +} + +/** + * @brief DMA SD receive process complete callback + * @param hdma DMA handle + * @retval None + */ +static void SD_DMAReceiveCplt(DMA_HandleTypeDef *hdma) +{ + SD_HandleTypeDef* hsd = (SD_HandleTypeDef* )(hdma->Parent); + uint32_t errorstate = HAL_SD_ERROR_NONE; + + /* Send stop command in multiblock write */ + if(hsd->Context == (SD_CONTEXT_READ_MULTIPLE_BLOCK | SD_CONTEXT_DMA)) + { + errorstate = SDMMC_CmdStopTransfer(hsd->Instance); + if(errorstate != HAL_SD_ERROR_NONE) + { + hsd->ErrorCode |= errorstate; +#if (USE_HAL_SD_REGISTER_CALLBACKS == 1) + hsd->ErrorCallback(hsd); +#else + HAL_SD_ErrorCallback(hsd); +#endif + } + } + + /* Disable the DMA transfer for transmit request by setting the DMAEN bit + in the SD DCTRL register */ + hsd->Instance->DCTRL &= (uint32_t)~((uint32_t)SDIO_DCTRL_DMAEN); + + /* Clear all the static flags */ + __HAL_SD_CLEAR_FLAG(hsd, SDIO_STATIC_FLAGS); + + hsd->State = HAL_SD_STATE_READY; + +#if (USE_HAL_SD_REGISTER_CALLBACKS == 1) + hsd->RxCpltCallback(hsd); +#else + HAL_SD_RxCpltCallback(hsd); +#endif +} + +/** + * @brief DMA SD communication error callback + * @param hdma DMA handle + * @retval None + */ +static void SD_DMAError(DMA_HandleTypeDef *hdma) +{ + SD_HandleTypeDef* hsd = (SD_HandleTypeDef* )(hdma->Parent); + HAL_SD_CardStateTypeDef CardState; + + if((hsd->hdmarx->ErrorCode == HAL_DMA_ERROR_TE) || (hsd->hdmatx->ErrorCode == HAL_DMA_ERROR_TE)) + { + /* Clear All flags */ + __HAL_SD_CLEAR_FLAG(hsd, SDIO_STATIC_FLAGS); + + /* Disable All interrupts */ + __HAL_SD_DISABLE_IT(hsd, SDIO_IT_DATAEND | SDIO_IT_DCRCFAIL | SDIO_IT_DTIMEOUT|\ + SDIO_IT_TXUNDERR| SDIO_IT_RXOVERR); + + hsd->ErrorCode |= HAL_SD_ERROR_DMA; + CardState = HAL_SD_GetCardState(hsd); + if((CardState == HAL_SD_CARD_RECEIVING) || (CardState == HAL_SD_CARD_SENDING)) + { + hsd->ErrorCode |= SDMMC_CmdStopTransfer(hsd->Instance); + } + + hsd->State= HAL_SD_STATE_READY; + } + +#if (USE_HAL_SD_REGISTER_CALLBACKS == 1) + hsd->ErrorCallback(hsd); +#else + HAL_SD_ErrorCallback(hsd); +#endif +} + +/** + * @brief DMA SD Tx Abort callback + * @param hdma DMA handle + * @retval None + */ +static void SD_DMATxAbort(DMA_HandleTypeDef *hdma) +{ + SD_HandleTypeDef* hsd = (SD_HandleTypeDef* )(hdma->Parent); + HAL_SD_CardStateTypeDef CardState; + + if(hsd->hdmatx != NULL) + { + hsd->hdmatx = NULL; + } + + /* All DMA channels are aborted */ + if(hsd->hdmarx == NULL) + { + CardState = HAL_SD_GetCardState(hsd); + hsd->ErrorCode = HAL_SD_ERROR_NONE; + hsd->State = HAL_SD_STATE_READY; + if((CardState == HAL_SD_CARD_RECEIVING) || (CardState == HAL_SD_CARD_SENDING)) + { + hsd->ErrorCode |= SDMMC_CmdStopTransfer(hsd->Instance); + + if(hsd->ErrorCode != HAL_SD_ERROR_NONE) + { +#if (USE_HAL_SD_REGISTER_CALLBACKS == 1) + hsd->AbortCpltCallback(hsd); +#else + HAL_SD_AbortCallback(hsd); +#endif + } + else + { +#if (USE_HAL_SD_REGISTER_CALLBACKS == 1) + hsd->ErrorCallback(hsd); +#else + HAL_SD_ErrorCallback(hsd); +#endif + } + } + } +} + +/** + * @brief DMA SD Rx Abort callback + * @param hdma DMA handle + * @retval None + */ +static void SD_DMARxAbort(DMA_HandleTypeDef *hdma) +{ + SD_HandleTypeDef* hsd = (SD_HandleTypeDef* )(hdma->Parent); + HAL_SD_CardStateTypeDef CardState; + + if(hsd->hdmarx != NULL) + { + hsd->hdmarx = NULL; + } + + /* All DMA channels are aborted */ + if(hsd->hdmatx == NULL) + { + CardState = HAL_SD_GetCardState(hsd); + hsd->ErrorCode = HAL_SD_ERROR_NONE; + hsd->State = HAL_SD_STATE_READY; + if((CardState == HAL_SD_CARD_RECEIVING) || (CardState == HAL_SD_CARD_SENDING)) + { + hsd->ErrorCode |= SDMMC_CmdStopTransfer(hsd->Instance); + + if(hsd->ErrorCode != HAL_SD_ERROR_NONE) + { +#if (USE_HAL_SD_REGISTER_CALLBACKS == 1) + hsd->AbortCpltCallback(hsd); +#else + HAL_SD_AbortCallback(hsd); +#endif + } + else + { +#if (USE_HAL_SD_REGISTER_CALLBACKS == 1) + hsd->ErrorCallback(hsd); +#else + HAL_SD_ErrorCallback(hsd); +#endif + } + } + } +} + + +/** + * @brief Initializes the sd card. + * @param hsd Pointer to SD handle + * @retval SD Card error state + */ +static uint32_t SD_InitCard(SD_HandleTypeDef *hsd) +{ + HAL_SD_CardCSDTypeDef CSD; + uint32_t errorstate = HAL_SD_ERROR_NONE; + uint16_t sd_rca = 1U; + + /* Check the power State */ + if(SDIO_GetPowerState(hsd->Instance) == 0U) + { + /* Power off */ + return HAL_SD_ERROR_REQUEST_NOT_APPLICABLE; + } + + if(hsd->SdCard.CardType != CARD_SECURED) + { + /* Send CMD2 ALL_SEND_CID */ + errorstate = SDMMC_CmdSendCID(hsd->Instance); + if(errorstate != HAL_SD_ERROR_NONE) + { + return errorstate; + } + else + { + /* Get Card identification number data */ + hsd->CID[0U] = SDIO_GetResponse(hsd->Instance, SDIO_RESP1); + hsd->CID[1U] = SDIO_GetResponse(hsd->Instance, SDIO_RESP2); + hsd->CID[2U] = SDIO_GetResponse(hsd->Instance, SDIO_RESP3); + hsd->CID[3U] = SDIO_GetResponse(hsd->Instance, SDIO_RESP4); + } + } + + if(hsd->SdCard.CardType != CARD_SECURED) + { + /* Send CMD3 SET_REL_ADDR with argument 0 */ + /* SD Card publishes its RCA. */ + errorstate = SDMMC_CmdSetRelAdd(hsd->Instance, &sd_rca); + if(errorstate != HAL_SD_ERROR_NONE) + { + return errorstate; + } + } + if(hsd->SdCard.CardType != CARD_SECURED) + { + /* Get the SD card RCA */ + hsd->SdCard.RelCardAdd = sd_rca; + + /* Send CMD9 SEND_CSD with argument as card's RCA */ + errorstate = SDMMC_CmdSendCSD(hsd->Instance, (uint32_t)(hsd->SdCard.RelCardAdd << 16U)); + if(errorstate != HAL_SD_ERROR_NONE) + { + return errorstate; + } + else + { + /* Get Card Specific Data */ + hsd->CSD[0U] = SDIO_GetResponse(hsd->Instance, SDIO_RESP1); + hsd->CSD[1U] = SDIO_GetResponse(hsd->Instance, SDIO_RESP2); + hsd->CSD[2U] = SDIO_GetResponse(hsd->Instance, SDIO_RESP3); + hsd->CSD[3U] = SDIO_GetResponse(hsd->Instance, SDIO_RESP4); + } + } + + /* Get the Card Class */ + hsd->SdCard.Class = (SDIO_GetResponse(hsd->Instance, SDIO_RESP2) >> 20U); + + /* Get CSD parameters */ + HAL_SD_GetCardCSD(hsd, &CSD); + + /* Select the Card */ + errorstate = SDMMC_CmdSelDesel(hsd->Instance, (uint32_t)(((uint32_t)hsd->SdCard.RelCardAdd) << 16U)); + if(errorstate != HAL_SD_ERROR_NONE) + { + return errorstate; + } + + /* Configure SDIO peripheral interface */ + SDIO_Init(hsd->Instance, hsd->Init); + + /* All cards are initialized */ + return HAL_SD_ERROR_NONE; +} + +/** + * @brief Enquires cards about their operating voltage and configures clock + * controls and stores SD information that will be needed in future + * in the SD handle. + * @param hsd Pointer to SD handle + * @retval error state + */ +static uint32_t SD_PowerON(SD_HandleTypeDef *hsd) +{ + __IO uint32_t count = 0U; + uint32_t response = 0U, validvoltage = 0U; + uint32_t errorstate = HAL_SD_ERROR_NONE; + + /* CMD0: GO_IDLE_STATE */ + errorstate = SDMMC_CmdGoIdleState(hsd->Instance); + if(errorstate != HAL_SD_ERROR_NONE) + { + return errorstate; + } + + /* CMD8: SEND_IF_COND: Command available only on V2.0 cards */ + errorstate = SDMMC_CmdOperCond(hsd->Instance); + if(errorstate != HAL_SD_ERROR_NONE) + { + hsd->SdCard.CardVersion = CARD_V1_X; + + /* Send ACMD41 SD_APP_OP_COND with Argument 0x80100000 */ + while(validvoltage == 0U) + { + if(count++ == SDMMC_MAX_VOLT_TRIAL) + { + return HAL_SD_ERROR_INVALID_VOLTRANGE; + } + + /* SEND CMD55 APP_CMD with RCA as 0 */ + errorstate = SDMMC_CmdAppCommand(hsd->Instance, 0U); + if(errorstate != HAL_SD_ERROR_NONE) + { + return HAL_SD_ERROR_UNSUPPORTED_FEATURE; + } + + /* Send CMD41 */ + errorstate = SDMMC_CmdAppOperCommand(hsd->Instance, SDMMC_STD_CAPACITY); + if(errorstate != HAL_SD_ERROR_NONE) + { + return HAL_SD_ERROR_UNSUPPORTED_FEATURE; + } + + /* Get command response */ + response = SDIO_GetResponse(hsd->Instance, SDIO_RESP1); + + /* Get operating voltage*/ + validvoltage = (((response >> 31U) == 1U) ? 1U : 0U); + } + /* Card type is SDSC */ + hsd->SdCard.CardType = CARD_SDSC; + } + else + { + hsd->SdCard.CardVersion = CARD_V2_X; + + /* Send ACMD41 SD_APP_OP_COND with Argument 0x80100000 */ + while(validvoltage == 0U) + { + if(count++ == SDMMC_MAX_VOLT_TRIAL) + { + return HAL_SD_ERROR_INVALID_VOLTRANGE; + } + + /* SEND CMD55 APP_CMD with RCA as 0 */ + errorstate = SDMMC_CmdAppCommand(hsd->Instance, 0U); + if(errorstate != HAL_SD_ERROR_NONE) + { + return errorstate; + } + + /* Send CMD41 */ + errorstate = SDMMC_CmdAppOperCommand(hsd->Instance, SDMMC_HIGH_CAPACITY); + if(errorstate != HAL_SD_ERROR_NONE) + { + return errorstate; + } + + /* Get command response */ + response = SDIO_GetResponse(hsd->Instance, SDIO_RESP1); + + /* Get operating voltage*/ + validvoltage = (((response >> 31U) == 1U) ? 1U : 0U); + } + + if((response & SDMMC_HIGH_CAPACITY) == SDMMC_HIGH_CAPACITY) /* (response &= SD_HIGH_CAPACITY) */ + { + hsd->SdCard.CardType = CARD_SDHC_SDXC; + } + else + { + hsd->SdCard.CardType = CARD_SDSC; + } + } + + return HAL_SD_ERROR_NONE; +} + +/** + * @brief Turns the SDIO output signals off. + * @param hsd Pointer to SD handle + * @retval HAL status + */ +static HAL_StatusTypeDef SD_PowerOFF(SD_HandleTypeDef *hsd) +{ + /* Set Power State to OFF */ + SDIO_PowerState_OFF(hsd->Instance); + + return HAL_OK; +} + +/** + * @brief Send Status info command. + * @param hsd pointer to SD handle + * @param pSDstatus Pointer to the buffer that will contain the SD card status + * SD Status register) + * @retval error state + */ +static uint32_t SD_SendSDStatus(SD_HandleTypeDef *hsd, uint32_t *pSDstatus) +{ + SDIO_DataInitTypeDef config; + uint32_t errorstate = HAL_SD_ERROR_NONE; + uint32_t tickstart = HAL_GetTick(); + uint32_t count = 0U; + + /* Check SD response */ + if((SDIO_GetResponse(hsd->Instance, SDIO_RESP1) & SDMMC_CARD_LOCKED) == SDMMC_CARD_LOCKED) + { + return HAL_SD_ERROR_LOCK_UNLOCK_FAILED; + } + + /* Set block size for card if it is not equal to current block size for card */ + errorstate = SDMMC_CmdBlockLength(hsd->Instance, 64U); + if(errorstate != HAL_SD_ERROR_NONE) + { + hsd->ErrorCode |= HAL_SD_ERROR_NONE; + return errorstate; + } + + /* Send CMD55 */ + errorstate = SDMMC_CmdAppCommand(hsd->Instance, (uint32_t)(hsd->SdCard.RelCardAdd << 16U)); + if(errorstate != HAL_SD_ERROR_NONE) + { + hsd->ErrorCode |= HAL_SD_ERROR_NONE; + return errorstate; + } + + /* Configure the SD DPSM (Data Path State Machine) */ + config.DataTimeOut = SDMMC_DATATIMEOUT; + config.DataLength = 64U; + config.DataBlockSize = SDIO_DATABLOCK_SIZE_64B; + config.TransferDir = SDIO_TRANSFER_DIR_TO_SDIO; + config.TransferMode = SDIO_TRANSFER_MODE_BLOCK; + config.DPSM = SDIO_DPSM_ENABLE; + SDIO_ConfigData(hsd->Instance, &config); + + /* Send ACMD13 (SD_APP_STAUS) with argument as card's RCA */ + errorstate = SDMMC_CmdStatusRegister(hsd->Instance); + if(errorstate != HAL_SD_ERROR_NONE) + { + hsd->ErrorCode |= HAL_SD_ERROR_NONE; + return errorstate; + } + + /* Get status data */ + while(!__HAL_SD_GET_FLAG(hsd, SDIO_FLAG_RXOVERR | SDIO_FLAG_DCRCFAIL | SDIO_FLAG_DTIMEOUT | SDIO_FLAG_DBCKEND)) + { + if(__HAL_SD_GET_FLAG(hsd, SDIO_FLAG_RXFIFOHF)) + { + for(count = 0U; count < 8U; count++) + { + *(pSDstatus + count) = SDIO_ReadFIFO(hsd->Instance); + } + + pSDstatus += 8U; + } + + if((HAL_GetTick() - tickstart) >= SDMMC_DATATIMEOUT) + { + return HAL_SD_ERROR_TIMEOUT; + } + } + + if(__HAL_SD_GET_FLAG(hsd, SDIO_FLAG_DTIMEOUT)) + { + return HAL_SD_ERROR_DATA_TIMEOUT; + } + else if(__HAL_SD_GET_FLAG(hsd, SDIO_FLAG_DCRCFAIL)) + { + return HAL_SD_ERROR_DATA_CRC_FAIL; + } + else if(__HAL_SD_GET_FLAG(hsd, SDIO_FLAG_RXOVERR)) + { + return HAL_SD_ERROR_RX_OVERRUN; + } + + while ((__HAL_SD_GET_FLAG(hsd, SDIO_FLAG_RXDAVL))) + { + *pSDstatus = SDIO_ReadFIFO(hsd->Instance); + pSDstatus++; + + if((HAL_GetTick() - tickstart) >= SDMMC_DATATIMEOUT) + { + return HAL_SD_ERROR_TIMEOUT; + } + } + + /* Clear all the static status flags*/ + __HAL_SD_CLEAR_FLAG(hsd, SDIO_STATIC_FLAGS); + + return HAL_SD_ERROR_NONE; +} + +/** + * @brief Returns the current card's status. + * @param hsd Pointer to SD handle + * @param pCardStatus pointer to the buffer that will contain the SD card + * status (Card Status register) + * @retval error state + */ +static uint32_t SD_SendStatus(SD_HandleTypeDef *hsd, uint32_t *pCardStatus) +{ + uint32_t errorstate = HAL_SD_ERROR_NONE; + + if(pCardStatus == NULL) + { + return HAL_SD_ERROR_PARAM; + } + + /* Send Status command */ + errorstate = SDMMC_CmdSendStatus(hsd->Instance, (uint32_t)(hsd->SdCard.RelCardAdd << 16U)); + if(errorstate != HAL_OK) + { + return errorstate; + } + + /* Get SD card status */ + *pCardStatus = SDIO_GetResponse(hsd->Instance, SDIO_RESP1); + + return HAL_SD_ERROR_NONE; +} + +/** + * @brief Enables the SDIO wide bus mode. + * @param hsd pointer to SD handle + * @retval error state + */ +static uint32_t SD_WideBus_Enable(SD_HandleTypeDef *hsd) +{ + uint32_t scr[2U] = {0U, 0U}; + uint32_t errorstate = HAL_SD_ERROR_NONE; + + if((SDIO_GetResponse(hsd->Instance, SDIO_RESP1) & SDMMC_CARD_LOCKED) == SDMMC_CARD_LOCKED) + { + return HAL_SD_ERROR_LOCK_UNLOCK_FAILED; + } + + /* Get SCR Register */ + errorstate = SD_FindSCR(hsd, scr); + if(errorstate != HAL_OK) + { + return errorstate; + } + + /* If requested card supports wide bus operation */ + if((scr[1U] & SDMMC_WIDE_BUS_SUPPORT) != SDMMC_ALLZERO) + { + /* Send CMD55 APP_CMD with argument as card's RCA.*/ + errorstate = SDMMC_CmdAppCommand(hsd->Instance, (uint32_t)(hsd->SdCard.RelCardAdd << 16U)); + if(errorstate != HAL_OK) + { + return errorstate; + } + + /* Send ACMD6 APP_CMD with argument as 2 for wide bus mode */ + errorstate = SDMMC_CmdBusWidth(hsd->Instance, 2U); + if(errorstate != HAL_OK) + { + return errorstate; + } + + return HAL_SD_ERROR_NONE; + } + else + { + return HAL_SD_ERROR_REQUEST_NOT_APPLICABLE; + } +} + +/** + * @brief Disables the SDIO wide bus mode. + * @param hsd Pointer to SD handle + * @retval error state + */ +static uint32_t SD_WideBus_Disable(SD_HandleTypeDef *hsd) +{ + uint32_t scr[2U] = {0U, 0U}; + uint32_t errorstate = HAL_SD_ERROR_NONE; + + if((SDIO_GetResponse(hsd->Instance, SDIO_RESP1) & SDMMC_CARD_LOCKED) == SDMMC_CARD_LOCKED) + { + return HAL_SD_ERROR_LOCK_UNLOCK_FAILED; + } + + /* Get SCR Register */ + errorstate = SD_FindSCR(hsd, scr); + if(errorstate != HAL_OK) + { + return errorstate; + } + + /* If requested card supports 1 bit mode operation */ + if((scr[1U] & SDMMC_SINGLE_BUS_SUPPORT) != SDMMC_ALLZERO) + { + /* Send CMD55 APP_CMD with argument as card's RCA */ + errorstate = SDMMC_CmdAppCommand(hsd->Instance, (uint32_t)(hsd->SdCard.RelCardAdd << 16U)); + if(errorstate != HAL_OK) + { + return errorstate; + } + + /* Send ACMD6 APP_CMD with argument as 0 for single bus mode */ + errorstate = SDMMC_CmdBusWidth(hsd->Instance, 0U); + if(errorstate != HAL_OK) + { + return errorstate; + } + + return HAL_SD_ERROR_NONE; + } + else + { + return HAL_SD_ERROR_REQUEST_NOT_APPLICABLE; + } +} + + +/** + * @brief Finds the SD card SCR register value. + * @param hsd Pointer to SD handle + * @param pSCR pointer to the buffer that will contain the SCR value + * @retval error state + */ +static uint32_t SD_FindSCR(SD_HandleTypeDef *hsd, uint32_t *pSCR) +{ + SDIO_DataInitTypeDef config; + uint32_t errorstate = HAL_SD_ERROR_NONE; + uint32_t tickstart = HAL_GetTick(); + uint32_t index = 0U; + uint32_t tempscr[2U] = {0U, 0U}; + + /* Set Block Size To 8 Bytes */ + errorstate = SDMMC_CmdBlockLength(hsd->Instance, 8U); + if(errorstate != HAL_OK) + { + return errorstate; + } + + /* Send CMD55 APP_CMD with argument as card's RCA */ + errorstate = SDMMC_CmdAppCommand(hsd->Instance, (uint32_t)((hsd->SdCard.RelCardAdd) << 16U)); + if(errorstate != HAL_OK) + { + return errorstate; + } + + config.DataTimeOut = SDMMC_DATATIMEOUT; + config.DataLength = 8U; + config.DataBlockSize = SDIO_DATABLOCK_SIZE_8B; + config.TransferDir = SDIO_TRANSFER_DIR_TO_SDIO; + config.TransferMode = SDIO_TRANSFER_MODE_BLOCK; + config.DPSM = SDIO_DPSM_ENABLE; + SDIO_ConfigData(hsd->Instance, &config); + + /* Send ACMD51 SD_APP_SEND_SCR with argument as 0 */ + errorstate = SDMMC_CmdSendSCR(hsd->Instance); + if(errorstate != HAL_OK) + { + return errorstate; + } + + while(!__HAL_SD_GET_FLAG(hsd, SDIO_FLAG_RXOVERR | SDIO_FLAG_DCRCFAIL | SDIO_FLAG_DTIMEOUT | SDIO_FLAG_DBCKEND)) + { + if(__HAL_SD_GET_FLAG(hsd, SDIO_FLAG_RXDAVL)) + { + *(tempscr + index) = SDIO_ReadFIFO(hsd->Instance); + index++; + } + + if((HAL_GetTick() - tickstart) >= SDMMC_DATATIMEOUT) + { + return HAL_SD_ERROR_TIMEOUT; + } + } + + if(__HAL_SD_GET_FLAG(hsd, SDIO_FLAG_DTIMEOUT)) + { + __HAL_SD_CLEAR_FLAG(hsd, SDIO_FLAG_DTIMEOUT); + + return HAL_SD_ERROR_DATA_TIMEOUT; + } + else if(__HAL_SD_GET_FLAG(hsd, SDIO_FLAG_DCRCFAIL)) + { + __HAL_SD_CLEAR_FLAG(hsd, SDIO_FLAG_DCRCFAIL); + + return HAL_SD_ERROR_DATA_CRC_FAIL; + } + else if(__HAL_SD_GET_FLAG(hsd, SDIO_FLAG_RXOVERR)) + { + __HAL_SD_CLEAR_FLAG(hsd, SDIO_FLAG_RXOVERR); + + return HAL_SD_ERROR_RX_OVERRUN; + } + else + { + /* No error flag set */ + /* Clear all the static flags */ + __HAL_SD_CLEAR_FLAG(hsd, SDIO_STATIC_FLAGS); + + *(pSCR + 1U) = ((tempscr[0U] & SDMMC_0TO7BITS) << 24U) | ((tempscr[0U] & SDMMC_8TO15BITS) << 8U) |\ + ((tempscr[0U] & SDMMC_16TO23BITS) >> 8U) | ((tempscr[0U] & SDMMC_24TO31BITS) >> 24U); + + *(pSCR) = ((tempscr[1U] & SDMMC_0TO7BITS) << 24U) | ((tempscr[1U] & SDMMC_8TO15BITS) << 8U) |\ + ((tempscr[1U] & SDMMC_16TO23BITS) >> 8U) | ((tempscr[1U] & SDMMC_24TO31BITS) >> 24U); + } + + return HAL_SD_ERROR_NONE; +} + +/** + * @brief Wrap up reading in non-blocking mode. + * @param hsd pointer to a SD_HandleTypeDef structure that contains + * the configuration information. + * @retval HAL status + */ +static HAL_StatusTypeDef SD_Read_IT(SD_HandleTypeDef *hsd) +{ + uint32_t count = 0U; + uint32_t* tmp; + + tmp = (uint32_t*)hsd->pRxBuffPtr; + + /* Read data from SDIO Rx FIFO */ + for(count = 0U; count < 8U; count++) + { + *(tmp + count) = SDIO_ReadFIFO(hsd->Instance); + } + + hsd->pRxBuffPtr += 8U; + + return HAL_OK; +} + +/** + * @brief Wrap up writing in non-blocking mode. + * @param hsd pointer to a SD_HandleTypeDef structure that contains + * the configuration information. + * @retval HAL status + */ +static HAL_StatusTypeDef SD_Write_IT(SD_HandleTypeDef *hsd) +{ + uint32_t count = 0U; + uint32_t* tmp; + + tmp = (uint32_t*)hsd->pTxBuffPtr; + + /* Write data to SDIO Tx FIFO */ + for(count = 0U; count < 8U; count++) + { + SDIO_WriteFIFO(hsd->Instance, (tmp + count)); + } + + hsd->pTxBuffPtr += 8U; + + return HAL_OK; +} + +/** + * @} + */ + +#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || + STM32F401xC || STM32F401xE || STM32F411xE || STM32F446xx || STM32F469xx || STM32F479xx || STM32F412Zx || STM32F412Vx || + STM32F412Rx || STM32F412Cx || STM32F413xx || STM32F423xx */ + +#endif /* HAL_SD_MODULE_ENABLED */ + +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_sram.c b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_sram.c new file mode 100644 index 0000000..7a48a8e --- /dev/null +++ b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_sram.c @@ -0,0 +1,912 @@ +/** + ****************************************************************************** + * @file stm32f4xx_hal_sram.c + * @author MCD Application Team + * @brief SRAM HAL module driver. + * This file provides a generic firmware to drive SRAM memories + * mounted as external device. + * + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] + This driver is a generic layered driver which contains a set of APIs used to + control SRAM memories. It uses the FMC layer functions to interface + with SRAM devices. + The following sequence should be followed to configure the FMC/FSMC to interface + with SRAM/PSRAM memories: + + (#) Declare a SRAM_HandleTypeDef handle structure, for example: + SRAM_HandleTypeDef hsram; and: + + (++) Fill the SRAM_HandleTypeDef handle "Init" field with the allowed + values of the structure member. + + (++) Fill the SRAM_HandleTypeDef handle "Instance" field with a predefined + base register instance for NOR or SRAM device + + (++) Fill the SRAM_HandleTypeDef handle "Extended" field with a predefined + base register instance for NOR or SRAM extended mode + + (#) Declare two FMC_NORSRAM_TimingTypeDef structures, for both normal and extended + mode timings; for example: + FMC_NORSRAM_TimingTypeDef Timing and FMC_NORSRAM_TimingTypeDef ExTiming; + and fill its fields with the allowed values of the structure member. + + (#) Initialize the SRAM Controller by calling the function HAL_SRAM_Init(). This function + performs the following sequence: + + (##) MSP hardware layer configuration using the function HAL_SRAM_MspInit() + (##) Control register configuration using the FMC NORSRAM interface function + FMC_NORSRAM_Init() + (##) Timing register configuration using the FMC NORSRAM interface function + FMC_NORSRAM_Timing_Init() + (##) Extended mode Timing register configuration using the FMC NORSRAM interface function + FMC_NORSRAM_Extended_Timing_Init() + (##) Enable the SRAM device using the macro __FMC_NORSRAM_ENABLE() + + (#) At this stage you can perform read/write accesses from/to the memory connected + to the NOR/SRAM Bank. You can perform either polling or DMA transfer using the + following APIs: + (++) HAL_SRAM_Read()/HAL_SRAM_Write() for polling read/write access + (++) HAL_SRAM_Read_DMA()/HAL_SRAM_Write_DMA() for DMA read/write transfer + + (#) You can also control the SRAM device by calling the control APIs HAL_SRAM_WriteOperation_Enable()/ + HAL_SRAM_WriteOperation_Disable() to respectively enable/disable the SRAM write operation + + (#) You can continuously monitor the SRAM device HAL state by calling the function + HAL_SRAM_GetState() + + *** Callback registration *** + ============================================= + [..] + The compilation define USE_HAL_SRAM_REGISTER_CALLBACKS when set to 1 + allows the user to configure dynamically the driver callbacks. + + Use Functions @ref HAL_SRAM_RegisterCallback() to register a user callback, + it allows to register following callbacks: + (+) MspInitCallback : SRAM MspInit. + (+) MspDeInitCallback : SRAM MspDeInit. + This function takes as parameters the HAL peripheral handle, the Callback ID + and a pointer to the user callback function. + + Use function @ref HAL_SRAM_UnRegisterCallback() to reset a callback to the default + weak (surcharged) function. It allows to reset following callbacks: + (+) MspInitCallback : SRAM MspInit. + (+) MspDeInitCallback : SRAM MspDeInit. + This function) takes as parameters the HAL peripheral handle and the Callback ID. + + By default, after the @ref HAL_SRAM_Init and if the state is HAL_SRAM_STATE_RESET + all callbacks are reset to the corresponding legacy weak (surcharged) functions. + Exception done for MspInit and MspDeInit callbacks that are respectively + reset to the legacy weak (surcharged) functions in the @ref HAL_SRAM_Init + and @ref HAL_SRAM_DeInit only when these callbacks are null (not registered beforehand). + If not, MspInit or MspDeInit are not null, the @ref HAL_SRAM_Init and @ref HAL_SRAM_DeInit + keep and use the user MspInit/MspDeInit callbacks (registered beforehand) + + Callbacks can be registered/unregistered in READY state only. + Exception done for MspInit/MspDeInit callbacks that can be registered/unregistered + in READY or RESET state, thus registered (user) MspInit/DeInit callbacks can be used + during the Init/DeInit. + In that case first register the MspInit/MspDeInit user callbacks + using @ref HAL_SRAM_RegisterCallback before calling @ref HAL_SRAM_DeInit + or @ref HAL_SRAM_Init function. + + When The compilation define USE_HAL_SRAM_REGISTER_CALLBACKS is set to 0 or + not defined, the callback registering feature is not available + and weak (surcharged) callbacks are used. + + @endverbatim + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2017 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f4xx_hal.h" + +/** @addtogroup STM32F4xx_HAL_Driver + * @{ + */ + +/** @defgroup SRAM SRAM + * @brief SRAM driver modules + * @{ + */ +#ifdef HAL_SRAM_MODULE_ENABLED + +#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) ||\ + defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\ + defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) ||\ + defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F413xx) || defined(STM32F423xx) + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private functions ---------------------------------------------------------*/ + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup SRAM_Exported_Functions SRAM Exported Functions + * @{ + */ +/** @defgroup SRAM_Exported_Functions_Group1 Initialization and de-initialization functions + * @brief Initialization and Configuration functions + * + @verbatim + ============================================================================== + ##### SRAM Initialization and de_initialization functions ##### + ============================================================================== + [..] This section provides functions allowing to initialize/de-initialize + the SRAM memory + +@endverbatim + * @{ + */ + +/** + * @brief Performs the SRAM device initialization sequence + * @param hsram pointer to a SRAM_HandleTypeDef structure that contains + * the configuration information for SRAM module. + * @param Timing Pointer to SRAM control timing structure + * @param ExtTiming Pointer to SRAM extended mode timing structure + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SRAM_Init(SRAM_HandleTypeDef *hsram, FMC_NORSRAM_TimingTypeDef *Timing, FMC_NORSRAM_TimingTypeDef *ExtTiming) +{ + /* Check the SRAM handle parameter */ + if(hsram == NULL) + { + return HAL_ERROR; + } + + if(hsram->State == HAL_SRAM_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + hsram->Lock = HAL_UNLOCKED; + +#if (USE_HAL_SRAM_REGISTER_CALLBACKS == 1) + if(hsram->MspInitCallback == NULL) + { + hsram->MspInitCallback = HAL_SRAM_MspInit; + } + hsram->DmaXferCpltCallback = HAL_SRAM_DMA_XferCpltCallback; + hsram->DmaXferErrorCallback = HAL_SRAM_DMA_XferErrorCallback; + + /* Init the low level hardware */ + hsram->MspInitCallback(hsram); +#else + /* Initialize the low level hardware (MSP) */ + HAL_SRAM_MspInit(hsram); +#endif + } + + /* Initialize SRAM control Interface */ + FMC_NORSRAM_Init(hsram->Instance, &(hsram->Init)); + + /* Initialize SRAM timing Interface */ + FMC_NORSRAM_Timing_Init(hsram->Instance, Timing, hsram->Init.NSBank); + + /* Initialize SRAM extended mode timing Interface */ + FMC_NORSRAM_Extended_Timing_Init(hsram->Extended, ExtTiming, hsram->Init.NSBank, hsram->Init.ExtendedMode); + + /* Enable the NORSRAM device */ + __FMC_NORSRAM_ENABLE(hsram->Instance, hsram->Init.NSBank); + + return HAL_OK; +} + +/** + * @brief Performs the SRAM device De-initialization sequence. + * @param hsram pointer to a SRAM_HandleTypeDef structure that contains + * the configuration information for SRAM module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SRAM_DeInit(SRAM_HandleTypeDef *hsram) +{ +#if (USE_HAL_SRAM_REGISTER_CALLBACKS == 1) + if(hsram->MspDeInitCallback == NULL) + { + hsram->MspDeInitCallback = HAL_SRAM_MspDeInit; + } + + /* DeInit the low level hardware */ + hsram->MspDeInitCallback(hsram); +#else + /* De-Initialize the low level hardware (MSP) */ + HAL_SRAM_MspDeInit(hsram); +#endif + + /* Configure the SRAM registers with their reset values */ + FMC_NORSRAM_DeInit(hsram->Instance, hsram->Extended, hsram->Init.NSBank); + + hsram->State = HAL_SRAM_STATE_RESET; + + /* Release Lock */ + __HAL_UNLOCK(hsram); + + return HAL_OK; +} + +/** + * @brief SRAM MSP Init. + * @param hsram pointer to a SRAM_HandleTypeDef structure that contains + * the configuration information for SRAM module. + * @retval None + */ +__weak void HAL_SRAM_MspInit(SRAM_HandleTypeDef *hsram) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hsram); + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_SRAM_MspInit could be implemented in the user file + */ +} + +/** + * @brief SRAM MSP DeInit. + * @param hsram pointer to a SRAM_HandleTypeDef structure that contains + * the configuration information for SRAM module. + * @retval None + */ +__weak void HAL_SRAM_MspDeInit(SRAM_HandleTypeDef *hsram) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hsram); + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_SRAM_MspDeInit could be implemented in the user file + */ +} + +/** + * @brief DMA transfer complete callback. + * @param hdma pointer to a SRAM_HandleTypeDef structure that contains + * the configuration information for SRAM module. + * @retval None + */ +__weak void HAL_SRAM_DMA_XferCpltCallback(DMA_HandleTypeDef *hdma) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hdma); + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_SRAM_DMA_XferCpltCallback could be implemented in the user file + */ +} + +/** + * @brief DMA transfer complete error callback. + * @param hdma pointer to a SRAM_HandleTypeDef structure that contains + * the configuration information for SRAM module. + * @retval None + */ +__weak void HAL_SRAM_DMA_XferErrorCallback(DMA_HandleTypeDef *hdma) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hdma); + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_SRAM_DMA_XferErrorCallback could be implemented in the user file + */ +} + +/** + * @} + */ + +/** @defgroup SRAM_Exported_Functions_Group2 Input and Output functions + * @brief Input Output and memory control functions + * + @verbatim + ============================================================================== + ##### SRAM Input and Output functions ##### + ============================================================================== + [..] + This section provides functions allowing to use and control the SRAM memory + +@endverbatim + * @{ + */ + +/** + * @brief Reads 8-bit buffer from SRAM memory. + * @param hsram pointer to a SRAM_HandleTypeDef structure that contains + * the configuration information for SRAM module. + * @param pAddress Pointer to read start address + * @param pDstBuffer Pointer to destination buffer + * @param BufferSize Size of the buffer to read from memory + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SRAM_Read_8b(SRAM_HandleTypeDef *hsram, uint32_t *pAddress, uint8_t *pDstBuffer, uint32_t BufferSize) +{ + __IO uint8_t * pSramAddress = (uint8_t *)pAddress; + + /* Process Locked */ + __HAL_LOCK(hsram); + + /* Update the SRAM controller state */ + hsram->State = HAL_SRAM_STATE_BUSY; + + /* Read data from memory */ + for(; BufferSize != 0U; BufferSize--) + { + *pDstBuffer = *(__IO uint8_t *)pSramAddress; + pDstBuffer++; + pSramAddress++; + } + + /* Update the SRAM controller state */ + hsram->State = HAL_SRAM_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hsram); + + return HAL_OK; +} + +/** + * @brief Writes 8-bit buffer to SRAM memory. + * @param hsram pointer to a SRAM_HandleTypeDef structure that contains + * the configuration information for SRAM module. + * @param pAddress Pointer to write start address + * @param pSrcBuffer Pointer to source buffer to write + * @param BufferSize Size of the buffer to write to memory + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SRAM_Write_8b(SRAM_HandleTypeDef *hsram, uint32_t *pAddress, uint8_t *pSrcBuffer, uint32_t BufferSize) +{ + __IO uint8_t * pSramAddress = (uint8_t *)pAddress; + + /* Check the SRAM controller state */ + if(hsram->State == HAL_SRAM_STATE_PROTECTED) + { + return HAL_ERROR; + } + + /* Process Locked */ + __HAL_LOCK(hsram); + + /* Update the SRAM controller state */ + hsram->State = HAL_SRAM_STATE_BUSY; + + /* Write data to memory */ + for(; BufferSize != 0U; BufferSize--) + { + *(__IO uint8_t *)pSramAddress = *pSrcBuffer; + pSrcBuffer++; + pSramAddress++; + } + + /* Update the SRAM controller state */ + hsram->State = HAL_SRAM_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hsram); + + return HAL_OK; +} + +/** + * @brief Reads 16-bit buffer from SRAM memory. + * @param hsram pointer to a SRAM_HandleTypeDef structure that contains + * the configuration information for SRAM module. + * @param pAddress Pointer to read start address + * @param pDstBuffer Pointer to destination buffer + * @param BufferSize Size of the buffer to read from memory + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SRAM_Read_16b(SRAM_HandleTypeDef *hsram, uint32_t *pAddress, uint16_t *pDstBuffer, uint32_t BufferSize) +{ + __IO uint16_t * pSramAddress = (uint16_t *)pAddress; + + /* Process Locked */ + __HAL_LOCK(hsram); + + /* Update the SRAM controller state */ + hsram->State = HAL_SRAM_STATE_BUSY; + + /* Read data from memory */ + for(; BufferSize != 0U; BufferSize--) + { + *pDstBuffer = *(__IO uint16_t *)pSramAddress; + pDstBuffer++; + pSramAddress++; + } + + /* Update the SRAM controller state */ + hsram->State = HAL_SRAM_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hsram); + + return HAL_OK; +} + +/** + * @brief Writes 16-bit buffer to SRAM memory. + * @param hsram pointer to a SRAM_HandleTypeDef structure that contains + * the configuration information for SRAM module. + * @param pAddress Pointer to write start address + * @param pSrcBuffer Pointer to source buffer to write + * @param BufferSize Size of the buffer to write to memory + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SRAM_Write_16b(SRAM_HandleTypeDef *hsram, uint32_t *pAddress, uint16_t *pSrcBuffer, uint32_t BufferSize) +{ + __IO uint16_t * pSramAddress = (uint16_t *)pAddress; + + /* Check the SRAM controller state */ + if(hsram->State == HAL_SRAM_STATE_PROTECTED) + { + return HAL_ERROR; + } + + /* Process Locked */ + __HAL_LOCK(hsram); + + /* Update the SRAM controller state */ + hsram->State = HAL_SRAM_STATE_BUSY; + + /* Write data to memory */ + for(; BufferSize != 0U; BufferSize--) + { + *(__IO uint16_t *)pSramAddress = *pSrcBuffer; + pSrcBuffer++; + pSramAddress++; + } + + /* Update the SRAM controller state */ + hsram->State = HAL_SRAM_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hsram); + + return HAL_OK; +} + +/** + * @brief Reads 32-bit buffer from SRAM memory. + * @param hsram pointer to a SRAM_HandleTypeDef structure that contains + * the configuration information for SRAM module. + * @param pAddress Pointer to read start address + * @param pDstBuffer Pointer to destination buffer + * @param BufferSize Size of the buffer to read from memory + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SRAM_Read_32b(SRAM_HandleTypeDef *hsram, uint32_t *pAddress, uint32_t *pDstBuffer, uint32_t BufferSize) +{ + /* Process Locked */ + __HAL_LOCK(hsram); + + /* Update the SRAM controller state */ + hsram->State = HAL_SRAM_STATE_BUSY; + + /* Read data from memory */ + for(; BufferSize != 0U; BufferSize--) + { + *pDstBuffer = *(__IO uint32_t *)pAddress; + pDstBuffer++; + pAddress++; + } + + /* Update the SRAM controller state */ + hsram->State = HAL_SRAM_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hsram); + + return HAL_OK; +} + +/** + * @brief Writes 32-bit buffer to SRAM memory. + * @param hsram pointer to a SRAM_HandleTypeDef structure that contains + * the configuration information for SRAM module. + * @param pAddress Pointer to write start address + * @param pSrcBuffer Pointer to source buffer to write + * @param BufferSize Size of the buffer to write to memory + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SRAM_Write_32b(SRAM_HandleTypeDef *hsram, uint32_t *pAddress, uint32_t *pSrcBuffer, uint32_t BufferSize) +{ + /* Check the SRAM controller state */ + if(hsram->State == HAL_SRAM_STATE_PROTECTED) + { + return HAL_ERROR; + } + + /* Process Locked */ + __HAL_LOCK(hsram); + + /* Update the SRAM controller state */ + hsram->State = HAL_SRAM_STATE_BUSY; + + /* Write data to memory */ + for(; BufferSize != 0U; BufferSize--) + { + *(__IO uint32_t *)pAddress = *pSrcBuffer; + pSrcBuffer++; + pAddress++; + } + + /* Update the SRAM controller state */ + hsram->State = HAL_SRAM_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hsram); + + return HAL_OK; +} + +/** + * @brief Reads a Words data from the SRAM memory using DMA transfer. + * @param hsram pointer to a SRAM_HandleTypeDef structure that contains + * the configuration information for SRAM module. + * @param pAddress Pointer to read start address + * @param pDstBuffer Pointer to destination buffer + * @param BufferSize Size of the buffer to read from memory + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SRAM_Read_DMA(SRAM_HandleTypeDef *hsram, uint32_t *pAddress, uint32_t *pDstBuffer, uint32_t BufferSize) +{ + /* Process Locked */ + __HAL_LOCK(hsram); + + /* Update the SRAM controller state */ + hsram->State = HAL_SRAM_STATE_BUSY; + + /* Configure DMA user callbacks */ + hsram->hdma->XferCpltCallback = HAL_SRAM_DMA_XferCpltCallback; + hsram->hdma->XferErrorCallback = HAL_SRAM_DMA_XferErrorCallback; + + /* Enable the DMA Stream */ + HAL_DMA_Start_IT(hsram->hdma, (uint32_t)pAddress, (uint32_t)pDstBuffer, (uint32_t)BufferSize); + + /* Update the SRAM controller state */ + hsram->State = HAL_SRAM_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hsram); + + return HAL_OK; +} + +/** + * @brief Writes a Words data buffer to SRAM memory using DMA transfer. + * @param hsram pointer to a SRAM_HandleTypeDef structure that contains + * the configuration information for SRAM module. + * @param pAddress Pointer to write start address + * @param pSrcBuffer Pointer to source buffer to write + * @param BufferSize Size of the buffer to write to memory + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SRAM_Write_DMA(SRAM_HandleTypeDef *hsram, uint32_t *pAddress, uint32_t *pSrcBuffer, uint32_t BufferSize) +{ + /* Check the SRAM controller state */ + if(hsram->State == HAL_SRAM_STATE_PROTECTED) + { + return HAL_ERROR; + } + + /* Process Locked */ + __HAL_LOCK(hsram); + + /* Update the SRAM controller state */ + hsram->State = HAL_SRAM_STATE_BUSY; + + /* Configure DMA user callbacks */ + hsram->hdma->XferCpltCallback = HAL_SRAM_DMA_XferCpltCallback; + hsram->hdma->XferErrorCallback = HAL_SRAM_DMA_XferErrorCallback; + + /* Enable the DMA Stream */ + HAL_DMA_Start_IT(hsram->hdma, (uint32_t)pSrcBuffer, (uint32_t)pAddress, (uint32_t)BufferSize); + + /* Update the SRAM controller state */ + hsram->State = HAL_SRAM_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hsram); + + return HAL_OK; +} + +#if (USE_HAL_SRAM_REGISTER_CALLBACKS == 1) +/** + * @brief Register a User SRAM Callback + * To be used instead of the weak (surcharged) predefined callback + * @param hsram : SRAM handle + * @param CallbackId : ID of the callback to be registered + * This parameter can be one of the following values: + * @arg @ref HAL_SRAM_MSP_INIT_CB_ID SRAM MspInit callback ID + * @arg @ref HAL_SRAM_MSP_DEINIT_CB_ID SRAM MspDeInit callback ID + * @param pCallback : pointer to the Callback function + * @retval status + */ +HAL_StatusTypeDef HAL_SRAM_RegisterCallback (SRAM_HandleTypeDef *hsram, HAL_SRAM_CallbackIDTypeDef CallbackId, pSRAM_CallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + HAL_SRAM_StateTypeDef state; + + if(pCallback == NULL) + { + return HAL_ERROR; + } + + /* Process locked */ + __HAL_LOCK(hsram); + + state = hsram->State; + if((state == HAL_SRAM_STATE_READY) || (state == HAL_SRAM_STATE_RESET) || (state == HAL_SRAM_STATE_PROTECTED)) + { + switch (CallbackId) + { + case HAL_SRAM_MSP_INIT_CB_ID : + hsram->MspInitCallback = pCallback; + break; + case HAL_SRAM_MSP_DEINIT_CB_ID : + hsram->MspDeInitCallback = pCallback; + break; + default : + /* update return status */ + status = HAL_ERROR; + break; + } + } + else + { + /* update return status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hsram); + return status; +} + +/** + * @brief Unregister a User SRAM Callback + * SRAM Callback is redirected to the weak (surcharged) predefined callback + * @param hsram : SRAM handle + * @param CallbackId : ID of the callback to be unregistered + * This parameter can be one of the following values: + * @arg @ref HAL_SRAM_MSP_INIT_CB_ID SRAM MspInit callback ID + * @arg @ref HAL_SRAM_MSP_DEINIT_CB_ID SRAM MspDeInit callback ID + * @arg @ref HAL_SRAM_DMA_XFER_CPLT_CB_ID SRAM DMA Xfer Complete callback ID + * @arg @ref HAL_SRAM_DMA_XFER_ERR_CB_ID SRAM DMA Xfer Error callback ID + * @retval status + */ +HAL_StatusTypeDef HAL_SRAM_UnRegisterCallback (SRAM_HandleTypeDef *hsram, HAL_SRAM_CallbackIDTypeDef CallbackId) +{ + HAL_StatusTypeDef status = HAL_OK; + HAL_SRAM_StateTypeDef state; + + /* Process locked */ + __HAL_LOCK(hsram); + + state = hsram->State; + if((state == HAL_SRAM_STATE_READY) || (state == HAL_SRAM_STATE_PROTECTED)) + { + switch (CallbackId) + { + case HAL_SRAM_MSP_INIT_CB_ID : + hsram->MspInitCallback = HAL_SRAM_MspInit; + break; + case HAL_SRAM_MSP_DEINIT_CB_ID : + hsram->MspDeInitCallback = HAL_SRAM_MspDeInit; + break; + case HAL_SRAM_DMA_XFER_CPLT_CB_ID : + hsram->DmaXferCpltCallback = HAL_SRAM_DMA_XferCpltCallback; + break; + case HAL_SRAM_DMA_XFER_ERR_CB_ID : + hsram->DmaXferErrorCallback = HAL_SRAM_DMA_XferErrorCallback; + break; + default : + /* update return status */ + status = HAL_ERROR; + break; + } + } + else if(state == HAL_SRAM_STATE_RESET) + { + switch (CallbackId) + { + case HAL_SRAM_MSP_INIT_CB_ID : + hsram->MspInitCallback = HAL_SRAM_MspInit; + break; + case HAL_SRAM_MSP_DEINIT_CB_ID : + hsram->MspDeInitCallback = HAL_SRAM_MspDeInit; + break; + default : + /* update return status */ + status = HAL_ERROR; + break; + } + } + else + { + /* update return status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hsram); + return status; +} + +/** + * @brief Register a User SRAM Callback for DMA transfers + * To be used instead of the weak (surcharged) predefined callback + * @param hsram : SRAM handle + * @param CallbackId : ID of the callback to be registered + * This parameter can be one of the following values: + * @arg @ref HAL_SRAM_DMA_XFER_CPLT_CB_ID SRAM DMA Xfer Complete callback ID + * @arg @ref HAL_SRAM_DMA_XFER_ERR_CB_ID SRAM DMA Xfer Error callback ID + * @param pCallback : pointer to the Callback function + * @retval status + */ +HAL_StatusTypeDef HAL_SRAM_RegisterDmaCallback(SRAM_HandleTypeDef *hsram, HAL_SRAM_CallbackIDTypeDef CallbackId, pSRAM_DmaCallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + HAL_SRAM_StateTypeDef state; + + if(pCallback == NULL) + { + return HAL_ERROR; + } + + /* Process locked */ + __HAL_LOCK(hsram); + + state = hsram->State; + if((state == HAL_SRAM_STATE_READY) || (state == HAL_SRAM_STATE_PROTECTED)) + { + switch (CallbackId) + { + case HAL_SRAM_DMA_XFER_CPLT_CB_ID : + hsram->DmaXferCpltCallback = pCallback; + break; + case HAL_SRAM_DMA_XFER_ERR_CB_ID : + hsram->DmaXferErrorCallback = pCallback; + break; + default : + /* update return status */ + status = HAL_ERROR; + break; + } + } + else + { + /* update return status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hsram); + return status; +} +#endif +/** + * @} + */ + +/** @defgroup SRAM_Exported_Functions_Group3 Control functions + * @brief management functions + * +@verbatim + ============================================================================== + ##### SRAM Control functions ##### + ============================================================================== + [..] + This subsection provides a set of functions allowing to control dynamically + the SRAM interface. + +@endverbatim + * @{ + */ + +/** + * @brief Enables dynamically SRAM write operation. + * @param hsram pointer to a SRAM_HandleTypeDef structure that contains + * the configuration information for SRAM module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SRAM_WriteOperation_Enable(SRAM_HandleTypeDef *hsram) +{ + /* Process Locked */ + __HAL_LOCK(hsram); + + /* Enable write operation */ + FMC_NORSRAM_WriteOperation_Enable(hsram->Instance, hsram->Init.NSBank); + + /* Update the SRAM controller state */ + hsram->State = HAL_SRAM_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hsram); + + return HAL_OK; +} + +/** + * @brief Disables dynamically SRAM write operation. + * @param hsram pointer to a SRAM_HandleTypeDef structure that contains + * the configuration information for SRAM module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SRAM_WriteOperation_Disable(SRAM_HandleTypeDef *hsram) +{ + /* Process Locked */ + __HAL_LOCK(hsram); + + /* Update the SRAM controller state */ + hsram->State = HAL_SRAM_STATE_BUSY; + + /* Disable write operation */ + FMC_NORSRAM_WriteOperation_Disable(hsram->Instance, hsram->Init.NSBank); + + /* Update the SRAM controller state */ + hsram->State = HAL_SRAM_STATE_PROTECTED; + + /* Process unlocked */ + __HAL_UNLOCK(hsram); + + return HAL_OK; +} + +/** + * @} + */ + +/** @defgroup SRAM_Exported_Functions_Group4 State functions + * @brief Peripheral State functions + * +@verbatim + ============================================================================== + ##### SRAM State functions ##### + ============================================================================== + [..] + This subsection permits to get in run-time the status of the SRAM controller + and the data flow. + +@endverbatim + * @{ + */ + +/** + * @brief Returns the SRAM controller state + * @param hsram pointer to a SRAM_HandleTypeDef structure that contains + * the configuration information for SRAM module. + * @retval HAL state + */ +HAL_SRAM_StateTypeDef HAL_SRAM_GetState(SRAM_HandleTypeDef *hsram) +{ + return hsram->State; +} +/** + * @} + */ + +/** + * @} + */ +#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F427xx || STM32F437xx ||\ + STM32F429xx || STM32F439xx || STM32F446xx || STM32F469xx || STM32F479xx || STM32F412Zx ||\ + STM32F412Vx || STM32F412Rx || STM32F412Cx || STM32F413xx || STM32F423xx */ +#endif /* HAL_SRAM_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_fsmc.c b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_fsmc.c new file mode 100644 index 0000000..3de817c --- /dev/null +++ b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_fsmc.c @@ -0,0 +1,1009 @@ +/** + ****************************************************************************** + * @file stm32f4xx_ll_fsmc.c + * @author MCD Application Team + * @brief FSMC Low Layer HAL module driver. + * + * This file provides firmware functions to manage the following + * functionalities of the Flexible Static Memory Controller (FSMC) peripheral memories: + * + Initialization/de-initialization functions + * + Peripheral Control functions + * + Peripheral State functions + * + @verbatim + ============================================================================== + ##### FSMC peripheral features ##### + ============================================================================== + [..] The Flexible static memory controller (FSMC) includes two memory controllers: + (+) The NOR/PSRAM memory controller + (+) The NAND/PC Card memory controller + + [..] The FSMC functional block makes the interface with synchronous and asynchronous static + memories, SDRAM memories, and 16-bit PC memory cards. Its main purposes are: + (+) to translate AHB transactions into the appropriate external device protocol. + (+) to meet the access time requirements of the external memory devices. + + [..] All external memories share the addresses, data and control signals with the controller. + Each external device is accessed by means of a unique Chip Select. The FSMC performs + only one access at a time to an external device. + The main features of the FSMC controller are the following: + (+) Interface with static-memory mapped devices including: + (++) Static random access memory (SRAM). + (++) Read-only memory (ROM). + (++) NOR Flash memory/OneNAND Flash memory. + (++) PSRAM (4 memory banks). + (++) 16-bit PC Card compatible devices. + (++) Two banks of NAND Flash memory with ECC hardware to check up to 8 Kbytes of + data. + (+) Independent Chip Select control for each memory bank. + (+) Independent configuration for each memory bank. + + @endverbatim + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2017 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f4xx_hal.h" + +/** @addtogroup STM32F4xx_HAL_Driver + * @{ + */ + +/** @defgroup FSMC_LL FSMC Low Layer + * @brief FSMC driver modules + * @{ + */ + +#if defined (HAL_SRAM_MODULE_ENABLED) || defined(HAL_NOR_MODULE_ENABLED) || defined(HAL_NAND_MODULE_ENABLED) || defined(HAL_PCCARD_MODULE_ENABLED) +#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) || defined(STM32F412Zx) ||\ + defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F413xx) || defined(STM32F423xx) +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Private functions ---------------------------------------------------------*/ +/** @addtogroup FSMC_LL_Private_Functions + * @{ + */ + +/** @addtogroup FSMC_LL_NORSRAM + * @brief NORSRAM Controller functions + * + @verbatim + ============================================================================== + ##### How to use NORSRAM device driver ##### + ============================================================================== + + [..] + This driver contains a set of APIs to interface with the FSMC NORSRAM banks in order + to run the NORSRAM external devices. + + (+) FSMC NORSRAM bank reset using the function FSMC_NORSRAM_DeInit() + (+) FSMC NORSRAM bank control configuration using the function FSMC_NORSRAM_Init() + (+) FSMC NORSRAM bank timing configuration using the function FSMC_NORSRAM_Timing_Init() + (+) FSMC NORSRAM bank extended timing configuration using the function + FSMC_NORSRAM_Extended_Timing_Init() + (+) FSMC NORSRAM bank enable/disable write operation using the functions + FSMC_NORSRAM_WriteOperation_Enable()/FSMC_NORSRAM_WriteOperation_Disable() + +@endverbatim + * @{ + */ + +/** @addtogroup FSMC_LL_NORSRAM_Private_Functions_Group1 + * @brief Initialization and Configuration functions + * + @verbatim + ============================================================================== + ##### Initialization and de_initialization functions ##### + ============================================================================== + [..] + This section provides functions allowing to: + (+) Initialize and configure the FSMC NORSRAM interface + (+) De-initialize the FSMC NORSRAM interface + (+) Configure the FSMC clock and associated GPIOs + +@endverbatim + * @{ + */ + +/** + * @brief Initialize the FSMC_NORSRAM device according to the specified + * control parameters in the FSMC_NORSRAM_InitTypeDef + * @param Device Pointer to NORSRAM device instance + * @param Init Pointer to NORSRAM Initialization structure + * @retval HAL status + */ +HAL_StatusTypeDef FSMC_NORSRAM_Init(FSMC_NORSRAM_TypeDef *Device, FSMC_NORSRAM_InitTypeDef* Init) +{ + uint32_t tmpr = 0U; + + /* Check the parameters */ + assert_param(IS_FSMC_NORSRAM_DEVICE(Device)); + assert_param(IS_FSMC_NORSRAM_BANK(Init->NSBank)); + assert_param(IS_FSMC_MUX(Init->DataAddressMux)); + assert_param(IS_FSMC_MEMORY(Init->MemoryType)); + assert_param(IS_FSMC_NORSRAM_MEMORY_WIDTH(Init->MemoryDataWidth)); + assert_param(IS_FSMC_BURSTMODE(Init->BurstAccessMode)); + assert_param(IS_FSMC_WAIT_POLARITY(Init->WaitSignalPolarity)); +#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) + assert_param(IS_FSMC_WRAP_MODE(Init->WrapMode)); +#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx */ + assert_param(IS_FSMC_WAIT_SIGNAL_ACTIVE(Init->WaitSignalActive)); + assert_param(IS_FSMC_WRITE_OPERATION(Init->WriteOperation)); + assert_param(IS_FSMC_WAITE_SIGNAL(Init->WaitSignal)); + assert_param(IS_FSMC_EXTENDED_MODE(Init->ExtendedMode)); + assert_param(IS_FSMC_ASYNWAIT(Init->AsynchronousWait)); + assert_param(IS_FSMC_WRITE_BURST(Init->WriteBurst)); + assert_param(IS_FSMC_PAGESIZE(Init->PageSize)); +#if defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F413xx) || defined(STM32F423xx) + assert_param(IS_FSMC_WRITE_FIFO(Init->WriteFifo)); + assert_param(IS_FSMC_CONTINOUS_CLOCK(Init->ContinuousClock)); +#endif /* STM32F412Zx || STM32F412Vx || STM32F413xx || STM32F423xx */ + + /* Get the BTCR register value */ + tmpr = Device->BTCR[Init->NSBank]; + +#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) + /* Clear MBKEN, MUXEN, MTYP, MWID, FACCEN, BURSTEN, WAITPOL, WRAPMOD, WAITCFG, WREN, + WAITEN, EXTMOD, ASYNCWAIT, CPSIZE and CBURSTRW bits */ + tmpr &= ((uint32_t)~(FSMC_BCR1_MBKEN | FSMC_BCR1_MUXEN | FSMC_BCR1_MTYP | \ + FSMC_BCR1_MWID | FSMC_BCR1_FACCEN | FSMC_BCR1_BURSTEN | \ + FSMC_BCR1_WAITPOL | FSMC_BCR1_WRAPMOD | FSMC_BCR1_WAITCFG | \ + FSMC_BCR1_WREN | FSMC_BCR1_WAITEN | FSMC_BCR1_EXTMOD | \ + FSMC_BCR1_ASYNCWAIT | FSMC_BCR1_CPSIZE | FSMC_BCR1_CBURSTRW)); + /* Set NORSRAM device control parameters */ + tmpr |= (uint32_t)(Init->DataAddressMux |\ + Init->MemoryType |\ + Init->MemoryDataWidth |\ + Init->BurstAccessMode |\ + Init->WaitSignalPolarity |\ + Init->WrapMode |\ + Init->WaitSignalActive |\ + Init->WriteOperation |\ + Init->WaitSignal |\ + Init->ExtendedMode |\ + Init->AsynchronousWait |\ + Init->PageSize |\ + Init->WriteBurst + ); +#else /* STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F413xx || STM32F423xx */ + /* Clear MBKEN, MUXEN, MTYP, MWID, FACCEN, BURSTEN, WAITPOL, WAITCFG, WREN, + WAITEN, EXTMOD, ASYNCWAIT,CPSIZE, CBURSTRW, CCLKEN and WFDIS bits */ + tmpr &= ((uint32_t)~(FSMC_BCR1_MBKEN | FSMC_BCR1_MUXEN | FSMC_BCR1_MTYP | \ + FSMC_BCR1_MWID | FSMC_BCR1_FACCEN | FSMC_BCR1_BURSTEN | \ + FSMC_BCR1_WAITPOL | FSMC_BCR1_WAITCFG | FSMC_BCR1_WREN | \ + FSMC_BCR1_WAITEN | FSMC_BCR1_EXTMOD | FSMC_BCR1_ASYNCWAIT | \ + FSMC_BCR1_CPSIZE | FSMC_BCR1_CBURSTRW | FSMC_BCR1_CCLKEN | \ + FSMC_BCR1_WFDIS)); + /* Set NORSRAM device control parameters */ + tmpr |= (uint32_t)(Init->DataAddressMux |\ + Init->MemoryType |\ + Init->MemoryDataWidth |\ + Init->BurstAccessMode |\ + Init->WaitSignalPolarity |\ + Init->WaitSignalActive |\ + Init->WriteOperation |\ + Init->WaitSignal |\ + Init->ExtendedMode |\ + Init->AsynchronousWait |\ + Init->WriteBurst |\ + Init->ContinuousClock |\ + Init->PageSize |\ + Init->WriteFifo); +#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx */ + + if(Init->MemoryType == FSMC_MEMORY_TYPE_NOR) + { + tmpr |= (uint32_t)FSMC_NORSRAM_FLASH_ACCESS_ENABLE; + } + + Device->BTCR[Init->NSBank] = tmpr; + +#if defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F413xx) || defined(STM32F423xx) + /* Configure synchronous mode when Continuous clock is enabled for bank2..4 */ + if((Init->ContinuousClock == FSMC_CONTINUOUS_CLOCK_SYNC_ASYNC) && (Init->NSBank != FSMC_NORSRAM_BANK1)) + { + Device->BTCR[FSMC_NORSRAM_BANK1] |= (uint32_t)(Init->ContinuousClock); + } + + if(Init->NSBank != FSMC_NORSRAM_BANK1) + { + Device->BTCR[FSMC_NORSRAM_BANK1] |= (uint32_t)(Init->WriteFifo); + } +#endif /* STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F413xx || STM32F423xx */ + + return HAL_OK; +} + +/** + * @brief DeInitialize the FSMC_NORSRAM peripheral + * @param Device Pointer to NORSRAM device instance + * @param ExDevice Pointer to NORSRAM extended mode device instance + * @param Bank NORSRAM bank number + * @retval HAL status + */ +HAL_StatusTypeDef FSMC_NORSRAM_DeInit(FSMC_NORSRAM_TypeDef *Device, FSMC_NORSRAM_EXTENDED_TypeDef *ExDevice, uint32_t Bank) +{ + /* Check the parameters */ + assert_param(IS_FSMC_NORSRAM_DEVICE(Device)); + assert_param(IS_FSMC_NORSRAM_EXTENDED_DEVICE(ExDevice)); + assert_param(IS_FSMC_NORSRAM_BANK(Bank)); + + /* Disable the FSMC_NORSRAM device */ + __FSMC_NORSRAM_DISABLE(Device, Bank); + + /* De-initialize the FSMC_NORSRAM device */ + /* FSMC_NORSRAM_BANK1 */ + if(Bank == FSMC_NORSRAM_BANK1) + { + Device->BTCR[Bank] = 0x000030DBU; + } + /* FSMC_NORSRAM_BANK2, FSMC_NORSRAM_BANK3 or FSMC_NORSRAM_BANK4 */ + else + { + Device->BTCR[Bank] = 0x000030D2U; + } + + Device->BTCR[Bank + 1U] = 0x0FFFFFFFU; + ExDevice->BWTR[Bank] = 0x0FFFFFFFU; + + return HAL_OK; +} + + +/** + * @brief Initialize the FSMC_NORSRAM Timing according to the specified + * parameters in the FSMC_NORSRAM_TimingTypeDef + * @param Device Pointer to NORSRAM device instance + * @param Timing Pointer to NORSRAM Timing structure + * @param Bank NORSRAM bank number + * @retval HAL status + */ +HAL_StatusTypeDef FSMC_NORSRAM_Timing_Init(FSMC_NORSRAM_TypeDef *Device, FSMC_NORSRAM_TimingTypeDef *Timing, uint32_t Bank) +{ + uint32_t tmpr = 0U; + + /* Check the parameters */ + assert_param(IS_FSMC_NORSRAM_DEVICE(Device)); + assert_param(IS_FSMC_ADDRESS_SETUP_TIME(Timing->AddressSetupTime)); + assert_param(IS_FSMC_ADDRESS_HOLD_TIME(Timing->AddressHoldTime)); + assert_param(IS_FSMC_DATASETUP_TIME(Timing->DataSetupTime)); + assert_param(IS_FSMC_TURNAROUND_TIME(Timing->BusTurnAroundDuration)); + assert_param(IS_FSMC_CLK_DIV(Timing->CLKDivision)); + assert_param(IS_FSMC_DATA_LATENCY(Timing->DataLatency)); + assert_param(IS_FSMC_ACCESS_MODE(Timing->AccessMode)); + assert_param(IS_FSMC_NORSRAM_BANK(Bank)); + + /* Get the BTCR register value */ + tmpr = Device->BTCR[Bank + 1U]; + + /* Clear ADDSET, ADDHLD, DATAST, BUSTURN, CLKDIV, DATLAT and ACCMOD bits */ + tmpr &= ((uint32_t)~(FSMC_BTR1_ADDSET | FSMC_BTR1_ADDHLD | FSMC_BTR1_DATAST | \ + FSMC_BTR1_BUSTURN | FSMC_BTR1_CLKDIV | FSMC_BTR1_DATLAT | \ + FSMC_BTR1_ACCMOD)); + + /* Set FSMC_NORSRAM device timing parameters */ + tmpr |= (uint32_t)(Timing->AddressSetupTime |\ + ((Timing->AddressHoldTime) << 4U) |\ + ((Timing->DataSetupTime) << 8U) |\ + ((Timing->BusTurnAroundDuration) << 16U) |\ + (((Timing->CLKDivision)-1U) << 20U) |\ + (((Timing->DataLatency)-2U) << 24U) |\ + (Timing->AccessMode)); + + Device->BTCR[Bank + 1] = tmpr; + +#if defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F413xx) || defined(STM32F423xx) + /* Configure Clock division value (in NORSRAM bank 1) when continuous clock is enabled */ + if(HAL_IS_BIT_SET(Device->BTCR[FSMC_NORSRAM_BANK1], FSMC_BCR1_CCLKEN)) + { + tmpr = (uint32_t)(Device->BTCR[FSMC_NORSRAM_BANK1 + 1U] & ~(0x0FU << 20U)); + tmpr |= (uint32_t)(((Timing->CLKDivision)-1U) << 20U); + Device->BTCR[FSMC_NORSRAM_BANK1 + 1U] = tmpr; + } +#endif /* STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F413xx || STM32F423xx */ + + return HAL_OK; +} + +/** + * @brief Initialize the FSMC_NORSRAM Extended mode Timing according to the specified + * parameters in the FSMC_NORSRAM_TimingTypeDef + * @param Device Pointer to NORSRAM device instance + * @param Timing Pointer to NORSRAM Timing structure + * @param Bank NORSRAM bank number + * @retval HAL status + */ +HAL_StatusTypeDef FSMC_NORSRAM_Extended_Timing_Init(FSMC_NORSRAM_EXTENDED_TypeDef *Device, FSMC_NORSRAM_TimingTypeDef *Timing, uint32_t Bank, uint32_t ExtendedMode) +{ + uint32_t tmpr = 0U; + + /* Check the parameters */ + assert_param(IS_FSMC_EXTENDED_MODE(ExtendedMode)); + + /* Set NORSRAM device timing register for write configuration, if extended mode is used */ + if(ExtendedMode == FSMC_EXTENDED_MODE_ENABLE) + { + /* Check the parameters */ + assert_param(IS_FSMC_NORSRAM_EXTENDED_DEVICE(Device)); + assert_param(IS_FSMC_ADDRESS_SETUP_TIME(Timing->AddressSetupTime)); + assert_param(IS_FSMC_ADDRESS_HOLD_TIME(Timing->AddressHoldTime)); + assert_param(IS_FSMC_DATASETUP_TIME(Timing->DataSetupTime)); + assert_param(IS_FSMC_TURNAROUND_TIME(Timing->BusTurnAroundDuration)); + assert_param(IS_FSMC_ACCESS_MODE(Timing->AccessMode)); + assert_param(IS_FSMC_NORSRAM_BANK(Bank)); + + /* Get the BWTR register value */ + tmpr = Device->BWTR[Bank]; + + /* Clear ADDSET, ADDHLD, DATAST, BUSTURN and ACCMOD bits */ + tmpr &= ((uint32_t)~(FSMC_BWTR1_ADDSET | FSMC_BWTR1_ADDHLD | FSMC_BWTR1_DATAST | \ + FSMC_BWTR1_BUSTURN | FSMC_BWTR1_ACCMOD)); + + tmpr |= (uint32_t)(Timing->AddressSetupTime |\ + ((Timing->AddressHoldTime) << 4U) |\ + ((Timing->DataSetupTime) << 8U) |\ + ((Timing->BusTurnAroundDuration) << 16U) |\ + (Timing->AccessMode)); + + Device->BWTR[Bank] = tmpr; + } + else + { + Device->BWTR[Bank] = 0x0FFFFFFFU; + } + + return HAL_OK; +} +/** + * @} + */ + +/** @addtogroup FSMC_LL_NORSRAM_Private_Functions_Group2 + * @brief management functions + * +@verbatim + ============================================================================== + ##### FSMC_NORSRAM Control functions ##### + ============================================================================== + [..] + This subsection provides a set of functions allowing to control dynamically + the FSMC NORSRAM interface. + +@endverbatim + * @{ + */ + +/** + * @brief Enables dynamically FSMC_NORSRAM write operation. + * @param Device Pointer to NORSRAM device instance + * @param Bank NORSRAM bank number + * @retval HAL status + */ +HAL_StatusTypeDef FSMC_NORSRAM_WriteOperation_Enable(FSMC_NORSRAM_TypeDef *Device, uint32_t Bank) +{ + /* Check the parameters */ + assert_param(IS_FSMC_NORSRAM_DEVICE(Device)); + assert_param(IS_FSMC_NORSRAM_BANK(Bank)); + + /* Enable write operation */ + Device->BTCR[Bank] |= FSMC_WRITE_OPERATION_ENABLE; + + return HAL_OK; +} + +/** + * @brief Disables dynamically FSMC_NORSRAM write operation. + * @param Device Pointer to NORSRAM device instance + * @param Bank NORSRAM bank number + * @retval HAL status + */ +HAL_StatusTypeDef FSMC_NORSRAM_WriteOperation_Disable(FSMC_NORSRAM_TypeDef *Device, uint32_t Bank) +{ + /* Check the parameters */ + assert_param(IS_FSMC_NORSRAM_DEVICE(Device)); + assert_param(IS_FSMC_NORSRAM_BANK(Bank)); + + /* Disable write operation */ + Device->BTCR[Bank] &= ~FSMC_WRITE_OPERATION_ENABLE; + + return HAL_OK; +} +/** + * @} + */ + +/** + * @} + */ + +#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) +/** @addtogroup FSMC_LL_NAND + * @brief NAND Controller functions + * + @verbatim + ============================================================================== + ##### How to use NAND device driver ##### + ============================================================================== + [..] + This driver contains a set of APIs to interface with the FSMC NAND banks in order + to run the NAND external devices. + + (+) FSMC NAND bank reset using the function FSMC_NAND_DeInit() + (+) FSMC NAND bank control configuration using the function FSMC_NAND_Init() + (+) FSMC NAND bank common space timing configuration using the function + FSMC_NAND_CommonSpace_Timing_Init() + (+) FSMC NAND bank attribute space timing configuration using the function + FSMC_NAND_AttributeSpace_Timing_Init() + (+) FSMC NAND bank enable/disable ECC correction feature using the functions + FSMC_NAND_ECC_Enable()/FSMC_NAND_ECC_Disable() + (+) FSMC NAND bank get ECC correction code using the function FSMC_NAND_GetECC() + +@endverbatim + * @{ + */ + +/** @addtogroup FSMC_LL_NAND_Private_Functions_Group1 + * @brief Initialization and Configuration functions + * +@verbatim + ============================================================================== + ##### Initialization and de_initialization functions ##### + ============================================================================== + [..] + This section provides functions allowing to: + (+) Initialize and configure the FSMC NAND interface + (+) De-initialize the FSMC NAND interface + (+) Configure the FSMC clock and associated GPIOs + +@endverbatim + * @{ + */ + +/** + * @brief Initializes the FSMC_NAND device according to the specified + * control parameters in the FSMC_NAND_HandleTypeDef + * @param Device Pointer to NAND device instance + * @param Init Pointer to NAND Initialization structure + * @retval HAL status + */ +HAL_StatusTypeDef FSMC_NAND_Init(FSMC_NAND_TypeDef *Device, FSMC_NAND_InitTypeDef *Init) +{ + uint32_t tmpr = 0U; + + /* Check the parameters */ + assert_param(IS_FSMC_NAND_BANK(Init->NandBank)); + assert_param(IS_FSMC_WAIT_FEATURE(Init->Waitfeature)); + assert_param(IS_FSMC_NAND_MEMORY_WIDTH(Init->MemoryDataWidth)); + assert_param(IS_FSMC_ECC_STATE(Init->EccComputation)); + assert_param(IS_FSMC_ECCPAGE_SIZE(Init->ECCPageSize)); + assert_param(IS_FSMC_TCLR_TIME(Init->TCLRSetupTime)); + assert_param(IS_FSMC_TAR_TIME(Init->TARSetupTime)); + + if(Init->NandBank == FSMC_NAND_BANK2) + { + /* Get the NAND bank 2 register value */ + tmpr = Device->PCR2; + } + else + { + /* Get the NAND bank 3 register value */ + tmpr = Device->PCR3; + } + + /* Clear PWAITEN, PBKEN, PTYP, PWID, ECCEN, TCLR, TAR and ECCPS bits */ + tmpr &= ((uint32_t)~(FSMC_PCR2_PWAITEN | FSMC_PCR2_PBKEN | FSMC_PCR2_PTYP | \ + FSMC_PCR2_PWID | FSMC_PCR2_ECCEN | FSMC_PCR2_TCLR | \ + FSMC_PCR2_TAR | FSMC_PCR2_ECCPS)); + + /* Set NAND device control parameters */ + tmpr |= (uint32_t)(Init->Waitfeature |\ + FSMC_PCR_MEMORY_TYPE_NAND |\ + Init->MemoryDataWidth |\ + Init->EccComputation |\ + Init->ECCPageSize |\ + ((Init->TCLRSetupTime) << 9U) |\ + ((Init->TARSetupTime) << 13U)); + + if(Init->NandBank == FSMC_NAND_BANK2) + { + /* NAND bank 2 registers configuration */ + Device->PCR2 = tmpr; + } + else + { + /* NAND bank 3 registers configuration */ + Device->PCR3 = tmpr; + } + + return HAL_OK; +} + +/** + * @brief Initializes the FSMC_NAND Common space Timing according to the specified + * parameters in the FSMC_NAND_PCC_TimingTypeDef + * @param Device Pointer to NAND device instance + * @param Timing Pointer to NAND timing structure + * @param Bank NAND bank number + * @retval HAL status + */ +HAL_StatusTypeDef FSMC_NAND_CommonSpace_Timing_Init(FSMC_NAND_TypeDef *Device, FSMC_NAND_PCC_TimingTypeDef *Timing, uint32_t Bank) +{ + uint32_t tmpr = 0U; + + /* Check the parameters */ + assert_param(IS_FSMC_SETUP_TIME(Timing->SetupTime)); + assert_param(IS_FSMC_WAIT_TIME(Timing->WaitSetupTime)); + assert_param(IS_FSMC_HOLD_TIME(Timing->HoldSetupTime)); + assert_param(IS_FSMC_HIZ_TIME(Timing->HiZSetupTime)); + + if(Bank == FSMC_NAND_BANK2) + { + /* Get the NAND bank 2 register value */ + tmpr = Device->PMEM2; + } + else + { + /* Get the NAND bank 3 register value */ + tmpr = Device->PMEM3; + } + + /* Clear MEMSETx, MEMWAITx, MEMHOLDx and MEMHIZx bits */ + tmpr &= ((uint32_t)~(FSMC_PMEM2_MEMSET2 | FSMC_PMEM2_MEMWAIT2 | FSMC_PMEM2_MEMHOLD2 | \ + FSMC_PMEM2_MEMHIZ2)); + + /* Set FSMC_NAND device timing parameters */ + tmpr |= (uint32_t)(Timing->SetupTime |\ + ((Timing->WaitSetupTime) << 8U) |\ + ((Timing->HoldSetupTime) << 16U) |\ + ((Timing->HiZSetupTime) << 24U) + ); + + if(Bank == FSMC_NAND_BANK2) + { + /* NAND bank 2 registers configuration */ + Device->PMEM2 = tmpr; + } + else + { + /* NAND bank 3 registers configuration */ + Device->PMEM3 = tmpr; + } + + return HAL_OK; +} + +/** + * @brief Initializes the FSMC_NAND Attribute space Timing according to the specified + * parameters in the FSMC_NAND_PCC_TimingTypeDef + * @param Device Pointer to NAND device instance + * @param Timing Pointer to NAND timing structure + * @param Bank NAND bank number + * @retval HAL status + */ +HAL_StatusTypeDef FSMC_NAND_AttributeSpace_Timing_Init(FSMC_NAND_TypeDef *Device, FSMC_NAND_PCC_TimingTypeDef *Timing, uint32_t Bank) +{ + uint32_t tmpr = 0U; + + /* Check the parameters */ + assert_param(IS_FSMC_SETUP_TIME(Timing->SetupTime)); + assert_param(IS_FSMC_WAIT_TIME(Timing->WaitSetupTime)); + assert_param(IS_FSMC_HOLD_TIME(Timing->HoldSetupTime)); + assert_param(IS_FSMC_HIZ_TIME(Timing->HiZSetupTime)); + + if(Bank == FSMC_NAND_BANK2) + { + /* Get the NAND bank 2 register value */ + tmpr = Device->PATT2; + } + else + { + /* Get the NAND bank 3 register value */ + tmpr = Device->PATT3; + } + + /* Clear ATTSETx, ATTWAITx, ATTHOLDx and ATTHIZx bits */ + tmpr &= ((uint32_t)~(FSMC_PATT2_ATTSET2 | FSMC_PATT2_ATTWAIT2 | FSMC_PATT2_ATTHOLD2 | \ + FSMC_PATT2_ATTHIZ2)); + + /* Set FSMC_NAND device timing parameters */ + tmpr |= (uint32_t)(Timing->SetupTime |\ + ((Timing->WaitSetupTime) << 8U) |\ + ((Timing->HoldSetupTime) << 16U) |\ + ((Timing->HiZSetupTime) << 24U) + ); + + if(Bank == FSMC_NAND_BANK2) + { + /* NAND bank 2 registers configuration */ + Device->PATT2 = tmpr; + } + else + { + /* NAND bank 3 registers configuration */ + Device->PATT3 = tmpr; + } + + return HAL_OK; +} + +/** + * @brief DeInitializes the FSMC_NAND device + * @param Device Pointer to NAND device instance + * @param Bank NAND bank number + * @retval HAL status + */ +HAL_StatusTypeDef FSMC_NAND_DeInit(FSMC_NAND_TypeDef *Device, uint32_t Bank) +{ + /* Disable the NAND Bank */ + __FSMC_NAND_DISABLE(Device, Bank); + + /* De-initialize the NAND Bank */ + if(Bank == FSMC_NAND_BANK2) + { + /* Set the FSMC_NAND_BANK2 registers to their reset values */ + Device->PCR2 = 0x00000018U; + Device->SR2 = 0x00000040U; + Device->PMEM2 = 0xFCFCFCFCU; + Device->PATT2 = 0xFCFCFCFCU; + } + /* FSMC_Bank3_NAND */ + else + { + /* Set the FSMC_NAND_BANK3 registers to their reset values */ + Device->PCR3 = 0x00000018U; + Device->SR3 = 0x00000040U; + Device->PMEM3 = 0xFCFCFCFCU; + Device->PATT3 = 0xFCFCFCFCU; + } + + return HAL_OK; +} +/** + * @} + */ + +/** @addtogroup FSMC_LL_NAND_Private_Functions_Group2 + * @brief management functions + * +@verbatim + ============================================================================== + ##### FSMC_NAND Control functions ##### + ============================================================================== + [..] + This subsection provides a set of functions allowing to control dynamically + the FSMC NAND interface. + +@endverbatim + * @{ + */ + +/** + * @brief Enables dynamically FSMC_NAND ECC feature. + * @param Device Pointer to NAND device instance + * @param Bank NAND bank number + * @retval HAL status + */ +HAL_StatusTypeDef FSMC_NAND_ECC_Enable(FSMC_NAND_TypeDef *Device, uint32_t Bank) +{ + /* Enable ECC feature */ + if(Bank == FSMC_NAND_BANK2) + { + Device->PCR2 |= FSMC_PCR2_ECCEN; + } + else + { + Device->PCR3 |= FSMC_PCR3_ECCEN; + } + + return HAL_OK; +} + +/** + * @brief Disables dynamically FSMC_NAND ECC feature. + * @param Device Pointer to NAND device instance + * @param Bank NAND bank number + * @retval HAL status + */ +HAL_StatusTypeDef FSMC_NAND_ECC_Disable(FSMC_NAND_TypeDef *Device, uint32_t Bank) +{ + /* Disable ECC feature */ + if(Bank == FSMC_NAND_BANK2) + { + Device->PCR2 &= ~FSMC_PCR2_ECCEN; + } + else + { + Device->PCR3 &= ~FSMC_PCR3_ECCEN; + } + + return HAL_OK; +} + +/** + * @brief Disables dynamically FSMC_NAND ECC feature. + * @param Device Pointer to NAND device instance + * @param ECCval Pointer to ECC value + * @param Bank NAND bank number + * @param Timeout Timeout wait value + * @retval HAL status + */ +HAL_StatusTypeDef FSMC_NAND_GetECC(FSMC_NAND_TypeDef *Device, uint32_t *ECCval, uint32_t Bank, uint32_t Timeout) +{ + uint32_t tickstart = 0U; + + /* Check the parameters */ + assert_param(IS_FSMC_NAND_DEVICE(Device)); + assert_param(IS_FSMC_NAND_BANK(Bank)); + + /* Get tick */ + tickstart = HAL_GetTick(); + + /* Wait until FIFO is empty */ + while(__FSMC_NAND_GET_FLAG(Device, Bank, FSMC_FLAG_FEMPT) == RESET) + { + /* Check for the Timeout */ + if(Timeout != HAL_MAX_DELAY) + { + if((Timeout == 0U)||((HAL_GetTick() - tickstart ) > Timeout)) + { + return HAL_TIMEOUT; + } + } + } + + if(Bank == FSMC_NAND_BANK2) + { + /* Get the ECCR2 register value */ + *ECCval = (uint32_t)Device->ECCR2; + } + else + { + /* Get the ECCR3 register value */ + *ECCval = (uint32_t)Device->ECCR3; + } + + return HAL_OK; +} + +/** + * @} + */ + +/** + * @} + */ + +/** @addtogroup FSMC_LL_PCCARD + * @brief PCCARD Controller functions + * + @verbatim + ============================================================================== + ##### How to use PCCARD device driver ##### + ============================================================================== + [..] + This driver contains a set of APIs to interface with the FSMC PCCARD bank in order + to run the PCCARD/compact flash external devices. + + (+) FSMC PCCARD bank reset using the function FSMC_PCCARD_DeInit() + (+) FSMC PCCARD bank control configuration using the function FSMC_PCCARD_Init() + (+) FSMC PCCARD bank common space timing configuration using the function + FSMC_PCCARD_CommonSpace_Timing_Init() + (+) FSMC PCCARD bank attribute space timing configuration using the function + FSMC_PCCARD_AttributeSpace_Timing_Init() + (+) FSMC PCCARD bank IO space timing configuration using the function + FSMC_PCCARD_IOSpace_Timing_Init() + +@endverbatim + * @{ + */ + +/** @addtogroup FSMC_LL_PCCARD_Private_Functions_Group1 + * @brief Initialization and Configuration functions + * +@verbatim + ============================================================================== + ##### Initialization and de_initialization functions ##### + ============================================================================== + [..] + This section provides functions allowing to: + (+) Initialize and configure the FSMC PCCARD interface + (+) De-initialize the FSMC PCCARD interface + (+) Configure the FSMC clock and associated GPIOs + +@endverbatim + * @{ + */ + +/** + * @brief Initializes the FSMC_PCCARD device according to the specified + * control parameters in the FSMC_PCCARD_HandleTypeDef + * @param Device Pointer to PCCARD device instance + * @param Init Pointer to PCCARD Initialization structure + * @retval HAL status + */ +HAL_StatusTypeDef FSMC_PCCARD_Init(FSMC_PCCARD_TypeDef *Device, FSMC_PCCARD_InitTypeDef *Init) +{ + uint32_t tmpr = 0U; + + /* Check the parameters */ + assert_param(IS_FSMC_WAIT_FEATURE(Init->Waitfeature)); + assert_param(IS_FSMC_TCLR_TIME(Init->TCLRSetupTime)); + assert_param(IS_FSMC_TAR_TIME(Init->TARSetupTime)); + + /* Get PCCARD control register value */ + tmpr = Device->PCR4; + + /* Clear TAR, TCLR, PWAITEN and PWID bits */ + tmpr &= ((uint32_t)~(FSMC_PCR4_TAR | FSMC_PCR4_TCLR | FSMC_PCR4_PWAITEN | \ + FSMC_PCR4_PWID | FSMC_PCR4_PTYP)); + + /* Set FSMC_PCCARD device control parameters */ + tmpr |= (uint32_t)(Init->Waitfeature |\ + FSMC_NAND_PCC_MEM_BUS_WIDTH_16 |\ + (Init->TCLRSetupTime << 9U) |\ + (Init->TARSetupTime << 13U)); + + Device->PCR4 = tmpr; + + return HAL_OK; +} + +/** + * @brief Initializes the FSMC_PCCARD Common space Timing according to the specified + * parameters in the FSMC_NAND_PCC_TimingTypeDef + * @param Device Pointer to PCCARD device instance + * @param Timing Pointer to PCCARD timing structure + * @retval HAL status + */ +HAL_StatusTypeDef FSMC_PCCARD_CommonSpace_Timing_Init(FSMC_PCCARD_TypeDef *Device, FSMC_NAND_PCC_TimingTypeDef *Timing) +{ + uint32_t tmpr = 0U; + + /* Check the parameters */ + assert_param(IS_FSMC_SETUP_TIME(Timing->SetupTime)); + assert_param(IS_FSMC_WAIT_TIME(Timing->WaitSetupTime)); + assert_param(IS_FSMC_HOLD_TIME(Timing->HoldSetupTime)); + assert_param(IS_FSMC_HIZ_TIME(Timing->HiZSetupTime)); + + /* Get PCCARD common space timing register value */ + tmpr = Device->PMEM4; + + /* Clear MEMSETx, MEMWAITx, MEMHOLDx and MEMHIZx bits */ + tmpr &= ((uint32_t)~(FSMC_PMEM4_MEMSET4 | FSMC_PMEM4_MEMWAIT4 | FSMC_PMEM4_MEMHOLD4 | \ + FSMC_PMEM4_MEMHIZ4)); + /* Set PCCARD timing parameters */ + tmpr |= (uint32_t)((Timing->SetupTime |\ + ((Timing->WaitSetupTime) << 8U) |\ + (Timing->HoldSetupTime) << 16U) |\ + ((Timing->HiZSetupTime) << 24U)); + + Device->PMEM4 = tmpr; + + return HAL_OK; +} + +/** + * @brief Initializes the FSMC_PCCARD Attribute space Timing according to the specified + * parameters in the FSMC_NAND_PCC_TimingTypeDef + * @param Device Pointer to PCCARD device instance + * @param Timing Pointer to PCCARD timing structure + * @retval HAL status + */ +HAL_StatusTypeDef FSMC_PCCARD_AttributeSpace_Timing_Init(FSMC_PCCARD_TypeDef *Device, FSMC_NAND_PCC_TimingTypeDef *Timing) +{ + uint32_t tmpr = 0U; + + /* Check the parameters */ + assert_param(IS_FSMC_SETUP_TIME(Timing->SetupTime)); + assert_param(IS_FSMC_WAIT_TIME(Timing->WaitSetupTime)); + assert_param(IS_FSMC_HOLD_TIME(Timing->HoldSetupTime)); + assert_param(IS_FSMC_HIZ_TIME(Timing->HiZSetupTime)); + + /* Get PCCARD timing parameters */ + tmpr = Device->PATT4; + + /* Clear ATTSETx, ATTWAITx, ATTHOLDx and ATTHIZx bits */ + tmpr &= ((uint32_t)~(FSMC_PATT4_ATTSET4 | FSMC_PATT4_ATTWAIT4 | FSMC_PATT4_ATTHOLD4 | \ + FSMC_PATT4_ATTHIZ4)); + + /* Set PCCARD timing parameters */ + tmpr |= (uint32_t)(Timing->SetupTime |\ + ((Timing->WaitSetupTime) << 8U) |\ + ((Timing->HoldSetupTime) << 16U) |\ + ((Timing->HiZSetupTime) << 24U)); + Device->PATT4 = tmpr; + + return HAL_OK; +} + +/** + * @brief Initializes the FSMC_PCCARD IO space Timing according to the specified + * parameters in the FSMC_NAND_PCC_TimingTypeDef + * @param Device Pointer to PCCARD device instance + * @param Timing Pointer to PCCARD timing structure + * @retval HAL status + */ +HAL_StatusTypeDef FSMC_PCCARD_IOSpace_Timing_Init(FSMC_PCCARD_TypeDef *Device, FSMC_NAND_PCC_TimingTypeDef *Timing) +{ + uint32_t tmpr = 0U; + + /* Check the parameters */ + assert_param(IS_FSMC_SETUP_TIME(Timing->SetupTime)); + assert_param(IS_FSMC_WAIT_TIME(Timing->WaitSetupTime)); + assert_param(IS_FSMC_HOLD_TIME(Timing->HoldSetupTime)); + assert_param(IS_FSMC_HIZ_TIME(Timing->HiZSetupTime)); + + /* Get FSMC_PCCARD device timing parameters */ + tmpr = Device->PIO4; + + /* Clear IOSET4, IOWAIT4, IOHOLD4 and IOHIZ4 bits */ + tmpr &= ((uint32_t)~(FSMC_PIO4_IOSET4 | FSMC_PIO4_IOWAIT4 | FSMC_PIO4_IOHOLD4 | \ + FSMC_PIO4_IOHIZ4)); + + /* Set FSMC_PCCARD device timing parameters */ + tmpr |= (uint32_t)(Timing->SetupTime |\ + ((Timing->WaitSetupTime) << 8U) |\ + ((Timing->HoldSetupTime) << 16U) |\ + ((Timing->HiZSetupTime) << 24U)); + + Device->PIO4 = tmpr; + + return HAL_OK; +} + +/** + * @brief DeInitializes the FSMC_PCCARD device + * @param Device Pointer to PCCARD device instance + * @retval HAL status + */ +HAL_StatusTypeDef FSMC_PCCARD_DeInit(FSMC_PCCARD_TypeDef *Device) +{ + /* Disable the FSMC_PCCARD device */ + __FSMC_PCCARD_DISABLE(Device); + + /* De-initialize the FSMC_PCCARD device */ + Device->PCR4 = 0x00000018U; + Device->SR4 = 0x00000000U; + Device->PMEM4 = 0xFCFCFCFCU; + Device->PATT4 = 0xFCFCFCFCU; + Device->PIO4 = 0xFCFCFCFCU; + + return HAL_OK; +} +/** + * @} + */ + +/** + * @} + */ +#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx */ + +/** + * @} + */ +#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F412Zx || STM32F412Vx || STM32F413xx || STM32F423xx */ +#endif /* HAL_SRAM_MODULE_ENABLED || HAL_NOR_MODULE_ENABLED || HAL_NAND_MODULE_ENABLED || HAL_PCCARD_MODULE_ENABLED */ + +/** + * @} + */ + +/** + * @} + */ +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_sdmmc.c b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_sdmmc.c new file mode 100644 index 0000000..a0eeb2e --- /dev/null +++ b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_sdmmc.c @@ -0,0 +1,1491 @@ +/** + ****************************************************************************** + * @file stm32f4xx_ll_sdmmc.c + * @author MCD Application Team + * @brief SDMMC Low Layer HAL module driver. + * + * This file provides firmware functions to manage the following + * functionalities of the SDMMC peripheral: + * + Initialization/de-initialization functions + * + I/O operation functions + * + Peripheral Control functions + * + Peripheral State functions + * + @verbatim + ============================================================================== + ##### SDMMC peripheral features ##### + ============================================================================== + [..] The SD/SDMMC MMC card host interface (SDMMC) provides an interface between the APB2 + peripheral bus and MultiMedia cards (MMCs), SD memory cards, SDMMC cards and CE-ATA + devices. + + [..] The SDMMC features include the following: + (+) Full compliance with MultiMedia Card System Specification Version 4.2. Card support + for three different databus modes: 1-bit (default), 4-bit and 8-bit + (+) Full compatibility with previous versions of MultiMedia Cards (forward compatibility) + (+) Full compliance with SD Memory Card Specifications Version 2.0 + (+) Full compliance with SD I/O Card Specification Version 2.0: card support for two + different data bus modes: 1-bit (default) and 4-bit + (+) Full support of the CE-ATA features (full compliance with CE-ATA digital protocol + Rev1.1) + (+) Data transfer up to 48 MHz for the 8 bit mode + (+) Data and command output enable signals to control external bidirectional drivers. + + + ##### How to use this driver ##### + ============================================================================== + [..] + This driver is a considered as a driver of service for external devices drivers + that interfaces with the SDMMC peripheral. + According to the device used (SD card/ MMC card / SDMMC card ...), a set of APIs + is used in the device's driver to perform SDMMC operations and functionalities. + + This driver is almost transparent for the final user, it is only used to implement other + functionalities of the external device. + + [..] + (+) The SDMMC clock (SDMMCCLK = 48 MHz) is coming from a specific output of PLL + (PLL48CLK). Before start working with SDMMC peripheral make sure that the + PLL is well configured. + The SDMMC peripheral uses two clock signals: + (++) SDMMC adapter clock (SDMMCCLK = 48 MHz) + (++) APB2 bus clock (PCLK2) + + -@@- PCLK2 and SDMMC_CK clock frequencies must respect the following condition: + Frequency(PCLK2) >= (3 / 8 x Frequency(SDMMC_CK)) + + (+) Enable/Disable peripheral clock using RCC peripheral macros related to SDMMC + peripheral. + + (+) Enable the Power ON State using the SDIO_PowerState_ON(SDIOx) + function and disable it using the function SDIO_PowerState_ON(SDIOx). + + (+) Enable/Disable the clock using the __SDIO_ENABLE()/__SDIO_DISABLE() macros. + + (+) Enable/Disable the peripheral interrupts using the macros __SDIO_ENABLE_IT(hSDIO, IT) + and __SDIO_DISABLE_IT(hSDIO, IT) if you need to use interrupt mode. + + (+) When using the DMA mode + (++) Configure the DMA in the MSP layer of the external device + (++) Active the needed channel Request + (++) Enable the DMA using __SDIO_DMA_ENABLE() macro or Disable it using the macro + __SDIO_DMA_DISABLE(). + + (+) To control the CPSM (Command Path State Machine) and send + commands to the card use the SDIO_SendCommand(), + SDIO_GetCommandResponse() and SDIO_GetResponse() functions. First, user has + to fill the command structure (pointer to SDIO_CmdInitTypeDef) according + to the selected command to be sent. + The parameters that should be filled are: + (++) Command Argument + (++) Command Index + (++) Command Response type + (++) Command Wait + (++) CPSM Status (Enable or Disable). + + -@@- To check if the command is well received, read the SDIO_CMDRESP + register using the SDIO_GetCommandResponse(). + The SDMMC responses registers (SDIO_RESP1 to SDIO_RESP2), use the + SDIO_GetResponse() function. + + (+) To control the DPSM (Data Path State Machine) and send/receive + data to/from the card use the SDIO_ConfigData(), SDIO_GetDataCounter(), + SDIO_ReadFIFO(), SDIO_WriteFIFO() and SDIO_GetFIFOCount() functions. + + *** Read Operations *** + ======================= + [..] + (#) First, user has to fill the data structure (pointer to + SDIO_DataInitTypeDef) according to the selected data type to be received. + The parameters that should be filled are: + (++) Data TimeOut + (++) Data Length + (++) Data Block size + (++) Data Transfer direction: should be from card (To SDMMC) + (++) Data Transfer mode + (++) DPSM Status (Enable or Disable) + + (#) Configure the SDMMC resources to receive the data from the card + according to selected transfer mode (Refer to Step 8, 9 and 10). + + (#) Send the selected Read command (refer to step 11). + + (#) Use the SDIO flags/interrupts to check the transfer status. + + *** Write Operations *** + ======================== + [..] + (#) First, user has to fill the data structure (pointer to + SDIO_DataInitTypeDef) according to the selected data type to be received. + The parameters that should be filled are: + (++) Data TimeOut + (++) Data Length + (++) Data Block size + (++) Data Transfer direction: should be to card (To CARD) + (++) Data Transfer mode + (++) DPSM Status (Enable or Disable) + + (#) Configure the SDMMC resources to send the data to the card according to + selected transfer mode. + + (#) Send the selected Write command. + + (#) Use the SDIO flags/interrupts to check the transfer status. + + *** Command management operations *** + ===================================== + [..] + (#) The commands used for Read/Write/Erase operations are managed in + separate functions. + Each function allows to send the needed command with the related argument, + then check the response. + By the same approach, you could implement a command and check the response. + + @endverbatim + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2017 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f4xx_hal.h" + +/** @addtogroup STM32F4xx_HAL_Driver + * @{ + */ + +/** @defgroup SDMMC_LL SDMMC Low Layer + * @brief Low layer module for SD + * @{ + */ + +#if defined(HAL_SD_MODULE_ENABLED) || defined(HAL_MMC_MODULE_ENABLED) +#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) || \ + defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || \ + defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F446xx) || \ + defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || \ + defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx) + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +static uint32_t SDMMC_GetCmdError(SDIO_TypeDef *SDIOx); +static uint32_t SDMMC_GetCmdResp1(SDIO_TypeDef *SDIOx, uint8_t SD_CMD, uint32_t Timeout); +static uint32_t SDMMC_GetCmdResp2(SDIO_TypeDef *SDIOx); +static uint32_t SDMMC_GetCmdResp3(SDIO_TypeDef *SDIOx); +static uint32_t SDMMC_GetCmdResp7(SDIO_TypeDef *SDIOx); +static uint32_t SDMMC_GetCmdResp6(SDIO_TypeDef *SDIOx, uint8_t SD_CMD, uint16_t *pRCA); + +/* Exported functions --------------------------------------------------------*/ + +/** @defgroup SDMMC_LL_Exported_Functions SDMMC Low Layer Exported Functions + * @{ + */ + +/** @defgroup HAL_SDMMC_LL_Group1 Initialization de-initialization functions + * @brief Initialization and Configuration functions + * +@verbatim + =============================================================================== + ##### Initialization/de-initialization functions ##### + =============================================================================== + [..] This section provides functions allowing to: + +@endverbatim + * @{ + */ + +/** + * @brief Initializes the SDMMC according to the specified + * parameters in the SDMMC_InitTypeDef and create the associated handle. + * @param SDIOx Pointer to SDMMC register base + * @param Init SDMMC initialization structure + * @retval HAL status + */ +HAL_StatusTypeDef SDIO_Init(SDIO_TypeDef *SDIOx, SDIO_InitTypeDef Init) +{ + uint32_t tmpreg = 0U; + + /* Check the parameters */ + assert_param(IS_SDIO_ALL_INSTANCE(SDIOx)); + assert_param(IS_SDIO_CLOCK_EDGE(Init.ClockEdge)); + assert_param(IS_SDIO_CLOCK_BYPASS(Init.ClockBypass)); + assert_param(IS_SDIO_CLOCK_POWER_SAVE(Init.ClockPowerSave)); + assert_param(IS_SDIO_BUS_WIDE(Init.BusWide)); + assert_param(IS_SDIO_HARDWARE_FLOW_CONTROL(Init.HardwareFlowControl)); + assert_param(IS_SDIO_CLKDIV(Init.ClockDiv)); + + /* Set SDMMC configuration parameters */ + tmpreg |= (Init.ClockEdge |\ + Init.ClockBypass |\ + Init.ClockPowerSave |\ + Init.BusWide |\ + Init.HardwareFlowControl |\ + Init.ClockDiv + ); + + /* Write to SDMMC CLKCR */ + MODIFY_REG(SDIOx->CLKCR, CLKCR_CLEAR_MASK, tmpreg); + + return HAL_OK; +} + + +/** + * @} + */ + +/** @defgroup HAL_SDMMC_LL_Group2 IO operation functions + * @brief Data transfers functions + * +@verbatim + =============================================================================== + ##### I/O operation functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to manage the SDMMC data + transfers. + +@endverbatim + * @{ + */ + +/** + * @brief Read data (word) from Rx FIFO in blocking mode (polling) + * @param SDIOx Pointer to SDMMC register base + * @retval HAL status + */ +uint32_t SDIO_ReadFIFO(SDIO_TypeDef *SDIOx) +{ + /* Read data from Rx FIFO */ + return (SDIOx->FIFO); +} + +/** + * @brief Write data (word) to Tx FIFO in blocking mode (polling) + * @param SDIOx Pointer to SDMMC register base + * @param pWriteData pointer to data to write + * @retval HAL status + */ +HAL_StatusTypeDef SDIO_WriteFIFO(SDIO_TypeDef *SDIOx, uint32_t *pWriteData) +{ + /* Write data to FIFO */ + SDIOx->FIFO = *pWriteData; + + return HAL_OK; +} + +/** + * @} + */ + +/** @defgroup HAL_SDMMC_LL_Group3 Peripheral Control functions + * @brief management functions + * +@verbatim + =============================================================================== + ##### Peripheral Control functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to control the SDMMC data + transfers. + +@endverbatim + * @{ + */ + +/** + * @brief Set SDMMC Power state to ON. + * @param SDIOx Pointer to SDMMC register base + * @retval HAL status + */ +HAL_StatusTypeDef SDIO_PowerState_ON(SDIO_TypeDef *SDIOx) +{ + /* Set power state to ON */ + SDIOx->POWER = SDIO_POWER_PWRCTRL; + + return HAL_OK; +} + +/** + * @brief Set SDMMC Power state to OFF. + * @param SDIOx Pointer to SDMMC register base + * @retval HAL status + */ +HAL_StatusTypeDef SDIO_PowerState_OFF(SDIO_TypeDef *SDIOx) +{ + /* Set power state to OFF */ + SDIOx->POWER = 0x00000000U; + + return HAL_OK; +} + +/** + * @brief Get SDMMC Power state. + * @param SDIOx Pointer to SDMMC register base + * @retval Power status of the controller. The returned value can be one of the + * following values: + * - 0x00: Power OFF + * - 0x02: Power UP + * - 0x03: Power ON + */ +uint32_t SDIO_GetPowerState(SDIO_TypeDef *SDIOx) +{ + return (SDIOx->POWER & SDIO_POWER_PWRCTRL); +} + +/** + * @brief Configure the SDMMC command path according to the specified parameters in + * SDIO_CmdInitTypeDef structure and send the command + * @param SDIOx Pointer to SDMMC register base + * @param Command pointer to a SDIO_CmdInitTypeDef structure that contains + * the configuration information for the SDMMC command + * @retval HAL status + */ +HAL_StatusTypeDef SDIO_SendCommand(SDIO_TypeDef *SDIOx, SDIO_CmdInitTypeDef *Command) +{ + uint32_t tmpreg = 0U; + + /* Check the parameters */ + assert_param(IS_SDIO_CMD_INDEX(Command->CmdIndex)); + assert_param(IS_SDIO_RESPONSE(Command->Response)); + assert_param(IS_SDIO_WAIT(Command->WaitForInterrupt)); + assert_param(IS_SDIO_CPSM(Command->CPSM)); + + /* Set the SDMMC Argument value */ + SDIOx->ARG = Command->Argument; + + /* Set SDMMC command parameters */ + tmpreg |= (uint32_t)(Command->CmdIndex |\ + Command->Response |\ + Command->WaitForInterrupt |\ + Command->CPSM); + + /* Write to SDMMC CMD register */ + MODIFY_REG(SDIOx->CMD, CMD_CLEAR_MASK, tmpreg); + + return HAL_OK; +} + +/** + * @brief Return the command index of last command for which response received + * @param SDIOx Pointer to SDMMC register base + * @retval Command index of the last command response received + */ +uint8_t SDIO_GetCommandResponse(SDIO_TypeDef *SDIOx) +{ + return (uint8_t)(SDIOx->RESPCMD); +} + + +/** + * @brief Return the response received from the card for the last command + * @param SDIOx Pointer to SDMMC register base + * @param Response Specifies the SDMMC response register. + * This parameter can be one of the following values: + * @arg SDIO_RESP1: Response Register 1 + * @arg SDIO_RESP1: Response Register 2 + * @arg SDIO_RESP1: Response Register 3 + * @arg SDIO_RESP1: Response Register 4 + * @retval The Corresponding response register value + */ +uint32_t SDIO_GetResponse(SDIO_TypeDef *SDIOx, uint32_t Response) +{ + __IO uint32_t tmp = 0U; + + /* Check the parameters */ + assert_param(IS_SDIO_RESP(Response)); + + /* Get the response */ + tmp = (uint32_t)&(SDIOx->RESP1) + Response; + + return (*(__IO uint32_t *) tmp); +} + +/** + * @brief Configure the SDMMC data path according to the specified + * parameters in the SDIO_DataInitTypeDef. + * @param SDIOx Pointer to SDMMC register base + * @param Data pointer to a SDIO_DataInitTypeDef structure + * that contains the configuration information for the SDMMC data. + * @retval HAL status + */ +HAL_StatusTypeDef SDIO_ConfigData(SDIO_TypeDef *SDIOx, SDIO_DataInitTypeDef* Data) +{ + uint32_t tmpreg = 0U; + + /* Check the parameters */ + assert_param(IS_SDIO_DATA_LENGTH(Data->DataLength)); + assert_param(IS_SDIO_BLOCK_SIZE(Data->DataBlockSize)); + assert_param(IS_SDIO_TRANSFER_DIR(Data->TransferDir)); + assert_param(IS_SDIO_TRANSFER_MODE(Data->TransferMode)); + assert_param(IS_SDIO_DPSM(Data->DPSM)); + + /* Set the SDMMC Data TimeOut value */ + SDIOx->DTIMER = Data->DataTimeOut; + + /* Set the SDMMC DataLength value */ + SDIOx->DLEN = Data->DataLength; + + /* Set the SDMMC data configuration parameters */ + tmpreg |= (uint32_t)(Data->DataBlockSize |\ + Data->TransferDir |\ + Data->TransferMode |\ + Data->DPSM); + + /* Write to SDMMC DCTRL */ + MODIFY_REG(SDIOx->DCTRL, DCTRL_CLEAR_MASK, tmpreg); + + return HAL_OK; + +} + +/** + * @brief Returns number of remaining data bytes to be transferred. + * @param SDIOx Pointer to SDMMC register base + * @retval Number of remaining data bytes to be transferred + */ +uint32_t SDIO_GetDataCounter(SDIO_TypeDef *SDIOx) +{ + return (SDIOx->DCOUNT); +} + +/** + * @brief Get the FIFO data + * @param SDIOx Pointer to SDMMC register base + * @retval Data received + */ +uint32_t SDIO_GetFIFOCount(SDIO_TypeDef *SDIOx) +{ + return (SDIOx->FIFO); +} + +/** + * @brief Sets one of the two options of inserting read wait interval. + * @param SDIOx Pointer to SDMMC register base + * @param SDIO_ReadWaitMode SDMMC Read Wait operation mode. + * This parameter can be: + * @arg SDIO_READ_WAIT_MODE_CLK: Read Wait control by stopping SDMMCCLK + * @arg SDIO_READ_WAIT_MODE_DATA2: Read Wait control using SDMMC_DATA2 + * @retval None + */ +HAL_StatusTypeDef SDIO_SetSDMMCReadWaitMode(SDIO_TypeDef *SDIOx, uint32_t SDIO_ReadWaitMode) +{ + /* Check the parameters */ + assert_param(IS_SDIO_READWAIT_MODE(SDIO_ReadWaitMode)); + + /* Set SDMMC read wait mode */ + MODIFY_REG(SDIOx->DCTRL, SDIO_DCTRL_RWMOD, SDIO_ReadWaitMode); + + return HAL_OK; +} + +/** + * @} + */ + + +/** @defgroup HAL_SDMMC_LL_Group4 Command management functions + * @brief Data transfers functions + * +@verbatim + =============================================================================== + ##### Commands management functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to manage the needed commands. + +@endverbatim + * @{ + */ + +/** + * @brief Send the Data Block Lenght command and check the response + * @param SDIOx Pointer to SDMMC register base + * @retval HAL status + */ +uint32_t SDMMC_CmdBlockLength(SDIO_TypeDef *SDIOx, uint32_t BlockSize) +{ + SDIO_CmdInitTypeDef sdmmc_cmdinit; + uint32_t errorstate = SDMMC_ERROR_NONE; + + /* Set Block Size for Card */ + sdmmc_cmdinit.Argument = (uint32_t)BlockSize; + sdmmc_cmdinit.CmdIndex = SDMMC_CMD_SET_BLOCKLEN; + sdmmc_cmdinit.Response = SDIO_RESPONSE_SHORT; + sdmmc_cmdinit.WaitForInterrupt = SDIO_WAIT_NO; + sdmmc_cmdinit.CPSM = SDIO_CPSM_ENABLE; + SDIO_SendCommand(SDIOx, &sdmmc_cmdinit); + + /* Check for error conditions */ + errorstate = SDMMC_GetCmdResp1(SDIOx, SDMMC_CMD_SET_BLOCKLEN, SDIO_CMDTIMEOUT); + + return errorstate; +} + +/** + * @brief Send the Read Single Block command and check the response + * @param SDIOx Pointer to SDMMC register base + * @retval HAL status + */ +uint32_t SDMMC_CmdReadSingleBlock(SDIO_TypeDef *SDIOx, uint32_t ReadAdd) +{ + SDIO_CmdInitTypeDef sdmmc_cmdinit; + uint32_t errorstate = SDMMC_ERROR_NONE; + + /* Set Block Size for Card */ + sdmmc_cmdinit.Argument = (uint32_t)ReadAdd; + sdmmc_cmdinit.CmdIndex = SDMMC_CMD_READ_SINGLE_BLOCK; + sdmmc_cmdinit.Response = SDIO_RESPONSE_SHORT; + sdmmc_cmdinit.WaitForInterrupt = SDIO_WAIT_NO; + sdmmc_cmdinit.CPSM = SDIO_CPSM_ENABLE; + SDIO_SendCommand(SDIOx, &sdmmc_cmdinit); + + /* Check for error conditions */ + errorstate = SDMMC_GetCmdResp1(SDIOx, SDMMC_CMD_READ_SINGLE_BLOCK, SDIO_CMDTIMEOUT); + + return errorstate; +} + +/** + * @brief Send the Read Multi Block command and check the response + * @param SDIOx Pointer to SDIO register base + * @retval HAL status + */ +uint32_t SDMMC_CmdReadMultiBlock(SDIO_TypeDef *SDIOx, uint32_t ReadAdd) +{ + SDIO_CmdInitTypeDef sdmmc_cmdinit; + uint32_t errorstate = SDMMC_ERROR_NONE; + + /* Set Block Size for Card */ + sdmmc_cmdinit.Argument = (uint32_t)ReadAdd; + sdmmc_cmdinit.CmdIndex = SDMMC_CMD_READ_MULT_BLOCK; + sdmmc_cmdinit.Response = SDIO_RESPONSE_SHORT; + sdmmc_cmdinit.WaitForInterrupt = SDIO_WAIT_NO; + sdmmc_cmdinit.CPSM = SDIO_CPSM_ENABLE; + SDIO_SendCommand(SDIOx, &sdmmc_cmdinit); + + /* Check for error conditions */ + errorstate = SDMMC_GetCmdResp1(SDIOx, SDMMC_CMD_READ_MULT_BLOCK, SDIO_CMDTIMEOUT); + + return errorstate; +} + +/** + * @brief Send the Write Single Block command and check the response + * @param SDIOx Pointer to SDIO register base + * @retval HAL status + */ +uint32_t SDMMC_CmdWriteSingleBlock(SDIO_TypeDef *SDIOx, uint32_t WriteAdd) +{ + SDIO_CmdInitTypeDef sdmmc_cmdinit; + uint32_t errorstate = SDMMC_ERROR_NONE; + + /* Set Block Size for Card */ + sdmmc_cmdinit.Argument = (uint32_t)WriteAdd; + sdmmc_cmdinit.CmdIndex = SDMMC_CMD_WRITE_SINGLE_BLOCK; + sdmmc_cmdinit.Response = SDIO_RESPONSE_SHORT; + sdmmc_cmdinit.WaitForInterrupt = SDIO_WAIT_NO; + sdmmc_cmdinit.CPSM = SDIO_CPSM_ENABLE; + SDIO_SendCommand(SDIOx, &sdmmc_cmdinit); + + /* Check for error conditions */ + errorstate = SDMMC_GetCmdResp1(SDIOx, SDMMC_CMD_WRITE_SINGLE_BLOCK, SDIO_CMDTIMEOUT); + + return errorstate; +} + +/** + * @brief Send the Write Multi Block command and check the response + * @param SDIOx Pointer to SDIO register base + * @retval HAL status + */ +uint32_t SDMMC_CmdWriteMultiBlock(SDIO_TypeDef *SDIOx, uint32_t WriteAdd) +{ + SDIO_CmdInitTypeDef sdmmc_cmdinit; + uint32_t errorstate = SDMMC_ERROR_NONE; + + /* Set Block Size for Card */ + sdmmc_cmdinit.Argument = (uint32_t)WriteAdd; + sdmmc_cmdinit.CmdIndex = SDMMC_CMD_WRITE_MULT_BLOCK; + sdmmc_cmdinit.Response = SDIO_RESPONSE_SHORT; + sdmmc_cmdinit.WaitForInterrupt = SDIO_WAIT_NO; + sdmmc_cmdinit.CPSM = SDIO_CPSM_ENABLE; + SDIO_SendCommand(SDIOx, &sdmmc_cmdinit); + + /* Check for error conditions */ + errorstate = SDMMC_GetCmdResp1(SDIOx, SDMMC_CMD_WRITE_MULT_BLOCK, SDIO_CMDTIMEOUT); + + return errorstate; +} + +/** + * @brief Send the Start Address Erase command for SD and check the response + * @param SDIOx Pointer to SDIO register base + * @retval HAL status + */ +uint32_t SDMMC_CmdSDEraseStartAdd(SDIO_TypeDef *SDIOx, uint32_t StartAdd) +{ + SDIO_CmdInitTypeDef sdmmc_cmdinit; + uint32_t errorstate = SDMMC_ERROR_NONE; + + /* Set Block Size for Card */ + sdmmc_cmdinit.Argument = (uint32_t)StartAdd; + sdmmc_cmdinit.CmdIndex = SDMMC_CMD_SD_ERASE_GRP_START; + sdmmc_cmdinit.Response = SDIO_RESPONSE_SHORT; + sdmmc_cmdinit.WaitForInterrupt = SDIO_WAIT_NO; + sdmmc_cmdinit.CPSM = SDIO_CPSM_ENABLE; + SDIO_SendCommand(SDIOx, &sdmmc_cmdinit); + + /* Check for error conditions */ + errorstate = SDMMC_GetCmdResp1(SDIOx, SDMMC_CMD_SD_ERASE_GRP_START, SDIO_CMDTIMEOUT); + + return errorstate; +} + +/** + * @brief Send the End Address Erase command for SD and check the response + * @param SDIOx Pointer to SDIO register base + * @retval HAL status + */ +uint32_t SDMMC_CmdSDEraseEndAdd(SDIO_TypeDef *SDIOx, uint32_t EndAdd) +{ + SDIO_CmdInitTypeDef sdmmc_cmdinit; + uint32_t errorstate = SDMMC_ERROR_NONE; + + /* Set Block Size for Card */ + sdmmc_cmdinit.Argument = (uint32_t)EndAdd; + sdmmc_cmdinit.CmdIndex = SDMMC_CMD_SD_ERASE_GRP_END; + sdmmc_cmdinit.Response = SDIO_RESPONSE_SHORT; + sdmmc_cmdinit.WaitForInterrupt = SDIO_WAIT_NO; + sdmmc_cmdinit.CPSM = SDIO_CPSM_ENABLE; + SDIO_SendCommand(SDIOx, &sdmmc_cmdinit); + + /* Check for error conditions */ + errorstate = SDMMC_GetCmdResp1(SDIOx, SDMMC_CMD_SD_ERASE_GRP_END, SDIO_CMDTIMEOUT); + + return errorstate; +} + +/** + * @brief Send the Start Address Erase command and check the response + * @param SDIOx Pointer to SDIO register base + * @retval HAL status + */ +uint32_t SDMMC_CmdEraseStartAdd(SDIO_TypeDef *SDIOx, uint32_t StartAdd) +{ + SDIO_CmdInitTypeDef sdmmc_cmdinit; + uint32_t errorstate = SDMMC_ERROR_NONE; + + /* Set Block Size for Card */ + sdmmc_cmdinit.Argument = (uint32_t)StartAdd; + sdmmc_cmdinit.CmdIndex = SDMMC_CMD_ERASE_GRP_START; + sdmmc_cmdinit.Response = SDIO_RESPONSE_SHORT; + sdmmc_cmdinit.WaitForInterrupt = SDIO_WAIT_NO; + sdmmc_cmdinit.CPSM = SDIO_CPSM_ENABLE; + SDIO_SendCommand(SDIOx, &sdmmc_cmdinit); + + /* Check for error conditions */ + errorstate = SDMMC_GetCmdResp1(SDIOx, SDMMC_CMD_ERASE_GRP_START, SDIO_CMDTIMEOUT); + + return errorstate; +} + +/** + * @brief Send the End Address Erase command and check the response + * @param SDIOx Pointer to SDIO register base + * @retval HAL status + */ +uint32_t SDMMC_CmdEraseEndAdd(SDIO_TypeDef *SDIOx, uint32_t EndAdd) +{ + SDIO_CmdInitTypeDef sdmmc_cmdinit; + uint32_t errorstate = SDMMC_ERROR_NONE; + + /* Set Block Size for Card */ + sdmmc_cmdinit.Argument = (uint32_t)EndAdd; + sdmmc_cmdinit.CmdIndex = SDMMC_CMD_ERASE_GRP_END; + sdmmc_cmdinit.Response = SDIO_RESPONSE_SHORT; + sdmmc_cmdinit.WaitForInterrupt = SDIO_WAIT_NO; + sdmmc_cmdinit.CPSM = SDIO_CPSM_ENABLE; + SDIO_SendCommand(SDIOx, &sdmmc_cmdinit); + + /* Check for error conditions */ + errorstate = SDMMC_GetCmdResp1(SDIOx, SDMMC_CMD_ERASE_GRP_END, SDIO_CMDTIMEOUT); + + return errorstate; +} + +/** + * @brief Send the Erase command and check the response + * @param SDIOx Pointer to SDIO register base + * @retval HAL status + */ +uint32_t SDMMC_CmdErase(SDIO_TypeDef *SDIOx) +{ + SDIO_CmdInitTypeDef sdmmc_cmdinit; + uint32_t errorstate = SDMMC_ERROR_NONE; + + /* Set Block Size for Card */ + sdmmc_cmdinit.Argument = 0U; + sdmmc_cmdinit.CmdIndex = SDMMC_CMD_ERASE; + sdmmc_cmdinit.Response = SDIO_RESPONSE_SHORT; + sdmmc_cmdinit.WaitForInterrupt = SDIO_WAIT_NO; + sdmmc_cmdinit.CPSM = SDIO_CPSM_ENABLE; + SDIO_SendCommand(SDIOx, &sdmmc_cmdinit); + + /* Check for error conditions */ + errorstate = SDMMC_GetCmdResp1(SDIOx, SDMMC_CMD_ERASE, SDIO_MAXERASETIMEOUT); + + return errorstate; +} + +/** + * @brief Send the Stop Transfer command and check the response. + * @param SDIOx Pointer to SDIO register base + * @retval HAL status + */ +uint32_t SDMMC_CmdStopTransfer(SDIO_TypeDef *SDIOx) +{ + SDIO_CmdInitTypeDef sdmmc_cmdinit; + uint32_t errorstate = SDMMC_ERROR_NONE; + + /* Send CMD12 STOP_TRANSMISSION */ + sdmmc_cmdinit.Argument = 0U; + sdmmc_cmdinit.CmdIndex = SDMMC_CMD_STOP_TRANSMISSION; + sdmmc_cmdinit.Response = SDIO_RESPONSE_SHORT; + sdmmc_cmdinit.WaitForInterrupt = SDIO_WAIT_NO; + sdmmc_cmdinit.CPSM = SDIO_CPSM_ENABLE; + SDIO_SendCommand(SDIOx, &sdmmc_cmdinit); + + /* Check for error conditions */ + errorstate = SDMMC_GetCmdResp1(SDIOx, SDMMC_CMD_STOP_TRANSMISSION, 100000000U); + + return errorstate; +} + +/** + * @brief Send the Select Deselect command and check the response. + * @param SDIOx Pointer to SDIO register base + * @param addr Address of the card to be selected + * @retval HAL status + */ +uint32_t SDMMC_CmdSelDesel(SDIO_TypeDef *SDIOx, uint64_t Addr) +{ + SDIO_CmdInitTypeDef sdmmc_cmdinit; + uint32_t errorstate = SDMMC_ERROR_NONE; + + /* Send CMD7 SDMMC_SEL_DESEL_CARD */ + sdmmc_cmdinit.Argument = (uint32_t)Addr; + sdmmc_cmdinit.CmdIndex = SDMMC_CMD_SEL_DESEL_CARD; + sdmmc_cmdinit.Response = SDIO_RESPONSE_SHORT; + sdmmc_cmdinit.WaitForInterrupt = SDIO_WAIT_NO; + sdmmc_cmdinit.CPSM = SDIO_CPSM_ENABLE; + SDIO_SendCommand(SDIOx, &sdmmc_cmdinit); + + /* Check for error conditions */ + errorstate = SDMMC_GetCmdResp1(SDIOx, SDMMC_CMD_SEL_DESEL_CARD, SDIO_CMDTIMEOUT); + + return errorstate; +} + +/** + * @brief Send the Go Idle State command and check the response. + * @param SDIOx Pointer to SDIO register base + * @retval HAL status + */ +uint32_t SDMMC_CmdGoIdleState(SDIO_TypeDef *SDIOx) +{ + SDIO_CmdInitTypeDef sdmmc_cmdinit; + uint32_t errorstate = SDMMC_ERROR_NONE; + + sdmmc_cmdinit.Argument = 0U; + sdmmc_cmdinit.CmdIndex = SDMMC_CMD_GO_IDLE_STATE; + sdmmc_cmdinit.Response = SDIO_RESPONSE_NO; + sdmmc_cmdinit.WaitForInterrupt = SDIO_WAIT_NO; + sdmmc_cmdinit.CPSM = SDIO_CPSM_ENABLE; + SDIO_SendCommand(SDIOx, &sdmmc_cmdinit); + + /* Check for error conditions */ + errorstate = SDMMC_GetCmdError(SDIOx); + + return errorstate; +} + +/** + * @brief Send the Operating Condition command and check the response. + * @param SDIOx Pointer to SDIO register base + * @retval HAL status + */ +uint32_t SDMMC_CmdOperCond(SDIO_TypeDef *SDIOx) +{ + SDIO_CmdInitTypeDef sdmmc_cmdinit; + uint32_t errorstate = SDMMC_ERROR_NONE; + + /* Send CMD8 to verify SD card interface operating condition */ + /* Argument: - [31:12]: Reserved (shall be set to '0') + - [11:8]: Supply Voltage (VHS) 0x1 (Range: 2.7-3.6 V) + - [7:0]: Check Pattern (recommended 0xAA) */ + /* CMD Response: R7 */ + sdmmc_cmdinit.Argument = SDMMC_CHECK_PATTERN; + sdmmc_cmdinit.CmdIndex = SDMMC_CMD_HS_SEND_EXT_CSD; + sdmmc_cmdinit.Response = SDIO_RESPONSE_SHORT; + sdmmc_cmdinit.WaitForInterrupt = SDIO_WAIT_NO; + sdmmc_cmdinit.CPSM = SDIO_CPSM_ENABLE; + SDIO_SendCommand(SDIOx, &sdmmc_cmdinit); + + /* Check for error conditions */ + errorstate = SDMMC_GetCmdResp7(SDIOx); + + return errorstate; +} + +/** + * @brief Send the Application command to verify that that the next command + * is an application specific com-mand rather than a standard command + * and check the response. + * @param SDIOx Pointer to SDIO register base + * @retval HAL status + */ +uint32_t SDMMC_CmdAppCommand(SDIO_TypeDef *SDIOx, uint32_t Argument) +{ + SDIO_CmdInitTypeDef sdmmc_cmdinit; + uint32_t errorstate = SDMMC_ERROR_NONE; + + sdmmc_cmdinit.Argument = (uint32_t)Argument; + sdmmc_cmdinit.CmdIndex = SDMMC_CMD_APP_CMD; + sdmmc_cmdinit.Response = SDIO_RESPONSE_SHORT; + sdmmc_cmdinit.WaitForInterrupt = SDIO_WAIT_NO; + sdmmc_cmdinit.CPSM = SDIO_CPSM_ENABLE; + SDIO_SendCommand(SDIOx, &sdmmc_cmdinit); + + /* Check for error conditions */ + /* If there is a HAL_ERROR, it is a MMC card, else + it is a SD card: SD card 2.0 (voltage range mismatch) + or SD card 1.x */ + errorstate = SDMMC_GetCmdResp1(SDIOx, SDMMC_CMD_APP_CMD, SDIO_CMDTIMEOUT); + + return errorstate; +} + +/** + * @brief Send the command asking the accessed card to send its operating + * condition register (OCR) + * @param SDIOx Pointer to SDIO register base + * @retval HAL status + */ +uint32_t SDMMC_CmdAppOperCommand(SDIO_TypeDef *SDIOx, uint32_t SdType) +{ + SDIO_CmdInitTypeDef sdmmc_cmdinit; + uint32_t errorstate = SDMMC_ERROR_NONE; + + sdmmc_cmdinit.Argument = SDMMC_VOLTAGE_WINDOW_SD | SdType; + sdmmc_cmdinit.CmdIndex = SDMMC_CMD_SD_APP_OP_COND; + sdmmc_cmdinit.Response = SDIO_RESPONSE_SHORT; + sdmmc_cmdinit.WaitForInterrupt = SDIO_WAIT_NO; + sdmmc_cmdinit.CPSM = SDIO_CPSM_ENABLE; + SDIO_SendCommand(SDIOx, &sdmmc_cmdinit); + + /* Check for error conditions */ + errorstate = SDMMC_GetCmdResp3(SDIOx); + + return errorstate; +} + +/** + * @brief Send the Bus Width command and check the response. + * @param SDIOx Pointer to SDIO register base + * @retval HAL status + */ +uint32_t SDMMC_CmdBusWidth(SDIO_TypeDef *SDIOx, uint32_t BusWidth) +{ + SDIO_CmdInitTypeDef sdmmc_cmdinit; + uint32_t errorstate = SDMMC_ERROR_NONE; + + sdmmc_cmdinit.Argument = (uint32_t)BusWidth; + sdmmc_cmdinit.CmdIndex = SDMMC_CMD_APP_SD_SET_BUSWIDTH; + sdmmc_cmdinit.Response = SDIO_RESPONSE_SHORT; + sdmmc_cmdinit.WaitForInterrupt = SDIO_WAIT_NO; + sdmmc_cmdinit.CPSM = SDIO_CPSM_ENABLE; + SDIO_SendCommand(SDIOx, &sdmmc_cmdinit); + + /* Check for error conditions */ + errorstate = SDMMC_GetCmdResp1(SDIOx, SDMMC_CMD_APP_SD_SET_BUSWIDTH, SDIO_CMDTIMEOUT); + + return errorstate; +} + +/** + * @brief Send the Send SCR command and check the response. + * @param SDIOx Pointer to SDMMC register base + * @retval HAL status + */ +uint32_t SDMMC_CmdSendSCR(SDIO_TypeDef *SDIOx) +{ + SDIO_CmdInitTypeDef sdmmc_cmdinit; + uint32_t errorstate = SDMMC_ERROR_NONE; + + /* Send CMD51 SD_APP_SEND_SCR */ + sdmmc_cmdinit.Argument = 0U; + sdmmc_cmdinit.CmdIndex = SDMMC_CMD_SD_APP_SEND_SCR; + sdmmc_cmdinit.Response = SDIO_RESPONSE_SHORT; + sdmmc_cmdinit.WaitForInterrupt = SDIO_WAIT_NO; + sdmmc_cmdinit.CPSM = SDIO_CPSM_ENABLE; + SDIO_SendCommand(SDIOx, &sdmmc_cmdinit); + + /* Check for error conditions */ + errorstate = SDMMC_GetCmdResp1(SDIOx, SDMMC_CMD_SD_APP_SEND_SCR, SDIO_CMDTIMEOUT); + + return errorstate; +} + +/** + * @brief Send the Send CID command and check the response. + * @param SDIOx Pointer to SDIO register base + * @retval HAL status + */ +uint32_t SDMMC_CmdSendCID(SDIO_TypeDef *SDIOx) +{ + SDIO_CmdInitTypeDef sdmmc_cmdinit; + uint32_t errorstate = SDMMC_ERROR_NONE; + + /* Send CMD2 ALL_SEND_CID */ + sdmmc_cmdinit.Argument = 0U; + sdmmc_cmdinit.CmdIndex = SDMMC_CMD_ALL_SEND_CID; + sdmmc_cmdinit.Response = SDIO_RESPONSE_LONG; + sdmmc_cmdinit.WaitForInterrupt = SDIO_WAIT_NO; + sdmmc_cmdinit.CPSM = SDIO_CPSM_ENABLE; + SDIO_SendCommand(SDIOx, &sdmmc_cmdinit); + + /* Check for error conditions */ + errorstate = SDMMC_GetCmdResp2(SDIOx); + + return errorstate; +} + +/** + * @brief Send the Send CSD command and check the response. + * @param SDIOx Pointer to SDIO register base + * @retval HAL status + */ +uint32_t SDMMC_CmdSendCSD(SDIO_TypeDef *SDIOx, uint32_t Argument) +{ + SDIO_CmdInitTypeDef sdmmc_cmdinit; + uint32_t errorstate = SDMMC_ERROR_NONE; + + /* Send CMD9 SEND_CSD */ + sdmmc_cmdinit.Argument = (uint32_t)Argument; + sdmmc_cmdinit.CmdIndex = SDMMC_CMD_SEND_CSD; + sdmmc_cmdinit.Response = SDIO_RESPONSE_LONG; + sdmmc_cmdinit.WaitForInterrupt = SDIO_WAIT_NO; + sdmmc_cmdinit.CPSM = SDIO_CPSM_ENABLE; + SDIO_SendCommand(SDIOx, &sdmmc_cmdinit); + + /* Check for error conditions */ + errorstate = SDMMC_GetCmdResp2(SDIOx); + + return errorstate; +} + +/** + * @brief Send the Send CSD command and check the response. + * @param SDIOx Pointer to SDIO register base + * @retval HAL status + */ +uint32_t SDMMC_CmdSetRelAdd(SDIO_TypeDef *SDIOx, uint16_t *pRCA) +{ + SDIO_CmdInitTypeDef sdmmc_cmdinit; + uint32_t errorstate = SDMMC_ERROR_NONE; + + /* Send CMD3 SD_CMD_SET_REL_ADDR */ + sdmmc_cmdinit.Argument = 0U; + sdmmc_cmdinit.CmdIndex = SDMMC_CMD_SET_REL_ADDR; + sdmmc_cmdinit.Response = SDIO_RESPONSE_SHORT; + sdmmc_cmdinit.WaitForInterrupt = SDIO_WAIT_NO; + sdmmc_cmdinit.CPSM = SDIO_CPSM_ENABLE; + SDIO_SendCommand(SDIOx, &sdmmc_cmdinit); + + /* Check for error conditions */ + errorstate = SDMMC_GetCmdResp6(SDIOx, SDMMC_CMD_SET_REL_ADDR, pRCA); + + return errorstate; +} + +/** + * @brief Send the Status command and check the response. + * @param SDIOx Pointer to SDIO register base + * @retval HAL status + */ +uint32_t SDMMC_CmdSendStatus(SDIO_TypeDef *SDIOx, uint32_t Argument) +{ + SDIO_CmdInitTypeDef sdmmc_cmdinit; + uint32_t errorstate = SDMMC_ERROR_NONE; + + sdmmc_cmdinit.Argument = (uint32_t)Argument; + sdmmc_cmdinit.CmdIndex = SDMMC_CMD_SEND_STATUS; + sdmmc_cmdinit.Response = SDIO_RESPONSE_SHORT; + sdmmc_cmdinit.WaitForInterrupt = SDIO_WAIT_NO; + sdmmc_cmdinit.CPSM = SDIO_CPSM_ENABLE; + SDIO_SendCommand(SDIOx, &sdmmc_cmdinit); + + /* Check for error conditions */ + errorstate = SDMMC_GetCmdResp1(SDIOx, SDMMC_CMD_SEND_STATUS, SDIO_CMDTIMEOUT); + + return errorstate; +} + +/** + * @brief Send the Status register command and check the response. + * @param SDIOx Pointer to SDIO register base + * @retval HAL status + */ +uint32_t SDMMC_CmdStatusRegister(SDIO_TypeDef *SDIOx) +{ + SDIO_CmdInitTypeDef sdmmc_cmdinit; + uint32_t errorstate = SDMMC_ERROR_NONE; + + sdmmc_cmdinit.Argument = 0U; + sdmmc_cmdinit.CmdIndex = SDMMC_CMD_SD_APP_STATUS; + sdmmc_cmdinit.Response = SDIO_RESPONSE_SHORT; + sdmmc_cmdinit.WaitForInterrupt = SDIO_WAIT_NO; + sdmmc_cmdinit.CPSM = SDIO_CPSM_ENABLE; + SDIO_SendCommand(SDIOx, &sdmmc_cmdinit); + + /* Check for error conditions */ + errorstate = SDMMC_GetCmdResp1(SDIOx, SDMMC_CMD_SD_APP_STATUS, SDIO_CMDTIMEOUT); + + return errorstate; +} + +/** + * @brief Sends host capacity support information and activates the card's + * initialization process. Send SDMMC_CMD_SEND_OP_COND command + * @param SDIOx Pointer to SDIO register base + * @parame Argument Argument used for the command + * @retval HAL status + */ +uint32_t SDMMC_CmdOpCondition(SDIO_TypeDef *SDIOx, uint32_t Argument) +{ + SDIO_CmdInitTypeDef sdmmc_cmdinit; + uint32_t errorstate = SDMMC_ERROR_NONE; + + sdmmc_cmdinit.Argument = Argument; + sdmmc_cmdinit.CmdIndex = SDMMC_CMD_SEND_OP_COND; + sdmmc_cmdinit.Response = SDIO_RESPONSE_SHORT; + sdmmc_cmdinit.WaitForInterrupt = SDIO_WAIT_NO; + sdmmc_cmdinit.CPSM = SDIO_CPSM_ENABLE; + SDIO_SendCommand(SDIOx, &sdmmc_cmdinit); + + /* Check for error conditions */ + errorstate = SDMMC_GetCmdResp3(SDIOx); + + return errorstate; +} + +/** + * @brief Checks switchable function and switch card function. SDMMC_CMD_HS_SWITCH comand + * @param SDIOx Pointer to SDIO register base + * @parame Argument Argument used for the command + * @retval HAL status + */ +uint32_t SDMMC_CmdSwitch(SDIO_TypeDef *SDIOx, uint32_t Argument) +{ + SDIO_CmdInitTypeDef sdmmc_cmdinit; + uint32_t errorstate = SDMMC_ERROR_NONE; + + sdmmc_cmdinit.Argument = Argument; + sdmmc_cmdinit.CmdIndex = SDMMC_CMD_HS_SWITCH; + sdmmc_cmdinit.Response = SDIO_RESPONSE_SHORT; + sdmmc_cmdinit.WaitForInterrupt = SDIO_WAIT_NO; + sdmmc_cmdinit.CPSM = SDIO_CPSM_ENABLE; + SDIO_SendCommand(SDIOx, &sdmmc_cmdinit); + + /* Check for error conditions */ + errorstate = SDMMC_GetCmdResp1(SDIOx, SDMMC_CMD_HS_SWITCH, SDIO_CMDTIMEOUT); + + return errorstate; +} + +/** + * @} + */ + +/* Private function ----------------------------------------------------------*/ +/** @addtogroup SD_Private_Functions + * @{ + */ + +/** + * @brief Checks for error conditions for CMD0. + * @param hsd SD handle + * @retval SD Card error state + */ +static uint32_t SDMMC_GetCmdError(SDIO_TypeDef *SDIOx) +{ + /* 8 is the number of required instructions cycles for the below loop statement. + The SDMMC_CMDTIMEOUT is expressed in ms */ + register uint32_t count = SDIO_CMDTIMEOUT * (SystemCoreClock / 8U /1000U); + + do + { + if (count-- == 0U) + { + return SDMMC_ERROR_TIMEOUT; + } + + }while(!__SDIO_GET_FLAG(SDIOx, SDIO_FLAG_CMDSENT)); + + /* Clear all the static flags */ + __SDIO_CLEAR_FLAG(SDIOx, SDIO_STATIC_FLAGS); + + return SDMMC_ERROR_NONE; +} + +/** + * @brief Checks for error conditions for R1 response. + * @param hsd SD handle + * @param SD_CMD The sent command index + * @retval SD Card error state + */ +static uint32_t SDMMC_GetCmdResp1(SDIO_TypeDef *SDIOx, uint8_t SD_CMD, uint32_t Timeout) +{ + uint32_t response_r1; + + /* 8 is the number of required instructions cycles for the below loop statement. + The Timeout is expressed in ms */ + register uint32_t count = Timeout * (SystemCoreClock / 8U /1000U); + + do + { + if (count-- == 0U) + { + return SDMMC_ERROR_TIMEOUT; + } + + }while(!__SDIO_GET_FLAG(SDIOx, SDIO_FLAG_CCRCFAIL | SDIO_FLAG_CMDREND | SDIO_FLAG_CTIMEOUT)); + + if(__SDIO_GET_FLAG(SDIOx, SDIO_FLAG_CTIMEOUT)) + { + __SDIO_CLEAR_FLAG(SDIOx, SDIO_FLAG_CTIMEOUT); + + return SDMMC_ERROR_CMD_RSP_TIMEOUT; + } + else if(__SDIO_GET_FLAG(SDIOx, SDIO_FLAG_CCRCFAIL)) + { + __SDIO_CLEAR_FLAG(SDIOx, SDIO_FLAG_CCRCFAIL); + + return SDMMC_ERROR_CMD_CRC_FAIL; + } + + /* Check response received is of desired command */ + if(SDIO_GetCommandResponse(SDIOx) != SD_CMD) + { + return SDMMC_ERROR_CMD_CRC_FAIL; + } + + /* Clear all the static flags */ + __SDIO_CLEAR_FLAG(SDIOx, SDIO_STATIC_FLAGS); + + /* We have received response, retrieve it for analysis */ + response_r1 = SDIO_GetResponse(SDIOx, SDIO_RESP1); + + if((response_r1 & SDMMC_OCR_ERRORBITS) == SDMMC_ALLZERO) + { + return SDMMC_ERROR_NONE; + } + else if((response_r1 & SDMMC_OCR_ADDR_OUT_OF_RANGE) == SDMMC_OCR_ADDR_OUT_OF_RANGE) + { + return SDMMC_ERROR_ADDR_OUT_OF_RANGE; + } + else if((response_r1 & SDMMC_OCR_ADDR_MISALIGNED) == SDMMC_OCR_ADDR_MISALIGNED) + { + return SDMMC_ERROR_ADDR_MISALIGNED; + } + else if((response_r1 & SDMMC_OCR_BLOCK_LEN_ERR) == SDMMC_OCR_BLOCK_LEN_ERR) + { + return SDMMC_ERROR_BLOCK_LEN_ERR; + } + else if((response_r1 & SDMMC_OCR_ERASE_SEQ_ERR) == SDMMC_OCR_ERASE_SEQ_ERR) + { + return SDMMC_ERROR_ERASE_SEQ_ERR; + } + else if((response_r1 & SDMMC_OCR_BAD_ERASE_PARAM) == SDMMC_OCR_BAD_ERASE_PARAM) + { + return SDMMC_ERROR_BAD_ERASE_PARAM; + } + else if((response_r1 & SDMMC_OCR_WRITE_PROT_VIOLATION) == SDMMC_OCR_WRITE_PROT_VIOLATION) + { + return SDMMC_ERROR_WRITE_PROT_VIOLATION; + } + else if((response_r1 & SDMMC_OCR_LOCK_UNLOCK_FAILED) == SDMMC_OCR_LOCK_UNLOCK_FAILED) + { + return SDMMC_ERROR_LOCK_UNLOCK_FAILED; + } + else if((response_r1 & SDMMC_OCR_COM_CRC_FAILED) == SDMMC_OCR_COM_CRC_FAILED) + { + return SDMMC_ERROR_COM_CRC_FAILED; + } + else if((response_r1 & SDMMC_OCR_ILLEGAL_CMD) == SDMMC_OCR_ILLEGAL_CMD) + { + return SDMMC_ERROR_ILLEGAL_CMD; + } + else if((response_r1 & SDMMC_OCR_CARD_ECC_FAILED) == SDMMC_OCR_CARD_ECC_FAILED) + { + return SDMMC_ERROR_CARD_ECC_FAILED; + } + else if((response_r1 & SDMMC_OCR_CC_ERROR) == SDMMC_OCR_CC_ERROR) + { + return SDMMC_ERROR_CC_ERR; + } + else if((response_r1 & SDMMC_OCR_STREAM_READ_UNDERRUN) == SDMMC_OCR_STREAM_READ_UNDERRUN) + { + return SDMMC_ERROR_STREAM_READ_UNDERRUN; + } + else if((response_r1 & SDMMC_OCR_STREAM_WRITE_OVERRUN) == SDMMC_OCR_STREAM_WRITE_OVERRUN) + { + return SDMMC_ERROR_STREAM_WRITE_OVERRUN; + } + else if((response_r1 & SDMMC_OCR_CID_CSD_OVERWRITE) == SDMMC_OCR_CID_CSD_OVERWRITE) + { + return SDMMC_ERROR_CID_CSD_OVERWRITE; + } + else if((response_r1 & SDMMC_OCR_WP_ERASE_SKIP) == SDMMC_OCR_WP_ERASE_SKIP) + { + return SDMMC_ERROR_WP_ERASE_SKIP; + } + else if((response_r1 & SDMMC_OCR_CARD_ECC_DISABLED) == SDMMC_OCR_CARD_ECC_DISABLED) + { + return SDMMC_ERROR_CARD_ECC_DISABLED; + } + else if((response_r1 & SDMMC_OCR_ERASE_RESET) == SDMMC_OCR_ERASE_RESET) + { + return SDMMC_ERROR_ERASE_RESET; + } + else if((response_r1 & SDMMC_OCR_AKE_SEQ_ERROR) == SDMMC_OCR_AKE_SEQ_ERROR) + { + return SDMMC_ERROR_AKE_SEQ_ERR; + } + else + { + return SDMMC_ERROR_GENERAL_UNKNOWN_ERR; + } +} + +/** + * @brief Checks for error conditions for R2 (CID or CSD) response. + * @param hsd SD handle + * @retval SD Card error state + */ +static uint32_t SDMMC_GetCmdResp2(SDIO_TypeDef *SDIOx) +{ + /* 8 is the number of required instructions cycles for the below loop statement. + The SDMMC_CMDTIMEOUT is expressed in ms */ + register uint32_t count = SDIO_CMDTIMEOUT * (SystemCoreClock / 8U /1000U); + + do + { + if (count-- == 0U) + { + return SDMMC_ERROR_TIMEOUT; + } + + }while(!__SDIO_GET_FLAG(SDIOx, SDIO_FLAG_CCRCFAIL | SDIO_FLAG_CMDREND | SDIO_FLAG_CTIMEOUT)); + + if (__SDIO_GET_FLAG(SDIOx, SDIO_FLAG_CTIMEOUT)) + { + __SDIO_CLEAR_FLAG(SDIOx, SDIO_FLAG_CTIMEOUT); + + return SDMMC_ERROR_CMD_RSP_TIMEOUT; + } + else if (__SDIO_GET_FLAG(SDIOx, SDIO_FLAG_CCRCFAIL)) + { + __SDIO_CLEAR_FLAG(SDIOx, SDIO_FLAG_CCRCFAIL); + + return SDMMC_ERROR_CMD_CRC_FAIL; + } + else + { + /* No error flag set */ + /* Clear all the static flags */ + __SDIO_CLEAR_FLAG(SDIOx, SDIO_STATIC_FLAGS); + } + + return SDMMC_ERROR_NONE; +} + +/** + * @brief Checks for error conditions for R3 (OCR) response. + * @param hsd SD handle + * @retval SD Card error state + */ +static uint32_t SDMMC_GetCmdResp3(SDIO_TypeDef *SDIOx) +{ + /* 8 is the number of required instructions cycles for the below loop statement. + The SDMMC_CMDTIMEOUT is expressed in ms */ + register uint32_t count = SDIO_CMDTIMEOUT * (SystemCoreClock / 8U /1000U); + + do + { + if (count-- == 0U) + { + return SDMMC_ERROR_TIMEOUT; + } + + }while(!__SDIO_GET_FLAG(SDIOx, SDIO_FLAG_CCRCFAIL | SDIO_FLAG_CMDREND | SDIO_FLAG_CTIMEOUT)); + + if(__SDIO_GET_FLAG(SDIOx, SDIO_FLAG_CTIMEOUT)) + { + __SDIO_CLEAR_FLAG(SDIOx, SDIO_FLAG_CTIMEOUT); + + return SDMMC_ERROR_CMD_RSP_TIMEOUT; + } + else + + { + /* Clear all the static flags */ + __SDIO_CLEAR_FLAG(SDIOx, SDIO_STATIC_FLAGS); + } + + return SDMMC_ERROR_NONE; +} + +/** + * @brief Checks for error conditions for R6 (RCA) response. + * @param hsd SD handle + * @param SD_CMD The sent command index + * @param pRCA Pointer to the variable that will contain the SD card relative + * address RCA + * @retval SD Card error state + */ +static uint32_t SDMMC_GetCmdResp6(SDIO_TypeDef *SDIOx, uint8_t SD_CMD, uint16_t *pRCA) +{ + uint32_t response_r1; + + /* 8 is the number of required instructions cycles for the below loop statement. + The SDMMC_CMDTIMEOUT is expressed in ms */ + register uint32_t count = SDIO_CMDTIMEOUT * (SystemCoreClock / 8U /1000U); + + do + { + if (count-- == 0U) + { + return SDMMC_ERROR_TIMEOUT; + } + + }while(!__SDIO_GET_FLAG(SDIOx, SDIO_FLAG_CCRCFAIL | SDIO_FLAG_CMDREND | SDIO_FLAG_CTIMEOUT)); + + if(__SDIO_GET_FLAG(SDIOx, SDIO_FLAG_CTIMEOUT)) + { + __SDIO_CLEAR_FLAG(SDIOx, SDIO_FLAG_CTIMEOUT); + + return SDMMC_ERROR_CMD_RSP_TIMEOUT; + } + else if(__SDIO_GET_FLAG(SDIOx, SDIO_FLAG_CCRCFAIL)) + { + __SDIO_CLEAR_FLAG(SDIOx, SDIO_FLAG_CCRCFAIL); + + return SDMMC_ERROR_CMD_CRC_FAIL; + } + + /* Check response received is of desired command */ + if(SDIO_GetCommandResponse(SDIOx) != SD_CMD) + { + return SDMMC_ERROR_CMD_CRC_FAIL; + } + + /* Clear all the static flags */ + __SDIO_CLEAR_FLAG(SDIOx, SDIO_STATIC_FLAGS); + + /* We have received response, retrieve it. */ + response_r1 = SDIO_GetResponse(SDIOx, SDIO_RESP1); + + if((response_r1 & (SDMMC_R6_GENERAL_UNKNOWN_ERROR | SDMMC_R6_ILLEGAL_CMD | SDMMC_R6_COM_CRC_FAILED)) == SDMMC_ALLZERO) + { + *pRCA = (uint16_t) (response_r1 >> 16); + + return SDMMC_ERROR_NONE; + } + else if((response_r1 & SDMMC_R6_ILLEGAL_CMD) == SDMMC_R6_ILLEGAL_CMD) + { + return SDMMC_ERROR_ILLEGAL_CMD; + } + else if((response_r1 & SDMMC_R6_COM_CRC_FAILED) == SDMMC_R6_COM_CRC_FAILED) + { + return SDMMC_ERROR_COM_CRC_FAILED; + } + else + { + return SDMMC_ERROR_GENERAL_UNKNOWN_ERR; + } +} + +/** + * @brief Checks for error conditions for R7 response. + * @param hsd SD handle + * @retval SD Card error state + */ +static uint32_t SDMMC_GetCmdResp7(SDIO_TypeDef *SDIOx) +{ + /* 8 is the number of required instructions cycles for the below loop statement. + The SDIO_CMDTIMEOUT is expressed in ms */ + register uint32_t count = SDIO_CMDTIMEOUT * (SystemCoreClock / 8U /1000U); + + do + { + if (count-- == 0U) + { + return SDMMC_ERROR_TIMEOUT; + } + + }while(!__SDIO_GET_FLAG(SDIOx, SDIO_FLAG_CCRCFAIL | SDIO_FLAG_CMDREND | SDIO_FLAG_CTIMEOUT)); + + if(__SDIO_GET_FLAG(SDIOx, SDIO_FLAG_CTIMEOUT)) + { + /* Card is SD V2.0 compliant */ + __SDIO_CLEAR_FLAG(SDIOx, SDIO_FLAG_CMDREND); + + return SDMMC_ERROR_CMD_RSP_TIMEOUT; + } + + if(__SDIO_GET_FLAG(SDIOx, SDIO_FLAG_CMDREND)) + { + /* Card is SD V2.0 compliant */ + __SDIO_CLEAR_FLAG(SDIOx, SDIO_FLAG_CMDREND); + } + + return SDMMC_ERROR_NONE; + +} + +/** + * @} + */ + +/** + * @} + */ + +#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || + STM32F401xC || STM32F401xE || STM32F411xE || STM32F446xx || STM32F469xx || STM32F479xx || STM32F412Zx || STM32F412Vx || + STM32F412Rx || STM32F412Cx || STM32F413xx || STM32F423xx */ +#endif /* (HAL_SD_MODULE_ENABLED) || (HAL_MMC_MODULE_ENABLED) */ + +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_usb.c b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_usb.c new file mode 100644 index 0000000..32f8304 --- /dev/null +++ b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_usb.c @@ -0,0 +1,2032 @@ +/** + ****************************************************************************** + * @file stm32f4xx_ll_usb.c + * @author MCD Application Team + * @brief USB Low Layer HAL module driver. + * + * This file provides firmware functions to manage the following + * functionalities of the USB Peripheral Controller: + * + Initialization/de-initialization functions + * + I/O operation functions + * + Peripheral Control functions + * + Peripheral State functions + * + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] + (#) Fill parameters of Init structure in USB_OTG_CfgTypeDef structure. + + (#) Call USB_CoreInit() API to initialize the USB Core peripheral. + + (#) The upper HAL HCD/PCD driver will call the right routines for its internal processes. + + @endverbatim + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f4xx_hal.h" + +/** @addtogroup STM32F4xx_LL_USB_DRIVER + * @{ + */ + +#if defined (HAL_PCD_MODULE_ENABLED) || defined (HAL_HCD_MODULE_ENABLED) +#if defined (USB_OTG_FS) || defined (USB_OTG_HS) +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Private functions ---------------------------------------------------------*/ +#if defined (USB_OTG_FS) || defined (USB_OTG_HS) +static HAL_StatusTypeDef USB_CoreReset(USB_OTG_GlobalTypeDef *USBx); + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup USB_LL_Exported_Functions USB Low Layer Exported Functions + * @{ + */ + +/** @defgroup USB_LL_Exported_Functions_Group1 Initialization/de-initialization functions + * @brief Initialization and Configuration functions + * +@verbatim + =============================================================================== + ##### Initialization/de-initialization functions ##### + =============================================================================== + +@endverbatim + * @{ + */ + +/** + * @brief Initializes the USB Core + * @param USBx USB Instance + * @param cfg pointer to a USB_OTG_CfgTypeDef structure that contains + * the configuration information for the specified USBx peripheral. + * @retval HAL status + */ +HAL_StatusTypeDef USB_CoreInit(USB_OTG_GlobalTypeDef *USBx, USB_OTG_CfgTypeDef cfg) +{ + HAL_StatusTypeDef ret; + + if (cfg.phy_itface == USB_OTG_ULPI_PHY) + { + USBx->GCCFG &= ~(USB_OTG_GCCFG_PWRDWN); + + /* Init The ULPI Interface */ + USBx->GUSBCFG &= ~(USB_OTG_GUSBCFG_TSDPS | USB_OTG_GUSBCFG_ULPIFSLS | USB_OTG_GUSBCFG_PHYSEL); + + /* Select vbus source */ + USBx->GUSBCFG &= ~(USB_OTG_GUSBCFG_ULPIEVBUSD | USB_OTG_GUSBCFG_ULPIEVBUSI); + if (cfg.use_external_vbus == 1U) + { + USBx->GUSBCFG |= USB_OTG_GUSBCFG_ULPIEVBUSD; + } + /* Reset after a PHY select */ + ret = USB_CoreReset(USBx); + } + else /* FS interface (embedded Phy) */ + { + /* Select FS Embedded PHY */ + USBx->GUSBCFG |= USB_OTG_GUSBCFG_PHYSEL; + + /* Reset after a PHY select and set Host mode */ + ret = USB_CoreReset(USBx); + + if (cfg.battery_charging_enable == 0U) + { + /* Activate the USB Transceiver */ + USBx->GCCFG |= USB_OTG_GCCFG_PWRDWN; + } + else + { + /* Deactivate the USB Transceiver */ + USBx->GCCFG &= ~(USB_OTG_GCCFG_PWRDWN); + } + } + + if (cfg.dma_enable == 1U) + { + USBx->GAHBCFG |= USB_OTG_GAHBCFG_HBSTLEN_2; + USBx->GAHBCFG |= USB_OTG_GAHBCFG_DMAEN; + } + + return ret; +} + + +/** + * @brief Set the USB turnaround time + * @param USBx USB Instance + * @param hclk: AHB clock frequency + * @retval USB turnaround time In PHY Clocks number + */ +HAL_StatusTypeDef USB_SetTurnaroundTime(USB_OTG_GlobalTypeDef *USBx, + uint32_t hclk, uint8_t speed) +{ + uint32_t UsbTrd; + + /* The USBTRD is configured according to the tables below, depending on AHB frequency + used by application. In the low AHB frequency range it is used to stretch enough the USB response + time to IN tokens, the USB turnaround time, so to compensate for the longer AHB read access + latency to the Data FIFO */ + if (speed == USBD_FS_SPEED) + { + if ((hclk >= 14200000U) && (hclk < 15000000U)) + { + /* hclk Clock Range between 14.2-15 MHz */ + UsbTrd = 0xFU; + } + else if ((hclk >= 15000000U) && (hclk < 16000000U)) + { + /* hclk Clock Range between 15-16 MHz */ + UsbTrd = 0xEU; + } + else if ((hclk >= 16000000U) && (hclk < 17200000U)) + { + /* hclk Clock Range between 16-17.2 MHz */ + UsbTrd = 0xDU; + } + else if ((hclk >= 17200000U) && (hclk < 18500000U)) + { + /* hclk Clock Range between 17.2-18.5 MHz */ + UsbTrd = 0xCU; + } + else if ((hclk >= 18500000U) && (hclk < 20000000U)) + { + /* hclk Clock Range between 18.5-20 MHz */ + UsbTrd = 0xBU; + } + else if ((hclk >= 20000000U) && (hclk < 21800000U)) + { + /* hclk Clock Range between 20-21.8 MHz */ + UsbTrd = 0xAU; + } + else if ((hclk >= 21800000U) && (hclk < 24000000U)) + { + /* hclk Clock Range between 21.8-24 MHz */ + UsbTrd = 0x9U; + } + else if ((hclk >= 24000000U) && (hclk < 27700000U)) + { + /* hclk Clock Range between 24-27.7 MHz */ + UsbTrd = 0x8U; + } + else if ((hclk >= 27700000U) && (hclk < 32000000U)) + { + /* hclk Clock Range between 27.7-32 MHz */ + UsbTrd = 0x7U; + } + else /* if(hclk >= 32000000) */ + { + /* hclk Clock Range between 32-200 MHz */ + UsbTrd = 0x6U; + } + } + else if (speed == USBD_HS_SPEED) + { + UsbTrd = USBD_HS_TRDT_VALUE; + } + else + { + UsbTrd = USBD_DEFAULT_TRDT_VALUE; + } + + USBx->GUSBCFG &= ~USB_OTG_GUSBCFG_TRDT; + USBx->GUSBCFG |= (uint32_t)((UsbTrd << 10) & USB_OTG_GUSBCFG_TRDT); + + return HAL_OK; +} + +/** + * @brief USB_EnableGlobalInt + * Enables the controller's Global Int in the AHB Config reg + * @param USBx Selected device + * @retval HAL status + */ +HAL_StatusTypeDef USB_EnableGlobalInt(USB_OTG_GlobalTypeDef *USBx) +{ + USBx->GAHBCFG |= USB_OTG_GAHBCFG_GINT; + return HAL_OK; +} + +/** + * @brief USB_DisableGlobalInt + * Disable the controller's Global Int in the AHB Config reg + * @param USBx Selected device + * @retval HAL status +*/ +HAL_StatusTypeDef USB_DisableGlobalInt(USB_OTG_GlobalTypeDef *USBx) +{ + USBx->GAHBCFG &= ~USB_OTG_GAHBCFG_GINT; + return HAL_OK; +} + +/** + * @brief USB_SetCurrentMode : Set functional mode + * @param USBx Selected device + * @param mode current core mode + * This parameter can be one of these values: + * @arg USB_DEVICE_MODE: Peripheral mode + * @arg USB_HOST_MODE: Host mode + * @arg USB_DRD_MODE: Dual Role Device mode + * @retval HAL status + */ +HAL_StatusTypeDef USB_SetCurrentMode(USB_OTG_GlobalTypeDef *USBx, USB_OTG_ModeTypeDef mode) +{ + USBx->GUSBCFG &= ~(USB_OTG_GUSBCFG_FHMOD | USB_OTG_GUSBCFG_FDMOD); + + if (mode == USB_HOST_MODE) + { + USBx->GUSBCFG |= USB_OTG_GUSBCFG_FHMOD; + } + else if (mode == USB_DEVICE_MODE) + { + USBx->GUSBCFG |= USB_OTG_GUSBCFG_FDMOD; + } + else + { + return HAL_ERROR; + } + HAL_Delay(50U); + + return HAL_OK; +} + +/** + * @brief USB_DevInit : Initializes the USB_OTG controller registers + * for device mode + * @param USBx Selected device + * @param cfg pointer to a USB_OTG_CfgTypeDef structure that contains + * the configuration information for the specified USBx peripheral. + * @retval HAL status + */ +HAL_StatusTypeDef USB_DevInit(USB_OTG_GlobalTypeDef *USBx, USB_OTG_CfgTypeDef cfg) +{ + HAL_StatusTypeDef ret = HAL_OK; + uint32_t USBx_BASE = (uint32_t)USBx; + uint32_t i; + + for (i = 0U; i < 15U; i++) + { + USBx->DIEPTXF[i] = 0U; + } + +#if defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx) + /* VBUS Sensing setup */ + if (cfg.vbus_sensing_enable == 0U) + { + /* Deactivate VBUS Sensing B */ + USBx->GCCFG &= ~USB_OTG_GCCFG_VBDEN; + + /* B-peripheral session valid override enable */ + USBx->GOTGCTL |= USB_OTG_GOTGCTL_BVALOEN; + USBx->GOTGCTL |= USB_OTG_GOTGCTL_BVALOVAL; + } + else + { + /* Enable HW VBUS sensing */ + USBx->GCCFG |= USB_OTG_GCCFG_VBDEN; + } +#else + /* VBUS Sensing setup */ + if (cfg.vbus_sensing_enable == 0U) + { + /* + * Disable HW VBUS sensing. VBUS is internally considered to be always + * at VBUS-Valid level (5V). + */ + USBx->GCCFG |= USB_OTG_GCCFG_NOVBUSSENS; + USBx->GCCFG &= ~USB_OTG_GCCFG_VBUSBSEN; + USBx->GCCFG &= ~USB_OTG_GCCFG_VBUSASEN; + } + else + { + /* Enable HW VBUS sensing */ + USBx->GOTGCTL &= ~USB_OTG_GCCFG_NOVBUSSENS; + USBx->GCCFG |= USB_OTG_GCCFG_VBUSBSEN; + } +#endif /* defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx) */ + + /* Restart the Phy Clock */ + USBx_PCGCCTL = 0U; + + /* Device mode configuration */ + USBx_DEVICE->DCFG |= DCFG_FRAME_INTERVAL_80; + + if (cfg.phy_itface == USB_OTG_ULPI_PHY) + { + if (cfg.speed == USBD_HS_SPEED) + { + /* Set Core speed to High speed mode */ + (void)USB_SetDevSpeed(USBx, USB_OTG_SPEED_HIGH); + } + else + { + /* Set Core speed to Full speed mode */ + (void)USB_SetDevSpeed(USBx, USB_OTG_SPEED_HIGH_IN_FULL); + } + } + else + { + /* Set Core speed to Full speed mode */ + (void)USB_SetDevSpeed(USBx, USB_OTG_SPEED_FULL); + } + + /* Flush the FIFOs */ + if (USB_FlushTxFifo(USBx, 0x10U) != HAL_OK) /* all Tx FIFOs */ + { + ret = HAL_ERROR; + } + + if (USB_FlushRxFifo(USBx) != HAL_OK) + { + ret = HAL_ERROR; + } + + /* Clear all pending Device Interrupts */ + USBx_DEVICE->DIEPMSK = 0U; + USBx_DEVICE->DOEPMSK = 0U; + USBx_DEVICE->DAINTMSK = 0U; + + for (i = 0U; i < cfg.dev_endpoints; i++) + { + if ((USBx_INEP(i)->DIEPCTL & USB_OTG_DIEPCTL_EPENA) == USB_OTG_DIEPCTL_EPENA) + { + if (i == 0U) + { + USBx_INEP(i)->DIEPCTL = USB_OTG_DIEPCTL_SNAK; + } + else + { + USBx_INEP(i)->DIEPCTL = USB_OTG_DIEPCTL_EPDIS | USB_OTG_DIEPCTL_SNAK; + } + } + else + { + USBx_INEP(i)->DIEPCTL = 0U; + } + + USBx_INEP(i)->DIEPTSIZ = 0U; + USBx_INEP(i)->DIEPINT = 0xFB7FU; + } + + for (i = 0U; i < cfg.dev_endpoints; i++) + { + if ((USBx_OUTEP(i)->DOEPCTL & USB_OTG_DOEPCTL_EPENA) == USB_OTG_DOEPCTL_EPENA) + { + if (i == 0U) + { + USBx_OUTEP(i)->DOEPCTL = USB_OTG_DOEPCTL_SNAK; + } + else + { + USBx_OUTEP(i)->DOEPCTL = USB_OTG_DOEPCTL_EPDIS | USB_OTG_DOEPCTL_SNAK; + } + } + else + { + USBx_OUTEP(i)->DOEPCTL = 0U; + } + + USBx_OUTEP(i)->DOEPTSIZ = 0U; + USBx_OUTEP(i)->DOEPINT = 0xFB7FU; + } + + USBx_DEVICE->DIEPMSK &= ~(USB_OTG_DIEPMSK_TXFURM); + + if (cfg.dma_enable == 1U) + { + /*Set threshold parameters */ + USBx_DEVICE->DTHRCTL = USB_OTG_DTHRCTL_TXTHRLEN_6 | + USB_OTG_DTHRCTL_RXTHRLEN_6; + + USBx_DEVICE->DTHRCTL |= USB_OTG_DTHRCTL_RXTHREN | + USB_OTG_DTHRCTL_ISOTHREN | + USB_OTG_DTHRCTL_NONISOTHREN; + } + + /* Disable all interrupts. */ + USBx->GINTMSK = 0U; + + /* Clear any pending interrupts */ + USBx->GINTSTS = 0xBFFFFFFFU; + + /* Enable the common interrupts */ + if (cfg.dma_enable == 0U) + { + USBx->GINTMSK |= USB_OTG_GINTMSK_RXFLVLM; + } + + /* Enable interrupts matching to the Device mode ONLY */ + USBx->GINTMSK |= USB_OTG_GINTMSK_USBSUSPM | USB_OTG_GINTMSK_USBRST | + USB_OTG_GINTMSK_ENUMDNEM | USB_OTG_GINTMSK_IEPINT | + USB_OTG_GINTMSK_OEPINT | USB_OTG_GINTMSK_IISOIXFRM | + USB_OTG_GINTMSK_PXFRM_IISOOXFRM | USB_OTG_GINTMSK_WUIM; + + if (cfg.Sof_enable != 0U) + { + USBx->GINTMSK |= USB_OTG_GINTMSK_SOFM; + } + + if (cfg.vbus_sensing_enable == 1U) + { + USBx->GINTMSK |= (USB_OTG_GINTMSK_SRQIM | USB_OTG_GINTMSK_OTGINT); + } + + return ret; +} + +/** + * @brief USB_OTG_FlushTxFifo : Flush a Tx FIFO + * @param USBx Selected device + * @param num FIFO number + * This parameter can be a value from 1 to 15 + 15 means Flush all Tx FIFOs + * @retval HAL status + */ +HAL_StatusTypeDef USB_FlushTxFifo(USB_OTG_GlobalTypeDef *USBx, uint32_t num) +{ + uint32_t count = 0U; + + USBx->GRSTCTL = (USB_OTG_GRSTCTL_TXFFLSH | (num << 6)); + + do + { + if (++count > 200000U) + { + return HAL_TIMEOUT; + } + } + while ((USBx->GRSTCTL & USB_OTG_GRSTCTL_TXFFLSH) == USB_OTG_GRSTCTL_TXFFLSH); + + return HAL_OK; +} + +/** + * @brief USB_FlushRxFifo : Flush Rx FIFO + * @param USBx Selected device + * @retval HAL status + */ +HAL_StatusTypeDef USB_FlushRxFifo(USB_OTG_GlobalTypeDef *USBx) +{ + uint32_t count = 0; + + USBx->GRSTCTL = USB_OTG_GRSTCTL_RXFFLSH; + + do + { + if (++count > 200000U) + { + return HAL_TIMEOUT; + } + } + while ((USBx->GRSTCTL & USB_OTG_GRSTCTL_RXFFLSH) == USB_OTG_GRSTCTL_RXFFLSH); + + return HAL_OK; +} + +/** + * @brief USB_SetDevSpeed Initializes the DevSpd field of DCFG register + * depending the PHY type and the enumeration speed of the device. + * @param USBx Selected device + * @param speed device speed + * This parameter can be one of these values: + * @arg USB_OTG_SPEED_HIGH: High speed mode + * @arg USB_OTG_SPEED_HIGH_IN_FULL: High speed core in Full Speed mode + * @arg USB_OTG_SPEED_FULL: Full speed mode + * @retval Hal status + */ +HAL_StatusTypeDef USB_SetDevSpeed(USB_OTG_GlobalTypeDef *USBx, uint8_t speed) +{ + uint32_t USBx_BASE = (uint32_t)USBx; + + USBx_DEVICE->DCFG |= speed; + return HAL_OK; +} + +/** + * @brief USB_GetDevSpeed Return the Dev Speed + * @param USBx Selected device + * @retval speed device speed + * This parameter can be one of these values: + * @arg PCD_SPEED_HIGH: High speed mode + * @arg PCD_SPEED_FULL: Full speed mode + */ +uint8_t USB_GetDevSpeed(USB_OTG_GlobalTypeDef *USBx) +{ + uint32_t USBx_BASE = (uint32_t)USBx; + uint8_t speed; + uint32_t DevEnumSpeed = USBx_DEVICE->DSTS & USB_OTG_DSTS_ENUMSPD; + + if (DevEnumSpeed == DSTS_ENUMSPD_HS_PHY_30MHZ_OR_60MHZ) + { + speed = USBD_HS_SPEED; + } + else if ((DevEnumSpeed == DSTS_ENUMSPD_FS_PHY_30MHZ_OR_60MHZ) || + (DevEnumSpeed == DSTS_ENUMSPD_FS_PHY_48MHZ)) + { + speed = USBD_FS_SPEED; + } + else + { + speed = 0xFU; + } + + return speed; +} + +/** + * @brief Activate and configure an endpoint + * @param USBx Selected device + * @param ep pointer to endpoint structure + * @retval HAL status + */ +HAL_StatusTypeDef USB_ActivateEndpoint(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep) +{ + uint32_t USBx_BASE = (uint32_t)USBx; + uint32_t epnum = (uint32_t)ep->num; + + if (ep->is_in == 1U) + { + USBx_DEVICE->DAINTMSK |= USB_OTG_DAINTMSK_IEPM & (uint32_t)(1UL << (ep->num & EP_ADDR_MSK)); + + if ((USBx_INEP(epnum)->DIEPCTL & USB_OTG_DIEPCTL_USBAEP) == 0U) + { + USBx_INEP(epnum)->DIEPCTL |= (ep->maxpacket & USB_OTG_DIEPCTL_MPSIZ) | + ((uint32_t)ep->type << 18) | (epnum << 22) | + USB_OTG_DIEPCTL_SD0PID_SEVNFRM | + USB_OTG_DIEPCTL_USBAEP; + } + } + else + { + USBx_DEVICE->DAINTMSK |= USB_OTG_DAINTMSK_OEPM & ((uint32_t)(1UL << (ep->num & EP_ADDR_MSK)) << 16); + + if (((USBx_OUTEP(epnum)->DOEPCTL) & USB_OTG_DOEPCTL_USBAEP) == 0U) + { + USBx_OUTEP(epnum)->DOEPCTL |= (ep->maxpacket & USB_OTG_DOEPCTL_MPSIZ) | + ((uint32_t)ep->type << 18) | + USB_OTG_DIEPCTL_SD0PID_SEVNFRM | + USB_OTG_DOEPCTL_USBAEP; + } + } + return HAL_OK; +} + +/** + * @brief Activate and configure a dedicated endpoint + * @param USBx Selected device + * @param ep pointer to endpoint structure + * @retval HAL status + */ +HAL_StatusTypeDef USB_ActivateDedicatedEndpoint(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep) +{ + uint32_t USBx_BASE = (uint32_t)USBx; + uint32_t epnum = (uint32_t)ep->num; + + /* Read DEPCTLn register */ + if (ep->is_in == 1U) + { + if (((USBx_INEP(epnum)->DIEPCTL) & USB_OTG_DIEPCTL_USBAEP) == 0U) + { + USBx_INEP(epnum)->DIEPCTL |= (ep->maxpacket & USB_OTG_DIEPCTL_MPSIZ) | + ((uint32_t)ep->type << 18) | (epnum << 22) | + USB_OTG_DIEPCTL_SD0PID_SEVNFRM | + USB_OTG_DIEPCTL_USBAEP; + } + + USBx_DEVICE->DEACHMSK |= USB_OTG_DAINTMSK_IEPM & (uint32_t)(1UL << (ep->num & EP_ADDR_MSK)); + } + else + { + if (((USBx_OUTEP(epnum)->DOEPCTL) & USB_OTG_DOEPCTL_USBAEP) == 0U) + { + USBx_OUTEP(epnum)->DOEPCTL |= (ep->maxpacket & USB_OTG_DOEPCTL_MPSIZ) | + ((uint32_t)ep->type << 18) | (epnum << 22) | + USB_OTG_DOEPCTL_USBAEP; + } + + USBx_DEVICE->DEACHMSK |= USB_OTG_DAINTMSK_OEPM & ((uint32_t)(1UL << (ep->num & EP_ADDR_MSK)) << 16); + } + + return HAL_OK; +} + +/** + * @brief De-activate and de-initialize an endpoint + * @param USBx Selected device + * @param ep pointer to endpoint structure + * @retval HAL status + */ +HAL_StatusTypeDef USB_DeactivateEndpoint(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep) +{ + uint32_t USBx_BASE = (uint32_t)USBx; + uint32_t epnum = (uint32_t)ep->num; + + /* Read DEPCTLn register */ + if (ep->is_in == 1U) + { + USBx_DEVICE->DEACHMSK &= ~(USB_OTG_DAINTMSK_IEPM & (uint32_t)(1UL << (ep->num & EP_ADDR_MSK))); + USBx_DEVICE->DAINTMSK &= ~(USB_OTG_DAINTMSK_IEPM & (uint32_t)(1UL << (ep->num & EP_ADDR_MSK))); + USBx_INEP(epnum)->DIEPCTL &= ~(USB_OTG_DIEPCTL_USBAEP | + USB_OTG_DIEPCTL_MPSIZ | + USB_OTG_DIEPCTL_TXFNUM | + USB_OTG_DIEPCTL_SD0PID_SEVNFRM | + USB_OTG_DIEPCTL_EPTYP); + } + else + { + USBx_DEVICE->DEACHMSK &= ~(USB_OTG_DAINTMSK_OEPM & ((uint32_t)(1UL << (ep->num & EP_ADDR_MSK)) << 16)); + USBx_DEVICE->DAINTMSK &= ~(USB_OTG_DAINTMSK_OEPM & ((uint32_t)(1UL << (ep->num & EP_ADDR_MSK)) << 16)); + USBx_OUTEP(epnum)->DOEPCTL &= ~(USB_OTG_DOEPCTL_USBAEP | + USB_OTG_DOEPCTL_MPSIZ | + USB_OTG_DOEPCTL_SD0PID_SEVNFRM | + USB_OTG_DOEPCTL_EPTYP); + } + + return HAL_OK; +} + +/** + * @brief De-activate and de-initialize a dedicated endpoint + * @param USBx Selected device + * @param ep pointer to endpoint structure + * @retval HAL status + */ +HAL_StatusTypeDef USB_DeactivateDedicatedEndpoint(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep) +{ + uint32_t USBx_BASE = (uint32_t)USBx; + uint32_t epnum = (uint32_t)ep->num; + + /* Read DEPCTLn register */ + if (ep->is_in == 1U) + { + USBx_INEP(epnum)->DIEPCTL &= ~ USB_OTG_DIEPCTL_USBAEP; + USBx_DEVICE->DAINTMSK &= ~(USB_OTG_DAINTMSK_IEPM & (uint32_t)(1UL << (ep->num & EP_ADDR_MSK))); + } + else + { + USBx_OUTEP(epnum)->DOEPCTL &= ~USB_OTG_DOEPCTL_USBAEP; + USBx_DEVICE->DAINTMSK &= ~(USB_OTG_DAINTMSK_OEPM & ((uint32_t)(1UL << (ep->num & EP_ADDR_MSK)) << 16)); + } + + return HAL_OK; +} + +/** + * @brief USB_EPStartXfer : setup and starts a transfer over an EP + * @param USBx Selected device + * @param ep pointer to endpoint structure + * @param dma USB dma enabled or disabled + * This parameter can be one of these values: + * 0 : DMA feature not used + * 1 : DMA feature used + * @retval HAL status + */ +HAL_StatusTypeDef USB_EPStartXfer(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep, uint8_t dma) +{ + uint32_t USBx_BASE = (uint32_t)USBx; + uint32_t epnum = (uint32_t)ep->num; + uint16_t pktcnt; + + /* IN endpoint */ + if (ep->is_in == 1U) + { + /* Zero Length Packet? */ + if (ep->xfer_len == 0U) + { + USBx_INEP(epnum)->DIEPTSIZ &= ~(USB_OTG_DIEPTSIZ_PKTCNT); + USBx_INEP(epnum)->DIEPTSIZ |= (USB_OTG_DIEPTSIZ_PKTCNT & (1U << 19)); + USBx_INEP(epnum)->DIEPTSIZ &= ~(USB_OTG_DIEPTSIZ_XFRSIZ); + } + else + { + /* Program the transfer size and packet count + * as follows: xfersize = N * maxpacket + + * short_packet pktcnt = N + (short_packet + * exist ? 1 : 0) + */ + USBx_INEP(epnum)->DIEPTSIZ &= ~(USB_OTG_DIEPTSIZ_XFRSIZ); + USBx_INEP(epnum)->DIEPTSIZ &= ~(USB_OTG_DIEPTSIZ_PKTCNT); + USBx_INEP(epnum)->DIEPTSIZ |= (USB_OTG_DIEPTSIZ_PKTCNT & (((ep->xfer_len + ep->maxpacket - 1U) / ep->maxpacket) << 19)); + USBx_INEP(epnum)->DIEPTSIZ |= (USB_OTG_DIEPTSIZ_XFRSIZ & ep->xfer_len); + + if (ep->type == EP_TYPE_ISOC) + { + USBx_INEP(epnum)->DIEPTSIZ &= ~(USB_OTG_DIEPTSIZ_MULCNT); + USBx_INEP(epnum)->DIEPTSIZ |= (USB_OTG_DIEPTSIZ_MULCNT & (1U << 29)); + } + } + + if (dma == 1U) + { + if ((uint32_t)ep->dma_addr != 0U) + { + USBx_INEP(epnum)->DIEPDMA = (uint32_t)(ep->dma_addr); + } + + if (ep->type == EP_TYPE_ISOC) + { + if ((USBx_DEVICE->DSTS & (1U << 8)) == 0U) + { + USBx_INEP(epnum)->DIEPCTL |= USB_OTG_DIEPCTL_SODDFRM; + } + else + { + USBx_INEP(epnum)->DIEPCTL |= USB_OTG_DIEPCTL_SD0PID_SEVNFRM; + } + } + + /* EP enable, IN data in FIFO */ + USBx_INEP(epnum)->DIEPCTL |= (USB_OTG_DIEPCTL_CNAK | USB_OTG_DIEPCTL_EPENA); + } + else + { + /* EP enable, IN data in FIFO */ + USBx_INEP(epnum)->DIEPCTL |= (USB_OTG_DIEPCTL_CNAK | USB_OTG_DIEPCTL_EPENA); + + if (ep->type != EP_TYPE_ISOC) + { + /* Enable the Tx FIFO Empty Interrupt for this EP */ + if (ep->xfer_len > 0U) + { + USBx_DEVICE->DIEPEMPMSK |= 1UL << (ep->num & EP_ADDR_MSK); + } + } + else + { + if ((USBx_DEVICE->DSTS & (1U << 8)) == 0U) + { + USBx_INEP(epnum)->DIEPCTL |= USB_OTG_DIEPCTL_SODDFRM; + } + else + { + USBx_INEP(epnum)->DIEPCTL |= USB_OTG_DIEPCTL_SD0PID_SEVNFRM; + } + + (void)USB_WritePacket(USBx, ep->xfer_buff, ep->num, (uint16_t)ep->xfer_len, dma); + } + } + } + else /* OUT endpoint */ + { + /* Program the transfer size and packet count as follows: + * pktcnt = N + * xfersize = N * maxpacket + */ + USBx_OUTEP(epnum)->DOEPTSIZ &= ~(USB_OTG_DOEPTSIZ_XFRSIZ); + USBx_OUTEP(epnum)->DOEPTSIZ &= ~(USB_OTG_DOEPTSIZ_PKTCNT); + + if (ep->xfer_len == 0U) + { + USBx_OUTEP(epnum)->DOEPTSIZ |= (USB_OTG_DOEPTSIZ_XFRSIZ & ep->maxpacket); + USBx_OUTEP(epnum)->DOEPTSIZ |= (USB_OTG_DOEPTSIZ_PKTCNT & (1U << 19)); + } + else + { + pktcnt = (uint16_t)((ep->xfer_len + ep->maxpacket - 1U) / ep->maxpacket); + USBx_OUTEP(epnum)->DOEPTSIZ |= USB_OTG_DOEPTSIZ_PKTCNT & ((uint32_t)pktcnt << 19); + USBx_OUTEP(epnum)->DOEPTSIZ |= USB_OTG_DOEPTSIZ_XFRSIZ & (ep->maxpacket * pktcnt); + } + + if (dma == 1U) + { + if ((uint32_t)ep->xfer_buff != 0U) + { + USBx_OUTEP(epnum)->DOEPDMA = (uint32_t)(ep->xfer_buff); + } + } + + if (ep->type == EP_TYPE_ISOC) + { + if ((USBx_DEVICE->DSTS & (1U << 8)) == 0U) + { + USBx_OUTEP(epnum)->DOEPCTL |= USB_OTG_DOEPCTL_SODDFRM; + } + else + { + USBx_OUTEP(epnum)->DOEPCTL |= USB_OTG_DOEPCTL_SD0PID_SEVNFRM; + } + } + /* EP enable */ + USBx_OUTEP(epnum)->DOEPCTL |= (USB_OTG_DOEPCTL_CNAK | USB_OTG_DOEPCTL_EPENA); + } + + return HAL_OK; +} + +/** + * @brief USB_EP0StartXfer : setup and starts a transfer over the EP 0 + * @param USBx Selected device + * @param ep pointer to endpoint structure + * @param dma USB dma enabled or disabled + * This parameter can be one of these values: + * 0 : DMA feature not used + * 1 : DMA feature used + * @retval HAL status + */ +HAL_StatusTypeDef USB_EP0StartXfer(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep, uint8_t dma) +{ + uint32_t USBx_BASE = (uint32_t)USBx; + uint32_t epnum = (uint32_t)ep->num; + + /* IN endpoint */ + if (ep->is_in == 1U) + { + /* Zero Length Packet? */ + if (ep->xfer_len == 0U) + { + USBx_INEP(epnum)->DIEPTSIZ &= ~(USB_OTG_DIEPTSIZ_PKTCNT); + USBx_INEP(epnum)->DIEPTSIZ |= (USB_OTG_DIEPTSIZ_PKTCNT & (1U << 19)); + USBx_INEP(epnum)->DIEPTSIZ &= ~(USB_OTG_DIEPTSIZ_XFRSIZ); + } + else + { + /* Program the transfer size and packet count + * as follows: xfersize = N * maxpacket + + * short_packet pktcnt = N + (short_packet + * exist ? 1 : 0) + */ + USBx_INEP(epnum)->DIEPTSIZ &= ~(USB_OTG_DIEPTSIZ_XFRSIZ); + USBx_INEP(epnum)->DIEPTSIZ &= ~(USB_OTG_DIEPTSIZ_PKTCNT); + + if (ep->xfer_len > ep->maxpacket) + { + ep->xfer_len = ep->maxpacket; + } + USBx_INEP(epnum)->DIEPTSIZ |= (USB_OTG_DIEPTSIZ_PKTCNT & (1U << 19)); + USBx_INEP(epnum)->DIEPTSIZ |= (USB_OTG_DIEPTSIZ_XFRSIZ & ep->xfer_len); + } + + if (dma == 1U) + { + if ((uint32_t)ep->dma_addr != 0U) + { + USBx_INEP(epnum)->DIEPDMA = (uint32_t)(ep->dma_addr); + } + + /* EP enable, IN data in FIFO */ + USBx_INEP(epnum)->DIEPCTL |= (USB_OTG_DIEPCTL_CNAK | USB_OTG_DIEPCTL_EPENA); + } + else + { + /* EP enable, IN data in FIFO */ + USBx_INEP(epnum)->DIEPCTL |= (USB_OTG_DIEPCTL_CNAK | USB_OTG_DIEPCTL_EPENA); + + /* Enable the Tx FIFO Empty Interrupt for this EP */ + if (ep->xfer_len > 0U) + { + USBx_DEVICE->DIEPEMPMSK |= 1UL << (ep->num & EP_ADDR_MSK); + } + } + } + else /* OUT endpoint */ + { + /* Program the transfer size and packet count as follows: + * pktcnt = N + * xfersize = N * maxpacket + */ + USBx_OUTEP(epnum)->DOEPTSIZ &= ~(USB_OTG_DOEPTSIZ_XFRSIZ); + USBx_OUTEP(epnum)->DOEPTSIZ &= ~(USB_OTG_DOEPTSIZ_PKTCNT); + + if (ep->xfer_len > 0U) + { + ep->xfer_len = ep->maxpacket; + } + + USBx_OUTEP(epnum)->DOEPTSIZ |= (USB_OTG_DOEPTSIZ_PKTCNT & (1U << 19)); + USBx_OUTEP(epnum)->DOEPTSIZ |= (USB_OTG_DOEPTSIZ_XFRSIZ & (ep->maxpacket)); + + if (dma == 1U) + { + if ((uint32_t)ep->xfer_buff != 0U) + { + USBx_OUTEP(epnum)->DOEPDMA = (uint32_t)(ep->xfer_buff); + } + } + + /* EP enable */ + USBx_OUTEP(epnum)->DOEPCTL |= (USB_OTG_DOEPCTL_CNAK | USB_OTG_DOEPCTL_EPENA); + } + + return HAL_OK; +} + +/** + * @brief USB_WritePacket : Writes a packet into the Tx FIFO associated + * with the EP/channel + * @param USBx Selected device + * @param src pointer to source buffer + * @param ch_ep_num endpoint or host channel number + * @param len Number of bytes to write + * @param dma USB dma enabled or disabled + * This parameter can be one of these values: + * 0 : DMA feature not used + * 1 : DMA feature used + * @retval HAL status + */ +HAL_StatusTypeDef USB_WritePacket(USB_OTG_GlobalTypeDef *USBx, uint8_t *src, uint8_t ch_ep_num, uint16_t len, uint8_t dma) +{ + uint32_t USBx_BASE = (uint32_t)USBx; + uint32_t *pSrc = (uint32_t *)src; + uint32_t count32b, i; + + if (dma == 0U) + { + count32b = ((uint32_t)len + 3U) / 4U; + for (i = 0U; i < count32b; i++) + { + USBx_DFIFO((uint32_t)ch_ep_num) = __UNALIGNED_UINT32_READ(pSrc); + pSrc++; + } + } + + return HAL_OK; +} + +/** + * @brief USB_ReadPacket : read a packet from the RX FIFO + * @param USBx Selected device + * @param dest source pointer + * @param len Number of bytes to read + * @retval pointer to destination buffer + */ +void *USB_ReadPacket(USB_OTG_GlobalTypeDef *USBx, uint8_t *dest, uint16_t len) +{ + uint32_t USBx_BASE = (uint32_t)USBx; + uint32_t *pDest = (uint32_t *)dest; + uint32_t i; + uint32_t count32b = ((uint32_t)len + 3U) / 4U; + + for (i = 0U; i < count32b; i++) + { + __UNALIGNED_UINT32_WRITE(pDest, USBx_DFIFO(0U)); + pDest++; + } + + return ((void *)pDest); +} + +/** + * @brief USB_EPSetStall : set a stall condition over an EP + * @param USBx Selected device + * @param ep pointer to endpoint structure + * @retval HAL status + */ +HAL_StatusTypeDef USB_EPSetStall(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep) +{ + uint32_t USBx_BASE = (uint32_t)USBx; + uint32_t epnum = (uint32_t)ep->num; + + if (ep->is_in == 1U) + { + if (((USBx_INEP(epnum)->DIEPCTL & USB_OTG_DIEPCTL_EPENA) == 0U) && (epnum != 0U)) + { + USBx_INEP(epnum)->DIEPCTL &= ~(USB_OTG_DIEPCTL_EPDIS); + } + USBx_INEP(epnum)->DIEPCTL |= USB_OTG_DIEPCTL_STALL; + } + else + { + if (((USBx_OUTEP(epnum)->DOEPCTL & USB_OTG_DOEPCTL_EPENA) == 0U) && (epnum != 0U)) + { + USBx_OUTEP(epnum)->DOEPCTL &= ~(USB_OTG_DOEPCTL_EPDIS); + } + USBx_OUTEP(epnum)->DOEPCTL |= USB_OTG_DOEPCTL_STALL; + } + + return HAL_OK; +} + +/** + * @brief USB_EPClearStall : Clear a stall condition over an EP + * @param USBx Selected device + * @param ep pointer to endpoint structure + * @retval HAL status + */ +HAL_StatusTypeDef USB_EPClearStall(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep) +{ + uint32_t USBx_BASE = (uint32_t)USBx; + uint32_t epnum = (uint32_t)ep->num; + + if (ep->is_in == 1U) + { + USBx_INEP(epnum)->DIEPCTL &= ~USB_OTG_DIEPCTL_STALL; + if ((ep->type == EP_TYPE_INTR) || (ep->type == EP_TYPE_BULK)) + { + USBx_INEP(epnum)->DIEPCTL |= USB_OTG_DIEPCTL_SD0PID_SEVNFRM; /* DATA0 */ + } + } + else + { + USBx_OUTEP(epnum)->DOEPCTL &= ~USB_OTG_DOEPCTL_STALL; + if ((ep->type == EP_TYPE_INTR) || (ep->type == EP_TYPE_BULK)) + { + USBx_OUTEP(epnum)->DOEPCTL |= USB_OTG_DOEPCTL_SD0PID_SEVNFRM; /* DATA0 */ + } + } + return HAL_OK; +} + +/** + * @brief USB_StopDevice : Stop the usb device mode + * @param USBx Selected device + * @retval HAL status + */ +HAL_StatusTypeDef USB_StopDevice(USB_OTG_GlobalTypeDef *USBx) +{ + HAL_StatusTypeDef ret; + uint32_t USBx_BASE = (uint32_t)USBx; + uint32_t i; + + /* Clear Pending interrupt */ + for (i = 0U; i < 15U; i++) + { + USBx_INEP(i)->DIEPINT = 0xFB7FU; + USBx_OUTEP(i)->DOEPINT = 0xFB7FU; + } + + /* Clear interrupt masks */ + USBx_DEVICE->DIEPMSK = 0U; + USBx_DEVICE->DOEPMSK = 0U; + USBx_DEVICE->DAINTMSK = 0U; + + /* Flush the FIFO */ + ret = USB_FlushRxFifo(USBx); + if (ret != HAL_OK) + { + return ret; + } + + ret = USB_FlushTxFifo(USBx, 0x10U); + if (ret != HAL_OK) + { + return ret; + } + + return ret; +} + +/** + * @brief USB_SetDevAddress : Stop the usb device mode + * @param USBx Selected device + * @param address new device address to be assigned + * This parameter can be a value from 0 to 255 + * @retval HAL status + */ +HAL_StatusTypeDef USB_SetDevAddress(USB_OTG_GlobalTypeDef *USBx, uint8_t address) +{ + uint32_t USBx_BASE = (uint32_t)USBx; + + USBx_DEVICE->DCFG &= ~(USB_OTG_DCFG_DAD); + USBx_DEVICE->DCFG |= ((uint32_t)address << 4) & USB_OTG_DCFG_DAD; + + return HAL_OK; +} + +/** + * @brief USB_DevConnect : Connect the USB device by enabling the pull-up/pull-down + * @param USBx Selected device + * @retval HAL status + */ +HAL_StatusTypeDef USB_DevConnect(USB_OTG_GlobalTypeDef *USBx) +{ + uint32_t USBx_BASE = (uint32_t)USBx; + + USBx_DEVICE->DCTL &= ~USB_OTG_DCTL_SDIS; + HAL_Delay(3U); + + return HAL_OK; +} + +/** + * @brief USB_DevDisconnect : Disconnect the USB device by disabling the pull-up/pull-down + * @param USBx Selected device + * @retval HAL status + */ +HAL_StatusTypeDef USB_DevDisconnect(USB_OTG_GlobalTypeDef *USBx) +{ + uint32_t USBx_BASE = (uint32_t)USBx; + + USBx_DEVICE->DCTL |= USB_OTG_DCTL_SDIS; + HAL_Delay(3U); + + return HAL_OK; +} + +/** + * @brief USB_ReadInterrupts: return the global USB interrupt status + * @param USBx Selected device + * @retval HAL status + */ +uint32_t USB_ReadInterrupts(USB_OTG_GlobalTypeDef *USBx) +{ + uint32_t tmpreg; + + tmpreg = USBx->GINTSTS; + tmpreg &= USBx->GINTMSK; + + return tmpreg; +} + +/** + * @brief USB_ReadDevAllOutEpInterrupt: return the USB device OUT endpoints interrupt status + * @param USBx Selected device + * @retval HAL status + */ +uint32_t USB_ReadDevAllOutEpInterrupt(USB_OTG_GlobalTypeDef *USBx) +{ + uint32_t USBx_BASE = (uint32_t)USBx; + uint32_t tmpreg; + + tmpreg = USBx_DEVICE->DAINT; + tmpreg &= USBx_DEVICE->DAINTMSK; + + return ((tmpreg & 0xffff0000U) >> 16); +} + +/** + * @brief USB_ReadDevAllInEpInterrupt: return the USB device IN endpoints interrupt status + * @param USBx Selected device + * @retval HAL status + */ +uint32_t USB_ReadDevAllInEpInterrupt(USB_OTG_GlobalTypeDef *USBx) +{ + uint32_t USBx_BASE = (uint32_t)USBx; + uint32_t tmpreg; + + tmpreg = USBx_DEVICE->DAINT; + tmpreg &= USBx_DEVICE->DAINTMSK; + + return ((tmpreg & 0xFFFFU)); +} + +/** + * @brief Returns Device OUT EP Interrupt register + * @param USBx Selected device + * @param epnum endpoint number + * This parameter can be a value from 0 to 15 + * @retval Device OUT EP Interrupt register + */ +uint32_t USB_ReadDevOutEPInterrupt(USB_OTG_GlobalTypeDef *USBx, uint8_t epnum) +{ + uint32_t USBx_BASE = (uint32_t)USBx; + uint32_t tmpreg; + + tmpreg = USBx_OUTEP((uint32_t)epnum)->DOEPINT; + tmpreg &= USBx_DEVICE->DOEPMSK; + + return tmpreg; +} + +/** + * @brief Returns Device IN EP Interrupt register + * @param USBx Selected device + * @param epnum endpoint number + * This parameter can be a value from 0 to 15 + * @retval Device IN EP Interrupt register + */ +uint32_t USB_ReadDevInEPInterrupt(USB_OTG_GlobalTypeDef *USBx, uint8_t epnum) +{ + uint32_t USBx_BASE = (uint32_t)USBx; + uint32_t tmpreg, msk, emp; + + msk = USBx_DEVICE->DIEPMSK; + emp = USBx_DEVICE->DIEPEMPMSK; + msk |= ((emp >> (epnum & EP_ADDR_MSK)) & 0x1U) << 7; + tmpreg = USBx_INEP((uint32_t)epnum)->DIEPINT & msk; + + return tmpreg; +} + +/** + * @brief USB_ClearInterrupts: clear a USB interrupt + * @param USBx Selected device + * @param interrupt interrupt flag + * @retval None + */ +void USB_ClearInterrupts(USB_OTG_GlobalTypeDef *USBx, uint32_t interrupt) +{ + USBx->GINTSTS |= interrupt; +} + +/** + * @brief Returns USB core mode + * @param USBx Selected device + * @retval return core mode : Host or Device + * This parameter can be one of these values: + * 0 : Host + * 1 : Device + */ +uint32_t USB_GetMode(USB_OTG_GlobalTypeDef *USBx) +{ + return ((USBx->GINTSTS) & 0x1U); +} + +/** + * @brief Activate EP0 for Setup transactions + * @param USBx Selected device + * @retval HAL status + */ +HAL_StatusTypeDef USB_ActivateSetup(USB_OTG_GlobalTypeDef *USBx) +{ + uint32_t USBx_BASE = (uint32_t)USBx; + + /* Set the MPS of the IN EP based on the enumeration speed */ + USBx_INEP(0U)->DIEPCTL &= ~USB_OTG_DIEPCTL_MPSIZ; + + if ((USBx_DEVICE->DSTS & USB_OTG_DSTS_ENUMSPD) == DSTS_ENUMSPD_LS_PHY_6MHZ) + { + USBx_INEP(0U)->DIEPCTL |= 3U; + } + USBx_DEVICE->DCTL |= USB_OTG_DCTL_CGINAK; + + return HAL_OK; +} + +/** + * @brief Prepare the EP0 to start the first control setup + * @param USBx Selected device + * @param dma USB dma enabled or disabled + * This parameter can be one of these values: + * 0 : DMA feature not used + * 1 : DMA feature used + * @param psetup pointer to setup packet + * @retval HAL status + */ +HAL_StatusTypeDef USB_EP0_OutStart(USB_OTG_GlobalTypeDef *USBx, uint8_t dma, uint8_t *psetup) +{ + uint32_t USBx_BASE = (uint32_t)USBx; + uint32_t gSNPSiD = *(__IO uint32_t *)(&USBx->CID + 0x1U); + + if (gSNPSiD > USB_OTG_CORE_ID_300A) + { + if ((USBx_OUTEP(0U)->DOEPCTL & USB_OTG_DOEPCTL_EPENA) == USB_OTG_DOEPCTL_EPENA) + { + return HAL_OK; + } + } + + USBx_OUTEP(0U)->DOEPTSIZ = 0U; + USBx_OUTEP(0U)->DOEPTSIZ |= (USB_OTG_DOEPTSIZ_PKTCNT & (1U << 19)); + USBx_OUTEP(0U)->DOEPTSIZ |= (3U * 8U); + USBx_OUTEP(0U)->DOEPTSIZ |= USB_OTG_DOEPTSIZ_STUPCNT; + + if (dma == 1U) + { + USBx_OUTEP(0U)->DOEPDMA = (uint32_t)psetup; + /* EP enable */ + USBx_OUTEP(0U)->DOEPCTL |= USB_OTG_DOEPCTL_EPENA | USB_OTG_DOEPCTL_USBAEP; + } + + return HAL_OK; +} + +/** + * @brief Reset the USB Core (needed after USB clock settings change) + * @param USBx Selected device + * @retval HAL status + */ +static HAL_StatusTypeDef USB_CoreReset(USB_OTG_GlobalTypeDef *USBx) +{ + uint32_t count = 0U; + + /* Wait for AHB master IDLE state. */ + do + { + if (++count > 200000U) + { + return HAL_TIMEOUT; + } + } + while ((USBx->GRSTCTL & USB_OTG_GRSTCTL_AHBIDL) == 0U); + + /* Core Soft Reset */ + count = 0U; + USBx->GRSTCTL |= USB_OTG_GRSTCTL_CSRST; + + do + { + if (++count > 200000U) + { + return HAL_TIMEOUT; + } + } + while ((USBx->GRSTCTL & USB_OTG_GRSTCTL_CSRST) == USB_OTG_GRSTCTL_CSRST); + + return HAL_OK; +} + +/** + * @brief USB_HostInit : Initializes the USB OTG controller registers + * for Host mode + * @param USBx Selected device + * @param cfg pointer to a USB_OTG_CfgTypeDef structure that contains + * the configuration information for the specified USBx peripheral. + * @retval HAL status + */ +HAL_StatusTypeDef USB_HostInit(USB_OTG_GlobalTypeDef *USBx, USB_OTG_CfgTypeDef cfg) +{ + uint32_t USBx_BASE = (uint32_t)USBx; + uint32_t i; + + /* Restart the Phy Clock */ + USBx_PCGCCTL = 0U; + +#if defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx) + /* Disable HW VBUS sensing */ + USBx->GCCFG &= ~(USB_OTG_GCCFG_VBDEN); +#else + /* + * Disable HW VBUS sensing. VBUS is internally considered to be always + * at VBUS-Valid level (5V). + */ + USBx->GCCFG |= USB_OTG_GCCFG_NOVBUSSENS; + USBx->GCCFG &= ~USB_OTG_GCCFG_VBUSBSEN; + USBx->GCCFG &= ~USB_OTG_GCCFG_VBUSASEN; +#endif /* defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx) */ +#if defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx) + /* Disable Battery chargin detector */ + USBx->GCCFG &= ~(USB_OTG_GCCFG_BCDEN); +#endif /* defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx) */ + + if ((USBx->CID & (0x1U << 8)) != 0U) + { + if (cfg.speed == USB_OTG_SPEED_FULL) + { + /* Force Device Enumeration to FS/LS mode only */ + USBx_HOST->HCFG |= USB_OTG_HCFG_FSLSS; + } + else + { + /* Set default Max speed support */ + USBx_HOST->HCFG &= ~(USB_OTG_HCFG_FSLSS); + } + } + else + { + /* Set default Max speed support */ + USBx_HOST->HCFG &= ~(USB_OTG_HCFG_FSLSS); + } + + /* Make sure the FIFOs are flushed. */ + (void)USB_FlushTxFifo(USBx, 0x10U); /* all Tx FIFOs */ + (void)USB_FlushRxFifo(USBx); + + /* Clear all pending HC Interrupts */ + for (i = 0U; i < cfg.Host_channels; i++) + { + USBx_HC(i)->HCINT = 0xFFFFFFFFU; + USBx_HC(i)->HCINTMSK = 0U; + } + + /* Enable VBUS driving */ + (void)USB_DriveVbus(USBx, 1U); + + HAL_Delay(200U); + + /* Disable all interrupts. */ + USBx->GINTMSK = 0U; + + /* Clear any pending interrupts */ + USBx->GINTSTS = 0xFFFFFFFFU; + + if ((USBx->CID & (0x1U << 8)) != 0U) + { + /* set Rx FIFO size */ + USBx->GRXFSIZ = 0x200U; + USBx->DIEPTXF0_HNPTXFSIZ = (uint32_t)(((0x100U << 16) & USB_OTG_NPTXFD) | 0x200U); + USBx->HPTXFSIZ = (uint32_t)(((0xE0U << 16) & USB_OTG_HPTXFSIZ_PTXFD) | 0x300U); + } + else + { + /* set Rx FIFO size */ + USBx->GRXFSIZ = 0x80U; + USBx->DIEPTXF0_HNPTXFSIZ = (uint32_t)(((0x60U << 16) & USB_OTG_NPTXFD) | 0x80U); + USBx->HPTXFSIZ = (uint32_t)(((0x40U << 16)& USB_OTG_HPTXFSIZ_PTXFD) | 0xE0U); + } + + /* Enable the common interrupts */ + if (cfg.dma_enable == 0U) + { + USBx->GINTMSK |= USB_OTG_GINTMSK_RXFLVLM; + } + + /* Enable interrupts matching to the Host mode ONLY */ + USBx->GINTMSK |= (USB_OTG_GINTMSK_PRTIM | USB_OTG_GINTMSK_HCIM | \ + USB_OTG_GINTMSK_SOFM | USB_OTG_GINTSTS_DISCINT | \ + USB_OTG_GINTMSK_PXFRM_IISOOXFRM | USB_OTG_GINTMSK_WUIM); + + return HAL_OK; +} + +/** + * @brief USB_InitFSLSPClkSel : Initializes the FSLSPClkSel field of the + * HCFG register on the PHY type and set the right frame interval + * @param USBx Selected device + * @param freq clock frequency + * This parameter can be one of these values: + * HCFG_48_MHZ : Full Speed 48 MHz Clock + * HCFG_6_MHZ : Low Speed 6 MHz Clock + * @retval HAL status + */ +HAL_StatusTypeDef USB_InitFSLSPClkSel(USB_OTG_GlobalTypeDef *USBx, uint8_t freq) +{ + uint32_t USBx_BASE = (uint32_t)USBx; + + USBx_HOST->HCFG &= ~(USB_OTG_HCFG_FSLSPCS); + USBx_HOST->HCFG |= (uint32_t)freq & USB_OTG_HCFG_FSLSPCS; + + if (freq == HCFG_48_MHZ) + { + USBx_HOST->HFIR = 48000U; + } + else if (freq == HCFG_6_MHZ) + { + USBx_HOST->HFIR = 6000U; + } + else + { + /* ... */ + } + + return HAL_OK; +} + +/** +* @brief USB_OTG_ResetPort : Reset Host Port + * @param USBx Selected device + * @retval HAL status + * @note (1)The application must wait at least 10 ms + * before clearing the reset bit. + */ +HAL_StatusTypeDef USB_ResetPort(USB_OTG_GlobalTypeDef *USBx) +{ + uint32_t USBx_BASE = (uint32_t)USBx; + + __IO uint32_t hprt0 = 0U; + + hprt0 = USBx_HPRT0; + + hprt0 &= ~(USB_OTG_HPRT_PENA | USB_OTG_HPRT_PCDET | + USB_OTG_HPRT_PENCHNG | USB_OTG_HPRT_POCCHNG); + + USBx_HPRT0 = (USB_OTG_HPRT_PRST | hprt0); + HAL_Delay(100U); /* See Note #1 */ + USBx_HPRT0 = ((~USB_OTG_HPRT_PRST) & hprt0); + HAL_Delay(10U); + + return HAL_OK; +} + +/** + * @brief USB_DriveVbus : activate or de-activate vbus + * @param state VBUS state + * This parameter can be one of these values: + * 0 : VBUS Active + * 1 : VBUS Inactive + * @retval HAL status +*/ +HAL_StatusTypeDef USB_DriveVbus(USB_OTG_GlobalTypeDef *USBx, uint8_t state) +{ + uint32_t USBx_BASE = (uint32_t)USBx; + __IO uint32_t hprt0 = 0U; + + hprt0 = USBx_HPRT0; + + hprt0 &= ~(USB_OTG_HPRT_PENA | USB_OTG_HPRT_PCDET | + USB_OTG_HPRT_PENCHNG | USB_OTG_HPRT_POCCHNG); + + if (((hprt0 & USB_OTG_HPRT_PPWR) == 0U) && (state == 1U)) + { + USBx_HPRT0 = (USB_OTG_HPRT_PPWR | hprt0); + } + if (((hprt0 & USB_OTG_HPRT_PPWR) == USB_OTG_HPRT_PPWR) && (state == 0U)) + { + USBx_HPRT0 = ((~USB_OTG_HPRT_PPWR) & hprt0); + } + return HAL_OK; +} + +/** + * @brief Return Host Core speed + * @param USBx Selected device + * @retval speed : Host speed + * This parameter can be one of these values: + * @arg HCD_SPEED_HIGH: High speed mode + * @arg HCD_SPEED_FULL: Full speed mode + * @arg HCD_SPEED_LOW: Low speed mode + */ +uint32_t USB_GetHostSpeed(USB_OTG_GlobalTypeDef *USBx) +{ + uint32_t USBx_BASE = (uint32_t)USBx; + __IO uint32_t hprt0 = 0U; + + hprt0 = USBx_HPRT0; + return ((hprt0 & USB_OTG_HPRT_PSPD) >> 17); +} + +/** + * @brief Return Host Current Frame number + * @param USBx Selected device + * @retval current frame number +*/ +uint32_t USB_GetCurrentFrame(USB_OTG_GlobalTypeDef *USBx) +{ + uint32_t USBx_BASE = (uint32_t)USBx; + + return (USBx_HOST->HFNUM & USB_OTG_HFNUM_FRNUM); +} + +/** + * @brief Initialize a host channel + * @param USBx Selected device + * @param ch_num Channel number + * This parameter can be a value from 1 to 15 + * @param epnum Endpoint number + * This parameter can be a value from 1 to 15 + * @param dev_address Current device address + * This parameter can be a value from 0 to 255 + * @param speed Current device speed + * This parameter can be one of these values: + * @arg USB_OTG_SPEED_HIGH: High speed mode + * @arg USB_OTG_SPEED_FULL: Full speed mode + * @arg USB_OTG_SPEED_LOW: Low speed mode + * @param ep_type Endpoint Type + * This parameter can be one of these values: + * @arg EP_TYPE_CTRL: Control type + * @arg EP_TYPE_ISOC: Isochronous type + * @arg EP_TYPE_BULK: Bulk type + * @arg EP_TYPE_INTR: Interrupt type + * @param mps Max Packet Size + * This parameter can be a value from 0 to32K + * @retval HAL state + */ +HAL_StatusTypeDef USB_HC_Init(USB_OTG_GlobalTypeDef *USBx, + uint8_t ch_num, + uint8_t epnum, + uint8_t dev_address, + uint8_t speed, + uint8_t ep_type, + uint16_t mps) +{ + HAL_StatusTypeDef ret = HAL_OK; + uint32_t USBx_BASE = (uint32_t)USBx; + uint32_t HCcharEpDir, HCcharLowSpeed; + + /* Clear old interrupt conditions for this host channel. */ + USBx_HC((uint32_t)ch_num)->HCINT = 0xFFFFFFFFU; + + /* Enable channel interrupts required for this transfer. */ + switch (ep_type) + { + case EP_TYPE_CTRL: + case EP_TYPE_BULK: + USBx_HC((uint32_t)ch_num)->HCINTMSK = USB_OTG_HCINTMSK_XFRCM | + USB_OTG_HCINTMSK_STALLM | + USB_OTG_HCINTMSK_TXERRM | + USB_OTG_HCINTMSK_DTERRM | + USB_OTG_HCINTMSK_AHBERR | + USB_OTG_HCINTMSK_NAKM; + + if ((epnum & 0x80U) == 0x80U) + { + USBx_HC((uint32_t)ch_num)->HCINTMSK |= USB_OTG_HCINTMSK_BBERRM; + } + else + { + if ((USBx->CID & (0x1U << 8)) != 0U) + { + USBx_HC((uint32_t)ch_num)->HCINTMSK |= (USB_OTG_HCINTMSK_NYET | USB_OTG_HCINTMSK_ACKM); + } + } + break; + + case EP_TYPE_INTR: + USBx_HC((uint32_t)ch_num)->HCINTMSK = USB_OTG_HCINTMSK_XFRCM | + USB_OTG_HCINTMSK_STALLM | + USB_OTG_HCINTMSK_TXERRM | + USB_OTG_HCINTMSK_DTERRM | + USB_OTG_HCINTMSK_NAKM | + USB_OTG_HCINTMSK_AHBERR | + USB_OTG_HCINTMSK_FRMORM; + + if ((epnum & 0x80U) == 0x80U) + { + USBx_HC((uint32_t)ch_num)->HCINTMSK |= USB_OTG_HCINTMSK_BBERRM; + } + + break; + + case EP_TYPE_ISOC: + USBx_HC((uint32_t)ch_num)->HCINTMSK = USB_OTG_HCINTMSK_XFRCM | + USB_OTG_HCINTMSK_ACKM | + USB_OTG_HCINTMSK_AHBERR | + USB_OTG_HCINTMSK_FRMORM; + + if ((epnum & 0x80U) == 0x80U) + { + USBx_HC((uint32_t)ch_num)->HCINTMSK |= (USB_OTG_HCINTMSK_TXERRM | USB_OTG_HCINTMSK_BBERRM); + } + break; + + default: + ret = HAL_ERROR; + break; + } + + /* Enable the top level host channel interrupt. */ + USBx_HOST->HAINTMSK |= 1UL << (ch_num & 0xFU); + + /* Make sure host channel interrupts are enabled. */ + USBx->GINTMSK |= USB_OTG_GINTMSK_HCIM; + + /* Program the HCCHAR register */ + if ((epnum & 0x80U) == 0x80U) + { + HCcharEpDir = (0x1U << 15) & USB_OTG_HCCHAR_EPDIR; + } + else + { + HCcharEpDir = 0U; + } + + if (speed == HPRT0_PRTSPD_LOW_SPEED) + { + HCcharLowSpeed = (0x1U << 17) & USB_OTG_HCCHAR_LSDEV; + } + else + { + HCcharLowSpeed = 0U; + } + + USBx_HC((uint32_t)ch_num)->HCCHAR = (((uint32_t)dev_address << 22) & USB_OTG_HCCHAR_DAD) | + ((((uint32_t)epnum & 0x7FU) << 11) & USB_OTG_HCCHAR_EPNUM) | + (((uint32_t)ep_type << 18) & USB_OTG_HCCHAR_EPTYP) | + ((uint32_t)mps & USB_OTG_HCCHAR_MPSIZ) | HCcharEpDir | HCcharLowSpeed; + + if (ep_type == EP_TYPE_INTR) + { + USBx_HC((uint32_t)ch_num)->HCCHAR |= USB_OTG_HCCHAR_ODDFRM ; + } + + return ret; +} + +/** + * @brief Start a transfer over a host channel + * @param USBx Selected device + * @param hc pointer to host channel structure + * @param dma USB dma enabled or disabled + * This parameter can be one of these values: + * 0 : DMA feature not used + * 1 : DMA feature used + * @retval HAL state + */ +HAL_StatusTypeDef USB_HC_StartXfer(USB_OTG_GlobalTypeDef *USBx, USB_OTG_HCTypeDef *hc, uint8_t dma) +{ + uint32_t USBx_BASE = (uint32_t)USBx; + uint32_t ch_num = (uint32_t)hc->ch_num; + static __IO uint32_t tmpreg = 0U; + uint8_t is_oddframe; + uint16_t len_words; + uint16_t num_packets; + uint16_t max_hc_pkt_count = 256U; + + if (((USBx->CID & (0x1U << 8)) != 0U) && (hc->speed == USBH_HS_SPEED)) + { + if ((dma == 0U) && (hc->do_ping == 1U)) + { + (void)USB_DoPing(USBx, hc->ch_num); + return HAL_OK; + } + else if (dma == 1U) + { + USBx_HC(ch_num)->HCINTMSK &= ~(USB_OTG_HCINTMSK_NYET | USB_OTG_HCINTMSK_ACKM); + hc->do_ping = 0U; + } + else + { + /* ... */ + } + } + + /* Compute the expected number of packets associated to the transfer */ + if (hc->xfer_len > 0U) + { + num_packets = (uint16_t)((hc->xfer_len + hc->max_packet - 1U) / hc->max_packet); + + if (num_packets > max_hc_pkt_count) + { + num_packets = max_hc_pkt_count; + hc->xfer_len = (uint32_t)num_packets * hc->max_packet; + } + } + else + { + num_packets = 1U; + } + if (hc->ep_is_in != 0U) + { + hc->xfer_len = (uint32_t)num_packets * hc->max_packet; + } + + /* Initialize the HCTSIZn register */ + USBx_HC(ch_num)->HCTSIZ = (hc->xfer_len & USB_OTG_HCTSIZ_XFRSIZ) | + (((uint32_t)num_packets << 19) & USB_OTG_HCTSIZ_PKTCNT) | + (((uint32_t)hc->data_pid << 29) & USB_OTG_HCTSIZ_DPID); + + if (dma != 0U) + { + /* xfer_buff MUST be 32-bits aligned */ + USBx_HC(ch_num)->HCDMA = (uint32_t)hc->xfer_buff; + } + + is_oddframe = (((uint32_t)USBx_HOST->HFNUM & 0x01U) != 0U) ? 0U : 1U; + USBx_HC(ch_num)->HCCHAR &= ~USB_OTG_HCCHAR_ODDFRM; + USBx_HC(ch_num)->HCCHAR |= (uint32_t)is_oddframe << 29; + + /* Set host channel enable */ + tmpreg = USBx_HC(ch_num)->HCCHAR; + tmpreg &= ~USB_OTG_HCCHAR_CHDIS; + + /* make sure to set the correct ep direction */ + if (hc->ep_is_in != 0U) + { + tmpreg |= USB_OTG_HCCHAR_EPDIR; + } + else + { + tmpreg &= ~USB_OTG_HCCHAR_EPDIR; + } + tmpreg |= USB_OTG_HCCHAR_CHENA; + USBx_HC(ch_num)->HCCHAR = tmpreg; + + if (dma == 0U) /* Slave mode */ + { + if ((hc->ep_is_in == 0U) && (hc->xfer_len > 0U)) + { + switch (hc->ep_type) + { + /* Non periodic transfer */ + case EP_TYPE_CTRL: + case EP_TYPE_BULK: + + len_words = (uint16_t)((hc->xfer_len + 3U) / 4U); + + /* check if there is enough space in FIFO space */ + if (len_words > (USBx->HNPTXSTS & 0xFFFFU)) + { + /* need to process data in nptxfempty interrupt */ + USBx->GINTMSK |= USB_OTG_GINTMSK_NPTXFEM; + } + break; + + /* Periodic transfer */ + case EP_TYPE_INTR: + case EP_TYPE_ISOC: + len_words = (uint16_t)((hc->xfer_len + 3U) / 4U); + /* check if there is enough space in FIFO space */ + if (len_words > (USBx_HOST->HPTXSTS & 0xFFFFU)) /* split the transfer */ + { + /* need to process data in ptxfempty interrupt */ + USBx->GINTMSK |= USB_OTG_GINTMSK_PTXFEM; + } + break; + + default: + break; + } + + /* Write packet into the Tx FIFO. */ + (void)USB_WritePacket(USBx, hc->xfer_buff, hc->ch_num, (uint16_t)hc->xfer_len, 0); + } + } + + return HAL_OK; +} + +/** + * @brief Read all host channel interrupts status + * @param USBx Selected device + * @retval HAL state + */ +uint32_t USB_HC_ReadInterrupt(USB_OTG_GlobalTypeDef *USBx) +{ + uint32_t USBx_BASE = (uint32_t)USBx; + + return ((USBx_HOST->HAINT) & 0xFFFFU); +} + +/** + * @brief Halt a host channel + * @param USBx Selected device + * @param hc_num Host Channel number + * This parameter can be a value from 1 to 15 + * @retval HAL state + */ +HAL_StatusTypeDef USB_HC_Halt(USB_OTG_GlobalTypeDef *USBx, uint8_t hc_num) +{ + uint32_t USBx_BASE = (uint32_t)USBx; + uint32_t hcnum = (uint32_t)hc_num; + uint32_t count = 0U; + uint32_t HcEpType = (USBx_HC(hcnum)->HCCHAR & USB_OTG_HCCHAR_EPTYP) >> 18; + + /* Check for space in the request queue to issue the halt. */ + if ((HcEpType == HCCHAR_CTRL) || (HcEpType == HCCHAR_BULK)) + { + USBx_HC(hcnum)->HCCHAR |= USB_OTG_HCCHAR_CHDIS; + + if ((USBx->HNPTXSTS & (0xFFU << 16)) == 0U) + { + USBx_HC(hcnum)->HCCHAR &= ~USB_OTG_HCCHAR_CHENA; + USBx_HC(hcnum)->HCCHAR |= USB_OTG_HCCHAR_CHENA; + USBx_HC(hcnum)->HCCHAR &= ~USB_OTG_HCCHAR_EPDIR; + do + { + if (++count > 1000U) + { + break; + } + } + while ((USBx_HC(hcnum)->HCCHAR & USB_OTG_HCCHAR_CHENA) == USB_OTG_HCCHAR_CHENA); + } + else + { + USBx_HC(hcnum)->HCCHAR |= USB_OTG_HCCHAR_CHENA; + } + } + else + { + USBx_HC(hcnum)->HCCHAR |= USB_OTG_HCCHAR_CHDIS; + + if ((USBx_HOST->HPTXSTS & (0xFFU << 16)) == 0U) + { + USBx_HC(hcnum)->HCCHAR &= ~USB_OTG_HCCHAR_CHENA; + USBx_HC(hcnum)->HCCHAR |= USB_OTG_HCCHAR_CHENA; + USBx_HC(hcnum)->HCCHAR &= ~USB_OTG_HCCHAR_EPDIR; + do + { + if (++count > 1000U) + { + break; + } + } + while ((USBx_HC(hcnum)->HCCHAR & USB_OTG_HCCHAR_CHENA) == USB_OTG_HCCHAR_CHENA); + } + else + { + USBx_HC(hcnum)->HCCHAR |= USB_OTG_HCCHAR_CHENA; + } + } + + return HAL_OK; +} + +/** + * @brief Initiate Do Ping protocol + * @param USBx Selected device + * @param hc_num Host Channel number + * This parameter can be a value from 1 to 15 + * @retval HAL state + */ +HAL_StatusTypeDef USB_DoPing(USB_OTG_GlobalTypeDef *USBx, uint8_t ch_num) +{ + uint32_t USBx_BASE = (uint32_t)USBx; + uint32_t chnum = (uint32_t)ch_num; + uint32_t num_packets = 1U; + uint32_t tmpreg; + + USBx_HC(chnum)->HCTSIZ = ((num_packets << 19) & USB_OTG_HCTSIZ_PKTCNT) | + USB_OTG_HCTSIZ_DOPING; + + /* Set host channel enable */ + tmpreg = USBx_HC(chnum)->HCCHAR; + tmpreg &= ~USB_OTG_HCCHAR_CHDIS; + tmpreg |= USB_OTG_HCCHAR_CHENA; + USBx_HC(chnum)->HCCHAR = tmpreg; + + return HAL_OK; +} + +/** + * @brief Stop Host Core + * @param USBx Selected device + * @retval HAL state + */ +HAL_StatusTypeDef USB_StopHost(USB_OTG_GlobalTypeDef *USBx) +{ + uint32_t USBx_BASE = (uint32_t)USBx; + uint32_t count = 0U; + uint32_t value; + uint32_t i; + + + (void)USB_DisableGlobalInt(USBx); + + /* Flush FIFO */ + (void)USB_FlushTxFifo(USBx, 0x10U); + (void)USB_FlushRxFifo(USBx); + + /* Flush out any leftover queued requests. */ + for (i = 0U; i <= 15U; i++) + { + value = USBx_HC(i)->HCCHAR; + value |= USB_OTG_HCCHAR_CHDIS; + value &= ~USB_OTG_HCCHAR_CHENA; + value &= ~USB_OTG_HCCHAR_EPDIR; + USBx_HC(i)->HCCHAR = value; + } + + /* Halt all channels to put them into a known state. */ + for (i = 0U; i <= 15U; i++) + { + value = USBx_HC(i)->HCCHAR; + value |= USB_OTG_HCCHAR_CHDIS; + value |= USB_OTG_HCCHAR_CHENA; + value &= ~USB_OTG_HCCHAR_EPDIR; + USBx_HC(i)->HCCHAR = value; + + do + { + if (++count > 1000U) + { + break; + } + } + while ((USBx_HC(i)->HCCHAR & USB_OTG_HCCHAR_CHENA) == USB_OTG_HCCHAR_CHENA); + } + + /* Clear any pending Host interrupts */ + USBx_HOST->HAINT = 0xFFFFFFFFU; + USBx->GINTSTS = 0xFFFFFFFFU; + (void)USB_EnableGlobalInt(USBx); + + return HAL_OK; +} + +/** + * @brief USB_ActivateRemoteWakeup active remote wakeup signalling + * @param USBx Selected device + * @retval HAL status + */ +HAL_StatusTypeDef USB_ActivateRemoteWakeup(USB_OTG_GlobalTypeDef *USBx) +{ + uint32_t USBx_BASE = (uint32_t)USBx; + + if ((USBx_DEVICE->DSTS & USB_OTG_DSTS_SUSPSTS) == USB_OTG_DSTS_SUSPSTS) + { + /* active Remote wakeup signalling */ + USBx_DEVICE->DCTL |= USB_OTG_DCTL_RWUSIG; + } + + return HAL_OK; +} + +/** + * @brief USB_DeActivateRemoteWakeup de-active remote wakeup signalling + * @param USBx Selected device + * @retval HAL status + */ +HAL_StatusTypeDef USB_DeActivateRemoteWakeup(USB_OTG_GlobalTypeDef *USBx) +{ + uint32_t USBx_BASE = (uint32_t)USBx; + + /* active Remote wakeup signalling */ + USBx_DEVICE->DCTL &= ~(USB_OTG_DCTL_RWUSIG); + + return HAL_OK; +} +#endif /* defined (USB_OTG_FS) || defined (USB_OTG_HS) */ + + +/** + * @} + */ + +/** + * @} + */ +#endif /* defined (USB_OTG_FS) || defined (USB_OTG_HS) */ +#endif /* defined (HAL_PCD_MODULE_ENABLED) || defined (HAL_HCD_MODULE_ENABLED) */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/Inc/bsp_driver_sd.h b/Inc/bsp_driver_sd.h new file mode 100644 index 0000000..39b14ca --- /dev/null +++ b/Inc/bsp_driver_sd.h @@ -0,0 +1,92 @@ +/** + ****************************************************************************** + * @file bsp_driver_sd.h for F4 (based on stm324x9i_eval_sd.h) + * @brief This file contains the common defines and functions prototypes for + * the bsp_driver_sd.c driver. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2019 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under Ultimate Liberty license + * SLA0044, the "License"; You may not use this file except in compliance with + * the License. You may obtain a copy of the License at: + * www.st.com/SLA0044 + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F4_SD_H +#define __STM32F4_SD_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f4xx_hal.h" + +/* Exported types --------------------------------------------------------*/ +/** + * @brief SD Card information structure + */ +#define BSP_SD_CardInfo HAL_SD_CardInfoTypeDef + +/* Exported constants --------------------------------------------------------*/ +/** + * @brief SD status structure definition + */ +#define MSD_OK ((uint8_t)0x00) +#define MSD_ERROR ((uint8_t)0x01) + +/** + * @brief SD transfer state definition + */ +#define SD_TRANSFER_OK ((uint8_t)0x00) +#define SD_TRANSFER_BUSY ((uint8_t)0x01) + +#define SD_PRESENT ((uint8_t)0x01) +#define SD_NOT_PRESENT ((uint8_t)0x00) +#define SD_DATATIMEOUT ((uint32_t)100000000) + +#ifdef OLD_API +/* kept to avoid issue when migrating old projects. */ +/* USER CODE BEGIN 0 */ + +/* USER CODE END 0 */ +#else +/* USER CODE BEGIN BSP_H_CODE */ +/* Exported functions --------------------------------------------------------*/ +uint8_t BSP_SD_Init(void); +uint8_t BSP_SD_ITConfig(void); +void BSP_SD_DetectIT(void); +void BSP_SD_DetectCallback(void); +uint8_t BSP_SD_ReadBlocks(uint32_t *pData, uint32_t ReadAddr, uint32_t NumOfBlocks, uint32_t Timeout); +uint8_t BSP_SD_WriteBlocks(uint32_t *pData, uint32_t WriteAddr, uint32_t NumOfBlocks, uint32_t Timeout); +uint8_t BSP_SD_ReadBlocks_DMA(uint32_t *pData, uint32_t ReadAddr, uint32_t NumOfBlocks); +uint8_t BSP_SD_WriteBlocks_DMA(uint32_t *pData, uint32_t WriteAddr, uint32_t NumOfBlocks); +uint8_t BSP_SD_Erase(uint32_t StartAddr, uint32_t EndAddr); +void BSP_SD_IRQHandler(void); +void BSP_SD_DMA_Tx_IRQHandler(void); +void BSP_SD_DMA_Rx_IRQHandler(void); +uint8_t BSP_SD_GetCardState(void); +void BSP_SD_GetCardInfo(HAL_SD_CardInfoTypeDef *CardInfo); +uint8_t BSP_SD_IsDetected(void); + +/* These functions can be modified in case the current settings (e.g. DMA stream) + need to be changed for specific application needs */ +void BSP_SD_AbortCallback(void); +void BSP_SD_WriteCpltCallback(void); +void BSP_SD_ReadCpltCallback(void); +/* USER CODE END BSP_H_CODE */ +#endif + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F4_SD_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/Inc/crc.h b/Inc/crc.h index d614201..d85d053 100644 --- a/Inc/crc.h +++ b/Inc/crc.h @@ -9,10 +9,10 @@ *

