tmp 2

components/app/inc/application.h

@@ -0,0 +1,23 @@
+/*
+ * app.h
+ *
+ *  Created on: Aug 29, 2019
+ *      Author: abody
+ */
+
+#ifndef APP_H_
+#define APP_H_
+
+#include <inttypes.h>
+#include "main.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+void MainLoop();
+
+#ifdef __cplusplus
+}	//	extern "C" {
+#endif	//	__cplusplus
+#endif /* APP_H_ */

components/app/inc/config.h

@@ -0,0 +1,27 @@
+/*
+ * config.h
+ *
+ *  Created on: Sep 24, 2019
+ *      Author: abody
+ */
+
+#ifndef CONFIG_H_
+#define CONFIG_H_
+
+#define USARTCOUNT 4
+#define CRCTASKCOUNT (USARTCOUNT * 2)
+#define USART1_OFFSET 0
+#define USART2_OFFSET 1
+#define USART3_OFFSET 2
+#define USART6_OFFSET 3
+
+#define CONSOLE_DMA_ENGINE DMA1
+#define CONSOLE_TX_DMA_STREAM LL_DMA_STREAM_4
+
+#define CRC_DMA_ENGINE DMA2
+#define CRC_DMA_STREAM LL_DMA_STREAM_4
+
+#define MEMCPY_DMA_ENGINE DMA2
+#define MEMCPY_DMA_STREAM LL_DMA_STREAM_3
+
+#endif /* CONFIG_H_ */

components/app/inc/diag.h

@@ -0,0 +1,63 @@
+/*
+ * diag.h
+ *
+ *  Created on: Sep 16, 2019
+ *      Author: abody
+ */
+
+#ifndef DIAG_H_
+#define DIAG_H_
+
+#ifdef ENABLE_DIAG
+#define DIAG_RX_BUFFER_SWITCH(x) \
+if(x) { \
+	LL_GPIO_SetOutputPin(LED0_GPIO_Port, LED0_Pin); \
+	LL_GPIO_ResetOutputPin(LED1_GPIO_Port, LED1_Pin); \
+} else { \
+	LL_GPIO_ResetOutputPin(LED0_GPIO_Port, LED0_Pin); \
+	LL_GPIO_SetOutputPin(LED1_GPIO_Port, LED1_Pin); \
+}
+
+#define DIAG_INTERRUPT_IN() LL_GPIO_SetOutputPin(DBG0_GPIO_Port, DBG0_Pin)
+#define DIAG_INTERRUPT_OUT() LL_GPIO_ResetOutputPin(DBG0_GPIO_Port, DBG0_Pin)
+#define DIAG_CRC_CALC_START() LL_GPIO_SetOutputPin(DBG1_GPIO_Port, DBG1_Pin)
+#define DIAG_CRC_CALC_END() LL_GPIO_ResetOutputPin(DBG1_GPIO_Port, DBG1_Pin)
+//#define DIAG_ERROR_EVENT() LL_GPIO_TogglePin(DBG2_GPIO_Port, DBG2_Pin)
+#define DIAG_ENTER_BUSY() LL_GPIO_SetOutputPin(DBG2_GPIO_Port, DBG2_Pin)
+#define DIAG_EXIT_BUSY() LL_GPIO_ResetOutputPin(DBG2_GPIO_Port, DBG2_Pin)
+
+#endif	//	_ENABLE_DIAG
+
+#ifndef DIAG_RX_BUFFER_SWITCH
+#	define DIAG_RX_BUFFER_SWITCH(x)
+#endif
+
+#ifndef DIAG_CRC_CALC_START
+#	define DIAG_CRC_CALC_START()
+#endif
+
+#ifndef DIAG_CRC_CALC_END
+#	define DIAG_CRC_CALC_END()
+#endif
+
+#ifndef DIAG_INTERRUPT_IN
+#	define DIAG_INTERRUPT_IN()
+#endif
+
+#ifndef DIAG_INTERRUPT_OUT
+#	define DIAG_INTERRUPT_OUT()
+#endif
+
+#ifndef DIAG_ERROR_EVENT
+#	define DIAG_ERROR_EVENT()
+#endif
+
+#ifndef DIAG_ENTER_BUSY
+#	define DIAG_ENTER_BUSY()
+#endif
+
+#ifndef DIAG_EXIT_BUSY
+#	define DIAG_EXIT_BUSY()
+#endif
+
+#endif /* DIAG_H_ */

components/app/inc/globals.h

@@ -0,0 +1,15 @@
+/*
+ * globals.h
+ *
+ *  Created on: Aug 29, 2019
+ *      Author: abody
+ */
+
+#pragma once
+
+#include <config.h>
+#include <f4ll/packet_usart.h>
+#include <inttypes.h>
+
+extern f4ll::PacketUsart *g_usarts[USARTCOUNT];
+extern uint8_t g_statsBuf[256];

components/app/inc/irq_bridge.h

@@ -0,0 +1,32 @@
+#pragma once
+
+#if defined(__cplusplus)
+extern "C" {
+#endif
+
+void usart1_rx_dma_isr(void);
+void usart1_tx_dma_isr(void);
+void usart1_isr(void);
+
+void usart2_rx_dma_isr(void);
+void usart2_tx_dma_isr(void);
+void usart2_isr(void);
+
+void usart3_rx_dma_isr(void);
+void usart3_tx_dma_isr(void);
+void usart3_isr(void);
+
+void usart4_rx_dma_isr(void); //  console
+void usart4_tx_dma_isr(void); //  console
+void usart4_isr(void);
+
+void usart6_rx_dma_isr(void); //  console
+void usart6_tx_dma_isr(void); //  console
+void usart6_isr(void);
+
+void m2m1_dma_isr(void); //  m2mcpy
+void m2m2_dma_isr(void); //  crc
+
+#if defined(__cplusplus)
+}
+#endif