diff --git a/.cproject b/.cproject index 862f96a..e438e65 100644 --- a/.cproject +++ b/.cproject @@ -10,21 +10,22 @@ + - - - + \ No newline at end of file diff --git a/.mxproject b/.mxproject index 43de001..f24ad47 100644 --- a/.mxproject +++ b/.mxproject @@ -1,14 +1,14 @@ -[PreviousGenFiles] -HeaderPath=/home/abody/Private/work/private/F407_test/Inc -HeaderFiles=stm32f4xx_it.h;stm32f4xx_hal_conf.h;main.h;stm32_assert.h;gpio.h;fsmc.h;usart.h;dma.h;crc.h;spi.h; -SourcePath=/home/abody/Private/work/private/F407_test/Src -SourceFiles=stm32f4xx_it.c;stm32f4xx_hal_msp.c;main.c;gpio.c;fsmc.c;usart.c;dma.c;crc.c;spi.c; - [PreviousLibFiles] LibFiles=Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_gpio.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_system.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_rcc.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_crc.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_rcc.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_rcc_ex.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_flash.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_flash_ex.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_flash_ramfunc.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_gpio.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_gpio_ex.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_dma_ex.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_dma.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_pwr.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_pwr_ex.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_cortex.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal.h;Drivers/STM32F4xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_def.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_exti.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_bus.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_cortex.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_utils.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_exti.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_pwr.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_dma.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_dmamux.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_fsmc.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_sram.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_spi.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_tim.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_tim_ex.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_usart.h;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_gpio.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_crc.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_rcc.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_rcc_ex.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_flash.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_flash_ex.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_flash_ramfunc.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_gpio.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_dma_ex.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_dma.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_pwr.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_pwr_ex.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_cortex.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_exti.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_rcc.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_utils.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_exti.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_dma.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_fsmc.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_sram.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_spi.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_tim.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_tim_ex.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_usart.c;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_gpio.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_system.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_rcc.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_crc.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_rcc.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_rcc_ex.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_flash.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_flash_ex.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_flash_ramfunc.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_gpio.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_gpio_ex.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_dma_ex.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_dma.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_pwr.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_pwr_ex.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_cortex.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal.h;Drivers/STM32F4xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_def.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_exti.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_bus.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_cortex.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_utils.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_exti.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_pwr.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_dma.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_dmamux.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_fsmc.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_sram.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_spi.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_tim.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_tim_ex.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_usart.h;Drivers/CMSIS/Device/ST/STM32F4xx/Include/stm32f407xx.h;Drivers/CMSIS/Device/ST/STM32F4xx/Include/stm32f4xx.h;Drivers/CMSIS/Device/ST/STM32F4xx/Include/system_stm32f4xx.h;Drivers/CMSIS/Device/ST/STM32F4xx/Source/Templates/system_stm32f4xx.c;Drivers/CMSIS/Include/cmsis_armcc.h;Drivers/CMSIS/Include/cmsis_armclang.h;Drivers/CMSIS/Include/cmsis_compiler.h;Drivers/CMSIS/Include/cmsis_gcc.h;Drivers/CMSIS/Include/cmsis_iccarm.h;Drivers/CMSIS/Include/cmsis_version.h;Drivers/CMSIS/Include/core_armv8mbl.h;Drivers/CMSIS/Include/core_armv8mml.h;Drivers/CMSIS/Include/core_cm0.h;Drivers/CMSIS/Include/core_cm0plus.h;Drivers/CMSIS/Include/core_cm1.h;Drivers/CMSIS/Include/core_cm23.h;Drivers/CMSIS/Include/core_cm3.h;Drivers/CMSIS/Include/core_cm33.h;Drivers/CMSIS/Include/core_cm4.h;Drivers/CMSIS/Include/core_cm7.h;Drivers/CMSIS/Include/core_sc000.h;Drivers/CMSIS/Include/core_sc300.h;Drivers/CMSIS/Include/mpu_armv7.h;Drivers/CMSIS/Include/mpu_armv8.h;Drivers/CMSIS/Include/tz_context.h; [PreviousUsedCubeIDEFiles] -SourceFiles=Src/main.c;Src/gpio.c;Src/crc.c;Src/dma.c;Src/fsmc.c;Src/spi.c;Src/usart.c;Src/stm32f4xx_it.c;Src/stm32f4xx_hal_msp.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_gpio.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_crc.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_rcc.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_rcc_ex.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_flash.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_flash_ex.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_flash_ramfunc.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_gpio.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_dma_ex.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_dma.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_pwr.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_pwr_ex.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_cortex.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_exti.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_rcc.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_utils.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_exti.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_dma.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_fsmc.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_sram.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_spi.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_tim.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_tim_ex.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_usart.c;Src/system_stm32f4xx.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_gpio.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_crc.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_rcc.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_rcc_ex.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_flash.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_flash_ex.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_flash_ramfunc.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_gpio.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_dma_ex.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_dma.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_pwr.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_pwr_ex.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_cortex.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_exti.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_rcc.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_utils.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_exti.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_dma.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_fsmc.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_sram.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_spi.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_tim.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_tim_ex.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_usart.c;Src/system_stm32f4xx.c;Drivers/CMSIS/Device/ST/STM32F4xx/Source/Templates/system_stm32f4xx.c;; +SourceFiles=Src/main.c;Src/gpio.c;Src/crc.c;Src/dma.c;Src/fsmc.c;Src/spi.c;Src/usart.c;Src/stm32f4xx_it.c;Src/stm32f4xx_hal_msp.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_gpio.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_crc.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_rcc.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_rcc_ex.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_flash.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_flash_ex.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_flash_ramfunc.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_gpio.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_dma_ex.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_dma.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_pwr.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_pwr_ex.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_cortex.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_exti.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_rcc.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_utils.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_exti.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_dma.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_fsmc.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_sram.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_spi.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_tim.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_tim_ex.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_usart.c;Drivers/CMSIS/Device/ST/STM32F4xx/Source/Templates/system_stm32f4xx.c;Src/system_stm32f4xx.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_gpio.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_crc.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_rcc.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_rcc_ex.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_flash.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_flash_ex.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_flash_ramfunc.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_gpio.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_dma_ex.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_dma.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_pwr.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_pwr_ex.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_cortex.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_exti.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_rcc.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_utils.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_exti.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_dma.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_fsmc.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_sram.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_spi.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_tim.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_tim_ex.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_usart.c;Drivers/CMSIS/Device/ST/STM32F4xx/Source/Templates/system_stm32f4xx.c;Src/system_stm32f4xx.c;;; HeaderPath=Drivers/STM32F4xx_HAL_Driver/Inc;Drivers/STM32F4xx_HAL_Driver/Inc/Legacy;Drivers/CMSIS/Device/ST/STM32F4xx/Include;Drivers/CMSIS/Include;Inc; -CDefines=USE_FULL_LL_DRIVER;USE_HAL_DRIVER;STM32F407xx;USE_HAL_DRIVER;USE_HAL_DRIVER; +CDefines=USE_FULL_LL_DRIVER;USE_HAL_DRIVER;STM32F407xx;USE_FULL_LL_DRIVER;USE_HAL_DRIVER;USE_HAL_DRIVER; + +[PreviousGenFiles] +HeaderPath=/mnt/userdata/compi/work/private/stm32/F407_test/Inc +HeaderFiles=gpio.h;crc.h;dma.h;fsmc.h;spi.h;usart.h;stm32f4xx_it.h;stm32_assert.h;stm32f4xx_hal_conf.h;main.h; +SourcePath=/mnt/userdata/compi/work/private/stm32/F407_test/Src +SourceFiles=gpio.c;crc.c;dma.c;fsmc.c;spi.c;usart.c;stm32f4xx_it.c;stm32f4xx_hal_msp.c;main.c; diff --git a/.project b/.project index 3026211..643bbba 100644 --- a/.project +++ b/.project @@ -27,5 +27,6 @@ org.eclipse.cdt.managedbuilder.core.managedBuildNature org.eclipse.cdt.managedbuilder.core.ScannerConfigNature org.eclipse.cdt.core.ccnature + com.st.stm32cube.ide.mcu.MCUCubeIdeServicesRevAev2ProjectNature diff --git a/Drivers/CMSIS/Device/ST/STM32F4xx/Include/stm32f407xx.h b/Drivers/CMSIS/Device/ST/STM32F4xx/Include/stm32f407xx.h index 62813a2..6534e64 100644 --- a/Drivers/CMSIS/Device/ST/STM32F4xx/Include/stm32f407xx.h +++ b/Drivers/CMSIS/Device/ST/STM32F4xx/Include/stm32f407xx.h @@ -12,29 +12,13 @@ ****************************************************************************** * @attention * - *

© COPYRIGHT(c) 2017 STMicroelectronics

+ *

© Copyright (c) 2017 STMicroelectronics. + * All rights reserved.

* - * Redistribution and use in source and binary forms, with or without modification, - * are permitted provided that the following conditions are met: - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause * ****************************************************************************** */ @@ -1164,7 +1148,15 @@ typedef struct /** @addtogroup Exported_constants * @{ */ - + +/** @addtogroup Hardware_Constant_Definition + * @{ + */ +#define LSI_STARTUP_TIME 40U /*!< LSI Maximum startup time in us */ +/** + * @} + */ + /** @addtogroup Peripheral_Registers_Bits_Definition * @{ */ @@ -6689,17 +6681,18 @@ typedef struct /* */ /******************************************************************************/ /******************* Bits definition for FLASH_ACR register *****************/ -#define FLASH_ACR_LATENCY_Pos (0U) -#define FLASH_ACR_LATENCY_Msk (0xFUL << FLASH_ACR_LATENCY_Pos) /*!< 0x0000000F */ -#define FLASH_ACR_LATENCY FLASH_ACR_LATENCY_Msk -#define FLASH_ACR_LATENCY_0WS 0x00000000U -#define FLASH_ACR_LATENCY_1WS 0x00000001U -#define FLASH_ACR_LATENCY_2WS 0x00000002U -#define FLASH_ACR_LATENCY_3WS 0x00000003U -#define FLASH_ACR_LATENCY_4WS 0x00000004U -#define FLASH_ACR_LATENCY_5WS 0x00000005U -#define FLASH_ACR_LATENCY_6WS 0x00000006U -#define FLASH_ACR_LATENCY_7WS 0x00000007U +#define FLASH_ACR_LATENCY_Pos (0U) +#define FLASH_ACR_LATENCY_Msk (0x7UL << FLASH_ACR_LATENCY_Pos) /*!< 0x00000007 */ +#define FLASH_ACR_LATENCY FLASH_ACR_LATENCY_Msk +#define FLASH_ACR_LATENCY_0WS 0x00000000U +#define FLASH_ACR_LATENCY_1WS 0x00000001U +#define FLASH_ACR_LATENCY_2WS 0x00000002U +#define FLASH_ACR_LATENCY_3WS 0x00000003U +#define FLASH_ACR_LATENCY_4WS 0x00000004U +#define FLASH_ACR_LATENCY_5WS 0x00000005U +#define FLASH_ACR_LATENCY_6WS 0x00000006U +#define FLASH_ACR_LATENCY_7WS 0x00000007U + #define FLASH_ACR_PRFTEN_Pos (8U) #define FLASH_ACR_PRFTEN_Msk (0x1UL << FLASH_ACR_PRFTEN_Pos) /*!< 0x00000100 */ @@ -6775,6 +6768,9 @@ typedef struct #define FLASH_CR_EOPIE_Pos (24U) #define FLASH_CR_EOPIE_Msk (0x1UL << FLASH_CR_EOPIE_Pos) /*!< 0x01000000 */ #define FLASH_CR_EOPIE FLASH_CR_EOPIE_Msk +#define FLASH_CR_ERRIE_Pos (25U) +#define FLASH_CR_ERRIE_Msk (0x1UL << FLASH_CR_ERRIE_Pos) +#define FLASH_CR_ERRIE FLASH_CR_ERRIE_Msk #define FLASH_CR_LOCK_Pos (31U) #define FLASH_CR_LOCK_Msk (0x1UL << FLASH_CR_LOCK_Pos) /*!< 0x80000000 */ #define FLASH_CR_LOCK FLASH_CR_LOCK_Msk @@ -8138,7 +8134,7 @@ typedef struct #define GPIO_MODER_MODE1 GPIO_MODER_MODER1 #define GPIO_MODER_MODE1_0 GPIO_MODER_MODER1_0 #define GPIO_MODER_MODE1_1 GPIO_MODER_MODER1_1 -#define GPIO_MODER_MODE2_Pos GPIO_MODER_MODER2_PoS +#define GPIO_MODER_MODE2_Pos GPIO_MODER_MODER2_Pos #define GPIO_MODER_MODE2_Msk GPIO_MODER_MODER2_Msk #define GPIO_MODER_MODE2 GPIO_MODER_MODER2 #define GPIO_MODER_MODE2_0 GPIO_MODER_MODER2_0 @@ -8169,7 +8165,7 @@ typedef struct #define GPIO_MODER_MODE7_0 GPIO_MODER_MODER7_0 #define GPIO_MODER_MODE7_1 GPIO_MODER_MODER7_1 #define GPIO_MODER_MODE8_Pos GPIO_MODER_MODER8_Pos -#define GPIO_MODER_MODE8_Msk GPIO_MODER_MODER2_Msk +#define GPIO_MODER_MODE8_Msk GPIO_MODER_MODER8_Msk #define GPIO_MODER_MODE8 GPIO_MODER_MODER8 #define GPIO_MODER_MODE8_0 GPIO_MODER_MODER8_0 #define GPIO_MODER_MODE8_1 GPIO_MODER_MODER8_1 diff --git a/Drivers/CMSIS/Device/ST/STM32F4xx/Include/stm32f4xx.h b/Drivers/CMSIS/Device/ST/STM32F4xx/Include/stm32f4xx.h index d61f013..052b285 100644 --- a/Drivers/CMSIS/Device/ST/STM32F4xx/Include/stm32f4xx.h +++ b/Drivers/CMSIS/Device/ST/STM32F4xx/Include/stm32f4xx.h @@ -16,29 +16,13 @@ ****************************************************************************** * @attention * - *

© COPYRIGHT(c) 2017 STMicroelectronics

+ *

© Copyright (c) 2017 STMicroelectronics. + * All rights reserved.