© Copyright (c) 2019 STMicroelectronics. * All rights reserved.

* - * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the - * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause + * This software component is licensed by ST under Ultimate Liberty license + * SLA0044, the "License"; You may not use this file except in compliance with + * the License. You may obtain a copy of the License at: + * www.st.com/SLA0044 * ****************************************************************************** */ diff --git a/Inc/dma.h b/Inc/dma.h index 76680bb..37e5155 100644 --- a/Inc/dma.h +++ b/Inc/dma.h @@ -9,10 +9,10 @@ *

© Copyright (c) 2019 STMicroelectronics. * All rights reserved.

* - * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the - * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause + * This software component is licensed by ST under Ultimate Liberty license + * SLA0044, the "License"; You may not use this file except in compliance with + * the License. You may obtain a copy of the License at: + * www.st.com/SLA0044 * ****************************************************************************** */ diff --git a/Inc/fatfs.h b/Inc/fatfs.h new file mode 100644 index 0000000..cc4292b --- /dev/null +++ b/Inc/fatfs.h @@ -0,0 +1,49 @@ +/** + ****************************************************************************** + * @file fatfs.h + * @brief Header for fatfs applications + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2019 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under Ultimate Liberty license + * SLA0044, the "License"; You may not use this file except in compliance with + * the License. You may obtain a copy of the License at: + * www.st.com/SLA0044 + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __fatfs_H +#define __fatfs_H +#ifdef __cplusplus + extern "C" { +#endif + +#include "ff.h" +#include "ff_gen_drv.h" +#include "sd_diskio.h" /* defines SD_Driver as external */ + +/* USER CODE BEGIN Includes */ + +/* USER CODE END Includes */ + +extern uint8_t retSD; /* Return value for SD */ +extern char SDPath[4]; /* SD logical drive path */ +extern FATFS SDFatFS; /* File system object for SD logical drive */ +extern FIL SDFile; /* File object for SD */ + +void MX_FATFS_Init(void); + +/* USER CODE BEGIN Prototypes */ + +/* USER CODE END Prototypes */ +#ifdef __cplusplus +} +#endif +#endif /*__fatfs_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/Inc/ffconf.h b/Inc/ffconf.h new file mode 100644 index 0000000..1136cde --- /dev/null +++ b/Inc/ffconf.h @@ -0,0 +1,270 @@ +/* USER CODE BEGIN Header */ +/** + ****************************************************************************** + * FatFs - Generic FAT file system module R0.12c (C)ChaN, 2017 + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2019 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under Ultimate Liberty license + * SLA0044, the "License"; You may not use this file except in compliance with + * the License. You may obtain a copy of the License at: + * www.st.com/SLA0044 + * + ****************************************************************************** + */ +/* USER CODE END Header */ + +#ifndef _FFCONF +#define _FFCONF 68300 /* Revision ID */ + +/*-----------------------------------------------------------------------------/ +/ Additional user header to be used +/-----------------------------------------------------------------------------*/ + +#include "main.h" +#include "stm32f4xx_hal.h" +#include "bsp_driver_sd.h" + +/*-----------------------------------------------------------------------------/ +/ Function Configurations +/-----------------------------------------------------------------------------*/ + +#define _FS_READONLY 0 /* 0:Read/Write or 1:Read only */ +/* This option switches read-only configuration. (0:Read/Write or 1:Read-only) +/ Read-only configuration removes writing API functions, f_write(), f_sync(), +/ f_unlink(), f_mkdir(), f_chmod(), f_rename(), f_truncate(), f_getfree() +/ and optional writing functions as well. */ + +#define _FS_MINIMIZE 0 /* 0 to 3 */ +/* This option defines minimization level to remove some basic API functions. +/ +/ 0: All basic functions are enabled. +/ 1: f_stat(), f_getfree(), f_unlink(), f_mkdir(), f_truncate() and f_rename() +/ are removed. +/ 2: f_opendir(), f_readdir() and f_closedir() are removed in addition to 1. +/ 3: f_lseek() function is removed in addition to 2. */ + +#define _USE_STRFUNC 2 /* 0:Disable or 1-2:Enable */ +/* This option switches string functions, f_gets(), f_putc(), f_puts() and +/ f_printf(). +/ +/ 0: Disable string functions. +/ 1: Enable without LF-CRLF conversion. +/ 2: Enable with LF-CRLF conversion. */ + +#define _USE_FIND 0 +/* This option switches filtered directory read functions, f_findfirst() and +/ f_findnext(). (0:Disable, 1:Enable 2:Enable with matching altname[] too) */ + +#define _USE_MKFS 0 +/* This option switches f_mkfs() function. (0:Disable or 1:Enable) */ + +#define _USE_FASTSEEK 1 +/* This option switches fast seek feature. (0:Disable or 1:Enable) */ + +#define _USE_EXPAND 0 +/* This option switches f_expand function. (0:Disable or 1:Enable) */ + +#define _USE_CHMOD 0 +/* This option switches attribute manipulation functions, f_chmod() and f_utime(). +/ (0:Disable or 1:Enable) Also _FS_READONLY needs to be 0 to enable this option. */ + +#define _USE_LABEL 0 +/* This option switches volume label functions, f_getlabel() and f_setlabel(). +/ (0:Disable or 1:Enable) */ + +#define _USE_FORWARD 0 +/* This option switches f_forward() function. (0:Disable or 1:Enable) */ + +/*-----------------------------------------------------------------------------/ +/ Locale and Namespace Configurations +/-----------------------------------------------------------------------------*/ + +#define _CODE_PAGE 850 +/* This option specifies the OEM code page to be used on the target system. +/ Incorrect setting of the code page can cause a file open failure. +/ +/ 1 - ASCII (No extended character. Non-LFN cfg. only) +/ 437 - U.S. +/ 720 - Arabic +/ 737 - Greek +/ 771 - KBL +/ 775 - Baltic +/ 850 - Latin 1 +/ 852 - Latin 2 +/ 855 - Cyrillic +/ 857 - Turkish +/ 860 - Portuguese +/ 861 - Icelandic +/ 862 - Hebrew +/ 863 - Canadian French +/ 864 - Arabic +/ 865 - Nordic +/ 866 - Russian +/ 869 - Greek 2 +/ 932 - Japanese (DBCS) +/ 936 - Simplified Chinese (DBCS) +/ 949 - Korean (DBCS) +/ 950 - Traditional Chinese (DBCS) +*/ + +#define _USE_LFN 1 /* 0 to 3 */ +#define _MAX_LFN 255 /* Maximum LFN length to handle (12 to 255) */ +/* The _USE_LFN switches the support of long file name (LFN). +/ +/ 0: Disable support of LFN. _MAX_LFN has no effect. +/ 1: Enable LFN with static working buffer on the BSS. Always NOT thread-safe. +/ 2: Enable LFN with dynamic working buffer on the STACK. +/ 3: Enable LFN with dynamic working buffer on the HEAP. +/ +/ To enable the LFN, Unicode handling functions (option/unicode.c) must be added +/ to the project. The working buffer occupies (_MAX_LFN + 1) * 2 bytes and +/ additional 608 bytes at exFAT enabled. _MAX_LFN can be in range from 12 to 255. +/ It should be set 255 to support full featured LFN operations. +/ When use stack for the working buffer, take care on stack overflow. When use heap +/ memory for the working buffer, memory management functions, ff_memalloc() and +/ ff_memfree(), must be added to the project. */ + +#define _LFN_UNICODE 1 /* 0:ANSI/OEM or 1:Unicode */ +/* This option switches character encoding on the API. (0:ANSI/OEM or 1:UTF-16) +/ To use Unicode string for the path name, enable LFN and set _LFN_UNICODE = 1. +/ This option also affects behavior of string I/O functions. */ + +#define _STRF_ENCODE 3 +/* When _LFN_UNICODE == 1, this option selects the character encoding ON THE FILE to +/ be read/written via string I/O functions, f_gets(), f_putc(), f_puts and f_printf(). +/ +/ 0: ANSI/OEM +/ 1: UTF-16LE +/ 2: UTF-16BE +/ 3: UTF-8 +/ +/ This option has no effect when _LFN_UNICODE == 0. */ + +#define _FS_RPATH 0 /* 0 to 2 */ +/* This option configures support of relative path. +/ +/ 0: Disable relative path and remove related functions. +/ 1: Enable relative path. f_chdir() and f_chdrive() are available. +/ 2: f_getcwd() function is available in addition to 1. +*/ + +/*---------------------------------------------------------------------------/ +/ Drive/Volume Configurations +/----------------------------------------------------------------------------*/ + +#define _VOLUMES 1 +/* Number of volumes (logical drives) to be used. */ + +/* USER CODE BEGIN Volumes */ +#define _STR_VOLUME_ID 0 /* 0:Use only 0-9 for drive ID, 1:Use strings for drive ID */ +#define _VOLUME_STRS "RAM","NAND","CF","SD1","SD2","USB1","USB2","USB3" +/* _STR_VOLUME_ID switches string support of volume ID. +/ When _STR_VOLUME_ID is set to 1, also pre-defined strings can be used as drive +/ number in the path name. _VOLUME_STRS defines the drive ID strings for each +/ logical drives. Number of items must be equal to _VOLUMES. Valid characters for +/ the drive ID strings are: A-Z and 0-9. */ +/* USER CODE END Volumes */ + +#define _MULTI_PARTITION 0 /* 0:Single partition, 1:Multiple partition */ +/* This option switches support of multi-partition on a physical drive. +/ By default (0), each logical drive number is bound to the same physical drive +/ number and only an FAT volume found on the physical drive will be mounted. +/ When multi-partition is enabled (1), each logical drive number can be bound to +/ arbitrary physical drive and partition listed in the VolToPart[]. Also f_fdisk() +/ funciton will be available. */ +#define _MIN_SS 512 /* 512, 1024, 2048 or 4096 */ +#define _MAX_SS 512 /* 512, 1024, 2048 or 4096 */ +/* These options configure the range of sector size to be supported. (512, 1024, +/ 2048 or 4096) Always set both 512 for most systems, all type of memory cards and +/ harddisk. But a larger value may be required for on-board flash memory and some +/ type of optical media. When _MAX_SS is larger than _MIN_SS, FatFs is configured +/ to variable sector size and GET_SECTOR_SIZE command must be implemented to the +/ disk_ioctl() function. */ + +#define _USE_TRIM 0 +/* This option switches support of ATA-TRIM. (0:Disable or 1:Enable) +/ To enable Trim function, also CTRL_TRIM command should be implemented to the +/ disk_ioctl() function. */ + +#define _FS_NOFSINFO 0 /* 0,1,2 or 3 */ +/* If you need to know correct free space on the FAT32 volume, set bit 0 of this +/ option, and f_getfree() function at first time after volume mount will force +/ a full FAT scan. Bit 1 controls the use of last allocated cluster number. +/ +/ bit0=0: Use free cluster count in the FSINFO if available. +/ bit0=1: Do not trust free cluster count in the FSINFO. +/ bit1=0: Use last allocated cluster number in the FSINFO if available. +/ bit1=1: Do not trust last allocated cluster number in the FSINFO. +*/ + +/*---------------------------------------------------------------------------/ +/ System Configurations +/----------------------------------------------------------------------------*/ + +#define _FS_TINY 0 /* 0:Normal or 1:Tiny */ +/* This option switches tiny buffer configuration. (0:Normal or 1:Tiny) +/ At the tiny configuration, size of file object (FIL) is reduced _MAX_SS bytes. +/ Instead of private sector buffer eliminated from the file object, common sector +/ buffer in the file system object (FATFS) is used for the file data transfer. */ + +#define _FS_EXFAT 0 +/* This option switches support of exFAT file system. (0:Disable or 1:Enable) +/ When enable exFAT, also LFN needs to be enabled. (_USE_LFN >= 1) +/ Note that enabling exFAT discards C89 compatibility. */ + +#define _FS_NORTC 0 +#define _NORTC_MON 6 +#define _NORTC_MDAY 4 +#define _NORTC_YEAR 2015 +/* The option _FS_NORTC switches timestamp functiton. If the system does not have +/ any RTC function or valid timestamp is not needed, set _FS_NORTC = 1 to disable +/ the timestamp function. All objects modified by FatFs will have a fixed timestamp +/ defined by _NORTC_MON, _NORTC_MDAY and _NORTC_YEAR in local time. +/ To enable timestamp function (_FS_NORTC = 0), get_fattime() function need to be +/ added to the project to get current time form real-time clock. _NORTC_MON, +/ _NORTC_MDAY and _NORTC_YEAR have no effect. +/ These options have no effect at read-only configuration (_FS_READONLY = 1). */ + +#define _FS_LOCK 3 /* 0:Disable or >=1:Enable */ +/* The option _FS_LOCK switches file lock function to control duplicated file open +/ and illegal operation to open objects. This option must be 0 when _FS_READONLY +/ is 1. +/ +/ 0: Disable file lock function. To avoid volume corruption, application program +/ should avoid illegal open, remove and rename to the open objects. +/ >0: Enable file lock function. The value defines how many files/sub-directories +/ can be opened simultaneously under file lock control. Note that the file +/ lock control is independent of re-entrancy. */ + +#define _FS_REENTRANT 0 /* 0:Disable or 1:Enable */ +#define _FS_TIMEOUT 1000 /* Timeout period in unit of time ticks */ +#define _SYNC_t osSemaphoreId +/* The option _FS_REENTRANT switches the re-entrancy (thread safe) of the FatFs +/ module itself. Note that regardless of this option, file access to different +/ volume is always re-entrant and volume control functions, f_mount(), f_mkfs() +/ and f_fdisk() function, are always not re-entrant. Only file/directory access +/ to the same volume is under control of this function. +/ +/ 0: Disable re-entrancy. _FS_TIMEOUT and _SYNC_t have no effect. +/ 1: Enable re-entrancy. Also user provided synchronization handlers, +/ ff_req_grant(), ff_rel_grant(), ff_del_syncobj() and ff_cre_syncobj() +/ function, must be added to the project. Samples are available in +/ option/syscall.c. +/ +/ The _FS_TIMEOUT defines timeout period in unit of time tick. +/ The _SYNC_t defines O/S dependent sync object type. e.g. HANDLE, ID, OS_EVENT*, +/ SemaphoreHandle_t and etc.. A header file for O/S definitions needs to be +/ included somewhere in the scope of ff.h. */ + +/* define the ff_malloc ff_free macros as standard malloc free */ +#if !defined(ff_malloc) && !defined(ff_free) +#include +#define ff_malloc malloc +#define ff_free free +#endif + +#endif /* _FFCONF */ diff --git a/Inc/fsmc.h b/Inc/fsmc.h new file mode 100644 index 0000000..843c26a --- /dev/null +++ b/Inc/fsmc.h @@ -0,0 +1,60 @@ +/** + ****************************************************************************** + * File Name : FSMC.h + * Description : This file provides code for the configuration + * of the FSMC peripheral. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2019 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under Ultimate Liberty license + * SLA0044, the "License"; You may not use this file except in compliance with + * the License. You may obtain a copy of the License at: + * www.st.com/SLA0044 + * + ****************************************************************************** + */ +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __FSMC_H +#define __FSMC_H +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "main.h" + +/* USER CODE BEGIN Includes */ + +/* USER CODE END Includes */ + +extern SRAM_HandleTypeDef hsram1; + +/* USER CODE BEGIN Private defines */ + +/* USER CODE END Private defines */ + +void MX_FSMC_Init(void); +void HAL_SRAM_MspInit(SRAM_HandleTypeDef* hsram); +void HAL_SRAM_MspDeInit(SRAM_HandleTypeDef* hsram); + +/* USER CODE BEGIN Prototypes */ + +/* USER CODE END Prototypes */ + +#ifdef __cplusplus +} +#endif +#endif /*__FSMC_H */ + +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/Inc/gpio.h b/Inc/gpio.h index 1e2e3a2..d3c4629 100644 --- a/Inc/gpio.h +++ b/Inc/gpio.h @@ -9,10 +9,10 @@ *

© Copyright (c) 2019 STMicroelectronics. * All rights reserved.

* - * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the - * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause + * This software component is licensed by ST under Ultimate Liberty license + * SLA0044, the "License"; You may not use this file except in compliance with + * the License. You may obtain a copy of the License at: + * www.st.com/SLA0044 * ****************************************************************************** */ diff --git a/Inc/main.h b/Inc/main.h index 5194308..8a3a06d 100644 --- a/Inc/main.h +++ b/Inc/main.h @@ -31,6 +31,7 @@ extern "C" { #include "stm32f4xx_hal.h" #include "stm32f4xx_ll_crc.h" #include "stm32f4xx_ll_dma.h" +#include "stm32f4xx_hal.h" #include "stm32f4xx_ll_spi.h" #include "stm32f4xx_ll_usart.h" #include "stm32f4xx_ll_rcc.h" @@ -71,20 +72,32 @@ void Error_Handler(void); /* USER CODE END EFP */ /* Private defines -----------------------------------------------------------*/ +#define KEY1_Pin LL_GPIO_PIN_3 +#define KEY1_GPIO_Port GPIOE +#define KEY0_Pin LL_GPIO_PIN_4 +#define KEY0_GPIO_Port GPIOE +#define DEBUG0_Pin LL_GPIO_PIN_0 +#define DEBUG0_GPIO_Port GPIOC +#define DEBUG1_Pin LL_GPIO_PIN_1 +#define DEBUG1_GPIO_Port GPIOC +#define DEBUG2_Pin LL_GPIO_PIN_2 +#define DEBUG2_GPIO_Port GPIOC +#define DEBUG3_Pin LL_GPIO_PIN_3 +#define DEBUG3_GPIO_Port GPIOC #define LED0_Pin LL_GPIO_PIN_6 #define LED0_GPIO_Port GPIOA #define LED1_Pin LL_GPIO_PIN_7 #define LED1_GPIO_Port GPIOA #define F_CS_Pin LL_GPIO_PIN_0 #define F_CS_GPIO_Port GPIOB -#define DIAG0_Pin LL_GPIO_PIN_4 -#define DIAG0_GPIO_Port GPIOD -#define DIAG1_Pin LL_GPIO_PIN_5 -#define DIAG1_GPIO_Port GPIOD -#define DIAG2_Pin LL_GPIO_PIN_6 -#define DIAG2_GPIO_Port GPIOD -#define DIAG3_Pin LL_GPIO_PIN_7 -#define DIAG3_GPIO_Port GPIOD +#define T_CS_Pin LL_GPIO_PIN_12 +#define T_CS_GPIO_Port GPIOB +#define NRF_CE_Pin LL_GPIO_PIN_6 +#define NRF_CE_GPIO_Port GPIOB +#define NRF_CS_Pin LL_GPIO_PIN_7 +#define NRF_CS_GPIO_Port GPIOB +#define NRF_IRQ_Pin LL_GPIO_PIN_8 +#define NRF_IRQ_GPIO_Port GPIOB /* USER CODE BEGIN Private defines */ /* USER CODE END Private defines */ diff --git a/Inc/sd_diskio.h b/Inc/sd_diskio.h new file mode 100644 index 0000000..9300520 --- /dev/null +++ b/Inc/sd_diskio.h @@ -0,0 +1,45 @@ +/* USER CODE BEGIN Header */ +/** + ****************************************************************************** + * @file sd_diskio.h + * @brief Header for sd_diskio.c module + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2019 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under Ultimate Liberty license + * SLA0044, the "License"; You may not use this file except in compliance with + * the License. You may obtain a copy of the License at: + * www.st.com/SLA0044 + * + ****************************************************************************** + */ +/* USER CODE END Header */ + +/* Note: code generation based on sd_diskio_template.h */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __SD_DISKIO_H +#define __SD_DISKIO_H + +/* USER CODE BEGIN firstSection */ +/* can be used to modify / undefine following code or add new definitions */ +/* USER CODE END firstSection */ + +/* Includes ------------------------------------------------------------------*/ +#include "bsp_driver_sd.h" +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ +/* Exported functions ------------------------------------------------------- */ +extern const Diskio_drvTypeDef SD_Driver; + +/* USER CODE BEGIN lastSection */ +/* can be used to modify / undefine previous code or add new definitions */ +/* USER CODE END lastSection */ + +#endif /* __SD_DISKIO_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ + diff --git a/Inc/sdio.h b/Inc/sdio.h new file mode 100644 index 0000000..8e21ebd --- /dev/null +++ b/Inc/sdio.h @@ -0,0 +1,58 @@ +/** + ****************************************************************************** + * File Name : SDIO.h + * Description : This file provides code for the configuration + * of the SDIO instances. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2019 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under Ultimate Liberty license + * SLA0044, the "License"; You may not use this file except in compliance with + * the License. You may obtain a copy of the License at: + * www.st.com/SLA0044 + * + ****************************************************************************** + */ +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __sdio_H +#define __sdio_H +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "main.h" + +/* USER CODE BEGIN Includes */ + +/* USER CODE END Includes */ + +extern SD_HandleTypeDef hsd; + +/* USER CODE BEGIN Private defines */ + +/* USER CODE END Private defines */ + +void MX_SDIO_SD_Init(void); + +/* USER CODE BEGIN Prototypes */ + +/* USER CODE END Prototypes */ + +#ifdef __cplusplus +} +#endif +#endif /*__ sdio_H */ + +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/Inc/spi.h b/Inc/spi.h index 1d1ff6b..f967914 100644 --- a/Inc/spi.h +++ b/Inc/spi.h @@ -9,10 +9,10 @@ *

© Copyright (c) 2019 STMicroelectronics. * All rights reserved.

* - * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the - * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause + * This software component is licensed by ST under Ultimate Liberty license + * SLA0044, the "License"; You may not use this file except in compliance with + * the License. You may obtain a copy of the License at: + * www.st.com/SLA0044 * ****************************************************************************** */ @@ -35,6 +35,7 @@ /* USER CODE END Private defines */ void MX_SPI1_Init(void); +void MX_SPI2_Init(void); /* USER CODE BEGIN Prototypes */ diff --git a/Inc/stm32_assert.h b/Inc/stm32_assert.h index e3bd4a3..5daa9ca 100644 --- a/Inc/stm32_assert.h +++ b/Inc/stm32_assert.h @@ -8,10 +8,10 @@ *

© Copyright (c) 2019 STMicroelectronics. * All rights reserved.

* - * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the - * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause + * This software component is licensed by ST under Ultimate Liberty license + * SLA0044, the "License"; You may not use this file except in compliance with + * the License. You may obtain a copy of the License at: + * www.st.com/SLA0044 * ****************************************************************************** */ diff --git a/Inc/stm32f4xx_hal_conf.h b/Inc/stm32f4xx_hal_conf.h index b72221f..82852b4 100644 --- a/Inc/stm32f4xx_hal_conf.h +++ b/Inc/stm32f4xx_hal_conf.h @@ -48,7 +48,7 @@ /* #define HAL_NAND_MODULE_ENABLED */ /* #define HAL_NOR_MODULE_ENABLED */ /* #define HAL_PCCARD_MODULE_ENABLED */ -/* #define HAL_SRAM_MODULE_ENABLED */ +#define HAL_SRAM_MODULE_ENABLED /* #define HAL_SDRAM_MODULE_ENABLED */ /* #define HAL_HASH_MODULE_ENABLED */ /* #define HAL_I2C_MODULE_ENABLED */ @@ -58,7 +58,7 @@ /* #define HAL_RNG_MODULE_ENABLED */ /* #define HAL_RTC_MODULE_ENABLED */ /* #define HAL_SAI_MODULE_ENABLED */ -/* #define HAL_SD_MODULE_ENABLED */ +#define HAL_SD_MODULE_ENABLED /* #define HAL_MMC_MODULE_ENABLED */ /* #define HAL_SPI_MODULE_ENABLED */ /* #define HAL_TIM_MODULE_ENABLED */ @@ -67,7 +67,7 @@ /* #define HAL_IRDA_MODULE_ENABLED */ /* #define HAL_SMARTCARD_MODULE_ENABLED */ /* #define HAL_WWDG_MODULE_ENABLED */ -/* #define HAL_PCD_MODULE_ENABLED */ +#define HAL_PCD_MODULE_ENABLED /* #define HAL_HCD_MODULE_ENABLED */ /* #define HAL_DSI_MODULE_ENABLED */ /* #define HAL_QSPI_MODULE_ENABLED */ diff --git a/Inc/stm32f4xx_it.h b/Inc/stm32f4xx_it.h index 4a2cc55..837a10f 100644 --- a/Inc/stm32f4xx_it.h +++ b/Inc/stm32f4xx_it.h @@ -56,23 +56,24 @@ void SVC_Handler(void); void DebugMon_Handler(void); void PendSV_Handler(void); void SysTick_Handler(void); -void DMA1_Stream0_IRQHandler(void); void DMA1_Stream1_IRQHandler(void); void DMA1_Stream2_IRQHandler(void); void DMA1_Stream3_IRQHandler(void); void DMA1_Stream4_IRQHandler(void); void DMA1_Stream5_IRQHandler(void); void DMA1_Stream6_IRQHandler(void); +void SPI1_IRQHandler(void); +void SPI2_IRQHandler(void); void USART1_IRQHandler(void); void USART2_IRQHandler(void); void USART3_IRQHandler(void); -void DMA1_Stream7_IRQHandler(void); void UART4_IRQHandler(void); -void UART5_IRQHandler(void); void DMA2_Stream0_IRQHandler(void); void DMA2_Stream1_IRQHandler(void); void DMA2_Stream2_IRQHandler(void); +void DMA2_Stream3_IRQHandler(void); void DMA2_Stream4_IRQHandler(void); +void DMA2_Stream5_IRQHandler(void); void DMA2_Stream6_IRQHandler(void); void DMA2_Stream7_IRQHandler(void); void USART6_IRQHandler(void); diff --git a/Inc/usart.h b/Inc/usart.h index d3b24f9..3c42e61 100644 --- a/Inc/usart.h +++ b/Inc/usart.h @@ -9,10 +9,10 @@ *

© Copyright (c) 2019 STMicroelectronics. * All rights reserved.

* - * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the - * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause + * This software component is licensed by ST under Ultimate Liberty license + * SLA0044, the "License"; You may not use this file except in compliance with + * the License. You may obtain a copy of the License at: + * www.st.com/SLA0044 * ****************************************************************************** */ @@ -35,7 +35,6 @@ /* USER CODE END Private defines */ void MX_UART4_Init(void); -void MX_UART5_Init(void); void MX_USART1_UART_Init(void); void MX_USART2_UART_Init(void); void MX_USART3_UART_Init(void); diff --git a/Inc/usb_otg.h b/Inc/usb_otg.h new file mode 100644 index 0000000..2c6261f --- /dev/null +++ b/Inc/usb_otg.h @@ -0,0 +1,58 @@ +/** + ****************************************************************************** + * File Name : USB_OTG.h + * Description : This file provides code for the configuration + * of the USB_OTG instances. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2019 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under Ultimate Liberty license + * SLA0044, the "License"; You may not use this file except in compliance with + * the License. You may obtain a copy of the License at: + * www.st.com/SLA0044 + * + ****************************************************************************** + */ +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __usb_otg_H +#define __usb_otg_H +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "main.h" + +/* USER CODE BEGIN Includes */ + +/* USER CODE END Includes */ + +extern PCD_HandleTypeDef hpcd_USB_OTG_FS; + +/* USER CODE BEGIN Private defines */ + +/* USER CODE END Private defines */ + +void MX_USB_OTG_FS_PCD_Init(void); + +/* USER CODE BEGIN Prototypes */ + +/* USER CODE END Prototypes */ + +#ifdef __cplusplus +} +#endif +#endif /*__ usb_otg_H */ + +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/Middlewares/Third_Party/FatFs/src/diskio.c b/Middlewares/Third_Party/FatFs/src/diskio.c new file mode 100644 index 0000000..09a0db5 --- /dev/null +++ b/Middlewares/Third_Party/FatFs/src/diskio.c @@ -0,0 +1,181 @@ +/*-----------------------------------------------------------------------*/ +/* Low level disk I/O module skeleton for FatFs (C)ChaN, 2017 */ +/* */ +/* Portions COPYRIGHT 2017 STMicroelectronics */ +/* Portions Copyright (C) 2017, ChaN, all right reserved */ +/*-----------------------------------------------------------------------*/ +/* If a working storage control module is available, it should be */ +/* attached to the FatFs via a glue function rather than modifying it. */ +/* This is an example of glue functions to attach various existing */ +/* storage control modules to the FatFs module with a defined API. */ +/*-----------------------------------------------------------------------*/ + +/** + ****************************************************************************** + * + *

© Copyright (c) 2017 STMicroelectronics International N.V. + * All rights reserved.

+ * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted, provided that the following conditions are met: + * + * 1. Redistribution of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of other + * contributors to this software may be used to endorse or promote products + * derived from this software without specific written permission. + * 4. This software, including modifications and/or derivative works of this + * software, must execute solely and exclusively on microcontroller or + * microprocessor devices manufactured by or for STMicroelectronics. + * 5. Redistribution and use of this software other than as permitted under + * this license is void and will automatically terminate your rights under + * this license. + * + * THIS SOFTWARE IS PROVIDED BY STMICROELECTRONICS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS, IMPLIED OR STATUTORY WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A + * PARTICULAR PURPOSE AND NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY + * RIGHTS ARE DISCLAIMED TO THE FULLEST EXTENT PERMITTED BY LAW. IN NO EVENT + * SHALL STMICROELECTRONICS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, + * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF + * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING + * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, + * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "diskio.h" +#include "ff_gen_drv.h" + +#if defined ( __GNUC__ ) +#ifndef __weak +#define __weak __attribute__((weak)) +#endif +#endif + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +extern Disk_drvTypeDef disk; + +/* Private function prototypes -----------------------------------------------*/ +/* Private functions ---------------------------------------------------------*/ + +/** + * @brief Gets Disk Status + * @param pdrv: Physical drive number (0..) + * @retval DSTATUS: Operation status + */ +DSTATUS disk_status ( + BYTE pdrv /* Physical drive number to identify the drive */ +) +{ + DSTATUS stat; + + stat = disk.drv[pdrv]->disk_status(disk.lun[pdrv]); + return stat; +} + +/** + * @brief Initializes a Drive + * @param pdrv: Physical drive number (0..) + * @retval DSTATUS: Operation status + */ +DSTATUS disk_initialize ( + BYTE pdrv /* Physical drive nmuber to identify the drive */ +) +{ + DSTATUS stat = RES_OK; + + if(disk.is_initialized[pdrv] == 0) + { + disk.is_initialized[pdrv] = 1; + stat = disk.drv[pdrv]->disk_initialize(disk.lun[pdrv]); + } + return stat; +} + +/** + * @brief Reads Sector(s) + * @param pdrv: Physical drive number (0..) + * @param *buff: Data buffer to store read data + * @param sector: Sector address (LBA) + * @param count: Number of sectors to read (1..128) + * @retval DRESULT: Operation result + */ +DRESULT disk_read ( + BYTE pdrv, /* Physical drive nmuber to identify the drive */ + BYTE *buff, /* Data buffer to store read data */ + DWORD sector, /* Sector address in LBA */ + UINT count /* Number of sectors to read */ +) +{ + DRESULT res; + + res = disk.drv[pdrv]->disk_read(disk.lun[pdrv], buff, sector, count); + return res; +} + +/** + * @brief Writes Sector(s) + * @param pdrv: Physical drive number (0..) + * @param *buff: Data to be written + * @param sector: Sector address (LBA) + * @param count: Number of sectors to write (1..128) + * @retval DRESULT: Operation result + */ +#if _USE_WRITE == 1 +DRESULT disk_write ( + BYTE pdrv, /* Physical drive nmuber to identify the drive */ + const BYTE *buff, /* Data to be written */ + DWORD sector, /* Sector address in LBA */ + UINT count /* Number of sectors to write */ +) +{ + DRESULT res; + + res = disk.drv[pdrv]->disk_write(disk.lun[pdrv], buff, sector, count); + return res; +} +#endif /* _USE_WRITE == 1 */ + +/** + * @brief I/O control operation + * @param pdrv: Physical drive number (0..) + * @param cmd: Control code + * @param *buff: Buffer to send/receive control data + * @retval DRESULT: Operation result + */ +#if _USE_IOCTL == 1 +DRESULT disk_ioctl ( + BYTE pdrv, /* Physical drive nmuber (0..) */ + BYTE cmd, /* Control code */ + void *buff /* Buffer to send/receive control data */ +) +{ + DRESULT res; + + res = disk.drv[pdrv]->disk_ioctl(disk.lun[pdrv], cmd, buff); + return res; +} +#endif /* _USE_IOCTL == 1 */ + +/** + * @brief Gets Time from RTC + * @param None + * @retval Time in DWORD + */ +__weak DWORD get_fattime (void) +{ + return 0; +} + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ + diff --git a/Middlewares/Third_Party/FatFs/src/diskio.h b/Middlewares/Third_Party/FatFs/src/diskio.h new file mode 100644 index 0000000..7a417d9 --- /dev/null +++ b/Middlewares/Third_Party/FatFs/src/diskio.h @@ -0,0 +1,80 @@ +/*-----------------------------------------------------------------------/ +/ Low level disk interface modlue include file (C)ChaN, 2014 / +/-----------------------------------------------------------------------*/ + +#ifndef _DISKIO_DEFINED +#define _DISKIO_DEFINED + +#ifdef __cplusplus +extern "C" { +#endif + +#define _USE_WRITE 1 /* 1: Enable disk_write function */ +#define _USE_IOCTL 1 /* 1: Enable disk_ioctl function */ + +#include "integer.h" + + +/* Status of Disk Functions */ +typedef BYTE DSTATUS; + +/* Results of Disk Functions */ +typedef enum { + RES_OK = 0, /* 0: Successful */ + RES_ERROR, /* 1: R/W Error */ + RES_WRPRT, /* 2: Write Protected */ + RES_NOTRDY, /* 3: Not Ready */ + RES_PARERR /* 4: Invalid Parameter */ +} DRESULT; + + +/*---------------------------------------*/ +/* Prototypes for disk control functions */ + + +DSTATUS disk_initialize (BYTE pdrv); +DSTATUS disk_status (BYTE pdrv); +DRESULT disk_read (BYTE pdrv, BYTE* buff, DWORD sector, UINT count); +DRESULT disk_write (BYTE pdrv, const BYTE* buff, DWORD sector, UINT count); +DRESULT disk_ioctl (BYTE pdrv, BYTE cmd, void* buff); +DWORD get_fattime (void); + +/* Disk Status Bits (DSTATUS) */ + +#define STA_NOINIT 0x01 /* Drive not initialized */ +#define STA_NODISK 0x02 /* No medium in the drive */ +#define STA_PROTECT 0x04 /* Write protected */ + + +/* Command code for disk_ioctrl fucntion */ + +/* Generic command (Used by FatFs) */ +#define CTRL_SYNC 0 /* Complete pending write process (needed at _FS_READONLY == 0) */ +#define GET_SECTOR_COUNT 1 /* Get media size (needed at _USE_MKFS == 1) */ +#define GET_SECTOR_SIZE 2 /* Get sector size (needed at _MAX_SS != _MIN_SS) */ +#define GET_BLOCK_SIZE 3 /* Get erase block size (needed at _USE_MKFS == 1) */ +#define CTRL_TRIM 4 /* Inform device that the data on the block of sectors is no longer used (needed at _USE_TRIM == 1) */ + +/* Generic command (Not used by FatFs) */ +#define CTRL_POWER 5 /* Get/Set power status */ +#define CTRL_LOCK 6 /* Lock/Unlock media removal */ +#define CTRL_EJECT 7 /* Eject media */ +#define CTRL_FORMAT 8 /* Create physical format on the media */ + +/* MMC/SDC specific ioctl command */ +#define MMC_GET_TYPE 10 /* Get card type */ +#define MMC_GET_CSD 11 /* Get CSD */ +#define MMC_GET_CID 12 /* Get CID */ +#define MMC_GET_OCR 13 /* Get OCR */ +#define MMC_GET_SDSTAT 14 /* Get SD status */ + +/* ATA/CF specific ioctl command */ +#define ATA_GET_REV 20 /* Get F/W revision */ +#define ATA_GET_MODEL 21 /* Get model name */ +#define ATA_GET_SN 22 /* Get serial number */ + +#ifdef __cplusplus +} +#endif + +#endif diff --git a/Middlewares/Third_Party/FatFs/src/ff.c b/Middlewares/Third_Party/FatFs/src/ff.c new file mode 100644 index 0000000..253de3c --- /dev/null +++ b/Middlewares/Third_Party/FatFs/src/ff.c @@ -0,0 +1,6140 @@ +/*----------------------------------------------------------------------------/ +/ FatFs - Generic FAT file system module R0.12c / +/-----------------------------------------------------------------------------/ +/ +/ Copyright (C) 2017, ChaN, all right reserved. +/ +/ FatFs module is an open source software. Redistribution and use of FatFs in +/ source and binary forms, with or without modification, are permitted provided +/ that the following condition is met: +/ +/ 1. Redistributions of source code must retain the above copyright notice, +/ this condition and the following disclaimer. +/ +/ This software is provided by the copyright holder and contributors "AS IS" +/ and any warranties related to this software are DISCLAIMED. +/ The copyright owner or contributors be NOT LIABLE for any damages caused +/ by use of this software. +/----------------------------------------------------------------------------*/ + + +#include "ff.h" /* Declarations of FatFs API */ +#include "diskio.h" /* Declarations of device I/O functions */ + + +/*-------------------------------------------------------------------------- + + Module Private Definitions + +---------------------------------------------------------------------------*/ + +#if _FATFS != 68300 /* Revision ID */ +#error Wrong include file (ff.h). +#endif + + +/* DBCS code ranges and SBCS upper conversion tables */ + +#if _CODE_PAGE == 932 /* Japanese Shift-JIS */ +#define _DF1S 0x81 /* DBC 1st byte range 1 start */ +#define _DF1E 0x9F /* DBC 1st byte range 1 end */ +#define _DF2S 0xE0 /* DBC 1st byte range 2 start */ +#define _DF2E 0xFC /* DBC 1st byte range 2 end */ +#define _DS1S 0x40 /* DBC 2nd byte range 1 start */ +#define _DS1E 0x7E /* DBC 2nd byte range 1 end */ +#define _DS2S 0x80 /* DBC 2nd byte range 2 start */ +#define _DS2E 0xFC /* DBC 2nd byte range 2 end */ + +#elif _CODE_PAGE == 936 /* Simplified Chinese GBK */ +#define _DF1S 0x81 +#define _DF1E 0xFE +#define _DS1S 0x40 +#define _DS1E 0x7E +#define _DS2S 0x80 +#define _DS2E 0xFE + +#elif _CODE_PAGE == 949 /* Korean */ +#define _DF1S 0x81 +#define _DF1E 0xFE +#define _DS1S 0x41 +#define _DS1E 0x5A +#define _DS2S 0x61 +#define _DS2E 0x7A +#define _DS3S 0x81 +#define _DS3E 0xFE + +#elif _CODE_PAGE == 950 /* Traditional Chinese Big5 */ +#define _DF1S 0x81 +#define _DF1E 0xFE +#define _DS1S 0x40 +#define _DS1E 0x7E +#define _DS2S 0xA1 +#define _DS2E 0xFE + +#elif _CODE_PAGE == 437 /* U.S. */ +#define _DF1S 0 +#define _EXCVT {0x80,0x9A,0x45,0x41,0x8E,0x41,0x8F,0x80,0x45,0x45,0x45,0x49,0x49,0x49,0x8E,0x8F, \ + 0x90,0x92,0x92,0x4F,0x99,0x4F,0x55,0x55,0x59,0x99,0x9A,0x9B,0x9C,0x9D,0x9E,0x9F, \ + 0x41,0x49,0x4F,0x55,0xA5,0xA5,0xA6,0xA7,0xA8,0xA9,0xAA,0xAB,0xAC,0xAD,0xAE,0xAF, \ + 0xB0,0xB1,0xB2,0xB3,0xB4,0xB5,0xB6,0xB7,0xB8,0xB9,0xBA,0xBB,0xBC,0xBD,0xBE,0xBF, \ + 0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF, \ + 0xD0,0xD1,0xD2,0xD3,0xD4,0xD5,0xD6,0xD7,0xD8,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0xDF, \ + 0xE0,0xE1,0xE2,0xE3,0xE4,0xE5,0xE6,0xE7,0xE8,0xE9,0xEA,0xEB,0xEC,0xED,0xEE,0xEF, \ + 0xF0,0xF1,0xF2,0xF3,0xF4,0xF5,0xF6,0xF7,0xF8,0xF9,0xFA,0xFB,0xFC,0xFD,0xFE,0xFF} + +#elif _CODE_PAGE == 720 /* Arabic */ +#define _DF1S 0 +#define _EXCVT {0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87,0x88,0x89,0x8A,0x8B,0x8C,0x8D,0x8E,0x8F, \ + 0x90,0x91,0x92,0x93,0x94,0x95,0x96,0x97,0x98,0x99,0x9A,0x9B,0x9C,0x9D,0x9E,0x9F, \ + 0xA0,0xA1,0xA2,0xA3,0xA4,0xA5,0xA6,0xA7,0xA8,0xA9,0xAA,0xAB,0xAC,0xAD,0xAE,0xAF, \ + 0xB0,0xB1,0xB2,0xB3,0xB4,0xB5,0xB6,0xB7,0xB8,0xB9,0xBA,0xBB,0xBC,0xBD,0xBE,0xBF, \ + 0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF, \ + 0xD0,0xD1,0xD2,0xD3,0xD4,0xD5,0xD6,0xD7,0xD8,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0xDF, \ + 0xE0,0xE1,0xE2,0xE3,0xE4,0xE5,0xE6,0xE7,0xE8,0xE9,0xEA,0xEB,0xEC,0xED,0xEE,0xEF, \ + 0xF0,0xF1,0xF2,0xF3,0xF4,0xF5,0xF6,0xF7,0xF8,0xF9,0xFA,0xFB,0xFC,0xFD,0xFE,0xFF} + +#elif _CODE_PAGE == 737 /* Greek */ +#define _DF1S 0 +#define _EXCVT {0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87,0x88,0x89,0x8A,0x8B,0x8C,0x8D,0x8E,0x8F, \ + 0x90,0x92,0x92,0x93,0x94,0x95,0x96,0x97,0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87, \ + 0x88,0x89,0x8A,0x8B,0x8C,0x8D,0x8E,0x8F,0x90,0x91,0xAA,0x92,0x93,0x94,0x95,0x96, \ + 0xB0,0xB1,0xB2,0xB3,0xB4,0xB5,0xB6,0xB7,0xB8,0xB9,0xBA,0xBB,0xBC,0xBD,0xBE,0xBF, \ + 0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF, \ + 0xD0,0xD1,0xD2,0xD3,0xD4,0xD5,0xD6,0xD7,0xD8,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0xDF, \ + 0x97,0xEA,0xEB,0xEC,0xE4,0xED,0xEE,0xEF,0xF5,0xF0,0xEA,0xEB,0xEC,0xED,0xEE,0xEF, \ + 0xF0,0xF1,0xF2,0xF3,0xF4,0xF5,0xF6,0xF7,0xF8,0xF9,0xFA,0xFB,0xFC,0xFD,0xFE,0xFF} + +#elif _CODE_PAGE == 771 /* KBL */ +#define _DF1S 0 +#define _EXCVT {0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87,0x88,0x89,0x8A,0x8B,0x8C,0x8D,0x8E,0x8F, \ + 0x90,0x91,0x92,0x93,0x94,0x95,0x96,0x97,0x98,0x99,0x9A,0x9B,0x9C,0x9D,0x9E,0x9F, \ + 0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87,0x88,0x89,0x8A,0x8B,0x8C,0x8D,0x8E,0x8F, \ + 0xB0,0xB1,0xB2,0xB3,0xB4,0xB5,0xB6,0xB7,0xB8,0xB9,0xBA,0xBB,0xBC,0xBD,0xBE,0xBF, \ + 0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF, \ + 0xD0,0xD1,0xD2,0xD3,0xD4,0xD5,0xD6,0xD7,0xD8,0xD9,0xDA,0xDB,0xDC,0xDC,0xDE,0xDE, \ + 0x90,0x91,0x92,0x93,0x94,0x95,0x96,0x97,0x98,0x99,0x9A,0x9B,0x9C,0x9D,0x9E,0x9F, \ + 0xF0,0xF0,0xF2,0xF2,0xF4,0xF4,0xF6,0xF6,0xF8,0xF8,0xFA,0xFA,0xFC,0xFC,0xFE,0xFF} + +#elif _CODE_PAGE == 775 /* Baltic */ +#define _DF1S 0 +#define _EXCVT {0x80,0x9A,0x91,0xA0,0x8E,0x95,0x8F,0x80,0xAD,0xED,0x8A,0x8A,0xA1,0x8D,0x8E,0x8F, \ + 0x90,0x92,0x92,0xE2,0x99,0x95,0x96,0x97,0x97,0x99,0x9A,0x9D,0x9C,0x9D,0x9E,0x9F, \ + 0xA0,0xA1,0xE0,0xA3,0xA3,0xA5,0xA6,0xA7,0xA8,0xA9,0xAA,0xAB,0xAC,0xAD,0xAE,0xAF, \ + 0xB0,0xB1,0xB2,0xB3,0xB4,0xB5,0xB6,0xB7,0xB8,0xB9,0xBA,0xBB,0xBC,0xBD,0xBE,0xBF, \ + 0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF, \ + 0xB5,0xB6,0xB7,0xB8,0xBD,0xBE,0xC6,0xC7,0xA5,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0xDF, \ + 0xE0,0xE1,0xE2,0xE3,0xE5,0xE5,0xE6,0xE3,0xE8,0xE8,0xEA,0xEA,0xEE,0xED,0xEE,0xEF, \ + 0xF0,0xF1,0xF2,0xF3,0xF4,0xF5,0xF6,0xF7,0xF8,0xF9,0xFA,0xFB,0xFC,0xFD,0xFE,0xFF} + +#elif _CODE_PAGE == 850 /* Latin 1 */ +#define _DF1S 0 +#define _EXCVT {0x43,0x55,0x45,0x41,0x41,0x41,0x41,0x43,0x45,0x45,0x45,0x49,0x49,0x49,0x41,0x41, \ + 0x45,0x92,0x92,0x4F,0x4F,0x4F,0x55,0x55,0x59,0x4F,0x55,0x4F,0x9C,0x4F,0x9E,0x9F, \ + 0x41,0x49,0x4F,0x55,0xA5,0xA5,0xA6,0xA7,0xA8,0xA9,0xAA,0xAB,0xAC,0xAD,0xAE,0xAF, \ + 0xB0,0xB1,0xB2,0xB3,0xB4,0x41,0x41,0x41,0xB8,0xB9,0xBA,0xBB,0xBC,0xBD,0xBE,0xBF, \ + 0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0x41,0x41,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF, \ + 0xD1,0xD1,0x45,0x45,0x45,0x49,0x49,0x49,0x49,0xD9,0xDA,0xDB,0xDC,0xDD,0x49,0xDF, \ + 0x4F,0xE1,0x4F,0x4F,0x4F,0x4F,0xE6,0xE8,0xE8,0x55,0x55,0x55,0x59,0x59,0xEE,0xEF, \ + 0xF0,0xF1,0xF2,0xF3,0xF4,0xF5,0xF6,0xF7,0xF8,0xF9,0xFA,0xFB,0xFC,0xFD,0xFE,0xFF} + +#elif _CODE_PAGE == 852 /* Latin 2 */ +#define _DF1S 0 +#define _EXCVT {0x80,0x9A,0x90,0xB6,0x8E,0xDE,0x8F,0x80,0x9D,0xD3,0x8A,0x8A,0xD7,0x8D,0x8E,0x8F, \ + 0x90,0x91,0x91,0xE2,0x99,0x95,0x95,0x97,0x97,0x99,0x9A,0x9B,0x9B,0x9D,0x9E,0xAC, \ + 0xB5,0xD6,0xE0,0xE9,0xA4,0xA4,0xA6,0xA6,0xA8,0xA8,0xAA,0x8D,0xAC,0xB8,0xAE,0xAF, \ + 0xB0,0xB1,0xB2,0xB3,0xB4,0xB5,0xB6,0xB7,0xB8,0xB9,0xBA,0xBB,0xBC,0xBD,0xBD,0xBF, \ + 0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC6,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF, \ + 0xD1,0xD1,0xD2,0xD3,0xD2,0xD5,0xD6,0xD7,0xB7,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0xDF, \ + 0xE0,0xE1,0xE2,0xE3,0xE3,0xD5,0xE6,0xE6,0xE8,0xE9,0xE8,0xEB,0xED,0xED,0xDD,0xEF, \ + 0xF0,0xF1,0xF2,0xF3,0xF4,0xF5,0xF6,0xF7,0xF8,0xF9,0xFA,0xEB,0xFC,0xFC,0xFE,0xFF} + +#elif _CODE_PAGE == 855 /* Cyrillic */ +#define _DF1S 0 +#define _EXCVT {0x81,0x81,0x83,0x83,0x85,0x85,0x87,0x87,0x89,0x89,0x8B,0x8B,0x8D,0x8D,0x8F,0x8F, \ + 0x91,0x91,0x93,0x93,0x95,0x95,0x97,0x97,0x99,0x99,0x9B,0x9B,0x9D,0x9D,0x9F,0x9F, \ + 0xA1,0xA1,0xA3,0xA3,0xA5,0xA5,0xA7,0xA7,0xA9,0xA9,0xAB,0xAB,0xAD,0xAD,0xAE,0xAF, \ + 0xB0,0xB1,0xB2,0xB3,0xB4,0xB6,0xB6,0xB8,0xB8,0xB9,0xBA,0xBB,0xBC,0xBE,0xBE,0xBF, \ + 0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC7,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF, \ + 0xD1,0xD1,0xD3,0xD3,0xD5,0xD5,0xD7,0xD7,0xDD,0xD9,0xDA,0xDB,0xDC,0xDD,0xE0,0xDF, \ + 0xE0,0xE2,0xE2,0xE4,0xE4,0xE6,0xE6,0xE8,0xE8,0xEA,0xEA,0xEC,0xEC,0xEE,0xEE,0xEF, \ + 0xF0,0xF2,0xF2,0xF4,0xF4,0xF6,0xF6,0xF8,0xF8,0xFA,0xFA,0xFC,0xFC,0xFD,0xFE,0xFF} + +#elif _CODE_PAGE == 857 /* Turkish */ +#define _DF1S 0 +#define _EXCVT {0x80,0x9A,0x90,0xB6,0x8E,0xB7,0x8F,0x80,0xD2,0xD3,0xD4,0xD8,0xD7,0x49,0x8E,0x8F, \ + 0x90,0x92,0x92,0xE2,0x99,0xE3,0xEA,0xEB,0x98,0x99,0x9A,0x9D,0x9C,0x9D,0x9E,0x9E, \ + 0xB5,0xD6,0xE0,0xE9,0xA5,0xA5,0xA6,0xA6,0xA8,0xA9,0xAA,0xAB,0xAC,0xAD,0xAE,0xAF, \ + 0xB0,0xB1,0xB2,0xB3,0xB4,0xB5,0xB6,0xB7,0xB8,0xB9,0xBA,0xBB,0xBC,0xBD,0xBE,0xBF, \ + 0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC7,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF, \ + 0xD0,0xD1,0xD2,0xD3,0xD4,0x49,0xD6,0xD7,0xD8,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0xDF, \ + 0xE0,0xE1,0xE2,0xE3,0xE5,0xE5,0xE6,0xE7,0xE8,0xE9,0xEA,0xEB,0xDE,0xED,0xEE,0xEF, \ + 0xF0,0xF1,0xF2,0xF3,0xF4,0xF5,0xF6,0xF7,0xF8,0xF9,0xFA,0xFB,0xFC,0xFD,0xFE,0xFF} + +#elif _CODE_PAGE == 860 /* Portuguese */ +#define _DF1S 0 +#define _EXCVT {0x80,0x9A,0x90,0x8F,0x8E,0x91,0x86,0x80,0x89,0x89,0x92,0x8B,0x8C,0x98,0x8E,0x8F, \ + 0x90,0x91,0x92,0x8C,0x99,0xA9,0x96,0x9D,0x98,0x99,0x9A,0x9B,0x9C,0x9D,0x9E,0x9F, \ + 0x86,0x8B,0x9F,0x96,0xA5,0xA5,0xA6,0xA7,0xA8,0xA9,0xAA,0xAB,0xAC,0xAD,0xAE,0xAF, \ + 0xB0,0xB1,0xB2,0xB3,0xB4,0xB5,0xB6,0xB7,0xB8,0xB9,0xBA,0xBB,0xBC,0xBD,0xBE,0xBF, \ + 0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF, \ + 0xD0,0xD1,0xD2,0xD3,0xD4,0xD5,0xD6,0xD7,0xD8,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0xDF, \ + 0xE0,0xE1,0xE2,0xE3,0xE4,0xE5,0xE6,0xE7,0xE8,0xE9,0xEA,0xEB,0xEC,0xED,0xEE,0xEF, \ + 0xF0,0xF1,0xF2,0xF3,0xF4,0xF5,0xF6,0xF7,0xF8,0xF9,0xFA,0xFB,0xFC,0xFD,0xFE,0xFF} + +#elif _CODE_PAGE == 861 /* Icelandic */ +#define _DF1S 0 +#define _EXCVT {0x80,0x9A,0x90,0x41,0x8E,0x41,0x8F,0x80,0x45,0x45,0x45,0x8B,0x8B,0x8D,0x8E,0x8F, \ + 0x90,0x92,0x92,0x4F,0x99,0x8D,0x55,0x97,0x97,0x99,0x9A,0x9D,0x9C,0x9D,0x9E,0x9F, \ + 0xA4,0xA5,0xA6,0xA7,0xA4,0xA5,0xA6,0xA7,0xA8,0xA9,0xAA,0xAB,0xAC,0xAD,0xAE,0xAF, \ + 0xB0,0xB1,0xB2,0xB3,0xB4,0xB5,0xB6,0xB7,0xB8,0xB9,0xBA,0xBB,0xBC,0xBD,0xBE,0xBF, \ + 0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF, \ + 0xD0,0xD1,0xD2,0xD3,0xD4,0xD5,0xD6,0xD7,0xD8,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0xDF, \ + 0xE0,0xE1,0xE2,0xE3,0xE4,0xE5,0xE6,0xE7,0xE8,0xE9,0xEA,0xEB,0xEC,0xED,0xEE,0xEF, \ + 0xF0,0xF1,0xF2,0xF3,0xF4,0xF5,0xF6,0xF7,0xF8,0xF9,0xFA,0xFB,0xFC,0xFD,0xFE,0xFF} + +#elif _CODE_PAGE == 862 /* Hebrew */ +#define _DF1S 0 +#define _EXCVT {0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87,0x88,0x89,0x8A,0x8B,0x8C,0x8D,0x8E,0x8F, \ + 0x90,0x91,0x92,0x93,0x94,0x95,0x96,0x97,0x98,0x99,0x9A,0x9B,0x9C,0x9D,0x9E,0x9F, \ + 0x41,0x49,0x4F,0x55,0xA5,0xA5,0xA6,0xA7,0xA8,0xA9,0xAA,0xAB,0xAC,0xAD,0xAE,0xAF, \ + 0xB0,0xB1,0xB2,0xB3,0xB4,0xB5,0xB6,0xB7,0xB8,0xB9,0xBA,0xBB,0xBC,0xBD,0xBE,0xBF, \ + 0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF, \ + 0xD0,0xD1,0xD2,0xD3,0xD4,0xD5,0xD6,0xD7,0xD8,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0xDF, \ + 0xE0,0xE1,0xE2,0xE3,0xE4,0xE5,0xE6,0xE7,0xE8,0xE9,0xEA,0xEB,0xEC,0xED,0xEE,0xEF, \ + 0xF0,0xF1,0xF2,0xF3,0xF4,0xF5,0xF6,0xF7,0xF8,0xF9,0xFA,0xFB,0xFC,0xFD,0xFE,0xFF} + +#elif _CODE_PAGE == 863 /* Canadian-French */ +#define _DF1S 0 +#define _EXCVT {0x43,0x55,0x45,0x41,0x41,0x41,0x86,0x43,0x45,0x45,0x45,0x49,0x49,0x8D,0x41,0x8F, \ + 0x45,0x45,0x45,0x4F,0x45,0x49,0x55,0x55,0x98,0x4F,0x55,0x9B,0x9C,0x55,0x55,0x9F, \ + 0xA0,0xA1,0x4F,0x55,0xA4,0xA5,0xA6,0xA7,0x49,0xA9,0xAA,0xAB,0xAC,0xAD,0xAE,0xAF, \ + 0xB0,0xB1,0xB2,0xB3,0xB4,0xB5,0xB6,0xB7,0xB8,0xB9,0xBA,0xBB,0xBC,0xBD,0xBE,0xBF, \ + 0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF, \ + 0xD0,0xD1,0xD2,0xD3,0xD4,0xD5,0xD6,0xD7,0xD8,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0xDF, \ + 0xE0,0xE1,0xE2,0xE3,0xE4,0xE5,0xE6,0xE7,0xE8,0xE9,0xEA,0xEB,0xEC,0xED,0xEE,0xEF, \ + 0xF0,0xF1,0xF2,0xF3,0xF4,0xF5,0xF6,0xF7,0xF8,0xF9,0xFA,0xFB,0xFC,0xFD,0xFE,0xFF} + +#elif _CODE_PAGE == 864 /* Arabic */ +#define _DF1S 0 +#define _EXCVT {0x80,0x9A,0x45,0x41,0x8E,0x41,0x8F,0x80,0x45,0x45,0x45,0x49,0x49,0x49,0x8E,0x8F, \ + 0x90,0x92,0x92,0x4F,0x99,0x4F,0x55,0x55,0x59,0x99,0x9A,0x9B,0x9C,0x9D,0x9E,0x9F, \ + 0x41,0x49,0x4F,0x55,0xA5,0xA5,0xA6,0xA7,0xA8,0xA9,0xAA,0xAB,0xAC,0xAD,0xAE,0xAF, \ + 0xB0,0xB1,0xB2,0xB3,0xB4,0xB5,0xB6,0xB7,0xB8,0xB9,0xBA,0xBB,0xBC,0xBD,0xBE,0xBF, \ + 0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF, \ + 0xD0,0xD1,0xD2,0xD3,0xD4,0xD5,0xD6,0xD7,0xD8,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0xDF, \ + 0xE0,0xE1,0xE2,0xE3,0xE4,0xE5,0xE6,0xE7,0xE8,0xE9,0xEA,0xEB,0xEC,0xED,0xEE,0xEF, \ + 0xF0,0xF1,0xF2,0xF3,0xF4,0xF5,0xF6,0xF7,0xF8,0xF9,0xFA,0xFB,0xFC,0xFD,0xFE,0xFF} + +#elif _CODE_PAGE == 865 /* Nordic */ +#define _DF1S 0 +#define _EXCVT {0x80,0x9A,0x90,0x41,0x8E,0x41,0x8F,0x80,0x45,0x45,0x45,0x49,0x49,0x49,0x8E,0x8F, \ + 0x90,0x92,0x92,0x4F,0x99,0x4F,0x55,0x55,0x59,0x99,0x9A,0x9B,0x9C,0x9D,0x9E,0x9F, \ + 0x41,0x49,0x4F,0x55,0xA5,0xA5,0xA6,0xA7,0xA8,0xA9,0xAA,0xAB,0xAC,0xAD,0xAE,0xAF, \ + 0xB0,0xB1,0xB2,0xB3,0xB4,0xB5,0xB6,0xB7,0xB8,0xB9,0xBA,0xBB,0xBC,0xBD,0xBE,0xBF, \ + 0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF, \ + 0xD0,0xD1,0xD2,0xD3,0xD4,0xD5,0xD6,0xD7,0xD8,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0xDF, \ + 0xE0,0xE1,0xE2,0xE3,0xE4,0xE5,0xE6,0xE7,0xE8,0xE9,0xEA,0xEB,0xEC,0xED,0xEE,0xEF, \ + 0xF0,0xF1,0xF2,0xF3,0xF4,0xF5,0xF6,0xF7,0xF8,0xF9,0xFA,0xFB,0xFC,0xFD,0xFE,0xFF} + +#elif _CODE_PAGE == 866 /* Russian */ +#define _DF1S 0 +#define _EXCVT {0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87,0x88,0x89,0x8A,0x8B,0x8C,0x8D,0x8E,0x8F, \ + 0x90,0x91,0x92,0x93,0x94,0x95,0x96,0x97,0x98,0x99,0x9A,0x9B,0x9C,0x9D,0x9E,0x9F, \ + 0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87,0x88,0x89,0x8A,0x8B,0x8C,0x8D,0x8E,0x8F, \ + 0xB0,0xB1,0xB2,0xB3,0xB4,0xB5,0xB6,0xB7,0xB8,0xB9,0xBA,0xBB,0xBC,0xBD,0xBE,0xBF, \ + 0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF, \ + 0xD0,0xD1,0xD2,0xD3,0xD4,0xD5,0xD6,0xD7,0xD8,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0xDF, \ + 0x90,0x91,0x92,0x93,0x94,0x95,0x96,0x97,0x98,0x99,0x9A,0x9B,0x9C,0x9D,0x9E,0x9F, \ + 0xF0,0xF0,0xF2,0xF2,0xF4,0xF4,0xF6,0xF6,0xF8,0xF9,0xFA,0xFB,0xFC,0xFD,0xFE,0xFF} + +#elif _CODE_PAGE == 869 /* Greek 2 */ +#define _DF1S 0 +#define _EXCVT {0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87,0x88,0x89,0x8A,0x8B,0x8C,0x8D,0x8E,0x8F, \ + 0x90,0x91,0x92,0x93,0x94,0x95,0x96,0x97,0x98,0x99,0x9A,0x86,0x9C,0x8D,0x8F,0x90, \ + 0x91,0x90,0x92,0x95,0xA4,0xA5,0xA6,0xA7,0xA8,0xA9,0xAA,0xAB,0xAC,0xAD,0xAE,0xAF, \ + 0xB0,0xB1,0xB2,0xB3,0xB4,0xB5,0xB6,0xB7,0xB8,0xB9,0xBA,0xBB,0xBC,0xBD,0xBE,0xBF, \ + 0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF, \ + 0xD0,0xD1,0xD2,0xD3,0xD4,0xD5,0xA4,0xA5,0xA6,0xD9,0xDA,0xDB,0xDC,0xA7,0xA8,0xDF, \ + 0xA9,0xAA,0xAC,0xAD,0xB5,0xB6,0xB7,0xB8,0xBD,0xBE,0xC6,0xC7,0xCF,0xCF,0xD0,0xEF, \ + 0xF0,0xF1,0xD1,0xD2,0xD3,0xF5,0xD4,0xF7,0xF8,0xF9,0xD5,0x96,0x95,0x98,0xFE,0xFF} + +#elif _CODE_PAGE == 1 /* ASCII (for only non-LFN cfg) */ +#if _USE_LFN != 0 +#error Cannot enable LFN without valid code page. +#endif +#define _DF1S 0 + +#else +#error Unknown code page + +#endif + + +/* Character code support macros */ +#define IsUpper(c) (((c)>='A')&&((c)<='Z')) +#define IsLower(c) (((c)>='a')&&((c)<='z')) +#define IsDigit(c) (((c)>='0')&&((c)<='9')) + +#if _DF1S != 0 /* Code page is DBCS */ + +#ifdef _DF2S /* Two 1st byte areas */ +#define IsDBCS1(c) (((BYTE)(c) >= _DF1S && (BYTE)(c) <= _DF1E) || ((BYTE)(c) >= _DF2S && (BYTE)(c) <= _DF2E)) +#else /* One 1st byte area */ +#define IsDBCS1(c) ((BYTE)(c) >= _DF1S && (BYTE)(c) <= _DF1E) +#endif + +#ifdef _DS3S /* Three 2nd byte areas */ +#define IsDBCS2(c) (((BYTE)(c) >= _DS1S && (BYTE)(c) <= _DS1E) || ((BYTE)(c) >= _DS2S && (BYTE)(c) <= _DS2E) || ((BYTE)(c) >= _DS3S && (BYTE)(c) <= _DS3E)) +#else /* Two 2nd byte areas */ +#define IsDBCS2(c) (((BYTE)(c) >= _DS1S && (BYTE)(c) <= _DS1E) || ((BYTE)(c) >= _DS2S && (BYTE)(c) <= _DS2E)) +#endif + +#else /* Code page is SBCS */ + +#define IsDBCS1(c) 0 +#define IsDBCS2(c) 0 + +#endif /* _DF1S */ + + +/* Additional file attribute bits for internal use */ +#define AM_VOL 0x08 /* Volume label */ +#define AM_LFN 0x0F /* LFN entry */ +#define AM_MASK 0x3F /* Mask of defined bits */ + + +/* Additional file access control and file status flags for internal use */ +#define FA_SEEKEND 0x20 /* Seek to end of the file on file open */ +#define FA_MODIFIED 0x40 /* File has been modified */ +#define FA_DIRTY 0x80 /* FIL.buf[] needs to be written-back */ + + +/* Name status flags in fn[] */ +#define NSFLAG 11 /* Index of the name status byte */ +#define NS_LOSS 0x01 /* Out of 8.3 format */ +#define NS_LFN 0x02 /* Force to create LFN entry */ +#define NS_LAST 0x04 /* Last segment */ +#define NS_BODY 0x08 /* Lower case flag (body) */ +#define NS_EXT 0x10 /* Lower case flag (ext) */ +#define NS_DOT 0x20 /* Dot entry */ +#define NS_NOLFN 0x40 /* Do not find LFN */ +#define NS_NONAME 0x80 /* Not followed */ + + +/* Limits and boundaries */ +#define MAX_DIR 0x200000 /* Max size of FAT directory */ +#define MAX_DIR_EX 0x10000000 /* Max size of exFAT directory */ +#define MAX_FAT12 0xFF5 /* Max FAT12 clusters (differs from specs, but correct for real DOS/Windows behavior) */ +#define MAX_FAT16 0xFFF5 /* Max FAT16 clusters (differs from specs, but correct for real DOS/Windows behavior) */ +#define MAX_FAT32 0x0FFFFFF5 /* Max FAT32 clusters (not specified, practical limit) */ +#define MAX_EXFAT 0x7FFFFFFD /* Max exFAT clusters (differs from specs, implementation limit) */ + + +/* FatFs refers the FAT structure as simple byte array instead of structure member +/ because the C structure is not binary compatible between different platforms */ + +#define BS_JmpBoot 0 /* x86 jump instruction (3-byte) */ +#define BS_OEMName 3 /* OEM name (8-byte) */ +#define BPB_BytsPerSec 11 /* Sector size [byte] (WORD) */ +#define BPB_SecPerClus 13 /* Cluster size [sector] (BYTE) */ +#define BPB_RsvdSecCnt 14 /* Size of reserved area [sector] (WORD) */ +#define BPB_NumFATs 16 /* Number of FATs (BYTE) */ +#define BPB_RootEntCnt 17 /* Size of root directory area for FAT12/16 [entry] (WORD) */ +#define BPB_TotSec16 19 /* Volume size (16-bit) [sector] (WORD) */ +#define BPB_Media 21 /* Media descriptor byte (BYTE) */ +#define BPB_FATSz16 22 /* FAT size (16-bit) [sector] (WORD) */ +#define BPB_SecPerTrk 24 /* Track size for int13h [sector] (WORD) */ +#define BPB_NumHeads 26 /* Number of heads for int13h (WORD) */ +#define BPB_HiddSec 28 /* Volume offset from top of the drive (DWORD) */ +#define BPB_TotSec32 32 /* Volume size (32-bit) [sector] (DWORD) */ +#define BS_DrvNum 36 /* Physical drive number for int13h (BYTE) */ +#define BS_NTres 37 /* Error flag (BYTE) */ +#define BS_BootSig 38 /* Extended boot signature (BYTE) */ +#define BS_VolID 39 /* Volume serial number (DWORD) */ +#define BS_VolLab 43 /* Volume label string (8-byte) */ +#define BS_FilSysType 54 /* File system type string (8-byte) */ +#define BS_BootCode 62 /* Boot code (448-byte) */ +#define BS_55AA 510 /* Signature word (WORD) */ + +#define BPB_FATSz32 36 /* FAT32: FAT size [sector] (DWORD) */ +#define BPB_ExtFlags32 40 /* FAT32: Extended flags (WORD) */ +#define BPB_FSVer32 42 /* FAT32: File system version (WORD) */ +#define BPB_RootClus32 44 /* FAT32: Root directory cluster (DWORD) */ +#define BPB_FSInfo32 48 /* FAT32: Offset of FSINFO sector (WORD) */ +#define BPB_BkBootSec32 50 /* FAT32: Offset of backup boot sector (WORD) */ +#define BS_DrvNum32 64 /* FAT32: Physical drive number for int13h (BYTE) */ +#define BS_NTres32 65 /* FAT32: Error flag (BYTE) */ +#define BS_BootSig32 66 /* FAT32: Extended boot signature (BYTE) */ +#define BS_VolID32 67 /* FAT32: Volume serial number (DWORD) */ +#define BS_VolLab32 71 /* FAT32: Volume label string (8-byte) */ +#define BS_FilSysType32 82 /* FAT32: File system type string (8-byte) */ +#define BS_BootCode32 90 /* FAT32: Boot code (420-byte) */ + +#define BPB_ZeroedEx 11 /* exFAT: MBZ field (53-byte) */ +#define BPB_VolOfsEx 64 /* exFAT: Volume offset from top of the drive [sector] (QWORD) */ +#define BPB_TotSecEx 72 /* exFAT: Volume size [sector] (QWORD) */ +#define BPB_FatOfsEx 80 /* exFAT: FAT offset from top of the volume [sector] (DWORD) */ +#define BPB_FatSzEx 84 /* exFAT: FAT size [sector] (DWORD) */ +#define BPB_DataOfsEx 88 /* exFAT: Data offset from top of the volume [sector] (DWORD) */ +#define BPB_NumClusEx 92 /* exFAT: Number of clusters (DWORD) */ +#define BPB_RootClusEx 96 /* exFAT: Root directory start cluster (DWORD) */ +#define BPB_VolIDEx 100 /* exFAT: Volume serial number (DWORD) */ +#define BPB_FSVerEx 104 /* exFAT: File system version (WORD) */ +#define BPB_VolFlagEx 106 /* exFAT: Volume flags (BYTE) */ +#define BPB_ActFatEx 107 /* exFAT: Active FAT flags (BYTE) */ +#define BPB_BytsPerSecEx 108 /* exFAT: Log2 of sector size in unit of byte (BYTE) */ +#define BPB_SecPerClusEx 109 /* exFAT: Log2 of cluster size in unit of sector (BYTE) */ +#define BPB_NumFATsEx 110 /* exFAT: Number of FATs (BYTE) */ +#define BPB_DrvNumEx 111 /* exFAT: Physical drive number for int13h (BYTE) */ +#define BPB_PercInUseEx 112 /* exFAT: Percent in use (BYTE) */ +#define BPB_RsvdEx 113 /* exFAT: Reserved (7-byte) */ +#define BS_BootCodeEx 120 /* exFAT: Boot code (390-byte) */ + +#define DIR_Name 0 /* Short file name (11-byte) */ +#define DIR_Attr 11 /* Attribute (BYTE) */ +#define DIR_NTres 12 /* Lower case flag (BYTE) */ +#define DIR_CrtTime10 13 /* Created time sub-second (BYTE) */ +#define DIR_CrtTime 14 /* Created time (DWORD) */ +#define DIR_LstAccDate 18 /* Last accessed date (WORD) */ +#define DIR_FstClusHI 20 /* Higher 16-bit of first cluster (WORD) */ +#define DIR_ModTime 22 /* Modified time (DWORD) */ +#define DIR_FstClusLO 26 /* Lower 16-bit of first cluster (WORD) */ +#define DIR_FileSize 28 /* File size (DWORD) */ +#define LDIR_Ord 0 /* LFN: LFN order and LLE flag (BYTE) */ +#define LDIR_Attr 11 /* LFN: LFN attribute (BYTE) */ +#define LDIR_Type 12 /* LFN: Entry type (BYTE) */ +#define LDIR_Chksum 13 /* LFN: Checksum of the SFN (BYTE) */ +#define LDIR_FstClusLO 26 /* LFN: MBZ field (WORD) */ +#define XDIR_Type 0 /* exFAT: Type of exFAT directory entry (BYTE) */ +#define XDIR_NumLabel 1 /* exFAT: Number of volume label characters (BYTE) */ +#define XDIR_Label 2 /* exFAT: Volume label (11-WORD) */ +#define XDIR_CaseSum 4 /* exFAT: Sum of case conversion table (DWORD) */ +#define XDIR_NumSec 1 /* exFAT: Number of secondary entries (BYTE) */ +#define XDIR_SetSum 2 /* exFAT: Sum of the set of directory entries (WORD) */ +#define XDIR_Attr 4 /* exFAT: File attribute (WORD) */ +#define XDIR_CrtTime 8 /* exFAT: Created time (DWORD) */ +#define XDIR_ModTime 12 /* exFAT: Modified time (DWORD) */ +#define XDIR_AccTime 16 /* exFAT: Last accessed time (DWORD) */ +#define XDIR_CrtTime10 20 /* exFAT: Created time subsecond (BYTE) */ +#define XDIR_ModTime10 21 /* exFAT: Modified time subsecond (BYTE) */ +#define XDIR_CrtTZ 22 /* exFAT: Created timezone (BYTE) */ +#define XDIR_ModTZ 23 /* exFAT: Modified timezone (BYTE) */ +#define XDIR_AccTZ 24 /* exFAT: Last accessed timezone (BYTE) */ +#define XDIR_GenFlags 33 /* exFAT: General secondary flags (WORD) */ +#define XDIR_NumName 35 /* exFAT: Number of file name characters (BYTE) */ +#define XDIR_NameHash 36 /* exFAT: Hash of file name (WORD) */ +#define XDIR_ValidFileSize 40 /* exFAT: Valid file size (QWORD) */ +#define XDIR_FstClus 52 /* exFAT: First cluster of the file data (DWORD) */ +#define XDIR_FileSize 56 /* exFAT: File/Directory size (QWORD) */ + +#define SZDIRE 32 /* Size of a directory entry */ +#define DDEM 0xE5 /* Deleted directory entry mark set to DIR_Name[0] */ +#define RDDEM 0x05 /* Replacement of the character collides with DDEM */ +#define LLEF 0x40 /* Last long entry flag in LDIR_Ord */ + +#define FSI_LeadSig 0 /* FAT32 FSI: Leading signature (DWORD) */ +#define FSI_StrucSig 484 /* FAT32 FSI: Structure signature (DWORD) */ +#define FSI_Free_Count 488 /* FAT32 FSI: Number of free clusters (DWORD) */ +#define FSI_Nxt_Free 492 /* FAT32 FSI: Last allocated cluster (DWORD) */ + +#define MBR_Table 446 /* MBR: Offset of partition table in the MBR */ +#define SZ_PTE 16 /* MBR: Size of a partition table entry */ +#define PTE_Boot 0 /* MBR PTE: Boot indicator */ +#define PTE_StHead 1 /* MBR PTE: Start head */ +#define PTE_StSec 2 /* MBR PTE: Start sector */ +#define PTE_StCyl 3 /* MBR PTE: Start cylinder */ +#define PTE_System 4 /* MBR PTE: System ID */ +#define PTE_EdHead 5 /* MBR PTE: End head */ +#define PTE_EdSec 6 /* MBR PTE: End sector */ +#define PTE_EdCyl 7 /* MBR PTE: End cylinder */ +#define PTE_StLba 8 /* MBR PTE: Start in LBA */ +#define PTE_SizLba 12 /* MBR PTE: Size in LBA */ + + +/* Post process after fatal error on file operation */ +#define ABORT(fs, res) { fp->err = (BYTE)(res); LEAVE_FF(fs, res); } + + +/* Reentrancy related */ +#if _FS_REENTRANT +#if _USE_LFN == 1 +#error Static LFN work area cannot be used at thread-safe configuration +#endif +#define ENTER_FF(fs) { if (!lock_fs(fs)) return FR_TIMEOUT; } +#define LEAVE_FF(fs, res) { unlock_fs(fs, res); return res; } +#else +#define ENTER_FF(fs) +#define LEAVE_FF(fs, res) return res +#endif + + +/* Definitions of volume - partition conversion */ +#if _MULTI_PARTITION +#define LD2PD(vol) VolToPart[vol].pd /* Get physical drive number */ +#define LD2PT(vol) VolToPart[vol].pt /* Get partition index */ +#else +#define LD2PD(vol) (BYTE)(vol) /* Each logical drive is bound to the same physical drive number */ +#define LD2PT(vol) 0 /* Find first valid partition or in SFD */ +#endif + + +/* Definitions of sector size */ +#if (_MAX_SS < _MIN_SS) || (_MAX_SS != 512 && _MAX_SS != 1024 && _MAX_SS != 2048 && _MAX_SS != 4096) || (_MIN_SS != 512 && _MIN_SS != 1024 && _MIN_SS != 2048 && _MIN_SS != 4096) +#error Wrong sector size configuration +#endif +#if _MAX_SS == _MIN_SS +#define SS(fs) ((UINT)_MAX_SS) /* Fixed sector size */ +#else +#define SS(fs) ((fs)->ssize) /* Variable sector size */ +#endif + + +/* Timestamp */ +#if _FS_NORTC == 1 +#if _NORTC_YEAR < 1980 || _NORTC_YEAR > 2107 || _NORTC_MON < 1 || _NORTC_MON > 12 || _NORTC_MDAY < 1 || _NORTC_MDAY > 31 +#error Invalid _FS_NORTC settings +#endif +#define GET_FATTIME() ((DWORD)(_NORTC_YEAR - 1980) << 25 | (DWORD)_NORTC_MON << 21 | (DWORD)_NORTC_MDAY << 16) +#else +#define GET_FATTIME() get_fattime() +#endif + + +/* File lock controls */ +#if _FS_LOCK != 0 +#if _FS_READONLY +#error _FS_LOCK must be 0 at read-only configuration +#endif +typedef struct { + FATFS *fs; /* Object ID 1, volume (NULL:blank entry) */ + DWORD clu; /* Object ID 2, containing directory (0:root) */ + DWORD ofs; /* Object ID 3, offset in the directory */ + WORD ctr; /* Object open counter, 0:none, 0x01..0xFF:read mode open count, 0x100:write mode */ +} FILESEM; +#endif + + + + + +/*-------------------------------------------------------------------------- + + Module Private Work Area + +---------------------------------------------------------------------------*/ + +/* Remark: Variables defined here without initial value shall be guaranteed +/ zero/null at start-up. If not, the linker option or start-up routine is +/ not compliance with C standard. */ + +#if _VOLUMES < 1 || _VOLUMES > 10 +#error Wrong _VOLUMES setting +#endif +static FATFS *FatFs[_VOLUMES]; /* Pointer to the file system objects (logical drives) */ +static WORD Fsid; /* File system mount ID */ + +#if _FS_RPATH != 0 && _VOLUMES >= 2 +static BYTE CurrVol; /* Current drive */ +#endif + +#if _FS_LOCK != 0 +static FILESEM Files[_FS_LOCK]; /* Open object lock semaphores */ +#endif + +#if _USE_LFN == 0 /* Non-LFN configuration */ +#define DEF_NAMBUF +#define INIT_NAMBUF(fs) +#define FREE_NAMBUF() + +#else /* LFN configuration */ +#if _MAX_LFN < 12 || _MAX_LFN > 255 +#error Wrong _MAX_LFN value +#endif +#define MAXDIRB(nc) ((nc + 44U) / 15 * SZDIRE) + +#if _USE_LFN == 1 /* LFN enabled with static working buffer */ +#if _FS_EXFAT +static BYTE DirBuf[MAXDIRB(_MAX_LFN)]; /* Directory entry block scratchpad buffer */ +#endif +static WCHAR LfnBuf[_MAX_LFN + 1]; /* LFN enabled with static working buffer */ +#define DEF_NAMBUF +#define INIT_NAMBUF(fs) +#define FREE_NAMBUF() + +#elif _USE_LFN == 2 /* LFN enabled with dynamic working buffer on the stack */ +#if _FS_EXFAT +#define DEF_NAMBUF WCHAR lbuf[_MAX_LFN+1]; BYTE dbuf[MAXDIRB(_MAX_LFN)]; +#define INIT_NAMBUF(fs) { (fs)->lfnbuf = lbuf; (fs)->dirbuf = dbuf; } +#define FREE_NAMBUF() +#else +#define DEF_NAMBUF WCHAR lbuf[_MAX_LFN+1]; +#define INIT_NAMBUF(fs) { (fs)->lfnbuf = lbuf; } +#define FREE_NAMBUF() +#endif + +#elif _USE_LFN == 3 /* LFN enabled with dynamic working buffer on the heap */ +#if _FS_EXFAT +#define DEF_NAMBUF WCHAR *lfn; +#define INIT_NAMBUF(fs) { lfn = ff_memalloc((_MAX_LFN+1)*2 + MAXDIRB(_MAX_LFN)); if (!lfn) LEAVE_FF(fs, FR_NOT_ENOUGH_CORE); (fs)->lfnbuf = lfn; (fs)->dirbuf = (BYTE*)(lfn+_MAX_LFN+1); } +#define FREE_NAMBUF() ff_memfree(lfn) +#else +#define DEF_NAMBUF WCHAR *lfn; +#define INIT_NAMBUF(fs) { lfn = ff_memalloc((_MAX_LFN+1)*2); if (!lfn) LEAVE_FF(fs, FR_NOT_ENOUGH_CORE); (fs)->lfnbuf = lfn; } +#define FREE_NAMBUF() ff_memfree(lfn) +#endif + +#else +#error Wrong _USE_LFN setting + +#endif +#endif /* else _USE_LFN == 0 */ + +#ifdef _EXCVT +static const BYTE ExCvt[] = _EXCVT; /* Upper conversion table for SBCS extended characters */ +#endif + + + + + + +/*-------------------------------------------------------------------------- + + Module Private Functions + +---------------------------------------------------------------------------*/ + + +/*-----------------------------------------------------------------------*/ +/* Load/Store multi-byte word in the FAT structure */ +/*-----------------------------------------------------------------------*/ + +static +WORD ld_word (const BYTE* ptr) /* Load a 2-byte little-endian word */ +{ + WORD rv; + + rv = ptr[1]; + rv = rv << 8 | ptr[0]; + return rv; +} + +static +DWORD ld_dword (const BYTE* ptr) /* Load a 4-byte little-endian word */ +{ + DWORD rv; + + rv = ptr[3]; + rv = rv << 8 | ptr[2]; + rv = rv << 8 | ptr[1]; + rv = rv << 8 | ptr[0]; + return rv; +} + +#if _FS_EXFAT +static +QWORD ld_qword (const BYTE* ptr) /* Load an 8-byte little-endian word */ +{ + QWORD rv; + + rv = ptr[7]; + rv = rv << 8 | ptr[6]; + rv = rv << 8 | ptr[5]; + rv = rv << 8 | ptr[4]; + rv = rv << 8 | ptr[3]; + rv = rv << 8 | ptr[2]; + rv = rv << 8 | ptr[1]; + rv = rv << 8 | ptr[0]; + return rv; +} +#endif + +#if !_FS_READONLY +static +void st_word (BYTE* ptr, WORD val) /* Store a 2-byte word in little-endian */ +{ + *ptr++ = (BYTE)val; val >>= 8; + *ptr++ = (BYTE)val; +} + +static +void st_dword (BYTE* ptr, DWORD val) /* Store a 4-byte word in little-endian */ +{ + *ptr++ = (BYTE)val; val >>= 8; + *ptr++ = (BYTE)val; val >>= 8; + *ptr++ = (BYTE)val; val >>= 8; + *ptr++ = (BYTE)val; +} + +#if _FS_EXFAT +static +void st_qword (BYTE* ptr, QWORD val) /* Store an 8-byte word in little-endian */ +{ + *ptr++ = (BYTE)val; val >>= 8; + *ptr++ = (BYTE)val; val >>= 8; + *ptr++ = (BYTE)val; val >>= 8; + *ptr++ = (BYTE)val; val >>= 8; + *ptr++ = (BYTE)val; val >>= 8; + *ptr++ = (BYTE)val; val >>= 8; + *ptr++ = (BYTE)val; val >>= 8; + *ptr++ = (BYTE)val; +} +#endif +#endif /* !_FS_READONLY */ + + + +/*-----------------------------------------------------------------------*/ +/* String functions */ +/*-----------------------------------------------------------------------*/ + +/* Copy memory to memory */ +static +void mem_cpy (void* dst, const void* src, UINT cnt) { + BYTE *d = (BYTE*)dst; + const BYTE *s = (const BYTE*)src; + + if (cnt) { + do { + *d++ = *s++; + } while (--cnt); + } +} + +/* Fill memory block */ +static +void mem_set (void* dst, int val, UINT cnt) { + BYTE *d = (BYTE*)dst; + + do { + *d++ = (BYTE)val; + } while (--cnt); +} + +/* Compare memory block */ +static +int mem_cmp (const void* dst, const void* src, UINT cnt) { /* ZR:same, NZ:different */ + const BYTE *d = (const BYTE *)dst, *s = (const BYTE *)src; + int r = 0; + + do { + r = *d++ - *s++; + } while (--cnt && r == 0); + + return r; +} + +/* Check if chr is contained in the string */ +static +int chk_chr (const char* str, int chr) { /* NZ:contained, ZR:not contained */ + while (*str && *str != chr) str++; + return *str; +} + + + + +#if _FS_REENTRANT +/*-----------------------------------------------------------------------*/ +/* Request/Release grant to access the volume */ +/*-----------------------------------------------------------------------*/ +static +int lock_fs ( + FATFS* fs /* File system object */ +) +{ + return (fs && ff_req_grant(fs->sobj)) ? 1 : 0; +} + + +static +void unlock_fs ( + FATFS* fs, /* File system object */ + FRESULT res /* Result code to be returned */ +) +{ + if (fs && res != FR_NOT_ENABLED && res != FR_INVALID_DRIVE && res != FR_TIMEOUT) { + ff_rel_grant(fs->sobj); + } +} + +#endif + + + +#if _FS_LOCK != 0 +/*-----------------------------------------------------------------------*/ +/* File lock control functions */ +/*-----------------------------------------------------------------------*/ + +static +FRESULT chk_lock ( /* Check if the file can be accessed */ + DIR* dp, /* Directory object pointing the file to be checked */ + int acc /* Desired access type (0:Read, 1:Write, 2:Delete/Rename) */ +) +{ + UINT i, be; + + /* Search file semaphore table */ + for (i = be = 0; i < _FS_LOCK; i++) { + if (Files[i].fs) { /* Existing entry */ + if (Files[i].fs == dp->obj.fs && /* Check if the object matched with an open object */ + Files[i].clu == dp->obj.sclust && + Files[i].ofs == dp->dptr) break; + } else { /* Blank entry */ + be = 1; + } + } + if (i == _FS_LOCK) { /* The object is not opened */ + return (be || acc == 2) ? FR_OK : FR_TOO_MANY_OPEN_FILES; /* Is there a blank entry for new object? */ + } + + /* The object has been opened. Reject any open against writing file and all write mode open */ + return (acc || Files[i].ctr == 0x100) ? FR_LOCKED : FR_OK; +} + + +static +int enq_lock (void) /* Check if an entry is available for a new object */ +{ + UINT i; + + for (i = 0; i < _FS_LOCK && Files[i].fs; i++) ; + return (i == _FS_LOCK) ? 0 : 1; +} + + +static +UINT inc_lock ( /* Increment object open counter and returns its index (0:Internal error) */ + DIR* dp, /* Directory object pointing the file to register or increment */ + int acc /* Desired access (0:Read, 1:Write, 2:Delete/Rename) */ +) +{ + UINT i; + + + for (i = 0; i < _FS_LOCK; i++) { /* Find the object */ + if (Files[i].fs == dp->obj.fs && + Files[i].clu == dp->obj.sclust && + Files[i].ofs == dp->dptr) break; + } + + if (i == _FS_LOCK) { /* Not opened. Register it as new. */ + for (i = 0; i < _FS_LOCK && Files[i].fs; i++) ; + if (i == _FS_LOCK) return 0; /* No free entry to register (int err) */ + Files[i].fs = dp->obj.fs; + Files[i].clu = dp->obj.sclust; + Files[i].ofs = dp->dptr; + Files[i].ctr = 0; + } + + if (acc && Files[i].ctr) return 0; /* Access violation (int err) */ + + Files[i].ctr = acc ? 0x100 : Files[i].ctr + 1; /* Set semaphore value */ + + return i + 1; +} + + +static +FRESULT dec_lock ( /* Decrement object open counter */ + UINT i /* Semaphore index (1..) */ +) +{ + WORD n; + FRESULT res; + + + if (--i < _FS_LOCK) { /* Shift index number origin from 0 */ + n = Files[i].ctr; + if (n == 0x100) n = 0; /* If write mode open, delete the entry */ + if (n > 0) n--; /* Decrement read mode open count */ + Files[i].ctr = n; + if (n == 0) Files[i].fs = 0; /* Delete the entry if open count gets zero */ + res = FR_OK; + } else { + res = FR_INT_ERR; /* Invalid index nunber */ + } + return res; +} + + +static +void clear_lock ( /* Clear lock entries of the volume */ + FATFS *fs +) +{ + UINT i; + + for (i = 0; i < _FS_LOCK; i++) { + if (Files[i].fs == fs) Files[i].fs = 0; + } +} + +#endif /* _FS_LOCK != 0 */ + + + +/*-----------------------------------------------------------------------*/ +/* Move/Flush disk access window in the file system object */ +/*-----------------------------------------------------------------------*/ +#if !_FS_READONLY +static +FRESULT sync_window ( /* Returns FR_OK or FR_DISK_ERROR */ + FATFS* fs /* File system object */ +) +{ + DWORD wsect; + UINT nf; + FRESULT res = FR_OK; + + + if (fs->wflag) { /* Write back the sector if it is dirty */ + wsect = fs->winsect; /* Current sector number */ + if (disk_write(fs->drv, fs->win, wsect, 1) != RES_OK) { + res = FR_DISK_ERR; + } else { + fs->wflag = 0; + if (wsect - fs->fatbase < fs->fsize) { /* Is it in the FAT area? */ + for (nf = fs->n_fats; nf >= 2; nf--) { /* Reflect the change to all FAT copies */ + wsect += fs->fsize; + disk_write(fs->drv, fs->win, wsect, 1); + } + } + } + } + return res; +} +#endif + + +static +FRESULT move_window ( /* Returns FR_OK or FR_DISK_ERROR */ + FATFS* fs, /* File system object */ + DWORD sector /* Sector number to make appearance in the fs->win[] */ +) +{ + FRESULT res = FR_OK; + + + if (sector != fs->winsect) { /* Window offset changed? */ +#if !_FS_READONLY + res = sync_window(fs); /* Write-back changes */ +#endif + if (res == FR_OK) { /* Fill sector window with new data */ + if (disk_read(fs->drv, fs->win, sector, 1) != RES_OK) { + sector = 0xFFFFFFFF; /* Invalidate window if data is not reliable */ + res = FR_DISK_ERR; + } + fs->winsect = sector; + } + } + return res; +} + + + + +#if !_FS_READONLY +/*-----------------------------------------------------------------------*/ +/* Synchronize file system and strage device */ +/*-----------------------------------------------------------------------*/ + +static +FRESULT sync_fs ( /* FR_OK:succeeded, !=0:error */ + FATFS* fs /* File system object */ +) +{ + FRESULT res; + + + res = sync_window(fs); + if (res == FR_OK) { + /* Update FSInfo sector if needed */ + if (fs->fs_type == FS_FAT32 && fs->fsi_flag == 1) { + /* Create FSInfo structure */ + mem_set(fs->win, 0, SS(fs)); + st_word(fs->win + BS_55AA, 0xAA55); + st_dword(fs->win + FSI_LeadSig, 0x41615252); + st_dword(fs->win + FSI_StrucSig, 0x61417272); + st_dword(fs->win + FSI_Free_Count, fs->free_clst); + st_dword(fs->win + FSI_Nxt_Free, fs->last_clst); + /* Write it into the FSInfo sector */ + fs->winsect = fs->volbase + 1; + disk_write(fs->drv, fs->win, fs->winsect, 1); + fs->fsi_flag = 0; + } + /* Make sure that no pending write process in the physical drive */ + if (disk_ioctl(fs->drv, CTRL_SYNC, 0) != RES_OK) res = FR_DISK_ERR; + } + + return res; +} + +#endif + + + +/*-----------------------------------------------------------------------*/ +/* Get sector# from cluster# */ +/*-----------------------------------------------------------------------*/ + +static +DWORD clust2sect ( /* !=0:Sector number, 0:Failed (invalid cluster#) */ + FATFS* fs, /* File system object */ + DWORD clst /* Cluster# to be converted */ +) +{ + clst -= 2; + if (clst >= fs->n_fatent - 2) return 0; /* Invalid cluster# */ + return clst * fs->csize + fs->database; +} + + + + +/*-----------------------------------------------------------------------*/ +/* FAT access - Read value of a FAT entry */ +/*-----------------------------------------------------------------------*/ + +static +DWORD get_fat ( /* 0xFFFFFFFF:Disk error, 1:Internal error, 2..0x7FFFFFFF:Cluster status */ + _FDID* obj, /* Corresponding object */ + DWORD clst /* Cluster number to get the value */ +) +{ + UINT wc, bc; + DWORD val; + FATFS *fs = obj->fs; + + + if (clst < 2 || clst >= fs->n_fatent) { /* Check if in valid range */ + val = 1; /* Internal error */ + + } else { + val = 0xFFFFFFFF; /* Default value falls on disk error */ + + switch (fs->fs_type) { + case FS_FAT12 : + bc = (UINT)clst; bc += bc / 2; + if (move_window(fs, fs->fatbase + (bc / SS(fs))) != FR_OK) break; + wc = fs->win[bc++ % SS(fs)]; + if (move_window(fs, fs->fatbase + (bc / SS(fs))) != FR_OK) break; + wc |= fs->win[bc % SS(fs)] << 8; + val = (clst & 1) ? (wc >> 4) : (wc & 0xFFF); + break; + + case FS_FAT16 : + if (move_window(fs, fs->fatbase + (clst / (SS(fs) / 2))) != FR_OK) break; + val = ld_word(fs->win + clst * 2 % SS(fs)); + break; + + case FS_FAT32 : + if (move_window(fs, fs->fatbase + (clst / (SS(fs) / 4))) != FR_OK) break; + val = ld_dword(fs->win + clst * 4 % SS(fs)) & 0x0FFFFFFF; + break; +#if _FS_EXFAT + case FS_EXFAT : + if (obj->objsize) { + DWORD cofs = clst - obj->sclust; /* Offset from start cluster */ + DWORD clen = (DWORD)((obj->objsize - 1) / SS(fs)) / fs->csize; /* Number of clusters - 1 */ + + if (obj->stat == 2) { /* Is there no valid chain on the FAT? */ + if (cofs <= clen) { + val = (cofs == clen) ? 0x7FFFFFFF : clst + 1; /* Generate the value */ + break; + } + } + if (obj->stat == 3 && cofs < obj->n_cont) { /* Is it in the 1st fragment? */ + val = clst + 1; /* Generate the value */ + break; + } + if (obj->stat != 2) { /* Get value from FAT if FAT chain is valid */ + if (obj->n_frag != 0) { /* Is it on the growing edge? */ + val = 0x7FFFFFFF; /* Generate EOC */ + } else { + if (move_window(fs, fs->fatbase + (clst / (SS(fs) / 4))) != FR_OK) break; + val = ld_dword(fs->win + clst * 4 % SS(fs)) & 0x7FFFFFFF; + } + break; + } + } + /* go to default */ +#endif + default: + val = 1; /* Internal error */ + } + } + + return val; +} + + + + +#if !_FS_READONLY +/*-----------------------------------------------------------------------*/ +/* FAT access - Change value of a FAT entry */ +/*-----------------------------------------------------------------------*/ + +static +FRESULT put_fat ( /* FR_OK(0):succeeded, !=0:error */ + FATFS* fs, /* Corresponding file system object */ + DWORD clst, /* FAT index number (cluster number) to be changed */ + DWORD val /* New value to be set to the entry */ +) +{ + UINT bc; + BYTE *p; + FRESULT res = FR_INT_ERR; + + if (clst >= 2 && clst < fs->n_fatent) { /* Check if in valid range */ + switch (fs->fs_type) { + case FS_FAT12 : /* Bitfield items */ + bc = (UINT)clst; bc += bc / 2; + res = move_window(fs, fs->fatbase + (bc / SS(fs))); + if (res != FR_OK) break; + p = fs->win + bc++ % SS(fs); + *p = (clst & 1) ? ((*p & 0x0F) | ((BYTE)val << 4)) : (BYTE)val; + fs->wflag = 1; + res = move_window(fs, fs->fatbase + (bc / SS(fs))); + if (res != FR_OK) break; + p = fs->win + bc % SS(fs); + *p = (clst & 1) ? (BYTE)(val >> 4) : ((*p & 0xF0) | ((BYTE)(val >> 8) & 0x0F)); + fs->wflag = 1; + break; + + case FS_FAT16 : /* WORD aligned items */ + res = move_window(fs, fs->fatbase + (clst / (SS(fs) / 2))); + if (res != FR_OK) break; + st_word(fs->win + clst * 2 % SS(fs), (WORD)val); + fs->wflag = 1; + break; + + case FS_FAT32 : /* DWORD aligned items */ +#if _FS_EXFAT + case FS_EXFAT : +#endif + res = move_window(fs, fs->fatbase + (clst / (SS(fs) / 4))); + if (res != FR_OK) break; + if (!_FS_EXFAT || fs->fs_type != FS_EXFAT) { + val = (val & 0x0FFFFFFF) | (ld_dword(fs->win + clst * 4 % SS(fs)) & 0xF0000000); + } + st_dword(fs->win + clst * 4 % SS(fs), val); + fs->wflag = 1; + break; + } + } + return res; +} + +#endif /* !_FS_READONLY */ + + + + +#if _FS_EXFAT && !_FS_READONLY +/*-----------------------------------------------------------------------*/ +/* exFAT: Accessing FAT and Allocation Bitmap */ +/*-----------------------------------------------------------------------*/ + +/*--------------------------------------*/ +/* Find a contiguous free cluster block */ +/*--------------------------------------*/ + +static +DWORD find_bitmap ( /* 0:Not found, 2..:Cluster block found, 0xFFFFFFFF:Disk error */ + FATFS* fs, /* File system object */ + DWORD clst, /* Cluster number to scan from */ + DWORD ncl /* Number of contiguous clusters to find (1..) */ +) +{ + BYTE bm, bv; + UINT i; + DWORD val, scl, ctr; + + + clst -= 2; /* The first bit in the bitmap corresponds to cluster #2 */ + if (clst >= fs->n_fatent - 2) clst = 0; + scl = val = clst; ctr = 0; + for (;;) { + if (move_window(fs, fs->database + val / 8 / SS(fs)) != FR_OK) return 0xFFFFFFFF; /* (assuming bitmap is located top of the cluster heap) */ + i = val / 8 % SS(fs); bm = 1 << (val % 8); + do { + do { + bv = fs->win[i] & bm; bm <<= 1; /* Get bit value */ + if (++val >= fs->n_fatent - 2) { /* Next cluster (with wrap-around) */ + val = 0; bm = 0; i = SS(fs); + } + if (!bv) { /* Is it a free cluster? */ + if (++ctr == ncl) return scl + 2; /* Check if run length is sufficient for required */ + } else { + scl = val; ctr = 0; /* Encountered a cluster in-use, restart to scan */ + } + if (val == clst) return 0; /* All cluster scanned? */ + } while (bm); + bm = 1; + } while (++i < SS(fs)); + } +} + + +/*----------------------------------------*/ +/* Set/Clear a block of allocation bitmap */ +/*----------------------------------------*/ + +static +FRESULT change_bitmap ( + FATFS* fs, /* File system object */ + DWORD clst, /* Cluster number to change from */ + DWORD ncl, /* Number of clusters to be changed */ + int bv /* bit value to be set (0 or 1) */ +) +{ + BYTE bm; + UINT i; + DWORD sect; + + clst -= 2; /* The first bit corresponds to cluster #2 */ + sect = fs->database + clst / 8 / SS(fs); /* Sector address (assuming bitmap is located top of the cluster heap) */ + i = clst / 8 % SS(fs); /* Byte offset in the sector */ + bm = 1 << (clst % 8); /* Bit mask in the byte */ + for (;;) { + if (move_window(fs, sect++) != FR_OK) return FR_DISK_ERR; + do { + do { + if (bv == (int)((fs->win[i] & bm) != 0)) return FR_INT_ERR; /* Is the bit expected value? */ + fs->win[i] ^= bm; /* Flip the bit */ + fs->wflag = 1; + if (--ncl == 0) return FR_OK; /* All bits processed? */ + } while (bm <<= 1); /* Next bit */ + bm = 1; + } while (++i < SS(fs)); /* Next byte */ + i = 0; + } +} + + +/*---------------------------------------------*/ +/* Fill the first fragment of the FAT chain */ +/*---------------------------------------------*/ + +static +FRESULT fill_first_frag ( + _FDID* obj /* Pointer to the corresponding object */ +) +{ + FRESULT res; + DWORD cl, n; + + if (obj->stat == 3) { /* Has the object been changed 'fragmented'? */ + for (cl = obj->sclust, n = obj->n_cont; n; cl++, n--) { /* Create cluster chain on the FAT */ + res = put_fat(obj->fs, cl, cl + 1); + if (res != FR_OK) return res; + } + obj->stat = 0; /* Change status 'FAT chain is valid' */ + } + return FR_OK; +} + + +/*---------------------------------------------*/ +/* Fill the last fragment of the FAT chain */ +/*---------------------------------------------*/ + +static +FRESULT fill_last_frag ( + _FDID* obj, /* Pointer to the corresponding object */ + DWORD lcl, /* Last cluster of the fragment */ + DWORD term /* Value to set the last FAT entry */ +) +{ + FRESULT res; + + while (obj->n_frag > 0) { /* Create the last chain on the FAT */ + res = put_fat(obj->fs, lcl - obj->n_frag + 1, (obj->n_frag > 1) ? lcl - obj->n_frag + 2 : term); + if (res != FR_OK) return res; + obj->n_frag--; + } + return FR_OK; +} + +#endif /* _FS_EXFAT && !_FS_READONLY */ + + + +#if !_FS_READONLY +/*-----------------------------------------------------------------------*/ +/* FAT handling - Remove a cluster chain */ +/*-----------------------------------------------------------------------*/ +static +FRESULT remove_chain ( /* FR_OK(0):succeeded, !=0:error */ + _FDID* obj, /* Corresponding object */ + DWORD clst, /* Cluster to remove a chain from */ + DWORD pclst /* Previous cluster of clst (0:an entire chain) */ +) +{ + FRESULT res = FR_OK; + DWORD nxt; + FATFS *fs = obj->fs; +#if _FS_EXFAT || _USE_TRIM + DWORD scl = clst, ecl = clst; +#endif +#if _USE_TRIM + DWORD rt[2]; +#endif + + if (clst < 2 || clst >= fs->n_fatent) return FR_INT_ERR; /* Check if in valid range */ + + /* Mark the previous cluster 'EOC' on the FAT if it exists */ + if (pclst && (!_FS_EXFAT || fs->fs_type != FS_EXFAT || obj->stat != 2)) { + res = put_fat(fs, pclst, 0xFFFFFFFF); + if (res != FR_OK) return res; + } + + /* Remove the chain */ + do { + nxt = get_fat(obj, clst); /* Get cluster status */ + if (nxt == 0) break; /* Empty cluster? */ + if (nxt == 1) return FR_INT_ERR; /* Internal error? */ + if (nxt == 0xFFFFFFFF) return FR_DISK_ERR; /* Disk error? */ + if (!_FS_EXFAT || fs->fs_type != FS_EXFAT) { + res = put_fat(fs, clst, 0); /* Mark the cluster 'free' on the FAT */ + if (res != FR_OK) return res; + } + if (fs->free_clst < fs->n_fatent - 2) { /* Update FSINFO */ + fs->free_clst++; + fs->fsi_flag |= 1; + } +#if _FS_EXFAT || _USE_TRIM + if (ecl + 1 == nxt) { /* Is next cluster contiguous? */ + ecl = nxt; + } else { /* End of contiguous cluster block */ +#if _FS_EXFAT + if (fs->fs_type == FS_EXFAT) { + res = change_bitmap(fs, scl, ecl - scl + 1, 0); /* Mark the cluster block 'free' on the bitmap */ + if (res != FR_OK) return res; + } +#endif +#if _USE_TRIM + rt[0] = clust2sect(fs, scl); /* Start sector */ + rt[1] = clust2sect(fs, ecl) + fs->csize - 1; /* End sector */ + disk_ioctl(fs->drv, CTRL_TRIM, rt); /* Inform device the block can be erased */ +#endif + scl = ecl = nxt; + } +#endif + clst = nxt; /* Next cluster */ + } while (clst < fs->n_fatent); /* Repeat while not the last link */ + +#if _FS_EXFAT + if (fs->fs_type == FS_EXFAT) { + if (pclst == 0) { /* Does the object have no chain? */ + obj->stat = 0; /* Change the object status 'initial' */ + } else { + if (obj->stat == 3 && pclst >= obj->sclust && pclst <= obj->sclust + obj->n_cont) { /* Did the chain get contiguous? */ + obj->stat = 2; /* Change the object status 'contiguous' */ + } + } + } +#endif + return FR_OK; +} + + + + +/*-----------------------------------------------------------------------*/ +/* FAT handling - Stretch a chain or Create a new chain */ +/*-----------------------------------------------------------------------*/ +static +DWORD create_chain ( /* 0:No free cluster, 1:Internal error, 0xFFFFFFFF:Disk error, >=2:New cluster# */ + _FDID* obj, /* Corresponding object */ + DWORD clst /* Cluster# to stretch, 0:Create a new chain */ +) +{ + DWORD cs, ncl, scl; + FRESULT res; + FATFS *fs = obj->fs; + + + if (clst == 0) { /* Create a new chain */ + scl = fs->last_clst; /* Get suggested cluster to start from */ + if (scl == 0 || scl >= fs->n_fatent) scl = 1; + } + else { /* Stretch current chain */ + cs = get_fat(obj, clst); /* Check the cluster status */ + if (cs < 2) return 1; /* Invalid FAT value */ + if (cs == 0xFFFFFFFF) return cs; /* A disk error occurred */ + if (cs < fs->n_fatent) return cs; /* It is already followed by next cluster */ + scl = clst; + } + +#if _FS_EXFAT + if (fs->fs_type == FS_EXFAT) { /* On the exFAT volume */ + ncl = find_bitmap(fs, scl, 1); /* Find a free cluster */ + if (ncl == 0 || ncl == 0xFFFFFFFF) return ncl; /* No free cluster or hard error? */ + res = change_bitmap(fs, ncl, 1, 1); /* Mark the cluster 'in use' */ + if (res == FR_INT_ERR) return 1; + if (res == FR_DISK_ERR) return 0xFFFFFFFF; + if (clst == 0) { /* Is it a new chain? */ + obj->stat = 2; /* Set status 'contiguous' */ + } else { /* It is a stretched chain */ + if (obj->stat == 2 && ncl != scl + 1) { /* Is the chain got fragmented? */ + obj->n_cont = scl - obj->sclust; /* Set size of the contiguous part */ + obj->stat = 3; /* Change status 'just fragmented' */ + } + } + if (obj->stat != 2) { /* Is the file non-contiguous? */ + if (ncl == clst + 1) { /* Is the cluster next to previous one? */ + obj->n_frag = obj->n_frag ? obj->n_frag + 1 : 2; /* Increment size of last framgent */ + } else { /* New fragment */ + if (obj->n_frag == 0) obj->n_frag = 1; + res = fill_last_frag(obj, clst, ncl); /* Fill last fragment on the FAT and link it to new one */ + if (res == FR_OK) obj->n_frag = 1; + } + } + } else +#endif + { /* On the FAT12/16/32 volume */ + ncl = scl; /* Start cluster */ + for (;;) { + ncl++; /* Next cluster */ + if (ncl >= fs->n_fatent) { /* Check wrap-around */ + ncl = 2; + if (ncl > scl) return 0; /* No free cluster */ + } + cs = get_fat(obj, ncl); /* Get the cluster status */ + if (cs == 0) break; /* Found a free cluster */ + if (cs == 1 || cs == 0xFFFFFFFF) return cs; /* An error occurred */ + if (ncl == scl) return 0; /* No free cluster */ + } + res = put_fat(fs, ncl, 0xFFFFFFFF); /* Mark the new cluster 'EOC' */ + if (res == FR_OK && clst != 0) { + res = put_fat(fs, clst, ncl); /* Link it from the previous one if needed */ + } + } + + if (res == FR_OK) { /* Update FSINFO if function succeeded. */ + fs->last_clst = ncl; + if (fs->free_clst <= fs->n_fatent - 2) fs->free_clst--; + fs->fsi_flag |= 1; + } else { + ncl = (res == FR_DISK_ERR) ? 0xFFFFFFFF : 1; /* Failed. Generate error status */ + } + + return ncl; /* Return new cluster number or error status */ +} + +#endif /* !_FS_READONLY */ + + + + +#if _USE_FASTSEEK +/*-----------------------------------------------------------------------*/ +/* FAT handling - Convert offset into cluster with link map table */ +/*-----------------------------------------------------------------------*/ + +static +DWORD clmt_clust ( /* <2:Error, >=2:Cluster number */ + FIL* fp, /* Pointer to the file object */ + FSIZE_t ofs /* File offset to be converted to cluster# */ +) +{ + DWORD cl, ncl, *tbl; + FATFS *fs = fp->obj.fs; + + + tbl = fp->cltbl + 1; /* Top of CLMT */ + cl = (DWORD)(ofs / SS(fs) / fs->csize); /* Cluster order from top of the file */ + for (;;) { + ncl = *tbl++; /* Number of cluters in the fragment */ + if (ncl == 0) return 0; /* End of table? (error) */ + if (cl < ncl) break; /* In this fragment? */ + cl -= ncl; tbl++; /* Next fragment */ + } + return cl + *tbl; /* Return the cluster number */ +} + +#endif /* _USE_FASTSEEK */ + + + + +/*-----------------------------------------------------------------------*/ +/* Directory handling - Set directory index */ +/*-----------------------------------------------------------------------*/ + +static +FRESULT dir_sdi ( /* FR_OK(0):succeeded, !=0:error */ + DIR* dp, /* Pointer to directory object */ + DWORD ofs /* Offset of directory table */ +) +{ + DWORD csz, clst; + FATFS *fs = dp->obj.fs; + + + if (ofs >= (DWORD)((_FS_EXFAT && fs->fs_type == FS_EXFAT) ? MAX_DIR_EX : MAX_DIR) || ofs % SZDIRE) { /* Check range of offset and alignment */ + return FR_INT_ERR; + } + dp->dptr = ofs; /* Set current offset */ + clst = dp->obj.sclust; /* Table start cluster (0:root) */ + if (clst == 0 && fs->fs_type >= FS_FAT32) { /* Replace cluster# 0 with root cluster# */ + clst = fs->dirbase; + if (_FS_EXFAT) dp->obj.stat = 0; /* exFAT: Root dir has an FAT chain */ + } + + if (clst == 0) { /* Static table (root-directory in FAT12/16) */ + if (ofs / SZDIRE >= fs->n_rootdir) return FR_INT_ERR; /* Is index out of range? */ + dp->sect = fs->dirbase; + + } else { /* Dynamic table (sub-directory or root-directory in FAT32+) */ + csz = (DWORD)fs->csize * SS(fs); /* Bytes per cluster */ + while (ofs >= csz) { /* Follow cluster chain */ + clst = get_fat(&dp->obj, clst); /* Get next cluster */ + if (clst == 0xFFFFFFFF) return FR_DISK_ERR; /* Disk error */ + if (clst < 2 || clst >= fs->n_fatent) return FR_INT_ERR; /* Reached to end of table or internal error */ + ofs -= csz; + } + dp->sect = clust2sect(fs, clst); + } + dp->clust = clst; /* Current cluster# */ + if (!dp->sect) return FR_INT_ERR; + dp->sect += ofs / SS(fs); /* Sector# of the directory entry */ + dp->dir = fs->win + (ofs % SS(fs)); /* Pointer to the entry in the win[] */ + + return FR_OK; +} + + + + +/*-----------------------------------------------------------------------*/ +/* Directory handling - Move directory table index next */ +/*-----------------------------------------------------------------------*/ + +static +FRESULT dir_next ( /* FR_OK(0):succeeded, FR_NO_FILE:End of table, FR_DENIED:Could not stretch */ + DIR* dp, /* Pointer to the directory object */ + int stretch /* 0: Do not stretch table, 1: Stretch table if needed */ +) +{ + DWORD ofs, clst; + FATFS *fs = dp->obj.fs; +#if !_FS_READONLY + UINT n; +#endif + + ofs = dp->dptr + SZDIRE; /* Next entry */ + if (!dp->sect || ofs >= (DWORD)((_FS_EXFAT && fs->fs_type == FS_EXFAT) ? MAX_DIR_EX : MAX_DIR)) return FR_NO_FILE; /* Report EOT when offset has reached max value */ + + if (ofs % SS(fs) == 0) { /* Sector changed? */ + dp->sect++; /* Next sector */ + + if (!dp->clust) { /* Static table */ + if (ofs / SZDIRE >= fs->n_rootdir) { /* Report EOT if it reached end of static table */ + dp->sect = 0; return FR_NO_FILE; + } + } + else { /* Dynamic table */ + if ((ofs / SS(fs) & (fs->csize - 1)) == 0) { /* Cluster changed? */ + clst = get_fat(&dp->obj, dp->clust); /* Get next cluster */ + if (clst <= 1) return FR_INT_ERR; /* Internal error */ + if (clst == 0xFFFFFFFF) return FR_DISK_ERR; /* Disk error */ + if (clst >= fs->n_fatent) { /* Reached end of dynamic table */ +#if !_FS_READONLY + if (!stretch) { /* If no stretch, report EOT */ + dp->sect = 0; return FR_NO_FILE; + } + clst = create_chain(&dp->obj, dp->clust); /* Allocate a cluster */ + if (clst == 0) return FR_DENIED; /* No free cluster */ + if (clst == 1) return FR_INT_ERR; /* Internal error */ + if (clst == 0xFFFFFFFF) return FR_DISK_ERR; /* Disk error */ + /* Clean-up the stretched table */ + if (_FS_EXFAT) dp->obj.stat |= 4; /* The directory needs to be updated */ + if (sync_window(fs) != FR_OK) return FR_DISK_ERR; /* Flush disk access window */ + mem_set(fs->win, 0, SS(fs)); /* Clear window buffer */ + for (n = 0, fs->winsect = clust2sect(fs, clst); n < fs->csize; n++, fs->winsect++) { /* Fill the new cluster with 0 */ + fs->wflag = 1; + if (sync_window(fs) != FR_OK) return FR_DISK_ERR; + } + fs->winsect -= n; /* Restore window offset */ +#else + if (!stretch) dp->sect = 0; /* (this line is to suppress compiler warning) */ + dp->sect = 0; return FR_NO_FILE; /* Report EOT */ +#endif + } + dp->clust = clst; /* Initialize data for new cluster */ + dp->sect = clust2sect(fs, clst); + } + } + } + dp->dptr = ofs; /* Current entry */ + dp->dir = fs->win + ofs % SS(fs); /* Pointer to the entry in the win[] */ + + return FR_OK; +} + + + + +#if !_FS_READONLY +/*-----------------------------------------------------------------------*/ +/* Directory handling - Reserve a block of directory entries */ +/*-----------------------------------------------------------------------*/ + +static +FRESULT dir_alloc ( /* FR_OK(0):succeeded, !=0:error */ + DIR* dp, /* Pointer to the directory object */ + UINT nent /* Number of contiguous entries to allocate */ +) +{ + FRESULT res; + UINT n; + FATFS *fs = dp->obj.fs; + + + res = dir_sdi(dp, 0); + if (res == FR_OK) { + n = 0; + do { + res = move_window(fs, dp->sect); + if (res != FR_OK) break; +#if _FS_EXFAT + if ((fs->fs_type == FS_EXFAT) ? (int)((dp->dir[XDIR_Type] & 0x80) == 0) : (int)(dp->dir[DIR_Name] == DDEM || dp->dir[DIR_Name] == 0)) { +#else + if (dp->dir[DIR_Name] == DDEM || dp->dir[DIR_Name] == 0) { +#endif + if (++n == nent) break; /* A block of contiguous free entries is found */ + } else { + n = 0; /* Not a blank entry. Restart to search */ + } + res = dir_next(dp, 1); + } while (res == FR_OK); /* Next entry with table stretch enabled */ + } + + if (res == FR_NO_FILE) res = FR_DENIED; /* No directory entry to allocate */ + return res; +} + +#endif /* !_FS_READONLY */ + + + + +/*-----------------------------------------------------------------------*/ +/* FAT: Directory handling - Load/Store start cluster number */ +/*-----------------------------------------------------------------------*/ + +static +DWORD ld_clust ( /* Returns the top cluster value of the SFN entry */ + FATFS* fs, /* Pointer to the fs object */ + const BYTE* dir /* Pointer to the key entry */ +) +{ + DWORD cl; + + cl = ld_word(dir + DIR_FstClusLO); + if (fs->fs_type == FS_FAT32) { + cl |= (DWORD)ld_word(dir + DIR_FstClusHI) << 16; + } + + return cl; +} + + +#if !_FS_READONLY +static +void st_clust ( + FATFS* fs, /* Pointer to the fs object */ + BYTE* dir, /* Pointer to the key entry */ + DWORD cl /* Value to be set */ +) +{ + st_word(dir + DIR_FstClusLO, (WORD)cl); + if (fs->fs_type == FS_FAT32) { + st_word(dir + DIR_FstClusHI, (WORD)(cl >> 16)); + } +} +#endif + + + +#if _USE_LFN != 0 +/*------------------------------------------------------------------------*/ +/* FAT-LFN: LFN handling */ +/*------------------------------------------------------------------------*/ +static +const BYTE LfnOfs[] = {1,3,5,7,9,14,16,18,20,22,24,28,30}; /* Offset of LFN characters in the directory entry */ + + +/*--------------------------------------------------------*/ +/* FAT-LFN: Compare a part of file name with an LFN entry */ +/*--------------------------------------------------------*/ +static +int cmp_lfn ( /* 1:matched, 0:not matched */ + const WCHAR* lfnbuf, /* Pointer to the LFN working buffer to be compared */ + BYTE* dir /* Pointer to the directory entry containing the part of LFN */ +) +{ + UINT i, s; + WCHAR wc, uc; + + + if (ld_word(dir + LDIR_FstClusLO) != 0) return 0; /* Check LDIR_FstClusLO */ + + i = ((dir[LDIR_Ord] & 0x3F) - 1) * 13; /* Offset in the LFN buffer */ + + for (wc = 1, s = 0; s < 13; s++) { /* Process all characters in the entry */ + uc = ld_word(dir + LfnOfs[s]); /* Pick an LFN character */ + if (wc) { + if (i >= _MAX_LFN || ff_wtoupper(uc) != ff_wtoupper(lfnbuf[i++])) { /* Compare it */ + return 0; /* Not matched */ + } + wc = uc; + } else { + if (uc != 0xFFFF) return 0; /* Check filler */ + } + } + + if ((dir[LDIR_Ord] & LLEF) && wc && lfnbuf[i]) return 0; /* Last segment matched but different length */ + + return 1; /* The part of LFN matched */ +} + + +#if _FS_MINIMIZE <= 1 || _FS_RPATH >= 2 || _USE_LABEL || _FS_EXFAT +/*-----------------------------------------------------*/ +/* FAT-LFN: Pick a part of file name from an LFN entry */ +/*-----------------------------------------------------*/ +static +int pick_lfn ( /* 1:succeeded, 0:buffer overflow or invalid LFN entry */ + WCHAR* lfnbuf, /* Pointer to the LFN working buffer */ + BYTE* dir /* Pointer to the LFN entry */ +) +{ + UINT i, s; + WCHAR wc, uc; + + + if (ld_word(dir + LDIR_FstClusLO) != 0) return 0; /* Check LDIR_FstClusLO is 0 */ + + i = ((dir[LDIR_Ord] & ~LLEF) - 1) * 13; /* Offset in the LFN buffer */ + + for (wc = 1, s = 0; s < 13; s++) { /* Process all characters in the entry */ + uc = ld_word(dir + LfnOfs[s]); /* Pick an LFN character */ + if (wc) { + if (i >= _MAX_LFN) return 0; /* Buffer overflow? */ + lfnbuf[i++] = wc = uc; /* Store it */ + } else { + if (uc != 0xFFFF) return 0; /* Check filler */ + } + } + + if (dir[LDIR_Ord] & LLEF) { /* Put terminator if it is the last LFN part */ + if (i >= _MAX_LFN) return 0; /* Buffer overflow? */ + lfnbuf[i] = 0; + } + + return 1; /* The part of LFN is valid */ +} +#endif + + +#if !_FS_READONLY +/*-----------------------------------------*/ +/* FAT-LFN: Create an entry of LFN entries */ +/*-----------------------------------------*/ +static +void put_lfn ( + const WCHAR* lfn, /* Pointer to the LFN */ + BYTE* dir, /* Pointer to the LFN entry to be created */ + BYTE ord, /* LFN order (1-20) */ + BYTE sum /* Checksum of the corresponding SFN */ +) +{ + UINT i, s; + WCHAR wc; + + + dir[LDIR_Chksum] = sum; /* Set checksum */ + dir[LDIR_Attr] = AM_LFN; /* Set attribute. LFN entry */ + dir[LDIR_Type] = 0; + st_word(dir + LDIR_FstClusLO, 0); + + i = (ord - 1) * 13; /* Get offset in the LFN working buffer */ + s = wc = 0; + do { + if (wc != 0xFFFF) wc = lfn[i++]; /* Get an effective character */ + st_word(dir + LfnOfs[s], wc); /* Put it */ + if (wc == 0) wc = 0xFFFF; /* Padding characters for left locations */ + } while (++s < 13); + if (wc == 0xFFFF || !lfn[i]) ord |= LLEF; /* Last LFN part is the start of LFN sequence */ + dir[LDIR_Ord] = ord; /* Set the LFN order */ +} + +#endif /* !_FS_READONLY */ +#endif /* _USE_LFN != 0 */ + + + +#if _USE_LFN != 0 && !_FS_READONLY +/*-----------------------------------------------------------------------*/ +/* FAT-LFN: Create a Numbered SFN */ +/*-----------------------------------------------------------------------*/ + +static +void gen_numname ( + BYTE* dst, /* Pointer to the buffer to store numbered SFN */ + const BYTE* src, /* Pointer to SFN */ + const WCHAR* lfn, /* Pointer to LFN */ + UINT seq /* Sequence number */ +) +{ + BYTE ns[8], c; + UINT i, j; + WCHAR wc; + DWORD sr; + + + mem_cpy(dst, src, 11); + + if (seq > 5) { /* In case of many collisions, generate a hash number instead of sequential number */ + sr = seq; + while (*lfn) { /* Create a CRC */ + wc = *lfn++; + for (i = 0; i < 16; i++) { + sr = (sr << 1) + (wc & 1); + wc >>= 1; + if (sr & 0x10000) sr ^= 0x11021; + } + } + seq = (UINT)sr; + } + + /* itoa (hexdecimal) */ + i = 7; + do { + c = (BYTE)((seq % 16) + '0'); + if (c > '9') c += 7; + ns[i--] = c; + seq /= 16; + } while (seq); + ns[i] = '~'; + + /* Append the number */ + for (j = 0; j < i && dst[j] != ' '; j++) { + if (IsDBCS1(dst[j])) { + if (j == i - 1) break; + j++; + } + } + do { + dst[j++] = (i < 8) ? ns[i++] : ' '; + } while (j < 8); +} +#endif /* _USE_LFN != 0 && !_FS_READONLY */ + + + +#if _USE_LFN != 0 +/*-----------------------------------------------------------------------*/ +/* FAT-LFN: Calculate checksum of an SFN entry */ +/*-----------------------------------------------------------------------*/ + +static +BYTE sum_sfn ( + const BYTE* dir /* Pointer to the SFN entry */ +) +{ + BYTE sum = 0; + UINT n = 11; + + do { + sum = (sum >> 1) + (sum << 7) + *dir++; + } while (--n); + return sum; +} + +#endif /* _USE_LFN != 0 */ + + + +#if _FS_EXFAT +/*-----------------------------------------------------------------------*/ +/* exFAT: Checksum */ +/*-----------------------------------------------------------------------*/ + +static +WORD xdir_sum ( /* Get checksum of the directoly block */ + const BYTE* dir /* Directory entry block to be calculated */ +) +{ + UINT i, szblk; + WORD sum; + + + szblk = (dir[XDIR_NumSec] + 1) * SZDIRE; + for (i = sum = 0; i < szblk; i++) { + if (i == XDIR_SetSum) { /* Skip sum field */ + i++; + } else { + sum = ((sum & 1) ? 0x8000 : 0) + (sum >> 1) + dir[i]; + } + } + return sum; +} + + + +static +WORD xname_sum ( /* Get check sum (to be used as hash) of the name */ + const WCHAR* name /* File name to be calculated */ +) +{ + WCHAR chr; + WORD sum = 0; + + + while ((chr = *name++) != 0) { + chr = ff_wtoupper(chr); /* File name needs to be ignored case */ + sum = ((sum & 1) ? 0x8000 : 0) + (sum >> 1) + (chr & 0xFF); + sum = ((sum & 1) ? 0x8000 : 0) + (sum >> 1) + (chr >> 8); + } + return sum; +} + + +#if !_FS_READONLY && _USE_MKFS +static +DWORD xsum32 ( + BYTE dat, /* Data to be sumed */ + DWORD sum /* Previous value */ +) +{ + sum = ((sum & 1) ? 0x80000000 : 0) + (sum >> 1) + dat; + return sum; +} +#endif + + +#if _FS_MINIMIZE <= 1 || _FS_RPATH >= 2 +/*------------------------------------------------------*/ +/* exFAT: Get object information from a directory block */ +/*------------------------------------------------------*/ + +static +void get_xdir_info ( + BYTE* dirb, /* Pointer to the direcotry entry block 85+C0+C1s */ + FILINFO* fno /* Buffer to store the extracted file information */ +) +{ + UINT di, si; + WCHAR w; +#if !_LFN_UNICODE + UINT nc; +#endif + + /* Get file name */ + di = 0; +#if _LFN_UNICODE + for (si = SZDIRE * 2; di < dirb[XDIR_NumName]; si += 2, di++) { + if ((si % SZDIRE) == 0) si += 2; /* Skip entry type field */ + w = ld_word(dirb + si); /* Get a character */ + if (di >= _MAX_LFN) { di = 0; break; } /* Buffer overflow --> inaccessible object name */ + fno->fname[di] = w; /* Store it */ + } +#else + for (si = SZDIRE * 2, nc = 0; nc < dirb[XDIR_NumName]; si += 2, nc++) { + if ((si % SZDIRE) == 0) si += 2; /* Skip entry type field */ + w = ff_convert(ld_word(dirb + si), 0); /* Get a character and Unicode -> OEM */ + if (_DF1S && w >= 0x100) { /* Is it a double byte char? (always false at SBCS cfg) */ + fno->fname[di++] = (char)(w >> 8); /* Put 1st byte of the DBC */ + } + if (w == 0 || di >= _MAX_LFN) { di = 0; break; } /* Invalid char or buffer overflow --> inaccessible object name */ + fno->fname[di++] = (char)w; + } +#endif + if (di == 0) fno->fname[di++] = '?'; /* Inaccessible object name? */ + fno->fname[di] = 0; /* Terminate file name */ + + fno->altname[0] = 0; /* No SFN */ + fno->fattrib = dirb[XDIR_Attr]; /* Attribute */ + fno->fsize = (fno->fattrib & AM_DIR) ? 0 : ld_qword(dirb + XDIR_FileSize); /* Size */ + fno->ftime = ld_word(dirb + XDIR_ModTime + 0); /* Time */ + fno->fdate = ld_word(dirb + XDIR_ModTime + 2); /* Date */ +} + +#endif /* _FS_MINIMIZE <= 1 || _FS_RPATH >= 2 */ + + +/*-----------------------------------*/ +/* exFAT: Get a directry entry block */ +/*-----------------------------------*/ + +static +FRESULT load_xdir ( /* FR_INT_ERR: invalid entry block */ + DIR* dp /* Pointer to the reading direcotry object pointing the 85 entry */ +) +{ + FRESULT res; + UINT i, sz_ent; + BYTE* dirb = dp->obj.fs->dirbuf; /* Pointer to the on-memory direcotry entry block 85+C0+C1s */ + + + /* Load 85 entry */ + res = move_window(dp->obj.fs, dp->sect); + if (res != FR_OK) return res; + if (dp->dir[XDIR_Type] != 0x85) return FR_INT_ERR; + mem_cpy(dirb + 0, dp->dir, SZDIRE); + sz_ent = (dirb[XDIR_NumSec] + 1) * SZDIRE; + if (sz_ent < 3 * SZDIRE || sz_ent > 19 * SZDIRE) return FR_INT_ERR; + + /* Load C0 entry */ + res = dir_next(dp, 0); + if (res != FR_OK) return res; + res = move_window(dp->obj.fs, dp->sect); + if (res != FR_OK) return res; + if (dp->dir[XDIR_Type] != 0xC0) return FR_INT_ERR; + mem_cpy(dirb + SZDIRE, dp->dir, SZDIRE); + if (MAXDIRB(dirb[XDIR_NumName]) > sz_ent) return FR_INT_ERR; + + /* Load C1 entries */ + i = SZDIRE * 2; /* C1 offset */ + do { + res = dir_next(dp, 0); + if (res != FR_OK) return res; + res = move_window(dp->obj.fs, dp->sect); + if (res != FR_OK) return res; + if (dp->dir[XDIR_Type] != 0xC1) return FR_INT_ERR; + if (i < MAXDIRB(_MAX_LFN)) mem_cpy(dirb + i, dp->dir, SZDIRE); + } while ((i += SZDIRE) < sz_ent); + + /* Sanity check (do it when accessible object name) */ + if (i <= MAXDIRB(_MAX_LFN)) { + if (xdir_sum(dirb) != ld_word(dirb + XDIR_SetSum)) return FR_INT_ERR; + } + return FR_OK; +} + + +#if !_FS_READONLY || _FS_RPATH != 0 +/*------------------------------------------------*/ +/* exFAT: Load the object's directory entry block */ +/*------------------------------------------------*/ +static +FRESULT load_obj_dir ( + DIR* dp, /* Blank directory object to be used to access containing direcotry */ + const _FDID* obj /* Object with its containing directory information */ +) +{ + FRESULT res; + + /* Open object containing directory */ + dp->obj.fs = obj->fs; + dp->obj.sclust = obj->c_scl; + dp->obj.stat = (BYTE)obj->c_size; + dp->obj.objsize = obj->c_size & 0xFFFFFF00; + dp->blk_ofs = obj->c_ofs; + + res = dir_sdi(dp, dp->blk_ofs); /* Goto object's entry block */ + if (res == FR_OK) { + res = load_xdir(dp); /* Load the object's entry block */ + } + return res; +} +#endif + + +#if !_FS_READONLY +/*-----------------------------------------------*/ +/* exFAT: Store the directory block to the media */ +/*-----------------------------------------------*/ +static +FRESULT store_xdir ( + DIR* dp /* Pointer to the direcotry object */ +) +{ + FRESULT res; + UINT nent; + BYTE* dirb = dp->obj.fs->dirbuf; /* Pointer to the direcotry entry block 85+C0+C1s */ + + /* Create set sum */ + st_word(dirb + XDIR_SetSum, xdir_sum(dirb)); + nent = dirb[XDIR_NumSec] + 1; + + /* Store the set of directory to the volume */ + res = dir_sdi(dp, dp->blk_ofs); + while (res == FR_OK) { + res = move_window(dp->obj.fs, dp->sect); + if (res != FR_OK) break; + mem_cpy(dp->dir, dirb, SZDIRE); + dp->obj.fs->wflag = 1; + if (--nent == 0) break; + dirb += SZDIRE; + res = dir_next(dp, 0); + } + return (res == FR_OK || res == FR_DISK_ERR) ? res : FR_INT_ERR; +} + + + +/*-------------------------------------------*/ +/* exFAT: Create a new directory enrty block */ +/*-------------------------------------------*/ + +static +void create_xdir ( + BYTE* dirb, /* Pointer to the direcotry entry block buffer */ + const WCHAR* lfn /* Pointer to the nul terminated file name */ +) +{ + UINT i; + BYTE nb, nc; + WCHAR chr; + + + /* Create 85+C0 entry */ + mem_set(dirb, 0, 2 * SZDIRE); + dirb[XDIR_Type] = 0x85; + dirb[XDIR_Type + SZDIRE] = 0xC0; + + /* Create C1 entries */ + nc = 0; nb = 1; chr = 1; i = SZDIRE * 2; + do { + dirb[i++] = 0xC1; dirb[i++] = 0; /* Entry type C1 */ + do { /* Fill name field */ + if (chr && (chr = lfn[nc]) != 0) nc++; /* Get a character if exist */ + st_word(dirb + i, chr); /* Store it */ + } while ((i += 2) % SZDIRE != 0); + nb++; + } while (lfn[nc]); /* Fill next entry if any char follows */ + + dirb[XDIR_NumName] = nc; /* Set name length */ + dirb[XDIR_NumSec] = nb; /* Set block length */ + st_word(dirb + XDIR_NameHash, xname_sum(lfn)); /* Set name hash */ +} + +#endif /* !_FS_READONLY */ +#endif /* _FS_EXFAT */ + + + +#if _FS_MINIMIZE <= 1 || _FS_RPATH >= 2 || _USE_LABEL || _FS_EXFAT +/*-----------------------------------------------------------------------*/ +/* Read an object from the directory */ +/*-----------------------------------------------------------------------*/ + +static +FRESULT dir_read ( + DIR* dp, /* Pointer to the directory object */ + int vol /* Filtered by 0:file/directory or 1:volume label */ +) +{ + FRESULT res = FR_NO_FILE; + FATFS *fs = dp->obj.fs; + BYTE a, c; +#if _USE_LFN != 0 + BYTE ord = 0xFF, sum = 0xFF; +#endif + + while (dp->sect) { + res = move_window(fs, dp->sect); + if (res != FR_OK) break; + c = dp->dir[DIR_Name]; /* Test for the entry type */ + if (c == 0) { + res = FR_NO_FILE; break; /* Reached to end of the directory */ + } +#if _FS_EXFAT + if (fs->fs_type == FS_EXFAT) { /* On the exFAT volume */ + if (_USE_LABEL && vol) { + if (c == 0x83) break; /* Volume label entry? */ + } else { + if (c == 0x85) { /* Start of the file entry block? */ + dp->blk_ofs = dp->dptr; /* Get location of the block */ + res = load_xdir(dp); /* Load the entry block */ + if (res == FR_OK) { + dp->obj.attr = fs->dirbuf[XDIR_Attr] & AM_MASK; /* Get attribute */ + } + break; + } + } + } else +#endif + { /* On the FAT12/16/32 volume */ + dp->obj.attr = a = dp->dir[DIR_Attr] & AM_MASK; /* Get attribute */ +#if _USE_LFN != 0 /* LFN configuration */ + if (c == DDEM || c == '.' || (int)((a & ~AM_ARC) == AM_VOL) != vol) { /* An entry without valid data */ + ord = 0xFF; + } else { + if (a == AM_LFN) { /* An LFN entry is found */ + if (c & LLEF) { /* Is it start of an LFN sequence? */ + sum = dp->dir[LDIR_Chksum]; + c &= (BYTE)~LLEF; ord = c; + dp->blk_ofs = dp->dptr; + } + /* Check LFN validity and capture it */ + ord = (c == ord && sum == dp->dir[LDIR_Chksum] && pick_lfn(fs->lfnbuf, dp->dir)) ? ord - 1 : 0xFF; + } else { /* An SFN entry is found */ + if (ord || sum != sum_sfn(dp->dir)) { /* Is there a valid LFN? */ + dp->blk_ofs = 0xFFFFFFFF; /* It has no LFN. */ + } + break; + } + } +#else /* Non LFN configuration */ + if (c != DDEM && c != '.' && a != AM_LFN && (int)((a & ~AM_ARC) == AM_VOL) == vol) { /* Is it a valid entry? */ + break; + } +#endif + } + res = dir_next(dp, 0); /* Next entry */ + if (res != FR_OK) break; + } + + if (res != FR_OK) dp->sect = 0; /* Terminate the read operation on error or EOT */ + return res; +} + +#endif /* _FS_MINIMIZE <= 1 || _USE_LABEL || _FS_RPATH >= 2 */ + + + +/*-----------------------------------------------------------------------*/ +/* Directory handling - Find an object in the directory */ +/*-----------------------------------------------------------------------*/ + +static +FRESULT dir_find ( /* FR_OK(0):succeeded, !=0:error */ + DIR* dp /* Pointer to the directory object with the file name */ +) +{ + FRESULT res; + FATFS *fs = dp->obj.fs; + BYTE c; +#if _USE_LFN != 0 + BYTE a, ord, sum; +#endif + + res = dir_sdi(dp, 0); /* Rewind directory object */ + if (res != FR_OK) return res; +#if _FS_EXFAT + if (fs->fs_type == FS_EXFAT) { /* On the exFAT volume */ + BYTE nc; + UINT di, ni; + WORD hash = xname_sum(fs->lfnbuf); /* Hash value of the name to find */ + + while ((res = dir_read(dp, 0)) == FR_OK) { /* Read an item */ +#if _MAX_LFN < 255 + if (fs->dirbuf[XDIR_NumName] > _MAX_LFN) continue; /* Skip comparison if inaccessible object name */ +#endif + if (ld_word(fs->dirbuf + XDIR_NameHash) != hash) continue; /* Skip comparison if hash mismatched */ + for (nc = fs->dirbuf[XDIR_NumName], di = SZDIRE * 2, ni = 0; nc; nc--, di += 2, ni++) { /* Compare the name */ + if ((di % SZDIRE) == 0) di += 2; + if (ff_wtoupper(ld_word(fs->dirbuf + di)) != ff_wtoupper(fs->lfnbuf[ni])) break; + } + if (nc == 0 && !fs->lfnbuf[ni]) break; /* Name matched? */ + } + return res; + } +#endif + /* On the FAT12/16/32 volume */ +#if _USE_LFN != 0 + ord = sum = 0xFF; dp->blk_ofs = 0xFFFFFFFF; /* Reset LFN sequence */ +#endif + do { + res = move_window(fs, dp->sect); + if (res != FR_OK) break; + c = dp->dir[DIR_Name]; + if (c == 0) { res = FR_NO_FILE; break; } /* Reached to end of table */ +#if _USE_LFN != 0 /* LFN configuration */ + dp->obj.attr = a = dp->dir[DIR_Attr] & AM_MASK; + if (c == DDEM || ((a & AM_VOL) && a != AM_LFN)) { /* An entry without valid data */ + ord = 0xFF; dp->blk_ofs = 0xFFFFFFFF; /* Reset LFN sequence */ + } else { + if (a == AM_LFN) { /* An LFN entry is found */ + if (!(dp->fn[NSFLAG] & NS_NOLFN)) { + if (c & LLEF) { /* Is it start of LFN sequence? */ + sum = dp->dir[LDIR_Chksum]; + c &= (BYTE)~LLEF; ord = c; /* LFN start order */ + dp->blk_ofs = dp->dptr; /* Start offset of LFN */ + } + /* Check validity of the LFN entry and compare it with given name */ + ord = (c == ord && sum == dp->dir[LDIR_Chksum] && cmp_lfn(fs->lfnbuf, dp->dir)) ? ord - 1 : 0xFF; + } + } else { /* An SFN entry is found */ + if (!ord && sum == sum_sfn(dp->dir)) break; /* LFN matched? */ + if (!(dp->fn[NSFLAG] & NS_LOSS) && !mem_cmp(dp->dir, dp->fn, 11)) break; /* SFN matched? */ + ord = 0xFF; dp->blk_ofs = 0xFFFFFFFF; /* Reset LFN sequence */ + } + } +#else /* Non LFN configuration */ + dp->obj.attr = dp->dir[DIR_Attr] & AM_MASK; + if (!(dp->dir[DIR_Attr] & AM_VOL) && !mem_cmp(dp->dir, dp->fn, 11)) break; /* Is it a valid entry? */ +#endif + res = dir_next(dp, 0); /* Next entry */ + } while (res == FR_OK); + + return res; +} + + + + +#if !_FS_READONLY +/*-----------------------------------------------------------------------*/ +/* Register an object to the directory */ +/*-----------------------------------------------------------------------*/ + +static +FRESULT dir_register ( /* FR_OK:succeeded, FR_DENIED:no free entry or too many SFN collision, FR_DISK_ERR:disk error */ + DIR* dp /* Target directory with object name to be created */ +) +{ + FRESULT res; + FATFS *fs = dp->obj.fs; +#if _USE_LFN != 0 /* LFN configuration */ + UINT n, nlen, nent; + BYTE sn[12], sum; + + + if (dp->fn[NSFLAG] & (NS_DOT | NS_NONAME)) return FR_INVALID_NAME; /* Check name validity */ + for (nlen = 0; fs->lfnbuf[nlen]; nlen++) ; /* Get lfn length */ + +#if _FS_EXFAT + if (fs->fs_type == FS_EXFAT) { /* On the exFAT volume */ + DIR dj; + + nent = (nlen + 14) / 15 + 2; /* Number of entries to allocate (85+C0+C1s) */ + res = dir_alloc(dp, nent); /* Allocate entries */ + if (res != FR_OK) return res; + dp->blk_ofs = dp->dptr - SZDIRE * (nent - 1); /* Set the allocated entry block offset */ + + if (dp->obj.sclust != 0 && (dp->obj.stat & 4)) { /* Has the sub-directory been stretched? */ + dp->obj.objsize += (DWORD)fs->csize * SS(fs); /* Increase the directory size by cluster size */ + res = fill_first_frag(&dp->obj); /* Fill first fragment on the FAT if needed */ + if (res != FR_OK) return res; + res = fill_last_frag(&dp->obj, dp->clust, 0xFFFFFFFF); /* Fill last fragment on the FAT if needed */ + if (res != FR_OK) return res; + res = load_obj_dir(&dj, &dp->obj); /* Load the object status */ + if (res != FR_OK) return res; + st_qword(fs->dirbuf + XDIR_FileSize, dp->obj.objsize); /* Update the allocation status */ + st_qword(fs->dirbuf + XDIR_ValidFileSize, dp->obj.objsize); + fs->dirbuf[XDIR_GenFlags] = dp->obj.stat | 1; + res = store_xdir(&dj); /* Store the object status */ + if (res != FR_OK) return res; + } + + create_xdir(fs->dirbuf, fs->lfnbuf); /* Create on-memory directory block to be written later */ + return FR_OK; + } +#endif + /* On the FAT12/16/32 volume */ + mem_cpy(sn, dp->fn, 12); + if (sn[NSFLAG] & NS_LOSS) { /* When LFN is out of 8.3 format, generate a numbered name */ + dp->fn[NSFLAG] = NS_NOLFN; /* Find only SFN */ + for (n = 1; n < 100; n++) { + gen_numname(dp->fn, sn, fs->lfnbuf, n); /* Generate a numbered name */ + res = dir_find(dp); /* Check if the name collides with existing SFN */ + if (res != FR_OK) break; + } + if (n == 100) return FR_DENIED; /* Abort if too many collisions */ + if (res != FR_NO_FILE) return res; /* Abort if the result is other than 'not collided' */ + dp->fn[NSFLAG] = sn[NSFLAG]; + } + + /* Create an SFN with/without LFNs. */ + nent = (sn[NSFLAG] & NS_LFN) ? (nlen + 12) / 13 + 1 : 1; /* Number of entries to allocate */ + res = dir_alloc(dp, nent); /* Allocate entries */ + if (res == FR_OK && --nent) { /* Set LFN entry if needed */ + res = dir_sdi(dp, dp->dptr - nent * SZDIRE); + if (res == FR_OK) { + sum = sum_sfn(dp->fn); /* Checksum value of the SFN tied to the LFN */ + do { /* Store LFN entries in bottom first */ + res = move_window(fs, dp->sect); + if (res != FR_OK) break; + put_lfn(fs->lfnbuf, dp->dir, (BYTE)nent, sum); + fs->wflag = 1; + res = dir_next(dp, 0); /* Next entry */ + } while (res == FR_OK && --nent); + } + } + +#else /* Non LFN configuration */ + res = dir_alloc(dp, 1); /* Allocate an entry for SFN */ + +#endif + + /* Set SFN entry */ + if (res == FR_OK) { + res = move_window(fs, dp->sect); + if (res == FR_OK) { + mem_set(dp->dir, 0, SZDIRE); /* Clean the entry */ + mem_cpy(dp->dir + DIR_Name, dp->fn, 11); /* Put SFN */ +#if _USE_LFN != 0 + dp->dir[DIR_NTres] = dp->fn[NSFLAG] & (NS_BODY | NS_EXT); /* Put NT flag */ +#endif + fs->wflag = 1; + } + } + + return res; +} + +#endif /* !_FS_READONLY */ + + + +#if !_FS_READONLY && _FS_MINIMIZE == 0 +/*-----------------------------------------------------------------------*/ +/* Remove an object from the directory */ +/*-----------------------------------------------------------------------*/ + +static +FRESULT dir_remove ( /* FR_OK:Succeeded, FR_DISK_ERR:A disk error */ + DIR* dp /* Directory object pointing the entry to be removed */ +) +{ + FRESULT res; + FATFS *fs = dp->obj.fs; +#if _USE_LFN != 0 /* LFN configuration */ + DWORD last = dp->dptr; + + res = (dp->blk_ofs == 0xFFFFFFFF) ? FR_OK : dir_sdi(dp, dp->blk_ofs); /* Goto top of the entry block if LFN is exist */ + if (res == FR_OK) { + do { + res = move_window(fs, dp->sect); + if (res != FR_OK) break; + /* Mark an entry 'deleted' */ + if (_FS_EXFAT && fs->fs_type == FS_EXFAT) { /* On the exFAT volume */ + dp->dir[XDIR_Type] &= 0x7F; + } else { /* On the FAT12/16/32 volume */ + dp->dir[DIR_Name] = DDEM; + } + fs->wflag = 1; + if (dp->dptr >= last) break; /* If reached last entry then all entries of the object has been deleted. */ + res = dir_next(dp, 0); /* Next entry */ + } while (res == FR_OK); + if (res == FR_NO_FILE) res = FR_INT_ERR; + } +#else /* Non LFN configuration */ + + res = move_window(fs, dp->sect); + if (res == FR_OK) { + dp->dir[DIR_Name] = DDEM; + fs->wflag = 1; + } +#endif + + return res; +} + +#endif /* !_FS_READONLY && _FS_MINIMIZE == 0 */ + + + +#if _FS_MINIMIZE <= 1 || _FS_RPATH >= 2 +/*-----------------------------------------------------------------------*/ +/* Get file information from directory entry */ +/*-----------------------------------------------------------------------*/ + +static +void get_fileinfo ( /* No return code */ + DIR* dp, /* Pointer to the directory object */ + FILINFO* fno /* Pointer to the file information to be filled */ +) +{ + UINT i, j; + TCHAR c; + DWORD tm; +#if _USE_LFN != 0 + WCHAR w, lfv; + FATFS *fs = dp->obj.fs; +#endif + + + fno->fname[0] = 0; /* Invaidate file info */ + if (!dp->sect) return; /* Exit if read pointer has reached end of directory */ + +#if _USE_LFN != 0 /* LFN configuration */ +#if _FS_EXFAT + if (fs->fs_type == FS_EXFAT) { /* On the exFAT volume */ + get_xdir_info(fs->dirbuf, fno); + return; + } else +#endif + { /* On the FAT12/16/32 volume */ + if (dp->blk_ofs != 0xFFFFFFFF) { /* Get LFN if available */ + i = j = 0; + while ((w = fs->lfnbuf[j++]) != 0) { /* Get an LFN character */ +#if !_LFN_UNICODE + w = ff_convert(w, 0); /* Unicode -> OEM */ + if (w == 0) { i = 0; break; } /* No LFN if it could not be converted */ + if (_DF1S && w >= 0x100) { /* Put 1st byte if it is a DBC (always false at SBCS cfg) */ + fno->fname[i++] = (char)(w >> 8); + } +#endif + if (i >= _MAX_LFN) { i = 0; break; } /* No LFN if buffer overflow */ + fno->fname[i++] = (TCHAR)w; + } + fno->fname[i] = 0; /* Terminate the LFN */ + } + } + + i = j = 0; + lfv = fno->fname[i]; /* LFN is exist if non-zero */ + while (i < 11) { /* Copy name body and extension */ + c = (TCHAR)dp->dir[i++]; + if (c == ' ') continue; /* Skip padding spaces */ + if (c == RDDEM) c = (TCHAR)DDEM; /* Restore replaced DDEM character */ + if (i == 9) { /* Insert a . if extension is exist */ + if (!lfv) fno->fname[j] = '.'; + fno->altname[j++] = '.'; + } +#if _LFN_UNICODE + if (IsDBCS1(c) && i != 8 && i != 11 && IsDBCS2(dp->dir[i])) { + c = c << 8 | dp->dir[i++]; + } + c = ff_convert(c, 1); /* OEM -> Unicode */ + if (!c) c = '?'; +#endif + fno->altname[j] = c; + if (!lfv) { + if (IsUpper(c) && (dp->dir[DIR_NTres] & ((i >= 9) ? NS_EXT : NS_BODY))) { + c += 0x20; /* To lower */ + } + fno->fname[j] = c; + } + j++; + } + if (!lfv) { + fno->fname[j] = 0; + if (!dp->dir[DIR_NTres]) j = 0; /* Altname is no longer needed if neither LFN nor case info is exist. */ + } + fno->altname[j] = 0; /* Terminate the SFN */ + +#else /* Non-LFN configuration */ + i = j = 0; + while (i < 11) { /* Copy name body and extension */ + c = (TCHAR)dp->dir[i++]; + if (c == ' ') continue; /* Skip padding spaces */ + if (c == RDDEM) c = (TCHAR)DDEM; /* Restore replaced DDEM character */ + if (i == 9) fno->fname[j++] = '.'; /* Insert a . if extension is exist */ + fno->fname[j++] = c; + } + fno->fname[j] = 0; +#endif + + fno->fattrib = dp->dir[DIR_Attr]; /* Attribute */ + fno->fsize = ld_dword(dp->dir + DIR_FileSize); /* Size */ + tm = ld_dword(dp->dir + DIR_ModTime); /* Timestamp */ + fno->ftime = (WORD)tm; fno->fdate = (WORD)(tm >> 16); +} + +#endif /* _FS_MINIMIZE <= 1 || _FS_RPATH >= 2 */ + + + +#if _USE_FIND && _FS_MINIMIZE <= 1 +/*-----------------------------------------------------------------------*/ +/* Pattern matching */ +/*-----------------------------------------------------------------------*/ + +static +WCHAR get_achar ( /* Get a character and advances ptr 1 or 2 */ + const TCHAR** ptr /* Pointer to pointer to the SBCS/DBCS/Unicode string */ +) +{ +#if !_LFN_UNICODE + WCHAR chr; + + chr = (BYTE)*(*ptr)++; /* Get a byte */ + if (IsLower(chr)) chr -= 0x20; /* To upper ASCII char */ +#ifdef _EXCVT + if (chr >= 0x80) chr = ExCvt[chr - 0x80]; /* To upper SBCS extended char */ +#else + if (IsDBCS1(chr) && IsDBCS2(**ptr)) { /* Get DBC 2nd byte if needed */ + chr = chr << 8 | (BYTE)*(*ptr)++; + } +#endif + return chr; +#else + return ff_wtoupper(*(*ptr)++); /* Get a word and to upper */ +#endif +} + + +static +int pattern_matching ( /* 0:not matched, 1:matched */ + const TCHAR* pat, /* Matching pattern */ + const TCHAR* nam, /* String to be tested */ + int skip, /* Number of pre-skip chars (number of ?s) */ + int inf /* Infinite search (* specified) */ +) +{ + const TCHAR *pp, *np; + WCHAR pc, nc; + int nm, nx; + + + while (skip--) { /* Pre-skip name chars */ + if (!get_achar(&nam)) return 0; /* Branch mismatched if less name chars */ + } + if (!*pat && inf) return 1; /* (short circuit) */ + + do { + pp = pat; np = nam; /* Top of pattern and name to match */ + for (;;) { + if (*pp == '?' || *pp == '*') { /* Wildcard? */ + nm = nx = 0; + do { /* Analyze the wildcard chars */ + if (*pp++ == '?') nm++; else nx = 1; + } while (*pp == '?' || *pp == '*'); + if (pattern_matching(pp, np, nm, nx)) return 1; /* Test new branch (recurs upto number of wildcard blocks in the pattern) */ + nc = *np; break; /* Branch mismatched */ + } + pc = get_achar(&pp); /* Get a pattern char */ + nc = get_achar(&np); /* Get a name char */ + if (pc != nc) break; /* Branch mismatched? */ + if (pc == 0) return 1; /* Branch matched? (matched at end of both strings) */ + } + get_achar(&nam); /* nam++ */ + } while (inf && nc); /* Retry until end of name if infinite search is specified */ + + return 0; +} + +#endif /* _USE_FIND && _FS_MINIMIZE <= 1 */ + + + +/*-----------------------------------------------------------------------*/ +/* Pick a top segment and create the object name in directory form */ +/*-----------------------------------------------------------------------*/ + +static +FRESULT create_name ( /* FR_OK: successful, FR_INVALID_NAME: could not create */ + DIR* dp, /* Pointer to the directory object */ + const TCHAR** path /* Pointer to pointer to the segment in the path string */ +) +{ +#if _USE_LFN != 0 /* LFN configuration */ + BYTE b, cf; + WCHAR w, *lfn; + UINT i, ni, si, di; + const TCHAR *p; + + /* Create LFN in Unicode */ + p = *path; lfn = dp->obj.fs->lfnbuf; si = di = 0; + for (;;) { + w = p[si++]; /* Get a character */ + if (w < ' ') break; /* Break if end of the path name */ + if (w == '/' || w == '\\') { /* Break if a separator is found */ + while (p[si] == '/' || p[si] == '\\') si++; /* Skip duplicated separator if exist */ + break; + } + if (di >= _MAX_LFN) return FR_INVALID_NAME; /* Reject too long name */ +#if !_LFN_UNICODE + w &= 0xFF; + if (IsDBCS1(w)) { /* Check if it is a DBC 1st byte (always false on SBCS cfg) */ + b = (BYTE)p[si++]; /* Get 2nd byte */ + w = (w << 8) + b; /* Create a DBC */ + if (!IsDBCS2(b)) return FR_INVALID_NAME; /* Reject invalid sequence */ + } + w = ff_convert(w, 1); /* Convert ANSI/OEM to Unicode */ + if (!w) return FR_INVALID_NAME; /* Reject invalid code */ +#endif + if (w < 0x80 && chk_chr("\"*:<>\?|\x7F", w)) return FR_INVALID_NAME; /* Reject illegal characters for LFN */ + lfn[di++] = w; /* Store the Unicode character */ + } + *path = &p[si]; /* Return pointer to the next segment */ + cf = (w < ' ') ? NS_LAST : 0; /* Set last segment flag if end of the path */ +#if _FS_RPATH != 0 + if ((di == 1 && lfn[di - 1] == '.') || + (di == 2 && lfn[di - 1] == '.' && lfn[di - 2] == '.')) { /* Is this segment a dot name? */ + lfn[di] = 0; + for (i = 0; i < 11; i++) /* Create dot name for SFN entry */ + dp->fn[i] = (i < di) ? '.' : ' '; + dp->fn[i] = cf | NS_DOT; /* This is a dot entry */ + return FR_OK; + } +#endif + while (di) { /* Snip off trailing spaces and dots if exist */ + w = lfn[di - 1]; + if (w != ' ' && w != '.') break; + di--; + } + lfn[di] = 0; /* LFN is created */ + if (di == 0) return FR_INVALID_NAME; /* Reject nul name */ + + /* Create SFN in directory form */ + mem_set(dp->fn, ' ', 11); + for (si = 0; lfn[si] == ' ' || lfn[si] == '.'; si++) ; /* Strip leading spaces and dots */ + if (si) cf |= NS_LOSS | NS_LFN; + while (di && lfn[di - 1] != '.') di--; /* Find extension (di<=si: no extension) */ + + i = b = 0; ni = 8; + for (;;) { + w = lfn[si++]; /* Get an LFN character */ + if (!w) break; /* Break on end of the LFN */ + if (w == ' ' || (w == '.' && si != di)) { /* Remove spaces and dots */ + cf |= NS_LOSS | NS_LFN; continue; + } + + if (i >= ni || si == di) { /* Extension or end of SFN */ + if (ni == 11) { /* Long extension */ + cf |= NS_LOSS | NS_LFN; break; + } + if (si != di) cf |= NS_LOSS | NS_LFN; /* Out of 8.3 format */ + if (si > di) break; /* No extension */ + si = di; i = 8; ni = 11; /* Enter extension section */ + b <<= 2; continue; + } + + if (w >= 0x80) { /* Non ASCII character */ +#ifdef _EXCVT + w = ff_convert(w, 0); /* Unicode -> OEM code */ + if (w) w = ExCvt[w - 0x80]; /* Convert extended character to upper (SBCS) */ +#else + w = ff_convert(ff_wtoupper(w), 0); /* Upper converted Unicode -> OEM code */ +#endif + cf |= NS_LFN; /* Force create LFN entry */ + } + + if (_DF1S && w >= 0x100) { /* Is this DBC? (always false at SBCS cfg) */ + if (i >= ni - 1) { + cf |= NS_LOSS | NS_LFN; i = ni; continue; + } + dp->fn[i++] = (BYTE)(w >> 8); + } else { /* SBC */ + if (!w || chk_chr("+,;=[]", w)) { /* Replace illegal characters for SFN */ + w = '_'; cf |= NS_LOSS | NS_LFN;/* Lossy conversion */ + } else { + if (IsUpper(w)) { /* ASCII large capital */ + b |= 2; + } else { + if (IsLower(w)) { /* ASCII small capital */ + b |= 1; w -= 0x20; + } + } + } + } + dp->fn[i++] = (BYTE)w; + } + + if (dp->fn[0] == DDEM) dp->fn[0] = RDDEM; /* If the first character collides with DDEM, replace it with RDDEM */ + + if (ni == 8) b <<= 2; + if ((b & 0x0C) == 0x0C || (b & 0x03) == 0x03) cf |= NS_LFN; /* Create LFN entry when there are composite capitals */ + if (!(cf & NS_LFN)) { /* When LFN is in 8.3 format without extended character, NT flags are created */ + if ((b & 0x03) == 0x01) cf |= NS_EXT; /* NT flag (Extension has only small capital) */ + if ((b & 0x0C) == 0x04) cf |= NS_BODY; /* NT flag (Filename has only small capital) */ + } + + dp->fn[NSFLAG] = cf; /* SFN is created */ + + return FR_OK; + + +#else /* _USE_LFN != 0 : Non-LFN configuration */ + BYTE c, d, *sfn; + UINT ni, si, i; + const char *p; + + /* Create file name in directory form */ + p = *path; sfn = dp->fn; + mem_set(sfn, ' ', 11); + si = i = 0; ni = 8; +#if _FS_RPATH != 0 + if (p[si] == '.') { /* Is this a dot entry? */ + for (;;) { + c = (BYTE)p[si++]; + if (c != '.' || si >= 3) break; + sfn[i++] = c; + } + if (c != '/' && c != '\\' && c > ' ') return FR_INVALID_NAME; + *path = p + si; /* Return pointer to the next segment */ + sfn[NSFLAG] = (c <= ' ') ? NS_LAST | NS_DOT : NS_DOT; /* Set last segment flag if end of the path */ + return FR_OK; + } +#endif + for (;;) { + c = (BYTE)p[si++]; + if (c <= ' ') break; /* Break if end of the path name */ + if (c == '/' || c == '\\') { /* Break if a separator is found */ + while (p[si] == '/' || p[si] == '\\') si++; /* Skip duplicated separator if exist */ + break; + } + if (c == '.' || i >= ni) { /* End of body or over size? */ + if (ni == 11 || c != '.') return FR_INVALID_NAME; /* Over size or invalid dot */ + i = 8; ni = 11; /* Goto extension */ + continue; + } + if (c >= 0x80) { /* Extended character? */ +#ifdef _EXCVT + c = ExCvt[c - 0x80]; /* To upper extended characters (SBCS cfg) */ +#else +#if !_DF1S + return FR_INVALID_NAME; /* Reject extended characters (ASCII only cfg) */ +#endif +#endif + } + if (IsDBCS1(c)) { /* Check if it is a DBC 1st byte (always false at SBCS cfg.) */ + d = (BYTE)p[si++]; /* Get 2nd byte */ + if (!IsDBCS2(d) || i >= ni - 1) return FR_INVALID_NAME; /* Reject invalid DBC */ + sfn[i++] = c; + sfn[i++] = d; + } else { /* SBC */ + if (chk_chr("\"*+,:;<=>\?[]|\x7F", c)) return FR_INVALID_NAME; /* Reject illegal chrs for SFN */ + if (IsLower(c)) c -= 0x20; /* To upper */ + sfn[i++] = c; + } + } + *path = p + si; /* Return pointer to the next segment */ + if (i == 0) return FR_INVALID_NAME; /* Reject nul string */ + + if (sfn[0] == DDEM) sfn[0] = RDDEM; /* If the first character collides with DDEM, replace it with RDDEM */ + sfn[NSFLAG] = (c <= ' ') ? NS_LAST : 0; /* Set last segment flag if end of the path */ + + return FR_OK; +#endif /* _USE_LFN != 0 */ +} + + + + +/*-----------------------------------------------------------------------*/ +/* Follow a file path */ +/*-----------------------------------------------------------------------*/ + +static +FRESULT follow_path ( /* FR_OK(0): successful, !=0: error code */ + DIR* dp, /* Directory object to return last directory and found object */ + const TCHAR* path /* Full-path string to find a file or directory */ +) +{ + FRESULT res; + BYTE ns; + _FDID *obj = &dp->obj; + FATFS *fs = obj->fs; + + +#if _FS_RPATH != 0 + if (*path != '/' && *path != '\\') { /* Without heading separator */ + obj->sclust = fs->cdir; /* Start from current directory */ + } else +#endif + { /* With heading separator */ + while (*path == '/' || *path == '\\') path++; /* Strip heading separator */ + obj->sclust = 0; /* Start from root directory */ + } +#if _FS_EXFAT + obj->n_frag = 0; /* Invalidate last fragment counter of the object */ +#if _FS_RPATH != 0 + if (fs->fs_type == FS_EXFAT && obj->sclust) { /* Retrieve the sub-directory status if needed */ + DIR dj; + + obj->c_scl = fs->cdc_scl; + obj->c_size = fs->cdc_size; + obj->c_ofs = fs->cdc_ofs; + res = load_obj_dir(&dj, obj); + if (res != FR_OK) return res; + obj->objsize = ld_dword(fs->dirbuf + XDIR_FileSize); + obj->stat = fs->dirbuf[XDIR_GenFlags] & 2; + } +#endif +#endif + + if ((UINT)*path < ' ') { /* Null path name is the origin directory itself */ + dp->fn[NSFLAG] = NS_NONAME; + res = dir_sdi(dp, 0); + + } else { /* Follow path */ + for (;;) { + res = create_name(dp, &path); /* Get a segment name of the path */ + if (res != FR_OK) break; + res = dir_find(dp); /* Find an object with the segment name */ + ns = dp->fn[NSFLAG]; + if (res != FR_OK) { /* Failed to find the object */ + if (res == FR_NO_FILE) { /* Object is not found */ + if (_FS_RPATH && (ns & NS_DOT)) { /* If dot entry is not exist, stay there */ + if (!(ns & NS_LAST)) continue; /* Continue to follow if not last segment */ + dp->fn[NSFLAG] = NS_NONAME; + res = FR_OK; + } else { /* Could not find the object */ + if (!(ns & NS_LAST)) res = FR_NO_PATH; /* Adjust error code if not last segment */ + } + } + break; + } + if (ns & NS_LAST) break; /* Last segment matched. Function completed. */ + /* Get into the sub-directory */ + if (!(obj->attr & AM_DIR)) { /* It is not a sub-directory and cannot follow */ + res = FR_NO_PATH; break; + } +#if _FS_EXFAT + if (fs->fs_type == FS_EXFAT) { /* Save containing directory information for next dir */ + obj->c_scl = obj->sclust; + obj->c_size = ((DWORD)obj->objsize & 0xFFFFFF00) | obj->stat; + obj->c_ofs = dp->blk_ofs; + obj->sclust = ld_dword(fs->dirbuf + XDIR_FstClus); /* Open next directory */ + obj->stat = fs->dirbuf[XDIR_GenFlags] & 2; + obj->objsize = ld_qword(fs->dirbuf + XDIR_FileSize); + } else +#endif + { + obj->sclust = ld_clust(fs, fs->win + dp->dptr % SS(fs)); /* Open next directory */ + } + } + } + + return res; +} + + + + +/*-----------------------------------------------------------------------*/ +/* Get logical drive number from path name */ +/*-----------------------------------------------------------------------*/ + +static +int get_ldnumber ( /* Returns logical drive number (-1:invalid drive) */ + const TCHAR** path /* Pointer to pointer to the path name */ +) +{ + const TCHAR *tp, *tt; + UINT i; + int vol = -1; +#if _STR_VOLUME_ID /* Find string drive id */ + static const char* const volid[] = {_VOLUME_STRS}; + const char *sp; + char c; + TCHAR tc; +#endif + + + if (*path) { /* If the pointer is not a null */ + for (tt = *path; (UINT)*tt >= (_USE_LFN ? ' ' : '!') && *tt != ':'; tt++) ; /* Find ':' in the path */ + if (*tt == ':') { /* If a ':' is exist in the path name */ + tp = *path; + i = *tp++ - '0'; + if (i < 10 && tp == tt) { /* Is there a numeric drive id? */ + if (i < _VOLUMES) { /* If a drive id is found, get the value and strip it */ + vol = (int)i; + *path = ++tt; + } + } +#if _STR_VOLUME_ID + else { /* No numeric drive number, find string drive id */ + i = 0; tt++; + do { + sp = volid[i]; tp = *path; + do { /* Compare a string drive id with path name */ + c = *sp++; tc = *tp++; + if (IsLower(tc)) tc -= 0x20; + } while (c && (TCHAR)c == tc); + } while ((c || tp != tt) && ++i < _VOLUMES); /* Repeat for each id until pattern match */ + if (i < _VOLUMES) { /* If a drive id is found, get the value and strip it */ + vol = (int)i; + *path = tt; + } + } +#endif + return vol; + } +#if _FS_RPATH != 0 && _VOLUMES >= 2 + vol = CurrVol; /* Current drive */ +#else + vol = 0; /* Drive 0 */ +#endif + } + return vol; +} + + + + +/*-----------------------------------------------------------------------*/ +/* Load a sector and check if it is an FAT boot sector */ +/*-----------------------------------------------------------------------*/ + +static +BYTE check_fs ( /* 0:FAT, 1:exFAT, 2:Valid BS but not FAT, 3:Not a BS, 4:Disk error */ + FATFS* fs, /* File system object */ + DWORD sect /* Sector# (lba) to load and check if it is an FAT-VBR or not */ +) +{ + fs->wflag = 0; fs->winsect = 0xFFFFFFFF; /* Invaidate window */ + if (move_window(fs, sect) != FR_OK) return 4; /* Load boot record */ + + if (ld_word(fs->win + BS_55AA) != 0xAA55) return 3; /* Check boot record signature (always placed here even if the sector size is >512) */ + + if (fs->win[BS_JmpBoot] == 0xE9 || (fs->win[BS_JmpBoot] == 0xEB && fs->win[BS_JmpBoot + 2] == 0x90)) { + if ((ld_dword(fs->win + BS_FilSysType) & 0xFFFFFF) == 0x544146) return 0; /* Check "FAT" string */ + if (ld_dword(fs->win + BS_FilSysType32) == 0x33544146) return 0; /* Check "FAT3" string */ + } +#if _FS_EXFAT + if (!mem_cmp(fs->win + BS_JmpBoot, "\xEB\x76\x90" "EXFAT ", 11)) return 1; +#endif + return 2; +} + + + + +/*-----------------------------------------------------------------------*/ +/* Find logical drive and check if the volume is mounted */ +/*-----------------------------------------------------------------------*/ + +static +FRESULT find_volume ( /* FR_OK(0): successful, !=0: any error occurred */ + const TCHAR** path, /* Pointer to pointer to the path name (drive number) */ + FATFS** rfs, /* Pointer to pointer to the found file system object */ + BYTE mode /* !=0: Check write protection for write access */ +) +{ + BYTE fmt, *pt; + int vol; + DSTATUS stat; + DWORD bsect, fasize, tsect, sysect, nclst, szbfat, br[4]; + WORD nrsv; + FATFS *fs; + UINT i; + + + /* Get logical drive number */ + *rfs = 0; + vol = get_ldnumber(path); + if (vol < 0) return FR_INVALID_DRIVE; + + /* Check if the file system object is valid or not */ + fs = FatFs[vol]; /* Get pointer to the file system object */ + if (!fs) return FR_NOT_ENABLED; /* Is the file system object available? */ + + ENTER_FF(fs); /* Lock the volume */ + *rfs = fs; /* Return pointer to the file system object */ + + mode &= (BYTE)~FA_READ; /* Desired access mode, write access or not */ + if (fs->fs_type) { /* If the volume has been mounted */ + stat = disk_status(fs->drv); + if (!(stat & STA_NOINIT)) { /* and the physical drive is kept initialized */ + if (!_FS_READONLY && mode && (stat & STA_PROTECT)) { /* Check write protection if needed */ + return FR_WRITE_PROTECTED; + } + return FR_OK; /* The file system object is valid */ + } + } + + /* The file system object is not valid. */ + /* Following code attempts to mount the volume. (analyze BPB and initialize the fs object) */ + + fs->fs_type = 0; /* Clear the file system object */ + fs->drv = LD2PD(vol); /* Bind the logical drive and a physical drive */ + stat = disk_initialize(fs->drv); /* Initialize the physical drive */ + if (stat & STA_NOINIT) { /* Check if the initialization succeeded */ + return FR_NOT_READY; /* Failed to initialize due to no medium or hard error */ + } + if (!