From 7672e157a097a3a8434493f183c59d0e1f36b42e Mon Sep 17 00:00:00 2001 From: Attila BODY Date: Sun, 6 Dec 2020 00:29:45 +0100 Subject: [PATCH] f1ll introduction --- .cproject | 35 +- .mxproject | 8 +- .../Inc/stm32f1xx_ll_usart.h | 2569 +++++++++++++++++ .../Src/stm32f1xx_ll_usart.c | 446 +++ Inc/dma.h | 18 +- Inc/gpio.h | 24 +- Inc/main.h | 2 + Inc/spi.h | 22 +- Inc/usart.h | 50 + NeoPixelF103MVP.ioc | 37 +- Src/dma.c | 14 +- Src/gpio.c | 19 +- Src/main.c | 6 + Src/spi.c | 6 +- Src/usart.c | 70 + components/f1ll/consolehandler.cpp | 42 + components/f1ll/consolehandler.h | 45 + components/f1ll/dmahelper.cpp | 30 + components/f1ll/dmahelper.h | 49 + components/f1ll/singleton.h | 26 + components/f1ll/strutil.cpp | 110 + components/f1ll/strutil.h | 31 + components/f1ll/usartcore.cpp | 120 + components/f1ll/usartcore.h | 55 + platform/crc_ll.h | 6 + platform/dma_ll.h | 6 + platform/usart_ll.h | 6 + 27 files changed, 3761 insertions(+), 91 deletions(-) create mode 100644 Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_usart.h create mode 100644 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_usart.c create mode 100644 Inc/usart.h create mode 100644 Src/usart.c create mode 100644 components/f1ll/consolehandler.cpp create mode 100644 components/f1ll/consolehandler.h create mode 100644 components/f1ll/dmahelper.cpp create mode 100644 components/f1ll/dmahelper.h create mode 100644 components/f1ll/singleton.h create mode 100644 components/f1ll/strutil.cpp create mode 100644 components/f1ll/strutil.h create mode 100644 components/f1ll/usartcore.cpp create mode 100644 components/f1ll/usartcore.h create mode 100644 platform/crc_ll.h create mode 100644 platform/dma_ll.h create mode 100644 platform/usart_ll.h diff --git a/.cproject b/.cproject index d69df2b..5fd92a5 100644 --- a/.cproject +++ b/.cproject @@ -17,13 +17,13 @@ - @@ -140,13 +141,13 @@ - @@ -194,7 +194,7 @@ - + diff --git a/.mxproject b/.mxproject index 6e07dcc..0fc21e2 100644 --- a/.mxproject +++ b/.mxproject @@ -1,14 +1,14 @@ [PreviousLibFiles] -LibFiles=Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_gpio.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_dma.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_bus.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_cortex.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_rcc.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_system.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_utils.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_exti.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_pwr.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_spi.h;Middlewares/Third_Party/FreeRTOS/Source/include/croutine.h;Middlewares/Third_Party/FreeRTOS/Source/include/deprecated_definitions.h;Middlewares/Third_Party/FreeRTOS/Source/include/event_groups.h;Middlewares/Third_Party/FreeRTOS/Source/include/FreeRTOS.h;Middlewares/Third_Party/FreeRTOS/Source/include/list.h;Middlewares/Third_Party/FreeRTOS/Source/include/message_buffer.h;Middlewares/Third_Party/FreeRTOS/Source/include/mpu_prototypes.h;Middlewares/Third_Party/FreeRTOS/Source/include/mpu_wrappers.h;Middlewares/Third_Party/FreeRTOS/Source/include/portable.h;Middlewares/Third_Party/FreeRTOS/Source/include/projdefs.h;Middlewares/Third_Party/FreeRTOS/Source/include/queue.h;Middlewares/Third_Party/FreeRTOS/Source/include/semphr.h;Middlewares/Third_Party/FreeRTOS/Source/include/stack_macros.h;Middlewares/Third_Party/FreeRTOS/Source/include/StackMacros.h;Middlewares/Third_Party/FreeRTOS/Source/include/stream_buffer.h;Middlewares/Third_Party/FreeRTOS/Source/include/task.h;Middlewares/Third_Party/FreeRTOS/Source/include/timers.h;Middlewares/Third_Party/FreeRTOS/Source/CMSIS_RTOS/cmsis_os.h;Middlewares/Third_Party/FreeRTOS/Source/portable/GCC/ARM_CM3/portmacro.h;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_gpio.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_dma.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_rcc.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_utils.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_exti.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_spi.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_pwr.c;Middlewares/Third_Party/FreeRTOS/Source/croutine.c;Middlewares/Third_Party/FreeRTOS/Source/event_groups.c;Middlewares/Third_Party/FreeRTOS/Source/list.c;Middlewares/Third_Party/FreeRTOS/Source/queue.c;Middlewares/Third_Party/FreeRTOS/Source/stream_buffer.c;Middlewares/Third_Party/FreeRTOS/Source/tasks.c;Middlewares/Third_Party/FreeRTOS/Source/timers.c;Middlewares/Third_Party/FreeRTOS/Source/CMSIS_RTOS/cmsis_os.c;Middlewares/Third_Party/FreeRTOS/Source/portable/MemMang/heap_4.c;Middlewares/Third_Party/FreeRTOS/Source/portable/GCC/ARM_CM3/port.c;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_gpio.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_dma.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_bus.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_cortex.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_rcc.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_system.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_utils.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_exti.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_pwr.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_spi.h;Middlewares/Third_Party/FreeRTOS/Source/include/croutine.h;Middlewares/Third_Party/FreeRTOS/Source/include/deprecated_definitions.h;Middlewares/Third_Party/FreeRTOS/Source/include/event_groups.h;Middlewares/Third_Party/FreeRTOS/Source/include/FreeRTOS.h;Middlewares/Third_Party/FreeRTOS/Source/include/list.h;Middlewares/Third_Party/FreeRTOS/Source/include/message_buffer.h;Middlewares/Third_Party/FreeRTOS/Source/include/mpu_prototypes.h;Middlewares/Third_Party/FreeRTOS/Source/include/mpu_wrappers.h;Middlewares/Third_Party/FreeRTOS/Source/include/portable.h;Middlewares/Third_Party/FreeRTOS/Source/include/projdefs.h;Middlewares/Third_Party/FreeRTOS/Source/include/queue.h;Middlewares/Third_Party/FreeRTOS/Source/include/semphr.h;Middlewares/Third_Party/FreeRTOS/Source/include/stack_macros.h;Middlewares/Third_Party/FreeRTOS/Source/include/StackMacros.h;Middlewares/Third_Party/FreeRTOS/Source/include/stream_buffer.h;Middlewares/Third_Party/FreeRTOS/Source/include/task.h;Middlewares/Third_Party/FreeRTOS/Source/include/timers.h;Middlewares/Third_Party/FreeRTOS/Source/CMSIS_RTOS/cmsis_os.h;Middlewares/Third_Party/FreeRTOS/Source/portable/GCC/ARM_CM3/portmacro.h;Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f103xb.h;Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f1xx.h;Drivers/CMSIS/Device/ST/STM32F1xx/Include/system_stm32f1xx.h;Drivers/CMSIS/Device/ST/STM32F1xx/Source/Templates/system_stm32f1xx.c;Drivers/CMSIS/Include/cmsis_armcc.h;Drivers/CMSIS/Include/cmsis_armclang.h;Drivers/CMSIS/Include/cmsis_compiler.h;Drivers/CMSIS/Include/cmsis_gcc.h;Drivers/CMSIS/Include/cmsis_iccarm.h;Drivers/CMSIS/Include/cmsis_version.h;Drivers/CMSIS/Include/core_armv8mbl.h;Drivers/CMSIS/Include/core_armv8mml.h;Drivers/CMSIS/Include/core_cm0.h;Drivers/CMSIS/Include/core_cm0plus.h;Drivers/CMSIS/Include/core_cm1.h;Drivers/CMSIS/Include/core_cm23.h;Drivers/CMSIS/Include/core_cm3.h;Drivers/CMSIS/Include/core_cm33.h;Drivers/CMSIS/Include/core_cm4.h;Drivers/CMSIS/Include/core_cm7.h;Drivers/CMSIS/Include/core_sc000.h;Drivers/CMSIS/Include/core_sc300.h;Drivers/CMSIS/Include/mpu_armv7.h;Drivers/CMSIS/Include/mpu_armv8.h;Drivers/CMSIS/Include/tz_context.h; +LibFiles=Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_gpio.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_dma.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_bus.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_cortex.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_rcc.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_system.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_utils.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_exti.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_pwr.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_spi.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_usart.h;Middlewares/Third_Party/FreeRTOS/Source/include/croutine.h;Middlewares/Third_Party/FreeRTOS/Source/include/deprecated_definitions.h;Middlewares/Third_Party/FreeRTOS/Source/include/event_groups.h;Middlewares/Third_Party/FreeRTOS/Source/include/FreeRTOS.h;Middlewares/Third_Party/FreeRTOS/Source/include/list.h;Middlewares/Third_Party/FreeRTOS/Source/include/message_buffer.h;Middlewares/Third_Party/FreeRTOS/Source/include/mpu_prototypes.h;Middlewares/Third_Party/FreeRTOS/Source/include/mpu_wrappers.h;Middlewares/Third_Party/FreeRTOS/Source/include/portable.h;Middlewares/Third_Party/FreeRTOS/Source/include/projdefs.h;Middlewares/Third_Party/FreeRTOS/Source/include/queue.h;Middlewares/Third_Party/FreeRTOS/Source/include/semphr.h;Middlewares/Third_Party/FreeRTOS/Source/include/stack_macros.h;Middlewares/Third_Party/FreeRTOS/Source/include/StackMacros.h;Middlewares/Third_Party/FreeRTOS/Source/include/stream_buffer.h;Middlewares/Third_Party/FreeRTOS/Source/include/task.h;Middlewares/Third_Party/FreeRTOS/Source/include/timers.h;Middlewares/Third_Party/FreeRTOS/Source/CMSIS_RTOS/cmsis_os.h;Middlewares/Third_Party/FreeRTOS/Source/portable/GCC/ARM_CM3/portmacro.h;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_gpio.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_dma.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_rcc.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_utils.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_exti.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_spi.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_pwr.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_usart.c;Middlewares/Third_Party/FreeRTOS/Source/croutine.c;Middlewares/Third_Party/FreeRTOS/Source/event_groups.c;Middlewares/Third_Party/FreeRTOS/Source/list.c;Middlewares/Third_Party/FreeRTOS/Source/queue.c;Middlewares/Third_Party/FreeRTOS/Source/stream_buffer.c;Middlewares/Third_Party/FreeRTOS/Source/tasks.c;Middlewares/Third_Party/FreeRTOS/Source/timers.c;Middlewares/Third_Party/FreeRTOS/Source/CMSIS_RTOS/cmsis_os.c;Middlewares/Third_Party/FreeRTOS/Source/portable/MemMang/heap_4.c;Middlewares/Third_Party/FreeRTOS/Source/portable/GCC/ARM_CM3/port.c;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_gpio.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_dma.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_bus.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_cortex.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_rcc.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_system.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_utils.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_exti.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_pwr.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_spi.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_usart.h;Middlewares/Third_Party/FreeRTOS/Source/include/croutine.h;Middlewares/Third_Party/FreeRTOS/Source/include/deprecated_definitions.h;Middlewares/Third_Party/FreeRTOS/Source/include/event_groups.h;Middlewares/Third_Party/FreeRTOS/Source/include/FreeRTOS.h;Middlewares/Third_Party/FreeRTOS/Source/include/list.h;Middlewares/Third_Party/FreeRTOS/Source/include/message_buffer.h;Middlewares/Third_Party/FreeRTOS/Source/include/mpu_prototypes.h;Middlewares/Third_Party/FreeRTOS/Source/include/mpu_wrappers.h;Middlewares/Third_Party/FreeRTOS/Source/include/portable.h;Middlewares/Third_Party/FreeRTOS/Source/include/projdefs.h;Middlewares/Third_Party/FreeRTOS/Source/include/queue.h;Middlewares/Third_Party/FreeRTOS/Source/include/semphr.h;Middlewares/Third_Party/FreeRTOS/Source/include/stack_macros.h;Middlewares/Third_Party/FreeRTOS/Source/include/StackMacros.h;Middlewares/Third_Party/FreeRTOS/Source/include/stream_buffer.h;Middlewares/Third_Party/FreeRTOS/Source/include/task.h;Middlewares/Third_Party/FreeRTOS/Source/include/timers.h;Middlewares/Third_Party/FreeRTOS/Source/CMSIS_RTOS/cmsis_os.h;Middlewares/Third_Party/FreeRTOS/Source/portable/GCC/ARM_CM3/portmacro.h;Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f103xb.h;Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f1xx.h;Drivers/CMSIS/Device/ST/STM32F1xx/Include/system_stm32f1xx.h;Drivers/CMSIS/Device/ST/STM32F1xx/Source/Templates/system_stm32f1xx.c;Drivers/CMSIS/Include/cmsis_armcc.h;Drivers/CMSIS/Include/cmsis_armclang.h;Drivers/CMSIS/Include/cmsis_compiler.h;Drivers/CMSIS/Include/cmsis_gcc.h;Drivers/CMSIS/Include/cmsis_iccarm.h;Drivers/CMSIS/Include/cmsis_version.h;Drivers/CMSIS/Include/core_armv8mbl.h;Drivers/CMSIS/Include/core_armv8mml.h;Drivers/CMSIS/Include/core_cm0.h;Drivers/CMSIS/Include/core_cm0plus.h;Drivers/CMSIS/Include/core_cm1.h;Drivers/CMSIS/Include/core_cm23.h;Drivers/CMSIS/Include/core_cm3.h;Drivers/CMSIS/Include/core_cm33.h;Drivers/CMSIS/Include/core_cm4.h;Drivers/CMSIS/Include/core_cm7.h;Drivers/CMSIS/Include/core_sc000.h;Drivers/CMSIS/Include/core_sc300.h;Drivers/CMSIS/Include/mpu_armv7.h;Drivers/CMSIS/Include/mpu_armv8.h;Drivers/CMSIS/Include/tz_context.h; [PreviousUsedCubeIDEFiles] -SourceFiles=Src/main.c;Src/gpio.c;Src/freertos.c;Src/dma.c;Src/spi.c;Src/stm32f1xx_it.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_gpio.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_dma.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_rcc.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_utils.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_exti.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_spi.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_pwr.c;Middlewares/Third_Party/FreeRTOS/Source/croutine.c;Middlewares/Third_Party/FreeRTOS/Source/event_groups.c;Middlewares/Third_Party/FreeRTOS/Source/list.c;Middlewares/Third_Party/FreeRTOS/Source/queue.c;Middlewares/Third_Party/FreeRTOS/Source/stream_buffer.c;Middlewares/Third_Party/FreeRTOS/Source/tasks.c;Middlewares/Third_Party/FreeRTOS/Source/timers.c;Middlewares/Third_Party/FreeRTOS/Source/CMSIS_RTOS/cmsis_os.c;Middlewares/Third_Party/FreeRTOS/Source/portable/MemMang/heap_4.c;Middlewares/Third_Party/FreeRTOS/Source/portable/GCC/ARM_CM3/port.c;Src/system_stm32f1xx.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_gpio.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_dma.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_rcc.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_utils.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_exti.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_spi.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_pwr.c;Middlewares/Third_Party/FreeRTOS/Source/croutine.c;Middlewares/Third_Party/FreeRTOS/Source/event_groups.c;Middlewares/Third_Party/FreeRTOS/Source/list.c;Middlewares/Third_Party/FreeRTOS/Source/queue.c;Middlewares/Third_Party/FreeRTOS/Source/stream_buffer.c;Middlewares/Third_Party/FreeRTOS/Source/tasks.c;Middlewares/Third_Party/FreeRTOS/Source/timers.c;Middlewares/Third_Party/FreeRTOS/Source/CMSIS_RTOS/cmsis_os.c;Middlewares/Third_Party/FreeRTOS/Source/portable/MemMang/heap_4.c;Middlewares/Third_Party/FreeRTOS/Source/portable/GCC/ARM_CM3/port.c;Src/system_stm32f1xx.c;Drivers/CMSIS/Device/ST/STM32F1xx/Source/Templates/system_stm32f1xx.c;;Middlewares/Third_Party/FreeRTOS/Source/croutine.c;Middlewares/Third_Party/FreeRTOS/Source/event_groups.c;Middlewares/Third_Party/FreeRTOS/Source/list.c;Middlewares/Third_Party/FreeRTOS/Source/queue.c;Middlewares/Third_Party/FreeRTOS/Source/stream_buffer.c;Middlewares/Third_Party/FreeRTOS/Source/tasks.c;Middlewares/Third_Party/FreeRTOS/Source/timers.c;Middlewares/Third_Party/FreeRTOS/Source/CMSIS_RTOS/cmsis_os.c;Middlewares/Third_Party/FreeRTOS/Source/portable/MemMang/heap_4.c;Middlewares/Third_Party/FreeRTOS/Source/portable/GCC/ARM_CM3/port.c; +SourceFiles=Src/main.c;Src/gpio.c;Src/freertos.c;Src/dma.c;Src/spi.c;Src/usart.c;Src/stm32f1xx_it.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_gpio.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_dma.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_rcc.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_utils.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_exti.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_spi.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_pwr.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_usart.c;Middlewares/Third_Party/FreeRTOS/Source/croutine.c;Middlewares/Third_Party/FreeRTOS/Source/event_groups.c;Middlewares/Third_Party/FreeRTOS/Source/list.c;Middlewares/Third_Party/FreeRTOS/Source/queue.c;Middlewares/Third_Party/FreeRTOS/Source/stream_buffer.c;Middlewares/Third_Party/FreeRTOS/Source/tasks.c;Middlewares/Third_Party/FreeRTOS/Source/timers.c;Middlewares/Third_Party/FreeRTOS/Source/CMSIS_RTOS/cmsis_os.c;Middlewares/Third_Party/FreeRTOS/Source/portable/MemMang/heap_4.c;Middlewares/Third_Party/FreeRTOS/Source/portable/GCC/ARM_CM3/port.c;Src/system_stm32f1xx.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_gpio.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_dma.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_rcc.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_utils.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_exti.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_spi.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_pwr.