Migrated (does not build)
This commit is contained in:
parent
549d4f3403
commit
1382dda88e
GPG key ID:
BD0C6214E68FB5CF
108 changed files with 126364 additions and 111432 deletions
File diff suppressed because it is too large
Load diff
|
|
@ -1,286 +1,297 @@
|
|||
/**
|
||||
******************************************************************************
|
||||
* @file stm32f4xx_hal.h
|
||||
* @author MCD Application Team
|
||||
* @brief This file contains all the functions prototypes for the HAL
|
||||
* module driver.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* <h2><center>© Copyright (c) 2017 STMicroelectronics.
|
||||
* All rights reserved.</center></h2>
|
||||
*
|
||||
* This software component is licensed by ST under BSD 3-Clause license,
|
||||
* the "License"; You may not use this file except in compliance with the
|
||||
* License. You may obtain a copy of the License at:
|
||||
* opensource.org/licenses/BSD-3-Clause
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef __STM32F4xx_HAL_H
|
||||
#define __STM32F4xx_HAL_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "stm32f4xx_hal_conf.h"
|
||||
|
||||
/** @addtogroup STM32F4xx_HAL_Driver
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup HAL
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* Exported types ------------------------------------------------------------*/
|
||||
/* Exported constants --------------------------------------------------------*/
|
||||
|
||||
/** @defgroup HAL_Exported_Constants HAL Exported Constants
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup HAL_TICK_FREQ Tick Frequency
|
||||
* @{
|
||||
*/
|
||||
typedef enum
|
||||
{
|
||||
HAL_TICK_FREQ_10HZ = 100U,
|
||||
HAL_TICK_FREQ_100HZ = 10U,
|
||||
HAL_TICK_FREQ_1KHZ = 1U,
|
||||
HAL_TICK_FREQ_DEFAULT = HAL_TICK_FREQ_1KHZ
|
||||
} HAL_TickFreqTypeDef;
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported macro ------------------------------------------------------------*/
|
||||
/** @defgroup HAL_Exported_Macros HAL Exported Macros
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @brief Freeze/Unfreeze Peripherals in Debug mode
|
||||
*/
|
||||
#define __HAL_DBGMCU_FREEZE_TIM2() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM2_STOP))
|
||||
#define __HAL_DBGMCU_FREEZE_TIM3() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM3_STOP))
|
||||
#define __HAL_DBGMCU_FREEZE_TIM4() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM4_STOP))
|
||||
#define __HAL_DBGMCU_FREEZE_TIM5() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM5_STOP))
|
||||
#define __HAL_DBGMCU_FREEZE_TIM6() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM6_STOP))
|
||||
#define __HAL_DBGMCU_FREEZE_TIM7() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM7_STOP))
|
||||
#define __HAL_DBGMCU_FREEZE_TIM12() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM12_STOP))
|
||||
#define __HAL_DBGMCU_FREEZE_TIM13() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM13_STOP))
|
||||
#define __HAL_DBGMCU_FREEZE_TIM14() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM14_STOP))
|
||||
#define __HAL_DBGMCU_FREEZE_RTC() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_RTC_STOP))
|
||||
#define __HAL_DBGMCU_FREEZE_WWDG() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_WWDG_STOP))
|
||||
#define __HAL_DBGMCU_FREEZE_IWDG() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_IWDG_STOP))
|
||||
#define __HAL_DBGMCU_FREEZE_I2C1_TIMEOUT() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_I2C1_SMBUS_TIMEOUT))
|
||||
#define __HAL_DBGMCU_FREEZE_I2C2_TIMEOUT() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_I2C2_SMBUS_TIMEOUT))
|
||||
#define __HAL_DBGMCU_FREEZE_I2C3_TIMEOUT() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_I2C3_SMBUS_TIMEOUT))
|
||||
#define __HAL_DBGMCU_FREEZE_CAN1() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_CAN1_STOP))
|
||||
#define __HAL_DBGMCU_FREEZE_CAN2() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_CAN2_STOP))
|
||||
#define __HAL_DBGMCU_FREEZE_TIM1() (DBGMCU->APB2FZ |= (DBGMCU_APB2_FZ_DBG_TIM1_STOP))
|
||||
#define __HAL_DBGMCU_FREEZE_TIM8() (DBGMCU->APB2FZ |= (DBGMCU_APB2_FZ_DBG_TIM8_STOP))
|
||||
#define __HAL_DBGMCU_FREEZE_TIM9() (DBGMCU->APB2FZ |= (DBGMCU_APB2_FZ_DBG_TIM9_STOP))
|
||||
#define __HAL_DBGMCU_FREEZE_TIM10() (DBGMCU->APB2FZ |= (DBGMCU_APB2_FZ_DBG_TIM10_STOP))
|
||||
#define __HAL_DBGMCU_FREEZE_TIM11() (DBGMCU->APB2FZ |= (DBGMCU_APB2_FZ_DBG_TIM11_STOP))
|
||||
|
||||
#define __HAL_DBGMCU_UNFREEZE_TIM2() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM2_STOP))
|
||||
#define __HAL_DBGMCU_UNFREEZE_TIM3() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM3_STOP))
|
||||
#define __HAL_DBGMCU_UNFREEZE_TIM4() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM4_STOP))
|
||||
#define __HAL_DBGMCU_UNFREEZE_TIM5() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM5_STOP))
|
||||
#define __HAL_DBGMCU_UNFREEZE_TIM6() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM6_STOP))
|
||||
#define __HAL_DBGMCU_UNFREEZE_TIM7() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM7_STOP))
|
||||
#define __HAL_DBGMCU_UNFREEZE_TIM12() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM12_STOP))
|
||||
#define __HAL_DBGMCU_UNFREEZE_TIM13() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM13_STOP))
|
||||
#define __HAL_DBGMCU_UNFREEZE_TIM14() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM14_STOP))
|
||||
#define __HAL_DBGMCU_UNFREEZE_RTC() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_RTC_STOP))
|
||||
#define __HAL_DBGMCU_UNFREEZE_WWDG() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_WWDG_STOP))
|
||||
#define __HAL_DBGMCU_UNFREEZE_IWDG() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_IWDG_STOP))
|
||||
#define __HAL_DBGMCU_UNFREEZE_I2C1_TIMEOUT() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_I2C1_SMBUS_TIMEOUT))
|
||||
#define __HAL_DBGMCU_UNFREEZE_I2C2_TIMEOUT() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_I2C2_SMBUS_TIMEOUT))
|
||||
#define __HAL_DBGMCU_UNFREEZE_I2C3_TIMEOUT() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_I2C3_SMBUS_TIMEOUT))
|
||||
#define __HAL_DBGMCU_UNFREEZE_CAN1() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_CAN1_STOP))
|
||||
#define __HAL_DBGMCU_UNFREEZE_CAN2() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_CAN2_STOP))
|
||||
#define __HAL_DBGMCU_UNFREEZE_TIM1() (DBGMCU->APB2FZ &= ~(DBGMCU_APB2_FZ_DBG_TIM1_STOP))
|
||||
#define __HAL_DBGMCU_UNFREEZE_TIM8() (DBGMCU->APB2FZ &= ~(DBGMCU_APB2_FZ_DBG_TIM8_STOP))
|
||||
#define __HAL_DBGMCU_UNFREEZE_TIM9() (DBGMCU->APB2FZ &= ~(DBGMCU_APB2_FZ_DBG_TIM9_STOP))
|
||||
#define __HAL_DBGMCU_UNFREEZE_TIM10() (DBGMCU->APB2FZ &= ~(DBGMCU_APB2_FZ_DBG_TIM10_STOP))
|
||||
#define __HAL_DBGMCU_UNFREEZE_TIM11() (DBGMCU->APB2FZ &= ~(DBGMCU_APB2_FZ_DBG_TIM11_STOP))
|
||||
|
||||
/** @brief Main Flash memory mapped at 0x00000000
|
||||
*/
|
||||
#define __HAL_SYSCFG_REMAPMEMORY_FLASH() (SYSCFG->MEMRMP &= ~(SYSCFG_MEMRMP_MEM_MODE))
|
||||
|
||||
/** @brief System Flash memory mapped at 0x00000000
|
||||
*/
|
||||
#define __HAL_SYSCFG_REMAPMEMORY_SYSTEMFLASH() do {SYSCFG->MEMRMP &= ~(SYSCFG_MEMRMP_MEM_MODE);\
|
||||
SYSCFG->MEMRMP |= SYSCFG_MEMRMP_MEM_MODE_0;\
|
||||
}while(0);
|
||||
|
||||
/** @brief Embedded SRAM mapped at 0x00000000
|
||||
*/
|
||||
#define __HAL_SYSCFG_REMAPMEMORY_SRAM() do {SYSCFG->MEMRMP &= ~(SYSCFG_MEMRMP_MEM_MODE);\
|
||||
SYSCFG->MEMRMP |= (SYSCFG_MEMRMP_MEM_MODE_0 | SYSCFG_MEMRMP_MEM_MODE_1);\
|
||||
}while(0);
|
||||
|
||||
#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx)|| defined(STM32F417xx)
|
||||
/** @brief FSMC Bank1 (NOR/PSRAM 1 and 2) mapped at 0x00000000
|
||||
*/
|
||||
#define __HAL_SYSCFG_REMAPMEMORY_FSMC() do {SYSCFG->MEMRMP &= ~(SYSCFG_MEMRMP_MEM_MODE);\
|
||||
SYSCFG->MEMRMP |= (SYSCFG_MEMRMP_MEM_MODE_1);\
|
||||
}while(0);
|
||||
#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx */
|
||||
|
||||
#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx) ||\
|
||||
defined(STM32F469xx) || defined(STM32F479xx)
|
||||
/** @brief FMC Bank1 (NOR/PSRAM 1 and 2) mapped at 0x00000000
|
||||
*/
|
||||
#define __HAL_SYSCFG_REMAPMEMORY_FMC() do {SYSCFG->MEMRMP &= ~(SYSCFG_MEMRMP_MEM_MODE);\
|
||||
SYSCFG->MEMRMP |= (SYSCFG_MEMRMP_MEM_MODE_1);\
|
||||
}while(0);
|
||||
|
||||
/** @brief FMC/SDRAM Bank 1 and 2 mapped at 0x00000000
|
||||
*/
|
||||
#define __HAL_SYSCFG_REMAPMEMORY_FMC_SDRAM() do {SYSCFG->MEMRMP &= ~(SYSCFG_MEMRMP_MEM_MODE);\
|
||||
SYSCFG->MEMRMP |= (SYSCFG_MEMRMP_MEM_MODE_2);\
|
||||
}while(0);
|
||||
#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx */
|
||||
|
||||
#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) || defined(STM32F413xx) || defined(STM32F423xx)
|
||||
/** @defgroup Cortex_Lockup_Enable Cortex Lockup Enable
|
||||
* @{
|
||||
*/
|
||||
/** @brief SYSCFG Break Lockup lock
|
||||
* Enables and locks the connection of Cortex-M4 LOCKUP (Hardfault) output to TIM1/8 input
|
||||
* @note The selected configuration is locked and can be unlocked by system reset
|
||||
*/
|
||||
#define __HAL_SYSCFG_BREAK_PVD_LOCK() do {SYSCFG->CFGR2 &= ~(SYSCFG_CFGR2_PVD_LOCK); \
|
||||
SYSCFG->CFGR2 |= SYSCFG_CFGR2_PVD_LOCK; \
|
||||
}while(0)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup PVD_Lock_Enable PVD Lock
|
||||
* @{
|
||||
*/
|
||||
/** @brief SYSCFG Break PVD lock
|
||||
* Enables and locks the PVD connection with Timer1/8 Break Input, , as well as the PVDE and PLS[2:0] in the PWR_CR register
|
||||
* @note The selected configuration is locked and can be unlocked by system reset
|
||||
*/
|
||||
#define __HAL_SYSCFG_BREAK_LOCKUP_LOCK() do {SYSCFG->CFGR2 &= ~(SYSCFG_CFGR2_LOCKUP_LOCK); \
|
||||
SYSCFG->CFGR2 |= SYSCFG_CFGR2_LOCKUP_LOCK; \
|
||||
}while(0)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
#endif /* STM32F410Tx || STM32F410Cx || STM32F410Rx || STM32F413xx || STM32F423xx */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup HAL_Private_Macros HAL Private Macros
|
||||
* @{
|
||||
*/
|
||||
#define IS_TICKFREQ(FREQ) (((FREQ) == HAL_TICK_FREQ_10HZ) || \
|
||||
((FREQ) == HAL_TICK_FREQ_100HZ) || \
|
||||
((FREQ) == HAL_TICK_FREQ_1KHZ))
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported functions --------------------------------------------------------*/
|
||||
/** @addtogroup HAL_Exported_Functions
|
||||
* @{
|
||||
*/
|
||||
/** @addtogroup HAL_Exported_Functions_Group1
|
||||
* @{
|
||||
*/
|
||||
/* Initialization and Configuration functions ******************************/
|
||||
HAL_StatusTypeDef HAL_Init(void);
|
||||
HAL_StatusTypeDef HAL_DeInit(void);
|
||||
void HAL_MspInit(void);
|
||||
void HAL_MspDeInit(void);
|
||||
HAL_StatusTypeDef HAL_InitTick (uint32_t TickPriority);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup HAL_Exported_Functions_Group2
|
||||
* @{
|
||||
*/
|
||||
/* Peripheral Control functions ************************************************/
|
||||
void HAL_IncTick(void);
|
||||
void HAL_Delay(uint32_t Delay);
|
||||
uint32_t HAL_GetTick(void);
|
||||
uint32_t HAL_GetTickPrio(void);
|
||||
HAL_StatusTypeDef HAL_SetTickFreq(HAL_TickFreqTypeDef Freq);
|
||||
HAL_TickFreqTypeDef HAL_GetTickFreq(void);
|
||||
void HAL_SuspendTick(void);
|
||||
void HAL_ResumeTick(void);
|
||||
uint32_t HAL_GetHalVersion(void);
|
||||
uint32_t HAL_GetREVID(void);
|
||||
uint32_t HAL_GetDEVID(void);
|
||||
void HAL_DBGMCU_EnableDBGSleepMode(void);
|
||||
void HAL_DBGMCU_DisableDBGSleepMode(void);
|
||||
void HAL_DBGMCU_EnableDBGStopMode(void);
|
||||
void HAL_DBGMCU_DisableDBGStopMode(void);
|
||||
void HAL_DBGMCU_EnableDBGStandbyMode(void);
|
||||
void HAL_DBGMCU_DisableDBGStandbyMode(void);
|
||||
void HAL_EnableCompensationCell(void);
|
||||
void HAL_DisableCompensationCell(void);
|
||||
uint32_t HAL_GetUIDw0(void);
|
||||
uint32_t HAL_GetUIDw1(void);
|
||||
uint32_t HAL_GetUIDw2(void);
|
||||
#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx) ||\
|
||||
defined(STM32F469xx) || defined(STM32F479xx)
|
||||
void HAL_EnableMemorySwappingBank(void);
|
||||
void HAL_DisableMemorySwappingBank(void);
|
||||
#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
/* Private types -------------------------------------------------------------*/
|
||||
/* Private variables ---------------------------------------------------------*/
|
||||
/** @defgroup HAL_Private_Variables HAL Private Variables
|
||||
* @{
|
||||
*/
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
/* Private constants ---------------------------------------------------------*/
|
||||
/** @defgroup HAL_Private_Constants HAL Private Constants
|
||||
* @{
|
||||
*/
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
/* Private macros ------------------------------------------------------------*/
|
||||
/* Private functions ---------------------------------------------------------*/
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* __STM32F4xx_HAL_H */
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file stm32f4xx_hal.h
|
||||
* @author MCD Application Team
|
||||
* @brief This file contains all the functions prototypes for the HAL
|
||||
* module driver.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* Copyright (c) 2017 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software is licensed under terms that can be found in the LICENSE file
|
||||
* in the root directory of this software component.
|
||||
* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef __STM32F4xx_HAL_H
|
||||
#define __STM32F4xx_HAL_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "stm32f4xx_hal_conf.h"
|
||||
|
||||
/** @addtogroup STM32F4xx_HAL_Driver
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup HAL
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* Exported types ------------------------------------------------------------*/
|
||||
/* Exported constants --------------------------------------------------------*/
|
||||
|
||||
/** @defgroup HAL_Exported_Constants HAL Exported Constants
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup HAL_TICK_FREQ Tick Frequency
|
||||
* @{
|
||||
*/
|
||||
typedef enum
|
||||
{
|
||||
HAL_TICK_FREQ_10HZ = 100U,
|
||||
HAL_TICK_FREQ_100HZ = 10U,
|
||||
HAL_TICK_FREQ_1KHZ = 1U,
|
||||
HAL_TICK_FREQ_DEFAULT = HAL_TICK_FREQ_1KHZ
|
||||
} HAL_TickFreqTypeDef;
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported macro ------------------------------------------------------------*/
|
||||
/** @defgroup HAL_Exported_Macros HAL Exported Macros
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @brief Freeze/Unfreeze Peripherals in Debug mode
|
||||
*/
|
||||
#define __HAL_DBGMCU_FREEZE_TIM2() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM2_STOP))
|
||||
#define __HAL_DBGMCU_FREEZE_TIM3() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM3_STOP))
|
||||
#define __HAL_DBGMCU_FREEZE_TIM4() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM4_STOP))
|
||||
#define __HAL_DBGMCU_FREEZE_TIM5() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM5_STOP))
|
||||
#define __HAL_DBGMCU_FREEZE_TIM6() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM6_STOP))
|
||||
#define __HAL_DBGMCU_FREEZE_TIM7() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM7_STOP))
|
||||
#define __HAL_DBGMCU_FREEZE_TIM12() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM12_STOP))
|
||||
#define __HAL_DBGMCU_FREEZE_TIM13() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM13_STOP))
|
||||
#define __HAL_DBGMCU_FREEZE_TIM14() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM14_STOP))
|
||||
#define __HAL_DBGMCU_FREEZE_RTC() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_RTC_STOP))
|
||||
#define __HAL_DBGMCU_FREEZE_WWDG() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_WWDG_STOP))
|
||||
#define __HAL_DBGMCU_FREEZE_IWDG() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_IWDG_STOP))
|
||||
#define __HAL_DBGMCU_FREEZE_I2C1_TIMEOUT() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_I2C1_SMBUS_TIMEOUT))
|
||||
#define __HAL_DBGMCU_FREEZE_I2C2_TIMEOUT() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_I2C2_SMBUS_TIMEOUT))
|
||||
#define __HAL_DBGMCU_FREEZE_I2C3_TIMEOUT() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_I2C3_SMBUS_TIMEOUT))
|
||||
#define __HAL_DBGMCU_FREEZE_CAN1() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_CAN1_STOP))
|
||||
#define __HAL_DBGMCU_FREEZE_CAN2() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_CAN2_STOP))
|
||||
#define __HAL_DBGMCU_FREEZE_TIM1() (DBGMCU->APB2FZ |= (DBGMCU_APB2_FZ_DBG_TIM1_STOP))
|
||||
#define __HAL_DBGMCU_FREEZE_TIM8() (DBGMCU->APB2FZ |= (DBGMCU_APB2_FZ_DBG_TIM8_STOP))
|
||||
#define __HAL_DBGMCU_FREEZE_TIM9() (DBGMCU->APB2FZ |= (DBGMCU_APB2_FZ_DBG_TIM9_STOP))
|
||||
#define __HAL_DBGMCU_FREEZE_TIM10() (DBGMCU->APB2FZ |= (DBGMCU_APB2_FZ_DBG_TIM10_STOP))
|
||||
#define __HAL_DBGMCU_FREEZE_TIM11() (DBGMCU->APB2FZ |= (DBGMCU_APB2_FZ_DBG_TIM11_STOP))
|
||||
|
||||
#define __HAL_DBGMCU_UNFREEZE_TIM2() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM2_STOP))
|
||||
#define __HAL_DBGMCU_UNFREEZE_TIM3() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM3_STOP))
|
||||
#define __HAL_DBGMCU_UNFREEZE_TIM4() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM4_STOP))
|
||||
#define __HAL_DBGMCU_UNFREEZE_TIM5() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM5_STOP))
|
||||
#define __HAL_DBGMCU_UNFREEZE_TIM6() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM6_STOP))
|
||||
#define __HAL_DBGMCU_UNFREEZE_TIM7() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM7_STOP))
|
||||
#define __HAL_DBGMCU_UNFREEZE_TIM12() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM12_STOP))
|
||||
#define __HAL_DBGMCU_UNFREEZE_TIM13() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM13_STOP))
|
||||
#define __HAL_DBGMCU_UNFREEZE_TIM14() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM14_STOP))
|
||||
#define __HAL_DBGMCU_UNFREEZE_RTC() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_RTC_STOP))
|
||||
#define __HAL_DBGMCU_UNFREEZE_WWDG() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_WWDG_STOP))
|
||||
#define __HAL_DBGMCU_UNFREEZE_IWDG() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_IWDG_STOP))
|
||||
#define __HAL_DBGMCU_UNFREEZE_I2C1_TIMEOUT() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_I2C1_SMBUS_TIMEOUT))
|
||||
#define __HAL_DBGMCU_UNFREEZE_I2C2_TIMEOUT() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_I2C2_SMBUS_TIMEOUT))
|
||||
#define __HAL_DBGMCU_UNFREEZE_I2C3_TIMEOUT() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_I2C3_SMBUS_TIMEOUT))
|
||||
#define __HAL_DBGMCU_UNFREEZE_CAN1() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_CAN1_STOP))
|
||||
#define __HAL_DBGMCU_UNFREEZE_CAN2() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_CAN2_STOP))
|
||||
#define __HAL_DBGMCU_UNFREEZE_TIM1() (DBGMCU->APB2FZ &= ~(DBGMCU_APB2_FZ_DBG_TIM1_STOP))
|
||||
#define __HAL_DBGMCU_UNFREEZE_TIM8() (DBGMCU->APB2FZ &= ~(DBGMCU_APB2_FZ_DBG_TIM8_STOP))
|
||||
#define __HAL_DBGMCU_UNFREEZE_TIM9() (DBGMCU->APB2FZ &= ~(DBGMCU_APB2_FZ_DBG_TIM9_STOP))
|
||||
#define __HAL_DBGMCU_UNFREEZE_TIM10() (DBGMCU->APB2FZ &= ~(DBGMCU_APB2_FZ_DBG_TIM10_STOP))
|
||||
#define __HAL_DBGMCU_UNFREEZE_TIM11() (DBGMCU->APB2FZ &= ~(DBGMCU_APB2_FZ_DBG_TIM11_STOP))
|
||||
|
||||
/** @brief Main Flash memory mapped at 0x00000000
|
||||
*/
|
||||
#define __HAL_SYSCFG_REMAPMEMORY_FLASH() (SYSCFG->MEMRMP &= ~(SYSCFG_MEMRMP_MEM_MODE))
|
||||
|
||||
/** @brief System Flash memory mapped at 0x00000000
|
||||
*/
|
||||
#define __HAL_SYSCFG_REMAPMEMORY_SYSTEMFLASH() do {SYSCFG->MEMRMP &= ~(SYSCFG_MEMRMP_MEM_MODE);\
|
||||
SYSCFG->MEMRMP |= SYSCFG_MEMRMP_MEM_MODE_0;\
|
||||
}while(0);
|
||||
|
||||
/** @brief Embedded SRAM mapped at 0x00000000
|
||||
*/
|
||||
#define __HAL_SYSCFG_REMAPMEMORY_SRAM() do {SYSCFG->MEMRMP &= ~(SYSCFG_MEMRMP_MEM_MODE);\
|
||||
SYSCFG->MEMRMP |= (SYSCFG_MEMRMP_MEM_MODE_0 | SYSCFG_MEMRMP_MEM_MODE_1);\
|
||||
}while(0);
|
||||
|
||||
#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx)|| defined(STM32F417xx)
|
||||
/** @brief FSMC Bank1 (NOR/PSRAM 1 and 2) mapped at 0x00000000
|
||||
*/
|
||||
#define __HAL_SYSCFG_REMAPMEMORY_FSMC() do {SYSCFG->MEMRMP &= ~(SYSCFG_MEMRMP_MEM_MODE);\
|
||||
SYSCFG->MEMRMP |= (SYSCFG_MEMRMP_MEM_MODE_1);\
|
||||
}while(0);
|
||||
#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx */
|
||||
|
||||
#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx) ||\
|
||||
defined(STM32F469xx) || defined(STM32F479xx)
|
||||
/** @brief FMC Bank1 (NOR/PSRAM 1 and 2) mapped at 0x00000000
|
||||
*/
|
||||
#define __HAL_SYSCFG_REMAPMEMORY_FMC() do {SYSCFG->MEMRMP &= ~(SYSCFG_MEMRMP_MEM_MODE);\
|
||||
SYSCFG->MEMRMP |= (SYSCFG_MEMRMP_MEM_MODE_1);\
|
||||
}while(0);
|
||||
|
||||
/** @brief FMC/SDRAM Bank 1 and 2 mapped at 0x00000000
|
||||
*/
|
||||
#define __HAL_SYSCFG_REMAPMEMORY_FMC_SDRAM() do {SYSCFG->MEMRMP &= ~(SYSCFG_MEMRMP_MEM_MODE);\
|
||||
SYSCFG->MEMRMP |= (SYSCFG_MEMRMP_MEM_MODE_2);\
|
||||
}while(0);
|
||||
#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx */
|
||||
|
||||
#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) || defined(STM32F413xx) || defined(STM32F423xx)
|
||||
/** @defgroup Cortex_Lockup_Enable Cortex Lockup Enable
|
||||
* @{
|
||||
*/
|
||||
/** @brief SYSCFG Break Lockup lock
|
||||
* Enables and locks the connection of Cortex-M4 LOCKUP (Hardfault) output to TIM1/8 input
|
||||
* @note The selected configuration is locked and can be unlocked by system reset
|
||||
*/
|
||||
#define __HAL_SYSCFG_BREAK_PVD_LOCK() do {SYSCFG->CFGR2 &= ~(SYSCFG_CFGR2_PVD_LOCK); \
|
||||
SYSCFG->CFGR2 |= SYSCFG_CFGR2_PVD_LOCK; \
|
||||
}while(0)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup PVD_Lock_Enable PVD Lock
|
||||
* @{
|
||||
*/
|
||||
/** @brief SYSCFG Break PVD lock
|
||||
* Enables and locks the PVD connection with Timer1/8 Break Input, , as well as the PVDE and PLS[2:0] in the PWR_CR register
|
||||
* @note The selected configuration is locked and can be unlocked by system reset
|
||||
*/
|
||||
#define __HAL_SYSCFG_BREAK_LOCKUP_LOCK() do {SYSCFG->CFGR2 &= ~(SYSCFG_CFGR2_LOCKUP_LOCK); \
|
||||
SYSCFG->CFGR2 |= SYSCFG_CFGR2_LOCKUP_LOCK; \
|
||||
}while(0)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
#endif /* STM32F410Tx || STM32F410Cx || STM32F410Rx || STM32F413xx || STM32F423xx */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup HAL_Private_Macros HAL Private Macros
|
||||
* @{
|
||||
*/
|
||||
#define IS_TICKFREQ(FREQ) (((FREQ) == HAL_TICK_FREQ_10HZ) || \
|
||||
((FREQ) == HAL_TICK_FREQ_100HZ) || \
|
||||
((FREQ) == HAL_TICK_FREQ_1KHZ))
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported variables --------------------------------------------------------*/
|
||||
|
||||
/** @addtogroup HAL_Exported_Variables
|
||||
* @{
|
||||
*/
|
||||
extern __IO uint32_t uwTick;
|
||||
extern uint32_t uwTickPrio;
|
||||
extern HAL_TickFreqTypeDef uwTickFreq;
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported functions --------------------------------------------------------*/
|
||||
/** @addtogroup HAL_Exported_Functions
|
||||
* @{
|
||||
*/
|
||||
/** @addtogroup HAL_Exported_Functions_Group1
|
||||
* @{
|
||||
*/
|
||||
/* Initialization and Configuration functions ******************************/
|
||||
HAL_StatusTypeDef HAL_Init(void);
|
||||
HAL_StatusTypeDef HAL_DeInit(void);
|
||||
void HAL_MspInit(void);
|
||||
void HAL_MspDeInit(void);
|
||||
HAL_StatusTypeDef HAL_InitTick (uint32_t TickPriority);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup HAL_Exported_Functions_Group2
|
||||
* @{
|
||||
*/
|
||||
/* Peripheral Control functions ************************************************/
|
||||
void HAL_IncTick(void);
|
||||
void HAL_Delay(uint32_t Delay);
|
||||
uint32_t HAL_GetTick(void);
|
||||
uint32_t HAL_GetTickPrio(void);
|
||||
HAL_StatusTypeDef HAL_SetTickFreq(HAL_TickFreqTypeDef Freq);
|
||||
HAL_TickFreqTypeDef HAL_GetTickFreq(void);
|
||||
void HAL_SuspendTick(void);
|
||||
void HAL_ResumeTick(void);
|
||||
uint32_t HAL_GetHalVersion(void);
|
||||
uint32_t HAL_GetREVID(void);
|
||||
uint32_t HAL_GetDEVID(void);
|
||||
void HAL_DBGMCU_EnableDBGSleepMode(void);
|
||||
void HAL_DBGMCU_DisableDBGSleepMode(void);
|
||||
void HAL_DBGMCU_EnableDBGStopMode(void);
|
||||
void HAL_DBGMCU_DisableDBGStopMode(void);
|
||||
void HAL_DBGMCU_EnableDBGStandbyMode(void);
|
||||
void HAL_DBGMCU_DisableDBGStandbyMode(void);
|
||||
void HAL_EnableCompensationCell(void);
|
||||
void HAL_DisableCompensationCell(void);
|
||||
uint32_t HAL_GetUIDw0(void);
|
||||
uint32_t HAL_GetUIDw1(void);
|
||||
uint32_t HAL_GetUIDw2(void);
|
||||
#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx) ||\
|
||||
defined(STM32F469xx) || defined(STM32F479xx)
|
||||
void HAL_EnableMemorySwappingBank(void);
|
||||
void HAL_DisableMemorySwappingBank(void);
|
||||
#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
/* Private types -------------------------------------------------------------*/
|
||||
/* Private variables ---------------------------------------------------------*/
|
||||
/** @defgroup HAL_Private_Variables HAL Private Variables
|
||||
* @{
|
||||
*/
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
/* Private constants ---------------------------------------------------------*/
|
||||
/** @defgroup HAL_Private_Constants HAL Private Constants
|
||||
* @{
|
||||
*/
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
/* Private macros ------------------------------------------------------------*/
|
||||
/* Private functions ---------------------------------------------------------*/
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* __STM32F4xx_HAL_H */
|
||||
|
||||
|
||||
|
|
|
|||
|
|
@ -1,410 +1,410 @@
|
|||
/**
|
||||
******************************************************************************
|
||||
* @file stm32f4xx_hal_cortex.h
|
||||
* @author MCD Application Team
|
||||
* @brief Header file of CORTEX HAL module.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* <h2><center>© Copyright (c) 2017 STMicroelectronics.
|
||||
* All rights reserved.</center></h2>
|
||||
*
|
||||
* This software component is licensed by ST under BSD 3-Clause license,
|
||||
* the "License"; You may not use this file except in compliance with the
|
||||
* License. You may obtain a copy of the License at:
|
||||
* opensource.org/licenses/BSD-3-Clause
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef __STM32F4xx_HAL_CORTEX_H
|
||||
#define __STM32F4xx_HAL_CORTEX_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "stm32f4xx_hal_def.h"
|
||||
|
||||
/** @addtogroup STM32F4xx_HAL_Driver
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup CORTEX
|
||||
* @{
|
||||
*/
|
||||
/* Exported types ------------------------------------------------------------*/
|
||||
/** @defgroup CORTEX_Exported_Types Cortex Exported Types
|
||||
* @{
|
||||
*/
|
||||
|
||||
#if (__MPU_PRESENT == 1U)
|
||||
/** @defgroup CORTEX_MPU_Region_Initialization_Structure_definition MPU Region Initialization Structure Definition
|
||||
* @brief MPU Region initialization structure
|
||||
* @{
|
||||
*/
|
||||
typedef struct
|
||||
{
|
||||
uint8_t Enable; /*!< Specifies the status of the region.
|
||||
This parameter can be a value of @ref CORTEX_MPU_Region_Enable */
|
||||
uint8_t Number; /*!< Specifies the number of the region to protect.
|
||||
This parameter can be a value of @ref CORTEX_MPU_Region_Number */
|
||||
uint32_t BaseAddress; /*!< Specifies the base address of the region to protect. */
|
||||
uint8_t Size; /*!< Specifies the size of the region to protect.
|
||||
This parameter can be a value of @ref CORTEX_MPU_Region_Size */
|
||||
uint8_t SubRegionDisable; /*!< Specifies the number of the subregion protection to disable.
|
||||
This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF */
|
||||
uint8_t TypeExtField; /*!< Specifies the TEX field level.
|
||||
This parameter can be a value of @ref CORTEX_MPU_TEX_Levels */
|
||||
uint8_t AccessPermission; /*!< Specifies the region access permission type.
|
||||
This parameter can be a value of @ref CORTEX_MPU_Region_Permission_Attributes */
|
||||
uint8_t DisableExec; /*!< Specifies the instruction access status.
|
||||
This parameter can be a value of @ref CORTEX_MPU_Instruction_Access */
|
||||
uint8_t IsShareable; /*!< Specifies the shareability status of the protected region.
|
||||
This parameter can be a value of @ref CORTEX_MPU_Access_Shareable */
|
||||
uint8_t IsCacheable; /*!< Specifies the cacheable status of the region protected.
|
||||
This parameter can be a value of @ref CORTEX_MPU_Access_Cacheable */
|
||||
uint8_t IsBufferable; /*!< Specifies the bufferable status of the protected region.