_FS_READONLY && mode && (stat & STA_PROTECT)) { /* Check disk write protection if needed */ + return FR_WRITE_PROTECTED; + } +#if _MAX_SS != _MIN_SS /* Get sector size (multiple sector size cfg only) */ + if (disk_ioctl(fs->drv, GET_SECTOR_SIZE, &SS(fs)) != RES_OK) return FR_DISK_ERR; + if (SS(fs) > _MAX_SS || SS(fs) < _MIN_SS || (SS(fs) & (SS(fs) - 1))) return FR_DISK_ERR; +#endif + + /* Find an FAT partition on the drive. Supports only generic partitioning rules, FDISK and SFD. */ + bsect = 0; + fmt = check_fs(fs, bsect); /* Load sector 0 and check if it is an FAT-VBR as SFD */ + if (fmt == 2 || (fmt < 2 && LD2PT(vol) != 0)) { /* Not an FAT-VBR or forced partition number */ + for (i = 0; i < 4; i++) { /* Get partition offset */ + pt = fs->win + (MBR_Table + i * SZ_PTE); + br[i] = pt[PTE_System] ? ld_dword(pt + PTE_StLba) : 0; + } + i = LD2PT(vol); /* Partition number: 0:auto, 1-4:forced */ + if (i) i--; + do { /* Find an FAT volume */ + bsect = br[i]; + fmt = bsect ? check_fs(fs, bsect) : 3; /* Check the partition */ + } while (LD2PT(vol) == 0 && fmt >= 2 && ++i < 4); + } + if (fmt == 4) return FR_DISK_ERR; /* An error occured in the disk I/O layer */ + if (fmt >= 2) return FR_NO_FILESYSTEM; /* No FAT volume is found */ + + /* An FAT volume is found (bsect). Following code initializes the file system object */ + +#if _FS_EXFAT + if (fmt == 1) { + QWORD maxlba; + + for (i = BPB_ZeroedEx; i < BPB_ZeroedEx + 53 && fs->win[i] == 0; i++) ; /* Check zero filler */ + if (i < BPB_ZeroedEx + 53) return FR_NO_FILESYSTEM; + + if (ld_word(fs->win + BPB_FSVerEx) != 0x100) return FR_NO_FILESYSTEM; /* Check exFAT revision (Must be 1.0) */ + + if (1 << fs->win[BPB_BytsPerSecEx] != SS(fs)) { /* (BPB_BytsPerSecEx must be equal to the physical sector size) */ + return FR_NO_FILESYSTEM; + } + + maxlba = ld_qword(fs->win + BPB_TotSecEx) + bsect; /* Last LBA + 1 of the volume */ + if (maxlba >= 0x100000000) return FR_NO_FILESYSTEM; /* (It cannot be handled in 32-bit LBA) */ + + fs->fsize = ld_dword(fs->win + BPB_FatSzEx); /* Number of sectors per FAT */ + + fs->n_fats = fs->win[BPB_NumFATsEx]; /* Number of FATs */ + if (fs->n_fats != 1) return FR_NO_FILESYSTEM; /* (Supports only 1 FAT) */ + + fs->csize = 1 << fs->win[BPB_SecPerClusEx]; /* Cluster size */ + if (fs->csize == 0) return FR_NO_FILESYSTEM; /* (Must be 1..32768) */ + + nclst = ld_dword(fs->win + BPB_NumClusEx); /* Number of clusters */ + if (nclst > MAX_EXFAT) return FR_NO_FILESYSTEM; /* (Too many clusters) */ + fs->n_fatent = nclst + 2; + + /* Boundaries and Limits */ + fs->volbase = bsect; + fs->database = bsect + ld_dword(fs->win + BPB_DataOfsEx); + fs->fatbase = bsect + ld_dword(fs->win + BPB_FatOfsEx); + if (maxlba < (QWORD)fs->database + nclst * fs->csize) return FR_NO_FILESYSTEM; /* (Volume size must not be smaller than the size requiered) */ + fs->dirbase = ld_dword(fs->win + BPB_RootClusEx); + + /* Check if bitmap location is in assumption (at the first cluster) */ + if (move_window(fs, clust2sect(fs, fs->dirbase)) != FR_OK) return FR_DISK_ERR; + for (i = 0; i < SS(fs); i += SZDIRE) { + if (fs->win[i] == 0x81 && ld_dword(fs->win + i + 20) == 2) break; /* 81 entry with cluster #2? */ + } + if (i == SS(fs)) return FR_NO_FILESYSTEM; +#if !_FS_READONLY + fs->last_clst = fs->free_clst = 0xFFFFFFFF; /* Initialize cluster allocation information */ +#endif + fmt = FS_EXFAT; /* FAT sub-type */ + } else +#endif /* _FS_EXFAT */ + { + if (ld_word(fs->win + BPB_BytsPerSec) != SS(fs)) return FR_NO_FILESYSTEM; /* (BPB_BytsPerSec must be equal to the physical sector size) */ + + fasize = ld_word(fs->win + BPB_FATSz16); /* Number of sectors per FAT */ + if (fasize == 0) fasize = ld_dword(fs->win + BPB_FATSz32); + fs->fsize = fasize; + + fs->n_fats = fs->win[BPB_NumFATs]; /* Number of FATs */ + if (fs->n_fats != 1 && fs->n_fats != 2) return FR_NO_FILESYSTEM; /* (Must be 1 or 2) */ + fasize *= fs->n_fats; /* Number of sectors for FAT area */ + + fs->csize = fs->win[BPB_SecPerClus]; /* Cluster size */ + if (fs->csize == 0 || (fs->csize & (fs->csize - 1))) return FR_NO_FILESYSTEM; /* (Must be power of 2) */ + + fs->n_rootdir = ld_word(fs->win + BPB_RootEntCnt); /* Number of root directory entries */ + if (fs->n_rootdir % (SS(fs) / SZDIRE)) return FR_NO_FILESYSTEM; /* (Must be sector aligned) */ + + tsect = ld_word(fs->win + BPB_TotSec16); /* Number of sectors on the volume */ + if (tsect == 0) tsect = ld_dword(fs->win + BPB_TotSec32); + + nrsv = ld_word(fs->win + BPB_RsvdSecCnt); /* Number of reserved sectors */ + if (nrsv == 0) return FR_NO_FILESYSTEM; /* (Must not be 0) */ + + /* Determine the FAT sub type */ + sysect = nrsv + fasize + fs->n_rootdir / (SS(fs) / SZDIRE); /* RSV + FAT + DIR */ + if (tsect < sysect) return FR_NO_FILESYSTEM; /* (Invalid volume size) */ + nclst = (tsect - sysect) / fs->csize; /* Number of clusters */ + if (nclst == 0) return FR_NO_FILESYSTEM; /* (Invalid volume size) */ + fmt = FS_FAT32; + if (nclst <= MAX_FAT16) fmt = FS_FAT16; + if (nclst <= MAX_FAT12) fmt = FS_FAT12; + + /* Boundaries and Limits */ + fs->n_fatent = nclst + 2; /* Number of FAT entries */ + fs->volbase = bsect; /* Volume start sector */ + fs->fatbase = bsect + nrsv; /* FAT start sector */ + fs->database = bsect + sysect; /* Data start sector */ + if (fmt == FS_FAT32) { + if (ld_word(fs->win + BPB_FSVer32) != 0) return FR_NO_FILESYSTEM; /* (Must be FAT32 revision 0.0) */ + if (fs->n_rootdir) return FR_NO_FILESYSTEM; /* (BPB_RootEntCnt must be 0) */ + fs->dirbase = ld_dword(fs->win + BPB_RootClus32); /* Root directory start cluster */ + szbfat = fs->n_fatent * 4; /* (Needed FAT size) */ + } else { + if (fs->n_rootdir == 0) return FR_NO_FILESYSTEM;/* (BPB_RootEntCnt must not be 0) */ + fs->dirbase = fs->fatbase + fasize; /* Root directory start sector */ + szbfat = (fmt == FS_FAT16) ? /* (Needed FAT size) */ + fs->n_fatent * 2 : fs->n_fatent * 3 / 2 + (fs->n_fatent & 1); + } + if (fs->fsize < (szbfat + (SS(fs) - 1)) / SS(fs)) return FR_NO_FILESYSTEM; /* (BPB_FATSz must not be less than the size needed) */ + +#if !_FS_READONLY + /* Get FSINFO if available */ + fs->last_clst = fs->free_clst = 0xFFFFFFFF; /* Initialize cluster allocation information */ + fs->fsi_flag = 0x80; +#if (_FS_NOFSINFO & 3) != 3 + if (fmt == FS_FAT32 /* Enable FSINFO only if FAT32 and BPB_FSInfo32 == 1 */ + && ld_word(fs->win + BPB_FSInfo32) == 1 + && move_window(fs, bsect + 1) == FR_OK) + { + fs->fsi_flag = 0; + if (ld_word(fs->win + BS_55AA) == 0xAA55 /* Load FSINFO data if available */ + && ld_dword(fs->win + FSI_LeadSig) == 0x41615252 + && ld_dword(fs->win + FSI_StrucSig) == 0x61417272) + { +#if (_FS_NOFSINFO & 1) == 0 + fs->free_clst = ld_dword(fs->win + FSI_Free_Count); +#endif +#if (_FS_NOFSINFO & 2) == 0 + fs->last_clst = ld_dword(fs->win + FSI_Nxt_Free); +#endif + } + } +#endif /* (_FS_NOFSINFO & 3) != 3 */ +#endif /* !_FS_READONLY */ + } + + fs->fs_type = fmt; /* FAT sub-type */ + fs->id = ++Fsid; /* File system mount ID */ +#if _USE_LFN == 1 + fs->lfnbuf = LfnBuf; /* Static LFN working buffer */ +#if _FS_EXFAT + fs->dirbuf = DirBuf; /* Static directory block scratchpad buuffer */ +#endif +#endif +#if _FS_RPATH != 0 + fs->cdir = 0; /* Initialize current directory */ +#endif +#if _FS_LOCK != 0 /* Clear file lock semaphores */ + clear_lock(fs); +#endif + return FR_OK; +} + + + + +/*-----------------------------------------------------------------------*/ +/* Check if the file/directory object is valid or not */ +/*-----------------------------------------------------------------------*/ + +static +FRESULT validate ( /* Returns FR_OK or FR_INVALID_OBJECT */ + _FDID* obj, /* Pointer to the _OBJ, the 1st member in the FIL/DIR object, to check validity */ + FATFS** fs /* Pointer to pointer to the owner file system object to return */ +) +{ + FRESULT res = FR_INVALID_OBJECT; + + + if (obj && obj->fs && obj->fs->fs_type && obj->id == obj->fs->id) { /* Test if the object is valid */ +#if _FS_REENTRANT + if (lock_fs(obj->fs)) { /* Obtain the filesystem object */ + if (!(disk_status(obj->fs->drv) & STA_NOINIT)) { /* Test if the phsical drive is kept initialized */ + res = FR_OK; + } else { + unlock_fs(obj->fs, FR_OK); + } + } else { + res = FR_TIMEOUT; + } +#else + if (!(disk_status(obj->fs->drv) & STA_NOINIT)) { /* Test if the phsical drive is kept initialized */ + res = FR_OK; + } +#endif + } + *fs = (res == FR_OK) ? obj->fs : 0; /* Corresponding filesystem object */ + return res; +} + + + + +/*--------------------------------------------------------------------------- + + Public Functions (FatFs API) + +----------------------------------------------------------------------------*/ + + + +/*-----------------------------------------------------------------------*/ +/* Mount/Unmount a Logical Drive */ +/*-----------------------------------------------------------------------*/ + +FRESULT f_mount ( + FATFS* fs, /* Pointer to the file system object (NULL:unmount)*/ + const TCHAR* path, /* Logical drive number to be mounted/unmounted */ + BYTE opt /* Mode option 0:Do not mount (delayed mount), 1:Mount immediately */ +) +{ + FATFS *cfs; + int vol; + FRESULT res; + const TCHAR *rp = path; + + + /* Get logical drive number */ + vol = get_ldnumber(&rp); + if (vol < 0) return FR_INVALID_DRIVE; + cfs = FatFs[vol]; /* Pointer to fs object */ + + if (cfs) { +#if _FS_LOCK != 0 + clear_lock(cfs); +#endif +#if _FS_REENTRANT /* Discard sync object of the current volume */ + if (!ff_del_syncobj(cfs->sobj)) return FR_INT_ERR; +#endif + cfs->fs_type = 0; /* Clear old fs object */ + } + + if (fs) { + fs->fs_type = 0; /* Clear new fs object */ +#if _FS_REENTRANT /* Create sync object for the new volume */ + if (!ff_cre_syncobj((BYTE)vol, &fs->sobj)) return FR_INT_ERR; +#endif + } + FatFs[vol] = fs; /* Register new fs object */ + + if (!fs || opt != 1) return FR_OK; /* Do not mount now, it will be mounted later */ + + res = find_volume(&path, &fs, 0); /* Force mounted the volume */ + LEAVE_FF(fs, res); +} + + + + +/*-----------------------------------------------------------------------*/ +/* Open or Create a File */ +/*-----------------------------------------------------------------------*/ + +FRESULT f_open ( + FIL* fp, /* Pointer to the blank file object */ + const TCHAR* path, /* Pointer to the file name */ + BYTE mode /* Access mode and file open mode flags */ +) +{ + FRESULT res; + DIR dj; + FATFS *fs; +#if !_FS_READONLY + DWORD dw, cl, bcs, clst, sc; + FSIZE_t ofs; +#endif + DEF_NAMBUF + + + if (!fp) return FR_INVALID_OBJECT; + + /* Get logical drive */ + mode &= _FS_READONLY ? FA_READ : FA_READ | FA_WRITE | FA_CREATE_ALWAYS | FA_CREATE_NEW | FA_OPEN_ALWAYS | FA_OPEN_APPEND | FA_SEEKEND; + res = find_volume(&path, &fs, mode); + if (res == FR_OK) { + dj.obj.fs = fs; + INIT_NAMBUF(fs); + res = follow_path(&dj, path); /* Follow the file path */ +#if !_FS_READONLY /* R/W configuration */ + if (res == FR_OK) { + if (dj.fn[NSFLAG] & NS_NONAME) { /* Origin directory itself? */ + res = FR_INVALID_NAME; + } +#if _FS_LOCK != 0 + else { + res = chk_lock(&dj, (mode & ~FA_READ) ? 1 : 0); + } +#endif + } + /* Create or Open a file */ + if (mode & (FA_CREATE_ALWAYS | FA_OPEN_ALWAYS | FA_CREATE_NEW)) { + if (res != FR_OK) { /* No file, create new */ + if (res == FR_NO_FILE) { /* There is no file to open, create a new entry */ +#if _FS_LOCK != 0 + res = enq_lock() ? dir_register(&dj) : FR_TOO_MANY_OPEN_FILES; +#else + res = dir_register(&dj); +#endif + } + mode |= FA_CREATE_ALWAYS; /* File is created */ + } + else { /* Any object is already existing */ + if (dj.obj.attr & (AM_RDO | AM_DIR)) { /* Cannot overwrite it (R/O or DIR) */ + res = FR_DENIED; + } else { + if (mode & FA_CREATE_NEW) res = FR_EXIST; /* Cannot create as new file */ + } + } + if (res == FR_OK && (mode & FA_CREATE_ALWAYS)) { /* Truncate it if overwrite mode */ + dw = GET_FATTIME(); +#if _FS_EXFAT + if (fs->fs_type == FS_EXFAT) { + /* Get current allocation info */ + fp->obj.fs = fs; + fp->obj.sclust = ld_dword(fs->dirbuf + XDIR_FstClus); + fp->obj.objsize = ld_qword(fs->dirbuf + XDIR_FileSize); + fp->obj.stat = fs->dirbuf[XDIR_GenFlags] & 2; + fp->obj.n_frag = 0; + /* Initialize directory entry block */ + st_dword(fs->dirbuf + XDIR_CrtTime, dw); /* Set created time */ + fs->dirbuf[XDIR_CrtTime10] = 0; + st_dword(fs->dirbuf + XDIR_ModTime, dw); /* Set modified time */ + fs->dirbuf[XDIR_ModTime10] = 0; + fs->dirbuf[XDIR_Attr] = AM_ARC; /* Reset attribute */ + st_dword(fs->dirbuf + XDIR_FstClus, 0); /* Reset file allocation info */ + st_qword(fs->dirbuf + XDIR_FileSize, 0); + st_qword(fs->dirbuf + XDIR_ValidFileSize, 0); + fs->dirbuf[XDIR_GenFlags] = 1; + res = store_xdir(&dj); + if (res == FR_OK && fp->obj.sclust) { /* Remove the cluster chain if exist */ + res = remove_chain(&fp->obj, fp->obj.sclust, 0); + fs->last_clst = fp->obj.sclust - 1; /* Reuse the cluster hole */ + } + } else +#endif + { + /* Clean directory info */ + st_dword(dj.dir + DIR_CrtTime, dw); /* Set created time */ + st_dword(dj.dir + DIR_ModTime, dw); /* Set modified time */ + dj.dir[DIR_Attr] = AM_ARC; /* Reset attribute */ + cl = ld_clust(fs, dj.dir); /* Get cluster chain */ + st_clust(fs, dj.dir, 0); /* Reset file allocation info */ + st_dword(dj.dir + DIR_FileSize, 0); + fs->wflag = 1; + + if (cl) { /* Remove the cluster chain if exist */ + dw = fs->winsect; + res = remove_chain(&dj.obj, cl, 0); + if (res == FR_OK) { + res = move_window(fs, dw); + fs->last_clst = cl - 1; /* Reuse the cluster hole */ + } + } + } + } + } + else { /* Open an existing file */ + if (res == FR_OK) { /* Following succeeded */ + if (dj.obj.attr & AM_DIR) { /* It is a directory */ + res = FR_NO_FILE; + } else { + if ((mode & FA_WRITE) && (dj.obj.attr & AM_RDO)) { /* R/O violation */ + res = FR_DENIED; + } + } + } + } + if (res == FR_OK) { + if (mode & FA_CREATE_ALWAYS) /* Set file change flag if created or overwritten */ + mode |= FA_MODIFIED; + fp->dir_sect = fs->winsect; /* Pointer to the directory entry */ + fp->dir_ptr = dj.dir; +#if _FS_LOCK != 0 + fp->obj.lockid = inc_lock(&dj, (mode & ~FA_READ) ? 1 : 0); + if (!fp->obj.lockid) res = FR_INT_ERR; +#endif + } +#else /* R/O configuration */ + if (res == FR_OK) { + if (dj.fn[NSFLAG] & NS_NONAME) { /* Origin directory itself? */ + res = FR_INVALID_NAME; + } else { + if (dj.obj.attr & AM_DIR) { /* It is a directory */ + res = FR_NO_FILE; + } + } + } +#endif + + if (res == FR_OK) { +#if _FS_EXFAT + if (fs->fs_type == FS_EXFAT) { + fp->obj.c_scl = dj.obj.sclust; /* Get containing directory info */ + fp->obj.c_size = ((DWORD)dj.obj.objsize & 0xFFFFFF00) | dj.obj.stat; + fp->obj.c_ofs = dj.blk_ofs; + fp->obj.sclust = ld_dword(fs->dirbuf + XDIR_FstClus); /* Get object allocation info */ + fp->obj.objsize = ld_qword(fs->dirbuf + XDIR_FileSize); + fp->obj.stat = fs->dirbuf[XDIR_GenFlags] & 2; + } else +#endif + { + fp->obj.sclust = ld_clust(fs, dj.dir); /* Get object allocation info */ + fp->obj.objsize = ld_dword(dj.dir + DIR_FileSize); + } +#if _USE_FASTSEEK + fp->cltbl = 0; /* Disable fast seek mode */ +#endif + fp->obj.fs = fs; /* Validate the file object */ + fp->obj.id = fs->id; + fp->flag = mode; /* Set file access mode */ + fp->err = 0; /* Clear error flag */ + fp->sect = 0; /* Invalidate current data sector */ + fp->fptr = 0; /* Set file pointer top of the file */ +#if !_FS_READONLY +#if !_FS_TINY + mem_set(fp->buf, 0, _MAX_SS); /* Clear sector buffer */ +#endif + if ((mode & FA_SEEKEND) && fp->obj.objsize > 0) { /* Seek to end of file if FA_OPEN_APPEND is specified */ + fp->fptr = fp->obj.objsize; /* Offset to seek */ + bcs = (DWORD)fs->csize * SS(fs); /* Cluster size in byte */ + clst = fp->obj.sclust; /* Follow the cluster chain */ + for (ofs = fp->obj.objsize; res == FR_OK && ofs > bcs; ofs -= bcs) { + clst = get_fat(&fp->obj, clst); + if (clst <= 1) res = FR_INT_ERR; + if (clst == 0xFFFFFFFF) res = FR_DISK_ERR; + } + fp->clust = clst; + if (res == FR_OK && ofs % SS(fs)) { /* Fill sector buffer if not on the sector boundary */ + if ((sc = clust2sect(fs, clst)) == 0) { + res = FR_INT_ERR; + } else { + fp->sect = sc + (DWORD)(ofs / SS(fs)); +#if !_FS_TINY + if (disk_read(fs->drv, fp->buf, fp->sect, 1) != RES_OK) res = FR_DISK_ERR; +#endif + } + } + } +#endif + } + + FREE_NAMBUF(); + } + + if (res != FR_OK) fp->obj.fs = 0; /* Invalidate file object on error */ + + LEAVE_FF(fs, res); +} + + + + +/*-----------------------------------------------------------------------*/ +/* Read File */ +/*-----------------------------------------------------------------------*/ + +FRESULT f_read ( + FIL* fp, /* Pointer to the file object */ + void* buff, /* Pointer to data buffer */ + UINT btr, /* Number of bytes to read */ + UINT* br /* Pointer to number of bytes read */ +) +{ + FRESULT res; + FATFS *fs; + DWORD clst, sect; + FSIZE_t remain; + UINT rcnt, cc, csect; + BYTE *rbuff = (BYTE*)buff; + + + *br = 0; /* Clear read byte counter */ + res = validate(&fp->obj, &fs); /* Check validity of the file object */ + if (res != FR_OK || (res = (FRESULT)fp->err) != FR_OK) LEAVE_FF(fs, res); /* Check validity */ + if (!(fp->flag & FA_READ)) LEAVE_FF(fs, FR_DENIED); /* Check access mode */ + remain = fp->obj.objsize - fp->fptr; + if (btr > remain) btr = (UINT)remain; /* Truncate btr by remaining bytes */ + + for ( ; btr; /* Repeat until all data read */ + rbuff += rcnt, fp->fptr += rcnt, *br += rcnt, btr -= rcnt) { + if (fp->fptr % SS(fs) == 0) { /* On the sector boundary? */ + csect = (UINT)(fp->fptr / SS(fs) & (fs->csize - 1)); /* Sector offset in the cluster */ + if (csect == 0) { /* On the cluster boundary? */ + if (fp->fptr == 0) { /* On the top of the file? */ + clst = fp->obj.sclust; /* Follow cluster chain from the origin */ + } else { /* Middle or end of the file */ +#if _USE_FASTSEEK + if (fp->cltbl) { + clst = clmt_clust(fp, fp->fptr); /* Get cluster# from the CLMT */ + } else +#endif + { + clst = get_fat(&fp->obj, fp->clust); /* Follow cluster chain on the FAT */ + } + } + if (clst < 2) ABORT(fs, FR_INT_ERR); + if (clst == 0xFFFFFFFF) ABORT(fs, FR_DISK_ERR); + fp->clust = clst; /* Update current cluster */ + } + sect = clust2sect(fs, fp->clust); /* Get current sector */ + if (!sect) ABORT(fs, FR_INT_ERR); + sect += csect; + cc = btr / SS(fs); /* When remaining bytes >= sector size, */ + if (cc) { /* Read maximum contiguous sectors directly */ + if (csect + cc > fs->csize) { /* Clip at cluster boundary */ + cc = fs->csize - csect; + } + if (disk_read(fs->drv, rbuff, sect, cc) != RES_OK) ABORT(fs, FR_DISK_ERR); +#if !_FS_READONLY && _FS_MINIMIZE <= 2 /* Replace one of the read sectors with cached data if it contains a dirty sector */ +#if _FS_TINY + if (fs->wflag && fs->winsect - sect < cc) { + mem_cpy(rbuff + ((fs->winsect - sect) * SS(fs)), fs->win, SS(fs)); + } +#else + if ((fp->flag & FA_DIRTY) && fp->sect - sect < cc) { + mem_cpy(rbuff + ((fp->sect - sect) * SS(fs)), fp->buf, SS(fs)); + } +#endif +#endif + rcnt = SS(fs) * cc; /* Number of bytes transferred */ + continue; + } +#if !_FS_TINY + if (fp->sect != sect) { /* Load data sector if not in cache */ +#if !_FS_READONLY + if (fp->flag & FA_DIRTY) { /* Write-back dirty sector cache */ + if (disk_write(fs->drv, fp->buf, fp->sect, 1) != RES_OK) ABORT(fs, FR_DISK_ERR); + fp->flag &= (BYTE)~FA_DIRTY; + } +#endif + if (disk_read(fs->drv, fp->buf, sect, 1) != RES_OK) ABORT(fs, FR_DISK_ERR); /* Fill sector cache */ + } +#endif + fp->sect = sect; + } + rcnt = SS(fs) - (UINT)fp->fptr % SS(fs); /* Number of bytes left in the sector */ + if (rcnt > btr) rcnt = btr; /* Clip it by btr if needed */ +#if _FS_TINY + if (move_window(fs, fp->sect) != FR_OK) ABORT(fs, FR_DISK_ERR); /* Move sector window */ + mem_cpy(rbuff, fs->win + fp->fptr % SS(fs), rcnt); /* Extract partial sector */ +#else + mem_cpy(rbuff, fp->buf + fp->fptr % SS(fs), rcnt); /* Extract partial sector */ +#endif + } + + LEAVE_FF(fs, FR_OK); +} + + + + +#if !_FS_READONLY +/*-----------------------------------------------------------------------*/ +/* Write File */ +/*-----------------------------------------------------------------------*/ + +FRESULT f_write ( + FIL* fp, /* Pointer to the file object */ + const void* buff, /* Pointer to the data to be written */ + UINT btw, /* Number of bytes to write */ + UINT* bw /* Pointer to number of bytes written */ +) +{ + FRESULT res; + FATFS *fs; + DWORD clst, sect; + UINT wcnt, cc, csect; + const BYTE *wbuff = (const BYTE*)buff; + + + *bw = 0; /* Clear write byte counter */ + res = validate(&fp->obj, &fs); /* Check validity of the file object */ + if (res != FR_OK || (res = (FRESULT)fp->err) != FR_OK) LEAVE_FF(fs, res); /* Check validity */ + if (!(fp->flag & FA_WRITE)) LEAVE_FF(fs, FR_DENIED); /* Check access mode */ + + /* Check fptr wrap-around (file size cannot reach 4GiB on FATxx) */ + if ((!_FS_EXFAT || fs->fs_type != FS_EXFAT) && (DWORD)(fp->fptr + btw) < (DWORD)fp->fptr) { + btw = (UINT)(0xFFFFFFFF - (DWORD)fp->fptr); + } + + for ( ; btw; /* Repeat until all data written */ + wbuff += wcnt, fp->fptr += wcnt, fp->obj.objsize = (fp->fptr > fp->obj.objsize) ? fp->fptr : fp->obj.objsize, *bw += wcnt, btw -= wcnt) { + if (fp->fptr % SS(fs) == 0) { /* On the sector boundary? */ + csect = (UINT)(fp->fptr / SS(fs)) & (fs->csize - 1); /* Sector offset in the cluster */ + if (csect == 0) { /* On the cluster boundary? */ + if (fp->fptr == 0) { /* On the top of the file? */ + clst = fp->obj.sclust; /* Follow from the origin */ + if (clst == 0) { /* If no cluster is allocated, */ + clst = create_chain(&fp->obj, 0); /* create a new cluster chain */ + } + } else { /* On the middle or end of the file */ +#if _USE_FASTSEEK + if (fp->cltbl) { + clst = clmt_clust(fp, fp->fptr); /* Get cluster# from the CLMT */ + } else +#endif + { + clst = create_chain(&fp->obj, fp->clust); /* Follow or stretch cluster chain on the FAT */ + } + } + if (clst == 0) break; /* Could not allocate a new cluster (disk full) */ + if (clst == 1) ABORT(fs, FR_INT_ERR); + if (clst == 0xFFFFFFFF) ABORT(fs, FR_DISK_ERR); + fp->clust = clst; /* Update current cluster */ + if (fp->obj.sclust == 0) fp->obj.sclust = clst; /* Set start cluster if the first write */ + } +#if _FS_TINY + if (fs->winsect == fp->sect && sync_window(fs) != FR_OK) ABORT(fs, FR_DISK_ERR); /* Write-back sector cache */ +#else + if (fp->flag & FA_DIRTY) { /* Write-back sector cache */ + if (disk_write(fs->drv, fp->buf, fp->sect, 1) != RES_OK) ABORT(fs, FR_DISK_ERR); + fp->flag &= (BYTE)~FA_DIRTY; + } +#endif + sect = clust2sect(fs, fp->clust); /* Get current sector */ + if (!sect) ABORT(fs, FR_INT_ERR); + sect += csect; + cc = btw / SS(fs); /* When remaining bytes >= sector size, */ + if (cc) { /* Write maximum contiguous sectors directly */ + if (csect + cc > fs->csize) { /* Clip at cluster boundary */ + cc = fs->csize - csect; + } + if (disk_write(fs->drv, wbuff, sect, cc) != RES_OK) ABORT(fs, FR_DISK_ERR); +#if _FS_MINIMIZE <= 2 +#if _FS_TINY + if (fs->winsect - sect < cc) { /* Refill sector cache if it gets invalidated by the direct write */ + mem_cpy(fs->win, wbuff + ((fs->winsect - sect) * SS(fs)), SS(fs)); + fs->wflag = 0; + } +#else + if (fp->sect - sect < cc) { /* Refill sector cache if it gets invalidated by the direct write */ + mem_cpy(fp->buf, wbuff + ((fp->sect - sect) * SS(fs)), SS(fs)); + fp->flag &= (BYTE)~FA_DIRTY; + } +#endif +#endif + wcnt = SS(fs) * cc; /* Number of bytes transferred */ + continue; + } +#if _FS_TINY + if (fp->fptr >= fp->obj.objsize) { /* Avoid silly cache filling on the growing edge */ + if (sync_window(fs) != FR_OK) ABORT(fs, FR_DISK_ERR); + fs->winsect = sect; + } +#else + if (fp->sect != sect && /* Fill sector cache with file data */ + fp->fptr < fp->obj.objsize && + disk_read(fs->drv, fp->buf, sect, 1) != RES_OK) { + ABORT(fs, FR_DISK_ERR); + } +#endif + fp->sect = sect; + } + wcnt = SS(fs) - (UINT)fp->fptr % SS(fs); /* Number of bytes left in the sector */ + if (wcnt > btw) wcnt = btw; /* Clip it by btw if needed */ +#if _FS_TINY + if (move_window(fs, fp->sect) != FR_OK) ABORT(fs, FR_DISK_ERR); /* Move sector window */ + mem_cpy(fs->win + fp->fptr % SS(fs), wbuff, wcnt); /* Fit data to the sector */ + fs->wflag = 1; +#else + mem_cpy(fp->buf + fp->fptr % SS(fs), wbuff, wcnt); /* Fit data to the sector */ + fp->flag |= FA_DIRTY; +#endif + } + + fp->flag |= FA_MODIFIED; /* Set file change flag */ + + LEAVE_FF(fs, FR_OK); +} + + + + +/*-----------------------------------------------------------------------*/ +/* Synchronize the File */ +/*-----------------------------------------------------------------------*/ + +FRESULT f_sync ( + FIL* fp /* Pointer to the file object */ +) +{ + FRESULT res; + FATFS *fs; + DWORD tm; + BYTE *dir; +#if _FS_EXFAT + DIR dj; + DEF_NAMBUF +#endif + + res = validate(&fp->obj, &fs); /* Check validity of the file object */ + if (res == FR_OK) { + if (fp->flag & FA_MODIFIED) { /* Is there any change to the file? */ +#if !_FS_TINY + if (fp->flag & FA_DIRTY) { /* Write-back cached data if needed */ + if (disk_write(fs->drv, fp->buf, fp->sect, 1) != RES_OK) LEAVE_FF(fs, FR_DISK_ERR); + fp->flag &= (BYTE)~FA_DIRTY; + } +#endif + /* Update the directory entry */ + tm = GET_FATTIME(); /* Modified time */ +#if _FS_EXFAT + if (fs->fs_type == FS_EXFAT) { + res = fill_first_frag(&fp->obj); /* Fill first fragment on the FAT if needed */ + if (res == FR_OK) { + res = fill_last_frag(&fp->obj, fp->clust, 0xFFFFFFFF); /* Fill last fragment on the FAT if needed */ + } + if (res == FR_OK) { + INIT_NAMBUF(fs); + res = load_obj_dir(&dj, &fp->obj); /* Load directory entry block */ + if (res == FR_OK) { + fs->dirbuf[XDIR_Attr] |= AM_ARC; /* Set archive bit */ + fs->dirbuf[XDIR_GenFlags] = fp->obj.stat | 1; /* Update file allocation info */ + st_dword(fs->dirbuf + XDIR_FstClus, fp->obj.sclust); + st_qword(fs->dirbuf + XDIR_FileSize, fp->obj.objsize); + st_qword(fs->dirbuf + XDIR_ValidFileSize, fp->obj.objsize); + st_dword(fs->dirbuf + XDIR_ModTime, tm); /* Update modified time */ + fs->dirbuf[XDIR_ModTime10] = 0; + st_dword(fs->dirbuf + XDIR_AccTime, 0); + res = store_xdir(&dj); /* Restore it to the directory */ + if (res == FR_OK) { + res = sync_fs(fs); + fp->flag &= (BYTE)~FA_MODIFIED; + } + } + FREE_NAMBUF(); + } + } else +#endif + { + res = move_window(fs, fp->dir_sect); + if (res == FR_OK) { + dir = fp->dir_ptr; + dir[DIR_Attr] |= AM_ARC; /* Set archive bit */ + st_clust(fp->obj.fs, dir, fp->obj.sclust); /* Update file allocation info */ + st_dword(dir + DIR_FileSize, (DWORD)fp->obj.objsize); /* Update file size */ + st_dword(dir + DIR_ModTime, tm); /* Update modified time */ + st_word(dir + DIR_LstAccDate, 0); + fs->wflag = 1; + res = sync_fs(fs); /* Restore it to the directory */ + fp->flag &= (BYTE)~FA_MODIFIED; + } + } + } + } + + LEAVE_FF(fs, res); +} + +#endif /* !_FS_READONLY */ + + + + +/*-----------------------------------------------------------------------*/ +/* Close File */ +/*-----------------------------------------------------------------------*/ + +FRESULT f_close ( + FIL* fp /* Pointer to the file object to be closed */ +) +{ + FRESULT res; + FATFS *fs; + +#if !_FS_READONLY + res = f_sync(fp); /* Flush cached data */ + if (res == FR_OK) +#endif + { + res = validate(&fp->obj, &fs); /* Lock volume */ + if (res == FR_OK) { +#if _FS_LOCK != 0 + res = dec_lock(fp->obj.lockid); /* Decrement file open counter */ + if (res == FR_OK) +#endif + { + fp->obj.fs = 0; /* Invalidate file object */ + } +#if _FS_REENTRANT + unlock_fs(fs, FR_OK); /* Unlock volume */ +#endif + } + } + return res; +} + + + + +#if _FS_RPATH >= 1 +/*-----------------------------------------------------------------------*/ +/* Change Current Directory or Current Drive, Get Current Directory */ +/*-----------------------------------------------------------------------*/ + +#if _VOLUMES >= 2 +FRESULT f_chdrive ( + const TCHAR* path /* Drive number */ +) +{ + int vol; + + + /* Get logical drive number */ + vol = get_ldnumber(&path); + if (vol < 0) return FR_INVALID_DRIVE; + + CurrVol = (BYTE)vol; /* Set it as current volume */ + + return FR_OK; +} +#endif + + +FRESULT f_chdir ( + const TCHAR* path /* Pointer to the directory path */ +) +{ + FRESULT res; + DIR dj; + FATFS *fs; + DEF_NAMBUF + + /* Get logical drive */ + res = find_volume(&path, &fs, 0); + if (res == FR_OK) { + dj.obj.fs = fs; + INIT_NAMBUF(fs); + res = follow_path(&dj, path); /* Follow the path */ + if (res == FR_OK) { /* Follow completed */ + if (dj.fn[NSFLAG] & NS_NONAME) { + fs->cdir = dj.obj.sclust; /* It is the start directory itself */ +#if _FS_EXFAT + if (fs->fs_type == FS_EXFAT) { + fs->cdc_scl = dj.obj.c_scl; + fs->cdc_size = dj.obj.c_size; + fs->cdc_ofs = dj.obj.c_ofs; + } +#endif + } else { + if (dj.obj.attr & AM_DIR) { /* It is a sub-directory */ +#if _FS_EXFAT + if (fs->fs_type == FS_EXFAT) { + fs->cdir = ld_dword(fs->dirbuf + XDIR_FstClus); /* Sub-directory cluster */ + fs->cdc_scl = dj.obj.sclust; /* Save containing directory information */ + fs->cdc_size = ((DWORD)dj.obj.objsize & 0xFFFFFF00) | dj.obj.stat; + fs->cdc_ofs = dj.blk_ofs; + } else +#endif + { + fs->cdir = ld_clust(fs, dj.dir); /* Sub-directory cluster */ + } + } else { + res = FR_NO_PATH; /* Reached but a file */ + } + } + } + FREE_NAMBUF(); + if (res == FR_NO_FILE) res = FR_NO_PATH; + } + + LEAVE_FF(fs, res); +} + + +#if _FS_RPATH >= 2 +FRESULT f_getcwd ( + TCHAR* buff, /* Pointer to the directory path */ + UINT len /* Size of path */ +) +{ + FRESULT res; + DIR dj; + FATFS *fs; + UINT i, n; + DWORD ccl; + TCHAR *tp; + FILINFO fno; + DEF_NAMBUF + + + *buff = 0; + /* Get logical drive */ + res = find_volume((const TCHAR**)&buff, &fs, 0); /* Get current volume */ + if (res == FR_OK) { + dj.obj.fs = fs; + INIT_NAMBUF(fs); + i = len; /* Bottom of buffer (directory stack base) */ + if (!_FS_EXFAT || fs->fs_type != FS_EXFAT) { /* (Cannot do getcwd on exFAT and returns root path) */ + dj.obj.sclust = fs->cdir; /* Start to follow upper directory from current directory */ + while ((ccl = dj.obj.sclust) != 0) { /* Repeat while current directory is a sub-directory */ + res = dir_sdi(&dj, 1 * SZDIRE); /* Get parent directory */ + if (res != FR_OK) break; + res = move_window(fs, dj.sect); + if (res != FR_OK) break; + dj.obj.sclust = ld_clust(fs, dj.dir); /* Goto parent directory */ + res = dir_sdi(&dj, 0); + if (res != FR_OK) break; + do { /* Find the entry links to the child directory */ + res = dir_read(&dj, 0); + if (res != FR_OK) break; + if (ccl == ld_clust(fs, dj.dir)) break; /* Found the entry */ + res = dir_next(&dj, 0); + } while (res == FR_OK); + if (res == FR_NO_FILE) res = FR_INT_ERR;/* It cannot be 'not found'. */ + if (res != FR_OK) break; + get_fileinfo(&dj, &fno); /* Get the directory name and push it to the buffer */ + for (n = 0; fno.fname[n]; n++) ; + if (i < n + 3) { + res = FR_NOT_ENOUGH_CORE; break; + } + while (n) buff[--i] = fno.fname[--n]; + buff[--i] = '/'; + } + } + tp = buff; + if (res == FR_OK) { +#if _VOLUMES >= 2 + *tp++ = '0' + CurrVol; /* Put drive number */ + *tp++ = ':'; +#endif + if (i == len) { /* Root-directory */ + *tp++ = '/'; + } else { /* Sub-directroy */ + do /* Add stacked path str */ + *tp++ = buff[i++]; + while (i < len); + } + } + *tp = 0; + FREE_NAMBUF(); + } + + LEAVE_FF(fs, res); +} + +#endif /* _FS_RPATH >= 2 */ +#endif /* _FS_RPATH >= 1 */ + + + +#if _FS_MINIMIZE <= 2 +/*-----------------------------------------------------------------------*/ +/* Seek File R/W Pointer */ +/*-----------------------------------------------------------------------*/ + +FRESULT f_lseek ( + FIL* fp, /* Pointer to the file object */ + FSIZE_t ofs /* File pointer from top of file */ +) +{ + FRESULT res; + FATFS *fs; + DWORD clst, bcs, nsect; + FSIZE_t ifptr; +#if _USE_FASTSEEK + DWORD cl, pcl, ncl, tcl, dsc, tlen, ulen, *tbl; +#endif + + res = validate(&fp->obj, &fs); /* Check validity of the file object */ + if (res == FR_OK) res = (FRESULT)fp->err; +#if _FS_EXFAT && !_FS_READONLY + if (res == FR_OK && fs->fs_type == FS_EXFAT) { + res = fill_last_frag(&fp->obj, fp->clust, 0xFFFFFFFF); /* Fill last fragment on the FAT if needed */ + } +#endif + if (res != FR_OK) LEAVE_FF(fs, res); + +#if _USE_FASTSEEK + if (fp->cltbl) { /* Fast seek */ + if (ofs == CREATE_LINKMAP) { /* Create CLMT */ + tbl = fp->cltbl; + tlen = *tbl++; ulen = 2; /* Given table size and required table size */ + cl = fp->obj.sclust; /* Origin of the chain */ + if (cl) { + do { + /* Get a fragment */ + tcl = cl; ncl = 0; ulen += 2; /* Top, length and used items */ + do { + pcl = cl; ncl++; + cl = get_fat(&fp->obj, cl); + if (cl <= 1) ABORT(fs, FR_INT_ERR); + if (cl == 0xFFFFFFFF) ABORT(fs, FR_DISK_ERR); + } while (cl == pcl + 1); + if (ulen <= tlen) { /* Store the length and top of the fragment */ + *tbl++ = ncl; *tbl++ = tcl; + } + } while (cl < fs->n_fatent); /* Repeat until end of chain */ + } + *fp->cltbl = ulen; /* Number of items used */ + if (ulen <= tlen) { + *tbl = 0; /* Terminate table */ + } else { + res = FR_NOT_ENOUGH_CORE; /* Given table size is smaller than required */ + } + } else { /* Fast seek */ + if (ofs > fp->obj.objsize) ofs = fp->obj.objsize; /* Clip offset at the file size */ + fp->fptr = ofs; /* Set file pointer */ + if (ofs) { + fp->clust = clmt_clust(fp, ofs - 1); + dsc = clust2sect(fs, fp->clust); + if (!dsc) ABORT(fs, FR_INT_ERR); + dsc += (DWORD)((ofs - 1) / SS(fs)) & (fs->csize - 1); + if (fp->fptr % SS(fs) && dsc != fp->sect) { /* Refill sector cache if needed */ +#if !_FS_TINY +#if !_FS_READONLY + if (fp->flag & FA_DIRTY) { /* Write-back dirty sector cache */ + if (disk_write(fs->drv, fp->buf, fp->sect, 1) != RES_OK) ABORT(fs, FR_DISK_ERR); + fp->flag &= (BYTE)~FA_DIRTY; + } +#endif + if (disk_read(fs->drv, fp->buf, dsc, 1) != RES_OK) ABORT(fs, FR_DISK_ERR); /* Load current sector */ +#endif + fp->sect = dsc; + } + } + } + } else +#endif + + /* Normal Seek */ + { +#if _FS_EXFAT + if (fs->fs_type != FS_EXFAT && ofs >= 0x100000000) ofs = 0xFFFFFFFF; /* Clip at 4GiB-1 if at FATxx */ +#endif + if (ofs > fp->obj.objsize && (_FS_READONLY || !(fp->flag & FA_WRITE))) { /* In read-only mode, clip offset with the file size */ + ofs = fp->obj.objsize; + } + ifptr = fp->fptr; + fp->fptr = nsect = 0; + if (ofs) { + bcs = (DWORD)fs->csize * SS(fs); /* Cluster size (byte) */ + if (ifptr > 0 && + (ofs - 1) / bcs >= (ifptr - 1) / bcs) { /* When seek to same or following cluster, */ + fp->fptr = (ifptr - 1) & ~(FSIZE_t)(bcs - 1); /* start from the current cluster */ + ofs -= fp->fptr; + clst = fp->clust; + } else { /* When seek to back cluster, */ + clst = fp->obj.sclust; /* start from the first cluster */ +#if !_FS_READONLY + if (clst == 0) { /* If no cluster chain, create a new chain */ + clst = create_chain(&fp->obj, 0); + if (clst == 1) ABORT(fs, FR_INT_ERR); + if (clst == 0xFFFFFFFF) ABORT(fs, FR_DISK_ERR); + fp->obj.sclust = clst; + } +#endif + fp->clust = clst; + } + if (clst != 0) { + while (ofs > bcs) { /* Cluster following loop */ + ofs -= bcs; fp->fptr += bcs; +#if !_FS_READONLY + if (fp->flag & FA_WRITE) { /* Check if in write mode or not */ + if (_FS_EXFAT && fp->fptr > fp->obj.objsize) { /* No FAT chain object needs correct objsize to generate FAT value */ + fp->obj.objsize = fp->fptr; + fp->flag |= FA_MODIFIED; + } + clst = create_chain(&fp->obj, clst); /* Follow chain with forceed stretch */ + if (clst == 0) { /* Clip file size in case of disk full */ + ofs = 0; break; + } + } else +#endif + { + clst = get_fat(&fp->obj, clst); /* Follow cluster chain if not in write mode */ + } + if (clst == 0xFFFFFFFF) ABORT(fs, FR_DISK_ERR); + if (clst <= 1 || clst >= fs->n_fatent) ABORT(fs, FR_INT_ERR); + fp->clust = clst; + } + fp->fptr += ofs; + if (ofs % SS(fs)) { + nsect = clust2sect(fs, clst); /* Current sector */ + if (!nsect) ABORT(fs, FR_INT_ERR); + nsect += (DWORD)(ofs / SS(fs)); + } + } + } + if (!_FS_READONLY && fp->fptr > fp->obj.objsize) { /* Set file change flag if the file size is extended */ + fp->obj.objsize = fp->fptr; + fp->flag |= FA_MODIFIED; + } + if (fp->fptr % SS(fs) && nsect != fp->sect) { /* Fill sector cache if needed */ +#if !_FS_TINY +#if !_FS_READONLY + if (fp->flag & FA_DIRTY) { /* Write-back dirty sector cache */ + if (disk_write(fs->drv, fp->buf, fp->sect, 1) != RES_OK) ABORT(fs, FR_DISK_ERR); + fp->flag &= (BYTE)~FA_DIRTY; + } +#endif + if (disk_read(fs->drv, fp->buf, nsect, 1) != RES_OK) ABORT(fs, FR_DISK_ERR); /* Fill sector cache */ +#endif + fp->sect = nsect; + } + } + + LEAVE_FF(fs, res); +} + + + +#if _FS_MINIMIZE <= 1 +/*-----------------------------------------------------------------------*/ +/* Create a Directory Object */ +/*-----------------------------------------------------------------------*/ + +FRESULT f_opendir ( + DIR* dp, /* Pointer to directory object to create */ + const TCHAR* path /* Pointer to the directory path */ +) +{ + FRESULT res; + FATFS *fs; + _FDID *obj; + DEF_NAMBUF + + + if (!dp) return FR_INVALID_OBJECT; + + /* Get logical drive */ + obj = &dp->obj; + res = find_volume(&path, &fs, 0); + if (res == FR_OK) { + obj->fs = fs; + INIT_NAMBUF(fs); + res = follow_path(dp, path); /* Follow the path to the directory */ + if (res == FR_OK) { /* Follow completed */ + if (!(dp->fn[NSFLAG] & NS_NONAME)) { /* It is not the origin directory itself */ + if (obj->attr & AM_DIR) { /* This object is a sub-directory */ +#if _FS_EXFAT + if (fs->fs_type == FS_EXFAT) { + obj->c_scl = obj->sclust; /* Get containing directory inforamation */ + obj->c_size = ((DWORD)obj->objsize & 0xFFFFFF00) | obj->stat; + obj->c_ofs = dp->blk_ofs; + obj->sclust = ld_dword(fs->dirbuf + XDIR_FstClus); /* Get object allocation info */ + obj->objsize = ld_qword(fs->dirbuf + XDIR_FileSize); + obj->stat = fs->dirbuf[XDIR_GenFlags] & 2; + } else +#endif + { + obj->sclust = ld_clust(fs, dp->dir); /* Get object allocation info */ + } + } else { /* This object is a file */ + res = FR_NO_PATH; + } + } + if (res == FR_OK) { + obj->id = fs->id; + res = dir_sdi(dp, 0); /* Rewind directory */ +#if _FS_LOCK != 0 + if (res == FR_OK) { + if (obj->sclust) { + obj->lockid = inc_lock(dp, 0); /* Lock the sub directory */ + if (!obj->lockid) res = FR_TOO_MANY_OPEN_FILES; + } else { + obj->lockid = 0; /* Root directory need not to be locked */ + } + } +#endif + } + } + FREE_NAMBUF(); + if (res == FR_NO_FILE) res = FR_NO_PATH; + } + if (res != FR_OK) obj->fs = 0; /* Invalidate the directory object if function faild */ + + LEAVE_FF(fs, res); +} + + + + +/*-----------------------------------------------------------------------*/ +/* Close Directory */ +/*-----------------------------------------------------------------------*/ + +FRESULT f_closedir ( + DIR *dp /* Pointer to the directory object to be closed */ +) +{ + FRESULT res; + FATFS *fs; + + + res = validate(&dp->obj, &fs); /* Check validity of the file object */ + if (res == FR_OK) { +#if _FS_LOCK != 0 + if (dp->obj.lockid) { /* Decrement sub-directory open counter */ + res = dec_lock(dp->obj.lockid); + } + if (res == FR_OK) +#endif + { + dp->obj.fs = 0; /* Invalidate directory object */ + } +#if _FS_REENTRANT + unlock_fs(fs, FR_OK); /* Unlock volume */ +#endif + } + return res; +} + + + + +/*-----------------------------------------------------------------------*/ +/* Read Directory Entries in Sequence */ +/*-----------------------------------------------------------------------*/ + +FRESULT f_readdir ( + DIR* dp, /* Pointer to the open directory object */ + FILINFO* fno /* Pointer to file information to return */ +) +{ + FRESULT res; + FATFS *fs; + DEF_NAMBUF + + + res = validate(&dp->obj, &fs); /* Check validity of the directory object */ + if (res == FR_OK) { + if (!fno) { + res = dir_sdi(dp, 0); /* Rewind the directory object */ + } else { + INIT_NAMBUF(fs); + res = dir_read(dp, 0); /* Read an item */ + if (res == FR_NO_FILE) res = FR_OK; /* Ignore end of directory */ + if (res == FR_OK) { /* A valid entry is found */ + get_fileinfo(dp, fno); /* Get the object information */ + res = dir_next(dp, 0); /* Increment index for next */ + if (res == FR_NO_FILE) res = FR_OK; /* Ignore end of directory now */ + } + FREE_NAMBUF(); + } + } + LEAVE_FF(fs, res); +} + + + +#if _USE_FIND +/*-----------------------------------------------------------------------*/ +/* Find Next File */ +/*-----------------------------------------------------------------------*/ + +FRESULT f_findnext ( + DIR* dp, /* Pointer to the open directory object */ + FILINFO* fno /* Pointer to the file information structure */ +) +{ + FRESULT res; + + + for (;;) { + res = f_readdir(dp, fno); /* Get a directory item */ + if (res != FR_OK || !fno || !fno->fname[0]) break; /* Terminate if any error or end of directory */ + if (pattern_matching(dp->pat, fno->fname, 0, 0)) break; /* Test for the file name */ +#if _USE_LFN != 0 && _USE_FIND == 2 + if (pattern_matching(dp->pat, fno->altname, 0, 0)) break; /* Test for alternative name if exist */ +#endif + } + return res; +} + + + +/*-----------------------------------------------------------------------*/ +/* Find First File */ +/*-----------------------------------------------------------------------*/ + +FRESULT f_findfirst ( + DIR* dp, /* Pointer to the blank directory object */ + FILINFO* fno, /* Pointer to the file information structure */ + const TCHAR* path, /* Pointer to the directory to open */ + const TCHAR* pattern /* Pointer to the matching pattern */ +) +{ + FRESULT res; + + + dp->pat = pattern; /* Save pointer to pattern string */ + res = f_opendir(dp, path); /* Open the target directory */ + if (res == FR_OK) { + res = f_findnext(dp, fno); /* Find the first item */ + } + return res; +} + +#endif /* _USE_FIND */ + + + +#if _FS_MINIMIZE == 0 +/*-----------------------------------------------------------------------*/ +/* Get File Status */ +/*-----------------------------------------------------------------------*/ + +FRESULT f_stat ( + const TCHAR* path, /* Pointer to the file path */ + FILINFO* fno /* Pointer to file information to return */ +) +{ + FRESULT res; + DIR dj; + DEF_NAMBUF + + + /* Get logical drive */ + res = find_volume(&path, &dj.obj.fs, 0); + if (res == FR_OK) { + INIT_NAMBUF(dj.obj.fs); + res = follow_path(&dj, path); /* Follow the file path */ + if (res == FR_OK) { /* Follow completed */ + if (dj.fn[NSFLAG] & NS_NONAME) { /* It is origin directory */ + res = FR_INVALID_NAME; + } else { /* Found an object */ + if (fno) get_fileinfo(&dj, fno); + } + } + FREE_NAMBUF(); + } + + LEAVE_FF(dj.obj.fs, res); +} + + + +#if !_FS_READONLY +/*-----------------------------------------------------------------------*/ +/* Get Number of Free Clusters */ +/*-----------------------------------------------------------------------*/ + +FRESULT f_getfree ( + const TCHAR* path, /* Path name of the logical drive number */ + DWORD* nclst, /* Pointer to a variable to return number of free clusters */ + FATFS** fatfs /* Pointer to return pointer to corresponding file system object */ +) +{ + FRESULT res; + FATFS *fs; + DWORD nfree, clst, sect, stat; + UINT i; + BYTE *p; + _FDID obj; + + + /* Get logical drive */ + res = find_volume(&path, &fs, 0); + if (res == FR_OK) { + *fatfs = fs; /* Return ptr to the fs object */ + /* If free_clst is valid, return it without full cluster scan */ + if (fs->free_clst <= fs->n_fatent - 2) { + *nclst = fs->free_clst; + } else { + /* Get number of free clusters */ + nfree = 0; + if (fs->fs_type == FS_FAT12) { /* FAT12: Sector unalighed FAT entries */ + clst = 2; obj.fs = fs; + do { + stat = get_fat(&obj, clst); + if (stat == 0xFFFFFFFF) { res = FR_DISK_ERR; break; } + if (stat == 1) { res = FR_INT_ERR; break; } + if (stat == 0) nfree++; + } while (++clst < fs->n_fatent); + } else { +#if _FS_EXFAT + if (fs->fs_type == FS_EXFAT) { /* exFAT: Scan bitmap table */ + BYTE bm; + UINT b; + + clst = fs->n_fatent - 2; + sect = fs->database; + i = 0; + do { + if (i == 0 && (res = move_window(fs, sect++)) != FR_OK) break; + for (b = 8, bm = fs->win[i]; b && clst; b--, clst--) { + if (!(bm & 1)) nfree++; + bm >>= 1; + } + i = (i + 1) % SS(fs); + } while (clst); + } else +#endif + { /* FAT16/32: Sector alighed FAT entries */ + clst = fs->n_fatent; sect = fs->fatbase; + i = 0; p = 0; + do { + if (i == 0) { + res = move_window(fs, sect++); + if (res != FR_OK) break; + p = fs->win; + i = SS(fs); + } + if (fs->fs_type == FS_FAT16) { + if (ld_word(p) == 0) nfree++; + p += 2; i -= 2; + } else { + if ((ld_dword(p) & 0x0FFFFFFF) == 0) nfree++; + p += 4; i -= 4; + } + } while (--clst); + } + } + *nclst = nfree; /* Return the free clusters */ + fs->free_clst = nfree; /* Now free_clst is valid */ + fs->fsi_flag |= 1; /* FSInfo is to be updated */ + } + } + + LEAVE_FF(fs, res); +} + + + + +/*-----------------------------------------------------------------------*/ +/* Truncate File */ +/*-----------------------------------------------------------------------*/ + +FRESULT f_truncate ( + FIL* fp /* Pointer to the file object */ +) +{ + FRESULT res; + FATFS *fs; + DWORD ncl; + + + res = validate(&fp->obj, &fs); /* Check validity of the file object */ + if (res != FR_OK || (res = (FRESULT)fp->err) != FR_OK) LEAVE_FF(fs, res); + if (!(fp->flag & FA_WRITE)) LEAVE_FF(fs, FR_DENIED); /* Check access mode */ + + if (fp->fptr < fp->obj.objsize) { /* Process when fptr is not on the eof */ + if (fp->fptr == 0) { /* When set file size to zero, remove entire cluster chain */ + res = remove_chain(&fp->obj, fp->obj.sclust, 0); + fp->obj.sclust = 0; + } else { /* When truncate a part of the file, remove remaining clusters */ + ncl = get_fat(&fp->obj, fp->clust); + res = FR_OK; + if (ncl == 0xFFFFFFFF) res = FR_DISK_ERR; + if (ncl == 1) res = FR_INT_ERR; + if (res == FR_OK && ncl < fs->n_fatent) { + res = remove_chain(&fp->obj, ncl, fp->clust); + } + } + fp->obj.objsize = fp->fptr; /* Set file size to current R/W point */ + fp->flag |= FA_MODIFIED; +#if !_FS_TINY + if (res == FR_OK && (fp->flag & FA_DIRTY)) { + if (disk_write(fs->drv, fp->buf, fp->sect, 1) != RES_OK) { + res = FR_DISK_ERR; + } else { + fp->flag &= (BYTE)~FA_DIRTY; + } + } +#endif + if (res != FR_OK) ABORT(fs, res); + } + + LEAVE_FF(fs, res); +} + + + + +/*-----------------------------------------------------------------------*/ +/* Delete a File/Directory */ +/*-----------------------------------------------------------------------*/ + +FRESULT f_unlink ( + const TCHAR* path /* Pointer to the file or directory path */ +) +{ + FRESULT res; + DIR dj, sdj; + DWORD dclst = 0; + FATFS *fs; +#if _FS_EXFAT + _FDID obj; +#endif + DEF_NAMBUF + + + /* Get logical drive */ + res = find_volume(&path, &fs, FA_WRITE); + dj.obj.fs = fs; + if (res == FR_OK) { + INIT_NAMBUF(fs); + res = follow_path(&dj, path); /* Follow the file path */ + if (_FS_RPATH && res == FR_OK && (dj.fn[NSFLAG] & NS_DOT)) { + res = FR_INVALID_NAME; /* Cannot remove dot entry */ + } +#if _FS_LOCK != 0 + if (res == FR_OK) res = chk_lock(&dj, 2); /* Check if it is an open object */ +#endif + if (res == FR_OK) { /* The object is accessible */ + if (dj.fn[NSFLAG] & NS_NONAME) { + res = FR_INVALID_NAME; /* Cannot remove the origin directory */ + } else { + if (dj.obj.attr & AM_RDO) { + res = FR_DENIED; /* Cannot remove R/O object */ + } + } + if (res == FR_OK) { +#if _FS_EXFAT + obj.fs = fs; + if (fs->fs_type == FS_EXFAT) { + obj.sclust = dclst = ld_dword(fs->dirbuf + XDIR_FstClus); + obj.objsize = ld_qword(fs->dirbuf + XDIR_FileSize); + obj.stat = fs->dirbuf[XDIR_GenFlags] & 2; + } else +#endif + { + dclst = ld_clust(fs, dj.dir); + } + if (dj.obj.attr & AM_DIR) { /* Is it a sub-directory? */ +#if _FS_RPATH != 0 + if (dclst == fs->cdir) { /* Is it the current directory? */ + res = FR_DENIED; + } else +#endif + { + sdj.obj.fs = fs; /* Open the sub-directory */ + sdj.obj.sclust = dclst; +#if _FS_EXFAT + if (fs->fs_type == FS_EXFAT) { + sdj.obj.objsize = obj.objsize; + sdj.obj.stat = obj.stat; + } +#endif + res = dir_sdi(&sdj, 0); + if (res == FR_OK) { + res = dir_read(&sdj, 0); /* Read an item */ + if (res == FR_OK) res = FR_DENIED; /* Not empty? */ + if (res == FR_NO_FILE) res = FR_OK; /* Empty? */ + } + } + } + } + if (res == FR_OK) { + res = dir_remove(&dj); /* Remove the directory entry */ + if (res == FR_OK && dclst) { /* Remove the cluster chain if exist */ +#if _FS_EXFAT + res = remove_chain(&obj, dclst, 0); +#else + res = remove_chain(&dj.obj, dclst, 0); +#endif + } + if (res == FR_OK) res = sync_fs(fs); + } + } + FREE_NAMBUF(); + } + + LEAVE_FF(fs, res); +} + + + + +/*-----------------------------------------------------------------------*/ +/* Create a Directory */ +/*-----------------------------------------------------------------------*/ + +FRESULT f_mkdir ( + const TCHAR* path /* Pointer to the directory path */ +) +{ + FRESULT res; + DIR dj; + FATFS *fs; + BYTE *dir; + UINT n; + DWORD dsc, dcl, pcl, tm; + DEF_NAMBUF + + + /* Get logical drive */ + res = find_volume(&path, &fs, FA_WRITE); + dj.obj.fs = fs; + if (res == FR_OK) { + INIT_NAMBUF(fs); + res = follow_path(&dj, path); /* Follow the file path */ + if (res == FR_OK) res = FR_EXIST; /* Any object with same name is already existing */ + if (_FS_RPATH && res == FR_NO_FILE && (dj.fn[NSFLAG] & NS_DOT)) { + res = FR_INVALID_NAME; + } + if (res == FR_NO_FILE) { /* Can create a new directory */ + dcl = create_chain(&dj.obj, 0); /* Allocate a cluster for the new directory table */ + dj.obj.objsize = (DWORD)fs->csize * SS(fs); + res = FR_OK; + if (dcl == 0) res = FR_DENIED; /* No space to allocate a new cluster */ + if (dcl == 1) res = FR_INT_ERR; + if (dcl == 0xFFFFFFFF) res = FR_DISK_ERR; + if (res == FR_OK) res = sync_window(fs); /* Flush FAT */ + tm = GET_FATTIME(); + if (res == FR_OK) { /* Initialize the new directory table */ + dsc = clust2sect(fs, dcl); + dir = fs->win; + mem_set(dir, 0, SS(fs)); + if (!_FS_EXFAT || fs->fs_type != FS_EXFAT) { + mem_set(dir + DIR_Name, ' ', 11); /* Create "." entry */ + dir[DIR_Name] = '.'; + dir[DIR_Attr] = AM_DIR; + st_dword(dir + DIR_ModTime, tm); + st_clust(fs, dir, dcl); + mem_cpy(dir + SZDIRE, dir, SZDIRE); /* Create ".." entry */ + dir[SZDIRE + 1] = '.'; pcl = dj.obj.sclust; + if (fs->fs_type == FS_FAT32 && pcl == fs->dirbase) pcl = 0; + st_clust(fs, dir + SZDIRE, pcl); + } + for (n = fs->csize; n; n--) { /* Write dot entries and clear following sectors */ + fs->winsect = dsc++; + fs->wflag = 1; + res = sync_window(fs); + if (res != FR_OK) break; + mem_set(dir, 0, SS(fs)); + } + } + if (res == FR_OK) { + res = dir_register(&dj); /* Register the object to the directoy */ + } + if (res == FR_OK) { +#if _FS_EXFAT + if (fs->fs_type == FS_EXFAT) { /* Initialize directory entry block */ + st_dword(fs->dirbuf + XDIR_ModTime, tm); /* Created time */ + st_dword(fs->dirbuf + XDIR_FstClus, dcl); /* Table start cluster */ + st_dword(fs->dirbuf + XDIR_FileSize, (DWORD)dj.obj.objsize); /* File size needs to be valid */ + st_dword(fs->dirbuf + XDIR_ValidFileSize, (DWORD)dj.obj.objsize); + fs->dirbuf[XDIR_GenFlags] = 3; /* Initialize the object flag (contiguous) */ + fs->dirbuf[XDIR_Attr] = AM_DIR; /* Attribute */ + res = store_xdir(&dj); + } else +#endif + { + dir = dj.dir; + st_dword(dir + DIR_ModTime, tm); /* Created time */ + st_clust(fs, dir, dcl); /* Table start cluster */ + dir[DIR_Attr] = AM_DIR; /* Attribute */ + fs->wflag = 1; + } + if (res == FR_OK) { + res = sync_fs(fs); + } + } else { + remove_chain(&dj.obj, dcl, 0); /* Could not register, remove cluster chain */ + } + } + FREE_NAMBUF(); + } + + LEAVE_FF(fs, res); +} + + + + +/*-----------------------------------------------------------------------*/ +/* Rename a File/Directory */ +/*-----------------------------------------------------------------------*/ + +FRESULT f_rename ( + const TCHAR* path_old, /* Pointer to the object name to be renamed */ + const TCHAR* path_new /* Pointer to the new name */ +) +{ + FRESULT res; + DIR djo, djn; + FATFS *fs; + BYTE buf[_FS_EXFAT ? SZDIRE * 2 : 24], *dir; + DWORD dw; + DEF_NAMBUF + + + get_ldnumber(&path_new); /* Snip drive number of new name off */ + res = find_volume(&path_old, &fs, FA_WRITE); /* Get logical drive of the old object */ + if (res == FR_OK) { + djo.obj.fs = fs; + INIT_NAMBUF(fs); + res = follow_path(&djo, path_old); /* Check old object */ + if (res == FR_OK && (djo.fn[NSFLAG] & (NS_DOT | NS_NONAME))) res = FR_INVALID_NAME; /* Check validity of name */ +#if _FS_LOCK != 0 + if (res == FR_OK) { + res = chk_lock(&djo, 2); + } +#endif + if (res == FR_OK) { /* Object to be renamed is found */ +#if _FS_EXFAT + if (fs->fs_type == FS_EXFAT) { /* At exFAT */ + BYTE nf, nn; + WORD nh; + + mem_cpy(buf, fs->dirbuf, SZDIRE * 2); /* Save 85+C0 entry of old object */ + mem_cpy(&djn, &djo, sizeof djo); + res = follow_path(&djn, path_new); /* Make sure if new object name is not in use */ + if (res == FR_OK) { /* Is new name already in use by any other object? */ + res = (djn.obj.sclust == djo.obj.sclust && djn.dptr == djo.dptr) ? FR_NO_FILE : FR_EXIST; + } + if (res == FR_NO_FILE) { /* It is a valid path and no name collision */ + res = dir_register(&djn); /* Register the new entry */ + if (res == FR_OK) { + nf = fs->dirbuf[XDIR_NumSec]; nn = fs->dirbuf[XDIR_NumName]; + nh = ld_word(fs->dirbuf + XDIR_NameHash); + mem_cpy(fs->dirbuf, buf, SZDIRE * 2); + fs->dirbuf[XDIR_NumSec] = nf; fs->dirbuf[XDIR_NumName] = nn; + st_word(fs->dirbuf + XDIR_NameHash, nh); +/* Start of critical section where an interruption can cause a cross-link */ + res = store_xdir(&djn); + } + } + } else +#endif + { /* At FAT12/FAT16/FAT32 */ + mem_cpy(buf, djo.dir + DIR_Attr, 21); /* Save information about the object except name */ + mem_cpy(&djn, &djo, sizeof (DIR)); /* Duplicate the directory object */ + res = follow_path(&djn, path_new); /* Make sure if new object name is not in use */ + if (res == FR_OK) { /* Is new name already in use by any other object? */ + res = (djn.obj.sclust == djo.obj.sclust && djn.dptr == djo.dptr) ? FR_NO_FILE : FR_EXIST; + } + if (res == FR_NO_FILE) { /* It is a valid path and no name collision */ + res = dir_register(&djn); /* Register the new entry */ + if (res == FR_OK) { + dir = djn.dir; /* Copy information about object except name */ + mem_cpy(dir + 13, buf + 2, 19); + dir[DIR_Attr] = buf[0] | AM_ARC; + fs->wflag = 1; + if ((dir[DIR_Attr] & AM_DIR) && djo.obj.sclust != djn.obj.sclust) { /* Update .. entry in the sub-directory if needed */ + dw = clust2sect(fs, ld_clust(fs, dir)); + if (!dw) { + res = FR_INT_ERR; + } else { +/* Start of critical section where an interruption can cause a cross-link */ + res = move_window(fs, dw); + dir = fs->win + SZDIRE * 1; /* Ptr to .. entry */ + if (res == FR_OK && dir[1] == '.') { + st_clust(fs, dir, djn.obj.sclust); + fs->wflag = 1; + } + } + } + } + } + } + if (res == FR_OK) { + res = dir_remove(&djo); /* Remove old entry */ + if (res == FR_OK) { + res = sync_fs(fs); + } + } +/* End of the critical section */ + } + FREE_NAMBUF(); + } + + LEAVE_FF(fs, res); +} + +#endif /* !_FS_READONLY */ +#endif /* _FS_MINIMIZE == 0 */ +#endif /* _FS_MINIMIZE <= 1 */ +#endif /* _FS_MINIMIZE <= 2 */ + + + +#if _USE_CHMOD && !_FS_READONLY +/*-----------------------------------------------------------------------*/ +/* Change Attribute */ +/*-----------------------------------------------------------------------*/ + +FRESULT f_chmod ( + const TCHAR* path, /* Pointer to the file path */ + BYTE attr, /* Attribute bits */ + BYTE mask /* Attribute mask to change */ +) +{ + FRESULT res; + DIR dj; + FATFS *fs; + DEF_NAMBUF + + + res = find_volume(&path, &fs, FA_WRITE); /* Get logical drive */ + dj.obj.fs = fs; + if (res == FR_OK) { + INIT_NAMBUF(fs); + res = follow_path(&dj, path); /* Follow the file path */ + if (res == FR_OK && (dj.fn[NSFLAG] & (NS_DOT | NS_NONAME))) res = FR_INVALID_NAME; /* Check object validity */ + if (res == FR_OK) { + mask &= AM_RDO|AM_HID|AM_SYS|AM_ARC; /* Valid attribute mask */ +#if _FS_EXFAT + if (fs->fs_type == FS_EXFAT) { + fs->dirbuf[XDIR_Attr] = (attr & mask) | (fs->dirbuf[XDIR_Attr] & (BYTE)~mask); /* Apply attribute change */ + res = store_xdir(&dj); + } else +#endif + { + dj.dir[DIR_Attr] = (attr & mask) | (dj.dir[DIR_Attr] & (BYTE)~mask); /* Apply attribute change */ + fs->wflag = 1; + } + if (res == FR_OK) { + res = sync_fs(fs); + } + } + FREE_NAMBUF(); + } + + LEAVE_FF(fs, res); +} + + + + +/*-----------------------------------------------------------------------*/ +/* Change Timestamp */ +/*-----------------------------------------------------------------------*/ + +FRESULT f_utime ( + const TCHAR* path, /* Pointer to the file/directory name */ + const FILINFO* fno /* Pointer to the time stamp to be set */ +) +{ + FRESULT res; + DIR dj; + FATFS *fs; + DEF_NAMBUF + + + res = find_volume(&path, &fs, FA_WRITE); /* Get logical drive */ + dj.obj.fs = fs; + if (res == FR_OK) { + INIT_NAMBUF(fs); + res = follow_path(&dj, path); /* Follow the file path */ + if (res == FR_OK && (dj.fn[NSFLAG] & (NS_DOT | NS_NONAME))) res = FR_INVALID_NAME; /* Check object validity */ + if (res == FR_OK) { +#if _FS_EXFAT + if (fs->fs_type == FS_EXFAT) { + st_dword(fs->dirbuf + XDIR_ModTime, (DWORD)fno->fdate << 16 | fno->ftime); + res = store_xdir(&dj); + } else +#endif + { + st_dword(dj.dir + DIR_ModTime, (DWORD)fno->fdate << 16 | fno->ftime); + fs->wflag = 1; + } + if (res == FR_OK) { + res = sync_fs(fs); + } + } + FREE_NAMBUF(); + } + + LEAVE_FF(fs, res); +} + +#endif /* _USE_CHMOD && !_FS_READONLY */ + + + +#if _USE_LABEL +/*-----------------------------------------------------------------------*/ +/* Get Volume Label */ +/*-----------------------------------------------------------------------*/ + +FRESULT f_getlabel ( + const TCHAR* path, /* Path name of the logical drive number */ + TCHAR* label, /* Pointer to a buffer to return the volume label */ + DWORD* vsn /* Pointer to a variable to return the volume serial number */ +) +{ + FRESULT res; + DIR dj; + FATFS *fs; + UINT si, di; +#if _LFN_UNICODE || _FS_EXFAT + WCHAR w; +#endif + + /* Get logical drive */ + res = find_volume(&path, &fs, 0); + + /* Get volume label */ + if (res == FR_OK && label) { + dj.obj.fs = fs; dj.obj.sclust = 0; /* Open root directory */ + res = dir_sdi(&dj, 0); + if (res == FR_OK) { + res = dir_read(&dj, 1); /* Find a volume label entry */ + if (res == FR_OK) { +#if _FS_EXFAT + if (fs->fs_type == FS_EXFAT) { + for (si = di = 0; si < dj.dir[XDIR_NumLabel]; si++) { /* Extract volume label from 83 entry */ + w = ld_word(dj.dir + XDIR_Label + si * 2); +#if _LFN_UNICODE + label[di++] = w; +#else + w = ff_convert(w, 0); /* Unicode -> OEM */ + if (w == 0) w = '?'; /* Replace wrong character */ + if (_DF1S && w >= 0x100) label[di++] = (char)(w >> 8); + label[di++] = (char)w; +#endif + } + label[di] = 0; + } else +#endif + { + si = di = 0; /* Extract volume label from AM_VOL entry with code comversion */ + do { +#if _LFN_UNICODE + w = (si < 11) ? dj.dir[si++] : ' '; + if (IsDBCS1(w) && si < 11 && IsDBCS2(dj.dir[si])) { + w = w << 8 | dj.dir[si++]; + } + label[di++] = ff_convert(w, 1); /* OEM -> Unicode */ +#else + label[di++] = dj.dir[si++]; +#endif + } while (di < 11); + do { /* Truncate trailing spaces */ + label[di] = 0; + if (di == 0) break; + } while (label[--di] == ' '); + } + } + } + if (res == FR_NO_FILE) { /* No label entry and return nul string */ + label[0] = 0; + res = FR_OK; + } + } + + /* Get volume serial number */ + if (res == FR_OK && vsn) { + res = move_window(fs, fs->volbase); + if (res == FR_OK) { + switch (fs->fs_type) { + case FS_EXFAT: + di = BPB_VolIDEx; break; + + case FS_FAT32: + di = BS_VolID32; break; + + default: + di = BS_VolID; + } + *vsn = ld_dword(fs->win + di); + } + } + + LEAVE_FF(fs, res); +} + + + +#if !_FS_READONLY +/*-----------------------------------------------------------------------*/ +/* Set Volume Label */ +/*-----------------------------------------------------------------------*/ + +FRESULT f_setlabel ( + const TCHAR* label /* Pointer to the volume label to set */ +) +{ + FRESULT res; + DIR dj; + FATFS *fs; + BYTE dirvn[22]; + UINT i, j, slen; + WCHAR w; + static const char badchr[] = "\"*+,.:;<=>\?[]|\x7F"; + + + /* Get logical drive */ + res = find_volume(&label, &fs, FA_WRITE); + if (res != FR_OK) LEAVE_FF(fs, res); + dj.obj.fs = fs; + + /* Get length of given volume label */ + for (slen = 0; (UINT)label[slen] >= ' '; slen++) ; /* Get name length */ + +#if _FS_EXFAT + if (fs->fs_type == FS_EXFAT) { /* On the exFAT volume */ + for (i = j = 0; i < slen; ) { /* Create volume label in directory form */ + w = label[i++]; +#if !_LFN_UNICODE + if (IsDBCS1(w)) { + w = (i < slen && IsDBCS2(label[i])) ? w << 8 | (BYTE)label[i++] : 0; + } + w = ff_convert(w, 1); +#endif + if (w == 0 || chk_chr(badchr, w) || j == 22) { /* Check validity check validity of the volume label */ + LEAVE_FF(fs, FR_INVALID_NAME); + } + st_word(dirvn + j, w); j += 2; + } + slen = j; + } else +#endif + { /* On the FAT12/16/32 volume */ + for ( ; slen && label[slen - 1] == ' '; slen--) ; /* Remove trailing spaces */ + if (slen) { /* Is there a volume label to be set? */ + dirvn[0] = 0; i = j = 0; /* Create volume label in directory form */ + do { +#if _LFN_UNICODE + w = ff_convert(ff_wtoupper(label[i++]), 0); +#else + w = (BYTE)label[i++]; + if (IsDBCS1(w)) { + w = (j < 10 && i < slen && IsDBCS2(label[i])) ? w << 8 | (BYTE)label[i++] : 0; + } +#if _USE_LFN != 0 + w = ff_convert(ff_wtoupper(ff_convert(w, 1)), 0); +#else + if (IsLower(w)) w -= 0x20; /* To upper ASCII characters */ +#ifdef _EXCVT + if (w >= 0x80) w = ExCvt[w - 0x80]; /* To upper extended characters (SBCS cfg) */ +#else + if (!_DF1S && w >= 0x80) w = 0; /* Reject extended characters (ASCII cfg) */ +#endif +#endif +#endif + if (w == 0 || chk_chr(badchr, w) || j >= (UINT)((w >= 0x100) ? 10 : 11)) { /* Reject invalid characters for volume label */ + LEAVE_FF(fs, FR_INVALID_NAME); + } + if (w >= 0x100) dirvn[j++] = (BYTE)(w >> 8); + dirvn[j++] = (BYTE)w; + } while (i < slen); + while (j < 11) dirvn[j++] = ' '; /* Fill remaining name field */ + if (dirvn[0] == DDEM) LEAVE_FF(fs, FR_INVALID_NAME); /* Reject illegal name (heading DDEM) */ + } + } + + /* Set volume label */ + dj.obj.sclust = 0; /* Open root directory */ + res = dir_sdi(&dj, 0); + if (res == FR_OK) { + res = dir_read(&dj, 1); /* Get volume label entry */ + if (res == FR_OK) { + if (_FS_EXFAT && fs->fs_type == FS_EXFAT) { + dj.dir[XDIR_NumLabel] = (BYTE)(slen / 2); /* Change the volume label */ + mem_cpy(dj.dir + XDIR_Label, dirvn, slen); + } else { + if (slen) { + mem_cpy(dj.dir, dirvn, 11); /* Change the volume label */ + } else { + dj.dir[DIR_Name] = DDEM; /* Remove the volume label */ + } + } + fs->wflag = 1; + res = sync_fs(fs); + } else { /* No volume label entry is found or error */ + if (res == FR_NO_FILE) { + res = FR_OK; + if (slen) { /* Create a volume label entry */ + res = dir_alloc(&dj, 1); /* Allocate an entry */ + if (res == FR_OK) { + mem_set(dj.dir, 0, SZDIRE); /* Clear the entry */ + if (_FS_EXFAT && fs->fs_type == FS_EXFAT) { + dj.dir[XDIR_Type] = 0x83; /* Create 83 entry */ + dj.dir[XDIR_NumLabel] = (BYTE)(slen / 2); + mem_cpy(dj.dir + XDIR_Label, dirvn, slen); + } else { + dj.dir[DIR_Attr] = AM_VOL; /* Create volume label entry */ + mem_cpy(dj.dir, dirvn, 11); + } + fs->wflag = 1; + res = sync_fs(fs); + } + } + } + } + } + + LEAVE_FF(fs, res); +} + +#endif /* !_FS_READONLY */ +#endif /* _USE_LABEL */ + + + +#if _USE_EXPAND && !_FS_READONLY +/*-----------------------------------------------------------------------*/ +/* Allocate a Contiguous Blocks to the File */ +/*-----------------------------------------------------------------------*/ + +FRESULT f_expand ( + FIL* fp, /* Pointer to the file object */ + FSIZE_t fsz, /* File size to be expanded to */ + BYTE opt /* Operation mode 0:Find and prepare or 1:Find and allocate */ +) +{ + FRESULT res; + FATFS *fs; + DWORD n, clst, stcl, scl, ncl, tcl, lclst; + + + res = validate(&fp->obj, &fs); /* Check validity of the file object */ + if (res != FR_OK || (res = (FRESULT)fp->err) != FR_OK) LEAVE_FF(fs, res); + if (fsz == 0 || fp->obj.objsize != 0 || !(fp->flag & FA_WRITE)) LEAVE_FF(fs, FR_DENIED); +#if _FS_EXFAT + if (fs->fs_type != FS_EXFAT && fsz >= 0x100000000) LEAVE_FF(fs, FR_DENIED); /* Check if in size limit */ +#endif + n = (DWORD)fs->csize * SS(fs); /* Cluster size */ + tcl = (DWORD)(fsz / n) + ((fsz & (n - 1)) ? 1 : 0); /* Number of clusters required */ + stcl = fs->last_clst; lclst = 0; + if (stcl < 2 || stcl >= fs->n_fatent) stcl = 2; + +#if _FS_EXFAT + if (fs->fs_type == FS_EXFAT) { + scl = find_bitmap(fs, stcl, tcl); /* Find a contiguous cluster block */ + if (scl == 0) res = FR_DENIED; /* No contiguous cluster block was found */ + if (scl == 0xFFFFFFFF) res = FR_DISK_ERR; + if (res == FR_OK) { /* A contiguous free area is found */ + if (opt) { /* Allocate it now */ + res = change_bitmap(fs, scl, tcl, 1); /* Mark the cluster block 'in use' */ + lclst = scl + tcl - 1; + } else { /* Set it as suggested point for next allocation */ + lclst = scl - 1; + } + } + } else +#endif + { + scl = clst = stcl; ncl = 0; + for (;;) { /* Find a contiguous cluster block */ + n = get_fat(&fp->obj, clst); + if (++clst >= fs->n_fatent) clst = 2; + if (n == 1) { res = FR_INT_ERR; break; } + if (n == 0xFFFFFFFF) { res = FR_DISK_ERR; break; } + if (n == 0) { /* Is it a free cluster? */ + if (++ncl == tcl) break; /* Break if a contiguous cluster block is found */ + } else { + scl = clst; ncl = 0; /* Not a free cluster */ + } + if (clst == stcl) { res = FR_DENIED; break; } /* No contiguous cluster? */ + } + if (res == FR_OK) { /* A contiguous free area is found */ + if (opt) { /* Allocate it now */ + for (clst = scl, n = tcl; n; clst++, n--) { /* Create a cluster chain on the FAT */ + res = put_fat(fs, clst, (n == 1) ? 0xFFFFFFFF : clst + 1); + if (res != FR_OK) break; + lclst = clst; + } + } else { /* Set it as suggested point for next allocation */ + lclst = scl - 1; + } + } + } + + if (res == FR_OK) { + fs->last_clst = lclst; /* Set suggested start cluster to start next */ + if (opt) { /* Is it allocated now? */ + fp->obj.sclust = scl; /* Update object allocation information */ + fp->obj.objsize = fsz; + if (_FS_EXFAT) fp->obj.stat = 2; /* Set status 'contiguous chain' */ + fp->flag |= FA_MODIFIED; + if (fs->free_clst <= fs->n_fatent - 2) { /* Update FSINFO */ + fs->free_clst -= tcl; + fs->fsi_flag |= 1; + } + } + } + + LEAVE_FF(fs, res); +} + +#endif /* _USE_EXPAND && !_FS_READONLY */ + + + +#if _USE_FORWARD +/*-----------------------------------------------------------------------*/ +/* Forward data to the stream directly */ +/*-----------------------------------------------------------------------*/ + +FRESULT f_forward ( + FIL* fp, /* Pointer to the file object */ + UINT (*func)(const BYTE*,UINT), /* Pointer to the streaming function */ + UINT btf, /* Number of bytes to forward */ + UINT* bf /* Pointer to number of bytes forwarded */ +) +{ + FRESULT res; + FATFS *fs; + DWORD clst, sect; + FSIZE_t remain; + UINT rcnt, csect; + BYTE *dbuf; + + + *bf = 0; /* Clear transfer byte counter */ + res = validate(&fp->obj, &fs); /* Check validity of the file object */ + if (res != FR_OK || (res = (FRESULT)fp->err) != FR_OK) LEAVE_FF(fs, res); + if (!(fp->flag & FA_READ)) LEAVE_FF(fs, FR_DENIED); /* Check access mode */ + + remain = fp->obj.objsize - fp->fptr; + if (btf > remain) btf = (UINT)remain; /* Truncate btf by remaining bytes */ + + for ( ; btf && (*func)(0, 0); /* Repeat until all data transferred or stream goes busy */ + fp->fptr += rcnt, *bf += rcnt, btf -= rcnt) { + csect = (UINT)(fp->fptr / SS(fs) & (fs->csize - 1)); /* Sector offset in the cluster */ + if (fp->fptr % SS(fs) == 0) { /* On the sector boundary? */ + if (csect == 0) { /* On the cluster boundary? */ + clst = (fp->fptr == 0) ? /* On the top of the file? */ + fp->obj.sclust : get_fat(&fp->obj, fp->clust); + if (clst <= 1) ABORT(fs, FR_INT_ERR); + if (clst == 0xFFFFFFFF) ABORT(fs, FR_DISK_ERR); + fp->clust = clst; /* Update current cluster */ + } + } + sect = clust2sect(fs, fp->clust); /* Get current data sector */ + if (!sect) ABORT(fs, FR_INT_ERR); + sect += csect; +#if _FS_TINY + if (move_window(fs, sect) != FR_OK) ABORT(fs, FR_DISK_ERR); /* Move sector window to the file data */ + dbuf = fs->win; +#else + if (fp->sect != sect) { /* Fill sector cache with file data */ +#if !_FS_READONLY + if (fp->flag & FA_DIRTY) { /* Write-back dirty sector cache */ + if (disk_write(fs->drv, fp->buf, fp->sect, 1) != RES_OK) ABORT(fs, FR_DISK_ERR); + fp->flag &= (BYTE)~FA_DIRTY; + } +#endif + if (disk_read(fs->drv, fp->buf, sect, 1) != RES_OK) ABORT(fs, FR_DISK_ERR); + } + dbuf = fp->buf; +#endif + fp->sect = sect; + rcnt = SS(fs) - (UINT)fp->fptr % SS(fs); /* Number of bytes left in the sector */ + if (rcnt > btf) rcnt = btf; /* Clip it by btr if needed */ + rcnt = (*func)(dbuf + ((UINT)fp->fptr % SS(fs)), rcnt); /* Forward the file data */ + if (!rcnt) ABORT(fs, FR_INT_ERR); + } + + LEAVE_FF(fs, FR_OK); +} +#endif /* _USE_FORWARD */ + + + +#if _USE_MKFS && !_FS_READONLY +/*-----------------------------------------------------------------------*/ +/* Create an FAT/exFAT volume */ +/*-----------------------------------------------------------------------*/ + +FRESULT f_mkfs ( + const TCHAR* path, /* Logical drive number */ + BYTE opt, /* Format option */ + DWORD au, /* Size of allocation unit (cluster) [byte] */ + void* work, /* Pointer to working buffer */ + UINT len /* Size of working buffer */ +) +{ + const UINT n_fats = 1; /* Number of FATs for FAT12/16/32 volume (1 or 2) */ + const UINT n_rootdir = 512; /* Number of root directory entries for FAT12/16 volume */ + static const WORD cst[] = {1, 4, 16, 64, 256, 512, 0}; /* Cluster size boundary for FAT12/16 volume (4Ks unit) */ + static const WORD cst32[] = {1, 2, 4, 8, 16, 32, 0}; /* Cluster size boundary for FAT32 volume (128Ks unit) */ + BYTE fmt, sys, *buf, *pte, pdrv, part; + WORD ss; + DWORD szb_buf, sz_buf, sz_blk, n_clst, pau, sect, nsect, n; + DWORD b_vol, b_fat, b_data; /* Base LBA for volume, fat, data */ + DWORD sz_vol, sz_rsv, sz_fat, sz_dir; /* Size for volume, fat, dir, data */ + UINT i; + int vol; + DSTATUS stat; +#if _USE_TRIM || _FS_EXFAT + DWORD tbl[3]; +#endif + + + /* Check mounted drive and clear work area */ + vol = get_ldnumber(&path); /* Get target logical drive */ + if (vol < 0) return FR_INVALID_DRIVE; + if (FatFs[vol]) FatFs[vol]->fs_type = 0; /* Clear the volume */ + pdrv = LD2PD(vol); /* Physical drive */ + part = LD2PT(vol); /* Partition (0:create as new, 1-4:get from partition table) */ + + /* Check physical drive status */ + stat = disk_initialize(pdrv); + if (stat & STA_NOINIT) return FR_NOT_READY; + if (stat & STA_PROTECT) return FR_WRITE_PROTECTED; + if (disk_ioctl(pdrv, GET_BLOCK_SIZE, &sz_blk) != RES_OK || !sz_blk || sz_blk > 32768 || (sz_blk & (sz_blk - 1))) sz_blk = 1; /* Erase block to align data area */ +#if _MAX_SS != _MIN_SS /* Get sector size of the medium if variable sector size cfg. */ + if (disk_ioctl(pdrv, GET_SECTOR_SIZE, &ss) != RES_OK) return FR_DISK_ERR; + if (ss > _MAX_SS || ss < _MIN_SS || (ss & (ss - 1))) return FR_DISK_ERR; +#else + ss = _MAX_SS; +#endif + if ((au != 0 && au < ss) || au > 0x1000000 || (au & (au - 1))) return FR_INVALID_PARAMETER; /* Check if au is valid */ + au /= ss; /* Cluster size in unit of sector */ + + /* Get working buffer */ + buf = (BYTE*)work; /* Working buffer */ + sz_buf = len / ss; /* Size of working buffer (sector) */ + szb_buf = sz_buf * ss; /* Size of working buffer (byte) */ + if (!szb_buf) return FR_MKFS_ABORTED; + + /* Determine where the volume to be located (b_vol, sz_vol) */ + if (_MULTI_PARTITION && part != 0) { + /* Get partition information from partition table in the MBR */ + if (disk_read(pdrv, buf, 0, 1) != RES_OK) return FR_DISK_ERR; /* Load MBR */ + if (ld_word(buf + BS_55AA) != 0xAA55) return FR_MKFS_ABORTED; /* Check if MBR is valid */ + pte = buf + (MBR_Table + (part - 1) * SZ_PTE); + if (!pte[PTE_System]) return FR_MKFS_ABORTED; /* No partition? */ + b_vol = ld_dword(pte + PTE_StLba); /* Get volume start sector */ + sz_vol = ld_dword(pte + PTE_SizLba); /* Get volume size */ + } else { + /* Create a single-partition in this function */ + if (disk_ioctl(pdrv, GET_SECTOR_COUNT, &sz_vol) != RES_OK) return FR_DISK_ERR; + b_vol = (opt & FM_SFD) ? 0 : 63; /* Volume start sector */ + if (sz_vol < b_vol) return FR_MKFS_ABORTED; + sz_vol -= b_vol; /* Volume size */ + } + if (sz_vol < 128) return FR_MKFS_ABORTED; /* Check if volume size is >=128s */ + + /* Pre-determine the FAT type */ + do { + if (_FS_EXFAT && (opt & FM_EXFAT)) { /* exFAT possible? */ + if ((opt & FM_ANY) == FM_EXFAT || sz_vol >= 0x4000000 || au > 128) { /* exFAT only, vol >= 64Ms or au > 128s ? */ + fmt = FS_EXFAT; break; + } + } + if (au > 128) return FR_INVALID_PARAMETER; /* Too large au for FAT/FAT32 */ + if (opt & FM_FAT32) { /* FAT32 possible? */ + if ((opt & FM_ANY) == FM_FAT32 || !(opt & FM_FAT)) { /* FAT32 only or no-FAT? */ + fmt = FS_FAT32; break; + } + } + if (!(opt & FM_FAT)) return FR_INVALID_PARAMETER; /* no-FAT? */ + fmt = FS_FAT16; + } while (0); + +#if _FS_EXFAT + if (fmt == FS_EXFAT) { /* Create an exFAT volume */ + DWORD szb_bit, szb_case, sum, nb, cl; + WCHAR ch, si; + UINT j, st; + BYTE b; + + if (sz_vol < 0x1000) return FR_MKFS_ABORTED; /* Too small volume? */ +#if _USE_TRIM + tbl[0] = b_vol; tbl[1] = b_vol + sz_vol - 1; /* Inform the device the volume area may be erased */ + disk_ioctl(pdrv, CTRL_TRIM, tbl); +#endif + /* Determine FAT location, data location and number of clusters */ + if (!au) { /* au auto-selection */ + au = 8; + if (sz_vol >= 0x80000) au = 64; /* >= 512Ks */ + if (sz_vol >= 0x4000000) au = 256; /* >= 64Ms */ + } + b_fat = b_vol + 32; /* FAT start at offset 32 */ + sz_fat = ((sz_vol / au + 2) * 4 + ss - 1) / ss; /* Number of FAT sectors */ + b_data = (b_fat + sz_fat + sz_blk - 1) & ~(sz_blk - 1); /* Align data area to the erase block boundary */ + if (b_data >= sz_vol / 2) return FR_MKFS_ABORTED; /* Too small volume? */ + n_clst = (sz_vol - (b_data - b_vol)) / au; /* Number of clusters */ + if (n_clst <16) return FR_MKFS_ABORTED; /* Too few clusters? */ + if (n_clst > MAX_EXFAT) return FR_MKFS_ABORTED; /* Too many clusters? */ + + szb_bit = (n_clst + 7) / 8; /* Size of allocation bitmap */ + tbl[0] = (szb_bit + au * ss - 1) / (au * ss); /* Number of allocation bitmap clusters */ + + /* Create a compressed up-case table */ + sect = b_data + au * tbl[0]; /* Table start sector */ + sum = 0; /* Table checksum to be stored in the 82 entry */ + st = si = i = j = szb_case = 0; + do { + switch (st) { + case 0: + ch = ff_wtoupper(si); /* Get an up-case char */ + if (ch != si) { + si++; break; /* Store the up-case char if exist */ + } + for (j = 1; (WCHAR)(si + j) && (WCHAR)(si + j) == ff_wtoupper((WCHAR)(si + j)); j++) ; /* Get run length of no-case block */ + if (j >= 128) { + ch = 0xFFFF; st = 2; break; /* Compress the no-case block if run is >= 128 */ + } + st = 1; /* Do not compress short run */ + /* go to next case */ + case 1: + ch = si++; /* Fill the short run */ + if (--j == 0) st = 0; + break; + + default: + ch = (WCHAR)j; si += j; /* Number of chars to skip */ + st = 0; + } + sum = xsum32(buf[i + 0] = (BYTE)ch, sum); /* Put it into the write buffer */ + sum = xsum32(buf[i + 1] = (BYTE)(ch >> 8), sum); + i += 2; szb_case += 2; + if (!si || i == szb_buf) { /* Write buffered data when buffer full or end of process */ + n = (i + ss - 1) / ss; + if (disk_write(pdrv, buf, sect, n) != RES_OK) return FR_DISK_ERR; + sect += n; i = 0; + } + } while (si); + tbl[1] = (szb_case + au * ss - 1) / (au * ss); /* Number of up-case table clusters */ + tbl[2] = 1; /* Number of root dir clusters */ + + /* Initialize the allocation bitmap */ + sect = b_data; nsect = (szb_bit + ss - 1) / ss; /* Start of bitmap and number of sectors */ + nb = tbl[0] + tbl[1] + tbl[2]; /* Number of clusters in-use by system */ + do { + mem_set(buf, 0, szb_buf); + for (i = 0; nb >= 8 && i < szb_buf; buf[i++] = 0xFF, nb -= 8) ; + for (b = 1; nb && i < szb_buf; buf[i] |= b, b <<= 1, nb--) ; + n = (nsect > sz_buf) ? sz_buf : nsect; /* Write the buffered data */ + if (disk_write(pdrv, buf, sect, n) != RES_OK) return FR_DISK_ERR; + sect += n; nsect -= n; + } while (nsect); + + /* Initialize the FAT */ + sect = b_fat; nsect = sz_fat; /* Start of FAT and number of FAT sectors */ + j = nb = cl = 0; + do { + mem_set(buf, 0, szb_buf); i = 0; /* Clear work area and reset write index */ + if (cl == 0) { /* Set entry 0 and 1 */ + st_dword(buf + i, 0xFFFFFFF8); i += 4; cl++; + st_dword(buf + i, 0xFFFFFFFF); i += 4; cl++; + } + do { /* Create chains of bitmap, up-case and root dir */ + while (nb && i < szb_buf) { /* Create a chain */ + st_dword(buf + i, (nb > 1) ? cl + 1 : 0xFFFFFFFF); + i += 4; cl++; nb--; + } + if (!nb && j < 3) nb = tbl[j++]; /* Next chain */ + } while (nb && i < szb_buf); + n = (nsect > sz_buf) ? sz_buf : nsect; /* Write the buffered data */ + if (disk_write(pdrv, buf, sect, n) != RES_OK) return FR_DISK_ERR; + sect += n; nsect -= n; + } while (nsect); + + /* Initialize the root directory */ + mem_set(buf, 0, szb_buf); + buf[SZDIRE * 0 + 0] = 0x83; /* 83 entry (volume label) */ + buf[SZDIRE * 1 + 0] = 0x81; /* 81 entry (allocation bitmap) */ + st_dword(buf + SZDIRE * 1 + 20, 2); + st_dword(buf + SZDIRE * 1 + 24, szb_bit); + buf[SZDIRE * 2 + 0] = 0x82; /* 82 entry (up-case table) */ + st_dword(buf + SZDIRE * 2 + 4, sum); + st_dword(buf + SZDIRE * 2 + 20, 2 + tbl[0]); + st_dword(buf + SZDIRE * 2 + 24, szb_case); + sect = b_data + au * (tbl[0] + tbl[1]); nsect = au; /* Start of the root directory and number of sectors */ + do { /* Fill root directory sectors */ + n = (nsect > sz_buf) ? sz_buf : nsect; + if (disk_write(pdrv, buf, sect, n) != RES_OK) return FR_DISK_ERR; + mem_set(buf, 0, ss); + sect += n; nsect -= n; + } while (nsect); + + /* Create two set of the exFAT VBR blocks */ + sect = b_vol; + for (n = 0; n < 2; n++) { + /* Main record (+0) */ + mem_set(buf, 0, ss); + mem_cpy(buf + BS_JmpBoot, "\xEB\x76\x90" "EXFAT ", 11); /* Boot jump code (x86), OEM name */ + st_dword(buf + BPB_VolOfsEx, b_vol); /* Volume offset in the physical drive [sector] */ + st_dword(buf + BPB_TotSecEx, sz_vol); /* Volume size [sector] */ + st_dword(buf + BPB_FatOfsEx, b_fat - b_vol); /* FAT offset [sector] */ + st_dword(buf + BPB_FatSzEx, sz_fat); /* FAT size [sector] */ + st_dword(buf + BPB_DataOfsEx, b_data - b_vol); /* Data offset [sector] */ + st_dword(buf + BPB_NumClusEx, n_clst); /* Number of clusters */ + st_dword(buf + BPB_RootClusEx, 2 + tbl[0] + tbl[1]); /* Root dir cluster # */ + st_dword(buf + BPB_VolIDEx, GET_FATTIME()); /* VSN */ + st_word(buf + BPB_FSVerEx, 0x100); /* File system version (1.00) */ + for (buf[BPB_BytsPerSecEx] = 0, i = ss; i >>= 1; buf[BPB_BytsPerSecEx]++) ; /* Log2 of sector size [byte] */ + for (buf[BPB_SecPerClusEx] = 0, i = au; i >>= 1; buf[BPB_SecPerClusEx]++) ; /* Log2 of cluster size [sector] */ + buf[BPB_NumFATsEx] = 1; /* Number of FATs */ + buf[BPB_DrvNumEx] = 0x80; /* Drive number (for int13) */ + st_word(buf + BS_BootCodeEx, 0xFEEB); /* Boot code (x86) */ + st_word(buf + BS_55AA, 0xAA55); /* Signature (placed here regardless of sector size) */ + for (i = sum = 0; i < ss; i++) { /* VBR checksum */ + if (i != BPB_VolFlagEx && i != BPB_VolFlagEx + 1 && i != BPB_PercInUseEx) sum = xsum32(buf[i], sum); + } + if (disk_write(pdrv, buf, sect++, 1) != RES_OK) return FR_DISK_ERR; + /* Extended bootstrap record (+1..+8) */ + mem_set(buf, 0, ss); + st_word(buf + ss - 2, 0xAA55); /* Signature (placed at end of sector) */ + for (j = 1; j < 9; j++) { + for (i = 0; i < ss; sum = xsum32(buf[i++], sum)) ; /* VBR checksum */ + if (disk_write(pdrv, buf, sect++, 1) != RES_OK) return FR_DISK_ERR; + } + /* OEM/Reserved record (+9..+10) */ + mem_set(buf, 0, ss); + for ( ; j < 11; j++) { + for (i = 0; i < ss; sum = xsum32(buf[i++], sum)) ; /* VBR checksum */ + if (disk_write(pdrv, buf, sect++, 1) != RES_OK) return FR_DISK_ERR; + } + /* Sum record (+11) */ + for (i = 0; i < ss; i += 4) st_dword(buf + i, sum); /* Fill with checksum value */ + if (disk_write(pdrv, buf, sect++, 1) != RES_OK) return FR_DISK_ERR; + } + + } else +#endif /* _FS_EXFAT */ + { /* Create an FAT12/16/32 volume */ + do { + pau = au; + /* Pre-determine number of clusters and FAT sub-type */ + if (fmt == FS_FAT32) { /* FAT32 volume */ + if (!pau) { /* au auto-selection */ + n = sz_vol / 0x20000; /* Volume size in unit of 128KS */ + for (i = 0, pau = 1; cst32[i] && cst32[i] <= n; i++, pau <<= 1) ; /* Get from table */ + } + n_clst = sz_vol / pau; /* Number of clusters */ + sz_fat = (n_clst * 4 + 8 + ss - 1) / ss; /* FAT size [sector] */ + sz_rsv = 32; /* Number of reserved sectors */ + sz_dir = 0; /* No static directory */ + if (n_clst <= MAX_FAT16 || n_clst > MAX_FAT32) return FR_MKFS_ABORTED; + } else { /* FAT12/16 volume */ + if (!pau) { /* au auto-selection */ + n = sz_vol / 0x1000; /* Volume size in unit of 4KS */ + for (i = 0, pau = 1; cst[i] && cst[i] <= n; i++, pau <<= 1) ; /* Get from table */ + } + n_clst = sz_vol / pau; + if (n_clst > MAX_FAT12) { + n = n_clst * 2 + 4; /* FAT size [byte] */ + } else { + fmt = FS_FAT12; + n = (n_clst * 3 + 1) / 2 + 3; /* FAT size [byte] */ + } + sz_fat = (n + ss - 1) / ss; /* FAT size [sector] */ + sz_rsv = 1; /* Number of reserved sectors */ + sz_dir = (DWORD)n_rootdir * SZDIRE / ss; /* Rootdir size [sector] */ + } + b_fat = b_vol + sz_rsv; /* FAT base */ + b_data = b_fat + sz_fat * n_fats + sz_dir; /* Data base */ + + /* Align data base to erase block boundary (for flash memory media) */ + n = ((b_data + sz_blk - 1) & ~(sz_blk - 1)) - b_data; /* Next nearest erase block from current data base */ + if (fmt == FS_FAT32) { /* FAT32: Move FAT base */ + sz_rsv += n; b_fat += n; + } else { /* FAT12/16: Expand FAT size */ + sz_fat += n / n_fats; + } + + /* Determine number of clusters and final check of validity of the FAT sub-type */ + if (sz_vol < b_data + pau * 16 - b_vol) return FR_MKFS_ABORTED; /* Too small volume */ + n_clst = (sz_vol - sz_rsv - sz_fat * n_fats - sz_dir) / pau; + if (fmt == FS_FAT32) { + if (n_clst <= MAX_FAT16) { /* Too few clusters for FAT32 */ + if (!au && (au = pau / 2) != 0) continue; /* Adjust cluster size and retry */ + return FR_MKFS_ABORTED; + } + } + if (fmt == FS_FAT16) { + if (n_clst > MAX_FAT16) { /* Too many clusters for FAT16 */ + if (!au && (pau * 2) <= 64) { + au = pau * 2; continue; /* Adjust cluster size and retry */ + } + if ((opt & FM_FAT32)) { + fmt = FS_FAT32; continue; /* Switch type to FAT32 and retry */ + } + if (!au && (au = pau * 2) <= 128) continue; /* Adjust cluster size and retry */ + return FR_MKFS_ABORTED; + } + if (n_clst <= MAX_FAT12) { /* Too few clusters for FAT16 */ + if (!au && (au = pau * 2) <= 128) continue; /* Adjust cluster size and retry */ + return FR_MKFS_ABORTED; + } + } + if (fmt == FS_FAT12 && n_clst > MAX_FAT12) return FR_MKFS_ABORTED; /* Too many clusters for FAT12 */ + + /* Ok, it is the valid cluster configuration */ + break; + } while (1); + +#if _USE_TRIM + tbl[0] = b_vol; tbl[1] = b_vol + sz_vol - 1; /* Inform the device the volume area can be erased */ + disk_ioctl(pdrv, CTRL_TRIM, tbl); +#endif + /* Create FAT VBR */ + mem_set(buf, 0, ss); + mem_cpy(buf + BS_JmpBoot, "\xEB\xFE\x90" "MSDOS5.0", 11);/* Boot jump code (x86), OEM name */ + st_word(buf + BPB_BytsPerSec, ss); /* Sector size [byte] */ + buf[BPB_SecPerClus] = (BYTE)pau; /* Cluster size [sector] */ + st_word(buf + BPB_RsvdSecCnt, (WORD)sz_rsv); /* Size of reserved area */ + buf[BPB_NumFATs] = (BYTE)n_fats; /* Number of FATs */ + st_word(buf + BPB_RootEntCnt, (WORD)((fmt == FS_FAT32) ? 0 : n_rootdir)); /* Number of root directory entries */ + if (sz_vol < 0x10000) { + st_word(buf + BPB_TotSec16, (WORD)sz_vol); /* Volume size in 16-bit LBA */ + } else { + st_dword(buf + BPB_TotSec32, sz_vol); /* Volume size in 32-bit LBA */ + } + buf[BPB_Media] = 0xF8; /* Media descriptor byte */ + st_word(buf + BPB_SecPerTrk, 63); /* Number of sectors per track (for int13) */ + st_word(buf + BPB_NumHeads, 255); /* Number of heads (for int13) */ + st_dword(buf + BPB_HiddSec, b_vol); /* Volume offset in the physical drive [sector] */ + if (fmt == FS_FAT32) { + st_dword(buf + BS_VolID32, GET_FATTIME()); /* VSN */ + st_dword(buf + BPB_FATSz32, sz_fat); /* FAT size [sector] */ + st_dword(buf + BPB_RootClus32, 2); /* Root directory cluster # (2) */ + st_word(buf + BPB_FSInfo32, 1); /* Offset of FSINFO sector (VBR + 1) */ + st_word(buf + BPB_BkBootSec32, 6); /* Offset of backup VBR (VBR + 6) */ + buf[BS_DrvNum32] = 0x80; /* Drive number (for int13) */ + buf[BS_BootSig32] = 0x29; /* Extended boot signature */ + mem_cpy(buf + BS_VolLab32, "NO NAME " "FAT32 ", 19); /* Volume label, FAT signature */ + } else { + st_dword(buf + BS_VolID, GET_FATTIME()); /* VSN */ + st_word(buf + BPB_FATSz16, (WORD)sz_fat); /* FAT size [sector] */ + buf[BS_DrvNum] = 0x80; /* Drive number (for int13) */ + buf[BS_BootSig] = 0x29; /* Extended boot signature */ + mem_cpy(buf + BS_VolLab, "NO NAME " "FAT ", 19); /* Volume label, FAT signature */ + } + st_word(buf + BS_55AA, 0xAA55); /* Signature (offset is fixed here regardless of sector size) */ + if (disk_write(pdrv, buf, b_vol, 1) != RES_OK) return FR_DISK_ERR; /* Write it to the VBR sector */ + + /* Create FSINFO record if needed */ + if (fmt == FS_FAT32) { + disk_write(pdrv, buf, b_vol + 6, 1); /* Write backup VBR (VBR + 6) */ + mem_set(buf, 0, ss); + st_dword(buf + FSI_LeadSig, 0x41615252); + st_dword(buf + FSI_StrucSig, 0x61417272); + st_dword(buf + FSI_Free_Count, n_clst - 1); /* Number of free clusters */ + st_dword(buf + FSI_Nxt_Free, 2); /* Last allocated cluster# */ + st_word(buf + BS_55AA, 0xAA55); + disk_write(pdrv, buf, b_vol + 7, 1); /* Write backup FSINFO (VBR + 7) */ + disk_write(pdrv, buf, b_vol + 1, 1); /* Write original FSINFO (VBR + 1) */ + } + + /* Initialize FAT area */ + mem_set(buf, 0, (UINT)szb_buf); + sect = b_fat; /* FAT start sector */ + for (i = 0; i < n_fats; i++) { /* Initialize FATs each */ + if (fmt == FS_FAT32) { + st_dword(buf + 0, 0xFFFFFFF8); /* Entry 0 */ + st_dword(buf + 4, 0xFFFFFFFF); /* Entry 1 */ + st_dword(buf + 8, 0x0FFFFFFF); /* Entry 2 (root directory) */ + } else { + st_dword(buf + 0, (fmt == FS_FAT12) ? 0xFFFFF8 : 0xFFFFFFF8); /* Entry 0 and 1 */ + } + nsect = sz_fat; /* Number of FAT sectors */ + do { /* Fill FAT sectors */ + n = (nsect > sz_buf) ? sz_buf : nsect; + if (disk_write(pdrv, buf, sect, (UINT)n) != RES_OK) return FR_DISK_ERR; + mem_set(buf, 0, ss); + sect += n; nsect -= n; + } while (nsect); + } + + /* Initialize root directory (fill with zero) */ + nsect = (fmt == FS_FAT32) ? pau : sz_dir; /* Number of root directory sectors */ + do { + n = (nsect > sz_buf) ? sz_buf : nsect; + if (disk_write(pdrv, buf, sect, (UINT)n) != RES_OK) return FR_DISK_ERR; + sect += n; nsect -= n; + } while (nsect); + } + + /* Determine system ID in the partition table */ + if (_FS_EXFAT && fmt == FS_EXFAT) { + sys = 0x07; /* HPFS/NTFS/exFAT */ + } else { + if (fmt == FS_FAT32) { + sys = 0x0C; /* FAT32X */ + } else { + if (sz_vol >= 0x10000) { + sys = 0x06; /* FAT12/16 (>=64KS) */ + } else { + sys = (fmt == FS_FAT16) ? 0x04 : 0x01; /* FAT16 (<64KS) : FAT12 (<64KS) */ + } + } + } + + /* Update partition information */ + if (_MULTI_PARTITION && part != 0) { /* Created in the existing partition */ + /* Update system ID in the partition table */ + if (disk_read(pdrv, buf, 0, 1) != RES_OK) return FR_DISK_ERR; /* Read the MBR */ + buf[MBR_Table + (part - 1) * SZ_PTE + PTE_System] = sys; /* Set system ID */ + if (disk_write(pdrv, buf, 0, 1) != RES_OK) return FR_DISK_ERR; /* Write it back to the MBR */ + } else { /* Created as a new single partition */ + if (!(opt & FM_SFD)) { /* Create partition table if in FDISK format */ + mem_set(buf, 0, ss); + st_word(buf + BS_55AA, 0xAA55); /* MBR signature */ + pte = buf + MBR_Table; /* Create partition table for single partition in the drive */ + pte[PTE_Boot] = 0; /* Boot indicator */ + pte[PTE_StHead] = 1; /* Start head */ + pte[PTE_StSec] = 1; /* Start sector */ + pte[PTE_StCyl] = 0; /* Start cylinder */ + pte[PTE_System] = sys; /* System type */ + n = (b_vol + sz_vol) / (63 * 255); /* (End CHS may be invalid) */ + pte[PTE_EdHead] = 254; /* End head */ + pte[PTE_EdSec] = (BYTE)(n >> 2 | 63); /* End sector */ + pte[PTE_EdCyl] = (BYTE)n; /* End cylinder */ + st_dword(pte + PTE_StLba, b_vol); /* Start offset in LBA */ + st_dword(pte + PTE_SizLba, sz_vol); /* Size in sectors */ + if (disk_write(pdrv, buf, 0, 1) != RES_OK) return FR_DISK_ERR; /* Write it to the MBR */ + } + } + + if (disk_ioctl(pdrv, CTRL_SYNC, 0) != RES_OK) return FR_DISK_ERR; + + return FR_OK; +} + + + +#if _MULTI_PARTITION +/*-----------------------------------------------------------------------*/ +/* Create partition table on the physical drive */ +/*-----------------------------------------------------------------------*/ + +FRESULT f_fdisk ( + BYTE pdrv, /* Physical drive number */ + const DWORD* szt, /* Pointer to the size table for each partitions */ + void* work /* Pointer to the working buffer */ +) +{ + UINT i, n, sz_cyl, tot_cyl, b_cyl, e_cyl, p_cyl; + BYTE s_hd, e_hd, *p, *buf = (BYTE*)work; + DSTATUS stat; + DWORD sz_disk, sz_part, s_part; + + + stat = disk_initialize(pdrv); + if (stat & STA_NOINIT) return FR_NOT_READY; + if (stat & STA_PROTECT) return FR_WRITE_PROTECTED; + if (disk_ioctl(pdrv, GET_SECTOR_COUNT, &sz_disk)) return FR_DISK_ERR; + + /* Determine the CHS without any consideration of the drive geometry */ + for (n = 16; n < 256 && sz_disk / n / 63 > 1024; n *= 2) ; + if (n == 256) n--; + e_hd = n - 1; + sz_cyl = 63 * n; + tot_cyl = sz_disk / sz_cyl; + + /* Create partition table */ + mem_set(buf, 0, _MAX_SS); + p = buf + MBR_Table; b_cyl = 0; + for (i = 0; i < 4; i++, p += SZ_PTE) { + p_cyl = (szt[i] <= 100U) ? (DWORD)tot_cyl * szt[i] / 100 : szt[i] / sz_cyl; /* Number of cylinders */ + if (!p_cyl) continue; + s_part = (DWORD)sz_cyl * b_cyl; + sz_part = (DWORD)sz_cyl * p_cyl; + if (i == 0) { /* Exclude first track of cylinder 0 */ + s_hd = 1; + s_part += 63; sz_part -= 63; + } else { + s_hd = 0; + } + e_cyl = b_cyl + p_cyl - 1; /* End cylinder */ + if (e_cyl >= tot_cyl) return FR_INVALID_PARAMETER; + + /* Set partition table */ + p[1] = s_hd; /* Start head */ + p[2] = (BYTE)((b_cyl >> 2) + 1); /* Start sector */ + p[3] = (BYTE)b_cyl; /* Start cylinder */ + p[4] = 0x07; /* System type (temporary setting) */ + p[5] = e_hd; /* End head */ + p[6] = (BYTE)((e_cyl >> 2) + 63); /* End sector */ + p[7] = (BYTE)e_cyl; /* End cylinder */ + st_dword(p + 8, s_part); /* Start sector in LBA */ + st_dword(p + 12, sz_part); /* Number of sectors */ + + /* Next partition */ + b_cyl += p_cyl; + } + st_word(p, 0xAA55); + + /* Write it to the MBR */ + return (disk_write(pdrv, buf, 0, 1) != RES_OK || disk_ioctl(pdrv, CTRL_SYNC, 0) != RES_OK) ? FR_DISK_ERR : FR_OK; +} + +#endif /* _MULTI_PARTITION */ +#endif /* _USE_MKFS && !_FS_READONLY */ + + + + +#if _USE_STRFUNC +/*-----------------------------------------------------------------------*/ +/* Get a string from the file */ +/*-----------------------------------------------------------------------*/ + +TCHAR* f_gets ( + TCHAR* buff, /* Pointer to the string buffer to read */ + int len, /* Size of string buffer (characters) */ + FIL* fp /* Pointer to the file object */ +) +{ + int n = 0; + TCHAR c, *p = buff; + BYTE s[2]; + UINT rc; + + + while (n < len - 1) { /* Read characters until buffer gets filled */ +#if _LFN_UNICODE +#if _STRF_ENCODE == 3 /* Read a character in UTF-8 */ + f_read(fp, s, 1, &rc); + if (rc != 1) break; + c = s[0]; + if (c >= 0x80) { + if (c < 0xC0) continue; /* Skip stray trailer */ + if (c < 0xE0) { /* Two-byte sequence (0x80-0x7FF) */ + f_read(fp, s, 1, &rc); + if (rc != 1) break; + c = (c & 0x1F) << 6 | (s[0] & 0x3F); + if (c < 0x80) c = '?'; /* Reject invalid code range */ + } else { + if (c < 0xF0) { /* Three-byte sequence (0x800-0xFFFF) */ + f_read(fp, s, 2, &rc); + if (rc != 2) break; + c = c << 12 | (s[0] & 0x3F) << 6 | (s[1] & 0x3F); + if (c < 0x800) c = '?'; /* Reject invalid code range */ + } else { /* Reject four-byte sequence */ + c = '?'; + } + } + } +#elif _STRF_ENCODE == 2 /* Read a character in UTF-16BE */ + f_read(fp, s, 2, &rc); + if (rc != 2) break; + c = s[1] + (s[0] << 8); +#elif _STRF_ENCODE == 1 /* Read a character in UTF-16LE */ + f_read(fp, s, 2, &rc); + if (rc != 2) break; + c = s[0] + (s[1] << 8); +#else /* Read a character in ANSI/OEM */ + f_read(fp, s, 1, &rc); + if (rc != 1) break; + c = s[0]; + if (IsDBCS1(c)) { + f_read(fp, s, 1, &rc); + if (rc != 1) break; + c = (c << 8) + s[0]; + } + c = ff_convert(c, 1); /* OEM -> Unicode */ + if (!c) c = '?'; +#endif +#else /* Read a character without conversion */ + f_read(fp, s, 1, &rc); + if (rc != 1) break; + c = s[0]; +#endif + if (_USE_STRFUNC == 2 && c == '\r') continue; /* Strip '\r' */ + *p++ = c; + n++; + if (c == '\n') break; /* Break on EOL */ + } + *p = 0; + return n ? buff : 0; /* When no data read (eof or error), return with error. */ +} + + + + +#if !_FS_READONLY +#include +/*-----------------------------------------------------------------------*/ +/* Put a character to the file */ +/*-----------------------------------------------------------------------*/ + +typedef struct { + FIL *fp; /* Ptr to the writing file */ + int idx, nchr; /* Write index of buf[] (-1:error), number of chars written */ + BYTE buf[64]; /* Write buffer */ +} putbuff; + + +static +void putc_bfd ( /* Buffered write with code conversion */ + putbuff* pb, + TCHAR c +) +{ + UINT bw; + int i; + + + if (_USE_STRFUNC == 2 && c == '\n') { /* LF -> CRLF conversion */ + putc_bfd(pb, '\r'); + } + + i = pb->idx; /* Write index of pb->buf[] */ + if (i < 0) return; + +#if _LFN_UNICODE +#if _STRF_ENCODE == 3 /* Write a character in UTF-8 */ + if (c < 0x80) { /* 7-bit */ + pb->buf[i++] = (BYTE)c; + } else { + if (c < 0x800) { /* 11-bit */ + pb->buf[i++] = (BYTE)(0xC0 | c >> 6); + } else { /* 16-bit */ + pb->buf[i++] = (BYTE)(0xE0 | c >> 12); + pb->buf[i++] = (BYTE)(0x80 | (c >> 6 & 0x3F)); + } + pb->buf[i++] = (BYTE)(0x80 | (c & 0x3F)); + } +#elif _STRF_ENCODE == 2 /* Write a character in UTF-16BE */ + pb->buf[i++] = (BYTE)(c >> 8); + pb->buf[i++] = (BYTE)c; +#elif _STRF_ENCODE == 1 /* Write a character in UTF-16LE */ + pb->buf[i++] = (BYTE)c; + pb->buf[i++] = (BYTE)(c >> 8); +#else /* Write a character in ANSI/OEM */ + c = ff_convert(c, 0); /* Unicode -> OEM */ + if (!c) c = '?'; + if (c >= 0x100) + pb->buf[i++] = (BYTE)(c >> 8); + pb->buf[i++] = (BYTE)c; +#endif +#else /* Write a character without conversion */ + pb->buf[i++] = (BYTE)c; +#endif + + if (i >= (int)(sizeof pb->buf) - 3) { /* Write buffered characters to the file */ + f_write(pb->fp, pb->buf, (UINT)i, &bw); + i = (bw == (UINT)i) ? 0 : -1; + } + pb->idx = i; + pb->nchr++; +} + + +static +int putc_flush ( /* Flush left characters in the buffer */ + putbuff* pb +) +{ + UINT nw; + + if ( pb->idx >= 0 /* Flush buffered characters to the file */ + && f_write(pb->fp, pb->buf, (UINT)pb->idx, &nw) == FR_OK + && (UINT)pb->idx == nw) return pb->nchr; + return EOF; +} + + +static +void putc_init ( /* Initialize write buffer */ + putbuff* pb, + FIL* fp +) +{ + pb->fp = fp; + pb->nchr = pb->idx = 0; +} + + + +int f_putc ( + TCHAR c, /* A character to be output */ + FIL* fp /* Pointer to the file object */ +) +{ + putbuff pb; + + + putc_init(&pb, fp); + putc_bfd(&pb, c); /* Put the character */ + return putc_flush(&pb); +} + + + + +/*-----------------------------------------------------------------------*/ +/* Put a string to the file */ +/*-----------------------------------------------------------------------*/ + +int f_puts ( + const TCHAR* str, /* Pointer to the string to be output */ + FIL* fp /* Pointer to the file object */ +) +{ + putbuff pb; + + + putc_init(&pb, fp); + while (*str) putc_bfd(&pb, *str++); /* Put the string */ + return putc_flush(&pb); +} + + + + +/*-----------------------------------------------------------------------*/ +/* Put a formatted string to the file */ +/*-----------------------------------------------------------------------*/ + +int f_printf ( + FIL* fp, /* Pointer to the file object */ + const TCHAR* fmt, /* Pointer to the format string */ + ... /* Optional arguments... */ +) +{ + va_list arp; + putbuff pb; + BYTE f, r; + UINT i, j, w; + DWORD v; + TCHAR c, d, str[32], *p; + + + putc_init(&pb, fp); + + va_start(arp, fmt); + + for (;;) { + c = *fmt++; + if (c == 0) break; /* End of string */ + if (c != '%') { /* Non escape character */ + putc_bfd(&pb, c); + continue; + } + w = f = 0; + c = *fmt++; + if (c == '0') { /* Flag: '0' padding */ + f = 1; c = *fmt++; + } else { + if (c == '-') { /* Flag: left justified */ + f = 2; c = *fmt++; + } + } + while (IsDigit(c)) { /* Precision */ + w = w * 10 + c - '0'; + c = *fmt++; + } + if (c == 'l' || c == 'L') { /* Prefix: Size is long int */ + f |= 4; c = *fmt++; + } + if (!c) break; + d = c; + if (IsLower(d)) d -= 0x20; + switch (d) { /* Type is... */ + case 'S' : /* String */ + p = va_arg(arp, TCHAR*); + for (j = 0; p[j]; j++) ; + if (!(f & 2)) { + while (j++ < w) putc_bfd(&pb, ' '); + } + while (*p) putc_bfd(&pb, *p++); + while (j++ < w) putc_bfd(&pb, ' '); + continue; + + case 'C' : /* Character */ + putc_bfd(&pb, (TCHAR)va_arg(arp, int)); continue; + + case 'B' : /* Binary */ + r = 2; break; + + case 'O' : /* Octal */ + r = 8; break; + + case 'D' : /* Signed decimal */ + case 'U' : /* Unsigned decimal */ + r = 10; break; + + case 'X' : /* Hexdecimal */ + r = 16; break; + + default: /* Unknown type (pass-through) */ + putc_bfd(&pb, c); continue; + } + + /* Get an argument and put it in numeral */ + v = (f & 4) ? (DWORD)va_arg(arp, long) : ((d == 'D') ? (DWORD)(long)va_arg(arp, int) : (DWORD)va_arg(arp, unsigned int)); + if (d == 'D' && (v & 0x80000000)) { + v = 0 - v; + f |= 8; + } + i = 0; + do { + d = (TCHAR)(v % r); v /= r; + if (d > 9) d += (c == 'x') ? 0x27 : 0x07; + str[i++] = d + '0'; + } while (v && i < sizeof str / sizeof str[0]); + if (f & 8) str[i++] = '-'; + j = i; d = (f & 1) ? '0' : ' '; + while (!(f & 2) && j++ < w) putc_bfd(&pb, d); + do { + putc_bfd(&pb, str[--i]); + } while (i); + while (j++ < w) putc_bfd(&pb, d); + } + + va_end(arp); + + return putc_flush(&pb); +} + +#endif /* !_FS_READONLY */ +#endif /* _USE_STRFUNC */ diff --git a/Middlewares/Third_Party/FatFs/src/ff.h b/Middlewares/Third_Party/FatFs/src/ff.h new file mode 100644 index 0000000..a233e16 --- /dev/null +++ b/Middlewares/Third_Party/FatFs/src/ff.h @@ -0,0 +1,361 @@ +/*----------------------------------------------------------------------------/ +/ FatFs - Generic FAT file system module R0.12c / +/-----------------------------------------------------------------------------/ +/ +/ Copyright (C) 2017, ChaN, all right reserved. +/ +/ FatFs module is an open source software. Redistribution and use of FatFs in +/ source and binary forms, with or without modification, are permitted provided +/ that the following condition is met: + +/ 1. Redistributions of source code must retain the above copyright notice, +/ this condition and the following disclaimer. +/ +/ This software is provided by the copyright holder and contributors "AS IS" +/ and any warranties related to this software are DISCLAIMED. +/ The copyright owner or contributors be NOT LIABLE for any damages caused +/ by use of this software. +/----------------------------------------------------------------------------*/ + + +#ifndef _FATFS +#define _FATFS 68300 /* Revision ID */ + +#ifdef __cplusplus +extern "C" { +#endif + +#include "integer.h" /* Basic integer types */ +#include "ffconf.h" /* FatFs configuration options */ + +#if _FATFS != _FFCONF +#error Wrong configuration file (ffconf.h). +#endif + + + +/* Definitions of volume management */ + +#if _MULTI_PARTITION /* Multiple partition configuration */ +typedef struct { + BYTE pd; /* Physical drive number */ + BYTE pt; /* Partition: 0:Auto detect, 1-4:Forced partition) */ +} PARTITION; +extern PARTITION VolToPart[]; /* Volume - Partition resolution table */ +#endif + + + +/* Type of path name strings on FatFs API */ + +#if _LFN_UNICODE /* Unicode (UTF-16) string */ +#if _USE_LFN == 0 +#error _LFN_UNICODE must be 0 at non-LFN cfg. +#endif +#ifndef _INC_TCHAR +typedef WCHAR TCHAR; +#define _T(x) L ## x +#define _TEXT(x) L ## x +#endif +#else /* ANSI/OEM string */ +#ifndef _INC_TCHAR +typedef char TCHAR; +#define _T(x) x +#define _TEXT(x) x +#endif +#endif + + + +/* Type of file size variables */ + +#if _FS_EXFAT +#if _USE_LFN == 0 +#error LFN must be enabled when enable exFAT +#endif +typedef QWORD FSIZE_t; +#else +typedef DWORD FSIZE_t; +#endif + + + +/* File system object structure (FATFS) */ + +typedef struct { + BYTE fs_type; /* File system type (0:N/A) */ + BYTE drv; /* Physical drive number */ + BYTE n_fats; /* Number of FATs (1 or 2) */ + BYTE wflag; /* win[] flag (b0:dirty) */ + BYTE fsi_flag; /* FSINFO flags (b7:disabled, b0:dirty) */ + WORD id; /* File system mount ID */ + WORD n_rootdir; /* Number of root directory entries (FAT12/16) */ + WORD csize; /* Cluster size [sectors] */ +#if _MAX_SS != _MIN_SS + WORD ssize; /* Sector size (512, 1024, 2048 or 4096) */ +#endif +#if _USE_LFN != 0 + WCHAR* lfnbuf; /* LFN working buffer */ +#endif +#if _FS_EXFAT + BYTE* dirbuf; /* Directory entry block scratchpad buffer */ +#endif +#if _FS_REENTRANT + _SYNC_t sobj; /* Identifier of sync object */ +#endif +#if !_FS_READONLY + DWORD last_clst; /* Last allocated cluster */ + DWORD free_clst; /* Number of free clusters */ +#endif +#if _FS_RPATH != 0 + DWORD cdir; /* Current directory start cluster (0:root) */ +#if _FS_EXFAT + DWORD cdc_scl; /* Containing directory start cluster (invalid when cdir is 0) */ + DWORD cdc_size; /* b31-b8:Size of containing directory, b7-b0: Chain status */ + DWORD cdc_ofs; /* Offset in the containing directory (invalid when cdir is 0) */ +#endif +#endif + DWORD n_fatent; /* Number of FAT entries (number of clusters + 2) */ + DWORD fsize; /* Size of an FAT [sectors] */ + DWORD volbase; /* Volume base sector */ + DWORD fatbase; /* FAT base sector */ + DWORD dirbase; /* Root directory base sector/cluster */ + DWORD database; /* Data base sector */ + DWORD winsect; /* Current sector appearing in the win[] */ + BYTE win[_MAX_SS]; /* Disk access window for Directory, FAT (and file data at tiny cfg) */ +} FATFS; + + + +/* Object ID and allocation information (_FDID) */ + +typedef struct { + FATFS* fs; /* Pointer to the owner file system object */ + WORD id; /* Owner file system mount ID */ + BYTE attr; /* Object attribute */ + BYTE stat; /* Object chain status (b1-0: =0:not contiguous, =2:contiguous (no data on FAT), =3:flagmented in this session, b2:sub-directory stretched) */ + DWORD sclust; /* Object start cluster (0:no cluster or root directory) */ + FSIZE_t objsize; /* Object size (valid when sclust != 0) */ +#if _FS_EXFAT + DWORD n_cont; /* Size of first fragment, clusters - 1 (valid when stat == 3) */ + DWORD n_frag; /* Size of last fragment needs to be written (valid when not zero) */ + DWORD c_scl; /* Containing directory start cluster (valid when sclust != 0) */ + DWORD c_size; /* b31-b8:Size of containing directory, b7-b0: Chain status (valid when c_scl != 0) */ + DWORD c_ofs; /* Offset in the containing directory (valid when sclust != 0 and non-directory object) */ +#endif +#if _FS_LOCK != 0 + UINT lockid; /* File lock ID origin from 1 (index of file semaphore table Files[]) */ +#endif +} _FDID; + + + +/* File object structure (FIL) */ + +typedef struct { + _FDID obj; /* Object identifier (must be the 1st member to detect invalid object pointer) */ + BYTE flag; /* File status flags */ + BYTE err; /* Abort flag (error code) */ + FSIZE_t fptr; /* File read/write pointer (Zeroed on file open) */ + DWORD clust; /* Current cluster of fpter (invalid when fptr is 0) */ + DWORD sect; /* Sector number appearing in buf[] (0:invalid) */ +#if !_FS_READONLY + DWORD dir_sect; /* Sector number containing the directory entry */ + BYTE* dir_ptr; /* Pointer to the directory entry in the win[] */ +#endif +#if _USE_FASTSEEK + DWORD* cltbl; /* Pointer to the cluster link map table (nulled on open, set by application) */ +#endif +#if !_FS_TINY + BYTE buf[_MAX_SS]; /* File private data read/write window */ +#endif +} FIL; + + + +/* Directory object structure (DIR) */ + +typedef struct { + _FDID obj; /* Object identifier */ + DWORD dptr; /* Current read/write offset */ + DWORD clust; /* Current cluster */ + DWORD sect; /* Current sector (0:Read operation has terminated) */ + BYTE* dir; /* Pointer to the directory item in the win[] */ + BYTE fn[12]; /* SFN (in/out) {body[8],ext[3],status[1]} */ +#if _USE_LFN != 0 + DWORD blk_ofs; /* Offset of current entry block being processed (0xFFFFFFFF:Invalid) */ +#endif +#if _USE_FIND + const TCHAR* pat; /* Pointer to the name matching pattern */ +#endif +} DIR; + + + +/* File information structure (FILINFO) */ + +typedef struct { + FSIZE_t fsize; /* File size */ + WORD fdate; /* Modified date */ + WORD ftime; /* Modified time */ + BYTE fattrib; /* File attribute */ +#if _USE_LFN != 0 + TCHAR altname[13]; /* Alternative file name */ + TCHAR fname[_MAX_LFN + 1]; /* Primary file name */ +#else + TCHAR fname[13]; /* File name */ +#endif +} FILINFO; + + + +/* File function return code (FRESULT) */ + +typedef enum { + FR_OK = 0, /* (0) Succeeded */ + FR_DISK_ERR, /* (1) A hard error occurred in the low level disk I/O layer */ + FR_INT_ERR, /* (2) Assertion failed */ + FR_NOT_READY, /* (3) The physical drive cannot work */ + FR_NO_FILE, /* (4) Could not find the file */ + FR_NO_PATH, /* (5) Could not find the path */ + FR_INVALID_NAME, /* (6) The path name format is invalid */ + FR_DENIED, /* (7) Access denied due to prohibited access or directory full */ + FR_EXIST, /* (8) Access denied due to prohibited access */ + FR_INVALID_OBJECT, /* (9) The file/directory object is invalid */ + FR_WRITE_PROTECTED, /* (10) The physical drive is write protected */ + FR_INVALID_DRIVE, /* (11) The logical drive number is invalid */ + FR_NOT_ENABLED, /* (12) The volume has no work area */ + FR_NO_FILESYSTEM, /* (13) There is no valid FAT volume */ + FR_MKFS_ABORTED, /* (14) The f_mkfs() aborted due to any problem */ + FR_TIMEOUT, /* (15) Could not get a grant to access the volume within defined period */ + FR_LOCKED, /* (16) The operation is rejected according to the file sharing policy */ + FR_NOT_ENOUGH_CORE, /* (17) LFN working buffer could not be allocated */ + FR_TOO_MANY_OPEN_FILES, /* (18) Number of open files > _FS_LOCK */ + FR_INVALID_PARAMETER /* (19) Given parameter is invalid */ +} FRESULT; + + + +/*--------------------------------------------------------------*/ +/* FatFs module application interface */ + +FRESULT f_open (FIL* fp, const TCHAR* path, BYTE mode); /* Open or create a file */ +FRESULT f_close (FIL* fp); /* Close an open file object */ +FRESULT f_read (FIL* fp, void* buff, UINT btr, UINT* br); /* Read data from the file */ +FRESULT f_write (FIL* fp, const void* buff, UINT btw, UINT* bw); /* Write data to the file */ +FRESULT f_lseek (FIL* fp, FSIZE_t ofs); /* Move file pointer of the file object */ +FRESULT f_truncate (FIL* fp); /* Truncate the file */ +FRESULT f_sync (FIL* fp); /* Flush cached data of the writing file */ +FRESULT f_opendir (DIR* dp, const TCHAR* path); /* Open a directory */ +FRESULT f_closedir (DIR* dp); /* Close an open directory */ +FRESULT f_readdir (DIR* dp, FILINFO* fno); /* Read a directory item */ +FRESULT f_findfirst (DIR* dp, FILINFO* fno, const TCHAR* path, const TCHAR* pattern); /* Find first file */ +FRESULT f_findnext (DIR* dp, FILINFO* fno); /* Find next file */ +FRESULT f_mkdir (const TCHAR* path); /* Create a sub directory */ +FRESULT f_unlink (const TCHAR* path); /* Delete an existing file or directory */ +FRESULT f_rename (const TCHAR* path_old, const TCHAR* path_new); /* Rename/Move a file or directory */ +FRESULT f_stat (const TCHAR* path, FILINFO* fno); /* Get file status */ +FRESULT f_chmod (const TCHAR* path, BYTE attr, BYTE mask); /* Change attribute of a file/dir */ +FRESULT f_utime (const TCHAR* path, const FILINFO* fno); /* Change timestamp of a file/dir */ +FRESULT f_chdir (const TCHAR* path); /* Change current directory */ +FRESULT f_chdrive (const TCHAR* path); /* Change current drive */ +FRESULT f_getcwd (TCHAR* buff, UINT len); /* Get current directory */ +FRESULT f_getfree (const TCHAR* path, DWORD* nclst, FATFS** fatfs); /* Get number of free clusters on the drive */ +FRESULT f_getlabel (const TCHAR* path, TCHAR* label, DWORD* vsn); /* Get volume label */ +FRESULT f_setlabel (const TCHAR* label); /* Set volume label */ +FRESULT f_forward (FIL* fp, UINT(*func)(const BYTE*,UINT), UINT btf, UINT* bf); /* Forward data to the stream */ +FRESULT f_expand (FIL* fp, FSIZE_t szf, BYTE opt); /* Allocate a contiguous block to the file */ +FRESULT f_mount (FATFS* fs, const TCHAR* path, BYTE opt); /* Mount/Unmount a logical drive */ +FRESULT f_mkfs (const TCHAR* path, BYTE opt, DWORD au, void* work, UINT len); /* Create a FAT volume */ +FRESULT f_fdisk (BYTE pdrv, const DWORD* szt, void* work); /* Divide a physical drive into some partitions */ +int f_putc (TCHAR c, FIL* fp); /* Put a character to the file */ +int f_puts (const TCHAR* str, FIL* cp); /* Put a string to the file */ +int f_printf (FIL* fp, const TCHAR* str, ...); /* Put a formatted string to the file */ +TCHAR* f_gets (TCHAR* buff, int len, FIL* fp); /* Get a string from the file */ + +#define f_eof(fp) ((int)((fp)->fptr == (fp)->obj.objsize)) +#define f_error(fp) ((fp)->err) +#define f_tell(fp) ((fp)->fptr) +#define f_size(fp) ((fp)->obj.objsize) +#define f_rewind(fp) f_lseek((fp), 0) +#define f_rewinddir(dp) f_readdir((dp), 0) +#define f_rmdir(path) f_unlink(path) + +#ifndef EOF +#define EOF (-1) +#endif + + + + +/*--------------------------------------------------------------*/ +/* Additional user defined functions */ + +/* RTC function */ +#if !_FS_READONLY && !_FS_NORTC +DWORD get_fattime (void); +#endif + +/* Unicode support functions */ +#if _USE_LFN != 0 /* Unicode - OEM code conversion */ +WCHAR ff_convert (WCHAR chr, UINT dir); /* OEM-Unicode bidirectional conversion */ +WCHAR ff_wtoupper (WCHAR chr); /* Unicode upper-case conversion */ +#if _USE_LFN == 3 /* Memory functions */ +void* ff_memalloc (UINT msize); /* Allocate memory block */ +void ff_memfree (void* mblock); /* Free memory block */ +#endif +#endif + +/* Sync functions */ +#if _FS_REENTRANT +int ff_cre_syncobj (BYTE vol, _SYNC_t* sobj); /* Create a sync object */ +int ff_req_grant (_SYNC_t sobj); /* Lock sync object */ +void ff_rel_grant (_SYNC_t sobj); /* Unlock sync object */ +int ff_del_syncobj (_SYNC_t sobj); /* Delete a sync object */ +#endif + + + + +/*--------------------------------------------------------------*/ +/* Flags and offset address */ + + +/* File access mode and open method flags (3rd argument of f_open) */ +#define FA_READ 0x01 +#define FA_WRITE 0x02 +#define FA_OPEN_EXISTING 0x00 +#define FA_CREATE_NEW 0x04 +#define FA_CREATE_ALWAYS 0x08 +#define FA_OPEN_ALWAYS 0x10 +#define FA_OPEN_APPEND 0x30 + +/* Fast seek controls (2nd argument of f_lseek) */ +#define CREATE_LINKMAP ((FSIZE_t)0 - 1) + +/* Format options (2nd argument of f_mkfs) */ +#define FM_FAT 0x01 +#define FM_FAT32 0x02 +#define FM_EXFAT 0x04 +#define FM_ANY 0x07 +#define FM_SFD 0x08 + +/* Filesystem type (FATFS.fs_type) */ +#define FS_FAT12 1 +#define FS_FAT16 2 +#define FS_FAT32 3 +#define FS_EXFAT 4 + +/* File attribute bits for directory entry (FILINFO.fattrib) */ +#define AM_RDO 0x01 /* Read only */ +#define AM_HID 0x02 /* Hidden */ +#define AM_SYS 0x04 /* System */ +#define AM_DIR 0x10 /* Directory */ +#define AM_ARC 0x20 /* Archive */ + + +#ifdef __cplusplus +} +#endif + +#endif /* _FATFS */ diff --git a/Middlewares/Third_Party/FatFs/src/ff_gen_drv.c b/Middlewares/Third_Party/FatFs/src/ff_gen_drv.c new file mode 100644 index 0000000..4865528 --- /dev/null +++ b/Middlewares/Third_Party/FatFs/src/ff_gen_drv.c @@ -0,0 +1,124 @@ +/** + ****************************************************************************** + * @file ff_gen_drv.c + * @author MCD Application Team + * @brief FatFs generic low level driver. + ***************************************************************************** + * @attention + * + *