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_usart.c;Middlewares/Third_Party/FreeRTOS/Source/croutine.c;Middlewares/Third_Party/FreeRTOS/Source/event_groups.c;Middlewares/Third_Party/FreeRTOS/Source/list.c;Middlewares/Third_Party/FreeRTOS/Source/queue.c;Middlewares/Third_Party/FreeRTOS/Source/stream_buffer.c;Middlewares/Third_Party/FreeRTOS/Source/tasks.c;Middlewares/Third_Party/FreeRTOS/Source/timers.c;Middlewares/Third_Party/FreeRTOS/Source/CMSIS_RTOS/cmsis_os.c;Middlewares/Third_Party/FreeRTOS/Source/portable/MemMang/heap_4.c;Middlewares/Third_Party/FreeRTOS/Source/portable/GCC/ARM_CM3/port.c;Src/system_stm32f1xx.c;Drivers/CMSIS/Device/ST/STM32F1xx/Source/Templates/system_stm32f1xx.c;;Middlewares/Third_Party/FreeRTOS/Source/croutine.c;Middlewares/Third_Party/FreeRTOS/Source/event_groups.c;Middlewares/Third_Party/FreeRTOS/Source/list.c;Middlewares/Third_Party/FreeRTOS/Source/queue.c;Middlewares/Third_Party/FreeRTOS/Source/stream_buffer.c;Middlewares/Third_Party/FreeRTOS/Source/tasks.c;Middlewares/Third_Party/FreeRTOS/Source/timers.c;Middlewares/Third_Party/FreeRTOS/Source/CMSIS_RTOS/cmsis_os.c;Middlewares/Third_Party/FreeRTOS/Source/portable/MemMang/heap_4.c;Middlewares/Third_Party/FreeRTOS/Source/portable/GCC/ARM_CM3/port.c; HeaderPath=Drivers/STM32F1xx_HAL_Driver/Inc;Middlewares/Third_Party/FreeRTOS/Source/include;Middlewares/Third_Party/FreeRTOS/Source/CMSIS_RTOS;Middlewares/Third_Party/FreeRTOS/Source/portable/GCC/ARM_CM3;Drivers/CMSIS/Device/ST/STM32F1xx/Include;Drivers/CMSIS/Include;Inc; CDefines=USE_FULL_LL_DRIVER;HSE_VALUE:8000000;HSE_STARTUP_TIMEOUT:100;LSE_STARTUP_TIMEOUT:5000;LSE_VALUE:32768;HSI_VALUE:8000000;LSI_VALUE:40000;VDD_VALUE:3300;PREFETCH_ENABLE:1;STM32F103xB;USE_FULL_LL_DRIVER;HSE_VALUE:8000000;HSE_STARTUP_TIMEOUT:100;LSE_STARTUP_TIMEOUT:5000;LSE_VALUE:32768;HSI_VALUE:8000000;LSI_VALUE:40000;VDD_VALUE:3300;PREFETCH_ENABLE:1; [PreviousGenFiles] HeaderPath=/mnt/userdata/compi/work/private/stm32/NeoPixelF103MVP/Inc -HeaderFiles=gpio.h;FreeRTOSConfig.h;dma.h;spi.h;stm32f1xx_it.h;stm32_assert.h;main.h; +HeaderFiles=gpio.h;FreeRTOSConfig.h;dma.h;spi.h;usart.h;stm32f1xx_it.h;stm32_assert.h;main.h; SourcePath=/mnt/userdata/compi/work/private/stm32/NeoPixelF103MVP/Src -SourceFiles=gpio.c;freertos.c;dma.c;spi.c;stm32f1xx_it.c;main.c; +SourceFiles=gpio.c;freertos.c;dma.c;spi.c;usart.c;stm32f1xx_it.c;main.c; diff --git a/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_usart.h b/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_usart.h new file mode 100644 index 0000000..a8a4c23 --- /dev/null +++ b/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_usart.h @@ -0,0 +1,2569 @@ +/** + ****************************************************************************** + * @file stm32f1xx_ll_usart.h + * @author MCD Application Team + * @brief Header file of USART LL module. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F1xx_LL_USART_H +#define __STM32F1xx_LL_USART_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f1xx.h" + +/** @addtogroup STM32F1xx_LL_Driver + * @{ + */ + +#if defined (USART1) || defined (USART2) || defined (USART3) || defined (UART4) || defined (UART5) + +/** @defgroup USART_LL USART + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ + +/* Private constants ---------------------------------------------------------*/ +/** @defgroup USART_LL_Private_Constants USART Private Constants + * @{ + */ + +/* Defines used for the bit position in the register and perform offsets*/ +#define USART_POSITION_GTPR_GT USART_GTPR_GT_Pos +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup USART_LL_Private_Macros USART Private Macros + * @{ + */ +/** + * @} + */ +#endif /*USE_FULL_LL_DRIVER*/ + +/* Exported types ------------------------------------------------------------*/ +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup USART_LL_ES_INIT USART Exported Init structures + * @{ + */ + +/** + * @brief LL USART Init Structure definition + */ +typedef struct +{ + uint32_t BaudRate; /*!< This field defines expected Usart communication baud rate. + + This feature can be modified afterwards using unitary function @ref LL_USART_SetBaudRate().*/ + + uint32_t DataWidth; /*!< Specifies the number of data bits transmitted or received in a frame. + This parameter can be a value of @ref USART_LL_EC_DATAWIDTH. + + This feature can be modified afterwards using unitary function @ref LL_USART_SetDataWidth().*/ + + uint32_t StopBits; /*!< Specifies the number of stop bits transmitted. + This parameter can be a value of @ref USART_LL_EC_STOPBITS. + + This feature can be modified afterwards using unitary function @ref LL_USART_SetStopBitsLength().*/ + + uint32_t Parity; /*!< Specifies the parity mode. + This parameter can be a value of @ref USART_LL_EC_PARITY. + + This feature can be modified afterwards using unitary function @ref LL_USART_SetParity().*/ + + uint32_t TransferDirection; /*!< Specifies whether the Receive and/or Transmit mode is enabled or disabled. + This parameter can be a value of @ref USART_LL_EC_DIRECTION. + + This feature can be modified afterwards using unitary function @ref LL_USART_SetTransferDirection().*/ + + uint32_t HardwareFlowControl; /*!< Specifies whether the hardware flow control mode is enabled or disabled. + This parameter can be a value of @ref USART_LL_EC_HWCONTROL. + + This feature can be modified afterwards using unitary function @ref LL_USART_SetHWFlowCtrl().*/ + + uint32_t OverSampling; /*!< Specifies whether USART oversampling mode is 16 or 8. + This parameter can be a value of @ref USART_LL_EC_OVERSAMPLING. + + This feature can be modified afterwards using unitary function @ref LL_USART_SetOverSampling().*/ + +} LL_USART_InitTypeDef; + +/** + * @brief LL USART Clock Init Structure definition + */ +typedef struct +{ + uint32_t ClockOutput; /*!< Specifies whether the USART clock is enabled or disabled. + This parameter can be a value of @ref USART_LL_EC_CLOCK. + + USART HW configuration can be modified afterwards using unitary functions + @ref LL_USART_EnableSCLKOutput() or @ref LL_USART_DisableSCLKOutput(). + For more details, refer to description of this function. */ + + uint32_t ClockPolarity; /*!< Specifies the steady state of the serial clock. + This parameter can be a value of @ref USART_LL_EC_POLARITY. + + USART HW configuration can be modified afterwards using unitary functions @ref LL_USART_SetClockPolarity(). + For more details, refer to description of this function. */ + + uint32_t ClockPhase; /*!< Specifies the clock transition on which the bit capture is made. + This parameter can be a value of @ref USART_LL_EC_PHASE. + + USART HW configuration can be modified afterwards using unitary functions @ref LL_USART_SetClockPhase(). + For more details, refer to description of this function. */ + + uint32_t LastBitClockPulse; /*!< Specifies whether the clock pulse corresponding to the last transmitted + data bit (MSB) has to be output on the SCLK pin in synchronous mode. + This parameter can be a value of @ref USART_LL_EC_LASTCLKPULSE. + + USART HW configuration can be modified afterwards using unitary functions @ref LL_USART_SetLastClkPulseOutput(). + For more details, refer to description of this function. */ + +} LL_USART_ClockInitTypeDef; + +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup USART_LL_Exported_Constants USART Exported Constants + * @{ + */ + +/** @defgroup USART_LL_EC_GET_FLAG Get Flags Defines + * @brief Flags defines which can be used with LL_USART_ReadReg function + * @{ + */ +#define LL_USART_SR_PE USART_SR_PE /*!< Parity error flag */ +#define LL_USART_SR_FE USART_SR_FE /*!< Framing error flag */ +#define LL_USART_SR_NE USART_SR_NE /*!< Noise detected flag */ +#define LL_USART_SR_ORE USART_SR_ORE /*!< Overrun error flag */ +#define LL_USART_SR_IDLE USART_SR_IDLE /*!< Idle line detected flag */ +#define LL_USART_SR_RXNE USART_SR_RXNE /*!< Read data register not empty flag */ +#define LL_USART_SR_TC USART_SR_TC /*!< Transmission complete flag */ +#define LL_USART_SR_TXE USART_SR_TXE /*!< Transmit data register empty flag */ +#define LL_USART_SR_LBD USART_SR_LBD /*!< LIN break detection flag */ +#define LL_USART_SR_CTS USART_SR_CTS /*!< CTS flag */ +/** + * @} + */ + +/** @defgroup USART_LL_EC_IT IT Defines + * @brief IT defines which can be used with LL_USART_ReadReg and LL_USART_WriteReg functions + * @{ + */ +#define LL_USART_CR1_IDLEIE USART_CR1_IDLEIE /*!< IDLE interrupt enable */ +#define LL_USART_CR1_RXNEIE USART_CR1_RXNEIE /*!< Read data register not empty interrupt enable */ +#define LL_USART_CR1_TCIE USART_CR1_TCIE /*!< Transmission complete interrupt enable */ +#define LL_USART_CR1_TXEIE USART_CR1_TXEIE /*!< Transmit data register empty interrupt enable */ +#define LL_USART_CR1_PEIE USART_CR1_PEIE /*!< Parity error */ +#define LL_USART_CR2_LBDIE USART_CR2_LBDIE /*!< LIN break detection interrupt enable */ +#define LL_USART_CR3_EIE USART_CR3_EIE /*!< Error interrupt enable */ +#define LL_USART_CR3_CTSIE USART_CR3_CTSIE /*!< CTS interrupt enable */ +/** + * @} + */ + +/** @defgroup USART_LL_EC_DIRECTION Communication Direction + * @{ + */ +#define LL_USART_DIRECTION_NONE 0x00000000U /*!< Transmitter and Receiver are disabled */ +#define LL_USART_DIRECTION_RX USART_CR1_RE /*!< Transmitter is disabled and Receiver is enabled */ +#define LL_USART_DIRECTION_TX USART_CR1_TE /*!< Transmitter is enabled and Receiver is disabled */ +#define LL_USART_DIRECTION_TX_RX (USART_CR1_TE |USART_CR1_RE) /*!< Transmitter and Receiver are enabled */ +/** + * @} + */ + +/** @defgroup USART_LL_EC_PARITY Parity Control + * @{ + */ +#define LL_USART_PARITY_NONE 0x00000000U /*!< Parity control disabled */ +#define LL_USART_PARITY_EVEN USART_CR1_PCE /*!< Parity control enabled and Even Parity is selected */ +#define LL_USART_PARITY_ODD (USART_CR1_PCE | USART_CR1_PS) /*!< Parity control enabled and Odd Parity is selected */ +/** + * @} + */ + +/** @defgroup USART_LL_EC_WAKEUP Wakeup + * @{ + */ +#define LL_USART_WAKEUP_IDLELINE 0x00000000U /*!< USART wake up from Mute mode on Idle Line */ +#define LL_USART_WAKEUP_ADDRESSMARK USART_CR1_WAKE /*!< USART wake up from Mute mode on Address Mark */ +/** + * @} + */ + +/** @defgroup USART_LL_EC_DATAWIDTH Datawidth + * @{ + */ +#define LL_USART_DATAWIDTH_8B 0x00000000U /*!< 8 bits word length : Start bit, 8 data bits, n stop bits */ +#define LL_USART_DATAWIDTH_9B USART_CR1_M /*!< 9 bits word length : Start bit, 9 data bits, n stop bits */ +/** + * @} + */ + +/** @defgroup USART_LL_EC_OVERSAMPLING Oversampling + * @{ + */ +#define LL_USART_OVERSAMPLING_16 0x00000000U /*!< Oversampling by 16 */ +#if defined(USART_CR1_OVER8) +#define LL_USART_OVERSAMPLING_8 USART_CR1_OVER8 /*!< Oversampling by 8 */ +#endif /* USART_OverSampling_Feature */ +/** + * @} + */ + +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup USART_LL_EC_CLOCK Clock Signal + * @{ + */ + +#define LL_USART_CLOCK_DISABLE 0x00000000U /*!< Clock signal not provided */ +#define LL_USART_CLOCK_ENABLE USART_CR2_CLKEN /*!< Clock signal provided */ +/** + * @} + */ +#endif /*USE_FULL_LL_DRIVER*/ + +/** @defgroup USART_LL_EC_LASTCLKPULSE Last Clock Pulse + * @{ + */ +#define LL_USART_LASTCLKPULSE_NO_OUTPUT 0x00000000U /*!< The clock pulse of the last data bit is not output to the SCLK pin */ +#define LL_USART_LASTCLKPULSE_OUTPUT USART_CR2_LBCL /*!< The clock pulse of the last data bit is output to the SCLK pin */ +/** + * @} + */ + +/** @defgroup USART_LL_EC_PHASE Clock Phase + * @{ + */ +#define LL_USART_PHASE_1EDGE 0x00000000U /*!< The first clock transition is the first data capture edge */ +#define LL_USART_PHASE_2EDGE USART_CR2_CPHA /*!< The second clock transition is the first data capture edge */ +/** + * @} + */ + +/** @defgroup USART_LL_EC_POLARITY Clock Polarity + * @{ + */ +#define LL_USART_POLARITY_LOW 0x00000000U /*!< Steady low value on SCLK pin outside transmission window*/ +#define LL_USART_POLARITY_HIGH USART_CR2_CPOL /*!< Steady high value on SCLK pin outside transmission window */ +/** + * @} + */ + +/** @defgroup USART_LL_EC_STOPBITS Stop Bits + * @{ + */ +#define LL_USART_STOPBITS_0_5 USART_CR2_STOP_0 /*!< 0.5 stop bit */ +#define LL_USART_STOPBITS_1 0x00000000U /*!< 1 stop bit */ +#define LL_USART_STOPBITS_1_5 (USART_CR2_STOP_0 | USART_CR2_STOP_1) /*!< 1.5 stop bits */ +#define LL_USART_STOPBITS_2 USART_CR2_STOP_1 /*!< 2 stop bits */ +/** + * @} + */ + +/** @defgroup USART_LL_EC_HWCONTROL Hardware Control + * @{ + */ +#define LL_USART_HWCONTROL_NONE 0x00000000U /*!< CTS and RTS hardware flow control disabled */ +#define LL_USART_HWCONTROL_RTS USART_CR3_RTSE /*!< RTS output enabled, data is only requested when there is space in the receive buffer */ +#define LL_USART_HWCONTROL_CTS USART_CR3_CTSE /*!< CTS mode enabled, data is only transmitted when the nCTS input is asserted (tied to 0) */ +#define LL_USART_HWCONTROL_RTS_CTS (USART_CR3_RTSE | USART_CR3_CTSE) /*!< CTS and RTS hardware flow control enabled */ +/** + * @} + */ + +/** @defgroup USART_LL_EC_IRDA_POWER IrDA Power + * @{ + */ +#define LL_USART_IRDA_POWER_NORMAL 0x00000000U /*!< IrDA normal power mode */ +#define LL_USART_IRDA_POWER_LOW USART_CR3_IRLP /*!< IrDA low power mode */ +/** + * @} + */ + +/** @defgroup USART_LL_EC_LINBREAK_DETECT LIN Break Detection Length + * @{ + */ +#define LL_USART_LINBREAK_DETECT_10B 0x00000000U /*!< 10-bit break detection method selected */ +#define LL_USART_LINBREAK_DETECT_11B USART_CR2_LBDL /*!< 11-bit break detection method selected */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup USART_LL_Exported_Macros USART Exported Macros + * @{ + */ + +/** @defgroup USART_LL_EM_WRITE_READ Common Write and read registers Macros + * @{ + */ + +/** + * @brief Write a value in USART register + * @param __INSTANCE__ USART Instance + * @param __REG__ Register to be written + * @param __VALUE__ Value to be written in the register + * @retval None + */ +#define LL_USART_WriteReg(__INSTANCE__, __REG__, __VALUE__) WRITE_REG(__INSTANCE__->__REG__, (__VALUE__)) + +/** + * @brief Read a value in USART register + * @param __INSTANCE__ USART Instance + * @param __REG__ Register to be read + * @retval Register value + */ +#define LL_USART_ReadReg(__INSTANCE__, __REG__) READ_REG(__INSTANCE__->__REG__) +/** + * @} + */ + +/** @defgroup USART_LL_EM_Exported_Macros_Helper Exported_Macros_Helper + * @{ + */ + +/** + * @brief Compute USARTDIV value according to Peripheral Clock and + * expected Baud Rate in 8 bits sampling mode (32 bits value of USARTDIV is returned) + * @param __PERIPHCLK__ Peripheral Clock frequency used for USART instance + * @param __BAUDRATE__ Baud rate value to achieve + * @retval USARTDIV value to be used for BRR register filling in OverSampling_8 case + */ +#define __LL_USART_DIV_SAMPLING8_100(__PERIPHCLK__, __BAUDRATE__) (((__PERIPHCLK__)*25)/(2*(__BAUDRATE__))) +#define __LL_USART_DIVMANT_SAMPLING8(__PERIPHCLK__, __BAUDRATE__) (__LL_USART_DIV_SAMPLING8_100((__PERIPHCLK__), (__BAUDRATE__))/100) +#define __LL_USART_DIVFRAQ_SAMPLING8(__PERIPHCLK__, __BAUDRATE__) (((__LL_USART_DIV_SAMPLING8_100((__PERIPHCLK__), (__BAUDRATE__)) - (__LL_USART_DIVMANT_SAMPLING8((__PERIPHCLK__), (__BAUDRATE__)) * 100)) * 8 + 50) / 100) +/* UART BRR = mantissa + overflow + fraction + = (UART DIVMANT << 4) + ((UART DIVFRAQ & 0xF8) << 1) + (UART DIVFRAQ & 0x07) */ +#define __LL_USART_DIV_SAMPLING8(__PERIPHCLK__, __BAUDRATE__) (((__LL_USART_DIVMANT_SAMPLING8((__PERIPHCLK__), (__BAUDRATE__)) << 4) + \ + ((__LL_USART_DIVFRAQ_SAMPLING8((__PERIPHCLK__), (__BAUDRATE__)) & 0xF8) << 1)) + \ + (__LL_USART_DIVFRAQ_SAMPLING8((__PERIPHCLK__), (__BAUDRATE__)) & 0x07)) + +/** + * @brief Compute USARTDIV value according to Peripheral Clock and + * expected Baud Rate in 16 bits sampling mode (32 bits value of USARTDIV is returned) + * @param __PERIPHCLK__ Peripheral Clock frequency used for USART instance + * @param __BAUDRATE__ Baud rate value to achieve + * @retval USARTDIV value to be used for BRR register filling in OverSampling_16 case + */ +#define __LL_USART_DIV_SAMPLING16_100(__PERIPHCLK__, __BAUDRATE__) (((__PERIPHCLK__)*25)/(4*(__BAUDRATE__))) +#define __LL_USART_DIVMANT_SAMPLING16(__PERIPHCLK__, __BAUDRATE__) (__LL_USART_DIV_SAMPLING16_100((__PERIPHCLK__), (__BAUDRATE__))/100) +#define __LL_USART_DIVFRAQ_SAMPLING16(__PERIPHCLK__, __BAUDRATE__) ((((__LL_USART_DIV_SAMPLING16_100((__PERIPHCLK__), (__BAUDRATE__)) - (__LL_USART_DIVMANT_SAMPLING16((__PERIPHCLK__), (__BAUDRATE__)) * 100)) * 16) + 50) / 100) +/* USART BRR = mantissa + overflow + fraction + = (USART DIVMANT << 4) + (USART DIVFRAQ & 0xF0) + (USART DIVFRAQ & 0x0F) */ +#define __LL_USART_DIV_SAMPLING16(__PERIPHCLK__, __BAUDRATE__) (((__LL_USART_DIVMANT_SAMPLING16((__PERIPHCLK__), (__BAUDRATE__)) << 4) + \ + (__LL_USART_DIVFRAQ_SAMPLING16((__PERIPHCLK__), (__BAUDRATE__)) & 0xF0)) + \ + (__LL_USART_DIVFRAQ_SAMPLING16((__PERIPHCLK__), (__BAUDRATE__)) & 0x0F)) + +/** + * @} + */ + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ + +/** @defgroup USART_LL_Exported_Functions USART Exported Functions + * @{ + */ + +/** @defgroup USART_LL_EF_Configuration Configuration functions + * @{ + */ + +/** + * @brief USART Enable + * @rmtoll CR1 UE LL_USART_Enable + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_Enable(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->CR1, USART_CR1_UE); +} + +/** + * @brief USART Disable (all USART prescalers and outputs are disabled) + * @note When USART is disabled, USART prescalers and outputs are stopped immediately, + * and current operations are discarded. The configuration of the USART is kept, but all the status + * flags, in the USARTx_SR are set to their default values. + * @rmtoll CR1 UE LL_USART_Disable + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_Disable(USART_TypeDef *USARTx) +{ + CLEAR_BIT(USARTx->CR1, USART_CR1_UE); +} + +/** + * @brief Indicate if USART is enabled + * @rmtoll CR1 UE LL_USART_IsEnabled + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabled(USART_TypeDef *USARTx) +{ + return (READ_BIT(USARTx->CR1, USART_CR1_UE) == (USART_CR1_UE)); +} + +/** + * @brief Receiver Enable (Receiver is enabled and begins searching for a start bit) + * @rmtoll CR1 RE LL_USART_EnableDirectionRx + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableDirectionRx(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->CR1, USART_CR1_RE); +} + +/** + * @brief Receiver Disable + * @rmtoll CR1 RE LL_USART_DisableDirectionRx + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableDirectionRx(USART_TypeDef *USARTx) +{ + CLEAR_BIT(USARTx->CR1, USART_CR1_RE); +} + +/** + * @brief Transmitter Enable + * @rmtoll CR1 TE LL_USART_EnableDirectionTx + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableDirectionTx(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->CR1, USART_CR1_TE); +} + +/** + * @brief Transmitter Disable + * @rmtoll CR1 TE LL_USART_DisableDirectionTx + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableDirectionTx(USART_TypeDef *USARTx) +{ + CLEAR_BIT(USARTx->CR1, USART_CR1_TE); +} + +/** + * @brief Configure simultaneously enabled/disabled states + * of Transmitter and Receiver + * @rmtoll CR1 RE LL_USART_SetTransferDirection\n + * CR1 TE LL_USART_SetTransferDirection + * @param USARTx USART Instance + * @param TransferDirection This parameter can be one of the following values: + * @arg @ref LL_USART_DIRECTION_NONE + * @arg @ref LL_USART_DIRECTION_RX + * @arg @ref LL_USART_DIRECTION_TX + * @arg @ref LL_USART_DIRECTION_TX_RX + * @retval None + */ +__STATIC_INLINE void LL_USART_SetTransferDirection(USART_TypeDef *USARTx, uint32_t TransferDirection) +{ + MODIFY_REG(USARTx->CR1, USART_CR1_RE | USART_CR1_TE, TransferDirection); +} + +/** + * @brief Return enabled/disabled states of Transmitter and Receiver + * @rmtoll CR1 RE