* - * Redistribution and use in source and binary forms, with or without modification, - * are permitted provided that the following conditions are met: - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause * ****************************************************************************** */ @@ -122,16 +106,16 @@ #endif /* USE_HAL_DRIVER */ /** - * @brief CMSIS version number V2.6.4 + * @brief CMSIS version number V2.6.7 */ #define __STM32F4xx_CMSIS_VERSION_MAIN (0x02U) /*!< [31:24] main version */ #define __STM32F4xx_CMSIS_VERSION_SUB1 (0x06U) /*!< [23:16] sub1 version */ -#define __STM32F4xx_CMSIS_VERSION_SUB2 (0x04U) /*!< [15:8] sub2 version */ +#define __STM32F4xx_CMSIS_VERSION_SUB2 (0x07U) /*!< [15:8] sub2 version */ #define __STM32F4xx_CMSIS_VERSION_RC (0x00U) /*!< [7:0] release candidate */ #define __STM32F4xx_CMSIS_VERSION ((__STM32F4xx_CMSIS_VERSION_MAIN << 24)\ |(__STM32F4xx_CMSIS_VERSION_SUB1 << 16)\ |(__STM32F4xx_CMSIS_VERSION_SUB2 << 8 )\ - |(__STM32F4xx_CMSIS_VERSION)) + |(__STM32F4xx_CMSIS_VERSION_RC)) /** * @} @@ -241,6 +225,60 @@ typedef enum #define POSITION_VAL(VAL) (__CLZ(__RBIT(VAL))) +/* Use of CMSIS compiler intrinsics for register exclusive access */ +/* Atomic 32-bit register access macro to set one or several bits */ +#define ATOMIC_SET_BIT(REG, BIT) \ + do { \ + uint32_t val; \ + do { \ + val = __LDREXW((__IO uint32_t *)&(REG)) | (BIT); \ + } while ((__STREXW(val,(__IO uint32_t *)&(REG))) != 0U); \ + } while(0) + +/* Atomic 32-bit register access macro to clear one or several bits */ +#define ATOMIC_CLEAR_BIT(REG, BIT) \ + do { \ + uint32_t val; \ + do { \ + val = __LDREXW((__IO uint32_t *)&(REG)) & ~(BIT); \ + } while ((__STREXW(val,(__IO uint32_t *)&(REG))) != 0U); \ + } while(0) + +/* Atomic 32-bit register access macro to clear and set one or several bits */ +#define ATOMIC_MODIFY_REG(REG, CLEARMSK, SETMASK) \ + do { \ + uint32_t val; \ + do { \ + val = (__LDREXW((__IO uint32_t *)&(REG)) & ~(CLEARMSK)) | (SETMASK); \ + } while ((__STREXW(val,(__IO uint32_t *)&(REG))) != 0U); \ + } while(0) + +/* Atomic 16-bit register access macro to set one or several bits */ +#define ATOMIC_SETH_BIT(REG, BIT) \ + do { \ + uint16_t val; \ + do { \ + val = __LDREXH((__IO uint16_t *)&(REG)) | (BIT); \ + } while ((__STREXH(val,(__IO uint16_t *)&(REG))) != 0U); \ + } while(0) + +/* Atomic 16-bit register access macro to clear one or several bits */ +#define ATOMIC_CLEARH_BIT(REG, BIT) \ + do { \ + uint16_t val; \ + do { \ + val = __LDREXH((__IO uint16_t *)&(REG)) & ~(BIT); \ + } while ((__STREXH(val,(__IO uint16_t *)&(REG))) != 0U); \ + } while(0) + +/* Atomic 16-bit register access macro to clear and set one or several bits */ +#define ATOMIC_MODIFYH_REG(REG, CLEARMSK, SETMASK) \ + do { \ + uint16_t val; \ + do { \ + val = (__LDREXH((__IO uint16_t *)&(REG)) & ~(CLEARMSK)) | (SETMASK); \ + } while ((__STREXH(val,(__IO uint16_t *)&(REG))) != 0U); \ + } while(0) /** * @} diff --git a/Drivers/STM32F4xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h b/Drivers/STM32F4xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h index 9bc45bb..f0024c6 100644 --- a/Drivers/STM32F4xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h +++ b/Drivers/STM32F4xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h @@ -23,7 +23,7 @@ #define STM32_HAL_LEGACY #ifdef __cplusplus - extern "C" { +extern "C" { #endif /* Includes ------------------------------------------------------------------*/ @@ -38,7 +38,14 @@ #define AES_CLEARFLAG_CCF CRYP_CLEARFLAG_CCF #define AES_CLEARFLAG_RDERR CRYP_CLEARFLAG_RDERR #define AES_CLEARFLAG_WRERR CRYP_CLEARFLAG_WRERR - +#if defined(STM32U5) +#define CRYP_DATATYPE_32B CRYP_NO_SWAP +#define CRYP_DATATYPE_16B CRYP_HALFWORD_SWAP +#define CRYP_DATATYPE_8B CRYP_BYTE_SWAP +#define CRYP_DATATYPE_1B CRYP_BIT_SWAP +#define CRYP_CCF_CLEAR CRYP_CLEAR_CCF +#define CRYP_ERR_CLEAR CRYP_CLEAR_RWEIF +#endif /* STM32U5 */ /** * @} */ @@ -211,6 +218,10 @@ * @} */ +/** + * @} + */ + /** @defgroup HAL_CRC_Aliased_Defines HAL CRC Aliased Defines maintained for legacy purpose * @{ */ @@ -236,12 +247,12 @@ #define DAC_WAVEGENERATION_NOISE DAC_WAVE_NOISE #define DAC_WAVEGENERATION_TRIANGLE DAC_WAVE_TRIANGLE -#if defined(STM32G4) || defined(STM32H7) +#if defined(STM32G4) || defined(STM32H7) || defined (STM32U5) #define DAC_CHIPCONNECT_DISABLE DAC_CHIPCONNECT_EXTERNAL #define DAC_CHIPCONNECT_ENABLE DAC_CHIPCONNECT_INTERNAL #endif -#if defined(STM32L1) || defined(STM32L4) || defined(STM32G0) || defined(STM32H7) || defined(STM32F4) +#if defined(STM32L1) || defined(STM32L4) || defined(STM32G0) || defined(STM32L5) || defined(STM32H7) || defined(STM32F4) || defined(STM32G4) #define HAL_DAC_MSP_INIT_CB_ID HAL_DAC_MSPINIT_CB_ID #define HAL_DAC_MSP_DEINIT_CB_ID HAL_DAC_MSPDEINIT_CB_ID #endif @@ -313,8 +324,13 @@ #endif /* STM32L4 */ #if defined(STM32G0) -#define DMA_REQUEST_DAC1_CHANNEL1 DMA_REQUEST_DAC1_CH1 -#define DMA_REQUEST_DAC1_CHANNEL2 DMA_REQUEST_DAC1_CH2 +#define DMA_REQUEST_DAC1_CHANNEL1 DMA_REQUEST_DAC1_CH1 +#define DMA_REQUEST_DAC1_CHANNEL2 DMA_REQUEST_DAC1_CH2 +#define DMA_REQUEST_TIM16_TRIG_COM DMA_REQUEST_TIM16_COM +#define DMA_REQUEST_TIM17_TRIG_COM DMA_REQUEST_TIM17_COM + +#define LL_DMAMUX_REQ_TIM16_TRIG_COM LL_DMAMUX_REQ_TIM16_COM +#define LL_DMAMUX_REQ_TIM17_TRIG_COM LL_DMAMUX_REQ_TIM17_COM #endif #if defined(STM32H7) @@ -378,7 +394,6 @@ #define DAC_TRIGGER_LP2_OUT DAC_TRIGGER_LPTIM2_OUT #endif /* STM32H7 */ - /** * @} */ @@ -466,15 +481,24 @@ #define OB_BOOT_ENTRY_FORCED_FLASH OB_BOOT_LOCK_ENABLE #endif #if defined(STM32H7) -#define FLASH_FLAG_SNECCE_BANK1RR FLASH_FLAG_SNECCERR_BANK1 -#define FLASH_FLAG_DBECCE_BANK1RR FLASH_FLAG_DBECCERR_BANK1 -#define FLASH_FLAG_STRBER_BANK1R FLASH_FLAG_STRBERR_BANK1 -#define FLASH_FLAG_SNECCE_BANK2RR FLASH_FLAG_SNECCERR_BANK2 -#define FLASH_FLAG_DBECCE_BANK2RR FLASH_FLAG_DBECCERR_BANK2 -#define FLASH_FLAG_STRBER_BANK2R FLASH_FLAG_STRBERR_BANK2 -#define FLASH_FLAG_WDW FLASH_FLAG_WBNE -#define OB_WRP_SECTOR_All OB_WRP_SECTOR_ALL +#define FLASH_FLAG_SNECCE_BANK1RR FLASH_FLAG_SNECCERR_BANK1 +#define FLASH_FLAG_DBECCE_BANK1RR FLASH_FLAG_DBECCERR_BANK1 +#define FLASH_FLAG_STRBER_BANK1R FLASH_FLAG_STRBERR_BANK1 +#define FLASH_FLAG_SNECCE_BANK2RR FLASH_FLAG_SNECCERR_BANK2 +#define FLASH_FLAG_DBECCE_BANK2RR FLASH_FLAG_DBECCERR_BANK2 +#define FLASH_FLAG_STRBER_BANK2R FLASH_FLAG_STRBERR_BANK2 +#define FLASH_FLAG_WDW FLASH_FLAG_WBNE +#define OB_WRP_SECTOR_All OB_WRP_SECTOR_ALL #endif /* STM32H7 */ +#if defined(STM32U5) +#define OB_USER_nRST_STOP OB_USER_NRST_STOP +#define OB_USER_nRST_STDBY OB_USER_NRST_STDBY +#define OB_USER_nRST_SHDW OB_USER_NRST_SHDW +#define OB_USER_nSWBOOT0 OB_USER_NSWBOOT0 +#define OB_USER_nBOOT0 OB_USER_NBOOT0 +#define OB_nBOOT0_RESET OB_NBOOT0_RESET +#define OB_nBOOT0_SET OB_NBOOT0_SET +#endif /* STM32U5 */ /** * @} @@ -517,6 +541,7 @@ #define HAL_SYSCFG_EnableIOAnalogSwitchVDD HAL_SYSCFG_EnableIOSwitchVDD #define HAL_SYSCFG_DisableIOAnalogSwitchVDD HAL_SYSCFG_DisableIOSwitchVDD #endif /* STM32G4 */ + /** * @} */ @@ -591,24 +616,24 @@ #define GPIO_AF1_LPTIM GPIO_AF1_LPTIM1 #define GPIO_AF2_LPTIM GPIO_AF2_LPTIM1 -#if defined(STM32L0) || defined(STM32L4) || defined(STM32F4) || defined(STM32F2) || defined(STM32F7) || defined(STM32G4) || defined(STM32H7) +#if defined(STM32L0) || defined(STM32L4) || defined(STM32F4) || defined(STM32F2) || defined(STM32F7) || defined(STM32G4) || defined(STM32H7) || defined(STM32WB) || defined(STM32U5) #define GPIO_SPEED_LOW GPIO_SPEED_FREQ_LOW #define GPIO_SPEED_MEDIUM GPIO_SPEED_FREQ_MEDIUM #define GPIO_SPEED_FAST GPIO_SPEED_FREQ_HIGH #define GPIO_SPEED_HIGH GPIO_SPEED_FREQ_VERY_HIGH -#endif /* STM32L0 || STM32L4 || STM32F4 || STM32F2 || STM32F7 || STM32G4 || STM32H7*/ +#endif /* STM32L0 || STM32L4 || STM32F4 || STM32F2 || STM32F7 || STM32G4 || STM32H7 || STM32WB || STM32U5*/ #if defined(STM32L1) - #define GPIO_SPEED_VERY_LOW GPIO_SPEED_FREQ_LOW - #define GPIO_SPEED_LOW GPIO_SPEED_FREQ_MEDIUM - #define GPIO_SPEED_MEDIUM GPIO_SPEED_FREQ_HIGH - #define GPIO_SPEED_HIGH GPIO_SPEED_FREQ_VERY_HIGH +#define GPIO_SPEED_VERY_LOW GPIO_SPEED_FREQ_LOW +#define GPIO_SPEED_LOW GPIO_SPEED_FREQ_MEDIUM +#define GPIO_SPEED_MEDIUM GPIO_SPEED_FREQ_HIGH +#define GPIO_SPEED_HIGH GPIO_SPEED_FREQ_VERY_HIGH #endif /* STM32L1 */ #if defined(STM32F0) || defined(STM32F3) || defined(STM32F1) - #define GPIO_SPEED_LOW GPIO_SPEED_FREQ_LOW - #define GPIO_SPEED_MEDIUM GPIO_SPEED_FREQ_MEDIUM - #define GPIO_SPEED_HIGH GPIO_SPEED_FREQ_HIGH +#define GPIO_SPEED_LOW GPIO_SPEED_FREQ_LOW +#define GPIO_SPEED_MEDIUM GPIO_SPEED_FREQ_MEDIUM +#define GPIO_SPEED_HIGH GPIO_SPEED_FREQ_HIGH #endif /* STM32F0 || STM32F3 || STM32F1 */ #define GPIO_AF6_DFSDM GPIO_AF6_DFSDM1 @@ -643,6 +668,10 @@ #define HAL_HRTIM_ExternalEventCounterEnable HAL_HRTIM_ExtEventCounterEnable #define HAL_HRTIM_ExternalEventCounterDisable HAL_HRTIM_ExtEventCounterDisable #define HAL_HRTIM_ExternalEventCounterReset HAL_HRTIM_ExtEventCounterReset +#define HRTIM_TIMEEVENT_A HRTIM_EVENTCOUNTER_A +#define HRTIM_TIMEEVENT_B HRTIM_EVENTCOUNTER_B +#define HRTIM_TIMEEVENTRESETMODE_UNCONDITIONAL HRTIM_EVENTCOUNTER_RSTMODE_UNCONDITIONAL +#define HRTIM_TIMEEVENTRESETMODE_CONDITIONAL HRTIM_EVENTCOUNTER_RSTMODE_CONDITIONAL #endif /* STM32G4 */ #if defined(STM32H7) @@ -765,49 +794,6 @@ #define HRTIM_EVENTSRC_3 (HRTIM_EECR1_EE1SRC_1) #define HRTIM_EVENTSRC_4 (HRTIM_EECR1_EE1SRC_1 | HRTIM_EECR1_EE1SRC_0) -/** @brief Constants defining the events that can be selected to configure the - * set/reset crossbar of a timer output - */ -#define HRTIM_OUTPUTSET_TIMEV_1 (HRTIM_SET1R_TIMEVNT1) -#define HRTIM_OUTPUTSET_TIMEV_2 (HRTIM_SET1R_TIMEVNT2) -#define HRTIM_OUTPUTSET_TIMEV_3 (HRTIM_SET1R_TIMEVNT3) -#define HRTIM_OUTPUTSET_TIMEV_4 (HRTIM_SET1R_TIMEVNT4) -#define HRTIM_OUTPUTSET_TIMEV_5 (HRTIM_SET1R_TIMEVNT5) -#define HRTIM_OUTPUTSET_TIMEV_6 (HRTIM_SET1R_TIMEVNT6) -#define HRTIM_OUTPUTSET_TIMEV_7 (HRTIM_SET1R_TIMEVNT7) -#define HRTIM_OUTPUTSET_TIMEV_8 (HRTIM_SET1R_TIMEVNT8) -#define HRTIM_OUTPUTSET_TIMEV_9 (HRTIM_SET1R_TIMEVNT9) - -#define HRTIM_OUTPUTRESET_TIMEV_1 (HRTIM_RST1R_TIMEVNT1) -#define HRTIM_OUTPUTRESET_TIMEV_2 (HRTIM_RST1R_TIMEVNT2) -#define HRTIM_OUTPUTRESET_TIMEV_3 (HRTIM_RST1R_TIMEVNT3) -#define HRTIM_OUTPUTRESET_TIMEV_4 (HRTIM_RST1R_TIMEVNT4) -#define HRTIM_OUTPUTRESET_TIMEV_5 (HRTIM_RST1R_TIMEVNT5) -#define HRTIM_OUTPUTRESET_TIMEV_6 (HRTIM_RST1R_TIMEVNT6) -#define HRTIM_OUTPUTRESET_TIMEV_7 (HRTIM_RST1R_TIMEVNT7) -#define HRTIM_OUTPUTRESET_TIMEV_8 (HRTIM_RST1R_TIMEVNT8) -#define HRTIM_OUTPUTRESET_TIMEV_9 (HRTIM_RST1R_TIMEVNT9) - -/** @brief Constants defining the event filtering applied to external events - * by a timer - */ -#define HRTIM_TIMEVENTFILTER_NONE (0x00000000U) -#define HRTIM_TIMEVENTFILTER_BLANKINGCMP1 (HRTIM_EEFR1_EE1FLTR_0) -#define HRTIM_TIMEVENTFILTER_BLANKINGCMP2 (HRTIM_EEFR1_EE1FLTR_1) -#define HRTIM_TIMEVENTFILTER_BLANKINGCMP3 (HRTIM_EEFR1_EE1FLTR_1 | HRTIM_EEFR1_EE1FLTR_0) -#define HRTIM_TIMEVENTFILTER_BLANKINGCMP4 (HRTIM_EEFR1_EE1FLTR_2) -#define HRTIM_TIMEVENTFILTER_BLANKINGFLTR1 (HRTIM_EEFR1_EE1FLTR_2 | HRTIM_EEFR1_EE1FLTR_0) -#define HRTIM_TIMEVENTFILTER_BLANKINGFLTR2 (HRTIM_EEFR1_EE1FLTR_2 | HRTIM_EEFR1_EE1FLTR_1) -#define HRTIM_TIMEVENTFILTER_BLANKINGFLTR3 (HRTIM_EEFR1_EE1FLTR_2 | HRTIM_EEFR1_EE1FLTR_1 | HRTIM_EEFR1_EE1FLTR_0) -#define HRTIM_TIMEVENTFILTER_BLANKINGFLTR4 (HRTIM_EEFR1_EE1FLTR_3) -#define HRTIM_TIMEVENTFILTER_BLANKINGFLTR5 (HRTIM_EEFR1_EE1FLTR_3 | HRTIM_EEFR1_EE1FLTR_0) -#define HRTIM_TIMEVENTFILTER_BLANKINGFLTR6 (HRTIM_EEFR1_EE1FLTR_3 | HRTIM_EEFR1_EE1FLTR_1) -#define HRTIM_TIMEVENTFILTER_BLANKINGFLTR7 (HRTIM_EEFR1_EE1FLTR_3 | HRTIM_EEFR1_EE1FLTR_1 | HRTIM_EEFR1_EE1FLTR_0) -#define HRTIM_TIMEVENTFILTER_BLANKINGFLTR8 (HRTIM_EEFR1_EE1FLTR_3 | HRTIM_EEFR1_EE1FLTR_2) -#define HRTIM_TIMEVENTFILTER_WINDOWINGCMP2 (HRTIM_EEFR1_EE1FLTR_3 | HRTIM_EEFR1_EE1FLTR_2 | HRTIM_EEFR1_EE1FLTR_0) -#define HRTIM_TIMEVENTFILTER_WINDOWINGCMP3 (HRTIM_EEFR1_EE1FLTR_3 | HRTIM_EEFR1_EE1FLTR_2 | HRTIM_EEFR1_EE1FLTR_1) -#define HRTIM_TIMEVENTFILTER_WINDOWINGTIM (HRTIM_EEFR1_EE1FLTR_3 | HRTIM_EEFR1_EE1FLTR_2 | HRTIM_EEFR1_EE1FLTR_1 | HRTIM_EEFR1_EE1FLTR_0) - /** @brief Constants defining the DLL calibration periods (in micro seconds) */ #define HRTIM_CALIBRATIONRATE_7300 0x00000000U @@ -888,6 +874,10 @@ #define LPTIM_TRIGSAMPLETIME_4TRANSITION LPTIM_TRIGSAMPLETIME_4TRANSITIONS #define LPTIM_TRIGSAMPLETIME_8TRANSITION LPTIM_TRIGSAMPLETIME_8TRANSITIONS +#if defined(STM32U5) +#define LPTIM_ISR_CC1 LPTIM_ISR_CC1IF +#define LPTIM_ISR_CC2 LPTIM_ISR_CC2IF +#endif /* STM32U5 */ /** * @} */ @@ -955,11 +945,16 @@ #define OPAMP_PGACONNECT_VM0 OPAMP_PGA_CONNECT_INVERTINGINPUT_IO0 #define OPAMP_PGACONNECT_VM1 OPAMP_PGA_CONNECT_INVERTINGINPUT_IO1 -#if defined(STM32L1) || defined(STM32L4) || defined(STM32H7) +#if defined(STM32L1) || defined(STM32L4) || defined(STM32L5) || defined(STM32H7) || defined(STM32G4) #define HAL_OPAMP_MSP_INIT_CB_ID HAL_OPAMP_MSPINIT_CB_ID #define HAL_OPAMP_MSP_DEINIT_CB_ID HAL_OPAMP_MSPDEINIT_CB_ID #endif +#if defined(STM32L4) || defined(STM32L5) +#define OPAMP_POWERMODE_NORMAL OPAMP_POWERMODE_NORMALPOWER +#elif defined(STM32G4) +#define OPAMP_POWERMODE_NORMAL OPAMP_POWERMODE_NORMALSPEED +#endif /** * @} @@ -971,15 +966,15 @@ #define I2S_STANDARD_PHILLIPS I2S_STANDARD_PHILIPS #if defined(STM32H7) - #define I2S_IT_TXE I2S_IT_TXP - #define I2S_IT_RXNE I2S_IT_RXP +#define I2S_IT_TXE I2S_IT_TXP +#define I2S_IT_RXNE I2S_IT_RXP - #define I2S_FLAG_TXE I2S_FLAG_TXP - #define I2S_FLAG_RXNE I2S_FLAG_RXP +#define I2S_FLAG_TXE I2S_FLAG_TXP +#define I2S_FLAG_RXNE I2S_FLAG_RXP #endif #if defined(STM32F7) - #define I2S_CLOCK_SYSCLK I2S_CLOCK_PLL +#define I2S_CLOCK_SYSCLK I2S_CLOCK_PLL #endif /** * @} @@ -1114,16 +1109,16 @@ #if defined(STM32H7) - #define SPI_FLAG_TXE SPI_FLAG_TXP - #define SPI_FLAG_RXNE SPI_FLAG_RXP +#define SPI_FLAG_TXE SPI_FLAG_TXP +#define SPI_FLAG_RXNE SPI_FLAG_RXP - #define SPI_IT_TXE SPI_IT_TXP - #define SPI_IT_RXNE SPI_IT_RXP +#define SPI_IT_TXE SPI_IT_TXP +#define SPI_IT_RXNE SPI_IT_RXP - #define SPI_FRLVL_EMPTY SPI_RX_FIFO_0PACKET - #define SPI_FRLVL_QUARTER_FULL SPI_RX_FIFO_1PACKET - #define SPI_FRLVL_HALF_FULL SPI_RX_FIFO_2PACKET - #define SPI_FRLVL_FULL SPI_RX_FIFO_3PACKET +#define SPI_FRLVL_EMPTY SPI_RX_FIFO_0PACKET +#define SPI_FRLVL_QUARTER_FULL SPI_RX_FIFO_1PACKET +#define SPI_FRLVL_HALF_FULL SPI_RX_FIFO_2PACKET +#define SPI_FRLVL_FULL SPI_RX_FIFO_3PACKET #endif /* STM32H7 */ @@ -1409,6 +1404,20 @@ */ #endif /* STM32L4 || STM32F7 || STM32F4 || STM32H7 */ +#if defined(STM32L4) || defined(STM32F7) || defined(STM32F427xx) || defined(STM32F437xx) \ + || defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F469xx) || defined(STM32F479xx) \ + || defined(STM32H7) || defined(STM32U5) +/** @defgroup DMA2D_Aliases DMA2D API Aliases + * @{ + */ +#define HAL_DMA2D_DisableCLUT HAL_DMA2D_CLUTLoading_Abort /*!< Aliased to HAL_DMA2D_CLUTLoading_Abort + for compatibility with legacy code */ +/** + * @} + */ + +#endif /* STM32L4 || STM32F7 || STM32F4 || STM32H7 || STM32U5 */ + /** @defgroup HAL_PPP_Aliased_Defines HAL PPP Aliased Defines maintained for legacy purpose * @{ */ @@ -1427,6 +1436,29 @@ * @} */ +/** @defgroup HAL_DCACHE_Aliased_Functions HAL DCACHE Aliased Functions maintained for legacy purpose + * @{ + */ + +#if defined(STM32U5) +#define HAL_DCACHE_CleanInvalidateByAddr HAL_DCACHE_CleanInvalidByAddr +#define HAL_DCACHE_CleanInvalidateByAddr_IT HAL_DCACHE_CleanInvalidByAddr_IT +#endif /* STM32U5 */ + +/** + * @} + */ + +#if !defined(STM32F2) +/** @defgroup HASH_alias HASH API alias + * @{ + */ +#define HAL_HASHEx_IRQHandler HAL_HASH_IRQHandler /*!< Redirection for compatibility with legacy code */ +/** + * + * @} + */ +#endif /* STM32F2 */ /** @defgroup HAL_HASH_Aliased_Functions HAL HASH Aliased Functions maintained for legacy purpose * @{ */ @@ -1450,7 +1482,7 @@ #define HASH_HMACKeyType_ShortKey HASH_HMAC_KEYTYPE_SHORTKEY #define HASH_HMACKeyType_LongKey HASH_HMAC_KEYTYPE_LONGKEY -#if defined(STM32L4) || defined(STM32F4) || defined(STM32F7) || defined(STM32H7) +#if defined(STM32L4) || defined(STM32L5) || defined(STM32F2) || defined(STM32F4) || defined(STM32F7) || defined(STM32H7) #define HAL_HASH_MD5_Accumulate HAL_HASH_MD5_Accmlt #define HAL_HASH_MD5_Accumulate_End HAL_HASH_MD5_Accmlt_End @@ -1472,7 +1504,7 @@ #define HAL_HASHEx_SHA256_Accumulate_IT HAL_HASHEx_SHA256_Accmlt_IT #define HAL_HASHEx_SHA256_Accumulate_End_IT HAL_HASHEx_SHA256_Accmlt_End_IT -#endif /* STM32L4 || STM32F4 || STM32F7 || STM32H7 */ +#endif /* STM32L4 || STM32L5 || STM32F2 || STM32F4 || STM32F7 || STM32H7 */ /** * @} */ @@ -1486,7 +1518,8 @@ #define HAL_DisableDBGStopMode HAL_DBGMCU_DisableDBGStopMode #define HAL_EnableDBGStandbyMode HAL_DBGMCU_EnableDBGStandbyMode #define HAL_DisableDBGStandbyMode HAL_DBGMCU_DisableDBGStandbyMode -#define HAL_DBG_LowPowerConfig(Periph, cmd) (((cmd)==ENABLE)? HAL_DBGMCU_DBG_EnableLowPowerConfig(Periph) : HAL_DBGMCU_DBG_DisableLowPowerConfig(Periph)) +#define HAL_DBG_LowPowerConfig(Periph, cmd) (((cmd\ + )==ENABLE)? HAL_DBGMCU_DBG_EnableLowPowerConfig(Periph) : HAL_DBGMCU_DBG_DisableLowPowerConfig(Periph)) #define HAL_VREFINT_OutputSelect HAL_SYSCFG_VREFINT_OutputSelect #define HAL_Lock_Cmd(cmd) (((cmd)==ENABLE) ? HAL_SYSCFG_Enable_Lock_VREFINT() : HAL_SYSCFG_Disable_Lock_VREFINT()) #if defined(STM32L0) @@ -1494,7 +1527,8 @@ #define HAL_VREFINT_Cmd(cmd) (((cmd)==ENABLE)? HAL_SYSCFG_EnableVREFINT() : HAL_SYSCFG_DisableVREFINT()) #endif #define HAL_ADC_EnableBuffer_Cmd(cmd) (((cmd)==ENABLE) ? HAL_ADCEx_EnableVREFINT() : HAL_ADCEx_DisableVREFINT()) -#define HAL_ADC_EnableBufferSensor_Cmd(cmd) (((cmd)==ENABLE) ? HAL_ADCEx_EnableVREFINTTempSensor() : HAL_ADCEx_DisableVREFINTTempSensor()) +#define HAL_ADC_EnableBufferSensor_Cmd(cmd) (((cmd\ + )==ENABLE) ? HAL_ADCEx_EnableVREFINTTempSensor() : HAL_ADCEx_DisableVREFINTTempSensor()) #if defined(STM32H7A3xx) || defined(STM32H7B3xx) || defined(STM32H7B0xx) || defined(STM32H7A3xxQ) || defined(STM32H7B3xxQ) || defined(STM32H7B0xxQ) #define HAL_EnableSRDomainDBGStopMode HAL_EnableDomain3DBGStopMode #define HAL_DisableSRDomainDBGStopMode HAL_DisableDomain3DBGStopMode @@ -1517,9 +1551,9 @@ #define HAL_DATA_EEPROMEx_Erase HAL_FLASHEx_DATAEEPROM_Erase #define HAL_DATA_EEPROMEx_Program HAL_FLASHEx_DATAEEPROM_Program - /** +/** * @} - */ + */ /** @defgroup HAL_I2C_Aliased_Functions HAL I2C Aliased Functions maintained for legacy purpose * @{ @@ -1529,20 +1563,21 @@ #define HAL_FMPI2CEx_AnalogFilter_Config HAL_FMPI2CEx_ConfigAnalogFilter #define HAL_FMPI2CEx_DigitalFilter_Config HAL_FMPI2CEx_ConfigDigitalFilter -#define HAL_I2CFastModePlusConfig(SYSCFG_I2CFastModePlus, cmd) (((cmd)==ENABLE)? HAL_I2CEx_EnableFastModePlus(SYSCFG_I2CFastModePlus): HAL_I2CEx_DisableFastModePlus(SYSCFG_I2CFastModePlus)) +#define HAL_I2CFastModePlusConfig(SYSCFG_I2CFastModePlus, cmd) (((cmd\ + )==ENABLE)? HAL_I2CEx_EnableFastModePlus(SYSCFG_I2CFastModePlus): HAL_I2CEx_DisableFastModePlus(SYSCFG_I2CFastModePlus)) -#if defined(STM32H7) || defined(STM32WB) || defined(STM32G0) || defined(STM32F0) || defined(STM32F1) || defined(STM32F2) || defined(STM32F3) || defined(STM32F4) || defined(STM32F7) || defined(STM32L0) || defined(STM32L4) || defined(STM32G4) +#if defined(STM32H7) || defined(STM32WB) || defined(STM32G0) || defined(STM32F0) || defined(STM32F1) || defined(STM32F2) || defined(STM32F3) || defined(STM32F4) || defined(STM32F7) || defined(STM32L0) || defined(STM32L4) || defined(STM32L5) || defined(STM32G4) || defined(STM32L1) #define HAL_I2C_Master_Sequential_Transmit_IT HAL_I2C_Master_Seq_Transmit_IT #define HAL_I2C_Master_Sequential_Receive_IT HAL_I2C_Master_Seq_Receive_IT #define HAL_I2C_Slave_Sequential_Transmit_IT HAL_I2C_Slave_Seq_Transmit_IT #define HAL_I2C_Slave_Sequential_Receive_IT HAL_I2C_Slave_Seq_Receive_IT -#endif /* STM32H7 || STM32WB || STM32G0 || STM32F0 || STM32F1 || STM32F2 || STM32F3 || STM32F4 || STM32F7 || STM32L0 || STM32L4 || STM32G4 */ -#if defined(STM32H7) || defined(STM32WB) || defined(STM32G0) || defined(STM32F4) || defined(STM32F7) || defined(STM32L0) || defined(STM32L4) || defined(STM32G4) +#endif /* STM32H7 || STM32WB || STM32G0 || STM32F0 || STM32F1 || STM32F2 || STM32F3 || STM32F4 || STM32F7 || STM32L0 || STM32L4 || STM32L5 || STM32G4 || STM32L1 */ +#if defined(STM32H7) || defined(STM32WB) || defined(STM32G0) || defined(STM32F4) || defined(STM32F7) || defined(STM32L0) || defined(STM32L4) || defined(STM32L5) || defined(STM32G4)|| defined(STM32L1) #define HAL_I2C_Master_Sequential_Transmit_DMA HAL_I2C_Master_Seq_Transmit_DMA #define HAL_I2C_Master_Sequential_Receive_DMA HAL_I2C_Master_Seq_Receive_DMA #define HAL_I2C_Slave_Sequential_Transmit_DMA HAL_I2C_Slave_Seq_Transmit_DMA #define HAL_I2C_Slave_Sequential_Receive_DMA HAL_I2C_Slave_Seq_Receive_DMA -#endif /* STM32H7 || STM32WB || STM32G0 || STM32F4 || STM32F7 || STM32L0 || STM32L4 || STM32G4 */ +#endif /* STM32H7 || STM32WB || STM32G0 || STM32F4 || STM32F7 || STM32L0 || STM32L4 || STM32L5 || STM32G4 || STM32L1 */ #if defined(STM32F4) #define HAL_FMPI2C_Master_Sequential_Transmit_IT HAL_FMPI2C_Master_Seq_Transmit_IT @@ -1554,19 +1589,19 @@ #define HAL_FMPI2C_Slave_Sequential_Transmit_DMA HAL_FMPI2C_Slave_Seq_Transmit_DMA #define HAL_FMPI2C_Slave_Sequential_Receive_DMA HAL_FMPI2C_Slave_Seq_Receive_DMA #endif /* STM32F4 */ - /** +/** * @} - */ + */ /** @defgroup HAL_PWR_Aliased HAL PWR Aliased maintained for legacy purpose * @{ */ #if defined(STM32G0) -#define HAL_PWR_ConfigPVD HAL_PWREx_ConfigPVD -#define HAL_PWR_EnablePVD HAL_PWREx_EnablePVD -#define HAL_PWR_DisablePVD HAL_PWREx_DisablePVD -#define HAL_PWR_PVD_IRQHandler HAL_PWREx_PVD_IRQHandler +#define HAL_PWR_ConfigPVD HAL_PWREx_ConfigPVD +#define HAL_PWR_EnablePVD HAL_PWREx_EnablePVD +#define HAL_PWR_DisablePVD HAL_PWREx_DisablePVD +#define HAL_PWR_PVD_IRQHandler HAL_PWREx_PVD_IRQHandler #endif #define HAL_PWR_PVDConfig HAL_PWR_ConfigPVD #define HAL_PWR_DisableBkUpReg HAL_PWREx_DisableBkUpReg @@ -1611,9 +1646,9 @@ #define PWR_MODE_EVT PWR_PVD_MODE_NORMAL - /** +/** * @} - */ + */ /** @defgroup HAL_SMBUS_Aliased_Functions HAL SMBUS Aliased Functions maintained for legacy purpose * @{ @@ -1862,15 +1897,15 @@ #define __HAL_FREEZE_RTC_DBGMCU __HAL_DBGMCU_FREEZE_RTC #define __HAL_UNFREEZE_RTC_DBGMCU __HAL_DBGMCU_UNFREEZE_RTC #if defined(STM32H7) - #define __HAL_FREEZE_WWDG_DBGMCU __HAL_DBGMCU_FREEZE_WWDG1 - #define __HAL_UNFREEZE_WWDG_DBGMCU __HAL_DBGMCU_UnFreeze_WWDG1 - #define __HAL_FREEZE_IWDG_DBGMCU __HAL_DBGMCU_FREEZE_IWDG1 - #define __HAL_UNFREEZE_IWDG_DBGMCU __HAL_DBGMCU_UnFreeze_IWDG1 +#define __HAL_FREEZE_WWDG_DBGMCU __HAL_DBGMCU_FREEZE_WWDG1 +#define __HAL_UNFREEZE_WWDG_DBGMCU __HAL_DBGMCU_UnFreeze_WWDG1 +#define __HAL_FREEZE_IWDG_DBGMCU __HAL_DBGMCU_FREEZE_IWDG1 +#define __HAL_UNFREEZE_IWDG_DBGMCU __HAL_DBGMCU_UnFreeze_IWDG1 #else - #define __HAL_FREEZE_WWDG_DBGMCU __HAL_DBGMCU_FREEZE_WWDG - #define __HAL_UNFREEZE_WWDG_DBGMCU __HAL_DBGMCU_UNFREEZE_WWDG - #define __HAL_FREEZE_IWDG_DBGMCU __HAL_DBGMCU_FREEZE_IWDG - #define __HAL_UNFREEZE_IWDG_DBGMCU __HAL_DBGMCU_UNFREEZE_IWDG +#define __HAL_FREEZE_WWDG_DBGMCU __HAL_DBGMCU_FREEZE_WWDG +#define __HAL_UNFREEZE_WWDG_DBGMCU __HAL_DBGMCU_UNFREEZE_WWDG +#define __HAL_FREEZE_IWDG_DBGMCU __HAL_DBGMCU_FREEZE_IWDG +#define __HAL_UNFREEZE_IWDG_DBGMCU __HAL_DBGMCU_UNFREEZE_IWDG #endif /* STM32H7 */ #define __HAL_FREEZE_I2C1_TIMEOUT_DBGMCU __HAL_DBGMCU_FREEZE_I2C1_TIMEOUT #define __HAL_UNFREEZE_I2C1_TIMEOUT_DBGMCU __HAL_DBGMCU_UNFREEZE_I2C1_TIMEOUT @@ -2081,8 +2116,8 @@ */ #define IS_DAC_WAVE(WAVE) (((WAVE) == DAC_WAVE_NONE) || \ - ((WAVE) == DAC_WAVE_NOISE)|| \ - ((WAVE) == DAC_WAVE_TRIANGLE)) + ((WAVE) == DAC_WAVE_NOISE)|| \ + ((WAVE) == DAC_WAVE_TRIANGLE)) /** * @} @@ -2138,7 +2173,7 @@ #define IS_I2S_INSTANCE_EXT IS_I2S_ALL_INSTANCE_EXT #if defined(STM32H7) - #define __HAL_I2S_CLEAR_FREFLAG __HAL_I2S_CLEAR_TIFREFLAG +#define __HAL_I2S_CLEAR_FREFLAG __HAL_I2S_CLEAR_TIFREFLAG #endif /** @@ -2275,7 +2310,8 @@ #define RCC_StopWakeUpClock_HSI RCC_STOP_WAKEUPCLOCK_HSI #define HAL_RCC_CCSCallback HAL_RCC_CSSCallback -#define HAL_RC48_EnableBuffer_Cmd(cmd) (((cmd)==ENABLE) ? HAL_RCCEx_EnableHSI48_VREFINT() : HAL_RCCEx_DisableHSI48_VREFINT()) +#define HAL_RC48_EnableBuffer_Cmd(cmd) (((cmd\ + )==ENABLE) ? HAL_RCCEx_EnableHSI48_VREFINT() : HAL_RCCEx_DisableHSI48_VREFINT()) #define __ADC_CLK_DISABLE __HAL_RCC_ADC_CLK_DISABLE #define __ADC_CLK_ENABLE __HAL_RCC_ADC_CLK_ENABLE @@ -3243,9 +3279,8 @@ #define RCC_MCOSOURCE_PLLCLK_NODIV RCC_MCO1SOURCE_PLLCLK #define RCC_MCOSOURCE_PLLCLK_DIV2 RCC_MCO1SOURCE_PLLCLK_DIV2 -#if defined(STM32L4) +#if defined(STM32L4) || defined(STM32WB) || defined(STM32G0) || defined(STM32G4) || defined(STM32L5) || defined(STM32WL) #define RCC_RTCCLKSOURCE_NO_CLK RCC_RTCCLKSOURCE_NONE -#elif defined(STM32WB) || defined(STM32G0) || defined(STM32G4) #else #define RCC_RTCCLKSOURCE_NONE RCC_RTCCLKSOURCE_NO_CLK #endif @@ -3356,7 +3391,20 @@ #define RCC_DFSDM1CLKSOURCE_APB2 RCC_DFSDM1CLKSOURCE_PCLK2 #define RCC_DFSDM2CLKSOURCE_APB2 RCC_DFSDM2CLKSOURCE_PCLK2 #define RCC_FMPI2C1CLKSOURCE_APB RCC_FMPI2C1CLKSOURCE_PCLK1 - +#if defined(STM32U5) +#define MSIKPLLModeSEL RCC_MSIKPLL_MODE_SEL +#define MSISPLLModeSEL RCC_MSISPLL_MODE_SEL +#define __HAL_RCC_AHB21_CLK_DISABLE __HAL_RCC_AHB2_1_CLK_DISABLE +#define __HAL_RCC_AHB22_CLK_DISABLE __HAL_RCC_AHB2_2_CLK_DISABLE +#define __HAL_RCC_AHB1_CLK_Disable_Clear __HAL_RCC_AHB1_CLK_ENABLE +#define __HAL_RCC_AHB21_CLK_Disable_Clear __HAL_RCC_AHB2_1_CLK_ENABLE +#define __HAL_RCC_AHB22_CLK_Disable_Clear __HAL_RCC_AHB2_2_CLK_ENABLE +#define __HAL_RCC_AHB3_CLK_Disable_Clear __HAL_RCC_AHB3_CLK_ENABLE +#define __HAL_RCC_APB1_CLK_Disable_Clear __HAL_RCC_APB1_CLK_ENABLE +#define __HAL_RCC_APB2_CLK_Disable_Clear __HAL_RCC_APB2_CLK_ENABLE +#define __HAL_RCC_APB3_CLK_Disable_Clear __HAL_RCC_APB3_CLK_ENABLE +#define IS_RCC_MSIPLLModeSelection IS_RCC_MSIPLLMODE_SELECT +#endif /** * @} */ @@ -3373,7 +3421,7 @@ /** @defgroup HAL_RTC_Aliased_Macros HAL RTC Aliased Macros maintained for legacy purpose * @{ */ -#if defined (STM32G0) || defined (STM32L412xx) || defined (STM32L422xx) || defined (STM32G4) +#if defined (STM32G0) || defined (STM32L5) || defined (STM32L412xx) || defined (STM32L422xx) || defined (STM32L4P5xx) || defined (STM32L4Q5xx) || defined (STM32G4) || defined (STM32WL) || defined (STM32U5) #else #define __HAL_RTC_CLEAR_FLAG __HAL_RTC_EXTI_CLEAR_FLAG #endif @@ -3393,19 +3441,19 @@ #else #define __HAL_RTC_EXTI_CLEAR_FLAG(__EXTI_LINE__) (((__EXTI_LINE__) == RTC_EXTI_LINE_ALARM_EVENT) ? __HAL_RTC_ALARM_EXTI_CLEAR_FLAG() : \ (((__EXTI_LINE__) == RTC_EXTI_LINE_WAKEUPTIMER_EVENT) ? __HAL_RTC_WAKEUPTIMER_EXTI_CLEAR_FLAG() : \ - __HAL_RTC_TAMPER_TIMESTAMP_EXTI_CLEAR_FLAG())) + __HAL_RTC_TAMPER_TIMESTAMP_EXTI_CLEAR_FLAG())) #define __HAL_RTC_EXTI_ENABLE_IT(__EXTI_LINE__) (((__EXTI_LINE__) == RTC_EXTI_LINE_ALARM_EVENT) ? __HAL_RTC_ALARM_EXTI_ENABLE_IT() : \ - (((__EXTI_LINE__) == RTC_EXTI_LINE_WAKEUPTIMER_EVENT) ? __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_IT() : \ - __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_IT())) + (((__EXTI_LINE__) == RTC_EXTI_LINE_WAKEUPTIMER_EVENT) ? __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_IT() : \ + __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_IT())) #define __HAL_RTC_EXTI_DISABLE_IT(__EXTI_LINE__) (((__EXTI_LINE__) == RTC_EXTI_LINE_ALARM_EVENT) ? __HAL_RTC_ALARM_EXTI_DISABLE_IT() : \ - (((__EXTI_LINE__) == RTC_EXTI_LINE_WAKEUPTIMER_EVENT) ? __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_IT() : \ - __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_IT())) + (((__EXTI_LINE__) == RTC_EXTI_LINE_WAKEUPTIMER_EVENT) ? __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_IT() : \ + __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_IT())) #define __HAL_RTC_EXTI_GET_FLAG(__EXTI_LINE__) (((__EXTI_LINE__) == RTC_EXTI_LINE_ALARM_EVENT) ? __HAL_RTC_ALARM_EXTI_GET_FLAG() : \ - (((__EXTI_LINE__) == RTC_EXTI_LINE_WAKEUPTIMER_EVENT) ? __HAL_RTC_WAKEUPTIMER_EXTI_GET_FLAG() : \ - __HAL_RTC_TAMPER_TIMESTAMP_EXTI_GET_FLAG())) + (((__EXTI_LINE__) == RTC_EXTI_LINE_WAKEUPTIMER_EVENT) ? __HAL_RTC_WAKEUPTIMER_EXTI_GET_FLAG() : \ + __HAL_RTC_TAMPER_TIMESTAMP_EXTI_GET_FLAG())) #define __HAL_RTC_EXTI_GENERATE_SWIT(__EXTI_LINE__) (((__EXTI_LINE__) == RTC_EXTI_LINE_ALARM_EVENT) ? __HAL_RTC_ALARM_EXTI_GENERATE_SWIT() : \ - (((__EXTI_LINE__) == RTC_EXTI_LINE_WAKEUPTIMER_EVENT) ? __HAL_RTC_WAKEUPTIMER_EXTI_GENERATE_SWIT() : \ - __HAL_RTC_TAMPER_TIMESTAMP_EXTI_GENERATE_SWIT())) + (((__EXTI_LINE__) == RTC_EXTI_LINE_WAKEUPTIMER_EVENT) ? __HAL_RTC_WAKEUPTIMER_EXTI_GENERATE_SWIT() : \ + __HAL_RTC_TAMPER_TIMESTAMP_EXTI_GENERATE_SWIT())) #endif /* STM32F1 */ #define IS_ALARM IS_RTC_ALARM @@ -3430,13 +3478,22 @@ * @} */ -/** @defgroup HAL_SD_Aliased_Macros HAL SD Aliased Macros maintained for legacy purpose +/** @defgroup HAL_SD_Aliased_Macros HAL SD/MMC Aliased Macros maintained for legacy purpose * @{ */ #define SD_OCR_CID_CSD_OVERWRIETE SD_OCR_CID_CSD_OVERWRITE #define SD_CMD_SD_APP_STAUS SD_CMD_SD_APP_STATUS +#if !defined(STM32F1) && !defined(STM32F2) && !defined(STM32F4) && !defined(STM32F7) && !defined(STM32L1) +#define eMMC_HIGH_VOLTAGE_RANGE EMMC_HIGH_VOLTAGE_RANGE +#define eMMC_DUAL_VOLTAGE_RANGE EMMC_DUAL_VOLTAGE_RANGE +#define eMMC_LOW_VOLTAGE_RANGE EMMC_LOW_VOLTAGE_RANGE + +#define SDMMC_NSpeed_CLK_DIV SDMMC_NSPEED_CLK_DIV +#define SDMMC_HSpeed_CLK_DIV SDMMC_HSPEED_CLK_DIV +#endif + #if defined(STM32F4) || defined(STM32F2) #define SD_SDMMC_DISABLED SD_SDIO_DISABLED #define SD_SDMMC_FUNCTION_BUSY SD_SDIO_FUNCTION_BUSY @@ -3481,9 +3538,9 @@ #define __HAL_SD_SDIO_CLEAR_FLAG __HAL_SD_SDMMC_CLEAR_FLAG #define __HAL_SD_SDIO_GET_IT __HAL_SD_SDMMC_GET_IT #define __HAL_SD_SDIO_CLEAR_IT __HAL_SD_SDMMC_CLEAR_IT -#define SDIO_STATIC_FLAGS SDMMC_STATIC_FLAGS -#define SDIO_CMD0TIMEOUT SDMMC_CMD0TIMEOUT -#define SD_SDIO_SEND_IF_COND SD_SDMMC_SEND_IF_COND +#define SDIO_STATIC_FLAGS SDMMC_STATIC_FLAGS +#define SDIO_CMD0TIMEOUT SDMMC_CMD0TIMEOUT +#define SD_SDIO_SEND_IF_COND SD_SDMMC_SEND_IF_COND /* alias CMSIS for compatibilities */ #define SDIO_IRQn SDMMC1_IRQn #define SDIO_IRQHandler SDMMC1_IRQHandler @@ -3496,7 +3553,7 @@ #define HAL_SD_CardStateTypedef HAL_SD_CardStateTypeDef #endif -#if defined(STM32H7) +#if defined(STM32H7) || defined(STM32L5) #define HAL_MMCEx_Read_DMADoubleBuffer0CpltCallback HAL_MMCEx_Read_DMADoubleBuf0CpltCallback #define HAL_MMCEx_Read_DMADoubleBuffer1CpltCallback HAL_MMCEx_Read_DMADoubleBuf1CpltCallback #define HAL_MMCEx_Write_DMADoubleBuffer0CpltCallback HAL_MMCEx_Write_DMADoubleBuf0CpltCallback @@ -3589,6 +3646,13 @@ #define __HAL_USART_GETCLOCKSOURCE USART_GETCLOCKSOURCE #define __USART_GETCLOCKSOURCE USART_GETCLOCKSOURCE +#if defined(STM32F0) || defined(STM32F3) || defined(STM32F7) +#define USART_OVERSAMPLING_16 0x00000000U +#define USART_OVERSAMPLING_8 USART_CR1_OVER8 + +#define IS_USART_OVERSAMPLING(__SAMPLING__) (((__SAMPLING__) == USART_OVERSAMPLING_16) || \ + ((__SAMPLING__) == USART_OVERSAMPLING_8)) +#endif /* STM32F0 || STM32F3 || STM32F7 */ /** * @} */ @@ -3751,9 +3815,9 @@ /** @defgroup HAL_QSPI_Aliased_Macros HAL QSPI Aliased Macros maintained for legacy purpose * @{ */ -#if defined (STM32L4) +#if defined (STM32L4) || defined (STM32F4) || defined (STM32F7) || defined(STM32H7) #define HAL_QPSI_TIMEOUT_DEFAULT_VALUE HAL_QSPI_TIMEOUT_DEFAULT_VALUE -#endif +#endif /* STM32L4 || STM32F4 || STM32F7 */ /** * @} */ diff --git a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_def.h b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_def.h index 8004cb6..ddf6398 100644 --- a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_def.h +++ b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_def.h @@ -107,7 +107,14 @@ typedef enum }while (0U) #endif /* USE_RTOS */ -#if defined ( __GNUC__ ) && !defined (__CC_ARM) /* GNU Compiler */ +#if defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) /* ARM Compiler V6 */ + #ifndef __weak + #define __weak __attribute__((weak)) + #endif + #ifndef __packed + #define __packed __attribute__((packed)) + #endif +#elif defined ( __GNUC__ ) && !defined (__CC_ARM) /* GNU Compiler */ #ifndef __weak #define __weak __attribute__((weak)) #endif /* __weak */ @@ -118,7 +125,14 @@ typedef enum /* Macro to get variable aligned on 4-bytes, for __ICCARM__ the directive "#pragma data_alignment=4" must be used instead */ -#if defined ( __GNUC__ ) && !defined (__CC_ARM) /* GNU Compiler */ +#if defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) /* ARM Compiler V6 */ + #ifndef __ALIGN_BEGIN + #define __ALIGN_BEGIN + #endif + #ifndef __ALIGN_END + #define __ALIGN_END __attribute__ ((aligned (4))) + #endif +#elif defined ( __GNUC__ ) && !defined (__CC_ARM) /* GNU Compiler */ #ifndef __ALIGN_END #define __ALIGN_END __attribute__ ((aligned (4))) #endif /* __ALIGN_END */ @@ -130,7 +144,7 @@ typedef enum #define __ALIGN_END #endif /* __ALIGN_END */ #ifndef __ALIGN_BEGIN - #if defined (__CC_ARM) /* ARM Compiler */ + #if defined (__CC_ARM) /* ARM Compiler V5*/ #define __ALIGN_BEGIN __align(4) #elif defined (__ICCARM__) /* IAR Compiler */ #define __ALIGN_BEGIN @@ -142,9 +156,9 @@ typedef enum /** * @brief __RAM_FUNC definition */ -#if defined ( __CC_ARM ) -/* ARM Compiler - ------------ +#if defined ( __CC_ARM ) || (defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)) +/* ARM Compiler V4/V5 and V6 + -------------------------- RAM functions are defined using the toolchain options. Functions that are executed in RAM should reside in a separate source module. Using the 'Options for File' dialog you can simply change the 'Code / Const' @@ -174,9 +188,9 @@ typedef enum /** * @brief __NOINLINE definition */ -#if defined ( __CC_ARM ) || defined ( __GNUC__ ) -/* ARM & GNUCompiler - ---------------- +#if defined ( __CC_ARM ) || (defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)) || defined ( __GNUC__ ) +/* ARM V4/V5 and V6 & GNU Compiler + ------------------------------- */ #define __NOINLINE __attribute__ ( (noinline) ) diff --git a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_exti.h b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_exti.h index c1e02a4..15f30fb 100644 --- a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_exti.h +++ b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_exti.h @@ -243,21 +243,19 @@ typedef struct /** @defgroup EXTI_Private_Macros EXTI Private Macros * @{ */ -#define IS_EXTI_LINE(__LINE__) ((((__LINE__) & ~(EXTI_PROPERTY_MASK | EXTI_PIN_MASK)) == 0x00u) && \ - ((((__LINE__) & EXTI_PROPERTY_MASK) == EXTI_CONFIG) || \ - (((__LINE__) & EXTI_PROPERTY_MASK) == EXTI_GPIO)) && \ - (((__LINE__) & EXTI_PIN_MASK) < EXTI_LINE_NB)) +#define IS_EXTI_LINE(__EXTI_LINE__) ((((__EXTI_LINE__) & ~(EXTI_PROPERTY_MASK | EXTI_PIN_MASK)) == 0x00u) && \ + ((((__EXTI_LINE__) & EXTI_PROPERTY_MASK) == EXTI_CONFIG) || \ + (((__EXTI_LINE__) & EXTI_PROPERTY_MASK) == EXTI_GPIO)) && \ + (((__EXTI_LINE__) & EXTI_PIN_MASK) < EXTI_LINE_NB)) -#define IS_EXTI_MODE(__LINE__) ((((__LINE__) & EXTI_MODE_MASK) != 0x00u) && \ - (((__LINE__) & ~EXTI_MODE_MASK) == 0x00u)) +#define IS_EXTI_MODE(__EXTI_LINE__) ((((__EXTI_LINE__) & EXTI_MODE_MASK) != 0x00u) && \ + (((__EXTI_LINE__) & ~EXTI_MODE_MASK) == 0x00u)) -#define IS_EXTI_TRIGGER(__LINE__) (((__LINE__) & ~EXTI_TRIGGER_MASK) == 0x00u) +#define IS_EXTI_TRIGGER(__EXTI_LINE__) (((__EXTI_LINE__) & ~EXTI_TRIGGER_MASK) == 0x00u) -#define IS_EXTI_PENDING_EDGE(__LINE__) (((__LINE__) == EXTI_TRIGGER_FALLING) || \ - ((__LINE__) == EXTI_TRIGGER_RISING) || \ - ((__LINE__) == EXTI_TRIGGER_RISING_FALLING)) +#define IS_EXTI_PENDING_EDGE(__EXTI_LINE__) ((__EXTI_LINE__) == EXTI_TRIGGER_RISING_FALLING) -#define IS_EXTI_CONFIG_LINE(__LINE__) (((__LINE__) & EXTI_CONFIG) != 0x00u) +#define IS_EXTI_CONFIG_LINE(__EXTI_LINE__) (((__EXTI_LINE__) & EXTI_CONFIG) != 0x00u) #if !defined (GPIOD) #define IS_EXTI_GPIO_PORT(__PORT__) (((__PORT__) == EXTI_GPIOA) || \ diff --git a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_gpio.h b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_gpio.h index 34d393a..729c9e0 100644 --- a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_gpio.h +++ b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_gpio.h @@ -107,30 +107,30 @@ typedef enum */ /** @defgroup GPIO_mode_define GPIO mode define - * @brief GPIO Configuration Mode - * Elements values convention: 0xX0yz00YZ - * - X : GPIO mode or EXTI Mode - * - y : External IT or Event trigger detection - * - z : IO configuration on External IT or Event - * - Y : Output type (Push Pull or Open Drain) - * - Z : IO Direction mode (Input, Output, Alternate or Analog) + * @brief GPIO Configuration Mode + * Elements values convention: 0x00WX00YZ + * - W : EXTI trigger detection on 3 bits + * - X : EXTI mode (IT or Event) on 2 bits + * - Y : Output type (Push Pull or Open Drain) on 1 bit + * - Z : GPIO mode (Input, Output, Alternate or Analog) on 2 bits * @{ */ -#define GPIO_MODE_INPUT 0x00000000U /*!< Input Floating Mode */ -#define GPIO_MODE_OUTPUT_PP 0x00000001U /*!< Output Push Pull Mode */ -#define GPIO_MODE_OUTPUT_OD 0x00000011U /*!< Output Open Drain Mode */ -#define GPIO_MODE_AF_PP 0x00000002U /*!< Alternate Function Push Pull Mode */ -#define GPIO_MODE_AF_OD 0x00000012U /*!< Alternate Function Open Drain Mode */ +#define GPIO_MODE_INPUT MODE_INPUT /*!< Input Floating Mode */ +#define GPIO_MODE_OUTPUT_PP (MODE_OUTPUT | OUTPUT_PP) /*!< Output Push Pull Mode */ +#define GPIO_MODE_OUTPUT_OD (MODE_OUTPUT | OUTPUT_OD) /*!< Output Open Drain Mode */ +#define GPIO_MODE_AF_PP (MODE_AF | OUTPUT_PP) /*!< Alternate Function Push Pull Mode */ +#define GPIO_MODE_AF_OD (MODE_AF | OUTPUT_OD) /*!< Alternate Function Open Drain Mode */ -#define GPIO_MODE_ANALOG 0x00000003U /*!< Analog Mode */ +#define GPIO_MODE_ANALOG MODE_ANALOG /*!< Analog Mode */ -#define GPIO_MODE_IT_RISING 0x10110000U /*!< External Interrupt Mode with Rising edge trigger detection */ -#define GPIO_MODE_IT_FALLING 0x10210000U /*!< External Interrupt Mode with Falling edge trigger detection */ -#define GPIO_MODE_IT_RISING_FALLING 0x10310000U /*!< External Interrupt Mode with Rising/Falling edge trigger detection */ +#define GPIO_MODE_IT_RISING (MODE_INPUT | EXTI_IT | TRIGGER_RISING) /*!< External Interrupt Mode with Rising edge trigger detection */ +#define GPIO_MODE_IT_FALLING (MODE_INPUT | EXTI_IT | TRIGGER_FALLING) /*!< External Interrupt Mode with Falling edge trigger detection */ +#define GPIO_MODE_IT_RISING_FALLING (MODE_INPUT | EXTI_IT | TRIGGER_RISING | TRIGGER_FALLING) /*!< External Interrupt Mode with Rising/Falling edge trigger detection */ -#define GPIO_MODE_EVT_RISING 0x10120000U /*!< External Event Mode with Rising edge trigger detection */ -#define GPIO_MODE_EVT_FALLING 0x10220000U /*!< External Event Mode with Falling edge trigger detection */ -#define GPIO_MODE_EVT_RISING_FALLING 0x10320000U /*!< External Event Mode with Rising/Falling edge trigger detection */ +#define GPIO_MODE_EVT_RISING (MODE_INPUT | EXTI_EVT | TRIGGER_RISING) /*!< External Event Mode with Rising edge trigger detection */ +#define GPIO_MODE_EVT_FALLING (MODE_INPUT | EXTI_EVT | TRIGGER_FALLING) /*!< External Event Mode with Falling edge trigger detection */ +#define GPIO_MODE_EVT_RISING_FALLING (MODE_INPUT | EXTI_EVT | TRIGGER_RISING | TRIGGER_FALLING) /*!< External Event Mode with Rising/Falling edge trigger detection */ + /** * @} */ @@ -252,6 +252,24 @@ void HAL_GPIO_EXTI_Callback(uint16_t GPIO_Pin); /** @defgroup GPIO_Private_Constants GPIO Private Constants * @{ */ +#define GPIO_MODE_Pos 0U +#define GPIO_MODE (0x3UL << GPIO_MODE_Pos) +#define MODE_INPUT (0x0UL << GPIO_MODE_Pos) +#define MODE_OUTPUT (0x1UL << GPIO_MODE_Pos) +#define MODE_AF (0x2UL << GPIO_MODE_Pos) +#define MODE_ANALOG (0x3UL << GPIO_MODE_Pos) +#define OUTPUT_TYPE_Pos 4U +#define OUTPUT_TYPE (0x1UL << OUTPUT_TYPE_Pos) +#define OUTPUT_PP (0x0UL << OUTPUT_TYPE_Pos) +#define OUTPUT_OD (0x1UL << OUTPUT_TYPE_Pos) +#define EXTI_MODE_Pos 16U +#define EXTI_MODE (0x3UL << EXTI_MODE_Pos) +#define EXTI_IT (0x1UL << EXTI_MODE_Pos) +#define EXTI_EVT (0x2UL << EXTI_MODE_Pos) +#define TRIGGER_MODE_Pos 20U +#define TRIGGER_MODE (0x7UL << TRIGGER_MODE_Pos) +#define TRIGGER_RISING (0x1UL << TRIGGER_MODE_Pos) +#define TRIGGER_FALLING (0x2UL << TRIGGER_MODE_Pos) /** * @} diff --git a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_gpio_ex.h b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_gpio_ex.h index 4e42108..1ac348e 100644 --- a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_gpio_ex.h +++ b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_gpio_ex.h @@ -1442,21 +1442,21 @@ /*----------------------------------------------------------------------------*/ /*---------------------------------------- STM32F401xx------------------------*/ -#if defined(STM32F401xC) || defined(STM32F401xE) +#if defined(STM32F401xC) || defined(STM32F401xE) #define IS_GPIO_AF(AF) (((AF) == GPIO_AF0_RTC_50Hz) || ((AF) == GPIO_AF12_SDIO) || \ ((AF) == GPIO_AF0_MCO) || ((AF) == GPIO_AF0_TAMPER) || \ ((AF) == GPIO_AF0_SWJ) || ((AF) == GPIO_AF0_TRACE) || \ ((AF) == GPIO_AF1_TIM1) || ((AF) == GPIO_AF1_TIM2) || \ ((AF) == GPIO_AF2_TIM3) || ((AF) == GPIO_AF2_TIM4) || \ - ((AF) == GPIO_AF2_TIM5) || ((AF) == GPIO_AF4_I2C1) || \ - ((AF) == GPIO_AF4_I2C2) || ((AF) == GPIO_AF4_I2C3) || \ - ((AF) == GPIO_AF5_SPI1) || ((AF) == GPIO_AF5_SPI2) || \ - ((AF) == GPIO_AF6_SPI3) || ((AF) == GPIO_AF5_SPI4) || \ - ((AF) == GPIO_AF7_USART1) || ((AF) == GPIO_AF7_USART2) || \ - ((AF) == GPIO_AF8_USART6) || ((AF) == GPIO_AF10_OTG_FS) || \ + ((AF) == GPIO_AF2_TIM5) || ((AF) == GPIO_AF3_TIM9) || \ + ((AF) == GPIO_AF3_TIM10) || ((AF) == GPIO_AF3_TIM11) || \ + ((AF) == GPIO_AF4_I2C1) || ((AF) == GPIO_AF4_I2C2) || \ + ((AF) == GPIO_AF4_I2C3) || ((AF) == GPIO_AF5_SPI1) || \ + ((AF) == GPIO_AF5_SPI2) || ((AF) == GPIO_AF5_SPI4) || \ + ((AF) == GPIO_AF6_SPI3) || ((AF) == GPIO_AF7_USART1) || \ + ((AF) == GPIO_AF7_USART2) || ((AF) == GPIO_AF8_USART6) || \ ((AF) == GPIO_AF9_I2C2) || ((AF) == GPIO_AF9_I2C3) || \ - ((AF) == GPIO_AF15_EVENTOUT)) - + ((AF) == GPIO_AF10_OTG_FS) || ((AF) == GPIO_AF15_EVENTOUT)) #endif /* STM32F401xC || STM32F401xE */ /*----------------------------------------------------------------------------*/ /*---------------------------------------- STM32F410xx------------------------*/ diff --git a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_rcc.h b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_rcc.h index 44553fb..0dba2cf 100644 --- a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_rcc.h +++ b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_rcc.h @@ -976,11 +976,10 @@ typedef struct * a Power On Reset (POR). * @param __RTCCLKSource__ specifies the RTC clock source. * This parameter can be one of the following values: - @arg @ref RCC_RTCCLKSOURCE_NO_CLK: No clock selected as RTC clock. - * @arg @ref RCC_RTCCLKSOURCE_LSE: LSE selected as RTC clock. - * @arg @ref RCC_RTCCLKSOURCE_LSI: LSI selected as RTC clock. - * @arg @ref RCC_RTCCLKSOURCE_HSE_DIVX: HSE clock divided by x selected - * as RTC clock, where x:[2,31] + * @arg @ref RCC_RTCCLKSOURCE_NO_CLK : No clock selected as RTC clock. + * @arg @ref RCC_RTCCLKSOURCE_LSE : LSE selected as RTC clock. + * @arg @ref RCC_RTCCLKSOURCE_LSI : LSI selected as RTC clock. + * @arg @ref RCC_RTCCLKSOURCE_HSE_DIVX HSE divided by X selected as RTC clock (X can be retrieved thanks to @ref __HAL_RCC_GET_RTC_HSE_PRESCALER() * @note If the LSE or LSI is used as RTC clock source, the RTC continues to * work in STOP and STANDBY modes, and can be used as wake-up source. * However, when the HSE clock is used as RTC clock source, the RTC @@ -1007,8 +1006,7 @@ typedef struct /** * @brief Get the RTC and HSE clock divider (RTCPRE). * @retval Returned value can be one of the following values: - * @arg @ref RCC_RTCCLKSOURCE_HSE_DIVX: HSE clock divided by x selected - * as RTC clock, where x:[2,31] + * @arg @ref RCC_RTCCLKSOURCE_HSE_DIVX HSE divided by X selected as RTC clock (X can be retrieved thanks to @ref __HAL_RCC_GET_RTC_HSE_PRESCALER() */ #define __HAL_RCC_GET_RTC_HSE_PRESCALER() (READ_BIT(RCC->CFGR, RCC_CFGR_RTCPRE) | RCC_BDCR_RTCSEL) diff --git a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_rcc_ex.h b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_rcc_ex.h index 1412b9f..81fbc6e 100644 --- a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_rcc_ex.h +++ b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_rcc_ex.h @@ -103,7 +103,7 @@ typedef struct */ typedef struct { - uint32_t PLLSAIM; /*!< Spcifies division factor for PLL VCO input clock. + uint32_t PLLSAIM; /*!< Specifies division factor for PLL VCO input clock. This parameter must be a number between Min_Data = 2 and Max_Data = 63 */ uint32_t PLLSAIN; /*!< Specifies the multiplication factor for PLLI2S VCO output clock. @@ -4969,7 +4969,6 @@ typedef struct tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_RTCAPBEN);\ UNUSED(tmpreg); \ } while(0U) -#if defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F413xx) || defined(STM32F423xx) #define __HAL_RCC_USART3_CLK_ENABLE() do { \ __IO uint32_t tmpreg = 0x00U; \ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_USART3EN);\ @@ -4977,7 +4976,6 @@ typedef struct tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_USART3EN);\ UNUSED(tmpreg); \ } while(0U) -#endif /* STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F413xx || STM32F423xx */ #if defined(STM32F413xx) || defined(STM32F423xx) #define __HAL_RCC_UART4_CLK_ENABLE() do { \ @@ -5098,9 +5096,7 @@ typedef struct #endif /* STM32F413xx || STM32F423xx */ #define __HAL_RCC_RTCAPB_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_RTCAPBEN)) #define __HAL_RCC_SPI3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_SPI3EN)) -#if defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F413xx) || defined(STM32F423xx) #define __HAL_RCC_USART3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_USART3EN)) -#endif /* STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F413xx || STM32F423xx */ #if defined(STM32F413xx) || defined(STM32F423xx) #define __HAL_RCC_UART4_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_UART4EN)) #define __HAL_RCC_UART5_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_UART5EN)) @@ -5140,9 +5136,7 @@ typedef struct #endif /* STM32F413xx || STM32F423xx */ #define __HAL_RCC_RTCAPB_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_RTCAPBEN)) != RESET) #define __HAL_RCC_SPI3_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_SPI3EN)) != RESET) -#if defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F413xx) || defined(STM32F423xx) #define __HAL_RCC_USART3_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_USART3EN)) != RESET) -#endif /* STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F413xx | STM32F423xx */ #if defined(STM32F413xx) || defined(STM32F423xx) #define __HAL_RCC_UART4_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_UART4EN)) != RESET) #define __HAL_RCC_UART5_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_UART5EN)) != RESET) @@ -5171,9 +5165,7 @@ typedef struct #endif /* STM32F413xx || STM32F423xx */ #define __HAL_RCC_RTCAPB_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_RTCAPBEN)) == RESET) #define __HAL_RCC_SPI3_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_SPI3EN)) == RESET) -#if defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F413xx) || defined(STM32F423xx) #define __HAL_RCC_USART3_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_USART3EN)) == RESET) -#endif /* STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F413xx | STM32F423xx */ #if defined(STM32F413xx) || defined(STM32F423xx) #define __HAL_RCC_UART4_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_UART4EN)) == RESET) #define __HAL_RCC_UART5_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_UART5EN)) == RESET) @@ -5445,9 +5437,7 @@ typedef struct #define __HAL_RCC_LPTIM1_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_LPTIM1RST)) #endif /* STM32F413xx || STM32F423xx */ #define __HAL_RCC_SPI3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_SPI3RST)) -#if defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F413xx) || defined(STM32F423xx) #define __HAL_RCC_USART3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_USART3RST)) -#endif /* STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F413xx || STM32F423xx */ #if defined(STM32F413xx) || defined(STM32F423xx) #define __HAL_RCC_UART4_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_UART4RST)) #define __HAL_RCC_UART5_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_UART5RST)) @@ -5475,9 +5465,7 @@ typedef struct #define __HAL_RCC_LPTIM1_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_LPTIM1RST)) #endif /* STM32F413xx || STM32F423xx */ #define __HAL_RCC_SPI3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_SPI3RST)) -#if defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F413xx) || defined(STM32F423xx) #define __HAL_RCC_USART3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_USART3RST)) -#endif /* STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F413xx || STM32F423xx */ #if defined(STM32F413xx) || defined(STM32F423xx) #define __HAL_RCC_UART4_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_UART4RST)) #define __HAL_RCC_UART5_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_UART5RST)) @@ -5633,9 +5621,7 @@ typedef struct #endif /* STM32F413xx || STM32F423xx */ #define __HAL_RCC_RTCAPB_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_RTCAPBLPEN)) #define __HAL_RCC_SPI3_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_SPI3LPEN)) -#if defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F413xx) || defined(STM32F423xx) #define __HAL_RCC_USART3_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_USART3LPEN)) -#endif /* STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F413xx || STM32F423xx */ #if defined(STM32F413xx) || defined(STM32F423xx) #define __HAL_RCC_UART4_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_UART4LPEN)) #define __HAL_RCC_UART5_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_UART5LPEN)) @@ -5664,9 +5650,7 @@ typedef struct #endif /* STM32F413xx || STM32F423xx */ #define __HAL_RCC_RTCAPB_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_RTCAPBLPEN)) #define __HAL_RCC_SPI3_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_SPI3LPEN)) -#if defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F413xx) || defined(STM32F423xx) #define __HAL_RCC_USART3_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_USART3LPEN)) -#endif /* STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F413xx || STM32F423xx */ #if defined(STM32F413xx) || defined(STM32F423xx) #define __HAL_RCC_UART4_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_UART4LPEN)) #define __HAL_RCC_UART5_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_UART5LPEN)) @@ -6384,7 +6368,7 @@ typedef struct * @param __DFSDM1_CLKSOURCE__ specifies the DFSDM1 clock source. * This parameter can be one of the following values: * @arg RCC_DFSDM1CLKSOURCE_PCLK2: PCLK2 clock used as kernel clock. - * @arg RCC_DFSDM1CLKSOURCE_SYSCLK: System clock used as kernal clock. + * @arg RCC_DFSDM1CLKSOURCE_SYSCLK: System clock used as kernel clock. * @retval None */ #define __HAL_RCC_DFSDM1_CONFIG(__DFSDM1_CLKSOURCE__) MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_CKDFSDM1SEL, (__DFSDM1_CLKSOURCE__)) @@ -6392,7 +6376,7 @@ typedef struct /** @brief Macro to get the DFSDM1 clock source. * @retval The clock source can be one of the following values: * @arg RCC_DFSDM1CLKSOURCE_PCLK2: PCLK2 clock used as kernel clock. - * @arg RCC_DFSDM1CLKSOURCE_SYSCLK: System clock used as kernal clock. + * @arg RCC_DFSDM1CLKSOURCE_SYSCLK: System clock used as kernel clock. */ #define __HAL_RCC_GET_DFSDM1_SOURCE() ((uint32_t)(READ_BIT(RCC->DCKCFGR, RCC_DCKCFGR_CKDFSDM1SEL))) @@ -6420,7 +6404,7 @@ typedef struct * @param __DFSDM2_CLKSOURCE__ specifies the DFSDM1 clock source. * This parameter can be one of the following values: * @arg RCC_DFSDM2CLKSOURCE_PCLK2: PCLK2 clock used as kernel clock. - * @arg RCC_DFSDM2CLKSOURCE_SYSCLK: System clock used as kernal clock. + * @arg RCC_DFSDM2CLKSOURCE_SYSCLK: System clock used as kernel clock. * @retval None */ #define __HAL_RCC_DFSDM2_CONFIG(__DFSDM2_CLKSOURCE__) MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_CKDFSDM1SEL, (__DFSDM2_CLKSOURCE__)) @@ -6428,7 +6412,7 @@ typedef struct /** @brief Macro to get the DFSDM2 clock source. * @retval The clock source can be one of the following values: * @arg RCC_DFSDM2CLKSOURCE_PCLK2: PCLK2 clock used as kernel clock. - * @arg RCC_DFSDM2CLKSOURCE_SYSCLK: System clock used as kernal clock. + * @arg RCC_DFSDM2CLKSOURCE_SYSCLK: System clock used as kernel clock. */ #define __HAL_RCC_GET_DFSDM2_SOURCE() ((uint32_t)(READ_BIT(RCC->DCKCFGR, RCC_DCKCFGR_CKDFSDM1SEL))) @@ -6867,16 +6851,8 @@ HAL_StatusTypeDef HAL_RCCEx_DisablePLLSAI(void); /** @defgroup RCCEx_IS_RCC_Definitions RCC Private macros to check input parameters * @{ */ -#if defined(STM32F411xE) -#define IS_RCC_PLLN_VALUE(VALUE) ((192U <= (VALUE)) && ((VALUE) <= 432U)) -#define IS_RCC_PLLI2SN_VALUE(VALUE) ((192U <= (VALUE)) && ((VALUE) <= 432U)) -#else /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F427xx || STM32F437xx || - STM32F429xx || STM32F439xx || STM32F401xC || STM32F401xE || STM32F410Tx || STM32F410Cx || - STM32F410Rx || STM32F446xx || STM32F469xx || STM32F479xx || STM32F412Cx || STM32F412Rx || - STM32F412Vx || STM32F412Zx || STM32F413xx || STM32F423xx */ #define IS_RCC_PLLN_VALUE(VALUE) ((50U <= (VALUE)) && ((VALUE) <= 432U)) #define IS_RCC_PLLI2SN_VALUE(VALUE) ((50U <= (VALUE)) && ((VALUE) <= 432U)) -#endif /* STM32F411xE */ #if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx) #define IS_RCC_PERIPHCLOCK(SELECTION) ((1U <= (SELECTION)) && ((SELECTION) <= 0x0000007FU)) diff --git a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_tim.h b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_tim.h index 07cb470..0c8d9df 100644 --- a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_tim.h +++ b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_tim.h @@ -65,8 +65,10 @@ typedef struct This means in PWM mode that (N+1) corresponds to: - the number of PWM periods in edge-aligned mode - the number of half PWM period in center-aligned mode - GP timers: this parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF. - Advanced timers: this parameter must be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF. */ + GP timers: this parameter must be a number between Min_Data = 0x00 and + Max_Data = 0xFF. + Advanced timers: this parameter must be a number between Min_Data = 0x0000 and + Max_Data = 0xFFFF. */ uint32_t AutoReloadPreload; /*!< Specifies the auto-reload preload. This parameter can be a value of @ref TIM_AutoReloadPreload */ @@ -218,7 +220,8 @@ typedef struct uint32_t ClearInputPolarity; /*!< TIM Clear Input polarity This parameter can be a value of @ref TIM_ClearInput_Polarity */ uint32_t ClearInputPrescaler; /*!< TIM Clear Input prescaler - This parameter must be 0: When OCRef clear feature is used with ETR source, ETR prescaler must be off */ + This parameter must be 0: When OCRef clear feature is used with ETR source, + ETR prescaler must be off */ uint32_t ClearInputFilter; /*!< TIM Clear Input filter This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */ } TIM_ClearInputConfigTypeDef; @@ -264,22 +267,22 @@ typedef struct */ typedef struct { - uint32_t OffStateRunMode; /*!< TIM off state in run mode - This parameter can be a value of @ref TIM_OSSR_Off_State_Selection_for_Run_mode_state */ - uint32_t OffStateIDLEMode; /*!< TIM off state in IDLE mode - This parameter can be a value of @ref TIM_OSSI_Off_State_Selection_for_Idle_mode_state */ - uint32_t LockLevel; /*!< TIM Lock level - This parameter can be a value of @ref TIM_Lock_level */ - uint32_t DeadTime; /*!< TIM dead Time - This parameter can be a number between Min_Data = 0x00 and Max_Data = 0xFF */ - uint32_t BreakState; /*!< TIM Break State - This parameter can be a value of @ref TIM_Break_Input_enable_disable */ - uint32_t BreakPolarity; /*!< TIM Break input polarity - This parameter can be a value of @ref TIM_Break_Polarity */ - uint32_t BreakFilter; /*!< Specifies the break input filter. - This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */ - uint32_t AutomaticOutput; /*!< TIM Automatic Output Enable state - This parameter can be a value of @ref TIM_AOE_Bit_Set_Reset */ + uint32_t OffStateRunMode; /*!< TIM off state in run mode, This parameter can be a value of @ref TIM_OSSR_Off_State_Selection_for_Run_mode_state */ + + uint32_t OffStateIDLEMode; /*!< TIM off state in IDLE mode, This parameter can be a value of @ref TIM_OSSI_Off_State_Selection_for_Idle_mode_state */ + + uint32_t LockLevel; /*!< TIM Lock level, This parameter can be a value of @ref TIM_Lock_level */ + + uint32_t DeadTime; /*!< TIM dead Time, This parameter can be a number between Min_Data = 0x00 and Max_Data = 0xFF */ + + uint32_t BreakState; /*!< TIM Break State, This parameter can be a value of @ref TIM_Break_Input_enable_disable */ + + uint32_t BreakPolarity; /*!< TIM Break input polarity, This parameter can be a value of @ref TIM_Break_Polarity */ + + uint32_t BreakFilter; /*!< Specifies the break input filter.This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */ + + uint32_t AutomaticOutput; /*!< TIM Automatic Output Enable state, This parameter can be a value of @ref TIM_AOE_Bit_Set_Reset */ + } TIM_BreakDeadTimeConfigTypeDef; /** @@ -294,6 +297,26 @@ typedef enum HAL_TIM_STATE_ERROR = 0x04U /*!