|
||||
This parameter can be a value of @ref CORTEX_MPU_Access_Bufferable */
|
||||
}MPU_Region_InitTypeDef;
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
#endif /* __MPU_PRESENT */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported constants --------------------------------------------------------*/
|
||||
|
||||
/** @defgroup CORTEX_Exported_Constants CORTEX Exported Constants
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup CORTEX_Preemption_Priority_Group CORTEX Preemption Priority Group
|
||||
* @{
|
||||
*/
|
||||
#define NVIC_PRIORITYGROUP_0 0x00000007U /*!< 0 bits for pre-emption priority
|
||||
4 bits for subpriority */
|
||||
#define NVIC_PRIORITYGROUP_1 0x00000006U /*!< 1 bits for pre-emption priority
|
||||
3 bits for subpriority */
|
||||
#define NVIC_PRIORITYGROUP_2 0x00000005U /*!< 2 bits for pre-emption priority
|
||||
2 bits for subpriority */
|
||||
#define NVIC_PRIORITYGROUP_3 0x00000004U /*!< 3 bits for pre-emption priority
|
||||
1 bits for subpriority */
|
||||
#define NVIC_PRIORITYGROUP_4 0x00000003U /*!< 4 bits for pre-emption priority
|
||||
0 bits for subpriority */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup CORTEX_SysTick_clock_source CORTEX _SysTick clock source
|
||||
* @{
|
||||
*/
|
||||
#define SYSTICK_CLKSOURCE_HCLK_DIV8 0x00000000U
|
||||
#define SYSTICK_CLKSOURCE_HCLK 0x00000004U
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#if (__MPU_PRESENT == 1)
|
||||
/** @defgroup CORTEX_MPU_HFNMI_PRIVDEF_Control MPU HFNMI and PRIVILEGED Access control
|
||||
* @{
|
||||
*/
|
||||
#define MPU_HFNMI_PRIVDEF_NONE 0x00000000U
|
||||
#define MPU_HARDFAULT_NMI MPU_CTRL_HFNMIENA_Msk
|
||||
#define MPU_PRIVILEGED_DEFAULT MPU_CTRL_PRIVDEFENA_Msk
|
||||
#define MPU_HFNMI_PRIVDEF (MPU_CTRL_HFNMIENA_Msk | MPU_CTRL_PRIVDEFENA_Msk)
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup CORTEX_MPU_Region_Enable CORTEX MPU Region Enable
|
||||
* @{
|
||||
*/
|
||||
#define MPU_REGION_ENABLE ((uint8_t)0x01)
|
||||
#define MPU_REGION_DISABLE ((uint8_t)0x00)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup CORTEX_MPU_Instruction_Access CORTEX MPU Instruction Access
|
||||
* @{
|
||||
*/
|
||||
#define MPU_INSTRUCTION_ACCESS_ENABLE ((uint8_t)0x00)
|
||||
#define MPU_INSTRUCTION_ACCESS_DISABLE ((uint8_t)0x01)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup CORTEX_MPU_Access_Shareable CORTEX MPU Instruction Access Shareable
|
||||
* @{
|
||||
*/
|
||||
#define MPU_ACCESS_SHAREABLE ((uint8_t)0x01)
|
||||
#define MPU_ACCESS_NOT_SHAREABLE ((uint8_t)0x00)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup CORTEX_MPU_Access_Cacheable CORTEX MPU Instruction Access Cacheable
|
||||
* @{
|
||||
*/
|
||||
#define MPU_ACCESS_CACHEABLE ((uint8_t)0x01)
|
||||
#define MPU_ACCESS_NOT_CACHEABLE ((uint8_t)0x00)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup CORTEX_MPU_Access_Bufferable CORTEX MPU Instruction Access Bufferable
|
||||
* @{
|
||||
*/
|
||||
#define MPU_ACCESS_BUFFERABLE ((uint8_t)0x01)
|
||||
#define MPU_ACCESS_NOT_BUFFERABLE ((uint8_t)0x00)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup CORTEX_MPU_TEX_Levels MPU TEX Levels
|
||||
* @{
|
||||
*/
|
||||
#define MPU_TEX_LEVEL0 ((uint8_t)0x00)
|
||||
#define MPU_TEX_LEVEL1 ((uint8_t)0x01)
|
||||
#define MPU_TEX_LEVEL2 ((uint8_t)0x02)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup CORTEX_MPU_Region_Size CORTEX MPU Region Size
|
||||
* @{
|
||||
*/
|
||||
#define MPU_REGION_SIZE_32B ((uint8_t)0x04)
|
||||
#define MPU_REGION_SIZE_64B ((uint8_t)0x05)
|
||||
#define MPU_REGION_SIZE_128B ((uint8_t)0x06)
|
||||
#define MPU_REGION_SIZE_256B ((uint8_t)0x07)
|
||||
#define MPU_REGION_SIZE_512B ((uint8_t)0x08)
|
||||
#define MPU_REGION_SIZE_1KB ((uint8_t)0x09)
|
||||
#define MPU_REGION_SIZE_2KB ((uint8_t)0x0A)
|
||||
#define MPU_REGION_SIZE_4KB ((uint8_t)0x0B)
|
||||
#define MPU_REGION_SIZE_8KB ((uint8_t)0x0C)
|
||||
#define MPU_REGION_SIZE_16KB ((uint8_t)0x0D)
|
||||
#define MPU_REGION_SIZE_32KB ((uint8_t)0x0E)
|
||||
#define MPU_REGION_SIZE_64KB ((uint8_t)0x0F)
|
||||
#define MPU_REGION_SIZE_128KB ((uint8_t)0x10)
|
||||
#define MPU_REGION_SIZE_256KB ((uint8_t)0x11)
|
||||
#define MPU_REGION_SIZE_512KB ((uint8_t)0x12)
|
||||
#define MPU_REGION_SIZE_1MB ((uint8_t)0x13)
|
||||
#define MPU_REGION_SIZE_2MB ((uint8_t)0x14)
|
||||
#define MPU_REGION_SIZE_4MB ((uint8_t)0x15)
|
||||
#define MPU_REGION_SIZE_8MB ((uint8_t)0x16)
|
||||
#define MPU_REGION_SIZE_16MB ((uint8_t)0x17)
|
||||
#define MPU_REGION_SIZE_32MB ((uint8_t)0x18)
|
||||
#define MPU_REGION_SIZE_64MB ((uint8_t)0x19)
|
||||
#define MPU_REGION_SIZE_128MB ((uint8_t)0x1A)
|
||||
#define MPU_REGION_SIZE_256MB ((uint8_t)0x1B)
|
||||
#define MPU_REGION_SIZE_512MB ((uint8_t)0x1C)
|
||||
#define MPU_REGION_SIZE_1GB ((uint8_t)0x1D)
|
||||
#define MPU_REGION_SIZE_2GB ((uint8_t)0x1E)
|
||||
#define MPU_REGION_SIZE_4GB ((uint8_t)0x1F)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup CORTEX_MPU_Region_Permission_Attributes CORTEX MPU Region Permission Attributes
|
||||
* @{
|
||||
*/
|
||||
#define MPU_REGION_NO_ACCESS ((uint8_t)0x00)
|
||||
#define MPU_REGION_PRIV_RW ((uint8_t)0x01)
|
||||
#define MPU_REGION_PRIV_RW_URO ((uint8_t)0x02)
|
||||
#define MPU_REGION_FULL_ACCESS ((uint8_t)0x03)
|
||||
#define MPU_REGION_PRIV_RO ((uint8_t)0x05)
|
||||
#define MPU_REGION_PRIV_RO_URO ((uint8_t)0x06)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup CORTEX_MPU_Region_Number CORTEX MPU Region Number
|
||||
* @{
|
||||
*/
|
||||
#define MPU_REGION_NUMBER0 ((uint8_t)0x00)
|
||||
#define MPU_REGION_NUMBER1 ((uint8_t)0x01)
|
||||
#define MPU_REGION_NUMBER2 ((uint8_t)0x02)
|
||||
#define MPU_REGION_NUMBER3 ((uint8_t)0x03)
|
||||
#define MPU_REGION_NUMBER4 ((uint8_t)0x04)
|
||||
#define MPU_REGION_NUMBER5 ((uint8_t)0x05)
|
||||
#define MPU_REGION_NUMBER6 ((uint8_t)0x06)
|
||||
#define MPU_REGION_NUMBER7 ((uint8_t)0x07)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
#endif /* __MPU_PRESENT */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
|
||||
/* Exported Macros -----------------------------------------------------------*/
|
||||
|
||||
/* Exported functions --------------------------------------------------------*/
|
||||
/** @addtogroup CORTEX_Exported_Functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup CORTEX_Exported_Functions_Group1
|
||||
* @{
|
||||
*/
|
||||
/* Initialization and de-initialization functions *****************************/
|
||||
void HAL_NVIC_SetPriorityGrouping(uint32_t PriorityGroup);
|
||||
void HAL_NVIC_SetPriority(IRQn_Type IRQn, uint32_t PreemptPriority, uint32_t SubPriority);
|
||||
void HAL_NVIC_EnableIRQ(IRQn_Type IRQn);
|
||||
void HAL_NVIC_DisableIRQ(IRQn_Type IRQn);
|
||||
void HAL_NVIC_SystemReset(void);
|
||||
uint32_t HAL_SYSTICK_Config(uint32_t TicksNumb);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup CORTEX_Exported_Functions_Group2
|
||||
* @{
|
||||
*/
|
||||
/* Peripheral Control functions ***********************************************/
|
||||
uint32_t HAL_NVIC_GetPriorityGrouping(void);
|
||||
void HAL_NVIC_GetPriority(IRQn_Type IRQn, uint32_t PriorityGroup, uint32_t* pPreemptPriority, uint32_t* pSubPriority);
|
||||
uint32_t HAL_NVIC_GetPendingIRQ(IRQn_Type IRQn);
|
||||
void HAL_NVIC_SetPendingIRQ(IRQn_Type IRQn);
|
||||
void HAL_NVIC_ClearPendingIRQ(IRQn_Type IRQn);
|
||||
uint32_t HAL_NVIC_GetActive(IRQn_Type IRQn);
|
||||
void HAL_SYSTICK_CLKSourceConfig(uint32_t CLKSource);
|
||||
void HAL_SYSTICK_IRQHandler(void);
|
||||
void HAL_SYSTICK_Callback(void);
|
||||
|
||||
#if (__MPU_PRESENT == 1U)
|
||||
void HAL_MPU_Enable(uint32_t MPU_Control);
|
||||
void HAL_MPU_Disable(void);
|
||||
void HAL_MPU_ConfigRegion(MPU_Region_InitTypeDef *MPU_Init);
|
||||
#endif /* __MPU_PRESENT */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Private types -------------------------------------------------------------*/
|
||||
/* Private variables ---------------------------------------------------------*/
|
||||
/* Private constants ---------------------------------------------------------*/
|
||||
/* Private macros ------------------------------------------------------------*/
|
||||
/** @defgroup CORTEX_Private_Macros CORTEX Private Macros
|
||||
* @{
|
||||
*/
|
||||
#define IS_NVIC_PRIORITY_GROUP(GROUP) (((GROUP) == NVIC_PRIORITYGROUP_0) || \
|
||||
((GROUP) == NVIC_PRIORITYGROUP_1) || \
|
||||
((GROUP) == NVIC_PRIORITYGROUP_2) || \
|
||||
((GROUP) == NVIC_PRIORITYGROUP_3) || \
|
||||
((GROUP) == NVIC_PRIORITYGROUP_4))
|
||||
|
||||
#define IS_NVIC_PREEMPTION_PRIORITY(PRIORITY) ((PRIORITY) < 0x10U)
|
||||
|
||||
#define IS_NVIC_SUB_PRIORITY(PRIORITY) ((PRIORITY) < 0x10U)
|
||||
|
||||
#define IS_NVIC_DEVICE_IRQ(IRQ) ((IRQ) >= (IRQn_Type)0x00U)
|
||||
|
||||
#define IS_SYSTICK_CLK_SOURCE(SOURCE) (((SOURCE) == SYSTICK_CLKSOURCE_HCLK) || \
|
||||
((SOURCE) == SYSTICK_CLKSOURCE_HCLK_DIV8))
|
||||
|
||||
#if (__MPU_PRESENT == 1U)
|
||||
#define IS_MPU_REGION_ENABLE(STATE) (((STATE) == MPU_REGION_ENABLE) || \
|
||||
((STATE) == MPU_REGION_DISABLE))
|
||||
|
||||
#define IS_MPU_INSTRUCTION_ACCESS(STATE) (((STATE) == MPU_INSTRUCTION_ACCESS_ENABLE) || \
|
||||
((STATE) == MPU_INSTRUCTION_ACCESS_DISABLE))
|
||||
|
||||
#define IS_MPU_ACCESS_SHAREABLE(STATE) (((STATE) == MPU_ACCESS_SHAREABLE) || \
|
||||
((STATE) == MPU_ACCESS_NOT_SHAREABLE))
|
||||
|
||||
#define IS_MPU_ACCESS_CACHEABLE(STATE) (((STATE) == MPU_ACCESS_CACHEABLE) || \
|
||||
((STATE) == MPU_ACCESS_NOT_CACHEABLE))
|
||||
|
||||
#define IS_MPU_ACCESS_BUFFERABLE(STATE) (((STATE) == MPU_ACCESS_BUFFERABLE) || \
|
||||
((STATE) == MPU_ACCESS_NOT_BUFFERABLE))
|
||||
|
||||
#define IS_MPU_TEX_LEVEL(TYPE) (((TYPE) == MPU_TEX_LEVEL0) || \
|
||||
((TYPE) == MPU_TEX_LEVEL1) || \
|
||||
((TYPE) == MPU_TEX_LEVEL2))
|
||||
|
||||
#define IS_MPU_REGION_PERMISSION_ATTRIBUTE(TYPE) (((TYPE) == MPU_REGION_NO_ACCESS) || \
|
||||
((TYPE) == MPU_REGION_PRIV_RW) || \
|
||||
((TYPE) == MPU_REGION_PRIV_RW_URO) || \
|
||||
((TYPE) == MPU_REGION_FULL_ACCESS) || \
|
||||
((TYPE) == MPU_REGION_PRIV_RO) || \
|
||||
((TYPE) == MPU_REGION_PRIV_RO_URO))
|
||||
|
||||
#define IS_MPU_REGION_NUMBER(NUMBER) (((NUMBER) == MPU_REGION_NUMBER0) || \
|
||||
((NUMBER) == MPU_REGION_NUMBER1) || \
|
||||
((NUMBER) == MPU_REGION_NUMBER2) || \
|
||||
((NUMBER) == MPU_REGION_NUMBER3) || \
|
||||
((NUMBER) == MPU_REGION_NUMBER4) || \
|
||||
((NUMBER) == MPU_REGION_NUMBER5) || \
|
||||
((NUMBER) == MPU_REGION_NUMBER6) || \
|
||||
((NUMBER) == MPU_REGION_NUMBER7))
|
||||
|
||||
#define IS_MPU_REGION_SIZE(SIZE) (((SIZE) == MPU_REGION_SIZE_32B) || \
|
||||
((SIZE) == MPU_REGION_SIZE_64B) || \
|
||||
((SIZE) == MPU_REGION_SIZE_128B) || \
|
||||
((SIZE) == MPU_REGION_SIZE_256B) || \
|
||||
((SIZE) == MPU_REGION_SIZE_512B) || \
|
||||
((SIZE) == MPU_REGION_SIZE_1KB) || \
|
||||
((SIZE) == MPU_REGION_SIZE_2KB) || \
|
||||
((SIZE) == MPU_REGION_SIZE_4KB) || \
|
||||
((SIZE) == MPU_REGION_SIZE_8KB) || \
|
||||
((SIZE) == MPU_REGION_SIZE_16KB) || \
|
||||
((SIZE) == MPU_REGION_SIZE_32KB) || \
|
||||
((SIZE) == MPU_REGION_SIZE_64KB) || \
|
||||
((SIZE) == MPU_REGION_SIZE_128KB) || \
|
||||
((SIZE) == MPU_REGION_SIZE_256KB) || \
|
||||
((SIZE) == MPU_REGION_SIZE_512KB) || \
|
||||
((SIZE) == MPU_REGION_SIZE_1MB) || \
|
||||
((SIZE) == MPU_REGION_SIZE_2MB) || \
|
||||
((SIZE) == MPU_REGION_SIZE_4MB) || \
|
||||
((SIZE) == MPU_REGION_SIZE_8MB) || \
|
||||
((SIZE) == MPU_REGION_SIZE_16MB) || \
|
||||
((SIZE) == MPU_REGION_SIZE_32MB) || \
|
||||
((SIZE) == MPU_REGION_SIZE_64MB) || \
|
||||
((SIZE) == MPU_REGION_SIZE_128MB) || \
|
||||
((SIZE) == MPU_REGION_SIZE_256MB) || \
|
||||
((SIZE) == MPU_REGION_SIZE_512MB) || \
|
||||
((SIZE) == MPU_REGION_SIZE_1GB) || \
|
||||
((SIZE) == MPU_REGION_SIZE_2GB) || \
|
||||
((SIZE) == MPU_REGION_SIZE_4GB))
|
||||
|
||||
#define IS_MPU_SUB_REGION_DISABLE(SUBREGION) ((SUBREGION) < (uint16_t)0x00FF)
|
||||
#endif /* __MPU_PRESENT */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Private functions ---------------------------------------------------------*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* __STM32F4xx_HAL_CORTEX_H */
|
||||
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file stm32f4xx_hal_cortex.h
|
||||
* @author MCD Application Team
|
||||
* @brief Header file of CORTEX HAL module.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* Copyright (c) 2017 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software is licensed under terms that can be found in the LICENSE file in
|
||||
* the root directory of this software component.
|
||||
* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef __STM32F4xx_HAL_CORTEX_H
|
||||
#define __STM32F4xx_HAL_CORTEX_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "stm32f4xx_hal_def.h"
|
||||
|
||||
/** @addtogroup STM32F4xx_HAL_Driver
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup CORTEX
|
||||
* @{
|
||||
*/
|
||||
/* Exported types ------------------------------------------------------------*/
|
||||
/** @defgroup CORTEX_Exported_Types Cortex Exported Types
|
||||
* @{
|
||||
*/
|
||||
|
||||
#if (__MPU_PRESENT == 1U)
|
||||
/** @defgroup CORTEX_MPU_Region_Initialization_Structure_definition MPU Region Initialization Structure Definition
|
||||
* @brief MPU Region initialization structure
|
||||
* @{
|
||||
*/
|
||||
typedef struct
|
||||
{
|
||||
uint8_t Enable; /*!< Specifies the status of the region.
|
||||
This parameter can be a value of @ref CORTEX_MPU_Region_Enable */
|
||||
uint8_t Number; /*!< Specifies the number of the region to protect.
|
||||
This parameter can be a value of @ref CORTEX_MPU_Region_Number */
|
||||
uint32_t BaseAddress; /*!< Specifies the base address of the region to protect. */
|
||||
uint8_t Size; /*!< Specifies the size of the region to protect.
|
||||
This parameter can be a value of @ref CORTEX_MPU_Region_Size */
|
||||
uint8_t SubRegionDisable; /*!< Specifies the number of the subregion protection to disable.
|
||||
This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF */
|
||||
uint8_t TypeExtField; /*!< Specifies the TEX field level.
|
||||
This parameter can be a value of @ref CORTEX_MPU_TEX_Levels */
|
||||
uint8_t AccessPermission; /*!< Specifies the region access permission type.
|
||||
This parameter can be a value of @ref CORTEX_MPU_Region_Permission_Attributes */
|
||||
uint8_t DisableExec; /*!< Specifies the instruction access status.
|
||||
This parameter can be a value of @ref CORTEX_MPU_Instruction_Access */
|
||||
uint8_t IsShareable; /*!< Specifies the shareability status of the protected region.
|
||||
This parameter can be a value of @ref CORTEX_MPU_Access_Shareable */
|
||||
uint8_t IsCacheable; /*!< Specifies the cacheable status of the region protected.
|
||||
This parameter can be a value of @ref CORTEX_MPU_Access_Cacheable */
|
||||
uint8_t IsBufferable; /*!< Specifies the bufferable status of the protected region.
|
||||
This parameter can be a value of @ref CORTEX_MPU_Access_Bufferable */
|
||||
}MPU_Region_InitTypeDef;
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
#endif /* __MPU_PRESENT */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported constants --------------------------------------------------------*/
|
||||
|
||||
/** @defgroup CORTEX_Exported_Constants CORTEX Exported Constants
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup CORTEX_Preemption_Priority_Group CORTEX Preemption Priority Group
|
||||
* @{
|
||||
*/
|
||||
#define NVIC_PRIORITYGROUP_0 0x00000007U /*!< 0 bits for pre-emption priority
|
||||
4 bits for subpriority */
|
||||
#define NVIC_PRIORITYGROUP_1 0x00000006U /*!< 1 bits for pre-emption priority
|
||||
3 bits for subpriority */
|
||||
#define NVIC_PRIORITYGROUP_2 0x00000005U /*!< 2 bits for pre-emption priority
|
||||
2 bits for subpriority */
|
||||
#define NVIC_PRIORITYGROUP_3 0x00000004U /*!< 3 bits for pre-emption priority
|
||||
1 bits for subpriority */
|
||||
#define NVIC_PRIORITYGROUP_4 0x00000003U /*!< 4 bits for pre-emption priority
|
||||
0 bits for subpriority */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup CORTEX_SysTick_clock_source CORTEX _SysTick clock source
|
||||
* @{
|
||||
*/
|
||||
#define SYSTICK_CLKSOURCE_HCLK_DIV8 0x00000000U
|
||||
#define SYSTICK_CLKSOURCE_HCLK 0x00000004U
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#if (__MPU_PRESENT == 1)
|
||||
/** @defgroup CORTEX_MPU_HFNMI_PRIVDEF_Control MPU HFNMI and PRIVILEGED Access control
|
||||
* @{
|
||||
*/
|
||||
#define MPU_HFNMI_PRIVDEF_NONE 0x00000000U
|
||||
#define MPU_HARDFAULT_NMI MPU_CTRL_HFNMIENA_Msk
|
||||
#define MPU_PRIVILEGED_DEFAULT MPU_CTRL_PRIVDEFENA_Msk
|
||||
#define MPU_HFNMI_PRIVDEF (MPU_CTRL_HFNMIENA_Msk | MPU_CTRL_PRIVDEFENA_Msk)
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup CORTEX_MPU_Region_Enable CORTEX MPU Region Enable
|
||||
* @{
|
||||
*/
|
||||
#define MPU_REGION_ENABLE ((uint8_t)0x01)
|
||||
#define MPU_REGION_DISABLE ((uint8_t)0x00)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup CORTEX_MPU_Instruction_Access CORTEX MPU Instruction Access
|
||||
* @{
|
||||
*/
|
||||
#define MPU_INSTRUCTION_ACCESS_ENABLE ((uint8_t)0x00)
|
||||
#define MPU_INSTRUCTION_ACCESS_DISABLE ((uint8_t)0x01)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup CORTEX_MPU_Access_Shareable CORTEX MPU Instruction Access Shareable
|
||||
* @{
|
||||
*/
|
||||
#define MPU_ACCESS_SHAREABLE ((uint8_t)0x01)
|
||||
#define MPU_ACCESS_NOT_SHAREABLE ((uint8_t)0x00)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup CORTEX_MPU_Access_Cacheable CORTEX MPU Instruction Access Cacheable
|
||||
* @{
|
||||
*/
|
||||
#define MPU_ACCESS_CACHEABLE ((uint8_t)0x01)
|
||||
#define MPU_ACCESS_NOT_CACHEABLE ((uint8_t)0x00)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup CORTEX_MPU_Access_Bufferable CORTEX MPU Instruction Access Bufferable
|
||||
* @{
|
||||
*/
|
||||
#define MPU_ACCESS_BUFFERABLE ((uint8_t)0x01)
|
||||
#define MPU_ACCESS_NOT_BUFFERABLE ((uint8_t)0x00)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup CORTEX_MPU_TEX_Levels MPU TEX Levels
|
||||
* @{
|
||||
*/
|
||||
#define MPU_TEX_LEVEL0 ((uint8_t)0x00)
|
||||
#define MPU_TEX_LEVEL1 ((uint8_t)0x01)
|
||||
#define MPU_TEX_LEVEL2 ((uint8_t)0x02)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup CORTEX_MPU_Region_Size CORTEX MPU Region Size
|
||||
* @{
|
||||
*/
|
||||
#define MPU_REGION_SIZE_32B ((uint8_t)0x04)
|
||||
#define MPU_REGION_SIZE_64B ((uint8_t)0x05)
|
||||
#define MPU_REGION_SIZE_128B ((uint8_t)0x06)
|
||||
#define MPU_REGION_SIZE_256B ((uint8_t)0x07)
|
||||
#define MPU_REGION_SIZE_512B ((uint8_t)0x08)
|
||||
#define MPU_REGION_SIZE_1KB ((uint8_t)0x09)
|
||||
#define MPU_REGION_SIZE_2KB ((uint8_t)0x0A)
|
||||
#define MPU_REGION_SIZE_4KB ((uint8_t)0x0B)
|
||||
#define MPU_REGION_SIZE_8KB ((uint8_t)0x0C)
|
||||
#define MPU_REGION_SIZE_16KB ((uint8_t)0x0D)
|
||||
#define MPU_REGION_SIZE_32KB ((uint8_t)0x0E)
|
||||
#define MPU_REGION_SIZE_64KB ((uint8_t)0x0F)
|
||||
#define MPU_REGION_SIZE_128KB ((uint8_t)0x10)
|
||||
#define MPU_REGION_SIZE_256KB ((uint8_t)0x11)
|
||||
#define MPU_REGION_SIZE_512KB ((uint8_t)0x12)
|
||||
#define MPU_REGION_SIZE_1MB ((uint8_t)0x13)
|
||||
#define MPU_REGION_SIZE_2MB ((uint8_t)0x14)
|
||||
#define MPU_REGION_SIZE_4MB ((uint8_t)0x15)
|
||||
#define MPU_REGION_SIZE_8MB ((uint8_t)0x16)
|
||||
#define MPU_REGION_SIZE_16MB ((uint8_t)0x17)
|
||||
#define MPU_REGION_SIZE_32MB ((uint8_t)0x18)
|
||||
#define MPU_REGION_SIZE_64MB ((uint8_t)0x19)
|
||||
#define MPU_REGION_SIZE_128MB ((uint8_t)0x1A)
|
||||
#define MPU_REGION_SIZE_256MB ((uint8_t)0x1B)
|
||||
#define MPU_REGION_SIZE_512MB ((uint8_t)0x1C)
|
||||
#define MPU_REGION_SIZE_1GB ((uint8_t)0x1D)
|
||||
#define MPU_REGION_SIZE_2GB ((uint8_t)0x1E)
|
||||
#define MPU_REGION_SIZE_4GB ((uint8_t)0x1F)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup CORTEX_MPU_Region_Permission_Attributes CORTEX MPU Region Permission Attributes
|
||||
* @{
|
||||
*/
|
||||
#define MPU_REGION_NO_ACCESS ((uint8_t)0x00)
|
||||
#define MPU_REGION_PRIV_RW ((uint8_t)0x01)
|
||||
#define MPU_REGION_PRIV_RW_URO ((uint8_t)0x02)
|
||||
#define MPU_REGION_FULL_ACCESS ((uint8_t)0x03)
|
||||
#define MPU_REGION_PRIV_RO ((uint8_t)0x05)
|
||||
#define MPU_REGION_PRIV_RO_URO ((uint8_t)0x06)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup CORTEX_MPU_Region_Number CORTEX MPU Region Number
|
||||
* @{
|
||||
*/
|
||||
#define MPU_REGION_NUMBER0 ((uint8_t)0x00)
|
||||
#define MPU_REGION_NUMBER1 ((uint8_t)0x01)
|
||||
#define MPU_REGION_NUMBER2 ((uint8_t)0x02)
|
||||
#define MPU_REGION_NUMBER3 ((uint8_t)0x03)
|
||||
#define MPU_REGION_NUMBER4 ((uint8_t)0x04)
|
||||
#define MPU_REGION_NUMBER5 ((uint8_t)0x05)
|
||||
#define MPU_REGION_NUMBER6 ((uint8_t)0x06)
|
||||
#define MPU_REGION_NUMBER7 ((uint8_t)0x07)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
#endif /* __MPU_PRESENT */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
|
||||
/* Exported Macros -----------------------------------------------------------*/
|
||||
|
||||
/* Exported functions --------------------------------------------------------*/
|
||||
/** @addtogroup CORTEX_Exported_Functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup CORTEX_Exported_Functions_Group1
|
||||
* @{
|
||||
*/
|
||||
/* Initialization and de-initialization functions *****************************/
|
||||
void HAL_NVIC_SetPriorityGrouping(uint32_t PriorityGroup);
|
||||
void HAL_NVIC_SetPriority(IRQn_Type IRQn, uint32_t PreemptPriority, uint32_t SubPriority);
|
||||
void HAL_NVIC_EnableIRQ(IRQn_Type IRQn);
|
||||
void HAL_NVIC_DisableIRQ(IRQn_Type IRQn);
|
||||
void HAL_NVIC_SystemReset(void);
|
||||
uint32_t HAL_SYSTICK_Config(uint32_t TicksNumb);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup CORTEX_Exported_Functions_Group2
|
||||
* @{
|
||||
*/
|
||||
/* Peripheral Control functions ***********************************************/
|
||||
uint32_t HAL_NVIC_GetPriorityGrouping(void);
|
||||
void HAL_NVIC_GetPriority(IRQn_Type IRQn, uint32_t PriorityGroup, uint32_t* pPreemptPriority, uint32_t* pSubPriority);
|
||||
uint32_t HAL_NVIC_GetPendingIRQ(IRQn_Type IRQn);
|
||||
void HAL_NVIC_SetPendingIRQ(IRQn_Type IRQn);
|
||||
void HAL_NVIC_ClearPendingIRQ(IRQn_Type IRQn);
|
||||
uint32_t HAL_NVIC_GetActive(IRQn_Type IRQn);
|
||||
void HAL_SYSTICK_CLKSourceConfig(uint32_t CLKSource);
|
||||
void HAL_SYSTICK_IRQHandler(void);
|
||||
void HAL_SYSTICK_Callback(void);
|
||||
|
||||
#if (__MPU_PRESENT == 1U)
|
||||
void HAL_MPU_Enable(uint32_t MPU_Control);
|
||||
void HAL_MPU_Disable(void);
|
||||
void HAL_MPU_EnableRegion(uint32_t RegionNumber);
|
||||
void HAL_MPU_DisableRegion(uint32_t RegionNumber);
|
||||
void HAL_MPU_ConfigRegion(MPU_Region_InitTypeDef *MPU_Init);
|
||||
#endif /* __MPU_PRESENT */
|
||||
void HAL_CORTEX_ClearEvent(void);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Private types -------------------------------------------------------------*/
|
||||
/* Private variables ---------------------------------------------------------*/
|
||||
/* Private constants ---------------------------------------------------------*/
|
||||
/* Private macros ------------------------------------------------------------*/
|
||||
/** @defgroup CORTEX_Private_Macros CORTEX Private Macros
|
||||
* @{
|
||||
*/
|
||||
#define IS_NVIC_PRIORITY_GROUP(GROUP) (((GROUP) == NVIC_PRIORITYGROUP_0) || \
|
||||
((GROUP) == NVIC_PRIORITYGROUP_1) || \
|
||||
((GROUP) == NVIC_PRIORITYGROUP_2) || \
|
||||
((GROUP) == NVIC_PRIORITYGROUP_3) || \
|
||||
((GROUP) == NVIC_PRIORITYGROUP_4))
|
||||
|
||||
#define IS_NVIC_PREEMPTION_PRIORITY(PRIORITY) ((PRIORITY) < 0x10U)
|
||||
|
||||
#define IS_NVIC_SUB_PRIORITY(PRIORITY) ((PRIORITY) < 0x10U)
|
||||
|
||||
#define IS_NVIC_DEVICE_IRQ(IRQ) ((IRQ) >= (IRQn_Type)0x00U)
|
||||
|
||||
#define IS_SYSTICK_CLK_SOURCE(SOURCE) (((SOURCE) == SYSTICK_CLKSOURCE_HCLK) || \
|
||||
((SOURCE) == SYSTICK_CLKSOURCE_HCLK_DIV8))
|
||||
|
||||
#if (__MPU_PRESENT == 1U)
|
||||
#define IS_MPU_REGION_ENABLE(STATE) (((STATE) == MPU_REGION_ENABLE) || \
|
||||
((STATE) == MPU_REGION_DISABLE))
|
||||
|
||||
#define IS_MPU_INSTRUCTION_ACCESS(STATE) (((STATE) == MPU_INSTRUCTION_ACCESS_ENABLE) || \
|
||||
((STATE) == MPU_INSTRUCTION_ACCESS_DISABLE))
|
||||
|
||||
#define IS_MPU_ACCESS_SHAREABLE(STATE) (((STATE) == MPU_ACCESS_SHAREABLE) || \
|
||||
((STATE) == MPU_ACCESS_NOT_SHAREABLE))
|
||||
|
||||
#define IS_MPU_ACCESS_CACHEABLE(STATE) (((STATE) == MPU_ACCESS_CACHEABLE) || \
|
||||
((STATE) == MPU_ACCESS_NOT_CACHEABLE))
|
||||
|
||||
#define IS_MPU_ACCESS_BUFFERABLE(STATE) (((STATE) == MPU_ACCESS_BUFFERABLE) || \
|
||||
((STATE) == MPU_ACCESS_NOT_BUFFERABLE))
|
||||
|
||||
#define IS_MPU_TEX_LEVEL(TYPE) (((TYPE) == MPU_TEX_LEVEL0) || \
|
||||
((TYPE) == MPU_TEX_LEVEL1) || \
|
||||
((TYPE) == MPU_TEX_LEVEL2))
|
||||
|
||||
#define IS_MPU_REGION_PERMISSION_ATTRIBUTE(TYPE) (((TYPE) == MPU_REGION_NO_ACCESS) || \
|
||||
((TYPE) == MPU_REGION_PRIV_RW) || \
|
||||
((TYPE) == MPU_REGION_PRIV_RW_URO) || \
|
||||
((TYPE) == MPU_REGION_FULL_ACCESS) || \
|
||||
((TYPE) == MPU_REGION_PRIV_RO) || \
|
||||
((TYPE) == MPU_REGION_PRIV_RO_URO))
|
||||
|
||||
#define IS_MPU_REGION_NUMBER(NUMBER) (((NUMBER) == MPU_REGION_NUMBER0) || \
|
||||
((NUMBER) == MPU_REGION_NUMBER1) || \
|
||||
((NUMBER) == MPU_REGION_NUMBER2) || \
|
||||
((NUMBER) == MPU_REGION_NUMBER3) || \
|
||||
((NUMBER) == MPU_REGION_NUMBER4) || \
|
||||
((NUMBER) == MPU_REGION_NUMBER5) || \
|
||||
((NUMBER) == MPU_REGION_NUMBER6) || \
|
||||
((NUMBER) == MPU_REGION_NUMBER7))
|
||||
|
||||
#define IS_MPU_REGION_SIZE(SIZE) (((SIZE) == MPU_REGION_SIZE_32B) || \
|
||||
((SIZE) == MPU_REGION_SIZE_64B) || \
|
||||
((SIZE) == MPU_REGION_SIZE_128B) || \
|
||||
((SIZE) == MPU_REGION_SIZE_256B) || \
|
||||
((SIZE) == MPU_REGION_SIZE_512B) || \
|
||||
((SIZE) == MPU_REGION_SIZE_1KB) || \
|
||||
((SIZE) == MPU_REGION_SIZE_2KB) || \
|
||||
((SIZE) == MPU_REGION_SIZE_4KB) || \
|
||||
((SIZE) == MPU_REGION_SIZE_8KB) || \
|
||||
((SIZE) == MPU_REGION_SIZE_16KB) || \
|
||||
((SIZE) == MPU_REGION_SIZE_32KB) || \
|
||||
((SIZE) == MPU_REGION_SIZE_64KB) || \
|
||||
((SIZE) == MPU_REGION_SIZE_128KB) || \
|
||||
((SIZE) == MPU_REGION_SIZE_256KB) || \
|
||||
((SIZE) == MPU_REGION_SIZE_512KB) || \
|
||||
((SIZE) == MPU_REGION_SIZE_1MB) || \
|
||||
((SIZE) == MPU_REGION_SIZE_2MB) || \
|
||||
((SIZE) == MPU_REGION_SIZE_4MB) || \
|
||||
((SIZE) == MPU_REGION_SIZE_8MB) || \
|
||||
((SIZE) == MPU_REGION_SIZE_16MB) || \
|
||||
((SIZE) == MPU_REGION_SIZE_32MB) || \
|
||||
((SIZE) == MPU_REGION_SIZE_64MB) || \
|
||||
((SIZE) == MPU_REGION_SIZE_128MB) || \
|
||||
((SIZE) == MPU_REGION_SIZE_256MB) || \
|
||||
((SIZE) == MPU_REGION_SIZE_512MB) || \
|
||||
((SIZE) == MPU_REGION_SIZE_1GB) || \
|
||||
((SIZE) == MPU_REGION_SIZE_2GB) || \
|
||||
((SIZE) == MPU_REGION_SIZE_4GB))
|
||||
|
||||
#define IS_MPU_SUB_REGION_DISABLE(SUBREGION) ((SUBREGION) < (uint16_t)0x00FF)
|
||||
#endif /* __MPU_PRESENT */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Private functions ---------------------------------------------------------*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* __STM32F4xx_HAL_CORTEX_H */
|
||||
|
||||
|
||||
|
|
|
|||
|
|
@ -1,197 +1,212 @@
|
|||
/**
|
||||
******************************************************************************
|
||||
* @file stm32f4xx_hal_def.h
|
||||
* @author MCD Application Team
|
||||
* @brief This file contains HAL common defines, enumeration, macros and
|
||||
* structures definitions.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* <h2><center>© Copyright (c) 2017 STMicroelectronics.
|
||||
* All rights reserved.</center></h2>
|
||||
*
|
||||
* This software component is licensed by ST under BSD 3-Clause license,
|
||||
* the "License"; You may not use this file except in compliance with the
|
||||
* License. You may obtain a copy of the License at:
|
||||
* opensource.org/licenses/BSD-3-Clause
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef __STM32F4xx_HAL_DEF
|
||||
#define __STM32F4xx_HAL_DEF
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "stm32f4xx.h"
|
||||
#include "Legacy/stm32_hal_legacy.h"
|
||||
#include <stddef.h>
|
||||
|
||||
/* Exported types ------------------------------------------------------------*/
|
||||
|
||||
/**
|
||||
* @brief HAL Status structures definition
|
||||
*/
|
||||
typedef enum
|
||||
{
|
||||
HAL_OK = 0x00U,
|
||||
HAL_ERROR = 0x01U,
|
||||
HAL_BUSY = 0x02U,
|
||||
HAL_TIMEOUT = 0x03U
|
||||
} HAL_StatusTypeDef;
|
||||
|
||||
/**
|
||||
* @brief HAL Lock structures definition
|
||||
*/
|
||||
typedef enum
|
||||
{
|
||||
HAL_UNLOCKED = 0x00U,
|
||||
HAL_LOCKED = 0x01U
|
||||
} HAL_LockTypeDef;
|
||||
|
||||
/* Exported macro ------------------------------------------------------------*/
|
||||
|
||||
#define UNUSED(X) (void)X /* To avoid gcc/g++ warnings */
|
||||
|
||||
#define HAL_MAX_DELAY 0xFFFFFFFFU
|
||||
|
||||
#define HAL_IS_BIT_SET(REG, BIT) (((REG) & (BIT)) == (BIT))
|
||||
#define HAL_IS_BIT_CLR(REG, BIT) (((REG) & (BIT)) == 0U)
|
||||
|
||||
#define __HAL_LINKDMA(__HANDLE__, __PPP_DMA_FIELD__, __DMA_HANDLE__) \
|
||||
do{ \
|
||||
(__HANDLE__)->__PPP_DMA_FIELD__ = &(__DMA_HANDLE__); \
|
||||
(__DMA_HANDLE__).Parent = (__HANDLE__); \
|
||||
} while(0U)
|
||||
|
||||
/** @brief Reset the Handle's State field.
|
||||
* @param __HANDLE__ specifies the Peripheral Handle.
|
||||
* @note This macro can be used for the following purpose:
|
||||
* - When the Handle is declared as local variable; before passing it as parameter
|
||||
* to HAL_PPP_Init() for the first time, it is mandatory to use this macro
|
||||
* to set to 0 the Handle's "State" field.
|
||||
* Otherwise, "State" field may have any random value and the first time the function
|
||||
* HAL_PPP_Init() is called, the low level hardware initialization will be missed
|
||||
* (i.e. HAL_PPP_MspInit() will not be executed).
|
||||
* - When there is a need to reconfigure the low level hardware: instead of calling
|
||||
* HAL_PPP_DeInit() then HAL_PPP_Init(), user can make a call to this macro then HAL_PPP_Init().
|
||||
* In this later function, when the Handle's "State" field is set to 0, it will execute the function
|
||||
* HAL_PPP_MspInit() which will reconfigure the low level hardware.
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = 0U)
|
||||
|
||||
#if (USE_RTOS == 1U)
|
||||
/* Reserved for future use */
|
||||
#error "USE_RTOS should be 0 in the current HAL release"
|
||||
#else
|
||||
#define __HAL_LOCK(__HANDLE__) \
|
||||
do{ \
|
||||
if((__HANDLE__)->Lock == HAL_LOCKED) \
|
||||
{ \
|
||||
return HAL_BUSY; \
|
||||
} \
|
||||
else \
|
||||
{ \
|
||||
(__HANDLE__)->Lock = HAL_LOCKED; \
|
||||
} \
|
||||
}while (0U)
|
||||
|
||||
#define __HAL_UNLOCK(__HANDLE__) \
|
||||
do{ \
|
||||
(__HANDLE__)->Lock = HAL_UNLOCKED; \
|
||||
}while (0U)
|
||||
#endif /* USE_RTOS */
|
||||
|
||||
#if defined ( __GNUC__ ) && !defined (__CC_ARM) /* GNU Compiler */
|
||||
#ifndef __weak
|
||||
#define __weak __attribute__((weak))
|
||||
#endif /* __weak */
|
||||
#ifndef __packed
|
||||
#define __packed __attribute__((__packed__))
|
||||
#endif /* __packed */
|
||||
#endif /* __GNUC__ */
|
||||
|
||||
|
||||
/* Macro to get variable aligned on 4-bytes, for __ICCARM__ the directive "#pragma data_alignment=4" must be used instead */
|
||||
#if defined ( __GNUC__ ) && !defined (__CC_ARM) /* GNU Compiler */
|
||||
#ifndef __ALIGN_END
|
||||
#define __ALIGN_END __attribute__ ((aligned (4)))
|
||||
#endif /* __ALIGN_END */
|
||||
#ifndef __ALIGN_BEGIN
|
||||
#define __ALIGN_BEGIN
|
||||
#endif /* __ALIGN_BEGIN */
|
||||
#else
|
||||
#ifndef __ALIGN_END
|
||||
#define __ALIGN_END
|
||||
#endif /* __ALIGN_END */
|
||||
#ifndef __ALIGN_BEGIN
|
||||
#if defined (__CC_ARM) /* ARM Compiler */
|
||||
#define __ALIGN_BEGIN __align(4)
|
||||
#elif defined (__ICCARM__) /* IAR Compiler */
|
||||
#define __ALIGN_BEGIN
|
||||
#endif /* __CC_ARM */
|
||||
#endif /* __ALIGN_BEGIN */
|
||||
#endif /* __GNUC__ */
|
||||
|
||||
|
||||
/**
|
||||
* @brief __RAM_FUNC definition
|
||||
*/
|
||||
#if defined ( __CC_ARM )
|
||||
/* ARM Compiler
|
||||
------------
|
||||
RAM functions are defined using the toolchain options.
|
||||
Functions that are executed in RAM should reside in a separate source module.
|
||||
Using the 'Options for File' dialog you can simply change the 'Code / Const'
|
||||
area of a module to a memory space in physical RAM.
|
||||
Available memory areas are declared in the 'Target' tab of the 'Options for Target'
|
||||
dialog.
|
||||
*/
|
||||
#define __RAM_FUNC
|
||||
|
||||
#elif defined ( __ICCARM__ )
|
||||
/* ICCARM Compiler
|
||||
---------------
|
||||
RAM functions are defined using a specific toolchain keyword "__ramfunc".
|
||||
*/
|
||||
#define __RAM_FUNC __ramfunc
|
||||
|
||||
#elif defined ( __GNUC__ )
|
||||
/* GNU Compiler
|
||||
------------
|
||||
RAM functions are defined using a specific toolchain attribute
|
||||
"__attribute__((section(".RamFunc")))".
|
||||
*/
|
||||
#define __RAM_FUNC __attribute__((section(".RamFunc")))
|
||||
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief __NOINLINE definition
|
||||
*/
|
||||
#if defined ( __CC_ARM ) || defined ( __GNUC__ )
|
||||
/* ARM & GNUCompiler
|
||||
----------------
|
||||
*/
|
||||
#define __NOINLINE __attribute__ ( (noinline) )
|
||||
|
||||
#elif defined ( __ICCARM__ )
|
||||
/* ICCARM Compiler
|
||||
---------------
|
||||
*/
|
||||
#define __NOINLINE _Pragma("optimize = no_inline")
|
||||
|
||||
#endif
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* ___STM32F4xx_HAL_DEF */
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file stm32f4xx_hal_def.h
|
||||
* @author MCD Application Team
|
||||
* @brief This file contains HAL common defines, enumeration, macros and
|
||||
* structures definitions.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* Copyright (c) 2017 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software is licensed under terms that can be found in the LICENSE file
|
||||
* in the root directory of this software component.
|
||||
* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef __STM32F4xx_HAL_DEF
|
||||
#define __STM32F4xx_HAL_DEF
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "stm32f4xx.h"
|
||||
#include "Legacy/stm32_hal_legacy.h"
|
||||
#include <stddef.h>
|
||||
|
||||
/* Exported types ------------------------------------------------------------*/
|
||||
|
||||
/**
|
||||
* @brief HAL Status structures definition
|
||||
*/
|
||||
typedef enum
|
||||
{
|
||||
HAL_OK = 0x00U,
|
||||
HAL_ERROR = 0x01U,
|
||||
HAL_BUSY = 0x02U,
|
||||
HAL_TIMEOUT = 0x03U
|
||||
} HAL_StatusTypeDef;
|
||||
|
||||
/**
|
||||
* @brief HAL Lock structures definition
|
||||
*/
|
||||
typedef enum
|
||||
{
|
||||
HAL_UNLOCKED = 0x00U,
|
||||
HAL_LOCKED = 0x01U
|
||||
} HAL_LockTypeDef;
|
||||
|
||||
/* Exported macro ------------------------------------------------------------*/
|
||||
|
||||
#if !defined(UNUSED)
|
||||
#define UNUSED(X) (void)X /* To avoid gcc/g++ warnings */
|
||||
#endif /* UNUSED */
|
||||
|
||||
#define HAL_MAX_DELAY 0xFFFFFFFFU
|
||||
|
||||
#define HAL_IS_BIT_SET(REG, BIT) (((REG) & (BIT)) == (BIT))
|
||||
#define HAL_IS_BIT_CLR(REG, BIT) (((REG) & (BIT)) == 0U)
|
||||
|
||||
#define __HAL_LINKDMA(__HANDLE__, __PPP_DMA_FIELD__, __DMA_HANDLE__) \
|
||||
do{ \
|
||||
(__HANDLE__)->__PPP_DMA_FIELD__ = &(__DMA_HANDLE__); \
|
||||
(__DMA_HANDLE__).Parent = (__HANDLE__); \
|
||||
} while(0U)
|
||||
|
||||
/** @brief Reset the Handle's State field.
|
||||
* @param __HANDLE__ specifies the Peripheral Handle.
|
||||
* @note This macro can be used for the following purpose:
|
||||
* - When the Handle is declared as local variable; before passing it as parameter
|
||||
* to HAL_PPP_Init() for the first time, it is mandatory to use this macro
|
||||
* to set to 0 the Handle's "State" field.
|
||||
* Otherwise, "State" field may have any random value and the first time the function
|
||||
* HAL_PPP_Init() is called, the low level hardware initialization will be missed
|
||||
* (i.e. HAL_PPP_MspInit() will not be executed).
|
||||
* - When there is a need to reconfigure the low level hardware: instead of calling
|
||||
* HAL_PPP_DeInit() then HAL_PPP_Init(), user can make a call to this macro then HAL_PPP_Init().
|
||||
* In this later function, when the Handle's "State" field is set to 0, it will execute the function
|
||||
* HAL_PPP_MspInit() which will reconfigure the low level hardware.