LL_USART_GetTransferDirection\n + * CR1 TE LL_USART_GetTransferDirection + * @param USARTx USART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_USART_DIRECTION_NONE + * @arg @ref LL_USART_DIRECTION_RX + * @arg @ref LL_USART_DIRECTION_TX + * @arg @ref LL_USART_DIRECTION_TX_RX + */ +__STATIC_INLINE uint32_t LL_USART_GetTransferDirection(USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR1, USART_CR1_RE | USART_CR1_TE)); +} + +/** + * @brief Configure Parity (enabled/disabled and parity mode if enabled). + * @note This function selects if hardware parity control (generation and detection) is enabled or disabled. + * When the parity control is enabled (Odd or Even), computed parity bit is inserted at the MSB position + * (9th or 8th bit depending on data width) and parity is checked on the received data. + * @rmtoll CR1 PS LL_USART_SetParity\n + * CR1 PCE LL_USART_SetParity + * @param USARTx USART Instance + * @param Parity This parameter can be one of the following values: + * @arg @ref LL_USART_PARITY_NONE + * @arg @ref LL_USART_PARITY_EVEN + * @arg @ref LL_USART_PARITY_ODD + * @retval None + */ +__STATIC_INLINE void LL_USART_SetParity(USART_TypeDef *USARTx, uint32_t Parity) +{ + MODIFY_REG(USARTx->CR1, USART_CR1_PS | USART_CR1_PCE, Parity); +} + +/** + * @brief Return Parity configuration (enabled/disabled and parity mode if enabled) + * @rmtoll CR1 PS LL_USART_GetParity\n + * CR1 PCE LL_USART_GetParity + * @param USARTx USART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_USART_PARITY_NONE + * @arg @ref LL_USART_PARITY_EVEN + * @arg @ref LL_USART_PARITY_ODD + */ +__STATIC_INLINE uint32_t LL_USART_GetParity(USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR1, USART_CR1_PS | USART_CR1_PCE)); +} + +/** + * @brief Set Receiver Wake Up method from Mute mode. + * @rmtoll CR1 WAKE LL_USART_SetWakeUpMethod + * @param USARTx USART Instance + * @param Method This parameter can be one of the following values: + * @arg @ref LL_USART_WAKEUP_IDLELINE + * @arg @ref LL_USART_WAKEUP_ADDRESSMARK + * @retval None + */ +__STATIC_INLINE void LL_USART_SetWakeUpMethod(USART_TypeDef *USARTx, uint32_t Method) +{ + MODIFY_REG(USARTx->CR1, USART_CR1_WAKE, Method); +} + +/** + * @brief Return Receiver Wake Up method from Mute mode + * @rmtoll CR1 WAKE LL_USART_GetWakeUpMethod + * @param USARTx USART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_USART_WAKEUP_IDLELINE + * @arg @ref LL_USART_WAKEUP_ADDRESSMARK + */ +__STATIC_INLINE uint32_t LL_USART_GetWakeUpMethod(USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR1, USART_CR1_WAKE)); +} + +/** + * @brief Set Word length (i.e. nb of data bits, excluding start and stop bits) + * @rmtoll CR1 M LL_USART_SetDataWidth + * @param USARTx USART Instance + * @param DataWidth This parameter can be one of the following values: + * @arg @ref LL_USART_DATAWIDTH_8B + * @arg @ref LL_USART_DATAWIDTH_9B + * @retval None + */ +__STATIC_INLINE void LL_USART_SetDataWidth(USART_TypeDef *USARTx, uint32_t DataWidth) +{ + MODIFY_REG(USARTx->CR1, USART_CR1_M, DataWidth); +} + +/** + * @brief Return Word length (i.e. nb of data bits, excluding start and stop bits) + * @rmtoll CR1 M LL_USART_GetDataWidth + * @param USARTx USART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_USART_DATAWIDTH_8B + * @arg @ref LL_USART_DATAWIDTH_9B + */ +__STATIC_INLINE uint32_t LL_USART_GetDataWidth(USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR1, USART_CR1_M)); +} + +#if defined(USART_CR1_OVER8) +/** + * @brief Set Oversampling to 8-bit or 16-bit mode + * @rmtoll CR1 OVER8 LL_USART_SetOverSampling + * @param USARTx USART Instance + * @param OverSampling This parameter can be one of the following values: + * @arg @ref LL_USART_OVERSAMPLING_16 + * @arg @ref LL_USART_OVERSAMPLING_8 + * @retval None + */ +__STATIC_INLINE void LL_USART_SetOverSampling(USART_TypeDef *USARTx, uint32_t OverSampling) +{ + MODIFY_REG(USARTx->CR1, USART_CR1_OVER8, OverSampling); +} + +/** + * @brief Return Oversampling mode + * @rmtoll CR1 OVER8 LL_USART_GetOverSampling + * @param USARTx USART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_USART_OVERSAMPLING_16 + * @arg @ref LL_USART_OVERSAMPLING_8 + */ +__STATIC_INLINE uint32_t LL_USART_GetOverSampling(USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR1, USART_CR1_OVER8)); +} + +#endif /* USART_OverSampling_Feature */ +/** + * @brief Configure if Clock pulse of the last data bit is output to the SCLK pin or not + * @note Macro @ref IS_USART_INSTANCE(USARTx) can be used to check whether or not + * Synchronous mode is supported by the USARTx instance. + * @rmtoll CR2 LBCL LL_USART_SetLastClkPulseOutput + * @param USARTx USART Instance + * @param LastBitClockPulse This parameter can be one of the following values: + * @arg @ref LL_USART_LASTCLKPULSE_NO_OUTPUT + * @arg @ref LL_USART_LASTCLKPULSE_OUTPUT + * @retval None + */ +__STATIC_INLINE void LL_USART_SetLastClkPulseOutput(USART_TypeDef *USARTx, uint32_t LastBitClockPulse) +{ + MODIFY_REG(USARTx->CR2, USART_CR2_LBCL, LastBitClockPulse); +} + +/** + * @brief Retrieve Clock pulse of the last data bit output configuration + * (Last bit Clock pulse output to the SCLK pin or not) + * @note Macro @ref IS_USART_INSTANCE(USARTx) can be used to check whether or not + * Synchronous mode is supported by the USARTx instance. + * @rmtoll CR2 LBCL LL_USART_GetLastClkPulseOutput + * @param USARTx USART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_USART_LASTCLKPULSE_NO_OUTPUT + * @arg @ref LL_USART_LASTCLKPULSE_OUTPUT + */ +__STATIC_INLINE uint32_t LL_USART_GetLastClkPulseOutput(USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR2, USART_CR2_LBCL)); +} + +/** + * @brief Select the phase of the clock output on the SCLK pin in synchronous mode + * @note Macro @ref IS_USART_INSTANCE(USARTx) can be used to check whether or not + * Synchronous mode is supported by the USARTx instance. + * @rmtoll CR2 CPHA LL_USART_SetClockPhase + * @param USARTx USART Instance + * @param ClockPhase This parameter can be one of the following values: + * @arg @ref LL_USART_PHASE_1EDGE + * @arg @ref LL_USART_PHASE_2EDGE + * @retval None + */ +__STATIC_INLINE void LL_USART_SetClockPhase(USART_TypeDef *USARTx, uint32_t ClockPhase) +{ + MODIFY_REG(USARTx->CR2, USART_CR2_CPHA, ClockPhase); +} + +/** + * @brief Return phase of the clock output on the SCLK pin in synchronous mode + * @note Macro @ref IS_USART_INSTANCE(USARTx) can be used to check whether or not + * Synchronous mode is supported by the USARTx instance. + * @rmtoll CR2 CPHA LL_USART_GetClockPhase + * @param USARTx USART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_USART_PHASE_1EDGE + * @arg @ref LL_USART_PHASE_2EDGE + */ +__STATIC_INLINE uint32_t LL_USART_GetClockPhase(USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR2, USART_CR2_CPHA)); +} + +/** + * @brief Select the polarity of the clock output on the SCLK pin in synchronous mode + * @note Macro @ref IS_USART_INSTANCE(USARTx) can be used to check whether or not + * Synchronous mode is supported by the USARTx instance. + * @rmtoll CR2 CPOL LL_USART_SetClockPolarity + * @param USARTx USART Instance + * @param ClockPolarity This parameter can be one of the following values: + * @arg @ref LL_USART_POLARITY_LOW + * @arg @ref LL_USART_POLARITY_HIGH + * @retval None + */ +__STATIC_INLINE void LL_USART_SetClockPolarity(USART_TypeDef *USARTx, uint32_t ClockPolarity) +{ + MODIFY_REG(USARTx->CR2, USART_CR2_CPOL, ClockPolarity); +} + +/** + * @brief Return polarity of the clock output on the SCLK pin in synchronous mode + * @note Macro @ref IS_USART_INSTANCE(USARTx) can be used to check whether or not + * Synchronous mode is supported by the USARTx instance. + * @rmtoll CR2 CPOL LL_USART_GetClockPolarity + * @param USARTx USART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_USART_POLARITY_LOW + * @arg @ref LL_USART_POLARITY_HIGH + */ +__STATIC_INLINE uint32_t LL_USART_GetClockPolarity(USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR2, USART_CR2_CPOL)); +} + +/** + * @brief Configure Clock signal format (Phase Polarity and choice about output of last bit clock pulse) + * @note Macro @ref IS_USART_INSTANCE(USARTx) can be used to check whether or not + * Synchronous mode is supported by the USARTx instance. + * @note Call of this function is equivalent to following function call sequence : + * - Clock Phase configuration using @ref LL_USART_SetClockPhase() function + * - Clock Polarity configuration using @ref LL_USART_SetClockPolarity() function + * - Output of Last bit Clock pulse configuration using @ref LL_USART_SetLastClkPulseOutput() function + * @rmtoll CR2 CPHA LL_USART_ConfigClock\n + * CR2 CPOL LL_USART_ConfigClock\n + * CR2 LBCL LL_USART_ConfigClock + * @param USARTx USART Instance + * @param Phase This parameter can be one of the following values: + * @arg @ref LL_USART_PHASE_1EDGE + * @arg @ref LL_USART_PHASE_2EDGE + * @param Polarity This parameter can be one of the following values: + * @arg @ref LL_USART_POLARITY_LOW + * @arg @ref LL_USART_POLARITY_HIGH + * @param LBCPOutput This parameter can be one of the following values: + * @arg @ref LL_USART_LASTCLKPULSE_NO_OUTPUT + * @arg @ref LL_USART_LASTCLKPULSE_OUTPUT + * @retval None + */ +__STATIC_INLINE void LL_USART_ConfigClock(USART_TypeDef *USARTx, uint32_t Phase, uint32_t Polarity, uint32_t LBCPOutput) +{ + MODIFY_REG(USARTx->CR2, USART_CR2_CPHA | USART_CR2_CPOL | USART_CR2_LBCL, Phase | Polarity | LBCPOutput); +} + +/** + * @brief Enable Clock output on SCLK pin + * @note Macro @ref IS_USART_INSTANCE(USARTx) can be used to check whether or not + * Synchronous mode is supported by the USARTx instance. + * @rmtoll CR2 CLKEN LL_USART_EnableSCLKOutput + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableSCLKOutput(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->CR2, USART_CR2_CLKEN); +} + +/** + * @brief Disable Clock output on SCLK pin + * @note Macro @ref IS_USART_INSTANCE(USARTx) can be used to check whether or not + * Synchronous mode is supported by the USARTx instance. + * @rmtoll CR2 CLKEN LL_USART_DisableSCLKOutput + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableSCLKOutput(USART_TypeDef *USARTx) +{ + CLEAR_BIT(USARTx->CR2, USART_CR2_CLKEN); +} + +/** + * @brief Indicate if Clock output on SCLK pin is enabled + * @note Macro @ref IS_USART_INSTANCE(USARTx) can be used to check whether or not + * Synchronous mode is supported by the USARTx instance. + * @rmtoll CR2 CLKEN LL_USART_IsEnabledSCLKOutput + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledSCLKOutput(USART_TypeDef *USARTx) +{ + return (READ_BIT(USARTx->CR2, USART_CR2_CLKEN) == (USART_CR2_CLKEN)); +} + +/** + * @brief Set the length of the stop bits + * @rmtoll CR2 STOP LL_USART_SetStopBitsLength + * @param USARTx USART Instance + * @param StopBits This parameter can be one of the following values: + * @arg @ref LL_USART_STOPBITS_0_5 + * @arg @ref LL_USART_STOPBITS_1 + * @arg @ref LL_USART_STOPBITS_1_5 + * @arg @ref LL_USART_STOPBITS_2 + * @retval None + */ +__STATIC_INLINE void LL_USART_SetStopBitsLength(USART_TypeDef *USARTx, uint32_t StopBits) +{ + MODIFY_REG(USARTx->CR2, USART_CR2_STOP, StopBits); +} + +/** + * @brief Retrieve the length of the stop bits + * @rmtoll CR2 STOP LL_USART_GetStopBitsLength + * @param USARTx USART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_USART_STOPBITS_0_5 + * @arg @ref LL_USART_STOPBITS_1 + * @arg @ref LL_USART_STOPBITS_1_5 + * @arg @ref LL_USART_STOPBITS_2 + */ +__STATIC_INLINE uint32_t LL_USART_GetStopBitsLength(USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR2, USART_CR2_STOP)); +} + +/** + * @brief Configure Character frame format (Datawidth, Parity control, Stop Bits) + * @note Call of this function is equivalent to following function call sequence : + * - Data Width configuration using @ref LL_USART_SetDataWidth() function + * - Parity Control and mode configuration using @ref LL_USART_SetParity() function + * - Stop bits configuration using @ref LL_USART_SetStopBitsLength() function + * @rmtoll CR1 PS LL_USART_ConfigCharacter\n + * CR1 PCE LL_USART_ConfigCharacter\n + * CR1 M LL_USART_ConfigCharacter\n + * CR2 STOP LL_USART_ConfigCharacter + * @param USARTx USART Instance + * @param DataWidth This parameter can be one of the following values: + * @arg @ref LL_USART_DATAWIDTH_8B + * @arg @ref LL_USART_DATAWIDTH_9B + * @param Parity This parameter can be one of the following values: + * @arg @ref LL_USART_PARITY_NONE + * @arg @ref LL_USART_PARITY_EVEN + * @arg @ref LL_USART_PARITY_ODD + * @param StopBits This parameter can be one of the following values: + * @arg @ref LL_USART_STOPBITS_0_5 + * @arg @ref LL_USART_STOPBITS_1 + * @arg @ref LL_USART_STOPBITS_1_5 + * @arg @ref LL_USART_STOPBITS_2 + * @retval None + */ +__STATIC_INLINE void LL_USART_ConfigCharacter(USART_TypeDef *USARTx, uint32_t DataWidth, uint32_t Parity, + uint32_t StopBits) +{ + MODIFY_REG(USARTx->CR1, USART_CR1_PS | USART_CR1_PCE | USART_CR1_M, Parity | DataWidth); + MODIFY_REG(USARTx->CR2, USART_CR2_STOP, StopBits); +} + +/** + * @brief Set Address of the USART node. + * @note This is used in multiprocessor communication during Mute mode or Stop mode, + * for wake up with address mark detection. + * @rmtoll CR2 ADD LL_USART_SetNodeAddress + * @param USARTx USART Instance + * @param NodeAddress 4 bit Address of the USART node. + * @retval None + */ +__STATIC_INLINE void LL_USART_SetNodeAddress(USART_TypeDef *USARTx, uint32_t NodeAddress) +{ + MODIFY_REG(USARTx->CR2, USART_CR2_ADD, (NodeAddress & USART_CR2_ADD)); +} + +/** + * @brief Return 4 bit Address of the USART node as set in ADD field of CR2. + * @note only 4bits (b3-b0) of returned value are relevant (b31-b4 are not relevant) + * @rmtoll CR2 ADD LL_USART_GetNodeAddress + * @param USARTx USART Instance + * @retval Address of the USART node (Value between Min_Data=0 and Max_Data=255) + */ +__STATIC_INLINE uint32_t LL_USART_GetNodeAddress(USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR2, USART_CR2_ADD)); +} + +/** + * @brief Enable RTS HW Flow Control + * @note Macro @ref IS_UART_HWFLOW_INSTANCE(USARTx) can be used to check whether or not + * Hardware Flow control feature is supported by the USARTx instance. + * @rmtoll CR3 RTSE LL_USART_EnableRTSHWFlowCtrl + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableRTSHWFlowCtrl(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->CR3, USART_CR3_RTSE); +} + +/** + * @brief Disable RTS HW Flow Control + * @note Macro @ref IS_UART_HWFLOW_INSTANCE(USARTx) can be used to check whether or not + * Hardware Flow control feature is supported by the USARTx instance. + * @rmtoll CR3 RTSE LL_USART_DisableRTSHWFlowCtrl + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableRTSHWFlowCtrl(USART_TypeDef *USARTx) +{ + CLEAR_BIT(USARTx->CR3, USART_CR3_RTSE); +} + +/** + * @brief Enable CTS HW Flow Control + * @note Macro @ref IS_UART_HWFLOW_INSTANCE(USARTx) can be used to check whether or not + * Hardware Flow control feature is supported by the USARTx instance. + * @rmtoll CR3 CTSE LL_USART_EnableCTSHWFlowCtrl + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableCTSHWFlowCtrl(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->CR3, USART_CR3_CTSE); +} + +/** + * @brief Disable CTS HW Flow Control + * @note Macro @ref IS_UART_HWFLOW_INSTANCE(USARTx) can be used to check whether or not + * Hardware Flow control feature is supported by the USARTx instance. + * @rmtoll CR3 CTSE LL_USART_DisableCTSHWFlowCtrl + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableCTSHWFlowCtrl(USART_TypeDef *USARTx) +{ + CLEAR_BIT(USARTx->CR3, USART_CR3_CTSE); +} + +/** + * @brief Configure HW Flow Control mode (both CTS and RTS) + * @note Macro @ref IS_UART_HWFLOW_INSTANCE(USARTx) can be used to check whether or not + * Hardware Flow control feature is supported by the USARTx instance. + * @rmtoll CR3 RTSE LL_USART_SetHWFlowCtrl\n + * CR3 CTSE LL_USART_SetHWFlowCtrl + * @param USARTx USART Instance + * @param HardwareFlowControl This parameter can be one of the following values: + * @arg @ref LL_USART_HWCONTROL_NONE + * @arg @ref LL_USART_HWCONTROL_RTS + * @arg @ref LL_USART_HWCONTROL_CTS + * @arg @ref LL_USART_HWCONTROL_RTS_CTS + * @retval None + */ +__STATIC_INLINE void LL_USART_SetHWFlowCtrl(USART_TypeDef *USARTx, uint32_t HardwareFlowControl) +{ + MODIFY_REG(USARTx->CR3, USART_CR3_RTSE | USART_CR3_CTSE, HardwareFlowControl); +} + +/** + * @brief Return HW Flow Control configuration (both CTS and RTS) + * @note Macro @ref IS_UART_HWFLOW_INSTANCE(USARTx) can be used to check whether or not + * Hardware Flow control feature is supported by the USARTx instance. + * @rmtoll CR3 RTSE LL_USART_GetHWFlowCtrl\n + * CR3 CTSE LL_USART_GetHWFlowCtrl + * @param USARTx USART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_USART_HWCONTROL_NONE + * @arg @ref LL_USART_HWCONTROL_RTS + * @arg @ref LL_USART_HWCONTROL_CTS + * @arg @ref LL_USART_HWCONTROL_RTS_CTS + */ +__STATIC_INLINE uint32_t LL_USART_GetHWFlowCtrl(USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR3, USART_CR3_RTSE | USART_CR3_CTSE)); +} + +#if defined(USART_CR3_ONEBIT) +/** + * @brief Enable One bit sampling method + * @rmtoll CR3 ONEBIT LL_USART_EnableOneBitSamp + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableOneBitSamp(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->CR3, USART_CR3_ONEBIT); +} + +/** + * @brief Disable One bit sampling method + * @rmtoll CR3 ONEBIT LL_USART_DisableOneBitSamp + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableOneBitSamp(USART_TypeDef *USARTx) +{ + CLEAR_BIT(USARTx->CR3, USART_CR3_ONEBIT); +} + +/** + * @brief Indicate if One bit sampling method is enabled + * @rmtoll CR3 ONEBIT LL_USART_IsEnabledOneBitSamp + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledOneBitSamp(USART_TypeDef *USARTx) +{ + return (READ_BIT(USARTx->CR3, USART_CR3_ONEBIT) == (USART_CR3_ONEBIT)); +} +#endif /* USART_OneBitSampling_Feature */ + +#if defined(USART_CR1_OVER8) +/** + * @brief Configure USART BRR register for achieving expected Baud Rate value. + * @note Compute and set USARTDIV value in BRR Register (full BRR content) + * according to used Peripheral Clock, Oversampling mode, and expected Baud Rate values + * @note Peripheral clock and Baud rate values provided as function parameters should be valid + * (Baud rate value != 0) + * @rmtoll BRR BRR LL_USART_SetBaudRate + * @param USARTx USART Instance + * @param PeriphClk Peripheral Clock + * @param OverSampling This parameter can be one of the following values: + * @arg @ref LL_USART_OVERSAMPLING_16 + * @arg @ref LL_USART_OVERSAMPLING_8 + * @param BaudRate