< Reception process is ongoing */ } HAL_TIM_StateTypeDef; +/** + * @brief TIM Channel States definition + */ +typedef enum +{ + HAL_TIM_CHANNEL_STATE_RESET = 0x00U, /*!< TIM Channel initial state */ + HAL_TIM_CHANNEL_STATE_READY = 0x01U, /*!< TIM Channel ready for use */ + HAL_TIM_CHANNEL_STATE_BUSY = 0x02U, /*!< An internal process is ongoing on the TIM channel */ +} HAL_TIM_ChannelStateTypeDef; + +/** + * @brief DMA Burst States definition + */ +typedef enum +{ + HAL_DMA_BURST_STATE_RESET = 0x00U, /*!< DMA Burst initial state */ + HAL_DMA_BURST_STATE_READY = 0x01U, /*!< DMA Burst ready for use */ + HAL_DMA_BURST_STATE_BUSY = 0x02U, /*!< Ongoing DMA Burst */ +} HAL_TIM_DMABurstStateTypeDef; + /** * @brief HAL Active channel structures definition */ @@ -315,13 +338,16 @@ typedef struct __TIM_HandleTypeDef typedef struct #endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ { - TIM_TypeDef *Instance; /*!< Register base address */ - TIM_Base_InitTypeDef Init; /*!< TIM Time Base required parameters */ - HAL_TIM_ActiveChannel Channel; /*!< Active channel */ - DMA_HandleTypeDef *hdma[7]; /*!< DMA Handlers array - This array is accessed by a @ref DMA_Handle_index */ - HAL_LockTypeDef Lock; /*!< Locking object */ - __IO HAL_TIM_StateTypeDef State; /*!< TIM operation state */ + TIM_TypeDef *Instance; /*!< Register base address */ + TIM_Base_InitTypeDef Init; /*!< TIM Time Base required parameters */ + HAL_TIM_ActiveChannel Channel; /*!< Active channel */ + DMA_HandleTypeDef *hdma[7]; /*!< DMA Handlers array + This array is accessed by a @ref DMA_Handle_index */ + HAL_LockTypeDef Lock; /*!< Locking object */ + __IO HAL_TIM_StateTypeDef State; /*!< TIM operation state */ + __IO HAL_TIM_ChannelStateTypeDef ChannelState[4]; /*!< TIM channel operation state */ + __IO HAL_TIM_ChannelStateTypeDef ChannelNState[4]; /*!< TIM complementary channel operation state */ + __IO HAL_TIM_DMABurstStateTypeDef DMABurstState; /*!< DMA burst operation state */ #if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) void (* Base_MspInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Base Msp Init Callback */ @@ -360,34 +386,34 @@ typedef struct */ typedef enum { - HAL_TIM_BASE_MSPINIT_CB_ID = 0x00U /*!< TIM Base MspInit Callback ID */ - ,HAL_TIM_BASE_MSPDEINIT_CB_ID = 0x01U /*!< TIM Base MspDeInit Callback ID */ - ,HAL_TIM_IC_MSPINIT_CB_ID = 0x02U /*!< TIM IC MspInit Callback ID */ - ,HAL_TIM_IC_MSPDEINIT_CB_ID = 0x03U /*!< TIM IC MspDeInit Callback ID */ - ,HAL_TIM_OC_MSPINIT_CB_ID = 0x04U /*!< TIM OC MspInit Callback ID */ - ,HAL_TIM_OC_MSPDEINIT_CB_ID = 0x05U /*!< TIM OC MspDeInit Callback ID */ - ,HAL_TIM_PWM_MSPINIT_CB_ID = 0x06U /*!< TIM PWM MspInit Callback ID */ - ,HAL_TIM_PWM_MSPDEINIT_CB_ID = 0x07U /*!< TIM PWM MspDeInit Callback ID */ - ,HAL_TIM_ONE_PULSE_MSPINIT_CB_ID = 0x08U /*!< TIM One Pulse MspInit Callback ID */ - ,HAL_TIM_ONE_PULSE_MSPDEINIT_CB_ID = 0x09U /*!< TIM One Pulse MspDeInit Callback ID */ - ,HAL_TIM_ENCODER_MSPINIT_CB_ID = 0x0AU /*!< TIM Encoder MspInit Callback ID */ - ,HAL_TIM_ENCODER_MSPDEINIT_CB_ID = 0x0BU /*!< TIM Encoder MspDeInit Callback ID */ - ,HAL_TIM_HALL_SENSOR_MSPINIT_CB_ID = 0x0CU /*!< TIM Hall Sensor MspDeInit Callback ID */ - ,HAL_TIM_HALL_SENSOR_MSPDEINIT_CB_ID = 0x0DU /*!< TIM Hall Sensor MspDeInit Callback ID */ - ,HAL_TIM_PERIOD_ELAPSED_CB_ID = 0x0EU /*!< TIM Period Elapsed Callback ID */ - ,HAL_TIM_PERIOD_ELAPSED_HALF_CB_ID = 0x0FU /*!< TIM Period Elapsed half complete Callback ID */ - ,HAL_TIM_TRIGGER_CB_ID = 0x10U /*!< TIM Trigger Callback ID */ - ,HAL_TIM_TRIGGER_HALF_CB_ID = 0x11U /*!< TIM Trigger half complete Callback ID */ + HAL_TIM_BASE_MSPINIT_CB_ID = 0x00U /*!< TIM Base MspInit Callback ID */ + , HAL_TIM_BASE_MSPDEINIT_CB_ID = 0x01U /*!< TIM Base MspDeInit Callback ID */ + , HAL_TIM_IC_MSPINIT_CB_ID = 0x02U /*!< TIM IC MspInit Callback ID */ + , HAL_TIM_IC_MSPDEINIT_CB_ID = 0x03U /*!< TIM IC MspDeInit Callback ID */ + , HAL_TIM_OC_MSPINIT_CB_ID = 0x04U /*!< TIM OC MspInit Callback ID */ + , HAL_TIM_OC_MSPDEINIT_CB_ID = 0x05U /*!< TIM OC MspDeInit Callback ID */ + , HAL_TIM_PWM_MSPINIT_CB_ID = 0x06U /*!< TIM PWM MspInit Callback ID */ + , HAL_TIM_PWM_MSPDEINIT_CB_ID = 0x07U /*!< TIM PWM MspDeInit Callback ID */ + , HAL_TIM_ONE_PULSE_MSPINIT_CB_ID = 0x08U /*!< TIM One Pulse MspInit Callback ID */ + , HAL_TIM_ONE_PULSE_MSPDEINIT_CB_ID = 0x09U /*!< TIM One Pulse MspDeInit Callback ID */ + , HAL_TIM_ENCODER_MSPINIT_CB_ID = 0x0AU /*!< TIM Encoder MspInit Callback ID */ + , HAL_TIM_ENCODER_MSPDEINIT_CB_ID = 0x0BU /*!< TIM Encoder MspDeInit Callback ID */ + , HAL_TIM_HALL_SENSOR_MSPINIT_CB_ID = 0x0CU /*!< TIM Hall Sensor MspDeInit Callback ID */ + , HAL_TIM_HALL_SENSOR_MSPDEINIT_CB_ID = 0x0DU /*!< TIM Hall Sensor MspDeInit Callback ID */ + , HAL_TIM_PERIOD_ELAPSED_CB_ID = 0x0EU /*!< TIM Period Elapsed Callback ID */ + , HAL_TIM_PERIOD_ELAPSED_HALF_CB_ID = 0x0FU /*!< TIM Period Elapsed half complete Callback ID */ + , HAL_TIM_TRIGGER_CB_ID = 0x10U /*!< TIM Trigger Callback ID */ + , HAL_TIM_TRIGGER_HALF_CB_ID = 0x11U /*!< TIM Trigger half complete Callback ID */ - ,HAL_TIM_IC_CAPTURE_CB_ID = 0x12U /*!< TIM Input Capture Callback ID */ - ,HAL_TIM_IC_CAPTURE_HALF_CB_ID = 0x13U /*!< TIM Input Capture half complete Callback ID */ - ,HAL_TIM_OC_DELAY_ELAPSED_CB_ID = 0x14U /*!< TIM Output Compare Delay Elapsed Callback ID */ - ,HAL_TIM_PWM_PULSE_FINISHED_CB_ID = 0x15U /*!< TIM PWM Pulse Finished Callback ID */ - ,HAL_TIM_PWM_PULSE_FINISHED_HALF_CB_ID = 0x16U /*!< TIM PWM Pulse Finished half complete Callback ID */ - ,HAL_TIM_ERROR_CB_ID = 0x17U /*!< TIM Error Callback ID */ - ,HAL_TIM_COMMUTATION_CB_ID = 0x18U /*!< TIM Commutation Callback ID */ - ,HAL_TIM_COMMUTATION_HALF_CB_ID = 0x19U /*!< TIM Commutation half complete Callback ID */ - ,HAL_TIM_BREAK_CB_ID = 0x1AU /*!< TIM Break Callback ID */ + , HAL_TIM_IC_CAPTURE_CB_ID = 0x12U /*!< TIM Input Capture Callback ID */ + , HAL_TIM_IC_CAPTURE_HALF_CB_ID = 0x13U /*!< TIM Input Capture half complete Callback ID */ + , HAL_TIM_OC_DELAY_ELAPSED_CB_ID = 0x14U /*!< TIM Output Compare Delay Elapsed Callback ID */ + , HAL_TIM_PWM_PULSE_FINISHED_CB_ID = 0x15U /*!< TIM PWM Pulse Finished Callback ID */ + , HAL_TIM_PWM_PULSE_FINISHED_HALF_CB_ID = 0x16U /*!< TIM PWM Pulse Finished half complete Callback ID */ + , HAL_TIM_ERROR_CB_ID = 0x17U /*!< TIM Error Callback ID */ + , HAL_TIM_COMMUTATION_CB_ID = 0x18U /*!< TIM Commutation Callback ID */ + , HAL_TIM_COMMUTATION_HALF_CB_ID = 0x19U /*!< TIM Commutation half complete Callback ID */ + , HAL_TIM_BREAK_CB_ID = 0x1AU /*!< TIM Break Callback ID */ } HAL_TIM_CallbackIDTypeDef; /** @@ -605,10 +631,8 @@ typedef void (*pTIM_CallbackTypeDef)(TIM_HandleTypeDef *htim); /*!< pointer to /** @defgroup TIM_Input_Capture_Selection TIM Input Capture Selection * @{ */ -#define TIM_ICSELECTION_DIRECTTI TIM_CCMR1_CC1S_0 /*!< TIM Input 1, 2, 3 or 4 is selected to be - connected to IC1, IC2, IC3 or IC4, respectively */ -#define TIM_ICSELECTION_INDIRECTTI TIM_CCMR1_CC1S_1 /*!< TIM Input 1, 2, 3 or 4 is selected to be - connected to IC2, IC1, IC4 or IC3, respectively */ +#define TIM_ICSELECTION_DIRECTTI TIM_CCMR1_CC1S_0 /*!< TIM Input 1, 2, 3 or 4 is selected to be connected to IC1, IC2, IC3 or IC4, respectively */ +#define TIM_ICSELECTION_INDIRECTTI TIM_CCMR1_CC1S_1 /*!< TIM Input 1, 2, 3 or 4 is selected to be connected to IC2, IC1, IC4 or IC3, respectively */ #define TIM_ICSELECTION_TRC TIM_CCMR1_CC1S /*!< TIM Input 1, 2, 3 or 4 is selected to be connected to TRC */ /** * @} @@ -823,8 +847,7 @@ typedef void (*pTIM_CallbackTypeDef)(TIM_HandleTypeDef *htim); /*!< pointer to * @{ */ #define TIM_AUTOMATICOUTPUT_DISABLE 0x00000000U /*!< MOE can be set only by software */ -#define TIM_AUTOMATICOUTPUT_ENABLE TIM_BDTR_AOE /*!< MOE can be set by software or automatically at the next update event - (if none of the break inputs BRK and BRK2 is active) */ +#define TIM_AUTOMATICOUTPUT_ENABLE TIM_BDTR_AOE /*!< MOE can be set by software or automatically at the next update event (if none of the break inputs BRK and BRK2 is active) */ /** * @} */ @@ -931,24 +954,24 @@ typedef void (*pTIM_CallbackTypeDef)(TIM_HandleTypeDef *htim); /*!< pointer to /** @defgroup TIM_DMA_Burst_Length TIM DMA Burst Length * @{ */ -#define TIM_DMABURSTLENGTH_1TRANSFER 0x00000000U /*!< The transfer is done to 1 register starting trom TIMx_CR1 + TIMx_DCR.DBA */ -#define TIM_DMABURSTLENGTH_2TRANSFERS 0x00000100U /*!< The transfer is done to 2 registers starting trom TIMx_CR1 + TIMx_DCR.DBA */ -#define TIM_DMABURSTLENGTH_3TRANSFERS 0x00000200U /*!< The transfer is done to 3 registers starting trom TIMx_CR1 + TIMx_DCR.DBA */ -#define TIM_DMABURSTLENGTH_4TRANSFERS 0x00000300U /*!< The transfer is done to 4 registers starting trom TIMx_CR1 + TIMx_DCR.DBA */ -#define TIM_DMABURSTLENGTH_5TRANSFERS 0x00000400U /*!< The transfer is done to 5 registers starting trom TIMx_CR1 + TIMx_DCR.DBA */ -#define TIM_DMABURSTLENGTH_6TRANSFERS 0x00000500U /*!< The transfer is done to 6 registers starting trom TIMx_CR1 + TIMx_DCR.DBA */ -#define TIM_DMABURSTLENGTH_7TRANSFERS 0x00000600U /*!< The transfer is done to 7 registers starting trom TIMx_CR1 + TIMx_DCR.DBA */ -#define TIM_DMABURSTLENGTH_8TRANSFERS 0x00000700U /*!< The transfer is done to 8 registers starting trom TIMx_CR1 + TIMx_DCR.DBA */ -#define TIM_DMABURSTLENGTH_9TRANSFERS 0x00000800U /*!< The transfer is done to 9 registers starting trom TIMx_CR1 + TIMx_DCR.DBA */ -#define TIM_DMABURSTLENGTH_10TRANSFERS 0x00000900U /*!< The transfer is done to 10 registers starting trom TIMx_CR1 + TIMx_DCR.DBA */ -#define TIM_DMABURSTLENGTH_11TRANSFERS 0x00000A00U /*!< The transfer is done to 11 registers starting trom TIMx_CR1 + TIMx_DCR.DBA */ -#define TIM_DMABURSTLENGTH_12TRANSFERS 0x00000B00U /*!< The transfer is done to 12 registers starting trom TIMx_CR1 + TIMx_DCR.DBA */ -#define TIM_DMABURSTLENGTH_13TRANSFERS 0x00000C00U /*!< The transfer is done to 13 registers starting trom TIMx_CR1 + TIMx_DCR.DBA */ -#define TIM_DMABURSTLENGTH_14TRANSFERS 0x00000D00U /*!< The transfer is done to 14 registers starting trom TIMx_CR1 + TIMx_DCR.DBA */ -#define TIM_DMABURSTLENGTH_15TRANSFERS 0x00000E00U /*!< The transfer is done to 15 registers starting trom TIMx_CR1 + TIMx_DCR.DBA */ -#define TIM_DMABURSTLENGTH_16TRANSFERS 0x00000F00U /*!< The transfer is done to 16 registers starting trom TIMx_CR1 + TIMx_DCR.DBA */ -#define TIM_DMABURSTLENGTH_17TRANSFERS 0x00001000U /*!< The transfer is done to 17 registers starting trom TIMx_CR1 + TIMx_DCR.DBA */ -#define TIM_DMABURSTLENGTH_18TRANSFERS 0x00001100U /*!< The transfer is done to 18 registers starting trom TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_1TRANSFER 0x00000000U /*!< The transfer is done to 1 register starting from TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_2TRANSFERS 0x00000100U /*!< The transfer is done to 2 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_3TRANSFERS 0x00000200U /*!< The transfer is done to 3 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_4TRANSFERS 0x00000300U /*!< The transfer is done to 4 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_5TRANSFERS 0x00000400U /*!< The transfer is done to 5 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_6TRANSFERS 0x00000500U /*!< The transfer is done to 6 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_7TRANSFERS 0x00000600U /*!< The transfer is done to 7 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_8TRANSFERS 0x00000700U /*!< The transfer is done to 8 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_9TRANSFERS 0x00000800U /*!< The transfer is done to 9 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_10TRANSFERS 0x00000900U /*!< The transfer is done to 10 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_11TRANSFERS 0x00000A00U /*!< The transfer is done to 11 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_12TRANSFERS 0x00000B00U /*!< The transfer is done to 12 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_13TRANSFERS 0x00000C00U /*!< The transfer is done to 13 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_14TRANSFERS 0x00000D00U /*!< The transfer is done to 14 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_15TRANSFERS 0x00000E00U /*!< The transfer is done to 15 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_16TRANSFERS 0x00000F00U /*!< The transfer is done to 16 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_17TRANSFERS 0x00001000U /*!< The transfer is done to 17 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_18TRANSFERS 0x00001100U /*!< The transfer is done to 18 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ /** * @} */ @@ -993,25 +1016,45 @@ typedef void (*pTIM_CallbackTypeDef)(TIM_HandleTypeDef *htim); /*!< pointer to * @retval None */ #if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) -#define __HAL_TIM_RESET_HANDLE_STATE(__HANDLE__) do { \ - (__HANDLE__)->State = HAL_TIM_STATE_RESET; \ - (__HANDLE__)->Base_MspInitCallback = NULL; \ - (__HANDLE__)->Base_MspDeInitCallback = NULL; \ - (__HANDLE__)->IC_MspInitCallback = NULL; \ - (__HANDLE__)->IC_MspDeInitCallback = NULL; \ - (__HANDLE__)->OC_MspInitCallback = NULL; \ - (__HANDLE__)->OC_MspDeInitCallback = NULL; \ - (__HANDLE__)->PWM_MspInitCallback = NULL; \ - (__HANDLE__)->PWM_MspDeInitCallback = NULL; \ - (__HANDLE__)->OnePulse_MspInitCallback = NULL; \ - (__HANDLE__)->OnePulse_MspDeInitCallback = NULL; \ - (__HANDLE__)->Encoder_MspInitCallback = NULL; \ - (__HANDLE__)->Encoder_MspDeInitCallback = NULL; \ - (__HANDLE__)->HallSensor_MspInitCallback = NULL; \ - (__HANDLE__)->HallSensor_MspDeInitCallback = NULL; \ +#define __HAL_TIM_RESET_HANDLE_STATE(__HANDLE__) do { \ + (__HANDLE__)->State = HAL_TIM_STATE_RESET; \ + (__HANDLE__)->ChannelState[0] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->ChannelState[1] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->ChannelState[2] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->ChannelState[3] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->ChannelNState[0] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->ChannelNState[1] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->ChannelNState[2] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->ChannelNState[3] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->DMABurstState = HAL_DMA_BURST_STATE_RESET; \ + (__HANDLE__)->Base_MspInitCallback = NULL; \ + (__HANDLE__)->Base_MspDeInitCallback = NULL; \ + (__HANDLE__)->IC_MspInitCallback = NULL; \ + (__HANDLE__)->IC_MspDeInitCallback = NULL; \ + (__HANDLE__)->OC_MspInitCallback = NULL; \ + (__HANDLE__)->OC_MspDeInitCallback = NULL; \ + (__HANDLE__)->PWM_MspInitCallback = NULL; \ + (__HANDLE__)->PWM_MspDeInitCallback = NULL; \ + (__HANDLE__)->OnePulse_MspInitCallback = NULL; \ + (__HANDLE__)->OnePulse_MspDeInitCallback = NULL; \ + (__HANDLE__)->Encoder_MspInitCallback = NULL; \ + (__HANDLE__)->Encoder_MspDeInitCallback = NULL; \ + (__HANDLE__)->HallSensor_MspInitCallback = NULL; \ + (__HANDLE__)->HallSensor_MspDeInitCallback = NULL; \ } while(0) #else -#define __HAL_TIM_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_TIM_STATE_RESET) +#define __HAL_TIM_RESET_HANDLE_STATE(__HANDLE__) do { \ + (__HANDLE__)->State = HAL_TIM_STATE_RESET; \ + (__HANDLE__)->ChannelState[0] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->ChannelState[1] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->ChannelState[2] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->ChannelState[3] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->ChannelNState[0] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->ChannelNState[1] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->ChannelNState[2] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->ChannelNState[3] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->DMABurstState = HAL_DMA_BURST_STATE_RESET; \ + } while(0) #endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ /** @@ -1048,7 +1091,8 @@ typedef void (*pTIM_CallbackTypeDef)(TIM_HandleTypeDef *htim); /*!< pointer to * @brief Disable the TIM main Output. * @param __HANDLE__ TIM handle * @retval None - * @note The Main Output Enable of a timer instance is disabled only if all the CCx and CCxN channels have been disabled + * @note The Main Output Enable of a timer instance is disabled only if all the CCx and CCxN channels have been + * disabled */ #define __HAL_TIM_MOE_DISABLE(__HANDLE__) \ do { \ @@ -1209,8 +1253,8 @@ typedef void (*pTIM_CallbackTypeDef)(TIM_HandleTypeDef *htim); /*!< pointer to * @brief Indicates whether or not the TIM Counter is used as downcounter. * @param __HANDLE__ TIM handle. * @retval False (Counter used as upcounter) or True (Counter used as downcounter) - * @note This macro is particularly useful to get the counting mode when the timer operates in Center-aligned mode or Encoder -mode. + * @note This macro is particularly useful to get the counting mode when the timer operates in Center-aligned mode + * or Encoder mode. */ #define __HAL_TIM_IS_TIM_COUNTING_DOWN(__HANDLE__) (((__HANDLE__)->Instance->CR1 &(TIM_CR1_DIR)) == (TIM_CR1_DIR)) @@ -1284,7 +1328,8 @@ mode. #define __HAL_TIM_GET_CLOCKDIVISION(__HANDLE__) ((__HANDLE__)->Instance->CR1 & TIM_CR1_CKD) /** - * @brief Set the TIM Input Capture prescaler on runtime without calling another time HAL_TIM_IC_ConfigChannel() function. + * @brief Set the TIM Input Capture prescaler on runtime without calling another time HAL_TIM_IC_ConfigChannel() + * function. * @param __HANDLE__ TIM handle. * @param __CHANNEL__ TIM Channels to be configured. * This parameter can be one of the following values: @@ -1710,15 +1755,15 @@ mode. #define IS_TIM_TI1SELECTION(__TI1SELECTION__) (((__TI1SELECTION__) == TIM_TI1SELECTION_CH1) || \ ((__TI1SELECTION__) == TIM_TI1SELECTION_XORCOMBINATION)) -#define IS_TIM_DMA_LENGTH(__LENGTH__) (((__LENGTH__) == TIM_DMABURSTLENGTH_1TRANSFER) || \ - ((__LENGTH__) == TIM_DMABURSTLENGTH_2TRANSFERS) || \ - ((__LENGTH__) == TIM_DMABURSTLENGTH_3TRANSFERS) || \ - ((__LENGTH__) == TIM_DMABURSTLENGTH_4TRANSFERS) || \ - ((__LENGTH__) == TIM_DMABURSTLENGTH_5TRANSFERS) || \ - ((__LENGTH__) == TIM_DMABURSTLENGTH_6TRANSFERS) || \ - ((__LENGTH__) == TIM_DMABURSTLENGTH_7TRANSFERS) || \ - ((__LENGTH__) == TIM_DMABURSTLENGTH_8TRANSFERS) || \ - ((__LENGTH__) == TIM_DMABURSTLENGTH_9TRANSFERS) || \ +#define IS_TIM_DMA_LENGTH(__LENGTH__) (((__LENGTH__) == TIM_DMABURSTLENGTH_1TRANSFER) || \ + ((__LENGTH__) == TIM_DMABURSTLENGTH_2TRANSFERS) || \ + ((__LENGTH__) == TIM_DMABURSTLENGTH_3TRANSFERS) || \ + ((__LENGTH__) == TIM_DMABURSTLENGTH_4TRANSFERS) || \ + ((__LENGTH__) == TIM_DMABURSTLENGTH_5TRANSFERS) || \ + ((__LENGTH__) == TIM_DMABURSTLENGTH_6TRANSFERS) || \ + ((__LENGTH__) == TIM_DMABURSTLENGTH_7TRANSFERS) || \ + ((__LENGTH__) == TIM_DMABURSTLENGTH_8TRANSFERS) || \ + ((__LENGTH__) == TIM_DMABURSTLENGTH_9TRANSFERS) || \ ((__LENGTH__) == TIM_DMABURSTLENGTH_10TRANSFERS) || \ ((__LENGTH__) == TIM_DMABURSTLENGTH_11TRANSFERS) || \ ((__LENGTH__) == TIM_DMABURSTLENGTH_12TRANSFERS) || \ @@ -1729,6 +1774,8 @@ mode. ((__LENGTH__) == TIM_DMABURSTLENGTH_17TRANSFERS) || \ ((__LENGTH__) == TIM_DMABURSTLENGTH_18TRANSFERS)) +#define IS_TIM_DMA_DATA_LENGTH(LENGTH) (((LENGTH) >= 0x1U) && ((LENGTH) < 0x10000U)) + #define IS_TIM_IC_FILTER(__ICFILTER__) ((__ICFILTER__) <= 0xFU) #define IS_TIM_DEADTIME(__DEADTIME__) ((__DEADTIME__) <= 0xFFU) @@ -1759,6 +1806,48 @@ mode. ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCER &= ~(TIM_CCER_CC3P | TIM_CCER_CC3NP)) :\ ((__HANDLE__)->Instance->CCER &= ~(TIM_CCER_CC4P | TIM_CCER_CC4NP))) +#define TIM_CHANNEL_STATE_GET(__HANDLE__, __CHANNEL__)\ + (((__CHANNEL__) == TIM_CHANNEL_1) ? (__HANDLE__)->ChannelState[0] :\ + ((__CHANNEL__) == TIM_CHANNEL_2) ? (__HANDLE__)->ChannelState[1] :\ + ((__CHANNEL__) == TIM_CHANNEL_3) ? (__HANDLE__)->ChannelState[2] :\ + (__HANDLE__)->ChannelState[3]) + +#define TIM_CHANNEL_STATE_SET(__HANDLE__, __CHANNEL__, __CHANNEL_STATE__) \ + (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->ChannelState[0] = (__CHANNEL_STATE__)) :\ + ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->ChannelState[1] = (__CHANNEL_STATE__)) :\ + ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->ChannelState[2] = (__CHANNEL_STATE__)) :\ + ((__HANDLE__)->ChannelState[3] = (__CHANNEL_STATE__))) + +#define TIM_CHANNEL_STATE_SET_ALL(__HANDLE__, __CHANNEL_STATE__) do { \ + (__HANDLE__)->ChannelState[0] = (__CHANNEL_STATE__); \ + (__HANDLE__)->ChannelState[1] = (__CHANNEL_STATE__); \ + (__HANDLE__)->ChannelState[2] = (__CHANNEL_STATE__); \ + (__HANDLE__)->ChannelState[3] = (__CHANNEL_STATE__); \ + } while(0) + +#define TIM_CHANNEL_N_STATE_GET(__HANDLE__, __CHANNEL__)\ + (((__CHANNEL__) == TIM_CHANNEL_1) ? (__HANDLE__)->ChannelNState[0] :\ + ((__CHANNEL__) == TIM_CHANNEL_2) ? (__HANDLE__)->ChannelNState[1] :\ + ((__CHANNEL__) == TIM_CHANNEL_3) ? (__HANDLE__)->ChannelNState[2] :\ + (__HANDLE__)->ChannelNState[3]) + +#define TIM_CHANNEL_N_STATE_SET(__HANDLE__, __CHANNEL__, __CHANNEL_STATE__) \ + (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->ChannelNState[0] = (__CHANNEL_STATE__)) :\ + ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->ChannelNState[1] = (__CHANNEL_STATE__)) :\ + ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->ChannelNState[2] = (__CHANNEL_STATE__)) :\ + ((__HANDLE__)->ChannelNState[3] = (__CHANNEL_STATE__))) + +#define TIM_CHANNEL_N_STATE_SET_ALL(__HANDLE__, __CHANNEL_STATE__) do { \ + (__HANDLE__)->ChannelNState[0] = \ + (__CHANNEL_STATE__); \ + (__HANDLE__)->ChannelNState[1] = \ + (__CHANNEL_STATE__); \ + (__HANDLE__)->ChannelNState[2] = \ + (__CHANNEL_STATE__); \ + (__HANDLE__)->ChannelNState[3] = \ + (__CHANNEL_STATE__); \ + } while(0) + /** * @} */ @@ -1930,9 +2019,15 @@ HAL_StatusTypeDef HAL_TIM_SlaveConfigSynchro(TIM_HandleTypeDef *htim, TIM_SlaveC HAL_StatusTypeDef HAL_TIM_SlaveConfigSynchro_IT(TIM_HandleTypeDef *htim, TIM_SlaveConfigTypeDef *sSlaveConfig); HAL_StatusTypeDef HAL_TIM_DMABurst_WriteStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, uint32_t BurstRequestSrc, uint32_t *BurstBuffer, uint32_t BurstLength); +HAL_StatusTypeDef HAL_TIM_DMABurst_MultiWriteStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, + uint32_t BurstRequestSrc, uint32_t *BurstBuffer, + uint32_t BurstLength, uint32_t DataLength); HAL_StatusTypeDef HAL_TIM_DMABurst_WriteStop(TIM_HandleTypeDef *htim, uint32_t BurstRequestSrc); HAL_StatusTypeDef HAL_TIM_DMABurst_ReadStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, uint32_t BurstRequestSrc, uint32_t *BurstBuffer, uint32_t BurstLength); +HAL_StatusTypeDef HAL_TIM_DMABurst_MultiReadStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, + uint32_t BurstRequestSrc, uint32_t *BurstBuffer, + uint32_t BurstLength, uint32_t DataLength); HAL_StatusTypeDef HAL_TIM_DMABurst_ReadStop(TIM_HandleTypeDef *htim, uint32_t BurstRequestSrc); HAL_StatusTypeDef HAL_TIM_GenerateEvent(TIM_HandleTypeDef *htim, uint32_t EventSource); uint32_t HAL_TIM_ReadCapturedValue(TIM_HandleTypeDef *htim, uint32_t Channel); @@ -1978,6 +2073,11 @@ HAL_TIM_StateTypeDef HAL_TIM_PWM_GetState(TIM_HandleTypeDef *htim); HAL_TIM_StateTypeDef HAL_TIM_IC_GetState(TIM_HandleTypeDef *htim); HAL_TIM_StateTypeDef HAL_TIM_OnePulse_GetState(TIM_HandleTypeDef *htim); HAL_TIM_StateTypeDef HAL_TIM_Encoder_GetState(TIM_HandleTypeDef *htim); + +/* Peripheral Channel state functions ************************************************/ +HAL_TIM_ActiveChannel HAL_TIM_GetActiveChannel(TIM_HandleTypeDef *htim); +HAL_TIM_ChannelStateTypeDef HAL_TIM_GetChannelState(TIM_HandleTypeDef *htim, uint32_t Channel); +HAL_TIM_DMABurstStateTypeDef HAL_TIM_DMABurstState(TIM_HandleTypeDef *htim); /** * @} */ @@ -1997,7 +2097,6 @@ void TIM_OC2_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config); void TIM_ETR_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ExtTRGPrescaler, uint32_t TIM_ExtTRGPolarity, uint32_t ExtTRGFilter); -void TIM_DMADelayPulseCplt(DMA_HandleTypeDef *hdma); void TIM_DMADelayPulseHalfCplt(DMA_HandleTypeDef *hdma); void TIM_DMAError(DMA_HandleTypeDef *hdma); void TIM_DMACaptureCplt(DMA_HandleTypeDef *hdma); diff --git a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_tim_ex.h b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_tim_ex.h index 2ffd2d7..f35eb3b 100644 --- a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_tim_ex.h +++ b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_tim_ex.h @@ -129,66 +129,66 @@ typedef struct * @{ */ #if defined(SPDIFRX) -#define IS_TIM_REMAP(INSTANCE, TIM_REMAP) \ - ((((INSTANCE) == TIM2) && (((TIM_REMAP) == TIM_TIM2_TIM8_TRGO) || \ - ((TIM_REMAP) == TIM_TIM2_USBFS_SOF) || \ - ((TIM_REMAP) == TIM_TIM2_USBHS_SOF))) || \ - (((INSTANCE) == TIM5) && (((TIM_REMAP) == TIM_TIM5_GPIO) || \ - ((TIM_REMAP) == TIM_TIM5_LSI) || \ - ((TIM_REMAP) == TIM_TIM5_LSE) || \ - ((TIM_REMAP) == TIM_TIM5_RTC))) || \ - (((INSTANCE) == TIM11) && (((TIM_REMAP) == TIM_TIM11_GPIO) || \ - ((TIM_REMAP) == TIM_TIM11_SPDIFRX) || \ - ((TIM_REMAP) == TIM_TIM11_HSE)))) +#define IS_TIM_REMAP(INSTANCE, TIM_REMAP) \ + ((((INSTANCE) == TIM2) && (((TIM_REMAP) == TIM_TIM2_TIM8_TRGO) || \ + ((TIM_REMAP) == TIM_TIM2_USBFS_SOF) || \ + ((TIM_REMAP) == TIM_TIM2_USBHS_SOF))) || \ + (((INSTANCE) == TIM5) && (((TIM_REMAP) == TIM_TIM5_GPIO) || \ + ((TIM_REMAP) == TIM_TIM5_LSI) || \ + ((TIM_REMAP) == TIM_TIM5_LSE) || \ + ((TIM_REMAP) == TIM_TIM5_RTC))) || \ + (((INSTANCE) == TIM11) && (((TIM_REMAP) == TIM_TIM11_GPIO) || \ + ((TIM_REMAP) == TIM_TIM11_SPDIFRX) || \ + ((TIM_REMAP) == TIM_TIM11_HSE)))) #elif defined(TIM2) #if defined(LPTIM_OR_TIM1_ITR2_RMP) && defined(LPTIM_OR_TIM5_ITR1_RMP) && defined(LPTIM_OR_TIM5_ITR1_RMP) -#define IS_TIM_REMAP(INSTANCE, TIM_REMAP) \ - ((((INSTANCE) == TIM2) && (((TIM_REMAP) == TIM_TIM2_TIM8_TRGO) || \ - ((TIM_REMAP) == TIM_TIM2_USBFS_SOF) || \ - ((TIM_REMAP) == TIM_TIM2_USBHS_SOF))) || \ - (((INSTANCE) == TIM5) && (((TIM_REMAP) == TIM_TIM5_GPIO) || \ - ((TIM_REMAP) == TIM_TIM5_LSI) || \ - ((TIM_REMAP) == TIM_TIM5_LSE) || \ - ((TIM_REMAP) == TIM_TIM5_RTC))) || \ - (((INSTANCE) == TIM11) && (((TIM_REMAP) == TIM_TIM11_GPIO) || \ - ((TIM_REMAP) == TIM_TIM11_HSE))) || \ - (((INSTANCE) == TIM1) && (((TIM_REMAP) == TIM_TIM1_TIM3_TRGO) || \ - ((TIM_REMAP) == TIM_TIM1_LPTIM))) || \ - (((INSTANCE) == TIM5) && (((TIM_REMAP) == TIM_TIM5_TIM3_TRGO) || \ - ((TIM_REMAP) == TIM_TIM5_LPTIM))) || \ - (((INSTANCE) == TIM9) && (((TIM_REMAP) == TIM_TIM9_TIM3_TRGO) || \ - ((TIM_REMAP) == TIM_TIM9_LPTIM)))) +#define IS_TIM_REMAP(INSTANCE, TIM_REMAP) \ + ((((INSTANCE) == TIM2) && (((TIM_REMAP) == TIM_TIM2_TIM8_TRGO) || \ + ((TIM_REMAP) == TIM_TIM2_USBFS_SOF) || \ + ((TIM_REMAP) == TIM_TIM2_USBHS_SOF))) || \ + (((INSTANCE) == TIM5) && (((TIM_REMAP) == TIM_TIM5_GPIO) || \ + ((TIM_REMAP) == TIM_TIM5_LSI) || \ + ((TIM_REMAP) == TIM_TIM5_LSE) || \ + ((TIM_REMAP) == TIM_TIM5_RTC))) || \ + (((INSTANCE) == TIM11) && (((TIM_REMAP) == TIM_TIM11_GPIO) || \ + ((TIM_REMAP) == TIM_TIM11_HSE))) || \ + (((INSTANCE) == TIM1) && (((TIM_REMAP) == TIM_TIM1_TIM3_TRGO) || \ + ((TIM_REMAP) == TIM_TIM1_LPTIM))) || \ + (((INSTANCE) == TIM5) && (((TIM_REMAP) == TIM_TIM5_TIM3_TRGO) || \ + ((TIM_REMAP) == TIM_TIM5_LPTIM))) || \ + (((INSTANCE) == TIM9) && (((TIM_REMAP) == TIM_TIM9_TIM3_TRGO) || \ + ((TIM_REMAP) == TIM_TIM9_LPTIM)))) #elif defined(TIM8) -#define IS_TIM_REMAP(INSTANCE, TIM_REMAP) \ - ((((INSTANCE) == TIM2) && (((TIM_REMAP) == TIM_TIM2_TIM8_TRGO) || \ - ((TIM_REMAP) == TIM_TIM2_USBFS_SOF) || \ - ((TIM_REMAP) == TIM_TIM2_USBHS_SOF))) || \ - (((INSTANCE) == TIM5) && (((TIM_REMAP) == TIM_TIM5_GPIO) || \ - ((TIM_REMAP) == TIM_TIM5_LSI) || \ - ((TIM_REMAP) == TIM_TIM5_LSE) || \ - ((TIM_REMAP) == TIM_TIM5_RTC))) || \ - (((INSTANCE) == TIM11) && (((TIM_REMAP) == TIM_TIM11_GPIO) || \ - ((TIM_REMAP) == TIM_TIM11_HSE)))) +#define IS_TIM_REMAP(INSTANCE, TIM_REMAP) \ + ((((INSTANCE) == TIM2) && (((TIM_REMAP) == TIM_TIM2_TIM8_TRGO) || \ + ((TIM_REMAP) == TIM_TIM2_USBFS_SOF) || \ + ((TIM_REMAP) == TIM_TIM2_USBHS_SOF))) || \ + (((INSTANCE) == TIM5) && (((TIM_REMAP) == TIM_TIM5_GPIO) || \ + ((TIM_REMAP) == TIM_TIM5_LSI) || \ + ((TIM_REMAP) == TIM_TIM5_LSE) || \ + ((TIM_REMAP) == TIM_TIM5_RTC))) || \ + (((INSTANCE) == TIM11) && (((TIM_REMAP) == TIM_TIM11_GPIO) || \ + ((TIM_REMAP) == TIM_TIM11_HSE)))) #else -#define IS_TIM_REMAP(INSTANCE, TIM_REMAP) \ - ((((INSTANCE) == TIM2) && (((TIM_REMAP) == TIM_TIM2_ETH_PTP) || \ - ((TIM_REMAP) == TIM_TIM2_USBFS_SOF) || \ - ((TIM_REMAP) == TIM_TIM2_USBHS_SOF))) || \ - (((INSTANCE) == TIM5) && (((TIM_REMAP) == TIM_TIM5_GPIO) || \ - ((TIM_REMAP) == TIM_TIM5_LSI) || \ - ((TIM_REMAP) == TIM_TIM5_LSE) || \ - ((TIM_REMAP) == TIM_TIM5_RTC))) || \ - (((INSTANCE) == TIM11) && (((TIM_REMAP) == TIM_TIM11_GPIO) || \ - ((TIM_REMAP) == TIM_TIM11_HSE)))) +#define IS_TIM_REMAP(INSTANCE, TIM_REMAP) \ + ((((INSTANCE) == TIM2) && (((TIM_REMAP) == TIM_TIM2_ETH_PTP) || \ + ((TIM_REMAP) == TIM_TIM2_USBFS_SOF) || \ + ((TIM_REMAP) == TIM_TIM2_USBHS_SOF))) || \ + (((INSTANCE) == TIM5) && (((TIM_REMAP) == TIM_TIM5_GPIO) || \ + ((TIM_REMAP) == TIM_TIM5_LSI) || \ + ((TIM_REMAP) == TIM_TIM5_LSE) || \ + ((TIM_REMAP) == TIM_TIM5_RTC))) || \ + (((INSTANCE) == TIM11) && (((TIM_REMAP) == TIM_TIM11_GPIO) || \ + ((TIM_REMAP) == TIM_TIM11_HSE)))) #endif /* LPTIM_OR_TIM1_ITR2_RMP && LPTIM_OR_TIM5_ITR1_RMP && LPTIM_OR_TIM5_ITR1_RMP */ #else -#define IS_TIM_REMAP(INSTANCE, TIM_REMAP) \ - ((((INSTANCE) == TIM5) && (((TIM_REMAP) == TIM_TIM5_GPIO) || \ - ((TIM_REMAP) == TIM_TIM5_LSI) || \ - ((TIM_REMAP) == TIM_TIM5_LSE) || \ - ((TIM_REMAP) == TIM_TIM5_RTC))) || \ - (((INSTANCE) == TIM11) && (((TIM_REMAP) == TIM_TIM11_GPIO) || \ - ((TIM_REMAP) == TIM_TIM11_HSE)))) +#define IS_TIM_REMAP(INSTANCE, TIM_REMAP) \ + ((((INSTANCE) == TIM5) && (((TIM_REMAP) == TIM_TIM5_GPIO) || \ + ((TIM_REMAP) == TIM_TIM5_LSI) || \ + ((TIM_REMAP) == TIM_TIM5_LSE) || \ + ((TIM_REMAP) == TIM_TIM5_RTC))) || \ + (((INSTANCE) == TIM11) && (((TIM_REMAP) == TIM_TIM11_GPIO) || \ + ((TIM_REMAP) == TIM_TIM11_HSE)))) #endif /* SPDIFRX */ /** @@ -318,6 +318,7 @@ void HAL_TIMEx_BreakCallback(TIM_HandleTypeDef *htim); */ /* Extended Peripheral State functions ***************************************/ HAL_TIM_StateTypeDef HAL_TIMEx_HallSensor_GetState(TIM_HandleTypeDef *htim); +HAL_TIM_ChannelStateTypeDef HAL_TIMEx_GetChannelNState(TIM_HandleTypeDef *htim, uint32_t ChannelN); /** * @} */ diff --git a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_cortex.h b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_cortex.h index 6d1309f..6835da3 100644 --- a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_cortex.h +++ b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_cortex.h @@ -10,7 +10,7 @@ [..] The LL CORTEX driver contains a set of generic APIs that can be used by user: - (+) SYSTICK configuration used by @ref LL_mDelay and @ref LL_Init1msTick + (+) SYSTICK configuration used by LL_mDelay and LL_Init1msTick functions (+) Low power mode configuration (SCB register of Cortex-MCU) (+) MPU API to configure and enable regions diff --git a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_dma.h b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_dma.h index 9deed88..1c6796c 100644 --- a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_dma.h +++ b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_dma.h @@ -285,14 +285,24 @@ typedef struct /** @defgroup DMA_LL_EC_CHANNEL CHANNEL * @{ */ -#define LL_DMA_CHANNEL_0 0x00000000U /* Select Channel0 of DMA Instance */ -#define LL_DMA_CHANNEL_1 DMA_SxCR_CHSEL_0 /* Select Channel1 of DMA Instance */ -#define LL_DMA_CHANNEL_2 DMA_SxCR_CHSEL_1 /* Select Channel2 of DMA Instance */ -#define LL_DMA_CHANNEL_3 (DMA_SxCR_CHSEL_0 | DMA_SxCR_CHSEL_1) /* Select Channel3 of DMA Instance */ -#define LL_DMA_CHANNEL_4 DMA_SxCR_CHSEL_2 /* Select Channel4 of DMA Instance */ -#define LL_DMA_CHANNEL_5 (DMA_SxCR_CHSEL_2 | DMA_SxCR_CHSEL_0) /* Select Channel5 of DMA Instance */ -#define LL_DMA_CHANNEL_6 (DMA_SxCR_CHSEL_2 | DMA_SxCR_CHSEL_1) /* Select Channel6 of DMA Instance */ -#define LL_DMA_CHANNEL_7 (DMA_SxCR_CHSEL_2 | DMA_SxCR_CHSEL_1 | DMA_SxCR_CHSEL_0) /* Select Channel7 of DMA Instance */ +#define LL_DMA_CHANNEL_0 0x00000000U /* Select Channel0 of DMA Instance */ +#define LL_DMA_CHANNEL_1 DMA_SxCR_CHSEL_0 /* Select Channel1 of DMA Instance */ +#define LL_DMA_CHANNEL_2 DMA_SxCR_CHSEL_1 /* Select Channel2 of DMA Instance */ +#define LL_DMA_CHANNEL_3 (DMA_SxCR_CHSEL_0 | DMA_SxCR_CHSEL_1) /* Select Channel3 of DMA Instance */ +#define LL_DMA_CHANNEL_4 DMA_SxCR_CHSEL_2 /* Select Channel4 of DMA Instance */ +#define LL_DMA_CHANNEL_5 (DMA_SxCR_CHSEL_2 | DMA_SxCR_CHSEL_0) /* Select Channel5 of DMA Instance */ +#define LL_DMA_CHANNEL_6 (DMA_SxCR_CHSEL_2 | DMA_SxCR_CHSEL_1) /* Select Channel6 of DMA Instance */ +#define LL_DMA_CHANNEL_7 (DMA_SxCR_CHSEL_2 | DMA_SxCR_CHSEL_1 | DMA_SxCR_CHSEL_0) /* Select Channel7 of DMA Instance */ +#if defined (DMA_SxCR_CHSEL_3) +#define LL_DMA_CHANNEL_8 DMA_SxCR_CHSEL_3 /* Select Channel8 of DMA Instance */ +#define LL_DMA_CHANNEL_9 (DMA_SxCR_CHSEL_3 | DMA_SxCR_CHSEL_0) /* Select Channel9 of DMA Instance */ +#define LL_DMA_CHANNEL_10 (DMA_SxCR_CHSEL_3 | DMA_SxCR_CHSEL_1) /* Select Channel10 of DMA Instance */ +#define LL_DMA_CHANNEL_11 (DMA_SxCR_CHSEL_3 | DMA_SxCR_CHSEL_1 | DMA_SxCR_CHSEL_0) /* Select Channel11 of DMA Instance */ +#define LL_DMA_CHANNEL_12 (DMA_SxCR_CHSEL_3 | DMA_SxCR_CHSEL_2) /* Select Channel12 of DMA Instance */ +#define LL_DMA_CHANNEL_13 (DMA_SxCR_CHSEL_3 | DMA_SxCR_CHSEL_2 | DMA_SxCR_CHSEL_0) /* Select Channel13 of DMA Instance */ +#define LL_DMA_CHANNEL_14 (DMA_SxCR_CHSEL_3 | DMA_SxCR_CHSEL_2 | DMA_SxCR_CHSEL_1) /* Select Channel14 of DMA Instance */ +#define LL_DMA_CHANNEL_15 (DMA_SxCR_CHSEL_3 | DMA_SxCR_CHSEL_2 | DMA_SxCR_CHSEL_1 | DMA_SxCR_CHSEL_0) /* Select Channel15 of DMA Instance */ +#endif /* DMA_SxCR_CHSEL_3 */ /** * @} */ diff --git a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_gpio.h b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_gpio.h index 51b0170..b3b850a 100644 --- a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_gpio.h +++ b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_gpio.h @@ -340,11 +340,10 @@ __STATIC_INLINE uint32_t LL_GPIO_GetPinMode(GPIO_TypeDef *GPIOx, uint32_t Pin) * @arg @ref LL_GPIO_OUTPUT_OPENDRAIN * @retval None */ -__STATIC_INLINE void LL_GPIO_SetPinOutputType(GPIO_TypeDef *GPIOx, uint32_t Pin, uint32_t OutputType) +__STATIC_INLINE void LL_GPIO_SetPinOutputType(GPIO_TypeDef *GPIOx, uint32_t PinMask, uint32_t OutputType) { - MODIFY_REG(GPIOx->OTYPER, (GPIO_OTYPER_OT_0 << POSITION_VAL(Pin)), (OutputType << POSITION_VAL(Pin))); + MODIFY_REG(GPIOx->OTYPER, PinMask, (PinMask * OutputType)); } - /** * @brief Return gpio output type for several pins on dedicated port. @@ -940,7 +939,8 @@ __STATIC_INLINE void LL_GPIO_ResetOutputPin(GPIO_TypeDef *GPIOx, uint32_t PinMas */ __STATIC_INLINE void LL_GPIO_TogglePin(GPIO_TypeDef *GPIOx, uint32_t PinMask) { - WRITE_REG(GPIOx->ODR, READ_REG(GPIOx->ODR) ^ PinMask); + uint32_t odr = READ_REG(GPIOx->ODR); + WRITE_REG(GPIOx->BSRR, ((odr & PinMask) << 16u) | (~odr & PinMask)); } /** diff --git a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_rcc.h b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_rcc.h index be91a01..ef3d88c 100644 --- a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_rcc.h +++ b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_rcc.h @@ -5338,7 +5338,7 @@ __STATIC_INLINE uint32_t LL_RCC_PLLI2S_IsReady(void) */ __STATIC_INLINE void LL_RCC_PLLI2S_ConfigDomain_SAI(uint32_t Source, uint32_t PLLM, uint32_t PLLN, uint32_t PLLQ_R, uint32_t PLLDIVQ_R) { - register __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&RCC->PLLCFGR) + (Source & 0x80U))); + __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&RCC->PLLCFGR) + (Source & 0x80U))); MODIFY_REG(*pReg, RCC_PLLCFGR_PLLSRC, (Source & (~0x80U))); #if defined(RCC_PLLI2SCFGR_PLLI2SM) MODIFY_REG(RCC->PLLI2SCFGR, RCC_PLLI2SCFGR_PLLI2SM, PLLM); @@ -5458,7 +5458,7 @@ __STATIC_INLINE void LL_RCC_PLLI2S_ConfigDomain_SAI(uint32_t Source, uint32_t PL */ __STATIC_INLINE void LL_RCC_PLLI2S_ConfigDomain_48M(uint32_t Source, uint32_t PLLM, uint32_t PLLN, uint32_t PLLQ) { - register __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&RCC->PLLCFGR) + (Source & 0x80U))); + __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&RCC->PLLCFGR) + (Source & 0x80U))); MODIFY_REG(*pReg, RCC_PLLCFGR_PLLSRC, (Source & (~0x80U))); #if defined(RCC_PLLI2SCFGR_PLLI2SM) MODIFY_REG(RCC->PLLI2SCFGR, RCC_PLLI2SCFGR_PLLI2SM, PLLM); @@ -5662,7 +5662,7 @@ __STATIC_INLINE void LL_RCC_PLLI2S_ConfigDomain_SPDIFRX(uint32_t Source, uint32_ */ __STATIC_INLINE void LL_RCC_PLLI2S_ConfigDomain_I2S(uint32_t Source, uint32_t PLLM, uint32_t PLLN, uint32_t PLLR) { - register __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&RCC->PLLCFGR) + (Source & 0x80U))); + __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&RCC->PLLCFGR) + (Source & 0x80U))); MODIFY_REG(*pReg, RCC_PLLCFGR_PLLSRC, (Source & (~0x80U))); #if defined(RCC_PLLI2SCFGR_PLLI2SM) MODIFY_REG(RCC->PLLI2SCFGR, RCC_PLLI2SCFGR_PLLI2SM, PLLM); @@ -5924,9 +5924,9 @@ __STATIC_INLINE uint32_t LL_RCC_PLLI2S_GetDivider(void) __STATIC_INLINE uint32_t LL_RCC_PLLI2S_GetMainSource(void) { #if defined(RCC_PLLI2SCFGR_PLLI2SSRC) - register uint32_t pllsrc = READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC); - register uint32_t plli2sssrc0 = READ_BIT(RCC->PLLI2SCFGR, RCC_PLLI2SCFGR_PLLI2SSRC); - register uint32_t plli2sssrc1 = READ_BIT(RCC->PLLI2SCFGR, RCC_PLLI2SCFGR_PLLI2SSRC) >> 15U; + uint32_t pllsrc = READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC); + uint32_t plli2sssrc0 = READ_BIT(RCC->PLLI2SCFGR, RCC_PLLI2SCFGR_PLLI2SSRC); + uint32_t plli2sssrc1 = READ_BIT(RCC->PLLI2SCFGR, RCC_PLLI2SCFGR_PLLI2SSRC) >> 15U; return (uint32_t)(pllsrc | plli2sssrc0 | plli2sssrc1); #else return (uint32_t)(READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC)); diff --git a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_spi.h b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_spi.h index 0c54ef6..9361f00 100644 --- a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_spi.h +++ b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_spi.h @@ -710,8 +710,8 @@ __STATIC_INLINE void LL_SPI_SetNSSMode(SPI_TypeDef *SPIx, uint32_t NSS) */ __STATIC_INLINE uint32_t LL_SPI_GetNSSMode(SPI_TypeDef *SPIx) { - register uint32_t Ssm = (READ_BIT(SPIx->CR1, SPI_CR1_SSM)); - register uint32_t Ssoe = (READ_BIT(SPIx->CR2, SPI_CR2_SSOE) << 16U); + uint32_t Ssm = (READ_BIT(SPIx->CR1, SPI_CR1_SSM)); + uint32_t Ssoe = (READ_BIT(SPIx->CR2, SPI_CR2_SSOE) << 16U); return (Ssm | Ssoe); } @@ -1075,7 +1075,7 @@ __STATIC_INLINE uint32_t LL_SPI_DMA_GetRegAddr(SPI_TypeDef *SPIx) */ __STATIC_INLINE uint8_t LL_SPI_ReceiveData8(SPI_TypeDef *SPIx) { - return (uint8_t)(READ_REG(SPIx->DR)); + return (*((__IO uint8_t *)&SPIx->DR)); } /** @@ -1242,10 +1242,10 @@ typedef struct /** @defgroup I2S_LL_EC_DATA_FORMAT Data format * @{ */ -#define LL_I2S_DATAFORMAT_16B 0x00000000U /*!< Data length 16 bits, Channel lenght 16bit */ -#define LL_I2S_DATAFORMAT_16B_EXTENDED (SPI_I2SCFGR_CHLEN) /*!< Data length 16 bits, Channel lenght 32bit */ -#define LL_I2S_DATAFORMAT_24B (SPI_I2SCFGR_CHLEN | SPI_I2SCFGR_DATLEN_0) /*!< Data length 24 bits, Channel lenght 32bit */ -#define LL_I2S_DATAFORMAT_32B (SPI_I2SCFGR_CHLEN | SPI_I2SCFGR_DATLEN_1) /*!< Data length 16 bits, Channel lenght 32bit */ +#define LL_I2S_DATAFORMAT_16B 0x00000000U /*!< Data length 16 bits, Channel length 16bit */ +#define LL_I2S_DATAFORMAT_16B_EXTENDED (SPI_I2SCFGR_CHLEN) /*!< Data length 16 bits, Channel length 32bit */ +#define LL_I2S_DATAFORMAT_24B (SPI_I2SCFGR_CHLEN | SPI_I2SCFGR_DATLEN_0) /*!< Data length 24 bits, Channel length 32bit */ +#define LL_I2S_DATAFORMAT_32B (SPI_I2SCFGR_CHLEN | SPI_I2SCFGR_DATLEN_1) /*!< Data length 16 bits, Channel length 32bit */ /** * @} */ @@ -1580,7 +1580,7 @@ __STATIC_INLINE uint32_t LL_I2S_GetPrescalerParity(SPI_TypeDef *SPIx) } /** - * @brief Enable the master clock ouput (Pin MCK) + * @brief Enable the master clock output (Pin MCK) * @rmtoll I2SPR MCKOE LL_I2S_EnableMasterClock * @param SPIx SPI Instance * @retval None @@ -1591,7 +1591,7 @@ __STATIC_INLINE void LL_I2S_EnableMasterClock(SPI_TypeDef *SPIx) } /** - * @brief Disable the master clock ouput (Pin MCK) + * @brief Disable the master clock output (Pin MCK) * @rmtoll I2SPR MCKOE LL_I2S_DisableMasterClock * @param SPIx SPI Instance * @retval None @@ -1602,7 +1602,7 @@ __STATIC_INLINE void LL_I2S_DisableMasterClock(SPI_TypeDef *SPIx) } /** - * @brief Check if the master clock ouput (Pin MCK) is enabled + * @brief Check if the master clock output (Pin MCK) is enabled * @rmtoll I2SPR MCKOE LL_I2S_IsEnabledMasterClock * @param SPIx SPI Instance * @retval State of bit (1 or 0). diff --git a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_usart.h b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_usart.h index 409c0f3..13ea650 100644 --- a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_usart.h +++ b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_usart.h @@ -359,11 +359,12 @@ typedef struct */ #define __LL_USART_DIV_SAMPLING8_100(__PERIPHCLK__, __BAUDRATE__) ((uint32_t)((((uint64_t)(__PERIPHCLK__))*25)/(2*((uint64_t)(__BAUDRATE__))))) #define __LL_USART_DIVMANT_SAMPLING8(__PERIPHCLK__, __BAUDRATE__) (__LL_USART_DIV_SAMPLING8_100((__PERIPHCLK__), (__BAUDRATE__))/100) -#define __LL_USART_DIVFRAQ_SAMPLING8(__PERIPHCLK__, __BAUDRATE__) ((((__LL_USART_DIV_SAMPLING8_100((__PERIPHCLK__), (__BAUDRATE__)) - (__LL_USART_DIVMANT_SAMPLING8((__PERIPHCLK__), (__BAUDRATE__)) * 100)) * 8) + 50) / 100) +#define __LL_USART_DIVFRAQ_SAMPLING8(__PERIPHCLK__, __BAUDRATE__) ((((__LL_USART_DIV_SAMPLING8_100((__PERIPHCLK__), (__BAUDRATE__)) - (__LL_USART_DIVMANT_SAMPLING8((__PERIPHCLK__), (__BAUDRATE__)) * 100)) * 8)\ + + 50) / 100) /* UART BRR = mantissa + overflow + fraction = (UART DIVMANT << 4) + ((UART DIVFRAQ & 0xF8) << 1) + (UART DIVFRAQ & 0x07) */ #define __LL_USART_DIV_SAMPLING8(__PERIPHCLK__, __BAUDRATE__) (((__LL_USART_DIVMANT_SAMPLING8((__PERIPHCLK__), (__BAUDRATE__)) << 4) + \ - ((__LL_USART_DIVFRAQ_SAMPLING8((__PERIPHCLK__), (__BAUDRATE__)) & 0xF8) << 1)) + \ + ((__LL_USART_DIVFRAQ_SAMPLING8((__PERIPHCLK__), (__BAUDRATE__)) & 0xF8) << 1)) + \ (__LL_USART_DIVFRAQ_SAMPLING8((__PERIPHCLK__), (__BAUDRATE__)) & 0x07)) /** @@ -375,11 +376,12 @@ typedef struct */ #define __LL_USART_DIV_SAMPLING16_100(__PERIPHCLK__, __BAUDRATE__) ((uint32_t)((((uint64_t)(__PERIPHCLK__))*25)/(4*((uint64_t)(__BAUDRATE__))))) #define __LL_USART_DIVMANT_SAMPLING16(__PERIPHCLK__, __BAUDRATE__) (__LL_USART_DIV_SAMPLING16_100((__PERIPHCLK__), (__BAUDRATE__))/100) -#define __LL_USART_DIVFRAQ_SAMPLING16(__PERIPHCLK__, __BAUDRATE__) ((((__LL_USART_DIV_SAMPLING16_100((__PERIPHCLK__), (__BAUDRATE__)) - (__LL_USART_DIVMANT_SAMPLING16((__PERIPHCLK__), (__BAUDRATE__)) * 100)) * 16) + 50) / 100) +#define __LL_USART_DIVFRAQ_SAMPLING16(__PERIPHCLK__, __BAUDRATE__) ((((__LL_USART_DIV_SAMPLING16_100((__PERIPHCLK__), (__BAUDRATE__)) - (__LL_USART_DIVMANT_SAMPLING16((__PERIPHCLK__), (__BAUDRATE__)) * 100)) * 16)\ + + 50) / 100) /* USART BRR = mantissa + overflow + fraction = (USART DIVMANT << 4) + (USART DIVFRAQ & 0xF0) + (USART DIVFRAQ & 0x0F) */ #define __LL_USART_DIV_SAMPLING16(__PERIPHCLK__, __BAUDRATE__) (((__LL_USART_DIVMANT_SAMPLING16((__PERIPHCLK__), (__BAUDRATE__)) << 4) + \ - (__LL_USART_DIVFRAQ_SAMPLING16((__PERIPHCLK__), (__BAUDRATE__)) & 0xF0)) + \ + (__LL_USART_DIVFRAQ_SAMPLING16((__PERIPHCLK__), (__BAUDRATE__)) & 0xF0)) + \ (__LL_USART_DIVFRAQ_SAMPLING16((__PERIPHCLK__), (__BAUDRATE__)) & 0x0F)) /** @@ -444,7 +446,7 @@ __STATIC_INLINE uint32_t LL_USART_IsEnabled(USART_TypeDef *USARTx) */ __STATIC_INLINE void LL_USART_EnableDirectionRx(USART_TypeDef *USARTx) { - SET_BIT(USARTx->CR1, USART_CR1_RE); + ATOMIC_SET_BIT(USARTx->CR1, USART_CR1_RE); } /** @@ -455,7 +457,7 @@ __STATIC_INLINE void LL_USART_EnableDirectionRx(USART_TypeDef *USARTx) */ __STATIC_INLINE void LL_USART_DisableDirectionRx(USART_TypeDef *USARTx) { - CLEAR_BIT(USARTx->CR1, USART_CR1_RE); + ATOMIC_CLEAR_BIT(USARTx->CR1, USART_CR1_RE); } /** @@ -466,7 +468,7 @@ __STATIC_INLINE void LL_USART_DisableDirectionRx(USART_TypeDef *USARTx) */ __STATIC_INLINE void LL_USART_EnableDirectionTx(USART_TypeDef *USARTx) { - SET_BIT(USARTx->CR1, USART_CR1_TE); + ATOMIC_SET_BIT(USARTx->CR1, USART_CR1_TE); } /** @@ -477,7 +479,7 @@ __STATIC_INLINE void LL_USART_EnableDirectionTx(USART_TypeDef *USARTx) */ __STATIC_INLINE void LL_USART_DisableDirectionTx(USART_TypeDef *USARTx) { - CLEAR_BIT(USARTx->CR1, USART_CR1_TE); + ATOMIC_CLEAR_BIT(USARTx->CR1, USART_CR1_TE); } /** @@ -495,7 +497,7 @@ __STATIC_INLINE void LL_USART_DisableDirectionTx(USART_TypeDef *USARTx) */ __STATIC_INLINE void LL_USART_SetTransferDirection(USART_TypeDef *USARTx, uint32_t TransferDirection) { - MODIFY_REG(USARTx->CR1, USART_CR1_RE | USART_CR1_TE, TransferDirection); + ATOMIC_MODIFY_REG(USARTx->CR1, USART_CR1_RE | USART_CR1_TE, TransferDirection); } /** @@ -1043,8 +1045,8 @@ __STATIC_INLINE void LL_USART_SetBaudRate(USART_TypeDef *USARTx, uint32_t Periph */ __STATIC_INLINE uint32_t LL_USART_GetBaudRate(USART_TypeDef *USARTx, uint32_t PeriphClk, uint32_t OverSampling) { - register uint32_t usartdiv = 0x0U; - register uint32_t brrresult = 0x0U; + uint32_t usartdiv = 0x0U; + uint32_t brrresult = 0x0U; usartdiv = USARTx->BRR; @@ -2022,7 +2024,7 @@ __STATIC_INLINE void LL_USART_ClearFlag_nCTS(USART_TypeDef *USARTx) */ __STATIC_INLINE void LL_USART_EnableIT_IDLE(USART_TypeDef *USARTx) { - SET_BIT(USARTx->CR1, USART_CR1_IDLEIE); + ATOMIC_SET_BIT(USARTx->CR1, USART_CR1_IDLEIE); } /** @@ -2033,7 +2035,7 @@ __STATIC_INLINE void LL_USART_EnableIT_IDLE(USART_TypeDef *USARTx) */ __STATIC_INLINE void LL_USART_EnableIT_RXNE(USART_TypeDef *USARTx) { - SET_BIT(USARTx->CR1, USART_CR1_RXNEIE); + ATOMIC_SET_BIT(USARTx->CR1, USART_CR1_RXNEIE); } /** @@ -2044,7 +2046,7 @@ __STATIC_INLINE void LL_USART_EnableIT_RXNE(USART_TypeDef *USARTx) */ __STATIC_INLINE void LL_USART_EnableIT_TC(USART_TypeDef *USARTx) { - SET_BIT(USARTx->CR1, USART_CR1_TCIE); + ATOMIC_SET_BIT(USARTx->CR1, USART_CR1_TCIE); } /** @@ -2055,7 +2057,7 @@ __STATIC_INLINE void LL_USART_EnableIT_TC(USART_TypeDef *USARTx) */ __STATIC_INLINE void LL_USART_EnableIT_TXE(USART_TypeDef *USARTx) { - SET_BIT(USARTx->CR1, USART_CR1_TXEIE); + ATOMIC_SET_BIT(USARTx->CR1, USART_CR1_TXEIE); } /** @@ -2066,7 +2068,7 @@ __STATIC_INLINE void LL_USART_EnableIT_TXE(USART_TypeDef *USARTx) */ __STATIC_INLINE void LL_USART_EnableIT_PE(USART_TypeDef *USARTx) { - SET_BIT(USARTx->CR1, USART_CR1_PEIE); + ATOMIC_SET_BIT(USARTx->CR1, USART_CR1_PEIE); } /** @@ -2094,7 +2096,7 @@ __STATIC_INLINE void LL_USART_EnableIT_LBD(USART_TypeDef *USARTx) */ __STATIC_INLINE void LL_USART_EnableIT_ERROR(USART_TypeDef *USARTx) { - SET_BIT(USARTx->CR3, USART_CR3_EIE); + ATOMIC_SET_BIT(USARTx->CR3, USART_CR3_EIE); } /** @@ -2107,7 +2109,7 @@ __STATIC_INLINE void LL_USART_EnableIT_ERROR(USART_TypeDef *USARTx) */ __STATIC_INLINE void LL_USART_EnableIT_CTS(USART_TypeDef *USARTx) { - SET_BIT(USARTx->CR3, USART_CR3_CTSIE); + ATOMIC_SET_BIT(USARTx->CR3, USART_CR3_CTSIE); } /** @@ -2118,7 +2120,7 @@ __STATIC_INLINE void LL_USART_EnableIT_CTS(USART_TypeDef *USARTx) */ __STATIC_INLINE void LL_USART_DisableIT_IDLE(USART_TypeDef *USARTx) { - CLEAR_BIT(USARTx->CR1, USART_CR1_IDLEIE); + ATOMIC_CLEAR_BIT(USARTx->CR1, USART_CR1_IDLEIE); } /** @@ -2129,7 +2131,7 @@ __STATIC_INLINE void LL_USART_DisableIT_IDLE(USART_TypeDef *USARTx) */ __STATIC_INLINE void LL_USART_DisableIT_RXNE(USART_TypeDef *USARTx) { - CLEAR_BIT(USARTx->CR1, USART_CR1_RXNEIE); + ATOMIC_CLEAR_BIT(USARTx->CR1, USART_CR1_RXNEIE); } /** @@ -2140,7 +2142,7 @@ __STATIC_INLINE void LL_USART_DisableIT_RXNE(USART_TypeDef *USARTx) */ __STATIC_INLINE void LL_USART_DisableIT_TC(USART_TypeDef *USARTx) { - CLEAR_BIT(USARTx->CR1, USART_CR1_TCIE); + ATOMIC_CLEAR_BIT(USARTx->CR1, USART_CR1_TCIE); } /** @@ -2151,7 +2153,7 @@ __STATIC_INLINE void LL_USART_DisableIT_TC(USART_TypeDef *USARTx) */ __STATIC_INLINE void LL_USART_DisableIT_TXE(USART_TypeDef *USARTx) { - CLEAR_BIT(USARTx->CR1, USART_CR1_TXEIE); + ATOMIC_CLEAR_BIT(USARTx->CR1, USART_CR1_TXEIE); } /** @@ -2162,7 +2164,7 @@ __STATIC_INLINE void LL_USART_DisableIT_TXE(USART_TypeDef *USARTx) */ __STATIC_INLINE void LL_USART_DisableIT_PE(USART_TypeDef *USARTx) { - CLEAR_BIT(USARTx->CR1, USART_CR1_PEIE); + ATOMIC_CLEAR_BIT(USARTx->CR1, USART_CR1_PEIE); } /** @@ -2190,7 +2192,7 @@ __STATIC_INLINE void LL_USART_DisableIT_LBD(USART_TypeDef *USARTx) */ __STATIC_INLINE void LL_USART_DisableIT_ERROR(USART_TypeDef *USARTx) { - CLEAR_BIT(USARTx->CR3, USART_CR3_EIE); + ATOMIC_CLEAR_BIT(USARTx->CR3, USART_CR3_EIE); } /** @@ -2203,7 +2205,7 @@ __STATIC_INLINE void LL_USART_DisableIT_ERROR(USART_TypeDef *USARTx) */ __STATIC_INLINE void LL_USART_DisableIT_CTS(USART_TypeDef *USARTx) { - CLEAR_BIT(USARTx->CR3, USART_CR3_CTSIE); + ATOMIC_CLEAR_BIT(USARTx->CR3, USART_CR3_CTSIE); } /** @@ -2314,7 +2316,7 @@ __STATIC_INLINE uint32_t LL_USART_IsEnabledIT_CTS(USART_TypeDef *USARTx) */ __STATIC_INLINE void LL_USART_EnableDMAReq_RX(USART_TypeDef *USARTx) { - SET_BIT(USARTx->CR3, USART_CR3_DMAR); + ATOMIC_SET_BIT(USARTx->CR3, USART_CR3_DMAR); } /** @@ -2325,7 +2327,7 @@ __STATIC_INLINE void LL_USART_EnableDMAReq_RX(USART_TypeDef *USARTx) */ __STATIC_INLINE void LL_USART_DisableDMAReq_RX(USART_TypeDef *USARTx) { - CLEAR_BIT(USARTx->CR3, USART_CR3_DMAR); + ATOMIC_CLEAR_BIT(USARTx->CR3, USART_CR3_DMAR); } /** @@ -2347,7 +2349,7 @@ __STATIC_INLINE uint32_t LL_USART_IsEnabledDMAReq_RX(USART_TypeDef *USARTx) */ __STATIC_INLINE void LL_USART_EnableDMAReq_TX(USART_TypeDef *USARTx) { - SET_BIT(USARTx->CR3, USART_CR3_DMAT); + ATOMIC_SET_BIT(USARTx->CR3, USART_CR3_DMAT); } /** @@ -2358,7 +2360,7 @@ __STATIC_INLINE void LL_USART_EnableDMAReq_TX(USART_TypeDef *USARTx) */ __STATIC_INLINE void LL_USART_DisableDMAReq_TX(USART_TypeDef *USARTx) { - CLEAR_BIT(USARTx->CR3, USART_CR3_DMAT); + ATOMIC_CLEAR_BIT(USARTx->CR3, USART_CR3_DMAT); } /** @@ -2382,7 +2384,7 @@ __STATIC_INLINE uint32_t LL_USART_IsEnabledDMAReq_TX(USART_TypeDef *USARTx) __STATIC_INLINE uint32_t LL_USART_DMA_GetRegAddr(USART_TypeDef *USARTx) { /* return address of DR register */ - return ((uint32_t) & (USARTx->DR)); + return ((uint32_t) &(USARTx->DR)); } /** diff --git a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_utils.h b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_utils.h index 0db0fa9..9deeb32 100644 --- a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_utils.h +++ b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_utils.h @@ -279,6 +279,7 @@ void LL_mDelay(uint32_t Delay); */ void LL_SetSystemCoreClock(uint32_t HCLKFrequency); +ErrorStatus LL_SetFlashLatency(uint32_t HCLK_Frequency); ErrorStatus LL_PLL_ConfigSystemClock_HSI(LL_UTILS_PLLInitTypeDef *UTILS_PLLInitStruct, LL_UTILS_ClkInitTypeDef *UTILS_ClkInitStruct); ErrorStatus LL_PLL_ConfigSystemClock_HSE(uint32_t HSEFrequency, uint32_t HSEBypass, diff --git a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal.c b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal.c index e73822f..08f3ba5 100644 --- a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal.c +++ b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal.c @@ -50,11 +50,11 @@ * @{ */ /** - * @brief STM32F4xx HAL Driver version number V1.7.7 + * @brief STM32F4xx HAL Driver version number V1.7.13 */ #define __STM32F4xx_HAL_VERSION_MAIN (0x01U) /*!< [31:24] main version */ #define __STM32F4xx_HAL_VERSION_SUB1 (0x07U) /*!< [23:16] sub1 version */ -#define __STM32F4xx_HAL_VERSION_SUB2 (0x07U) /*!< [15:8] sub2 version */ +#define __STM32F4xx_HAL_VERSION_SUB2 (0x0DU) /*!< [15:8] sub2 version */ #define __STM32F4xx_HAL_VERSION_RC (0x00U) /*!