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = 0U)
|
||||
|
||||
#if (USE_RTOS == 1U)
|
||||
/* Reserved for future use */
|
||||
#error "USE_RTOS should be 0 in the current HAL release"
|
||||
#else
|
||||
#define __HAL_LOCK(__HANDLE__) \
|
||||
do{ \
|
||||
if((__HANDLE__)->Lock == HAL_LOCKED) \
|
||||
{ \
|
||||
return HAL_BUSY; \
|
||||
} \
|
||||
else \
|
||||
{ \
|
||||
(__HANDLE__)->Lock = HAL_LOCKED; \
|
||||
} \
|
||||
}while (0U)
|
||||
|
||||
#define __HAL_UNLOCK(__HANDLE__) \
|
||||
do{ \
|
||||
(__HANDLE__)->Lock = HAL_UNLOCKED; \
|
||||
}while (0U)
|
||||
#endif /* USE_RTOS */
|
||||
|
||||
#if defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) /* ARM Compiler V6 */
|
||||
#ifndef __weak
|
||||
#define __weak __attribute__((weak))
|
||||
#endif
|
||||
#ifndef __packed
|
||||
#define __packed __attribute__((packed))
|
||||
#endif
|
||||
#elif defined ( __GNUC__ ) && !defined (__CC_ARM) /* GNU Compiler */
|
||||
#ifndef __weak
|
||||
#define __weak __attribute__((weak))
|
||||
#endif /* __weak */
|
||||
#ifndef __packed
|
||||
#define __packed __attribute__((__packed__))
|
||||
#endif /* __packed */
|
||||
#endif /* __GNUC__ */
|
||||
|
||||
|
||||
/* Macro to get variable aligned on 4-bytes, for __ICCARM__ the directive "#pragma data_alignment=4" must be used instead */
|
||||
#if defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) /* ARM Compiler V6 */
|
||||
#ifndef __ALIGN_BEGIN
|
||||
#define __ALIGN_BEGIN
|
||||
#endif
|
||||
#ifndef __ALIGN_END
|
||||
#define __ALIGN_END __attribute__ ((aligned (4)))
|
||||
#endif
|
||||
#elif defined ( __GNUC__ ) && !defined (__CC_ARM) /* GNU Compiler */
|
||||
#ifndef __ALIGN_END
|
||||
#define __ALIGN_END __attribute__ ((aligned (4)))
|
||||
#endif /* __ALIGN_END */
|
||||
#ifndef __ALIGN_BEGIN
|
||||
#define __ALIGN_BEGIN
|
||||
#endif /* __ALIGN_BEGIN */
|
||||
#else
|
||||
#ifndef __ALIGN_END
|
||||
#define __ALIGN_END
|
||||
#endif /* __ALIGN_END */
|
||||
#ifndef __ALIGN_BEGIN
|
||||
#if defined (__CC_ARM) /* ARM Compiler V5*/
|
||||
#define __ALIGN_BEGIN __align(4)
|
||||
#elif defined (__ICCARM__) /* IAR Compiler */
|
||||
#define __ALIGN_BEGIN
|
||||
#endif /* __CC_ARM */
|
||||
#endif /* __ALIGN_BEGIN */
|
||||
#endif /* __GNUC__ */
|
||||
|
||||
|
||||
/**
|
||||
* @brief __RAM_FUNC definition
|
||||
*/
|
||||
#if defined ( __CC_ARM ) || (defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050))
|
||||
/* ARM Compiler V4/V5 and V6
|
||||
--------------------------
|
||||
RAM functions are defined using the toolchain options.
|
||||
Functions that are executed in RAM should reside in a separate source module.
|
||||
Using the 'Options for File' dialog you can simply change the 'Code / Const'
|
||||
area of a module to a memory space in physical RAM.
|
||||
Available memory areas are declared in the 'Target' tab of the 'Options for Target'
|
||||
dialog.
|
||||
*/
|
||||
#define __RAM_FUNC
|
||||
|
||||
#elif defined ( __ICCARM__ )
|
||||
/* ICCARM Compiler
|
||||
---------------
|
||||
RAM functions are defined using a specific toolchain keyword "__ramfunc".
|
||||
*/
|
||||
#define __RAM_FUNC __ramfunc
|
||||
|
||||
#elif defined ( __GNUC__ )
|
||||
/* GNU Compiler
|
||||
------------
|
||||
RAM functions are defined using a specific toolchain attribute
|
||||
"__attribute__((section(".RamFunc")))".
|
||||
*/
|
||||
#define __RAM_FUNC __attribute__((section(".RamFunc")))
|
||||
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief __NOINLINE definition
|
||||
*/
|
||||
#if defined ( __CC_ARM ) || (defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)) || defined ( __GNUC__ )
|
||||
/* ARM V4/V5 and V6 & GNU Compiler
|
||||
-------------------------------
|
||||
*/
|
||||
#define __NOINLINE __attribute__ ( (noinline) )
|
||||
|
||||
#elif defined ( __ICCARM__ )
|
||||
/* ICCARM Compiler
|
||||
---------------
|
||||
*/
|
||||
#define __NOINLINE _Pragma("optimize = no_inline")
|
||||
|
||||
#endif
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* ___STM32F4xx_HAL_DEF */
|
||||
|
||||
|
||||
|
|
|
|||
File diff suppressed because it is too large
Load diff
|
|
@ -1,104 +1,102 @@
|
|||
/**
|
||||
******************************************************************************
|
||||
* @file stm32f4xx_hal_dma_ex.h
|
||||
* @author MCD Application Team
|
||||
* @brief Header file of DMA HAL extension module.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* <h2><center>© Copyright (c) 2017 STMicroelectronics.
|
||||
* All rights reserved.</center></h2>
|
||||
*
|
||||
* This software component is licensed by ST under BSD 3-Clause license,
|
||||
* the "License"; You may not use this file except in compliance with the
|
||||
* License. You may obtain a copy of the License at:
|
||||
* opensource.org/licenses/BSD-3-Clause
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef __STM32F4xx_HAL_DMA_EX_H
|
||||
#define __STM32F4xx_HAL_DMA_EX_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "stm32f4xx_hal_def.h"
|
||||
|
||||
/** @addtogroup STM32F4xx_HAL_Driver
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup DMAEx
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* Exported types ------------------------------------------------------------*/
|
||||
/** @defgroup DMAEx_Exported_Types DMAEx Exported Types
|
||||
* @brief DMAEx Exported types
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief HAL DMA Memory definition
|
||||
*/
|
||||
typedef enum
|
||||
{
|
||||
MEMORY0 = 0x00U, /*!< Memory 0 */
|
||||
MEMORY1 = 0x01U /*!< Memory 1 */
|
||||
}HAL_DMA_MemoryTypeDef;
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported functions --------------------------------------------------------*/
|
||||
/** @defgroup DMAEx_Exported_Functions DMAEx Exported Functions
|
||||
* @brief DMAEx Exported functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup DMAEx_Exported_Functions_Group1 Extended features functions
|
||||
* @brief Extended features functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* IO operation functions *******************************************************/
|
||||
HAL_StatusTypeDef HAL_DMAEx_MultiBufferStart(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t SecondMemAddress, uint32_t DataLength);
|
||||
HAL_StatusTypeDef HAL_DMAEx_MultiBufferStart_IT(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t SecondMemAddress, uint32_t DataLength);
|
||||
HAL_StatusTypeDef HAL_DMAEx_ChangeMemory(DMA_HandleTypeDef *hdma, uint32_t Address, HAL_DMA_MemoryTypeDef memory);
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Private functions ---------------------------------------------------------*/
|
||||
/** @defgroup DMAEx_Private_Functions DMAEx Private Functions
|
||||
* @brief DMAEx Private functions
|
||||
* @{
|
||||
*/
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /*__STM32F4xx_HAL_DMA_EX_H*/
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file stm32f4xx_hal_dma_ex.h
|
||||
* @author MCD Application Team
|
||||
* @brief Header file of DMA HAL extension module.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* Copyright (c) 2017 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software is licensed under terms that can be found in the LICENSE file in
|
||||
* the root directory of this software component.
|
||||
* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef __STM32F4xx_HAL_DMA_EX_H
|
||||
#define __STM32F4xx_HAL_DMA_EX_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "stm32f4xx_hal_def.h"
|
||||
|
||||
/** @addtogroup STM32F4xx_HAL_Driver
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup DMAEx
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* Exported types ------------------------------------------------------------*/
|
||||
/** @defgroup DMAEx_Exported_Types DMAEx Exported Types
|
||||
* @brief DMAEx Exported types
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief HAL DMA Memory definition
|
||||
*/
|
||||
typedef enum
|
||||
{
|
||||
MEMORY0 = 0x00U, /*!< Memory 0 */
|
||||
MEMORY1 = 0x01U /*!< Memory 1 */
|
||||
}HAL_DMA_MemoryTypeDef;
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported functions --------------------------------------------------------*/
|
||||
/** @defgroup DMAEx_Exported_Functions DMAEx Exported Functions
|
||||
* @brief DMAEx Exported functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup DMAEx_Exported_Functions_Group1 Extended features functions
|
||||
* @brief Extended features functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* IO operation functions *******************************************************/
|
||||
HAL_StatusTypeDef HAL_DMAEx_MultiBufferStart(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t SecondMemAddress, uint32_t DataLength);
|
||||
HAL_StatusTypeDef HAL_DMAEx_MultiBufferStart_IT(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t SecondMemAddress, uint32_t DataLength);
|
||||
HAL_StatusTypeDef HAL_DMAEx_ChangeMemory(DMA_HandleTypeDef *hdma, uint32_t Address, HAL_DMA_MemoryTypeDef memory);
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Private functions ---------------------------------------------------------*/
|
||||
/** @defgroup DMAEx_Private_Functions DMAEx Private Functions
|
||||
* @brief DMAEx Private functions
|
||||
* @{
|
||||
*/
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /*__STM32F4xx_HAL_DMA_EX_H*/
|
||||
|
||||
|
|
|
|||
|
|
@ -1,264 +1,366 @@
|
|||
/**
|
||||
******************************************************************************
|
||||
* @file stm32f4xx_hal_exti.h
|
||||
* @author MCD Application Team
|
||||
* @brief Header file of EXTI HAL module.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* <h2><center>© Copyright (c) 2018 STMicroelectronics.
|
||||
* All rights reserved.</center></h2>
|
||||
*
|
||||
* This software component is licensed by ST under BSD 3-Clause license,
|
||||
* the "License"; You may not use this file except in compliance with the
|
||||
* License. You may obtain a copy of the License at:
|
||||
* opensource.org/licenses/BSD-3-Clause
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef STM32f4xx_HAL_EXTI_H
|
||||
#define STM32f4xx_HAL_EXTI_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "stm32f4xx_hal_def.h"
|
||||
|
||||
/** @addtogroup STM32F4xx_HAL_Driver
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup EXTI EXTI
|
||||
* @brief EXTI HAL module driver
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* Exported types ------------------------------------------------------------*/
|
||||
|
||||
/** @defgroup EXTI_Exported_Types EXTI Exported Types
|
||||
* @{
|
||||
*/
|
||||
typedef enum
|
||||
{
|
||||
HAL_EXTI_COMMON_CB_ID = 0x00U,
|
||||
HAL_EXTI_RISING_CB_ID = 0x01U,
|
||||
HAL_EXTI_FALLING_CB_ID = 0x02U,
|
||||
} EXTI_CallbackIDTypeDef;
|
||||
|
||||
/**
|
||||
* @brief EXTI Handle structure definition
|
||||
*/
|
||||
typedef struct
|
||||
{
|
||||
uint32_t Line; /*!< Exti line number */
|
||||
void (* RisingCallback)(void); /*!< Exti rising callback */
|
||||
void (* FallingCallback)(void); /*!< Exti falling callback */
|
||||
} EXTI_HandleTypeDef;
|
||||
|
||||
/**
|
||||
* @brief EXTI Configuration structure definition
|
||||
*/
|
||||
typedef struct
|
||||
{
|
||||
uint32_t Line; /*!< The Exti line to be configured. This parameter
|
||||
can be a value of @ref EXTI_Line */
|
||||
uint32_t Mode; /*!< The Exit Mode to be configured for a core.
|
||||
This parameter can be a combination of @ref EXTI_Mode */
|
||||
uint32_t Trigger; /*!< The Exti Trigger to be configured. This parameter
|
||||
can be a value of @ref EXTI_Trigger */
|
||||
} EXTI_ConfigTypeDef;
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported constants --------------------------------------------------------*/
|
||||
/** @defgroup EXTI_Exported_Constants EXTI Exported Constants
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup EXTI_Line EXTI Line
|
||||
* @{
|
||||
*/
|
||||
#define EXTI_LINE_0 EXTI_IMR_IM0 /*!< External interrupt line 0 */
|
||||
#define EXTI_LINE_1 EXTI_IMR_IM1 /*!< External interrupt line 1 */
|
||||
#define EXTI_LINE_2 EXTI_IMR_IM2 /*!< External interrupt line 2 */
|
||||
#define EXTI_LINE_3 EXTI_IMR_IM3 /*!< External interrupt line 3 */
|
||||
#define EXTI_LINE_4 EXTI_IMR_IM4 /*!< External interrupt line 4 */
|
||||
#define EXTI_LINE_5 EXTI_IMR_IM5 /*!< External interrupt line 5 */
|
||||
#define EXTI_LINE_6 EXTI_IMR_IM6 /*!< External interrupt line 6 */
|
||||
#define EXTI_LINE_7 EXTI_IMR_IM7 /*!< External interrupt line 7 */
|
||||
#define EXTI_LINE_8 EXTI_IMR_IM8 /*!< External interrupt line 8 */
|
||||
#define EXTI_LINE_9 EXTI_IMR_IM9 /*!< External interrupt line 9 */
|
||||
#define EXTI_LINE_10 EXTI_IMR_IM10 /*!< External interrupt line 10 */
|
||||
#define EXTI_LINE_11 EXTI_IMR_IM11 /*!< External interrupt line 11 */
|
||||
#define EXTI_LINE_12 EXTI_IMR_IM12 /*!< External interrupt line 12 */
|
||||
#define EXTI_LINE_13 EXTI_IMR_IM13 /*!< External interrupt line 13 */
|
||||
#define EXTI_LINE_14 EXTI_IMR_IM14 /*!< External interrupt line 14 */
|
||||
#define EXTI_LINE_15 EXTI_IMR_IM15 /*!< External interrupt line 15 */
|
||||
#define EXTI_LINE_16 EXTI_IMR_IM16 /*!< External interrupt line 16 Connected to the PVD Output */
|
||||
#define EXTI_LINE_17 EXTI_IMR_IM17 /*!< External interrupt line 17 Connected to the RTC Alarm event */
|
||||
#define EXTI_LINE_18 EXTI_IMR_IM18 /*!< External interrupt line 18 Connected to the USB OTG FS Wakeup from suspend event */
|
||||
#define EXTI_LINE_19 EXTI_IMR_IM19 /*!< External interrupt line 19 Connected to the Ethernet Wakeup event */
|
||||
#define EXTI_LINE_20 EXTI_IMR_IM20 /*!< External interrupt line 20 Connected to the USB OTG HS (configured in FS) Wakeup event */
|
||||
#define EXTI_LINE_21 EXTI_IMR_IM21 /*!< External interrupt line 21 Connected to the RTC Tamper and Time Stamp events */
|
||||
#define EXTI_LINE_22 EXTI_IMR_IM22 /*!< External interrupt line 22 Connected to the RTC Wakeup event */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup EXTI_Mode EXTI Mode
|
||||
* @{
|
||||
*/
|
||||
#define EXTI_MODE_INTERRUPT 0x00000000U
|
||||
#define EXTI_MODE_EVENT 0x00000004U
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup EXTI_Trigger EXTI Trigger
|
||||
* @{
|
||||
*/
|
||||
|
||||
#define EXTI_TRIGGER_RISING 0x00000008U
|
||||
#define EXTI_TRIGGER_FALLING 0x0000000CU
|
||||
#define EXTI_TRIGGER_RISING_FALLING 0x00000010U
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported macro ------------------------------------------------------------*/
|
||||
/** @defgroup EXTI_Exported_Macros EXTI Exported Macros
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Private constants --------------------------------------------------------*/
|
||||
/** @defgroup EXTI_Private_Constants EXTI Private Constants
|
||||
* @{
|
||||
*/
|
||||
/**
|
||||
* @brief EXTI Mask for interrupt & event mode
|
||||
*/
|
||||
#define EXTI_MODE_MASK (EXTI_MODE_EVENT | EXTI_MODE_INTERRUPT)
|
||||
|
||||
/**
|
||||
* @brief EXTI Mask for trigger possibilities
|
||||
*/
|
||||
#define EXTI_TRIGGER_MASK (EXTI_TRIGGER_RISING | EXTI_TRIGGER_FALLING | EXTI_TRIGGER_RISING_FALLING)
|
||||
|
||||
/**
|
||||
* @brief EXTI Line number
|
||||
*/
|
||||
#define EXTI_LINE_NB 23UL
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Private macros ------------------------------------------------------------*/
|
||||
/** @defgroup EXTI_Private_Macros EXTI Private Macros
|
||||
* @{
|
||||
*/
|
||||
#define IS_EXTI_LINE(__LINE__) (((__LINE__) == EXTI_LINE_0) || \
|
||||
((__LINE__) == EXTI_LINE_1) || \
|
||||
((__LINE__) == EXTI_LINE_2) || \
|
||||
((__LINE__) == EXTI_LINE_3) || \
|
||||
((__LINE__) == EXTI_LINE_4) || \
|
||||
((__LINE__) == EXTI_LINE_5) || \
|
||||
((__LINE__) == EXTI_LINE_6) || \
|
||||
((__LINE__) == EXTI_LINE_7) || \
|
||||
((__LINE__) == EXTI_LINE_8) || \
|
||||
((__LINE__) == EXTI_LINE_9) || \
|
||||
((__LINE__) == EXTI_LINE_10) || \
|
||||
((__LINE__) == EXTI_LINE_11) || \
|
||||
((__LINE__) == EXTI_LINE_12) || \
|
||||
((__LINE__) == EXTI_LINE_13) || \
|
||||
((__LINE__) == EXTI_LINE_14) || \
|
||||
((__LINE__) == EXTI_LINE_15) || \
|
||||
((__LINE__) == EXTI_LINE_16) || \
|
||||
((__LINE__) == EXTI_LINE_17) || \
|
||||
((__LINE__) == EXTI_LINE_18) || \
|
||||
((__LINE__) == EXTI_LINE_19) || \
|
||||
((__LINE__) == EXTI_LINE_20) || \
|
||||
((__LINE__) == EXTI_LINE_21) || \
|
||||
((__LINE__) == EXTI_LINE_22))
|
||||
|
||||
#define IS_EXTI_MODE(__LINE__) ((((__LINE__) & ~EXTI_MODE_MASK) == 0x00U))
|
||||
|
||||
#define IS_EXTI_TRIGGER(__LINE__) (((__LINE__) & ~EXTI_TRIGGER_MASK) == 0x00U)
|
||||
|
||||
#define IS_EXTI_PENDING_EDGE(__LINE__) (((__LINE__) == EXTI_TRIGGER_FALLING) || \
|
||||
((__LINE__) == EXTI_TRIGGER_RISING) || \
|
||||
((__LINE__) == EXTI_TRIGGER_RISING_FALLING))
|
||||
|
||||
#define IS_EXTI_GPIO_PIN(__PIN__) ((__PIN__) < 16U)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported functions --------------------------------------------------------*/
|
||||
/** @defgroup EXTI_Exported_Functions EXTI Exported Functions
|
||||
* @brief EXTI Exported Functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup EXTI_Exported_Functions_Group1 Configuration functions
|
||||
* @brief Configuration functions
|
||||
* @{
|
||||
*/
|
||||
/* Configuration functions ****************************************************/
|
||||
HAL_StatusTypeDef HAL_EXTI_SetConfigLine(EXTI_HandleTypeDef *hexti, EXTI_ConfigTypeDef *pExtiConfig);
|
||||
HAL_StatusTypeDef HAL_EXTI_GetConfigLine(EXTI_HandleTypeDef *hexti, EXTI_ConfigTypeDef *pExtiConfig);
|
||||
HAL_StatusTypeDef HAL_EXTI_ClearConfigLine(EXTI_HandleTypeDef *hexti);
|
||||
HAL_StatusTypeDef HAL_EXTI_RegisterCallback(EXTI_HandleTypeDef *hexti, EXTI_CallbackIDTypeDef CallbackID, void (*pPendingCbfn)(void));
|
||||
HAL_StatusTypeDef HAL_EXTI_GetHandle(EXTI_HandleTypeDef *hexti, uint32_t ExtiLine);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup EXTI_Exported_Functions_Group2 IO operation functions
|
||||
* @brief IO operation functions
|
||||
* @{
|
||||
*/
|
||||
/* IO operation functions *****************************************************/
|
||||
void HAL_EXTI_IRQHandler(EXTI_HandleTypeDef *hexti);
|
||||
uint32_t HAL_EXTI_GetPending(EXTI_HandleTypeDef *hexti, uint32_t Edge);
|
||||
void HAL_EXTI_ClearPending(EXTI_HandleTypeDef *hexti, uint32_t Edge);
|
||||
void HAL_EXTI_GenerateSWI(EXTI_HandleTypeDef *hexti);
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* STM32f4xx_HAL_EXTI_H */
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file stm32f4xx_hal_exti.h
|
||||
* @author MCD Application Team
|
||||
* @brief Header file of EXTI HAL module.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* Copyright (c) 2018 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software is licensed under terms that can be found in the LICENSE file
|
||||
* in the root directory of this software component.
|
||||
* If no LICENSE file comes with this software, it is provided AS-IS.Clause
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef STM32f4xx_HAL_EXTI_H
|
||||
#define STM32f4xx_HAL_EXTI_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "stm32f4xx_hal_def.h"
|
||||
|
||||
/** @addtogroup STM32F4xx_HAL_Driver
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup EXTI EXTI
|
||||
* @brief EXTI HAL module driver
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* Exported types ------------------------------------------------------------*/
|
||||
|
||||
/** @defgroup EXTI_Exported_Types EXTI Exported Types
|
||||
* @{
|
||||
*/
|
||||
typedef enum
|
||||
{
|
||||
HAL_EXTI_COMMON_CB_ID = 0x00U
|
||||
} EXTI_CallbackIDTypeDef;
|
||||
|
||||
/**
|
||||
* @brief EXTI Handle structure definition
|
||||
*/
|
||||
typedef struct
|
||||
{
|
||||
uint32_t Line; /*!< Exti line number */
|
||||
void (* PendingCallback)(void); /*!< Exti pending callback */
|
||||
} EXTI_HandleTypeDef;
|
||||
|
||||
/**
|
||||
* @brief EXTI Configuration structure definition
|
||||
*/
|
||||
typedef struct
|
||||
{
|
||||
uint32_t Line; /*!< The Exti line to be configured. This parameter
|
||||
can be a value of @ref EXTI_Line */
|
||||
uint32_t Mode; /*!< The Exit Mode to be configured for a core.
|
||||
This parameter can be a combination of @ref EXTI_Mode */
|
||||
uint32_t Trigger; /*!< The Exti Trigger to be configured. This parameter
|
||||
can be a value of @ref EXTI_Trigger */
|
||||
uint32_t GPIOSel; /*!< The Exti GPIO multiplexer selection to be configured.
|
||||
This parameter is only possible for line 0 to 15. It
|
||||
can be a value of @ref EXTI_GPIOSel */
|
||||
} EXTI_ConfigTypeDef;
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported constants --------------------------------------------------------*/
|
||||
/** @defgroup EXTI_Exported_Constants EXTI Exported Constants
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup EXTI_Line EXTI Line
|
||||
* @{
|
||||
*/
|
||||
#define EXTI_LINE_0 (EXTI_GPIO | 0x00u) /*!< External interrupt line 0 */
|
||||
#define EXTI_LINE_1 (EXTI_GPIO | 0x01u) /*!< External interrupt line 1 */
|
||||
#define EXTI_LINE_2 (EXTI_GPIO | 0x02u) /*!< External interrupt line 2 */
|
||||
#define EXTI_LINE_3 (EXTI_GPIO | 0x03u) /*!< External interrupt line 3 */
|
||||
#define EXTI_LINE_4 (EXTI_GPIO | 0x04u) /*!< External interrupt line 4 */
|
||||
#define EXTI_LINE_5 (EXTI_GPIO | 0x05u) /*!< External interrupt line 5 */
|
||||
#define EXTI_LINE_6 (EXTI_GPIO | 0x06u) /*!< External interrupt line 6 */
|
||||
#define EXTI_LINE_7 (EXTI_GPIO | 0x07u) /*!< External interrupt line 7 */
|
||||
#define EXTI_LINE_8 (EXTI_GPIO | 0x08u) /*!< External interrupt line 8 */
|
||||
#define EXTI_LINE_9 (EXTI_GPIO | 0x09u) /*!< External interrupt line 9 */
|
||||
#define EXTI_LINE_10 (EXTI_GPIO | 0x0Au) /*!< External interrupt line 10 */
|
||||
#define EXTI_LINE_11 (EXTI_GPIO | 0x0Bu) /*!< External interrupt line 11 */
|
||||
#define EXTI_LINE_12 (EXTI_GPIO | 0x0Cu) /*!< External interrupt line 12 */
|
||||
#define EXTI_LINE_13 (EXTI_GPIO | 0x0Du) /*!< External interrupt line 13 */
|
||||
#define EXTI_LINE_14 (EXTI_GPIO | 0x0Eu) /*!< External interrupt line 14 */
|
||||
#define EXTI_LINE_15 (EXTI_GPIO | 0x0Fu) /*!< External interrupt line 15 */
|
||||
#define EXTI_LINE_16 (EXTI_CONFIG | 0x10u) /*!< External interrupt line 16 Connected to the PVD Output */
|
||||
#define EXTI_LINE_17 (EXTI_CONFIG | 0x11u) /*!< External interrupt line 17 Connected to the RTC Alarm event */
|
||||
#if defined(EXTI_IMR_IM18)
|
||||
#define EXTI_LINE_18 (EXTI_CONFIG | 0x12u) /*!< External interrupt line 18 Connected to the USB OTG FS Wakeup from suspend event */
|
||||
#else
|
||||
#define EXTI_LINE_18 (EXTI_RESERVED | 0x12u) /*!< No interrupt supported in this line */
|
||||
#endif /* EXTI_IMR_IM18 */
|
||||
#if defined(EXTI_IMR_IM19)
|
||||
#define EXTI_LINE_19 (EXTI_CONFIG | 0x13u) /*!< External interrupt line 19 Connected to the Ethernet Wakeup event */
|
||||
#else
|
||||
#define EXTI_LINE_19 (EXTI_RESERVED | 0x13u) /*!< No interrupt supported in this line */
|
||||
#endif /* EXTI_IMR_IM19 */
|
||||
#if defined(EXTI_IMR_IM20)
|
||||
#define EXTI_LINE_20 (EXTI_CONFIG | 0x14u) /*!< External interrupt line 20 Connected to the USB OTG HS (configured in FS) Wakeup event */
|
||||
#else
|
||||
#define EXTI_LINE_20 (EXTI_RESERVED | 0x14u) /*!< No interrupt supported in this line */
|
||||
#endif /* EXTI_IMR_IM20 */
|
||||
#define EXTI_LINE_21 (EXTI_CONFIG | 0x15u) /*!< External interrupt line 21 Connected to the RTC Tamper and Time Stamp events */
|
||||
#define EXTI_LINE_22 (EXTI_CONFIG | 0x16u) /*!< External interrupt line 22 Connected to the RTC Wakeup event */
|
||||
#if defined(EXTI_IMR_IM23)
|
||||
#define EXTI_LINE_23 (EXTI_CONFIG | 0x17u) /*!< External interrupt line 23 Connected to the LPTIM1 asynchronous event */
|
||||
#endif /* EXTI_IMR_IM23 */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup EXTI_Mode EXTI Mode
|
||||
* @{
|
||||
*/
|
||||
#define EXTI_MODE_NONE 0x00000000u
|
||||
#define EXTI_MODE_INTERRUPT 0x00000001u
|
||||
#define EXTI_MODE_EVENT 0x00000002u
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup EXTI_Trigger EXTI Trigger
|
||||
* @{
|
||||
*/
|
||||
|
||||
#define EXTI_TRIGGER_NONE 0x00000000u
|
||||
#define EXTI_TRIGGER_RISING 0x00000001u
|
||||
#define EXTI_TRIGGER_FALLING 0x00000002u
|
||||
#define EXTI_TRIGGER_RISING_FALLING (EXTI_TRIGGER_RISING | EXTI_TRIGGER_FALLING)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup EXTI_GPIOSel EXTI GPIOSel
|
||||
* @brief
|
||||
* @{
|
||||
*/
|
||||
#define EXTI_GPIOA 0x00000000u
|
||||
#define EXTI_GPIOB 0x00000001u
|
||||
#define EXTI_GPIOC 0x00000002u
|
||||
#if defined (GPIOD)
|
||||
#define EXTI_GPIOD 0x00000003u
|
||||
#endif /* GPIOD */
|
||||
#if defined (GPIOE)
|
||||
#define EXTI_GPIOE 0x00000004u
|
||||
#endif /* GPIOE */
|
||||
#if defined (GPIOF)
|
||||
#define EXTI_GPIOF 0x00000005u
|
||||
#endif /* GPIOF */
|
||||
#if defined (GPIOG)
|
||||
#define EXTI_GPIOG 0x00000006u
|
||||
#endif /* GPIOG */
|
||||
#if defined (GPIOH)
|
||||
#define EXTI_GPIOH 0x00000007u
|
||||
#endif /* GPIOH */
|
||||
#if defined (GPIOI)
|
||||
#define EXTI_GPIOI 0x00000008u
|
||||
#endif /* GPIOI */
|
||||
#if defined (GPIOJ)
|
||||
#define EXTI_GPIOJ 0x00000009u
|
||||
#endif /* GPIOJ */
|
||||
#if defined (GPIOK)
|
||||
#define EXTI_GPIOK 0x0000000Au
|
||||
#endif /* GPIOK */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported macro ------------------------------------------------------------*/
|
||||
/** @defgroup EXTI_Exported_Macros EXTI Exported Macros
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Private constants --------------------------------------------------------*/
|
||||
/** @defgroup EXTI_Private_Constants EXTI Private Constants
|
||||
* @{
|
||||
*/
|
||||
/**
|
||||
* @brief EXTI Line property definition
|
||||
*/
|
||||
#define EXTI_PROPERTY_SHIFT 24u
|
||||
#define EXTI_CONFIG (0x02uL << EXTI_PROPERTY_SHIFT)
|
||||
#define EXTI_GPIO ((0x04uL << EXTI_PROPERTY_SHIFT) | EXTI_CONFIG)
|
||||
#define EXTI_RESERVED (0x08uL << EXTI_PROPERTY_SHIFT)
|
||||
#define EXTI_PROPERTY_MASK (EXTI_CONFIG | EXTI_GPIO)
|
||||
|
||||
/**
|
||||
* @brief EXTI bit usage
|
||||
*/
|
||||
#define EXTI_PIN_MASK 0x0000001Fu
|
||||
|
||||
/**
|
||||
* @brief EXTI Mask for interrupt & event mode
|
||||
*/
|
||||
#define EXTI_MODE_MASK (EXTI_MODE_EVENT | EXTI_MODE_INTERRUPT)
|
||||
|
||||
/**
|
||||
* @brief EXTI Mask for trigger possibilities
|
||||
*/
|
||||
#define EXTI_TRIGGER_MASK (EXTI_TRIGGER_RISING | EXTI_TRIGGER_FALLING)
|
||||
|
||||
/**
|
||||
* @brief EXTI Line number
|
||||
*/
|
||||
#if defined(EXTI_IMR_IM23)
|
||||
#define EXTI_LINE_NB 24UL
|
||||
#else
|
||||
#define EXTI_LINE_NB 23UL
|
||||
#endif /* EXTI_IMR_IM23 */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Private macros ------------------------------------------------------------*/
|
||||
/** @defgroup EXTI_Private_Macros EXTI Private Macros
|
||||
* @{
|
||||
*/
|
||||
#define IS_EXTI_LINE(__EXTI_LINE__) ((((__EXTI_LINE__) & ~(EXTI_PROPERTY_MASK | EXTI_PIN_MASK)) == 0x00u) && \
|
||||
((((__EXTI_LINE__) & EXTI_PROPERTY_MASK) == EXTI_CONFIG) || \
|
||||
(((__EXTI_LINE__) & EXTI_PROPERTY_MASK) == EXTI_GPIO)) && \
|
||||
(((__EXTI_LINE__) & EXTI_PIN_MASK) < EXTI_LINE_NB))
|
||||
|
||||
#define IS_EXTI_MODE(__EXTI_LINE__) ((((__EXTI_LINE__) & EXTI_MODE_MASK) != 0x00u) && \
|
||||
(((__EXTI_LINE__) & ~EXTI_MODE_MASK) == 0x00u))
|
||||
|
||||
#define IS_EXTI_TRIGGER(__EXTI_LINE__) (((__EXTI_LINE__) & ~EXTI_TRIGGER_MASK) == 0x00u)
|
||||
|
||||
#define IS_EXTI_PENDING_EDGE(__EXTI_LINE__) ((__EXTI_LINE__) == EXTI_TRIGGER_RISING_FALLING)
|
||||
|
||||
#define IS_EXTI_CONFIG_LINE(__EXTI_LINE__) (((__EXTI_LINE__) & EXTI_CONFIG) != 0x00u)
|
||||
|
||||
#if !defined (GPIOD)
|
||||
#define IS_EXTI_GPIO_PORT(__PORT__) (((__PORT__) == EXTI_GPIOA) || \
|
||||
((__PORT__) == EXTI_GPIOB) || \
|
||||
((__PORT__) == EXTI_GPIOC) || \
|
||||
((__PORT__) == EXTI_GPIOH))
|
||||
#elif !defined (GPIOE)
|
||||
#define IS_EXTI_GPIO_PORT(__PORT__) (((__PORT__) == EXTI_GPIOA) || \
|
||||
((__PORT__) == EXTI_GPIOB) || \
|
||||
((__PORT__) == EXTI_GPIOC) || \
|
||||
((__PORT__) == EXTI_GPIOD) || \
|
||||
((__PORT__) == EXTI_GPIOH))
|
||||
#elif !defined (GPIOF)
|
||||
#define IS_EXTI_GPIO_PORT(__PORT__) (((__PORT__) == EXTI_GPIOA) || \
|
||||
((__PORT__) == EXTI_GPIOB) || \
|
||||
((__PORT__) == EXTI_GPIOC) || \
|
||||
((__PORT__) == EXTI_GPIOD) || \
|
||||
((__PORT__) == EXTI_GPIOE) || \
|
||||
((__PORT__) == EXTI_GPIOH))
|
||||
#elif !defined (GPIOI)
|
||||
#define IS_EXTI_GPIO_PORT(__PORT__) (((__PORT__) == EXTI_GPIOA) || \
|
||||
((__PORT__) == EXTI_GPIOB) || \
|
||||
((__PORT__) == EXTI_GPIOC) || \
|
||||
((__PORT__) == EXTI_GPIOD) || \
|
||||
((__PORT__) == EXTI_GPIOE) || \
|
||||
((__PORT__) == EXTI_GPIOF) || \
|
||||
((__PORT__) == EXTI_GPIOG) || \
|
||||
((__PORT__) == EXTI_GPIOH))
|
||||
#elif !defined (GPIOJ)
|
||||
#define IS_EXTI_GPIO_PORT(__PORT__) (((__PORT__) == EXTI_GPIOA) || \
|
||||
((__PORT__) == EXTI_GPIOB) || \
|
||||
((__PORT__) == EXTI_GPIOC) || \
|
||||
((__PORT__) == EXTI_GPIOD) || \
|
||||
((__PORT__) == EXTI_GPIOE) || \
|
||||
((__PORT__) == EXTI_GPIOF) || \
|
||||
((__PORT__) == EXTI_GPIOG) || \
|
||||
((__PORT__) == EXTI_GPIOH) || \
|
||||
((__PORT__) == EXTI_GPIOI))
|
||||
#else
|
||||
#define IS_EXTI_GPIO_PORT(__PORT__) (((__PORT__) == EXTI_GPIOA) || \
|
||||
((__PORT__) == EXTI_GPIOB) || \
|
||||
((__PORT__) == EXTI_GPIOC) || \
|
||||
((__PORT__) == EXTI_GPIOD) || \
|
||||
((__PORT__) == EXTI_GPIOE) || \
|
||||
((__PORT__) == EXTI_GPIOF) || \
|
||||
((__PORT__) == EXTI_GPIOG) || \
|
||||
((__PORT__) == EXTI_GPIOH) || \
|
||||
((__PORT__) == EXTI_GPIOI) || \
|
||||
((__PORT__) == EXTI_GPIOJ) || \
|
||||
((__PORT__) == EXTI_GPIOK))
|
||||
#endif /* GPIOD */
|
||||
|
||||
#define IS_EXTI_GPIO_PIN(__PIN__) ((__PIN__) < 16U)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported functions --------------------------------------------------------*/
|
||||
/** @defgroup EXTI_Exported_Functions EXTI Exported Functions
|
||||
* @brief EXTI Exported Functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup EXTI_Exported_Functions_Group1 Configuration functions
|
||||
* @brief Configuration functions
|
||||
* @{
|
||||
*/
|
||||
/* Configuration functions ****************************************************/
|
||||
HAL_StatusTypeDef HAL_EXTI_SetConfigLine(EXTI_HandleTypeDef *hexti, EXTI_ConfigTypeDef *pExtiConfig);
|
||||
HAL_StatusTypeDef HAL_EXTI_GetConfigLine(EXTI_HandleTypeDef *hexti, EXTI_ConfigTypeDef *pExtiConfig);
|
||||
HAL_StatusTypeDef HAL_EXTI_ClearConfigLine(EXTI_HandleTypeDef *hexti);
|
||||
HAL_StatusTypeDef HAL_EXTI_RegisterCallback(EXTI_HandleTypeDef *hexti, EXTI_CallbackIDTypeDef CallbackID, void (*pPendingCbfn)(void));
|
||||
HAL_StatusTypeDef HAL_EXTI_GetHandle(EXTI_HandleTypeDef *hexti, uint32_t ExtiLine);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup EXTI_Exported_Functions_Group2 IO operation functions
|
||||
* @brief IO operation functions
|
||||
* @{
|
||||
*/
|
||||
/* IO operation functions *****************************************************/
|
||||
void HAL_EXTI_IRQHandler(EXTI_HandleTypeDef *hexti);
|
||||
uint32_t HAL_EXTI_GetPending(EXTI_HandleTypeDef *hexti, uint32_t Edge);
|
||||
void HAL_EXTI_ClearPending(EXTI_HandleTypeDef *hexti, uint32_t Edge);
|
||||
void HAL_EXTI_GenerateSWI(EXTI_HandleTypeDef *hexti);
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* STM32f4xx_HAL_EXTI_H */
|
||||
|
||||
|
|
|
|||
|
|
@ -1,428 +1,425 @@
|
|||
/**
|
||||
******************************************************************************
|
||||
* @file stm32f4xx_hal_flash.h
|
||||
* @author MCD Application Team
|
||||
* @brief Header file of FLASH HAL module.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* <h2><center>© Copyright (c) 2017 STMicroelectronics.