Baud Rate + * @retval None + */ +__STATIC_INLINE void LL_USART_SetBaudRate(USART_TypeDef *USARTx, uint32_t PeriphClk, uint32_t OverSampling, + uint32_t BaudRate) +{ + if (OverSampling == LL_USART_OVERSAMPLING_8) + { + USARTx->BRR = (uint16_t)(__LL_USART_DIV_SAMPLING8(PeriphClk, BaudRate)); + } + else + { + USARTx->BRR = (uint16_t)(__LL_USART_DIV_SAMPLING16(PeriphClk, BaudRate)); + } +} + +/** + * @brief Return current Baud Rate value, according to USARTDIV present in BRR register + * (full BRR content), and to used Peripheral Clock and Oversampling mode values + * @note In case of non-initialized or invalid value stored in BRR register, value 0 will be returned. + * @rmtoll BRR BRR LL_USART_GetBaudRate + * @param USARTx USART Instance + * @param PeriphClk Peripheral Clock + * @param OverSampling This parameter can be one of the following values: + * @arg @ref LL_USART_OVERSAMPLING_16 + * @arg @ref LL_USART_OVERSAMPLING_8 + * @retval Baud Rate + */ +__STATIC_INLINE uint32_t LL_USART_GetBaudRate(USART_TypeDef *USARTx, uint32_t PeriphClk, uint32_t OverSampling) +{ + uint32_t usartdiv = 0x0U; + uint32_t brrresult = 0x0U; + + usartdiv = USARTx->BRR; + + if (OverSampling == LL_USART_OVERSAMPLING_8) + { + if ((usartdiv & 0xFFF7U) != 0U) + { + usartdiv = (uint16_t)((usartdiv & 0xFFF0U) | ((usartdiv & 0x0007U) << 1U)) ; + brrresult = (PeriphClk * 2U) / usartdiv; + } + } + else + { + if ((usartdiv & 0xFFFFU) != 0U) + { + brrresult = PeriphClk / usartdiv; + } + } + return (brrresult); +} +#else +/** + * @brief Configure USART BRR register for achieving expected Baud Rate value. + * @note Compute and set USARTDIV value in BRR Register (full BRR content) + * according to used Peripheral Clock, Oversampling mode, and expected Baud Rate values + * @note Peripheral clock and Baud rate values provided as function parameters should be valid + * (Baud rate value != 0) + * @rmtoll BRR BRR LL_USART_SetBaudRate + * @param USARTx USART Instance + * @param PeriphClk Peripheral Clock + * @param BaudRate Baud Rate + * @retval None + */ +__STATIC_INLINE void LL_USART_SetBaudRate(USART_TypeDef *USARTx, uint32_t PeriphClk, uint32_t BaudRate) +{ + USARTx->BRR = (uint16_t)(__LL_USART_DIV_SAMPLING16(PeriphClk, BaudRate)); +} + +/** + * @brief Return current Baud Rate value, according to USARTDIV present in BRR register + * (full BRR content), and to used Peripheral Clock and Oversampling mode values + * @note In case of non-initialized or invalid value stored in BRR register, value 0 will be returned. + * @rmtoll BRR BRR LL_USART_GetBaudRate + * @param USARTx USART Instance + * @param PeriphClk Peripheral Clock + * @retval Baud Rate + */ +__STATIC_INLINE uint32_t LL_USART_GetBaudRate(USART_TypeDef *USARTx, uint32_t PeriphClk) +{ + uint32_t usartdiv = 0x0U; + uint32_t brrresult = 0x0U; + + usartdiv = USARTx->BRR; + + if ((usartdiv & 0xFFFFU) != 0U) + { + brrresult = PeriphClk / usartdiv; + } + return (brrresult); +} +#endif /* USART_OverSampling_Feature */ + +/** + * @} + */ + +/** @defgroup USART_LL_EF_Configuration_IRDA Configuration functions related to Irda feature + * @{ + */ + +/** + * @brief Enable IrDA mode + * @note Macro @ref IS_IRDA_INSTANCE(USARTx) can be used to check whether or not + * IrDA feature is supported by the USARTx instance. + * @rmtoll CR3 IREN LL_USART_EnableIrda + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableIrda(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->CR3, USART_CR3_IREN); +} + +/** + * @brief Disable IrDA mode + * @note Macro @ref IS_IRDA_INSTANCE(USARTx) can be used to check whether or not + * IrDA feature is supported by the USARTx instance. + * @rmtoll CR3 IREN LL_USART_DisableIrda + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableIrda(USART_TypeDef *USARTx) +{ + CLEAR_BIT(USARTx->CR3, USART_CR3_IREN); +} + +/** + * @brief Indicate if IrDA mode is enabled + * @note Macro @ref IS_IRDA_INSTANCE(USARTx) can be used to check whether or not + * IrDA feature is supported by the USARTx instance. + * @rmtoll CR3 IREN LL_USART_IsEnabledIrda + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledIrda(USART_TypeDef *USARTx) +{ + return (READ_BIT(USARTx->CR3, USART_CR3_IREN) == (USART_CR3_IREN)); +} + +/** + * @brief Configure IrDA Power Mode (Normal or Low Power) + * @note Macro @ref IS_IRDA_INSTANCE(USARTx) can be used to check whether or not + * IrDA feature is supported by the USARTx instance. + * @rmtoll CR3 IRLP LL_USART_SetIrdaPowerMode + * @param USARTx USART Instance + * @param PowerMode This parameter can be one of the following values: + * @arg @ref LL_USART_IRDA_POWER_NORMAL + * @arg @ref LL_USART_IRDA_POWER_LOW + * @retval None + */ +__STATIC_INLINE void LL_USART_SetIrdaPowerMode(USART_TypeDef *USARTx, uint32_t PowerMode) +{ + MODIFY_REG(USARTx->CR3, USART_CR3_IRLP, PowerMode); +} + +/** + * @brief Retrieve IrDA Power Mode configuration (Normal or Low Power) + * @note Macro @ref IS_IRDA_INSTANCE(USARTx) can be used to check whether or not + * IrDA feature is supported by the USARTx instance. + * @rmtoll CR3 IRLP LL_USART_GetIrdaPowerMode + * @param USARTx USART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_USART_IRDA_POWER_NORMAL + * @arg @ref LL_USART_PHASE_2EDGE + */ +__STATIC_INLINE uint32_t LL_USART_GetIrdaPowerMode(USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR3, USART_CR3_IRLP)); +} + +/** + * @brief Set Irda prescaler value, used for dividing the USART clock source + * to achieve the Irda Low Power frequency (8 bits value) + * @note Macro @ref IS_IRDA_INSTANCE(USARTx) can be used to check whether or not + * IrDA feature is supported by the USARTx instance. + * @rmtoll GTPR PSC LL_USART_SetIrdaPrescaler + * @param USARTx USART Instance + * @param PrescalerValue Value between Min_Data=0x00 and Max_Data=0xFF + * @retval None + */ +__STATIC_INLINE void LL_USART_SetIrdaPrescaler(USART_TypeDef *USARTx, uint32_t PrescalerValue) +{ + MODIFY_REG(USARTx->GTPR, USART_GTPR_PSC, PrescalerValue); +} + +/** + * @brief Return Irda prescaler value, used for dividing the USART clock source + * to achieve the Irda Low Power frequency (8 bits value) + * @note Macro @ref IS_IRDA_INSTANCE(USARTx) can be used to check whether or not + * IrDA feature is supported by the USARTx instance. + * @rmtoll GTPR PSC LL_USART_GetIrdaPrescaler + * @param USARTx USART Instance + * @retval Irda prescaler value (Value between Min_Data=0x00 and Max_Data=0xFF) + */ +__STATIC_INLINE uint32_t LL_USART_GetIrdaPrescaler(USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->GTPR, USART_GTPR_PSC)); +} + +/** + * @} + */ + +/** @defgroup USART_LL_EF_Configuration_Smartcard Configuration functions related to Smartcard feature + * @{ + */ + +/** + * @brief Enable Smartcard NACK transmission + * @note Macro @ref IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not + * Smartcard feature is supported by the USARTx instance. + * @rmtoll CR3 NACK LL_USART_EnableSmartcardNACK + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableSmartcardNACK(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->CR3, USART_CR3_NACK); +} + +/** + * @brief Disable Smartcard NACK transmission + * @note Macro @ref IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not + * Smartcard feature is supported by the USARTx instance. + * @rmtoll CR3 NACK LL_USART_DisableSmartcardNACK + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableSmartcardNACK(USART_TypeDef *USARTx) +{ + CLEAR_BIT(USARTx->CR3, USART_CR3_NACK); +} + +/** + * @brief Indicate if Smartcard NACK transmission is enabled + * @note Macro @ref IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not + * Smartcard feature is supported by the USARTx instance. + * @rmtoll CR3 NACK LL_USART_IsEnabledSmartcardNACK + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledSmartcardNACK(USART_TypeDef *USARTx) +{ + return (READ_BIT(USARTx->CR3, USART_CR3_NACK) == (USART_CR3_NACK)); +} + +/** + * @brief Enable Smartcard mode + * @note Macro @ref IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not + * Smartcard feature is supported by the USARTx instance. + * @rmtoll CR3 SCEN LL_USART_EnableSmartcard + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableSmartcard(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->CR3, USART_CR3_SCEN); +} + +/** + * @brief Disable Smartcard mode + * @note Macro @ref IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not + * Smartcard feature is supported by the USARTx instance. + * @rmtoll CR3 SCEN LL_USART_DisableSmartcard + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableSmartcard(USART_TypeDef *USARTx) +{ + CLEAR_BIT(USARTx->CR3, USART_CR3_SCEN); +} + +/** + * @brief Indicate if Smartcard mode is enabled + * @note Macro @ref IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not + * Smartcard feature is supported by the USARTx instance. + * @rmtoll CR3 SCEN LL_USART_IsEnabledSmartcard + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledSmartcard(USART_TypeDef *USARTx) +{ + return (READ_BIT(USARTx->CR3, USART_CR3_SCEN) == (USART_CR3_SCEN)); +} + +/** + * @brief Set Smartcard prescaler value, used for dividing the USART clock + * source to provide the SMARTCARD Clock (5 bits value) + * @note Macro @ref IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not + * Smartcard feature is supported by the USARTx instance. + * @rmtoll GTPR PSC LL_USART_SetSmartcardPrescaler + * @param USARTx USART Instance + * @param PrescalerValue Value between Min_Data=0 and Max_Data=31 + * @retval None + */ +__STATIC_INLINE void LL_USART_SetSmartcardPrescaler(USART_TypeDef *USARTx, uint32_t PrescalerValue) +{ + MODIFY_REG(USARTx->GTPR, USART_GTPR_PSC, PrescalerValue); +} + +/** + * @brief Return Smartcard prescaler value, used for dividing the USART clock + * source to provide the SMARTCARD Clock (5 bits value) + * @note Macro @ref IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not + * Smartcard feature is supported by the USARTx instance. + * @rmtoll GTPR PSC LL_USART_GetSmartcardPrescaler + * @param USARTx USART Instance + * @retval Smartcard prescaler value (Value between Min_Data=0 and Max_Data=31) + */ +__STATIC_INLINE uint32_t LL_USART_GetSmartcardPrescaler(USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->GTPR, USART_GTPR_PSC)); +} + +/** + * @brief Set Smartcard Guard time value, expressed in nb of baud clocks periods + * (GT[7:0] bits : Guard time value) + * @note Macro @ref IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not + * Smartcard feature is supported by the USARTx instance. + * @rmtoll GTPR GT LL_USART_SetSmartcardGuardTime + * @param USARTx USART Instance + * @param GuardTime Value between Min_Data=0x00 and Max_Data=0xFF + * @retval None + */ +__STATIC_INLINE void LL_USART_SetSmartcardGuardTime(USART_TypeDef *USARTx, uint32_t GuardTime) +{ + MODIFY_REG(USARTx->GTPR, USART_GTPR_GT, GuardTime << USART_POSITION_GTPR_GT); +} + +/** + * @brief Return Smartcard Guard time value, expressed in nb of baud clocks periods + * (GT[7:0] bits : Guard time value) + * @note Macro @ref IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not + * Smartcard feature is supported by the USARTx instance. + * @rmtoll GTPR GT LL_USART_GetSmartcardGuardTime + * @param USARTx USART Instance + * @retval Smartcard Guard time value (Value between Min_Data=0x00 and Max_Data=0xFF) + */ +__STATIC_INLINE uint32_t LL_USART_GetSmartcardGuardTime(USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->GTPR, USART_GTPR_GT) >> USART_POSITION_GTPR_GT); +} + +/** + * @} + */ + +/** @defgroup USART_LL_EF_Configuration_HalfDuplex Configuration functions related to Half Duplex feature + * @{ + */ + +/** + * @brief Enable Single Wire Half-Duplex mode + * @note Macro @ref IS_UART_HALFDUPLEX_INSTANCE(USARTx) can be used to check whether or not + * Half-Duplex mode is supported by the USARTx instance. + * @rmtoll CR3 HDSEL LL_USART_EnableHalfDuplex + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableHalfDuplex(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->CR3, USART_CR3_HDSEL); +} + +/** + * @brief Disable Single Wire Half-Duplex mode + * @note Macro @ref IS_UART_HALFDUPLEX_INSTANCE(USARTx) can be used to check whether or not + * Half-Duplex mode is supported by the USARTx instance. + * @rmtoll CR3 HDSEL LL_USART_DisableHalfDuplex + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableHalfDuplex(USART_TypeDef *USARTx) +{ + CLEAR_BIT(USARTx->CR3, USART_CR3_HDSEL); +} + +/** + * @brief Indicate if Single Wire Half-Duplex mode is enabled + * @note Macro @ref IS_UART_HALFDUPLEX_INSTANCE(USARTx) can be used to check whether or not + * Half-Duplex mode is supported by the USARTx instance. + * @rmtoll CR3 HDSEL LL_USART_IsEnabledHalfDuplex + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledHalfDuplex(USART_TypeDef *USARTx) +{ + return (READ_BIT(USARTx->CR3, USART_CR3_HDSEL) == (USART_CR3_HDSEL)); +} + +/** + * @} + */ + +/** @defgroup USART_LL_EF_Configuration_LIN Configuration functions related to LIN feature + * @{ + */ + +/** + * @brief Set LIN Break Detection Length + * @note Macro @ref IS_UART_LIN_INSTANCE(USARTx) can be used to check whether or not + * LIN feature is supported by the USARTx instance. + * @rmtoll CR2 LBDL LL_USART_SetLINBrkDetectionLen + * @param USARTx USART Instance + * @param LINBDLength This parameter can be one of the following values: + * @arg @ref LL_USART_LINBREAK_DETECT_10B + * @arg @ref LL_USART_LINBREAK_DETECT_11B + * @retval None + */ +__STATIC_INLINE void LL_USART_SetLINBrkDetectionLen(USART_TypeDef *USARTx, uint32_t LINBDLength) +{ + MODIFY_REG(USARTx->CR2, USART_CR2_LBDL, LINBDLength); +} + +/** + * @brief Return LIN Break Detection Length + * @note Macro @ref IS_UART_LIN_INSTANCE(USARTx) can be used to check whether or not + * LIN feature is supported by the USARTx instance. + * @rmtoll CR2 LBDL LL_USART_GetLINBrkDetectionLen + * @param USARTx USART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_USART_LINBREAK_DETECT_10B + * @arg @ref LL_USART_LINBREAK_DETECT_11B + */ +__STATIC_INLINE uint32_t LL_USART_GetLINBrkDetectionLen(USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR2, USART_CR2_LBDL)); +} + +/** + * @brief Enable LIN mode + * @note Macro @ref IS_UART_LIN_INSTANCE(USARTx) can be used to check whether or not + * LIN feature is supported by the USARTx instance. + * @rmtoll CR2 LINEN LL_USART_EnableLIN + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableLIN(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->CR2, USART_CR2_LINEN); +} + +/** + * @brief Disable LIN mode + * @note Macro @ref IS_UART_LIN_INSTANCE(USARTx) can be used to check whether or not + * LIN feature is supported by the USARTx instance. + * @rmtoll CR2 LINEN LL_USART_DisableLIN + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableLIN(USART_TypeDef *USARTx) +{ + CLEAR_BIT(USARTx->CR2, USART_CR2_LINEN); +} + +/** + * @brief Indicate if LIN mode is enabled + * @note Macro @ref IS_UART_LIN_INSTANCE(USARTx) can be used to check whether or not + * LIN feature is supported by the USARTx instance. + * @rmtoll CR2 LINEN LL_USART_IsEnabledLIN + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledLIN(USART_TypeDef *USARTx) +{ + return (READ_BIT(USARTx->CR2, USART_CR2_LINEN) == (USART_CR2_LINEN)); +} + +/** + * @} + */ + +/** @defgroup USART_LL_EF_AdvancedConfiguration Advanced Configurations services + * @{ + */ + +/** + * @brief Perform basic configuration of USART for enabling use in Asynchronous Mode (UART) + * @note In UART mode, the following bits must be kept cleared: + * - LINEN bit in the USART_CR2 register, + * - CLKEN bit in the USART_CR2 register, + * - SCEN bit in the USART_CR3 register, + * - IREN bit in the USART_CR3 register, + * - HDSEL bit in the USART_CR3 register. + * @note Call of this function is equivalent to following function call sequence : + * - Clear LINEN in CR2 using @ref LL_USART_DisableLIN() function + * - Clear CLKEN in CR2 using @ref LL_USART_DisableSCLKOutput() function + * - Clear SCEN in CR3 using @ref LL_USART_DisableSmartcard() function + * - Clear IREN in CR3 using @ref LL_USART_DisableIrda() function + * - Clear HDSEL in CR3 using @ref LL_USART_DisableHalfDuplex() function + * @note Other remaining configurations items related to Asynchronous Mode + * (as Baud Rate, Word length, Parity, ...) should be set using + * dedicated functions + * @rmtoll CR2 LINEN LL_USART_ConfigAsyncMode\n + * CR2 CLKEN LL_USART_ConfigAsyncMode\n + * CR3 SCEN LL_USART_ConfigAsyncMode\n + * CR3 IREN LL_USART_ConfigAsyncMode\n + * CR3 HDSEL LL_USART_ConfigAsyncMode + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_ConfigAsyncMode(USART_TypeDef *USARTx) +{ + /* In Asynchronous mode, the following bits must be kept cleared: + - LINEN, CLKEN bits in the USART_CR2 register, + - SCEN, IREN and HDSEL bits in the USART_CR3 register.*/ + CLEAR_BIT(USARTx->CR2, (USART_CR2_LINEN | USART_CR2_CLKEN)); + CLEAR_BIT(USARTx->CR3, (USART_CR3_SCEN | USART_CR3_IREN | USART_CR3_HDSEL)); +} + +/** + * @brief Perform basic configuration of USART for enabling use in Synchronous Mode + * @note In Synchronous mode, the following bits must be kept cleared: + * - LINEN bit in the USART_CR2 register, + * - SCEN bit in the USART_CR3 register, + * - IREN bit in the USART_CR3 register, + * - HDSEL bit in the USART_CR3 register. + * This function also sets the USART in Synchronous mode. + * @note Macro @ref IS_USART_INSTANCE(USARTx) can be used to check whether or not + * Synchronous mode is supported by the USARTx instance. + * @note Call of this function is equivalent to following function call sequence : + * - Clear LINEN in CR2 using @ref LL_USART_DisableLIN() function + * - Clear IREN in CR3 using @ref LL_USART_DisableIrda() function + * - Clear SCEN in CR3 using @ref LL_USART_DisableSmartcard() function + * - Clear HDSEL in CR3 using @ref LL_USART_DisableHalfDuplex() function + * - Set CLKEN in CR2 using @ref LL_USART_EnableSCLKOutput() function + * @note Other remaining configurations items related to Synchronous Mode + * (as Baud Rate, Word length, Parity, Clock Polarity, ...) should be set using + * dedicated functions + * @rmtoll CR2 LINEN LL_USART_ConfigSyncMode\n + * CR2 CLKEN LL_USART_ConfigSyncMode\n + * CR3 SCEN LL_USART_ConfigSyncMode\n + * CR3 IREN LL_USART_ConfigSyncMode\n + * CR3 HDSEL LL_USART_ConfigSyncMode + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_ConfigSyncMode(USART_TypeDef *USARTx) +{ + /* In Synchronous mode, the following bits must be kept cleared: + - LINEN bit in the USART_CR2 register, + - SCEN, IREN and HDSEL bits in the USART_CR3 register.