< [7:0] release candidate */ #define __STM32F4xx_HAL_VERSION ((__STM32F4xx_HAL_VERSION_MAIN << 24U)\ |(__STM32F4xx_HAL_VERSION_SUB1 << 16U)\ diff --git a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_dma.c b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_dma.c index 281f9c2..aafd771 100644 --- a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_dma.c +++ b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_dma.c @@ -199,12 +199,12 @@ HAL_StatusTypeDef HAL_DMA_Init(DMA_HandleTypeDef *hdma) assert_param(IS_DMA_MEMORY_BURST(hdma->Init.MemBurst)); assert_param(IS_DMA_PERIPHERAL_BURST(hdma->Init.PeriphBurst)); } - - /* Allocate lock resource */ - __HAL_UNLOCK(hdma); /* Change DMA peripheral state */ hdma->State = HAL_DMA_STATE_BUSY; + + /* Allocate lock resource */ + __HAL_UNLOCK(hdma); /* Disable the peripheral */ __HAL_DMA_DISABLE(hdma); @@ -550,12 +550,12 @@ HAL_StatusTypeDef HAL_DMA_Abort(DMA_HandleTypeDef *hdma) /* Update error code */ hdma->ErrorCode = HAL_DMA_ERROR_TIMEOUT; - /* Process Unlocked */ - __HAL_UNLOCK(hdma); - /* Change the DMA state */ hdma->State = HAL_DMA_STATE_TIMEOUT; + /* Process Unlocked */ + __HAL_UNLOCK(hdma); + return HAL_TIMEOUT; } } @@ -563,11 +563,11 @@ HAL_StatusTypeDef HAL_DMA_Abort(DMA_HandleTypeDef *hdma) /* Clear all interrupt flags at correct offset within the register */ regs->IFCR = 0x3FU << hdma->StreamIndex; - /* Process Unlocked */ - __HAL_UNLOCK(hdma); - /* Change the DMA state*/ hdma->State = HAL_DMA_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hdma); } return HAL_OK; } @@ -657,13 +657,13 @@ HAL_StatusTypeDef HAL_DMA_PollForTransfer(DMA_HandleTypeDef *hdma, HAL_DMA_Level { /* Update error code */ hdma->ErrorCode = HAL_DMA_ERROR_TIMEOUT; - - /* Process Unlocked */ - __HAL_UNLOCK(hdma); /* Change the DMA state */ hdma->State = HAL_DMA_STATE_READY; + /* Process Unlocked */ + __HAL_UNLOCK(hdma); + return HAL_TIMEOUT; } } @@ -708,12 +708,12 @@ HAL_StatusTypeDef HAL_DMA_PollForTransfer(DMA_HandleTypeDef *hdma, HAL_DMA_Level /* Clear the half transfer and transfer complete flags */ regs->IFCR = (DMA_FLAG_HTIF0_4 | DMA_FLAG_TCIF0_4) << hdma->StreamIndex; - /* Process Unlocked */ - __HAL_UNLOCK(hdma); - /* Change the DMA state */ hdma->State= HAL_DMA_STATE_READY; + /* Process Unlocked */ + __HAL_UNLOCK(hdma); + return HAL_ERROR; } } @@ -724,10 +724,10 @@ HAL_StatusTypeDef HAL_DMA_PollForTransfer(DMA_HandleTypeDef *hdma, HAL_DMA_Level /* Clear the half transfer and transfer complete flags */ regs->IFCR = (DMA_FLAG_HTIF0_4 | DMA_FLAG_TCIF0_4) << hdma->StreamIndex; + hdma->State = HAL_DMA_STATE_READY; + /* Process Unlocked */ __HAL_UNLOCK(hdma); - - hdma->State = HAL_DMA_STATE_READY; } else { @@ -863,12 +863,12 @@ void HAL_DMA_IRQHandler(DMA_HandleTypeDef *hdma) /* Clear all interrupt flags at correct offset within the register */ regs->IFCR = 0x3FU << hdma->StreamIndex; - /* Process Unlocked */ - __HAL_UNLOCK(hdma); - /* Change the DMA state */ hdma->State = HAL_DMA_STATE_READY; + /* Process Unlocked */ + __HAL_UNLOCK(hdma); + if(hdma->XferAbortCallback != NULL) { hdma->XferAbortCallback(hdma); @@ -905,11 +905,11 @@ void HAL_DMA_IRQHandler(DMA_HandleTypeDef *hdma) /* Disable the transfer complete interrupt */ hdma->Instance->CR &= ~(DMA_IT_TC); - /* Process Unlocked */ - __HAL_UNLOCK(hdma); - /* Change the DMA state */ hdma->State = HAL_DMA_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hdma); } if(hdma->XferCpltCallback != NULL) @@ -940,11 +940,11 @@ void HAL_DMA_IRQHandler(DMA_HandleTypeDef *hdma) } while((hdma->Instance->CR & DMA_SxCR_EN) != RESET); - /* Process Unlocked */ - __HAL_UNLOCK(hdma); - /* Change the DMA state */ hdma->State = HAL_DMA_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hdma); } if(hdma->XferErrorCallback != NULL) diff --git a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_exti.c b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_exti.c index 6bed5d5..3e2204c 100644 --- a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_exti.c +++ b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_exti.c @@ -276,6 +276,10 @@ HAL_StatusTypeDef HAL_EXTI_GetConfigLine(EXTI_HandleTypeDef *hexti, EXTI_ConfigT pExtiConfig->Mode |= EXTI_MODE_EVENT; } + /* Get default Trigger and GPIOSel configuration */ + pExtiConfig->Trigger = EXTI_TRIGGER_NONE; + pExtiConfig->GPIOSel = 0x00u; + /* 2] Get trigger for configurable lines : rising */ if ((pExtiConfig->Line & EXTI_CONFIG) != 0x00u) { @@ -284,10 +288,6 @@ HAL_StatusTypeDef HAL_EXTI_GetConfigLine(EXTI_HandleTypeDef *hexti, EXTI_ConfigT { pExtiConfig->Trigger = EXTI_TRIGGER_RISING; } - else - { - pExtiConfig->Trigger = EXTI_TRIGGER_NONE; - } /* Get falling configuration */ /* Check if configuration of selected line is enable */ @@ -304,16 +304,6 @@ HAL_StatusTypeDef HAL_EXTI_GetConfigLine(EXTI_HandleTypeDef *hexti, EXTI_ConfigT regval = SYSCFG->EXTICR[linepos >> 2u]; pExtiConfig->GPIOSel = ((regval << (SYSCFG_EXTICR1_EXTI1_Pos * (3uL - (linepos & 0x03u)))) >> 24); } - else - { - pExtiConfig->GPIOSel = 0x00u; - } - } - else - { - /* No Trigger selected */ - pExtiConfig->Trigger = EXTI_TRIGGER_NONE; - pExtiConfig->GPIOSel = 0x00u; } return HAL_OK; diff --git a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_flash_ex.c b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_flash_ex.c index b97cb0c..e479c51 100644 --- a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_flash_ex.c +++ b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_flash_ex.c @@ -3,48 +3,48 @@ * @file stm32f4xx_hal_flash_ex.c * @author MCD Application Team * @brief Extended FLASH HAL module driver. - * This file provides firmware functions to manage the following + * This file provides firmware functions to manage the following * functionalities of the FLASH extension peripheral: * + Extended programming operations functions - * + * @verbatim ============================================================================== ##### Flash Extension features ##### ============================================================================== - - [..] Comparing to other previous devices, the FLASH interface for STM32F427xx/437xx and - STM32F429xx/439xx devices contains the following additional features - + + [..] Comparing to other previous devices, the FLASH interface for STM32F427xx/437xx and + STM32F429xx/439xx devices contains the following additional features + (+) Capacity up to 2 Mbyte with dual bank architecture supporting read-while-write capability (RWW) - (+) Dual bank memory organization + (+) Dual bank memory organization (+) PCROP protection for all banks - + ##### How to use this driver ##### ============================================================================== - [..] This driver provides functions to configure and program the FLASH memory - of all STM32F427xx/437xx, STM32F429xx/439xx, STM32F469xx/479xx and STM32F446xx + [..] This driver provides functions to configure and program the FLASH memory + of all STM32F427xx/437xx, STM32F429xx/439xx, STM32F469xx/479xx and STM32F446xx devices. It includes - (#) FLASH Memory Erase functions: - (++) Lock and Unlock the FLASH interface using HAL_FLASH_Unlock() and + (#) FLASH Memory Erase functions: + (++) Lock and Unlock the FLASH interface using HAL_FLASH_Unlock() and HAL_FLASH_Lock() functions (++) Erase function: Erase sector, erase all sectors (++) There are two modes of erase : (+++) Polling Mode using HAL_FLASHEx_Erase() (+++) Interrupt Mode using HAL_FLASHEx_Erase_IT() - + (#) Option Bytes Programming functions: Use HAL_FLASHEx_OBProgram() to : (++) Set/Reset the write protection (++) Set the Read protection Level (++) Set the BOR level (++) Program the user Option Bytes - (#) Advanced Option Bytes Programming functions: Use HAL_FLASHEx_AdvOBProgram() to : + (#) Advanced Option Bytes Programming functions: Use HAL_FLASHEx_AdvOBProgram() to : (++) Extended space (bank 2) erase function (++) Full FLASH space (2 Mo) erase (bank 1 and bank 2) (++) Dual Boot activation (++) Write protection configuration for bank 2 (++) PCROP protection configuration and control for both banks - + @endverbatim ****************************************************************************** * @attention @@ -58,7 +58,7 @@ * opensource.org/licenses/BSD-3-Clause * ****************************************************************************** - */ + */ /* Includes ------------------------------------------------------------------*/ #include "stm32f4xx_hal.h" @@ -78,17 +78,17 @@ /* Private define ------------------------------------------------------------*/ /** @addtogroup FLASHEx_Private_Constants * @{ - */ + */ #define FLASH_TIMEOUT_VALUE 50000U /* 50 s */ /** * @} */ - + /* Private macro -------------------------------------------------------------*/ /* Private variables ---------------------------------------------------------*/ /** @addtogroup FLASHEx_Private_Variables * @{ - */ + */ extern FLASH_ProcessTypeDef pFlash; /** * @} @@ -118,7 +118,7 @@ static HAL_StatusTypeDef FLASH_OB_DisablePCROP(uint32_t Sector); #endif /* STM32F401xC || STM32F401xE || STM32F410xx || STM32F411xE || STM32F446xx || STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx STM32F413xx || STM32F423xx */ -#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx) || defined(STM32F469xx) || defined(STM32F479xx) +#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx) || defined(STM32F469xx) || defined(STM32F479xx) static HAL_StatusTypeDef FLASH_OB_EnablePCROP(uint32_t SectorBank1, uint32_t SectorBank2, uint32_t Banks); static HAL_StatusTypeDef FLASH_OB_DisablePCROP(uint32_t SectorBank1, uint32_t SectorBank2, uint32_t Banks); static HAL_StatusTypeDef FLASH_OB_BootConfig(uint8_t BootConfig); @@ -135,35 +135,35 @@ extern HAL_StatusTypeDef FLASH_WaitForLastOperation(uint32_t Timeout); */ /** @defgroup FLASHEx_Exported_Functions_Group1 Extended IO operation functions - * @brief Extended IO operation functions + * @brief Extended IO operation functions * -@verbatim +@verbatim =============================================================================== ##### Extended programming operation functions ##### - =============================================================================== + =============================================================================== [..] - This subsection provides a set of functions allowing to manage the Extension FLASH + This subsection provides a set of functions allowing to manage the Extension FLASH programming operations. @endverbatim * @{ */ /** - * @brief Perform a mass erase or erase the specified FLASH memory sectors + * @brief Perform a mass erase or erase the specified FLASH memory sectors * @param[in] pEraseInit pointer to an FLASH_EraseInitTypeDef structure that * contains the configuration information for the erasing. - * + * * @param[out] SectorError pointer to variable that - * contains the configuration information on faulty sector in case of error + * contains the configuration information on faulty sector in case of error * (0xFFFFFFFFU means that all the sectors have been correctly erased) - * + * * @retval HAL Status */ HAL_StatusTypeDef HAL_FLASHEx_Erase(FLASH_EraseInitTypeDef *pEraseInit, uint32_t *SectorError) { HAL_StatusTypeDef status = HAL_ERROR; uint32_t index = 0U; - + /* Process Locked */ __HAL_LOCK(&pFlash); @@ -173,19 +173,19 @@ HAL_StatusTypeDef HAL_FLASHEx_Erase(FLASH_EraseInitTypeDef *pEraseInit, uint32_t /* Wait for last operation to be completed */ status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); - if(status == HAL_OK) + if (status == HAL_OK) { /*Initialization of SectorError variable*/ *SectorError = 0xFFFFFFFFU; - - if(pEraseInit->TypeErase == FLASH_TYPEERASE_MASSERASE) + + if (pEraseInit->TypeErase == FLASH_TYPEERASE_MASSERASE) { /*Mass erase to be done*/ FLASH_MassErase((uint8_t) pEraseInit->VoltageRange, pEraseInit->Banks); /* Wait for last operation to be completed */ status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); - + /* if the erase operation is completed, disable the MER Bit */ FLASH->CR &= (~FLASH_MER_BIT); } @@ -195,17 +195,17 @@ HAL_StatusTypeDef HAL_FLASHEx_Erase(FLASH_EraseInitTypeDef *pEraseInit, uint32_t assert_param(IS_FLASH_NBSECTORS(pEraseInit->NbSectors + pEraseInit->Sector)); /* Erase by sector by sector to be done*/ - for(index = pEraseInit->Sector; index < (pEraseInit->NbSectors + pEraseInit->Sector); index++) + for (index = pEraseInit->Sector; index < (pEraseInit->NbSectors + pEraseInit->Sector); index++) { FLASH_Erase_Sector(index, (uint8_t) pEraseInit->VoltageRange); /* Wait for last operation to be completed */ status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); - + /* If the erase operation is completed, disable the SER and SNB Bits */ CLEAR_BIT(FLASH->CR, (FLASH_CR_SER | FLASH_CR_SNB)); - if(status != HAL_OK) + if (status != HAL_OK) { /* In case of error, stop erase procedure and return the faulty sector*/ *SectorError = index; @@ -214,7 +214,7 @@ HAL_StatusTypeDef HAL_FLASHEx_Erase(FLASH_EraseInitTypeDef *pEraseInit, uint32_t } } /* Flush the caches to be sure of the data consistency */ - FLASH_FlushCaches(); + FLASH_FlushCaches(); } /* Process Unlocked */ @@ -227,7 +227,7 @@ HAL_StatusTypeDef HAL_FLASHEx_Erase(FLASH_EraseInitTypeDef *pEraseInit, uint32_t * @brief Perform a mass erase or erase the specified FLASH memory sectors with interrupt enabled * @param pEraseInit pointer to an FLASH_EraseInitTypeDef structure that * contains the configuration information for the erasing. - * + * * @retval HAL Status */ HAL_StatusTypeDef HAL_FLASHEx_Erase_IT(FLASH_EraseInitTypeDef *pEraseInit) @@ -242,15 +242,15 @@ HAL_StatusTypeDef HAL_FLASHEx_Erase_IT(FLASH_EraseInitTypeDef *pEraseInit) /* Enable End of FLASH Operation interrupt */ __HAL_FLASH_ENABLE_IT(FLASH_IT_EOP); - + /* Enable Error source interrupt */ __HAL_FLASH_ENABLE_IT(FLASH_IT_ERR); - - /* Clear pending flags (if any) */ - __HAL_FLASH_CLEAR_FLAG(FLASH_FLAG_EOP | FLASH_FLAG_OPERR | FLASH_FLAG_WRPERR |\ - FLASH_FLAG_PGAERR | FLASH_FLAG_PGPERR| FLASH_FLAG_PGSERR); - - if(pEraseInit->TypeErase == FLASH_TYPEERASE_MASSERASE) + + /* Clear pending flags (if any) */ + __HAL_FLASH_CLEAR_FLAG(FLASH_FLAG_EOP | FLASH_FLAG_OPERR | FLASH_FLAG_WRPERR | \ + FLASH_FLAG_PGAERR | FLASH_FLAG_PGPERR | FLASH_FLAG_PGSERR); + + if (pEraseInit->TypeErase == FLASH_TYPEERASE_MASSERASE) { /*Mass erase to be done*/ pFlash.ProcedureOnGoing = FLASH_PROC_MASSERASE; @@ -280,13 +280,13 @@ HAL_StatusTypeDef HAL_FLASHEx_Erase_IT(FLASH_EraseInitTypeDef *pEraseInit) * @brief Program option bytes * @param pOBInit pointer to an FLASH_OBInitStruct structure that * contains the configuration information for the programming. - * + * * @retval HAL Status */ HAL_StatusTypeDef HAL_FLASHEx_OBProgram(FLASH_OBProgramInitTypeDef *pOBInit) { HAL_StatusTypeDef status = HAL_ERROR; - + /* Process Locked */ __HAL_LOCK(&pFlash); @@ -294,10 +294,10 @@ HAL_StatusTypeDef HAL_FLASHEx_OBProgram(FLASH_OBProgramInitTypeDef *pOBInit) assert_param(IS_OPTIONBYTE(pOBInit->OptionType)); /*Write protection configuration*/ - if((pOBInit->OptionType & OPTIONBYTE_WRP) == OPTIONBYTE_WRP) + if ((pOBInit->OptionType & OPTIONBYTE_WRP) == OPTIONBYTE_WRP) { assert_param(IS_WRPSTATE(pOBInit->WRPState)); - if(pOBInit->WRPState == OB_WRPSTATE_ENABLE) + if (pOBInit->WRPState == OB_WRPSTATE_ENABLE) { /*Enable of Write protection on the selected Sector*/ status = FLASH_OB_EnableWRP(pOBInit->WRPSector, pOBInit->Banks); @@ -310,21 +310,21 @@ HAL_StatusTypeDef HAL_FLASHEx_OBProgram(FLASH_OBProgramInitTypeDef *pOBInit) } /*Read protection configuration*/ - if((pOBInit->OptionType & OPTIONBYTE_RDP) == OPTIONBYTE_RDP) + if ((pOBInit->OptionType & OPTIONBYTE_RDP) == OPTIONBYTE_RDP) { status = FLASH_OB_RDP_LevelConfig(pOBInit->RDPLevel); } /*USER configuration*/ - if((pOBInit->OptionType & OPTIONBYTE_USER) == OPTIONBYTE_USER) + if ((pOBInit->OptionType & OPTIONBYTE_USER) == OPTIONBYTE_USER) { - status = FLASH_OB_UserConfig(pOBInit->USERConfig&OB_IWDG_SW, - pOBInit->USERConfig&OB_STOP_NO_RST, - pOBInit->USERConfig&OB_STDBY_NO_RST); + status = FLASH_OB_UserConfig(pOBInit->USERConfig & OB_IWDG_SW, + pOBInit->USERConfig & OB_STOP_NO_RST, + pOBInit->USERConfig & OB_STDBY_NO_RST); } /*BOR Level configuration*/ - if((pOBInit->OptionType & OPTIONBYTE_BOR) == OPTIONBYTE_BOR) + if ((pOBInit->OptionType & OPTIONBYTE_BOR) == OPTIONBYTE_BOR) { status = FLASH_OB_BOR_LevelConfig(pOBInit->BORLevel); } @@ -339,7 +339,7 @@ HAL_StatusTypeDef HAL_FLASHEx_OBProgram(FLASH_OBProgramInitTypeDef *pOBInit) * @brief Get the Option byte configuration * @param pOBInit pointer to an FLASH_OBInitStruct structure that * contains the configuration information for the programming. - * + * * @retval None */ void HAL_FLASHEx_OBGetConfig(FLASH_OBProgramInitTypeDef *pOBInit) @@ -368,22 +368,22 @@ void HAL_FLASHEx_OBGetConfig(FLASH_OBProgramInitTypeDef *pOBInit) * @brief Program option bytes * @param pAdvOBInit pointer to an FLASH_AdvOBProgramInitTypeDef structure that * contains the configuration information for the programming. - * + * * @retval HAL Status */ -HAL_StatusTypeDef HAL_FLASHEx_AdvOBProgram (FLASH_AdvOBProgramInitTypeDef *pAdvOBInit) +HAL_StatusTypeDef HAL_FLASHEx_AdvOBProgram(FLASH_AdvOBProgramInitTypeDef *pAdvOBInit) { HAL_StatusTypeDef status = HAL_ERROR; - + /* Check the parameters */ assert_param(IS_OBEX(pAdvOBInit->OptionType)); /*Program PCROP option byte*/ - if(((pAdvOBInit->OptionType) & OPTIONBYTE_PCROP) == OPTIONBYTE_PCROP) + if (((pAdvOBInit->OptionType) & OPTIONBYTE_PCROP) == OPTIONBYTE_PCROP) { /* Check the parameters */ assert_param(IS_PCROPSTATE(pAdvOBInit->PCROPState)); - if((pAdvOBInit->PCROPState) == OB_PCROP_STATE_ENABLE) + if ((pAdvOBInit->PCROPState) == OB_PCROP_STATE_ENABLE) { /*Enable of Write protection on the selected Sector*/ #if defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) ||\ @@ -408,10 +408,10 @@ HAL_StatusTypeDef HAL_FLASHEx_AdvOBProgram (FLASH_AdvOBProgramInitTypeDef *pAdvO STM32F413xx || STM32F423xx */ } } - + #if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F469xx) || defined(STM32F479xx) /*Program BOOT config option byte*/ - if(((pAdvOBInit->OptionType) & OPTIONBYTE_BOOTCONFIG) == OPTIONBYTE_BOOTCONFIG) + if (((pAdvOBInit->OptionType) & OPTIONBYTE_BOOTCONFIG) == OPTIONBYTE_BOOTCONFIG) { status = FLASH_OB_BootConfig(pAdvOBInit->BootConfig); } @@ -424,7 +424,7 @@ HAL_StatusTypeDef HAL_FLASHEx_AdvOBProgram (FLASH_AdvOBProgramInitTypeDef *pAdvO * @brief Get the OBEX byte configuration * @param pAdvOBInit pointer to an FLASH_AdvOBProgramInitTypeDef structure that * contains the configuration information for the programming. - * + * * @retval None */ void HAL_FLASHEx_AdvOBGetConfig(FLASH_AdvOBProgramInitTypeDef *pAdvOBInit) @@ -448,15 +448,15 @@ void HAL_FLASHEx_AdvOBGetConfig(FLASH_AdvOBProgramInitTypeDef *pAdvOBInit) } /** - * @brief Select the Protection Mode - * - * @note After PCROP activated Option Byte modification NOT POSSIBLE! excepted - * Global Read Out Protection modification (from level1 to level0) - * @note Once SPRMOD bit is active unprotection of a protected sector is not possible + * @brief Select the Protection Mode + * + * @note After PCROP activated Option Byte modification NOT POSSIBLE! excepted + * Global Read Out Protection modification (from level1 to level0) + * @note Once SPRMOD bit is active unprotection of a protected sector is not possible * @note Read a protected sector will set RDERR Flag and write a protected sector will set WRPERR Flag * @note This function can be used only for STM32F42xxx/STM32F43xxx/STM32F401xx/STM32F411xx/STM32F446xx/ * STM32F469xx/STM32F479xx/STM32F412xx/STM32F413xx devices. - * + * * @retval HAL Status */ HAL_StatusTypeDef HAL_FLASHEx_OB_SelectPCROP(void) @@ -464,36 +464,36 @@ HAL_StatusTypeDef HAL_FLASHEx_OB_SelectPCROP(void) uint8_t optiontmp = 0xFF; /* Mask SPRMOD bit */ - optiontmp = (uint8_t)((*(__IO uint8_t *)OPTCR_BYTE3_ADDRESS) & (uint8_t)0x7F); - + optiontmp = (uint8_t)((*(__IO uint8_t *)OPTCR_BYTE3_ADDRESS) & (uint8_t)0x7F); + /* Update Option Byte */ - *(__IO uint8_t *)OPTCR_BYTE3_ADDRESS = (uint8_t)(OB_PCROP_SELECTED | optiontmp); - + *(__IO uint8_t *)OPTCR_BYTE3_ADDRESS = (uint8_t)(OB_PCROP_SELECTED | optiontmp); + return HAL_OK; } /** - * @brief Deselect the Protection Mode - * - * @note After PCROP activated Option Byte modification NOT POSSIBLE! excepted - * Global Read Out Protection modification (from level1 to level0) - * @note Once SPRMOD bit is active unprotection of a protected sector is not possible + * @brief Deselect the Protection Mode + * + * @note After PCROP activated Option Byte modification NOT POSSIBLE! excepted + * Global Read Out Protection modification (from level1 to level0) + * @note Once SPRMOD bit is active unprotection of a protected sector is not possible * @note Read a protected sector will set RDERR Flag and write a protected sector will set WRPERR Flag * @note This function can be used only for STM32F42xxx/STM32F43xxx/STM32F401xx/STM32F411xx/STM32F446xx/ * STM32F469xx/STM32F479xx/STM32F412xx/STM32F413xx devices. - * + * * @retval HAL Status */ HAL_StatusTypeDef HAL_FLASHEx_OB_DeSelectPCROP(void) { uint8_t optiontmp = 0xFF; - + /* Mask SPRMOD bit */ - optiontmp = (uint8_t)((*(__IO uint8_t *)OPTCR_BYTE3_ADDRESS) & (uint8_t)0x7F); - + optiontmp = (uint8_t)((*(__IO uint8_t *)OPTCR_BYTE3_ADDRESS) & (uint8_t)0x7F); + /* Update Option Byte */ - *(__IO uint8_t *)OPTCR_BYTE3_ADDRESS = (uint8_t)(OB_PCROP_DESELECTED | optiontmp); - + *(__IO uint8_t *)OPTCR_BYTE3_ADDRESS = (uint8_t)(OB_PCROP_DESELECTED | optiontmp); + return HAL_OK; } #endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F401xC || STM32F401xE || STM32F410xx ||\ @@ -503,11 +503,11 @@ HAL_StatusTypeDef HAL_FLASHEx_OB_DeSelectPCROP(void) #if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx) || defined(STM32F469xx) || defined(STM32F479xx) /** * @brief Returns the FLASH Write Protection Option Bytes value for Bank 2 - * @note This function can be used only for STM32F42xxx/STM32F43xxx/STM32F469xx/STM32F479xx devices. + * @note This function can be used only for STM32F42xxx/STM32F43xxx/STM32F469xx/STM32F479xx devices. * @retval The FLASH Write Protection Option Bytes value */ uint16_t HAL_FLASHEx_OB_GetBank2WRP(void) -{ +{ /* Return the FLASH write protection Register value */ return (*(__IO uint16_t *)(OPTCR1_BYTE2_ADDRESS)); } @@ -516,21 +516,21 @@ uint16_t HAL_FLASHEx_OB_GetBank2WRP(void) /** * @} */ - + #if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F469xx) || defined(STM32F479xx) /** - * @brief Full erase of FLASH memory sectors - * @param VoltageRange The device voltage range which defines the erase parallelism. + * @brief Full erase of FLASH memory sectors + * @param VoltageRange The device voltage range which defines the erase parallelism. * This parameter can be one of the following values: - * @arg FLASH_VOLTAGE_RANGE_1: when the device voltage range is 1.8V to 2.1V, - * the operation will be done by byte (8-bit) + * @arg FLASH_VOLTAGE_RANGE_1: when the device voltage range is 1.8V to 2.1V, + * the operation will be done by byte (8-bit) * @arg FLASH_VOLTAGE_RANGE_2: when the device voltage range is 2.1V to 2.7V, * the operation will be done by half word (16-bit) * @arg FLASH_VOLTAGE_RANGE_3: when the device voltage range is 2.7V to 3.6V, * the operation will be done by word (32-bit) - * @arg FLASH_VOLTAGE_RANGE_4: when the device voltage range is 2.7V to 3.6V + External Vpp, + * @arg FLASH_VOLTAGE_RANGE_4: when the device voltage range is 2.7V to 3.6V + External Vpp, * the operation will be done by double word (64-bit) - * + * * @param Banks Banks to be erased * This parameter can be one of the following values: * @arg FLASH_BANK_1: Bank1 to be erased @@ -548,12 +548,12 @@ static void FLASH_MassErase(uint8_t VoltageRange, uint32_t Banks) /* if the previous operation is completed, proceed to erase all sectors */ CLEAR_BIT(FLASH->CR, FLASH_CR_PSIZE); - if(Banks == FLASH_BANK_BOTH) + if (Banks == FLASH_BANK_BOTH) { /* bank1 & bank2 will be erased*/ FLASH->CR |= FLASH_MER_BIT; } - else if(Banks == FLASH_BANK_1) + else if (Banks == FLASH_BANK_1) { /*Only bank1 will be erased*/ FLASH->CR |= FLASH_CR_MER1; @@ -563,24 +563,24 @@ static void FLASH_MassErase(uint8_t VoltageRange, uint32_t Banks) /*Only bank2 will be erased*/ FLASH->CR |= FLASH_CR_MER2; } - FLASH->CR |= FLASH_CR_STRT | ((uint32_t)VoltageRange <<8U); + FLASH->CR |= FLASH_CR_STRT | ((uint32_t)VoltageRange << 8U); } /** * @brief Erase the specified FLASH memory sector * @param Sector FLASH sector to erase - * The value of this parameter depend on device used within the same series - * @param VoltageRange The device voltage range which defines the erase parallelism. + * The value of this parameter depend on device used within the same series + * @param VoltageRange The device voltage range which defines the erase parallelism. * This parameter can be one of the following values: - * @arg FLASH_VOLTAGE_RANGE_1: when the device voltage range is 1.8V to 2.1V, - * the operation will be done by byte (8-bit) + * @arg FLASH_VOLTAGE_RANGE_1: when the device voltage range is 1.8V to 2.1V, + * the operation will be done by byte (8-bit) * @arg FLASH_VOLTAGE_RANGE_2: when the device voltage range is 2.1V to 2.7V, * the operation will be done by half word (16-bit) * @arg FLASH_VOLTAGE_RANGE_3: when the device voltage range is 2.7V to 3.6V, * the operation will be done by word (32-bit) - * @arg FLASH_VOLTAGE_RANGE_4: when the device voltage range is 2.7V to 3.6V + External Vpp, + * @arg FLASH_VOLTAGE_RANGE_4: when the device voltage range is 2.7V to 3.6V + External Vpp, * the operation will be done by double word (64-bit) - * + * * @retval None */ void FLASH_Erase_Sector(uint32_t Sector, uint8_t VoltageRange) @@ -590,16 +590,16 @@ void FLASH_Erase_Sector(uint32_t Sector, uint8_t VoltageRange) /* Check the parameters */ assert_param(IS_FLASH_SECTOR(Sector)); assert_param(IS_VOLTAGERANGE(VoltageRange)); - - if(VoltageRange == FLASH_VOLTAGE_RANGE_1) + + if (VoltageRange == FLASH_VOLTAGE_RANGE_1) { - tmp_psize = FLASH_PSIZE_BYTE; + tmp_psize = FLASH_PSIZE_BYTE; } - else if(VoltageRange == FLASH_VOLTAGE_RANGE_2) + else if (VoltageRange == FLASH_VOLTAGE_RANGE_2) { tmp_psize = FLASH_PSIZE_HALF_WORD; } - else if(VoltageRange == FLASH_VOLTAGE_RANGE_3) + else if (VoltageRange == FLASH_VOLTAGE_RANGE_3) { tmp_psize = FLASH_PSIZE_WORD; } @@ -609,7 +609,7 @@ void FLASH_Erase_Sector(uint32_t Sector, uint8_t VoltageRange) } /* Need to add offset of 4 when sector higher than FLASH_SECTOR_11 */ - if(Sector > FLASH_SECTOR_11) + if (Sector > FLASH_SECTOR_11) { Sector += 4U; } @@ -624,11 +624,11 @@ void FLASH_Erase_Sector(uint32_t Sector, uint8_t VoltageRange) /** * @brief Enable the write protection of the desired bank1 or bank 2 sectors * - * @note When the memory read protection level is selected (RDP level = 1), - * it is not possible to program or erase the flash sector i if CortexM4 - * debug features are connected or boot code is executed in RAM, even if nWRPi = 1 - * @note Active value of nWRPi bits is inverted when PCROP mode is active (SPRMOD =1). - * + * @note When the memory read protection level is selected (RDP level = 1), + * it is not possible to program or erase the flash sector i if CortexM4 + * debug features are connected or boot code is executed in RAM, even if nWRPi = 1 + * @note Active value of nWRPi bits is inverted when PCROP mode is active (SPRMOD =1). + * * @param WRPSector specifies the sector(s) to be write protected. * This parameter can be one of the following values: * @arg WRPSector: A value between OB_WRP_SECTOR_0 and OB_WRP_SECTOR_23 @@ -641,53 +641,53 @@ void FLASH_Erase_Sector(uint32_t Sector, uint8_t VoltageRange) * @arg FLASH_BANK_2: WRP on all sectors of bank2 * @arg FLASH_BANK_BOTH: WRP on all sectors of bank1 & bank2 * - * @retval HAL FLASH State + * @retval HAL FLASH State */ static HAL_StatusTypeDef FLASH_OB_EnableWRP(uint32_t WRPSector, uint32_t Banks) { HAL_StatusTypeDef status = HAL_OK; - + /* Check the parameters */ assert_param(IS_OB_WRP_SECTOR(WRPSector)); assert_param(IS_FLASH_BANK(Banks)); - + /* Wait for last operation to be completed */ status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); - if(status == HAL_OK) + if (status == HAL_OK) { - if(((WRPSector == OB_WRP_SECTOR_All) && ((Banks == FLASH_BANK_1) || (Banks == FLASH_BANK_BOTH))) || - (WRPSector < OB_WRP_SECTOR_12)) + if (((WRPSector == OB_WRP_SECTOR_All) && ((Banks == FLASH_BANK_1) || (Banks == FLASH_BANK_BOTH))) || + (WRPSector < OB_WRP_SECTOR_12)) { - if(WRPSector == OB_WRP_SECTOR_All) - { - /*Write protection on all sector of BANK1*/ - *(__IO uint16_t*)OPTCR_BYTE2_ADDRESS &= (~(WRPSector>>12)); - } - else - { - /*Write protection done on sectors of BANK1*/ - *(__IO uint16_t*)OPTCR_BYTE2_ADDRESS &= (~WRPSector); - } + if (WRPSector == OB_WRP_SECTOR_All) + { + /*Write protection on all sector of BANK1*/ + *(__IO uint16_t *)OPTCR_BYTE2_ADDRESS &= (~(WRPSector >> 12)); + } + else + { + /*Write protection done on sectors of BANK1*/ + *(__IO uint16_t *)OPTCR_BYTE2_ADDRESS &= (~WRPSector); + } } - else + else { /*Write protection done on sectors of BANK2*/ - *(__IO uint16_t*)OPTCR1_BYTE2_ADDRESS &= (~(WRPSector>>12)); + *(__IO uint16_t *)OPTCR1_BYTE2_ADDRESS &= (~(WRPSector >> 12)); } /*Write protection on all sector of BANK2*/ - if((WRPSector == OB_WRP_SECTOR_All) && (Banks == FLASH_BANK_BOTH)) + if ((WRPSector == OB_WRP_SECTOR_All) && (Banks == FLASH_BANK_BOTH)) { /* Wait for last operation to be completed */ status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); - - if(status == HAL_OK) - { - *(__IO uint16_t*)OPTCR1_BYTE2_ADDRESS &= (~(WRPSector>>12)); + + if (status == HAL_OK) + { + *(__IO uint16_t *)OPTCR1_BYTE2_ADDRESS &= (~(WRPSector >> 12)); } } - + } return status; } @@ -695,11 +695,11 @@ static HAL_StatusTypeDef FLASH_OB_EnableWRP(uint32_t WRPSector, uint32_t Banks) /** * @brief Disable the write protection of the desired bank1 or bank 2 sectors * - * @note When the memory read protection level is selected (RDP level = 1), - * it is not possible to program or erase the flash sector i if CortexM4 - * debug features are connected or boot code is executed in RAM, even if nWRPi = 1 - * @note Active value of nWRPi bits is inverted when PCROP mode is active (SPRMOD =1). - * + * @note When the memory read protection level is selected (RDP level = 1), + * it is not possible to program or erase the flash sector i if CortexM4 + * debug features are connected or boot code is executed in RAM, even if nWRPi = 1 + * @note Active value of nWRPi bits is inverted when PCROP mode is active (SPRMOD =1). + * * @param WRPSector specifies the sector(s) to be write protected. * This parameter can be one of the following values: * @arg WRPSector: A value between OB_WRP_SECTOR_0 and OB_WRP_SECTOR_23 @@ -712,53 +712,53 @@ static HAL_StatusTypeDef FLASH_OB_EnableWRP(uint32_t WRPSector, uint32_t Banks) * @arg FLASH_BANK_2: Bank2 to be erased * @arg FLASH_BANK_BOTH: Bank1 and Bank2 to be erased * - * @retval HAL Status + * @retval HAL Status */ static HAL_StatusTypeDef FLASH_OB_DisableWRP(uint32_t WRPSector, uint32_t Banks) { HAL_StatusTypeDef status = HAL_OK; - + /* Check the parameters */ assert_param(IS_OB_WRP_SECTOR(WRPSector)); assert_param(IS_FLASH_BANK(Banks)); - + /* Wait for last operation to be completed */ status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); - if(status == HAL_OK) + if (status == HAL_OK) { - if(((WRPSector == OB_WRP_SECTOR_All) && ((Banks == FLASH_BANK_1) || (Banks == FLASH_BANK_BOTH))) || - (WRPSector < OB_WRP_SECTOR_12)) + if (((WRPSector == OB_WRP_SECTOR_All) && ((Banks == FLASH_BANK_1) || (Banks == FLASH_BANK_BOTH))) || + (WRPSector < OB_WRP_SECTOR_12)) { - if(WRPSector == OB_WRP_SECTOR_All) - { - /*Write protection on all sector of BANK1*/ - *(__IO uint16_t*)OPTCR_BYTE2_ADDRESS |= (uint16_t)(WRPSector>>12); - } - else - { - /*Write protection done on sectors of BANK1*/ - *(__IO uint16_t*)OPTCR_BYTE2_ADDRESS |= (uint16_t)WRPSector; - } + if (WRPSector == OB_WRP_SECTOR_All) + { + /*Write protection on all sector of BANK1*/ + *(__IO uint16_t *)OPTCR_BYTE2_ADDRESS |= (uint16_t)(WRPSector >> 12); + } + else + { + /*Write protection done on sectors of BANK1*/ + *(__IO uint16_t *)OPTCR_BYTE2_ADDRESS |= (uint16_t)WRPSector; + } } - else + else { /*Write protection done on sectors of BANK2*/ - *(__IO uint16_t*)OPTCR1_BYTE2_ADDRESS |= (uint16_t)(WRPSector>>12); + *(__IO uint16_t *)OPTCR1_BYTE2_ADDRESS |= (uint16_t)(WRPSector >> 12); } /*Write protection on all sector of BANK2*/ - if((WRPSector == OB_WRP_SECTOR_All) && (Banks == FLASH_BANK_BOTH)) + if ((WRPSector == OB_WRP_SECTOR_All) && (Banks == FLASH_BANK_BOTH)) { /* Wait for last operation to be completed */ status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); - - if(status == HAL_OK) - { - *(__IO uint16_t*)OPTCR1_BYTE2_ADDRESS |= (uint16_t)(WRPSector>>12); + + if (status == HAL_OK) + { + *(__IO uint16_t *)OPTCR1_BYTE2_ADDRESS |= (uint16_t)(WRPSector >> 12); } } - + } return status; @@ -766,9 +766,9 @@ static HAL_StatusTypeDef FLASH_OB_DisableWRP(uint32_t WRPSector, uint32_t Banks) /** * @brief Configure the Dual Bank Boot. - * + * * @note This function can be used only for STM32F42xxx/43xxx devices. - * + * * @param BootConfig specifies the Dual Bank Boot Option byte. * This parameter can be one of the following values: * @arg OB_Dual_BootEnabled: Dual Bank Boot Enable @@ -782,77 +782,77 @@ static HAL_StatusTypeDef FLASH_OB_BootConfig(uint8_t BootConfig) /* Check the parameters */ assert_param(IS_OB_BOOT(BootConfig)); - /* Wait for last operation to be completed */ + /* Wait for last operation to be completed */ status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); - if(status == HAL_OK) - { + if (status == HAL_OK) + { /* Set Dual Bank Boot */ *(__IO uint8_t *)OPTCR_BYTE0_ADDRESS &= (~FLASH_OPTCR_BFB2); *(__IO uint8_t *)OPTCR_BYTE0_ADDRESS |= BootConfig; } - + return status; } /** - * @brief Enable the read/write protection (PCROP) of the desired + * @brief Enable the read/write protection (PCROP) of the desired * sectors of Bank 1 and/or Bank 2. * @note This function can be used only for STM32F42xxx/43xxx devices. * @param SectorBank1 Specifies the sector(s) to be read/write protected or unprotected for bank1. * This parameter can be one of the following values: * @arg OB_PCROP: A value between OB_PCROP_SECTOR_0 and OB_PCROP_SECTOR_11 - * @arg OB_PCROP_SECTOR__All + * @arg OB_PCROP_SECTOR__All * @param SectorBank2 Specifies the sector(s) to be read/write protected or unprotected for bank2. * This parameter can be one of the following values: * @arg OB_PCROP: A value between OB_PCROP_SECTOR_12 and OB_PCROP_SECTOR_23 - * @arg OB_PCROP_SECTOR__All + * @arg OB_PCROP_SECTOR__All * @param Banks Enable PCROP protection on all the sectors for the specific bank * This parameter can be one of the following values: * @arg FLASH_BANK_1: WRP on all sectors of bank1 * @arg FLASH_BANK_2: WRP on all sectors of bank2 * @arg FLASH_BANK_BOTH: WRP on all sectors of bank1 & bank2 * - * @retval HAL Status + * @retval HAL Status */ static HAL_StatusTypeDef FLASH_OB_EnablePCROP(uint32_t SectorBank1, uint32_t SectorBank2, uint32_t Banks) { HAL_StatusTypeDef status = HAL_OK; - + assert_param(IS_FLASH_BANK(Banks)); - + /* Wait for last operation to be completed */ status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); - if(status == HAL_OK) + if (status == HAL_OK) { - if((Banks == FLASH_BANK_1) || (Banks == FLASH_BANK_BOTH)) + if ((Banks == FLASH_BANK_1) || (Banks == FLASH_BANK_BOTH)) { assert_param(IS_OB_PCROP(SectorBank1)); /*Write protection done on sectors of BANK1*/ - *(__IO uint16_t*)OPTCR_BYTE2_ADDRESS |= (uint16_t)SectorBank1; + *(__IO uint16_t *)OPTCR_BYTE2_ADDRESS |= (uint16_t)SectorBank1; } - else + else { assert_param(IS_OB_PCROP(SectorBank2)); /*Write protection done on sectors of BANK2*/ - *(__IO uint16_t*)OPTCR1_BYTE2_ADDRESS |= (uint16_t)SectorBank2; + *(__IO uint16_t *)OPTCR1_BYTE2_ADDRESS |= (uint16_t)SectorBank2; } /*Write protection on all sector of BANK2*/ - if(Banks == FLASH_BANK_BOTH) + if (Banks == FLASH_BANK_BOTH) { assert_param(IS_OB_PCROP(SectorBank2)); /* Wait for last operation to be completed */ status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); - - if(status == HAL_OK) - { + + if (status == HAL_OK) + { /*Write protection done on sectors of BANK2*/ - *(__IO uint16_t*)OPTCR1_BYTE2_ADDRESS |= (uint16_t)SectorBank2; + *(__IO uint16_t *)OPTCR1_BYTE2_ADDRESS |= (uint16_t)SectorBank2; } } - + } return status; @@ -860,66 +860,66 @@ static HAL_StatusTypeDef FLASH_OB_EnablePCROP(uint32_t SectorBank1, uint32_t Sec /** - * @brief Disable the read/write protection (PCROP) of the desired + * @brief Disable the read/write protection (PCROP) of the desired * sectors of Bank 1 and/or Bank 2. * @note This function can be used only for STM32F42xxx/43xxx devices. * @param SectorBank1 specifies the sector(s) to be read/write protected or unprotected for bank1. * This parameter can be one of the following values: * @arg OB_PCROP: A value between OB_PCROP_SECTOR_0 and OB_PCROP_SECTOR_11 - * @arg OB_PCROP_SECTOR__All + * @arg OB_PCROP_SECTOR__All * @param SectorBank2 Specifies the sector(s) to be read/write protected or unprotected for bank2. * This parameter can be one of the following values: * @arg OB_PCROP: A value between OB_PCROP_SECTOR_12 and OB_PCROP_SECTOR_23 - * @arg OB_PCROP_SECTOR__All + * @arg OB_PCROP_SECTOR__All * @param Banks Disable PCROP protection on all the sectors for the specific bank * This parameter can be one of the following values: * @arg FLASH_BANK_1: WRP on all sectors of bank1 * @arg FLASH_BANK_2: WRP on all sectors of bank2 * @arg FLASH_BANK_BOTH: WRP on all sectors of bank1 & bank2 * - * @retval HAL Status + * @retval HAL Status */ static HAL_StatusTypeDef FLASH_OB_DisablePCROP(uint32_t SectorBank1, uint32_t SectorBank2, uint32_t Banks) -{ +{ HAL_StatusTypeDef status = HAL_OK; - + /* Check the parameters */ assert_param(IS_FLASH_BANK(Banks)); - + /* Wait for last operation to be completed */ status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); - if(status == HAL_OK) + if (status == HAL_OK) { - if((Banks == FLASH_BANK_1) || (Banks == FLASH_BANK_BOTH)) + if ((Banks == FLASH_BANK_1) || (Banks == FLASH_BANK_BOTH)) { assert_param(IS_OB_PCROP(SectorBank1)); /*Write protection done on sectors of BANK1*/ - *(__IO uint16_t*)OPTCR_BYTE2_ADDRESS &= (~SectorBank1); + *(__IO uint16_t *)OPTCR_BYTE2_ADDRESS &= (~SectorBank1); } - else + else { /*Write protection done on sectors of BANK2*/ assert_param(IS_OB_PCROP(SectorBank2)); - *(__IO uint16_t*)OPTCR1_BYTE2_ADDRESS &= (~SectorBank2); + *(__IO uint16_t *)OPTCR1_BYTE2_ADDRESS &= (~SectorBank2); } /*Write protection on all sector of BANK2*/ - if(Banks == FLASH_BANK_BOTH) + if (Banks == FLASH_BANK_BOTH) { assert_param(IS_OB_PCROP(SectorBank2)); - /* Wait for last operation to be completed */ + /* Wait for last operation to be completed */ status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); - - if(status == HAL_OK) - { + + if (status == HAL_OK) + { /*Write protection done on sectors of BANK2*/ - *(__IO uint16_t*)OPTCR1_BYTE2_ADDRESS &= (~SectorBank2); + *(__IO uint16_t *)OPTCR1_BYTE2_ADDRESS &= (~SectorBank2); } } - + } - + return status; } @@ -933,17 +933,17 @@ static HAL_StatusTypeDef FLASH_OB_DisablePCROP(uint32_t SectorBank1, uint32_t Se defined(STM32F423xx) /** * @brief Mass erase of FLASH memory - * @param VoltageRange The device voltage range which defines the erase parallelism. + * @param VoltageRange The device voltage range which defines the erase parallelism. * This parameter can be one of the following values: - * @arg FLASH_VOLTAGE_RANGE_1: when the device voltage range is 1.8V to 2.1V, - * the operation will be done by byte (8-bit) + * @arg FLASH_VOLTAGE_RANGE_1: when the device voltage range is 1.8V to 2.1V, + * the operation will be done by byte (8-bit) * @arg FLASH_VOLTAGE_RANGE_2: when the device voltage range is 2.1V to 2.7V, * the operation will be done by half word (16-bit) * @arg FLASH_VOLTAGE_RANGE_3: when the device voltage range is 2.7V to 3.6V, * the operation will be done by word (32-bit) - * @arg FLASH_VOLTAGE_RANGE_4: when the device voltage range is 2.7V to 3.6V + External Vpp, + * @arg FLASH_VOLTAGE_RANGE_4: when the device voltage range is 2.7V to 3.6V + External Vpp, * the operation will be done by double word (64-bit) - * + * * @param Banks Banks to be erased * This parameter can be one of the following values: * @arg FLASH_BANK_1: Bank1 to be erased @@ -955,28 +955,28 @@ static void FLASH_MassErase(uint8_t VoltageRange, uint32_t Banks) /* Check the parameters */ assert_param(IS_VOLTAGERANGE(VoltageRange)); assert_param(IS_FLASH_BANK(Banks)); - + /* If the previous operation is completed, proceed to erase all sectors */ CLEAR_BIT(FLASH->CR, FLASH_CR_PSIZE); FLASH->CR |= FLASH_CR_MER; - FLASH->CR |= FLASH_CR_STRT | ((uint32_t)VoltageRange <<8U); + FLASH->CR |= FLASH_CR_STRT | ((uint32_t)VoltageRange << 8U); } /** * @brief Erase the specified FLASH memory sector * @param Sector FLASH sector to erase - * The value of this parameter depend on device used within the same series - * @param VoltageRange The device voltage range which defines the erase parallelism. + * The value of this parameter depend on device used within the same series + * @param VoltageRange The device voltage range which defines the erase parallelism. * This parameter can be one of the following values: - * @arg FLASH_VOLTAGE_RANGE_1: when the device voltage range is 1.8V to 2.1V, - * the operation will be done by byte (8-bit) + * @arg FLASH_VOLTAGE_RANGE_1: when the device voltage range is 1.8V to 2.1V, + * the operation will be done by byte (8-bit) * @arg FLASH_VOLTAGE_RANGE_2: when the device voltage range is 2.1V to 2.7V, * the operation will be done by half word (16-bit) * @arg FLASH_VOLTAGE_RANGE_3: when the device voltage range is 2.7V to 3.6V, * the operation will be done by word (32-bit) - * @arg FLASH_VOLTAGE_RANGE_4: when the device voltage range is 2.7V to 3.6V + External Vpp, + * @arg FLASH_VOLTAGE_RANGE_4: when the device voltage range is 2.7V to 3.6V + External Vpp, * the operation will be done by double word (64-bit) - * + * * @retval None */ void FLASH_Erase_Sector(uint32_t Sector, uint8_t VoltageRange) @@ -986,16 +986,16 @@ void FLASH_Erase_Sector(uint32_t Sector, uint8_t VoltageRange) /* Check the parameters */ assert_param(IS_FLASH_SECTOR(Sector)); assert_param(IS_VOLTAGERANGE(VoltageRange)); - - if(VoltageRange == FLASH_VOLTAGE_RANGE_1) + + if (VoltageRange == FLASH_VOLTAGE_RANGE_1) { - tmp_psize = FLASH_PSIZE_BYTE; + tmp_psize = FLASH_PSIZE_BYTE; } - else if(VoltageRange == FLASH_VOLTAGE_RANGE_2) + else if (VoltageRange == FLASH_VOLTAGE_RANGE_2) { tmp_psize = FLASH_PSIZE_HALF_WORD; } - else if(VoltageRange == FLASH_VOLTAGE_RANGE_3) + else if (VoltageRange == FLASH_VOLTAGE_RANGE_3) { tmp_psize = FLASH_PSIZE_WORD; } @@ -1015,72 +1015,72 @@ void FLASH_Erase_Sector(uint32_t Sector, uint8_t VoltageRange) /** * @brief Enable the write protection of the desired bank 1 sectors * - * @note When the memory read protection level is selected (RDP level = 1), - * it is not possible to program or erase the flash sector i if CortexM4 - * debug features are connected or boot code is executed in RAM, even if nWRPi = 1 - * @note Active value of nWRPi bits is inverted when PCROP mode is active (SPRMOD =1). - * + * @note When the memory read protection level is selected (RDP level = 1), + * it is not possible to program or erase the flash sector i if CortexM4 + * debug features are connected or boot code is executed in RAM, even if nWRPi = 1 + * @note Active value of nWRPi bits is inverted when PCROP mode is active (SPRMOD =1). + * * @param WRPSector specifies the sector(s) to be write protected. - * The value of this parameter depend on device used within the same series - * + * The value of this parameter depend on device used within the same series + * * @param Banks Enable write protection on all the sectors for the specific bank * This parameter can be one of the following values: * @arg FLASH_BANK_1: WRP on all sectors of bank1 * - * @retval HAL Status + * @retval HAL Status */ static HAL_StatusTypeDef FLASH_OB_EnableWRP(uint32_t WRPSector, uint32_t Banks) { HAL_StatusTypeDef status = HAL_OK; - + /* Check the parameters */ assert_param(IS_OB_WRP_SECTOR(WRPSector)); assert_param(IS_FLASH_BANK(Banks)); - + /* Wait for last operation to be completed */ status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); - if(status == HAL_OK) - { - *(__IO uint16_t*)OPTCR_BYTE2_ADDRESS &= (~WRPSector); + if (status == HAL_OK) + { + *(__IO uint16_t *)OPTCR_BYTE2_ADDRESS &= (~WRPSector); } - + return status; } /** * @brief Disable the write protection of the desired bank 1 sectors * - * @note When the memory read protection level is selected (RDP level = 1), - * it is not possible to program or erase the flash sector i if CortexM4 - * debug features are connected or boot code is executed in RAM, even if nWRPi = 1 - * @note Active value of nWRPi bits is inverted when PCROP mode is active (SPRMOD =1). - * + * @note When the memory read protection level is selected (RDP level = 1), + * it is not possible to program or erase the flash sector i if CortexM4 + * debug features are connected or boot code is executed in RAM, even if nWRPi = 1 + * @note Active value of nWRPi bits is inverted when PCROP mode is active (SPRMOD =1). + * * @param WRPSector specifies the sector(s) to be write protected. - * The value of this parameter depend on device used within the same series - * + * The value of this parameter depend on device used within the same series + * * @param Banks Enable write protection on all the sectors for the specific bank * This parameter can be one of the following values: * @arg FLASH_BANK_1: WRP on all sectors of bank1 * - * @retval HAL Status + * @retval HAL Status */ static HAL_StatusTypeDef FLASH_OB_DisableWRP(uint32_t WRPSector, uint32_t Banks) { HAL_StatusTypeDef status = HAL_OK; - + /* Check the parameters */ assert_param(IS_OB_WRP_SECTOR(WRPSector)); assert_param(IS_FLASH_BANK(Banks)); - + /* Wait for last operation to be completed */ status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); - if(status == HAL_OK) - { - *(__IO uint16_t*)OPTCR_BYTE2_ADDRESS |= (uint16_t)WRPSector; + if (status == HAL_OK) + { + *(__IO uint16_t *)OPTCR_BYTE2_ADDRESS |= (uint16_t)WRPSector; } - + return status; } #endif /* STM32F40xxx || STM32F41xxx || STM32F401xx || STM32F410xx || STM32F411xE || STM32F446xx || STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx @@ -1095,24 +1095,24 @@ static HAL_StatusTypeDef FLASH_OB_DisableWRP(uint32_t WRPSector, uint32_t Banks) * @param Sector specifies the sector(s) to be read/write protected or unprotected. * This parameter can be one of the following values: * @arg OB_PCROP: A value between OB_PCROP_Sector0 and OB_PCROP_Sector5 - * @arg OB_PCROP_Sector_All - * @retval HAL Status + * @arg OB_PCROP_Sector_All + * @retval HAL Status */ static HAL_StatusTypeDef FLASH_OB_EnablePCROP(uint32_t Sector) { HAL_StatusTypeDef status = HAL_OK; - + /* Check the parameters */ assert_param(IS_OB_PCROP(Sector)); - - /* Wait for last operation to be completed */ + + /* Wait for last operation to be completed */ status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); - if(status == HAL_OK) - { - *(__IO uint16_t*)OPTCR_BYTE2_ADDRESS |= (uint16_t)Sector; + if (status == HAL_OK) + { + *(__IO uint16_t *)OPTCR_BYTE2_ADDRESS |= (uint16_t)Sector; } - + return status; } @@ -1123,24 +1123,24 @@ static HAL_StatusTypeDef FLASH_OB_EnablePCROP(uint32_t Sector) * @param Sector specifies the sector(s) to be read/write protected or unprotected. * This parameter can be one of the following values: * @arg OB_PCROP: A value between OB_PCROP_Sector0 and OB_PCROP_Sector5 - * @arg OB_PCROP_Sector_All - * @retval HAL Status + * @arg OB_PCROP_Sector_All + * @retval HAL Status */ static HAL_StatusTypeDef FLASH_OB_DisablePCROP(uint32_t Sector) -{ +{ HAL_StatusTypeDef status = HAL_OK; - + /* Check the parameters */ assert_param(IS_OB_PCROP(Sector)); - - /* Wait for last operation to be completed */ + + /* Wait for last operation to be completed */ status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); - if(status == HAL_OK) - { - *(__IO uint16_t*)OPTCR_BYTE2_ADDRESS &= (~Sector); + if (status == HAL_OK) + { + *(__IO uint16_t *)OPTCR_BYTE2_ADDRESS &= (~Sector); } - + return status; } @@ -1154,31 +1154,31 @@ static HAL_StatusTypeDef FLASH_OB_DisablePCROP(uint32_t Sector) * @arg OB_RDP_LEVEL_0: No protection * @arg OB_RDP_LEVEL_1: Read protection of the memory * @arg OB_RDP_LEVEL_2: Full chip protection - * + * * @note WARNING: When enabling OB_RDP level 2 it's no more possible to go back to level 1 or 0 - * + * * @retval HAL Status */ static HAL_StatusTypeDef FLASH_OB_RDP_LevelConfig(uint8_t Level) { HAL_StatusTypeDef status = HAL_OK; - + /* Check the parameters */ assert_param(IS_OB_RDP_LEVEL(Level)); - + /* Wait for last operation to be completed */ status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); - if(status == HAL_OK) - { - *(__IO uint8_t*)OPTCR_BYTE1_ADDRESS = Level; + if (status == HAL_OK) + { + *(__IO uint8_t *)OPTCR_BYTE1_ADDRESS = Level; } - + return status; } /** - * @brief Program the FLASH User Option Byte: IWDG_SW / RST_STOP / RST_STDBY. + * @brief Program the FLASH User Option Byte: IWDG_SW / RST_STOP / RST_STDBY. * @param Iwdg Selects the IWDG mode * This parameter can be one of the following values: * @arg OB_IWDG_SW: Software IWDG selected @@ -1205,21 +1205,21 @@ static HAL_StatusTypeDef FLASH_OB_UserConfig(uint8_t Iwdg, uint8_t Stop, uint8_t /* Wait for last operation to be completed */ status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); - - if(status == HAL_OK) - { + + if (status == HAL_OK) + { /* Mask OPTLOCK, OPTSTRT, BOR_LEV and BFB2 bits */ - optiontmp = (uint8_t)((*(__IO uint8_t *)OPTCR_BYTE0_ADDRESS) & (uint8_t)0x1F); + optiontmp = (uint8_t)((*(__IO uint8_t *)OPTCR_BYTE0_ADDRESS) & (uint8_t)0x1F); /* Update User Option Byte */ - *(__IO uint8_t *)OPTCR_BYTE0_ADDRESS = Iwdg | (uint8_t)(Stdby | (uint8_t)(Stop | ((uint8_t)optiontmp))); + *(__IO uint8_t *)OPTCR_BYTE0_ADDRESS = Iwdg | (uint8_t)(Stdby | (uint8_t)(Stop | ((uint8_t)optiontmp))); } - - return status; + + return status; } /** - * @brief Set the BOR Level. + * @brief Set the BOR Level. * @param Level specifies the Option Bytes BOR Reset Level. * This parameter can be one of the following values: * @arg OB_BOR_LEVEL3: Supply voltage ranges from 2.7 to 3.6 V @@ -1236,9 +1236,9 @@ static HAL_StatusTypeDef FLASH_OB_BOR_LevelConfig(uint8_t Level) /* Set the BOR Level */ *(__IO uint8_t *)OPTCR_BYTE0_ADDRESS &= (~FLASH_OPTCR_BOR_LEV); *(__IO uint8_t *)OPTCR_BYTE0_ADDRESS |= Level; - + return HAL_OK; - + } /** @@ -1274,15 +1274,15 @@ static uint8_t FLASH_OB_GetRDP(void) { uint8_t readstatus = OB_RDP_LEVEL_0; - if((*(__IO uint8_t*)(OPTCR_BYTE1_ADDRESS) == (uint8_t)OB_RDP_LEVEL_2)) + if (*(__IO uint8_t *)(OPTCR_BYTE1_ADDRESS) == (uint8_t)OB_RDP_LEVEL_2) { readstatus = OB_RDP_LEVEL_2; } - else if((*(__IO uint8_t*)(OPTCR_BYTE1_ADDRESS) == (uint8_t)OB_RDP_LEVEL_0)) + else if (*(__IO uint8_t *)(OPTCR_BYTE1_ADDRESS) == (uint8_t)OB_RDP_LEVEL_0) { readstatus = OB_RDP_LEVEL_0; } - else + else { readstatus = OB_RDP_LEVEL_1; } @@ -1296,7 +1296,7 @@ static uint8_t FLASH_OB_GetRDP(void) * - OB_BOR_LEVEL3: Supply voltage ranges from 2.7 to 3.6 V * - OB_BOR_LEVEL2: Supply voltage ranges from 2.4 to 2.7 V * - OB_BOR_LEVEL1: Supply voltage ranges from 2.1 to 2.4 V - * - OB_BOR_OFF : Supply voltage ranges from 1.62 to 2.1 V + * - OB_BOR_OFF : Supply voltage ranges from 1.62 to 2.1 V */ static uint8_t FLASH_OB_GetBOR(void) { @@ -1311,7 +1311,7 @@ static uint8_t FLASH_OB_GetBOR(void) void FLASH_FlushCaches(void) { /* Flush instruction cache */ - if(READ_BIT(FLASH->ACR, FLASH_ACR_ICEN)!= RESET) + if (READ_BIT(FLASH->ACR, FLASH_ACR_ICEN) != RESET) { /* Disable instruction cache */ __HAL_FLASH_INSTRUCTION_CACHE_DISABLE(); @@ -1320,9 +1320,9 @@ void FLASH_FlushCaches(void) /* Enable instruction cache */ __HAL_FLASH_INSTRUCTION_CACHE_ENABLE(); } - + /* Flush data cache */ - if(READ_BIT(FLASH->ACR, FLASH_ACR_DCEN) != RESET) + if (READ_BIT(FLASH->ACR, FLASH_ACR_DCEN) != RESET) { /* Disable data cache */ __HAL_FLASH_DATA_CACHE_DISABLE(); @@ -1336,7 +1336,7 @@ void FLASH_FlushCaches(void) /** * @} */ - + #endif /* HAL_FLASH_MODULE_ENABLED */ /** diff --git a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_gpio.c b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_gpio.c index cef582d..c386f62 100644 --- a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_gpio.c +++ b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_gpio.c @@ -123,13 +123,6 @@ /** @addtogroup GPIO_Private_Constants GPIO Private Constants * @{ */ -#define GPIO_MODE 0x00000003U -#define EXTI_MODE 0x10000000U -#define GPIO_MODE_IT 0x00010000U -#define GPIO_MODE_EVT 0x00020000U -#define RISING_EDGE 0x00100000U -#define FALLING_EDGE 0x00200000U -#define GPIO_OUTPUT_TYPE 0x00000010U #define GPIO_NUMBER 16U /** @@ -179,7 +172,6 @@ void HAL_GPIO_Init(GPIO_TypeDef *GPIOx, GPIO_InitTypeDef *GPIO_Init) assert_param(IS_GPIO_ALL_INSTANCE(GPIOx)); assert_param(IS_GPIO_PIN(GPIO_Init->Pin)); assert_param(IS_GPIO_MODE(GPIO_Init->Mode)); - assert_param(IS_GPIO_PULL(GPIO_Init->Pull)); /* Configure the port pins */ for(position = 0U; position < GPIO_NUMBER; position++) @@ -193,8 +185,8 @@ void HAL_GPIO_Init(GPIO_TypeDef *GPIOx, GPIO_InitTypeDef *GPIO_Init) { /*--------------------- GPIO Mode Configuration ------------------------*/ /* In case of Output or Alternate function mode selection */ - if((GPIO_Init->Mode == GPIO_MODE_OUTPUT_PP) || (GPIO_Init->Mode == GPIO_MODE_AF_PP) || - (GPIO_Init->Mode == GPIO_MODE_OUTPUT_OD) || (GPIO_Init->Mode == GPIO_MODE_AF_OD)) + if(((GPIO_Init->Mode & GPIO_MODE) == MODE_OUTPUT) || \ + (GPIO_Init->Mode & GPIO_MODE) == MODE_AF) { /* Check the Speed parameter */ assert_param(IS_GPIO_SPEED(GPIO_Init->Speed)); @@ -207,18 +199,24 @@ void HAL_GPIO_Init(GPIO_TypeDef *GPIOx, GPIO_InitTypeDef *GPIO_Init) /* Configure the IO Output Type */ temp = GPIOx->OTYPER; temp &= ~(GPIO_OTYPER_OT_0 << position) ; - temp |= (((GPIO_Init->Mode & GPIO_OUTPUT_TYPE) >> 4U) << position); + temp |= (((GPIO_Init->Mode & OUTPUT_TYPE) >> OUTPUT_TYPE_Pos) << position); GPIOx->OTYPER = temp; } - /* Activate the Pull-up or Pull down resistor for the current IO */ - temp = GPIOx->PUPDR; - temp &= ~(GPIO_PUPDR_PUPDR0 << (position * 2U)); - temp |= ((GPIO_Init->Pull) << (position * 2U)); - GPIOx->PUPDR = temp; + if((GPIO_Init->Mode & GPIO_MODE) != MODE_ANALOG) + { + /* Check the parameters */ + assert_param(IS_GPIO_PULL(GPIO_Init->Pull)); + + /* Activate the Pull-up or Pull down resistor for the current IO */ + temp = GPIOx->PUPDR; + temp &= ~(GPIO_PUPDR_PUPDR0 << (position * 2U)); + temp |= ((GPIO_Init->Pull) << (position * 2U)); + GPIOx->PUPDR = temp; + } /* In case of Alternate function mode selection */ - if((GPIO_Init->Mode == GPIO_MODE_AF_PP) || (GPIO_Init->Mode == GPIO_MODE_AF_OD)) + if((GPIO_Init->Mode & GPIO_MODE) == MODE_AF) { /* Check the Alternate function parameter */ assert_param(IS_GPIO_AF(GPIO_Init->Alternate)); @@ -237,7 +235,7 @@ void HAL_GPIO_Init(GPIO_TypeDef *GPIOx, GPIO_InitTypeDef *GPIO_Init) /*--------------------- EXTI Mode Configuration ------------------------*/ /* Configure the External Interrupt or event for the current IO */ - if((GPIO_Init->Mode & EXTI_MODE) == EXTI_MODE) + if((GPIO_Init->Mode & EXTI_MODE) != 0x00U) { /* Enable SYSCFG Clock */ __HAL_RCC_SYSCFG_CLK_ENABLE(); @@ -250,7 +248,7 @@ void HAL_GPIO_Init(GPIO_TypeDef *GPIOx, GPIO_InitTypeDef *GPIO_Init) /* Clear EXTI line configuration */ temp = EXTI->IMR; temp &= ~((uint32_t)iocurrent); - if((GPIO_Init->Mode & GPIO_MODE_IT) == GPIO_MODE_IT) + if((GPIO_Init->Mode & EXTI_IT) != 0x00U) { temp |= iocurrent; } @@ -258,7 +256,7 @@ void HAL_GPIO_Init(GPIO_TypeDef *GPIOx, GPIO_InitTypeDef *GPIO_Init) temp = EXTI->EMR; temp &= ~((uint32_t)iocurrent); - if((GPIO_Init->Mode & GPIO_MODE_EVT) == GPIO_MODE_EVT) + if((GPIO_Init->Mode & EXTI_EVT) != 0x00U) { temp |= iocurrent; } @@ -267,7 +265,7 @@ void HAL_GPIO_Init(GPIO_TypeDef *GPIOx, GPIO_InitTypeDef *GPIO_Init) /* Clear Rising Falling edge configuration */ temp = EXTI->RTSR; temp &= ~((uint32_t)iocurrent); - if((GPIO_Init->Mode & RISING_EDGE) == RISING_EDGE) + if((GPIO_Init->Mode & TRIGGER_RISING) != 0x00U) { temp |= iocurrent; } @@ -275,7 +273,7 @@ void HAL_GPIO_Init(GPIO_TypeDef *GPIOx, GPIO_InitTypeDef *GPIO_Init) temp = EXTI->FTSR; temp &= ~((uint32_t)iocurrent); - if((GPIO_Init->Mode & FALLING_EDGE) == FALLING_EDGE) + if((GPIO_Init->Mode & TRIGGER_FALLING) != 0x00U) { temp |= iocurrent; } @@ -434,17 +432,16 @@ void HAL_GPIO_WritePin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin, GPIO_PinState Pin */ void HAL_GPIO_TogglePin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin) { + uint32_t odr; + /* Check the parameters */ assert_param(IS_GPIO_PIN(GPIO_Pin)); - if ((GPIOx->ODR & GPIO_Pin) == GPIO_Pin) - { - GPIOx->BSRR = (uint32_t)GPIO_Pin << GPIO_NUMBER; - } - else - { - GPIOx->BSRR = GPIO_Pin; - } + /* get current Ouput Data Register value */ + odr = GPIOx->ODR; + + /* Set selected pins that were at low level, and reset ones that were high */ + GPIOx->BSRR = ((odr & GPIO_Pin) << GPIO_NUMBER) | (~odr & GPIO_Pin); } /** diff --git a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_pwr.c b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_pwr.c index d736e82..a46999a 100644 --- a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_pwr.c +++ b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_pwr.c @@ -100,11 +100,19 @@ void HAL_PWR_DeInit(void) * backup data registers and backup SRAM). * @note If the HSE divided by 2, 3, ..31 is used as the RTC clock, the * Backup Domain Access should be kept enabled. + * @note The following sequence is required to bypass the delay between + * DBP bit programming and the effective enabling of the backup domain. + * Please check the Errata Sheet for more details under "Possible delay + * in backup domain protection disabling/enabling after programming the + * DBP bit" section. * @retval None */ void HAL_PWR_EnableBkUpAccess(void) { + __IO uint32_t dummyread; *(__IO uint32_t *) CR_DBP_BB = (uint32_t)ENABLE; + dummyread = PWR->CR; + UNUSED(dummyread); } /** @@ -112,11 +120,19 @@ void HAL_PWR_EnableBkUpAccess(void) * backup data registers and backup SRAM). * @note If the HSE divided by 2, 3, ..31 is used as the RTC clock, the * Backup Domain Access should be kept enabled. + * @note The following sequence is required to bypass the delay between + * DBP bit programming and the effective disabling of the backup domain. + * Please check the Errata Sheet for more details under "Possible delay + * in backup domain protection disabling/enabling after programming the + * DBP bit" section. * @retval None */ void HAL_PWR_DisableBkUpAccess(void) { + __IO uint32_t dummyread; *(__IO uint32_t *) CR_DBP_BB = (uint32_t)DISABLE; + dummyread = PWR->CR; + UNUSED(dummyread); } /** diff --git a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_rcc.c b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_rcc.c index 004f686..4cf59ef 100644 --- a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_rcc.c +++ b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_rcc.c @@ -539,12 +539,23 @@ __weak HAL_StatusTypeDef HAL_RCC_OscConfig(RCC_OscInitTypeDef *RCC_OscInitStruc else { /* Do not return HAL_ERROR if request repeats the current configuration */ - pll_config = RCC->CFGR; - if((READ_BIT(pll_config, RCC_PLLCFGR_PLLSRC) != RCC_OscInitStruct->PLL.PLLSource) || - (READ_BIT(pll_config, RCC_PLLCFGR_PLLM) != RCC_OscInitStruct->PLL.PLLM) || - (READ_BIT(pll_config, RCC_PLLCFGR_PLLN) != RCC_OscInitStruct->PLL.PLLN) || - (READ_BIT(pll_config, RCC_PLLCFGR_PLLP) != RCC_OscInitStruct->PLL.PLLP) || - (READ_BIT(pll_config, RCC_PLLCFGR_PLLQ) != RCC_OscInitStruct->PLL.PLLQ)) + pll_config = RCC->PLLCFGR; +#if defined (RCC_PLLCFGR_PLLR) + if (((RCC_OscInitStruct->PLL.PLLState) == RCC_PLL_OFF) || + (READ_BIT(pll_config, RCC_PLLCFGR_PLLSRC) != RCC_OscInitStruct->PLL.PLLSource) || + (READ_BIT(pll_config, RCC_PLLCFGR_PLLM) != (RCC_OscInitStruct->PLL.PLLM) << RCC_PLLCFGR_PLLM_Pos) || + (READ_BIT(pll_config, RCC_PLLCFGR_PLLN) != (RCC_OscInitStruct->PLL.PLLN) << RCC_PLLCFGR_PLLN_Pos) || + (READ_BIT(pll_config, RCC_PLLCFGR_PLLP) != (((RCC_OscInitStruct->PLL.PLLP >> 1U) - 1U)) << RCC_PLLCFGR_PLLP_Pos) || + (READ_BIT(pll_config, RCC_PLLCFGR_PLLQ) != (RCC_OscInitStruct->PLL.PLLQ << RCC_PLLCFGR_PLLQ_Pos)) || + (READ_BIT(pll_config, RCC_PLLCFGR_PLLR) != (RCC_OscInitStruct->PLL.PLLR << RCC_PLLCFGR_PLLR_Pos))) +#else + if (((RCC_OscInitStruct->PLL.PLLState) == RCC_PLL_OFF) || + (READ_BIT(pll_config, RCC_PLLCFGR_PLLSRC) != RCC_OscInitStruct->PLL.PLLSource) || + (READ_BIT(pll_config, RCC_PLLCFGR_PLLM) != (RCC_OscInitStruct->PLL.PLLM) << RCC_PLLCFGR_PLLM_Pos) || + (READ_BIT(pll_config, RCC_PLLCFGR_PLLN) != (RCC_OscInitStruct->PLL.PLLN) << RCC_PLLCFGR_PLLN_Pos) || + (READ_BIT(pll_config, RCC_PLLCFGR_PLLP) != (((RCC_OscInitStruct->PLL.PLLP >> 1U) - 1U)) << RCC_PLLCFGR_PLLP_Pos) || + (READ_BIT(pll_config, RCC_PLLCFGR_PLLQ) != (RCC_OscInitStruct->PLL.PLLQ << RCC_PLLCFGR_PLLQ_Pos))) +#endif { return HAL_ERROR; } diff --git a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_rcc_ex.c b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_rcc_ex.c index bca349c..63bc259 100644 --- a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_rcc_ex.c +++ b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_rcc_ex.c @@ -3334,7 +3334,13 @@ HAL_StatusTypeDef HAL_RCC_DeInit(void) */ HAL_StatusTypeDef HAL_RCC_OscConfig(RCC_OscInitTypeDef *RCC_OscInitStruct) { - uint32_t tickstart = 0U; + uint32_t tickstart, pll_config; + + /* Check Null pointer */ + if(RCC_OscInitStruct == NULL) + { + return HAL_ERROR; + } /* Check the parameters */ assert_param(IS_RCC_OSCILLATORTYPE(RCC_OscInitStruct->OscillatorType)); @@ -3612,13 +3618,12 @@ HAL_StatusTypeDef HAL_RCC_OscConfig(RCC_OscInitTypeDef *RCC_OscInitStruct) } /* Configure the main PLL clock source, multiplication and division factors. */ - __HAL_RCC_PLL_CONFIG(RCC_OscInitStruct->PLL.PLLSource, - RCC_OscInitStruct->PLL.PLLM, - RCC_OscInitStruct->PLL.PLLN, - RCC_OscInitStruct->PLL.PLLP, - RCC_OscInitStruct->PLL.PLLQ, - RCC_OscInitStruct->PLL.PLLR); - + WRITE_REG(RCC->PLLCFGR, (RCC_OscInitStruct->PLL.PLLSource | \ + RCC_OscInitStruct->PLL.PLLM | \ + (RCC_OscInitStruct->PLL.PLLN << RCC_PLLCFGR_PLLN_Pos) | \ + (((RCC_OscInitStruct->PLL.PLLP >> 1U) - 1U) << RCC_PLLCFGR_PLLP_Pos) | \ + (RCC_OscInitStruct->PLL.PLLQ << RCC_PLLCFGR_PLLQ_Pos) | \ + (RCC_OscInitStruct->PLL.PLLR << RCC_PLLCFGR_PLLR_Pos))); /* Enable the main PLL. */ __HAL_RCC_PLL_ENABLE(); @@ -3654,7 +3659,35 @@ HAL_StatusTypeDef HAL_RCC_OscConfig(RCC_OscInitTypeDef *RCC_OscInitStruct) } else { - return HAL_ERROR; + /* Check if there is a request to disable the PLL used as System clock source */ + if((RCC_OscInitStruct->PLL.PLLState) == RCC_PLL_OFF) + { + return HAL_ERROR; + } + else + { + /* Do not return HAL_ERROR if request