© Copyright (c) 2017 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under Ultimate Liberty license + * SLA0044, the "License"; You may not use this file except in compliance with + * the License. You may obtain a copy of the License at: + * www.st.com/SLA0044 + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "ff_gen_drv.h" + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +Disk_drvTypeDef disk = {{0},{0},{0},0}; + +/* Private function prototypes -----------------------------------------------*/ +/* Private functions ---------------------------------------------------------*/ + +/** + * @brief Links a compatible diskio driver/lun id and increments the number of active + * linked drivers. + * @note The number of linked drivers (volumes) is up to 10 due to FatFs limits. + * @param drv: pointer to the disk IO Driver structure + * @param path: pointer to the logical drive path + * @param lun : only used for USB Key Disk to add multi-lun management + else the parameter must be equal to 0 + * @retval Returns 0 in case of success, otherwise 1. + */ +uint8_t FATFS_LinkDriverEx(const Diskio_drvTypeDef *drv, char *path, uint8_t lun) +{ + uint8_t ret = 1; + uint8_t DiskNum = 0; + + if(disk.nbr < _VOLUMES) + { + disk.is_initialized[disk.nbr] = 0; + disk.drv[disk.nbr] = drv; + disk.lun[disk.nbr] = lun; + DiskNum = disk.nbr++; + path[0] = DiskNum + '0'; + path[1] = ':'; + path[2] = '/'; + path[3] = 0; + ret = 0; + } + + return ret; +} + +/** + * @brief Links a compatible diskio driver and increments the number of active + * linked drivers. + * @note The number of linked drivers (volumes) is up to 10 due to FatFs limits + * @param drv: pointer to the disk IO Driver structure + * @param path: pointer to the logical drive path + * @retval Returns 0 in case of success, otherwise 1. + */ +uint8_t FATFS_LinkDriver(const Diskio_drvTypeDef *drv, char *path) +{ + return FATFS_LinkDriverEx(drv, path, 0); +} + +/** + * @brief Unlinks a diskio driver and decrements the number of active linked + * drivers. + * @param path: pointer to the logical drive path + * @param lun : not used + * @retval Returns 0 in case of success, otherwise 1. + */ +uint8_t FATFS_UnLinkDriverEx(char *path, uint8_t lun) +{ + uint8_t DiskNum = 0; + uint8_t ret = 1; + + if(disk.nbr >= 1) + { + DiskNum = path[0] - '0'; + if(disk.drv[DiskNum] != 0) + { + disk.drv[DiskNum] = 0; + disk.lun[DiskNum] = 0; + disk.nbr--; + ret = 0; + } + } + + return ret; +} + +/** + * @brief Unlinks a diskio driver and decrements the number of active linked + * drivers. + * @param path: pointer to the logical drive path + * @retval Returns 0 in case of success, otherwise 1. + */ +uint8_t FATFS_UnLinkDriver(char *path) +{ + return FATFS_UnLinkDriverEx(path, 0); +} + +/** + * @brief Gets number of linked drivers to the FatFs module. + * @param None + * @retval Number of attached drivers. + */ +uint8_t FATFS_GetAttachedDriversNbr(void) +{ + return disk.nbr; +} + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ + diff --git a/Middlewares/Third_Party/FatFs/src/ff_gen_drv.h b/Middlewares/Third_Party/FatFs/src/ff_gen_drv.h new file mode 100644 index 0000000..f27bc5b --- /dev/null +++ b/Middlewares/Third_Party/FatFs/src/ff_gen_drv.h @@ -0,0 +1,82 @@ +/** + ****************************************************************************** + * @file ff_gen_drv.h + * @author MCD Application Team + * @brief Header for ff_gen_drv.c module. + ***************************************************************************** + * @attention + * + *