*/ + CLEAR_BIT(USARTx->CR2, (USART_CR2_LINEN)); + CLEAR_BIT(USARTx->CR3, (USART_CR3_SCEN | USART_CR3_IREN | USART_CR3_HDSEL)); + /* set the UART/USART in Synchronous mode */ + SET_BIT(USARTx->CR2, USART_CR2_CLKEN); +} + +/** + * @brief Perform basic configuration of USART for enabling use in LIN Mode + * @note In LIN mode, the following bits must be kept cleared: + * - STOP and CLKEN bits in the USART_CR2 register, + * - SCEN bit in the USART_CR3 register, + * - IREN bit in the USART_CR3 register, + * - HDSEL bit in the USART_CR3 register. + * This function also set the UART/USART in LIN mode. + * @note Macro @ref IS_UART_LIN_INSTANCE(USARTx) can be used to check whether or not + * LIN feature is supported by the USARTx instance. + * @note Call of this function is equivalent to following function call sequence : + * - Clear CLKEN in CR2 using @ref LL_USART_DisableSCLKOutput() function + * - Clear STOP in CR2 using @ref LL_USART_SetStopBitsLength() function + * - Clear SCEN in CR3 using @ref LL_USART_DisableSmartcard() function + * - Clear IREN in CR3 using @ref LL_USART_DisableIrda() function + * - Clear HDSEL in CR3 using @ref LL_USART_DisableHalfDuplex() function + * - Set LINEN in CR2 using @ref LL_USART_EnableLIN() function + * @note Other remaining configurations items related to LIN Mode + * (as Baud Rate, Word length, LIN Break Detection Length, ...) should be set using + * dedicated functions + * @rmtoll CR2 CLKEN LL_USART_ConfigLINMode\n + * CR2 STOP LL_USART_ConfigLINMode\n + * CR2 LINEN LL_USART_ConfigLINMode\n + * CR3 IREN LL_USART_ConfigLINMode\n + * CR3 SCEN LL_USART_ConfigLINMode\n + * CR3 HDSEL LL_USART_ConfigLINMode + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_ConfigLINMode(USART_TypeDef *USARTx) +{ + /* In LIN mode, the following bits must be kept cleared: + - STOP and CLKEN bits in the USART_CR2 register, + - IREN, SCEN and HDSEL bits in the USART_CR3 register.*/ + CLEAR_BIT(USARTx->CR2, (USART_CR2_CLKEN | USART_CR2_STOP)); + CLEAR_BIT(USARTx->CR3, (USART_CR3_IREN | USART_CR3_SCEN | USART_CR3_HDSEL)); + /* Set the UART/USART in LIN mode */ + SET_BIT(USARTx->CR2, USART_CR2_LINEN); +} + +/** + * @brief Perform basic configuration of USART for enabling use in Half Duplex Mode + * @note In Half Duplex mode, the following bits must be kept cleared: + * - LINEN bit in the USART_CR2 register, + * - CLKEN bit in the USART_CR2 register, + * - SCEN bit in the USART_CR3 register, + * - IREN bit in the USART_CR3 register, + * This function also sets the UART/USART in Half Duplex mode. + * @note Macro @ref IS_UART_HALFDUPLEX_INSTANCE(USARTx) can be used to check whether or not + * Half-Duplex mode is supported by the USARTx instance. + * @note Call of this function is equivalent to following function call sequence : + * - Clear LINEN in CR2 using @ref LL_USART_DisableLIN() function + * - Clear CLKEN in CR2 using @ref LL_USART_DisableSCLKOutput() function + * - Clear SCEN in CR3 using @ref LL_USART_DisableSmartcard() function + * - Clear IREN in CR3 using @ref LL_USART_DisableIrda() function + * - Set HDSEL in CR3 using @ref LL_USART_EnableHalfDuplex() function + * @note Other remaining configurations items related to Half Duplex Mode + * (as Baud Rate, Word length, Parity, ...) should be set using + * dedicated functions + * @rmtoll CR2 LINEN LL_USART_ConfigHalfDuplexMode\n + * CR2 CLKEN LL_USART_ConfigHalfDuplexMode\n + * CR3 HDSEL LL_USART_ConfigHalfDuplexMode\n + * CR3 SCEN LL_USART_ConfigHalfDuplexMode\n + * CR3 IREN LL_USART_ConfigHalfDuplexMode + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_ConfigHalfDuplexMode(USART_TypeDef *USARTx) +{ + /* In Half Duplex mode, the following bits must be kept cleared: + - LINEN and CLKEN bits in the USART_CR2 register, + - SCEN and IREN bits in the USART_CR3 register.*/ + CLEAR_BIT(USARTx->CR2, (USART_CR2_LINEN | USART_CR2_CLKEN)); + CLEAR_BIT(USARTx->CR3, (USART_CR3_SCEN | USART_CR3_IREN)); + /* set the UART/USART in Half Duplex mode */ + SET_BIT(USARTx->CR3, USART_CR3_HDSEL); +} + +/** + * @brief Perform basic configuration of USART for enabling use in Smartcard Mode + * @note In Smartcard mode, the following bits must be kept cleared: + * - LINEN bit in the USART_CR2 register, + * - IREN bit in the USART_CR3 register, + * - HDSEL bit in the USART_CR3 register. + * This function also configures Stop bits to 1.5 bits and + * sets the USART in Smartcard mode (SCEN bit). + * Clock Output is also enabled (CLKEN). + * @note Macro @ref IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not + * Smartcard feature is supported by the USARTx instance. + * @note Call of this function is equivalent to following function call sequence : + * - Clear LINEN in CR2 using @ref LL_USART_DisableLIN() function + * - Clear IREN in CR3 using @ref LL_USART_DisableIrda() function + * - Clear HDSEL in CR3 using @ref LL_USART_DisableHalfDuplex() function + * - Configure STOP in CR2 using @ref LL_USART_SetStopBitsLength() function + * - Set CLKEN in CR2 using @ref LL_USART_EnableSCLKOutput() function + * - Set SCEN in CR3 using @ref LL_USART_EnableSmartcard() function + * @note Other remaining configurations items related to Smartcard Mode + * (as Baud Rate, Word length, Parity, ...) should be set using + * dedicated functions + * @rmtoll CR2 LINEN LL_USART_ConfigSmartcardMode\n + * CR2 STOP LL_USART_ConfigSmartcardMode\n + * CR2 CLKEN LL_USART_ConfigSmartcardMode\n + * CR3 HDSEL LL_USART_ConfigSmartcardMode\n + * CR3 SCEN LL_USART_ConfigSmartcardMode + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_ConfigSmartcardMode(USART_TypeDef *USARTx) +{ + /* In Smartcard mode, the following bits must be kept cleared: + - LINEN bit in the USART_CR2 register, + - IREN and HDSEL bits in the USART_CR3 register.*/ + CLEAR_BIT(USARTx->CR2, (USART_CR2_LINEN)); + CLEAR_BIT(USARTx->CR3, (USART_CR3_IREN | USART_CR3_HDSEL)); + /* Configure Stop bits to 1.5 bits */ + /* Synchronous mode is activated by default */ + SET_BIT(USARTx->CR2, (USART_CR2_STOP_0 | USART_CR2_STOP_1 | USART_CR2_CLKEN)); + /* set the UART/USART in Smartcard mode */ + SET_BIT(USARTx->CR3, USART_CR3_SCEN); +} + +/** + * @brief Perform basic configuration of USART for enabling use in Irda Mode + * @note In IRDA mode, the following bits must be kept cleared: + * - LINEN bit in the USART_CR2 register, + * - STOP and CLKEN bits in the USART_CR2 register, + * - SCEN bit in the USART_CR3 register, + * - HDSEL bit in the USART_CR3 register. + * This function also sets the UART/USART in IRDA mode (IREN bit). + * @note Macro @ref IS_IRDA_INSTANCE(USARTx) can be used to check whether or not + * IrDA feature is supported by the USARTx instance. + * @note Call of this function is equivalent to following function call sequence : + * - Clear LINEN in CR2 using @ref LL_USART_DisableLIN() function + * - Clear CLKEN in CR2 using @ref LL_USART_DisableSCLKOutput() function + * - Clear SCEN in CR3 using @ref LL_USART_DisableSmartcard() function + * - Clear HDSEL in CR3 using @ref LL_USART_DisableHalfDuplex() function + * - Configure STOP in CR2 using @ref LL_USART_SetStopBitsLength() function + * - Set IREN in CR3 using @ref LL_USART_EnableIrda() function + * @note Other remaining configurations items related to Irda Mode + * (as Baud Rate, Word length, Power mode, ...) should be set using + * dedicated functions + * @rmtoll CR2 LINEN LL_USART_ConfigIrdaMode\n + * CR2 CLKEN LL_USART_ConfigIrdaMode\n + * CR2 STOP LL_USART_ConfigIrdaMode\n + * CR3 SCEN LL_USART_ConfigIrdaMode\n + * CR3 HDSEL LL_USART_ConfigIrdaMode\n + * CR3 IREN LL_USART_ConfigIrdaMode + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_ConfigIrdaMode(USART_TypeDef *USARTx) +{ + /* In IRDA mode, the following bits must be kept cleared: + - LINEN, STOP and CLKEN bits in the USART_CR2 register, + - SCEN and HDSEL bits in the USART_CR3 register.*/ + CLEAR_BIT(USARTx->CR2, (USART_CR2_LINEN | USART_CR2_CLKEN | USART_CR2_STOP)); + CLEAR_BIT(USARTx->CR3, (USART_CR3_SCEN | USART_CR3_HDSEL)); + /* set the UART/USART in IRDA mode */ + SET_BIT(USARTx->CR3, USART_CR3_IREN); +} + +/** + * @brief Perform basic configuration of USART for enabling use in Multi processor Mode + * (several USARTs connected in a network, one of the USARTs can be the master, + * its TX output connected to the RX inputs of the other slaves USARTs). + * @note In MultiProcessor mode, the following bits must be kept cleared: + * - LINEN bit in the USART_CR2 register, + * - CLKEN bit in the USART_CR2 register, + * - SCEN bit in the USART_CR3 register, + * - IREN bit in the USART_CR3 register, + * - HDSEL bit in the USART_CR3 register. + * @note Call of this function is equivalent to following function call sequence : + * - Clear LINEN in CR2 using @ref LL_USART_DisableLIN() function + * - Clear CLKEN in CR2 using @ref LL_USART_DisableSCLKOutput() function + * - Clear SCEN in CR3 using @ref LL_USART_DisableSmartcard() function + * - Clear IREN in CR3 using @ref LL_USART_DisableIrda() function + * - Clear HDSEL in CR3 using @ref LL_USART_DisableHalfDuplex() function + * @note Other remaining configurations items related to Multi processor Mode + * (as Baud Rate, Wake Up Method, Node address, ...) should be set using + * dedicated functions + * @rmtoll CR2 LINEN LL_USART_ConfigMultiProcessMode\n + * CR2 CLKEN LL_USART_ConfigMultiProcessMode\n + * CR3 SCEN LL_USART_ConfigMultiProcessMode\n + * CR3 HDSEL LL_USART_ConfigMultiProcessMode\n + * CR3 IREN LL_USART_ConfigMultiProcessMode + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_ConfigMultiProcessMode(USART_TypeDef *USARTx) +{ + /* In Multi Processor mode, the following bits must be kept cleared: + - LINEN and CLKEN bits in the USART_CR2 register, + - IREN, SCEN and HDSEL bits in the USART_CR3 register.*/ + CLEAR_BIT(USARTx->CR2, (USART_CR2_LINEN | USART_CR2_CLKEN)); + CLEAR_BIT(USARTx->CR3, (USART_CR3_SCEN | USART_CR3_HDSEL | USART_CR3_IREN)); +} + +/** + * @} + */ + +/** @defgroup USART_LL_EF_FLAG_Management FLAG_Management + * @{ + */ + +/** + * @brief Check if the USART Parity Error Flag is set or not + * @rmtoll SR PE LL_USART_IsActiveFlag_PE + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_PE(USART_TypeDef *USARTx) +{ + return (READ_BIT(USARTx->SR, USART_SR_PE) == (USART_SR_PE)); +} + +/** + * @brief Check if the USART Framing Error Flag is set or not + * @rmtoll SR FE LL_USART_IsActiveFlag_FE + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_FE(USART_TypeDef *USARTx) +{ + return (READ_BIT(USARTx->SR, USART_SR_FE) == (USART_SR_FE)); +} + +/** + * @brief Check if the USART Noise error detected Flag is set or not + * @rmtoll SR NF LL_USART_IsActiveFlag_NE + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_NE(USART_TypeDef *USARTx) +{ + return (READ_BIT(USARTx->SR, USART_SR_NE) == (USART_SR_NE)); +} + +/** + * @brief Check if the USART OverRun Error Flag is set or not + * @rmtoll SR ORE LL_USART_IsActiveFlag_ORE + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_ORE(USART_TypeDef *USARTx) +{ + return (READ_BIT(USARTx->SR, USART_SR_ORE) == (USART_SR_ORE)); +} + +/** + * @brief Check if the USART IDLE line detected Flag is set or not + * @rmtoll SR IDLE LL_USART_IsActiveFlag_IDLE + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_IDLE(USART_TypeDef *USARTx) +{ + return (READ_BIT(USARTx->SR, USART_SR_IDLE) == (USART_SR_IDLE)); +} + +/** + * @brief Check if the USART Read Data Register Not Empty Flag is set or not + * @rmtoll SR RXNE LL_USART_IsActiveFlag_RXNE + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_RXNE(USART_TypeDef *USARTx) +{ + return (READ_BIT(USARTx->SR, USART_SR_RXNE) == (USART_SR_RXNE)); +} + +/** + * @brief Check if the USART Transmission Complete Flag is set or not + * @rmtoll SR TC LL_USART_IsActiveFlag_TC + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_TC(USART_TypeDef *USARTx) +{ + return (READ_BIT(USARTx->SR, USART_SR_TC) == (USART_SR_TC)); +} + +/** + * @brief Check if the USART Transmit Data Register Empty Flag is set or not + * @rmtoll SR TXE LL_USART_IsActiveFlag_TXE + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_TXE(USART_TypeDef *USARTx) +{ + return (READ_BIT(USARTx->SR, USART_SR_TXE) == (USART_SR_TXE)); +} + +/** + * @brief Check if the USART LIN Break Detection Flag is set or not + * @note Macro @ref IS_UART_LIN_INSTANCE(USARTx) can be used to check whether or not + * LIN feature is supported by the USARTx instance. + * @rmtoll SR LBD LL_USART_IsActiveFlag_LBD + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_LBD(USART_TypeDef *USARTx) +{ + return (READ_BIT(USARTx->SR, USART_SR_LBD) == (USART_SR_LBD)); +} + +/** + * @brief Check if the USART CTS Flag is set or not + * @note Macro @ref IS_UART_HWFLOW_INSTANCE(USARTx) can be used to check whether or not + * Hardware Flow control feature is supported by the USARTx instance. + * @rmtoll SR CTS LL_USART_IsActiveFlag_nCTS + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_nCTS(USART_TypeDef *USARTx) +{ + return (READ_BIT(USARTx->SR, USART_SR_CTS) == (USART_SR_CTS)); +} + +/** + * @brief Check if the USART Send Break Flag is set or not + * @rmtoll CR1 SBK LL_USART_IsActiveFlag_SBK + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_SBK(USART_TypeDef *USARTx) +{ + return (READ_BIT(USARTx->CR1, USART_CR1_SBK) == (USART_CR1_SBK)); +} + +/** + * @brief Check if the USART Receive Wake Up from mute mode Flag is set or not + * @rmtoll CR1 RWU LL_USART_IsActiveFlag_RWU + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_RWU(USART_TypeDef *USARTx) +{ + return (READ_BIT(USARTx->CR1, USART_CR1_RWU) == (USART_CR1_RWU)); +} + +/** + * @brief Clear Parity Error Flag + * @note Clearing this flag is done by a read access to the USARTx_SR + * register followed by a read access to the USARTx_DR register. + * @note Please also consider that when clearing this flag, other flags as + * NE, FE, ORE, IDLE would also be cleared. + * @rmtoll SR PE LL_USART_ClearFlag_PE + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_ClearFlag_PE(USART_TypeDef *USARTx) +{ + __IO uint32_t tmpreg; + tmpreg = USARTx->SR; + (void) tmpreg; + tmpreg = USARTx->DR; + (void) tmpreg; +} + +/** + * @brief Clear Framing Error Flag + * @note Clearing this flag is done by a read access to the USARTx_SR + * register followed by a read access to the USARTx_DR register. + * @note Please also consider that when clearing this flag, other flags as + * PE, NE, ORE, IDLE would also be cleared. + * @rmtoll SR FE LL_USART_ClearFlag_FE + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_ClearFlag_FE(USART_TypeDef *USARTx) +{ + __IO uint32_t tmpreg; + tmpreg = USARTx->SR; + (void) tmpreg; + tmpreg = USARTx->DR; + (void) tmpreg; +} + +/** + * @brief Clear Noise detected Flag + * @note Clearing this flag is done by a read access to the USARTx_SR + * register followed by a read access to the USARTx_DR register. + * @note Please also consider that when clearing this flag, other flags as + * PE, FE, ORE, IDLE would also be cleared. + * @rmtoll SR NF LL_USART_ClearFlag_NE + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_ClearFlag_NE(USART_TypeDef *USARTx) +{ + __IO uint32_t tmpreg; + tmpreg = USARTx->SR; + (void) tmpreg; + tmpreg = USARTx->DR; + (void) tmpreg; +} + +/** + * @brief Clear OverRun Error Flag + * @note Clearing this flag is done by a read access to the USARTx_SR + * register followed by a read access to the USARTx_DR register. + * @note Please also consider that when clearing this flag, other flags as + * PE, NE, FE, IDLE would also be cleared. + * @rmtoll SR ORE LL_USART_ClearFlag_ORE + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_ClearFlag_ORE(USART_TypeDef *USARTx) +{ + __IO uint32_t tmpreg; + tmpreg = USARTx->SR; + (void) tmpreg; + tmpreg = USARTx->DR; + (void) tmpreg; +} + +/** + * @brief Clear IDLE line detected Flag + * @note Clearing this flag is done by a read access to the USARTx_SR + * register followed by a read access to the USARTx_DR register. + * @note Please also consider that when clearing this flag, other flags as + * PE, NE, FE, ORE would also be cleared. + * @rmtoll SR IDLE LL_USART_ClearFlag_IDLE + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_ClearFlag_IDLE(USART_TypeDef *USARTx) +{ + __IO uint32_t tmpreg; + tmpreg = USARTx->SR; + (void) tmpreg; + tmpreg = USARTx->DR; + (void) tmpreg; +} + +/** + * @brief Clear Transmission Complete Flag + * @rmtoll SR TC LL_USART_ClearFlag_TC + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_ClearFlag_TC(USART_TypeDef *USARTx) +{ + WRITE_REG(USARTx->SR, ~(USART_SR_TC)); +} + +/** + * @brief Clear RX Not Empty Flag + * @rmtoll SR RXNE LL_USART_ClearFlag_RXNE + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_ClearFlag_RXNE(USART_TypeDef *USARTx) +{ + WRITE_REG(USARTx->SR, ~(USART_SR_RXNE)); +} + +/** + * @brief Clear LIN Break Detection Flag + * @note Macro @ref IS_UART_LIN_INSTANCE(USARTx) can be used to check whether or not + * LIN feature is supported by the USARTx instance. + * @rmtoll SR LBD LL_USART_ClearFlag_LBD + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_ClearFlag_LBD(USART_TypeDef *USARTx) +{ + WRITE_REG(USARTx->SR, ~(USART_SR_LBD)); +} + +/** + * @brief Clear CTS Interrupt Flag + * @note Macro @ref IS_UART_HWFLOW_INSTANCE(USARTx) can be used to check whether or not + * Hardware Flow control feature is supported by the USARTx instance. + * @rmtoll SR CTS LL_USART_ClearFlag_nCTS + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_ClearFlag_nCTS(USART_TypeDef *USARTx) +{ + WRITE_REG(USARTx->SR, ~(USART_SR_CTS)); +} + +/** + * @} + */ + +/** @defgroup USART_LL_EF_IT_Management IT_Management + * @{ + */ + +/** + * @brief Enable IDLE Interrupt + * @rmtoll CR1 IDLEIE LL_USART_EnableIT_IDLE + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableIT_IDLE(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->CR1, USART_CR1_IDLEIE); +} + +/** + * @brief Enable RX Not Empty Interrupt + * @rmtoll CR1 RXNEIE LL_USART_EnableIT_RXNE + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableIT_RXNE(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->CR1, USART_CR1_RXNEIE); +} + +/** + * @brief Enable Transmission Complete Interrupt + * @rmtoll CR1 TCIE LL_USART_EnableIT_TC + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableIT_TC(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->CR1, USART_CR1_TCIE); +} + +/** + * @brief Enable TX Empty Interrupt + * @rmtoll CR1 TXEIE LL_USART_EnableIT_TXE + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableIT_TXE(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->CR1, USART_CR1_TXEIE); +} + +/** + * @brief Enable Parity Error Interrupt + * @rmtoll CR1 PEIE LL_USART_EnableIT_PE + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableIT_PE(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->CR1, USART_CR1_PEIE); +} + +/** + * @brief Enable LIN Break Detection Interrupt + * @note Macro @ref IS_UART_LIN_INSTANCE(USARTx) can be used to check whether or not + * LIN feature is supported by the USARTx instance. + * @rmtoll CR2 LBDIE LL_USART_EnableIT_LBD + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableIT_LBD(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->CR2, USART_CR2_LBDIE); +} + +/** + * @brief Enable Error Interrupt + * @note When set, Error Interrupt Enable Bit is enabling interrupt generation in case of a framing + * error, overrun error or noise flag (FE=1 or ORE=1 or NF=1 in the USARTx_SR register). + * 0: Interrupt is inhibited + * 1: An interrupt is generated when FE=1 or ORE=1 or NF=1 in the USARTx_SR register. + * @rmtoll CR3 EIE LL_USART_EnableIT_ERROR + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableIT_ERROR(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->CR3, USART_CR3_EIE); +} + +/** + * @brief Enable CTS Interrupt + * @note Macro @ref IS_UART_HWFLOW_INSTANCE(USARTx) can be used to check whether or not + * Hardware Flow control feature is supported by the USARTx instance. + * @rmtoll CR3 CTSIE LL_USART_EnableIT_CTS + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableIT_CTS(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->CR3, USART_CR3_CTSIE); +} + +/** + * @brief Disable IDLE Interrupt + * @rmtoll CR1 IDLEIE LL_USART_DisableIT_IDLE + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableIT_IDLE(USART_TypeDef *USARTx) +{ + CLEAR_BIT(USARTx->CR1, USART_CR1_IDLEIE); +} + +/** + * @brief Disable RX Not Empty Interrupt + * @rmtoll CR1 RXNEIE LL_USART_DisableIT_RXNE + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableIT_RXNE(USART_TypeDef *USARTx) +{ + CLEAR_BIT(USARTx->CR1, USART_CR1_RXNEIE); +} + +/** + * @brief Disable Transmission Complete Interrupt + * @rmtoll CR1 TCIE LL_USART_DisableIT_TC + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableIT_TC(USART_TypeDef *USARTx) +{ + CLEAR_BIT(USARTx->CR1, USART_CR1_TCIE); +} + +/** + * @brief Disable TX Empty Interrupt + * @rmtoll CR1 TXEIE LL_USART_DisableIT_TXE + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableIT_TXE(USART_TypeDef *USARTx) +{ + CLEAR_BIT(USARTx->CR1, USART_CR1_TXEIE); +} + +/** + * @brief Disable Parity Error Interrupt + * @rmtoll CR1 PEIE LL_USART_DisableIT_PE + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableIT_PE(USART_TypeDef *USARTx) +{ + CLEAR_BIT(USARTx->CR1, USART_CR1_PEIE); +} + +/** + * @brief Disable LIN Break Detection Interrupt + * @note Macro @ref IS_UART_LIN_INSTANCE(USARTx) can be used to check whether or not + * LIN feature is supported by the USARTx instance. + * @rmtoll CR2 LBDIE LL_USART_DisableIT_LBD + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableIT_LBD(USART_TypeDef *USARTx) +{ + CLEAR_BIT(USARTx->CR2, USART_CR2_LBDIE); +} + +/** + * @brief Disable Error Interrupt + * @note When set, Error Interrupt Enable Bit is enabling interrupt generation in case of a framing + * error, overrun error or noise flag (FE=1 or ORE=1 or NF=1 in the USARTx_SR register). + * 0: Interrupt is inhibited + * 1: An interrupt is generated when FE=1 or ORE=1 or NF=1 in the USARTx_SR register. + * @rmtoll CR3 EIE LL_USART_DisableIT_ERROR + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableIT_ERROR(USART_TypeDef *USARTx) +{ + CLEAR_BIT(USARTx->CR3, USART_CR3_EIE); +} + +/** + * @brief Disable CTS Interrupt + * @note Macro @ref IS_UART_HWFLOW_INSTANCE(USARTx) can be used to check whether or not + * Hardware Flow control feature is supported by the USARTx instance. + * @rmtoll CR3 CTSIE LL_USART_DisableIT_CTS + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableIT_CTS(USART_TypeDef *USARTx) +{ + CLEAR_BIT(USARTx->CR3, USART_CR3_CTSIE); +} + +/** + * @brief Check if the USART IDLE Interrupt source is enabled or disabled. + * @rmtoll CR1 IDLEIE LL_USART_IsEnabledIT_IDLE + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledIT_IDLE(USART_TypeDef *USARTx) +{ + return (READ_BIT(USARTx->CR1, USART_CR1_IDLEIE) == (USART_CR1_IDLEIE)); +} + +/** + * @brief Check if the USART RX Not Empty Interrupt is enabled or disabled. + * @rmtoll CR1 RXNEIE LL_USART_IsEnabledIT_RXNE + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledIT_RXNE(USART_TypeDef *USARTx) +{ + return (READ_BIT(USARTx->CR1, USART_CR1_RXNEIE) == (USART_CR1_RXNEIE)); +} + +/** + * @brief Check if the USART Transmission Complete Interrupt is enabled or disabled. + * @rmtoll CR1 TCIE LL_USART_IsEnabledIT_TC + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledIT_TC(USART_TypeDef *USARTx) +{ + return (READ_BIT(USARTx->CR1, USART_CR1_TCIE) == (USART_CR1_TCIE)); +} + +/** + * @brief Check if the USART TX Empty Interrupt is enabled or disabled. + * @rmtoll CR1 TXEIE LL_USART_IsEnabledIT_TXE + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledIT_TXE(USART_TypeDef *USARTx) +{ + return (READ_BIT(USARTx->CR1, USART_CR1_TXEIE) == (USART_CR1_TXEIE)); +} + +/** + * @brief Check if the USART Parity Error Interrupt is enabled or disabled. + * @rmtoll CR1 PEIE LL_USART_IsEnabledIT_PE + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledIT_PE(USART_TypeDef *USARTx) +{ + return (READ_BIT(USARTx->CR1, USART_CR1_PEIE) == (USART_CR1_PEIE)); +} + +/** + * @brief Check if the USART LIN Break Detection Interrupt is enabled or disabled. + * @note Macro @ref IS_UART_LIN_INSTANCE(USARTx) can be used to check whether or not + * LIN feature is supported by the USARTx instance. + * @rmtoll CR2 LBDIE LL_USART_IsEnabledIT_LBD + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledIT_LBD(USART_TypeDef *USARTx) +{ + return (READ_BIT(USARTx->CR2, USART_CR2_LBDIE) == (USART_CR2_LBDIE)); +} + +/** + * @brief Check if the USART Error Interrupt is enabled or disabled. + * @rmtoll CR3 EIE LL_USART_IsEnabledIT_ERROR + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledIT_ERROR(USART_TypeDef *USARTx) +{ + return (READ_BIT(USARTx->CR3, USART_CR3_EIE) == (USART_CR3_EIE)); +} + +/** + * @brief Check if the USART CTS Interrupt is enabled or disabled. + * @note Macro @ref IS_UART_HWFLOW_INSTANCE(USARTx) can be used to check whether or not + * Hardware Flow control feature is supported by the USARTx instance. + * @rmtoll CR3 CTSIE LL_USART_IsEnabledIT_CTS + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledIT_CTS(USART_TypeDef *USARTx) +{ + return (READ_BIT(USARTx->CR3, USART_CR3_CTSIE) == (USART_CR3_CTSIE)); +} + +/** + * @} + */ + +/** @defgroup USART_LL_EF_DMA_Management DMA_Management + * @{ + */ + +/** + * @brief Enable DMA Mode for reception + * @rmtoll CR3 DMAR LL_USART_EnableDMAReq_RX + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableDMAReq_RX(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->CR3, USART_CR3_DMAR); +} + +/** + * @brief Disable DMA Mode for reception + * @rmtoll CR3 DMAR LL_USART_DisableDMAReq_RX + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableDMAReq_RX(USART_TypeDef *USARTx) +{ + CLEAR_BIT(USARTx->CR3, USART_CR3_DMAR); +} + +/** + * @brief Check if DMA Mode is enabled for reception + * @rmtoll CR3 DMAR LL_USART_IsEnabledDMAReq_RX + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledDMAReq_RX(USART_TypeDef *USARTx) +{ + return (READ_BIT(USARTx->CR3, USART_CR3_DMAR) == (USART_CR3_DMAR)); +} + +/** + * @brief Enable DMA Mode for transmission + * @rmtoll CR3 DMAT LL_USART_EnableDMAReq_TX + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableDMAReq_TX(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->CR3, USART_CR3_DMAT); +} + +/** + * @brief Disable DMA Mode for transmission + * @rmtoll CR3 DMAT LL_USART_DisableDMAReq_TX + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableDMAReq_TX(USART_TypeDef *USARTx) +{ + CLEAR_BIT(USARTx->CR3, USART_CR3_DMAT); +} + +/** + * @brief Check if DMA Mode is enabled for transmission + * @rmtoll CR3 DMAT LL_USART_IsEnabledDMAReq_TX + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledDMAReq_TX(USART_TypeDef *USARTx) +{ + return (READ_BIT(USARTx->CR3, USART_CR3_DMAT) == (USART_CR3_DMAT)); +} + +/** + * @brief Get the data register address used for DMA transfer + * @rmtoll DR DR LL_USART_DMA_GetRegAddr + * @note Address of Data Register is valid for both Transmit and Receive transfers. + * @param USARTx USART Instance + * @retval Address of data register + */ +__STATIC_INLINE uint32_t LL_USART_DMA_GetRegAddr(USART_TypeDef *USARTx) +{ + /* return address of DR register */ + return ((uint32_t) & (USARTx->DR)); +} + +/** + * @} + */ + +/** @defgroup USART_LL_EF_Data_Management Data_Management + * @{ + */ + +/** + * @brief Read Receiver Data register (Receive Data value, 8 bits) + * @rmtoll DR DR LL_USART_ReceiveData8 + * @param USARTx USART Instance + * @retval Value between Min_Data=0x00 and Max_Data=0xFF + */ +__STATIC_INLINE uint8_t LL_USART_ReceiveData8(USART_TypeDef *USARTx) +{ + return (uint8_t)(READ_BIT(USARTx->DR, USART_DR_DR)); +} + +/** + * @brief Read Receiver Data register (Receive Data value, 9 bits) + * @rmtoll DR DR LL_USART_ReceiveData9 + * @param USARTx USART Instance + * @retval Value between Min_Data=0x00 and Max_Data=0x1FF + */ +__STATIC_INLINE uint16_t LL_USART_ReceiveData9(USART_TypeDef *USARTx) +{ + return (uint16_t)(READ_BIT(USARTx->DR, USART_DR_DR)); +} + +/** + * @brief Write in Transmitter Data Register (Transmit Data value, 8 bits) + * @rmtoll DR DR LL_USART_TransmitData8 + * @param USARTx USART Instance + * @param Value between Min_Data=0x00 and Max_Data=0xFF + * @retval None + */ +__STATIC_INLINE void LL_USART_TransmitData8(USART_TypeDef *USARTx, uint8_t Value) +{ + USARTx->DR = Value; +} + +/** + * @brief Write in Transmitter Data Register (Transmit Data value, 9 bits) + * @rmtoll DR DR LL_USART_TransmitData9 + * @param USARTx USART Instance + * @param Value between Min_Data=0x00 and Max_Data=0x1FF + * @retval None + */ +__STATIC_INLINE void LL_USART_TransmitData9(USART_TypeDef *USARTx, uint16_t Value) +{ + USARTx->DR = Value & 0x1FFU; +} + +/** + * @} + */ + +/** @defgroup USART_LL_EF_Execution Execution + * @{ + */ + +/** + * @brief Request Break sending + * @rmtoll CR1 SBK LL_USART_RequestBreakSending + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_RequestBreakSending(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->CR1, USART_CR1_SBK); +} + +/** + * @brief Put USART in Mute mode + * @rmtoll CR1 RWU LL_USART_RequestEnterMuteMode + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_RequestEnterMuteMode(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->CR1, USART_CR1_RWU); +} + +/** + * @brief Put USART in Active mode + * @rmtoll CR1 RWU LL_USART_RequestExitMuteMode + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_RequestExitMuteMode(USART_TypeDef *USARTx) +{ + CLEAR_BIT(USARTx->CR1, USART_CR1_RWU); +} + +/** + * @} + */ + +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup USART_LL_EF_Init Initialization and de-initialization functions + * @{ + */ +ErrorStatus LL_USART_DeInit(USART_TypeDef *USARTx); +ErrorStatus LL_USART_Init(USART_TypeDef *USARTx, LL_USART_InitTypeDef *USART_InitStruct); +void LL_USART_StructInit(LL_USART_InitTypeDef *USART_InitStruct); +ErrorStatus LL_USART_ClockInit(USART_TypeDef *USARTx, LL_USART_ClockInitTypeDef *USART_ClockInitStruct); +void LL_USART_ClockStructInit(LL_USART_ClockInitTypeDef *USART_ClockInitStruct); +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* USART1 || USART2 || USART3 || UART4 || UART5 */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F1xx_LL_USART_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_usart.c b/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_usart.c new file mode 100644 index 0000000..3ee44a5 --- /dev/null +++ b/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_usart.c @@ -0,0 +1,446 @@ +/** + ****************************************************************************** + * @file stm32f1xx_ll_usart.c + * @author MCD Application Team + * @brief USART LL module driver. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +#if defined(USE_FULL_LL_DRIVER) + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f1xx_ll_usart.h" +#include "stm32f1xx_ll_rcc.h" +#include "stm32f1xx_ll_bus.h" +#ifdef USE_FULL_ASSERT +#include "stm32_assert.h" +#else +#define assert_param(expr) ((void)0U) +#endif + +/** @addtogroup STM32F1xx_LL_Driver + * @{ + */ + +#if defined (USART1) || defined (USART2) || defined (USART3) || defined (UART4) || defined (UART5) + +/** @addtogroup USART_LL + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/** @addtogroup USART_LL_Private_Constants + * @{ + */ + +/** + * @} + */ + + +/* Private macros ------------------------------------------------------------*/ +/** @addtogroup USART_LL_Private_Macros + * @{ + */ + +/* __BAUDRATE__ The maximum Baud Rate is derived from the maximum clock available + * divided by the smallest oversampling used on the USART (i.e. 8) */ +#define IS_LL_USART_BAUDRATE(__BAUDRATE__) ((__BAUDRATE__) <= 4500000U) + +/* __VALUE__ In case of oversampling by 16 and 8, BRR content must be greater than or equal to 16d. */ +#define IS_LL_USART_BRR_MIN(__VALUE__) ((__VALUE__) >= 16U) + +/* __VALUE__ BRR content must be lower than or equal to 0xFFFF. */ +#define IS_LL_USART_BRR_MAX(__VALUE__) ((__VALUE__) <= 0x0000FFFFU) + +#define IS_LL_USART_DIRECTION(__VALUE__) (((__VALUE__) == LL_USART_DIRECTION_NONE) \ + || ((__VALUE__) == LL_USART_DIRECTION_RX) \ + || ((__VALUE__) == LL_USART_DIRECTION_TX) \ + || ((__VALUE__) == LL_USART_DIRECTION_TX_RX)) + +#define IS_LL_USART_PARITY(__VALUE__) (((__VALUE__) == LL_USART_PARITY_NONE) \ + || ((__VALUE__) == LL_USART_PARITY_EVEN) \ + || ((__VALUE__) == LL_USART_PARITY_ODD)) + +#define IS_LL_USART_DATAWIDTH(__VALUE__) (((__VALUE__) == LL_USART_DATAWIDTH_8B) \ + || ((__VALUE__) == LL_USART_DATAWIDTH_9B)) + +#define IS_LL_USART_OVERSAMPLING(__VALUE__) (((__VALUE__) == LL_USART_OVERSAMPLING_16) \ + || ((__VALUE__) == LL_USART_OVERSAMPLING_8)) + +#define IS_LL_USART_LASTBITCLKOUTPUT(__VALUE__) (((__VALUE__) == LL_USART_LASTCLKPULSE_NO_OUTPUT) \ + || ((__VALUE__) == LL_USART_LASTCLKPULSE_OUTPUT)) + +#define IS_LL_USART_CLOCKPHASE(__VALUE__) (((__VALUE__) == LL_USART_PHASE_1EDGE) \ + || ((__VALUE__) == LL_USART_PHASE_2EDGE)) + +#define IS_LL_USART_CLOCKPOLARITY(__VALUE__) (((__VALUE__) == LL_USART_POLARITY_LOW) \ + || ((__VALUE__) == LL_USART_POLARITY_HIGH)) + +#define IS_LL_USART_CLOCKOUTPUT(__VALUE__) (((__VALUE__) == LL_USART_CLOCK_DISABLE) \ + || ((__VALUE__) == LL_USART_CLOCK_ENABLE)) + +#define IS_LL_USART_STOPBITS(__VALUE__) (((__VALUE__) == LL_USART_STOPBITS_0_5) \ + || ((__VALUE__) == LL_USART_STOPBITS_1) \ + || ((__VALUE__) == LL_USART_STOPBITS_1_5) \ + || ((__VALUE__) == LL_USART_STOPBITS_2)) + +#define IS_LL_USART_HWCONTROL(__VALUE__) (((__VALUE__) == LL_USART_HWCONTROL_NONE) \ + || ((__VALUE__) == LL_USART_HWCONTROL_RTS) \ + || ((__VALUE__) == LL_USART_HWCONTROL_CTS) \ + || ((__VALUE__) == LL_USART_HWCONTROL_RTS_CTS)) + +/** + * @} + */ + +/* Private function prototypes -----------------------------------------------*/ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup USART_LL_Exported_Functions + * @{ + */ + +/** @addtogroup USART_LL_EF_Init + * @{ + */ + +/** + * @brief De-initialize USART registers (Registers restored to their default values). + * @param USARTx USART Instance + * @retval An ErrorStatus enumeration value: + * - SUCCESS: USART registers are de-initialized + * - ERROR: USART registers are not de-initialized + */ +ErrorStatus LL_USART_DeInit(USART_TypeDef *USARTx) +{ + ErrorStatus status = SUCCESS; + + /* Check the parameters */ + assert_param(IS_UART_INSTANCE(USARTx)); + + if (USARTx == USART1) + { + /* Force reset of USART clock */ + LL_APB2_GRP1_ForceReset(LL_APB2_GRP1_PERIPH_USART1); + + /* Release reset of USART clock */ + LL_APB2_GRP1_ReleaseReset(LL_APB2_GRP1_PERIPH_USART1); + } + else if (USARTx == USART2) + { + /* Force reset of USART clock */ + LL_APB1_GRP1_ForceReset(LL_APB1_GRP1_PERIPH_USART2); + + /* Release reset of USART clock */ + LL_APB1_GRP1_ReleaseReset(LL_APB1_GRP1_PERIPH_USART2); + } +#if defined(USART3) + else if (USARTx == USART3) + { + /* Force reset of USART clock */ + LL_APB1_GRP1_ForceReset(LL_APB1_GRP1_PERIPH_USART3); + + /* Release reset of USART clock */ + LL_APB1_GRP1_ReleaseReset(LL_APB1_GRP1_PERIPH_USART3); + } +#endif /* USART3 */ +#if defined(UART4) + else if (USARTx == UART4) + { + /* Force reset of UART clock */ + LL_APB1_GRP1_ForceReset(LL_APB1_GRP1_PERIPH_UART4); + + /* Release reset of UART clock */ + LL_APB1_GRP1_ReleaseReset(LL_APB1_GRP1_PERIPH_UART4); + } +#endif /* UART4 */ +#if defined(UART5) + else if (USARTx == UART5) + { + /* Force reset of UART clock */ + LL_APB1_GRP1_ForceReset(LL_APB1_GRP1_PERIPH_UART5); + + /* Release reset of UART clock */ + LL_APB1_GRP1_ReleaseReset(LL_APB1_GRP1_PERIPH_UART5); + } +#endif /* UART5 */ + else + { + status = ERROR; + } + + return (status); +} + +/** + * @brief Initialize USART registers according to the specified + * parameters in USART_InitStruct. + * @note As some bits in USART configuration registers can only be written when the USART is disabled (USART_CR1_UE bit =0), + * USART IP should be in disabled state prior calling this function. Otherwise, ERROR result will be returned. + * @note Baud rate value stored in USART_InitStruct BaudRate field, should be valid (different from 0). + * @param USARTx USART Instance + * @param USART_InitStruct pointer to a LL_USART_InitTypeDef structure + * that contains the configuration information for the specified USART peripheral. + * @retval An ErrorStatus enumeration value: + * - SUCCESS: USART registers are initialized according to USART_InitStruct content + * - ERROR: Problem occurred during USART Registers initialization + */ +ErrorStatus LL_USART_Init(USART_TypeDef *USARTx, LL_USART_InitTypeDef *USART_InitStruct) +{ + ErrorStatus status = ERROR; + uint32_t periphclk = LL_RCC_PERIPH_FREQUENCY_NO; + LL_RCC_ClocksTypeDef rcc_clocks; + + /* Check the parameters */ + assert_param(IS_UART_INSTANCE(USARTx)); + assert_param(IS_LL_USART_BAUDRATE(USART_InitStruct->BaudRate)); + assert_param(IS_LL_USART_DATAWIDTH(USART_InitStruct->DataWidth)); + assert_param(IS_LL_USART_STOPBITS(USART_InitStruct->StopBits)); + assert_param(IS_LL_USART_PARITY(USART_InitStruct->Parity)); + assert_param(IS_LL_USART_DIRECTION(USART_InitStruct->TransferDirection)); + assert_param(IS_LL_USART_HWCONTROL(USART_InitStruct->HardwareFlowControl)); +#if defined(USART_CR1_OVER8) + assert_param(IS_LL_USART_OVERSAMPLING(USART_InitStruct->OverSampling)); +#endif /* USART_OverSampling_Feature */ + + /* USART