|
||||
* All rights reserved.</center></h2>
|
||||
*
|
||||
* This software component is licensed by ST under BSD 3-Clause license,
|
||||
* the "License"; You may not use this file except in compliance with the
|
||||
* License. You may obtain a copy of the License at:
|
||||
* opensource.org/licenses/BSD-3-Clause
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef __STM32F4xx_HAL_FLASH_H
|
||||
#define __STM32F4xx_HAL_FLASH_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "stm32f4xx_hal_def.h"
|
||||
|
||||
/** @addtogroup STM32F4xx_HAL_Driver
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup FLASH
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* Exported types ------------------------------------------------------------*/
|
||||
/** @defgroup FLASH_Exported_Types FLASH Exported Types
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief FLASH Procedure structure definition
|
||||
*/
|
||||
typedef enum
|
||||
{
|
||||
FLASH_PROC_NONE = 0U,
|
||||
FLASH_PROC_SECTERASE,
|
||||
FLASH_PROC_MASSERASE,
|
||||
FLASH_PROC_PROGRAM
|
||||
} FLASH_ProcedureTypeDef;
|
||||
|
||||
/**
|
||||
* @brief FLASH handle Structure definition
|
||||
*/
|
||||
typedef struct
|
||||
{
|
||||
__IO FLASH_ProcedureTypeDef ProcedureOnGoing; /*Internal variable to indicate which procedure is ongoing or not in IT context*/
|
||||
|
||||
__IO uint32_t NbSectorsToErase; /*Internal variable to save the remaining sectors to erase in IT context*/
|
||||
|
||||
__IO uint8_t VoltageForErase; /*Internal variable to provide voltage range selected by user in IT context*/
|
||||
|
||||
__IO uint32_t Sector; /*Internal variable to define the current sector which is erasing*/
|
||||
|
||||
__IO uint32_t Bank; /*Internal variable to save current bank selected during mass erase*/
|
||||
|
||||
__IO uint32_t Address; /*Internal variable to save address selected for program*/
|
||||
|
||||
HAL_LockTypeDef Lock; /* FLASH locking object */
|
||||
|
||||
__IO uint32_t ErrorCode; /* FLASH error code */
|
||||
|
||||
}FLASH_ProcessTypeDef;
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported constants --------------------------------------------------------*/
|
||||
/** @defgroup FLASH_Exported_Constants FLASH Exported Constants
|
||||
* @{
|
||||
*/
|
||||
/** @defgroup FLASH_Error_Code FLASH Error Code
|
||||
* @brief FLASH Error Code
|
||||
* @{
|
||||
*/
|
||||
#define HAL_FLASH_ERROR_NONE 0x00000000U /*!< No error */
|
||||
#define HAL_FLASH_ERROR_RD 0x00000001U /*!< Read Protection error */
|
||||
#define HAL_FLASH_ERROR_PGS 0x00000002U /*!< Programming Sequence error */
|
||||
#define HAL_FLASH_ERROR_PGP 0x00000004U /*!< Programming Parallelism error */
|
||||
#define HAL_FLASH_ERROR_PGA 0x00000008U /*!< Programming Alignment error */
|
||||
#define HAL_FLASH_ERROR_WRP 0x00000010U /*!< Write protection error */
|
||||
#define HAL_FLASH_ERROR_OPERATION 0x00000020U /*!< Operation Error */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup FLASH_Type_Program FLASH Type Program
|
||||
* @{
|
||||
*/
|
||||
#define FLASH_TYPEPROGRAM_BYTE 0x00000000U /*!< Program byte (8-bit) at a specified address */
|
||||
#define FLASH_TYPEPROGRAM_HALFWORD 0x00000001U /*!< Program a half-word (16-bit) at a specified address */
|
||||
#define FLASH_TYPEPROGRAM_WORD 0x00000002U /*!< Program a word (32-bit) at a specified address */
|
||||
#define FLASH_TYPEPROGRAM_DOUBLEWORD 0x00000003U /*!< Program a double word (64-bit) at a specified address */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup FLASH_Flag_definition FLASH Flag definition
|
||||
* @brief Flag definition
|
||||
* @{
|
||||
*/
|
||||
#define FLASH_FLAG_EOP FLASH_SR_EOP /*!< FLASH End of Operation flag */
|
||||
#define FLASH_FLAG_OPERR FLASH_SR_SOP /*!< FLASH operation Error flag */
|
||||
#define FLASH_FLAG_WRPERR FLASH_SR_WRPERR /*!< FLASH Write protected error flag */
|
||||
#define FLASH_FLAG_PGAERR FLASH_SR_PGAERR /*!< FLASH Programming Alignment error flag */
|
||||
#define FLASH_FLAG_PGPERR FLASH_SR_PGPERR /*!< FLASH Programming Parallelism error flag */
|
||||
#define FLASH_FLAG_PGSERR FLASH_SR_PGSERR /*!< FLASH Programming Sequence error flag */
|
||||
#if defined(FLASH_SR_RDERR)
|
||||
#define FLASH_FLAG_RDERR FLASH_SR_RDERR /*!< Read Protection error flag (PCROP) */
|
||||
#endif /* FLASH_SR_RDERR */
|
||||
#define FLASH_FLAG_BSY FLASH_SR_BSY /*!< FLASH Busy flag */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup FLASH_Interrupt_definition FLASH Interrupt definition
|
||||
* @brief FLASH Interrupt definition
|
||||
* @{
|
||||
*/
|
||||
#define FLASH_IT_EOP FLASH_CR_EOPIE /*!< End of FLASH Operation Interrupt source */
|
||||
#define FLASH_IT_ERR 0x02000000U /*!< Error Interrupt source */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup FLASH_Program_Parallelism FLASH Program Parallelism
|
||||
* @{
|
||||
*/
|
||||
#define FLASH_PSIZE_BYTE 0x00000000U
|
||||
#define FLASH_PSIZE_HALF_WORD 0x00000100U
|
||||
#define FLASH_PSIZE_WORD 0x00000200U
|
||||
#define FLASH_PSIZE_DOUBLE_WORD 0x00000300U
|
||||
#define CR_PSIZE_MASK 0xFFFFFCFFU
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup FLASH_Keys FLASH Keys
|
||||
* @{
|
||||
*/
|
||||
#define RDP_KEY ((uint16_t)0x00A5)
|
||||
#define FLASH_KEY1 0x45670123U
|
||||
#define FLASH_KEY2 0xCDEF89ABU
|
||||
#define FLASH_OPT_KEY1 0x08192A3BU
|
||||
#define FLASH_OPT_KEY2 0x4C5D6E7FU
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported macro ------------------------------------------------------------*/
|
||||
/** @defgroup FLASH_Exported_Macros FLASH Exported Macros
|
||||
* @{
|
||||
*/
|
||||
/**
|
||||
* @brief Set the FLASH Latency.
|
||||
* @param __LATENCY__ FLASH Latency
|
||||
* The value of this parameter depend on device used within the same series
|
||||
* @retval none
|
||||
*/
|
||||
#define __HAL_FLASH_SET_LATENCY(__LATENCY__) (*(__IO uint8_t *)ACR_BYTE0_ADDRESS = (uint8_t)(__LATENCY__))
|
||||
|
||||
/**
|
||||
* @brief Get the FLASH Latency.
|
||||
* @retval FLASH Latency
|
||||
* The value of this parameter depend on device used within the same series
|
||||
*/
|
||||
#define __HAL_FLASH_GET_LATENCY() (READ_BIT((FLASH->ACR), FLASH_ACR_LATENCY))
|
||||
|
||||
/**
|
||||
* @brief Enable the FLASH prefetch buffer.
|
||||
* @retval none
|
||||
*/
|
||||
#define __HAL_FLASH_PREFETCH_BUFFER_ENABLE() (FLASH->ACR |= FLASH_ACR_PRFTEN)
|
||||
|
||||
/**
|
||||
* @brief Disable the FLASH prefetch buffer.
|
||||
* @retval none
|
||||
*/
|
||||
#define __HAL_FLASH_PREFETCH_BUFFER_DISABLE() (FLASH->ACR &= (~FLASH_ACR_PRFTEN))
|
||||
|
||||
/**
|
||||
* @brief Enable the FLASH instruction cache.
|
||||
* @retval none
|
||||
*/
|
||||
#define __HAL_FLASH_INSTRUCTION_CACHE_ENABLE() (FLASH->ACR |= FLASH_ACR_ICEN)
|
||||
|
||||
/**
|
||||
* @brief Disable the FLASH instruction cache.
|
||||
* @retval none
|
||||
*/
|
||||
#define __HAL_FLASH_INSTRUCTION_CACHE_DISABLE() (FLASH->ACR &= (~FLASH_ACR_ICEN))
|
||||
|
||||
/**
|
||||
* @brief Enable the FLASH data cache.
|
||||
* @retval none
|
||||
*/
|
||||
#define __HAL_FLASH_DATA_CACHE_ENABLE() (FLASH->ACR |= FLASH_ACR_DCEN)
|
||||
|
||||
/**
|
||||
* @brief Disable the FLASH data cache.
|
||||
* @retval none
|
||||
*/
|
||||
#define __HAL_FLASH_DATA_CACHE_DISABLE() (FLASH->ACR &= (~FLASH_ACR_DCEN))
|
||||
|
||||
/**
|
||||
* @brief Resets the FLASH instruction Cache.
|
||||
* @note This function must be used only when the Instruction Cache is disabled.
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_FLASH_INSTRUCTION_CACHE_RESET() do {FLASH->ACR |= FLASH_ACR_ICRST; \
|
||||
FLASH->ACR &= ~FLASH_ACR_ICRST; \
|
||||
}while(0U)
|
||||
|
||||
/**
|
||||
* @brief Resets the FLASH data Cache.
|
||||
* @note This function must be used only when the data Cache is disabled.
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_FLASH_DATA_CACHE_RESET() do {FLASH->ACR |= FLASH_ACR_DCRST; \
|
||||
FLASH->ACR &= ~FLASH_ACR_DCRST; \
|
||||
}while(0U)
|
||||
/**
|
||||
* @brief Enable the specified FLASH interrupt.
|
||||
* @param __INTERRUPT__ FLASH interrupt
|
||||
* This parameter can be any combination of the following values:
|
||||
* @arg FLASH_IT_EOP: End of FLASH Operation Interrupt
|
||||
* @arg FLASH_IT_ERR: Error Interrupt
|
||||
* @retval none
|
||||
*/
|
||||
#define __HAL_FLASH_ENABLE_IT(__INTERRUPT__) (FLASH->CR |= (__INTERRUPT__))
|
||||
|
||||
/**
|
||||
* @brief Disable the specified FLASH interrupt.
|
||||
* @param __INTERRUPT__ FLASH interrupt
|
||||
* This parameter can be any combination of the following values:
|
||||
* @arg FLASH_IT_EOP: End of FLASH Operation Interrupt
|
||||
* @arg FLASH_IT_ERR: Error Interrupt
|
||||
* @retval none
|
||||
*/
|
||||
#define __HAL_FLASH_DISABLE_IT(__INTERRUPT__) (FLASH->CR &= ~(uint32_t)(__INTERRUPT__))
|
||||
|
||||
/**
|
||||
* @brief Get the specified FLASH flag status.
|
||||
* @param __FLAG__ specifies the FLASH flags to check.
|
||||
* This parameter can be any combination of the following values:
|
||||
* @arg FLASH_FLAG_EOP : FLASH End of Operation flag
|
||||
* @arg FLASH_FLAG_OPERR : FLASH operation Error flag
|
||||
* @arg FLASH_FLAG_WRPERR: FLASH Write protected error flag
|
||||
* @arg FLASH_FLAG_PGAERR: FLASH Programming Alignment error flag
|
||||
* @arg FLASH_FLAG_PGPERR: FLASH Programming Parallelism error flag
|
||||
* @arg FLASH_FLAG_PGSERR: FLASH Programming Sequence error flag
|
||||
* @arg FLASH_FLAG_RDERR : FLASH Read Protection error flag (PCROP) (*)
|
||||
* @arg FLASH_FLAG_BSY : FLASH Busy flag
|
||||
* (*) FLASH_FLAG_RDERR is not available for STM32F405xx/407xx/415xx/417xx devices
|
||||
* @retval The new state of __FLAG__ (SET or RESET).
|
||||
*/
|
||||
#define __HAL_FLASH_GET_FLAG(__FLAG__) ((FLASH->SR & (__FLAG__)))
|
||||
|
||||
/**
|
||||
* @brief Clear the specified FLASH flags.
|
||||
* @param __FLAG__ specifies the FLASH flags to clear.
|
||||
* This parameter can be any combination of the following values:
|
||||
* @arg FLASH_FLAG_EOP : FLASH End of Operation flag
|
||||
* @arg FLASH_FLAG_OPERR : FLASH operation Error flag
|
||||
* @arg FLASH_FLAG_WRPERR: FLASH Write protected error flag
|
||||
* @arg FLASH_FLAG_PGAERR: FLASH Programming Alignment error flag
|
||||
* @arg FLASH_FLAG_PGPERR: FLASH Programming Parallelism error flag
|
||||
* @arg FLASH_FLAG_PGSERR: FLASH Programming Sequence error flag
|
||||
* @arg FLASH_FLAG_RDERR : FLASH Read Protection error flag (PCROP) (*)
|
||||
* (*) FLASH_FLAG_RDERR is not available for STM32F405xx/407xx/415xx/417xx devices
|
||||
* @retval none
|
||||
*/
|
||||
#define __HAL_FLASH_CLEAR_FLAG(__FLAG__) (FLASH->SR = (__FLAG__))
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Include FLASH HAL Extension module */
|
||||
#include "stm32f4xx_hal_flash_ex.h"
|
||||
#include "stm32f4xx_hal_flash_ramfunc.h"
|
||||
|
||||
/* Exported functions --------------------------------------------------------*/
|
||||
/** @addtogroup FLASH_Exported_Functions
|
||||
* @{
|
||||
*/
|
||||
/** @addtogroup FLASH_Exported_Functions_Group1
|
||||
* @{
|
||||
*/
|
||||
/* Program operation functions ***********************************************/
|
||||
HAL_StatusTypeDef HAL_FLASH_Program(uint32_t TypeProgram, uint32_t Address, uint64_t Data);
|
||||
HAL_StatusTypeDef HAL_FLASH_Program_IT(uint32_t TypeProgram, uint32_t Address, uint64_t Data);
|
||||
/* FLASH IRQ handler method */
|
||||
void HAL_FLASH_IRQHandler(void);
|
||||
/* Callbacks in non blocking modes */
|
||||
void HAL_FLASH_EndOfOperationCallback(uint32_t ReturnValue);
|
||||
void HAL_FLASH_OperationErrorCallback(uint32_t ReturnValue);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup FLASH_Exported_Functions_Group2
|
||||
* @{
|
||||
*/
|
||||
/* Peripheral Control functions **********************************************/
|
||||
HAL_StatusTypeDef HAL_FLASH_Unlock(void);
|
||||
HAL_StatusTypeDef HAL_FLASH_Lock(void);
|
||||
HAL_StatusTypeDef HAL_FLASH_OB_Unlock(void);
|
||||
HAL_StatusTypeDef HAL_FLASH_OB_Lock(void);
|
||||
/* Option bytes control */
|
||||
HAL_StatusTypeDef HAL_FLASH_OB_Launch(void);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup FLASH_Exported_Functions_Group3
|
||||
* @{
|
||||
*/
|
||||
/* Peripheral State functions ************************************************/
|
||||
uint32_t HAL_FLASH_GetError(void);
|
||||
HAL_StatusTypeDef FLASH_WaitForLastOperation(uint32_t Timeout);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
/* Private types -------------------------------------------------------------*/
|
||||
/* Private variables ---------------------------------------------------------*/
|
||||
/** @defgroup FLASH_Private_Variables FLASH Private Variables
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
/* Private constants ---------------------------------------------------------*/
|
||||
/** @defgroup FLASH_Private_Constants FLASH Private Constants
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief ACR register byte 0 (Bits[7:0]) base address
|
||||
*/
|
||||
#define ACR_BYTE0_ADDRESS 0x40023C00U
|
||||
/**
|
||||
* @brief OPTCR register byte 0 (Bits[7:0]) base address
|
||||
*/
|
||||
#define OPTCR_BYTE0_ADDRESS 0x40023C14U
|
||||
/**
|
||||
* @brief OPTCR register byte 1 (Bits[15:8]) base address
|
||||
*/
|
||||
#define OPTCR_BYTE1_ADDRESS 0x40023C15U
|
||||
/**
|
||||
* @brief OPTCR register byte 2 (Bits[23:16]) base address
|
||||
*/
|
||||
#define OPTCR_BYTE2_ADDRESS 0x40023C16U
|
||||
/**
|
||||
* @brief OPTCR register byte 3 (Bits[31:24]) base address
|
||||
*/
|
||||
#define OPTCR_BYTE3_ADDRESS 0x40023C17U
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Private macros ------------------------------------------------------------*/
|
||||
/** @defgroup FLASH_Private_Macros FLASH Private Macros
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup FLASH_IS_FLASH_Definitions FLASH Private macros to check input parameters
|
||||
* @{
|
||||
*/
|
||||
#define IS_FLASH_TYPEPROGRAM(VALUE)(((VALUE) == FLASH_TYPEPROGRAM_BYTE) || \
|
||||
((VALUE) == FLASH_TYPEPROGRAM_HALFWORD) || \
|
||||
((VALUE) == FLASH_TYPEPROGRAM_WORD) || \
|
||||
((VALUE) == FLASH_TYPEPROGRAM_DOUBLEWORD))
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Private functions ---------------------------------------------------------*/
|
||||
/** @defgroup FLASH_Private_Functions FLASH Private Functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* __STM32F4xx_HAL_FLASH_H */
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file stm32f4xx_hal_flash.h
|
||||
* @author MCD Application Team
|
||||
* @brief Header file of FLASH HAL module.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* Copyright (c) 2017 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software is licensed under terms that can be found in the LICENSE file in
|
||||
* the root directory of this software component.
|
||||
* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef __STM32F4xx_HAL_FLASH_H
|
||||
#define __STM32F4xx_HAL_FLASH_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "stm32f4xx_hal_def.h"
|
||||
|
||||
/** @addtogroup STM32F4xx_HAL_Driver
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup FLASH
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* Exported types ------------------------------------------------------------*/
|
||||
/** @defgroup FLASH_Exported_Types FLASH Exported Types
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief FLASH Procedure structure definition
|
||||
*/
|
||||
typedef enum
|
||||
{
|
||||
FLASH_PROC_NONE = 0U,
|
||||
FLASH_PROC_SECTERASE,
|
||||
FLASH_PROC_MASSERASE,
|
||||
FLASH_PROC_PROGRAM
|
||||
} FLASH_ProcedureTypeDef;
|
||||
|
||||
/**
|
||||
* @brief FLASH handle Structure definition
|
||||
*/
|
||||
typedef struct
|
||||
{
|
||||
__IO FLASH_ProcedureTypeDef ProcedureOnGoing; /*Internal variable to indicate which procedure is ongoing or not in IT context*/
|
||||
|
||||
__IO uint32_t NbSectorsToErase; /*Internal variable to save the remaining sectors to erase in IT context*/
|
||||
|
||||
__IO uint8_t VoltageForErase; /*Internal variable to provide voltage range selected by user in IT context*/
|
||||
|
||||
__IO uint32_t Sector; /*Internal variable to define the current sector which is erasing*/
|
||||
|
||||
__IO uint32_t Bank; /*Internal variable to save current bank selected during mass erase*/
|
||||
|
||||
__IO uint32_t Address; /*Internal variable to save address selected for program*/
|
||||
|
||||
HAL_LockTypeDef Lock; /* FLASH locking object */
|
||||
|
||||
__IO uint32_t ErrorCode; /* FLASH error code */
|
||||
|
||||
} FLASH_ProcessTypeDef;
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported constants --------------------------------------------------------*/
|
||||
/** @defgroup FLASH_Exported_Constants FLASH Exported Constants
|
||||
* @{
|
||||
*/
|
||||
/** @defgroup FLASH_Error_Code FLASH Error Code
|
||||
* @brief FLASH Error Code
|
||||
* @{
|
||||
*/
|
||||
#define HAL_FLASH_ERROR_NONE 0x00000000U /*!< No error */
|
||||
#define HAL_FLASH_ERROR_RD 0x00000001U /*!< Read Protection error */
|
||||
#define HAL_FLASH_ERROR_PGS 0x00000002U /*!< Programming Sequence error */
|
||||
#define HAL_FLASH_ERROR_PGP 0x00000004U /*!< Programming Parallelism error */
|
||||
#define HAL_FLASH_ERROR_PGA 0x00000008U /*!< Programming Alignment error */
|
||||
#define HAL_FLASH_ERROR_WRP 0x00000010U /*!< Write protection error */
|
||||
#define HAL_FLASH_ERROR_OPERATION 0x00000020U /*!< Operation Error */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup FLASH_Type_Program FLASH Type Program
|
||||
* @{
|
||||
*/
|
||||
#define FLASH_TYPEPROGRAM_BYTE 0x00000000U /*!< Program byte (8-bit) at a specified address */
|
||||
#define FLASH_TYPEPROGRAM_HALFWORD 0x00000001U /*!< Program a half-word (16-bit) at a specified address */
|
||||
#define FLASH_TYPEPROGRAM_WORD 0x00000002U /*!< Program a word (32-bit) at a specified address */
|
||||
#define FLASH_TYPEPROGRAM_DOUBLEWORD 0x00000003U /*!< Program a double word (64-bit) at a specified address */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup FLASH_Flag_definition FLASH Flag definition
|
||||
* @brief Flag definition
|
||||
* @{
|
||||
*/
|
||||
#define FLASH_FLAG_EOP FLASH_SR_EOP /*!< FLASH End of Operation flag */
|
||||
#define FLASH_FLAG_OPERR FLASH_SR_SOP /*!< FLASH operation Error flag */
|
||||
#define FLASH_FLAG_WRPERR FLASH_SR_WRPERR /*!< FLASH Write protected error flag */
|
||||
#define FLASH_FLAG_PGAERR FLASH_SR_PGAERR /*!< FLASH Programming Alignment error flag */
|
||||
#define FLASH_FLAG_PGPERR FLASH_SR_PGPERR /*!< FLASH Programming Parallelism error flag */
|
||||
#define FLASH_FLAG_PGSERR FLASH_SR_PGSERR /*!< FLASH Programming Sequence error flag */
|
||||
#if defined(FLASH_SR_RDERR)
|
||||
#define FLASH_FLAG_RDERR FLASH_SR_RDERR /*!< Read Protection error flag (PCROP) */
|
||||
#endif /* FLASH_SR_RDERR */
|
||||
#define FLASH_FLAG_BSY FLASH_SR_BSY /*!< FLASH Busy flag */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup FLASH_Interrupt_definition FLASH Interrupt definition
|
||||
* @brief FLASH Interrupt definition
|
||||
* @{
|
||||
*/
|
||||
#define FLASH_IT_EOP FLASH_CR_EOPIE /*!< End of FLASH Operation Interrupt source */
|
||||
#define FLASH_IT_ERR 0x02000000U /*!< Error Interrupt source */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup FLASH_Program_Parallelism FLASH Program Parallelism
|
||||
* @{
|
||||
*/
|
||||
#define FLASH_PSIZE_BYTE 0x00000000U
|
||||
#define FLASH_PSIZE_HALF_WORD 0x00000100U
|
||||
#define FLASH_PSIZE_WORD 0x00000200U
|
||||
#define FLASH_PSIZE_DOUBLE_WORD 0x00000300U
|
||||
#define CR_PSIZE_MASK 0xFFFFFCFFU
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup FLASH_Keys FLASH Keys
|
||||
* @{
|
||||
*/
|
||||
#define RDP_KEY ((uint16_t)0x00A5)
|
||||
#define FLASH_KEY1 0x45670123U
|
||||
#define FLASH_KEY2 0xCDEF89ABU
|
||||
#define FLASH_OPT_KEY1 0x08192A3BU
|
||||
#define FLASH_OPT_KEY2 0x4C5D6E7FU
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported macro ------------------------------------------------------------*/
|
||||
/** @defgroup FLASH_Exported_Macros FLASH Exported Macros
|
||||
* @{
|
||||
*/
|
||||
/**
|
||||
* @brief Set the FLASH Latency.
|
||||
* @param __LATENCY__ FLASH Latency
|
||||
* The value of this parameter depend on device used within the same series
|
||||
* @retval none
|
||||
*/
|
||||
#define __HAL_FLASH_SET_LATENCY(__LATENCY__) (*(__IO uint8_t *)ACR_BYTE0_ADDRESS = (uint8_t)(__LATENCY__))
|
||||
|
||||
/**
|
||||
* @brief Get the FLASH Latency.
|
||||
* @retval FLASH Latency
|
||||
* The value of this parameter depend on device used within the same series
|
||||
*/
|
||||
#define __HAL_FLASH_GET_LATENCY() (READ_BIT((FLASH->ACR), FLASH_ACR_LATENCY))
|
||||
|
||||
/**
|
||||
* @brief Enable the FLASH prefetch buffer.
|
||||
* @retval none
|
||||
*/
|
||||
#define __HAL_FLASH_PREFETCH_BUFFER_ENABLE() (FLASH->ACR |= FLASH_ACR_PRFTEN)
|
||||
|
||||
/**
|
||||
* @brief Disable the FLASH prefetch buffer.
|
||||
* @retval none
|
||||
*/
|
||||
#define __HAL_FLASH_PREFETCH_BUFFER_DISABLE() (FLASH->ACR &= (~FLASH_ACR_PRFTEN))
|
||||
|
||||
/**
|
||||
* @brief Enable the FLASH instruction cache.
|
||||
* @retval none
|
||||
*/
|
||||
#define __HAL_FLASH_INSTRUCTION_CACHE_ENABLE() (FLASH->ACR |= FLASH_ACR_ICEN)
|
||||
|
||||
/**
|
||||
* @brief Disable the FLASH instruction cache.
|
||||
* @retval none
|
||||
*/
|
||||
#define __HAL_FLASH_INSTRUCTION_CACHE_DISABLE() (FLASH->ACR &= (~FLASH_ACR_ICEN))
|
||||
|
||||
/**
|
||||
* @brief Enable the FLASH data cache.
|
||||
* @retval none
|
||||
*/
|
||||
#define __HAL_FLASH_DATA_CACHE_ENABLE() (FLASH->ACR |= FLASH_ACR_DCEN)
|
||||
|
||||
/**
|
||||
* @brief Disable the FLASH data cache.
|
||||
* @retval none
|
||||
*/
|
||||
#define __HAL_FLASH_DATA_CACHE_DISABLE() (FLASH->ACR &= (~FLASH_ACR_DCEN))
|
||||
|
||||
/**
|
||||
* @brief Resets the FLASH instruction Cache.
|
||||
* @note This function must be used only when the Instruction Cache is disabled.
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_FLASH_INSTRUCTION_CACHE_RESET() do {FLASH->ACR |= FLASH_ACR_ICRST; \
|
||||
FLASH->ACR &= ~FLASH_ACR_ICRST; \
|
||||
}while(0U)
|
||||
|
||||
/**
|
||||
* @brief Resets the FLASH data Cache.
|
||||
* @note This function must be used only when the data Cache is disabled.
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_FLASH_DATA_CACHE_RESET() do {FLASH->ACR |= FLASH_ACR_DCRST; \
|
||||
FLASH->ACR &= ~FLASH_ACR_DCRST; \
|
||||
}while(0U)
|
||||
/**
|
||||
* @brief Enable the specified FLASH interrupt.
|
||||
* @param __INTERRUPT__ FLASH interrupt
|
||||
* This parameter can be any combination of the following values:
|
||||
* @arg FLASH_IT_EOP: End of FLASH Operation Interrupt
|
||||
* @arg FLASH_IT_ERR: Error Interrupt
|
||||
* @retval none
|
||||
*/
|
||||
#define __HAL_FLASH_ENABLE_IT(__INTERRUPT__) (FLASH->CR |= (__INTERRUPT__))
|
||||
|
||||
/**
|
||||
* @brief Disable the specified FLASH interrupt.
|
||||
* @param __INTERRUPT__ FLASH interrupt
|
||||
* This parameter can be any combination of the following values:
|
||||
* @arg FLASH_IT_EOP: End of FLASH Operation Interrupt
|
||||
* @arg FLASH_IT_ERR: Error Interrupt
|
||||
* @retval none
|
||||
*/
|
||||
#define __HAL_FLASH_DISABLE_IT(__INTERRUPT__) (FLASH->CR &= ~(uint32_t)(__INTERRUPT__))
|
||||
|
||||
/**
|
||||
* @brief Get the specified FLASH flag status.
|
||||
* @param __FLAG__ specifies the FLASH flags to check.
|
||||
* This parameter can be any combination of the following values:
|
||||
* @arg FLASH_FLAG_EOP : FLASH End of Operation flag
|
||||
* @arg FLASH_FLAG_OPERR : FLASH operation Error flag
|
||||
* @arg FLASH_FLAG_WRPERR: FLASH Write protected error flag
|
||||
* @arg FLASH_FLAG_PGAERR: FLASH Programming Alignment error flag
|
||||
* @arg FLASH_FLAG_PGPERR: FLASH Programming Parallelism error flag
|
||||
* @arg FLASH_FLAG_PGSERR: FLASH Programming Sequence error flag
|
||||
* @arg FLASH_FLAG_RDERR : FLASH Read Protection error flag (PCROP) (*)
|
||||
* @arg FLASH_FLAG_BSY : FLASH Busy flag
|
||||
* (*) FLASH_FLAG_RDERR is not available for STM32F405xx/407xx/415xx/417xx devices
|
||||
* @retval The new state of __FLAG__ (SET or RESET).
|
||||
*/
|
||||
#define __HAL_FLASH_GET_FLAG(__FLAG__) ((FLASH->SR & (__FLAG__)))
|
||||
|
||||
/**
|
||||
* @brief Clear the specified FLASH flags.
|
||||
* @param __FLAG__ specifies the FLASH flags to clear.
|
||||
* This parameter can be any combination of the following values:
|
||||
* @arg FLASH_FLAG_EOP : FLASH End of Operation flag
|
||||
* @arg FLASH_FLAG_OPERR : FLASH operation Error flag
|
||||
* @arg FLASH_FLAG_WRPERR: FLASH Write protected error flag
|
||||
* @arg FLASH_FLAG_PGAERR: FLASH Programming Alignment error flag
|
||||
* @arg FLASH_FLAG_PGPERR: FLASH Programming Parallelism error flag
|
||||
* @arg FLASH_FLAG_PGSERR: FLASH Programming Sequence error flag
|
||||
* @arg FLASH_FLAG_RDERR : FLASH Read Protection error flag (PCROP) (*)
|
||||
* (*) FLASH_FLAG_RDERR is not available for STM32F405xx/407xx/415xx/417xx devices
|
||||
* @retval none
|
||||
*/
|
||||
#define __HAL_FLASH_CLEAR_FLAG(__FLAG__) (FLASH->SR = (__FLAG__))
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Include FLASH HAL Extension module */
|
||||
#include "stm32f4xx_hal_flash_ex.h"
|
||||
#include "stm32f4xx_hal_flash_ramfunc.h"
|
||||
|
||||
/* Exported functions --------------------------------------------------------*/
|
||||
/** @addtogroup FLASH_Exported_Functions
|
||||
* @{
|
||||
*/
|
||||
/** @addtogroup FLASH_Exported_Functions_Group1
|
||||
* @{
|
||||
*/
|
||||
/* Program operation functions ***********************************************/
|
||||
HAL_StatusTypeDef HAL_FLASH_Program(uint32_t TypeProgram, uint32_t Address, uint64_t Data);
|
||||
HAL_StatusTypeDef HAL_FLASH_Program_IT(uint32_t TypeProgram, uint32_t Address, uint64_t Data);
|
||||
/* FLASH IRQ handler method */
|
||||
void HAL_FLASH_IRQHandler(void);
|
||||
/* Callbacks in non blocking modes */
|
||||
void HAL_FLASH_EndOfOperationCallback(uint32_t ReturnValue);
|
||||
void HAL_FLASH_OperationErrorCallback(uint32_t ReturnValue);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup FLASH_Exported_Functions_Group2
|
||||
* @{
|
||||
*/
|
||||
/* Peripheral Control functions **********************************************/
|
||||
HAL_StatusTypeDef HAL_FLASH_Unlock(void);
|
||||
HAL_StatusTypeDef HAL_FLASH_Lock(void);
|
||||
HAL_StatusTypeDef HAL_FLASH_OB_Unlock(void);
|
||||
HAL_StatusTypeDef HAL_FLASH_OB_Lock(void);
|
||||
/* Option bytes control */
|
||||
HAL_StatusTypeDef HAL_FLASH_OB_Launch(void);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup FLASH_Exported_Functions_Group3
|
||||
* @{
|
||||
*/
|
||||
/* Peripheral State functions ************************************************/
|
||||
uint32_t HAL_FLASH_GetError(void);
|
||||
HAL_StatusTypeDef FLASH_WaitForLastOperation(uint32_t Timeout);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
/* Private types -------------------------------------------------------------*/
|
||||
/* Private variables ---------------------------------------------------------*/
|
||||
/** @defgroup FLASH_Private_Variables FLASH Private Variables
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
/* Private constants ---------------------------------------------------------*/
|
||||
/** @defgroup FLASH_Private_Constants FLASH Private Constants
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief ACR register byte 0 (Bits[7:0]) base address
|
||||
*/
|
||||
#define ACR_BYTE0_ADDRESS 0x40023C00U
|
||||
/**
|
||||
* @brief OPTCR register byte 0 (Bits[7:0]) base address
|
||||
*/
|
||||
#define OPTCR_BYTE0_ADDRESS 0x40023C14U
|
||||
/**
|
||||
* @brief OPTCR register byte 1 (Bits[15:8]) base address
|
||||
*/
|
||||
#define OPTCR_BYTE1_ADDRESS 0x40023C15U
|
||||
/**
|
||||
* @brief OPTCR register byte 2 (Bits[23:16]) base address
|
||||
*/
|
||||
#define OPTCR_BYTE2_ADDRESS 0x40023C16U
|
||||
/**
|
||||
* @brief OPTCR register byte 3 (Bits[31:24]) base address
|
||||
*/
|
||||
#define OPTCR_BYTE3_ADDRESS 0x40023C17U
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Private macros ------------------------------------------------------------*/
|
||||
/** @defgroup FLASH_Private_Macros FLASH Private Macros
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup FLASH_IS_FLASH_Definitions FLASH Private macros to check input parameters
|
||||
* @{
|
||||
*/
|
||||
#define IS_FLASH_TYPEPROGRAM(VALUE)(((VALUE) == FLASH_TYPEPROGRAM_BYTE) || \
|
||||
((VALUE) == FLASH_TYPEPROGRAM_HALFWORD) || \
|
||||
((VALUE) == FLASH_TYPEPROGRAM_WORD) || \
|
||||
((VALUE) == FLASH_TYPEPROGRAM_DOUBLEWORD))
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Private functions ---------------------------------------------------------*/
|
||||
/** @defgroup FLASH_Private_Functions FLASH Private Functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* __STM32F4xx_HAL_FLASH_H */
|
||||
|
||||
|
|
|
|||
File diff suppressed because it is too large
Load diff
|
|
@ -1,79 +1,76 @@
|
|||
/**
|
||||
******************************************************************************
|
||||
* @file stm32f4xx_hal_flash_ramfunc.h
|
||||
* @author MCD Application Team
|
||||
* @brief Header file of FLASH RAMFUNC driver.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* <h2><center>© Copyright (c) 2017 STMicroelectronics.
|
||||
* All rights reserved.</center></h2>
|
||||
*
|
||||
* This software component is licensed by ST under BSD 3-Clause license,
|
||||
* the "License"; You may not use this file except in compliance with the
|
||||
* License. You may obtain a copy of the License at:
|
||||
* opensource.org/licenses/BSD-3-Clause
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef __STM32F4xx_FLASH_RAMFUNC_H
|
||||
#define __STM32F4xx_FLASH_RAMFUNC_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) || defined(STM32F411xE) || defined(STM32F446xx) || defined(STM32F412Zx) ||\
|
||||
defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx)
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "stm32f4xx_hal_def.h"
|
||||
|
||||
/** @addtogroup STM32F4xx_HAL_Driver
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup FLASH_RAMFUNC
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* Exported types ------------------------------------------------------------*/
|
||||
/* Exported macro ------------------------------------------------------------*/
|
||||
/* Exported functions --------------------------------------------------------*/
|
||||
/** @addtogroup FLASH_RAMFUNC_Exported_Functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup FLASH_RAMFUNC_Exported_Functions_Group1
|
||||
* @{
|
||||
*/
|
||||
__RAM_FUNC HAL_StatusTypeDef HAL_FLASHEx_StopFlashInterfaceClk(void);
|
||||
__RAM_FUNC HAL_StatusTypeDef HAL_FLASHEx_StartFlashInterfaceClk(void);
|
||||
__RAM_FUNC HAL_StatusTypeDef HAL_FLASHEx_EnableFlashSleepMode(void);
|
||||
__RAM_FUNC HAL_StatusTypeDef HAL_FLASHEx_DisableFlashSleepMode(void);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#endif /* STM32F410xx || STM32F411xE || STM32F446xx || STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx */
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
|
||||
#endif /* __STM32F4xx_FLASH_RAMFUNC_H */
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file stm32f4xx_hal_flash_ramfunc.h
|
||||
* @author MCD Application Team
|
||||
* @brief Header file of FLASH RAMFUNC driver.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* Copyright (c) 2017 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software is licensed under terms that can be found in the LICENSE file in
|
||||
* the root directory of this software component.