© Copyright (c) 2017 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under Ultimate Liberty license + * SLA0044, the "License"; You may not use this file except in compliance with + * the License. You may obtain a copy of the License at: + * www.st.com/SLA0044 + * + ****************************************************************************** + */ + + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __FF_GEN_DRV_H +#define __FF_GEN_DRV_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "diskio.h" +#include "ff.h" +#include "stdint.h" + + +/* Exported types ------------------------------------------------------------*/ + +/** + * @brief Disk IO Driver structure definition + */ +typedef struct +{ + DSTATUS (*disk_initialize) (BYTE); /*!< Initialize Disk Drive */ + DSTATUS (*disk_status) (BYTE); /*!< Get Disk Status */ + DRESULT (*disk_read) (BYTE, BYTE*, DWORD, UINT); /*!< Read Sector(s) */ +#if _USE_WRITE == 1 + DRESULT (*disk_write) (BYTE, const BYTE*, DWORD, UINT); /*!< Write Sector(s) when _USE_WRITE = 0 */ +#endif /* _USE_WRITE == 1 */ +#if _USE_IOCTL == 1 + DRESULT (*disk_ioctl) (BYTE, BYTE, void*); /*!< I/O control operation when _USE_IOCTL = 1 */ +#endif /* _USE_IOCTL == 1 */ + +}Diskio_drvTypeDef; + +/** + * @brief Global Disk IO Drivers structure definition + */ +typedef struct +{ + uint8_t is_initialized[_VOLUMES]; + const Diskio_drvTypeDef *drv[_VOLUMES]; + uint8_t lun[_VOLUMES]; + volatile uint8_t nbr; + +}Disk_drvTypeDef; + +/* Exported constants --------------------------------------------------------*/ +/* Exported macro ------------------------------------------------------------*/ +/* Exported functions ------------------------------------------------------- */ +uint8_t FATFS_LinkDriver(const Diskio_drvTypeDef *drv, char *path); +uint8_t FATFS_UnLinkDriver(char *path); +uint8_t FATFS_LinkDriverEx(const Diskio_drvTypeDef *drv, char *path, BYTE lun); +uint8_t FATFS_UnLinkDriverEx(char *path, BYTE lun); +uint8_t FATFS_GetAttachedDriversNbr(void); + +#ifdef __cplusplus +} +#endif + +#endif /* __FF_GEN_DRV_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ + diff --git a/Middlewares/Third_Party/FatFs/src/integer.h b/Middlewares/Third_Party/FatFs/src/integer.h new file mode 100644 index 0000000..d8e911c --- /dev/null +++ b/Middlewares/Third_Party/FatFs/src/integer.h @@ -0,0 +1,38 @@ +/*-------------------------------------------*/ +/* Integer type definitions for FatFs module */ +/*-------------------------------------------*/ + +#ifndef _FF_INTEGER +#define _FF_INTEGER + +#ifdef _WIN32 /* FatFs development platform */ + +#include +#include +typedef unsigned __int64 QWORD; + + +#else /* Embedded platform */ + +/* These types MUST be 16-bit or 32-bit */ +typedef int INT; +typedef unsigned int UINT; + +/* This type MUST be 8-bit */ +typedef unsigned char BYTE; + +/* These types MUST be 16-bit */ +typedef short SHORT; +typedef unsigned short WORD; +typedef unsigned short WCHAR; + +/* These types MUST be 32-bit */ +typedef long LONG; +typedef unsigned long DWORD; + +/* This type MUST be 64-bit (Remove this for ANSI C (C89) compatibility) */ +typedef unsigned long long QWORD; + +#endif + +#endif diff --git a/Middlewares/Third_Party/FatFs/src/option/ccsbcs.c b/Middlewares/Third_Party/FatFs/src/option/ccsbcs.c new file mode 100644 index 0000000..164caa0 --- /dev/null +++ b/Middlewares/Third_Party/FatFs/src/option/ccsbcs.c @@ -0,0 +1,388 @@ +/*------------------------------------------------------------------------*/ +/* Unicode - Local code bidirectional converter (C)ChaN, 2015 */ +/* (SBCS code pages) */ +/*------------------------------------------------------------------------*/ +/* 437 U.S. +/ 720 Arabic +/ 737 Greek +/ 771 KBL +/ 775 Baltic +/ 850 Latin 1 +/ 852 Latin 2 +/ 855 Cyrillic +/ 857 Turkish +/ 860 Portuguese +/ 861 Icelandic +/ 862 Hebrew +/ 863 Canadian French +/ 864 Arabic +/ 865 Nordic +/ 866 Russian +/ 869 Greek 2 +*/ + +#include "../ff.h" + + +#if _CODE_PAGE == 437 +#define _TBLDEF 1 +static +const WCHAR Tbl[] = { /* CP437(0x80-0xFF) to Unicode conversion table */ + 0x00C7, 0x00FC, 0x00E9, 0x00E2, 0x00E4, 0x00E0, 0x00E5, 0x00E7, 0x00EA, 0x00EB, 0x00E8, 0x00EF, 0x00EE, 0x00EC, 0x00C4, 0x00C5, + 0x00C9, 0x00E6, 0x00C6, 0x00F4, 0x00F6, 0x00F2, 0x00FB, 0x00F9, 0x00FF, 0x00D6, 0x00DC, 0x00A2, 0x00A3, 0x00A5, 0x20A7, 0x0192, + 0x00E1, 0x00ED, 0x00F3, 0x00FA, 0x00F1, 0x00D1, 0x00AA, 0x00BA, 0x00BF, 0x2310, 0x00AC, 0x00BD, 0x00BC, 0x00A1, 0x00AB, 0x00BB, + 0x2591, 0x2592, 0x2593, 0x2502, 0x2524, 0x2561, 0x2562, 0x2556, 0x2555, 0x2563, 0x2551, 0x2557, 0x255D, 0x255C, 0x255B, 0x2510, + 0x2514, 0x2534, 0x252C, 0x251C, 0x2500, 0x253C, 0x255E, 0x255F, 0x255A, 0x2554, 0x2569, 0x2566, 0x2560, 0x2550, 0x256C, 0x2567, + 0x2568, 0x2564, 0x2565, 0x2559, 0x2558, 0x2552, 0x2553, 0x256B, 0x256A, 0x2518, 0x250C, 0x2588, 0x2584, 0x258C, 0x2590, 0x2580, + 0x03B1, 0x00DF, 0x0393, 0x03C0, 0x03A3, 0x03C3, 0x00B5, 0x03C4, 0x03A6, 0x0398, 0x03A9, 0x03B4, 0x221E, 0x03C6, 0x03B5, 0x2229, + 0x2261, 0x00B1, 0x2265, 0x2264, 0x2320, 0x2321, 0x00F7, 0x2248, 0x00B0, 0x2219, 0x00B7, 0x221A, 0x207F, 0x00B2, 0x25A0, 0x00A0 +}; + +#elif _CODE_PAGE == 720 +#define _TBLDEF 1 +static +const WCHAR Tbl[] = { /* CP720(0x80-0xFF) to Unicode conversion table */ + 0x0000, 0x0000, 0x00E9, 0x00E2, 0x0000, 0x00E0, 0x0000, 0x00E7, 0x00EA, 0x00EB, 0x00E8, 0x00EF, 0x00EE, 0x0000, 0x0000, 0x0000, + 0x0000, 0x0651, 0x0652, 0x00F4, 0x00A4, 0x0640, 0x00FB, 0x00F9, 0x0621, 0x0622, 0x0623, 0x0624, 0x00A3, 0x0625, 0x0626, 0x0627, + 0x0628, 0x0629, 0x062A, 0x062B, 0x062C, 0x062D, 0x062E, 0x062F, 0x0630, 0x0631, 0x0632, 0x0633, 0x0634, 0x0635, 0x00AB, 0x00BB, + 0x2591, 0x2592, 0x2593, 0x2502, 0x2524, 0x2561, 0x2562, 0x2556, 0x2555, 0x2563, 0x2551, 0x2557, 0x255D, 0x255C, 0x255B, 0x2510, + 0x2514, 0x2534, 0x252C, 0x251C, 0x2500, 0x253C, 0x255E, 0x255F, 0x255A, 0x2554, 0x2569, 0x2566, 0x2560, 0x2550, 0x256C, 0x2567, + 0x2568, 0x2564, 0x2565, 0x2559, 0x2558, 0x2552, 0x2553, 0x256B, 0x256A, 0x2518, 0x250C, 0x2588, 0x2584, 0x258C, 0x2590, 0x2580, + 0x0636, 0x0637, 0x0638, 0x0639, 0x063A, 0x0641, 0x00B5, 0x0642, 0x0643, 0x0644, 0x0645, 0x0646, 0x0647, 0x0648, 0x0649, 0x064A, + 0x2261, 0x064B, 0x064C, 0x064D, 0x064E, 0x064F, 0x0650, 0x2248, 0x00B0, 0x2219, 0x00B7, 0x221A, 0x207F, 0x00B2, 0x25A0, 0x00A0 +}; + +#elif _CODE_PAGE == 737 +#define _TBLDEF 1 +static +const WCHAR Tbl[] = { /* CP737(0x80-0xFF) to Unicode conversion table */ + 0x0391, 0x0392, 0x0393, 0x0394, 0x0395, 0x0396, 0x0397, 0x0398, 0x0399, 0x039A, 0x039B, 0x039C, 0x039D, 0x039E, 0x039F, 0x03A0, + 0x03A1, 0x03A3, 0x03A4, 0x03A5, 0x03A6, 0x03A7, 0x03A8, 0x03A9, 0x03B1, 0x03B2, 0x03B3, 0x03B4, 0x03B5, 0x03B6, 0x03B7, 0x03B8, + 0x03B9, 0x03BA, 0x03BB, 0x03BC, 0x03BD, 0x03BE, 0x03BF, 0x03C0, 0x03C1, 0x03C3, 0x03C2, 0x03C4, 0x03C5, 0x03C6, 0x03C7, 0x03C8, + 0x2591, 0x2592, 0x2593, 0x2502, 0x2524, 0x2561, 0x2562, 0x2556, 0x2555, 0x2563, 0x2551, 0x2557, 0x255D, 0x255C, 0x255B, 0x2510, + 0x2514, 0x2534, 0x252C, 0x251C, 0x2500, 0x253C, 0x255E, 0x255F, 0x255A, 0x2554, 0x2569, 0x2566, 0x2560, 0x2550, 0x256C, 0x2567, + 0x2568, 0x2564, 0x2565, 0x2559, 0x2558, 0x2552, 0x2553, 0x256B, 0x256A, 0x2518, 0x250C, 0x2588, 0x2584, 0x258C, 0x2590, 0x2580, + 0x03C9, 0x03AC, 0x03AD, 0x03AE, 0x03CA, 0x03AF, 0x03CC, 0x03CD, 0x03CB, 0x03CE, 0x0386, 0x0388, 0x0389, 0x038A, 0x038C, 0x038E, + 0x038F, 0x00B1, 0x2265, 0x2264, 0x03AA, 0x03AB, 0x00F7, 0x2248, 0x00B0, 0x2219, 0x00B7, 0x221A, 0x207F, 0x00B2, 0x25A0, 0x00A0 +}; + +#elif _CODE_PAGE == 771 +#define _TBLDEF 1 +static +const WCHAR Tbl[] = { /* CP771(0x80-0xFF) to Unicode conversion table */ + 0x0410, 0x0411, 0x0412, 0x0413, 0x0414, 0x0415, 0x0416, 0x0417, 0x0418, 0x0419, 0x041A, 0x041B, 0x041C, 0x041D, 0x041E, 0x041F, + 0x0420, 0x0421, 0x0422, 0x0423, 0x0424, 0x0425, 0x0426, 0x0427, 0x0428, 0x0429, 0x042A, 0x042B, 0x042C, 0x042D, 0x042E, 0x042F, + 0x0430, 0x0431, 0x0432, 0x0433, 0x0434, 0x0435, 0x0436, 0x0437, 0x0438, 0x0439, 0x043A, 0x043B, 0x043C, 0x043D, 0x043E, 0x043F, + 0x2591, 0x2592, 0x2593, 0x2502, 0x2524, 0x2561, 0x2562, 0x2556, 0x2555, 0x2563, 0x2551, 0x2557, 0x255D, 0x255C, 0x2558, 0x2510, + 0x2514, 0x2534, 0x252C, 0x251C, 0x2500, 0x253C, 0x255E, 0x255F, 0x255A, 0x2554, 0x2569, 0x2566, 0x2560, 0x2550, 0x256C, 0x2567, + 0x2568, 0x2564, 0x2565, 0x2559, 0x2558, 0x2552, 0x2553, 0x256B, 0x256A, 0x2518, 0x250C, 0x2588, 0x0104, 0x0105, 0x010C, 0x010D, + 0x0440, 0x0441, 0x0442, 0x0443, 0x0444, 0x0445, 0x0446, 0x0447, 0x0448, 0x0449, 0x044A, 0x044B, 0x044C, 0x044D, 0x044E, 0x044F, + 0x0118, 0x0119, 0x0116, 0x0117, 0x012E, 0x012F, 0x0160, 0x0161, 0x0172, 0x0173, 0x016A, 0x016B, 0x017D, 0x017E, 0x25A0, 0x00A0 +}; + +#elif _CODE_PAGE == 775 +#define _TBLDEF 1 +static +const WCHAR Tbl[] = { /* CP775(0x80-0xFF) to Unicode conversion table */ + 0x0106, 0x00FC, 0x00E9, 0x0101, 0x00E4, 0x0123, 0x00E5, 0x0107, 0x0142, 0x0113, 0x0156, 0x0157, 0x012B, 0x0179, 0x00C4, 0x00C5, + 0x00C9, 0x00E6, 0x00C6, 0x014D, 0x00F6, 0x0122, 0x00A2, 0x015A, 0x015B, 0x00D6, 0x00DC, 0x00F8, 0x00A3, 0x00D8, 0x00D7, 0x00A4, + 0x0100, 0x012A, 0x00F3, 0x017B, 0x017C, 0x017A, 0x201D, 0x00A6, 0x00A9, 0x00AE, 0x00AC, 0x00BD, 0x00BC, 0x0141, 0x00AB, 0x00BB, + 0x2591, 0x2592, 0x2593, 0x2502, 0x2524, 0x0104, 0x010C, 0x0118, 0x0116, 0x2563, 0x2551, 0x2557, 0x255D, 0x012E, 0x0160, 0x2510, + 0x2514, 0x2534, 0x252C, 0x251C, 0x2500, 0x253C, 0x0172, 0x016A, 0x255A, 0x2554, 0x2569, 0x2566, 0x2560, 0x2550, 0x256C, 0x017D, + 0x0105, 0x010D, 0x0119, 0x0117, 0x012F, 0x0161, 0x0173, 0x016B, 0x017E, 0x2518, 0x250C, 0x2588, 0x2584, 0x258C, 0x2590, 0x2580, + 0x00D3, 0x00DF, 0x014C, 0x0143, 0x00F5, 0x00D5, 0x00B5, 0x0144, 0x0136, 0x0137, 0x013B, 0x013C, 0x0146, 0x0112, 0x0145, 0x2019, + 0x00AD, 0x00B1, 0x201C, 0x00BE, 0x00B6, 0x00A7, 0x00F7, 0x201E, 0x00B0, 0x2219, 0x00B7, 0x00B9, 0x00B3, 0x00B2, 0x25A0, 0x00A0 +}; + +#elif _CODE_PAGE == 850 +#define _TBLDEF 1 +static +const WCHAR Tbl[] = { /* CP850(0x80-0xFF) to Unicode conversion table */ + 0x00C7, 0x00FC, 0x00E9, 0x00E2, 0x00E4, 0x00E0, 0x00E5, 0x00E7, 0x00EA, 0x00EB, 0x00E8, 0x00EF, 0x00EE, 0x00EC, 0x00C4, 0x00C5, + 0x00C9, 0x00E6, 0x00C6, 0x00F4, 0x00F6, 0x00F2, 0x00FB, 0x00F9, 0x00FF, 0x00D6, 0x00DC, 0x00F8, 0x00A3, 0x00D8, 0x00D7, 0x0192, + 0x00E1, 0x00ED, 0x00F3, 0x00FA, 0x00F1, 0x00D1, 0x00AA, 0x00BA, 0x00BF, 0x00AE, 0x00AC, 0x00BD, 0x00BC, 0x00A1, 0x00AB, 0x00BB, + 0x2591, 0x2592, 0x2593, 0x2502, 0x2524, 0x00C1, 0x00C2, 0x00C0, 0x00A9, 0x2563, 0x2551, 0x2557, 0x255D, 0x00A2, 0x00A5, 0x2510, + 0x2514, 0x2534, 0x252C, 0x251C, 0x2500, 0x253C, 0x00E3, 0x00C3, 0x255A, 0x2554, 0x2569, 0x2566, 0x2560, 0x2550, 0x256C, 0x00A4, + 0x00F0, 0x00D0, 0x00CA, 0x00CB, 0x00C8, 0x0131, 0x00CD, 0x00CE, 0x00CF, 0x2518, 0x250C, 0x2588, 0x2584, 0x00A6, 0x00CC, 0x2580, + 0x00D3, 0x00DF, 0x00D4, 0x00D2, 0x00F5, 0x00D5, 0x00B5, 0x00FE, 0x00DE, 0x00DA, 0x00DB, 0x00D9, 0x00FD, 0x00DD, 0x00AF, 0x00B4, + 0x00AD, 0x00B1, 0x2017, 0x00BE, 0x00B6, 0x00A7, 0x00F7, 0x00B8, 0x00B0, 0x00A8, 0x00B7, 0x00B9, 0x00B3, 0x00B2, 0x25A0, 0x00A0 +}; + +#elif _CODE_PAGE == 852 +#define _TBLDEF 1 +static +const WCHAR Tbl[] = { /* CP852(0x80-0xFF) to Unicode conversion table */ + 0x00C7, 0x00FC, 0x00E9, 0x00E2, 0x00E4, 0x016F, 0x0107, 0x00E7, 0x0142, 0x00EB, 0x0150, 0x0151, 0x00EE, 0x0179, 0x00C4, 0x0106, + 0x00C9, 0x0139, 0x013A, 0x00F4, 0x00F6, 0x013D, 0x013E, 0x015A, 0x015B, 0x00D6, 0x00DC, 0x0164, 0x0165, 0x0141, 0x00D7, 0x010D, + 0x00E1, 0x00ED, 0x00F3, 0x00FA, 0x0104, 0x0105, 0x017D, 0x017E, 0x0118, 0x0119, 0x00AC, 0x017A, 0x010C, 0x015F, 0x00AB, 0x00BB, + 0x2591, 0x2592, 0x2593, 0x2502, 0x2524, 0x00C1, 0x00C2, 0x011A, 0x015E, 0x2563, 0x2551, 0x2557, 0x255D, 0x017B, 0x017C, 0x2510, + 0x2514, 0x2534, 0x252C, 0x251C, 0x2500, 0x253C, 0x0102, 0x0103, 0x255A, 0x2554, 0x2569, 0x2566, 0x2560, 0x2550, 0x256C, 0x00A4, + 0x0111, 0x0110, 0x010E, 0x00CB, 0x010F, 0x0147, 0x00CD, 0x00CE, 0x011B, 0x2518, 0x250C, 0x2588, 0x2584, 0x0162, 0x016E, 0x2580, + 0x00D3, 0x00DF, 0x00D4, 0x0143, 0x0144, 0x0148, 0x0160, 0x0161, 0x0154, 0x00DA, 0x0155, 0x0170, 0x00FD, 0x00DD, 0x0163, 0x00B4, + 0x00AD, 0x02DD, 0x02DB, 0x02C7, 0x02D8, 0x00A7, 0x00F7, 0x00B8, 0x00B0, 0x00A8, 0x02D9, 0x0171, 0x0158, 0x0159, 0x25A0, 0x00A0 +}; + +#elif _CODE_PAGE == 855 +#define _TBLDEF 1 +static +const WCHAR Tbl[] = { /* CP855(0x80-0xFF) to Unicode conversion table */ + 0x0452, 0x0402, 0x0453, 0x0403, 0x0451, 0x0401, 0x0454, 0x0404, 0x0455, 0x0405, 0x0456, 0x0406, 0x0457, 0x0407, 0x0458, 0x0408, + 0x0459, 0x0409, 0x045A, 0x040A, 0x045B, 0x040B, 0x045C, 0x040C, 0x045E, 0x040E, 0x045F, 0x040F, 0x044E, 0x042E, 0x044A, 0x042A, + 0x0430, 0x0410, 0x0431, 0x0411, 0x0446, 0x0426, 0x0434, 0x0414, 0x0435, 0x0415, 0x0444, 0x0424, 0x0433, 0x0413, 0x00AB, 0x00BB, + 0x2591, 0x2592, 0x2593, 0x2502, 0x2524, 0x0445, 0x0425, 0x0438, 0x0418, 0x2563, 0x2551, 0x2557, 0x255D, 0x0439, 0x0419, 0x2510, + 0x2514, 0x2534, 0x252C, 0x251C, 0x2500, 0x253C, 0x043A, 0x041A, 0x255A, 0x2554, 0x2569, 0x2566, 0x2560, 0x2550, 0x256C, 0x00A4, + 0x043B, 0x041B, 0x043C, 0x041C, 0x043D, 0x041D, 0x043E, 0x041E, 0x043F, 0x2518, 0x250C, 0x2588, 0x2584, 0x041F, 0x044F, 0x2580, + 0x042F, 0x0440, 0x0420, 0x0441, 0x0421, 0x0442, 0x0422, 0x0443, 0x0423, 0x0436, 0x0416, 0x0432, 0x0412, 0x044C, 0x042C, 0x2116, + 0x00AD, 0x044B, 0x042B, 0x0437, 0x0417, 0x0448, 0x0428, 0x044D, 0x042D, 0x0449, 0x0429, 0x0447, 0x0427, 0x00A7, 0x25A0, 0x00A0 +}; + +#elif _CODE_PAGE == 857 +#define _TBLDEF 1 +static +const WCHAR Tbl[] = { /* CP857(0x80-0xFF) to Unicode conversion table */ + 0x00C7, 0x00FC, 0x00E9, 0x00E2, 0x00E4, 0x00E0, 0x00E5, 0x00E7, 0x00EA, 0x00EB, 0x00E8, 0x00EF, 0x00EE, 0x0131, 0x00C4, 0x00C5, + 0x00C9, 0x00E6, 0x00C6, 0x00F4, 0x00F6, 0x00F2, 0x00FB, 0x00F9, 0x0130, 0x00D6, 0x00DC, 0x00F8, 0x00A3, 0x00D8, 0x015E, 0x015F, + 0x00E1, 0x00ED, 0x00F3, 0x00FA, 0x00F1, 0x00D1, 0x011E, 0x011F, 0x00BF, 0x00AE, 0x00AC, 0x00BD, 0x00BC, 0x00A1, 0x00AB, 0x00BB, + 0x2591, 0x2592, 0x2593, 0x2502, 0x2524, 0x00C1, 0x00C2, 0x00C0, 0x00A9, 0x2563, 0x2551, 0x2557, 0x255D, 0x00A2, 0x00A5, 0x2510, + 0x2514, 0x2534, 0x252C, 0x251C, 0x2500, 0x253C, 0x00E3, 0x00C3, 0x255A, 0x2554, 0x2569, 0x2566, 0x2560, 0x2550, 0x256C, 0x00A4, + 0x00BA, 0x00AA, 0x00CA, 0x00CB, 0x00C8, 0x0000, 0x00CD, 0x00CE, 0x00CF, 0x2518, 0x250C, 0x2588, 0x2584, 0x00A6, 0x00CC, 0x2580, + 0x00D3, 0x00DF, 0x00D4, 0x00D2, 0x00F5, 0x00D5, 0x00B5, 0x0000, 0x00D7, 0x00DA, 0x00DB, 0x00D9, 0x00EC, 0x00FF, 0x00AF, 0x00B4, + 0x00AD, 0x00B1, 0x0000, 0x00BE, 0x00B6, 0x00A7, 0x00F7, 0x00B8, 0x00B0, 0x00A8, 0x00B7, 0x00B9, 0x00B3, 0x00B2, 0x25A0, 0x00A0 +}; + +#elif _CODE_PAGE == 860 +#define _TBLDEF 1 +static +const WCHAR Tbl[] = { /* CP860(0x80-0xFF) to Unicode conversion table */ + 0x00C7, 0x00FC, 0x00E9, 0x00E2, 0x00E3, 0x00E0, 0x00C1, 0x00E7, 0x00EA, 0x00CA, 0x00E8, 0x00CD, 0x00D4, 0x00EC, 0x00C3, 0x00C2, + 0x00C9, 0x00C0, 0x00C8, 0x00F4, 0x00F5, 0x00F2, 0x00DA, 0x00F9, 0x00CC, 0x00D5, 0x00DC, 0x00A2, 0x00A3, 0x00D9, 0x20A7, 0x00D3, + 0x00E1, 0x00ED, 0x00F3, 0x00FA, 0x00F1, 0x00D1, 0x00AA, 0x00BA, 0x00BF, 0x00D2, 0x00AC, 0x00BD, 0x00BC, 0x00A1, 0x00AB, 0x00BB, + 0x2591, 0x2592, 0x2593, 0x2502, 0x2524, 0x2561, 0x2562, 0x2556, 0x2555, 0x2563, 0x2551, 0x2557, 0x255D, 0x255C, 0x2558, 0x2510, + 0x2514, 0x2534, 0x252C, 0x251C, 0x2500, 0x253C, 0x255E, 0x255F, 0x255A, 0x2554, 0x2569, 0x2566, 0x2560, 0x2550, 0x256C, 0x2567, + 0x2568, 0x2564, 0x2565, 0x2559, 0x2558, 0x2552, 0x2553, 0x256B, 0x256A, 0x2518, 0x250C, 0x2588, 0x2584, 0x258C, 0x2590, 0x2580, + 0x03B1, 0x00DF, 0x0393, 0x03C0, 0x03A3, 0x03C3, 0x00B5, 0x03C4, 0x03A6, 0x0398, 0x03A9, 0x03B4, 0x221E, 0x03C6, 0x03B5, 0x2229, + 0x2261, 0x00B1, 0x2265, 0x2264, 0x2320, 0x2321, 0x00F7, 0x2248, 0x00B0, 0x2219, 0x00B7, 0x221A, 0x207F, 0x00B2, 0x25A0, 0x00A0 +}; + +#elif _CODE_PAGE == 861 +#define _TBLDEF 1 +static +const WCHAR Tbl[] = { /* CP861(0x80-0xFF) to Unicode conversion table */ + 0x00C7, 0x00FC, 0x00E9, 0x00E2, 0x00E4, 0x00E0, 0x00E6, 0x00E7, 0x00EA, 0x00EB, 0x00E8, 0x00D0, 0x00F0, 0x00DE, 0x00C4, 0x00C5, + 0x00C9, 0x00E6, 0x00C6, 0x00F4, 0x00F6, 0x00FE, 0x00FB, 0x00DD, 0x00FD, 0x00D6, 0x00DC, 0x00F8, 0x00A3, 0x00D8, 0x20A7, 0x0192, + 0x00E1, 0x00ED, 0x00F3, 0x00FA, 0x00C1, 0x00CD, 0x00D3, 0x00DA, 0x00BF, 0x2310, 0x00AC, 0x00BD, 0x00BC, 0x00A1, 0x00AB, 0x00BB, + 0x2591, 0x2592, 0x2593, 0x2502, 0x2524, 0x2561, 0x2562, 0x2556, 0x2555, 0x2563, 0x2551, 0x2557, 0x255D, 0x255C, 0x255B, 0x2510, + 0x2514, 0x2534, 0x252C, 0x251C, 0x2500, 0x253C, 0x255E, 0x255F, 0x255A, 0x2554, 0x2569, 0x2566, 0x2560, 0x2550, 0x256C, 0x2567, + 0x2568, 0x2564, 0x2565, 0x2559, 0x2558, 0x2552, 0x2553, 0x256B, 0x256A, 0x2518, 0x250C, 0x2588, 0x2584, 0x258C, 0x2590, 0x2580, + 0x03B1, 0x00DF, 0x0393, 0x03C0, 0x03A3, 0x03C3, 0x00B5, 0x03C4, 0x03A6, 0x0398, 0x03A9, 0x03B4, 0x221E, 0x03C6, 0x03B5, 0x2229, + 0x2261, 0x00B1, 0x2265, 0x2264, 0x2320, 0x2321, 0x00F7, 0x2248, 0x00B0, 0x2219, 0x00B7, 0x221A, 0x207F, 0x00B2, 0x25A0, 0x00A0 +}; + +#elif _CODE_PAGE == 862 +#define _TBLDEF 1 +static +const WCHAR Tbl[] = { /* CP862(0x80-0xFF) to Unicode conversion table */ + 0x05D0, 0x05D1, 0x05D2, 0x05D3, 0x05D4, 0x05D5, 0x05D6, 0x05D7, 0x05D8, 0x05D9, 0x05DA, 0x05DB, 0x05DC, 0x05DD, 0x05DE, 0x05DF, + 0x05E0, 0x05E1, 0x05E2, 0x05E3, 0x05E4, 0x05E5, 0x05E6, 0x05E7, 0x05E8, 0x05E9, 0x05EA, 0x00A2, 0x00A3, 0x00A5, 0x20A7, 0x0192, + 0x00E1, 0x00ED, 0x00F3, 0x00FA, 0x00F1, 0x00D1, 0x00AA, 0x00BA, 0x00BF, 0x2310, 0x00AC, 0x00BD, 0x00BC, 0x00A1, 0x00AB, 0x00BB, + 0x2591, 0x2592, 0x2593, 0x2502, 0x2524, 0x2561, 0x2562, 0x2556, 0x2555, 0x2563, 0x2551, 0x2557, 0x255D, 0x255C, 0x255B, 0x2510, + 0x2514, 0x2534, 0x252C, 0x251C, 0x2500, 0x253C, 0x255E, 0x255F, 0x255A, 0x2554, 0x2569, 0x2566, 0x2560, 0x2550, 0x256C, 0x2567, + 0x2568, 0x2564, 0x2565, 0x2559, 0x2558, 0x2552, 0x2553, 0x256B, 0x256A, 0x2518, 0x250C, 0x2588, 0x2584, 0x258C, 0x2590, 0x2580, + 0x03B1, 0x00DF, 0x0393, 0x03C0, 0x03A3, 0x03C3, 0x00B5, 0x03C4, 0x03A6, 0x0398, 0x03A9, 0x03B4, 0x221E, 0x03C6, 0x03B5, 0x2229, + 0x2261, 0x00B1, 0x2265, 0x2264, 0x2320, 0x2321, 0x00F7, 0x2248, 0x00B0, 0x2219, 0x00B7, 0x221A, 0x207F, 0x00B2, 0x25A0, 0x00A0 +}; + +#elif _CODE_PAGE == 863 +#define _TBLDEF 1 +static +const WCHAR Tbl[] = { /* CP863(0x80-0xFF) to Unicode conversion table */ + 0x00C7, 0x00FC, 0x00E9, 0x00E2, 0x00C2, 0x00E0, 0x00B6, 0x00E7, 0x00EA, 0x00EB, 0x00E8, 0x00EF, 0x00EE, 0x00EC, 0x2017, 0x00C0, + 0x00C9, 0x00C8, 0x00CA, 0x00F4, 0x00CB, 0x00CF, 0x00FB, 0x00F9, 0x00A4, 0x00D4, 0x00DC, 0x00A2, 0x00A3, 0x00D9, 0x00DB, 0x0192, + 0x00A6, 0x00B4, 0x00F3, 0x00FA, 0x00A8, 0x00BB, 0x00B3, 0x00AF, 0x00CE, 0x3210, 0x00AC, 0x00BD, 0x00BC, 0x00BE, 0x00AB, 0x00BB, + 0x2591, 0x2592, 0x2593, 0x2502, 0x2524, 0x2561, 0x2562, 0x2556, 0x2555, 0x2563, 0x2551, 0x2557, 0x255D, 0x255C, 0x255B, 0x2510, + 0x2514, 0x2534, 0x252C, 0x251C, 0x2500, 0x253C, 0x255E, 0x255F, 0x255A, 0x2554, 0x2569, 0x2566, 0x2560, 0x2550, 0x256C, 0x2567, + 0x2568, 0x2564, 0x2565, 0x2559, 0x2558, 0x2552, 0x2553, 0x256B, 0x256A, 0x2518, 0x250C, 0x2588, 0x2584, 0x258C, 0x2590, 0x2580, + 0x03B1, 0x00DF, 0x0393, 0x03C0, 0x03A3, 0x03C3, 0x00B5, 0x03C4, 0x03A6, 0x0398, 0x03A9, 0x03B4, 0x221E, 0x03C6, 0x03B5, 0x2219, + 0x2261, 0x00B1, 0x2265, 0x2264, 0x2320, 0x2321, 0x00F7, 0x2248, 0x00B0, 0x2219, 0x00B7, 0x221A, 0x207F, 0x00B2, 0x25A0, 0x00A0 +}; + +#elif _CODE_PAGE == 864 +#define _TBLDEF 1 +static +const WCHAR Tbl[] = { /* CP864(0x80-0xFF) to Unicode conversion table */ + 0x00B0, 0x00B7, 0x2219, 0x221A, 0x2592, 0x2500, 0x2502, 0x253C, 0x2524, 0x252C, 0x251C, 0x2534, 0x2510, 0x250C, 0x2514, 0x2518, + 0x03B2, 0x221E, 0x03C6, 0x00B1, 0x00BD, 0x00BC, 0x2248, 0x00AB, 0x00BB, 0xFEF7, 0xFEF8, 0x0000, 0x0000, 0xFEFB, 0xFEFC, 0x0000, + 0x00A0, 0x00AD, 0xFE82, 0x00A3, 0x00A4, 0xFE84, 0x0000, 0x20AC, 0xFE8E, 0xFE8F, 0xFE95, 0xFE99, 0x060C, 0xFE9D, 0xFEA1, 0xFEA5, + 0x0660, 0x0661, 0x0662, 0x0663, 0x0664, 0x0665, 0x0666, 0x0667, 0x0668, 0x0669, 0xFED1, 0x061B, 0xFEB1, 0xFEB5, 0xFEB9, 0x061F, + 0x00A2, 0xFE80, 0xFE81, 0xFE83, 0xFE85, 0xFECA, 0xFE8B, 0xFE8D, 0xFE91, 0xFE93, 0xFE97, 0xFE9B, 0xFE9F, 0xFEA3, 0xFEA7, 0xFEA9, + 0xFEAB, 0xFEAD, 0xFEAF, 0xFEB3, 0xFEB7, 0xFEBB, 0xFEBF, 0xFEC1, 0xFEC5, 0xFECB, 0xFECF, 0x00A6, 0x00AC, 0x00F7, 0x00D7, 0xFEC9, + 0x0640, 0xFED3, 0xFED7, 0xFEDB, 0xFEDF, 0xFEE3, 0xFEE7, 0xFEEB, 0xFEED, 0xFEEF, 0xFEF3, 0xFEBD, 0xFECC, 0xFECE, 0xFECD, 0xFEE1, + 0xFE7D, 0x0651, 0xFEE5, 0xFEE9, 0xFEEC, 0xFEF0, 0xFEF2, 0xFED0, 0xFED5, 0xFEF5, 0xFEF6, 0xFEDD, 0xFED9, 0xFEF1, 0x25A0, 0x0000 +}; + +#elif _CODE_PAGE == 865 +#define _TBLDEF 1 +static +const WCHAR Tbl[] = { /* CP865(0x80-0xFF) to Unicode conversion table */ + 0x00C7, 0x00FC, 0x00E9, 0x00E2, 0x00E4, 0x00E0, 0x00E5, 0x00E7, 0x00EA, 0x00EB, 0x00E8, 0x00EF, 0x00EE, 0x00EC, 0x00C4, 0x00C5, + 0x00C5, 0x00E6, 0x00C6, 0x00F4, 0x00F6, 0x00F2, 0x00FB, 0x00F9, 0x00FF, 0x00D6, 0x00DC, 0x00F8, 0x00A3, 0x00D8, 0x20A7, 0x0192, + 0x00E1, 0x00ED, 0x00F3, 0x00FA, 0x00F1, 0x00D1, 0x00AA, 0x00BA, 0x00BF, 0x2310, 0x00AC, 0x00BD, 0x00BC, 0x00A1, 0x00AB, 0x00A4, + 0x2591, 0x2592, 0x2593, 0x2502, 0x2524, 0x2561, 0x2562, 0x2556, 0x2555, 0x2563, 0x2551, 0x2557, 0x255D, 0x255C, 0x2558, 0x2510, + 0x2514, 0x2534, 0x252C, 0x251C, 0x2500, 0x253C, 0x255E, 0x255F, 0x255A, 0x2554, 0x2569, 0x2566, 0x2560, 0x2550, 0x256C, 0x2567, + 0x2568, 0x2564, 0x2565, 0x2559, 0x2558, 0x2552, 0x2553, 0x256B, 0x256A, 0x2518, 0x250C, 0x2588, 0x2584, 0x258C, 0x2590, 0x2580, + 0x03B1, 0x00DF, 0x0393, 0x03C0, 0x03A3, 0x03C3, 0x00B5, 0x03C4, 0x03A6, 0x0398, 0x03A9, 0x03B4, 0x221E, 0x03C6, 0x03B5, 0x2229, + 0x2261, 0x00B1, 0x2265, 0x2264, 0x2320, 0x2321, 0x00F7, 0x2248, 0x00B0, 0x2219, 0x00B7, 0x221A, 0x207F, 0x00B2, 0x25A0, 0x00A0 +}; + +#elif _CODE_PAGE == 866 +#define _TBLDEF 1 +static +const WCHAR Tbl[] = { /* CP866(0x80-0xFF) to Unicode conversion table */ + 0x0410, 0x0411, 0x0412, 0x0413, 0x0414, 0x0415, 0x0416, 0x0417, 0x0418, 0x0419, 0x041A, 0x041B, 0x041C, 0x041D, 0x041E, 0x041F, + 0x0420, 0x0421, 0x0422, 0x0423, 0x0424, 0x0425, 0x0426, 0x0427, 0x0428, 0x0429, 0x042A, 0x042B, 0x042C, 0x042D, 0x042E, 0x042F, + 0x0430, 0x0431, 0x0432, 0x0433, 0x0434, 0x0435, 0x0436, 0x0437, 0x0438, 0x0439, 0x043A, 0x043B, 0x043C, 0x043D, 0x043E, 0x043F, + 0x2591, 0x2592, 0x2593, 0x2502, 0x2524, 0x2561, 0x2562, 0x2556, 0x2555, 0x2563, 0x2551, 0x2557, 0x255D, 0x255C, 0x255B, 0x2510, + 0x2514, 0x2534, 0x252C, 0x251C, 0x2500, 0x253C, 0x255E, 0x255F, 0x255A, 0x2554, 0x2569, 0x2566, 0x2560, 0x2550, 0x256C, 0x2567, + 0x2568, 0x2564, 0x2565, 0x2559, 0x2558, 0x2552, 0x2553, 0x256B, 0x256A, 0x2518, 0x250C, 0x2588, 0x2584, 0x258C, 0x2590, 0x2580, + 0x0440, 0x0441, 0x0442, 0x0443, 0x0444, 0x0445, 0x0446, 0x0447, 0x0448, 0x0449, 0x044A, 0x044B, 0x044C, 0x044D, 0x044E, 0x044F, + 0x0401, 0x0451, 0x0404, 0x0454, 0x0407, 0x0457, 0x040E, 0x045E, 0x00B0, 0x2219, 0x00B7, 0x221A, 0x2116, 0x00A4, 0x25A0, 0x00A0 +}; + +#elif _CODE_PAGE == 869 +#define _TBLDEF 1 +static +const WCHAR Tbl[] = { /* CP869(0x80-0xFF) to Unicode conversion table */ + 0x00B7, 0x00B7, 0x00B7, 0x00B7, 0x00B7, 0x00B7, 0x0386, 0x00B7, 0x00B7, 0x00AC, 0x00A6, 0x2018, 0x2019, 0x0388, 0x2015, 0x0389, + 0x038A, 0x03AA, 0x038C, 0x00B7, 0x00B7, 0x038E, 0x03AB, 0x00A9, 0x038F, 0x00B2, 0x00B3, 0x03AC, 0x00A3, 0x03AD, 0x03AE, 0x03AF, + 0x03CA, 0x0390, 0x03CC, 0x03CD, 0x0391, 0x0392, 0x0393, 0x0394, 0x0395, 0x0396, 0x0397, 0x00BD, 0x0398, 0x0399, 0x00AB, 0x00BB, + 0x2591, 0x2592, 0x2593, 0x2502, 0x2524, 0x039A, 0x039B, 0x039C, 0x039D, 0x2563, 0x2551, 0x2557, 0x255D, 0x039E, 0x039F, 0x2510, + 0x2514, 0x2534, 0x252C, 0x251C, 0x2500, 0x253C, 0x0A30, 0x03A1, 0x255A, 0x2554, 0x2569, 0x2566, 0x2560, 0x2550, 0x256C, 0x03A3, + 0x03A4, 0x03A5, 0x03A6, 0x03A7, 0x03A8, 0x03A9, 0x03B1, 0x03B2, 0x03B3, 0x2518, 0x250C, 0x2588, 0x2584, 0x03B4, 0x03B5, 0x2580, + 0x03B6, 0x03B7, 0x03B8, 0x03B9, 0x03BA, 0x03BB, 0x03BC, 0x03BD, 0x03BE, 0x03BF, 0x03C0, 0x03C1, 0x03C3, 0x03C2, 0x03C4, 0x0384, + 0x00AD, 0x00B1, 0x03C5, 0x03C6, 0x03C7, 0x00A7, 0x03C8, 0x0385, 0x00B0, 0x00A8, 0x03C9, 0x03CB, 0x03B0, 0x03CE, 0x25A0, 0x00A0 +}; + +#endif + + +#if !_TBLDEF || !_USE_LFN +#error This file is not needed at current configuration. Remove from the project. +#endif + + + + +WCHAR ff_convert ( /* Converted character, Returns zero on error */ + WCHAR chr, /* Character code to be converted */ + UINT dir /* 0: Unicode to OEM code, 1: OEM code to Unicode */ +) +{ + WCHAR c; + + + if (chr < 0x80) { /* ASCII */ + c = chr; + + } else { + if (dir) { /* OEM code to Unicode */ + c = (chr >= 0x100) ? 0 : Tbl[chr - 0x80]; + + } else { /* Unicode to OEM code */ + for (c = 0; c < 0x80; c++) { + if (chr == Tbl[c]) break; + } + c = (c + 0x80) & 0xFF; + } + } + + return c; +} + + + +WCHAR ff_wtoupper ( /* Returns upper converted character */ + WCHAR chr /* Unicode character to be upper converted (BMP only) */ +) +{ + /* Compressed upper conversion table */ + static const WCHAR cvt1[] = { /* U+0000 - U+0FFF */ + /* Basic Latin */ + 0x0061,0x031A, + /* Latin-1 Supplement */ + 0x00E0,0x0317, 0x00F8,0x0307, 0x00FF,0x0001,0x0178, + /* Latin Extended-A */ + 0x0100,0x0130, 0x0132,0x0106, 0x0139,0x0110, 0x014A,0x012E, 0x0179,0x0106, + /* Latin Extended-B */ + 0x0180,0x004D,0x0243,0x0181,0x0182,0x0182,0x0184,0x0184,0x0186,0x0187,0x0187,0x0189,0x018A,0x018B,0x018B,0x018D,0x018E,0x018F,0x0190,0x0191,0x0191,0x0193,0x0194,0x01F6,0x0196,0x0197,0x0198,0x0198,0x023D,0x019B,0x019C,0x019D,0x0220,0x019F,0x01A0,0x01A0,0x01A2,0x01A2,0x01A4,0x01A4,0x01A6,0x01A7,0x01A7,0x01A9,0x01AA,0x01AB,0x01AC,0x01AC,0x01AE,0x01AF,0x01AF,0x01B1,0x01B2,0x01B3,0x01B3,0x01B5,0x01B5,0x01B7,0x01B8,0x01B8,0x01BA,0x01BB,0x01BC,0x01BC,0x01BE,0x01F7,0x01C0,0x01C1,0x01C2,0x01C3,0x01C4,0x01C5,0x01C4,0x01C7,0x01C8,0x01C7,0x01CA,0x01CB,0x01CA, + 0x01CD,0x0110, 0x01DD,0x0001,0x018E, 0x01DE,0x0112, 0x01F3,0x0003,0x01F1,0x01F4,0x01F4, 0x01F8,0x0128, + 0x0222,0x0112, 0x023A,0x0009,0x2C65,0x023B,0x023B,0x023D,0x2C66,0x023F,0x0240,0x0241,0x0241, 0x0246,0x010A, + /* IPA Extensions */ + 0x0253,0x0040,0x0181,0x0186,0x0255,0x0189,0x018A,0x0258,0x018F,0x025A,0x0190,0x025C,0x025D,0x025E,0x025F,0x0193,0x0261,0x0262,0x0194,0x0264,0x0265,0x0266,0x0267,0x0197,0x0196,0x026A,0x2C62,0x026C,0x026D,0x026E,0x019C,0x0270,0x0271,0x019D,0x0273,0x0274,0x019F,0x0276,0x0277,0x0278,0x0279,0x027A,0x027B,0x027C,0x2C64,0x027E,0x027F,0x01A6,0x0281,0x0282,0x01A9,0x0284,0x0285,0x0286,0x0287,0x01AE,0x0244,0x01B1,0x01B2,0x0245,0x028D,0x028E,0x028F,0x0290,0x0291,0x01B7, + /* Greek, Coptic */ + 0x037B,0x0003,0x03FD,0x03FE,0x03FF, 0x03AC,0x0004,0x0386,0x0388,0x0389,0x038A, 0x03B1,0x0311, + 0x03C2,0x0002,0x03A3,0x03A3, 0x03C4,0x0308, 0x03CC,0x0003,0x038C,0x038E,0x038F, 0x03D8,0x0118, + 0x03F2,0x000A,0x03F9,0x03F3,0x03F4,0x03F5,0x03F6,0x03F7,0x03F7,0x03F9,0x03FA,0x03FA, + /* Cyrillic */ + 0x0430,0x0320, 0x0450,0x0710, 0x0460,0x0122, 0x048A,0x0136, 0x04C1,0x010E, 0x04CF,0x0001,0x04C0, 0x04D0,0x0144, + /* Armenian */ + 0x0561,0x0426, + + 0x0000 + }; + static const WCHAR cvt2[] = { /* U+1000 - U+FFFF */ + /* Phonetic Extensions */ + 0x1D7D,0x0001,0x2C63, + /* Latin Extended Additional */ + 0x1E00,0x0196, 0x1EA0,0x015A, + /* Greek Extended */ + 0x1F00,0x0608, 0x1F10,0x0606, 0x1F20,0x0608, 0x1F30,0x0608, 0x1F40,0x0606, + 0x1F51,0x0007,0x1F59,0x1F52,0x1F5B,0x1F54,0x1F5D,0x1F56,0x1F5F, 0x1F60,0x0608, + 0x1F70,0x000E,0x1FBA,0x1FBB,0x1FC8,0x1FC9,0x1FCA,0x1FCB,0x1FDA,0x1FDB,0x1FF8,0x1FF9,0x1FEA,0x1FEB,0x1FFA,0x1FFB, + 0x1F80,0x0608, 0x1F90,0x0608, 0x1FA0,0x0608, 0x1FB0,0x0004,0x1FB8,0x1FB9,0x1FB2,0x1FBC, + 0x1FCC,0x0001,0x1FC3, 0x1FD0,0x0602, 0x1FE0,0x0602, 0x1FE5,0x0001,0x1FEC, 0x1FF2,0x0001,0x1FFC, + /* Letterlike Symbols */ + 0x214E,0x0001,0x2132, + /* Number forms */ + 0x2170,0x0210, 0x2184,0x0001,0x2183, + /* Enclosed Alphanumerics */ + 0x24D0,0x051A, 0x2C30,0x042F, + /* Latin Extended-C */ + 0x2C60,0x0102, 0x2C67,0x0106, 0x2C75,0x0102, + /* Coptic */ + 0x2C80,0x0164, + /* Georgian Supplement */ + 0x2D00,0x0826, + /* Full-width */ + 0xFF41,0x031A, + + 0x0000 + }; + const WCHAR *p; + WCHAR bc, nc, cmd; + + + p = chr < 0x1000 ? cvt1 : cvt2; + for (;;) { + bc = *p++; /* Get block base */ + if (!bc || chr < bc) break; + nc = *p++; cmd = nc >> 8; nc &= 0xFF; /* Get processing command and block size */ + if (chr < bc + nc) { /* In the block? */ + switch (cmd) { + case 0: chr = p[chr - bc]; break; /* Table conversion */ + case 1: chr -= (chr - bc) & 1; break; /* Case pairs */ + case 2: chr -= 16; break; /* Shift -16 */ + case 3: chr -= 32; break; /* Shift -32 */ + case 4: chr -= 48; break; /* Shift -48 */ + case 5: chr -= 26; break; /* Shift -26 */ + case 6: chr += 8; break; /* Shift +8 */ + case 7: chr -= 80; break; /* Shift -80 */ + case 8: chr -= 0x1C60; break; /* Shift -0x1C60 */ + } + break; + } + if (!cmd) p += nc; + } + + return chr; +} + diff --git a/Middlewares/Third_Party/FatFs/src/option/syscall.c b/Middlewares/Third_Party/FatFs/src/option/syscall.c new file mode 100644 index 0000000..11ae7b4 --- /dev/null +++ b/Middlewares/Third_Party/FatFs/src/option/syscall.c @@ -0,0 +1,164 @@ +/*------------------------------------------------------------------------*/ +/* Sample code of OS dependent controls for FatFs */ +/* (C)ChaN, 2014 */ +/* Portions COPYRIGHT 2017 STMicroelectronics */ +/* Portions Copyright (C) 2014, ChaN, all right reserved */ +/*------------------------------------------------------------------------*/ + +/** + ****************************************************************************** + * + *