repeats the current configuration */ + pll_config = RCC->PLLCFGR; +#if defined (RCC_PLLCFGR_PLLR) + if (((RCC_OscInitStruct->PLL.PLLState) == RCC_PLL_OFF) || + (READ_BIT(pll_config, RCC_PLLCFGR_PLLSRC) != RCC_OscInitStruct->PLL.PLLSource) || + (READ_BIT(pll_config, RCC_PLLCFGR_PLLM) != (RCC_OscInitStruct->PLL.PLLM) << RCC_PLLCFGR_PLLM_Pos) || + (READ_BIT(pll_config, RCC_PLLCFGR_PLLN) != (RCC_OscInitStruct->PLL.PLLN) << RCC_PLLCFGR_PLLN_Pos) || + (READ_BIT(pll_config, RCC_PLLCFGR_PLLP) != (((RCC_OscInitStruct->PLL.PLLP >> 1U) - 1U)) << RCC_PLLCFGR_PLLP_Pos) || + (READ_BIT(pll_config, RCC_PLLCFGR_PLLQ) != (RCC_OscInitStruct->PLL.PLLQ << RCC_PLLCFGR_PLLQ_Pos)) || + (READ_BIT(pll_config, RCC_PLLCFGR_PLLR) != (RCC_OscInitStruct->PLL.PLLR << RCC_PLLCFGR_PLLR_Pos))) +#else + if (((RCC_OscInitStruct->PLL.PLLState) == RCC_PLL_OFF) || + (READ_BIT(pll_config, RCC_PLLCFGR_PLLSRC) != RCC_OscInitStruct->PLL.PLLSource) || + (READ_BIT(pll_config, RCC_PLLCFGR_PLLM) != (RCC_OscInitStruct->PLL.PLLM) << RCC_PLLCFGR_PLLM_Pos) || + (READ_BIT(pll_config, RCC_PLLCFGR_PLLN) != (RCC_OscInitStruct->PLL.PLLN) << RCC_PLLCFGR_PLLN_Pos) || + (READ_BIT(pll_config, RCC_PLLCFGR_PLLP) != (((RCC_OscInitStruct->PLL.PLLP >> 1U) - 1U)) << RCC_PLLCFGR_PLLP_Pos) || + (READ_BIT(pll_config, RCC_PLLCFGR_PLLQ) != (RCC_OscInitStruct->PLL.PLLQ << RCC_PLLCFGR_PLLQ_Pos))) +#endif + { + return HAL_ERROR; + } + } } } return HAL_OK; diff --git a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_tim.c b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_tim.c index b98a29b..4dbfced 100644 --- a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_tim.c +++ b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_tim.c @@ -103,14 +103,14 @@ allows the user to configure dynamically the driver callbacks. [..] - Use Function @ref HAL_TIM_RegisterCallback() to register a callback. - @ref HAL_TIM_RegisterCallback() takes as parameters the HAL peripheral handle, + Use Function HAL_TIM_RegisterCallback() to register a callback. + HAL_TIM_RegisterCallback() takes as parameters the HAL peripheral handle, the Callback ID and a pointer to the user callback function. [..] - Use function @ref HAL_TIM_UnRegisterCallback() to reset a callback to the default + Use function HAL_TIM_UnRegisterCallback() to reset a callback to the default weak function. - @ref HAL_TIM_UnRegisterCallback takes as parameters the HAL peripheral handle, + HAL_TIM_UnRegisterCallback takes as parameters the HAL peripheral handle, and the Callback ID. [..] @@ -146,7 +146,7 @@ [..] By default, after the Init and when the state is HAL_TIM_STATE_RESET all interrupt callbacks are set to the corresponding weak functions: - examples @ref HAL_TIM_TriggerCallback(), @ref HAL_TIM_ErrorCallback(). + examples HAL_TIM_TriggerCallback(), HAL_TIM_ErrorCallback(). [..] Exception done for MspInit and MspDeInit functions that are reset to the legacy weak @@ -160,7 +160,7 @@ all interrupt callbacks are set to the corresponding weak functions: in HAL_TIM_STATE_READY or HAL_TIM_STATE_RESET state, thus registered(user) MspInit / DeInit callbacks can be used during the Init / DeInit. In that case first register the MspInit/MspDeInit user callbacks - using @ref HAL_TIM_RegisterCallback() before calling DeInit or Init function. + using HAL_TIM_RegisterCallback() before calling DeInit or Init function. [..] When The compilation define USE_HAL_TIM_REGISTER_CALLBACKS is set to 0 or @@ -198,7 +198,7 @@ all interrupt callbacks are set to the corresponding weak functions: /* Private typedef -----------------------------------------------------------*/ /* Private define ------------------------------------------------------------*/ -/* Private macro -------------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ /* Private variables ---------------------------------------------------------*/ /* Private function prototypes -----------------------------------------------*/ /** @addtogroup TIM_Private_Functions @@ -218,6 +218,7 @@ static void TIM_TI4_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32 static void TIM_ITRx_SetConfig(TIM_TypeDef *TIMx, uint32_t InputTriggerSource); static void TIM_DMAPeriodElapsedCplt(DMA_HandleTypeDef *hdma); static void TIM_DMAPeriodElapsedHalfCplt(DMA_HandleTypeDef *hdma); +static void TIM_DMADelayPulseCplt(DMA_HandleTypeDef *hdma); static void TIM_DMATriggerCplt(DMA_HandleTypeDef *hdma); static void TIM_DMATriggerHalfCplt(DMA_HandleTypeDef *hdma); static HAL_StatusTypeDef TIM_SlaveTimer_SetConfig(TIM_HandleTypeDef *htim, @@ -303,6 +304,13 @@ HAL_StatusTypeDef HAL_TIM_Base_Init(TIM_HandleTypeDef *htim) /* Set the Time Base configuration */ TIM_Base_SetConfig(htim->Instance, &htim->Init); + /* Initialize the DMA burst operation state */ + htim->DMABurstState = HAL_DMA_BURST_STATE_READY; + + /* Initialize the TIM channels state */ + TIM_CHANNEL_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_READY); + /* Initialize the TIM state*/ htim->State = HAL_TIM_STATE_READY; @@ -336,6 +344,13 @@ HAL_StatusTypeDef HAL_TIM_Base_DeInit(TIM_HandleTypeDef *htim) HAL_TIM_Base_MspDeInit(htim); #endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + /* Change the DMA burst operation state */ + htim->DMABurstState = HAL_DMA_BURST_STATE_RESET; + + /* Change the TIM channels state */ + TIM_CHANNEL_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_RESET); + TIM_CHANNEL_N_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_RESET); + /* Change TIM state */ htim->State = HAL_TIM_STATE_RESET; @@ -388,19 +403,29 @@ HAL_StatusTypeDef HAL_TIM_Base_Start(TIM_HandleTypeDef *htim) /* Check the parameters */ assert_param(IS_TIM_INSTANCE(htim->Instance)); + /* Check the TIM state */ + if (htim->State != HAL_TIM_STATE_READY) + { + return HAL_ERROR; + } + /* Set the TIM state */ htim->State = HAL_TIM_STATE_BUSY; /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ - tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; - if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else { __HAL_TIM_ENABLE(htim); } - /* Change the TIM state*/ - htim->State = HAL_TIM_STATE_READY; - /* Return function status */ return HAL_OK; } @@ -415,13 +440,10 @@ HAL_StatusTypeDef HAL_TIM_Base_Stop(TIM_HandleTypeDef *htim) /* Check the parameters */ assert_param(IS_TIM_INSTANCE(htim->Instance)); - /* Set the TIM state */ - htim->State = HAL_TIM_STATE_BUSY; - /* Disable the Peripheral */ __HAL_TIM_DISABLE(htim); - /* Change the TIM state*/ + /* Set the TIM state */ htim->State = HAL_TIM_STATE_READY; /* Return function status */ @@ -440,12 +462,28 @@ HAL_StatusTypeDef HAL_TIM_Base_Start_IT(TIM_HandleTypeDef *htim) /* Check the parameters */ assert_param(IS_TIM_INSTANCE(htim->Instance)); + /* Check the TIM state */ + if (htim->State != HAL_TIM_STATE_READY) + { + return HAL_ERROR; + } + + /* Set the TIM state */ + htim->State = HAL_TIM_STATE_BUSY; + /* Enable the TIM Update interrupt */ __HAL_TIM_ENABLE_IT(htim, TIM_IT_UPDATE); /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ - tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; - if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else { __HAL_TIM_ENABLE(htim); } @@ -463,12 +501,16 @@ HAL_StatusTypeDef HAL_TIM_Base_Stop_IT(TIM_HandleTypeDef *htim) { /* Check the parameters */ assert_param(IS_TIM_INSTANCE(htim->Instance)); + /* Disable the TIM Update interrupt */ __HAL_TIM_DISABLE_IT(htim, TIM_IT_UPDATE); /* Disable the Peripheral */ __HAL_TIM_DISABLE(htim); + /* Set the TIM state */ + htim->State = HAL_TIM_STATE_READY; + /* Return function status */ return HAL_OK; } @@ -487,6 +529,7 @@ HAL_StatusTypeDef HAL_TIM_Base_Start_DMA(TIM_HandleTypeDef *htim, uint32_t *pDat /* Check the parameters */ assert_param(IS_TIM_DMA_INSTANCE(htim->Instance)); + /* Set the TIM state */ if (htim->State == HAL_TIM_STATE_BUSY) { return HAL_BUSY; @@ -504,7 +547,7 @@ HAL_StatusTypeDef HAL_TIM_Base_Start_DMA(TIM_HandleTypeDef *htim, uint32_t *pDat } else { - /* nothing to do */ + return HAL_ERROR; } /* Set the DMA Period elapsed callbacks */ @@ -515,8 +558,10 @@ HAL_StatusTypeDef HAL_TIM_Base_Start_DMA(TIM_HandleTypeDef *htim, uint32_t *pDat htim->hdma[TIM_DMA_ID_UPDATE]->XferErrorCallback = TIM_DMAError ; /* Enable the DMA stream */ - if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_UPDATE], (uint32_t)pData, (uint32_t)&htim->Instance->ARR, Length) != HAL_OK) + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_UPDATE], (uint32_t)pData, (uint32_t)&htim->Instance->ARR, + Length) != HAL_OK) { + /* Return error status */ return HAL_ERROR; } @@ -524,8 +569,15 @@ HAL_StatusTypeDef HAL_TIM_Base_Start_DMA(TIM_HandleTypeDef *htim, uint32_t *pDat __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_UPDATE); /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ - tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; - if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else { __HAL_TIM_ENABLE(htim); } @@ -552,7 +604,7 @@ HAL_StatusTypeDef HAL_TIM_Base_Stop_DMA(TIM_HandleTypeDef *htim) /* Disable the Peripheral */ __HAL_TIM_DISABLE(htim); - /* Change the htim state */ + /* Set the TIM state */ htim->State = HAL_TIM_STATE_READY; /* Return function status */ @@ -635,6 +687,13 @@ HAL_StatusTypeDef HAL_TIM_OC_Init(TIM_HandleTypeDef *htim) /* Init the base time for the Output Compare */ TIM_Base_SetConfig(htim->Instance, &htim->Init); + /* Initialize the DMA burst operation state */ + htim->DMABurstState = HAL_DMA_BURST_STATE_READY; + + /* Initialize the TIM channels state */ + TIM_CHANNEL_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_READY); + /* Initialize the TIM state*/ htim->State = HAL_TIM_STATE_READY; @@ -668,6 +727,13 @@ HAL_StatusTypeDef HAL_TIM_OC_DeInit(TIM_HandleTypeDef *htim) HAL_TIM_OC_MspDeInit(htim); #endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + /* Change the DMA burst operation state */ + htim->DMABurstState = HAL_DMA_BURST_STATE_RESET; + + /* Change the TIM channels state */ + TIM_CHANNEL_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_RESET); + TIM_CHANNEL_N_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_RESET); + /* Change TIM state */ htim->State = HAL_TIM_STATE_RESET; @@ -725,6 +791,15 @@ HAL_StatusTypeDef HAL_TIM_OC_Start(TIM_HandleTypeDef *htim, uint32_t Channel) /* Check the parameters */ assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); + /* Check the TIM channel state */ + if (TIM_CHANNEL_STATE_GET(htim, Channel) != HAL_TIM_CHANNEL_STATE_READY) + { + return HAL_ERROR; + } + + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + /* Enable the Output compare channel */ TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE); @@ -735,8 +810,15 @@ HAL_StatusTypeDef HAL_TIM_OC_Start(TIM_HandleTypeDef *htim, uint32_t Channel) } /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ - tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; - if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else { __HAL_TIM_ENABLE(htim); } @@ -773,6 +855,9 @@ HAL_StatusTypeDef HAL_TIM_OC_Stop(TIM_HandleTypeDef *htim, uint32_t Channel) /* Disable the Peripheral */ __HAL_TIM_DISABLE(htim); + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + /* Return function status */ return HAL_OK; } @@ -790,11 +875,21 @@ HAL_StatusTypeDef HAL_TIM_OC_Stop(TIM_HandleTypeDef *htim, uint32_t Channel) */ HAL_StatusTypeDef HAL_TIM_OC_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel) { + HAL_StatusTypeDef status = HAL_OK; uint32_t tmpsmcr; /* Check the parameters */ assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); + /* Check the TIM channel state */ + if (TIM_CHANNEL_STATE_GET(htim, Channel) != HAL_TIM_CHANNEL_STATE_READY) + { + return HAL_ERROR; + } + + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + switch (Channel) { case TIM_CHANNEL_1: @@ -826,27 +921,38 @@ HAL_StatusTypeDef HAL_TIM_OC_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel) } default: + status = HAL_ERROR; break; } - /* Enable the Output compare channel */ - TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE); - - if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) + if (status == HAL_OK) { - /* Enable the main output */ - __HAL_TIM_MOE_ENABLE(htim); - } + /* Enable the Output compare channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE); - /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ - tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; - if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) - { - __HAL_TIM_ENABLE(htim); + if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) + { + /* Enable the main output */ + __HAL_TIM_MOE_ENABLE(htim); + } + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } } /* Return function status */ - return HAL_OK; + return status; } /** @@ -862,6 +968,8 @@ HAL_StatusTypeDef HAL_TIM_OC_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel) */ HAL_StatusTypeDef HAL_TIM_OC_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel) { + HAL_StatusTypeDef status = HAL_OK; + /* Check the parameters */ assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); @@ -896,23 +1004,30 @@ HAL_StatusTypeDef HAL_TIM_OC_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel) } default: + status = HAL_ERROR; break; } - /* Disable the Output compare channel */ - TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE); - - if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) + if (status == HAL_OK) { - /* Disable the Main Output */ - __HAL_TIM_MOE_DISABLE(htim); + /* Disable the Output compare channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE); + + if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) + { + /* Disable the Main Output */ + __HAL_TIM_MOE_DISABLE(htim); + } + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); } - /* Disable the Peripheral */ - __HAL_TIM_DISABLE(htim); - /* Return function status */ - return HAL_OK; + return status; } /** @@ -930,16 +1045,18 @@ HAL_StatusTypeDef HAL_TIM_OC_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel) */ HAL_StatusTypeDef HAL_TIM_OC_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length) { + HAL_StatusTypeDef status = HAL_OK; uint32_t tmpsmcr; /* Check the parameters */ assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); - if (htim->State == HAL_TIM_STATE_BUSY) + /* Set the TIM channel state */ + if (TIM_CHANNEL_STATE_GET(htim, Channel) == HAL_TIM_CHANNEL_STATE_BUSY) { return HAL_BUSY; } - else if (htim->State == HAL_TIM_STATE_READY) + else if (TIM_CHANNEL_STATE_GET(htim, Channel) == HAL_TIM_CHANNEL_STATE_READY) { if ((pData == NULL) && (Length > 0U)) { @@ -947,12 +1064,12 @@ HAL_StatusTypeDef HAL_TIM_OC_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel } else { - htim->State = HAL_TIM_STATE_BUSY; + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); } } else { - /* nothing to do */ + return HAL_ERROR; } switch (Channel) @@ -967,8 +1084,10 @@ HAL_StatusTypeDef HAL_TIM_OC_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ; /* Enable the DMA stream */ - if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)pData, (uint32_t)&htim->Instance->CCR1, Length) != HAL_OK) + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)pData, (uint32_t)&htim->Instance->CCR1, + Length) != HAL_OK) { + /* Return error status */ return HAL_ERROR; } @@ -987,8 +1106,10 @@ HAL_StatusTypeDef HAL_TIM_OC_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError ; /* Enable the DMA stream */ - if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)pData, (uint32_t)&htim->Instance->CCR2, Length) != HAL_OK) + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)pData, (uint32_t)&htim->Instance->CCR2, + Length) != HAL_OK) { + /* Return error status */ return HAL_ERROR; } @@ -1007,8 +1128,10 @@ HAL_StatusTypeDef HAL_TIM_OC_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = TIM_DMAError ; /* Enable the DMA stream */ - if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)pData, (uint32_t)&htim->Instance->CCR3, Length) != HAL_OK) + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)pData, (uint32_t)&htim->Instance->CCR3, + Length) != HAL_OK) { + /* Return error status */ return HAL_ERROR; } /* Enable the TIM Capture/Compare 3 DMA request */ @@ -1026,8 +1149,10 @@ HAL_StatusTypeDef HAL_TIM_OC_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel htim->hdma[TIM_DMA_ID_CC4]->XferErrorCallback = TIM_DMAError ; /* Enable the DMA stream */ - if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC4], (uint32_t)pData, (uint32_t)&htim->Instance->CCR4, Length) != HAL_OK) + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC4], (uint32_t)pData, (uint32_t)&htim->Instance->CCR4, + Length) != HAL_OK) { + /* Return error status */ return HAL_ERROR; } /* Enable the TIM Capture/Compare 4 DMA request */ @@ -1036,27 +1161,38 @@ HAL_StatusTypeDef HAL_TIM_OC_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel } default: + status = HAL_ERROR; break; } - /* Enable the Output compare channel */ - TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE); - - if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) + if (status == HAL_OK) { - /* Enable the main output */ - __HAL_TIM_MOE_ENABLE(htim); - } + /* Enable the Output compare channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE); - /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ - tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; - if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) - { - __HAL_TIM_ENABLE(htim); + if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) + { + /* Enable the main output */ + __HAL_TIM_MOE_ENABLE(htim); + } + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } } /* Return function status */ - return HAL_OK; + return status; } /** @@ -1072,6 +1208,8 @@ HAL_StatusTypeDef HAL_TIM_OC_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel */ HAL_StatusTypeDef HAL_TIM_OC_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel) { + HAL_StatusTypeDef status = HAL_OK; + /* Check the parameters */ assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); @@ -1110,26 +1248,30 @@ HAL_StatusTypeDef HAL_TIM_OC_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel) } default: + status = HAL_ERROR; break; } - /* Disable the Output compare channel */ - TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE); - - if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) + if (status == HAL_OK) { - /* Disable the Main Output */ - __HAL_TIM_MOE_DISABLE(htim); + /* Disable the Output compare channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE); + + if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) + { + /* Disable the Main Output */ + __HAL_TIM_MOE_DISABLE(htim); + } + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); } - /* Disable the Peripheral */ - __HAL_TIM_DISABLE(htim); - - /* Change the htim state */ - htim->State = HAL_TIM_STATE_READY; - /* Return function status */ - return HAL_OK; + return status; } /** @@ -1208,6 +1350,13 @@ HAL_StatusTypeDef HAL_TIM_PWM_Init(TIM_HandleTypeDef *htim) /* Init the base time for the PWM */ TIM_Base_SetConfig(htim->Instance, &htim->Init); + /* Initialize the DMA burst operation state */ + htim->DMABurstState = HAL_DMA_BURST_STATE_READY; + + /* Initialize the TIM channels state */ + TIM_CHANNEL_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_READY); + /* Initialize the TIM state*/ htim->State = HAL_TIM_STATE_READY; @@ -1241,6 +1390,13 @@ HAL_StatusTypeDef HAL_TIM_PWM_DeInit(TIM_HandleTypeDef *htim) HAL_TIM_PWM_MspDeInit(htim); #endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + /* Change the DMA burst operation state */ + htim->DMABurstState = HAL_DMA_BURST_STATE_RESET; + + /* Change the TIM channels state */ + TIM_CHANNEL_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_RESET); + TIM_CHANNEL_N_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_RESET); + /* Change TIM state */ htim->State = HAL_TIM_STATE_RESET; @@ -1298,6 +1454,15 @@ HAL_StatusTypeDef HAL_TIM_PWM_Start(TIM_HandleTypeDef *htim, uint32_t Channel) /* Check the parameters */ assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); + /* Check the TIM channel state */ + if (TIM_CHANNEL_STATE_GET(htim, Channel) != HAL_TIM_CHANNEL_STATE_READY) + { + return HAL_ERROR; + } + + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + /* Enable the Capture compare channel */ TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE); @@ -1308,8 +1473,15 @@ HAL_StatusTypeDef HAL_TIM_PWM_Start(TIM_HandleTypeDef *htim, uint32_t Channel) } /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ - tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; - if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else { __HAL_TIM_ENABLE(htim); } @@ -1346,8 +1518,8 @@ HAL_StatusTypeDef HAL_TIM_PWM_Stop(TIM_HandleTypeDef *htim, uint32_t Channel) /* Disable the Peripheral */ __HAL_TIM_DISABLE(htim); - /* Change the htim state */ - htim->State = HAL_TIM_STATE_READY; + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); /* Return function status */ return HAL_OK; @@ -1366,10 +1538,21 @@ HAL_StatusTypeDef HAL_TIM_PWM_Stop(TIM_HandleTypeDef *htim, uint32_t Channel) */ HAL_StatusTypeDef HAL_TIM_PWM_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel) { + HAL_StatusTypeDef status = HAL_OK; uint32_t tmpsmcr; + /* Check the parameters */ assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); + /* Check the TIM channel state */ + if (TIM_CHANNEL_STATE_GET(htim, Channel) != HAL_TIM_CHANNEL_STATE_READY) + { + return HAL_ERROR; + } + + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + switch (Channel) { case TIM_CHANNEL_1: @@ -1401,27 +1584,38 @@ HAL_StatusTypeDef HAL_TIM_PWM_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel } default: + status = HAL_ERROR; break; } - /* Enable the Capture compare channel */ - TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE); - - if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) + if (status == HAL_OK) { - /* Enable the main output */ - __HAL_TIM_MOE_ENABLE(htim); - } + /* Enable the Capture compare channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE); - /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ - tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; - if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) - { - __HAL_TIM_ENABLE(htim); + if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) + { + /* Enable the main output */ + __HAL_TIM_MOE_ENABLE(htim); + } + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } } /* Return function status */ - return HAL_OK; + return status; } /** @@ -1437,6 +1631,8 @@ HAL_StatusTypeDef HAL_TIM_PWM_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel */ HAL_StatusTypeDef HAL_TIM_PWM_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel) { + HAL_StatusTypeDef status = HAL_OK; + /* Check the parameters */ assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); @@ -1471,23 +1667,30 @@ HAL_StatusTypeDef HAL_TIM_PWM_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel) } default: + status = HAL_ERROR; break; } - /* Disable the Capture compare channel */ - TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE); - - if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) + if (status == HAL_OK) { - /* Disable the Main Output */ - __HAL_TIM_MOE_DISABLE(htim); + /* Disable the Capture compare channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE); + + if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) + { + /* Disable the Main Output */ + __HAL_TIM_MOE_DISABLE(htim); + } + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); } - /* Disable the Peripheral */ - __HAL_TIM_DISABLE(htim); - /* Return function status */ - return HAL_OK; + return status; } /** @@ -1505,16 +1708,18 @@ HAL_StatusTypeDef HAL_TIM_PWM_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel) */ HAL_StatusTypeDef HAL_TIM_PWM_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length) { + HAL_StatusTypeDef status = HAL_OK; uint32_t tmpsmcr; /* Check the parameters */ assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); - if (htim->State == HAL_TIM_STATE_BUSY) + /* Set the TIM channel state */ + if (TIM_CHANNEL_STATE_GET(htim, Channel) == HAL_TIM_CHANNEL_STATE_BUSY) { return HAL_BUSY; } - else if (htim->State == HAL_TIM_STATE_READY) + else if (TIM_CHANNEL_STATE_GET(htim, Channel) == HAL_TIM_CHANNEL_STATE_READY) { if ((pData == NULL) && (Length > 0U)) { @@ -1522,12 +1727,12 @@ HAL_StatusTypeDef HAL_TIM_PWM_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channe } else { - htim->State = HAL_TIM_STATE_BUSY; + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); } } else { - /* nothing to do */ + return HAL_ERROR; } switch (Channel) @@ -1542,8 +1747,10 @@ HAL_StatusTypeDef HAL_TIM_PWM_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channe htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ; /* Enable the DMA stream */ - if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)pData, (uint32_t)&htim->Instance->CCR1, Length) != HAL_OK) + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)pData, (uint32_t)&htim->Instance->CCR1, + Length) != HAL_OK) { + /* Return error status */ return HAL_ERROR; } @@ -1562,8 +1769,10 @@ HAL_StatusTypeDef HAL_TIM_PWM_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channe htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError ; /* Enable the DMA stream */ - if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)pData, (uint32_t)&htim->Instance->CCR2, Length) != HAL_OK) + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)pData, (uint32_t)&htim->Instance->CCR2, + Length) != HAL_OK) { + /* Return error status */ return HAL_ERROR; } /* Enable the TIM Capture/Compare 2 DMA request */ @@ -1581,8 +1790,10 @@ HAL_StatusTypeDef HAL_TIM_PWM_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channe htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = TIM_DMAError ; /* Enable the DMA stream */ - if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)pData, (uint32_t)&htim->Instance->CCR3, Length) != HAL_OK) + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)pData, (uint32_t)&htim->Instance->CCR3, + Length) != HAL_OK) { + /* Return error status */ return HAL_ERROR; } /* Enable the TIM Output Capture/Compare 3 request */ @@ -1600,8 +1811,10 @@ HAL_StatusTypeDef HAL_TIM_PWM_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channe htim->hdma[TIM_DMA_ID_CC4]->XferErrorCallback = TIM_DMAError ; /* Enable the DMA stream */ - if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC4], (uint32_t)pData, (uint32_t)&htim->Instance->CCR4, Length) != HAL_OK) + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC4], (uint32_t)pData, (uint32_t)&htim->Instance->CCR4, + Length) != HAL_OK) { + /* Return error status */ return HAL_ERROR; } /* Enable the TIM Capture/Compare 4 DMA request */ @@ -1610,27 +1823,38 @@ HAL_StatusTypeDef HAL_TIM_PWM_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channe } default: + status = HAL_ERROR; break; } - /* Enable the Capture compare channel */ - TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE); - - if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) + if (status == HAL_OK) { - /* Enable the main output */ - __HAL_TIM_MOE_ENABLE(htim); - } + /* Enable the Capture compare channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE); - /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ - tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; - if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) - { - __HAL_TIM_ENABLE(htim); + if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) + { + /* Enable the main output */ + __HAL_TIM_MOE_ENABLE(htim); + } + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } } /* Return function status */ - return HAL_OK; + return status; } /** @@ -1646,6 +1870,8 @@ HAL_StatusTypeDef HAL_TIM_PWM_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channe */ HAL_StatusTypeDef HAL_TIM_PWM_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel) { + HAL_StatusTypeDef status = HAL_OK; + /* Check the parameters */ assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); @@ -1684,26 +1910,30 @@ HAL_StatusTypeDef HAL_TIM_PWM_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel } default: + status = HAL_ERROR; break; } - /* Disable the Capture compare channel */ - TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE); - - if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) + if (status == HAL_OK) { - /* Disable the Main Output */ - __HAL_TIM_MOE_DISABLE(htim); + /* Disable the Capture compare channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE); + + if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) + { + /* Disable the Main Output */ + __HAL_TIM_MOE_DISABLE(htim); + } + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); } - /* Disable the Peripheral */ - __HAL_TIM_DISABLE(htim); - - /* Change the htim state */ - htim->State = HAL_TIM_STATE_READY; - /* Return function status */ - return HAL_OK; + return status; } /** @@ -1782,6 +2012,13 @@ HAL_StatusTypeDef HAL_TIM_IC_Init(TIM_HandleTypeDef *htim) /* Init the base time for the input capture */ TIM_Base_SetConfig(htim->Instance, &htim->Init); + /* Initialize the DMA burst operation state */ + htim->DMABurstState = HAL_DMA_BURST_STATE_READY; + + /* Initialize the TIM channels state */ + TIM_CHANNEL_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_READY); + /* Initialize the TIM state*/ htim->State = HAL_TIM_STATE_READY; @@ -1815,6 +2052,13 @@ HAL_StatusTypeDef HAL_TIM_IC_DeInit(TIM_HandleTypeDef *htim) HAL_TIM_IC_MspDeInit(htim); #endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + /* Change the DMA burst operation state */ + htim->DMABurstState = HAL_DMA_BURST_STATE_RESET; + + /* Change the TIM channels state */ + TIM_CHANNEL_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_RESET); + TIM_CHANNEL_N_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_RESET); + /* Change TIM state */ htim->State = HAL_TIM_STATE_RESET; @@ -1868,16 +2112,36 @@ __weak void HAL_TIM_IC_MspDeInit(TIM_HandleTypeDef *htim) HAL_StatusTypeDef HAL_TIM_IC_Start(TIM_HandleTypeDef *htim, uint32_t Channel) { uint32_t tmpsmcr; + HAL_TIM_ChannelStateTypeDef channel_state = TIM_CHANNEL_STATE_GET(htim, Channel); + HAL_TIM_ChannelStateTypeDef complementary_channel_state = TIM_CHANNEL_N_STATE_GET(htim, Channel); /* Check the parameters */ assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); + /* Check the TIM channel state */ + if ((channel_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_state != HAL_TIM_CHANNEL_STATE_READY)) + { + return HAL_ERROR; + } + + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + /* Enable the Input Capture channel */ TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE); /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ - tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; - if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else { __HAL_TIM_ENABLE(htim); } @@ -1908,6 +2172,10 @@ HAL_StatusTypeDef HAL_TIM_IC_Stop(TIM_HandleTypeDef *htim, uint32_t Channel) /* Disable the Peripheral */ __HAL_TIM_DISABLE(htim); + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + /* Return function status */ return HAL_OK; } @@ -1925,11 +2193,26 @@ HAL_StatusTypeDef HAL_TIM_IC_Stop(TIM_HandleTypeDef *htim, uint32_t Channel) */ HAL_StatusTypeDef HAL_TIM_IC_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel) { + HAL_StatusTypeDef status = HAL_OK; uint32_t tmpsmcr; + HAL_TIM_ChannelStateTypeDef channel_state = TIM_CHANNEL_STATE_GET(htim, Channel); + HAL_TIM_ChannelStateTypeDef complementary_channel_state = TIM_CHANNEL_N_STATE_GET(htim, Channel); + /* Check the parameters */ assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); + /* Check the TIM channel state */ + if ((channel_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_state != HAL_TIM_CHANNEL_STATE_READY)) + { + return HAL_ERROR; + } + + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + switch (Channel) { case TIM_CHANNEL_1: @@ -1961,20 +2244,32 @@ HAL_StatusTypeDef HAL_TIM_IC_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel) } default: + status = HAL_ERROR; break; } - /* Enable the Input Capture channel */ - TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE); - /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ - tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; - if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + if (status == HAL_OK) { - __HAL_TIM_ENABLE(htim); + /* Enable the Input Capture channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE); + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } } /* Return function status */ - return HAL_OK; + return status; } /** @@ -1990,6 +2285,8 @@ HAL_StatusTypeDef HAL_TIM_IC_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel) */ HAL_StatusTypeDef HAL_TIM_IC_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel) { + HAL_StatusTypeDef status = HAL_OK; + /* Check the parameters */ assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); @@ -2024,17 +2321,25 @@ HAL_StatusTypeDef HAL_TIM_IC_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel) } default: + status = HAL_ERROR; break; } - /* Disable the Input Capture channel */ - TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE); + if (status == HAL_OK) + { + /* Disable the Input Capture channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE); - /* Disable the Peripheral */ - __HAL_TIM_DISABLE(htim); + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + } /* Return function status */ - return HAL_OK; + return status; } /** @@ -2052,17 +2357,24 @@ HAL_StatusTypeDef HAL_TIM_IC_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel) */ HAL_StatusTypeDef HAL_TIM_IC_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length) { + HAL_StatusTypeDef status = HAL_OK; uint32_t tmpsmcr; + HAL_TIM_ChannelStateTypeDef channel_state = TIM_CHANNEL_STATE_GET(htim, Channel); + HAL_TIM_ChannelStateTypeDef complementary_channel_state = TIM_CHANNEL_N_STATE_GET(htim, Channel); + /* Check the parameters */ assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); assert_param(IS_TIM_DMA_CC_INSTANCE(htim->Instance)); - if (htim->State == HAL_TIM_STATE_BUSY) + /* Set the TIM channel state */ + if ((channel_state == HAL_TIM_CHANNEL_STATE_BUSY) + || (complementary_channel_state == HAL_TIM_CHANNEL_STATE_BUSY)) { return HAL_BUSY; } - else if (htim->State == HAL_TIM_STATE_READY) + else if ((channel_state == HAL_TIM_CHANNEL_STATE_READY) + && (complementary_channel_state == HAL_TIM_CHANNEL_STATE_READY)) { if ((pData == NULL) && (Length > 0U)) { @@ -2070,14 +2382,18 @@ HAL_StatusTypeDef HAL_TIM_IC_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel } else { - htim->State = HAL_TIM_STATE_BUSY; + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); } } else { - /* nothing to do */ + return HAL_ERROR; } + /* Enable the Input Capture channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE); + switch (Channel) { case TIM_CHANNEL_1: @@ -2090,8 +2406,10 @@ HAL_StatusTypeDef HAL_TIM_IC_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ; /* Enable the DMA stream */ - if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)&htim->Instance->CCR1, (uint32_t)pData, Length) != HAL_OK) + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)&htim->Instance->CCR1, (uint32_t)pData, + Length) != HAL_OK) { + /* Return error status */ return HAL_ERROR; } /* Enable the TIM Capture/Compare 1 DMA request */ @@ -2109,8 +2427,10 @@ HAL_StatusTypeDef HAL_TIM_IC_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError ; /* Enable the DMA stream */ - if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)&htim->Instance->CCR2, (uint32_t)pData, Length) != HAL_OK) + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)&htim->Instance->CCR2, (uint32_t)pData, + Length) != HAL_OK) { + /* Return error status */ return HAL_ERROR; } /* Enable the TIM Capture/Compare 2 DMA request */ @@ -2128,8 +2448,10 @@ HAL_StatusTypeDef HAL_TIM_IC_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = TIM_DMAError ; /* Enable the DMA stream */ - if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)&htim->Instance->CCR3, (uint32_t)pData, Length) != HAL_OK) + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)&htim->Instance->CCR3, (uint32_t)pData, + Length) != HAL_OK) { + /* Return error status */ return HAL_ERROR; } /* Enable the TIM Capture/Compare 3 DMA request */ @@ -2147,8 +2469,10 @@ HAL_StatusTypeDef HAL_TIM_IC_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel htim->hdma[TIM_DMA_ID_CC4]->XferErrorCallback = TIM_DMAError ; /* Enable the DMA stream */ - if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC4], (uint32_t)&htim->Instance->CCR4, (uint32_t)pData, Length) != HAL_OK) + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC4], (uint32_t)&htim->Instance->CCR4, (uint32_t)pData, + Length) != HAL_OK) { + /* Return error status */ return HAL_ERROR; } /* Enable the TIM Capture/Compare 4 DMA request */ @@ -2157,21 +2481,26 @@ HAL_StatusTypeDef HAL_TIM_IC_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel } default: + status = HAL_ERROR; break; } - /* Enable the Input Capture channel */ - TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE); - /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ - tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; - if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else { __HAL_TIM_ENABLE(htim); } /* Return function status */ - return HAL_OK; + return status; } /** @@ -2187,10 +2516,15 @@ HAL_StatusTypeDef HAL_TIM_IC_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel */ HAL_StatusTypeDef HAL_TIM_IC_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel) { + HAL_StatusTypeDef status = HAL_OK; + /* Check the parameters */ assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); assert_param(IS_TIM_DMA_CC_INSTANCE(htim->Instance)); + /* Disable the Input Capture channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE); + switch (Channel) { case TIM_CHANNEL_1: @@ -2226,20 +2560,22 @@ HAL_StatusTypeDef HAL_TIM_IC_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel) } default: + status = HAL_ERROR; break; } - /* Disable the Input Capture channel */ - TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE); + if (status == HAL_OK) + { + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); - /* Disable the Peripheral */ - __HAL_TIM_DISABLE(htim); - - /* Change the htim state */ - htim->State = HAL_TIM_STATE_READY; + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + } /* Return function status */ - return HAL_OK; + return status; } /** * @} @@ -2273,6 +2609,9 @@ HAL_StatusTypeDef HAL_TIM_IC_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel) * requires a timer reset to avoid unexpected direction * due to DIR bit readonly in center aligned mode. * Ex: call @ref HAL_TIM_OnePulse_DeInit() before HAL_TIM_OnePulse_Init() + * @note When the timer instance is initialized in One Pulse mode, timer + * channels 1 and channel 2 are reserved and cannot be used for other + * purpose. * @param htim TIM One Pulse handle * @param OnePulseMode Select the One pulse mode. * This parameter can be one of the following values: @@ -2328,6 +2667,15 @@ HAL_StatusTypeDef HAL_TIM_OnePulse_Init(TIM_HandleTypeDef *htim, uint32_t OnePul /* Configure the OPM Mode */ htim->Instance->CR1 |= OnePulseMode; + /* Initialize the DMA burst operation state */ + htim->DMABurstState = HAL_DMA_BURST_STATE_READY; + + /* Initialize the TIM channels state */ + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + /* Initialize the TIM state*/ htim->State = HAL_TIM_STATE_READY; @@ -2361,6 +2709,15 @@ HAL_StatusTypeDef HAL_TIM_OnePulse_DeInit(TIM_HandleTypeDef *htim) HAL_TIM_OnePulse_MspDeInit(htim); #endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + /* Change the DMA burst operation state */ + htim->DMABurstState = HAL_DMA_BURST_STATE_RESET; + + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_RESET); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_RESET); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_RESET); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_RESET); + /* Change TIM state */ htim->State = HAL_TIM_STATE_RESET; @@ -2402,23 +2759,44 @@ __weak void HAL_TIM_OnePulse_MspDeInit(TIM_HandleTypeDef *htim) /** * @brief Starts the TIM One Pulse signal generation. + * @note Though OutputChannel parameter is deprecated and ignored by the function + * it has been kept to avoid HAL_TIM API compatibility break. + * @note The pulse output channel is determined when calling + * @ref HAL_TIM_OnePulse_ConfigChannel(). * @param htim TIM One Pulse handle - * @param OutputChannel TIM Channels to be enabled - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @param OutputChannel See note above * @retval HAL status */ HAL_StatusTypeDef HAL_TIM_OnePulse_Start(TIM_HandleTypeDef *htim, uint32_t OutputChannel) { + HAL_TIM_ChannelStateTypeDef channel_1_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef channel_2_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_2); + HAL_TIM_ChannelStateTypeDef complementary_channel_1_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef complementary_channel_2_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_2); + /* Prevent unused argument(s) compilation warning */ UNUSED(OutputChannel); + /* Check the TIM channels state */ + if ((channel_1_state != HAL_TIM_CHANNEL_STATE_READY) + || (channel_2_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_1_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_2_state != HAL_TIM_CHANNEL_STATE_READY)) + { + return HAL_ERROR; + } + + /* Set the TIM channels state */ + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + /* Enable the Capture compare and the Input Capture channels (in the OPM Mode the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2) if TIM_CHANNEL_1 is used as output, the TIM_CHANNEL_2 will be used as input and if TIM_CHANNEL_1 is used as input, the TIM_CHANNEL_2 will be used as output - in all combinations, the TIM_CHANNEL_1 and TIM_CHANNEL_2 should be enabled together + whatever the combination, the TIM_CHANNEL_1 and TIM_CHANNEL_2 should be enabled together No need to enable the counter, it's enabled automatically by hardware (the counter starts in response to a stimulus and generate a pulse */ @@ -2438,11 +2816,12 @@ HAL_StatusTypeDef HAL_TIM_OnePulse_Start(TIM_HandleTypeDef *htim, uint32_t Outpu /** * @brief Stops the TIM One Pulse signal generation. + * @note Though OutputChannel parameter is deprecated and ignored by the function + * it has been kept to avoid HAL_TIM API compatibility break. + * @note The pulse output channel is determined when calling + * @ref HAL_TIM_OnePulse_ConfigChannel(). * @param htim TIM One Pulse handle - * @param OutputChannel TIM Channels to be disable - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @param OutputChannel See note above * @retval HAL status */ HAL_StatusTypeDef HAL_TIM_OnePulse_Stop(TIM_HandleTypeDef *htim, uint32_t OutputChannel) @@ -2454,7 +2833,7 @@ HAL_StatusTypeDef HAL_TIM_OnePulse_Stop(TIM_HandleTypeDef *htim, uint32_t Output (in the OPM Mode the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2) if TIM_CHANNEL_1 is used as output, the TIM_CHANNEL_2 will be used as input and if TIM_CHANNEL_1 is used as input, the TIM_CHANNEL_2 will be used as output - in all combinations, the TIM_CHANNEL_1 and TIM_CHANNEL_2 should be disabled together */ + whatever the combination, the TIM_CHANNEL_1 and TIM_CHANNEL_2 should be disabled together */ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE); TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE); @@ -2468,29 +2847,56 @@ HAL_StatusTypeDef HAL_TIM_OnePulse_Stop(TIM_HandleTypeDef *htim, uint32_t Output /* Disable the Peripheral */ __HAL_TIM_DISABLE(htim); + /* Set the TIM channels state */ + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + /* Return function status */ return HAL_OK; } /** * @brief Starts the TIM One Pulse signal generation in interrupt mode. + * @note Though OutputChannel parameter is deprecated and ignored by the function + * it has been kept to avoid HAL_TIM API compatibility break. + * @note The pulse output channel is determined when calling + * @ref HAL_TIM_OnePulse_ConfigChannel(). * @param htim TIM One Pulse handle - * @param OutputChannel TIM Channels to be enabled - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @param OutputChannel See note above * @retval HAL status */ HAL_StatusTypeDef HAL_TIM_OnePulse_Start_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel) { + HAL_TIM_ChannelStateTypeDef channel_1_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef channel_2_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_2); + HAL_TIM_ChannelStateTypeDef complementary_channel_1_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef complementary_channel_2_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_2); + /* Prevent unused argument(s) compilation warning */ UNUSED(OutputChannel); + /* Check the TIM channels state */ + if ((channel_1_state != HAL_TIM_CHANNEL_STATE_READY) + || (channel_2_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_1_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_2_state != HAL_TIM_CHANNEL_STATE_READY)) + { + return HAL_ERROR; + } + + /* Set the TIM channels state */ + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + /* Enable the Capture compare and the Input Capture channels (in the OPM Mode the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2) if TIM_CHANNEL_1 is used as output, the TIM_CHANNEL_2 will be used as input and if TIM_CHANNEL_1 is used as input, the TIM_CHANNEL_2 will be used as output - in all combinations, the TIM_CHANNEL_1 and TIM_CHANNEL_2 should be enabled together + whatever the combination, the TIM_CHANNEL_1 and TIM_CHANNEL_2 should be enabled together No need to enable the counter, it's enabled automatically by hardware (the counter starts in response to a stimulus and generate a pulse */ @@ -2516,11 +2922,12 @@ HAL_StatusTypeDef HAL_TIM_OnePulse_Start_IT(TIM_HandleTypeDef *htim, uint32_t Ou /** * @brief Stops the TIM One Pulse signal generation in interrupt mode. + * @note Though OutputChannel parameter is deprecated and ignored by the function + * it has been kept to avoid HAL_TIM API compatibility break. + * @note The pulse output channel is determined when calling + * @ref HAL_TIM_OnePulse_ConfigChannel(). * @param htim TIM One Pulse handle - * @param OutputChannel TIM Channels to be enabled - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @param OutputChannel See note above * @retval HAL status */ HAL_StatusTypeDef HAL_TIM_OnePulse_Stop_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel) @@ -2538,7 +2945,7 @@ HAL_StatusTypeDef HAL_TIM_OnePulse_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Out (in the OPM Mode the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2) if TIM_CHANNEL_1 is used as output, the TIM_CHANNEL_2 will be used as input and if TIM_CHANNEL_1 is used as input, the TIM_CHANNEL_2 will be used as output - in all combinations, the TIM_CHANNEL_1 and TIM_CHANNEL_2 should be disabled together */ + whatever the combination, the TIM_CHANNEL_1 and TIM_CHANNEL_2 should be disabled together */ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE); TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE); @@ -2551,6 +2958,12 @@ HAL_StatusTypeDef HAL_TIM_OnePulse_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Out /* Disable the Peripheral */ __HAL_TIM_DISABLE(htim); + /* Set the TIM channels state */ + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + /* Return function status */ return HAL_OK; } @@ -2589,6 +3002,9 @@ HAL_StatusTypeDef HAL_TIM_OnePulse_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Out * @note Encoder mode and External clock mode 2 are not compatible and must not be selected together * Ex: A call for @ref HAL_TIM_Encoder_Init will erase the settings of @ref HAL_TIM_ConfigClockSource * using TIM_CLOCKSOURCE_ETRMODE2 and vice versa + * @note When the timer instance is initialized in Encoder mode, timer + * channels 1 and channel 2 are reserved and cannot be used for other + * purpose. * @param htim TIM Encoder Interface handle * @param sConfig TIM Encoder Interface configuration structure * @retval HAL status @@ -2606,10 +3022,10 @@ HAL_StatusTypeDef HAL_TIM_Encoder_Init(TIM_HandleTypeDef *htim, TIM_Encoder_Ini } /* Check the parameters */ + assert_param(IS_TIM_ENCODER_INTERFACE_INSTANCE(htim->Instance)); assert_param(IS_TIM_COUNTER_MODE(htim->Init.CounterMode)); assert_param(IS_TIM_CLOCKDIVISION_DIV(htim->Init.ClockDivision)); assert_param(IS_TIM_AUTORELOAD_PRELOAD(htim->Init.AutoReloadPreload)); - assert_param(IS_TIM_CC2_INSTANCE(htim->Instance)); assert_param(IS_TIM_ENCODER_MODE(sConfig->EncoderMode)); assert_param(IS_TIM_IC_SELECTION(sConfig->IC1Selection)); assert_param(IS_TIM_IC_SELECTION(sConfig->IC2Selection)); @@ -2686,6 +3102,15 @@ HAL_StatusTypeDef HAL_TIM_Encoder_Init(TIM_HandleTypeDef *htim, TIM_Encoder_Ini /* Write to TIMx CCER */ htim->Instance->CCER = tmpccer; + /* Initialize the DMA burst operation state */ + htim->DMABurstState = HAL_DMA_BURST_STATE_READY; + + /* Set the TIM channels state */ + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + /* Initialize the TIM state*/ htim->State = HAL_TIM_STATE_READY; @@ -2720,6 +3145,15 @@ HAL_StatusTypeDef HAL_TIM_Encoder_DeInit(TIM_HandleTypeDef *htim) HAL_TIM_Encoder_MspDeInit(htim); #endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + /* Change the DMA burst operation state */ + htim->DMABurstState = HAL_DMA_BURST_STATE_RESET; + + /* Set the TIM channels state */ + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_RESET); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_RESET); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_RESET); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_RESET); + /* Change TIM state */ htim->State = HAL_TIM_STATE_RESET; @@ -2771,8 +3205,58 @@ __weak void HAL_TIM_Encoder_MspDeInit(TIM_HandleTypeDef *htim) */ HAL_StatusTypeDef HAL_TIM_Encoder_Start(TIM_HandleTypeDef *htim, uint32_t Channel) { + HAL_TIM_ChannelStateTypeDef channel_1_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef channel_2_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_2); + HAL_TIM_ChannelStateTypeDef complementary_channel_1_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef complementary_channel_2_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_2); + /* Check the parameters */ - assert_param(IS_TIM_CC2_INSTANCE(htim->Instance)); + assert_param(IS_TIM_ENCODER_INTERFACE_INSTANCE(htim->Instance)); + + /* Set the TIM channel(s) state */ + if (Channel == TIM_CHANNEL_1) + { + if ((channel_1_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_1_state != HAL_TIM_CHANNEL_STATE_READY)) + { + return HAL_ERROR; + } + else + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + } + } + else if (Channel == TIM_CHANNEL_2) + { + if ((channel_2_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_2_state != HAL_TIM_CHANNEL_STATE_READY)) + { + return HAL_ERROR; + } + else + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + } + } + else + { + if ((channel_1_state != HAL_TIM_CHANNEL_STATE_READY) + || (channel_2_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_1_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_2_state != HAL_TIM_CHANNEL_STATE_READY)) + { + return HAL_ERROR; + } + else + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + } + } /* Enable the encoder interface channels */ switch (Channel) @@ -2816,7 +3300,7 @@ HAL_StatusTypeDef HAL_TIM_Encoder_Start(TIM_HandleTypeDef *htim, uint32_t Channe HAL_StatusTypeDef HAL_TIM_Encoder_Stop(TIM_HandleTypeDef *htim, uint32_t Channel) { /* Check the parameters */ - assert_param(IS_TIM_CC2_INSTANCE(htim->Instance)); + assert_param(IS_TIM_ENCODER_INTERFACE_INSTANCE(htim->Instance)); /* Disable the Input Capture channels 1 and 2 (in the EncoderInterface the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2) */ @@ -2845,6 +3329,20 @@ HAL_StatusTypeDef HAL_TIM_Encoder_Stop(TIM_HandleTypeDef *htim, uint32_t Channel /* Disable the Peripheral */ __HAL_TIM_DISABLE(htim); + /* Set the TIM channel(s) state */ + if ((Channel == TIM_CHANNEL_1) || (Channel == TIM_CHANNEL_2)) + { + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + } + else + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + } + /* Return function status */ return HAL_OK; } @@ -2861,8 +3359,58 @@ HAL_StatusTypeDef HAL_TIM_Encoder_Stop(TIM_HandleTypeDef *htim, uint32_t Channel */ HAL_StatusTypeDef HAL_TIM_Encoder_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel) { + HAL_TIM_ChannelStateTypeDef channel_1_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef channel_2_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_2); + HAL_TIM_ChannelStateTypeDef complementary_channel_1_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef complementary_channel_2_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_2); + /* Check the parameters */ - assert_param(IS_TIM_CC2_INSTANCE(htim->Instance)); + assert_param(IS_TIM_ENCODER_INTERFACE_INSTANCE(htim->Instance)); + + /* Set the TIM channel(s) state */ + if (Channel == TIM_CHANNEL_1) + { + if ((channel_1_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_1_state != HAL_TIM_CHANNEL_STATE_READY)) + { + return HAL_ERROR; + } + else + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + } + } + else if (Channel == TIM_CHANNEL_2) + { + if ((channel_2_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_2_state != HAL_TIM_CHANNEL_STATE_READY)) + { + return HAL_ERROR; + } + else + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + } + } + else + { + if ((channel_1_state != HAL_TIM_CHANNEL_STATE_READY) + || (channel_2_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_1_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_2_state != HAL_TIM_CHANNEL_STATE_READY)) + { + return HAL_ERROR; + } + else + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + } + } /* Enable the encoder interface channels */ /* Enable the capture compare Interrupts 1 and/or 2 */ @@ -2912,7 +3460,7 @@ HAL_StatusTypeDef HAL_TIM_Encoder_Start_IT(TIM_HandleTypeDef *htim, uint32_t Cha HAL_StatusTypeDef HAL_TIM_Encoder_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel) { /* Check the parameters */ - assert_param(IS_TIM_CC2_INSTANCE(htim->Instance)); + assert_param(IS_TIM_ENCODER_INTERFACE_INSTANCE(htim->Instance)); /* Disable the Input Capture channels 1 and 2 (in the EncoderInterface the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2) */ @@ -2943,8 +3491,19 @@ HAL_StatusTypeDef HAL_TIM_Encoder_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Chan /* Disable the Peripheral */ __HAL_TIM_DISABLE(htim); - /* Change the htim state */ - htim->State = HAL_TIM_STATE_READY; + /* Set the TIM channel(s) state */ + if ((Channel == TIM_CHANNEL_1) || (Channel == TIM_CHANNEL_2)) + { + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + } + else + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + } /* Return function status */ return HAL_OK; @@ -2966,27 +3525,95 @@ HAL_StatusTypeDef HAL_TIM_Encoder_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Chan HAL_StatusTypeDef HAL_TIM_Encoder_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData1, uint32_t *pData2, uint16_t Length) { - /* Check the parameters */ - assert_param(IS_TIM_DMA_CC_INSTANCE(htim->Instance)); + HAL_TIM_ChannelStateTypeDef channel_1_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef channel_2_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_2); + HAL_TIM_ChannelStateTypeDef complementary_channel_1_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef complementary_channel_2_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_2); - if (htim->State == HAL_TIM_STATE_BUSY) + /* Check the parameters */ + assert_param(IS_TIM_ENCODER_INTERFACE_INSTANCE(htim->Instance)); + + /* Set the TIM channel(s) state */ + if (Channel == TIM_CHANNEL_1) { - return HAL_BUSY; - } - else if (htim->State == HAL_TIM_STATE_READY) - { - if ((((pData1 == NULL) || (pData2 == NULL))) && (Length > 0U)) + if ((channel_1_state == HAL_TIM_CHANNEL_STATE_BUSY) + || (complementary_channel_1_state == HAL_TIM_CHANNEL_STATE_BUSY)) { - return HAL_ERROR; + return HAL_BUSY; + } + else if ((channel_1_state == HAL_TIM_CHANNEL_STATE_READY) + && (complementary_channel_1_state == HAL_TIM_CHANNEL_STATE_READY)) + { + if ((pData1 == NULL) && (Length > 0U)) + { + return HAL_ERROR; + } + else + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + } } else { - htim->State = HAL_TIM_STATE_BUSY; + return HAL_ERROR; + } + } + else if (Channel == TIM_CHANNEL_2) + { + if ((channel_2_state == HAL_TIM_CHANNEL_STATE_BUSY) + || (complementary_channel_2_state == HAL_TIM_CHANNEL_STATE_BUSY)) + { + return HAL_BUSY; + } + else if ((channel_2_state == HAL_TIM_CHANNEL_STATE_READY) + && (complementary_channel_2_state == HAL_TIM_CHANNEL_STATE_READY)) + { + if ((pData2 == NULL) && (Length > 0U)) + { + return HAL_ERROR; + } + else + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + } + } + else + { + return HAL_ERROR; } } else { - /* nothing to do */ + if ((channel_1_state == HAL_TIM_CHANNEL_STATE_BUSY) + || (channel_2_state == HAL_TIM_CHANNEL_STATE_BUSY) + || (complementary_channel_1_state == HAL_TIM_CHANNEL_STATE_BUSY) + || (complementary_channel_2_state == HAL_TIM_CHANNEL_STATE_BUSY)) + { + return HAL_BUSY; + } + else if ((channel_1_state == HAL_TIM_CHANNEL_STATE_READY) + && (channel_2_state == HAL_TIM_CHANNEL_STATE_READY) + && (complementary_channel_1_state == HAL_TIM_CHANNEL_STATE_READY) + && (complementary_channel_2_state == HAL_TIM_CHANNEL_STATE_READY)) + { + if ((((pData1 == NULL) || (pData2 == NULL))) && (Length > 0U)) + { + return HAL_ERROR; + } + else + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + } + } + else + { + return HAL_ERROR; + } } switch (Channel) @@ -3001,18 +3628,21 @@ HAL_StatusTypeDef HAL_TIM_Encoder_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Ch htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ; /* Enable the DMA stream */ - if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)&htim->Instance->CCR1, (uint32_t)pData1, Length) != HAL_OK) + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)&htim->Instance->CCR1, (uint32_t)pData1, + Length) != HAL_OK) { + /* Return error status */ return HAL_ERROR; } /* Enable the TIM Input Capture DMA request */ __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1); + /* Enable the Capture compare channel */ + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE); + /* Enable the Peripheral */ __HAL_TIM_ENABLE(htim); - /* Enable the Capture compare channel */ - TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE); break; } @@ -3025,22 +3655,25 @@ HAL_StatusTypeDef HAL_TIM_Encoder_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Ch /* Set the DMA error callback */ htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError; /* Enable the DMA stream */ - if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)&htim->Instance->CCR2, (uint32_t)pData2, Length) != HAL_OK) + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)&htim->Instance->CCR2, (uint32_t)pData2, + Length) != HAL_OK) { + /* Return error status */ return HAL_ERROR; } /* Enable the TIM Input Capture DMA request */ __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2); + /* Enable the Capture compare channel */ + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE); + /* Enable the Peripheral */ __HAL_TIM_ENABLE(htim); - /* Enable the Capture compare channel */ - TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE); break; } - case TIM_CHANNEL_ALL: + default: { /* Set the DMA capture callbacks */ htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMACaptureCplt; @@ -3050,8 +3683,10 @@ HAL_StatusTypeDef HAL_TIM_Encoder_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Ch htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ; /* Enable the DMA stream */ - if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)&htim->Instance->CCR1, (uint32_t)pData1, Length) != HAL_OK) + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)&htim->Instance->CCR1, (uint32_t)pData1, + Length) != HAL_OK) { + /* Return error status */ return HAL_ERROR; } @@ -3063,27 +3698,29 @@ HAL_StatusTypeDef HAL_TIM_Encoder_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Ch htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError ; /* Enable the DMA stream */ - if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)&htim->Instance->CCR2, (uint32_t)pData2, Length) != HAL_OK) + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)&htim->Instance->CCR2, (uint32_t)pData2, + Length) != HAL_OK) { + /* Return error status */ return HAL_ERROR; } - /* Enable the Peripheral */ - __HAL_TIM_ENABLE(htim); - - /* Enable the Capture compare channel */ - TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE); - TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE); /* Enable the TIM Input Capture DMA request */ __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1); /* Enable the TIM Input Capture DMA request */ __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2); + + /* Enable the Capture compare channel */ + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE); + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE); + + /* Enable the Peripheral */ + __HAL_TIM_ENABLE(htim); + break; } - - default: - break; } + /* Return function status */ return HAL_OK; } @@ -3101,7 +3738,7 @@ HAL_StatusTypeDef HAL_TIM_Encoder_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Ch HAL_StatusTypeDef HAL_TIM_Encoder_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel) { /* Check the parameters */ - assert_param(IS_TIM_DMA_CC_INSTANCE(htim->Instance)); + assert_param(IS_TIM_ENCODER_INTERFACE_INSTANCE(htim->Instance)); /* Disable the Input Capture channels 1 and 2 (in the EncoderInterface the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2) */ @@ -3136,8 +3773,19 @@ HAL_StatusTypeDef HAL_TIM_Encoder_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Cha /* Disable the Peripheral */ __HAL_TIM_DISABLE(htim); - /* Change the htim state */ - htim->State = HAL_TIM_STATE_READY; + /* Set the TIM channel(s) state */ + if ((Channel == TIM_CHANNEL_1) || (Channel == TIM_CHANNEL_2)) + { + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + } + else + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + } /* Return function status */ return HAL_OK; @@ -3383,6 +4031,8 @@ HAL_StatusTypeDef HAL_TIM_OC_ConfigChannel(TIM_HandleTypeDef *htim, TIM_OC_InitTypeDef *sConfig, uint32_t Channel) { + HAL_StatusTypeDef status = HAL_OK; + /* Check the parameters */ assert_param(IS_TIM_CHANNELS(Channel)); assert_param(IS_TIM_OC_MODE(sConfig->OCMode)); @@ -3391,8 +4041,6 @@ HAL_StatusTypeDef HAL_TIM_OC_ConfigChannel(TIM_HandleTypeDef *htim, /* Process Locked */ __HAL_LOCK(htim); - htim->State = HAL_TIM_STATE_BUSY; - switch (Channel) { case TIM_CHANNEL_1: @@ -3436,14 +4084,13 @@ HAL_StatusTypeDef HAL_TIM_OC_ConfigChannel(TIM_HandleTypeDef *htim, } default: + status = HAL_ERROR; break; } - htim->State = HAL_TIM_STATE_READY; - __HAL_UNLOCK(htim); - return HAL_OK; + return status; } /** @@ -3461,6 +4108,8 @@ HAL_StatusTypeDef HAL_TIM_OC_ConfigChannel(TIM_HandleTypeDef *htim, */ HAL_StatusTypeDef HAL_TIM_IC_ConfigChannel(TIM_HandleTypeDef *htim, TIM_IC_InitTypeDef *sConfig, uint32_t Channel) { + HAL_StatusTypeDef status = HAL_OK; + /* Check the parameters */ assert_param(IS_TIM_CC1_INSTANCE(htim->Instance)); assert_param(IS_TIM_IC_POLARITY(sConfig->ICPolarity)); @@ -3471,8 +4120,6 @@ HAL_StatusTypeDef HAL_TIM_IC_ConfigChannel(TIM_HandleTypeDef *htim, TIM_IC_InitT /* Process Locked */ __HAL_LOCK(htim); - htim->State = HAL_TIM_STATE_BUSY; - if (Channel == TIM_CHANNEL_1) { /* TI1 Configuration */ @@ -3519,7 +4166,7 @@ HAL_StatusTypeDef HAL_TIM_IC_ConfigChannel(TIM_HandleTypeDef *htim, TIM_IC_InitT /* Set the IC3PSC value */ htim->Instance->CCMR2 |= sConfig->ICPrescaler; } - else + else if (Channel == TIM_CHANNEL_4) { /* TI4 Configuration */ assert_param(IS_TIM_CC4_INSTANCE(htim->Instance)); @@ -3535,12 +4182,14 @@ HAL_StatusTypeDef HAL_TIM_IC_ConfigChannel(TIM_HandleTypeDef *htim, TIM_IC_InitT /* Set the IC4PSC value */ htim->Instance->CCMR2 |= (sConfig->ICPrescaler << 8U); } - - htim->State = HAL_TIM_STATE_READY; + else + { + status = HAL_ERROR; + } __HAL_UNLOCK(htim); - return HAL_OK; + return status; } /** @@ -3560,6 +4209,8 @@ HAL_StatusTypeDef HAL_TIM_PWM_ConfigChannel(TIM_HandleTypeDef *htim, TIM_OC_InitTypeDef *sConfig, uint32_t Channel) { + HAL_StatusTypeDef status = HAL_OK; + /* Check the parameters */ assert_param(IS_TIM_CHANNELS(Channel)); assert_param(IS_TIM_PWM_MODE(sConfig->OCMode)); @@ -3569,8 +4220,6 @@ HAL_StatusTypeDef HAL_TIM_PWM_ConfigChannel(TIM_HandleTypeDef *htim, /* Process Locked */ __HAL_LOCK(htim); - htim->State = HAL_TIM_STATE_BUSY; - switch (Channel) { case TIM_CHANNEL_1: @@ -3642,14 +4291,13 @@ HAL_StatusTypeDef HAL_TIM_PWM_ConfigChannel(TIM_HandleTypeDef *htim, } default: + status = HAL_ERROR; break; } - htim->State = HAL_TIM_STATE_READY; - __HAL_UNLOCK(htim); - return HAL_OK; + return status; } /** @@ -3674,6 +4322,7 @@ HAL_StatusTypeDef HAL_TIM_PWM_ConfigChannel(TIM_HandleTypeDef *htim, HAL_StatusTypeDef HAL_TIM_OnePulse_ConfigChannel(TIM_HandleTypeDef *htim, TIM_OnePulse_InitTypeDef *sConfig, uint32_t OutputChannel, uint32_t InputChannel) { + HAL_StatusTypeDef status = HAL_OK; TIM_OC_InitTypeDef temp1; /* Check the parameters */ @@ -3704,6 +4353,7 @@ HAL_StatusTypeDef HAL_TIM_OnePulse_ConfigChannel(TIM_HandleTypeDef *htim, TIM_O TIM_OC1_SetConfig(htim->Instance, &temp1); break; } + case TIM_CHANNEL_2: { assert_param(IS_TIM_CC2_INSTANCE(htim->Instance)); @@ -3711,60 +4361,67 @@ HAL_StatusTypeDef HAL_TIM_OnePulse_ConfigChannel(TIM_HandleTypeDef *htim, TIM_O TIM_OC2_SetConfig(htim->Instance, &temp1); break; } + default: + status = HAL_ERROR; break; } - switch (InputChannel) + if (status == HAL_OK) { - case TIM_CHANNEL_1: + switch (InputChannel) { - assert_param(IS_TIM_CC1_INSTANCE(htim->Instance)); + case TIM_CHANNEL_1: + { + assert_param(IS_TIM_CC1_INSTANCE(htim->Instance)); - TIM_TI1_SetConfig(htim->Instance, sConfig->ICPolarity, - sConfig->ICSelection, sConfig->ICFilter); + TIM_TI1_SetConfig(htim->Instance, sConfig->ICPolarity, + sConfig->ICSelection, sConfig->ICFilter); - /* Reset the IC1PSC Bits */ - htim->Instance->CCMR1 &= ~TIM_CCMR1_IC1PSC; + /* Reset the IC1PSC Bits */ + htim->Instance->CCMR1 &= ~TIM_CCMR1_IC1PSC; - /* Select the Trigger source */ - htim->Instance->SMCR &= ~TIM_SMCR_TS; - htim->Instance->SMCR |= TIM_TS_TI1FP1; + /* Select the Trigger source */ + htim->Instance->SMCR &= ~TIM_SMCR_TS; + htim->Instance->SMCR |= TIM_TS_TI1FP1; - /* Select the Slave Mode */ - htim->Instance->SMCR &= ~TIM_SMCR_SMS; - htim->Instance->SMCR |= TIM_SLAVEMODE_TRIGGER; - break; + /* Select the Slave Mode */ + htim->Instance->SMCR &= ~TIM_SMCR_SMS; + htim->Instance->SMCR |= TIM_SLAVEMODE_TRIGGER; + break; + } + + case TIM_CHANNEL_2: + { + assert_param(IS_TIM_CC2_INSTANCE(htim->Instance)); + + TIM_TI2_SetConfig(htim->Instance, sConfig->ICPolarity, + sConfig->ICSelection, sConfig->ICFilter); + + /* Reset the IC2PSC Bits */ + htim->Instance->CCMR1 &= ~TIM_CCMR1_IC2PSC; + + /* Select the Trigger source */ + htim->Instance->SMCR &= ~TIM_SMCR_TS; + htim->Instance->SMCR |= TIM_TS_TI2FP2; + + /* Select the Slave Mode */ + htim->Instance->SMCR &= ~TIM_SMCR_SMS; + htim->Instance->SMCR |= TIM_SLAVEMODE_TRIGGER; + break; + } + + default: + status = HAL_ERROR; + break; } - case TIM_CHANNEL_2: - { - assert_param(IS_TIM_CC2_INSTANCE(htim->Instance)); - - TIM_TI2_SetConfig(htim->Instance, sConfig->ICPolarity, - sConfig->ICSelection, sConfig->ICFilter); - - /* Reset the IC2PSC Bits */ - htim->Instance->CCMR1 &= ~TIM_CCMR1_IC2PSC; - - /* Select the Trigger source */ - htim->Instance->SMCR &= ~TIM_SMCR_TS; - htim->Instance->SMCR |= TIM_TS_TI2FP2; - - /* Select the Slave Mode */ - htim->Instance->SMCR &= ~TIM_SMCR_SMS; - htim->Instance->SMCR |= TIM_SLAVEMODE_TRIGGER; - break; - } - - default: - break; } htim->State = HAL_TIM_STATE_READY; __HAL_UNLOCK(htim); - return HAL_OK; + return status; } else { @@ -3810,20 +4467,78 @@ HAL_StatusTypeDef HAL_TIM_OnePulse_ConfigChannel(TIM_HandleTypeDef *htim, TIM_O * @note This function should be used only when BurstLength is equal to DMA data transfer length. * @retval HAL status */ -HAL_StatusTypeDef HAL_TIM_DMABurst_WriteStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, uint32_t BurstRequestSrc, - uint32_t *BurstBuffer, uint32_t BurstLength) +HAL_StatusTypeDef HAL_TIM_DMABurst_WriteStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, + uint32_t BurstRequestSrc, uint32_t *BurstBuffer, uint32_t BurstLength) { + HAL_StatusTypeDef status = HAL_OK; + + if (status == HAL_OK) + { + status = HAL_TIM_DMABurst_MultiWriteStart(htim, BurstBaseAddress, BurstRequestSrc, BurstBuffer, BurstLength, + ((BurstLength) >> 8U) + 1U); + } + + + return status; +} + +/** + * @brief Configure the DMA Burst to transfer multiple Data from the memory to the TIM peripheral + * @param htim TIM handle + * @param BurstBaseAddress TIM Base address from where the DMA will start the Data write + * This parameter can be one of the following values: + * @arg TIM_DMABASE_CR1 + * @arg TIM_DMABASE_CR2 + * @arg TIM_DMABASE_SMCR + * @arg TIM_DMABASE_DIER + * @arg TIM_DMABASE_SR + * @arg TIM_DMABASE_EGR + * @arg TIM_DMABASE_CCMR1 + * @arg TIM_DMABASE_CCMR2 + * @arg TIM_DMABASE_CCER + * @arg TIM_DMABASE_CNT + * @arg TIM_DMABASE_PSC + * @arg TIM_DMABASE_ARR + * @arg TIM_DMABASE_RCR + * @arg TIM_DMABASE_CCR1 + * @arg TIM_DMABASE_CCR2 + * @arg TIM_DMABASE_CCR3 + * @arg TIM_DMABASE_CCR4 + * @arg TIM_DMABASE_BDTR + * @param BurstRequestSrc TIM DMA Request sources + * This parameter can be one of the following values: + * @arg TIM_DMA_UPDATE: TIM update Interrupt source + * @arg TIM_DMA_CC1: TIM Capture Compare 1 DMA source + * @arg TIM_DMA_CC2: TIM Capture Compare 2 DMA source + * @arg TIM_DMA_CC3: TIM Capture Compare 3 DMA source + * @arg TIM_DMA_CC4: TIM Capture Compare 4 DMA source + * @arg TIM_DMA_COM: TIM Commutation DMA source + * @arg TIM_DMA_TRIGGER: TIM Trigger DMA source + * @param BurstBuffer The Buffer address. + * @param BurstLength DMA Burst length. This parameter can be one value + * between: TIM_DMABURSTLENGTH_1TRANSFER and TIM_DMABURSTLENGTH_18TRANSFERS. + * @param DataLength Data length. This parameter can be one value + * between 1 and 0xFFFF. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_DMABurst_MultiWriteStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, + uint32_t BurstRequestSrc, uint32_t *BurstBuffer, + uint32_t BurstLength, uint32_t DataLength) +{ + HAL_StatusTypeDef status = HAL_OK; + /* Check the parameters */ assert_param(IS_TIM_DMABURST_INSTANCE(htim->Instance)); assert_param(IS_TIM_DMA_BASE(BurstBaseAddress)); assert_param(IS_TIM_DMA_SOURCE(BurstRequestSrc)); assert_param(IS_TIM_DMA_LENGTH(BurstLength)); + assert_param(IS_TIM_DMA_DATA_LENGTH(DataLength)); - if (htim->State == HAL_TIM_STATE_BUSY) + if (htim->DMABurstState == HAL_DMA_BURST_STATE_BUSY) { return HAL_BUSY; } - else if (htim->State == HAL_TIM_STATE_READY) + else if (htim->DMABurstState == HAL_DMA_BURST_STATE_READY) { if ((BurstBuffer == NULL) && (BurstLength > 0U)) { @@ -3831,13 +4546,14 @@ HAL_StatusTypeDef HAL_TIM_DMABurst_WriteStart(TIM_HandleTypeDef *htim, uint32_t } else { - htim->State = HAL_TIM_STATE_BUSY; + htim->DMABurstState = HAL_DMA_BURST_STATE_BUSY; } } else { /* nothing to do */ } + switch (BurstRequestSrc) { case TIM_DMA_UPDATE: @@ -3850,8 +4566,10 @@ HAL_StatusTypeDef HAL_TIM_DMABurst_WriteStart(TIM_HandleTypeDef *htim, uint32_t htim->hdma[TIM_DMA_ID_UPDATE]->XferErrorCallback = TIM_DMAError ; /* Enable the DMA stream */ - if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_UPDATE], (uint32_t)BurstBuffer, (uint32_t)&htim->Instance->DMAR, ((BurstLength) >> 8U) + 1U) != HAL_OK) + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_UPDATE], (uint32_t)BurstBuffer, + (uint32_t)&htim->Instance->DMAR, DataLength) != HAL_OK) { + /* Return error status */ return HAL_ERROR; } break; @@ -3867,8 +4585,9 @@ HAL_StatusTypeDef HAL_TIM_DMABurst_WriteStart(TIM_HandleTypeDef *htim, uint32_t /* Enable the DMA stream */ if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)BurstBuffer, - (uint32_t)&htim->Instance->DMAR, ((BurstLength) >> 8U) + 1U) != HAL_OK) + (uint32_t)&htim->Instance->DMAR, DataLength) != HAL_OK) { + /* Return error status */ return HAL_ERROR; } break; @@ -3884,8 +4603,9 @@ HAL_StatusTypeDef HAL_TIM_DMABurst_WriteStart(TIM_HandleTypeDef *htim, uint32_t /* Enable the DMA stream */ if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)BurstBuffer, - (uint32_t)&htim->Instance->DMAR, ((BurstLength) >> 8U) + 1U) != HAL_OK) + (uint32_t)&htim->Instance->DMAR, DataLength) != HAL_OK) { + /* Return error status */ return HAL_ERROR; } break; @@ -3901,8 +4621,9 @@ HAL_StatusTypeDef HAL_TIM_DMABurst_WriteStart(TIM_HandleTypeDef *htim, uint32_t /* Enable the DMA stream */ if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)BurstBuffer, - (uint32_t)&htim->Instance->DMAR, ((BurstLength) >> 8U) + 1U) != HAL_OK) + (uint32_t)&htim->Instance->DMAR, DataLength) != HAL_OK) { + /* Return error status */ return HAL_ERROR; } break; @@ -3918,8 +4639,9 @@ HAL_StatusTypeDef HAL_TIM_DMABurst_WriteStart(TIM_HandleTypeDef *htim, uint32_t /* Enable the DMA stream */ if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC4], (uint32_t)BurstBuffer, - (uint32_t)&htim->Instance->DMAR, ((BurstLength) >> 8U) + 1U) != HAL_OK) + (uint32_t)&htim->Instance->DMAR, DataLength) != HAL_OK) { + /* Return error status */ return HAL_ERROR; } break; @@ -3935,8 +4657,9 @@ HAL_StatusTypeDef HAL_TIM_DMABurst_WriteStart(TIM_HandleTypeDef *htim, uint32_t /* Enable the DMA stream */ if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_COMMUTATION], (uint32_t)BurstBuffer, - (uint32_t)&htim->Instance->DMAR, ((BurstLength) >> 8U) + 1U) != HAL_OK) + (uint32_t)&htim->Instance->DMAR, DataLength) != HAL_OK) { + /* Return error status */ return HAL_ERROR; } break; @@ -3952,25 +4675,28 @@ HAL_StatusTypeDef HAL_TIM_DMABurst_WriteStart(TIM_HandleTypeDef *htim, uint32_t /* Enable the DMA stream */ if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_TRIGGER], (uint32_t)BurstBuffer, - (uint32_t)&htim->Instance->DMAR, ((BurstLength) >> 8U) + 1U) != HAL_OK) + (uint32_t)&htim->Instance->DMAR, DataLength) != HAL_OK) { + /* Return error status */ return HAL_ERROR; } break; } default: + status = HAL_ERROR; break; } - /* configure the DMA Burst Mode */ - htim->Instance->DCR = (BurstBaseAddress | BurstLength); - /* Enable the TIM DMA Request */ - __HAL_TIM_ENABLE_DMA(htim, BurstRequestSrc); - - htim->State = HAL_TIM_STATE_READY; + if (status == HAL_OK) + { + /* Configure the DMA Burst Mode */ + htim->Instance->DCR = (BurstBaseAddress | BurstLength); + /* Enable the TIM DMA Request */ + __HAL_TIM_ENABLE_DMA(htim, BurstRequestSrc); + } /* Return function status */ - return HAL_OK; + return status; } /** @@ -3982,6 +4708,7 @@ HAL_StatusTypeDef HAL_TIM_DMABurst_WriteStart(TIM_HandleTypeDef *htim, uint32_t HAL_StatusTypeDef HAL_TIM_DMABurst_WriteStop(TIM_HandleTypeDef *htim, uint32_t BurstRequestSrc) { HAL_StatusTypeDef status = HAL_OK; + /* Check the parameters */ assert_param(IS_TIM_DMA_SOURCE(BurstRequestSrc)); @@ -3990,47 +4717,51 @@ HAL_StatusTypeDef HAL_TIM_DMABurst_WriteStop(TIM_HandleTypeDef *htim, uint32_t B { case TIM_DMA_UPDATE: { - status = HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_UPDATE]); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_UPDATE]); break; } case TIM_DMA_CC1: { - status = HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC1]); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC1]); break; } case TIM_DMA_CC2: { - status = HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC2]); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC2]); break; } case TIM_DMA_CC3: { - status = HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC3]); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC3]); break; } case TIM_DMA_CC4: { - status = HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC4]); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC4]); break; } case TIM_DMA_COM: { - status = HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_COMMUTATION]); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_COMMUTATION]); break; } case TIM_DMA_TRIGGER: { - status = HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_TRIGGER]); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_TRIGGER]); break; } default: + status = HAL_ERROR; break; } - if (HAL_OK == status) + if (status == HAL_OK) { /* Disable the TIM Update DMA request */ __HAL_TIM_DISABLE_DMA(htim, BurstRequestSrc); + + /* Change the DMA burst operation state */ + htim->DMABurstState = HAL_DMA_BURST_STATE_READY; } /* Return function status */ @@ -4078,17 +4809,74 @@ HAL_StatusTypeDef HAL_TIM_DMABurst_WriteStop(TIM_HandleTypeDef *htim, uint32_t B HAL_StatusTypeDef HAL_TIM_DMABurst_ReadStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, uint32_t BurstRequestSrc, uint32_t *BurstBuffer, uint32_t BurstLength) { + HAL_StatusTypeDef status = HAL_OK; + + if (status == HAL_OK) + { + status = HAL_TIM_DMABurst_MultiReadStart(htim, BurstBaseAddress, BurstRequestSrc, BurstBuffer, BurstLength, + ((BurstLength) >> 8U) + 1U); + } + + return status; +} + +/** + * @brief Configure the DMA Burst to transfer Data from the TIM peripheral to the memory + * @param htim TIM handle + * @param BurstBaseAddress TIM Base address from where the DMA will start the Data read + * This parameter can be one of the following values: + * @arg TIM_DMABASE_CR1 + * @arg TIM_DMABASE_CR2 + * @arg TIM_DMABASE_SMCR + * @arg TIM_DMABASE_DIER + * @arg TIM_DMABASE_SR + * @arg TIM_DMABASE_EGR + * @arg TIM_DMABASE_CCMR1 + * @arg TIM_DMABASE_CCMR2 + * @arg TIM_DMABASE_CCER + * @arg TIM_DMABASE_CNT + * @arg TIM_DMABASE_PSC + * @arg TIM_DMABASE_ARR + * @arg TIM_DMABASE_RCR + * @arg TIM_DMABASE_CCR1 + * @arg TIM_DMABASE_CCR2 + * @arg TIM_DMABASE_CCR3 + * @arg TIM_DMABASE_CCR4 + * @arg TIM_DMABASE_BDTR + * @param BurstRequestSrc TIM DMA Request sources + * This parameter can be one of the following values: + * @arg TIM_DMA_UPDATE: TIM update Interrupt source + * @arg TIM_DMA_CC1: TIM Capture Compare 1 DMA source + * @arg TIM_DMA_CC2: TIM Capture Compare 2 DMA source + * @arg TIM_DMA_CC3: TIM Capture Compare 3 DMA source + * @arg TIM_DMA_CC4: TIM Capture Compare 4 DMA source + * @arg TIM_DMA_COM: TIM Commutation DMA source + * @arg TIM_DMA_TRIGGER: TIM Trigger DMA source + * @param BurstBuffer The Buffer address. + * @param BurstLength DMA Burst length. This parameter can be one value + * between: TIM_DMABURSTLENGTH_1TRANSFER and TIM_DMABURSTLENGTH_18TRANSFERS. + * @param DataLength Data length. This parameter can be one value + * between 1 and 0xFFFF. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_DMABurst_MultiReadStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, + uint32_t BurstRequestSrc, uint32_t *BurstBuffer, + uint32_t BurstLength, uint32_t DataLength) +{ + HAL_StatusTypeDef status = HAL_OK; + /* Check the parameters */ assert_param(IS_TIM_DMABURST_INSTANCE(htim->Instance)); assert_param(IS_TIM_DMA_BASE(BurstBaseAddress)); assert_param(IS_TIM_DMA_SOURCE(BurstRequestSrc)); assert_param(IS_TIM_DMA_LENGTH(BurstLength)); + assert_param(IS_TIM_DMA_DATA_LENGTH(DataLength)); - if (htim->State == HAL_TIM_STATE_BUSY) + if (htim->DMABurstState == HAL_DMA_BURST_STATE_BUSY) { return HAL_BUSY; } - else if (htim->State == HAL_TIM_STATE_READY) + else if (htim->DMABurstState == HAL_DMA_BURST_STATE_READY) { if ((BurstBuffer == NULL) && (BurstLength > 0U)) { @@ -4096,7 +4884,7 @@ HAL_StatusTypeDef HAL_TIM_DMABurst_ReadStart(TIM_HandleTypeDef *htim, uint32_t B } else { - htim->State = HAL_TIM_STATE_BUSY; + htim->DMABurstState = HAL_DMA_BURST_STATE_BUSY; } } else @@ -4115,8 +4903,10 @@ HAL_StatusTypeDef HAL_TIM_DMABurst_ReadStart(TIM_HandleTypeDef *htim, uint32_t B htim->hdma[TIM_DMA_ID_UPDATE]->XferErrorCallback = TIM_DMAError ; /* Enable the DMA stream */ - if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_UPDATE], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, ((BurstLength) >> 8U) + 1U) != HAL_OK) + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_UPDATE], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, + DataLength) != HAL_OK) { + /* Return error status */ return HAL_ERROR; } break; @@ -4131,15 +4921,17 @@ HAL_StatusTypeDef HAL_TIM_DMABurst_ReadStart(TIM_HandleTypeDef *htim, uint32_t B htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ; /* Enable the DMA stream */ - if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, ((BurstLength) >> 8U) + 1U) != HAL_OK) + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, + DataLength) != HAL_OK) { + /* Return error status */ return HAL_ERROR; } break; } case TIM_DMA_CC2: { - /* Set the DMA capture/compare callbacks */ + /* Set the DMA capture callbacks */ htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMACaptureCplt; htim->hdma[TIM_DMA_ID_CC2]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt; @@ -4147,8 +4939,10 @@ HAL_StatusTypeDef HAL_TIM_DMABurst_ReadStart(TIM_HandleTypeDef *htim, uint32_t B htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError ; /* Enable the DMA stream */ - if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, ((BurstLength) >> 8U) + 1U) != HAL_OK) + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, + DataLength) != HAL_OK) { + /* Return error status */ return HAL_ERROR; } break; @@ -4163,8 +4957,10 @@ HAL_StatusTypeDef HAL_TIM_DMABurst_ReadStart(TIM_HandleTypeDef *htim, uint32_t B htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = TIM_DMAError ; /* Enable the DMA stream */ - if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, ((BurstLength) >> 8U) + 1U) != HAL_OK) + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, + DataLength) != HAL_OK) { + /* Return error status */ return HAL_ERROR; } break; @@ -4179,8 +4975,10 @@ HAL_StatusTypeDef HAL_TIM_DMABurst_ReadStart(TIM_HandleTypeDef *htim, uint32_t B htim->hdma[TIM_DMA_ID_CC4]->XferErrorCallback = TIM_DMAError ; /* Enable the DMA stream */ - if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC4], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, ((BurstLength) >> 8U) + 1U) != HAL_OK) + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC4], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, + DataLength) != HAL_OK) { + /* Return error status */ return HAL_ERROR; } break; @@ -4195,8 +4993,10 @@ HAL_StatusTypeDef HAL_TIM_DMABurst_ReadStart(TIM_HandleTypeDef *htim, uint32_t B htim->hdma[TIM_DMA_ID_COMMUTATION]->XferErrorCallback = TIM_DMAError ; /* Enable the DMA stream */ - if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_COMMUTATION], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, ((BurstLength) >> 8U) + 1U) != HAL_OK) + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_COMMUTATION], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, + DataLength) != HAL_OK) { + /* Return error status */ return HAL_ERROR; } break; @@ -4211,26 +5011,30 @@ HAL_StatusTypeDef HAL_TIM_DMABurst_ReadStart(TIM_HandleTypeDef *htim, uint32_t B htim->hdma[TIM_DMA_ID_TRIGGER]->XferErrorCallback = TIM_DMAError ; /* Enable the DMA stream */ - if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_TRIGGER], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, ((BurstLength) >> 8U) + 1U) != HAL_OK) + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_TRIGGER], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, + DataLength) != HAL_OK) { + /* Return error status */ return HAL_ERROR; } break; } default: + status = HAL_ERROR; break; } - /* configure the DMA Burst Mode */ - htim->Instance->DCR = (BurstBaseAddress | BurstLength); + if (status == HAL_OK) + { + /* Configure the DMA Burst Mode */ + htim->Instance->DCR = (BurstBaseAddress | BurstLength); - /* Enable the TIM DMA Request */ - __HAL_TIM_ENABLE_DMA(htim, BurstRequestSrc); - - htim->State = HAL_TIM_STATE_READY; + /* Enable the TIM DMA Request */ + __HAL_TIM_ENABLE_DMA(htim, BurstRequestSrc); + } /* Return function status */ - return HAL_OK; + return status; } /** @@ -4242,6 +5046,7 @@ HAL_StatusTypeDef HAL_TIM_DMABurst_ReadStart(TIM_HandleTypeDef *htim, uint32_t B HAL_StatusTypeDef HAL_TIM_DMABurst_ReadStop(TIM_HandleTypeDef *htim, uint32_t BurstRequestSrc) { HAL_StatusTypeDef status = HAL_OK; + /* Check the parameters */ assert_param(IS_TIM_DMA_SOURCE(BurstRequestSrc)); @@ -4250,47 +5055,51 @@ HAL_StatusTypeDef HAL_TIM_DMABurst_ReadStop(TIM_HandleTypeDef *htim, uint32_t Bu { case TIM_DMA_UPDATE: { - status = HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_UPDATE]); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_UPDATE]); break; } case TIM_DMA_CC1: { - status = HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC1]); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC1]); break; } case TIM_DMA_CC2: { - status = HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC2]); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC2]); break; } case TIM_DMA_CC3: { - status = HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC3]); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC3]); break; } case TIM_DMA_CC4: { - status = HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC4]); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC4]); break; } case TIM_DMA_COM: { - status = HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_COMMUTATION]); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_COMMUTATION]); break; } case TIM_DMA_TRIGGER: { - status = HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_TRIGGER]); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_TRIGGER]); break; } default: + status = HAL_ERROR; break; } - if (HAL_OK == status) + if (status == HAL_OK) { /* Disable the TIM Update DMA request */ __HAL_TIM_DISABLE_DMA(htim, BurstRequestSrc); + + /* Change the DMA burst operation state */ + htim->DMABurstState = HAL_DMA_BURST_STATE_READY; } /* Return function status */ @@ -4358,6 +5167,8 @@ HAL_StatusTypeDef HAL_TIM_ConfigOCrefClear(TIM_HandleTypeDef *htim, TIM_ClearInputConfigTypeDef *sClearInputConfig, uint32_t Channel) { + HAL_StatusTypeDef status = HAL_OK; + /* Check the parameters */ assert_param(IS_TIM_OCXREF_CLEAR_INSTANCE(htim->Instance)); assert_param(IS_TIM_CLEARINPUT_SOURCE(sClearInputConfig->ClearInputSource)); @@ -4399,76 +5210,80 @@ HAL_StatusTypeDef HAL_TIM_ConfigOCrefClear(TIM_HandleTypeDef *htim, } default: + status = HAL_ERROR; break; } - switch (Channel) + if (status == HAL_OK) { - case TIM_CHANNEL_1: + switch (Channel) { - if (sClearInputConfig->ClearInputState != (uint32_t)DISABLE) + case TIM_CHANNEL_1: { - /* Enable the OCREF clear feature for Channel 1 */ - SET_BIT(htim->Instance->CCMR1, TIM_CCMR1_OC1CE); + if (sClearInputConfig->ClearInputState != (uint32_t)DISABLE) + { + /* Enable the OCREF clear feature for Channel 1 */ + SET_BIT(htim->Instance->CCMR1, TIM_CCMR1_OC1CE); + } + else + { + /* Disable the OCREF clear feature for Channel 1 */ + CLEAR_BIT(htim->Instance->CCMR1, TIM_CCMR1_OC1CE); + } + break; } - else + case TIM_CHANNEL_2: { - /* Disable the OCREF clear feature for Channel 1 */ - CLEAR_BIT(htim->Instance->CCMR1, TIM_CCMR1_OC1CE); + if (sClearInputConfig->ClearInputState != (uint32_t)DISABLE) + { + /* Enable the OCREF clear feature for Channel 2 */ + SET_BIT(htim->Instance->CCMR1, TIM_CCMR1_OC2CE); + } + else + { + /* Disable the OCREF clear feature for Channel 2 */ + CLEAR_BIT(htim->Instance->CCMR1, TIM_CCMR1_OC2CE); + } + break; } - break; + case TIM_CHANNEL_3: + { + if (sClearInputConfig->ClearInputState != (uint32_t)DISABLE) + { + /* Enable the OCREF clear feature for Channel 3 */ + SET_BIT(htim->Instance->CCMR2, TIM_CCMR2_OC3CE); + } + else + { + /* Disable the OCREF clear feature for Channel 3 */ + CLEAR_BIT(htim->Instance->CCMR2, TIM_CCMR2_OC3CE); + } + break; + } + case TIM_CHANNEL_4: + { + if (sClearInputConfig->ClearInputState != (uint32_t)DISABLE) + { + /* Enable the OCREF clear feature for Channel 4 */ + SET_BIT(htim->Instance->CCMR2, TIM_CCMR2_OC4CE); + } + else + { + /* Disable the OCREF clear feature for Channel 4 */ + CLEAR_BIT(htim->Instance->CCMR2, TIM_CCMR2_OC4CE); + } + break; + } + default: + break; } - case TIM_CHANNEL_2: - { - if (sClearInputConfig->ClearInputState != (uint32_t)DISABLE) - { - /* Enable the OCREF clear feature for Channel 2 */ - SET_BIT(htim->Instance->CCMR1, TIM_CCMR1_OC2CE); - } - else - { - /* Disable the OCREF clear feature for Channel 2 */ - CLEAR_BIT(htim->Instance->CCMR1, TIM_CCMR1_OC2CE); - } - break; - } - case TIM_CHANNEL_3: - { - if (sClearInputConfig->ClearInputState != (uint32_t)DISABLE) - { - /* Enable the OCREF clear feature for Channel 3 */ - SET_BIT(htim->Instance->CCMR2, TIM_CCMR2_OC3CE); - } - else - { - /* Disable the OCREF clear feature for Channel 3 */ - CLEAR_BIT(htim->Instance->CCMR2, TIM_CCMR2_OC3CE); - } - break; - } - case TIM_CHANNEL_4: - { - if (sClearInputConfig->ClearInputState != (uint32_t)DISABLE) - { - /* Enable the OCREF clear feature for Channel 4 */ - SET_BIT(htim->Instance->CCMR2, TIM_CCMR2_OC4CE); - } - else - { - /* Disable the OCREF clear feature for Channel 4 */ - CLEAR_BIT(htim->Instance->CCMR2, TIM_CCMR2_OC4CE); - } - break; - } - default: - break; } htim->State = HAL_TIM_STATE_READY; __HAL_UNLOCK(htim); - return HAL_OK; + return status; } /** @@ -4480,6 +5295,7 @@ HAL_StatusTypeDef HAL_TIM_ConfigOCrefClear(TIM_HandleTypeDef *htim, */ HAL_StatusTypeDef HAL_TIM_ConfigClockSource(TIM_HandleTypeDef *htim, TIM_ClockConfigTypeDef *sClockSourceConfig) { + HAL_StatusTypeDef status = HAL_OK; uint32_t tmpsmcr; /* Process Locked */ @@ -4609,13 +5425,14 @@ HAL_StatusTypeDef HAL_TIM_ConfigClockSource(TIM_HandleTypeDef *htim, TIM_ClockCo } default: + status = HAL_ERROR; break; } htim->State = HAL_TIM_STATE_READY; __HAL_UNLOCK(htim); - return HAL_OK; + return status; } /** @@ -5136,7 +5953,7 @@ HAL_StatusTypeDef HAL_TIM_RegisterCallback(TIM_HandleTypeDef *htim, HAL_TIM_Call default : /* Return error status */ - status = HAL_ERROR; + status = HAL_ERROR; break; } } @@ -5202,14 +6019,14 @@ HAL_StatusTypeDef HAL_TIM_RegisterCallback(TIM_HandleTypeDef *htim, HAL_TIM_Call default : /* Return error status */ - status = HAL_ERROR; + status = HAL_ERROR; break; } } else { /* Return error status */ - status = HAL_ERROR; + status = HAL_ERROR; } /* Release Lock */ @@ -5265,116 +6082,143 @@ HAL_StatusTypeDef HAL_TIM_UnRegisterCallback(TIM_HandleTypeDef *htim, HAL_TIM_Ca switch (CallbackID) { case HAL_TIM_BASE_MSPINIT_CB_ID : - htim->Base_MspInitCallback = HAL_TIM_Base_MspInit; /* Legacy weak Base MspInit Callback */ + /* Legacy weak Base MspInit Callback */ + htim->Base_MspInitCallback = HAL_TIM_Base_MspInit; break; case HAL_TIM_BASE_MSPDEINIT_CB_ID : - htim->Base_MspDeInitCallback = HAL_TIM_Base_MspDeInit; /* Legacy weak Base Msp DeInit Callback */ + /* Legacy weak Base Msp DeInit Callback */ + htim->Base_MspDeInitCallback = HAL_TIM_Base_MspDeInit; break; case HAL_TIM_IC_MSPINIT_CB_ID : - htim->IC_MspInitCallback = HAL_TIM_IC_MspInit; /* Legacy weak IC Msp Init Callback */ + /* Legacy weak IC Msp Init Callback */ + htim->IC_MspInitCallback = HAL_TIM_IC_MspInit; break; case HAL_TIM_IC_MSPDEINIT_CB_ID : - htim->IC_MspDeInitCallback = HAL_TIM_IC_MspDeInit; /* Legacy weak IC Msp DeInit Callback */ + /* Legacy weak IC Msp DeInit Callback */ + htim->IC_MspDeInitCallback = HAL_TIM_IC_MspDeInit; break; case HAL_TIM_OC_MSPINIT_CB_ID : - htim->OC_MspInitCallback = HAL_TIM_OC_MspInit; /* Legacy weak OC Msp Init Callback */ + /* Legacy weak OC Msp Init Callback */ + htim->OC_MspInitCallback = HAL_TIM_OC_MspInit; break; case HAL_TIM_OC_MSPDEINIT_CB_ID : - htim->OC_MspDeInitCallback = HAL_TIM_OC_MspDeInit; /* Legacy weak OC Msp DeInit Callback */ + /* Legacy weak OC Msp DeInit Callback */ + htim->OC_MspDeInitCallback = HAL_TIM_OC_MspDeInit; break; case HAL_TIM_PWM_MSPINIT_CB_ID : - htim->PWM_MspInitCallback = HAL_TIM_PWM_MspInit; /* Legacy weak PWM Msp Init Callback */ + /* Legacy weak PWM Msp Init Callback */ + htim->PWM_MspInitCallback = HAL_TIM_PWM_MspInit; break; case HAL_TIM_PWM_MSPDEINIT_CB_ID : - htim->PWM_MspDeInitCallback = HAL_TIM_PWM_MspDeInit; /* Legacy weak PWM Msp DeInit Callback */ + /* Legacy weak PWM Msp DeInit Callback */ + htim->PWM_MspDeInitCallback = HAL_TIM_PWM_MspDeInit; break; case HAL_TIM_ONE_PULSE_MSPINIT_CB_ID : - htim->OnePulse_MspInitCallback = HAL_TIM_OnePulse_MspInit; /* Legacy weak One Pulse Msp Init Callback */ + /* Legacy weak One Pulse Msp Init Callback */ + htim->OnePulse_MspInitCallback = HAL_TIM_OnePulse_MspInit; break; case HAL_TIM_ONE_PULSE_MSPDEINIT_CB_ID : - htim->OnePulse_MspDeInitCallback = HAL_TIM_OnePulse_MspDeInit; /* Legacy weak One Pulse Msp DeInit Callback */ + /* Legacy weak One Pulse Msp DeInit Callback */ + htim->OnePulse_MspDeInitCallback = HAL_TIM_OnePulse_MspDeInit; break; case HAL_TIM_ENCODER_MSPINIT_CB_ID : - htim->Encoder_MspInitCallback = HAL_TIM_Encoder_MspInit; /* Legacy weak Encoder Msp Init Callback */ + /* Legacy weak Encoder Msp Init Callback */ + htim->Encoder_MspInitCallback = HAL_TIM_Encoder_MspInit; break; case HAL_TIM_ENCODER_MSPDEINIT_CB_ID : - htim->Encoder_MspDeInitCallback = HAL_TIM_Encoder_MspDeInit; /* Legacy weak Encoder Msp DeInit Callback */ + /* Legacy weak Encoder Msp DeInit Callback */ + htim->Encoder_MspDeInitCallback = HAL_TIM_Encoder_MspDeInit; break; case HAL_TIM_HALL_SENSOR_MSPINIT_CB_ID : - htim->HallSensor_MspInitCallback = HAL_TIMEx_HallSensor_MspInit; /* Legacy weak Hall Sensor Msp Init Callback */ + /* Legacy weak Hall Sensor Msp Init Callback */ + htim->HallSensor_MspInitCallback = HAL_TIMEx_HallSensor_MspInit; break; case HAL_TIM_HALL_SENSOR_MSPDEINIT_CB_ID : - htim->HallSensor_MspDeInitCallback = HAL_TIMEx_HallSensor_MspDeInit; /* Legacy weak Hall Sensor Msp DeInit Callback */ + /* Legacy weak Hall Sensor Msp DeInit Callback */ + htim->HallSensor_MspDeInitCallback = HAL_TIMEx_HallSensor_MspDeInit; break; case HAL_TIM_PERIOD_ELAPSED_CB_ID : - htim->PeriodElapsedCallback = HAL_TIM_PeriodElapsedCallback; /* Legacy weak Period Elapsed Callback */ + /* Legacy weak Period Elapsed Callback */ + htim->PeriodElapsedCallback = HAL_TIM_PeriodElapsedCallback; break; case HAL_TIM_PERIOD_ELAPSED_HALF_CB_ID : - htim->PeriodElapsedHalfCpltCallback = HAL_TIM_PeriodElapsedHalfCpltCallback; /* Legacy weak Period Elapsed half complete Callback */ + /* Legacy weak Period Elapsed half complete Callback */ + htim->PeriodElapsedHalfCpltCallback = HAL_TIM_PeriodElapsedHalfCpltCallback; break; case HAL_TIM_TRIGGER_CB_ID : - htim->TriggerCallback = HAL_TIM_TriggerCallback; /* Legacy weak Trigger Callback */ + /* Legacy weak Trigger Callback */ + htim->TriggerCallback = HAL_TIM_TriggerCallback; break; case HAL_TIM_TRIGGER_HALF_CB_ID : - htim->TriggerHalfCpltCallback = HAL_TIM_TriggerHalfCpltCallback; /* Legacy weak Trigger half complete Callback */ + /* Legacy weak Trigger half complete Callback */ + htim->TriggerHalfCpltCallback = HAL_TIM_TriggerHalfCpltCallback; break; case HAL_TIM_IC_CAPTURE_CB_ID : - htim->IC_CaptureCallback = HAL_TIM_IC_CaptureCallback; /* Legacy weak IC Capture Callback */ + /* Legacy weak IC Capture Callback */ + htim->IC_CaptureCallback = HAL_TIM_IC_CaptureCallback; break; case HAL_TIM_IC_CAPTURE_HALF_CB_ID : - htim->IC_CaptureHalfCpltCallback = HAL_TIM_IC_CaptureHalfCpltCallback; /* Legacy weak IC Capture half complete Callback */ + /* Legacy weak IC Capture half complete Callback */ + htim->IC_CaptureHalfCpltCallback = HAL_TIM_IC_CaptureHalfCpltCallback; break; case HAL_TIM_OC_DELAY_ELAPSED_CB_ID : - htim->OC_DelayElapsedCallback = HAL_TIM_OC_DelayElapsedCallback; /* Legacy weak OC Delay Elapsed Callback */ + /* Legacy weak OC Delay Elapsed Callback */ + htim->OC_DelayElapsedCallback = HAL_TIM_OC_DelayElapsedCallback; break; case HAL_TIM_PWM_PULSE_FINISHED_CB_ID : - htim->PWM_PulseFinishedCallback = HAL_TIM_PWM_PulseFinishedCallback; /* Legacy weak PWM Pulse Finished Callback */ + /* Legacy weak PWM Pulse Finished Callback */ + htim->PWM_PulseFinishedCallback = HAL_TIM_PWM_PulseFinishedCallback; break; case HAL_TIM_PWM_PULSE_FINISHED_HALF_CB_ID : - htim->PWM_PulseFinishedHalfCpltCallback = HAL_TIM_PWM_PulseFinishedHalfCpltCallback; /* Legacy weak PWM Pulse Finished half complete Callback */ + /* Legacy weak PWM Pulse Finished half complete Callback */ + htim->PWM_PulseFinishedHalfCpltCallback = HAL_TIM_PWM_PulseFinishedHalfCpltCallback; break; case HAL_TIM_ERROR_CB_ID : - htim->ErrorCallback = HAL_TIM_ErrorCallback; /* Legacy weak Error Callback */ + /* Legacy weak Error Callback */ + htim->ErrorCallback = HAL_TIM_ErrorCallback; break; case HAL_TIM_COMMUTATION_CB_ID : - htim->CommutationCallback = HAL_TIMEx_CommutCallback; /* Legacy weak Commutation Callback */ + /* Legacy weak Commutation Callback */ + htim->CommutationCallback = HAL_TIMEx_CommutCallback; break; case HAL_TIM_COMMUTATION_HALF_CB_ID : - htim->CommutationHalfCpltCallback = HAL_TIMEx_CommutHalfCpltCallback; /* Legacy weak Commutation half complete Callback */ + /* Legacy weak Commutation half complete Callback */ + htim->CommutationHalfCpltCallback = HAL_TIMEx_CommutHalfCpltCallback; break; case HAL_TIM_BREAK_CB_ID : - htim->BreakCallback = HAL_TIMEx_BreakCallback; /* Legacy weak Break Callback */ + /* Legacy weak Break Callback */ + htim->BreakCallback = HAL_TIMEx_BreakCallback; break; default : /* Return error status */ - status = HAL_ERROR; + status = HAL_ERROR; break; } } @@ -5383,71 +6227,85 @@ HAL_StatusTypeDef HAL_TIM_UnRegisterCallback(TIM_HandleTypeDef *htim, HAL_TIM_Ca switch (CallbackID) { case HAL_TIM_BASE_MSPINIT_CB_ID : - htim->Base_MspInitCallback = HAL_TIM_Base_MspInit; /* Legacy weak Base MspInit Callback */ + /* Legacy weak Base MspInit Callback */ + htim->Base_MspInitCallback = HAL_TIM_Base_MspInit; break; case HAL_TIM_BASE_MSPDEINIT_CB_ID : - htim->Base_MspDeInitCallback = HAL_TIM_Base_MspDeInit; /* Legacy weak Base Msp DeInit Callback */ + /* Legacy weak Base Msp DeInit Callback */ + htim->Base_MspDeInitCallback = HAL_TIM_Base_MspDeInit; break; case HAL_TIM_IC_MSPINIT_CB_ID : - htim->IC_MspInitCallback = HAL_TIM_IC_MspInit; /* Legacy weak IC Msp Init Callback */ + /* Legacy weak IC Msp Init Callback */ + htim->IC_MspInitCallback = HAL_TIM_IC_MspInit; break; case HAL_TIM_IC_MSPDEINIT_CB_ID : - htim->IC_MspDeInitCallback = HAL_TIM_IC_MspDeInit; /* Legacy weak IC Msp DeInit Callback */ + /* Legacy weak IC Msp DeInit Callback */ + htim->IC_MspDeInitCallback = HAL_TIM_IC_MspDeInit; break; case HAL_TIM_OC_MSPINIT_CB_ID : - htim->OC_MspInitCallback = HAL_TIM_OC_MspInit; /* Legacy weak OC Msp Init Callback */ + /* Legacy weak OC Msp Init Callback */ + htim->OC_MspInitCallback = HAL_TIM_OC_MspInit; break; case HAL_TIM_OC_MSPDEINIT_CB_ID : - htim->OC_MspDeInitCallback = HAL_TIM_OC_MspDeInit; /* Legacy weak OC Msp DeInit Callback */ + /* Legacy weak OC Msp DeInit Callback */ + htim->OC_MspDeInitCallback = HAL_TIM_OC_MspDeInit; break; case HAL_TIM_PWM_MSPINIT_CB_ID : - htim->PWM_MspInitCallback = HAL_TIM_PWM_MspInit; /* Legacy weak PWM Msp Init Callback */ + /* Legacy weak PWM Msp Init Callback */ + htim->PWM_MspInitCallback = HAL_TIM_PWM_MspInit; break; case HAL_TIM_PWM_MSPDEINIT_CB_ID : - htim->PWM_MspDeInitCallback = HAL_TIM_PWM_MspDeInit; /* Legacy weak PWM Msp DeInit Callback */ + /* Legacy weak PWM Msp DeInit Callback */ + htim->PWM_MspDeInitCallback = HAL_TIM_PWM_MspDeInit; break; case HAL_TIM_ONE_PULSE_MSPINIT_CB_ID : - htim->OnePulse_MspInitCallback = HAL_TIM_OnePulse_MspInit; /* Legacy weak One Pulse Msp Init Callback */ + /* Legacy weak One Pulse Msp Init Callback */ + htim->OnePulse_MspInitCallback = HAL_TIM_OnePulse_MspInit; break; case HAL_TIM_ONE_PULSE_MSPDEINIT_CB_ID : - htim->OnePulse_MspDeInitCallback = HAL_TIM_OnePulse_MspDeInit; /* Legacy weak One Pulse Msp DeInit Callback */ + /* Legacy weak One Pulse Msp DeInit Callback */ + htim->OnePulse_MspDeInitCallback = HAL_TIM_OnePulse_MspDeInit; break; case HAL_TIM_ENCODER_MSPINIT_CB_ID : - htim->Encoder_MspInitCallback = HAL_TIM_Encoder_MspInit; /* Legacy weak Encoder Msp Init Callback */ + /* Legacy weak Encoder Msp Init Callback */ + htim->Encoder_MspInitCallback = HAL_TIM_Encoder_MspInit; break; case HAL_TIM_ENCODER_MSPDEINIT_CB_ID : - htim->Encoder_MspDeInitCallback = HAL_TIM_Encoder_MspDeInit; /* Legacy weak Encoder Msp DeInit Callback */ + /* Legacy weak Encoder Msp DeInit Callback */ + htim->Encoder_MspDeInitCallback = HAL_TIM_Encoder_MspDeInit; break; case HAL_TIM_HALL_SENSOR_MSPINIT_CB_ID : - htim->HallSensor_MspInitCallback = HAL_TIMEx_HallSensor_MspInit; /* Legacy weak Hall Sensor Msp Init Callback */ + /* Legacy weak Hall Sensor Msp Init Callback */ + htim->HallSensor_MspInitCallback = HAL_TIMEx_HallSensor_MspInit; break; case HAL_TIM_HALL_SENSOR_MSPDEINIT_CB_ID : - htim->HallSensor_MspDeInitCallback = HAL_TIMEx_HallSensor_MspDeInit; /* Legacy weak Hall Sensor Msp DeInit Callback */ + /* Legacy weak Hall Sensor Msp DeInit Callback */ + htim->HallSensor_MspDeInitCallback = HAL_TIMEx_HallSensor_MspDeInit; break; default : /* Return error status */ - status = HAL_ERROR; + status = HAL_ERROR; break; } } else { /* Return error status */ - status = HAL_ERROR; + status = HAL_ERROR; } /* Release Lock */ @@ -5536,6 +6394,54 @@ HAL_TIM_StateTypeDef HAL_TIM_Encoder_GetState(TIM_HandleTypeDef *htim) return htim->State; } +/** + * @brief Return the TIM Encoder Mode handle state. + * @param htim TIM handle + * @retval Active channel + */ +HAL_TIM_ActiveChannel HAL_TIM_GetActiveChannel(TIM_HandleTypeDef *htim) +{ + return htim->Channel; +} + +/** + * @brief Return actual state of the TIM channel. + * @param htim TIM handle + * @param Channel TIM Channel + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 + * @arg TIM_CHANNEL_2: TIM Channel 2 + * @arg TIM_CHANNEL_3: TIM Channel 3 + * @arg TIM_CHANNEL_4: TIM Channel 4 + * @arg TIM_CHANNEL_5: TIM Channel 5 + * @arg TIM_CHANNEL_6: TIM Channel 6 + * @retval TIM Channel state + */ +HAL_TIM_ChannelStateTypeDef HAL_TIM_GetChannelState(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + HAL_TIM_ChannelStateTypeDef channel_state; + + /* Check the parameters */ + assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); + + channel_state = TIM_CHANNEL_STATE_GET(htim, Channel); + + return channel_state; +} + +/** + * @brief Return actual state of a DMA burst operation. + * @param htim TIM handle + * @retval DMA burst state + */ +HAL_TIM_DMABurstStateTypeDef HAL_TIM_DMABurstState(TIM_HandleTypeDef *htim) +{ + /* Check the parameters */ + assert_param(IS_TIM_DMABURST_INSTANCE(htim->Instance)); + + return htim->DMABurstState; +} + /** * @} */ @@ -5557,13 +6463,38 @@ void TIM_DMAError(DMA_HandleTypeDef *hdma) { TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; - htim->State = HAL_TIM_STATE_READY; + if (hdma == htim->hdma[TIM_DMA_ID_CC1]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_1; + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC2]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_2; + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC3]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_3; + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_3, HAL_TIM_CHANNEL_STATE_READY); + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC4]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_4; + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_4, HAL_TIM_CHANNEL_STATE_READY); + } + else + { + htim->State = HAL_TIM_STATE_READY; + } #if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) htim->ErrorCallback(htim); #else HAL_TIM_ErrorCallback(htim); #endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED; } /** @@ -5571,27 +6502,45 @@ void TIM_DMAError(DMA_HandleTypeDef *hdma) * @param hdma pointer to DMA handle. * @retval None */ -void TIM_DMADelayPulseCplt(DMA_HandleTypeDef *hdma) +static void TIM_DMADelayPulseCplt(DMA_HandleTypeDef *hdma) { TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; - htim->State = HAL_TIM_STATE_READY; - if (hdma == htim->hdma[TIM_DMA_ID_CC1]) { htim->Channel = HAL_TIM_ACTIVE_CHANNEL_1; + + if (hdma->Init.Mode == DMA_NORMAL) + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + } } else if (hdma == htim->hdma[TIM_DMA_ID_CC2]) { htim->Channel = HAL_TIM_ACTIVE_CHANNEL_2; + + if (hdma->Init.Mode == DMA_NORMAL) + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + } } else if (hdma == htim->hdma[TIM_DMA_ID_CC3]) { htim->Channel = HAL_TIM_ACTIVE_CHANNEL_3; + + if (hdma->Init.Mode == DMA_NORMAL) + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_3, HAL_TIM_CHANNEL_STATE_READY); + } } else if (hdma == htim->hdma[TIM_DMA_ID_CC4]) { htim->Channel = HAL_TIM_ACTIVE_CHANNEL_4; + + if (hdma->Init.Mode == DMA_NORMAL) + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_4, HAL_TIM_CHANNEL_STATE_READY); + } } else { @@ -5616,8 +6565,6 @@ void TIM_DMADelayPulseHalfCplt(DMA_HandleTypeDef *hdma) { TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; - htim->State = HAL_TIM_STATE_READY; - if (hdma == htim->hdma[TIM_DMA_ID_CC1]) { htim->Channel = HAL_TIM_ACTIVE_CHANNEL_1; @@ -5657,23 +6604,45 @@ void TIM_DMACaptureCplt(DMA_HandleTypeDef *hdma) { TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; - htim->State = HAL_TIM_STATE_READY; - if (hdma == htim->hdma[TIM_DMA_ID_CC1]) { htim->Channel = HAL_TIM_ACTIVE_CHANNEL_1; + + if (hdma->Init.Mode == DMA_NORMAL) + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + } } else if (hdma == htim->hdma[TIM_DMA_ID_CC2]) { htim->Channel = HAL_TIM_ACTIVE_CHANNEL_2; + + if (hdma->Init.Mode == DMA_NORMAL) + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + } } else if (hdma == htim->hdma[TIM_DMA_ID_CC3]) { htim->Channel = HAL_TIM_ACTIVE_CHANNEL_3; + + if (hdma->Init.Mode == DMA_NORMAL) + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_3, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_3, HAL_TIM_CHANNEL_STATE_READY); + } } else if (hdma == htim->hdma[TIM_DMA_ID_CC4]) { htim->Channel = HAL_TIM_ACTIVE_CHANNEL_4; + + if (hdma->Init.Mode == DMA_NORMAL) + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_4, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_4, HAL_TIM_CHANNEL_STATE_READY); + } } else { @@ -5698,8 +6667,6 @@ void TIM_DMACaptureHalfCplt(DMA_HandleTypeDef *hdma) { TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; - htim->State = HAL_TIM_STATE_READY; - if (hdma == htim->hdma[TIM_DMA_ID_CC1]) { htim->Channel = HAL_TIM_ACTIVE_CHANNEL_1; @@ -5739,7 +6706,10 @@ static void TIM_DMAPeriodElapsedCplt(DMA_HandleTypeDef *hdma) { TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; - htim->State = HAL_TIM_STATE_READY; + if (htim->hdma[TIM_DMA_ID_UPDATE]->Init.Mode == DMA_NORMAL) + { + htim->State = HAL_TIM_STATE_READY; + } #if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) htim->PeriodElapsedCallback(htim); @@ -5757,8 +6727,6 @@ static void TIM_DMAPeriodElapsedHalfCplt(DMA_HandleTypeDef *hdma) { TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; - htim->State = HAL_TIM_STATE_READY; - #if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) htim->PeriodElapsedHalfCpltCallback(htim); #else @@ -5775,7 +6743,10 @@ static void TIM_DMATriggerCplt(DMA_HandleTypeDef *hdma) { TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; - htim->State = HAL_TIM_STATE_READY; + if (htim->hdma[TIM_DMA_ID_TRIGGER]->Init.Mode == DMA_NORMAL) + { + htim->State = HAL_TIM_STATE_READY; + } #if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) htim->TriggerCallback(htim); @@ -5793,8 +6764,6 @@ static void TIM_DMATriggerHalfCplt(DMA_HandleTypeDef *hdma) { TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; - htim->State = HAL_TIM_STATE_READY; - #if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) htim->TriggerHalfCpltCallback(htim); #else @@ -5853,7 +6822,7 @@ void TIM_Base_SetConfig(TIM_TypeDef *TIMx, TIM_Base_InitTypeDef *Structure) /** * @brief Timer Output Compare 1 configuration * @param TIMx to select the TIM peripheral - * @param OC_Config The ouput configuration structure + * @param OC_Config The output configuration structure * @retval None */ static void TIM_OC1_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config) @@ -5928,7 +6897,7 @@ static void TIM_OC1_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config) /** * @brief Timer Output Compare 2 configuration * @param TIMx to select the TIM peripheral - * @param OC_Config The ouput configuration structure + * @param OC_Config The output configuration structure * @retval None */ void TIM_OC2_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config) @@ -6004,7 +6973,7 @@ void TIM_OC2_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config) /** * @brief Timer Output Compare 3 configuration * @param TIMx to select the TIM peripheral - * @param OC_Config The ouput configuration structure + * @param OC_Config The output configuration structure * @retval None */ static void TIM_OC3_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config) @@ -6078,7 +7047,7 @@ static void TIM_OC3_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config) /** * @brief Timer Output Compare 4 configuration * @param TIMx to select the TIM peripheral - * @param OC_Config The ouput configuration structure + * @param OC_Config The output configuration structure * @retval None */ static void TIM_OC4_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config) @@ -6144,6 +7113,7 @@ static void TIM_OC4_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config) static HAL_StatusTypeDef TIM_SlaveTimer_SetConfig(TIM_HandleTypeDef *htim, TIM_SlaveConfigTypeDef *sSlaveConfig) { + HAL_StatusTypeDef status = HAL_OK; uint32_t tmpsmcr; uint32_t tmpccmr1; uint32_t tmpccer; @@ -6188,7 +7158,7 @@ static HAL_StatusTypeDef TIM_SlaveTimer_SetConfig(TIM_HandleTypeDef *htim, assert_param(IS_TIM_CC1_INSTANCE(htim->Instance)); assert_param(IS_TIM_TRIGGERFILTER(sSlaveConfig->TriggerFilter)); - if(sSlaveConfig->SlaveMode == TIM_SLAVEMODE_GATED) + if (sSlaveConfig->SlaveMode == TIM_SLAVEMODE_GATED) { return HAL_ERROR; } @@ -6247,9 +7217,11 @@ static HAL_StatusTypeDef TIM_SlaveTimer_SetConfig(TIM_HandleTypeDef *htim, } default: + status = HAL_ERROR; break; } - return HAL_OK; + + return status; } /** @@ -6623,19 +7595,19 @@ void TIM_CCxChannelCmd(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t ChannelStat void TIM_ResetCallback(TIM_HandleTypeDef *htim) { /* Reset the TIM callback to the legacy weak callbacks */ - htim->PeriodElapsedCallback = HAL_TIM_PeriodElapsedCallback; /* Legacy weak PeriodElapsedCallback */ - htim->PeriodElapsedHalfCpltCallback = HAL_TIM_PeriodElapsedHalfCpltCallback; /* Legacy weak PeriodElapsedHalfCpltCallback */ - htim->TriggerCallback = HAL_TIM_TriggerCallback; /* Legacy weak TriggerCallback */ - htim->TriggerHalfCpltCallback = HAL_TIM_TriggerHalfCpltCallback; /* Legacy weak TriggerHalfCpltCallback */ - htim->IC_CaptureCallback = HAL_TIM_IC_CaptureCallback; /* Legacy weak IC_CaptureCallback */ - htim->IC_CaptureHalfCpltCallback = HAL_TIM_IC_CaptureHalfCpltCallback; /* Legacy weak IC_CaptureHalfCpltCallback */ - htim->OC_DelayElapsedCallback = HAL_TIM_OC_DelayElapsedCallback; /* Legacy weak OC_DelayElapsedCallback */ - htim->PWM_PulseFinishedCallback = HAL_TIM_PWM_PulseFinishedCallback; /* Legacy weak PWM_PulseFinishedCallback */ - htim->PWM_PulseFinishedHalfCpltCallback = HAL_TIM_PWM_PulseFinishedHalfCpltCallback; /* Legacy weak PWM_PulseFinishedHalfCpltCallback */ - htim->ErrorCallback = HAL_TIM_ErrorCallback; /* Legacy weak ErrorCallback */ - htim->CommutationCallback = HAL_TIMEx_CommutCallback; /* Legacy weak CommutationCallback */ - htim->CommutationHalfCpltCallback = HAL_TIMEx_CommutHalfCpltCallback; /* Legacy weak CommutationHalfCpltCallback */ - htim->BreakCallback = HAL_TIMEx_BreakCallback; /* Legacy weak BreakCallback */ + htim->PeriodElapsedCallback = HAL_TIM_PeriodElapsedCallback; + htim->PeriodElapsedHalfCpltCallback = HAL_TIM_PeriodElapsedHalfCpltCallback; + htim->TriggerCallback = HAL_TIM_TriggerCallback; + htim->TriggerHalfCpltCallback = HAL_TIM_TriggerHalfCpltCallback; + htim->IC_CaptureCallback = HAL_TIM_IC_CaptureCallback; + htim->IC_CaptureHalfCpltCallback = HAL_TIM_IC_CaptureHalfCpltCallback; + htim->OC_DelayElapsedCallback = HAL_TIM_OC_DelayElapsedCallback; + htim->PWM_PulseFinishedCallback = HAL_TIM_PWM_PulseFinishedCallback; + htim->PWM_PulseFinishedHalfCpltCallback = HAL_TIM_PWM_PulseFinishedHalfCpltCallback; + htim->ErrorCallback = HAL_TIM_ErrorCallback; + htim->CommutationCallback = HAL_TIMEx_CommutCallback; + htim->CommutationHalfCpltCallback = HAL_TIMEx_CommutHalfCpltCallback; + htim->BreakCallback = HAL_TIMEx_BreakCallback; } #endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ diff --git a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_tim_ex.c b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_tim_ex.c index 7988a78..ae1c0e3 100644 --- a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_tim_ex.c +++ b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_tim_ex.c @@ -54,10 +54,13 @@ the commutation event). (#) Activate the TIM peripheral using one of the start functions: - (++) Complementary Output Compare : HAL_TIMEx_OCN_Start(), HAL_TIMEx_OCN_Start_DMA(), HAL_TIMEx_OC_Start_IT() - (++) Complementary PWM generation : HAL_TIMEx_PWMN_Start(), HAL_TIMEx_PWMN_Start_DMA(), HAL_TIMEx_PWMN_Start_IT() + (++) Complementary Output Compare : HAL_TIMEx_OCN_Start(), HAL_TIMEx_OCN_Start_DMA(), + HAL_TIMEx_OCN_Start_IT() + (++) Complementary PWM generation : HAL_TIMEx_PWMN_Start(), HAL_TIMEx_PWMN_Start_DMA(), + HAL_TIMEx_PWMN_Start_IT() (++) Complementary One-pulse mode output : HAL_TIMEx_OnePulseN_Start(), HAL_TIMEx_OnePulseN_Start_IT() - (++) Hall Sensor output : HAL_TIMEx_HallSensor_Start(), HAL_TIMEx_HallSensor_Start_DMA(), HAL_TIMEx_HallSensor_Start_IT(). + (++) Hall Sensor output : HAL_TIMEx_HallSensor_Start(), HAL_TIMEx_HallSensor_Start_DMA(), + HAL_TIMEx_HallSensor_Start_IT(). @endverbatim ****************************************************************************** @@ -90,9 +93,11 @@ /* Private typedef -----------------------------------------------------------*/ /* Private define ------------------------------------------------------------*/ -/* Private macro -------------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ /* Private variables ---------------------------------------------------------*/ /* Private function prototypes -----------------------------------------------*/ +static void TIM_DMADelayPulseNCplt(DMA_HandleTypeDef *hdma); +static void TIM_DMAErrorCCxN(DMA_HandleTypeDef *hdma); static void TIM_CCxNChannelCmd(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t ChannelNState); /* Exported functions --------------------------------------------------------*/ @@ -123,6 +128,9 @@ static void TIM_CCxNChannelCmd(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t Cha */ /** * @brief Initializes the TIM Hall Sensor Interface and initialize the associated handle. + * @note When the timer instance is