|
||||
* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef __STM32F4xx_FLASH_RAMFUNC_H
|
||||
#define __STM32F4xx_FLASH_RAMFUNC_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) || defined(STM32F411xE) || defined(STM32F446xx) || defined(STM32F412Zx) ||\
|
||||
defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx)
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "stm32f4xx_hal_def.h"
|
||||
|
||||
/** @addtogroup STM32F4xx_HAL_Driver
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup FLASH_RAMFUNC
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* Exported types ------------------------------------------------------------*/
|
||||
/* Exported macro ------------------------------------------------------------*/
|
||||
/* Exported functions --------------------------------------------------------*/
|
||||
/** @addtogroup FLASH_RAMFUNC_Exported_Functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup FLASH_RAMFUNC_Exported_Functions_Group1
|
||||
* @{
|
||||
*/
|
||||
__RAM_FUNC HAL_StatusTypeDef HAL_FLASHEx_StopFlashInterfaceClk(void);
|
||||
__RAM_FUNC HAL_StatusTypeDef HAL_FLASHEx_StartFlashInterfaceClk(void);
|
||||
__RAM_FUNC HAL_StatusTypeDef HAL_FLASHEx_EnableFlashSleepMode(void);
|
||||
__RAM_FUNC HAL_StatusTypeDef HAL_FLASHEx_DisableFlashSleepMode(void);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#endif /* STM32F410xx || STM32F411xE || STM32F446xx || STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx */
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
|
||||
#endif /* __STM32F4xx_FLASH_RAMFUNC_H */
|
||||
|
||||
|
|
|
|||
|
|
@ -1,309 +1,325 @@
|
|||
/**
|
||||
******************************************************************************
|
||||
* @file stm32f4xx_hal_gpio.h
|
||||
* @author MCD Application Team
|
||||
* @brief Header file of GPIO HAL module.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* <h2><center>© Copyright (c) 2017 STMicroelectronics.
|
||||
* All rights reserved.</center></h2>
|
||||
*
|
||||
* This software component is licensed by ST under BSD 3-Clause license,
|
||||
* the "License"; You may not use this file except in compliance with the
|
||||
* License. You may obtain a copy of the License at:
|
||||
* opensource.org/licenses/BSD-3-Clause
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef __STM32F4xx_HAL_GPIO_H
|
||||
#define __STM32F4xx_HAL_GPIO_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "stm32f4xx_hal_def.h"
|
||||
|
||||
/** @addtogroup STM32F4xx_HAL_Driver
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup GPIO
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* Exported types ------------------------------------------------------------*/
|
||||
/** @defgroup GPIO_Exported_Types GPIO Exported Types
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief GPIO Init structure definition
|
||||
*/
|
||||
typedef struct
|
||||
{
|
||||
uint32_t Pin; /*!< Specifies the GPIO pins to be configured.
|
||||
This parameter can be any value of @ref GPIO_pins_define */
|
||||
|
||||
uint32_t Mode; /*!< Specifies the operating mode for the selected pins.
|
||||
This parameter can be a value of @ref GPIO_mode_define */
|
||||
|
||||
uint32_t Pull; /*!< Specifies the Pull-up or Pull-Down activation for the selected pins.
|
||||
This parameter can be a value of @ref GPIO_pull_define */
|
||||
|
||||
uint32_t Speed; /*!< Specifies the speed for the selected pins.
|
||||
This parameter can be a value of @ref GPIO_speed_define */
|
||||
|
||||
uint32_t Alternate; /*!< Peripheral to be connected to the selected pins.
|
||||
This parameter can be a value of @ref GPIO_Alternate_function_selection */
|
||||
}GPIO_InitTypeDef;
|
||||
|
||||
/**
|
||||
* @brief GPIO Bit SET and Bit RESET enumeration
|
||||
*/
|
||||
typedef enum
|
||||
{
|
||||
GPIO_PIN_RESET = 0,
|
||||
GPIO_PIN_SET
|
||||
}GPIO_PinState;
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported constants --------------------------------------------------------*/
|
||||
|
||||
/** @defgroup GPIO_Exported_Constants GPIO Exported Constants
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup GPIO_pins_define GPIO pins define
|
||||
* @{
|
||||
*/
|
||||
#define GPIO_PIN_0 ((uint16_t)0x0001) /* Pin 0 selected */
|
||||
#define GPIO_PIN_1 ((uint16_t)0x0002) /* Pin 1 selected */
|
||||
#define GPIO_PIN_2 ((uint16_t)0x0004) /* Pin 2 selected */
|
||||
#define GPIO_PIN_3 ((uint16_t)0x0008) /* Pin 3 selected */
|
||||
#define GPIO_PIN_4 ((uint16_t)0x0010) /* Pin 4 selected */
|
||||
#define GPIO_PIN_5 ((uint16_t)0x0020) /* Pin 5 selected */
|
||||
#define GPIO_PIN_6 ((uint16_t)0x0040) /* Pin 6 selected */
|
||||
#define GPIO_PIN_7 ((uint16_t)0x0080) /* Pin 7 selected */
|
||||
#define GPIO_PIN_8 ((uint16_t)0x0100) /* Pin 8 selected */
|
||||
#define GPIO_PIN_9 ((uint16_t)0x0200) /* Pin 9 selected */
|
||||
#define GPIO_PIN_10 ((uint16_t)0x0400) /* Pin 10 selected */
|
||||
#define GPIO_PIN_11 ((uint16_t)0x0800) /* Pin 11 selected */
|
||||
#define GPIO_PIN_12 ((uint16_t)0x1000) /* Pin 12 selected */
|
||||
#define GPIO_PIN_13 ((uint16_t)0x2000) /* Pin 13 selected */
|
||||
#define GPIO_PIN_14 ((uint16_t)0x4000) /* Pin 14 selected */
|
||||
#define GPIO_PIN_15 ((uint16_t)0x8000) /* Pin 15 selected */
|
||||
#define GPIO_PIN_All ((uint16_t)0xFFFF) /* All pins selected */
|
||||
|
||||
#define GPIO_PIN_MASK 0x0000FFFFU /* PIN mask for assert test */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup GPIO_mode_define GPIO mode define
|
||||
* @brief GPIO Configuration Mode
|
||||
* Elements values convention: 0xX0yz00YZ
|
||||
* - X : GPIO mode or EXTI Mode
|
||||
* - y : External IT or Event trigger detection
|
||||
* - z : IO configuration on External IT or Event
|
||||
* - Y : Output type (Push Pull or Open Drain)
|
||||
* - Z : IO Direction mode (Input, Output, Alternate or Analog)
|
||||
* @{
|
||||
*/
|
||||
#define GPIO_MODE_INPUT 0x00000000U /*!< Input Floating Mode */
|
||||
#define GPIO_MODE_OUTPUT_PP 0x00000001U /*!< Output Push Pull Mode */
|
||||
#define GPIO_MODE_OUTPUT_OD 0x00000011U /*!< Output Open Drain Mode */
|
||||
#define GPIO_MODE_AF_PP 0x00000002U /*!< Alternate Function Push Pull Mode */
|
||||
#define GPIO_MODE_AF_OD 0x00000012U /*!< Alternate Function Open Drain Mode */
|
||||
|
||||
#define GPIO_MODE_ANALOG 0x00000003U /*!< Analog Mode */
|
||||
|
||||
#define GPIO_MODE_IT_RISING 0x10110000U /*!< External Interrupt Mode with Rising edge trigger detection */
|
||||
#define GPIO_MODE_IT_FALLING 0x10210000U /*!< External Interrupt Mode with Falling edge trigger detection */
|
||||
#define GPIO_MODE_IT_RISING_FALLING 0x10310000U /*!< External Interrupt Mode with Rising/Falling edge trigger detection */
|
||||
|
||||
#define GPIO_MODE_EVT_RISING 0x10120000U /*!< External Event Mode with Rising edge trigger detection */
|
||||
#define GPIO_MODE_EVT_FALLING 0x10220000U /*!< External Event Mode with Falling edge trigger detection */
|
||||
#define GPIO_MODE_EVT_RISING_FALLING 0x10320000U /*!< External Event Mode with Rising/Falling edge trigger detection */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup GPIO_speed_define GPIO speed define
|
||||
* @brief GPIO Output Maximum frequency
|
||||
* @{
|
||||
*/
|
||||
#define GPIO_SPEED_FREQ_LOW 0x00000000U /*!< IO works at 2 MHz, please refer to the product datasheet */
|
||||
#define GPIO_SPEED_FREQ_MEDIUM 0x00000001U /*!< range 12,5 MHz to 50 MHz, please refer to the product datasheet */
|
||||
#define GPIO_SPEED_FREQ_HIGH 0x00000002U /*!< range 25 MHz to 100 MHz, please refer to the product datasheet */
|
||||
#define GPIO_SPEED_FREQ_VERY_HIGH 0x00000003U /*!< range 50 MHz to 200 MHz, please refer to the product datasheet */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup GPIO_pull_define GPIO pull define
|
||||
* @brief GPIO Pull-Up or Pull-Down Activation
|
||||
* @{
|
||||
*/
|
||||
#define GPIO_NOPULL 0x00000000U /*!< No Pull-up or Pull-down activation */
|
||||
#define GPIO_PULLUP 0x00000001U /*!< Pull-up activation */
|
||||
#define GPIO_PULLDOWN 0x00000002U /*!< Pull-down activation */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported macro ------------------------------------------------------------*/
|
||||
/** @defgroup GPIO_Exported_Macros GPIO Exported Macros
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief Checks whether the specified EXTI line flag is set or not.
|
||||
* @param __EXTI_LINE__ specifies the EXTI line flag to check.
|
||||
* This parameter can be GPIO_PIN_x where x can be(0..15)
|
||||
* @retval The new state of __EXTI_LINE__ (SET or RESET).
|
||||
*/
|
||||
#define __HAL_GPIO_EXTI_GET_FLAG(__EXTI_LINE__) (EXTI->PR & (__EXTI_LINE__))
|
||||
|
||||
/**
|
||||
* @brief Clears the EXTI's line pending flags.
|
||||
* @param __EXTI_LINE__ specifies the EXTI lines flags to clear.
|
||||
* This parameter can be any combination of GPIO_PIN_x where x can be (0..15)
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_GPIO_EXTI_CLEAR_FLAG(__EXTI_LINE__) (EXTI->PR = (__EXTI_LINE__))
|
||||
|
||||
/**
|
||||
* @brief Checks whether the specified EXTI line is asserted or not.
|
||||
* @param __EXTI_LINE__ specifies the EXTI line to check.
|
||||
* This parameter can be GPIO_PIN_x where x can be(0..15)
|
||||
* @retval The new state of __EXTI_LINE__ (SET or RESET).
|
||||
*/
|
||||
#define __HAL_GPIO_EXTI_GET_IT(__EXTI_LINE__) (EXTI->PR & (__EXTI_LINE__))
|
||||
|
||||
/**
|
||||
* @brief Clears the EXTI's line pending bits.
|
||||
* @param __EXTI_LINE__ specifies the EXTI lines to clear.
|
||||
* This parameter can be any combination of GPIO_PIN_x where x can be (0..15)
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_GPIO_EXTI_CLEAR_IT(__EXTI_LINE__) (EXTI->PR = (__EXTI_LINE__))
|
||||
|
||||
/**
|
||||
* @brief Generates a Software interrupt on selected EXTI line.
|
||||
* @param __EXTI_LINE__ specifies the EXTI line to check.
|
||||
* This parameter can be GPIO_PIN_x where x can be(0..15)
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_GPIO_EXTI_GENERATE_SWIT(__EXTI_LINE__) (EXTI->SWIER |= (__EXTI_LINE__))
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Include GPIO HAL Extension module */
|
||||
#include "stm32f4xx_hal_gpio_ex.h"
|
||||
|
||||
/* Exported functions --------------------------------------------------------*/
|
||||
/** @addtogroup GPIO_Exported_Functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup GPIO_Exported_Functions_Group1
|
||||
* @{
|
||||
*/
|
||||
/* Initialization and de-initialization functions *****************************/
|
||||
void HAL_GPIO_Init(GPIO_TypeDef *GPIOx, GPIO_InitTypeDef *GPIO_Init);
|
||||
void HAL_GPIO_DeInit(GPIO_TypeDef *GPIOx, uint32_t GPIO_Pin);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup GPIO_Exported_Functions_Group2
|
||||
* @{
|
||||
*/
|
||||
/* IO operation functions *****************************************************/
|
||||
GPIO_PinState HAL_GPIO_ReadPin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin);
|
||||
void HAL_GPIO_WritePin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin, GPIO_PinState PinState);
|
||||
void HAL_GPIO_TogglePin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin);
|
||||
HAL_StatusTypeDef HAL_GPIO_LockPin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin);
|
||||
void HAL_GPIO_EXTI_IRQHandler(uint16_t GPIO_Pin);
|
||||
void HAL_GPIO_EXTI_Callback(uint16_t GPIO_Pin);
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
/* Private types -------------------------------------------------------------*/
|
||||
/* Private variables ---------------------------------------------------------*/
|
||||
/* Private constants ---------------------------------------------------------*/
|
||||
/** @defgroup GPIO_Private_Constants GPIO Private Constants
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Private macros ------------------------------------------------------------*/
|
||||
/** @defgroup GPIO_Private_Macros GPIO Private Macros
|
||||
* @{
|
||||
*/
|
||||
#define IS_GPIO_PIN_ACTION(ACTION) (((ACTION) == GPIO_PIN_RESET) || ((ACTION) == GPIO_PIN_SET))
|
||||
#define IS_GPIO_PIN(PIN) ((((PIN) & GPIO_PIN_MASK ) != 0x00U) && (((PIN) & ~GPIO_PIN_MASK) == 0x00U))
|
||||
#define IS_GPIO_MODE(MODE) (((MODE) == GPIO_MODE_INPUT) ||\
|
||||
((MODE) == GPIO_MODE_OUTPUT_PP) ||\
|
||||
((MODE) == GPIO_MODE_OUTPUT_OD) ||\
|
||||
((MODE) == GPIO_MODE_AF_PP) ||\
|
||||
((MODE) == GPIO_MODE_AF_OD) ||\
|
||||
((MODE) == GPIO_MODE_IT_RISING) ||\
|
||||
((MODE) == GPIO_MODE_IT_FALLING) ||\
|
||||
((MODE) == GPIO_MODE_IT_RISING_FALLING) ||\
|
||||
((MODE) == GPIO_MODE_EVT_RISING) ||\
|
||||
((MODE) == GPIO_MODE_EVT_FALLING) ||\
|
||||
((MODE) == GPIO_MODE_EVT_RISING_FALLING) ||\
|
||||
((MODE) == GPIO_MODE_ANALOG))
|
||||
#define IS_GPIO_SPEED(SPEED) (((SPEED) == GPIO_SPEED_FREQ_LOW) || ((SPEED) == GPIO_SPEED_FREQ_MEDIUM) || \
|
||||
((SPEED) == GPIO_SPEED_FREQ_HIGH) || ((SPEED) == GPIO_SPEED_FREQ_VERY_HIGH))
|
||||
#define IS_GPIO_PULL(PULL) (((PULL) == GPIO_NOPULL) || ((PULL) == GPIO_PULLUP) || \
|
||||
((PULL) == GPIO_PULLDOWN))
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Private functions ---------------------------------------------------------*/
|
||||
/** @defgroup GPIO_Private_Functions GPIO Private Functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* __STM32F4xx_HAL_GPIO_H */
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file stm32f4xx_hal_gpio.h
|
||||
* @author MCD Application Team
|
||||
* @brief Header file of GPIO HAL module.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* Copyright (c) 2017 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software is licensed under terms that can be found in the LICENSE file
|
||||
* in the root directory of this software component.
|
||||
* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef __STM32F4xx_HAL_GPIO_H
|
||||
#define __STM32F4xx_HAL_GPIO_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "stm32f4xx_hal_def.h"
|
||||
|
||||
/** @addtogroup STM32F4xx_HAL_Driver
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup GPIO
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* Exported types ------------------------------------------------------------*/
|
||||
/** @defgroup GPIO_Exported_Types GPIO Exported Types
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief GPIO Init structure definition
|
||||
*/
|
||||
typedef struct
|
||||
{
|
||||
uint32_t Pin; /*!< Specifies the GPIO pins to be configured.
|
||||
This parameter can be any value of @ref GPIO_pins_define */
|
||||
|
||||
uint32_t Mode; /*!< Specifies the operating mode for the selected pins.
|
||||
This parameter can be a value of @ref GPIO_mode_define */
|
||||
|
||||
uint32_t Pull; /*!< Specifies the Pull-up or Pull-Down activation for the selected pins.
|
||||
This parameter can be a value of @ref GPIO_pull_define */
|
||||
|
||||
uint32_t Speed; /*!< Specifies the speed for the selected pins.
|
||||
This parameter can be a value of @ref GPIO_speed_define */
|
||||
|
||||
uint32_t Alternate; /*!< Peripheral to be connected to the selected pins.
|
||||
This parameter can be a value of @ref GPIO_Alternate_function_selection */
|
||||
}GPIO_InitTypeDef;
|
||||
|
||||
/**
|
||||
* @brief GPIO Bit SET and Bit RESET enumeration
|
||||
*/
|
||||
typedef enum
|
||||
{
|
||||
GPIO_PIN_RESET = 0,
|
||||
GPIO_PIN_SET
|
||||
}GPIO_PinState;
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported constants --------------------------------------------------------*/
|
||||
|
||||
/** @defgroup GPIO_Exported_Constants GPIO Exported Constants
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup GPIO_pins_define GPIO pins define
|
||||
* @{
|
||||
*/
|
||||
#define GPIO_PIN_0 ((uint16_t)0x0001) /* Pin 0 selected */
|
||||
#define GPIO_PIN_1 ((uint16_t)0x0002) /* Pin 1 selected */
|
||||
#define GPIO_PIN_2 ((uint16_t)0x0004) /* Pin 2 selected */
|
||||
#define GPIO_PIN_3 ((uint16_t)0x0008) /* Pin 3 selected */
|
||||
#define GPIO_PIN_4 ((uint16_t)0x0010) /* Pin 4 selected */
|
||||
#define GPIO_PIN_5 ((uint16_t)0x0020) /* Pin 5 selected */
|
||||
#define GPIO_PIN_6 ((uint16_t)0x0040) /* Pin 6 selected */
|
||||
#define GPIO_PIN_7 ((uint16_t)0x0080) /* Pin 7 selected */
|
||||
#define GPIO_PIN_8 ((uint16_t)0x0100) /* Pin 8 selected */
|
||||
#define GPIO_PIN_9 ((uint16_t)0x0200) /* Pin 9 selected */
|
||||
#define GPIO_PIN_10 ((uint16_t)0x0400) /* Pin 10 selected */
|
||||
#define GPIO_PIN_11 ((uint16_t)0x0800) /* Pin 11 selected */
|
||||
#define GPIO_PIN_12 ((uint16_t)0x1000) /* Pin 12 selected */
|
||||
#define GPIO_PIN_13 ((uint16_t)0x2000) /* Pin 13 selected */
|
||||
#define GPIO_PIN_14 ((uint16_t)0x4000) /* Pin 14 selected */
|
||||
#define GPIO_PIN_15 ((uint16_t)0x8000) /* Pin 15 selected */
|
||||
#define GPIO_PIN_All ((uint16_t)0xFFFF) /* All pins selected */
|
||||
|
||||
#define GPIO_PIN_MASK 0x0000FFFFU /* PIN mask for assert test */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup GPIO_mode_define GPIO mode define
|
||||
* @brief GPIO Configuration Mode
|
||||
* Elements values convention: 0x00WX00YZ
|
||||
* - W : EXTI trigger detection on 3 bits
|
||||
* - X : EXTI mode (IT or Event) on 2 bits
|
||||
* - Y : Output type (Push Pull or Open Drain) on 1 bit
|
||||
* - Z : GPIO mode (Input, Output, Alternate or Analog) on 2 bits
|
||||
* @{
|
||||
*/
|
||||
#define GPIO_MODE_INPUT MODE_INPUT /*!< Input Floating Mode */
|
||||
#define GPIO_MODE_OUTPUT_PP (MODE_OUTPUT | OUTPUT_PP) /*!< Output Push Pull Mode */
|
||||
#define GPIO_MODE_OUTPUT_OD (MODE_OUTPUT | OUTPUT_OD) /*!< Output Open Drain Mode */
|
||||
#define GPIO_MODE_AF_PP (MODE_AF | OUTPUT_PP) /*!< Alternate Function Push Pull Mode */
|
||||
#define GPIO_MODE_AF_OD (MODE_AF | OUTPUT_OD) /*!< Alternate Function Open Drain Mode */
|
||||
|
||||
#define GPIO_MODE_ANALOG MODE_ANALOG /*!< Analog Mode */
|
||||
|
||||
#define GPIO_MODE_IT_RISING (MODE_INPUT | EXTI_IT | TRIGGER_RISING) /*!< External Interrupt Mode with Rising edge trigger detection */
|
||||
#define GPIO_MODE_IT_FALLING (MODE_INPUT | EXTI_IT | TRIGGER_FALLING) /*!< External Interrupt Mode with Falling edge trigger detection */
|
||||
#define GPIO_MODE_IT_RISING_FALLING (MODE_INPUT | EXTI_IT | TRIGGER_RISING | TRIGGER_FALLING) /*!< External Interrupt Mode with Rising/Falling edge trigger detection */
|
||||
|
||||
#define GPIO_MODE_EVT_RISING (MODE_INPUT | EXTI_EVT | TRIGGER_RISING) /*!< External Event Mode with Rising edge trigger detection */
|
||||
#define GPIO_MODE_EVT_FALLING (MODE_INPUT | EXTI_EVT | TRIGGER_FALLING) /*!< External Event Mode with Falling edge trigger detection */
|
||||
#define GPIO_MODE_EVT_RISING_FALLING (MODE_INPUT | EXTI_EVT | TRIGGER_RISING | TRIGGER_FALLING) /*!< External Event Mode with Rising/Falling edge trigger detection */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup GPIO_speed_define GPIO speed define
|
||||
* @brief GPIO Output Maximum frequency
|
||||
* @{
|
||||
*/
|
||||
#define GPIO_SPEED_FREQ_LOW 0x00000000U /*!< IO works at 2 MHz, please refer to the product datasheet */
|
||||
#define GPIO_SPEED_FREQ_MEDIUM 0x00000001U /*!< range 12,5 MHz to 50 MHz, please refer to the product datasheet */
|
||||
#define GPIO_SPEED_FREQ_HIGH 0x00000002U /*!< range 25 MHz to 100 MHz, please refer to the product datasheet */
|
||||
#define GPIO_SPEED_FREQ_VERY_HIGH 0x00000003U /*!< range 50 MHz to 200 MHz, please refer to the product datasheet */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup GPIO_pull_define GPIO pull define
|
||||
* @brief GPIO Pull-Up or Pull-Down Activation
|
||||
* @{
|
||||
*/
|
||||
#define GPIO_NOPULL 0x00000000U /*!< No Pull-up or Pull-down activation */
|
||||
#define GPIO_PULLUP 0x00000001U /*!< Pull-up activation */
|
||||
#define GPIO_PULLDOWN 0x00000002U /*!< Pull-down activation */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported macro ------------------------------------------------------------*/
|
||||
/** @defgroup GPIO_Exported_Macros GPIO Exported Macros
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief Checks whether the specified EXTI line flag is set or not.
|
||||
* @param __EXTI_LINE__ specifies the EXTI line flag to check.
|
||||
* This parameter can be GPIO_PIN_x where x can be(0..15)
|
||||
* @retval The new state of __EXTI_LINE__ (SET or RESET).
|
||||
*/
|
||||
#define __HAL_GPIO_EXTI_GET_FLAG(__EXTI_LINE__) (EXTI->PR & (__EXTI_LINE__))
|
||||
|
||||
/**
|
||||
* @brief Clears the EXTI's line pending flags.
|
||||
* @param __EXTI_LINE__ specifies the EXTI lines flags to clear.
|
||||
* This parameter can be any combination of GPIO_PIN_x where x can be (0..15)
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_GPIO_EXTI_CLEAR_FLAG(__EXTI_LINE__) (EXTI->PR = (__EXTI_LINE__))
|
||||
|
||||
/**
|
||||
* @brief Checks whether the specified EXTI line is asserted or not.
|
||||
* @param __EXTI_LINE__ specifies the EXTI line to check.
|
||||
* This parameter can be GPIO_PIN_x where x can be(0..15)
|
||||
* @retval The new state of __EXTI_LINE__ (SET or RESET).
|
||||
*/
|
||||
#define __HAL_GPIO_EXTI_GET_IT(__EXTI_LINE__) (EXTI->PR & (__EXTI_LINE__))
|
||||
|
||||
/**
|
||||
* @brief Clears the EXTI's line pending bits.
|
||||
* @param __EXTI_LINE__ specifies the EXTI lines to clear.
|
||||
* This parameter can be any combination of GPIO_PIN_x where x can be (0..15)
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_GPIO_EXTI_CLEAR_IT(__EXTI_LINE__) (EXTI->PR = (__EXTI_LINE__))
|
||||
|
||||
/**
|
||||
* @brief Generates a Software interrupt on selected EXTI line.
|
||||
* @param __EXTI_LINE__ specifies the EXTI line to check.
|
||||
* This parameter can be GPIO_PIN_x where x can be(0..15)
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_GPIO_EXTI_GENERATE_SWIT(__EXTI_LINE__) (EXTI->SWIER |= (__EXTI_LINE__))
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Include GPIO HAL Extension module */
|
||||
#include "stm32f4xx_hal_gpio_ex.h"
|
||||
|
||||
/* Exported functions --------------------------------------------------------*/
|
||||
/** @addtogroup GPIO_Exported_Functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup GPIO_Exported_Functions_Group1
|
||||
* @{
|
||||
*/
|
||||
/* Initialization and de-initialization functions *****************************/
|
||||
void HAL_GPIO_Init(GPIO_TypeDef *GPIOx, GPIO_InitTypeDef *GPIO_Init);
|
||||
void HAL_GPIO_DeInit(GPIO_TypeDef *GPIOx, uint32_t GPIO_Pin);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup GPIO_Exported_Functions_Group2
|
||||
* @{
|
||||
*/
|
||||
/* IO operation functions *****************************************************/
|
||||
GPIO_PinState HAL_GPIO_ReadPin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin);
|
||||
void HAL_GPIO_WritePin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin, GPIO_PinState PinState);
|
||||
void HAL_GPIO_TogglePin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin);
|
||||
HAL_StatusTypeDef HAL_GPIO_LockPin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin);
|
||||
void HAL_GPIO_EXTI_IRQHandler(uint16_t GPIO_Pin);
|
||||
void HAL_GPIO_EXTI_Callback(uint16_t GPIO_Pin);
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
/* Private types -------------------------------------------------------------*/
|
||||
/* Private variables ---------------------------------------------------------*/
|
||||
/* Private constants ---------------------------------------------------------*/
|
||||
/** @defgroup GPIO_Private_Constants GPIO Private Constants
|
||||
* @{
|
||||
*/
|
||||
#define GPIO_MODE_Pos 0U
|
||||
#define GPIO_MODE (0x3UL << GPIO_MODE_Pos)
|
||||
#define MODE_INPUT (0x0UL << GPIO_MODE_Pos)
|
||||
#define MODE_OUTPUT (0x1UL << GPIO_MODE_Pos)
|
||||
#define MODE_AF (0x2UL << GPIO_MODE_Pos)
|
||||
#define MODE_ANALOG (0x3UL << GPIO_MODE_Pos)
|
||||
#define OUTPUT_TYPE_Pos 4U
|
||||
#define OUTPUT_TYPE (0x1UL << OUTPUT_TYPE_Pos)
|
||||
#define OUTPUT_PP (0x0UL << OUTPUT_TYPE_Pos)
|
||||
#define OUTPUT_OD (0x1UL << OUTPUT_TYPE_Pos)
|
||||
#define EXTI_MODE_Pos 16U
|
||||
#define EXTI_MODE (0x3UL << EXTI_MODE_Pos)
|
||||
#define EXTI_IT (0x1UL << EXTI_MODE_Pos)
|
||||
#define EXTI_EVT (0x2UL << EXTI_MODE_Pos)
|
||||
#define TRIGGER_MODE_Pos 20U
|
||||
#define TRIGGER_MODE (0x7UL << TRIGGER_MODE_Pos)
|
||||
#define TRIGGER_RISING (0x1UL << TRIGGER_MODE_Pos)
|
||||
#define TRIGGER_FALLING (0x2UL << TRIGGER_MODE_Pos)
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Private macros ------------------------------------------------------------*/
|
||||
/** @defgroup GPIO_Private_Macros GPIO Private Macros
|
||||
* @{
|
||||
*/
|
||||
#define IS_GPIO_PIN_ACTION(ACTION) (((ACTION) == GPIO_PIN_RESET) || ((ACTION) == GPIO_PIN_SET))
|
||||
#define IS_GPIO_PIN(PIN) (((((uint32_t)PIN) & GPIO_PIN_MASK ) != 0x00U) && ((((uint32_t)PIN) & ~GPIO_PIN_MASK) == 0x00U))
|
||||
#define IS_GPIO_MODE(MODE) (((MODE) == GPIO_MODE_INPUT) ||\
|
||||
((MODE) == GPIO_MODE_OUTPUT_PP) ||\
|
||||
((MODE) == GPIO_MODE_OUTPUT_OD) ||\
|
||||
((MODE) == GPIO_MODE_AF_PP) ||\
|
||||
((MODE) == GPIO_MODE_AF_OD) ||\
|
||||
((MODE) == GPIO_MODE_IT_RISING) ||\
|
||||
((MODE) == GPIO_MODE_IT_FALLING) ||\
|
||||
((MODE) == GPIO_MODE_IT_RISING_FALLING) ||\
|
||||
((MODE) == GPIO_MODE_EVT_RISING) ||\
|
||||
((MODE) == GPIO_MODE_EVT_FALLING) ||\
|
||||
((MODE) == GPIO_MODE_EVT_RISING_FALLING) ||\
|
||||
((MODE) == GPIO_MODE_ANALOG))
|
||||
#define IS_GPIO_SPEED(SPEED) (((SPEED) == GPIO_SPEED_FREQ_LOW) || ((SPEED) == GPIO_SPEED_FREQ_MEDIUM) || \
|
||||
((SPEED) == GPIO_SPEED_FREQ_HIGH) || ((SPEED) == GPIO_SPEED_FREQ_VERY_HIGH))
|
||||
#define IS_GPIO_PULL(PULL) (((PULL) == GPIO_NOPULL) || ((PULL) == GPIO_PULLUP) || \
|
||||
((PULL) == GPIO_PULLDOWN))
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Private functions ---------------------------------------------------------*/
|
||||
/** @defgroup GPIO_Private_Functions GPIO Private Functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* __STM32F4xx_HAL_GPIO_H */
|
||||
|
||||
|
|
|
|||
File diff suppressed because it is too large
Load diff
|
|
@ -1,431 +1,436 @@
|
|||
/**
|
||||
******************************************************************************
|
||||
* @file stm32f4xx_hal_pwr.h
|
||||
* @author MCD Application Team
|
||||
* @brief Header file of PWR HAL module.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* <h2><center>© Copyright (c) 2017 STMicroelectronics.
|
||||
* All rights reserved.</center></h2>
|
||||
*
|
||||
* This software component is licensed by ST under BSD 3-Clause license,
|
||||
* the "License"; You may not use this file except in compliance with the
|
||||
* License. You may obtain a copy of the License at:
|
||||
* opensource.org/licenses/BSD-3-Clause
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef __STM32F4xx_HAL_PWR_H
|
||||
#define __STM32F4xx_HAL_PWR_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "stm32f4xx_hal_def.h"
|
||||
|
||||
/** @addtogroup STM32F4xx_HAL_Driver
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup PWR
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* Exported types ------------------------------------------------------------*/
|
||||
|
||||
/** @defgroup PWR_Exported_Types PWR Exported Types
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief PWR PVD configuration structure definition
|
||||
*/
|
||||
typedef struct
|
||||
{
|
||||
uint32_t PVDLevel; /*!< PVDLevel: Specifies the PVD detection level.
|
||||
This parameter can be a value of @ref PWR_PVD_detection_level */
|
||||
|
||||
uint32_t Mode; /*!< Mode: Specifies the operating mode for the selected pins.
|
||||
This parameter can be a value of @ref PWR_PVD_Mode */
|
||||
}PWR_PVDTypeDef;
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported constants --------------------------------------------------------*/
|
||||
/** @defgroup PWR_Exported_Constants PWR Exported Constants
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup PWR_WakeUp_Pins PWR WakeUp Pins
|
||||
* @{
|
||||
*/
|
||||
#define PWR_WAKEUP_PIN1 0x00000100U
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup PWR_PVD_detection_level PWR PVD detection level
|
||||
* @{
|
||||
*/
|
||||
#define PWR_PVDLEVEL_0 PWR_CR_PLS_LEV0
|
||||
#define PWR_PVDLEVEL_1 PWR_CR_PLS_LEV1
|
||||
#define PWR_PVDLEVEL_2 PWR_CR_PLS_LEV2
|
||||
#define PWR_PVDLEVEL_3 PWR_CR_PLS_LEV3
|
||||
#define PWR_PVDLEVEL_4 PWR_CR_PLS_LEV4
|
||||
#define PWR_PVDLEVEL_5 PWR_CR_PLS_LEV5
|
||||
#define PWR_PVDLEVEL_6 PWR_CR_PLS_LEV6
|
||||
#define PWR_PVDLEVEL_7 PWR_CR_PLS_LEV7/* External input analog voltage
|
||||
(Compare internally to VREFINT) */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup PWR_PVD_Mode PWR PVD Mode
|
||||
* @{
|
||||
*/
|
||||
#define PWR_PVD_MODE_NORMAL 0x00000000U /*!< basic mode is used */
|
||||
#define PWR_PVD_MODE_IT_RISING 0x00010001U /*!< External Interrupt Mode with Rising edge trigger detection */
|
||||
#define PWR_PVD_MODE_IT_FALLING 0x00010002U /*!< External Interrupt Mode with Falling edge trigger detection */
|
||||
#define PWR_PVD_MODE_IT_RISING_FALLING 0x00010003U /*!< External Interrupt Mode with Rising/Falling edge trigger detection */
|
||||
#define PWR_PVD_MODE_EVENT_RISING 0x00020001U /*!< Event Mode with Rising edge trigger detection */
|
||||
#define PWR_PVD_MODE_EVENT_FALLING 0x00020002U /*!< Event Mode with Falling edge trigger detection */
|
||||
#define PWR_PVD_MODE_EVENT_RISING_FALLING 0x00020003U /*!< Event Mode with Rising/Falling edge trigger detection */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
|
||||
/** @defgroup PWR_Regulator_state_in_STOP_mode PWR Regulator state in SLEEP/STOP mode
|
||||
* @{
|
||||
*/
|
||||
#define PWR_MAINREGULATOR_ON 0x00000000U
|
||||
#define PWR_LOWPOWERREGULATOR_ON PWR_CR_LPDS
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup PWR_SLEEP_mode_entry PWR SLEEP mode entry
|
||||
* @{
|
||||
*/
|
||||
#define PWR_SLEEPENTRY_WFI ((uint8_t)0x01)
|
||||
#define PWR_SLEEPENTRY_WFE ((uint8_t)0x02)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup PWR_STOP_mode_entry PWR STOP mode entry
|
||||
* @{
|
||||
*/
|
||||
#define PWR_STOPENTRY_WFI ((uint8_t)0x01)
|
||||
#define PWR_STOPENTRY_WFE ((uint8_t)0x02)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup PWR_Flag PWR Flag
|
||||
* @{
|
||||
*/
|
||||
#define PWR_FLAG_WU PWR_CSR_WUF
|
||||
#define PWR_FLAG_SB PWR_CSR_SBF
|
||||
#define PWR_FLAG_PVDO PWR_CSR_PVDO
|
||||
#define PWR_FLAG_BRR PWR_CSR_BRR
|
||||
#define PWR_FLAG_VOSRDY PWR_CSR_VOSRDY
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported macro ------------------------------------------------------------*/
|
||||
/** @defgroup PWR_Exported_Macro PWR Exported Macro
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @brief Check PWR flag is set or not.
|
||||
* @param __FLAG__ specifies the flag to check.
|
||||
* This parameter can be one of the following values:
|
||||
* @arg PWR_FLAG_WU: Wake Up flag. This flag indicates that a wakeup event
|
||||
* was received from the WKUP pin or from the RTC alarm (Alarm A
|
||||
* or Alarm B), RTC Tamper event, RTC TimeStamp event or RTC Wakeup.
|
||||
* An additional wakeup event is detected if the WKUP pin is enabled
|
||||
* (by setting the EWUP bit) when the WKUP pin level is already high.
|
||||
* @arg PWR_FLAG_SB: StandBy flag. This flag indicates that the system was
|
||||
* resumed from StandBy mode.
|
||||
* @arg PWR_FLAG_PVDO: PVD Output. This flag is valid only if PVD is enabled
|
||||
* by the HAL_PWR_EnablePVD() function. The PVD is stopped by Standby mode
|
||||
* For this reason, this bit is equal to 0 after Standby or reset
|
||||
* until the PVDE bit is set.
|
||||
* @arg PWR_FLAG_BRR: Backup regulator ready flag. This bit is not reset
|
||||
* when the device wakes up from Standby mode or by a system reset
|
||||
* or power reset.
|
||||
* @arg PWR_FLAG_VOSRDY: This flag indicates that the Regulator voltage
|
||||
* scaling output selection is ready.
|
||||
* @retval The new state of __FLAG__ (TRUE or FALSE).
|
||||
*/
|
||||
#define __HAL_PWR_GET_FLAG(__FLAG__) ((PWR->CSR & (__FLAG__)) == (__FLAG__))
|
||||
|
||||
/** @brief Clear the PWR's pending flags.
|
||||
* @param __FLAG__ specifies the flag to clear.
|
||||
* This parameter can be one of the following values:
|
||||
* @arg PWR_FLAG_WU: Wake Up flag
|
||||
* @arg PWR_FLAG_SB: StandBy flag
|
||||
*/
|
||||
#define __HAL_PWR_CLEAR_FLAG(__FLAG__) (PWR->CR |= (__FLAG__) << 2U)
|
||||
|
||||
/**
|
||||
* @brief Enable the PVD Exti Line 16.
|
||||
* @retval None.
|
||||
*/
|
||||
#define __HAL_PWR_PVD_EXTI_ENABLE_IT() (EXTI->IMR |= (PWR_EXTI_LINE_PVD))
|
||||
|
||||
/**
|
||||
* @brief Disable the PVD EXTI Line 16.
|
||||
* @retval None.
|
||||
*/
|
||||
#define __HAL_PWR_PVD_EXTI_DISABLE_IT() (EXTI->IMR &= ~(PWR_EXTI_LINE_PVD))
|
||||
|
||||
/**
|
||||
* @brief Enable event on PVD Exti Line 16.
|
||||
* @retval None.
|
||||
*/
|
||||
#define __HAL_PWR_PVD_EXTI_ENABLE_EVENT() (EXTI->EMR |= (PWR_EXTI_LINE_PVD))
|
||||
|
||||
/**
|
||||
* @brief Disable event on PVD Exti Line 16.
|
||||
* @retval None.
|
||||
*/
|
||||
#define __HAL_PWR_PVD_EXTI_DISABLE_EVENT() (EXTI->EMR &= ~(PWR_EXTI_LINE_PVD))
|
||||
|
||||
/**
|
||||
* @brief Enable the PVD Extended Interrupt Rising Trigger.
|
||||
* @retval None.
|
||||
*/
|
||||
#define __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE() SET_BIT(EXTI->RTSR, PWR_EXTI_LINE_PVD)
|
||||
|
||||
/**
|
||||
* @brief Disable the PVD Extended Interrupt Rising Trigger.
|
||||
* @retval None.
|
||||
*/
|
||||
#define __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE() CLEAR_BIT(EXTI->RTSR, PWR_EXTI_LINE_PVD)
|
||||
|
||||
/**
|
||||
* @brief Enable the PVD Extended Interrupt Falling Trigger.
|
||||
* @retval None.
|
||||
*/
|
||||
#define __HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE() SET_BIT(EXTI->FTSR, PWR_EXTI_LINE_PVD)
|
||||
|
||||
|
||||
/**
|
||||
* @brief Disable the PVD Extended Interrupt Falling Trigger.
|
||||
* @retval None.
|
||||
*/
|
||||
#define __HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE() CLEAR_BIT(EXTI->FTSR, PWR_EXTI_LINE_PVD)
|
||||
|
||||
|
||||
/**
|
||||
* @brief PVD EXTI line configuration: set rising & falling edge trigger.
|
||||
* @retval None.
|
||||
*/
|
||||
#define __HAL_PWR_PVD_EXTI_ENABLE_RISING_FALLING_EDGE() do{__HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE();\
|
||||
__HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE();\
|
||||
}while(0U)
|
||||
|
||||
/**
|
||||
* @brief Disable the PVD Extended Interrupt Rising & Falling Trigger.
|
||||
* This parameter can be:
|
||||
* @retval None.
|
||||
*/
|
||||
#define __HAL_PWR_PVD_EXTI_DISABLE_RISING_FALLING_EDGE() do{__HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE();\
|
||||
__HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE();\
|
||||
}while(0U)
|
||||
|
||||
/**
|
||||
* @brief checks whether the specified PVD Exti interrupt flag is set or not.
|
||||
* @retval EXTI PVD Line Status.
|
||||
*/
|
||||
#define __HAL_PWR_PVD_EXTI_GET_FLAG() (EXTI->PR & (PWR_EXTI_LINE_PVD))
|
||||
|
||||
/**
|
||||
* @brief Clear the PVD Exti flag.
|
||||
* @retval None.
|
||||
*/
|
||||
#define __HAL_PWR_PVD_EXTI_CLEAR_FLAG() (EXTI->PR = (PWR_EXTI_LINE_PVD))
|
||||
|
||||
/**
|
||||
* @brief Generates a Software interrupt on PVD EXTI line.