© Copyright (c) 2017 STMicroelectronics International N.V. + * All rights reserved.

+ * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted, provided that the following conditions are met: + * + * 1. Redistribution of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of other + * contributors to this software may be used to endorse or promote products + * derived from this software without specific written permission. + * 4. This software, including modifications and/or derivative works of this + * software, must execute solely and exclusively on microcontroller or + * microprocessor devices manufactured by or for STMicroelectronics. + * 5. Redistribution and use of this software other than as permitted under + * this license is void and will automatically terminate your rights under + * this license. + * + * THIS SOFTWARE IS PROVIDED BY STMICROELECTRONICS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS, IMPLIED OR STATUTORY WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A + * PARTICULAR PURPOSE AND NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY + * RIGHTS ARE DISCLAIMED TO THE FULLEST EXTENT PERMITTED BY LAW. IN NO EVENT + * SHALL STMICROELECTRONICS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, + * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF + * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING + * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, + * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + + + +#include "../ff.h" + + +#if _FS_REENTRANT +/*------------------------------------------------------------------------*/ +/* Create a Synchronization Object */ +/*------------------------------------------------------------------------*/ +/* This function is called in f_mount() function to create a new +/ synchronization object, such as semaphore and mutex. When a 0 is returned, +/ the f_mount() function fails with FR_INT_ERR. +*/ + +int ff_cre_syncobj ( /* 1:Function succeeded, 0:Could not create the sync object */ + BYTE vol, /* Corresponding volume (logical drive number) */ + _SYNC_t *sobj /* Pointer to return the created sync object */ +) +{ + + int ret; + + osSemaphoreDef(SEM); + *sobj = osSemaphoreCreate(osSemaphore(SEM), 1); + ret = (*sobj != NULL); + + return ret; +} + + + +/*------------------------------------------------------------------------*/ +/* Delete a Synchronization Object */ +/*------------------------------------------------------------------------*/ +/* This function is called in f_mount() function to delete a synchronization +/ object that created with ff_cre_syncobj() function. When a 0 is returned, +/ the f_mount() function fails with FR_INT_ERR. +*/ + +int ff_del_syncobj ( /* 1:Function succeeded, 0:Could not delete due to any error */ + _SYNC_t sobj /* Sync object tied to the logical drive to be deleted */ +) +{ + osSemaphoreDelete (sobj); + return 1; +} + + + +/*------------------------------------------------------------------------*/ +/* Request Grant to Access the Volume */ +/*------------------------------------------------------------------------*/ +/* This function is called on entering file functions to lock the volume. +/ When a 0 is returned, the file function fails with FR_TIMEOUT. +*/ + +int ff_req_grant ( /* 1:Got a grant to access the volume, 0:Could not get a grant */ + _SYNC_t sobj /* Sync object to wait */ +) +{ + int ret = 0; + + if(osSemaphoreWait(sobj, _FS_TIMEOUT) == osOK) + { + ret = 1; + } + + return ret; +} + + + +/*------------------------------------------------------------------------*/ +/* Release Grant to Access the Volume */ +/*------------------------------------------------------------------------*/ +/* This function is called on leaving file functions to unlock the volume. +*/ + +void ff_rel_grant ( + _SYNC_t sobj /* Sync object to be signaled */ +) +{ + osSemaphoreRelease(sobj); +} + +#endif + + + + +#if _USE_LFN == 3 /* LFN with a working buffer on the heap */ +/*------------------------------------------------------------------------*/ +/* Allocate a memory block */ +/*------------------------------------------------------------------------*/ +/* If a NULL is returned, the file function fails with FR_NOT_ENOUGH_CORE. +*/ + +void* ff_memalloc ( /* Returns pointer to the allocated memory block */ + UINT msize /* Number of bytes to allocate */ +) +{ + return ff_malloc(msize); /* Allocate a new memory block with POSIX API */ +} + + +/*------------------------------------------------------------------------*/ +/* Free a memory block */ +/*------------------------------------------------------------------------*/ + +void ff_memfree ( + void* mblock /* Pointer to the memory block to free */ +) +{ + ff_free(mblock); /* Discard the memory block with POSIX API */ +} + +#endif diff --git a/Src/bsp_driver_sd.c b/Src/bsp_driver_sd.c new file mode 100644 index 0000000..25c461b --- /dev/null +++ b/Src/bsp_driver_sd.c @@ -0,0 +1,342 @@ +/** + ****************************************************************************** + * @file bsp_driver_sd.c for F4 (based on stm324x9i_eval_sd.c) + * @brief This file includes a generic uSD card driver. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2019 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under Ultimate Liberty license + * SLA0044, the "License"; You may not use this file except in compliance with + * the License. You may obtain a copy of the License at: + * www.st.com/SLA0044 + * + ****************************************************************************** + */ + +#ifdef OLD_API +/* kept to avoid issue when migrating old projects. */ +/* USER CODE BEGIN 0 */ + +/* USER CODE END 0 */ +#else +/* USER CODE BEGIN FirstSection */ +/* can be used to modify / undefine following code or add new definitions */ +/* USER CODE END FirstSection */ +/* Includes ------------------------------------------------------------------*/ +#include "bsp_driver_sd.h" + +/* Extern variables ---------------------------------------------------------*/ + +extern SD_HandleTypeDef hsd; + +/* USER CODE BEGIN BeforeInitSection */ +/* can be used to modify / undefine following code or add code */ +/* USER CODE END BeforeInitSection */ +/** + * @brief Initializes the SD card device. + * @retval SD status + */ +uint8_t BSP_SD_Init(void) +{ + uint8_t sd_state = MSD_OK; + /* Check if the SD card is plugged in the slot */ + if (BSP_SD_IsDetected() != SD_PRESENT) + { + return MSD_ERROR; + } + /* HAL SD initialization */ + sd_state = HAL_SD_Init(&hsd); + /* Configure SD Bus width (4 bits mode selected) */ + if (sd_state == MSD_OK) + { + /* Enable wide operation */ + if (HAL_SD_ConfigWideBusOperation(&hsd, SDIO_BUS_WIDE_4B) != HAL_OK) + { + sd_state = MSD_ERROR; + } + } + + return sd_state; +} +/* USER CODE BEGIN AfterInitSection */ +/* can be used to modify previous code / undefine following code / add code */ +/* USER CODE END AfterInitSection */ + +/** + * @brief Configures Interrupt mode for SD detection pin. + * @retval Returns 0 in success otherwise 1. + */ +uint8_t BSP_SD_ITConfig(void) +{ + /* TBI: add user code here depending on the hardware configuration used */ + + return (uint8_t)0; +} + +/** @brief SD detect IT treatment + */ +void BSP_SD_DetectIT(void) +{ + /* TBI: add user code here depending on the hardware configuration used */ +} + +/** @brief SD detect IT detection callback + */ +__weak void BSP_SD_DetectCallback(void) +{ + /* NOTE: This function Should not be modified, when the callback is needed, + the BSP_SD_DetectCallback could be implemented in the user file + */ +} + +/* USER CODE BEGIN BeforeReadBlocksSection */ +/* can be used to modify previous code / undefine following code / add code */ +/* USER CODE END BeforeReadBlocksSection */ +/** + * @brief Reads block(s) from a specified address in an SD card, in polling mode. + * @param pData: Pointer to the buffer that will contain the data to transmit + * @param ReadAddr: Address from where data is to be read + * @param NumOfBlocks: Number of SD blocks to read + * @param Timeout: Timeout for read operation + * @retval SD status + */ +uint8_t BSP_SD_ReadBlocks(uint32_t *pData, uint32_t ReadAddr, uint32_t NumOfBlocks, uint32_t Timeout) +{ + uint8_t sd_state = MSD_OK; + + if (HAL_SD_ReadBlocks(&hsd, (uint8_t *)pData, ReadAddr, NumOfBlocks, Timeout) != HAL_OK) + { + sd_state = MSD_ERROR; + } + + return sd_state; +} + +/* USER CODE BEGIN BeforeWriteBlocksSection */ +/* can be used to modify previous code / undefine following code / add code */ +/* USER CODE END BeforeWriteBlocksSection */ +/** + * @brief Writes block(s) to a specified address in an SD card, in polling mode. + * @param pData: Pointer to the buffer that will contain the data to transmit + * @param WriteAddr: Address from where data is to be written + * @param NumOfBlocks: Number of SD blocks to write + * @param Timeout: Timeout for write operation + * @retval SD status + */ +uint8_t BSP_SD_WriteBlocks(uint32_t *pData, uint32_t WriteAddr, uint32_t NumOfBlocks, uint32_t Timeout) +{ + uint8_t sd_state = MSD_OK; + + if (HAL_SD_WriteBlocks(&hsd, (uint8_t *)pData, WriteAddr, NumOfBlocks, Timeout) != HAL_OK) + { + sd_state = MSD_ERROR; + } + + return sd_state; +} + +/* USER CODE BEGIN BeforeReadDMABlocksSection */ +/* can be used to modify previous code / undefine following code / add code */ +/* USER CODE END BeforeReadDMABlocksSection */ +/** + * @brief Reads block(s) from a specified address in an SD card, in DMA mode. + * @param pData: Pointer to the buffer that will contain the data to transmit + * @param ReadAddr: Address from where data is to be read + * @param NumOfBlocks: Number of SD blocks to read + * @retval SD status + */ +uint8_t BSP_SD_ReadBlocks_DMA(uint32_t *pData, uint32_t ReadAddr, uint32_t NumOfBlocks) +{ + uint8_t sd_state = MSD_OK; + + /* Read block(s) in DMA transfer mode */ + if (HAL_SD_ReadBlocks_DMA(&hsd, (uint8_t *)pData, ReadAddr, NumOfBlocks) != HAL_OK) + { + sd_state = MSD_ERROR; + } + + return sd_state; +} + +/* USER CODE BEGIN BeforeWriteDMABlocksSection */ +/* can be used to modify previous code / undefine following code / add code */ +/* USER CODE END BeforeWriteDMABlocksSection */ +/** + * @brief Writes block(s) to a specified address in an SD card, in DMA mode. + * @param pData: Pointer to the buffer that will contain the data to transmit + * @param WriteAddr: Address from where data is to be written + * @param NumOfBlocks: Number of SD blocks to write + * @retval SD status + */ +uint8_t BSP_SD_WriteBlocks_DMA(uint32_t *pData, uint32_t WriteAddr, uint32_t NumOfBlocks) +{ + uint8_t sd_state = MSD_OK; + + /* Write block(s) in DMA transfer mode */ + if (HAL_SD_WriteBlocks_DMA(&hsd, (uint8_t *)pData, WriteAddr, NumOfBlocks) != HAL_OK) + { + sd_state = MSD_ERROR; + } + + return sd_state; +} + +/* USER CODE BEGIN BeforeEraseSection */ +/* can be used to modify previous code / undefine following code / add code */ +/* USER CODE END BeforeEraseSection */ +/** + * @brief Erases the specified memory area of the given SD card. + * @param StartAddr: Start byte address + * @param EndAddr: End byte address + * @retval SD status + */ +uint8_t BSP_SD_Erase(uint32_t StartAddr, uint32_t EndAddr) +{ + uint8_t sd_state = MSD_OK; + + if (HAL_SD_Erase(&hsd, StartAddr, EndAddr) != HAL_OK) + { + sd_state = MSD_ERROR; + } + + return sd_state; +} + +/* USER CODE BEGIN BeforeHandlersSection */ +/* can be used to modify previous code / undefine following code / add code */ +/* USER CODE END BeforeHandlersSection */ +/** + * @brief Handles SD card interrupt request. + */ +void BSP_SD_IRQHandler(void) +{ + HAL_SD_IRQHandler(&hsd); +} + +/** + * @brief Handles SD DMA Tx transfer interrupt request. + */ +void BSP_SD_DMA_Tx_IRQHandler(void) +{ + HAL_DMA_IRQHandler(hsd.hdmatx); +} + +/** + * @brief Handles SD DMA Rx transfer interrupt request. + */ +void BSP_SD_DMA_Rx_IRQHandler(void) +{ + HAL_DMA_IRQHandler(hsd.hdmarx); +} + +/** + * @brief Gets the current SD card data status. + * @param None + * @retval Data transfer state. + * This value can be one of the following values: + * @arg SD_TRANSFER_OK: No data transfer is acting + * @arg SD_TRANSFER_BUSY: Data transfer is acting + */ +uint8_t BSP_SD_GetCardState(void) +{ + return ((HAL_SD_GetCardState(&hsd) == HAL_SD_CARD_TRANSFER ) ? SD_TRANSFER_OK : SD_TRANSFER_BUSY); +} + +/** + * @brief Get SD information about specific SD card. + * @param CardInfo: Pointer to HAL_SD_CardInfoTypedef structure + * @retval None + */ +void BSP_SD_GetCardInfo(HAL_SD_CardInfoTypeDef *CardInfo) +{ + /* Get SD card Information */ + HAL_SD_GetCardInfo(&hsd, CardInfo); +} + +/* USER CODE BEGIN BeforeCallBacksSection */ +/* can be used to modify previous code / undefine following code / add code */ +/* USER CODE END BeforeCallBacksSection */ +/** + * @brief SD Abort callbacks + * @param hsd: SD handle + * @retval None + */ +void HAL_SD_AbortCallback(SD_HandleTypeDef *hsd) +{ + BSP_SD_AbortCallback(); +} + +/** + * @brief Tx Transfer completed callback + * @param hsd: SD handle + * @retval None + */ +void HAL_SD_TxCpltCallback(SD_HandleTypeDef *hsd) +{ + BSP_SD_WriteCpltCallback(); +} + +/** + * @brief Rx Transfer completed callback + * @param hsd: SD handle + * @retval None + */ +void HAL_SD_RxCpltCallback(SD_HandleTypeDef *hsd) +{ + BSP_SD_ReadCpltCallback(); +} + +/* USER CODE BEGIN CallBacksSection_C */ +/** + * @brief BSP SD Abort callback + * @retval None + */ +__weak void BSP_SD_AbortCallback(void) +{ + +} + +/** + * @brief BSP Tx Transfer completed callback + * @retval None + */ +__weak void BSP_SD_WriteCpltCallback(void) +{ + +} + +/** + * @brief BSP Rx Transfer completed callback + * @retval None + */ +__weak void BSP_SD_ReadCpltCallback(void) +{ + +} +/* USER CODE END CallBacksSection_C */ +#endif + +/** + * @brief Detects if SD card is correctly plugged in the memory slot or not. + * @param None + * @retval Returns if SD is detected or not + */ +uint8_t BSP_SD_IsDetected(void) +{ + __IO uint8_t status = SD_PRESENT; + + /* USER CODE BEGIN 1 */ + /* user code can be inserted here */ + /* USER CODE END 1 */ + + return status; +} + +/* USER CODE BEGIN AdditionalCode */ +/* user code can be inserted here */ +/* USER CODE END AdditionalCode */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/Src/crc.c b/Src/crc.c index b761ba8..69fd633 100644 --- a/Src/crc.c +++ b/Src/crc.c @@ -9,10 +9,10 @@ *

© Copyright (c) 2019 STMicroelectronics. * All rights reserved.

* - * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the - * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause + * This software component is licensed by ST under Ultimate Liberty license + * SLA0044, the "License"; You may not use this file except in compliance with + * the License. You may obtain a copy of the License at: + * www.st.com/SLA0044 * ****************************************************************************** */ diff --git a/Src/dma.c b/Src/dma.c index 0a70083..3c690e7 100644 --- a/Src/dma.c +++ b/Src/dma.c @@ -9,10 +9,10 @@ *

© Copyright (c) 2019 STMicroelectronics. * All rights reserved.

* - * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the - * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause + * This software component is licensed by ST under Ultimate Liberty license + * SLA0044, the "License"; You may not use this file except in compliance with + * the License. You may obtain a copy of the License at: + * www.st.com/SLA0044 * ****************************************************************************** */ @@ -81,48 +81,45 @@ void MX_DMA_Init(void) /* Set peripheral burst size */ LL_DMA_SetPeriphBurstxfer(DMA2, LL_DMA_STREAM_4, LL_DMA_PBURST_SINGLE); - /* Configure DMA request MEMTOMEM_DMA2_Stream0 */ + /* Configure DMA request MEMTOMEM_DMA2_Stream3 */ /* Select channel */ - LL_DMA_SetChannelSelection(DMA2, LL_DMA_STREAM_0, LL_DMA_CHANNEL_0); + LL_DMA_SetChannelSelection(DMA2, LL_DMA_STREAM_3, LL_DMA_CHANNEL_0); /* Set transfer direction */ - LL_DMA_SetDataTransferDirection(DMA2, LL_DMA_STREAM_0, LL_DMA_DIRECTION_MEMORY_TO_MEMORY); + LL_DMA_SetDataTransferDirection(DMA2, LL_DMA_STREAM_3, LL_DMA_DIRECTION_MEMORY_TO_MEMORY); /* Set priority level */ - LL_DMA_SetStreamPriorityLevel(DMA2, LL_DMA_STREAM_0, LL_DMA_PRIORITY_LOW); + LL_DMA_SetStreamPriorityLevel(DMA2, LL_DMA_STREAM_3, LL_DMA_PRIORITY_LOW); /* Set DMA mode */ - LL_DMA_SetMode(DMA2, LL_DMA_STREAM_0, LL_DMA_MODE_NORMAL); + LL_DMA_SetMode(DMA2, LL_DMA_STREAM_3, LL_DMA_MODE_NORMAL); /* Set peripheral increment mode */ - LL_DMA_SetPeriphIncMode(DMA2, LL_DMA_STREAM_0, LL_DMA_PERIPH_INCREMENT); + LL_DMA_SetPeriphIncMode(DMA2, LL_DMA_STREAM_3, LL_DMA_PERIPH_INCREMENT); /* Set memory increment mode */ - LL_DMA_SetMemoryIncMode(DMA2, LL_DMA_STREAM_0, LL_DMA_MEMORY_INCREMENT); + LL_DMA_SetMemoryIncMode(DMA2, LL_DMA_STREAM_3, LL_DMA_MEMORY_INCREMENT); /* Set peripheral data width */ - LL_DMA_SetPeriphSize(DMA2, LL_DMA_STREAM_0, LL_DMA_PDATAALIGN_WORD); + LL_DMA_SetPeriphSize(DMA2, LL_DMA_STREAM_3, LL_DMA_PDATAALIGN_WORD); /* Set memory data width */ - LL_DMA_SetMemorySize(DMA2, LL_DMA_STREAM_0, LL_DMA_MDATAALIGN_WORD); + LL_DMA_SetMemorySize(DMA2, LL_DMA_STREAM_3, LL_DMA_MDATAALIGN_WORD); /* Enable FIFO mode */ - LL_DMA_EnableFifoMode(DMA2, LL_DMA_STREAM_0); + LL_DMA_EnableFifoMode(DMA2, LL_DMA_STREAM_3); /* Set FIFO threshold */ - LL_DMA_SetFIFOThreshold(DMA2, LL_DMA_STREAM_0, LL_DMA_FIFOTHRESHOLD_FULL); + LL_DMA_SetFIFOThreshold(DMA2, LL_DMA_STREAM_3, LL_DMA_FIFOTHRESHOLD_FULL); /* Set memory burst size */ - LL_DMA_SetMemoryBurstxfer(DMA2, LL_DMA_STREAM_0, LL_DMA_MBURST_SINGLE); + LL_DMA_SetMemoryBurstxfer(DMA2, LL_DMA_STREAM_3, LL_DMA_MBURST_SINGLE); /* Set peripheral burst size */ - LL_DMA_SetPeriphBurstxfer(DMA2, LL_DMA_STREAM_0, LL_DMA_PBURST_SINGLE); + LL_DMA_SetPeriphBurstxfer(DMA2, LL_DMA_STREAM_3, LL_DMA_PBURST_SINGLE); /* DMA interrupt init */ - /* DMA1_Stream0_IRQn interrupt configuration */ - NVIC_SetPriority(DMA1_Stream0_IRQn, NVIC_EncodePriority(NVIC_GetPriorityGrouping(),0, 0)); - NVIC_EnableIRQ(DMA1_Stream0_IRQn); /* DMA1_Stream1_IRQn interrupt configuration */ NVIC_SetPriority(DMA1_Stream1_IRQn, NVIC_EncodePriority(NVIC_GetPriorityGrouping(),0, 0)); NVIC_EnableIRQ(DMA1_Stream1_IRQn); @@ -141,9 +138,6 @@ void MX_DMA_Init(void) /* DMA1_Stream6_IRQn interrupt configuration */ NVIC_SetPriority(DMA1_Stream6_IRQn, NVIC_EncodePriority(NVIC_GetPriorityGrouping(),0, 0)); NVIC_EnableIRQ(DMA1_Stream6_IRQn); - /* DMA1_Stream7_IRQn interrupt configuration */ - NVIC_SetPriority(DMA1_Stream7_IRQn, NVIC_EncodePriority(NVIC_GetPriorityGrouping(),0, 0)); - NVIC_EnableIRQ(DMA1_Stream7_IRQn); /* DMA2_Stream0_IRQn interrupt configuration */ NVIC_SetPriority(DMA2_Stream0_IRQn, NVIC_EncodePriority(NVIC_GetPriorityGrouping(),0, 0)); NVIC_EnableIRQ(DMA2_Stream0_IRQn); @@ -153,9 +147,15 @@ void MX_DMA_Init(void) /* DMA2_Stream2_IRQn interrupt configuration */ NVIC_SetPriority(DMA2_Stream2_IRQn, NVIC_EncodePriority(NVIC_GetPriorityGrouping(),0, 0)); NVIC_EnableIRQ(DMA2_Stream2_IRQn); + /* DMA2_Stream3_IRQn interrupt configuration */ + NVIC_SetPriority(DMA2_Stream3_IRQn, NVIC_EncodePriority(NVIC_GetPriorityGrouping(),0, 0)); + NVIC_EnableIRQ(DMA2_Stream3_IRQn); /* DMA2_Stream4_IRQn interrupt configuration */ NVIC_SetPriority(DMA2_Stream4_IRQn, NVIC_EncodePriority(NVIC_GetPriorityGrouping(),0, 0)); NVIC_EnableIRQ(DMA2_Stream4_IRQn); + /* DMA2_Stream5_IRQn interrupt configuration */ + NVIC_SetPriority(DMA2_Stream5_IRQn, NVIC_EncodePriority(NVIC_GetPriorityGrouping(),0, 0)); + NVIC_EnableIRQ(DMA2_Stream5_IRQn); /* DMA2_Stream6_IRQn interrupt configuration */ NVIC_SetPriority(DMA2_Stream6_IRQn, NVIC_EncodePriority(NVIC_GetPriorityGrouping(),0, 0)); NVIC_EnableIRQ(DMA2_Stream6_IRQn); diff --git a/Src/fatfs.c b/Src/fatfs.c new file mode 100644 index 0000000..fdaff62 --- /dev/null +++ b/Src/fatfs.c @@ -0,0 +1,56 @@ +/** + ****************************************************************************** + * @file fatfs.c + * @brief Code for fatfs applications + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2019 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under Ultimate Liberty license + * SLA0044, the "License"; You may not use this file except in compliance with + * the License. You may obtain a copy of the License at: + * www.st.com/SLA0044 + * + ****************************************************************************** + */ + +#include "fatfs.h" + +uint8_t retSD; /* Return value for SD */ +char SDPath[4]; /* SD logical drive path */ +FATFS SDFatFS; /* File system object for SD logical drive */ +FIL SDFile; /* File object for SD */ + +/* USER CODE BEGIN Variables */ + +/* USER CODE END Variables */ + +void MX_FATFS_Init(void) +{ + /*## FatFS: Link the SD driver ###########################*/ + retSD = FATFS_LinkDriver(&SD_Driver, SDPath); + + /* USER CODE BEGIN Init */ + /* additional user code for init */ + /* USER CODE END Init */ +} + +/** + * @brief Gets Time from RTC + * @param None + * @retval Time in DWORD + */ +DWORD get_fattime(void) +{ + /* USER CODE BEGIN get_fattime */ + return 0; + /* USER CODE END get_fattime */ +} + +/* USER CODE BEGIN Application */ + +/* USER CODE END Application */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/Src/fsmc.c b/Src/fsmc.c new file mode 100644 index 0000000..29cd293 --- /dev/null +++ b/Src/fsmc.c @@ -0,0 +1,209 @@ +/** + ****************************************************************************** + * File Name : FSMC.c + * Description : This file provides code for the configuration + * of the FSMC peripheral. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2019 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under Ultimate Liberty license + * SLA0044, the "License"; You may not use this file except in compliance with + * the License. You may obtain a copy of the License at: + * www.st.com/SLA0044 + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "fsmc.h" + +/* USER CODE BEGIN 0 */ + +/* USER CODE END 0 */ + +SRAM_HandleTypeDef hsram1; + +/* FSMC initialization function */ +void MX_FSMC_Init(void) +{ + FSMC_NORSRAM_TimingTypeDef Timing = {0}; + + /** Perform the SRAM1 memory initialization sequence + */ + hsram1.Instance = FSMC_NORSRAM_DEVICE; + hsram1.Extended = FSMC_NORSRAM_EXTENDED_DEVICE; + /* hsram1.Init */ + hsram1.Init.NSBank = FSMC_NORSRAM_BANK1; + hsram1.Init.DataAddressMux = FSMC_DATA_ADDRESS_MUX_DISABLE; + hsram1.Init.MemoryType = FSMC_MEMORY_TYPE_SRAM; + hsram1.Init.MemoryDataWidth = FSMC_NORSRAM_MEM_BUS_WIDTH_16; + hsram1.Init.BurstAccessMode = FSMC_BURST_ACCESS_MODE_DISABLE; + hsram1.Init.WaitSignalPolarity = FSMC_WAIT_SIGNAL_POLARITY_LOW; + hsram1.Init.WrapMode = FSMC_WRAP_MODE_DISABLE; + hsram1.Init.WaitSignalActive = FSMC_WAIT_TIMING_BEFORE_WS; + hsram1.Init.WriteOperation = FSMC_WRITE_OPERATION_ENABLE; + hsram1.Init.WaitSignal = FSMC_WAIT_SIGNAL_DISABLE; + hsram1.Init.ExtendedMode = FSMC_EXTENDED_MODE_DISABLE; + hsram1.Init.AsynchronousWait = FSMC_ASYNCHRONOUS_WAIT_DISABLE; + hsram1.Init.WriteBurst = FSMC_WRITE_BURST_DISABLE; + hsram1.Init.PageSize = FSMC_PAGE_SIZE_NONE; + /* Timing */ + Timing.AddressSetupTime = 15; + Timing.AddressHoldTime = 15; + Timing.DataSetupTime = 255; + Timing.BusTurnAroundDuration = 15; + Timing.CLKDivision = 16; + Timing.DataLatency = 17; + Timing.AccessMode = FSMC_ACCESS_MODE_A; + /* ExtTiming */ + + if (HAL_SRAM_Init(&hsram1, &Timing, NULL) != HAL_OK) + { + Error_Handler( ); + } + +} + +static uint32_t FSMC_Initialized = 0; + +static void HAL_FSMC_MspInit(void){ + /* USER CODE BEGIN FSMC_MspInit 0 */ + + /* USER CODE END FSMC_MspInit 0 */ + GPIO_InitTypeDef GPIO_InitStruct = {0}; + if (FSMC_Initialized) { + return; + } + FSMC_Initialized = 1; + /* Peripheral clock enable */ + __HAL_RCC_FSMC_CLK_ENABLE(); + + /** FSMC GPIO Configuration + PE7 ------> FSMC_D4 + PE8 ------> FSMC_D5 + PE9 ------> FSMC_D6 + PE10 ------> FSMC_D7 + PE11 ------> FSMC_D8 + PE12 ------> FSMC_D9 + PE13 ------> FSMC_D10 + PE14 ------> FSMC_D11 + PE15 ------> FSMC_D12 + PD8 ------> FSMC_D13 + PD9 ------> FSMC_D14 + PD10 ------> FSMC_D15 + PD13 ------> FSMC_A18 + PD14 ------> FSMC_D0 + PD15 ------> FSMC_D1 + PD0 ------> FSMC_D2 + PD1 ------> FSMC_D3 + PD4 ------> FSMC_NOE + PD5 ------> FSMC_NWE + PD7 ------> FSMC_NE1 + */ + /* GPIO_InitStruct */ + GPIO_InitStruct.Pin = GPIO_PIN_7|GPIO_PIN_8|GPIO_PIN_9|GPIO_PIN_10 + |GPIO_PIN_11|GPIO_PIN_12|GPIO_PIN_13|GPIO_PIN_14 + |GPIO_PIN_15; + GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; + GPIO_InitStruct.Pull = GPIO_NOPULL; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH; + GPIO_InitStruct.Alternate = GPIO_AF12_FSMC; + + HAL_GPIO_Init(GPIOE, &GPIO_InitStruct); + + /* GPIO_InitStruct */ + GPIO_InitStruct.Pin = GPIO_PIN_8|GPIO_PIN_9|GPIO_PIN_10|GPIO_PIN_13 + |GPIO_PIN_14|GPIO_PIN_15|GPIO_PIN_0|GPIO_PIN_1 + |GPIO_PIN_4|GPIO_PIN_5|GPIO_PIN_7; + GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; + GPIO_InitStruct.Pull = GPIO_NOPULL; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH; + GPIO_InitStruct.Alternate = GPIO_AF12_FSMC; + + HAL_GPIO_Init(GPIOD, &GPIO_InitStruct); + + /* USER CODE BEGIN FSMC_MspInit 1 */ + + /* USER CODE END FSMC_MspInit 1 */ +} + +void HAL_SRAM_MspInit(SRAM_HandleTypeDef* sramHandle){ + /* USER CODE BEGIN SRAM_MspInit 0 */ + + /* USER CODE END SRAM_MspInit 0 */ + HAL_FSMC_MspInit(); + /* USER CODE BEGIN SRAM_MspInit 1 */ + + /* USER CODE END SRAM_MspInit 1 */ +} + +static uint32_t FSMC_DeInitialized = 0; + +static void HAL_FSMC_MspDeInit(void){ + /* USER CODE BEGIN FSMC_MspDeInit 0 */ + + /* USER CODE END FSMC_MspDeInit 0 */ + if (FSMC_DeInitialized) { + return; + } + FSMC_DeInitialized = 1; + /* Peripheral clock enable */ + __HAL_RCC_FSMC_CLK_DISABLE(); + + /** FSMC GPIO Configuration + PE7 ------> FSMC_D4 + PE8 ------> FSMC_D5 + PE9 ------> FSMC_D6 + PE10 ------> FSMC_D7 + PE11 ------> FSMC_D8 + PE12 ------> FSMC_D9 + PE13 ------> FSMC_D10 + PE14 ------> FSMC_D11 + PE15 ------> FSMC_D12 + PD8 ------> FSMC_D13 + PD9 ------> FSMC_D14 + PD10 ------> FSMC_D15 + PD13 ------> FSMC_A18 + PD14 ------> FSMC_D0 + PD15 ------> FSMC_D1 + PD0 ------> FSMC_D2 + PD1 ------> FSMC_D3 + PD4 ------> FSMC_NOE + PD5 ------> FSMC_NWE + PD7 ------> FSMC_NE1 + */ + + HAL_GPIO_DeInit(GPIOE, GPIO_PIN_7|GPIO_PIN_8|GPIO_PIN_9|GPIO_PIN_10 + |GPIO_PIN_11|GPIO_PIN_12|GPIO_PIN_13|GPIO_PIN_14 + |GPIO_PIN_15); + + HAL_GPIO_DeInit(GPIOD, GPIO_PIN_8|GPIO_PIN_9|GPIO_PIN_10|GPIO_PIN_13 + |GPIO_PIN_14|GPIO_PIN_15|GPIO_PIN_0|GPIO_PIN_1 + |GPIO_PIN_4|GPIO_PIN_5|GPIO_PIN_7); + + /* USER CODE BEGIN FSMC_MspDeInit 1 */ + + /* USER CODE END FSMC_MspDeInit 1 */ +} + +void HAL_SRAM_MspDeInit(SRAM_HandleTypeDef* sramHandle){ + /* USER CODE BEGIN SRAM_MspDeInit 0 */ + + /* USER CODE END SRAM_MspDeInit 0 */ + HAL_FSMC_MspDeInit(); + /* USER CODE BEGIN SRAM_MspDeInit 1 */ + + /* USER CODE END SRAM_MspDeInit 1 */ +} +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/Src/gpio.c b/Src/gpio.c index 528a2ad..9df4d24 100644 --- a/Src/gpio.c +++ b/Src/gpio.c @@ -9,10 +9,10 @@ *

© Copyright (c) 2019 STMicroelectronics. * All rights reserved.

* - * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the - * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause + * This software component is licensed by ST under Ultimate Liberty license + * SLA0044, the "License"; You may not use this file except in compliance with + * the License. You may obtain a copy of the License at: + * www.st.com/SLA0044 * ****************************************************************************** */ @@ -43,17 +43,35 @@ void MX_GPIO_Init(void) LL_GPIO_InitTypeDef GPIO_InitStruct = {0}; /* GPIO Ports Clock Enable */ + LL_AHB1_GRP1_EnableClock(LL_AHB1_GRP1_PERIPH_GPIOE); LL_AHB1_GRP1_EnableClock(LL_AHB1_GRP1_PERIPH_GPIOC); LL_AHB1_GRP1_EnableClock(LL_AHB1_GRP1_PERIPH_GPIOH); LL_AHB1_GRP1_EnableClock(LL_AHB1_GRP1_PERIPH_GPIOA); LL_AHB1_GRP1_EnableClock(LL_AHB1_GRP1_PERIPH_GPIOB); LL_AHB1_GRP1_EnableClock(LL_AHB1_GRP1_PERIPH_GPIOD); + /**/ + LL_GPIO_ResetOutputPin(GPIOC, DEBUG0_Pin|DEBUG1_Pin|DEBUG2_Pin|DEBUG3_Pin); + /**/ LL_GPIO_ResetOutputPin(GPIOA, LED0_Pin|LED1_Pin); /**/ - LL_GPIO_ResetOutputPin(GPIOD, DIAG0_Pin|DIAG1_Pin|DIAG2_Pin|DIAG3_Pin); + LL_GPIO_ResetOutputPin(GPIOB, T_CS_Pin|NRF_CE_Pin|NRF_CS_Pin); + + /**/ + GPIO_InitStruct.Pin = KEY1_Pin|KEY0_Pin; + GPIO_InitStruct.Mode = LL_GPIO_MODE_INPUT; + GPIO_InitStruct.Pull = LL_GPIO_PULL_UP; + LL_GPIO_Init(GPIOE, &GPIO_InitStruct); + + /**/ + GPIO_InitStruct.Pin = DEBUG0_Pin|DEBUG1_Pin|DEBUG2_Pin|DEBUG3_Pin; + GPIO_InitStruct.Mode = LL_GPIO_MODE_OUTPUT; + GPIO_InitStruct.Speed = LL_GPIO_SPEED_FREQ_LOW; + GPIO_InitStruct.OutputType = LL_GPIO_OUTPUT_PUSHPULL; + GPIO_InitStruct.Pull = LL_GPIO_PULL_NO; + LL_GPIO_Init(GPIOC, &GPIO_InitStruct); /**/ GPIO_InitStruct.Pin = LED0_Pin|LED1_Pin; @@ -64,18 +82,18 @@ void MX_GPIO_Init(void) LL_GPIO_Init(GPIOA, &GPIO_InitStruct); /**/ - GPIO_InitStruct.Pin = F_CS_Pin; + GPIO_InitStruct.Pin = F_CS_Pin|NRF_IRQ_Pin; GPIO_InitStruct.Mode = LL_GPIO_MODE_INPUT; GPIO_InitStruct.Pull = LL_GPIO_PULL_NO; - LL_GPIO_Init(F_CS_GPIO_Port, &GPIO_InitStruct); + LL_GPIO_Init(GPIOB, &GPIO_InitStruct); /**/ - GPIO_InitStruct.Pin = DIAG0_Pin|DIAG1_Pin|DIAG2_Pin|DIAG3_Pin; + GPIO_InitStruct.Pin = T_CS_Pin|NRF_CE_Pin|NRF_CS_Pin; GPIO_InitStruct.Mode = LL_GPIO_MODE_OUTPUT; GPIO_InitStruct.Speed = LL_GPIO_SPEED_FREQ_LOW; GPIO_InitStruct.OutputType = LL_GPIO_OUTPUT_PUSHPULL; GPIO_InitStruct.Pull = LL_GPIO_PULL_NO; - LL_GPIO_Init(GPIOD, &GPIO_InitStruct); + LL_GPIO_Init(GPIOB, &GPIO_InitStruct); } diff --git a/Src/main.c b/Src/main.c index e23cc47..785d8b7 100644 --- a/Src/main.c +++ b/Src/main.c @@ -22,9 +22,13 @@ #include "main.h" #include "crc.h" #include "dma.h" +#include "fatfs.h" +#include "sdio.h" #include "spi.h" #include "usart.h" +#include "usb_otg.h" #include "gpio.h" +#include "fsmc.h" /* Private includes ----------------------------------------------------------*/ /* USER CODE BEGIN Includes */ @@ -94,9 +98,7 @@ int main(void) /* Initialize all configured peripherals */ MX_GPIO_Init(); MX_DMA_Init(); - MX_SPI1_Init(); MX_UART4_Init(); - MX_UART5_Init(); MX_USART1_UART_Init(); MX_USART2_UART_Init(); MX_USART3_UART_Init(); @@ -139,7 +141,7 @@ void SystemClock_Config(void) RCC_OscInitStruct.PLL.PLLM = 4; RCC_OscInitStruct.PLL.PLLN = 168; RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV2; - RCC_OscInitStruct.PLL.PLLQ = 4; + RCC_OscInitStruct.PLL.PLLQ = 7; if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK) { Error_Handler(); diff --git a/Src/sd_diskio.c b/Src/sd_diskio.c new file mode 100644 index 0000000..815ed24 --- /dev/null +++ b/Src/sd_diskio.c @@ -0,0 +1,259 @@ +/* USER CODE BEGIN Header */ +/** + ****************************************************************************** + * @file sd_diskio.c + * @brief SD Disk I/O driver + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2019 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under Ultimate Liberty license + * SLA0044, the "License"; You may not use this file except in compliance with + * the License. You may obtain a copy of the License at: + * www.st.com/SLA0044 + * + ****************************************************************************** + */ +/* USER CODE END Header */ + +/* Note: code generation based on sd_diskio_template.c v2.1.1 as "Use dma template" is disabled. */ + +/* USER CODE BEGIN firstSection */ +/* can be used to modify / undefine following code or add new definitions */ +/* USER CODE END firstSection*/ + +/* Includes ------------------------------------------------------------------*/ + +#include "ff_gen_drv.h" +#include "sd_diskio.h" + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/* use the default SD timout as defined in the platform BSP driver*/ +#if defined(SDMMC_DATATIMEOUT) +#define SD_TIMEOUT SDMMC_DATATIMEOUT +#elif defined(SD_DATATIMEOUT) +#define SD_TIMEOUT SD_DATATIMEOUT +#else +#define SD_TIMEOUT 30 * 1000 +#endif + +#define SD_DEFAULT_BLOCK_SIZE 512 + +/* + * Depending on the use case, the SD card initialization could be done at the + * application level: if it is the case define the flag below to disable + * the BSP_SD_Init() call in the SD_Initialize() and add a call to + * BSP_SD_Init() elsewhere in the application. + */ +/* USER CODE BEGIN disableSDInit */ +/* #define DISABLE_SD_INIT */ +/* USER CODE END disableSDInit */ + +/* Disk status */ +static volatile DSTATUS Stat = STA_NOINIT; + +/* Private function prototypes -----------------------------------------------*/ +static DSTATUS SD_CheckStatus(BYTE lun); +DSTATUS SD_initialize (BYTE); +DSTATUS SD_status (BYTE); +DRESULT SD_read (BYTE, BYTE*, DWORD, UINT); +#if _USE_WRITE == 1 + DRESULT SD_write (BYTE, const BYTE*, DWORD, UINT); +#endif /* _USE_WRITE == 1 */ +#if _USE_IOCTL == 1 + DRESULT SD_ioctl (BYTE, BYTE, void*); +#endif /* _USE_IOCTL == 1 */ + +const Diskio_drvTypeDef SD_Driver = +{ + SD_initialize, + SD_status, + SD_read, +#if _USE_WRITE == 1 + SD_write, +#endif /* _USE_WRITE == 1 */ + +#if _USE_IOCTL == 1 + SD_ioctl, +#endif /* _USE_IOCTL == 1 */ +}; + +/* USER CODE BEGIN beforeFunctionSection */ +/* can be used to modify / undefine following code or add new code */ +/* USER CODE END beforeFunctionSection */ + +/* Private functions ---------------------------------------------------------*/ + +static DSTATUS SD_CheckStatus(BYTE lun) +{ + Stat = STA_NOINIT; + + if(BSP_SD_GetCardState() == MSD_OK) + { + Stat &= ~STA_NOINIT; + } + + return Stat; +} + +/** + * @brief Initializes a Drive + * @param lun : not used + * @retval DSTATUS: Operation status + */ +DSTATUS SD_initialize(BYTE lun) +{ +Stat = STA_NOINIT; + +#if !defined(DISABLE_SD_INIT) + + if(BSP_SD_Init() == MSD_OK) + { + Stat = SD_CheckStatus(lun); + } + +#else + Stat = SD_CheckStatus(lun); +#endif + return Stat; +} + +/** + * @brief Gets Disk Status + * @param lun : not used + * @retval DSTATUS: Operation status + */ +DSTATUS SD_status(BYTE lun) +{ + return SD_CheckStatus(lun); +} + +/* USER CODE BEGIN beforeReadSection */ +/* can be used to modify previous code / undefine following code / add new code */ +/* USER CODE END beforeReadSection */ +/** + * @brief Reads Sector(s) + * @param lun : not used + * @param *buff: Data buffer to store read data + * @param sector: Sector address (LBA) + * @param count: Number of sectors to read (1..128) + * @retval DRESULT: Operation result + */ + +DRESULT SD_read(BYTE lun, BYTE *buff, DWORD sector, UINT count) +{ + DRESULT res = RES_ERROR; + + if(BSP_SD_ReadBlocks((uint32_t*)buff, + (uint32_t) (sector), + count, SD_TIMEOUT) == MSD_OK) + { + /* wait until the read operation is finished */ + while(BSP_SD_GetCardState()!= MSD_OK) + { + } + res = RES_OK; + } + + return res; +} + +/* USER CODE BEGIN beforeWriteSection */ +/* can be used to modify previous code / undefine following code / add new code */ +/* USER CODE END beforeWriteSection */ +/** + * @brief Writes Sector(s) + * @param lun : not used + * @param *buff: Data to be written + * @param sector: Sector address (LBA) + * @param count: Number of sectors to write (1..128) + * @retval DRESULT: Operation result + */ +#if _USE_WRITE == 1 + +DRESULT SD_write(BYTE lun, const BYTE *buff, DWORD sector, UINT count) +{ + DRESULT res = RES_ERROR; + + if(BSP_SD_WriteBlocks((uint32_t*)buff, + (uint32_t)(sector), + count, SD_TIMEOUT) == MSD_OK) + { + /* wait until the Write operation is finished */ + while(BSP_SD_GetCardState() != MSD_OK) + { + } + res = RES_OK; + } + + return res; +} +#endif /* _USE_WRITE == 1 */ + +/* USER CODE BEGIN beforeIoctlSection */ +/* can be used to modify previous code / undefine following code / add new code */ +/* USER CODE END beforeIoctlSection */ +/** + * @brief I/O control operation + * @param lun : not used + * @param cmd: Control code + * @param *buff: Buffer to send/receive control data + * @retval DRESULT: Operation result + */ +#if _USE_IOCTL == 1 +DRESULT SD_ioctl(BYTE lun, BYTE cmd, void *buff) +{ + DRESULT res = RES_ERROR; + BSP_SD_CardInfo CardInfo; + + if (Stat & STA_NOINIT) return RES_NOTRDY; + + switch (cmd) + { + /* Make sure that no pending write process */ + case CTRL_SYNC : + res = RES_OK; + break; + + /* Get number of sectors on the disk (DWORD) */ + case GET_SECTOR_COUNT : + BSP_SD_GetCardInfo(&CardInfo); + *(DWORD*)buff = CardInfo.LogBlockNbr; + res = RES_OK; + break; + + /* Get R/W sector size (WORD) */ + case GET_SECTOR_SIZE : + BSP_SD_GetCardInfo(&CardInfo); + *(WORD*)buff = CardInfo.LogBlockSize; + res = RES_OK; + break; + + /* Get erase block size in unit of sector (DWORD) */ + case GET_BLOCK_SIZE : + BSP_SD_GetCardInfo(&CardInfo); + *(DWORD*)buff = CardInfo.LogBlockSize / SD_DEFAULT_BLOCK_SIZE; + res = RES_OK; + break; + + default: + res = RES_PARERR; + } + + return res; +} +#endif /* _USE_IOCTL == 1 */ + +/* USER CODE BEGIN afterIoctlSection */ +/* can be used to modify previous code / undefine following code / add new code */ +/* USER CODE END afterIoctlSection */ + +/* USER CODE BEGIN lastSection */ +/* can be used to modify / undefine previous code or add new code */ +/* USER CODE END lastSection */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ + diff --git a/Src/sdio.c b/Src/sdio.c new file mode 100644 index 0000000..e9ad38d --- /dev/null +++ b/Src/sdio.c @@ -0,0 +1,121 @@ +/** + ****************************************************************************** + * File Name : SDIO.c + * Description : This file provides code for the configuration + * of the SDIO instances. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2019 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under Ultimate Liberty license + * SLA0044, the "License"; You may not use this file except in compliance with + * the License. You may obtain a copy of the License at: + * www.st.com/SLA0044 + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "sdio.h" + +/* USER CODE BEGIN 0 */ + +/* USER CODE END 0 */ + +SD_HandleTypeDef hsd; + +/* SDIO init function */ + +void MX_SDIO_SD_Init(void) +{ + + hsd.Instance = SDIO; + hsd.Init.ClockEdge = SDIO_CLOCK_EDGE_RISING; + hsd.Init.ClockBypass = SDIO_CLOCK_BYPASS_DISABLE; + hsd.Init.ClockPowerSave = SDIO_CLOCK_POWER_SAVE_DISABLE; + hsd.Init.BusWide = SDIO_BUS_WIDE_1B; + hsd.Init.HardwareFlowControl = SDIO_HARDWARE_FLOW_CONTROL_DISABLE; + hsd.Init.ClockDiv = 0; + +} + +void HAL_SD_MspInit(SD_HandleTypeDef* sdHandle) +{ + + GPIO_InitTypeDef GPIO_InitStruct = {0}; + if(sdHandle->Instance==SDIO) + { + /* USER CODE BEGIN SDIO_MspInit 0 */ + + /* USER CODE END SDIO_MspInit 0 */ + /* SDIO clock enable */ + __HAL_RCC_SDIO_CLK_ENABLE(); + + __HAL_RCC_GPIOC_CLK_ENABLE(); + __HAL_RCC_GPIOD_CLK_ENABLE(); + /**SDIO GPIO Configuration + PC8 ------> SDIO_D0 + PC9 ------> SDIO_D1 + PC10 ------> SDIO_D2 + PC11 ------> SDIO_D3 + PC12 ------> SDIO_CK + PD2 ------> SDIO_CMD + */ + GPIO_InitStruct.Pin = GPIO_PIN_8|GPIO_PIN_9|GPIO_PIN_10|GPIO_PIN_11 + |GPIO_PIN_12; + GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; + GPIO_InitStruct.Pull = GPIO_NOPULL; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH; + GPIO_InitStruct.Alternate = GPIO_AF12_SDIO; + HAL_GPIO_Init(GPIOC, &GPIO_InitStruct); + + GPIO_InitStruct.Pin = GPIO_PIN_2; + GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; + GPIO_InitStruct.Pull = GPIO_NOPULL; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH; + GPIO_InitStruct.Alternate = GPIO_AF12_SDIO; + HAL_GPIO_Init(GPIOD, &GPIO_InitStruct); + + /* USER CODE BEGIN SDIO_MspInit 1 */ + + /* USER CODE END SDIO_MspInit 1 */ + } +} + +void HAL_SD_MspDeInit(SD_HandleTypeDef* sdHandle) +{ + + if(sdHandle->Instance==SDIO) + { + /* USER CODE BEGIN SDIO_MspDeInit 0 */ + + /* USER CODE END SDIO_MspDeInit 0 */ + /* Peripheral clock disable */ + __HAL_RCC_SDIO_CLK_DISABLE(); + + /**SDIO GPIO Configuration + PC8 ------> SDIO_D0 + PC9 ------> SDIO_D1 + PC10 ------> SDIO_D2 + PC11 ------> SDIO_D3 + PC12 ------> SDIO_CK + PD2 ------> SDIO_CMD + */ + HAL_GPIO_DeInit(GPIOC, GPIO_PIN_8|GPIO_PIN_9|GPIO_PIN_10|GPIO_PIN_11 + |GPIO_PIN_12); + + HAL_GPIO_DeInit(GPIOD, GPIO_PIN_2); + + /* USER CODE BEGIN SDIO_MspDeInit 1 */ + + /* USER CODE END SDIO_MspDeInit 1 */ + } +} + +/* USER CODE BEGIN 1 */ + +/* USER CODE END 1 */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/Src/spi.c b/Src/spi.c index 613a03d..ba8bda8 100644 --- a/Src/spi.c +++ b/Src/spi.c @@ -9,10 +9,10 @@ *

© Copyright (c) 2019 STMicroelectronics. * All rights reserved.

* - * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the - * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause + * This software component is licensed by ST under Ultimate Liberty license + * SLA0044, the "License"; You may not use this file except in compliance with + * the License. You may obtain a copy of the License at: + * www.st.com/SLA0044 * ****************************************************************************** */ @@ -47,6 +47,50 @@ void MX_SPI1_Init(void) GPIO_InitStruct.Alternate = LL_GPIO_AF_5; LL_GPIO_Init(GPIOB, &GPIO_InitStruct); + /* SPI1 DMA Init */ + + /* SPI1_RX Init */ + LL_DMA_SetChannelSelection(DMA2, LL_DMA_STREAM_0, LL_DMA_CHANNEL_3); + + LL_DMA_SetDataTransferDirection(DMA2, LL_DMA_STREAM_0, LL_DMA_DIRECTION_PERIPH_TO_MEMORY); + + LL_DMA_SetStreamPriorityLevel(DMA2, LL_DMA_STREAM_0, LL_DMA_PRIORITY_LOW); + + LL_DMA_SetMode(DMA2, LL_DMA_STREAM_0, LL_DMA_MODE_NORMAL); + + LL_DMA_SetPeriphIncMode(DMA2, LL_DMA_STREAM_0, LL_DMA_PERIPH_NOINCREMENT); + + LL_DMA_SetMemoryIncMode(DMA2, LL_DMA_STREAM_0, LL_DMA_MEMORY_INCREMENT); + + LL_DMA_SetPeriphSize(DMA2, LL_DMA_STREAM_0, LL_DMA_PDATAALIGN_BYTE); + + LL_DMA_SetMemorySize(DMA2, LL_DMA_STREAM_0, LL_DMA_MDATAALIGN_BYTE); + + LL_DMA_DisableFifoMode(DMA2, LL_DMA_STREAM_0); + + /* SPI1_TX Init */ + LL_DMA_SetChannelSelection(DMA2, LL_DMA_STREAM_5, LL_DMA_CHANNEL_3); + + LL_DMA_SetDataTransferDirection(DMA2, LL_DMA_STREAM_5, LL_DMA_DIRECTION_MEMORY_TO_PERIPH); + + LL_DMA_SetStreamPriorityLevel(DMA2, LL_DMA_STREAM_5, LL_DMA_PRIORITY_LOW); + + LL_DMA_SetMode(DMA2, LL_DMA_STREAM_5, LL_DMA_MODE_NORMAL); + + LL_DMA_SetPeriphIncMode(DMA2, LL_DMA_STREAM_5, LL_DMA_PERIPH_NOINCREMENT); + + LL_DMA_SetMemoryIncMode(DMA2, LL_DMA_STREAM_5, LL_DMA_MEMORY_INCREMENT); + + LL_DMA_SetPeriphSize(DMA2, LL_DMA_STREAM_5, LL_DMA_PDATAALIGN_BYTE); + + LL_DMA_SetMemorySize(DMA2, LL_DMA_STREAM_5, LL_DMA_MDATAALIGN_BYTE); + + LL_DMA_DisableFifoMode(DMA2, LL_DMA_STREAM_5); + + /* SPI1 interrupt Init */ + NVIC_SetPriority(SPI1_IRQn, NVIC_EncodePriority(NVIC_GetPriorityGrouping(),0, 0)); + NVIC_EnableIRQ(SPI1_IRQn); + SPI_InitStruct.TransferDirection = LL_SPI_FULL_DUPLEX; SPI_InitStruct.Mode = LL_SPI_MODE_MASTER; SPI_InitStruct.DataWidth = LL_SPI_DATAWIDTH_8BIT; @@ -60,6 +104,47 @@ void MX_SPI1_Init(void) LL_SPI_Init(SPI1, &SPI_InitStruct); LL_SPI_SetStandard(SPI1, LL_SPI_PROTOCOL_MOTOROLA); +} +/* SPI2 init function */ +void MX_SPI2_Init(void) +{ + LL_SPI_InitTypeDef SPI_InitStruct = {0}; + + LL_GPIO_InitTypeDef GPIO_InitStruct = {0}; + /* Peripheral clock enable */ + LL_APB1_GRP1_EnableClock(LL_APB1_GRP1_PERIPH_SPI2); + + LL_AHB1_GRP1_EnableClock(LL_AHB1_GRP1_PERIPH_GPIOB); + /**SPI2 GPIO Configuration + PB13 ------> SPI2_SCK + PB14 ------> SPI2_MISO + PB15 ------> SPI2_MOSI + */ + GPIO_InitStruct.Pin = LL_GPIO_PIN_13|LL_GPIO_PIN_14|LL_GPIO_PIN_15; + GPIO_InitStruct.Mode = LL_GPIO_MODE_ALTERNATE; + GPIO_InitStruct.Speed = LL_GPIO_SPEED_FREQ_VERY_HIGH; + GPIO_InitStruct.OutputType = LL_GPIO_OUTPUT_PUSHPULL; + GPIO_InitStruct.Pull = LL_GPIO_PULL_NO; + GPIO_InitStruct.Alternate = LL_GPIO_AF_5; + LL_GPIO_Init(GPIOB, &GPIO_InitStruct); + + /* SPI2 interrupt Init */ + NVIC_SetPriority(SPI2_IRQn, NVIC_EncodePriority(NVIC_GetPriorityGrouping(),0, 0)); + NVIC_EnableIRQ(SPI2_IRQn); + + SPI_InitStruct.TransferDirection = LL_SPI_FULL_DUPLEX; + SPI_InitStruct.Mode = LL_SPI_MODE_MASTER; + SPI_InitStruct.DataWidth = LL_SPI_DATAWIDTH_8BIT; + SPI_InitStruct.ClockPolarity = LL_SPI_POLARITY_LOW; + SPI_InitStruct.ClockPhase = LL_SPI_PHASE_1EDGE; + SPI_InitStruct.NSS = LL_SPI_NSS_SOFT; + SPI_InitStruct.BaudRate = LL_SPI_BAUDRATEPRESCALER_DIV2; + SPI_InitStruct.BitOrder = LL_SPI_MSB_FIRST; + SPI_InitStruct.CRCCalculation = LL_SPI_CRCCALCULATION_DISABLE; + SPI_InitStruct.CRCPoly = 10; + LL_SPI_Init(SPI2, &SPI_InitStruct); + LL_SPI_SetStandard(SPI2, LL_SPI_PROTOCOL_MOTOROLA); + } /* USER CODE BEGIN 1 */ diff --git a/Src/stm32f4xx_it.c b/Src/stm32f4xx_it.c index 44d9362..d9f556c 100644 --- a/Src/stm32f4xx_it.c +++ b/Src/stm32f4xx_it.c @@ -208,20 +208,6 @@ void SysTick_Handler(void) /* please refer to the startup file (startup_stm32f4xx.s). */ /******************************************************************************/ -/** - * @brief This function handles DMA1 stream0 global interrupt. - */ -void DMA1_Stream0_IRQHandler(void) -{ - /* USER CODE BEGIN DMA1_Stream0_IRQn 0 */ - HandleUsartRxDmaIrq(&g_uartStatuses[USART5_OFFSET]); - /* USER CODE END DMA1_Stream0_IRQn 0 */ - - /* USER CODE BEGIN DMA1_Stream0_IRQn 1 */ - - /* USER CODE END DMA1_Stream0_IRQn 1 */ -} - /** * @brief This function handles DMA1 stream1 global interrupt. */ @@ -306,6 +292,32 @@ void DMA1_Stream6_IRQHandler(void) /* USER CODE END DMA1_Stream6_IRQn 1 */ } +/** + * @brief This function handles SPI1 global interrupt. + */ +void SPI1_IRQHandler(void) +{ + /* USER CODE BEGIN SPI1_IRQn 0 */ + + /* USER CODE END SPI1_IRQn 0 */ + /* USER CODE BEGIN SPI1_IRQn 1 */ + + /* USER CODE END SPI1_IRQn 1 */ +} + +/** + * @brief This function handles SPI2 global interrupt. + */ +void SPI2_IRQHandler(void) +{ + /* USER CODE BEGIN SPI2_IRQn 0 */ + + /* USER CODE END SPI2_IRQn 0 */ + /* USER CODE BEGIN SPI2_IRQn 1 */ + + /* USER CODE END SPI2_IRQn 1 */ +} + /** * @brief This function handles USART1 global interrupt. */ @@ -345,20 +357,6 @@ void USART3_IRQHandler(void) /* USER CODE END USART3_IRQn 1 */ } -/** - * @brief This function handles DMA1 stream7 global interrupt. - */ -void DMA1_Stream7_IRQHandler(void) -{ - /* USER CODE BEGIN DMA1_Stream7_IRQn 0 */ - HandleUsartTxDmaIrq(&g_uartStatuses[USART5_OFFSET]); - /* USER CODE END DMA1_Stream7_IRQn 0 */ - - /* USER CODE BEGIN DMA1_Stream7_IRQn 1 */ - - /* USER CODE END DMA1_Stream7_IRQn 1 */ -} - /** * @brief This function handles UART4 global interrupt. */ @@ -372,26 +370,13 @@ void UART4_IRQHandler(void) /* USER CODE END UART4_IRQn 1 */ } -/** - * @brief This function handles UART5 global interrupt. - */ -void UART5_IRQHandler(void) -{ - /* USER CODE BEGIN UART5_IRQn 0 */ - HandleUsartIrq(&g_uartStatuses[USART5_OFFSET]); - /* USER CODE END UART5_IRQn 0 */ - /* USER CODE BEGIN UART5_IRQn 1 */ - - /* USER CODE END UART5_IRQn 1 */ -} - /** * @brief This function handles DMA2 stream0 global interrupt. */ void DMA2_Stream0_IRQHandler(void) { /* USER CODE BEGIN DMA2_Stream0_IRQn 0 */ - HandleMemcpyDmaIrq(); + /* USER CODE END DMA2_Stream0_IRQn 0 */ /* USER CODE BEGIN DMA2_Stream0_IRQn 1 */ @@ -427,6 +412,21 @@ void DMA2_Stream2_IRQHandler(void) /* USER CODE END DMA2_Stream2_IRQn 1 */ } +/** + * @brief This function handles DMA2 stream3 global interrupt. + */ +void DMA2_Stream3_IRQHandler(void) +{ + /* USER CODE BEGIN DMA2_Stream3_IRQn 0 */ + HandleMemcpyDmaIrq(); + + /* USER CODE END DMA2_Stream3_IRQn 0 */ + + /* USER CODE BEGIN DMA2_Stream3_IRQn 1 */ + + /* USER CODE END DMA2_Stream3_IRQn 1 */ +} + /** * @brief This function handles DMA2 stream4 global interrupt. */ @@ -441,6 +441,20 @@ void DMA2_Stream4_IRQHandler(void) /* USER CODE END DMA2_Stream4_IRQn 1 */ } +/** + * @brief This function handles DMA2 stream5 global interrupt. + */ +void DMA2_Stream5_IRQHandler(void) +{ + /* USER CODE BEGIN DMA2_Stream5_IRQn 0 */ + + /* USER CODE END DMA2_Stream5_IRQn 0 */ + + /* USER CODE BEGIN DMA2_Stream5_IRQn 1 */ + + /* USER CODE END DMA2_Stream5_IRQn 1 */ +} + /** * @brief This function handles DMA2 stream6 global interrupt. */ diff --git a/Src/usart.c b/Src/usart.c index 55ea163..442d749 100644 --- a/Src/usart.c +++ b/Src/usart.c @@ -9,10 +9,10 @@ *

© Copyright (c) 2019 STMicroelectronics. * All rights reserved.

* - * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the - * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause + * This software component is licensed by ST under Ultimate Liberty license + * SLA0044, the "License"; You may not use this file except in compliance with + * the License. You may obtain a copy of the License at: + * www.st.com/SLA0044 * ****************************************************************************** */ @@ -33,18 +33,18 @@ void MX_UART4_Init(void) /* Peripheral clock enable */ LL_APB1_GRP1_EnableClock(LL_APB1_GRP1_PERIPH_UART4); - LL_AHB1_GRP1_EnableClock(LL_AHB1_GRP1_PERIPH_GPIOC); + LL_AHB1_GRP1_EnableClock(LL_AHB1_GRP1_PERIPH_GPIOA); /**UART4 GPIO Configuration - PC10 ------> UART4_TX - PC11 ------> UART4_RX + PA0-WKUP ------> UART4_TX + PA1 ------> UART4_RX */ - GPIO_InitStruct.Pin = LL_GPIO_PIN_10|LL_GPIO_PIN_11; + GPIO_InitStruct.Pin = LL_GPIO_PIN_0|LL_GPIO_PIN_1; GPIO_InitStruct.Mode = LL_GPIO_MODE_ALTERNATE; GPIO_InitStruct.Speed = LL_GPIO_SPEED_FREQ_VERY_HIGH; GPIO_InitStruct.OutputType = LL_GPIO_OUTPUT_PUSHPULL; GPIO_InitStruct.Pull = LL_GPIO_PULL_UP; GPIO_InitStruct.Alternate = LL_GPIO_AF_8; - LL_GPIO_Init(GPIOC, &GPIO_InitStruct); + LL_GPIO_Init(GPIOA, &GPIO_InitStruct); /* UART4 DMA Init */ @@ -101,93 +101,6 @@ void MX_UART4_Init(void) LL_USART_ConfigAsyncMode(UART4); LL_USART_Enable(UART4); -} -/* UART5 init function */ -void MX_UART5_Init(void) -{ - LL_USART_InitTypeDef USART_InitStruct = {0}; - - LL_GPIO_InitTypeDef GPIO_InitStruct = {0}; - /* Peripheral clock enable */ - LL_APB1_GRP1_EnableClock(LL_APB1_GRP1_PERIPH_UART5); - - LL_AHB1_GRP1_EnableClock(LL_AHB1_GRP1_PERIPH_GPIOC); - LL_AHB1_GRP1_EnableClock(LL_AHB1_GRP1_PERIPH_GPIOD); - /**UART5 GPIO Configuration - PC12 ------> UART5_TX - PD2 ------> UART5_RX - */ - GPIO_InitStruct.Pin = LL_GPIO_PIN_12; - GPIO_InitStruct.Mode = LL_GPIO_MODE_ALTERNATE; - GPIO_InitStruct.Speed = LL_GPIO_SPEED_FREQ_VERY_HIGH; - GPIO_InitStruct.OutputType = LL_GPIO_OUTPUT_PUSHPULL; - GPIO_InitStruct.Pull = LL_GPIO_PULL_UP; - GPIO_InitStruct.Alternate = LL_GPIO_AF_8; - LL_GPIO_Init(GPIOC, &GPIO_InitStruct); - - GPIO_InitStruct.Pin = LL_GPIO_PIN_2; - GPIO_InitStruct.Mode = LL_GPIO_MODE_ALTERNATE; - GPIO_InitStruct.Speed = LL_GPIO_SPEED_FREQ_VERY_HIGH; - GPIO_InitStruct.OutputType = LL_GPIO_OUTPUT_PUSHPULL; - GPIO_InitStruct.Pull = LL_GPIO_PULL_UP; - GPIO_InitStruct.Alternate = LL_GPIO_AF_8; - LL_GPIO_Init(GPIOD, &GPIO_InitStruct); - - /* UART5 DMA Init */ - - /* UART5_RX Init */ - LL_DMA_SetChannelSelection(DMA1, LL_DMA_STREAM_0, LL_DMA_CHANNEL_4); - - LL_DMA_SetDataTransferDirection(DMA1, LL_DMA_STREAM_0, LL_DMA_DIRECTION_PERIPH_TO_MEMORY); - - LL_DMA_SetStreamPriorityLevel(DMA1, LL_DMA_STREAM_0, LL_DMA_PRIORITY_MEDIUM); - - LL_DMA_SetMode(DMA1, LL_DMA_STREAM_0, LL_DMA_MODE_NORMAL); - - LL_DMA_SetPeriphIncMode(DMA1, LL_DMA_STREAM_0, LL_DMA_PERIPH_NOINCREMENT); - - LL_DMA_SetMemoryIncMode(DMA1, LL_DMA_STREAM_0, LL_DMA_MEMORY_INCREMENT); - - LL_DMA_SetPeriphSize(DMA1, LL_DMA_STREAM_0, LL_DMA_PDATAALIGN_BYTE); - - LL_DMA_SetMemorySize(DMA1, LL_DMA_STREAM_0, LL_DMA_MDATAALIGN_BYTE); - - LL_DMA_DisableFifoMode(DMA1, LL_DMA_STREAM_0); - - /* UART5_TX Init */ - LL_DMA_SetChannelSelection(DMA1, LL_DMA_STREAM_7, LL_DMA_CHANNEL_4); - - LL_DMA_SetDataTransferDirection(DMA1, LL_DMA_STREAM_7, LL_DMA_DIRECTION_MEMORY_TO_PERIPH); - - LL_DMA_SetStreamPriorityLevel(DMA1, LL_DMA_STREAM_7, LL_DMA_PRIORITY_MEDIUM); - - LL_DMA_SetMode(DMA1, LL_DMA_STREAM_7, LL_DMA_MODE_NORMAL); - - LL_DMA_SetPeriphIncMode(DMA1, LL_DMA_STREAM_7, LL_DMA_PERIPH_NOINCREMENT); - - LL_DMA_SetMemoryIncMode(DMA1, LL_DMA_STREAM_7, LL_DMA_MEMORY_INCREMENT); - - LL_DMA_SetPeriphSize(DMA1, LL_DMA_STREAM_7, LL_DMA_PDATAALIGN_BYTE); - - LL_DMA_SetMemorySize(DMA1, LL_DMA_STREAM_7, LL_DMA_MDATAALIGN_BYTE); - - LL_DMA_DisableFifoMode(DMA1, LL_DMA_STREAM_7); - - /* UART5 interrupt Init */ - NVIC_SetPriority(UART5_IRQn, NVIC_EncodePriority(NVIC_GetPriorityGrouping(),0, 0)); - NVIC_EnableIRQ(UART5_IRQn); - - USART_InitStruct.BaudRate = 5250000; - USART_InitStruct.DataWidth = LL_USART_DATAWIDTH_8B; - USART_InitStruct.StopBits = LL_USART_STOPBITS_1; - USART_InitStruct.Parity = LL_USART_PARITY_NONE; - USART_InitStruct.TransferDirection = LL_USART_DIRECTION_TX_RX; - USART_InitStruct.HardwareFlowControl = LL_USART_HWCONTROL_NONE; - USART_InitStruct.OverSampling = LL_USART_OVERSAMPLING_8; - LL_USART_Init(UART5, &USART_InitStruct); - LL_USART_ConfigAsyncMode(UART5); - LL_USART_Enable(UART5); - } /* USART1 init function */ diff --git a/Src/usb_otg.c b/Src/usb_otg.c new file mode 100644 index 0000000..86dc2cb --- /dev/null +++ b/Src/usb_otg.c @@ -0,0 +1,108 @@ +/** + ****************************************************************************** + * File Name : USB_OTG.c + * Description : This file provides code for the configuration + * of the USB_OTG instances. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2019 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under Ultimate Liberty license + * SLA0044, the "License"; You may not use this file except in compliance with + * the License. You may obtain a copy of the License at: + * www.st.com/SLA0044 + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "usb_otg.h" + +/* USER CODE BEGIN 0 */ + +/* USER CODE END 0 */ + +PCD_HandleTypeDef hpcd_USB_OTG_FS; + +/* USB_OTG_FS init function */ + +void MX_USB_OTG_FS_PCD_Init(void) +{ + + hpcd_USB_OTG_FS.Instance = USB_OTG_FS; + hpcd_USB_OTG_FS.Init.dev_endpoints = 4; + hpcd_USB_OTG_FS.Init.speed = PCD_SPEED_FULL; + hpcd_USB_OTG_FS.Init.dma_enable = DISABLE; + hpcd_USB_OTG_FS.Init.phy_itface = PCD_PHY_EMBEDDED; + hpcd_USB_OTG_FS.Init.Sof_enable = DISABLE; + hpcd_USB_OTG_FS.Init.low_power_enable = DISABLE; + hpcd_USB_OTG_FS.Init.lpm_enable = DISABLE; + hpcd_USB_OTG_FS.Init.vbus_sensing_enable = DISABLE; + hpcd_USB_OTG_FS.Init.use_dedicated_ep1 = DISABLE; + if (HAL_PCD_Init(&hpcd_USB_OTG_FS) != HAL_OK) + { + Error_Handler(); + } + +} + +void HAL_PCD_MspInit(PCD_HandleTypeDef* pcdHandle) +{ + + GPIO_InitTypeDef GPIO_InitStruct = {0}; + if(pcdHandle->Instance==USB_OTG_FS) + { + /* USER CODE BEGIN USB_OTG_FS_MspInit 0 */ + + /* USER CODE END USB_OTG_FS_MspInit 0 */ + + __HAL_RCC_GPIOA_CLK_ENABLE(); + /**USB_OTG_FS GPIO Configuration + PA11 ------> USB_OTG_FS_DM + PA12 ------> USB_OTG_FS_DP + */ + GPIO_InitStruct.Pin = GPIO_PIN_11|GPIO_PIN_12; + GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; + GPIO_InitStruct.Pull = GPIO_NOPULL; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH; + GPIO_InitStruct.Alternate = GPIO_AF10_OTG_FS; + HAL_GPIO_Init(GPIOA, &GPIO_InitStruct); + + /* USB_OTG_FS clock enable */ + __HAL_RCC_USB_OTG_FS_CLK_ENABLE(); + /* USER CODE BEGIN USB_OTG_FS_MspInit 1 */ + + /* USER CODE END USB_OTG_FS_MspInit 1 */ + } +} + +void HAL_PCD_MspDeInit(PCD_HandleTypeDef* pcdHandle) +{ + + if(pcdHandle->Instance==USB_OTG_FS) + { + /* USER CODE BEGIN USB_OTG_FS_MspDeInit 0 */ + + /* USER CODE END USB_OTG_FS_MspDeInit 0 */ + /* Peripheral clock disable */ + __HAL_RCC_USB_OTG_FS_CLK_DISABLE(); + + /**USB_OTG_FS GPIO Configuration + PA11 ------> USB_OTG_FS_DM + PA12 ------> USB_OTG_FS_DP + */ + HAL_GPIO_DeInit(GPIOA, GPIO_PIN_11|GPIO_PIN_12); + + /* USER CODE BEGIN USB_OTG_FS_MspDeInit 1 */ + + /* USER CODE END USB_OTG_FS_MspDeInit 1 */ + } +} + +/* USER CODE BEGIN 1 */ + +/* USER CODE END 1 */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/app/application.c b/app/application.c index 6c4c1d9..3f0629b 100644 --- a/app/application.c +++ b/app/application.c @@ -16,7 +16,6 @@ // 1 2 2 7 // 2 1 5 6 // 3 1 1 3 -// 5 1 0 7 // 6 2 1 6 // console UART // 4 1 2 4 @@ -36,7 +35,6 @@ void MainLoop() { USART1, DMA2, LL_DMA_STREAM_2, LL_DMA_STREAM_7 }, { USART2, DMA1, LL_DMA_STREAM_5, LL_DMA_STREAM_6 }, { USART3, DMA1, LL_DMA_STREAM_1, LL_DMA_STREAM_3 }, - { UART5, DMA1, LL_DMA_STREAM_0, LL_DMA_STREAM_7 }, { USART6, DMA2, LL_DMA_STREAM_1, LL_DMA_STREAM_6 }, }; @@ -79,12 +77,16 @@ void MainLoop() for(uint16_t idx = 0; idx < sizeof(g_uartStatuses) / sizeof(g_uartStatuses[0]); ++idx) { if(!g_uartStatuses[idx].txBuffer.busy && send) { + DIAG_ENTER_BUSY(); PostPacket(&g_uartStatuses[idx], text2Send, sizeof(text2Send) - 1 - (rand() & randmask), &g_crcStatus); + DIAG_EXIT_BUSY(); } for(uint16_t rIdx = 0; rIdx < 2; ++rIdx) - if(g_uartStatuses[idx].rxBuffers[rIdx].busy || g_uartStatuses[idx].rxBuffers[rIdx].error) + if(g_uartStatuses[idx].rxBuffers[rIdx].busy || g_uartStatuses[idx].rxBuffers[rIdx].error) { + DIAG_ENTER_BUSY(); ConsumePacket(&g_uartStatuses[idx], rIdx, &g_crcStatus); - + DIAG_EXIT_BUSY(); + } } if(tick - lastStatsTick > STATS_DELAY_MS) { PrintStats((char*)g_statsBuf, statId, &g_uartStatuses[statId].stats, UART4, &g_ConsoleTxDmaInfo); @@ -93,5 +95,10 @@ void MainLoop() if(statId >= UARTCOUNT) statId = 0; } + uint32_t ein = LL_GPIO_ReadInputPort(KEY1_GPIO_Port); + if(!(ein & KEY1_Pin)) { + void (*fptr)(void) = (void*)0xa0000000; + fptr(); + } } } diff --git a/app/config.h b/app/config.h index 092426c..f518e94 100644 --- a/app/config.h +++ b/app/config.h @@ -8,13 +8,12 @@ #ifndef CONFIG_H_ #define CONFIG_H_ -#define UARTCOUNT 5 +#define UARTCOUNT 4 #define CRCTASKCOUNT (UARTCOUNT * 2) #define USART1_OFFSET 0 #define USART2_OFFSET 1 #define USART3_OFFSET 2 -#define USART5_OFFSET 3 -#define USART6_OFFSET 4 +#define USART6_OFFSET 3 #define CONSOLE_DMA_ENGINE DMA1 #define CONSOLE_TX_DMA_STREAM LL_DMA_STREAM_4 @@ -23,6 +22,6 @@ #define CRC_DMA_STREAM LL_DMA_STREAM_4 #define MEMCPY_DMA_ENGINE DMA2 -#define MEMCPY_DMA_STREAM LL_DMA_STREAM_0 +#define MEMCPY_DMA_STREAM LL_DMA_STREAM_3 #endif /* CONFIG_H_ */ diff --git a/app/diag.h b/app/diag.h index 8a72935..f99dbb5 100644 --- a/app/diag.h +++ b/app/diag.h @@ -17,13 +17,16 @@ if(x) { \ LL_GPIO_ResetOutputPin(LED0_GPIO_Port, LED0_Pin); \ LL_GPIO_SetOutputPin(LED1_GPIO_Port, LED1_Pin); \ } -#define DIAG_CRC_CALC_START() LL_GPIO_SetOutputPin(DIAG0_GPIO_Port, DIAG0_Pin) -#define DIAG_CRC_CALC_END() LL_GPIO_ResetOutputPin(DIAG0_GPIO_Port, DIAG0_Pin)//; LL_GPIO_TogglePin(DIAG3_GPIO_Port, DIAG3_Pin) -#define DIAG_INTERRUPT_IN() LL_GPIO_SetOutputPin(DIAG1_GPIO_Port, DIAG1_Pin) -#define DIAG_INTERRUPT_OUT() LL_GPIO_ResetOutputPin(DIAG1_GPIO_Port, DIAG1_Pin) -#define DIAG_ERROR_EVENT() LL_GPIO_TogglePin(DIAG2_GPIO_Port, DIAG2_Pin) -#else // _ENABLE_DIAG +#define DIAG_INTERRUPT_IN() LL_GPIO_SetOutputPin(DEBUG0_GPIO_Port, DEBUG0_Pin) +#define DIAG_INTERRUPT_OUT() LL_GPIO_ResetOutputPin(DEBUG0_GPIO_Port, DEBUG0_Pin) +#define DIAG_CRC_CALC_START() LL_GPIO_SetOutputPin(DEBUG1_GPIO_Port, DEBUG1_Pin) +#define DIAG_CRC_CALC_END() LL_GPIO_ResetOutputPin(DEBUG1_GPIO_Port, DEBUG1_Pin) +//#define DIAG_ERROR_EVENT() LL_GPIO_TogglePin(DEBUG2_GPIO_Port, DEBUG2_Pin) +#define DIAG_ENTER_BUSY() LL_GPIO_SetOutputPin(DEBUG2_GPIO_Port, DEBUG2_Pin) +#define DIAG_EXIT_BUSY() LL_GPIO_ResetOutputPin(DEBUG2_GPIO_Port, DEBUG2_Pin) + +#endif // _ENABLE_DIAG #ifndef DIAG_RX_BUFFER_SWITCH # define DIAG_RX_BUFFER_SWITCH(x) @@ -49,6 +52,12 @@ if(x) { \ # define DIAG_ERROR_EVENT() #endif -#endif // _ENABLE_DIAG +#ifndef DIAG_ENTER_BUSY +# define DIAG_ENTER_BUSY() +#endif + +#ifndef DIAG_EXIT_BUSY +# define DIAG_EXIT_BUSY() +#endif #endif /* DIAG_H_ */ diff --git a/f407ve_hs_uart (OpenOCD).cfg b/f407ve_hs_uart (OpenOCD).cfg new file mode 100644 index 0000000..6063bd2 --- /dev/null +++ b/f407ve_hs_uart (OpenOCD).cfg @@ -0,0 +1,31 @@ +# This is an genericBoard board with a single STM32F407VETx chip +# +# Generated by STM32CubeIDE +# Take care that such file, as generated, may be overridden without any early notice. Please have a look to debug launch configuration setup(s) + +source [find interface/stlink.cfg] + +set WORKAREASIZE 0x8000 + +transport select "hla_swd" + +set CHIPNAME STM32F407VETx +set BOARDNAME genericBoard + +# Enable debug when in low power modes +set ENABLE_LOW_POWER 1 + +# Stop Watchdog counters when halt +set STOP_WATCHDOG 1 + +# STlink Debug clock frequency +set CLOCK_FREQ 8000 + +# use hardware reset, connect under reset +# connect_assert_srst needed if low power mode application running (WFI...) +reset_config srst_only srst_nogate connect_assert_srst +set CONNECT_UNDER_RESET 1 + +# BCTM CPU variables + +source [find target/stm32f4x.cfg] diff --git a/f407ve_hs_uart Debug (1).cfg b/f407ve_hs_uart Debug (1).cfg new file mode 100644 index 0000000..6063bd2 --- /dev/null +++ b/f407ve_hs_uart Debug (1).cfg @@ -0,0 +1,31 @@ +# This is an genericBoard board with a single STM32F407VETx chip +# +# Generated by STM32CubeIDE +# Take care that such file, as generated, may be overridden without any early notice. Please have a look to debug launch configuration setup(s) + +source [find interface/stlink.cfg] + +set WORKAREASIZE 0x8000 + +transport select "hla_swd" + +set CHIPNAME STM32F407VETx +set BOARDNAME genericBoard + +# Enable debug when in low power modes +set ENABLE_LOW_POWER 1 + +# Stop Watchdog counters when halt +set STOP_WATCHDOG 1 + +# STlink Debug clock frequency +set CLOCK_FREQ 8000 + +# use hardware reset, connect under reset +# connect_assert_srst needed if low power mode application running (WFI...) +reset_config srst_only srst_nogate connect_assert_srst +set CONNECT_UNDER_RESET 1 + +# BCTM CPU variables + +source [find target/stm32f4x.cfg] diff --git a/f407ve_hs_uart OpenOCD.cfg b/f407ve_hs_uart OpenOCD.cfg new file mode 100644 index 0000000..6063bd2 --- /dev/null +++ b/f407ve_hs_uart OpenOCD.cfg @@ -0,0 +1,31 @@ +# This is an genericBoard board with a single STM32F407VETx chip +# +# Generated by STM32CubeIDE +# Take care that such file, as generated, may be overridden without any early notice. Please have a look to debug launch configuration setup(s) + +source [find interface/stlink.cfg] + +set WORKAREASIZE 0x8000 + +transport select "hla_swd" + +set CHIPNAME STM32F407VETx +set BOARDNAME genericBoard + +# Enable debug when in low power modes +set ENABLE_LOW_POWER 1 + +# Stop Watchdog counters when halt +set STOP_WATCHDOG 1 + +# STlink Debug clock frequency +set CLOCK_FREQ 8000 + +# use hardware reset, connect under reset +# connect_assert_srst needed if low power mode application running (WFI...) +reset_config srst_only srst_nogate connect_assert_srst +set CONNECT_UNDER_RESET 1 + +# BCTM CPU variables + +source [find target/stm32f4x.cfg] diff --git a/f407ve_hs_uart.ioc b/f407ve_hs_uart.ioc index a33b79d..89d96c7 100644 --- a/f407ve_hs_uart.ioc +++ b/f407ve_hs_uart.ioc @@ -1,232 +1,279 @@ #MicroXplorer Configuration settings - do not modify -Dma.MEMTOMEM.12.Direction=DMA_MEMORY_TO_MEMORY -Dma.MEMTOMEM.12.FIFOMode=DMA_FIFOMODE_ENABLE -Dma.MEMTOMEM.12.FIFOThreshold=DMA_FIFO_THRESHOLD_FULL -Dma.MEMTOMEM.12.Instance=DMA2_Stream4 -Dma.MEMTOMEM.12.MemBurst=DMA_MBURST_SINGLE -Dma.MEMTOMEM.12.MemDataAlignment=DMA_MDATAALIGN_WORD -Dma.MEMTOMEM.12.MemInc=DMA_MINC_DISABLE -Dma.MEMTOMEM.12.Mode=DMA_NORMAL -Dma.MEMTOMEM.12.PeriphBurst=DMA_PBURST_SINGLE -Dma.MEMTOMEM.12.PeriphDataAlignment=DMA_PDATAALIGN_WORD -Dma.MEMTOMEM.12.PeriphInc=DMA_PINC_ENABLE -Dma.MEMTOMEM.12.Priority=DMA_PRIORITY_LOW -Dma.MEMTOMEM.12.RequestParameters=Instance,Direction,PeriphInc,MemInc,PeriphDataAlignment,MemDataAlignment,Mode,Priority,FIFOMode,FIFOThreshold,MemBurst,PeriphBurst -Dma.MEMTOMEM.13.Direction=DMA_MEMORY_TO_MEMORY -Dma.MEMTOMEM.13.FIFOMode=DMA_FIFOMODE_ENABLE -Dma.MEMTOMEM.13.FIFOThreshold=DMA_FIFO_THRESHOLD_FULL -Dma.MEMTOMEM.13.Instance=DMA2_Stream0 -Dma.MEMTOMEM.13.MemBurst=DMA_MBURST_SINGLE -Dma.MEMTOMEM.13.MemDataAlignment=DMA_MDATAALIGN_WORD -Dma.MEMTOMEM.13.MemInc=DMA_MINC_ENABLE -Dma.MEMTOMEM.13.Mode=DMA_NORMAL -Dma.MEMTOMEM.13.PeriphBurst=DMA_PBURST_SINGLE -Dma.MEMTOMEM.13.PeriphDataAlignment=DMA_PDATAALIGN_WORD -Dma.MEMTOMEM.13.PeriphInc=DMA_PINC_ENABLE -Dma.MEMTOMEM.13.Priority=DMA_PRIORITY_LOW -Dma.MEMTOMEM.13.RequestParameters=Instance,Direction,PeriphInc,MemInc,PeriphDataAlignment,MemDataAlignment,Mode,Priority,FIFOMode,FIFOThreshold,MemBurst,PeriphBurst -Dma.Request0=UART4_RX -Dma.Request1=UART4_TX -Dma.Request10=USART6_RX -Dma.Request11=USART6_TX -Dma.Request12=MEMTOMEM -Dma.Request13=MEMTOMEM -Dma.Request2=USART3_RX -Dma.Request3=USART3_TX -Dma.Request4=UART5_RX -Dma.Request5=UART5_TX -Dma.Request6=USART2_RX -Dma.Request7=USART2_TX -Dma.Request8=USART1_RX -Dma.Request9=USART1_TX +Dma.MEMTOMEM.8.Direction=DMA_MEMORY_TO_MEMORY +Dma.MEMTOMEM.8.FIFOMode=DMA_FIFOMODE_ENABLE +Dma.MEMTOMEM.8.FIFOThreshold=DMA_FIFO_THRESHOLD_FULL +Dma.MEMTOMEM.8.Instance=DMA2_Stream4 +Dma.MEMTOMEM.8.MemBurst=DMA_MBURST_SINGLE +Dma.MEMTOMEM.8.MemDataAlignment=DMA_MDATAALIGN_WORD +Dma.MEMTOMEM.8.MemInc=DMA_MINC_DISABLE +Dma.MEMTOMEM.8.Mode=DMA_NORMAL +Dma.MEMTOMEM.8.PeriphBurst=DMA_PBURST_SINGLE +Dma.MEMTOMEM.8.PeriphDataAlignment=DMA_PDATAALIGN_WORD +Dma.MEMTOMEM.8.PeriphInc=DMA_PINC_ENABLE +Dma.MEMTOMEM.8.Priority=DMA_PRIORITY_LOW +Dma.MEMTOMEM.8.RequestParameters=Instance,Direction,PeriphInc,MemInc,PeriphDataAlignment,MemDataAlignment,Mode,Priority,FIFOMode,FIFOThreshold,MemBurst,PeriphBurst +Dma.MEMTOMEM.9.Direction=DMA_MEMORY_TO_MEMORY +Dma.MEMTOMEM.9.FIFOMode=DMA_FIFOMODE_ENABLE +Dma.MEMTOMEM.9.FIFOThreshold=DMA_FIFO_THRESHOLD_FULL +Dma.MEMTOMEM.9.Instance=DMA2_Stream3 +Dma.MEMTOMEM.9.MemBurst=DMA_MBURST_SINGLE +Dma.MEMTOMEM.9.MemDataAlignment=DMA_MDATAALIGN_WORD +Dma.MEMTOMEM.9.MemInc=DMA_MINC_ENABLE +Dma.MEMTOMEM.9.Mode=DMA_NORMAL +Dma.MEMTOMEM.9.PeriphBurst=DMA_PBURST_SINGLE +Dma.MEMTOMEM.9.PeriphDataAlignment=DMA_PDATAALIGN_WORD +Dma.MEMTOMEM.9.PeriphInc=DMA_PINC_ENABLE +Dma.MEMTOMEM.9.Priority=DMA_PRIORITY_LOW +Dma.MEMTOMEM.9.RequestParameters=Instance,Direction,PeriphInc,MemInc,PeriphDataAlignment,MemDataAlignment,Mode,Priority,FIFOMode,FIFOThreshold,MemBurst,PeriphBurst +Dma.Request0=USART3_RX +Dma.Request1=USART3_TX +Dma.Request10=UART4_RX +Dma.Request11=UART4_TX +Dma.Request12=SPI1_RX +Dma.Request13=SPI1_TX +Dma.Request2=USART2_RX +Dma.Request3=USART2_TX +Dma.Request4=USART1_RX +Dma.Request5=USART1_TX +Dma.Request6=USART6_RX +Dma.Request7=USART6_TX +Dma.Request8=MEMTOMEM +Dma.Request9=MEMTOMEM Dma.RequestsNb=14 -Dma.UART4_RX.0.Direction=DMA_PERIPH_TO_MEMORY -Dma.UART4_RX.0.FIFOMode=DMA_FIFOMODE_DISABLE -Dma.UART4_RX.0.Instance=DMA1_Stream2 -Dma.UART4_RX.0.MemDataAlignment=DMA_MDATAALIGN_BYTE -Dma.UART4_RX.0.MemInc=DMA_MINC_ENABLE -Dma.UART4_RX.0.Mode=DMA_NORMAL -Dma.UART4_RX.0.PeriphDataAlignment=DMA_PDATAALIGN_BYTE -Dma.UART4_RX.0.PeriphInc=DMA_PINC_DISABLE -Dma.UART4_RX.0.Priority=DMA_PRIORITY_LOW -Dma.UART4_RX.0.RequestParameters=Instance,Direction,PeriphInc,MemInc,PeriphDataAlignment,MemDataAlignment,Mode,Priority,FIFOMode -Dma.UART4_TX.1.Direction=DMA_MEMORY_TO_PERIPH -Dma.UART4_TX.1.FIFOMode=DMA_FIFOMODE_DISABLE -Dma.UART4_TX.1.Instance=DMA1_Stream4 -Dma.UART4_TX.1.MemDataAlignment=DMA_MDATAALIGN_BYTE -Dma.UART4_TX.1.MemInc=DMA_MINC_ENABLE -Dma.UART4_TX.1.Mode=DMA_NORMAL -Dma.UART4_TX.1.PeriphDataAlignment=DMA_PDATAALIGN_BYTE -Dma.UART4_TX.1.PeriphInc=DMA_PINC_DISABLE -Dma.UART4_TX.1.Priority=DMA_PRIORITY_LOW -Dma.UART4_TX.1.RequestParameters=Instance,Direction,PeriphInc,MemInc,PeriphDataAlignment,MemDataAlignment,Mode,Priority,FIFOMode -Dma.UART5_RX.4.Direction=DMA_PERIPH_TO_MEMORY -Dma.UART5_RX.4.FIFOMode=DMA_FIFOMODE_DISABLE -Dma.UART5_RX.4.Instance=DMA1_Stream0 -Dma.UART5_RX.4.MemDataAlignment=DMA_MDATAALIGN_BYTE -Dma.UART5_RX.4.MemInc=DMA_MINC_ENABLE -Dma.UART5_RX.4.Mode=DMA_NORMAL -Dma.UART5_RX.4.PeriphDataAlignment=DMA_PDATAALIGN_BYTE -Dma.UART5_RX.4.PeriphInc=DMA_PINC_DISABLE -Dma.UART5_RX.4.Priority=DMA_PRIORITY_MEDIUM -Dma.UART5_RX.4.RequestParameters=Instance,Direction,PeriphInc,MemInc,PeriphDataAlignment,MemDataAlignment,Mode,Priority,FIFOMode -Dma.UART5_TX.5.Direction=DMA_MEMORY_TO_PERIPH -Dma.UART5_TX.5.FIFOMode=DMA_FIFOMODE_DISABLE -Dma.UART5_TX.5.Instance=DMA1_Stream7 -Dma.UART5_TX.5.MemDataAlignment=DMA_MDATAALIGN_BYTE -Dma.UART5_TX.5.MemInc=DMA_MINC_ENABLE -Dma.UART5_TX.5.Mode=DMA_NORMAL -Dma.UART5_TX.5.PeriphDataAlignment=DMA_PDATAALIGN_BYTE -Dma.UART5_TX.5.PeriphInc=DMA_PINC_DISABLE -Dma.UART5_TX.5.Priority=DMA_PRIORITY_MEDIUM -Dma.UART5_TX.5.RequestParameters=Instance,Direction,PeriphInc,MemInc,PeriphDataAlignment,MemDataAlignment,Mode,Priority,FIFOMode -Dma.USART1_RX.8.Direction=DMA_PERIPH_TO_MEMORY -Dma.USART1_RX.8.FIFOMode=DMA_FIFOMODE_DISABLE -Dma.USART1_RX.8.Instance=DMA2_Stream2 -Dma.USART1_RX.8.MemDataAlignment=DMA_MDATAALIGN_BYTE -Dma.USART1_RX.8.MemInc=DMA_MINC_ENABLE -Dma.USART1_RX.8.Mode=DMA_NORMAL -Dma.USART1_RX.8.PeriphDataAlignment=DMA_PDATAALIGN_BYTE -Dma.USART1_RX.8.PeriphInc=DMA_PINC_DISABLE -Dma.USART1_RX.8.Priority=DMA_PRIORITY_MEDIUM -Dma.USART1_RX.8.RequestParameters=Instance,Direction,PeriphInc,MemInc,PeriphDataAlignment,MemDataAlignment,Mode,Priority,FIFOMode -Dma.USART1_TX.9.Direction=DMA_MEMORY_TO_PERIPH -Dma.USART1_TX.9.FIFOMode=DMA_FIFOMODE_DISABLE -Dma.USART1_TX.9.Instance=DMA2_Stream7 -Dma.USART1_TX.9.MemDataAlignment=DMA_MDATAALIGN_BYTE -Dma.USART1_TX.9.MemInc=DMA_MINC_ENABLE -Dma.USART1_TX.9.Mode=DMA_NORMAL -Dma.USART1_TX.9.PeriphDataAlignment=DMA_PDATAALIGN_BYTE -Dma.USART1_TX.9.PeriphInc=DMA_PINC_DISABLE -Dma.USART1_TX.9.Priority=DMA_PRIORITY_MEDIUM -Dma.USART1_TX.9.RequestParameters=Instance,Direction,PeriphInc,MemInc,PeriphDataAlignment,MemDataAlignment,Mode,Priority,FIFOMode -Dma.USART2_RX.6.Direction=DMA_PERIPH_TO_MEMORY -Dma.USART2_RX.6.FIFOMode=DMA_FIFOMODE_DISABLE -Dma.USART2_RX.6.Instance=DMA1_Stream5 -Dma.USART2_RX.6.MemDataAlignment=DMA_MDATAALIGN_BYTE -Dma.USART2_RX.6.MemInc=DMA_MINC_ENABLE -Dma.USART2_RX.6.Mode=DMA_NORMAL -Dma.USART2_RX.6.PeriphDataAlignment=DMA_PDATAALIGN_BYTE -Dma.USART2_RX.6.PeriphInc=DMA_PINC_DISABLE -Dma.USART2_RX.6.Priority=DMA_PRIORITY_MEDIUM -Dma.USART2_RX.6.RequestParameters=Instance,Direction,PeriphInc,MemInc,PeriphDataAlignment,MemDataAlignment,Mode,Priority,FIFOMode -Dma.USART2_TX.7.Direction=DMA_MEMORY_TO_PERIPH -Dma.USART2_TX.7.FIFOMode=DMA_FIFOMODE_DISABLE -Dma.USART2_TX.7.Instance=DMA1_Stream6 -Dma.USART2_TX.7.MemDataAlignment=DMA_MDATAALIGN_BYTE -Dma.USART2_TX.7.MemInc=DMA_MINC_ENABLE -Dma.USART2_TX.7.Mode=DMA_NORMAL -Dma.USART2_TX.7.PeriphDataAlignment=DMA_PDATAALIGN_BYTE -Dma.USART2_TX.7.PeriphInc=DMA_PINC_DISABLE -Dma.USART2_TX.7.Priority=DMA_PRIORITY_MEDIUM -Dma.USART2_TX.7.RequestParameters=Instance,Direction,PeriphInc,MemInc,PeriphDataAlignment,MemDataAlignment,Mode,Priority,FIFOMode -Dma.USART3_RX.2.Direction=DMA_PERIPH_TO_MEMORY -Dma.USART3_RX.2.FIFOMode=DMA_FIFOMODE_DISABLE -Dma.USART3_RX.2.Instance=DMA1_Stream1 -Dma.USART3_RX.2.MemDataAlignment=DMA_MDATAALIGN_BYTE -Dma.USART3_RX.2.MemInc=DMA_MINC_ENABLE -Dma.USART3_RX.2.Mode=DMA_NORMAL -Dma.USART3_RX.2.PeriphDataAlignment=DMA_PDATAALIGN_BYTE -Dma.USART3_RX.2.PeriphInc=DMA_PINC_DISABLE -Dma.USART3_RX.2.Priority=DMA_PRIORITY_MEDIUM -Dma.USART3_RX.2.RequestParameters=Instance,Direction,PeriphInc,MemInc,PeriphDataAlignment,MemDataAlignment,Mode,Priority,FIFOMode -Dma.USART3_TX.3.Direction=DMA_MEMORY_TO_PERIPH -Dma.USART3_TX.3.FIFOMode=DMA_FIFOMODE_DISABLE -Dma.USART3_TX.3.Instance=DMA1_Stream3 -Dma.USART3_TX.3.MemDataAlignment=DMA_MDATAALIGN_BYTE -Dma.USART3_TX.3.MemInc=DMA_MINC_ENABLE -Dma.USART3_TX.3.Mode=DMA_NORMAL -Dma.USART3_TX.3.PeriphDataAlignment=DMA_PDATAALIGN_BYTE -Dma.USART3_TX.3.PeriphInc=DMA_PINC_DISABLE -Dma.USART3_TX.3.Priority=DMA_PRIORITY_MEDIUM -Dma.USART3_TX.3.RequestParameters=Instance,Direction,PeriphInc,MemInc,PeriphDataAlignment,MemDataAlignment,Mode,Priority,FIFOMode -Dma.USART6_RX.10.Direction=DMA_PERIPH_TO_MEMORY -Dma.USART6_RX.10.FIFOMode=DMA_FIFOMODE_DISABLE -Dma.USART6_RX.10.Instance=DMA2_Stream1 -Dma.USART6_RX.10.MemDataAlignment=DMA_MDATAALIGN_BYTE -Dma.USART6_RX.10.MemInc=DMA_MINC_ENABLE -Dma.USART6_RX.10.Mode=DMA_NORMAL -Dma.USART6_RX.10.PeriphDataAlignment=DMA_PDATAALIGN_BYTE -Dma.USART6_RX.10.PeriphInc=DMA_PINC_DISABLE -Dma.USART6_RX.10.Priority=DMA_PRIORITY_MEDIUM -Dma.USART6_RX.10.RequestParameters=Instance,Direction,PeriphInc,MemInc,PeriphDataAlignment,MemDataAlignment,Mode,Priority,FIFOMode -Dma.USART6_TX.11.Direction=DMA_MEMORY_TO_PERIPH -Dma.USART6_TX.11.FIFOMode=DMA_FIFOMODE_DISABLE -Dma.USART6_TX.11.Instance=DMA2_Stream6 -Dma.USART6_TX.11.MemDataAlignment=DMA_MDATAALIGN_BYTE -Dma.USART6_TX.11.MemInc=DMA_MINC_ENABLE -Dma.USART6_TX.11.Mode=DMA_NORMAL -Dma.USART6_TX.11.PeriphDataAlignment=DMA_PDATAALIGN_BYTE -Dma.USART6_TX.11.PeriphInc=DMA_PINC_DISABLE -Dma.USART6_TX.11.Priority=DMA_PRIORITY_MEDIUM -Dma.USART6_TX.11.RequestParameters=Instance,Direction,PeriphInc,MemInc,PeriphDataAlignment,MemDataAlignment,Mode,Priority,FIFOMode +Dma.SPI1_RX.12.Direction=DMA_PERIPH_TO_MEMORY +Dma.SPI1_RX.12.FIFOMode=DMA_FIFOMODE_DISABLE +Dma.SPI1_RX.12.Instance=DMA2_Stream0 +Dma.SPI1_RX.12.MemDataAlignment=DMA_MDATAALIGN_BYTE +Dma.SPI1_RX.12.MemInc=DMA_MINC_ENABLE +Dma.SPI1_RX.12.Mode=DMA_NORMAL +Dma.SPI1_RX.12.PeriphDataAlignment=DMA_PDATAALIGN_BYTE +Dma.SPI1_RX.12.PeriphInc=DMA_PINC_DISABLE +Dma.SPI1_RX.12.Priority=DMA_PRIORITY_LOW +Dma.SPI1_RX.12.RequestParameters=Instance,Direction,PeriphInc,MemInc,PeriphDataAlignment,MemDataAlignment,Mode,Priority,FIFOMode +Dma.SPI1_TX.13.Direction=DMA_MEMORY_TO_PERIPH +Dma.SPI1_TX.13.FIFOMode=DMA_FIFOMODE_DISABLE +Dma.SPI1_TX.13.Instance=DMA2_Stream5 +Dma.SPI1_TX.13.MemDataAlignment=DMA_MDATAALIGN_BYTE +Dma.SPI1_TX.13.MemInc=DMA_MINC_ENABLE +Dma.SPI1_TX.13.Mode=DMA_NORMAL +Dma.SPI1_TX.13.PeriphDataAlignment=DMA_PDATAALIGN_BYTE +Dma.SPI1_TX.13.PeriphInc=DMA_PINC_DISABLE +Dma.SPI1_TX.13.Priority=DMA_PRIORITY_LOW +Dma.SPI1_TX.13.RequestParameters=Instance,Direction,PeriphInc,MemInc,PeriphDataAlignment,MemDataAlignment,Mode,Priority,FIFOMode +Dma.UART4_RX.10.Direction=DMA_PERIPH_TO_MEMORY +Dma.UART4_RX.10.FIFOMode=DMA_FIFOMODE_DISABLE +Dma.UART4_RX.10.Instance=DMA1_Stream2 +Dma.UART4_RX.10.MemDataAlignment=DMA_MDATAALIGN_BYTE +Dma.UART4_RX.10.MemInc=DMA_MINC_ENABLE +Dma.UART4_RX.10.Mode=DMA_NORMAL +Dma.UART4_RX.10.PeriphDataAlignment=DMA_PDATAALIGN_BYTE +Dma.UART4_RX.10.PeriphInc=DMA_PINC_DISABLE +Dma.UART4_RX.10.Priority=DMA_PRIORITY_LOW +Dma.UART4_RX.10.RequestParameters=Instance,Direction,PeriphInc,MemInc,PeriphDataAlignment,MemDataAlignment,Mode,Priority,FIFOMode +Dma.UART4_TX.11.Direction=DMA_MEMORY_TO_PERIPH +Dma.UART4_TX.11.FIFOMode=DMA_FIFOMODE_DISABLE +Dma.UART4_TX.11.Instance=DMA1_Stream4 +Dma.UART4_TX.11.MemDataAlignment=DMA_MDATAALIGN_BYTE +Dma.UART4_TX.11.MemInc=DMA_MINC_ENABLE +Dma.UART4_TX.11.Mode=DMA_NORMAL +Dma.UART4_TX.11.PeriphDataAlignment=DMA_PDATAALIGN_BYTE +Dma.UART4_TX.11.PeriphInc=DMA_PINC_DISABLE +Dma.UART4_TX.11.Priority=DMA_PRIORITY_LOW +Dma.UART4_TX.11.RequestParameters=Instance,Direction,PeriphInc,MemInc,PeriphDataAlignment,MemDataAlignment,Mode,Priority,FIFOMode +Dma.USART1_RX.4.Direction=DMA_PERIPH_TO_MEMORY +Dma.USART1_RX.4.FIFOMode=DMA_FIFOMODE_DISABLE +Dma.USART1_RX.4.Instance=DMA2_Stream2 +Dma.USART1_RX.4.MemDataAlignment=DMA_MDATAALIGN_BYTE +Dma.USART1_RX.4.MemInc=DMA_MINC_ENABLE +Dma.USART1_RX.4.Mode=DMA_NORMAL +Dma.USART1_RX.4.PeriphDataAlignment=DMA_PDATAALIGN_BYTE +Dma.USART1_RX.4.PeriphInc=DMA_PINC_DISABLE +Dma.USART1_RX.4.Priority=DMA_PRIORITY_MEDIUM +Dma.USART1_RX.4.RequestParameters=Instance,Direction,PeriphInc,MemInc,PeriphDataAlignment,MemDataAlignment,Mode,Priority,FIFOMode +Dma.USART1_TX.5.Direction=DMA_MEMORY_TO_PERIPH +Dma.USART1_TX.5.FIFOMode=DMA_FIFOMODE_DISABLE +Dma.USART1_TX.5.Instance=DMA2_Stream7 +Dma.USART1_TX.5.MemDataAlignment=DMA_MDATAALIGN_BYTE +Dma.USART1_TX.5.MemInc=DMA_MINC_ENABLE +Dma.USART1_TX.5.Mode=DMA_NORMAL +Dma.USART1_TX.5.PeriphDataAlignment=DMA_PDATAALIGN_BYTE +Dma.USART1_TX.5.PeriphInc=DMA_PINC_DISABLE +Dma.USART1_TX.5.Priority=DMA_PRIORITY_MEDIUM +Dma.USART1_TX.5.RequestParameters=Instance,Direction,PeriphInc,MemInc,PeriphDataAlignment,MemDataAlignment,Mode,Priority,FIFOMode +Dma.USART2_RX.2.Direction=DMA_PERIPH_TO_MEMORY +Dma.USART2_RX.2.FIFOMode=DMA_FIFOMODE_DISABLE +Dma.USART2_RX.2.Instance=DMA1_Stream5 +Dma.USART2_RX.2.MemDataAlignment=DMA_MDATAALIGN_BYTE +Dma.USART2_RX.2.MemInc=DMA_MINC_ENABLE +Dma.USART2_RX.2.Mode=DMA_NORMAL +Dma.USART2_RX.2.PeriphDataAlignment=DMA_PDATAALIGN_BYTE +Dma.USART2_RX.2.PeriphInc=DMA_PINC_DISABLE +Dma.USART2_RX.2.Priority=DMA_PRIORITY_MEDIUM +Dma.USART2_RX.2.RequestParameters=Instance,Direction,PeriphInc,MemInc,PeriphDataAlignment,MemDataAlignment,Mode,Priority,FIFOMode +Dma.USART2_TX.3.Direction=DMA_MEMORY_TO_PERIPH +Dma.USART2_TX.3.FIFOMode=DMA_FIFOMODE_DISABLE +Dma.USART2_TX.3.Instance=DMA1_Stream6 +Dma.USART2_TX.3.MemDataAlignment=DMA_MDATAALIGN_BYTE +Dma.USART2_TX.3.MemInc=DMA_MINC_ENABLE +Dma.USART2_TX.3.Mode=DMA_NORMAL +Dma.USART2_TX.3.PeriphDataAlignment=DMA_PDATAALIGN_BYTE +Dma.USART2_TX.3.PeriphInc=DMA_PINC_DISABLE +Dma.USART2_TX.3.Priority=DMA_PRIORITY_MEDIUM +Dma.USART2_TX.3.RequestParameters=Instance,Direction,PeriphInc,MemInc,PeriphDataAlignment,MemDataAlignment,Mode,Priority,FIFOMode +Dma.USART3_RX.0.Direction=DMA_PERIPH_TO_MEMORY +Dma.USART3_RX.0.FIFOMode=DMA_FIFOMODE_DISABLE +Dma.USART3_RX.0.Instance=DMA1_Stream1 +Dma.USART3_RX.0.MemDataAlignment=DMA_MDATAALIGN_BYTE +Dma.USART3_RX.0.MemInc=DMA_MINC_ENABLE +Dma.USART3_RX.0.Mode=DMA_NORMAL +Dma.USART3_RX.0.PeriphDataAlignment=DMA_PDATAALIGN_BYTE +Dma.USART3_RX.0.PeriphInc=DMA_PINC_DISABLE +Dma.USART3_RX.0.Priority=DMA_PRIORITY_MEDIUM +Dma.USART3_RX.0.RequestParameters=Instance,Direction,PeriphInc,MemInc,PeriphDataAlignment,MemDataAlignment,Mode,Priority,FIFOMode +Dma.USART3_TX.1.Direction=DMA_MEMORY_TO_PERIPH +Dma.USART3_TX.1.FIFOMode=DMA_FIFOMODE_DISABLE +Dma.USART3_TX.1.Instance=DMA1_Stream3 +Dma.USART3_TX.1.MemDataAlignment=DMA_MDATAALIGN_BYTE +Dma.USART3_TX.1.MemInc=DMA_MINC_ENABLE +Dma.USART3_TX.1.Mode=DMA_NORMAL +Dma.USART3_TX.1.PeriphDataAlignment=DMA_PDATAALIGN_BYTE +Dma.USART3_TX.1.PeriphInc=DMA_PINC_DISABLE +Dma.USART3_TX.1.Priority=DMA_PRIORITY_MEDIUM +Dma.USART3_TX.1.RequestParameters=Instance,Direction,PeriphInc,MemInc,PeriphDataAlignment,MemDataAlignment,Mode,Priority,FIFOMode +Dma.USART6_RX.6.Direction=DMA_PERIPH_TO_MEMORY +Dma.USART6_RX.6.FIFOMode=DMA_FIFOMODE_DISABLE +Dma.USART6_RX.6.Instance=DMA2_Stream1 +Dma.USART6_RX.6.MemDataAlignment=DMA_MDATAALIGN_BYTE +Dma.USART6_RX.6.MemInc=DMA_MINC_ENABLE +Dma.USART6_RX.6.Mode=DMA_NORMAL +Dma.USART6_RX.6.PeriphDataAlignment=DMA_PDATAALIGN_BYTE +Dma.USART6_RX.6.PeriphInc=DMA_PINC_DISABLE +Dma.USART6_RX.6.Priority=DMA_PRIORITY_MEDIUM +Dma.USART6_RX.6.RequestParameters=Instance,Direction,PeriphInc,MemInc,PeriphDataAlignment,MemDataAlignment,Mode,Priority,FIFOMode +Dma.USART6_TX.7.Direction=DMA_MEMORY_TO_PERIPH +Dma.USART6_TX.7.FIFOMode=DMA_FIFOMODE_DISABLE +Dma.USART6_TX.7.Instance=DMA2_Stream6 +Dma.USART6_TX.7.MemDataAlignment=DMA_MDATAALIGN_BYTE +Dma.USART6_TX.7.MemInc=DMA_MINC_ENABLE +Dma.USART6_TX.7.Mode=DMA_NORMAL +Dma.USART6_TX.7.PeriphDataAlignment=DMA_PDATAALIGN_BYTE +Dma.USART6_TX.7.PeriphInc=DMA_PINC_DISABLE +Dma.USART6_TX.7.Priority=DMA_PRIORITY_MEDIUM +Dma.USART6_TX.7.RequestParameters=Instance,Direction,PeriphInc,MemInc,PeriphDataAlignment,MemDataAlignment,Mode,Priority,FIFOMode +FATFS.IPParameters=_USE_MKFS,_USE_LFN,_LFN_UNICODE,_FS_TINY,_FS_LOCK,USE_DMA_CODE_SD +FATFS.USE_DMA_CODE_SD=0 +FATFS._FS_LOCK=3 +FATFS._FS_TINY=0 +FATFS._LFN_UNICODE=1 +FATFS._USE_LFN=1 +FATFS._USE_MKFS=0 File.Version=6 KeepUserPlacement=false Mcu.Family=STM32F4 Mcu.IP0=CRC Mcu.IP1=DMA -Mcu.IP10=USART3 -Mcu.IP11=USART6 -Mcu.IP2=NVIC -Mcu.IP3=RCC -Mcu.IP4=SPI1 -Mcu.IP5=SYS -Mcu.IP6=UART4 -Mcu.IP7=UART5 -Mcu.IP8=USART1 -Mcu.IP9=USART2 -Mcu.IPNb=12 +Mcu.IP10=UART4 +Mcu.IP11=USART1 +Mcu.IP12=USART2 +Mcu.IP13=USART3 +Mcu.IP14=USART6 +Mcu.IP15=USB_OTG_FS +Mcu.IP2=FATFS +Mcu.IP3=FSMC +Mcu.IP4=NVIC +Mcu.IP5=RCC +Mcu.IP6=SDIO +Mcu.IP7=SPI1 +Mcu.IP8=SPI2 +Mcu.IP9=SYS +Mcu.IPNb=16 Mcu.Name=STM32F407V(E-G)Tx Mcu.Package=LQFP100 -Mcu.Pin0=PC14-OSC32_IN -Mcu.Pin1=PC15-OSC32_OUT -Mcu.Pin10=PB11 -Mcu.Pin11=PC6 -Mcu.Pin12=PC7 -Mcu.Pin13=PA9 -Mcu.Pin14=PA10 -Mcu.Pin15=PA13 -Mcu.Pin16=PA14 -Mcu.Pin17=PC10 -Mcu.Pin18=PC11 -Mcu.Pin19=PC12 -Mcu.Pin2=PH0-OSC_IN -Mcu.Pin20=PD2 -Mcu.Pin21=PD4 -Mcu.Pin22=PD5 -Mcu.Pin23=PD6 -Mcu.Pin24=PD7 -Mcu.Pin25=PB3 -Mcu.Pin26=PB4 -Mcu.Pin27=PB5 -Mcu.Pin28=VP_CRC_VS_CRC -Mcu.Pin29=VP_SYS_VS_Systick -Mcu.Pin3=PH1-OSC_OUT -Mcu.Pin4=PA2 -Mcu.Pin5=PA3 -Mcu.Pin6=PA6 -Mcu.Pin7=PA7 -Mcu.Pin8=PB0 -Mcu.Pin9=PB10 -Mcu.PinsNb=30 +Mcu.Pin0=PE3 +Mcu.Pin1=PE4 +Mcu.Pin10=PA0-WKUP +Mcu.Pin11=PA1 +Mcu.Pin12=PA2 +Mcu.Pin13=PA3 +Mcu.Pin14=PA6 +Mcu.Pin15=PA7 +Mcu.Pin16=PB0 +Mcu.Pin17=PE7 +Mcu.Pin18=PE8 +Mcu.Pin19=PE9 +Mcu.Pin2=PC14-OSC32_IN +Mcu.Pin20=PE10 +Mcu.Pin21=PE11 +Mcu.Pin22=PE12 +Mcu.Pin23=PE13 +Mcu.Pin24=PE14 +Mcu.Pin25=PE15 +Mcu.Pin26=PB10 +Mcu.Pin27=PB11 +Mcu.Pin28=PB12 +Mcu.Pin29=PB13 +Mcu.Pin3=PC15-OSC32_OUT +Mcu.Pin30=PB14 +Mcu.Pin31=PB15 +Mcu.Pin32=PD8 +Mcu.Pin33=PD9 +Mcu.Pin34=PD10 +Mcu.Pin35=PD13 +Mcu.Pin36=PD14 +Mcu.Pin37=PD15 +Mcu.Pin38=PC6 +Mcu.Pin39=PC7 +Mcu.Pin4=PH0-OSC_IN +Mcu.Pin40=PC8 +Mcu.Pin41=PC9 +Mcu.Pin42=PA9 +Mcu.Pin43=PA10 +Mcu.Pin44=PA11 +Mcu.Pin45=PA12 +Mcu.Pin46=PA13 +Mcu.Pin47=PA14 +Mcu.Pin48=PC10 +Mcu.Pin49=PC11 +Mcu.Pin5=PH1-OSC_OUT +Mcu.Pin50=PC12 +Mcu.Pin51=PD0 +Mcu.Pin52=PD1 +Mcu.Pin53=PD2 +Mcu.Pin54=PD4 +Mcu.Pin55=PD5 +Mcu.Pin56=PD7 +Mcu.Pin57=PB3 +Mcu.Pin58=PB4 +Mcu.Pin59=PB5 +Mcu.Pin6=PC0 +Mcu.Pin60=PB6 +Mcu.Pin61=PB7 +Mcu.Pin62=PB8 +Mcu.Pin63=VP_CRC_VS_CRC +Mcu.Pin64=VP_FATFS_VS_SDIO +Mcu.Pin65=VP_SYS_VS_Systick +Mcu.Pin7=PC1 +Mcu.Pin8=PC2 +Mcu.Pin9=PC3 +Mcu.PinsNb=66 Mcu.ThirdPartyNb=0 Mcu.UserConstants= Mcu.UserName=STM32F407VETx MxCube.Version=5.3.0 MxDb.Version=DB.5.0.30 NVIC.BusFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false -NVIC.DMA1_Stream0_IRQn=true\:0\:0\:false\:false\:true\:false\:true NVIC.DMA1_Stream1_IRQn=true\:0\:0\:false\:false\:true\:false\:true NVIC.DMA1_Stream2_IRQn=true\:0\:0\:false\:false\:true\:false\:true NVIC.DMA1_Stream3_IRQn=true\:0\:0\:false\:false\:true\:false\:true NVIC.DMA1_Stream4_IRQn=true\:0\:0\:false\:false\:true\:false\:true NVIC.DMA1_Stream5_IRQn=true\:0\:0\:false\:false\:true\:false\:true NVIC.DMA1_Stream6_IRQn=true\:0\:0\:false\:false\:true\:false\:true -NVIC.DMA1_Stream7_IRQn=true\:0\:0\:false\:false\:true\:false\:true NVIC.DMA2_Stream0_IRQn=true\:0\:0\:false\:false\:true\:true\:true NVIC.DMA2_Stream1_IRQn=true\:0\:0\:false\:false\:true\:false\:true NVIC.DMA2_Stream2_IRQn=true\:0\:0\:false\:false\:true\:false\:true +NVIC.DMA2_Stream3_IRQn=true\:0\:0\:false\:false\:true\:true\:true NVIC.DMA2_Stream4_IRQn=true\:0\:0\:false\:false\:true\:true\:true +NVIC.DMA2_Stream5_IRQn=true\:0\:0\:false\:false\:true\:false\:true NVIC.DMA2_Stream6_IRQn=true\:0\:0\:false\:false\:true\:false\:true NVIC.DMA2_Stream7_IRQn=true\:0\:0\:false\:false\:true\:false\:true NVIC.DebugMonitor_IRQn=true\:0\:0\:false\:false\:true\:false\:false @@ -235,17 +282,26 @@ NVIC.MemoryManagement_IRQn=true\:0\:0\:false\:false\:true\:false\:false NVIC.NonMaskableInt_IRQn=true\:0\:0\:false\:false\:true\:false\:false NVIC.PendSV_IRQn=true\:0\:0\:false\:false\:true\:false\:false NVIC.PriorityGroup=NVIC_PRIORITYGROUP_4 +NVIC.SPI1_IRQn=true\:0\:0\:false\:false\:true\:true\:true +NVIC.SPI2_IRQn=true\:0\:0\:false\:false\:true\:true\:true NVIC.SVCall_IRQn=true\:0\:0\:false\:false\:true\:false\:false NVIC.SysTick_IRQn=true\:0\:0\:false\:false\:true\:false\:true NVIC.UART4_IRQn=true\:0\:0\:false\:false\:true\:true\:true -NVIC.UART5_IRQn=true\:0\:0\:false\:false\:true\:true\:true NVIC.USART1_IRQn=true\:0\:0\:false\:false\:true\:true\:true NVIC.USART2_IRQn=true\:0\:0\:false\:false\:true\:true\:true NVIC.USART3_IRQn=true\:0\:0\:false\:false\:true\:true\:true NVIC.USART6_IRQn=true\:0\:0\:false\:false\:true\:true\:true NVIC.UsageFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false +PA0-WKUP.Mode=Asynchronous +PA0-WKUP.Signal=UART4_TX +PA1.Mode=Asynchronous +PA1.Signal=UART4_RX PA10.Mode=Asynchronous PA10.Signal=USART1_RX +PA11.Mode=Device_Only +PA11.Signal=USB_OTG_FS_DM +PA12.Mode=Device_Only +PA12.Signal=USB_OTG_FS_DP PA13.Mode=Serial_Wire PA13.Signal=SYS_JTMS-SWDIO PA14.Mode=Serial_Wire @@ -272,31 +328,72 @@ PB10.Mode=Asynchronous PB10.Signal=USART3_TX PB11.Mode=Asynchronous PB11.Signal=USART3_RX +PB12.GPIOParameters=GPIO_Label +PB12.GPIO_Label=T_CS +PB12.Locked=true +PB12.Signal=GPIO_Output +PB13.Locked=true +PB13.Mode=Full_Duplex_Master +PB13.Signal=SPI2_SCK +PB14.Locked=true +PB14.Mode=Full_Duplex_Master +PB14.Signal=SPI2_MISO +PB15.Locked=true +PB15.Mode=Full_Duplex_Master +PB15.Signal=SPI2_MOSI PB3.Locked=true PB3.Mode=Full_Duplex_Master PB3.Signal=SPI1_SCK -PB4.Locked=true PB4.Mode=Full_Duplex_Master PB4.Signal=SPI1_MISO -PB5.Locked=true PB5.Mode=Full_Duplex_Master PB5.Signal=SPI1_MOSI -PC10.Locked=true -PC10.Mode=Asynchronous -PC10.Signal=UART4_TX -PC11.Locked=true -PC11.Mode=Asynchronous -PC11.Signal=UART4_RX -PC12.Mode=Asynchronous -PC12.Signal=UART5_TX +PB6.GPIOParameters=GPIO_Label +PB6.GPIO_Label=NRF_CE +PB6.Locked=true +PB6.Signal=GPIO_Output +PB7.GPIOParameters=GPIO_Label +PB7.GPIO_Label=NRF_CS +PB7.Locked=true +PB7.Signal=GPIO_Output +PB8.GPIOParameters=GPIO_Label +PB8.GPIO_Label=NRF_IRQ +PB8.Locked=true +PB8.Signal=GPIO_Input +PC0.GPIOParameters=GPIO_Label +PC0.GPIO_Label=DEBUG0 +PC0.Locked=true +PC0.Signal=GPIO_Output +PC1.GPIOParameters=GPIO_Label +PC1.GPIO_Label=DEBUG1 +PC1.Locked=true +PC1.Signal=GPIO_Output +PC10.Mode=SD_4_bits_Wide_bus +PC10.Signal=SDIO_D2 +PC11.Mode=SD_4_bits_Wide_bus +PC11.Signal=SDIO_D3 +PC12.Mode=SD_4_bits_Wide_bus +PC12.Signal=SDIO_CK PC14-OSC32_IN.Mode=LSE-External-Oscillator PC14-OSC32_IN.Signal=RCC_OSC32_IN PC15-OSC32_OUT.Mode=LSE-External-Oscillator PC15-OSC32_OUT.Signal=RCC_OSC32_OUT +PC2.GPIOParameters=GPIO_Label +PC2.GPIO_Label=DEBUG2 +PC2.Locked=true +PC2.Signal=GPIO_Output +PC3.GPIOParameters=GPIO_Label +PC3.GPIO_Label=DEBUG3 +PC3.Locked=true +PC3.Signal=GPIO_Output PC6.Mode=Asynchronous PC6.Signal=USART6_TX PC7.Mode=Asynchronous PC7.Signal=USART6_RX +PC8.Mode=SD_4_bits_Wide_bus +PC8.Signal=SDIO_D0 +PC9.Mode=SD_4_bits_Wide_bus +PC9.Signal=SDIO_D1 PCC.Checker=false PCC.Line=STM32F407/417 PCC.MCU=STM32F407V(E-G)Tx @@ -305,24 +402,58 @@ PCC.Seq0=0 PCC.Series=STM32F4 PCC.Temperature=25 PCC.Vdd=3.3 -PD2.Mode=Asynchronous -PD2.Signal=UART5_RX -PD4.GPIOParameters=GPIO_Label -PD4.GPIO_Label=DIAG0 -PD4.Locked=true -PD4.Signal=GPIO_Output -PD5.GPIOParameters=GPIO_Label -PD5.GPIO_Label=DIAG1 -PD5.Locked=true -PD5.Signal=GPIO_Output -PD6.GPIOParameters=GPIO_Label -PD6.GPIO_Label=DIAG2 -PD6.Locked=true -PD6.Signal=GPIO_Output -PD7.GPIOParameters=GPIO_Label -PD7.GPIO_Label=DIAG3 -PD7.Locked=true -PD7.Signal=GPIO_Output +PD0.Mode=16b-d1 +PD0.Signal=FSMC_D2 +PD1.Mode=16b-d1 +PD1.Signal=FSMC_D3 +PD10.Mode=16b-d1 +PD10.Signal=FSMC_D15 +PD13.Mode=A18_1 +PD13.Signal=FSMC_A18 +PD14.Mode=16b-d1 +PD14.Signal=FSMC_D0 +PD15.Mode=16b-d1 +PD15.Signal=FSMC_D1 +PD2.Mode=SD_4_bits_Wide_bus +PD2.Signal=SDIO_CMD +PD4.Mode=Lcd1 +PD4.Signal=FSMC_NOE +PD5.Mode=Lcd1 +PD5.Signal=FSMC_NWE +PD7.Mode=NorPsramChipSelect1_1 +PD7.Signal=FSMC_NE1 +PD8.Mode=16b-d1 +PD8.Signal=FSMC_D13 +PD9.Mode=16b-d1 +PD9.Signal=FSMC_D14 +PE10.Mode=16b-d1 +PE10.Signal=FSMC_D7 +PE11.Mode=16b-d1 +PE11.Signal=FSMC_D8 +PE12.Mode=16b-d1 +PE12.Signal=FSMC_D9 +PE13.Mode=16b-d1 +PE13.Signal=FSMC_D10 +PE14.Mode=16b-d1 +PE14.Signal=FSMC_D11 +PE15.Mode=16b-d1 +PE15.Signal=FSMC_D12 +PE3.GPIOParameters=GPIO_PuPd,GPIO_Label +PE3.GPIO_Label=KEY1 +PE3.GPIO_PuPd=GPIO_PULLUP +PE3.Locked=true +PE3.Signal=GPIO_Input +PE4.GPIOParameters=GPIO_PuPd,GPIO_Label +PE4.GPIO_Label=KEY0 +PE4.GPIO_PuPd=GPIO_PULLUP +PE4.Locked=true +PE4.Signal=GPIO_Input +PE7.Mode=16b-d1 +PE7.Signal=FSMC_D4 +PE8.Mode=16b-d1 +PE8.Signal=FSMC_D5 +PE9.Mode=16b-d1 +PE9.Signal=FSMC_D6 PH0-OSC_IN.Mode=HSE-External-Oscillator PH0-OSC_IN.Signal=RCC_OSC_IN PH1-OSC_OUT.Mode=HSE-External-Oscillator @@ -354,8 +485,8 @@ ProjectManager.StackSize=0x400 ProjectManager.TargetToolchain=STM32CubeIDE ProjectManager.ToolChainLocation= ProjectManager.UnderRoot=true -ProjectManager.functionlistsort=1-MX_GPIO_Init-GPIO-false-LL-true,2-MX_DMA_Init-DMA-false-LL-true,3-SystemClock_Config-RCC-false-HAL-false,4-MX_SPI1_Init-SPI1-false-LL-true,5-MX_UART4_Init-UART4-false-LL-true,6-MX_UART5_Init-UART5-false-LL-true,7-MX_USART1_UART_Init-USART1-false-LL-true,8-MX_USART2_UART_Init-USART2-false-LL-true,9-MX_USART3_UART_Init-USART3-false-LL-true,10-MX_USART6_UART_Init-USART6-false-LL-true,11-MX_CRC_Init-CRC-false-LL-true -RCC.48MHZClocksFreq_Value=84000000 +ProjectManager.functionlistsort=1-MX_GPIO_Init-GPIO-false-LL-true,2-MX_DMA_Init-DMA-false-LL-true,3-SystemClock_Config-RCC-false-HAL-false,4-MX_UART4_Init-UART4-false-LL-true,5-MX_USART1_UART_Init-USART1-false-LL-true,6-MX_USART2_UART_Init-USART2-false-LL-true,7-MX_USART3_UART_Init-USART3-false-LL-true,8-MX_USART6_UART_Init-USART6-false-LL-true,9-MX_CRC_Init-CRC-false-LL-true,10-MX_FSMC_Init-FSMC-true-HAL-true,11-MX_SDIO_SD_Init-SDIO-true-HAL-true,12-MX_SPI1_Init-SPI1-true-LL-true,13-MX_SPI2_Init-SPI2-true-LL-true,14-MX_USB_OTG_FS_PCD_Init-USB_OTG_FS-true-HAL-true,15-MX_FATFS_Init-FATFS-true-HAL-true +RCC.48MHZClocksFreq_Value=48000000 RCC.AHBFreq_Value=168000000 RCC.APB1CLKDivider=RCC_HCLK_DIV4 RCC.APB1Freq_Value=42000000 @@ -372,14 +503,14 @@ RCC.HCLKFreq_Value=168000000 RCC.HSE_VALUE=8000000 RCC.HSI_VALUE=16000000 RCC.I2SClocksFreq_Value=192000000 -RCC.IPParameters=48MHZClocksFreq_Value,AHBFreq_Value,APB1CLKDivider,APB1Freq_Value,APB1TimFreq_Value,APB2CLKDivider,APB2Freq_Value,APB2TimFreq_Value,CortexFreq_Value,EthernetFreq_Value,FCLKCortexFreq_Value,FLatency,FamilyName,HCLKFreq_Value,HSE_VALUE,HSI_VALUE,I2SClocksFreq_Value,LSI_VALUE,MCO2PinFreq_Value,PLLCLKFreq_Value,PLLM,PLLN,PLLQCLKFreq_Value,PLLSourceVirtual,RTCFreq_Value,RTCHSEDivFreq_Value,SYSCLKFreq_VALUE,SYSCLKSource,VCOI2SOutputFreq_Value,VCOInputFreq_Value,VCOOutputFreq_Value,VcooutputI2S +RCC.IPParameters=48MHZClocksFreq_Value,AHBFreq_Value,APB1CLKDivider,APB1Freq_Value,APB1TimFreq_Value,APB2CLKDivider,APB2Freq_Value,APB2TimFreq_Value,CortexFreq_Value,EthernetFreq_Value,FCLKCortexFreq_Value,FLatency,FamilyName,HCLKFreq_Value,HSE_VALUE,HSI_VALUE,I2SClocksFreq_Value,LSI_VALUE,MCO2PinFreq_Value,PLLCLKFreq_Value,PLLM,PLLN,PLLQ,PLLQCLKFreq_Value,RTCFreq_Value,RTCHSEDivFreq_Value,SYSCLKFreq_VALUE,SYSCLKSource,VCOI2SOutputFreq_Value,VCOInputFreq_Value,VCOOutputFreq_Value,VcooutputI2S RCC.LSI_VALUE=32000 RCC.MCO2PinFreq_Value=168000000 RCC.PLLCLKFreq_Value=168000000 RCC.PLLM=4 RCC.PLLN=168 -RCC.PLLQCLKFreq_Value=84000000 -RCC.PLLSourceVirtual=RCC_PLLSOURCE_HSE +RCC.PLLQ=7 +RCC.PLLQCLKFreq_Value=48000000 RCC.RTCFreq_Value=32000 RCC.RTCHSEDivFreq_Value=4000000 RCC.SYSCLKFreq_VALUE=168000000 @@ -388,35 +519,18 @@ RCC.VCOI2SOutputFreq_Value=384000000 RCC.VCOInputFreq_Value=2000000 RCC.VCOOutputFreq_Value=336000000 RCC.VcooutputI2S=192000000 -SPI1.BaudRatePrescaler=SPI_BAUDRATEPRESCALER_2 -SPI1.CLKPhase=SPI_PHASE_1EDGE -SPI1.CLKPolarity=SPI_POLARITY_LOW -SPI1.CRCCalculation=SPI_CRCCALCULATION_DISABLE SPI1.CalculateBaudRate=42.0 MBits/s -SPI1.DataSize=SPI_DATASIZE_8BIT SPI1.Direction=SPI_DIRECTION_2LINES -SPI1.FirstBit=SPI_FIRSTBIT_MSB -SPI1.IPParameters=TIMode,DataSize,FirstBit,BaudRatePrescaler,CLKPolarity,CLKPhase,CRCCalculation,NSS,VirtualType,Mode,Direction,CalculateBaudRate +SPI1.IPParameters=VirtualType,Mode,Direction,CalculateBaudRate SPI1.Mode=SPI_MODE_MASTER -SPI1.NSS=SPI_NSS_SOFT -SPI1.TIMode=SPI_TIMODE_DISABLE SPI1.VirtualType=VM_MASTER -UART4.BaudRate=115200 -UART4.IPParameters=BaudRate,WordLength,Parity,StopBits,Mode,OverSampling,VirtualMode -UART4.Mode=MODE_TX_RX -UART4.OverSampling=UART_OVERSAMPLING_16 -UART4.Parity=PARITY_NONE -UART4.StopBits=UART_STOPBITS_1 +SPI2.CalculateBaudRate=21.0 MBits/s +SPI2.Direction=SPI_DIRECTION_2LINES +SPI2.IPParameters=VirtualType,Mode,Direction,CalculateBaudRate +SPI2.Mode=SPI_MODE_MASTER +SPI2.VirtualType=VM_MASTER +UART4.IPParameters=VirtualMode UART4.VirtualMode=Asynchronous -UART4.WordLength=WORDLENGTH_8B -UART5.BaudRate=5250000 -UART5.IPParameters=BaudRate,WordLength,Parity,StopBits,Mode,OverSampling,VirtualMode -UART5.Mode=MODE_TX_RX -UART5.OverSampling=UART_OVERSAMPLING_8 -UART5.Parity=PARITY_NONE -UART5.StopBits=UART_STOPBITS_1 -UART5.VirtualMode=Asynchronous -UART5.WordLength=WORDLENGTH_8B USART1.BaudRate=5250000 USART1.IPParameters=BaudRate,WordLength,Parity,StopBits,Mode,OverSampling,VirtualMode USART1.Mode=MODE_TX_RX @@ -449,8 +563,12 @@ USART6.Parity=PARITY_NONE USART6.StopBits=STOPBITS_1 USART6.VirtualMode=VM_ASYNC USART6.WordLength=WORDLENGTH_8B +USB_OTG_FS.IPParameters=VirtualMode +USB_OTG_FS.VirtualMode=Device_Only VP_CRC_VS_CRC.Mode=CRC_Activate VP_CRC_VS_CRC.Signal=CRC_VS_CRC +VP_FATFS_VS_SDIO.Mode=SDIO +VP_FATFS_VS_SDIO.Signal=FATFS_VS_SDIO VP_SYS_VS_Systick.Mode=SysTick VP_SYS_VS_Systick.Signal=SYS_VS_Systick board=custom diff --git a/lib/console_handler.c b/lib/console_handler.c index 29f5f7a..8dc2e97 100644 --- a/lib/console_handler.c +++ b/lib/console_handler.c @@ -9,19 +9,31 @@ #include "usart_handler.h" #include "strutil.h" +#ifndef DIAG_INTERRUPT_IN +# define DIAG_INTERRUPT_IN() +#endif + +#ifndef DIAG_INTERRUPT_OUT +# define DIAG_INTERRUPT_OUT() +#endif + void HandleConsoleUsartTxDmaIrq(DMAINFO *info, USART_TypeDef *usart) // debug usart { + DIAG_INTERRUPT_IN(); if(*info->isReg & info->tcMask) { // DMA transfer complete *info->ifcReg = info->tcMask; LL_USART_EnableIT_TC(usart); LL_DMA_DisableStream(info->dma, info->stream); } + DIAG_INTERRUPT_OUT(); } void HandleConsoleUsartIrq(USART_TypeDef *usart) { + DIAG_INTERRUPT_IN(); if(LL_USART_IsActiveFlag_TC(usart) && LL_USART_IsEnabledIT_TC(usart)) // transmission complete LL_USART_DisableIT_TC(usart); + DIAG_INTERRUPT_OUT(); } #define ADDINFO(b,s,u) \ diff --git a/lib/crc_handler.c b/lib/crc_handler.c index 4f8a115..e27dc53 100644 --- a/lib/crc_handler.c +++ b/lib/crc_handler.c @@ -19,6 +19,15 @@ # define DIAG_CRC_CALC_END() #endif +#ifndef DIAG_INTERRUPT_IN +# define DIAG_INTERRUPT_IN() +#endif + +#ifndef DIAG_INTERRUPT_OUT +# define DIAG_INTERRUPT_OUT() +#endif + + void InitCrcStatus(struct crcstatus_t *st, DMA_TypeDef *dma, uint32_t stream) { InitDmaInfo(&st->dmaInfo, dma, stream); @@ -90,6 +99,7 @@ void StartNextCrcTask(struct crcstatus_t *status) void HandleCrcDmaIrq(struct crcstatus_t *status) { + DIAG_INTERRUPT_IN(); if(*status->dmaInfo.isReg & status->dmaInfo.tcMask) { // DMA transfer complete *status->dmaInfo.ifcReg = status->dmaInfo.tcMask; LL_DMA_DisableStream(status->dmaInfo.dma, status->dmaInfo.stream); @@ -118,5 +128,6 @@ void HandleCrcDmaIrq(struct crcstatus_t *status) StartNextCrcTask(status); } } + DIAG_INTERRUPT_OUT(); } diff --git a/lib/fault.c b/lib/fault.c index 880c4a0..25952ab 100644 --- a/lib/fault.c +++ b/lib/fault.c @@ -9,82 +9,81 @@ //#include #include "stm32f4xx.h" #include "strutil.h" - -#define HARD_FAULT 1 -#define MEMMANAGE_FAULT 2 -#define BUS_FAULT 3 -#define USAGE_FAULT 4 - +#include "fault.h" typedef struct { - uint32_t R0; - uint32_t R1; - uint32_t R2; - uint32_t R3; - uint32_t R4; - uint32_t R5; - uint32_t R6; - uint32_t R7; - uint32_t R8; - uint32_t R9; - uint32_t R10; - uint32_t R11; - uint32_t R12; - uint32_t SP; - uint32_t LR; - uint32_t PC; - uint32_t xPSR; - uint32_t PSP; - uint32_t MSP; - uint32_t EXC_RETURN; - uint32_t CONTROL; + uint32_t R0; + uint32_t R1; + uint32_t R2; + uint32_t R3; + uint32_t R4; + uint32_t R5; + uint32_t R6; + uint32_t R7; + uint32_t R8; + uint32_t R9; + uint32_t R10; + uint32_t R11; + uint32_t R12; + uint32_t SP; + uint32_t LR; + uint32_t PC; + uint32_t xPSR; + uint32_t PSP; + uint32_t MSP; + uint32_t EXC_RETURN; + uint32_t CONTROL; } fault_context_t; fault_context_t g_faultContext; +void __attribute__((weak)) app_fault_callback(uint32_t reason) +{ +} + void SwoSendStr(char const *str, uint8_t len, uint8_t port) { while(len) { - if (((ITM->TCR & ITM_TCR_ITMENA_Msk) != 0UL) && // ITM enabled - ((ITM->TER & (1UL << port) ) != 0UL) ) // ITM Port enabled - { - // Wait until shift register is free - while (ITM->PORT[port].u32 == 0UL) { - __ASM volatile ("nop"); - } - if(len >= 4) { - ITM->PORT[port].u32 = *(uint32_t*)(str); - str += 4; - len -= 4; - } else if(len >= 2) { - ITM->PORT[port].u16 = *(uint16_t*)(str); - str += 2; - len -= 2; - } else { + if (((ITM->TCR & ITM_TCR_ITMENA_Msk) != 0UL) && // ITM enabled + ((ITM->TER & (1UL << port) ) != 0UL) ) // ITM Port enabled + { + // Wait until shift register is free + while (ITM->PORT[port].u32 == 0UL) { + __ASM volatile ("nop"); + } + if(len >= 4) { + ITM->PORT[port].u32 = *(uint32_t*)(str); + str += 4; + len -= 4; + } else if(len >= 2) { + ITM->PORT[port].u16 = *(uint16_t*)(str); + str += 2; + len -= 2; + } else { ITM->PORT[port].u8 = *(uint8_t*)(str); ++str; --len; - } - } else - break; + } + } else + break; } } void fault_print_str(char *fmtstr, uint32_t *values) { - char hex_str[9]={0}; - char *nextChunk = fmtstr; + char hex_str[9]={0}; + char *nextChunk = fmtstr; - while(*fmtstr) { - if(*fmtstr == '%') { - SwoSendStr(nextChunk, fmtstr-nextChunk, 0); - uitohex(hex_str, *values++, 8); - SwoSendStr(hex_str, 8, 0); - nextChunk = fmtstr +1; - } - ++fmtstr; - } - if(nextChunk != fmtstr) + while(*fmtstr) { + if(*fmtstr == '%') { + SwoSendStr(nextChunk, fmtstr-nextChunk, 0); + uitohex(hex_str, *values++, 8); + SwoSendStr(hex_str, 8, 0); + nextChunk = fmtstr +1; + } + ++fmtstr; + } + if(nextChunk != fmtstr) SwoSendStr(nextChunk, fmtstr-nextChunk, 0); } @@ -92,31 +91,31 @@ void fault_print_str(char *fmtstr, uint32_t *values) __attribute__((noreturn)) void FaultHandler(uint32_t type, fault_context_t *context) { - uint32_t FSR[9] = { - SCB->HFSR, - 0xff & SCB->CFSR, - (0xff00 & SCB->CFSR) >> 8, - (0xffff0000 & SCB->CFSR) >> 16, - SCB->DFSR, - SCB->AFSR, - SCB->SHCSR, - SCB->MMFAR, - SCB->BFAR - }; + uint32_t FSR[9] = { + SCB->HFSR, + 0xff & SCB->CFSR, + (0xff00 & SCB->CFSR) >> 8, + (0xffff0000 & SCB->CFSR) >> 16, + SCB->DFSR, + SCB->AFSR, + SCB->SHCSR, + SCB->MMFAR, + SCB->BFAR + }; while(1) { fault_print_str("\n++ Fault Handler ++\n\nFaultType: ",NULL); switch( type ) { - case HARD_FAULT: + case FAULT_REASON_HARD_FAULT: fault_print_str("HardFault",NULL); break; - case MEMMANAGE_FAULT: + case FAULT_REASON_MEMMANAGE_FAULT: fault_print_str("MemManageFault",NULL); break; - case BUS_FAULT: + case FAULT_REASON_BUS_FAULT: fault_print_str("BusFault",NULL); break; - case USAGE_FAULT: + case FAULT_REASON_USAGE_FAULT: fault_print_str("UsageFault",NULL); break; default: @@ -126,36 +125,42 @@ __attribute__((noreturn)) void FaultHandler(uint32_t type, fault_context_t *cont fault_print_str("\n\nContext:",NULL); - fault_print_str( "\nR0 : %" - "\nR1 : %" - "\nR2 : %" - "\nR3 : %" - "\nR4 : %" - "\nR5 : %" - "\nR6 : %" - "\nR7 : %" - "\nR8 : %" - "\nR9 : %" - "\nR10 : %" - "\nR11 : %" - "\nR12 : %" - "\nSP : %" - "\nLR : %" - "\nPC : %" - "\nxPSR : %" - "\nPSP : %" - "\nMSP : %", (uint32_t *)context); + fault_print_str( + "\nR0 : %" + "\nR1 : %" + "\nR2 : %" + "\nR3 : %" + "\nR4 : %" + "\nR5 : %" + "\nR6 : %" + "\nR7 : %" + "\nR8 : %" + "\nR9 : %" + "\nR10 : %" + "\nR11 : %" + "\nR12 : %" + "\nSP : %" + "\nLR : %" + "\nPC : %" + "\nxPSR : %" + "\nPSP : %" + "\nMSP : %", + (uint32_t *)context); //Capture CPUID to get core/cpu info fault_print_str("\nCPUID: %",(uint32_t *)&SCB->CPUID); - fault_print_str("\nHFSR : %" - "\nMMFSR: %" - "\nBFSR : %" - "\nUFSR : %" - "\nDFSR : %" - "\nAFSR : %" - "\nSHCSR: %",FSR); + fault_print_str( + "\nHFSR : %" + "\nMMFSR: %" + "\nBFSR : %" + "\nUFSR : %" + "\nDFSR : %" + "\nAFSR : %" + "\nSHCSR: %", + FSR); + + app_fault_callback(type); } } diff --git a/lib/fault.h b/lib/fault.h new file mode 100644 index 0000000..42b4a44 --- /dev/null +++ b/lib/fault.h @@ -0,0 +1,11 @@ +#ifndef __FAULT_H +#define __FAULT_H + +#define FAULT_REASON_HARD_FAULT 1 +#define FAULT_REASON_MEMMANAGE_FAULT 2 +#define FAULT_REASON_BUS_FAULT 3 +#define FAULT_REASON_USAGE_FAULT 4 + +void app_fault_callback(uint32_t reason); + +#endif /* __FAULT_H */ \ No newline at end of file diff --git a/lib/memcpy_dma.c b/lib/memcpy_dma.c index 35770f8..8a28880 100644 --- a/lib/memcpy_dma.c +++ b/lib/memcpy_dma.c @@ -7,6 +7,14 @@ #include "memcpy_dma.h" #include "dma_helper.h" +#ifndef DIAG_INTERRUPT_IN +# define DIAG_INTERRUPT_IN() +#endif + +#ifndef DIAG_INTERRUPT_OUT +# define DIAG_INTERRUPT_OUT() +#endif + volatile uint8_t g_memcpyDmaBusy = 0; static DMAINFO g_memcpyDmaInfo; @@ -31,9 +39,11 @@ void * MemcpyDma(void *dst, void const *src, size_t length) void HandleMemcpyDmaIrq() { + DIAG_INTERRUPT_IN(); if(*g_memcpyDmaInfo.isReg & g_memcpyDmaInfo.tcMask) { // DMA transfer complete *g_memcpyDmaInfo.ifcReg = g_memcpyDmaInfo.tcMask; LL_DMA_DisableStream(g_memcpyDmaInfo.dma, g_memcpyDmaInfo.stream); g_memcpyDmaBusy = 0; } + DIAG_INTERRUPT_OUT(); } diff --git a/lib/usart_handler.c b/lib/usart_handler.c index ea27003..e71feb1 100644 --- a/lib/usart_handler.c +++ b/lib/usart_handler.c @@ -16,6 +16,12 @@ #ifndef DIAG_RX_BUFFER_SWITCH # define DIAG_RX_BUFFER_SWITCH(x) #endif +#ifndef DIAG_INTERRUPT_IN +# define DIAG_INTERRUPT_IN() +#endif +#ifndef DIAG_INTERRUPT_OUT +# define DIAG_INTERRUPT_OUT() +#endif void InitUartStatus( @@ -140,6 +146,7 @@ void RxCrcComputedCallback(void *callbackParm, uint32_t calculatedCrc, uint8_t s void HandleUsartRxDmaIrq(UARTSTATUS *status) { + DIAG_INTERRUPT_IN(); StatsIncRcvd(&status->stats); if(*status->rxDmaInfo.isReg & status->rxDmaInfo.tcMask) { *status->rxDmaInfo.ifcReg = status->rxDmaInfo.tcMask; @@ -163,10 +170,12 @@ void HandleUsartRxDmaIrq(UARTSTATUS *status) if(status->rxBuffers[status->activeRxBuf].busy) StatsIncOverrun(&status->stats); SetupReceive(status); + DIAG_INTERRUPT_OUT(); } void HandleUsartTxDmaIrq(UARTSTATUS *status) { + DIAG_INTERRUPT_IN(); if(*status->txDmaInfo.isReg & status->txDmaInfo.tcMask) { // DMA transfer complete *status->txDmaInfo.ifcReg = status->txDmaInfo.tcMask; LL_USART_EnableIT_TC(status->uart); @@ -183,11 +192,12 @@ void HandleUsartTxDmaIrq(UARTSTATUS *status) *status->txDmaInfo.ifcReg = status->txDmaInfo.htMask; if(*status->txDmaInfo.isReg & status->txDmaInfo.dmeMask) *status->txDmaInfo.ifcReg = status->txDmaInfo.dmeMask; - + DIAG_INTERRUPT_OUT(); } void HandleUsartIrq(UARTSTATUS *status) { + DIAG_INTERRUPT_IN(); if(LL_USART_IsActiveFlag_IDLE(status->uart) && LL_USART_IsEnabledIT_IDLE(status->uart)) { // receiver idle LL_USART_ClearFlag_IDLE(status->uart); uint16_t rcvdLen = status->rxBuffers[status->activeRxBuf].requestedLength - LL_DMA_GetDataLength(status->rxDmaInfo.dma, status->rxDmaInfo.stream); @@ -210,5 +220,6 @@ void HandleUsartIrq(UARTSTATUS *status) LL_USART_EnableDirectionTx(status->uart); status->txBuffer.busy = 0; } + DIAG_INTERRUPT_OUT(); } diff --git a/lib/usart_handler.h b/lib/usart_handler.h index eb1ed72..e62e2c0 100644 --- a/lib/usart_handler.h +++ b/lib/usart_handler.h @@ -60,7 +60,7 @@ typedef struct { UARTBUFFER rxBuffers[2]; } UARTSTATUS; -#define STARTMARKER 0xa5 +#define STARTMARKER 0x95 void InitUartStatus( UARTSTATUS *st, USART_TypeDef *uart, DMA_TypeDef *dma,