initialized in Hall Sensor Interface mode, + * timer channels 1 and channel 2 are reserved and cannot be used for + * other purpose. * @param htim TIM Hall Sensor Interface handle * @param sConfig TIM Hall Sensor configuration structure * @retval HAL status @@ -208,6 +216,15 @@ HAL_StatusTypeDef HAL_TIMEx_HallSensor_Init(TIM_HandleTypeDef *htim, TIM_HallSen htim->Instance->CR2 &= ~TIM_CR2_MMS; htim->Instance->CR2 |= TIM_TRGO_OC2REF; + /* Initialize the DMA burst operation state */ + htim->DMABurstState = HAL_DMA_BURST_STATE_READY; + + /* Initialize the TIM channels state */ + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + /* Initialize the TIM state*/ htim->State = HAL_TIM_STATE_READY; @@ -241,6 +258,15 @@ HAL_StatusTypeDef HAL_TIMEx_HallSensor_DeInit(TIM_HandleTypeDef *htim) HAL_TIMEx_HallSensor_MspDeInit(htim); #endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + /* Change the DMA burst operation state */ + htim->DMABurstState = HAL_DMA_BURST_STATE_RESET; + + /* Change the TIM channels state */ + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_RESET); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_RESET); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_RESET); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_RESET); + /* Change TIM state */ htim->State = HAL_TIM_STATE_RESET; @@ -288,17 +314,44 @@ __weak void HAL_TIMEx_HallSensor_MspDeInit(TIM_HandleTypeDef *htim) HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start(TIM_HandleTypeDef *htim) { uint32_t tmpsmcr; + HAL_TIM_ChannelStateTypeDef channel_1_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef channel_2_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_2); + HAL_TIM_ChannelStateTypeDef complementary_channel_1_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef complementary_channel_2_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_2); /* Check the parameters */ assert_param(IS_TIM_HALL_SENSOR_INTERFACE_INSTANCE(htim->Instance)); + /* Check the TIM channels state */ + if ((channel_1_state != HAL_TIM_CHANNEL_STATE_READY) + || (channel_2_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_1_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_2_state != HAL_TIM_CHANNEL_STATE_READY)) + { + return HAL_ERROR; + } + + /* Set the TIM channels state */ + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + /* Enable the Input Capture channel 1 - (in the Hall Sensor Interface the three possible channels that can be used are TIM_CHANNEL_1, TIM_CHANNEL_2 and TIM_CHANNEL_3) */ + (in the Hall Sensor Interface the three possible channels that can be used are TIM_CHANNEL_1, + TIM_CHANNEL_2 and TIM_CHANNEL_3) */ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE); /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ - tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; - if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else { __HAL_TIM_ENABLE(htim); } @@ -318,12 +371,19 @@ HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop(TIM_HandleTypeDef *htim) assert_param(IS_TIM_HALL_SENSOR_INTERFACE_INSTANCE(htim->Instance)); /* Disable the Input Capture channels 1, 2 and 3 - (in the Hall Sensor Interface the three possible channels that can be used are TIM_CHANNEL_1, TIM_CHANNEL_2 and TIM_CHANNEL_3) */ + (in the Hall Sensor Interface the three possible channels that can be used are TIM_CHANNEL_1, + TIM_CHANNEL_2 and TIM_CHANNEL_3) */ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE); /* Disable the Peripheral */ __HAL_TIM_DISABLE(htim); + /* Set the TIM channels state */ + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + /* Return function status */ return HAL_OK; } @@ -336,20 +396,47 @@ HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop(TIM_HandleTypeDef *htim) HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start_IT(TIM_HandleTypeDef *htim) { uint32_t tmpsmcr; + HAL_TIM_ChannelStateTypeDef channel_1_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef channel_2_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_2); + HAL_TIM_ChannelStateTypeDef complementary_channel_1_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef complementary_channel_2_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_2); /* Check the parameters */ assert_param(IS_TIM_HALL_SENSOR_INTERFACE_INSTANCE(htim->Instance)); + /* Check the TIM channels state */ + if ((channel_1_state != HAL_TIM_CHANNEL_STATE_READY) + || (channel_2_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_1_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_2_state != HAL_TIM_CHANNEL_STATE_READY)) + { + return HAL_ERROR; + } + + /* Set the TIM channels state */ + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + /* Enable the capture compare Interrupts 1 event */ __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1); /* Enable the Input Capture channel 1 - (in the Hall Sensor Interface the three possible channels that can be used are TIM_CHANNEL_1, TIM_CHANNEL_2 and TIM_CHANNEL_3) */ + (in the Hall Sensor Interface the three possible channels that can be used are TIM_CHANNEL_1, + TIM_CHANNEL_2 and TIM_CHANNEL_3) */ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE); /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ - tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; - if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else { __HAL_TIM_ENABLE(htim); } @@ -369,7 +456,8 @@ HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop_IT(TIM_HandleTypeDef *htim) assert_param(IS_TIM_HALL_SENSOR_INTERFACE_INSTANCE(htim->Instance)); /* Disable the Input Capture channel 1 - (in the Hall Sensor Interface the three possible channels that can be used are TIM_CHANNEL_1, TIM_CHANNEL_2 and TIM_CHANNEL_3) */ + (in the Hall Sensor Interface the three possible channels that can be used are TIM_CHANNEL_1, + TIM_CHANNEL_2 and TIM_CHANNEL_3) */ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE); /* Disable the capture compare Interrupts event */ @@ -378,6 +466,12 @@ HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop_IT(TIM_HandleTypeDef *htim) /* Disable the Peripheral */ __HAL_TIM_DISABLE(htim); + /* Set the TIM channels state */ + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + /* Return function status */ return HAL_OK; } @@ -392,31 +486,39 @@ HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop_IT(TIM_HandleTypeDef *htim) HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start_DMA(TIM_HandleTypeDef *htim, uint32_t *pData, uint16_t Length) { uint32_t tmpsmcr; + HAL_TIM_ChannelStateTypeDef channel_1_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef complementary_channel_1_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_1); /* Check the parameters */ assert_param(IS_TIM_HALL_SENSOR_INTERFACE_INSTANCE(htim->Instance)); - if (htim->State == HAL_TIM_STATE_BUSY) + /* Set the TIM channel state */ + if ((channel_1_state == HAL_TIM_CHANNEL_STATE_BUSY) + || (complementary_channel_1_state == HAL_TIM_CHANNEL_STATE_BUSY)) { return HAL_BUSY; } - else if (htim->State == HAL_TIM_STATE_READY) + else if ((channel_1_state == HAL_TIM_CHANNEL_STATE_READY) + && (complementary_channel_1_state == HAL_TIM_CHANNEL_STATE_READY)) { - if (((uint32_t)pData == 0U) && (Length > 0U)) + if ((pData == NULL) && (Length > 0U)) { return HAL_ERROR; } else { - htim->State = HAL_TIM_STATE_BUSY; + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); } } else { - /* nothing to do */ + return HAL_ERROR; } + /* Enable the Input Capture channel 1 - (in the Hall Sensor Interface the three possible channels that can be used are TIM_CHANNEL_1, TIM_CHANNEL_2 and TIM_CHANNEL_3) */ + (in the Hall Sensor Interface the three possible channels that can be used are TIM_CHANNEL_1, + TIM_CHANNEL_2 and TIM_CHANNEL_3) */ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE); /* Set the DMA Input Capture 1 Callbacks */ @@ -428,14 +530,22 @@ HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start_DMA(TIM_HandleTypeDef *htim, uint32 /* Enable the DMA stream for Capture 1*/ if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)&htim->Instance->CCR1, (uint32_t)pData, Length) != HAL_OK) { + /* Return error status */ return HAL_ERROR; } /* Enable the capture compare 1 Interrupt */ __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1); /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ - tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; - if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else { __HAL_TIM_ENABLE(htim); } @@ -455,7 +565,8 @@ HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop_DMA(TIM_HandleTypeDef *htim) assert_param(IS_TIM_HALL_SENSOR_INTERFACE_INSTANCE(htim->Instance)); /* Disable the Input Capture channel 1 - (in the Hall Sensor Interface the three possible channels that can be used are TIM_CHANNEL_1, TIM_CHANNEL_2 and TIM_CHANNEL_3) */ + (in the Hall Sensor Interface the three possible channels that can be used are TIM_CHANNEL_1, + TIM_CHANNEL_2 and TIM_CHANNEL_3) */ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE); @@ -463,9 +574,14 @@ HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop_DMA(TIM_HandleTypeDef *htim) __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1); (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC1]); + /* Disable the Peripheral */ __HAL_TIM_DISABLE(htim); + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + /* Return function status */ return HAL_OK; } @@ -512,6 +628,15 @@ HAL_StatusTypeDef HAL_TIMEx_OCN_Start(TIM_HandleTypeDef *htim, uint32_t Channel) /* Check the parameters */ assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); + /* Check the TIM complementary channel state */ + if (TIM_CHANNEL_N_STATE_GET(htim, Channel) != HAL_TIM_CHANNEL_STATE_READY) + { + return HAL_ERROR; + } + + /* Set the TIM complementary channel state */ + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + /* Enable the Capture compare channel N */ TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_ENABLE); @@ -519,8 +644,15 @@ HAL_StatusTypeDef HAL_TIMEx_OCN_Start(TIM_HandleTypeDef *htim, uint32_t Channel) __HAL_TIM_MOE_ENABLE(htim); /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ - tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; - if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else { __HAL_TIM_ENABLE(htim); } @@ -554,6 +686,9 @@ HAL_StatusTypeDef HAL_TIMEx_OCN_Stop(TIM_HandleTypeDef *htim, uint32_t Channel) /* Disable the Peripheral */ __HAL_TIM_DISABLE(htim); + /* Set the TIM complementary channel state */ + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + /* Return function status */ return HAL_OK; } @@ -571,11 +706,21 @@ HAL_StatusTypeDef HAL_TIMEx_OCN_Stop(TIM_HandleTypeDef *htim, uint32_t Channel) */ HAL_StatusTypeDef HAL_TIMEx_OCN_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel) { + HAL_StatusTypeDef status = HAL_OK; uint32_t tmpsmcr; /* Check the parameters */ assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); + /* Check the TIM complementary channel state */ + if (TIM_CHANNEL_N_STATE_GET(htim, Channel) != HAL_TIM_CHANNEL_STATE_READY) + { + return HAL_ERROR; + } + + /* Set the TIM complementary channel state */ + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + switch (Channel) { case TIM_CHANNEL_1: @@ -601,27 +746,38 @@ HAL_StatusTypeDef HAL_TIMEx_OCN_Start_IT(TIM_HandleTypeDef *htim, uint32_t Chann default: + status = HAL_ERROR; break; } - /* Enable the TIM Break interrupt */ - __HAL_TIM_ENABLE_IT(htim, TIM_IT_BREAK); - - /* Enable the Capture compare channel N */ - TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_ENABLE); - - /* Enable the Main Output */ - __HAL_TIM_MOE_ENABLE(htim); - - /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ - tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; - if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + if (status == HAL_OK) { - __HAL_TIM_ENABLE(htim); + /* Enable the TIM Break interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_BREAK); + + /* Enable the Capture compare channel N */ + TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_ENABLE); + + /* Enable the Main Output */ + __HAL_TIM_MOE_ENABLE(htim); + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } } /* Return function status */ - return HAL_OK; + return status; } /** @@ -637,7 +793,9 @@ HAL_StatusTypeDef HAL_TIMEx_OCN_Start_IT(TIM_HandleTypeDef *htim, uint32_t Chann */ HAL_StatusTypeDef HAL_TIMEx_OCN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel) { + HAL_StatusTypeDef status = HAL_OK; uint32_t tmpccer; + /* Check the parameters */ assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); @@ -665,27 +823,34 @@ HAL_StatusTypeDef HAL_TIMEx_OCN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channe } default: + status = HAL_ERROR; break; } - /* Disable the Capture compare channel N */ - TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_DISABLE); - - /* Disable the TIM Break interrupt (only if no more channel is active) */ - tmpccer = htim->Instance->CCER; - if ((tmpccer & (TIM_CCER_CC1NE | TIM_CCER_CC2NE | TIM_CCER_CC3NE)) == (uint32_t)RESET) + if (status == HAL_OK) { - __HAL_TIM_DISABLE_IT(htim, TIM_IT_BREAK); + /* Disable the Capture compare channel N */ + TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_DISABLE); + + /* Disable the TIM Break interrupt (only if no more channel is active) */ + tmpccer = htim->Instance->CCER; + if ((tmpccer & (TIM_CCER_CC1NE | TIM_CCER_CC2NE | TIM_CCER_CC3NE)) == (uint32_t)RESET) + { + __HAL_TIM_DISABLE_IT(htim, TIM_IT_BREAK); + } + + /* Disable the Main Output */ + __HAL_TIM_MOE_DISABLE(htim); + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM complementary channel state */ + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); } - /* Disable the Main Output */ - __HAL_TIM_MOE_DISABLE(htim); - - /* Disable the Peripheral */ - __HAL_TIM_DISABLE(htim); - /* Return function status */ - return HAL_OK; + return status; } /** @@ -703,29 +868,31 @@ HAL_StatusTypeDef HAL_TIMEx_OCN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channe */ HAL_StatusTypeDef HAL_TIMEx_OCN_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length) { + HAL_StatusTypeDef status = HAL_OK; uint32_t tmpsmcr; /* Check the parameters */ assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); - if (htim->State == HAL_TIM_STATE_BUSY) + /* Set the TIM complementary channel state */ + if (TIM_CHANNEL_N_STATE_GET(htim, Channel) == HAL_TIM_CHANNEL_STATE_BUSY) { return HAL_BUSY; } - else if (htim->State == HAL_TIM_STATE_READY) + else if (TIM_CHANNEL_N_STATE_GET(htim, Channel) == HAL_TIM_CHANNEL_STATE_READY) { - if (((uint32_t)pData == 0U) && (Length > 0U)) + if ((pData == NULL) && (Length > 0U)) { return HAL_ERROR; } else { - htim->State = HAL_TIM_STATE_BUSY; + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); } } else { - /* nothing to do */ + return HAL_ERROR; } switch (Channel) @@ -733,15 +900,17 @@ HAL_StatusTypeDef HAL_TIMEx_OCN_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Chan case TIM_CHANNEL_1: { /* Set the DMA compare callbacks */ - htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMADelayPulseCplt; + htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMADelayPulseNCplt; htim->hdma[TIM_DMA_ID_CC1]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; /* Set the DMA error callback */ - htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ; + htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAErrorCCxN ; /* Enable the DMA stream */ - if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)pData, (uint32_t)&htim->Instance->CCR1, Length) != HAL_OK) + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)pData, (uint32_t)&htim->Instance->CCR1, + Length) != HAL_OK) { + /* Return error status */ return HAL_ERROR; } /* Enable the TIM Output Compare DMA request */ @@ -752,15 +921,17 @@ HAL_StatusTypeDef HAL_TIMEx_OCN_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Chan case TIM_CHANNEL_2: { /* Set the DMA compare callbacks */ - htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMADelayPulseCplt; + htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMADelayPulseNCplt; htim->hdma[TIM_DMA_ID_CC2]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; /* Set the DMA error callback */ - htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError ; + htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAErrorCCxN ; /* Enable the DMA stream */ - if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)pData, (uint32_t)&htim->Instance->CCR2, Length) != HAL_OK) + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)pData, (uint32_t)&htim->Instance->CCR2, + Length) != HAL_OK) { + /* Return error status */ return HAL_ERROR; } /* Enable the TIM Output Compare DMA request */ @@ -771,15 +942,17 @@ HAL_StatusTypeDef HAL_TIMEx_OCN_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Chan case TIM_CHANNEL_3: { /* Set the DMA compare callbacks */ - htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback = TIM_DMADelayPulseCplt; + htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback = TIM_DMADelayPulseNCplt; htim->hdma[TIM_DMA_ID_CC3]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; /* Set the DMA error callback */ - htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = TIM_DMAError ; + htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = TIM_DMAErrorCCxN ; /* Enable the DMA stream */ - if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)pData, (uint32_t)&htim->Instance->CCR3, Length) != HAL_OK) + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)pData, (uint32_t)&htim->Instance->CCR3, + Length) != HAL_OK) { + /* Return error status */ return HAL_ERROR; } /* Enable the TIM Output Compare DMA request */ @@ -788,24 +961,35 @@ HAL_StatusTypeDef HAL_TIMEx_OCN_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Chan } default: + status = HAL_ERROR; break; } - /* Enable the Capture compare channel N */ - TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_ENABLE); - - /* Enable the Main Output */ - __HAL_TIM_MOE_ENABLE(htim); - - /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ - tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; - if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + if (status == HAL_OK) { - __HAL_TIM_ENABLE(htim); + /* Enable the Capture compare channel N */ + TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_ENABLE); + + /* Enable the Main Output */ + __HAL_TIM_MOE_ENABLE(htim); + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } } /* Return function status */ - return HAL_OK; + return status; } /** @@ -821,6 +1005,8 @@ HAL_StatusTypeDef HAL_TIMEx_OCN_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Chan */ HAL_StatusTypeDef HAL_TIMEx_OCN_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel) { + HAL_StatusTypeDef status = HAL_OK; + /* Check the parameters */ assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); @@ -851,23 +1037,27 @@ HAL_StatusTypeDef HAL_TIMEx_OCN_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Chann } default: + status = HAL_ERROR; break; } - /* Disable the Capture compare channel N */ - TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_DISABLE); + if (status == HAL_OK) + { + /* Disable the Capture compare channel N */ + TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_DISABLE); - /* Disable the Main Output */ - __HAL_TIM_MOE_DISABLE(htim); + /* Disable the Main Output */ + __HAL_TIM_MOE_DISABLE(htim); - /* Disable the Peripheral */ - __HAL_TIM_DISABLE(htim); + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); - /* Change the htim state */ - htim->State = HAL_TIM_STATE_READY; + /* Set the TIM complementary channel state */ + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + } /* Return function status */ - return HAL_OK; + return status; } /** @@ -921,6 +1111,15 @@ HAL_StatusTypeDef HAL_TIMEx_PWMN_Start(TIM_HandleTypeDef *htim, uint32_t Channel /* Check the parameters */ assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); + /* Check the TIM complementary channel state */ + if (TIM_CHANNEL_N_STATE_GET(htim, Channel) != HAL_TIM_CHANNEL_STATE_READY) + { + return HAL_ERROR; + } + + /* Set the TIM complementary channel state */ + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + /* Enable the complementary PWM output */ TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_ENABLE); @@ -928,8 +1127,15 @@ HAL_StatusTypeDef HAL_TIMEx_PWMN_Start(TIM_HandleTypeDef *htim, uint32_t Channel __HAL_TIM_MOE_ENABLE(htim); /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ - tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; - if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else { __HAL_TIM_ENABLE(htim); } @@ -962,6 +1168,9 @@ HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop(TIM_HandleTypeDef *htim, uint32_t Channel) /* Disable the Peripheral */ __HAL_TIM_DISABLE(htim); + /* Set the TIM complementary channel state */ + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + /* Return function status */ return HAL_OK; } @@ -979,11 +1188,21 @@ HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop(TIM_HandleTypeDef *htim, uint32_t Channel) */ HAL_StatusTypeDef HAL_TIMEx_PWMN_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel) { + HAL_StatusTypeDef status = HAL_OK; uint32_t tmpsmcr; /* Check the parameters */ assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); + /* Check the TIM complementary channel state */ + if (TIM_CHANNEL_N_STATE_GET(htim, Channel) != HAL_TIM_CHANNEL_STATE_READY) + { + return HAL_ERROR; + } + + /* Set the TIM complementary channel state */ + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + switch (Channel) { case TIM_CHANNEL_1: @@ -1008,27 +1227,38 @@ HAL_StatusTypeDef HAL_TIMEx_PWMN_Start_IT(TIM_HandleTypeDef *htim, uint32_t Chan } default: + status = HAL_ERROR; break; } - /* Enable the TIM Break interrupt */ - __HAL_TIM_ENABLE_IT(htim, TIM_IT_BREAK); - - /* Enable the complementary PWM output */ - TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_ENABLE); - - /* Enable the Main Output */ - __HAL_TIM_MOE_ENABLE(htim); - - /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ - tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; - if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + if (status == HAL_OK) { - __HAL_TIM_ENABLE(htim); + /* Enable the TIM Break interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_BREAK); + + /* Enable the complementary PWM output */ + TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_ENABLE); + + /* Enable the Main Output */ + __HAL_TIM_MOE_ENABLE(htim); + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } } /* Return function status */ - return HAL_OK; + return status; } /** @@ -1044,6 +1274,7 @@ HAL_StatusTypeDef HAL_TIMEx_PWMN_Start_IT(TIM_HandleTypeDef *htim, uint32_t Chan */ HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel) { + HAL_StatusTypeDef status = HAL_OK; uint32_t tmpccer; /* Check the parameters */ @@ -1073,27 +1304,34 @@ HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Chann } default: + status = HAL_ERROR; break; } - /* Disable the complementary PWM output */ - TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_DISABLE); - - /* Disable the TIM Break interrupt (only if no more channel is active) */ - tmpccer = htim->Instance->CCER; - if ((tmpccer & (TIM_CCER_CC1NE | TIM_CCER_CC2NE | TIM_CCER_CC3NE)) == (uint32_t)RESET) + if (status == HAL_OK) { - __HAL_TIM_DISABLE_IT(htim, TIM_IT_BREAK); + /* Disable the complementary PWM output */ + TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_DISABLE); + + /* Disable the TIM Break interrupt (only if no more channel is active) */ + tmpccer = htim->Instance->CCER; + if ((tmpccer & (TIM_CCER_CC1NE | TIM_CCER_CC2NE | TIM_CCER_CC3NE)) == (uint32_t)RESET) + { + __HAL_TIM_DISABLE_IT(htim, TIM_IT_BREAK); + } + + /* Disable the Main Output */ + __HAL_TIM_MOE_DISABLE(htim); + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM complementary channel state */ + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); } - /* Disable the Main Output */ - __HAL_TIM_MOE_DISABLE(htim); - - /* Disable the Peripheral */ - __HAL_TIM_DISABLE(htim); - /* Return function status */ - return HAL_OK; + return status; } /** @@ -1111,44 +1349,49 @@ HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Chann */ HAL_StatusTypeDef HAL_TIMEx_PWMN_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length) { + HAL_StatusTypeDef status = HAL_OK; uint32_t tmpsmcr; /* Check the parameters */ assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); - if (htim->State == HAL_TIM_STATE_BUSY) + /* Set the TIM complementary channel state */ + if (TIM_CHANNEL_N_STATE_GET(htim, Channel) == HAL_TIM_CHANNEL_STATE_BUSY) { return HAL_BUSY; } - else if (htim->State == HAL_TIM_STATE_READY) + else if (TIM_CHANNEL_N_STATE_GET(htim, Channel) == HAL_TIM_CHANNEL_STATE_READY) { - if (((uint32_t)pData == 0U) && (Length > 0U)) + if ((pData == NULL) && (Length > 0U)) { return HAL_ERROR; } else { - htim->State = HAL_TIM_STATE_BUSY; + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); } } else { - /* nothing to do */ + return HAL_ERROR; } + switch (Channel) { case TIM_CHANNEL_1: { /* Set the DMA compare callbacks */ - htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMADelayPulseCplt; + htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMADelayPulseNCplt; htim->hdma[TIM_DMA_ID_CC1]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; /* Set the DMA error callback */ - htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ; + htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAErrorCCxN ; /* Enable the DMA stream */ - if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)pData, (uint32_t)&htim->Instance->CCR1, Length) != HAL_OK) + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)pData, (uint32_t)&htim->Instance->CCR1, + Length) != HAL_OK) { + /* Return error status */ return HAL_ERROR; } /* Enable the TIM Capture/Compare 1 DMA request */ @@ -1159,15 +1402,17 @@ HAL_StatusTypeDef HAL_TIMEx_PWMN_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Cha case TIM_CHANNEL_2: { /* Set the DMA compare callbacks */ - htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMADelayPulseCplt; + htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMADelayPulseNCplt; htim->hdma[TIM_DMA_ID_CC2]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; /* Set the DMA error callback */ - htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError ; + htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAErrorCCxN ; /* Enable the DMA stream */ - if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)pData, (uint32_t)&htim->Instance->CCR2, Length) != HAL_OK) + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)pData, (uint32_t)&htim->Instance->CCR2, + Length) != HAL_OK) { + /* Return error status */ return HAL_ERROR; } /* Enable the TIM Capture/Compare 2 DMA request */ @@ -1178,15 +1423,17 @@ HAL_StatusTypeDef HAL_TIMEx_PWMN_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Cha case TIM_CHANNEL_3: { /* Set the DMA compare callbacks */ - htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback = TIM_DMADelayPulseCplt; + htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback = TIM_DMADelayPulseNCplt; htim->hdma[TIM_DMA_ID_CC3]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; /* Set the DMA error callback */ - htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = TIM_DMAError ; + htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = TIM_DMAErrorCCxN ; /* Enable the DMA stream */ - if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)pData, (uint32_t)&htim->Instance->CCR3, Length) != HAL_OK) + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)pData, (uint32_t)&htim->Instance->CCR3, + Length) != HAL_OK) { + /* Return error status */ return HAL_ERROR; } /* Enable the TIM Capture/Compare 3 DMA request */ @@ -1195,24 +1442,35 @@ HAL_StatusTypeDef HAL_TIMEx_PWMN_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Cha } default: + status = HAL_ERROR; break; } - /* Enable the complementary PWM output */ - TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_ENABLE); - - /* Enable the Main Output */ - __HAL_TIM_MOE_ENABLE(htim); - - /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ - tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; - if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + if (status == HAL_OK) { - __HAL_TIM_ENABLE(htim); + /* Enable the complementary PWM output */ + TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_ENABLE); + + /* Enable the Main Output */ + __HAL_TIM_MOE_ENABLE(htim); + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } } /* Return function status */ - return HAL_OK; + return status; } /** @@ -1228,6 +1486,8 @@ HAL_StatusTypeDef HAL_TIMEx_PWMN_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Cha */ HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel) { + HAL_StatusTypeDef status = HAL_OK; + /* Check the parameters */ assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); @@ -1258,23 +1518,27 @@ HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Chan } default: + status = HAL_ERROR; break; } - /* Disable the complementary PWM output */ - TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_DISABLE); + if (status == HAL_OK) + { + /* Disable the complementary PWM output */ + TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_DISABLE); - /* Disable the Main Output */ - __HAL_TIM_MOE_DISABLE(htim); + /* Disable the Main Output */ + __HAL_TIM_MOE_DISABLE(htim); - /* Disable the Peripheral */ - __HAL_TIM_DISABLE(htim); + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); - /* Change the htim state */ - htim->State = HAL_TIM_STATE_READY; + /* Set the TIM complementary channel state */ + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + } /* Return function status */ - return HAL_OK; + return status; } /** @@ -1302,8 +1566,10 @@ HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Chan /** * @brief Starts the TIM One Pulse signal generation on the complementary * output. + * @note OutputChannel must match the pulse output channel chosen when calling + * @ref HAL_TIM_OnePulse_ConfigChannel(). * @param htim TIM One Pulse handle - * @param OutputChannel TIM Channel to be enabled + * @param OutputChannel pulse output channel to enable * This parameter can be one of the following values: * @arg TIM_CHANNEL_1: TIM Channel 1 selected * @arg TIM_CHANNEL_2: TIM Channel 2 selected @@ -1311,11 +1577,33 @@ HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Chan */ HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Start(TIM_HandleTypeDef *htim, uint32_t OutputChannel) { + uint32_t input_channel = (OutputChannel == TIM_CHANNEL_1) ? TIM_CHANNEL_2 : TIM_CHANNEL_1; + HAL_TIM_ChannelStateTypeDef channel_1_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef channel_2_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_2); + HAL_TIM_ChannelStateTypeDef complementary_channel_1_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef complementary_channel_2_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_2); + /* Check the parameters */ assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, OutputChannel)); - /* Enable the complementary One Pulse output */ + /* Check the TIM channels state */ + if ((channel_1_state != HAL_TIM_CHANNEL_STATE_READY) + || (channel_2_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_1_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_2_state != HAL_TIM_CHANNEL_STATE_READY)) + { + return HAL_ERROR; + } + + /* Set the TIM channels state */ + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + + /* Enable the complementary One Pulse output channel and the Input Capture channel */ TIM_CCxNChannelCmd(htim->Instance, OutputChannel, TIM_CCxN_ENABLE); + TIM_CCxChannelCmd(htim->Instance, input_channel, TIM_CCx_ENABLE); /* Enable the Main Output */ __HAL_TIM_MOE_ENABLE(htim); @@ -1327,8 +1615,10 @@ HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Start(TIM_HandleTypeDef *htim, uint32_t Ou /** * @brief Stops the TIM One Pulse signal generation on the complementary * output. + * @note OutputChannel must match the pulse output channel chosen when calling + * @ref HAL_TIM_OnePulse_ConfigChannel(). * @param htim TIM One Pulse handle - * @param OutputChannel TIM Channel to be disabled + * @param OutputChannel pulse output channel to disable * This parameter can be one of the following values: * @arg TIM_CHANNEL_1: TIM Channel 1 selected * @arg TIM_CHANNEL_2: TIM Channel 2 selected @@ -1336,12 +1626,14 @@ HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Start(TIM_HandleTypeDef *htim, uint32_t Ou */ HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Stop(TIM_HandleTypeDef *htim, uint32_t OutputChannel) { + uint32_t input_channel = (OutputChannel == TIM_CHANNEL_1) ? TIM_CHANNEL_2 : TIM_CHANNEL_1; /* Check the parameters */ assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, OutputChannel)); - /* Disable the complementary One Pulse output */ + /* Disable the complementary One Pulse output channel and the Input Capture channel */ TIM_CCxNChannelCmd(htim->Instance, OutputChannel, TIM_CCxN_DISABLE); + TIM_CCxChannelCmd(htim->Instance, input_channel, TIM_CCx_DISABLE); /* Disable the Main Output */ __HAL_TIM_MOE_DISABLE(htim); @@ -1349,6 +1641,12 @@ HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Stop(TIM_HandleTypeDef *htim, uint32_t Out /* Disable the Peripheral */ __HAL_TIM_DISABLE(htim); + /* Set the TIM channels state */ + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + /* Return function status */ return HAL_OK; } @@ -1356,8 +1654,10 @@ HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Stop(TIM_HandleTypeDef *htim, uint32_t Out /** * @brief Starts the TIM One Pulse signal generation in interrupt mode on the * complementary channel. + * @note OutputChannel must match the pulse output channel chosen when calling + * @ref HAL_TIM_OnePulse_ConfigChannel(). * @param htim TIM One Pulse handle - * @param OutputChannel TIM Channel to be enabled + * @param OutputChannel pulse output channel to enable * This parameter can be one of the following values: * @arg TIM_CHANNEL_1: TIM Channel 1 selected * @arg TIM_CHANNEL_2: TIM Channel 2 selected @@ -1365,17 +1665,39 @@ HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Stop(TIM_HandleTypeDef *htim, uint32_t Out */ HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Start_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel) { + uint32_t input_channel = (OutputChannel == TIM_CHANNEL_1) ? TIM_CHANNEL_2 : TIM_CHANNEL_1; + HAL_TIM_ChannelStateTypeDef channel_1_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef channel_2_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_2); + HAL_TIM_ChannelStateTypeDef complementary_channel_1_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef complementary_channel_2_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_2); + /* Check the parameters */ assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, OutputChannel)); + /* Check the TIM channels state */ + if ((channel_1_state != HAL_TIM_CHANNEL_STATE_READY) + || (channel_2_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_1_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_2_state != HAL_TIM_CHANNEL_STATE_READY)) + { + return HAL_ERROR; + } + + /* Set the TIM channels state */ + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + /* Enable the TIM Capture/Compare 1 interrupt */ __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1); /* Enable the TIM Capture/Compare 2 interrupt */ __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2); - /* Enable the complementary One Pulse output */ + /* Enable the complementary One Pulse output channel and the Input Capture channel */ TIM_CCxNChannelCmd(htim->Instance, OutputChannel, TIM_CCxN_ENABLE); + TIM_CCxChannelCmd(htim->Instance, input_channel, TIM_CCx_ENABLE); /* Enable the Main Output */ __HAL_TIM_MOE_ENABLE(htim); @@ -1387,8 +1709,10 @@ HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Start_IT(TIM_HandleTypeDef *htim, uint32_t /** * @brief Stops the TIM One Pulse signal generation in interrupt mode on the * complementary channel. + * @note OutputChannel must match the pulse output channel chosen when calling + * @ref HAL_TIM_OnePulse_ConfigChannel(). * @param htim TIM One Pulse handle - * @param OutputChannel TIM Channel to be disabled + * @param OutputChannel pulse output channel to disable * This parameter can be one of the following values: * @arg TIM_CHANNEL_1: TIM Channel 1 selected * @arg TIM_CHANNEL_2: TIM Channel 2 selected @@ -1396,6 +1720,8 @@ HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Start_IT(TIM_HandleTypeDef *htim, uint32_t */ HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel) { + uint32_t input_channel = (OutputChannel == TIM_CHANNEL_1) ? TIM_CHANNEL_2 : TIM_CHANNEL_1; + /* Check the parameters */ assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, OutputChannel)); @@ -1405,8 +1731,9 @@ HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t /* Disable the TIM Capture/Compare 2 interrupt */ __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2); - /* Disable the complementary One Pulse output */ + /* Disable the complementary One Pulse output channel and the Input Capture channel */ TIM_CCxNChannelCmd(htim->Instance, OutputChannel, TIM_CCxN_DISABLE); + TIM_CCxChannelCmd(htim->Instance, input_channel, TIM_CCx_DISABLE); /* Disable the Main Output */ __HAL_TIM_MOE_DISABLE(htim); @@ -1414,6 +1741,12 @@ HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t /* Disable the Peripheral */ __HAL_TIM_DISABLE(htim); + /* Set the TIM channels state */ + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + /* Return function status */ return HAL_OK; } @@ -1770,7 +2103,7 @@ HAL_StatusTypeDef HAL_TIMEx_RemapConfig(TIM_HandleTypeDef *htim, uint32_t Remap) /* Check parameters */ assert_param(IS_TIM_REMAP(htim->Instance, Remap)); -#if defined(LPTIM_OR_TIM1_ITR2_RMP) && defined(LPTIM_OR_TIM5_ITR1_RMP) && defined(LPTIM_OR_TIM5_ITR1_RMP) +#if defined(LPTIM_OR_TIM1_ITR2_RMP) && defined(LPTIM_OR_TIM5_ITR1_RMP) && defined(LPTIM_OR_TIM9_ITR1_RMP) if ((Remap & LPTIM_REMAP_MASK) == LPTIM_REMAP_MASK) { /* Connect TIMx internal trigger to LPTIM1 output */ @@ -1787,7 +2120,7 @@ HAL_StatusTypeDef HAL_TIMEx_RemapConfig(TIM_HandleTypeDef *htim, uint32_t Remap) #else /* Set the Timer remapping configuration */ WRITE_REG(htim->Instance->OR, Remap); -#endif /* LPTIM_OR_TIM1_ITR2_RMP && LPTIM_OR_TIM5_ITR1_RMP && LPTIM_OR_TIM5_ITR1_RMP */ +#endif /* LPTIM_OR_TIM1_ITR2_RMP && LPTIM_OR_TIM5_ITR1_RMP && LPTIM_OR_TIM9_ITR1_RMP */ __HAL_UNLOCK(htim); @@ -1886,6 +2219,27 @@ HAL_TIM_StateTypeDef HAL_TIMEx_HallSensor_GetState(TIM_HandleTypeDef *htim) return htim->State; } +/** + * @brief Return actual state of the TIM complementary channel. + * @param htim TIM handle + * @param ChannelN TIM Complementary channel + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 + * @arg TIM_CHANNEL_2: TIM Channel 2 + * @arg TIM_CHANNEL_3: TIM Channel 3 + * @retval TIM Complementary channel state + */ +HAL_TIM_ChannelStateTypeDef HAL_TIMEx_GetChannelNState(TIM_HandleTypeDef *htim, uint32_t ChannelN) +{ + HAL_TIM_ChannelStateTypeDef channel_state; + + /* Check the parameters */ + assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, ChannelN)); + + channel_state = TIM_CHANNEL_N_STATE_GET(htim, ChannelN); + + return channel_state; +} /** * @} */ @@ -1938,6 +2292,103 @@ void TIMEx_DMACommutationHalfCplt(DMA_HandleTypeDef *hdma) } +/** + * @brief TIM DMA Delay Pulse complete callback (complementary channel). + * @param hdma pointer to DMA handle. + * @retval None + */ +static void TIM_DMADelayPulseNCplt(DMA_HandleTypeDef *hdma) +{ + TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + + if (hdma == htim->hdma[TIM_DMA_ID_CC1]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_1; + + if (hdma->Init.Mode == DMA_NORMAL) + { + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + } + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC2]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_2; + + if (hdma->Init.Mode == DMA_NORMAL) + { + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + } + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC3]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_3; + + if (hdma->Init.Mode == DMA_NORMAL) + { + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_3, HAL_TIM_CHANNEL_STATE_READY); + } + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC4]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_4; + + if (hdma->Init.Mode == DMA_NORMAL) + { + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_4, HAL_TIM_CHANNEL_STATE_READY); + } + } + else + { + /* nothing to do */ + } + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->PWM_PulseFinishedCallback(htim); +#else + HAL_TIM_PWM_PulseFinishedCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED; +} + +/** + * @brief TIM DMA error callback (complementary channel) + * @param hdma pointer to DMA handle. + * @retval None + */ +static void TIM_DMAErrorCCxN(DMA_HandleTypeDef *hdma) +{ + TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + + if (hdma == htim->hdma[TIM_DMA_ID_CC1]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_1; + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC2]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_2; + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC3]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_3; + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_3, HAL_TIM_CHANNEL_STATE_READY); + } + else + { + /* nothing to do */ + } + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->ErrorCallback(htim); +#else + HAL_TIM_ErrorCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED; +} + /** * @brief Enables or disables the TIM Capture Compare Channel xN. * @param TIMx to select the TIM peripheral diff --git a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_crc.c b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_crc.c index 5d154a7..952c2ad 100644 --- a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_crc.c +++ b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_crc.c @@ -26,7 +26,7 @@ #include "stm32_assert.h" #else #define assert_param(expr) ((void)0U) -#endif +#endif/* USE_FULL_ASSERT */ /** @addtogroup STM32F4xx_LL_Driver * @{ diff --git a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_spi.c b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_spi.c index 53644c6..74ce8d9 100644 --- a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_spi.c +++ b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_spi.c @@ -27,7 +27,7 @@ #include "stm32_assert.h" #else #define assert_param(expr) ((void)0U) -#endif +#endif /* USE_FULL_ASSERT */ /** @addtogroup STM32F4xx_LL_Driver * @{ diff --git a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_usart.c b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_usart.c index ba226a3..5a1a1a0 100644 --- a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_usart.c +++ b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_usart.c @@ -63,45 +63,42 @@ /* __VALUE__ In case of oversampling by 16 and 8, BRR content must be greater than or equal to 16d. */ #define IS_LL_USART_BRR_MIN(__VALUE__) ((__VALUE__) >= 16U) -/* __VALUE__ BRR content must be lower than or equal to 0xFFFF. */ -#define IS_LL_USART_BRR_MAX(__VALUE__) ((__VALUE__) <= 0x0000FFFFU) - #define IS_LL_USART_DIRECTION(__VALUE__) (((__VALUE__) == LL_USART_DIRECTION_NONE) \ - || ((__VALUE__) == LL_USART_DIRECTION_RX) \ - || ((__VALUE__) == LL_USART_DIRECTION_TX) \ - || ((__VALUE__) == LL_USART_DIRECTION_TX_RX)) + || ((__VALUE__) == LL_USART_DIRECTION_RX) \ + || ((__VALUE__) == LL_USART_DIRECTION_TX) \ + || ((__VALUE__) == LL_USART_DIRECTION_TX_RX)) #define IS_LL_USART_PARITY(__VALUE__) (((__VALUE__) == LL_USART_PARITY_NONE) \ - || ((__VALUE__) == LL_USART_PARITY_EVEN) \ - || ((__VALUE__) == LL_USART_PARITY_ODD)) + || ((__VALUE__) == LL_USART_PARITY_EVEN) \ + || ((__VALUE__) == LL_USART_PARITY_ODD)) #define IS_LL_USART_DATAWIDTH(__VALUE__) (((__VALUE__) == LL_USART_DATAWIDTH_8B) \ - || ((__VALUE__) == LL_USART_DATAWIDTH_9B)) + || ((__VALUE__) == LL_USART_DATAWIDTH_9B)) #define IS_LL_USART_OVERSAMPLING(__VALUE__) (((__VALUE__) == LL_USART_OVERSAMPLING_16) \ - || ((__VALUE__) == LL_USART_OVERSAMPLING_8)) + || ((__VALUE__) == LL_USART_OVERSAMPLING_8)) #define IS_LL_USART_LASTBITCLKOUTPUT(__VALUE__) (((__VALUE__) == LL_USART_LASTCLKPULSE_NO_OUTPUT) \ - || ((__VALUE__) == LL_USART_LASTCLKPULSE_OUTPUT)) + || ((__VALUE__) == LL_USART_LASTCLKPULSE_OUTPUT)) #define IS_LL_USART_CLOCKPHASE(__VALUE__) (((__VALUE__) == LL_USART_PHASE_1EDGE) \ - || ((__VALUE__) == LL_USART_PHASE_2EDGE)) + || ((__VALUE__) == LL_USART_PHASE_2EDGE)) #define IS_LL_USART_CLOCKPOLARITY(__VALUE__) (((__VALUE__) == LL_USART_POLARITY_LOW) \ - || ((__VALUE__) == LL_USART_POLARITY_HIGH)) + || ((__VALUE__) == LL_USART_POLARITY_HIGH)) #define IS_LL_USART_CLOCKOUTPUT(__VALUE__) (((__VALUE__) == LL_USART_CLOCK_DISABLE) \ - || ((__VALUE__) == LL_USART_CLOCK_ENABLE)) + || ((__VALUE__) == LL_USART_CLOCK_ENABLE)) #define IS_LL_USART_STOPBITS(__VALUE__) (((__VALUE__) == LL_USART_STOPBITS_0_5) \ - || ((__VALUE__) == LL_USART_STOPBITS_1) \ - || ((__VALUE__) == LL_USART_STOPBITS_1_5) \ - || ((__VALUE__) == LL_USART_STOPBITS_2)) + || ((__VALUE__) == LL_USART_STOPBITS_1) \ + || ((__VALUE__) == LL_USART_STOPBITS_1_5) \ + || ((__VALUE__) == LL_USART_STOPBITS_2)) #define IS_LL_USART_HWCONTROL(__VALUE__) (((__VALUE__) == LL_USART_HWCONTROL_NONE) \ - || ((__VALUE__) == LL_USART_HWCONTROL_RTS) \ - || ((__VALUE__) == LL_USART_HWCONTROL_CTS) \ - || ((__VALUE__) == LL_USART_HWCONTROL_RTS_CTS)) + || ((__VALUE__) == LL_USART_HWCONTROL_RTS) \ + || ((__VALUE__) == LL_USART_HWCONTROL_CTS) \ + || ((__VALUE__) == LL_USART_HWCONTROL_RTS_CTS)) /** * @} @@ -375,9 +372,6 @@ ErrorStatus LL_USART_Init(USART_TypeDef *USARTx, LL_USART_InitTypeDef *USART_Ini /* Check BRR is greater than or equal to 16d */ assert_param(IS_LL_USART_BRR_MIN(USARTx->BRR)); - - /* Check BRR is greater than or equal to 16d */ - assert_param(IS_LL_USART_BRR_MAX(USARTx->BRR)); } } /* Endif (=> USART not in Disabled state => return ERROR) */ diff --git a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_utils.c b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_utils.c index 04039aa..4e5b430 100644 --- a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_utils.c +++ b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_utils.c @@ -232,7 +232,6 @@ */ static uint32_t UTILS_GetPLLOutputFrequency(uint32_t PLL_InputFrequency, LL_UTILS_PLLInitTypeDef *UTILS_PLLInitStruct); -static ErrorStatus UTILS_SetFlashLatency(uint32_t HCLK_Frequency); static ErrorStatus UTILS_EnablePLLAndSwitchSystem(uint32_t SYSCLK_Frequency, LL_UTILS_ClkInitTypeDef *UTILS_ClkInitStruct); static ErrorStatus UTILS_PLL_IsBusy(void); /** @@ -328,6 +327,144 @@ void LL_SetSystemCoreClock(uint32_t HCLKFrequency) SystemCoreClock = HCLKFrequency; } +/** + * @brief Update number of Flash wait states in line with new frequency and current + voltage range. + * @note This Function support ONLY devices with supply voltage (voltage range) between 2.7V and 3.6V + * @param HCLK_Frequency HCLK frequency + * @retval An ErrorStatus enumeration value: + * - SUCCESS: Latency has been modified + * - ERROR: Latency cannot be modified + */ +ErrorStatus LL_SetFlashLatency(uint32_t HCLK_Frequency) +{ + uint32_t timeout; + uint32_t getlatency; + uint32_t latency = LL_FLASH_LATENCY_0; /* default value 0WS */ + ErrorStatus status = SUCCESS; + + + /* Frequency cannot be equal to 0 */ + if(HCLK_Frequency == 0U) + { + status = ERROR; + } + else + { + if(LL_PWR_GetRegulVoltageScaling() == LL_PWR_REGU_VOLTAGE_SCALE1) + { +#if defined (UTILS_SCALE1_LATENCY5_FREQ) + if((HCLK_Frequency > UTILS_SCALE1_LATENCY5_FREQ)&&(latency == LL_FLASH_LATENCY_0)) + { + latency = LL_FLASH_LATENCY_5; + } +#endif /*UTILS_SCALE1_LATENCY5_FREQ */ +#if defined (UTILS_SCALE1_LATENCY4_FREQ) + if((HCLK_Frequency > UTILS_SCALE1_LATENCY4_FREQ)&&(latency == LL_FLASH_LATENCY_0)) + { + latency = LL_FLASH_LATENCY_4; + } +#endif /* UTILS_SCALE1_LATENCY4_FREQ */ +#if defined (UTILS_SCALE1_LATENCY3_FREQ) + if((HCLK_Frequency > UTILS_SCALE1_LATENCY3_FREQ)&&(latency == LL_FLASH_LATENCY_0)) + { + latency = LL_FLASH_LATENCY_3; + } +#endif /* UTILS_SCALE1_LATENCY3_FREQ */ +#if defined (UTILS_SCALE1_LATENCY2_FREQ) + if((HCLK_Frequency > UTILS_SCALE1_LATENCY2_FREQ)&&(latency == LL_FLASH_LATENCY_0)) + { + latency = LL_FLASH_LATENCY_2; + } + else + { + if((HCLK_Frequency > UTILS_SCALE1_LATENCY1_FREQ)&&(latency == LL_FLASH_LATENCY_0)) + { + latency = LL_FLASH_LATENCY_1; + } + } +#endif /* UTILS_SCALE1_LATENCY2_FREQ */ + } + if(LL_PWR_GetRegulVoltageScaling() == LL_PWR_REGU_VOLTAGE_SCALE2) + { +#if defined (UTILS_SCALE2_LATENCY5_FREQ) + if((HCLK_Frequency > UTILS_SCALE2_LATENCY5_FREQ)&&(latency == LL_FLASH_LATENCY_0)) + { + latency = LL_FLASH_LATENCY_5; + } +#endif /*UTILS_SCALE1_LATENCY5_FREQ */ +#if defined (UTILS_SCALE2_LATENCY4_FREQ) + if((HCLK_Frequency > UTILS_SCALE2_LATENCY4_FREQ)&&(latency == LL_FLASH_LATENCY_0)) + { + latency = LL_FLASH_LATENCY_4; + } +#endif /*UTILS_SCALE1_LATENCY4_FREQ */ +#if defined (UTILS_SCALE2_LATENCY3_FREQ) + if((HCLK_Frequency > UTILS_SCALE2_LATENCY3_FREQ)&&(latency == LL_FLASH_LATENCY_0)) + { + latency = LL_FLASH_LATENCY_3; + } +#endif /*UTILS_SCALE1_LATENCY3_FREQ */ + if((HCLK_Frequency > UTILS_SCALE2_LATENCY2_FREQ)&&(latency == LL_FLASH_LATENCY_0)) + { + latency = LL_FLASH_LATENCY_2; + } + else + { + if((HCLK_Frequency > UTILS_SCALE2_LATENCY1_FREQ)&&(latency == LL_FLASH_LATENCY_0)) + { + latency = LL_FLASH_LATENCY_1; + } + } + } +#if defined (LL_PWR_REGU_VOLTAGE_SCALE3) + if(LL_PWR_GetRegulVoltageScaling() == LL_PWR_REGU_VOLTAGE_SCALE3) + { +#if defined (UTILS_SCALE3_LATENCY3_FREQ) + if((HCLK_Frequency > UTILS_SCALE3_LATENCY3_FREQ)&&(latency == LL_FLASH_LATENCY_0)) + { + latency = LL_FLASH_LATENCY_3; + } +#endif /*UTILS_SCALE1_LATENCY3_FREQ */ +#if defined (UTILS_SCALE3_LATENCY2_FREQ) + if((HCLK_Frequency > UTILS_SCALE3_LATENCY2_FREQ)&&(latency == LL_FLASH_LATENCY_0)) + { + latency = LL_FLASH_LATENCY_2; + } + else + { + if((HCLK_Frequency > UTILS_SCALE3_LATENCY1_FREQ)&&(latency == LL_FLASH_LATENCY_0)) + { + latency = LL_FLASH_LATENCY_1; + } + } + } +#endif /*UTILS_SCALE1_LATENCY2_FREQ */ +#endif /* LL_PWR_REGU_VOLTAGE_SCALE3 */ + + LL_FLASH_SetLatency(latency); + /* Check that the new number of wait states is taken into account to access the Flash + memory by reading the FLASH_ACR register */ + timeout = 2; + do + { + /* Wait for Flash latency to be updated */ + getlatency = LL_FLASH_GetLatency(); + timeout--; + } while ((getlatency != latency) && (timeout > 0)); + + if(getlatency != latency) + { + status = ERROR; + } + else + { + status = SUCCESS; + } + } + return status; +} + /** * @brief This function configures system clock at maximum frequency with HSI as clock source of the PLL * @note The application need to ensure that PLL is disabled. @@ -465,131 +602,6 @@ ErrorStatus LL_PLL_ConfigSystemClock_HSE(uint32_t HSEFrequency, uint32_t HSEBypa /** @addtogroup UTILS_LL_Private_Functions * @{ */ -/** - * @brief Update number of Flash wait states in line with new frequency and current - voltage range. - * @note This Function support ONLY devices with supply voltage (voltage range) between 2.7V and 3.6V - * @param HCLK_Frequency HCLK frequency - * @retval An ErrorStatus enumeration value: - * - SUCCESS: Latency has been modified - * - ERROR: Latency cannot be modified - */ -static ErrorStatus UTILS_SetFlashLatency(uint32_t HCLK_Frequency) -{ - ErrorStatus status = SUCCESS; - - uint32_t latency = LL_FLASH_LATENCY_0; /* default value 0WS */ - - /* Frequency cannot be equal to 0 */ - if(HCLK_Frequency == 0U) - { - status = ERROR; - } - else - { - if(LL_PWR_GetRegulVoltageScaling() == LL_PWR_REGU_VOLTAGE_SCALE1) - { -#if defined (UTILS_SCALE1_LATENCY5_FREQ) - if((HCLK_Frequency > UTILS_SCALE1_LATENCY5_FREQ)&&(latency == LL_FLASH_LATENCY_0)) - { - latency = LL_FLASH_LATENCY_5; - } -#endif /*UTILS_SCALE1_LATENCY5_FREQ */ -#if defined (UTILS_SCALE1_LATENCY4_FREQ) - if((HCLK_Frequency > UTILS_SCALE1_LATENCY4_FREQ)&&(latency == LL_FLASH_LATENCY_0)) - { - latency = LL_FLASH_LATENCY_4; - } -#endif /* UTILS_SCALE1_LATENCY4_FREQ */ -#if defined (UTILS_SCALE1_LATENCY3_FREQ) - if((HCLK_Frequency > UTILS_SCALE1_LATENCY3_FREQ)&&(latency == LL_FLASH_LATENCY_0)) - { - latency = LL_FLASH_LATENCY_3; - } -#endif /* UTILS_SCALE1_LATENCY3_FREQ */ -#if defined (UTILS_SCALE1_LATENCY2_FREQ) - if((HCLK_Frequency > UTILS_SCALE1_LATENCY2_FREQ)&&(latency == LL_FLASH_LATENCY_0)) - { - latency = LL_FLASH_LATENCY_2; - } - else - { - if((HCLK_Frequency > UTILS_SCALE1_LATENCY1_FREQ)&&(latency == LL_FLASH_LATENCY_0)) - { - latency = LL_FLASH_LATENCY_1; - } - } -#endif /* UTILS_SCALE1_LATENCY2_FREQ */ - } - if(LL_PWR_GetRegulVoltageScaling() == LL_PWR_REGU_VOLTAGE_SCALE2) - { -#if defined (UTILS_SCALE2_LATENCY5_FREQ) - if((HCLK_Frequency > UTILS_SCALE2_LATENCY5_FREQ)&&(latency == LL_FLASH_LATENCY_0)) - { - latency = LL_FLASH_LATENCY_5; - } -#endif /*UTILS_SCALE1_LATENCY5_FREQ */ -#if defined (UTILS_SCALE2_LATENCY4_FREQ) - if((HCLK_Frequency > UTILS_SCALE2_LATENCY4_FREQ)&&(latency == LL_FLASH_LATENCY_0)) - { - latency = LL_FLASH_LATENCY_4; - } -#endif /*UTILS_SCALE1_LATENCY4_FREQ */ -#if defined (UTILS_SCALE2_LATENCY3_FREQ) - if((HCLK_Frequency > UTILS_SCALE2_LATENCY3_FREQ)&&(latency == LL_FLASH_LATENCY_0)) - { - latency = LL_FLASH_LATENCY_3; - } -#endif /*UTILS_SCALE1_LATENCY3_FREQ */ - if((HCLK_Frequency > UTILS_SCALE2_LATENCY2_FREQ)&&(latency == LL_FLASH_LATENCY_0)) - { - latency = LL_FLASH_LATENCY_2; - } - else - { - if((HCLK_Frequency > UTILS_SCALE2_LATENCY1_FREQ)&&(latency == LL_FLASH_LATENCY_0)) - { - latency = LL_FLASH_LATENCY_1; - } - } - } -#if defined (LL_PWR_REGU_VOLTAGE_SCALE3) - if(LL_PWR_GetRegulVoltageScaling() == LL_PWR_REGU_VOLTAGE_SCALE3) - { -#if defined (UTILS_SCALE3_LATENCY3_FREQ) - if((HCLK_Frequency > UTILS_SCALE3_LATENCY3_FREQ)&&(latency == LL_FLASH_LATENCY_0)) - { - latency = LL_FLASH_LATENCY_3; - } -#endif /*UTILS_SCALE1_LATENCY3_FREQ */ -#if defined (UTILS_SCALE3_LATENCY2_FREQ) - if((HCLK_Frequency > UTILS_SCALE3_LATENCY2_FREQ)&&(latency == LL_FLASH_LATENCY_0)) - { - latency = LL_FLASH_LATENCY_2; - } - else - { - if((HCLK_Frequency > UTILS_SCALE3_LATENCY1_FREQ)&&(latency == LL_FLASH_LATENCY_0)) - { - latency = LL_FLASH_LATENCY_1; - } - } - } -#endif /*UTILS_SCALE1_LATENCY2_FREQ */ -#endif /* LL_PWR_REGU_VOLTAGE_SCALE3 */ - - LL_FLASH_SetLatency(latency); - - /* Check that the new number of wait states is taken into account to access the Flash - memory by reading the FLASH_ACR register */ - if(LL_FLASH_GetLatency() != latency) - { - status = ERROR; - } - } - return status; -} - /** * @brief Function to check that PLL can be modified * @param PLL_InputFrequency PLL input frequency (in Hz) @@ -683,7 +695,7 @@ static ErrorStatus UTILS_EnablePLLAndSwitchSystem(uint32_t SYSCLK_Frequency, LL_ if(SystemCoreClock < hclk_frequency) { /* Set FLASH latency to highest latency */ - status = UTILS_SetFlashLatency(hclk_frequency); + status = LL_SetFlashLatency(hclk_frequency); } /* Update system clock configuration */ @@ -713,7 +725,7 @@ static ErrorStatus UTILS_EnablePLLAndSwitchSystem(uint32_t SYSCLK_Frequency, LL_ if(SystemCoreClock > hclk_frequency) { /* Set FLASH latency to lowest latency */ - status = UTILS_SetFlashLatency(hclk_frequency); + status = LL_SetFlashLatency(hclk_frequency); } /* Update SystemCoreClock variable */ diff --git a/F407_test.ioc b/F407_test.ioc index d0f18b5..e97ff6c 100644 --- a/F407_test.ioc +++ b/F407_test.ioc @@ -98,8 +98,8 @@ Mcu.PinsNb=40 Mcu.ThirdPartyNb=0 Mcu.UserConstants= Mcu.UserName=STM32F407VETx -MxCube.Version=5.5.0 -MxDb.Version=DB.5.0.50 +MxCube.Version=6.3.0 +MxDb.Version=DB.6.0.30 NVIC.BusFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false NVIC.DMA2_Stream2_IRQn=true\:0\:0\:false\:false\:true\:false\:true NVIC.DMA2_Stream4_IRQn=true\:0\:0\:false\:false\:true\:true\:true @@ -155,14 +155,6 @@ PC5.GPIOParameters=GPIO_Label PC5.GPIO_Label=PENIRQ PC5.Locked=true PC5.Signal=GPIO_Input -PCC.Checker=false -PCC.Line=STM32F407/417 -PCC.MCU=STM32F407V(E-G)Tx -PCC.PartNumber=STM32F407VETx -PCC.Seq0=0 -PCC.Series=STM32F4 -PCC.Temperature=25 -PCC.Vdd=3.3 PD0.Mode=16b-d1 PD0.Signal=FSMC_D2 PD1.Mode=16b-d1 @@ -225,7 +217,7 @@ ProjectManager.CustomerFirmwarePackage= ProjectManager.DefaultFWLocation=true ProjectManager.DeletePrevious=true ProjectManager.DeviceId=STM32F407VETx -ProjectManager.FirmwarePackage=STM32Cube FW_F4 V1.24.2 +ProjectManager.FirmwarePackage=STM32Cube FW_F4 V1.26.2 ProjectManager.FreePins=false ProjectManager.HalAssertFull=false ProjectManager.HeapSize=0x200 @@ -238,6 +230,7 @@ ProjectManager.PreviousToolchain= ProjectManager.ProjectBuild=false ProjectManager.ProjectFileName=F407_test.ioc ProjectManager.ProjectName=F407_test +ProjectManager.RegisterCallBack= ProjectManager.StackSize=0x400 ProjectManager.TargetToolchain=STM32CubeIDE ProjectManager.ToolChainLocation= diff --git a/Inc/crc.h b/Inc/crc.h index 462e1b3..c84e168 100644 --- a/Inc/crc.h +++ b/Inc/crc.h @@ -1,12 +1,12 @@ /** ****************************************************************************** - * File Name : CRC.h - * Description : This file provides code for the configuration - * of the CRC instances. + * @file crc.h + * @brief This file contains all the function prototypes for + * the crc.c file ****************************************************************************** * @attention * - *