needs to be in disabled state, in order to be able to configure some bits in + CRx registers */ + if (LL_USART_IsEnabled(USARTx) == 0U) + { + /*---------------------------- USART CR1 Configuration ----------------------- + * Configure USARTx CR1 (USART Word Length, Parity, Mode and Oversampling bits) with parameters: + * - DataWidth: USART_CR1_M bits according to USART_InitStruct->DataWidth value + * - Parity: USART_CR1_PCE, USART_CR1_PS bits according to USART_InitStruct->Parity value + * - TransferDirection: USART_CR1_TE, USART_CR1_RE bits according to USART_InitStruct->TransferDirection value + * - Oversampling: USART_CR1_OVER8 bit according to USART_InitStruct->OverSampling value. + */ +#if defined(USART_CR1_OVER8) + MODIFY_REG(USARTx->CR1, + (USART_CR1_M | USART_CR1_PCE | USART_CR1_PS | + USART_CR1_TE | USART_CR1_RE | USART_CR1_OVER8), + (USART_InitStruct->DataWidth | USART_InitStruct->Parity | + USART_InitStruct->TransferDirection | USART_InitStruct->OverSampling)); +#else + MODIFY_REG(USARTx->CR1, + (USART_CR1_M | USART_CR1_PCE | USART_CR1_PS | + USART_CR1_TE | USART_CR1_RE), + (USART_InitStruct->DataWidth | USART_InitStruct->Parity | + USART_InitStruct->TransferDirection)); +#endif /* USART_OverSampling_Feature */ + + /*---------------------------- USART CR2 Configuration ----------------------- + * Configure USARTx CR2 (Stop bits) with parameters: + * - Stop Bits: USART_CR2_STOP bits according to USART_InitStruct->StopBits value. + * - CLKEN, CPOL, CPHA and LBCL bits are to be configured using LL_USART_ClockInit(). + */ + LL_USART_SetStopBitsLength(USARTx, USART_InitStruct->StopBits); + + /*---------------------------- USART CR3 Configuration ----------------------- + * Configure USARTx CR3 (Hardware Flow Control) with parameters: + * - HardwareFlowControl: USART_CR3_RTSE, USART_CR3_CTSE bits according to USART_InitStruct->HardwareFlowControl value. + */ + LL_USART_SetHWFlowCtrl(USARTx, USART_InitStruct->HardwareFlowControl); + + /*---------------------------- USART BRR Configuration ----------------------- + * Retrieve Clock frequency used for USART Peripheral + */ + LL_RCC_GetSystemClocksFreq(&rcc_clocks); + if (USARTx == USART1) + { + periphclk = rcc_clocks.PCLK2_Frequency; + } + else if (USARTx == USART2) + { + periphclk = rcc_clocks.PCLK1_Frequency; + } +#if defined(USART3) + else if (USARTx == USART3) + { + periphclk = rcc_clocks.PCLK1_Frequency; + } +#endif /* USART3 */ +#if defined(UART4) + else if (USARTx == UART4) + { + periphclk = rcc_clocks.PCLK1_Frequency; + } +#endif /* UART4 */ +#if defined(UART5) + else if (USARTx == UART5) + { + periphclk = rcc_clocks.PCLK1_Frequency; + } +#endif /* UART5 */ + else + { + /* Nothing to do, as error code is already assigned to ERROR value */ + } + + /* Configure the USART Baud Rate : + - valid baud rate value (different from 0) is required + - Peripheral clock as returned by RCC service, should be valid (different from 0). + */ + if ((periphclk != LL_RCC_PERIPH_FREQUENCY_NO) + && (USART_InitStruct->BaudRate != 0U)) + { + status = SUCCESS; +#if defined(USART_CR1_OVER8) + LL_USART_SetBaudRate(USARTx, + periphclk, + USART_InitStruct->OverSampling, + USART_InitStruct->BaudRate); +#else + LL_USART_SetBaudRate(USARTx, + periphclk, + USART_InitStruct->BaudRate); +#endif /* USART_OverSampling_Feature */ + + /* Check BRR is greater than or equal to 16d */ + assert_param(IS_LL_USART_BRR_MIN(USARTx->BRR)); + + /* Check BRR is greater than or equal to 16d */ + assert_param(IS_LL_USART_BRR_MAX(USARTx->BRR)); + } + } + /* Endif (=> USART not in Disabled state => return ERROR) */ + + return (status); +} + +/** + * @brief Set each @ref LL_USART_InitTypeDef field to default value. + * @param USART_InitStruct Pointer to a @ref LL_USART_InitTypeDef structure + * whose fields will be set to default values. + * @retval None + */ + +void LL_USART_StructInit(LL_USART_InitTypeDef *USART_InitStruct) +{ + /* Set USART_InitStruct fields to default values */ + USART_InitStruct->BaudRate = 9600U; + USART_InitStruct->DataWidth = LL_USART_DATAWIDTH_8B; + USART_InitStruct->StopBits = LL_USART_STOPBITS_1; + USART_InitStruct->Parity = LL_USART_PARITY_NONE ; + USART_InitStruct->TransferDirection = LL_USART_DIRECTION_TX_RX; + USART_InitStruct->HardwareFlowControl = LL_USART_HWCONTROL_NONE; +#if defined(USART_CR1_OVER8) + USART_InitStruct->OverSampling = LL_USART_OVERSAMPLING_16; +#endif /* USART_OverSampling_Feature */ +} + +/** + * @brief Initialize USART Clock related settings according to the + * specified parameters in the USART_ClockInitStruct. + * @note As some bits in USART configuration registers can only be written when the USART is disabled (USART_CR1_UE bit =0), + * USART IP should be in disabled state prior calling this function. Otherwise, ERROR result will be returned. + * @param USARTx USART Instance + * @param USART_ClockInitStruct Pointer to a @ref LL_USART_ClockInitTypeDef structure + * that contains the Clock configuration information for the specified USART peripheral. + * @retval An ErrorStatus enumeration value: + * - SUCCESS: USART registers related to Clock settings are initialized according to USART_ClockInitStruct content + * - ERROR: Problem occurred during USART Registers initialization + */ +ErrorStatus LL_USART_ClockInit(USART_TypeDef *USARTx, LL_USART_ClockInitTypeDef *USART_ClockInitStruct) +{ + ErrorStatus status = SUCCESS; + + /* Check USART Instance and Clock signal output parameters */ + assert_param(IS_UART_INSTANCE(USARTx)); + assert_param(IS_LL_USART_CLOCKOUTPUT(USART_ClockInitStruct->ClockOutput)); + + /* USART needs to be in disabled state, in order to be able to configure some bits in + CRx registers */ + if (LL_USART_IsEnabled(USARTx) == 0U) + { + /*---------------------------- USART CR2 Configuration -----------------------*/ + /* If Clock signal has to be output */ + if (USART_ClockInitStruct->ClockOutput == LL_USART_CLOCK_DISABLE) + { + /* Deactivate Clock signal delivery : + * - Disable Clock Output: USART_CR2_CLKEN cleared + */ + LL_USART_DisableSCLKOutput(USARTx); + } + else + { + /* Ensure USART instance is USART capable */ + assert_param(IS_USART_INSTANCE(USARTx)); + + /* Check clock related parameters */ + assert_param(IS_LL_USART_CLOCKPOLARITY(USART_ClockInitStruct->ClockPolarity)); + assert_param(IS_LL_USART_CLOCKPHASE(USART_ClockInitStruct->ClockPhase)); + assert_param(IS_LL_USART_LASTBITCLKOUTPUT(USART_ClockInitStruct->LastBitClockPulse)); + + /*---------------------------- USART CR2 Configuration ----------------------- + * Configure USARTx CR2 (Clock signal related bits) with parameters: + * - Enable Clock Output: USART_CR2_CLKEN set + * - Clock Polarity: USART_CR2_CPOL bit according to USART_ClockInitStruct->ClockPolarity value + * - Clock Phase: USART_CR2_CPHA bit according to USART_ClockInitStruct->ClockPhase value + * - Last Bit Clock Pulse Output: USART_CR2_LBCL bit according to USART_ClockInitStruct->LastBitClockPulse value. + */ + MODIFY_REG(USARTx->CR2, + USART_CR2_CLKEN | USART_CR2_CPHA | USART_CR2_CPOL | USART_CR2_LBCL, + USART_CR2_CLKEN | USART_ClockInitStruct->ClockPolarity | + USART_ClockInitStruct->ClockPhase | USART_ClockInitStruct->LastBitClockPulse); + } + } + /* Else (USART not in Disabled state => return ERROR */ + else + { + status = ERROR; + } + + return (status); +} + +/** + * @brief Set each field of a @ref LL_USART_ClockInitTypeDef type structure to default value. + * @param USART_ClockInitStruct Pointer to a @ref LL_USART_ClockInitTypeDef structure + * whose fields will be set to default values. + * @retval None + */ +void LL_USART_ClockStructInit(LL_USART_ClockInitTypeDef *USART_ClockInitStruct) +{ + /* Set LL_USART_ClockInitStruct fields with default values */ + USART_ClockInitStruct->ClockOutput = LL_USART_CLOCK_DISABLE; + USART_ClockInitStruct->ClockPolarity = LL_USART_POLARITY_LOW; /* Not relevant when ClockOutput = LL_USART_CLOCK_DISABLE */ + USART_ClockInitStruct->ClockPhase = LL_USART_PHASE_1EDGE; /* Not relevant when ClockOutput = LL_USART_CLOCK_DISABLE */ + USART_ClockInitStruct->LastBitClockPulse = LL_USART_LASTCLKPULSE_NO_OUTPUT; /* Not relevant when ClockOutput = LL_USART_CLOCK_DISABLE */ +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* USART1 || USART2 || USART3 || UART4 || UART5 */ + +/** + * @} + */ + +#endif /* USE_FULL_LL_DRIVER */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ + diff --git a/Inc/dma.h b/Inc/dma.h index 3eef7ef..5bf37c6 100644 --- a/Inc/dma.h +++ b/Inc/dma.h @@ -1,8 +1,8 @@ /** ****************************************************************************** - * File Name : dma.h - * Description : This file contains all the function prototypes for - * the dma.c file + * @file dma.h + * @brief This file contains all the function prototypes for + * the dma.c file ****************************************************************************** * @attention * @@ -17,11 +17,11 @@ ****************************************************************************** */ /* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __dma_H -#define __dma_H +#ifndef __DMA_H__ +#define __DMA_H__ #ifdef __cplusplus - extern "C" { +extern "C" { #endif /* Includes ------------------------------------------------------------------*/ @@ -47,10 +47,6 @@ void MX_DMA_Init(void); } #endif -#endif /* __dma_H */ - -/** - * @} - */ +#endif /* __DMA_H__ */ /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/Inc/gpio.h b/Inc/gpio.h index 6fac8b7..220f619 100644 --- a/Inc/gpio.h +++ b/Inc/gpio.h @@ -1,8 +1,8 @@ /** ****************************************************************************** - * File Name : gpio.h - * Description : This file contains all the functions prototypes for - * the gpio + * @file gpio.h + * @brief This file contains all the function prototypes for + * the gpio.c file ****************************************************************************** * @attention * @@ -16,12 +16,12 @@ * ****************************************************************************** */ - /* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __gpio_H -#define __gpio_H +#ifndef __GPIO_H__ +#define __GPIO_H__ + #ifdef __cplusplus - extern "C" { +extern "C" { #endif /* Includes ------------------------------------------------------------------*/ @@ -44,14 +44,6 @@ void MX_GPIO_Init(void); #ifdef __cplusplus } #endif -#endif /*__ pinoutConfig_H */ - -/** - * @} - */ - -/** - * @} - */ +#endif /*__ GPIO_H__ */ /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/Inc/main.h b/Inc/main.h index 6175e12..6de644b 100644 --- a/Inc/main.h +++ b/Inc/main.h @@ -37,6 +37,8 @@ extern "C" { #include "stm32f1xx_ll_utils.h" #include "stm32f1xx_ll_pwr.h" #include "stm32f1xx_ll_spi.h" +#include "stm32f1xx_ll_usart.h" +#include "stm32f1xx.h" #include "stm32f1xx_ll_gpio.h" #if defined(USE_FULL_ASSERT) diff --git a/Inc/spi.h b/Inc/spi.h index 9c7e328..019b479 100644 --- a/Inc/spi.h +++ b/Inc/spi.h @@ -1,8 +1,8 @@ /** ****************************************************************************** - * File Name : SPI.h - * Description : This file provides code for the configuration - * of the SPI instances. + * @file spi.h + * @brief This file contains all the function prototypes for + * the spi.c file ****************************************************************************** * @attention * @@ -17,10 +17,11 @@ ****************************************************************************** */ /* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __spi_H -#define __spi_H +#ifndef __SPI_H__ +#define __SPI_H__ + #ifdef __cplusplus - extern "C" { +extern "C" { #endif /* Includes ------------------------------------------------------------------*/ @@ -43,14 +44,7 @@ void MX_SPI1_Init(void); #ifdef __cplusplus } #endif -#endif /*__ spi_H */ -/** - * @} - */ - -/** - * @} - */ +#endif /* __SPI_H__ */ /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/Inc/usart.h b/Inc/usart.h new file mode 100644 index 0000000..e0d7c78 --- /dev/null +++ b/Inc/usart.h @@ -0,0 +1,50 @@ +/** + ****************************************************************************** + * @file usart.h + * @brief This file contains all the function prototypes for + * the usart.c file + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2020 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under Ultimate Liberty license + * SLA0044, the "License"; You may not use this file except in compliance with + * the License. You may obtain a copy of the License at: + * www.st.com/SLA0044 + * + ****************************************************************************** + */ +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __USART_H__ +#define __USART_H__ + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "main.h" + +/* USER CODE BEGIN Includes */ + +/* USER CODE END Includes */ + +/* USER CODE BEGIN Private defines */ + +/* USER CODE END Private defines */ + +void MX_USART1_UART_Init(void); + +/* USER CODE BEGIN Prototypes */ + +/* USER CODE END Prototypes */ + +#ifdef __cplusplus +} +#endif + +#endif /* __USART_H__ */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/NeoPixelF103MVP.ioc b/NeoPixelF103MVP.ioc index bdc396f..c8da819 100644 --- a/NeoPixelF103MVP.ioc +++ b/NeoPixelF103MVP.ioc @@ -27,27 +27,30 @@ Mcu.IP2=NVIC Mcu.IP3=RCC Mcu.IP4=SPI1 Mcu.IP5=SYS -Mcu.IPNb=6 +Mcu.IP6=USART1 +Mcu.IPNb=7 Mcu.Name=STM32F103C(8-B)Tx Mcu.Package=LQFP48 Mcu.Pin0=PC13-TAMPER-RTC Mcu.Pin1=PC14-OSC32_IN -Mcu.Pin10=VP_FREERTOS_VS_CMSIS_V1 -Mcu.Pin11=VP_SYS_VS_Systick +Mcu.Pin10=PA13 +Mcu.Pin11=PA14 +Mcu.Pin12=VP_FREERTOS_VS_CMSIS_V1 +Mcu.Pin13=VP_SYS_VS_Systick Mcu.Pin2=PC15-OSC32_OUT Mcu.Pin3=PD0-OSC_IN Mcu.Pin4=PD1-OSC_OUT Mcu.Pin5=PA0-WKUP Mcu.Pin6=PA5 Mcu.Pin7=PA7 -Mcu.Pin8=PA13 -Mcu.Pin9=PA14 -Mcu.PinsNb=12 +Mcu.Pin8=PA9 +Mcu.Pin9=PA10 +Mcu.PinsNb=14 Mcu.ThirdPartyNb=0 Mcu.UserConstants= Mcu.UserName=STM32F103C8Tx -MxCube.Version=6.0.1 -MxDb.Version=DB.6.0.0 +MxCube.Version=6.1.0 +MxDb.Version=DB.6.0.10 NVIC.BusFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false NVIC.DMA1_Channel3_IRQn=true\:1\:0\:true\:false\:false\:false\:false\:false NVIC.DebugMonitor_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false @@ -55,14 +58,20 @@ NVIC.ForceEnableDMAVector=true NVIC.HardFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false NVIC.MemoryManagement_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false NVIC.NonMaskableInt_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false -NVIC.PendSV_IRQn=true\:0\:0\:false\:false\:false\:false\:false\:false +NVIC.PendSV_IRQn=true\:15\:0\:false\:false\:false\:true\:false\:false NVIC.PriorityGroup=NVIC_PRIORITYGROUP_4 NVIC.SVCall_IRQn=true\:0\:0\:false\:false\:false\:false\:false\:false NVIC.SavedPendsvIrqHandlerGenerated=true NVIC.SavedSvcallIrqHandlerGenerated=true NVIC.SavedSystickIrqHandlerGenerated=true -NVIC.SysTick_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:true +NVIC.SysTick_IRQn=true\:15\:0\:false\:false\:true\:true\:false\:true NVIC.UsageFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false +PA0-WKUP.GPIOParameters=GPIO_Speed +PA0-WKUP.GPIO_Speed=GPIO_SPEED_FREQ_MEDIUM +PA0-WKUP.Locked=true +PA0-WKUP.Signal=GPIO_Output +PA10.Mode=Asynchronous +PA10.Signal=USART1_RX PA13.Mode=Serial_Wire PA13.Signal=SYS_JTMS-SWDIO PA14.Mode=Serial_Wire @@ -71,6 +80,10 @@ PA5.Mode=TX_Only_Simplex_Unidirect_Master PA5.Signal=SPI1_SCK PA7.Mode=TX_Only_Simplex_Unidirect_Master PA7.Signal=SPI1_MOSI +PA9.Mode=Asynchronous +PA9.Signal=USART1_TX +PC13-TAMPER-RTC.GPIOParameters=GPIO_Speed +PC13-TAMPER-RTC.GPIO_Speed=GPIO_SPEED_FREQ_MEDIUM PC13-TAMPER-RTC.Locked=true PC13-TAMPER-RTC.Signal=GPIO_Output PC14-OSC32_IN.Mode=LSE-External-Oscillator @@ -109,7 +122,7 @@ ProjectManager.StackSize=0x400 ProjectManager.TargetToolchain=STM32CubeIDE ProjectManager.ToolChainLocation= ProjectManager.UnderRoot=true -ProjectManager.functionlistsort=1-MX_GPIO_Init-GPIO-false-LL-true,2-MX_DMA_Init-DMA-false-LL-true,3-SystemClock_Config-RCC-false-LL-false,4-MX_SPI1_Init-SPI1-false-LL-true +ProjectManager.functionlistsort=1-MX_GPIO_Init-GPIO-false-LL-true,2-MX_DMA_Init-DMA-false-LL-true,3-SystemClock_Config-RCC-false-LL-false,4-MX_SPI1_Init-SPI1-false-LL-true,5-MX_USART1_UART_Init-USART1-false-LL-true RCC.ADCFreqValue=36000000 RCC.AHBFreq_Value=72000000 RCC.APB1CLKDivider=RCC_HCLK_DIV2 @@ -137,6 +150,8 @@ SPI1.Direction=SPI_DIRECTION_2LINES SPI1.IPParameters=VirtualType,Mode,Direction,CalculateBaudRate,BaudRatePrescaler SPI1.Mode=SPI_MODE_MASTER SPI1.VirtualType=VM_MASTER +USART1.IPParameters=VirtualMode +USART1.VirtualMode=VM_ASYNC VP_FREERTOS_VS_CMSIS_V1.Mode=CMSIS_V1 VP_FREERTOS_VS_CMSIS_V1.Signal=FREERTOS_VS_CMSIS_V1 VP_SYS_VS_Systick.Mode=SysTick diff --git a/Src/dma.c b/Src/dma.c index f7cee27..182fbb3 100644 --- a/Src/dma.c +++ b/Src/dma.c @@ -1,8 +1,8 @@ /** ****************************************************************************** - * File Name : dma.c - * Description : This file provides code for the configuration - * of all the requested memory to memory DMA transfers. + * @file dma.c + * @brief This file provides code for the configuration + * of all the requested memory to memory DMA transfers. ****************************************************************************** * @attention * @@ -53,12 +53,4 @@ void MX_DMA_Init(void) /* USER CODE END 2 */ -/** - * @} - */ - -/** - * @} - */ - /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/Src/gpio.c b/Src/gpio.c index dfa0212..b338fef 100644 --- a/Src/gpio.c +++ b/Src/gpio.c @@ -1,8 +1,8 @@ /** ****************************************************************************** - * File Name : gpio.c - * Description : This file provides code for the configuration - * of all used GPIO pins. + * @file gpio.c + * @brief This file provides code for the configuration + * of all used GPIO pins. ****************************************************************************** * @attention * @@ -19,6 +19,7 @@ /* Includes ------------------------------------------------------------------*/ #include "gpio.h" + /* USER CODE BEGIN 0 */ /* USER CODE END 0 */ @@ -50,13 +51,23 @@ void MX_GPIO_Init(void) /**/ LL_GPIO_ResetOutputPin(GPIOC, LL_GPIO_PIN_13); + /**/ + LL_GPIO_ResetOutputPin(GPIOA, LL_GPIO_PIN_0); + /**/ GPIO_InitStruct.Pin = LL_GPIO_PIN_13; GPIO_InitStruct.Mode = LL_GPIO_MODE_OUTPUT; - GPIO_InitStruct.Speed = LL_GPIO_SPEED_FREQ_LOW; + GPIO_InitStruct.Speed = LL_GPIO_SPEED_FREQ_MEDIUM; GPIO_InitStruct.OutputType = LL_GPIO_OUTPUT_PUSHPULL; LL_GPIO_Init(GPIOC, &GPIO_InitStruct); + /**/ + GPIO_InitStruct.Pin = LL_GPIO_PIN_0; + GPIO_InitStruct.Mode = LL_GPIO_MODE_OUTPUT; + GPIO_InitStruct.Speed = LL_GPIO_SPEED_FREQ_MEDIUM; + GPIO_InitStruct.OutputType = LL_GPIO_OUTPUT_PUSHPULL; + LL_GPIO_Init(GPIOA, &GPIO_InitStruct); + } /* USER CODE BEGIN 2 */ diff --git a/Src/main.c b/Src/main.c index 0fc5868..1e363d9 100644 --- a/Src/main.c +++ b/Src/main.c @@ -22,6 +22,7 @@ #include "cmsis_os.h" #include "dma.h" #include "spi.h" +#include "usart.h" #include "gpio.h" /* Private includes ----------------------------------------------------------*/ @@ -84,6 +85,10 @@ int main(void) NVIC_SetPriorityGrouping(NVIC_PRIORITYGROUP_4); /* System interrupt init*/ + /* PendSV_IRQn interrupt configuration */ + NVIC_SetPriority(PendSV_IRQn, NVIC_EncodePriority(NVIC_GetPriorityGrouping(),15, 0)); + /* SysTick_IRQn interrupt configuration */ + NVIC_SetPriority(SysTick_IRQn, NVIC_EncodePriority(NVIC_GetPriorityGrouping(),15, 0)); /** NOJTAG: JTAG-DP Disabled and SW-DP Enabled */ @@ -104,6 +109,7 @@ int main(void) MX_GPIO_Init(); MX_DMA_Init(); MX_SPI1_Init(); + MX_USART1_UART_Init(); /* USER CODE BEGIN 2 */ LL_SYSTICK_EnableIT(); diff --git a/Src/spi.c b/Src/spi.c index ed8a660..1f8830c 100644 --- a/Src/spi.c +++ b/Src/spi.c @@ -1,8 +1,8 @@ /** ****************************************************************************** - * File Name : SPI.c - * Description : This file provides code for the configuration - * of the SPI instances. + * @file spi.c + * @brief This file provides code for the configuration + * of the SPI instances. ****************************************************************************** * @attention * diff --git a/Src/usart.c b/Src/usart.c new file mode 100644 index 0000000..a6c156b --- /dev/null +++ b/Src/usart.c @@ -0,0 +1,70 @@ +/** + ****************************************************************************** + * @file usart.c + * @brief This file provides code for the configuration + * of the USART instances. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2020 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under Ultimate Liberty license + * SLA0044, the "License"; You may not use this file except in compliance with + * the License. You may obtain a copy of the License at: + * www.st.com/SLA0044 + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "usart.h" + +/* USER CODE BEGIN 0 */ + +/* USER CODE END 0 */ + +/* USART1 init function */ + +void MX_USART1_UART_Init(void) +{ + LL_USART_InitTypeDef USART_InitStruct = {0}; + + LL_GPIO_InitTypeDef GPIO_InitStruct = {0}; + + /* Peripheral clock enable */ + LL_APB2_GRP1_EnableClock(LL_APB2_GRP1_PERIPH_USART1); + + LL_APB2_GRP1_EnableClock(LL_APB2_GRP1_PERIPH_GPIOA); + /**USART1 GPIO Configuration + PA9 ------> USART1_TX + PA10 ------> USART1_RX + */ + GPIO_InitStruct.Pin = LL_GPIO_PIN_9; + GPIO_InitStruct.Mode = LL_GPIO_MODE_ALTERNATE; + GPIO_InitStruct.Speed = LL_GPIO_SPEED_FREQ_HIGH; + GPIO_InitStruct.OutputType = LL_GPIO_OUTPUT_PUSHPULL; + LL_GPIO_Init(GPIOA, &GPIO_InitStruct); + + GPIO_InitStruct.Pin = LL_GPIO_PIN_10; + GPIO_InitStruct.Mode = LL_GPIO_MODE_FLOATING; + LL_GPIO_Init(GPIOA, &GPIO_InitStruct); + + USART_InitStruct.BaudRate = 115200; + USART_InitStruct.DataWidth = LL_USART_DATAWIDTH_8B; + USART_InitStruct.StopBits = LL_USART_STOPBITS_1; + USART_InitStruct.Parity = LL_USART_PARITY_NONE; + USART_InitStruct.TransferDirection = LL_USART_DIRECTION_TX_RX; + USART_InitStruct.HardwareFlowControl = LL_USART_HWCONTROL_NONE; + USART_InitStruct.OverSampling = LL_USART_OVERSAMPLING_16; + LL_USART_Init(USART1, &USART_InitStruct); + LL_USART_ConfigAsyncMode(USART1); + LL_USART_Enable(USART1); + +} + +/* USER CODE BEGIN 1 */ + +/* USER CODE END 1 */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/components/f1ll/consolehandler.cpp b/components/f1ll/consolehandler.cpp new file mode 100644 index 0000000..8579a6c --- /dev/null +++ b/components/f1ll/consolehandler.cpp @@ -0,0 +1,42 @@ +/* + * ll_consolehandler.cpp + * + * Created on: Nov 7, 2019 + * Author: abody + */ + +#include +#include "f1ll/consolehandler.h" + +namespace f1ll { + +ConsoleHandler::ConsoleHandler(USART_TypeDef *usart, DMA_TypeDef *dma, uint32_t channelRx, uint32_t channelTx) +: UsartCore(usart, dma, channelRx, channelTx) +{ +} + +void ConsoleHandler::ReceiverIdle(void) {} +void ConsoleHandler::TransmissionComplete(void) {} +void ConsoleHandler::FramingError(void) {} +void ConsoleHandler::Overrun(void) {} +void ConsoleHandler::RxDmaTransferComplete(void) {} +void ConsoleHandler::RxDmaHalfTransfer(void) {} +void ConsoleHandler::RxDmaError(void) {} +void ConsoleHandler::TxDmaTransferComplete(void) +{ + LL_USART_EnableIT_TC(m_usart); + LL_DMA_DisableChannel(m_txDma.GetDma(), m_txDma.GetChannel()); +} +void ConsoleHandler::TxDmaHalfTransfer(void) {} +void ConsoleHandler::TxDmaError(void) {} + +void ConsoleHandler::Print(char const *s) +{ + size_t len = strlen(s); + strncpy(m_buffer, s, sizeof( m_buffer)); + SetupTransmit(m_buffer, len > sizeof(m_buffer) ? sizeof(m_buffer) : len); +} + + +} /* namespace f4ll */ + diff --git a/components/f1ll/consolehandler.h b/components/f1ll/consolehandler.h new file mode 100644 index 0000000..53e33d3 --- /dev/null +++ b/components/f1ll/consolehandler.h @@ -0,0 +1,45 @@ +/* + * ll_consolehandler.h + * + * Created on: Nov 7, 2019 + * Author: abody + */ + +#ifndef LL_CONSOLEHANDLER_H_ +#define LL_CONSOLEHANDLER_H_ + +#include "f1ll/usartcore.h" +#include "singleton.h" + + +namespace f1ll { + +class ConsoleHandler: public UsartCore, public Singleton +{ + friend class Singleton; + +public: + void Print(char const *s); + +private: + ConsoleHandler(USART_TypeDef *usart, DMA_TypeDef *dma, uint32_t channelRx, uint32_t channelTx); + + // LL_UsartCore pure virtual function implementations + virtual void ReceiverIdle(void); + virtual void TransmissionComplete(void); + virtual void FramingError(void); + virtual void Overrun(void); + virtual void RxDmaTransferComplete(void); + virtual void RxDmaHalfTransfer(void); + virtual void RxDmaError(void); + virtual void TxDmaTransferComplete(void); + virtual void TxDmaHalfTransfer(void); + virtual void TxDmaError(void); + + char m_buffer[128]; + uint16_t m_used = 0; +}; + +} /* namespace f4ll */ + +#endif /* LL_CONSOLEHANDLER_H_ */ diff --git a/components/f1ll/dmahelper.cpp b/components/f1ll/dmahelper.cpp new file mode 100644 index 0000000..1a85b2b --- /dev/null +++ b/components/f1ll/dmahelper.cpp @@ -0,0 +1,30 @@ +/* +q * ll_dmahelper.cpp + * + * Created on: Oct 25, 2019 + * Author: abody + */ + +#include "f1ll/dmahelper.h" + +namespace f1ll { + +const uint32_t DmaHelper::m_TEMasks[7] = {DMA_ISR_TEIF1, DMA_ISR_TEIF2, DMA_ISR_TEIF3, DMA_ISR_TEIF4, DMA_ISR_TEIF5, DMA_ISR_TEIF6, DMA_ISR_TEIF7}; +const uint32_t DmaHelper::m_HTMasks[7] = {DMA_ISR_HTIF1, DMA_ISR_HTIF2, DMA_ISR_HTIF3, DMA_ISR_HTIF4, DMA_ISR_HTIF5, DMA_ISR_HTIF6, DMA_ISR_HTIF7}; +const uint32_t DmaHelper::m_TCMasks[7] = {DMA_ISR_TCIF1, DMA_ISR_TCIF2, DMA_ISR_TCIF3, DMA_ISR_TCIF4, DMA_ISR_TCIF5, DMA_ISR_TCIF6, DMA_ISR_TCIF7}; +const uint32_t DmaHelper::m_GIMasks[7] = {DMA_ISR_GIF1, DMA_ISR_GIF2, DMA_ISR_GIF3, DMA_ISR_GIF4, DMA_ISR_GIF5, DMA_ISR_GIF6, DMA_ISR_GIF7}; + +DmaHelper::DmaHelper(DMA_TypeDef *dma, uint32_t channel) +: m_dma(dma) +, m_channel(channel) +#ifdef DMA2 +, m_isReg(dma == DMA1 ? &DMA1->ISR : &DMA2->ISR) +, m_ifcReg(dma == DMA1 ? &DMA1->IFCR : &DMA2->IFCR) +#else +, m_isReg(&DMA1->ISR) +, m_ifcReg(&DMA1->IFCR) +#endif +{ +} + +} /* namespace f4ll */ diff --git a/components/f1ll/dmahelper.h b/components/f1ll/dmahelper.h new file mode 100644 index 0000000..ab4c4b2 --- /dev/null +++ b/components/f1ll/dmahelper.h @@ -0,0 +1,49 @@ +/* + * ll_dmahelper.h + * + * Created on: Oct 25, 2019 + * Author: abody + */ + +#ifndef LL_DMAHELPER_H_ +#define LL_DMAHELPER_H_ + +#include +#include + +namespace f1ll { + +class DmaHelper { +public: + DmaHelper(DMA_TypeDef *dma, uint32_t channel); + DmaHelper(DmaHelper const &base) = default; + + inline DMA_TypeDef* GetDma() const { return m_dma; } + inline uint32_t GetChannel() const { return m_channel; } + inline volatile uint32_t* GetIsReg() const { return m_isReg; } + inline volatile uint32_t* GetIfcReg() const { return m_ifcReg; } + inline uint32_t GetTeMask() const { return m_TEMasks[m_channel - 1]; } + inline uint32_t GetHtMask() const { return m_HTMasks[m_channel - 1]; } + inline uint32_t GetTcMask() const { return m_TCMasks[m_channel - 1]; } + inline uint32_t GetGiMask() const { return m_GIMasks[m_channel - 1]; } + + + inline bool IsEnabledIt_TE() { return LL_DMA_IsEnabledIT_TE(m_dma, m_channel) != 0; } + inline bool IsEnabledIt_HT() { return LL_DMA_IsEnabledIT_HT(m_dma, m_channel) != 0; } + inline bool IsEnabledIt_TC() { return LL_DMA_IsEnabledIT_TC(m_dma, m_channel) != 0; } + +private: + DMA_TypeDef *m_dma; + uint32_t m_channel; + volatile uint32_t *m_isReg; + volatile uint32_t *m_ifcReg; + + static const uint32_t m_TEMasks[7]; + static const uint32_t m_HTMasks[7]; + static const uint32_t m_TCMasks[7]; + static const uint32_t m_GIMasks[7]; +}; + +} /* namespace f4ll */ + +#endif /* LL_DMAHELPER_H_ */ diff --git a/components/f1ll/singleton.h b/components/f1ll/singleton.h new file mode 100644 index 0000000..b64c345 --- /dev/null +++ b/components/f1ll/singleton.h @@ -0,0 +1,26 @@ +#ifndef SINGLETON_H_ +#define SINGLETON_H_ + +#include + +template class Singleton { +public: + static T &Instance() { return *m_instance; } + template + static T &Init(Args &&... args) + { + static T instance{ std::forward(args)... }; + m_instance = &instance; + return instance; + } + +protected: + Singleton() = default; + Singleton(const Singleton &) = delete; + Singleton &operator=(const Singleton &) = delete; + static T *m_instance; +}; + +template T* Singleton::m_instance = nullptr; + +#endif /* SINGLETON_H_ */ diff --git a/components/f1ll/strutil.cpp b/components/f1ll/strutil.cpp new file mode 100644 index 0000000..4febf9e --- /dev/null +++ b/components/f1ll/strutil.cpp @@ -0,0 +1,110 @@ +#include +#include "f1ll/strutil.h" + +////////////////////////////////////////////////////////////////////////////// +size_t strcpy_ex(char *dst, char const *src) +{ + size_t ret = 0; + do { + *dst++ = *src; + ++ret; + } while(*src++); + return ret - 1; +} + +////////////////////////////////////////////////////////////////////////////// +void strrev(char *first, char *last) +{ + char tmp; + while(last > first) { + tmp = *first; + *first++ = *last; + *last-- = tmp; + } +} + +////////////////////////////////////////////////////////////////////////////// +char tochr(const uint8_t in, const uint8_t upper) +{ + return in + ((in < 10) ? '0' : (upper ? 'A' : 'a') - 10); +} + +////////////////////////////////////////////////////////////////////////////// +size_t uitodec(char* buffer, uint32_t data) +{ + char *b2 = buffer; + if(!data) { + *b2++ = '0'; + *b2 = '\0'; + return 1; + } + + while(data) { + *b2++ = (data % 10) + '0'; + data /= 10; + } + size_t ret = b2 - buffer; + + *b2-- = 0; + + strrev(buffer, b2); + return ret; +} + +////////////////////////////////////////////////////////////////////////////// +size_t uitohex(char* buffer, uint32_t data, uint8_t chars) +{ + char *b2 = buffer; + size_t ret = 0; + + if(chars == 0xff || !chars) + { + if(!data) { + *b2++ = '0'; + *b2 = '\0'; + return 1; + } + + while(data) { + uint8_t curval = data & 0x0f; + *b2++ = tochr(curval, 1); + data >>= 4; + } + ret = b2 - buffer; + + } + else + { + ret = chars; + for(uint8_t pos = 0; pos < (uint8_t)ret; ++pos) { + *b2++ = tochr(data & 0x0f, 1); + data >>= 4; + } + + } + *b2-- = 0; + strrev(buffer, b2); + return ret; +} + + +////////////////////////////////////////////////////////////////////////////// +size_t itodec(char* buffer, int data) +{ + if(data < 0) { + *buffer++ = '-'; + return uitodec(buffer, -data) + 1; + } + + return uitodec(buffer, data); +} + +////////////////////////////////////////////////////////////////////////////// +size_t itohex(char* buffer, int data) +{ + if(data < 0) { + *buffer++ = '-'; + return uitohex(buffer, -data, 0) + 1; + } + return uitohex(buffer, data, 0); +} diff --git a/components/f1ll/strutil.h b/components/f1ll/strutil.h new file mode 100644 index 0000000..49ddc39 --- /dev/null +++ b/components/f1ll/strutil.h @@ -0,0 +1,31 @@ +/* + * strutil.h + * + * Created on: Feb 11, 2017 + * Author: compi + */ + +#ifndef _STM32PLUS_STRUTIL_H_ +#define _STM32PLUS_STRUTIL_H_ + +#include +#include + +#ifdef __cplusplus +extern "C" { +#endif + +////////////////////////////////////////////////////////////////////////////// +size_t strcpy_ex(char *dst, char const *src); +size_t uitodec(char* buffer, uint32_t data); +size_t uitohex(char* buffer, uint32_t data, uint8_t chars); +size_t itodec(char* buffer, int data); +size_t itohex(char* buffer, int data); +void strrev(char *first, char *last); +char tochr(const uint8_t in, const uint8_t upper); + +#ifdef __cplusplus +} +#endif + +#endif /* _STM32PLUS_STRUTIL_H_ */ diff --git a/components/f1ll/usartcore.cpp b/components/f1ll/usartcore.cpp new file mode 100644 index 0000000..4386042 --- /dev/null +++ b/components/f1ll/usartcore.cpp @@ -0,0 +1,120 @@ +/* + * ll_dmadrivenusartcore.cpp + * + * Created on: Nov 4, 2019 + * Author: abody + */ + +#include "f1ll/usartcore.h" + +namespace f1ll { + +UsartCore::UsartCore(USART_TypeDef *usart, DMA_TypeDef *dma, uint32_t channelRx, uint32_t channelTx) +: m_usart(usart) +, m_rxDma(dma, channelRx) +, m_txDma(dma, channelTx) +{ + uint32_t status = usart->SR; + volatile uint32_t tmpreg = usart->DR; // clearing some of the error/status bits in the USART + (void) tmpreg; + (void) status; + + *m_txDma.GetIfcReg() = + m_txDma.GetGiMask(); + *m_rxDma.GetIfcReg() = + m_rxDma.GetGiMask(); + + LL_DMA_EnableIT_HT(dma, channelRx); + LL_DMA_EnableIT_TC(dma, channelRx); + LL_DMA_EnableIT_TE(dma, channelRx); + LL_DMA_EnableIT_HT(dma, channelTx); + LL_DMA_EnableIT_TC(dma, channelTx); + LL_DMA_EnableIT_TE(dma, channelTx); +} + + +void UsartCore::UsartIsr() +{ + uint32_t status = m_usart->SR; + volatile uint32_t tmpreg = m_usart->DR; // clearing some of the error/status bits in the HW + (void) tmpreg; + + if(LL_USART_IsEnabledIT_TC(m_usart) && LL_USART_IsActiveFlag_TC(m_usart)) { // transmission complete + LL_USART_DisableIT_TC(m_usart); + TransmissionComplete(); + } + if(LL_USART_IsEnabledIT_IDLE(m_usart) && (status & USART_SR_IDLE)) { + ReceiverIdle(); + } + if(LL_USART_IsEnabledIT_ERROR(m_usart)) { + if(status & USART_SR_FE) { + FramingError(); + } + if(status & USART_SR_ORE) { + Overrun(); + } + } +} + + +void UsartCore::RxDmaIsr() +{ + if(*m_rxDma.GetIsReg() & m_rxDma.GetTcMask()) { + *m_rxDma.GetIfcReg() = m_rxDma.GetTcMask(); + if(m_rxDma.IsEnabledIt_TC()) + RxDmaTransferComplete(); + } + if(*m_rxDma.GetIsReg() & m_rxDma.GetHtMask()) { + *m_rxDma.GetIfcReg() = m_rxDma.GetHtMask(); + if(m_rxDma.IsEnabledIt_HT()) + RxDmaHalfTransfer(); + } + if(*m_rxDma.GetIsReg() & m_rxDma.GetTeMask()) { + *m_rxDma.GetIfcReg() = m_rxDma.GetTeMask(); + if(m_rxDma.IsEnabledIt_TE()) + RxDmaError(); + } +} + + +void UsartCore::TxDmaIsr() +{ + if(*m_txDma.GetIsReg() & m_txDma.GetTcMask()) { // DMA transfer complete + *m_txDma.GetIfcReg() = m_txDma.GetTcMask(); + if(m_txDma.IsEnabledIt_TC()) + TxDmaTransferComplete(); + } + if(*m_txDma.GetIsReg() & m_txDma.GetHtMask()) { + *m_txDma.GetIfcReg() = m_txDma.GetHtMask(); + if(m_txDma.IsEnabledIt_HT()) + TxDmaHalfTransfer(); + } + if(*m_txDma.GetIsReg() & m_txDma.GetTeMask()) { + *m_txDma.GetIfcReg() = m_txDma.GetTeMask(); + if(m_txDma.IsEnabledIt_TE()) + TxDmaError(); + } +} + + +void UsartCore::SetupTransmit(void const *buffer, uint16_t length) +{ + LL_DMA_ConfigAddresses(m_txDma.GetDma(), m_txDma.GetChannel(), reinterpret_cast(buffer), + LL_USART_DMA_GetRegAddr(m_usart), LL_DMA_DIRECTION_MEMORY_TO_PERIPH); + LL_DMA_SetDataLength(m_txDma.GetDma(), m_txDma.GetChannel(), length); + LL_USART_EnableDMAReq_TX(m_usart); + LL_DMA_EnableChannel(m_txDma.GetDma(), m_txDma.GetChannel()); +} + + +void UsartCore::SetupReceive(void *buffer, uint16_t length) +{ + LL_DMA_ConfigAddresses(m_rxDma.GetDma(), m_rxDma.GetChannel(), LL_USART_DMA_GetRegAddr(m_usart), + reinterpret_cast(buffer), LL_DMA_DIRECTION_PERIPH_TO_MEMORY); + LL_DMA_SetDataLength(m_rxDma.GetDma(), m_rxDma.GetChannel(), length); + LL_USART_EnableDMAReq_RX(m_usart); + LL_USART_ClearFlag_ORE(m_usart); + LL_DMA_EnableChannel(m_rxDma.GetDma(), m_rxDma.GetChannel()); +} + +} /* namespace f4ll */ diff --git a/components/f1ll/usartcore.h b/components/f1ll/usartcore.h new file mode 100644 index 0000000..1cd88fa --- /dev/null +++ b/components/f1ll/usartcore.h @@ -0,0 +1,55 @@ +/* + * ll_dmadrivenusartcore.h + * + * Created on: Nov 4, 2019 + * Author: abody + */ + +#ifndef LL_USARTCORE_H_ +#define LL_USARTCORE_H_ +#include + +#include "f1ll/dmahelper.h" + +namespace f1ll { + +class UsartCore +{ +public: + static inline void HandleUsartIrq(UsartCore *_this) { _this->UsartIsr(); } + static inline void HandleRxDmaIrq(UsartCore *_this) { _this->RxDmaIsr(); } + static inline void HandleTxDmaIrq(UsartCore *_this) { _this->TxDmaIsr(); } + + void SetupTransmit(void const *buffer, uint16_t length); + void SetupReceive(void *buffer, uint16_t length); + +protected: + UsartCore(USART_TypeDef *usart, DMA_TypeDef *dma, uint32_t channelRx, uint32_t streamTx); + + USART_TypeDef *m_usart; + DmaHelper m_rxDma; + DmaHelper m_txDma; + +private: + virtual void ReceiverIdle(void) = 0; + virtual void TransmissionComplete(void) = 0; + virtual void FramingError(void) = 0; + virtual void Overrun(void) = 0; + + virtual void RxDmaTransferComplete(void) = 0; + virtual void RxDmaHalfTransfer(void) = 0; + virtual void RxDmaError(void) = 0; + + virtual void TxDmaTransferComplete(void) = 0; + virtual void TxDmaHalfTransfer(void) = 0; + virtual void TxDmaError(void) = 0; + + void UsartIsr(); + void RxDmaIsr(); + void TxDmaIsr(); + +}; + +} /* namespace f4ll */ + +#endif /* LL_USARTCORE_H_ */ diff --git a/platform/crc_ll.h b/platform/crc_ll.h new file mode 100644 index 0000000..f10b7bc --- /dev/null +++ b/platform/crc_ll.h @@ -0,0 +1,6 @@ +#ifndef __PLATFORM_CRC_LL_H_INCLUDED +#define __PLATFORM_CRC_LL_H_INCLUDED + +#include "crc.h" + +#endif // __PLATFORM_CRC_LL_H_INCLUDED diff --git a/platform/dma_ll.h b/platform/dma_ll.h new file mode 100644 index 0000000..23feb1d --- /dev/null +++ b/platform/dma_ll.h @@ -0,0 +1,6 @@ +#ifndef __PLATFORM_DMA_LL_H_INCLUDED +#define __PLATFORM_DMA_LL_H_INCLUDED + +#include "stm32f1xx_ll_dma.h" + +#endif // __PLATFORM_DMA_LL_H_INCLUDED diff --git a/platform/usart_ll.h b/platform/usart_ll.h new file mode 100644 index 0000000..1655e65 --- /dev/null +++ b/platform/usart_ll.h @@ -0,0 +1,6 @@ +#ifndef __PLATFORM_USART_LL_H_INCLUDED +#define __PLATFORM_USART_LL_H_INCLUDED + +#include + +#endif // __PLATFORM_USART_LL_H_INCLUDED