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_PWR_PVD_EXTI_GENERATE_SWIT() (EXTI->SWIER |= (PWR_EXTI_LINE_PVD))
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Include PWR HAL Extension module */
|
||||
#include "stm32f4xx_hal_pwr_ex.h"
|
||||
|
||||
/* Exported functions --------------------------------------------------------*/
|
||||
/** @addtogroup PWR_Exported_Functions PWR Exported Functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup PWR_Exported_Functions_Group1 Initialization and de-initialization functions
|
||||
* @{
|
||||
*/
|
||||
/* Initialization and de-initialization functions *****************************/
|
||||
void HAL_PWR_DeInit(void);
|
||||
void HAL_PWR_EnableBkUpAccess(void);
|
||||
void HAL_PWR_DisableBkUpAccess(void);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup PWR_Exported_Functions_Group2 Peripheral Control functions
|
||||
* @{
|
||||
*/
|
||||
/* Peripheral Control functions **********************************************/
|
||||
/* PVD configuration */
|
||||
void HAL_PWR_ConfigPVD(PWR_PVDTypeDef *sConfigPVD);
|
||||
void HAL_PWR_EnablePVD(void);
|
||||
void HAL_PWR_DisablePVD(void);
|
||||
|
||||
/* WakeUp pins configuration */
|
||||
void HAL_PWR_EnableWakeUpPin(uint32_t WakeUpPinx);
|
||||
void HAL_PWR_DisableWakeUpPin(uint32_t WakeUpPinx);
|
||||
|
||||
/* Low Power modes entry */
|
||||
void HAL_PWR_EnterSTOPMode(uint32_t Regulator, uint8_t STOPEntry);
|
||||
void HAL_PWR_EnterSLEEPMode(uint32_t Regulator, uint8_t SLEEPEntry);
|
||||
void HAL_PWR_EnterSTANDBYMode(void);
|
||||
|
||||
/* Power PVD IRQ Handler */
|
||||
void HAL_PWR_PVD_IRQHandler(void);
|
||||
void HAL_PWR_PVDCallback(void);
|
||||
|
||||
/* Cortex System Control functions *******************************************/
|
||||
void HAL_PWR_EnableSleepOnExit(void);
|
||||
void HAL_PWR_DisableSleepOnExit(void);
|
||||
void HAL_PWR_EnableSEVOnPend(void);
|
||||
void HAL_PWR_DisableSEVOnPend(void);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Private types -------------------------------------------------------------*/
|
||||
/* Private variables ---------------------------------------------------------*/
|
||||
/* Private constants ---------------------------------------------------------*/
|
||||
/** @defgroup PWR_Private_Constants PWR Private Constants
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup PWR_PVD_EXTI_Line PWR PVD EXTI Line
|
||||
* @{
|
||||
*/
|
||||
#define PWR_EXTI_LINE_PVD ((uint32_t)EXTI_IMR_MR16) /*!< External interrupt line 16 Connected to the PVD EXTI Line */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup PWR_register_alias_address PWR Register alias address
|
||||
* @{
|
||||
*/
|
||||
/* ------------- PWR registers bit address in the alias region ---------------*/
|
||||
#define PWR_OFFSET (PWR_BASE - PERIPH_BASE)
|
||||
#define PWR_CR_OFFSET 0x00U
|
||||
#define PWR_CSR_OFFSET 0x04U
|
||||
#define PWR_CR_OFFSET_BB (PWR_OFFSET + PWR_CR_OFFSET)
|
||||
#define PWR_CSR_OFFSET_BB (PWR_OFFSET + PWR_CSR_OFFSET)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup PWR_CR_register_alias PWR CR Register alias address
|
||||
* @{
|
||||
*/
|
||||
/* --- CR Register ---*/
|
||||
/* Alias word address of DBP bit */
|
||||
#define DBP_BIT_NUMBER PWR_CR_DBP_Pos
|
||||
#define CR_DBP_BB (uint32_t)(PERIPH_BB_BASE + (PWR_CR_OFFSET_BB * 32U) + (DBP_BIT_NUMBER * 4U))
|
||||
|
||||
/* Alias word address of PVDE bit */
|
||||
#define PVDE_BIT_NUMBER PWR_CR_PVDE_Pos
|
||||
#define CR_PVDE_BB (uint32_t)(PERIPH_BB_BASE + (PWR_CR_OFFSET_BB * 32U) + (PVDE_BIT_NUMBER * 4U))
|
||||
|
||||
/* Alias word address of VOS bit */
|
||||
#define VOS_BIT_NUMBER PWR_CR_VOS_Pos
|
||||
#define CR_VOS_BB (uint32_t)(PERIPH_BB_BASE + (PWR_CR_OFFSET_BB * 32U) + (VOS_BIT_NUMBER * 4U))
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup PWR_CSR_register_alias PWR CSR Register alias address
|
||||
* @{
|
||||
*/
|
||||
/* --- CSR Register ---*/
|
||||
/* Alias word address of EWUP bit */
|
||||
#define EWUP_BIT_NUMBER PWR_CSR_EWUP_Pos
|
||||
#define CSR_EWUP_BB (PERIPH_BB_BASE + (PWR_CSR_OFFSET_BB * 32U) + (EWUP_BIT_NUMBER * 4U))
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
/* Private macros ------------------------------------------------------------*/
|
||||
/** @defgroup PWR_Private_Macros PWR Private Macros
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup PWR_IS_PWR_Definitions PWR Private macros to check input parameters
|
||||
* @{
|
||||
*/
|
||||
#define IS_PWR_PVD_LEVEL(LEVEL) (((LEVEL) == PWR_PVDLEVEL_0) || ((LEVEL) == PWR_PVDLEVEL_1)|| \
|
||||
((LEVEL) == PWR_PVDLEVEL_2) || ((LEVEL) == PWR_PVDLEVEL_3)|| \
|
||||
((LEVEL) == PWR_PVDLEVEL_4) || ((LEVEL) == PWR_PVDLEVEL_5)|| \
|
||||
((LEVEL) == PWR_PVDLEVEL_6) || ((LEVEL) == PWR_PVDLEVEL_7))
|
||||
#define IS_PWR_PVD_MODE(MODE) (((MODE) == PWR_PVD_MODE_IT_RISING)|| ((MODE) == PWR_PVD_MODE_IT_FALLING) || \
|
||||
((MODE) == PWR_PVD_MODE_IT_RISING_FALLING) || ((MODE) == PWR_PVD_MODE_EVENT_RISING) || \
|
||||
((MODE) == PWR_PVD_MODE_EVENT_FALLING) || ((MODE) == PWR_PVD_MODE_EVENT_RISING_FALLING) || \
|
||||
((MODE) == PWR_PVD_MODE_NORMAL))
|
||||
#define IS_PWR_REGULATOR(REGULATOR) (((REGULATOR) == PWR_MAINREGULATOR_ON) || \
|
||||
((REGULATOR) == PWR_LOWPOWERREGULATOR_ON))
|
||||
#define IS_PWR_SLEEP_ENTRY(ENTRY) (((ENTRY) == PWR_SLEEPENTRY_WFI) || ((ENTRY) == PWR_SLEEPENTRY_WFE))
|
||||
#define IS_PWR_STOP_ENTRY(ENTRY) (((ENTRY) == PWR_STOPENTRY_WFI) || ((ENTRY) == PWR_STOPENTRY_WFE))
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
|
||||
#endif /* __STM32F4xx_HAL_PWR_H */
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file stm32f4xx_hal_pwr.h
|
||||
* @author MCD Application Team
|
||||
* @brief Header file of PWR HAL module.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* Copyright (c) 2017 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software is licensed under terms that can be found in the LICENSE file in
|
||||
* the root directory of this software component.
|
||||
* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef __STM32F4xx_HAL_PWR_H
|
||||
#define __STM32F4xx_HAL_PWR_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "stm32f4xx_hal_def.h"
|
||||
|
||||
/** @addtogroup STM32F4xx_HAL_Driver
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup PWR
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* Exported types ------------------------------------------------------------*/
|
||||
|
||||
/** @defgroup PWR_Exported_Types PWR Exported Types
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief PWR PVD configuration structure definition
|
||||
*/
|
||||
typedef struct
|
||||
{
|
||||
uint32_t PVDLevel; /*!< PVDLevel: Specifies the PVD detection level.
|
||||
This parameter can be a value of @ref PWR_PVD_detection_level */
|
||||
|
||||
uint32_t Mode; /*!< Mode: Specifies the operating mode for the selected pins.
|
||||
This parameter can be a value of @ref PWR_PVD_Mode */
|
||||
}PWR_PVDTypeDef;
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported constants --------------------------------------------------------*/
|
||||
/** @defgroup PWR_Exported_Constants PWR Exported Constants
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup PWR_WakeUp_Pins PWR WakeUp Pins
|
||||
* @{
|
||||
*/
|
||||
#define PWR_WAKEUP_PIN1 0x00000100U
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup PWR_PVD_detection_level PWR PVD detection level
|
||||
* @{
|
||||
*/
|
||||
#define PWR_PVDLEVEL_0 PWR_CR_PLS_LEV0
|
||||
#define PWR_PVDLEVEL_1 PWR_CR_PLS_LEV1
|
||||
#define PWR_PVDLEVEL_2 PWR_CR_PLS_LEV2
|
||||
#define PWR_PVDLEVEL_3 PWR_CR_PLS_LEV3
|
||||
#define PWR_PVDLEVEL_4 PWR_CR_PLS_LEV4
|
||||
#define PWR_PVDLEVEL_5 PWR_CR_PLS_LEV5
|
||||
#define PWR_PVDLEVEL_6 PWR_CR_PLS_LEV6
|
||||
#define PWR_PVDLEVEL_7 PWR_CR_PLS_LEV7/* External input analog voltage
|
||||
(Compare internally to VREFINT) */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup PWR_PVD_Mode PWR PVD Mode
|
||||
* @{
|
||||
*/
|
||||
#define PWR_PVD_MODE_NORMAL 0x00000000U /*!< basic mode is used */
|
||||
#define PWR_PVD_MODE_IT_RISING 0x00010001U /*!< External Interrupt Mode with Rising edge trigger detection */
|
||||
#define PWR_PVD_MODE_IT_FALLING 0x00010002U /*!< External Interrupt Mode with Falling edge trigger detection */
|
||||
#define PWR_PVD_MODE_IT_RISING_FALLING 0x00010003U /*!< External Interrupt Mode with Rising/Falling edge trigger detection */
|
||||
#define PWR_PVD_MODE_EVENT_RISING 0x00020001U /*!< Event Mode with Rising edge trigger detection */
|
||||
#define PWR_PVD_MODE_EVENT_FALLING 0x00020002U /*!< Event Mode with Falling edge trigger detection */
|
||||
#define PWR_PVD_MODE_EVENT_RISING_FALLING 0x00020003U /*!< Event Mode with Rising/Falling edge trigger detection */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
|
||||
/** @defgroup PWR_Regulator_state_in_STOP_mode PWR Regulator state in SLEEP/STOP mode
|
||||
* @{
|
||||
*/
|
||||
#define PWR_MAINREGULATOR_ON 0x00000000U
|
||||
#define PWR_LOWPOWERREGULATOR_ON PWR_CR_LPDS
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup PWR_SLEEP_mode_entry PWR SLEEP mode entry
|
||||
* @{
|
||||
*/
|
||||
#define PWR_SLEEPENTRY_WFI ((uint8_t)0x01)
|
||||
#define PWR_SLEEPENTRY_WFE ((uint8_t)0x02)
|
||||
#define PWR_SLEEPENTRY_WFE_NO_EVT_CLEAR ((uint8_t)0x03)
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup PWR_STOP_mode_entry PWR STOP mode entry
|
||||
* @{
|
||||
*/
|
||||
#define PWR_STOPENTRY_WFI ((uint8_t)0x01)
|
||||
#define PWR_STOPENTRY_WFE ((uint8_t)0x02)
|
||||
#define PWR_STOPENTRY_WFE_NO_EVT_CLEAR ((uint8_t)0x03)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup PWR_Flag PWR Flag
|
||||
* @{
|
||||
*/
|
||||
#define PWR_FLAG_WU PWR_CSR_WUF
|
||||
#define PWR_FLAG_SB PWR_CSR_SBF
|
||||
#define PWR_FLAG_PVDO PWR_CSR_PVDO
|
||||
#define PWR_FLAG_BRR PWR_CSR_BRR
|
||||
#define PWR_FLAG_VOSRDY PWR_CSR_VOSRDY
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported macro ------------------------------------------------------------*/
|
||||
/** @defgroup PWR_Exported_Macro PWR Exported Macro
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @brief Check PWR flag is set or not.
|
||||
* @param __FLAG__ specifies the flag to check.
|
||||
* This parameter can be one of the following values:
|
||||
* @arg PWR_FLAG_WU: Wake Up flag. This flag indicates that a wakeup event
|
||||
* was received from the WKUP pin or from the RTC alarm (Alarm A
|
||||
* or Alarm B), RTC Tamper event, RTC TimeStamp event or RTC Wakeup.
|
||||
* An additional wakeup event is detected if the WKUP pin is enabled
|
||||
* (by setting the EWUP bit) when the WKUP pin level is already high.
|
||||
* @arg PWR_FLAG_SB: StandBy flag. This flag indicates that the system was
|
||||
* resumed from StandBy mode.
|
||||
* @arg PWR_FLAG_PVDO: PVD Output. This flag is valid only if PVD is enabled
|
||||
* by the HAL_PWR_EnablePVD() function. The PVD is stopped by Standby mode
|
||||
* For this reason, this bit is equal to 0 after Standby or reset
|
||||
* until the PVDE bit is set.
|
||||
* @arg PWR_FLAG_BRR: Backup regulator ready flag. This bit is not reset
|
||||
* when the device wakes up from Standby mode or by a system reset
|
||||
* or power reset.
|
||||
* @arg PWR_FLAG_VOSRDY: This flag indicates that the Regulator voltage
|
||||
* scaling output selection is ready.
|
||||
* @retval The new state of __FLAG__ (TRUE or FALSE).
|
||||
*/
|
||||
#define __HAL_PWR_GET_FLAG(__FLAG__) ((PWR->CSR & (__FLAG__)) == (__FLAG__))
|
||||
|
||||
/** @brief Clear the PWR's pending flags.
|
||||
* @param __FLAG__ specifies the flag to clear.
|
||||
* This parameter can be one of the following values:
|
||||
* @arg PWR_FLAG_WU: Wake Up flag
|
||||
* @arg PWR_FLAG_SB: StandBy flag
|
||||
*/
|
||||
#define __HAL_PWR_CLEAR_FLAG(__FLAG__) (PWR->CR |= (__FLAG__) << 2U)
|
||||
|
||||
/**
|
||||
* @brief Enable the PVD Exti Line 16.
|
||||
* @retval None.
|
||||
*/
|
||||
#define __HAL_PWR_PVD_EXTI_ENABLE_IT() (EXTI->IMR |= (PWR_EXTI_LINE_PVD))
|
||||
|
||||
/**
|
||||
* @brief Disable the PVD EXTI Line 16.
|
||||
* @retval None.
|
||||
*/
|
||||
#define __HAL_PWR_PVD_EXTI_DISABLE_IT() (EXTI->IMR &= ~(PWR_EXTI_LINE_PVD))
|
||||
|
||||
/**
|
||||
* @brief Enable event on PVD Exti Line 16.
|
||||
* @retval None.
|
||||
*/
|
||||
#define __HAL_PWR_PVD_EXTI_ENABLE_EVENT() (EXTI->EMR |= (PWR_EXTI_LINE_PVD))
|
||||
|
||||
/**
|
||||
* @brief Disable event on PVD Exti Line 16.
|
||||
* @retval None.
|
||||
*/
|
||||
#define __HAL_PWR_PVD_EXTI_DISABLE_EVENT() (EXTI->EMR &= ~(PWR_EXTI_LINE_PVD))
|
||||
|
||||
/**
|
||||
* @brief Enable the PVD Extended Interrupt Rising Trigger.
|
||||
* @retval None.
|
||||
*/
|
||||
#define __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE() SET_BIT(EXTI->RTSR, PWR_EXTI_LINE_PVD)
|
||||
|
||||
/**
|
||||
* @brief Disable the PVD Extended Interrupt Rising Trigger.
|
||||
* @retval None.
|
||||
*/
|
||||
#define __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE() CLEAR_BIT(EXTI->RTSR, PWR_EXTI_LINE_PVD)
|
||||
|
||||
/**
|
||||
* @brief Enable the PVD Extended Interrupt Falling Trigger.
|
||||
* @retval None.
|
||||
*/
|
||||
#define __HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE() SET_BIT(EXTI->FTSR, PWR_EXTI_LINE_PVD)
|
||||
|
||||
|
||||
/**
|
||||
* @brief Disable the PVD Extended Interrupt Falling Trigger.
|
||||
* @retval None.
|
||||
*/
|
||||
#define __HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE() CLEAR_BIT(EXTI->FTSR, PWR_EXTI_LINE_PVD)
|
||||
|
||||
|
||||
/**
|
||||
* @brief PVD EXTI line configuration: set rising & falling edge trigger.
|
||||
* @retval None.
|
||||
*/
|
||||
#define __HAL_PWR_PVD_EXTI_ENABLE_RISING_FALLING_EDGE() do{__HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE();\
|
||||
__HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE();\
|
||||
}while(0U)
|
||||
|
||||
/**
|
||||
* @brief Disable the PVD Extended Interrupt Rising & Falling Trigger.
|
||||
* This parameter can be:
|
||||
* @retval None.
|
||||
*/
|
||||
#define __HAL_PWR_PVD_EXTI_DISABLE_RISING_FALLING_EDGE() do{__HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE();\
|
||||
__HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE();\
|
||||
}while(0U)
|
||||
|
||||
/**
|
||||
* @brief checks whether the specified PVD Exti interrupt flag is set or not.
|
||||
* @retval EXTI PVD Line Status.
|
||||
*/
|
||||
#define __HAL_PWR_PVD_EXTI_GET_FLAG() (EXTI->PR & (PWR_EXTI_LINE_PVD))
|
||||
|
||||
/**
|
||||
* @brief Clear the PVD Exti flag.
|
||||
* @retval None.
|
||||
*/
|
||||
#define __HAL_PWR_PVD_EXTI_CLEAR_FLAG() (EXTI->PR = (PWR_EXTI_LINE_PVD))
|
||||
|
||||
/**
|
||||
* @brief Generates a Software interrupt on PVD EXTI line.
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_PWR_PVD_EXTI_GENERATE_SWIT() (EXTI->SWIER |= (PWR_EXTI_LINE_PVD))
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Include PWR HAL Extension module */
|
||||
#include "stm32f4xx_hal_pwr_ex.h"
|
||||
|
||||
/* Exported functions --------------------------------------------------------*/
|
||||
/** @addtogroup PWR_Exported_Functions PWR Exported Functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup PWR_Exported_Functions_Group1 Initialization and de-initialization functions
|
||||
* @{
|
||||
*/
|
||||
/* Initialization and de-initialization functions *****************************/
|
||||
void HAL_PWR_DeInit(void);
|
||||
void HAL_PWR_EnableBkUpAccess(void);
|
||||
void HAL_PWR_DisableBkUpAccess(void);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup PWR_Exported_Functions_Group2 Peripheral Control functions
|
||||
* @{
|
||||
*/
|
||||
/* Peripheral Control functions **********************************************/
|
||||
/* PVD configuration */
|
||||
void HAL_PWR_ConfigPVD(PWR_PVDTypeDef *sConfigPVD);
|
||||
void HAL_PWR_EnablePVD(void);
|
||||
void HAL_PWR_DisablePVD(void);
|
||||
|
||||
/* WakeUp pins configuration */
|
||||
void HAL_PWR_EnableWakeUpPin(uint32_t WakeUpPinx);
|
||||
void HAL_PWR_DisableWakeUpPin(uint32_t WakeUpPinx);
|
||||
|
||||
/* Low Power modes entry */
|
||||
void HAL_PWR_EnterSTOPMode(uint32_t Regulator, uint8_t STOPEntry);
|
||||
void HAL_PWR_EnterSLEEPMode(uint32_t Regulator, uint8_t SLEEPEntry);
|
||||
void HAL_PWR_EnterSTANDBYMode(void);
|
||||
|
||||
/* Power PVD IRQ Handler */
|
||||
void HAL_PWR_PVD_IRQHandler(void);
|
||||
void HAL_PWR_PVDCallback(void);
|
||||
|
||||
/* Cortex System Control functions *******************************************/
|
||||
void HAL_PWR_EnableSleepOnExit(void);
|
||||
void HAL_PWR_DisableSleepOnExit(void);
|
||||
void HAL_PWR_EnableSEVOnPend(void);
|
||||
void HAL_PWR_DisableSEVOnPend(void);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Private types -------------------------------------------------------------*/
|
||||
/* Private variables ---------------------------------------------------------*/
|
||||
/* Private constants ---------------------------------------------------------*/
|
||||
/** @defgroup PWR_Private_Constants PWR Private Constants
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup PWR_PVD_EXTI_Line PWR PVD EXTI Line
|
||||
* @{
|
||||
*/
|
||||
#define PWR_EXTI_LINE_PVD ((uint32_t)EXTI_IMR_MR16) /*!< External interrupt line 16 Connected to the PVD EXTI Line */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup PWR_register_alias_address PWR Register alias address
|
||||
* @{
|
||||
*/
|
||||
/* ------------- PWR registers bit address in the alias region ---------------*/
|
||||
#define PWR_OFFSET (PWR_BASE - PERIPH_BASE)
|
||||
#define PWR_CR_OFFSET 0x00U
|
||||
#define PWR_CSR_OFFSET 0x04U
|
||||
#define PWR_CR_OFFSET_BB (PWR_OFFSET + PWR_CR_OFFSET)
|
||||
#define PWR_CSR_OFFSET_BB (PWR_OFFSET + PWR_CSR_OFFSET)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup PWR_CR_register_alias PWR CR Register alias address
|
||||
* @{
|
||||
*/
|
||||
/* --- CR Register ---*/
|
||||
/* Alias word address of DBP bit */
|
||||
#define DBP_BIT_NUMBER PWR_CR_DBP_Pos
|
||||
#define CR_DBP_BB (uint32_t)(PERIPH_BB_BASE + (PWR_CR_OFFSET_BB * 32U) + (DBP_BIT_NUMBER * 4U))
|
||||
|
||||
/* Alias word address of PVDE bit */
|
||||
#define PVDE_BIT_NUMBER PWR_CR_PVDE_Pos
|
||||
#define CR_PVDE_BB (uint32_t)(PERIPH_BB_BASE + (PWR_CR_OFFSET_BB * 32U) + (PVDE_BIT_NUMBER * 4U))
|
||||
|
||||
/* Alias word address of VOS bit */
|
||||
#define VOS_BIT_NUMBER PWR_CR_VOS_Pos
|
||||
#define CR_VOS_BB (uint32_t)(PERIPH_BB_BASE + (PWR_CR_OFFSET_BB * 32U) + (VOS_BIT_NUMBER * 4U))
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup PWR_CSR_register_alias PWR CSR Register alias address
|
||||
* @{
|
||||
*/
|
||||
/* --- CSR Register ---*/
|
||||
/* Alias word address of EWUP bit */
|
||||
#define EWUP_BIT_NUMBER PWR_CSR_EWUP_Pos
|
||||
#define CSR_EWUP_BB (PERIPH_BB_BASE + (PWR_CSR_OFFSET_BB * 32U) + (EWUP_BIT_NUMBER * 4U))
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
/* Private macros ------------------------------------------------------------*/
|
||||
/** @defgroup PWR_Private_Macros PWR Private Macros
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup PWR_IS_PWR_Definitions PWR Private macros to check input parameters
|
||||
* @{
|
||||
*/
|
||||
#define IS_PWR_PVD_LEVEL(LEVEL) (((LEVEL) == PWR_PVDLEVEL_0) || ((LEVEL) == PWR_PVDLEVEL_1)|| \
|
||||
((LEVEL) == PWR_PVDLEVEL_2) || ((LEVEL) == PWR_PVDLEVEL_3)|| \
|
||||
((LEVEL) == PWR_PVDLEVEL_4) || ((LEVEL) == PWR_PVDLEVEL_5)|| \
|
||||
((LEVEL) == PWR_PVDLEVEL_6) || ((LEVEL) == PWR_PVDLEVEL_7))
|
||||
#define IS_PWR_PVD_MODE(MODE) (((MODE) == PWR_PVD_MODE_IT_RISING)|| ((MODE) == PWR_PVD_MODE_IT_FALLING) || \
|
||||
((MODE) == PWR_PVD_MODE_IT_RISING_FALLING) || ((MODE) == PWR_PVD_MODE_EVENT_RISING) || \
|
||||
((MODE) == PWR_PVD_MODE_EVENT_FALLING) || ((MODE) == PWR_PVD_MODE_EVENT_RISING_FALLING) || \
|
||||
((MODE) == PWR_PVD_MODE_NORMAL))
|
||||
#define IS_PWR_REGULATOR(REGULATOR) (((REGULATOR) == PWR_MAINREGULATOR_ON) || \
|
||||
((REGULATOR) == PWR_LOWPOWERREGULATOR_ON))
|
||||
|
||||
#define IS_PWR_SLEEP_ENTRY(ENTRY) (((ENTRY) == PWR_SLEEPENTRY_WFI) || \
|
||||
((ENTRY) == PWR_SLEEPENTRY_WFE) || \
|
||||
((ENTRY) == PWR_SLEEPENTRY_WFE_NO_EVT_CLEAR))
|
||||
|
||||
#define IS_PWR_STOP_ENTRY(ENTRY) (((ENTRY) == PWR_STOPENTRY_WFI) || \
|
||||
((ENTRY) == PWR_STOPENTRY_WFE) || \
|
||||
((ENTRY) == PWR_STOPENTRY_WFE_NO_EVT_CLEAR))
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
|
||||
#endif /* __STM32F4xx_HAL_PWR_H */
|
||||
|
|
|
|||
|
|
@ -1,344 +1,340 @@
|
|||
/**
|
||||
******************************************************************************
|
||||
* @file stm32f4xx_hal_pwr_ex.h
|
||||
* @author MCD Application Team
|
||||
* @brief Header file of PWR HAL Extension module.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* <h2><center>© Copyright (c) 2017 STMicroelectronics.
|
||||
* All rights reserved.</center></h2>
|
||||
*
|
||||
* This software component is licensed by ST under BSD 3-Clause license,
|
||||
* the "License"; You may not use this file except in compliance with the
|
||||
* License. You may obtain a copy of the License at:
|
||||
* opensource.org/licenses/BSD-3-Clause
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef __STM32F4xx_HAL_PWR_EX_H
|
||||
#define __STM32F4xx_HAL_PWR_EX_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "stm32f4xx_hal_def.h"
|
||||
|
||||
/** @addtogroup STM32F4xx_HAL_Driver
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup PWREx
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* Exported types ------------------------------------------------------------*/
|
||||
/* Exported constants --------------------------------------------------------*/
|
||||
/** @defgroup PWREx_Exported_Constants PWREx Exported Constants
|
||||
* @{
|
||||
*/
|
||||
#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\
|
||||
defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx)
|
||||
|
||||
/** @defgroup PWREx_Regulator_state_in_UnderDrive_mode PWREx Regulator state in UnderDrive mode
|
||||
* @{
|
||||
*/
|
||||
#define PWR_MAINREGULATOR_UNDERDRIVE_ON PWR_CR_MRUDS
|
||||
#define PWR_LOWPOWERREGULATOR_UNDERDRIVE_ON ((uint32_t)(PWR_CR_LPDS | PWR_CR_LPUDS))
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup PWREx_Over_Under_Drive_Flag PWREx Over Under Drive Flag
|
||||
* @{
|
||||
*/
|
||||
#define PWR_FLAG_ODRDY PWR_CSR_ODRDY
|
||||
#define PWR_FLAG_ODSWRDY PWR_CSR_ODSWRDY
|
||||
#define PWR_FLAG_UDRDY PWR_CSR_UDSWRDY
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx || STM32F469xx || STM32F479xx */
|
||||
|
||||
/** @defgroup PWREx_Regulator_Voltage_Scale PWREx Regulator Voltage Scale
|
||||
* @{
|
||||
*/
|
||||
#if defined(STM32F405xx) || defined(STM32F407xx) || defined(STM32F415xx) || defined(STM32F417xx)
|
||||
#define PWR_REGULATOR_VOLTAGE_SCALE1 PWR_CR_VOS /* Scale 1 mode(default value at reset): the maximum value of fHCLK = 168 MHz. */
|
||||
#define PWR_REGULATOR_VOLTAGE_SCALE2 0x00000000U /* Scale 2 mode: the maximum value of fHCLK = 144 MHz. */
|
||||
#else
|
||||
#define PWR_REGULATOR_VOLTAGE_SCALE1 PWR_CR_VOS /* Scale 1 mode(default value at reset): the maximum value of fHCLK is 168 MHz. It can be extended to
|
||||
180 MHz by activating the over-drive mode. */
|
||||
#define PWR_REGULATOR_VOLTAGE_SCALE2 PWR_CR_VOS_1 /* Scale 2 mode: the maximum value of fHCLK is 144 MHz. It can be extended to
|
||||
168 MHz by activating the over-drive mode. */
|
||||
#define PWR_REGULATOR_VOLTAGE_SCALE3 PWR_CR_VOS_0 /* Scale 3 mode: the maximum value of fHCLK is 120 MHz. */
|
||||
#endif /* STM32F405xx || STM32F407xx || STM32F415xx || STM32F417xx */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) || defined(STM32F446xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || \
|
||||
defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx)
|
||||
/** @defgroup PWREx_WakeUp_Pins PWREx WakeUp Pins
|
||||
* @{
|
||||
*/
|
||||
#define PWR_WAKEUP_PIN2 0x00000080U
|
||||
#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) || defined(STM32F412Zx) || defined(STM32F412Vx) || \
|
||||
defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx)
|
||||
#define PWR_WAKEUP_PIN3 0x00000040U
|
||||
#endif /* STM32F410xx || STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Zx || STM32F412Vx || \
|
||||
STM32F412Rx || STM32F412Cx || STM32F413xx || STM32F423xx */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
#endif /* STM32F410xx || STM32F446xx || STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx ||
|
||||
STM32F413xx || STM32F423xx */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported macro ------------------------------------------------------------*/
|
||||
/** @defgroup PWREx_Exported_Constants PWREx Exported Constants
|
||||
* @{
|
||||
*/
|
||||
|
||||
#if defined(STM32F405xx) || defined(STM32F407xx) || defined(STM32F415xx) || defined(STM32F417xx)
|
||||
/** @brief macros configure the main internal regulator output voltage.
|
||||
* @param __REGULATOR__ specifies the regulator output voltage to achieve
|
||||
* a tradeoff between performance and power consumption when the device does
|
||||
* not operate at the maximum frequency (refer to the datasheets for more details).
|
||||
* This parameter can be one of the following values:
|
||||
* @arg PWR_REGULATOR_VOLTAGE_SCALE1: Regulator voltage output Scale 1 mode
|
||||
* @arg PWR_REGULATOR_VOLTAGE_SCALE2: Regulator voltage output Scale 2 mode
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_PWR_VOLTAGESCALING_CONFIG(__REGULATOR__) do { \
|
||||
__IO uint32_t tmpreg = 0x00U; \
|
||||
MODIFY_REG(PWR->CR, PWR_CR_VOS, (__REGULATOR__)); \
|
||||
/* Delay after an RCC peripheral clock enabling */ \
|
||||
tmpreg = READ_BIT(PWR->CR, PWR_CR_VOS); \
|
||||
UNUSED(tmpreg); \
|
||||
} while(0U)
|
||||
#else
|
||||
/** @brief macros configure the main internal regulator output voltage.
|
||||
* @param __REGULATOR__ specifies the regulator output voltage to achieve
|
||||
* a tradeoff between performance and power consumption when the device does
|
||||
* not operate at the maximum frequency (refer to the datasheets for more details).
|
||||
* This parameter can be one of the following values:
|
||||
* @arg PWR_REGULATOR_VOLTAGE_SCALE1: Regulator voltage output Scale 1 mode
|
||||
* @arg PWR_REGULATOR_VOLTAGE_SCALE2: Regulator voltage output Scale 2 mode
|
||||
* @arg PWR_REGULATOR_VOLTAGE_SCALE3: Regulator voltage output Scale 3 mode
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_PWR_VOLTAGESCALING_CONFIG(__REGULATOR__) do { \
|
||||
__IO uint32_t tmpreg = 0x00U; \
|
||||
MODIFY_REG(PWR->CR, PWR_CR_VOS, (__REGULATOR__)); \
|
||||
/* Delay after an RCC peripheral clock enabling */ \
|
||||
tmpreg = READ_BIT(PWR->CR, PWR_CR_VOS); \
|
||||
UNUSED(tmpreg); \
|
||||
} while(0U)
|
||||
#endif /* STM32F405xx || STM32F407xx || STM32F415xx || STM32F417xx */
|
||||
|
||||
#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\
|
||||
defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx)
|
||||
/** @brief Macros to enable or disable the Over drive mode.
|
||||
* @note These macros can be used only for STM32F42xx/STM3243xx devices.
|
||||
*/
|
||||
#define __HAL_PWR_OVERDRIVE_ENABLE() (*(__IO uint32_t *) CR_ODEN_BB = ENABLE)
|
||||
#define __HAL_PWR_OVERDRIVE_DISABLE() (*(__IO uint32_t *) CR_ODEN_BB = DISABLE)
|
||||
|
||||
/** @brief Macros to enable or disable the Over drive switching.
|
||||
* @note These macros can be used only for STM32F42xx/STM3243xx devices.
|
||||
*/
|
||||
#define __HAL_PWR_OVERDRIVESWITCHING_ENABLE() (*(__IO uint32_t *) CR_ODSWEN_BB = ENABLE)
|
||||
#define __HAL_PWR_OVERDRIVESWITCHING_DISABLE() (*(__IO uint32_t *) CR_ODSWEN_BB = DISABLE)
|
||||
|
||||
/** @brief Macros to enable or disable the Under drive mode.
|
||||
* @note This mode is enabled only with STOP low power mode.
|
||||
* In this mode, the 1.2V domain is preserved in reduced leakage mode. This
|
||||
* mode is only available when the main regulator or the low power regulator
|
||||
* is in low voltage mode.
|
||||
* @note If the Under-drive mode was enabled, it is automatically disabled after
|
||||
* exiting Stop mode.
|
||||
* When the voltage regulator operates in Under-drive mode, an additional
|
||||
* startup delay is induced when waking up from Stop mode.
|
||||
*/
|
||||
#define __HAL_PWR_UNDERDRIVE_ENABLE() (PWR->CR |= (uint32_t)PWR_CR_UDEN)
|
||||
#define __HAL_PWR_UNDERDRIVE_DISABLE() (PWR->CR &= (uint32_t)(~PWR_CR_UDEN))
|
||||
|
||||
/** @brief Check PWR flag is set or not.
|
||||
* @note These macros can be used only for STM32F42xx/STM3243xx devices.
|
||||
* @param __FLAG__ specifies the flag to check.
|
||||
* This parameter can be one of the following values:
|
||||
* @arg PWR_FLAG_ODRDY: This flag indicates that the Over-drive mode
|
||||
* is ready
|
||||
* @arg PWR_FLAG_ODSWRDY: This flag indicates that the Over-drive mode
|
||||
* switching is ready
|
||||
* @arg PWR_FLAG_UDRDY: This flag indicates that the Under-drive mode
|
||||
* is enabled in Stop mode
|
||||
* @retval The new state of __FLAG__ (TRUE or FALSE).
|
||||
*/
|
||||
#define __HAL_PWR_GET_ODRUDR_FLAG(__FLAG__) ((PWR->CSR & (__FLAG__)) == (__FLAG__))
|
||||
|
||||
/** @brief Clear the Under-Drive Ready flag.
|
||||
* @note These macros can be used only for STM32F42xx/STM3243xx devices.
|
||||
*/
|
||||
#define __HAL_PWR_CLEAR_ODRUDR_FLAG() (PWR->CSR |= PWR_FLAG_UDRDY)
|
||||
|
||||
#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx || STM32F469xx || STM32F479xx */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported functions --------------------------------------------------------*/
|
||||
/** @addtogroup PWREx_Exported_Functions PWREx Exported Functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup PWREx_Exported_Functions_Group1
|
||||
* @{
|
||||
*/
|
||||
void HAL_PWREx_EnableFlashPowerDown(void);
|
||||
void HAL_PWREx_DisableFlashPowerDown(void);
|
||||
HAL_StatusTypeDef HAL_PWREx_EnableBkUpReg(void);
|
||||
HAL_StatusTypeDef HAL_PWREx_DisableBkUpReg(void);
|
||||
uint32_t HAL_PWREx_GetVoltageRange(void);
|
||||
HAL_StatusTypeDef HAL_PWREx_ControlVoltageScaling(uint32_t VoltageScaling);
|
||||
|
||||
#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) || defined(STM32F401xC) ||\
|
||||
defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F412Zx) || defined(STM32F412Vx) ||\
|
||||
defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx)
|
||||
void HAL_PWREx_EnableMainRegulatorLowVoltage(void);
|
||||
void HAL_PWREx_DisableMainRegulatorLowVoltage(void);
|
||||
void HAL_PWREx_EnableLowRegulatorLowVoltage(void);
|
||||
void HAL_PWREx_DisableLowRegulatorLowVoltage(void);
|
||||
#endif /* STM32F410xx || STM32F401xC || STM32F401xE || STM32F411xE || STM32F412Zx || STM32F412Vx ||\
|
||||
STM32F412Rx || STM32F412Cx || STM32F413xx || STM32F423xx */
|
||||
|
||||
#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F446xx) ||\
|
||||
defined(STM32F469xx) || defined(STM32F479xx)
|
||||
HAL_StatusTypeDef HAL_PWREx_EnableOverDrive(void);
|
||||
HAL_StatusTypeDef HAL_PWREx_DisableOverDrive(void);
|
||||
HAL_StatusTypeDef HAL_PWREx_EnterUnderDriveSTOPMode(uint32_t Regulator, uint8_t STOPEntry);
|
||||
#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx || STM32F469xx || STM32F479xx */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
/* Private types -------------------------------------------------------------*/
|
||||
/* Private variables ---------------------------------------------------------*/
|
||||
/* Private constants ---------------------------------------------------------*/
|
||||
/** @defgroup PWREx_Private_Constants PWREx Private Constants
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup PWREx_register_alias_address PWREx Register alias address
|
||||
* @{
|
||||
*/
|
||||
/* ------------- PWR registers bit address in the alias region ---------------*/
|
||||
/* --- CR Register ---*/
|
||||
/* Alias word address of FPDS bit */
|
||||
#define FPDS_BIT_NUMBER PWR_CR_FPDS_Pos
|
||||
#define CR_FPDS_BB (uint32_t)(PERIPH_BB_BASE + (PWR_CR_OFFSET_BB * 32U) + (FPDS_BIT_NUMBER * 4U))
|
||||
|
||||
/* Alias word address of ODEN bit */
|
||||
#define ODEN_BIT_NUMBER PWR_CR_ODEN_Pos
|
||||
#define CR_ODEN_BB (uint32_t)(PERIPH_BB_BASE + (PWR_CR_OFFSET_BB * 32U) + (ODEN_BIT_NUMBER * 4U))
|
||||
|
||||
/* Alias word address of ODSWEN bit */
|
||||
#define ODSWEN_BIT_NUMBER PWR_CR_ODSWEN_Pos
|
||||
#define CR_ODSWEN_BB (uint32_t)(PERIPH_BB_BASE + (PWR_CR_OFFSET_BB * 32U) + (ODSWEN_BIT_NUMBER * 4U))
|
||||
|
||||
/* Alias word address of MRLVDS bit */
|
||||
#define MRLVDS_BIT_NUMBER PWR_CR_MRLVDS_Pos
|
||||
#define CR_MRLVDS_BB (uint32_t)(PERIPH_BB_BASE + (PWR_CR_OFFSET_BB * 32U) + (MRLVDS_BIT_NUMBER * 4U))
|
||||
|
||||
/* Alias word address of LPLVDS bit */
|
||||
#define LPLVDS_BIT_NUMBER PWR_CR_LPLVDS_Pos
|
||||
#define CR_LPLVDS_BB (uint32_t)(PERIPH_BB_BASE + (PWR_CR_OFFSET_BB * 32U) + (LPLVDS_BIT_NUMBER * 4U))
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup PWREx_CSR_register_alias PWRx CSR Register alias address
|
||||
* @{
|
||||
*/
|
||||
/* --- CSR Register ---*/
|
||||
/* Alias word address of BRE bit */
|
||||
#define BRE_BIT_NUMBER PWR_CSR_BRE_Pos
|
||||
#define CSR_BRE_BB (uint32_t)(PERIPH_BB_BASE + (PWR_CSR_OFFSET_BB * 32U) + (BRE_BIT_NUMBER * 4U))
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Private macros ------------------------------------------------------------*/
|
||||
/** @defgroup PWREx_Private_Macros PWREx Private Macros
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup PWREx_IS_PWR_Definitions PWREx Private macros to check input parameters
|
||||
* @{
|
||||
*/
|
||||
#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\
|
||||
defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx)
|
||||
#define IS_PWR_REGULATOR_UNDERDRIVE(REGULATOR) (((REGULATOR) == PWR_MAINREGULATOR_UNDERDRIVE_ON) || \
|
||||
((REGULATOR) == PWR_LOWPOWERREGULATOR_UNDERDRIVE_ON))
|
||||
#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx || STM32F469xx || STM32F479xx */
|
||||
|
||||
#if defined(STM32F405xx) || defined(STM32F407xx) || defined(STM32F415xx) || defined(STM32F417xx)
|
||||
#define IS_PWR_VOLTAGE_SCALING_RANGE(VOLTAGE) (((VOLTAGE) == PWR_REGULATOR_VOLTAGE_SCALE1) || \
|
||||
((VOLTAGE) == PWR_REGULATOR_VOLTAGE_SCALE2))
|
||||
#else
|
||||
#define IS_PWR_VOLTAGE_SCALING_RANGE(VOLTAGE) (((VOLTAGE) == PWR_REGULATOR_VOLTAGE_SCALE1) || \
|
||||
((VOLTAGE) == PWR_REGULATOR_VOLTAGE_SCALE2) || \
|
||||
((VOLTAGE) == PWR_REGULATOR_VOLTAGE_SCALE3))
|
||||
#endif /* STM32F405xx || STM32F407xx || STM32F415xx || STM32F417xx */
|
||||
|
||||
#if defined(STM32F446xx)
|
||||
#define IS_PWR_WAKEUP_PIN(PIN) (((PIN) == PWR_WAKEUP_PIN1) || ((PIN) == PWR_WAKEUP_PIN2))
|
||||
#elif defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) || defined(STM32F412Zx) ||\
|
||||
defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) ||\
|
||||
defined(STM32F423xx)
|
||||
#define IS_PWR_WAKEUP_PIN(PIN) (((PIN) == PWR_WAKEUP_PIN1) || ((PIN) == PWR_WAKEUP_PIN2) || \
|
||||
((PIN) == PWR_WAKEUP_PIN3))
|
||||
#else
|
||||
#define IS_PWR_WAKEUP_PIN(PIN) ((PIN) == PWR_WAKEUP_PIN1)
|
||||
#endif /* STM32F446xx */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
|
||||
#endif /* __STM32F4xx_HAL_PWR_EX_H */
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file stm32f4xx_hal_pwr_ex.h
|
||||
* @author MCD Application Team
|
||||
* @brief Header file of PWR HAL Extension module.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* Copyright (c) 2017 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software is licensed under terms that can be found in the LICENSE file in
|
||||
* the root directory of this software component.
|
||||
* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef __STM32F4xx_HAL_PWR_EX_H
|
||||
#define __STM32F4xx_HAL_PWR_EX_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "stm32f4xx_hal_def.h"
|
||||
|
||||
/** @addtogroup STM32F4xx_HAL_Driver
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup PWREx
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* Exported types ------------------------------------------------------------*/
|
||||
/* Exported constants --------------------------------------------------------*/
|
||||
/** @defgroup PWREx_Exported_Constants PWREx Exported Constants
|
||||
* @{
|
||||
*/
|
||||
#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\
|
||||
defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx)
|
||||
|
||||
/** @defgroup PWREx_Regulator_state_in_UnderDrive_mode PWREx Regulator state in UnderDrive mode
|
||||
* @{
|
||||
*/
|
||||
#define PWR_MAINREGULATOR_UNDERDRIVE_ON PWR_CR_MRUDS
|
||||
#define PWR_LOWPOWERREGULATOR_UNDERDRIVE_ON ((uint32_t)(PWR_CR_LPDS | PWR_CR_LPUDS))
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup PWREx_Over_Under_Drive_Flag PWREx Over Under Drive Flag
|
||||
* @{
|
||||
*/
|
||||
#define PWR_FLAG_ODRDY PWR_CSR_ODRDY
|
||||
#define PWR_FLAG_ODSWRDY PWR_CSR_ODSWRDY
|
||||
#define PWR_FLAG_UDRDY PWR_CSR_UDSWRDY
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx || STM32F469xx || STM32F479xx */
|
||||
|
||||
/** @defgroup PWREx_Regulator_Voltage_Scale PWREx Regulator Voltage Scale
|
||||
* @{
|
||||
*/
|
||||
#if defined(STM32F405xx) || defined(STM32F407xx) || defined(STM32F415xx) || defined(STM32F417xx)
|
||||
#define PWR_REGULATOR_VOLTAGE_SCALE1 PWR_CR_VOS /* Scale 1 mode(default value at reset): the maximum value of fHCLK = 168 MHz. */
|
||||
#define PWR_REGULATOR_VOLTAGE_SCALE2 0x00000000U /* Scale 2 mode: the maximum value of fHCLK = 144 MHz. */
|
||||
#else
|
||||
#define PWR_REGULATOR_VOLTAGE_SCALE1 PWR_CR_VOS /* Scale 1 mode(default value at reset): the maximum value of fHCLK is 168 MHz. It can be extended to
|
||||
180 MHz by activating the over-drive mode. */
|
||||
#define PWR_REGULATOR_VOLTAGE_SCALE2 PWR_CR_VOS_1 /* Scale 2 mode: the maximum value of fHCLK is 144 MHz. It can be extended to
|
||||
168 MHz by activating the over-drive mode. */
|
||||
#define PWR_REGULATOR_VOLTAGE_SCALE3 PWR_CR_VOS_0 /* Scale 3 mode: the maximum value of fHCLK is 120 MHz. */
|
||||
#endif /* STM32F405xx || STM32F407xx || STM32F415xx || STM32F417xx */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) || defined(STM32F446xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || \
|
||||
defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx)
|
||||
/** @defgroup PWREx_WakeUp_Pins PWREx WakeUp Pins
|
||||
* @{
|
||||
*/
|
||||
#define PWR_WAKEUP_PIN2 0x00000080U
|
||||
#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) || defined(STM32F412Zx) || defined(STM32F412Vx) || \
|
||||
defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx)
|
||||
#define PWR_WAKEUP_PIN3 0x00000040U
|
||||
#endif /* STM32F410xx || STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Zx || STM32F412Vx || \
|
||||
STM32F412Rx || STM32F412Cx || STM32F413xx || STM32F423xx */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
#endif /* STM32F410xx || STM32F446xx || STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx ||
|
||||
STM32F413xx || STM32F423xx */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported macro ------------------------------------------------------------*/
|
||||
/** @defgroup PWREx_Exported_Constants PWREx Exported Constants
|
||||
* @{
|
||||
*/
|
||||
|
||||
#if defined(STM32F405xx) || defined(STM32F407xx) || defined(STM32F415xx) || defined(STM32F417xx)
|
||||
/** @brief macros configure the main internal regulator output voltage.
|
||||
* @param __REGULATOR__ specifies the regulator output voltage to achieve
|
||||
* a tradeoff between performance and power consumption when the device does
|
||||
* not operate at the maximum frequency (refer to the datasheets for more details).
|
||||
* This parameter can be one of the following values:
|
||||
* @arg PWR_REGULATOR_VOLTAGE_SCALE1: Regulator voltage output Scale 1 mode
|
||||
* @arg PWR_REGULATOR_VOLTAGE_SCALE2: Regulator voltage output Scale 2 mode
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_PWR_VOLTAGESCALING_CONFIG(__REGULATOR__) do { \
|
||||
__IO uint32_t tmpreg = 0x00U; \
|
||||
MODIFY_REG(PWR->CR, PWR_CR_VOS, (__REGULATOR__)); \
|
||||
/* Delay after an RCC peripheral clock enabling */ \
|
||||
tmpreg = READ_BIT(PWR->CR, PWR_CR_VOS); \
|
||||
UNUSED(tmpreg); \
|
||||
} while(0U)
|
||||
#else
|
||||
/** @brief macros configure the main internal regulator output voltage.
|
||||
* @param __REGULATOR__ specifies the regulator output voltage to achieve
|
||||
* a tradeoff between performance and power consumption when the device does
|
||||
* not operate at the maximum frequency (refer to the datasheets for more details).
|
||||
* This parameter can be one of the following values:
|
||||
* @arg PWR_REGULATOR_VOLTAGE_SCALE1: Regulator voltage output Scale 1 mode
|
||||
* @arg PWR_REGULATOR_VOLTAGE_SCALE2: Regulator voltage output Scale 2 mode
|
||||
* @arg PWR_REGULATOR_VOLTAGE_SCALE3: Regulator voltage output Scale 3 mode
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_PWR_VOLTAGESCALING_CONFIG(__REGULATOR__) do { \
|
||||
__IO uint32_t tmpreg = 0x00U; \
|
||||
MODIFY_REG(PWR->CR, PWR_CR_VOS, (__REGULATOR__)); \
|
||||
/* Delay after an RCC peripheral clock enabling */ \
|
||||
tmpreg = READ_BIT(PWR->CR, PWR_CR_VOS); \
|
||||
UNUSED(tmpreg); \
|
||||
} while(0U)
|
||||
#endif /* STM32F405xx || STM32F407xx || STM32F415xx || STM32F417xx */
|
||||
|
||||
#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\
|
||||
defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx)
|
||||
/** @brief Macros to enable or disable the Over drive mode.
|
||||
* @note These macros can be used only for STM32F42xx/STM3243xx devices.
|
||||
*/
|
||||
#define __HAL_PWR_OVERDRIVE_ENABLE() (*(__IO uint32_t *) CR_ODEN_BB = ENABLE)
|
||||
#define __HAL_PWR_OVERDRIVE_DISABLE() (*(__IO uint32_t *) CR_ODEN_BB = DISABLE)
|
||||
|
||||
/** @brief Macros to enable or disable the Over drive switching.
|
||||
* @note These macros can be used only for STM32F42xx/STM3243xx devices.
|
||||
*/
|
||||
#define __HAL_PWR_OVERDRIVESWITCHING_ENABLE() (*(__IO uint32_t *) CR_ODSWEN_BB = ENABLE)
|
||||
#define __HAL_PWR_OVERDRIVESWITCHING_DISABLE() (*(__IO uint32_t *) CR_ODSWEN_BB = DISABLE)
|
||||
|
||||
/** @brief Macros to enable or disable the Under drive mode.
|
||||
* @note This mode is enabled only with STOP low power mode.
|
||||
* In this mode, the 1.2V domain is preserved in reduced leakage mode. This
|
||||
* mode is only available when the main regulator or the low power regulator
|
||||
* is in low voltage mode.
|
||||
* @note If the Under-drive mode was enabled, it is automatically disabled after
|
||||
* exiting Stop mode.
|
||||
* When the voltage regulator operates in Under-drive mode, an additional
|
||||
* startup delay is induced when waking up from Stop mode.
|
||||
*/
|
||||
#define __HAL_PWR_UNDERDRIVE_ENABLE() (PWR->CR |= (uint32_t)PWR_CR_UDEN)
|
||||
#define __HAL_PWR_UNDERDRIVE_DISABLE() (PWR->CR &= (uint32_t)(~PWR_CR_UDEN))
|
||||
|
||||
/** @brief Check PWR flag is set or not.
|
||||
* @note These macros can be used only for STM32F42xx/STM3243xx devices.
|
||||
* @param __FLAG__ specifies the flag to check.
|
||||
* This parameter can be one of the following values:
|
||||
* @arg PWR_FLAG_ODRDY: This flag indicates that the Over-drive mode
|
||||
* is ready
|
||||
* @arg PWR_FLAG_ODSWRDY: This flag indicates that the Over-drive mode
|
||||
* switching is ready
|
||||
* @arg PWR_FLAG_UDRDY: This flag indicates that the Under-drive mode
|
||||
* is enabled in Stop mode
|
||||
* @retval The new state of __FLAG__ (TRUE or FALSE).
|
||||
*/
|
||||
#define __HAL_PWR_GET_ODRUDR_FLAG(__FLAG__) ((PWR->CSR & (__FLAG__)) == (__FLAG__))
|
||||
|
||||
/** @brief Clear the Under-Drive Ready flag.
|
||||
* @note These macros can be used only for STM32F42xx/STM3243xx devices.
|
||||
*/
|
||||
#define __HAL_PWR_CLEAR_ODRUDR_FLAG() (PWR->CSR |= PWR_FLAG_UDRDY)
|
||||
|
||||
#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx || STM32F469xx || STM32F479xx */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported functions --------------------------------------------------------*/
|
||||
/** @addtogroup PWREx_Exported_Functions PWREx Exported Functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup PWREx_Exported_Functions_Group1
|
||||
* @{
|
||||
*/
|
||||
void HAL_PWREx_EnableFlashPowerDown(void);
|
||||
void HAL_PWREx_DisableFlashPowerDown(void);
|
||||
HAL_StatusTypeDef HAL_PWREx_EnableBkUpReg(void);
|
||||
HAL_StatusTypeDef HAL_PWREx_DisableBkUpReg(void);
|
||||
uint32_t HAL_PWREx_GetVoltageRange(void);
|
||||
HAL_StatusTypeDef HAL_PWREx_ControlVoltageScaling(uint32_t VoltageScaling);
|
||||
|
||||
#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) || defined(STM32F401xC) ||\
|
||||
defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F412Zx) || defined(STM32F412Vx) ||\
|
||||
defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx)
|
||||
void HAL_PWREx_EnableMainRegulatorLowVoltage(void);
|
||||
void HAL_PWREx_DisableMainRegulatorLowVoltage(void);
|
||||
void HAL_PWREx_EnableLowRegulatorLowVoltage(void);
|
||||
void HAL_PWREx_DisableLowRegulatorLowVoltage(void);
|
||||
#endif /* STM32F410xx || STM32F401xC || STM32F401xE || STM32F411xE || STM32F412Zx || STM32F412Vx ||\
|
||||
STM32F412Rx || STM32F412Cx || STM32F413xx || STM32F423xx */
|
||||
|
||||
#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F446xx) ||\
|
||||
defined(STM32F469xx) || defined(STM32F479xx)
|
||||
HAL_StatusTypeDef HAL_PWREx_EnableOverDrive(void);
|
||||
HAL_StatusTypeDef HAL_PWREx_DisableOverDrive(void);
|
||||
HAL_StatusTypeDef HAL_PWREx_EnterUnderDriveSTOPMode(uint32_t Regulator, uint8_t STOPEntry);
|
||||
#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx || STM32F469xx || STM32F479xx */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
/* Private types -------------------------------------------------------------*/
|
||||
/* Private variables ---------------------------------------------------------*/
|
||||
/* Private constants ---------------------------------------------------------*/
|
||||
/** @defgroup PWREx_Private_Constants PWREx Private Constants
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup PWREx_register_alias_address PWREx Register alias address
|
||||
* @{
|
||||
*/
|
||||
/* ------------- PWR registers bit address in the alias region ---------------*/
|
||||
/* --- CR Register ---*/
|
||||
/* Alias word address of FPDS bit */
|
||||
#define FPDS_BIT_NUMBER PWR_CR_FPDS_Pos
|
||||
#define CR_FPDS_BB (uint32_t)(PERIPH_BB_BASE + (PWR_CR_OFFSET_BB * 32U) + (FPDS_BIT_NUMBER * 4U))
|
||||
|
||||
/* Alias word address of ODEN bit */
|
||||
#define ODEN_BIT_NUMBER PWR_CR_ODEN_Pos
|
||||
#define CR_ODEN_BB (uint32_t)(PERIPH_BB_BASE + (PWR_CR_OFFSET_BB * 32U) + (ODEN_BIT_NUMBER * 4U))
|
||||
|
||||
/* Alias word address of ODSWEN bit */
|
||||
#define ODSWEN_BIT_NUMBER PWR_CR_ODSWEN_Pos
|
||||
#define CR_ODSWEN_BB (uint32_t)(PERIPH_BB_BASE + (PWR_CR_OFFSET_BB * 32U) + (ODSWEN_BIT_NUMBER * 4U))
|
||||
|
||||
/* Alias word address of MRLVDS bit */
|
||||
#define MRLVDS_BIT_NUMBER PWR_CR_MRLVDS_Pos
|
||||
#define CR_MRLVDS_BB (uint32_t)(PERIPH_BB_BASE + (PWR_CR_OFFSET_BB * 32U) + (MRLVDS_BIT_NUMBER * 4U))
|
||||
|
||||
/* Alias word address of LPLVDS bit */
|
||||
#define LPLVDS_BIT_NUMBER PWR_CR_LPLVDS_Pos
|
||||
#define CR_LPLVDS_BB (uint32_t)(PERIPH_BB_BASE + (PWR_CR_OFFSET_BB * 32U) + (LPLVDS_BIT_NUMBER * 4U))
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup PWREx_CSR_register_alias PWRx CSR Register alias address
|
||||
* @{
|
||||
*/
|
||||
/* --- CSR Register ---*/
|
||||
/* Alias word address of BRE bit */
|
||||
#define BRE_BIT_NUMBER PWR_CSR_BRE_Pos
|
||||
#define CSR_BRE_BB (uint32_t)(PERIPH_BB_BASE + (PWR_CSR_OFFSET_BB * 32U) + (BRE_BIT_NUMBER * 4U))
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Private macros ------------------------------------------------------------*/
|
||||
/** @defgroup PWREx_Private_Macros PWREx Private Macros
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup PWREx_IS_PWR_Definitions PWREx Private macros to check input parameters
|
||||
* @{
|
||||
*/
|
||||
#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\
|
||||
defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx)
|
||||
#define IS_PWR_REGULATOR_UNDERDRIVE(REGULATOR) (((REGULATOR) == PWR_MAINREGULATOR_UNDERDRIVE_ON) || \
|
||||
((REGULATOR) == PWR_LOWPOWERREGULATOR_UNDERDRIVE_ON))
|
||||
#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx || STM32F469xx || STM32F479xx */
|
||||
|
||||
#if defined(STM32F405xx) || defined(STM32F407xx) || defined(STM32F415xx) || defined(STM32F417xx)
|
||||
#define IS_PWR_VOLTAGE_SCALING_RANGE(VOLTAGE) (((VOLTAGE) == PWR_REGULATOR_VOLTAGE_SCALE1) || \
|
||||
((VOLTAGE) == PWR_REGULATOR_VOLTAGE_SCALE2))
|
||||
#else
|
||||
#define IS_PWR_VOLTAGE_SCALING_RANGE(VOLTAGE) (((VOLTAGE) == PWR_REGULATOR_VOLTAGE_SCALE1) || \
|
||||
((VOLTAGE) == PWR_REGULATOR_VOLTAGE_SCALE2) || \
|
||||
((VOLTAGE) == PWR_REGULATOR_VOLTAGE_SCALE3))
|
||||
#endif /* STM32F405xx || STM32F407xx || STM32F415xx || STM32F417xx */
|
||||
|
||||
#if defined(STM32F446xx)
|
||||
#define IS_PWR_WAKEUP_PIN(PIN) (((PIN) == PWR_WAKEUP_PIN1) || ((PIN) == PWR_WAKEUP_PIN2))
|
||||
#elif defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) || defined(STM32F412Zx) ||\
|
||||
defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) ||\
|
||||
defined(STM32F423xx)
|
||||
#define IS_PWR_WAKEUP_PIN(PIN) (((PIN) == PWR_WAKEUP_PIN1) || ((PIN) == PWR_WAKEUP_PIN2) || \
|
||||
((PIN) == PWR_WAKEUP_PIN3))
|
||||
#else
|
||||
#define IS_PWR_WAKEUP_PIN(PIN) ((PIN) == PWR_WAKEUP_PIN1)
|
||||
#endif /* STM32F446xx */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
|
||||
#endif /* __STM32F4xx_HAL_PWR_EX_H */
|
||||
|
|
|
|||
File diff suppressed because it is too large
Load diff
File diff suppressed because it is too large
Load diff
File diff suppressed because it is too large
Load diff
|
|
@ -1,351 +0,0 @@
|
|||
/**
|
||||
******************************************************************************
|
||||
* @file stm32f4xx_hal_tim_ex.h
|
||||
* @author MCD Application Team
|
||||
* @brief Header file of TIM HAL Extended module.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* <h2><center>© Copyright (c) 2016 STMicroelectronics.
|
||||
* All rights reserved.</center></h2>
|
||||
*
|
||||
* This software component is licensed by ST under BSD 3-Clause license,
|
||||
* the "License"; You may not use this file except in compliance with the
|
||||
* License. You may obtain a copy of the License at:
|
||||
* opensource.org/licenses/BSD-3-Clause
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef STM32F4xx_HAL_TIM_EX_H
|
||||
#define STM32F4xx_HAL_TIM_EX_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "stm32f4xx_hal_def.h"
|
||||
|
||||
/** @addtogroup STM32F4xx_HAL_Driver
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup TIMEx
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* Exported types ------------------------------------------------------------*/
|
||||
/** @defgroup TIMEx_Exported_Types TIM Extended Exported Types
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief TIM Hall sensor Configuration Structure definition
|
||||
*/
|
||||
|
||||
typedef struct
|
||||
{
|
||||
uint32_t IC1Polarity; /*!< Specifies the active edge of the input signal.
|
||||
This parameter can be a value of @ref TIM_Input_Capture_Polarity */
|
||||
|
||||
uint32_t IC1Prescaler; /*!< Specifies the Input Capture Prescaler.
|
||||
This parameter can be a value of @ref TIM_Input_Capture_Prescaler */
|
||||
|
||||
uint32_t IC1Filter; /*!< Specifies the input capture filter.
|
||||
This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */
|
||||
|
||||
uint32_t Commutation_Delay; /*!< Specifies the pulse value to be loaded into the Capture Compare Register.
|
||||
This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF */
|
||||
} TIM_HallSensor_InitTypeDef;
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
/* End of exported types -----------------------------------------------------*/
|
||||
|
||||
/* Exported constants --------------------------------------------------------*/
|
||||
/** @defgroup TIMEx_Exported_Constants TIM Extended Exported Constants
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup TIMEx_Remap TIM Extended Remapping
|
||||
* @{
|
||||
*/
|
||||
#if defined (TIM2)
|
||||
#if defined(TIM8)
|
||||
#define TIM_TIM2_TIM8_TRGO 0x00000000U /*!< TIM2 ITR1 is connected to TIM8 TRGO */
|
||||
#else
|
||||
#define TIM_TIM2_ETH_PTP TIM_OR_ITR1_RMP_0 /*!< TIM2 ITR1 is connected to PTP trigger output */
|
||||
#endif /* TIM8 */
|
||||
#define TIM_TIM2_USBFS_SOF TIM_OR_ITR1_RMP_1 /*!< TIM2 ITR1 is connected to OTG FS SOF */
|
||||
#define TIM_TIM2_USBHS_SOF (TIM_OR_ITR1_RMP_1 | TIM_OR_ITR1_RMP_0) /*!< TIM2 ITR1 is connected to OTG HS SOF */
|
||||
#endif /* TIM2 */
|
||||
|
||||
#define TIM_TIM5_GPIO 0x00000000U /*!< TIM5 TI4 is connected to GPIO */
|
||||
#define TIM_TIM5_LSI TIM_OR_TI4_RMP_0 /*!< TIM5 TI4 is connected to LSI */
|
||||
#define TIM_TIM5_LSE TIM_OR_TI4_RMP_1 /*!< TIM5 TI4 is connected to LSE */
|
||||
#define TIM_TIM5_RTC (TIM_OR_TI4_RMP_1 | TIM_OR_TI4_RMP_0) /*!< TIM5 TI4 is connected to the RTC wakeup interrupt */
|
||||
|
||||
#define TIM_TIM11_GPIO 0x00000000U /*!< TIM11 TI1 is connected to GPIO */
|
||||
#define TIM_TIM11_HSE TIM_OR_TI1_RMP_1 /*!< TIM11 TI1 is connected to HSE_RTC clock */
|
||||
#if defined(SPDIFRX)
|
||||
#define TIM_TIM11_SPDIFRX TIM_OR_TI1_RMP_0 /*!< TIM11 TI1 is connected to SPDIFRX_FRAME_SYNC */
|
||||
#endif /* SPDIFRX*/
|
||||
|
||||
#if defined(LPTIM_OR_TIM1_ITR2_RMP) && defined(LPTIM_OR_TIM5_ITR1_RMP) && defined(LPTIM_OR_TIM5_ITR1_RMP)
|
||||
#define LPTIM_REMAP_MASK 0x10000000U
|
||||
|
||||
#define TIM_TIM9_TIM3_TRGO LPTIM_REMAP_MASK /*!< TIM9 ITR1 is connected to TIM3 TRGO */
|
||||
#define TIM_TIM9_LPTIM (LPTIM_REMAP_MASK | LPTIM_OR_TIM9_ITR1_RMP) /*!< TIM9 ITR1 is connected to LPTIM1 output */
|
||||
|
||||
#define TIM_TIM5_TIM3_TRGO LPTIM_REMAP_MASK /*!< TIM5 ITR1 is connected to TIM3 TRGO */
|
||||
#define TIM_TIM5_LPTIM (LPTIM_REMAP_MASK | LPTIM_OR_TIM5_ITR1_RMP) /*!< TIM5 ITR1 is connected to LPTIM1 output */
|
||||
|
||||
#define TIM_TIM1_TIM3_TRGO LPTIM_REMAP_MASK /*!< TIM1 ITR2 is connected to TIM3 TRGO */
|
||||
#define TIM_TIM1_LPTIM (LPTIM_REMAP_MASK | LPTIM_OR_TIM1_ITR2_RMP) /*!< TIM1 ITR2 is connected to LPTIM1 output */
|
||||
#endif /* LPTIM_OR_TIM1_ITR2_RMP && LPTIM_OR_TIM5_ITR1_RMP && LPTIM_OR_TIM5_ITR1_RMP */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
/* End of exported constants -------------------------------------------------*/
|
||||
|
||||
/* Exported macro ------------------------------------------------------------*/
|
||||
/** @defgroup TIMEx_Exported_Macros TIM Extended Exported Macros
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
/* End of exported macro -----------------------------------------------------*/
|
||||
|
||||
/* Private macro -------------------------------------------------------------*/
|
||||
/** @defgroup TIMEx_Private_Macros TIM Extended Private Macros
|
||||
* @{
|
||||
*/
|
||||
#if defined(SPDIFRX)
|
||||
#define IS_TIM_REMAP(INSTANCE, TIM_REMAP) \
|
||||
((((INSTANCE) == TIM2) && (((TIM_REMAP) == TIM_TIM2_TIM8_TRGO) || \
|
||||
((TIM_REMAP) == TIM_TIM2_USBFS_SOF) || \
|
||||
((TIM_REMAP) == TIM_TIM2_USBHS_SOF))) || \
|
||||
(((INSTANCE) == TIM5) && (((TIM_REMAP) == TIM_TIM5_GPIO) || \
|
||||
((TIM_REMAP) == TIM_TIM5_LSI) || \
|
||||
((TIM_REMAP) == TIM_TIM5_LSE) || \
|
||||
((TIM_REMAP) == TIM_TIM5_RTC))) || \
|
||||
(((INSTANCE) == TIM11) && (((TIM_REMAP) == TIM_TIM11_GPIO) || \
|
||||
((TIM_REMAP) == TIM_TIM11_SPDIFRX) || \
|
||||
((TIM_REMAP) == TIM_TIM11_HSE))))
|
||||
#elif defined(TIM2)
|
||||
#if defined(LPTIM_OR_TIM1_ITR2_RMP) && defined(LPTIM_OR_TIM5_ITR1_RMP) && defined(LPTIM_OR_TIM5_ITR1_RMP)
|
||||
#define IS_TIM_REMAP(INSTANCE, TIM_REMAP) \
|
||||
((((INSTANCE) == TIM2) && (((TIM_REMAP) == TIM_TIM2_TIM8_TRGO) || \
|
||||
((TIM_REMAP) == TIM_TIM2_USBFS_SOF) || \
|
||||
((TIM_REMAP) == TIM_TIM2_USBHS_SOF))) || \
|
||||
(((INSTANCE) == TIM5) && (((TIM_REMAP) == TIM_TIM5_GPIO) || \
|
||||
((TIM_REMAP) == TIM_TIM5_LSI) || \
|
||||
((TIM_REMAP) == TIM_TIM5_LSE) || \
|
||||
((TIM_REMAP) == TIM_TIM5_RTC))) || \
|
||||
(((INSTANCE) == TIM11) && (((TIM_REMAP) == TIM_TIM11_GPIO) || \
|
||||
((TIM_REMAP) == TIM_TIM11_HSE))) || \
|
||||
(((INSTANCE) == TIM1) && (((TIM_REMAP) == TIM_TIM1_TIM3_TRGO) || \
|
||||
((TIM_REMAP) == TIM_TIM1_LPTIM))) || \
|
||||
(((INSTANCE) == TIM5) && (((TIM_REMAP) == TIM_TIM5_TIM3_TRGO) || \
|
||||
((TIM_REMAP) == TIM_TIM5_LPTIM))) || \
|
||||
(((INSTANCE) == TIM9) && (((TIM_REMAP) == TIM_TIM9_TIM3_TRGO) || \
|
||||
((TIM_REMAP) == TIM_TIM9_LPTIM))))
|
||||
#elif defined(TIM8)
|
||||
#define IS_TIM_REMAP(INSTANCE, TIM_REMAP) \
|
||||
((((INSTANCE) == TIM2) && (((TIM_REMAP) == TIM_TIM2_TIM8_TRGO) || \
|
||||
((TIM_REMAP) == TIM_TIM2_USBFS_SOF) || \
|
||||
((TIM_REMAP) == TIM_TIM2_USBHS_SOF))) || \
|
||||
(((INSTANCE) == TIM5) && (((TIM_REMAP) == TIM_TIM5_GPIO) || \
|
||||
((TIM_REMAP) == TIM_TIM5_LSI) || \
|
||||
((TIM_REMAP) == TIM_TIM5_LSE) || \
|
||||
((TIM_REMAP) == TIM_TIM5_RTC))) || \
|
||||
(((INSTANCE) == TIM11) && (((TIM_REMAP) == TIM_TIM11_GPIO) || \
|
||||
((TIM_REMAP) == TIM_TIM11_HSE))))
|
||||
#else
|
||||
#define IS_TIM_REMAP(INSTANCE, TIM_REMAP) \
|
||||
((((INSTANCE) == TIM2) && (((TIM_REMAP) == TIM_TIM2_ETH_PTP) || \
|
||||
((TIM_REMAP) == TIM_TIM2_USBFS_SOF) || \
|
||||
((TIM_REMAP) == TIM_TIM2_USBHS_SOF))) || \
|
||||
(((INSTANCE) == TIM5) && (((TIM_REMAP) == TIM_TIM5_GPIO) || \
|
||||
((TIM_REMAP) == TIM_TIM5_LSI) || \
|
||||
((TIM_REMAP) == TIM_TIM5_LSE) || \
|
||||
((TIM_REMAP) == TIM_TIM5_RTC))) || \
|
||||
(((INSTANCE) == TIM11) && (((TIM_REMAP) == TIM_TIM11_GPIO) || \
|
||||
((TIM_REMAP) == TIM_TIM11_HSE))))
|
||||
#endif /* LPTIM_OR_TIM1_ITR2_RMP && LPTIM_OR_TIM5_ITR1_RMP && LPTIM_OR_TIM5_ITR1_RMP */
|
||||
#else
|
||||
#define IS_TIM_REMAP(INSTANCE, TIM_REMAP) \
|
||||
((((INSTANCE) == TIM5) && (((TIM_REMAP) == TIM_TIM5_GPIO) || \
|
||||
((TIM_REMAP) == TIM_TIM5_LSI) || \
|
||||
((TIM_REMAP) == TIM_TIM5_LSE) || \
|
||||
((TIM_REMAP) == TIM_TIM5_RTC))) || \
|
||||
(((INSTANCE) == TIM11) && (((TIM_REMAP) == TIM_TIM11_GPIO) || \
|
||||
((TIM_REMAP) == TIM_TIM11_HSE))))
|
||||
#endif /* SPDIFRX */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
/* End of private macro ------------------------------------------------------*/
|
||||
|
||||
/* Exported functions --------------------------------------------------------*/
|
||||
/** @addtogroup TIMEx_Exported_Functions TIM Extended Exported Functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup TIMEx_Exported_Functions_Group1 Extended Timer Hall Sensor functions
|
||||
* @brief Timer Hall Sensor functions
|
||||
* @{
|
||||
*/
|
||||
/* Timer Hall Sensor functions **********************************************/
|
||||
HAL_StatusTypeDef HAL_TIMEx_HallSensor_Init(TIM_HandleTypeDef *htim, TIM_HallSensor_InitTypeDef *sConfig);
|
||||
HAL_StatusTypeDef HAL_TIMEx_HallSensor_DeInit(TIM_HandleTypeDef *htim);
|
||||
|
||||
void HAL_TIMEx_HallSensor_MspInit(TIM_HandleTypeDef *htim);
|
||||
void HAL_TIMEx_HallSensor_MspDeInit(TIM_HandleTypeDef *htim);
|
||||
|
||||
/* Blocking mode: Polling */
|
||||
HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start(TIM_HandleTypeDef *htim);
|
||||
HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop(TIM_HandleTypeDef *htim);
|
||||
/* Non-Blocking mode: Interrupt */
|
||||
HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start_IT(TIM_HandleTypeDef *htim);
|
||||
HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop_IT(TIM_HandleTypeDef *htim);
|
||||
/* Non-Blocking mode: DMA */
|
||||
HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start_DMA(TIM_HandleTypeDef *htim, uint32_t *pData, uint16_t Length);
|
||||
HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop_DMA(TIM_HandleTypeDef *htim);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup TIMEx_Exported_Functions_Group2 Extended Timer Complementary Output Compare functions
|
||||
* @brief Timer Complementary Output Compare functions
|
||||
* @{
|
||||
*/
|
||||
/* Timer Complementary Output Compare functions *****************************/
|
||||
/* Blocking mode: Polling */
|
||||
HAL_StatusTypeDef HAL_TIMEx_OCN_Start(TIM_HandleTypeDef *htim, uint32_t Channel);
|
||||
HAL_StatusTypeDef HAL_TIMEx_OCN_Stop(TIM_HandleTypeDef *htim, uint32_t Channel);
|
||||
|
||||
/* Non-Blocking mode: Interrupt */
|
||||
HAL_StatusTypeDef HAL_TIMEx_OCN_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
|
||||
HAL_StatusTypeDef HAL_TIMEx_OCN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
|
||||
|
||||
/* Non-Blocking mode: DMA */
|
||||
HAL_StatusTypeDef HAL_TIMEx_OCN_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length);
|
||||
HAL_StatusTypeDef HAL_TIMEx_OCN_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup TIMEx_Exported_Functions_Group3 Extended Timer Complementary PWM functions
|
||||
* @brief Timer Complementary PWM functions
|
||||
* @{
|
||||
*/
|
||||
/* Timer Complementary PWM functions ****************************************/
|
||||
/* Blocking mode: Polling */
|
||||
HAL_StatusTypeDef HAL_TIMEx_PWMN_Start(TIM_HandleTypeDef *htim, uint32_t Channel);
|
||||
HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop(TIM_HandleTypeDef *htim, uint32_t Channel);
|
||||
|
||||
/* Non-Blocking mode: Interrupt */
|
||||
HAL_StatusTypeDef HAL_TIMEx_PWMN_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
|
||||
HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
|
||||
/* Non-Blocking mode: DMA */
|
||||
HAL_StatusTypeDef HAL_TIMEx_PWMN_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length);
|
||||
HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup TIMEx_Exported_Functions_Group4 Extended Timer Complementary One Pulse functions
|
||||
* @brief Timer Complementary One Pulse functions
|
||||
* @{
|
||||
*/
|
||||
/* Timer Complementary One Pulse functions **********************************/
|
||||
/* Blocking mode: Polling */
|
||||
HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Start(TIM_HandleTypeDef *htim, uint32_t OutputChannel);
|
||||
HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Stop(TIM_HandleTypeDef *htim, uint32_t OutputChannel);
|
||||
|
||||
/* Non-Blocking mode: Interrupt */
|
||||
HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Start_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel);
|
||||
HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup TIMEx_Exported_Functions_Group5 Extended Peripheral Control functions
|
||||
* @brief Peripheral Control functions
|
||||
* @{
|
||||
*/
|
||||
/* Extended Control functions ************************************************/
|
||||
HAL_StatusTypeDef HAL_TIMEx_ConfigCommutEvent(TIM_HandleTypeDef *htim, uint32_t InputTrigger, uint32_t CommutationSource);
|
||||
HAL_StatusTypeDef HAL_TIMEx_ConfigCommutEvent_IT(TIM_HandleTypeDef *htim, uint32_t InputTrigger, uint32_t CommutationSource);
|
||||
HAL_StatusTypeDef HAL_TIMEx_ConfigCommutEvent_DMA(TIM_HandleTypeDef *htim, uint32_t InputTrigger, uint32_t CommutationSource);
|
||||
HAL_StatusTypeDef HAL_TIMEx_MasterConfigSynchronization(TIM_HandleTypeDef *htim, TIM_MasterConfigTypeDef *sMasterConfig);
|
||||
HAL_StatusTypeDef HAL_TIMEx_ConfigBreakDeadTime(TIM_HandleTypeDef *htim, TIM_BreakDeadTimeConfigTypeDef *sBreakDeadTimeConfig);
|
||||
HAL_StatusTypeDef HAL_TIMEx_RemapConfig(TIM_HandleTypeDef *htim, uint32_t Remap);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup TIMEx_Exported_Functions_Group6 Extended Callbacks functions
|
||||
* @brief Extended Callbacks functions
|
||||
* @{
|
||||
*/
|
||||
/* Extended Callback **********************************************************/
|
||||
void HAL_TIMEx_CommutCallback(TIM_HandleTypeDef *htim);
|
||||
void HAL_TIMEx_CommutHalfCpltCallback(TIM_HandleTypeDef *htim);
|
||||
void HAL_TIMEx_BreakCallback(TIM_HandleTypeDef *htim);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup TIMEx_Exported_Functions_Group7 Extended Peripheral State functions
|
||||
* @brief Extended Peripheral State functions
|
||||
* @{
|
||||
*/
|
||||
/* Extended Peripheral State functions ***************************************/
|
||||
HAL_TIM_StateTypeDef HAL_TIMEx_HallSensor_GetState(TIM_HandleTypeDef *htim);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
/* End of exported functions -------------------------------------------------*/
|
||||
|
||||
/* Private functions----------------------------------------------------------*/
|
||||
/** @defgroup TIMEx_Private_Functions TIM Extended Private Functions
|
||||
* @{
|
||||
*/
|
||||
void TIMEx_DMACommutationCplt(DMA_HandleTypeDef *hdma);
|
||||
void TIMEx_DMACommutationHalfCplt(DMA_HandleTypeDef *hdma);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
/* End of private functions --------------------------------------------------*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
|
||||
#endif /* STM32F4xx_HAL_TIM_EX_H */
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
File diff suppressed because it is too large
Load diff
File diff suppressed because it is too large
Load diff
|
|
@ -1,204 +1,201 @@
|
|||
/**
|
||||
******************************************************************************
|
||||
* @file stm32f4xx_ll_crc.h
|
||||
* @author MCD Application Team
|
||||
* @brief Header file of CRC LL module.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* <h2><center>© Copyright (c) 2016 STMicroelectronics.
|
||||
* All rights reserved.</center></h2>
|
||||
*
|
||||
* This software component is licensed by ST under BSD 3-Clause license,
|
||||
* the "License"; You may not use this file except in compliance with the
|
||||
* License. You may obtain a copy of the License at:
|
||||
* opensource.org/licenses/BSD-3-Clause
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef STM32F4xx_LL_CRC_H
|
||||
#define STM32F4xx_LL_CRC_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "stm32f4xx.h"
|
||||
|
||||
/** @addtogroup STM32F4xx_LL_Driver
|
||||
* @{
|
||||
*/
|
||||
|
||||
#if defined(CRC)
|
||||
|
||||
/** @defgroup CRC_LL CRC
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* Private types -------------------------------------------------------------*/
|
||||
/* Private variables ---------------------------------------------------------*/
|
||||
/* Private constants ---------------------------------------------------------*/
|
||||
/* Private macros ------------------------------------------------------------*/
|
||||
|
||||
/* Exported types ------------------------------------------------------------*/
|
||||
/* Exported constants --------------------------------------------------------*/
|
||||
/** @defgroup CRC_LL_Exported_Constants CRC Exported Constants
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported macro ------------------------------------------------------------*/
|
||||
/** @defgroup CRC_LL_Exported_Macros CRC Exported Macros
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup CRC_LL_EM_WRITE_READ Common Write and read registers Macros
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief Write a value in CRC register
|
||||
* @param __INSTANCE__ CRC Instance
|
||||
* @param __REG__ Register to be written
|
||||
* @param __VALUE__ Value to be written in the register
|
||||
* @retval None
|
||||
*/
|
||||
#define LL_CRC_WriteReg(__INSTANCE__, __REG__, __VALUE__) WRITE_REG(__INSTANCE__->__REG__, __VALUE__)
|
||||
|
||||
/**
|
||||
* @brief Read a value in CRC register
|
||||
* @param __INSTANCE__ CRC Instance
|
||||
* @param __REG__ Register to be read
|
||||
* @retval Register value
|
||||
*/
|
||||
#define LL_CRC_ReadReg(__INSTANCE__, __REG__) READ_REG(__INSTANCE__->__REG__)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
|
||||
/* Exported functions --------------------------------------------------------*/
|
||||
/** @defgroup CRC_LL_Exported_Functions CRC Exported Functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup CRC_LL_EF_Configuration CRC Configuration functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief Reset the CRC calculation unit.
|
||||
* @note If Programmable Initial CRC value feature
|
||||
* is available, also set the Data Register to the value stored in the
|
||||
* CRC_INIT register, otherwise, reset Data Register to its default value.
|
||||
* @rmtoll CR RESET LL_CRC_ResetCRCCalculationUnit
|
||||
* @param CRCx CRC Instance
|
||||
* @retval None
|
||||
*/
|
||||
__STATIC_INLINE void LL_CRC_ResetCRCCalculationUnit(CRC_TypeDef *CRCx)
|
||||
{
|
||||
SET_BIT(CRCx->CR, CRC_CR_RESET);
|
||||
}
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup CRC_LL_EF_Data_Management Data_Management
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief Write given 32-bit data to the CRC calculator
|
||||
* @rmtoll DR DR LL_CRC_FeedData32
|
||||
* @param CRCx CRC Instance
|
||||
* @param InData value to be provided to CRC calculator between between Min_Data=0 and Max_Data=0xFFFFFFFF
|
||||
* @retval None
|
||||
*/
|
||||
__STATIC_INLINE void LL_CRC_FeedData32(CRC_TypeDef *CRCx, uint32_t InData)
|
||||
{
|
||||
WRITE_REG(CRCx->DR, InData);
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Return current CRC calculation result. 32 bits value is returned.
|
||||
* @rmtoll DR DR LL_CRC_ReadData32
|
||||
* @param CRCx CRC Instance
|
||||
* @retval Current CRC calculation result as stored in CRC_DR register (32 bits).
|
||||
*/
|
||||
__STATIC_INLINE uint32_t LL_CRC_ReadData32(CRC_TypeDef *CRCx)
|
||||
{
|
||||
return (uint32_t)(READ_REG(CRCx->DR));
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Return data stored in the Independent Data(IDR) register.
|
||||
* @note This register can be used as a temporary storage location for one byte.
|
||||
* @rmtoll IDR IDR LL_CRC_Read_IDR
|
||||
* @param CRCx CRC Instance
|
||||
* @retval Value stored in CRC_IDR register (General-purpose 8-bit data register).
|
||||
*/
|
||||
__STATIC_INLINE uint32_t LL_CRC_Read_IDR(CRC_TypeDef *CRCx)
|
||||
{
|
||||
return (uint32_t)(READ_REG(CRCx->IDR));
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Store data in the Independent Data(IDR) register.
|
||||
* @note This register can be used as a temporary storage location for one byte.
|
||||
* @rmtoll IDR IDR LL_CRC_Write_IDR
|
||||
* @param CRCx CRC Instance
|
||||
* @param InData value to be stored in CRC_IDR register (8-bit) between Min_Data=0 and Max_Data=0xFF
|
||||
* @retval None
|
||||
*/
|
||||
__STATIC_INLINE void LL_CRC_Write_IDR(CRC_TypeDef *CRCx, uint32_t InData)
|
||||
{
|
||||
*((uint8_t __IO *)(&CRCx->IDR)) = (uint8_t) InData;
|
||||
}
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#if defined(USE_FULL_LL_DRIVER)
|
||||
/** @defgroup CRC_LL_EF_Init Initialization and de-initialization functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
ErrorStatus LL_CRC_DeInit(CRC_TypeDef *CRCx);
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
#endif /* USE_FULL_LL_DRIVER */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#endif /* defined(CRC) */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* STM32F4xx_LL_CRC_H */
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file stm32f4xx_ll_crc.h
|
||||
* @author MCD Application Team
|
||||
* @brief Header file of CRC LL module.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* Copyright (c) 2016 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software is licensed under terms that can be found in the LICENSE file
|
||||
* in the root directory of this software component.
|
||||
* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef STM32F4xx_LL_CRC_H
|
||||
#define STM32F4xx_LL_CRC_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "stm32f4xx.h"
|
||||
|
||||
/** @addtogroup STM32F4xx_LL_Driver
|
||||
* @{
|
||||
*/
|
||||
|
||||
#if defined(CRC)
|
||||
|
||||
/** @defgroup CRC_LL CRC
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* Private types -------------------------------------------------------------*/
|
||||
/* Private variables ---------------------------------------------------------*/
|
||||
/* Private constants ---------------------------------------------------------*/
|
||||
/* Private macros ------------------------------------------------------------*/
|
||||
|
||||
/* Exported types ------------------------------------------------------------*/
|
||||
/* Exported constants --------------------------------------------------------*/
|
||||
/** @defgroup CRC_LL_Exported_Constants CRC Exported Constants
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported macro ------------------------------------------------------------*/
|
||||
/** @defgroup CRC_LL_Exported_Macros CRC Exported Macros
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup CRC_LL_EM_WRITE_READ Common Write and read registers Macros
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief Write a value in CRC register
|
||||
* @param __INSTANCE__ CRC Instance
|
||||
* @param __REG__ Register to be written
|
||||
* @param __VALUE__ Value to be written in the register
|
||||
* @retval None
|
||||
*/
|
||||
#define LL_CRC_WriteReg(__INSTANCE__, __REG__, __VALUE__) WRITE_REG(__INSTANCE__->__REG__, __VALUE__)
|
||||
|
||||
/**
|
||||
* @brief Read a value in CRC register
|
||||
* @param __INSTANCE__ CRC Instance
|
||||
* @param __REG__ Register to be read
|
||||
* @retval Register value
|
||||
*/
|
||||
#define LL_CRC_ReadReg(__INSTANCE__, __REG__) READ_REG(__INSTANCE__->__REG__)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
|
||||
/* Exported functions --------------------------------------------------------*/
|
||||
/** @defgroup CRC_LL_Exported_Functions CRC Exported Functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup CRC_LL_EF_Configuration CRC Configuration functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief Reset the CRC calculation unit.
|
||||
* @note If Programmable Initial CRC value feature
|
||||
* is available, also set the Data Register to the value stored in the
|
||||
* CRC_INIT register, otherwise, reset Data Register to its default value.
|
||||
* @rmtoll CR RESET LL_CRC_ResetCRCCalculationUnit
|
||||
* @param CRCx CRC Instance
|
||||
* @retval None
|
||||
*/
|
||||
__STATIC_INLINE void LL_CRC_ResetCRCCalculationUnit(CRC_TypeDef *CRCx)
|
||||
{
|
||||
SET_BIT(CRCx->CR, CRC_CR_RESET);
|
||||
}
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup CRC_LL_EF_Data_Management Data_Management
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief Write given 32-bit data to the CRC calculator
|
||||
* @rmtoll DR DR LL_CRC_FeedData32
|
||||
* @param CRCx CRC Instance
|
||||
* @param InData value to be provided to CRC calculator between between Min_Data=0 and Max_Data=0xFFFFFFFF
|
||||
* @retval None
|
||||
*/
|
||||
__STATIC_INLINE void LL_CRC_FeedData32(CRC_TypeDef *CRCx, uint32_t InData)
|
||||
{
|
||||
WRITE_REG(CRCx->DR, InData);
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Return current CRC calculation result. 32 bits value is returned.
|
||||
* @rmtoll DR DR LL_CRC_ReadData32
|
||||
* @param CRCx CRC Instance
|
||||
* @retval Current CRC calculation result as stored in CRC_DR register (32 bits).
|
||||
*/
|
||||
__STATIC_INLINE uint32_t LL_CRC_ReadData32(const CRC_TypeDef *CRCx)
|
||||
{
|
||||
return (uint32_t)(READ_REG(CRCx->DR));
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Return data stored in the Independent Data(IDR) register.
|
||||
* @note This register can be used as a temporary storage location for one byte.
|
||||
* @rmtoll IDR IDR LL_CRC_Read_IDR
|
||||
* @param CRCx CRC Instance
|
||||
* @retval Value stored in CRC_IDR register (General-purpose 8-bit data register).
|
||||
*/
|
||||
__STATIC_INLINE uint32_t LL_CRC_Read_IDR(CRC_TypeDef *CRCx)
|
||||
{
|
||||
return (uint32_t)(READ_REG(CRCx->IDR));
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Store data in the Independent Data(IDR) register.
|
||||
* @note This register can be used as a temporary storage location for one byte.
|
||||
* @rmtoll IDR IDR LL_CRC_Write_IDR
|
||||
* @param CRCx CRC Instance
|
||||
* @param InData value to be stored in CRC_IDR register (8-bit) between Min_Data=0 and Max_Data=0xFF
|
||||
* @retval None
|
||||
*/
|
||||
__STATIC_INLINE void LL_CRC_Write_IDR(CRC_TypeDef *CRCx, uint32_t InData)
|
||||
{
|
||||
*((uint8_t __IO *)(&CRCx->IDR)) = (uint8_t) InData;
|
||||
}
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#if defined(USE_FULL_LL_DRIVER)
|
||||
/** @defgroup CRC_LL_EF_Init Initialization and de-initialization functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
ErrorStatus LL_CRC_DeInit(const CRC_TypeDef *CRCx);
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
#endif /* USE_FULL_LL_DRIVER */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#endif /* defined(CRC) */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* STM32F4xx_LL_CRC_H */
|
||||
|
|
|
|||
File diff suppressed because it is too large
Load diff
File diff suppressed because it is too large
Load diff
File diff suppressed because it is too large
Load diff
File diff suppressed because it is too large
Load diff
File diff suppressed because it is too large
Load diff
File diff suppressed because it is too large
Load diff
File diff suppressed because it is too large
Load diff
|
|
@ -1,309 +1,307 @@
|
|||
/**
|
||||
******************************************************************************
|
||||
* @file stm32f4xx_ll_utils.h
|
||||
* @author MCD Application Team
|
||||
* @brief Header file of UTILS LL module.
|
||||
@verbatim
|
||||
==============================================================================
|
||||
##### How to use this driver #####
|
||||
==============================================================================
|
||||
[..]
|
||||
The LL UTILS driver contains a set of generic APIs that can be
|
||||
used by user:
|
||||
(+) Device electronic signature
|
||||
(+) Timing functions
|
||||
(+) PLL configuration functions
|
||||
|
||||
@endverbatim
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* <h2><center>© Copyright (c) 2017 STMicroelectronics.
|
||||
* All rights reserved.</center></h2>
|
||||
*
|
||||
* This software component is licensed by ST under BSD 3-Clause license,
|
||||
* the "License"; You may not use this file except in compliance with the
|
||||
* License. You may obtain a copy of the License at:
|
||||
* opensource.org/licenses/BSD-3-Clause
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef __STM32F4xx_LL_UTILS_H
|
||||
#define __STM32F4xx_LL_UTILS_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "stm32f4xx.h"
|
||||
|
||||
/** @addtogroup STM32F4xx_LL_Driver
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup UTILS_LL UTILS
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* Private types -------------------------------------------------------------*/
|
||||
/* Private variables ---------------------------------------------------------*/
|
||||
|
||||
/* Private constants ---------------------------------------------------------*/
|
||||
/** @defgroup UTILS_LL_Private_Constants UTILS Private Constants
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* Max delay can be used in LL_mDelay */
|
||||
#define LL_MAX_DELAY 0xFFFFFFFFU
|
||||
|
||||
/**
|
||||
* @brief Unique device ID register base address
|
||||
*/
|
||||
#define UID_BASE_ADDRESS UID_BASE
|
||||
|
||||
/**
|
||||
* @brief Flash size data register base address
|
||||
*/
|
||||
#define FLASHSIZE_BASE_ADDRESS FLASHSIZE_BASE
|
||||
|
||||
/**
|
||||
* @brief Package data register base address
|
||||
*/
|
||||
#define PACKAGE_BASE_ADDRESS PACKAGE_BASE
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Private macros ------------------------------------------------------------*/
|
||||
/** @defgroup UTILS_LL_Private_Macros UTILS Private Macros
|
||||
* @{
|
||||
*/
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
/* Exported types ------------------------------------------------------------*/
|
||||
/** @defgroup UTILS_LL_ES_INIT UTILS Exported structures
|
||||
* @{
|
||||
*/
|
||||
/**
|
||||
* @brief UTILS PLL structure definition
|
||||
*/
|
||||
typedef struct
|
||||
{
|
||||
uint32_t PLLM; /*!< Division factor for PLL VCO input clock.
|
||||
This parameter can be a value of @ref RCC_LL_EC_PLLM_DIV
|
||||
|
||||
This feature can be modified afterwards using unitary function
|
||||
@ref LL_RCC_PLL_ConfigDomain_SYS(). */
|
||||
|
||||
uint32_t PLLN; /*!< Multiplication factor for PLL VCO output clock.
|
||||
This parameter must be a number between Min_Data = @ref RCC_PLLN_MIN_VALUE
|
||||
and Max_Data = @ref RCC_PLLN_MIN_VALUE
|
||||
|
||||
This feature can be modified afterwards using unitary function
|
||||
@ref LL_RCC_PLL_ConfigDomain_SYS(). */
|
||||
|
||||
uint32_t PLLP; /*!< Division for the main system clock.
|
||||
This parameter can be a value of @ref RCC_LL_EC_PLLP_DIV
|
||||
|
||||
This feature can be modified afterwards using unitary function
|
||||
@ref LL_RCC_PLL_ConfigDomain_SYS(). */
|
||||
} LL_UTILS_PLLInitTypeDef;
|
||||
|
||||
/**
|
||||
* @brief UTILS System, AHB and APB buses clock configuration structure definition
|
||||
*/
|
||||
typedef struct
|
||||
{
|
||||
uint32_t AHBCLKDivider; /*!< The AHB clock (HCLK) divider. This clock is derived from the system clock (SYSCLK).
|
||||
This parameter can be a value of @ref RCC_LL_EC_SYSCLK_DIV
|
||||
|
||||
This feature can be modified afterwards using unitary function
|
||||
@ref LL_RCC_SetAHBPrescaler(). */
|
||||
|
||||
uint32_t APB1CLKDivider; /*!< The APB1 clock (PCLK1) divider. This clock is derived from the AHB clock (HCLK).
|
||||
This parameter can be a value of @ref RCC_LL_EC_APB1_DIV
|
||||
|
||||
This feature can be modified afterwards using unitary function
|
||||
@ref LL_RCC_SetAPB1Prescaler(). */
|
||||
|
||||
uint32_t APB2CLKDivider; /*!< The APB2 clock (PCLK2) divider. This clock is derived from the AHB clock (HCLK).
|
||||
This parameter can be a value of @ref RCC_LL_EC_APB2_DIV
|
||||
|
||||
This feature can be modified afterwards using unitary function
|
||||
@ref LL_RCC_SetAPB2Prescaler(). */
|
||||
|
||||
} LL_UTILS_ClkInitTypeDef;
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported constants --------------------------------------------------------*/
|
||||
/** @defgroup UTILS_LL_Exported_Constants UTILS Exported Constants
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup UTILS_EC_HSE_BYPASS HSE Bypass activation
|
||||
* @{
|
||||
*/
|
||||
#define LL_UTILS_HSEBYPASS_OFF 0x00000000U /*!< HSE Bypass is not enabled */
|
||||
#define LL_UTILS_HSEBYPASS_ON 0x00000001U /*!< HSE Bypass is enabled */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup UTILS_EC_PACKAGETYPE PACKAGE TYPE
|
||||
* @{
|
||||
*/
|
||||
#define LL_UTILS_PACKAGETYPE_WLCSP36_UFQFPN48_LQFP64 0x00000000U /*!< WLCSP36 or UFQFPN48 or LQFP64 package type */
|
||||
#define LL_UTILS_PACKAGETYPE_WLCSP168_FBGA169_LQFP100_LQFP64_UFQFPN48 0x00000100U /*!< WLCSP168 or FBGA169 or LQFP100 or LQFP64 or UFQFPN48 package type */
|
||||
#define LL_UTILS_PACKAGETYPE_WLCSP64_WLCSP81_LQFP176_UFBGA176 0x00000200U /*!< WLCSP64 or WLCSP81 or LQFP176 or UFBGA176 package type */
|
||||
#define LL_UTILS_PACKAGETYPE_LQFP144_UFBGA144_UFBGA144_UFBGA100 0x00000300U /*!< LQFP144 or UFBGA144 or UFBGA144 or UFBGA100 package type */
|
||||
#define LL_UTILS_PACKAGETYPE_LQFP100_LQFP208_TFBGA216 0x00000400U /*!< LQFP100 or LQFP208 or TFBGA216 package type */
|
||||
#define LL_UTILS_PACKAGETYPE_LQFP208_TFBGA216 0x00000500U /*!< LQFP208 or TFBGA216 package type */
|
||||
#define LL_UTILS_PACKAGETYPE_TQFP64_UFBGA144_LQFP144 0x00000700U /*!< TQFP64 or UFBGA144 or LQFP144 package type */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported macro ------------------------------------------------------------*/
|
||||
|
||||
/* Exported functions --------------------------------------------------------*/
|
||||
/** @defgroup UTILS_LL_Exported_Functions UTILS Exported Functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup UTILS_EF_DEVICE_ELECTRONIC_SIGNATURE DEVICE ELECTRONIC SIGNATURE
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief Get Word0 of the unique device identifier (UID based on 96 bits)
|
||||
* @retval UID[31:0]
|
||||
*/
|
||||
__STATIC_INLINE uint32_t LL_GetUID_Word0(void)
|
||||
{
|
||||
return (uint32_t)(READ_REG(*((uint32_t *)UID_BASE_ADDRESS)));
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Get Word1 of the unique device identifier (UID based on 96 bits)
|
||||
* @retval UID[63:32]
|
||||
*/
|
||||
__STATIC_INLINE uint32_t LL_GetUID_Word1(void)
|
||||
{
|
||||
return (uint32_t)(READ_REG(*((uint32_t *)(UID_BASE_ADDRESS + 4U))));
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Get Word2 of the unique device identifier (UID based on 96 bits)
|
||||
* @retval UID[95:64]
|
||||
*/
|
||||
__STATIC_INLINE uint32_t LL_GetUID_Word2(void)
|
||||
{
|
||||
return (uint32_t)(READ_REG(*((uint32_t *)(UID_BASE_ADDRESS + 8U))));
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Get Flash memory size
|
||||
* @note This bitfield indicates the size of the device Flash memory expressed in
|
||||
* Kbytes. As an example, 0x040 corresponds to 64 Kbytes.
|
||||
* @retval FLASH_SIZE[15:0]: Flash memory size
|
||||
*/
|
||||
__STATIC_INLINE uint32_t LL_GetFlashSize(void)
|
||||
{
|
||||
return (uint32_t)(READ_REG(*((uint32_t *)FLASHSIZE_BASE_ADDRESS)) & 0xFFFF);
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Get Package type
|
||||
* @retval Returned value can be one of the following values:
|
||||
* @arg @ref LL_UTILS_PACKAGETYPE_WLCSP36_UFQFPN48_LQFP64 (*)
|
||||
* @arg @ref LL_UTILS_PACKAGETYPE_WLCSP168_FBGA169_LQFP100_LQFP64_UFQFPN48 (*)
|
||||
* @arg @ref LL_UTILS_PACKAGETYPE_WLCSP64_WLCSP81_LQFP176_UFBGA176 (*)
|
||||
* @arg @ref LL_UTILS_PACKAGETYPE_LQFP144_UFBGA144_UFBGA144_UFBGA100 (*)
|
||||
* @arg @ref LL_UTILS_PACKAGETYPE_LQFP100_LQFP208_TFBGA216 (*)
|
||||
* @arg @ref LL_UTILS_PACKAGETYPE_LQFP208_TFBGA216 (*)
|
||||
* @arg @ref LL_UTILS_PACKAGETYPE_TQFP64_UFBGA144_LQFP144 (*)
|
||||
*
|
||||
* (*) value not defined in all devices.
|
||||
*/
|
||||
__STATIC_INLINE uint32_t LL_GetPackageType(void)
|
||||
{
|
||||
return (uint32_t)(READ_REG(*((uint32_t *)PACKAGE_BASE_ADDRESS)) & 0x0700U);
|
||||
}
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup UTILS_LL_EF_DELAY DELAY
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief This function configures the Cortex-M SysTick source of the time base.
|
||||
* @param HCLKFrequency HCLK frequency in Hz (can be calculated thanks to RCC helper macro)
|
||||
* @note When a RTOS is used, it is recommended to avoid changing the SysTick
|
||||
* configuration by calling this function, for a delay use rather osDelay RTOS service.
|
||||
* @param Ticks Number of ticks
|
||||
* @retval None
|
||||
*/
|
||||
__STATIC_INLINE void LL_InitTick(uint32_t HCLKFrequency, uint32_t Ticks)
|
||||
{
|
||||
/* Configure the SysTick to have interrupt in 1ms time base */
|
||||
SysTick->LOAD = (uint32_t)((HCLKFrequency / Ticks) - 1UL); /* set reload register */
|
||||
SysTick->VAL = 0UL; /* Load the SysTick Counter Value */
|
||||
SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk |
|
||||
SysTick_CTRL_ENABLE_Msk; /* Enable the Systick Timer */
|
||||
}
|
||||
|
||||
void LL_Init1msTick(uint32_t HCLKFrequency);
|
||||
void LL_mDelay(uint32_t Delay);
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup UTILS_EF_SYSTEM SYSTEM
|
||||
* @{
|
||||
*/
|
||||
|
||||
void LL_SetSystemCoreClock(uint32_t HCLKFrequency);
|
||||
ErrorStatus LL_PLL_ConfigSystemClock_HSI(LL_UTILS_PLLInitTypeDef *UTILS_PLLInitStruct,
|
||||
LL_UTILS_ClkInitTypeDef *UTILS_ClkInitStruct);
|
||||
ErrorStatus LL_PLL_ConfigSystemClock_HSE(uint32_t HSEFrequency, uint32_t HSEBypass,
|
||||
LL_UTILS_PLLInitTypeDef *UTILS_PLLInitStruct, LL_UTILS_ClkInitTypeDef *UTILS_ClkInitStruct);
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* __STM32F4xx_LL_UTILS_H */
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file stm32f4xx_ll_utils.h
|
||||
* @author MCD Application Team
|
||||
* @brief Header file of UTILS LL module.
|
||||
@verbatim
|
||||
==============================================================================
|
||||
##### How to use this driver #####
|
||||
==============================================================================
|
||||
[..]
|
||||
The LL UTILS driver contains a set of generic APIs that can be
|
||||
used by user:
|
||||
(+) Device electronic signature
|
||||
(+) Timing functions
|
||||
(+) PLL configuration functions
|
||||
|
||||
@endverbatim
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* Copyright (c) 2017 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software is licensed under terms that can be found in the LICENSE file
|
||||
* in the root directory of this software component.
|
||||
* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef __STM32F4xx_LL_UTILS_H
|
||||
#define __STM32F4xx_LL_UTILS_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "stm32f4xx.h"
|
||||
|
||||
/** @addtogroup STM32F4xx_LL_Driver
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup UTILS_LL UTILS
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* Private types -------------------------------------------------------------*/
|
||||
/* Private variables ---------------------------------------------------------*/
|
||||
|
||||
/* Private constants ---------------------------------------------------------*/
|
||||
/** @defgroup UTILS_LL_Private_Constants UTILS Private Constants
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* Max delay can be used in LL_mDelay */
|
||||
#define LL_MAX_DELAY 0xFFFFFFFFU
|
||||
|
||||
/**
|
||||
* @brief Unique device ID register base address
|
||||
*/
|
||||
#define UID_BASE_ADDRESS UID_BASE
|
||||
|
||||
/**
|
||||
* @brief Flash size data register base address
|
||||
*/
|
||||
#define FLASHSIZE_BASE_ADDRESS FLASHSIZE_BASE
|
||||
|
||||
/**
|
||||
* @brief Package data register base address
|
||||
*/
|
||||
#define PACKAGE_BASE_ADDRESS PACKAGE_BASE
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Private macros ------------------------------------------------------------*/
|
||||
/** @defgroup UTILS_LL_Private_Macros UTILS Private Macros
|
||||
* @{
|
||||
*/
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
/* Exported types ------------------------------------------------------------*/
|
||||
/** @defgroup UTILS_LL_ES_INIT UTILS Exported structures
|
||||
* @{
|
||||
*/
|
||||
/**
|
||||
* @brief UTILS PLL structure definition
|
||||
*/
|
||||
typedef struct
|
||||
{
|
||||
uint32_t PLLM; /*!< Division factor for PLL VCO input clock.
|
||||
This parameter can be a value of @ref RCC_LL_EC_PLLM_DIV
|
||||
|
||||
This feature can be modified afterwards using unitary function
|
||||
@ref LL_RCC_PLL_ConfigDomain_SYS(). */
|
||||
|
||||
uint32_t PLLN; /*!< Multiplication factor for PLL VCO output clock.
|
||||
This parameter must be a number between Min_Data = @ref RCC_PLLN_MIN_VALUE
|
||||
and Max_Data = @ref RCC_PLLN_MIN_VALUE
|
||||
|
||||
This feature can be modified afterwards using unitary function
|
||||
@ref LL_RCC_PLL_ConfigDomain_SYS(). */
|
||||
|
||||
uint32_t PLLP; /*!< Division for the main system clock.
|
||||
This parameter can be a value of @ref RCC_LL_EC_PLLP_DIV
|
||||
|
||||
This feature can be modified afterwards using unitary function
|
||||
@ref LL_RCC_PLL_ConfigDomain_SYS(). */
|
||||
} LL_UTILS_PLLInitTypeDef;
|
||||
|
||||
/**
|
||||
* @brief UTILS System, AHB and APB buses clock configuration structure definition
|
||||
*/
|
||||
typedef struct
|
||||
{
|
||||
uint32_t AHBCLKDivider; /*!< The AHB clock (HCLK) divider. This clock is derived from the system clock (SYSCLK).
|
||||
This parameter can be a value of @ref RCC_LL_EC_SYSCLK_DIV
|
||||
|
||||
This feature can be modified afterwards using unitary function
|
||||
@ref LL_RCC_SetAHBPrescaler(). */
|
||||
|
||||
uint32_t APB1CLKDivider; /*!< The APB1 clock (PCLK1) divider. This clock is derived from the AHB clock (HCLK).
|
||||
This parameter can be a value of @ref RCC_LL_EC_APB1_DIV
|
||||
|
||||
This feature can be modified afterwards using unitary function
|
||||
@ref LL_RCC_SetAPB1Prescaler(). */
|
||||
|
||||
uint32_t APB2CLKDivider; /*!< The APB2 clock (PCLK2) divider. This clock is derived from the AHB clock (HCLK).
|
||||
This parameter can be a value of @ref RCC_LL_EC_APB2_DIV
|
||||
|
||||
This feature can be modified afterwards using unitary function
|
||||
@ref LL_RCC_SetAPB2Prescaler(). */
|
||||
|
||||
} LL_UTILS_ClkInitTypeDef;
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported constants --------------------------------------------------------*/
|
||||
/** @defgroup UTILS_LL_Exported_Constants UTILS Exported Constants
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup UTILS_EC_HSE_BYPASS HSE Bypass activation
|
||||
* @{
|
||||
*/
|
||||
#define LL_UTILS_HSEBYPASS_OFF 0x00000000U /*!< HSE Bypass is not enabled */
|
||||
#define LL_UTILS_HSEBYPASS_ON 0x00000001U /*!< HSE Bypass is enabled */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup UTILS_EC_PACKAGETYPE PACKAGE TYPE
|
||||
* @{
|
||||
*/
|
||||
#define LL_UTILS_PACKAGETYPE_WLCSP36_UFQFPN48_LQFP64 0x00000000U /*!< WLCSP36 or UFQFPN48 or LQFP64 package type */
|
||||
#define LL_UTILS_PACKAGETYPE_WLCSP168_FBGA169_LQFP100_LQFP64_UFQFPN48 0x00000100U /*!< WLCSP168 or FBGA169 or LQFP100 or LQFP64 or UFQFPN48 package type */
|
||||
#define LL_UTILS_PACKAGETYPE_WLCSP64_WLCSP81_LQFP176_UFBGA176 0x00000200U /*!< WLCSP64 or WLCSP81 or LQFP176 or UFBGA176 package type */
|
||||
#define LL_UTILS_PACKAGETYPE_LQFP144_UFBGA144_UFBGA144_UFBGA100 0x00000300U /*!< LQFP144 or UFBGA144 or UFBGA144 or UFBGA100 package type */
|
||||
#define LL_UTILS_PACKAGETYPE_LQFP100_LQFP208_TFBGA216 0x00000400U /*!< LQFP100 or LQFP208 or TFBGA216 package type */
|
||||
#define LL_UTILS_PACKAGETYPE_LQFP208_TFBGA216 0x00000500U /*!< LQFP208 or TFBGA216 package type */
|
||||
#define LL_UTILS_PACKAGETYPE_TQFP64_UFBGA144_LQFP144 0x00000700U /*!< TQFP64 or UFBGA144 or LQFP144 package type */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported macro ------------------------------------------------------------*/
|
||||
|
||||
/* Exported functions --------------------------------------------------------*/
|
||||
/** @defgroup UTILS_LL_Exported_Functions UTILS Exported Functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup UTILS_EF_DEVICE_ELECTRONIC_SIGNATURE DEVICE ELECTRONIC SIGNATURE
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief Get Word0 of the unique device identifier (UID based on 96 bits)
|
||||
* @retval UID[31:0]
|
||||
*/
|
||||
__STATIC_INLINE uint32_t LL_GetUID_Word0(void)
|
||||
{
|
||||
return (uint32_t)(READ_REG(*((uint32_t *)UID_BASE_ADDRESS)));
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Get Word1 of the unique device identifier (UID based on 96 bits)
|
||||
* @retval UID[63:32]
|
||||
*/
|
||||
__STATIC_INLINE uint32_t LL_GetUID_Word1(void)
|
||||
{
|
||||
return (uint32_t)(READ_REG(*((uint32_t *)(UID_BASE_ADDRESS + 4U))));
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Get Word2 of the unique device identifier (UID based on 96 bits)
|
||||
* @retval UID[95:64]
|
||||
*/
|
||||
__STATIC_INLINE uint32_t LL_GetUID_Word2(void)
|
||||
{
|
||||
return (uint32_t)(READ_REG(*((uint32_t *)(UID_BASE_ADDRESS + 8U))));
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Get Flash memory size
|
||||
* @note This bitfield indicates the size of the device Flash memory expressed in
|
||||
* Kbytes. As an example, 0x040 corresponds to 64 Kbytes.
|
||||
* @retval FLASH_SIZE[15:0]: Flash memory size
|
||||
*/
|
||||
__STATIC_INLINE uint32_t LL_GetFlashSize(void)
|
||||
{
|
||||
return (uint32_t)(READ_REG(*((uint32_t *)FLASHSIZE_BASE_ADDRESS)) & 0xFFFF);
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Get Package type
|
||||
* @retval Returned value can be one of the following values:
|
||||
* @arg @ref LL_UTILS_PACKAGETYPE_WLCSP36_UFQFPN48_LQFP64 (*)
|
||||
* @arg @ref LL_UTILS_PACKAGETYPE_WLCSP168_FBGA169_LQFP100_LQFP64_UFQFPN48 (*)
|
||||
* @arg @ref LL_UTILS_PACKAGETYPE_WLCSP64_WLCSP81_LQFP176_UFBGA176 (*)
|
||||
* @arg @ref LL_UTILS_PACKAGETYPE_LQFP144_UFBGA144_UFBGA144_UFBGA100 (*)
|
||||
* @arg @ref LL_UTILS_PACKAGETYPE_LQFP100_LQFP208_TFBGA216 (*)
|
||||
* @arg @ref LL_UTILS_PACKAGETYPE_LQFP208_TFBGA216 (*)
|
||||
* @arg @ref LL_UTILS_PACKAGETYPE_TQFP64_UFBGA144_LQFP144 (*)
|
||||
*
|
||||
* (*) value not defined in all devices.
|
||||
*/
|
||||
__STATIC_INLINE uint32_t LL_GetPackageType(void)
|
||||
{
|
||||
return (uint32_t)(READ_REG(*((uint32_t *)PACKAGE_BASE_ADDRESS)) & 0x0700U);
|
||||
}
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup UTILS_LL_EF_DELAY DELAY
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief This function configures the Cortex-M SysTick source of the time base.
|
||||
* @param HCLKFrequency HCLK frequency in Hz (can be calculated thanks to RCC helper macro)
|
||||
* @note When a RTOS is used, it is recommended to avoid changing the SysTick
|
||||
* configuration by calling this function, for a delay use rather osDelay RTOS service.
|
||||
* @param Ticks Frequency of Ticks (Hz)
|
||||
* @retval None
|
||||
*/
|
||||
__STATIC_INLINE void LL_InitTick(uint32_t HCLKFrequency, uint32_t Ticks)
|
||||
{
|
||||
/* Configure the SysTick to have interrupt in 1ms time base */
|
||||
SysTick->LOAD = (uint32_t)((HCLKFrequency / Ticks) - 1UL); /* set reload register */
|
||||
SysTick->VAL = 0UL; /* Load the SysTick Counter Value */
|
||||
SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk |
|
||||
SysTick_CTRL_ENABLE_Msk; /* Enable the Systick Timer */
|
||||
}
|
||||
|
||||
void LL_Init1msTick(uint32_t HCLKFrequency);
|
||||
void LL_mDelay(uint32_t Delay);
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup UTILS_EF_SYSTEM SYSTEM
|
||||
* @{
|
||||
*/
|
||||
|
||||
void LL_SetSystemCoreClock(uint32_t HCLKFrequency);
|
||||
ErrorStatus LL_SetFlashLatency(uint32_t HCLK_Frequency);
|
||||
ErrorStatus LL_PLL_ConfigSystemClock_HSI(LL_UTILS_PLLInitTypeDef *UTILS_PLLInitStruct,
|
||||
LL_UTILS_ClkInitTypeDef *UTILS_ClkInitStruct);
|
||||
ErrorStatus LL_PLL_ConfigSystemClock_HSE(uint32_t HSEFrequency, uint32_t HSEBypass,
|
||||
LL_UTILS_PLLInitTypeDef *UTILS_PLLInitStruct, LL_UTILS_ClkInitTypeDef *UTILS_ClkInitStruct);
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* __STM32F4xx_LL_UTILS_H */
|
||||
|
|
|
|||
Loading…
Add table
Add a link
Reference in a new issue