© Copyright (c) 2020 STMicroelectronics. + *

© Copyright (c) 2021 STMicroelectronics. * All rights reserved.

* * This software component is licensed by ST under BSD 3-Clause license, @@ -17,10 +17,11 @@ ****************************************************************************** */ /* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __crc_H -#define __crc_H +#ifndef __CRC_H__ +#define __CRC_H__ + #ifdef __cplusplus - extern "C" { +extern "C" { #endif /* Includes ------------------------------------------------------------------*/ @@ -43,14 +44,7 @@ void MX_CRC_Init(void); #ifdef __cplusplus } #endif -#endif /*__ crc_H */ -/** - * @} - */ - -/** - * @} - */ +#endif /* __CRC_H__ */ /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/Inc/dma.h b/Inc/dma.h index 16bb88c..052393e 100644 --- a/Inc/dma.h +++ b/Inc/dma.h @@ -1,12 +1,12 @@ /** ****************************************************************************** - * File Name : dma.h - * Description : This file contains all the function prototypes for - * the dma.c file + * @file dma.h + * @brief This file contains all the function prototypes for + * the dma.c file ****************************************************************************** * @attention * - *

© Copyright (c) 2020 STMicroelectronics. + *

© Copyright (c) 2021 STMicroelectronics. * All rights reserved.

* * This software component is licensed by ST under BSD 3-Clause license, @@ -17,11 +17,11 @@ ****************************************************************************** */ /* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __dma_H -#define __dma_H +#ifndef __DMA_H__ +#define __DMA_H__ #ifdef __cplusplus - extern "C" { +extern "C" { #endif /* Includes ------------------------------------------------------------------*/ @@ -47,10 +47,6 @@ void MX_DMA_Init(void); } #endif -#endif /* __dma_H */ - -/** - * @} - */ +#endif /* __DMA_H__ */ /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/Inc/fsmc.h b/Inc/fsmc.h index 03ed64a..109369f 100644 --- a/Inc/fsmc.h +++ b/Inc/fsmc.h @@ -6,7 +6,7 @@ ****************************************************************************** * @attention * - *

© Copyright (c) 2020 STMicroelectronics. + *

© Copyright (c) 2021 STMicroelectronics. * All rights reserved.

* * This software component is licensed by ST under BSD 3-Clause license, diff --git a/Inc/gpio.h b/Inc/gpio.h index 6a60e56..5dd191b 100644 --- a/Inc/gpio.h +++ b/Inc/gpio.h @@ -1,12 +1,12 @@ /** ****************************************************************************** - * File Name : gpio.h - * Description : This file contains all the functions prototypes for - * the gpio + * @file gpio.h + * @brief This file contains all the function prototypes for + * the gpio.c file ****************************************************************************** * @attention * - *

© Copyright (c) 2020 STMicroelectronics. + *

© Copyright (c) 2021 STMicroelectronics. * All rights reserved.

* * This software component is licensed by ST under BSD 3-Clause license, @@ -16,12 +16,12 @@ * ****************************************************************************** */ - /* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __gpio_H -#define __gpio_H +#ifndef __GPIO_H__ +#define __GPIO_H__ + #ifdef __cplusplus - extern "C" { +extern "C" { #endif /* Includes ------------------------------------------------------------------*/ @@ -44,14 +44,6 @@ void MX_GPIO_Init(void); #ifdef __cplusplus } #endif -#endif /*__ pinoutConfig_H */ - -/** - * @} - */ - -/** - * @} - */ +#endif /*__ GPIO_H__ */ /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/Inc/main.h b/Inc/main.h index 7cba1a0..734207c 100644 --- a/Inc/main.h +++ b/Inc/main.h @@ -29,13 +29,12 @@ extern "C" { /* Includes ------------------------------------------------------------------*/ #include "stm32f4xx_hal.h" + #include "stm32f4xx_ll_crc.h" #include "stm32f4xx_ll_dma.h" -#include "stm32f4xx_hal.h" #include "stm32f4xx_ll_spi.h" #include "stm32f4xx_ll_usart.h" #include "stm32f4xx_ll_rcc.h" -#include "stm32f4xx.h" #include "stm32f4xx_ll_system.h" #include "stm32f4xx_ll_gpio.h" #include "stm32f4xx_ll_exti.h" diff --git a/Inc/spi.h b/Inc/spi.h index 7af75b7..272aeea 100644 --- a/Inc/spi.h +++ b/Inc/spi.h @@ -1,12 +1,12 @@ /** ****************************************************************************** - * File Name : SPI.h - * Description : This file provides code for the configuration - * of the SPI instances. + * @file spi.h + * @brief This file contains all the function prototypes for + * the spi.c file ****************************************************************************** * @attention * - *

© Copyright (c) 2020 STMicroelectronics. + *

© Copyright (c) 2021 STMicroelectronics. * All rights reserved.

* * This software component is licensed by ST under BSD 3-Clause license, @@ -17,10 +17,11 @@ ****************************************************************************** */ /* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __spi_H -#define __spi_H +#ifndef __SPI_H__ +#define __SPI_H__ + #ifdef __cplusplus - extern "C" { +extern "C" { #endif /* Includes ------------------------------------------------------------------*/ @@ -43,14 +44,7 @@ void MX_SPI2_Init(void); #ifdef __cplusplus } #endif -#endif /*__ spi_H */ -/** - * @} - */ - -/** - * @} - */ +#endif /* __SPI_H__ */ /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/Inc/stm32_assert.h b/Inc/stm32_assert.h index 8cc8064..ca09699 100644 --- a/Inc/stm32_assert.h +++ b/Inc/stm32_assert.h @@ -5,7 +5,7 @@ ****************************************************************************** * @attention * - *

© Copyright (c) 2018 STMicroelectronics. + *

© Copyright (c) 2018 STMicroelectronics. * All rights reserved.

* * This software component is licensed by ST under BSD 3-Clause license, diff --git a/Inc/stm32f4xx_hal_conf.h b/Inc/stm32f4xx_hal_conf.h index 39247a8..9a84067 100644 --- a/Inc/stm32f4xx_hal_conf.h +++ b/Inc/stm32f4xx_hal_conf.h @@ -2,7 +2,7 @@ ****************************************************************************** * @file stm32f4xx_hal_conf_template.h * @author MCD Application Team - * @brief HAL configuration template file. + * @brief HAL configuration template file. * This file should be copied to the application folder and renamed * to stm32f4xx_hal_conf.h. ****************************************************************************** @@ -17,7 +17,7 @@ * opensource.org/licenses/BSD-3-Clause * ****************************************************************************** - */ + */ /* Define to prevent recursive inclusion -------------------------------------*/ #ifndef __STM32F4xx_HAL_CONF_H @@ -32,14 +32,15 @@ /* ########################## Module Selection ############################## */ /** - * @brief This is the list of modules to be used in the HAL driver + * @brief This is the list of modules to be used in the HAL driver */ -#define HAL_MODULE_ENABLED +#define HAL_MODULE_ENABLED /* #define HAL_ADC_MODULE_ENABLED */ /* #define HAL_CRYP_MODULE_ENABLED */ /* #define HAL_CAN_MODULE_ENABLED */ /* #define HAL_CRC_MODULE_ENABLED */ +/* #define HAL_CAN_LEGACY_MODULE_ENABLED */ /* #define HAL_CRYP_MODULE_ENABLED */ /* #define HAL_DAC_MODULE_ENABLED */ /* #define HAL_DCMI_MODULE_ENABLED */ @@ -75,6 +76,7 @@ /* #define HAL_QSPI_MODULE_ENABLED */ /* #define HAL_CEC_MODULE_ENABLED */ /* #define HAL_FMPI2C_MODULE_ENABLED */ +/* #define HAL_FMPSMBUS_MODULE_ENABLED */ /* #define HAL_SPDIFRX_MODULE_ENABLED */ /* #define HAL_DFSDM_MODULE_ENABLED */ /* #define HAL_LPTIM_MODULE_ENABLED */ @@ -90,20 +92,20 @@ /** * @brief Adjust the value of External High Speed oscillator (HSE) used in your application. * This value is used by the RCC HAL module to compute the system frequency - * (when HSE is used as system clock source, directly or through the PLL). + * (when HSE is used as system clock source, directly or through the PLL). */ -#if !defined (HSE_VALUE) - #define HSE_VALUE ((uint32_t)8000000U) /*!< Value of the External oscillator in Hz */ +#if !defined (HSE_VALUE) + #define HSE_VALUE 8000000U /*!< Value of the External oscillator in Hz */ #endif /* HSE_VALUE */ #if !defined (HSE_STARTUP_TIMEOUT) - #define HSE_STARTUP_TIMEOUT ((uint32_t)100U) /*!< Time out for HSE start up, in ms */ + #define HSE_STARTUP_TIMEOUT 100U /*!< Time out for HSE start up, in ms */ #endif /* HSE_STARTUP_TIMEOUT */ /** * @brief Internal High Speed oscillator (HSI) value. * This value is used by the RCC HAL module to compute the system frequency - * (when HSI is used as system clock source, directly or through the PLL). + * (when HSI is used as system clock source, directly or through the PLL). */ #if !defined (HSI_VALUE) #define HSI_VALUE ((uint32_t)16000000U) /*!< Value of the Internal oscillator in Hz*/ @@ -112,8 +114,8 @@ /** * @brief Internal Low Speed oscillator (LSI) value. */ -#if !defined (LSI_VALUE) - #define LSI_VALUE ((uint32_t)32000U) /*!< LSI Typical Value in Hz*/ +#if !defined (LSI_VALUE) + #define LSI_VALUE 32000U /*!< LSI Typical Value in Hz*/ #endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz The real value may vary depending on the variations in voltage and temperature.*/ @@ -121,20 +123,20 @@ * @brief External Low Speed oscillator (LSE) value. */ #if !defined (LSE_VALUE) - #define LSE_VALUE ((uint32_t)32768U) /*!< Value of the External Low Speed oscillator in Hz */ + #define LSE_VALUE 32768U /*!< Value of the External Low Speed oscillator in Hz */ #endif /* LSE_VALUE */ #if !defined (LSE_STARTUP_TIMEOUT) - #define LSE_STARTUP_TIMEOUT ((uint32_t)5000U) /*!< Time out for LSE start up, in ms */ + #define LSE_STARTUP_TIMEOUT 5000U /*!< Time out for LSE start up, in ms */ #endif /* LSE_STARTUP_TIMEOUT */ /** * @brief External clock source for I2S peripheral - * This value is used by the I2S HAL module to compute the I2S clock source - * frequency, this source is inserted directly through I2S_CKIN pad. + * This value is used by the I2S HAL module to compute the I2S clock source + * frequency, this source is inserted directly through I2S_CKIN pad. */ #if !defined (EXTERNAL_CLOCK_VALUE) - #define EXTERNAL_CLOCK_VALUE ((uint32_t)12288000U) /*!< Value of the External audio frequency in Hz*/ + #define EXTERNAL_CLOCK_VALUE 12288000U /*!< Value of the External audio frequency in Hz*/ #endif /* EXTERNAL_CLOCK_VALUE */ /* Tip: To avoid modifying this file each time you need to use different HSE, @@ -144,16 +146,56 @@ /** * @brief This is the HAL system configuration section */ -#define VDD_VALUE ((uint32_t)3300U) /*!< Value of VDD in mv */ -#define TICK_INT_PRIORITY ((uint32_t)0U) /*!< tick interrupt priority */ -#define USE_RTOS 0U +#define VDD_VALUE 3300U /*!< Value of VDD in mv */ +#define TICK_INT_PRIORITY 0U /*!< tick interrupt priority */ +#define USE_RTOS 0U #define PREFETCH_ENABLE 1U #define INSTRUCTION_CACHE_ENABLE 1U #define DATA_CACHE_ENABLE 1U +#define USE_HAL_ADC_REGISTER_CALLBACKS 0U /* ADC register callback disabled */ +#define USE_HAL_CAN_REGISTER_CALLBACKS 0U /* CAN register callback disabled */ +#define USE_HAL_CEC_REGISTER_CALLBACKS 0U /* CEC register callback disabled */ +#define USE_HAL_CRYP_REGISTER_CALLBACKS 0U /* CRYP register callback disabled */ +#define USE_HAL_DAC_REGISTER_CALLBACKS 0U /* DAC register callback disabled */ +#define USE_HAL_DCMI_REGISTER_CALLBACKS 0U /* DCMI register callback disabled */ +#define USE_HAL_DFSDM_REGISTER_CALLBACKS 0U /* DFSDM register callback disabled */ +#define USE_HAL_DMA2D_REGISTER_CALLBACKS 0U /* DMA2D register callback disabled */ +#define USE_HAL_DSI_REGISTER_CALLBACKS 0U /* DSI register callback disabled */ +#define USE_HAL_ETH_REGISTER_CALLBACKS 0U /* ETH register callback disabled */ +#define USE_HAL_HASH_REGISTER_CALLBACKS 0U /* HASH register callback disabled */ +#define USE_HAL_HCD_REGISTER_CALLBACKS 0U /* HCD register callback disabled */ +#define USE_HAL_I2C_REGISTER_CALLBACKS 0U /* I2C register callback disabled */ +#define USE_HAL_FMPI2C_REGISTER_CALLBACKS 0U /* FMPI2C register callback disabled */ +#define USE_HAL_FMPSMBUS_REGISTER_CALLBACKS 0U /* FMPSMBUS register callback disabled */ +#define USE_HAL_I2S_REGISTER_CALLBACKS 0U /* I2S register callback disabled */ +#define USE_HAL_IRDA_REGISTER_CALLBACKS 0U /* IRDA register callback disabled */ +#define USE_HAL_LPTIM_REGISTER_CALLBACKS 0U /* LPTIM register callback disabled */ +#define USE_HAL_LTDC_REGISTER_CALLBACKS 0U /* LTDC register callback disabled */ +#define USE_HAL_MMC_REGISTER_CALLBACKS 0U /* MMC register callback disabled */ +#define USE_HAL_NAND_REGISTER_CALLBACKS 0U /* NAND register callback disabled */ +#define USE_HAL_NOR_REGISTER_CALLBACKS 0U /* NOR register callback disabled */ +#define USE_HAL_PCCARD_REGISTER_CALLBACKS 0U /* PCCARD register callback disabled */ +#define USE_HAL_PCD_REGISTER_CALLBACKS 0U /* PCD register callback disabled */ +#define USE_HAL_QSPI_REGISTER_CALLBACKS 0U /* QSPI register callback disabled */ +#define USE_HAL_RNG_REGISTER_CALLBACKS 0U /* RNG register callback disabled */ +#define USE_HAL_RTC_REGISTER_CALLBACKS 0U /* RTC register callback disabled */ +#define USE_HAL_SAI_REGISTER_CALLBACKS 0U /* SAI register callback disabled */ +#define USE_HAL_SD_REGISTER_CALLBACKS 0U /* SD register callback disabled */ +#define USE_HAL_SMARTCARD_REGISTER_CALLBACKS 0U /* SMARTCARD register callback disabled */ +#define USE_HAL_SDRAM_REGISTER_CALLBACKS 0U /* SDRAM register callback disabled */ +#define USE_HAL_SRAM_REGISTER_CALLBACKS 0U /* SRAM register callback disabled */ +#define USE_HAL_SPDIFRX_REGISTER_CALLBACKS 0U /* SPDIFRX register callback disabled */ +#define USE_HAL_SMBUS_REGISTER_CALLBACKS 0U /* SMBUS register callback disabled */ +#define USE_HAL_SPI_REGISTER_CALLBACKS 0U /* SPI register callback disabled */ +#define USE_HAL_TIM_REGISTER_CALLBACKS 0U /* TIM register callback disabled */ +#define USE_HAL_UART_REGISTER_CALLBACKS 0U /* UART register callback disabled */ +#define USE_HAL_USART_REGISTER_CALLBACKS 0U /* USART register callback disabled */ +#define USE_HAL_WWDG_REGISTER_CALLBACKS 0U /* WWDG register callback disabled */ + /* ########################## Assert Selection ############################## */ /** - * @brief Uncomment the line below to expanse the "assert_param" macro in the + * @brief Uncomment the line below to expanse the "assert_param" macro in the * HAL drivers code */ /* #define USE_FULL_ASSERT 1U */ @@ -170,29 +212,29 @@ #define MAC_ADDR4 0U #define MAC_ADDR5 0U -/* Definition of the Ethernet driver buffers size and count */ +/* Definition of the Ethernet driver buffers size and count */ #define ETH_RX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for receive */ #define ETH_TX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for transmit */ -#define ETH_RXBUFNB ((uint32_t)4U) /* 4 Rx buffers of size ETH_RX_BUF_SIZE */ -#define ETH_TXBUFNB ((uint32_t)4U) /* 4 Tx buffers of size ETH_TX_BUF_SIZE */ +#define ETH_RXBUFNB 4U /* 4 Rx buffers of size ETH_RX_BUF_SIZE */ +#define ETH_TXBUFNB 4U /* 4 Tx buffers of size ETH_TX_BUF_SIZE */ /* Section 2: PHY configuration section */ -/* DP83848_PHY_ADDRESS Address*/ +/* DP83848_PHY_ADDRESS Address*/ #define DP83848_PHY_ADDRESS 0x01U -/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/ -#define PHY_RESET_DELAY ((uint32_t)0x000000FFU) +/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/ +#define PHY_RESET_DELAY 0x000000FFU /* PHY Configuration delay */ -#define PHY_CONFIG_DELAY ((uint32_t)0x00000FFFU) +#define PHY_CONFIG_DELAY 0x00000FFFU -#define PHY_READ_TO ((uint32_t)0x0000FFFFU) -#define PHY_WRITE_TO ((uint32_t)0x0000FFFFU) +#define PHY_READ_TO 0x0000FFFFU +#define PHY_WRITE_TO 0x0000FFFFU /* Section 3: Common PHY Registers */ #define PHY_BCR ((uint16_t)0x0000U) /*!< Transceiver Basic Control Register */ #define PHY_BSR ((uint16_t)0x0001U) /*!< Transceiver Basic Status Register */ - + #define PHY_RESET ((uint16_t)0x8000U) /*!< PHY Reset */ #define PHY_LOOPBACK ((uint16_t)0x4000U) /*!< Select loop-back mode */ #define PHY_FULLDUPLEX_100M ((uint16_t)0x2100U) /*!< Set the full-duplex mode at 100 Mb/s */ @@ -207,7 +249,7 @@ #define PHY_AUTONEGO_COMPLETE ((uint16_t)0x0020U) /*!< Auto-Negotiation process completed */ #define PHY_LINKED_STATUS ((uint16_t)0x0004U) /*!< Valid link established */ #define PHY_JABBER_DETECTION ((uint16_t)0x0002U) /*!< Jabber condition detected */ - + /* Section 4: Extended PHY Registers */ #define PHY_SR ((uint16_t)0x10U) /*!< PHY status register Offset */ @@ -225,25 +267,25 @@ /* Includes ------------------------------------------------------------------*/ /** - * @brief Include module's header file + * @brief Include module's header file */ #ifdef HAL_RCC_MODULE_ENABLED #include "stm32f4xx_hal_rcc.h" #endif /* HAL_RCC_MODULE_ENABLED */ -#ifdef HAL_EXTI_MODULE_ENABLED - #include "stm32f4xx_hal_exti.h" -#endif /* HAL_EXTI_MODULE_ENABLED */ - #ifdef HAL_GPIO_MODULE_ENABLED #include "stm32f4xx_hal_gpio.h" #endif /* HAL_GPIO_MODULE_ENABLED */ +#ifdef HAL_EXTI_MODULE_ENABLED + #include "stm32f4xx_hal_exti.h" +#endif /* HAL_EXTI_MODULE_ENABLED */ + #ifdef HAL_DMA_MODULE_ENABLED #include "stm32f4xx_hal_dma.h" #endif /* HAL_DMA_MODULE_ENABLED */ - + #ifdef HAL_CORTEX_MODULE_ENABLED #include "stm32f4xx_hal_cortex.h" #endif /* HAL_CORTEX_MODULE_ENABLED */ @@ -256,18 +298,18 @@ #include "stm32f4xx_hal_can.h" #endif /* HAL_CAN_MODULE_ENABLED */ +#ifdef HAL_CAN_LEGACY_MODULE_ENABLED + #include "stm32f4xx_hal_can_legacy.h" +#endif /* HAL_CAN_LEGACY_MODULE_ENABLED */ + #ifdef HAL_CRC_MODULE_ENABLED #include "stm32f4xx_hal_crc.h" #endif /* HAL_CRC_MODULE_ENABLED */ #ifdef HAL_CRYP_MODULE_ENABLED - #include "stm32f4xx_hal_cryp.h" + #include "stm32f4xx_hal_cryp.h" #endif /* HAL_CRYP_MODULE_ENABLED */ -#ifdef HAL_SMBUS_MODULE_ENABLED -#include "stm32f4xx_hal_smbus.h" -#endif /* HAL_SMBUS_MODULE_ENABLED */ - #ifdef HAL_DMA2D_MODULE_ENABLED #include "stm32f4xx_hal_dma2d.h" #endif /* HAL_DMA2D_MODULE_ENABLED */ @@ -287,7 +329,7 @@ #ifdef HAL_FLASH_MODULE_ENABLED #include "stm32f4xx_hal_flash.h" #endif /* HAL_FLASH_MODULE_ENABLED */ - + #ifdef HAL_SRAM_MODULE_ENABLED #include "stm32f4xx_hal_sram.h" #endif /* HAL_SRAM_MODULE_ENABLED */ @@ -302,11 +344,11 @@ #ifdef HAL_PCCARD_MODULE_ENABLED #include "stm32f4xx_hal_pccard.h" -#endif /* HAL_PCCARD_MODULE_ENABLED */ - +#endif /* HAL_PCCARD_MODULE_ENABLED */ + #ifdef HAL_SDRAM_MODULE_ENABLED #include "stm32f4xx_hal_sdram.h" -#endif /* HAL_SDRAM_MODULE_ENABLED */ +#endif /* HAL_SDRAM_MODULE_ENABLED */ #ifdef HAL_HASH_MODULE_ENABLED #include "stm32f4xx_hal_hash.h" @@ -316,6 +358,10 @@ #include "stm32f4xx_hal_i2c.h" #endif /* HAL_I2C_MODULE_ENABLED */ +#ifdef HAL_SMBUS_MODULE_ENABLED + #include "stm32f4xx_hal_smbus.h" +#endif /* HAL_SMBUS_MODULE_ENABLED */ + #ifdef HAL_I2S_MODULE_ENABLED #include "stm32f4xx_hal_i2s.h" #endif /* HAL_I2S_MODULE_ENABLED */ @@ -348,10 +394,6 @@ #include "stm32f4xx_hal_sd.h" #endif /* HAL_SD_MODULE_ENABLED */ -#ifdef HAL_MMC_MODULE_ENABLED - #include "stm32f4xx_hal_mmc.h" -#endif /* HAL_MMC_MODULE_ENABLED */ - #ifdef HAL_SPI_MODULE_ENABLED #include "stm32f4xx_hal_spi.h" #endif /* HAL_SPI_MODULE_ENABLED */ @@ -387,7 +429,7 @@ #ifdef HAL_HCD_MODULE_ENABLED #include "stm32f4xx_hal_hcd.h" #endif /* HAL_HCD_MODULE_ENABLED */ - + #ifdef HAL_DSI_MODULE_ENABLED #include "stm32f4xx_hal_dsi.h" #endif /* HAL_DSI_MODULE_ENABLED */ @@ -404,6 +446,10 @@ #include "stm32f4xx_hal_fmpi2c.h" #endif /* HAL_FMPI2C_MODULE_ENABLED */ +#ifdef HAL_FMPSMBUS_MODULE_ENABLED + #include "stm32f4xx_hal_fmpsmbus.h" +#endif /* HAL_FMPSMBUS_MODULE_ENABLED */ + #ifdef HAL_SPDIFRX_MODULE_ENABLED #include "stm32f4xx_hal_spdifrx.h" #endif /* HAL_SPDIFRX_MODULE_ENABLED */ @@ -415,14 +461,18 @@ #ifdef HAL_LPTIM_MODULE_ENABLED #include "stm32f4xx_hal_lptim.h" #endif /* HAL_LPTIM_MODULE_ENABLED */ - + +#ifdef HAL_MMC_MODULE_ENABLED + #include "stm32f4xx_hal_mmc.h" +#endif /* HAL_MMC_MODULE_ENABLED */ + /* Exported macro ------------------------------------------------------------*/ #ifdef USE_FULL_ASSERT /** * @brief The assert_param macro is used for function's parameters check. - * @param expr: If expr is false, it calls assert_failed function + * @param expr If expr is false, it calls assert_failed function * which reports the name of the source file and the source - * line number of the call that failed. + * line number of the call that failed. * If expr is true, it returns no value. * @retval None */ @@ -431,13 +481,12 @@ void assert_failed(uint8_t* file, uint32_t line); #else #define assert_param(expr) ((void)0U) -#endif /* USE_FULL_ASSERT */ +#endif /* USE_FULL_ASSERT */ #ifdef __cplusplus } #endif #endif /* __STM32F4xx_HAL_CONF_H */ - /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/Inc/stm32f4xx_it.h b/Inc/stm32f4xx_it.h index f4df838..7b72f56 100644 --- a/Inc/stm32f4xx_it.h +++ b/Inc/stm32f4xx_it.h @@ -24,7 +24,7 @@ #ifdef __cplusplus extern "C" { -#endif +#endif /* Private includes ----------------------------------------------------------*/ /* USER CODE BEGIN Includes */ diff --git a/Inc/usart.h b/Inc/usart.h index 8e140c6..2a6865e 100644 --- a/Inc/usart.h +++ b/Inc/usart.h @@ -1,12 +1,12 @@ /** ****************************************************************************** - * File Name : USART.h - * Description : This file provides code for the configuration - * of the USART instances. + * @file usart.h + * @brief This file contains all the function prototypes for + * the usart.c file ****************************************************************************** * @attention * - *

© Copyright (c) 2020 STMicroelectronics. + *

© Copyright (c) 2021 STMicroelectronics. * All rights reserved.

* * This software component is licensed by ST under BSD 3-Clause license, @@ -17,10 +17,11 @@ ****************************************************************************** */ /* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __usart_H -#define __usart_H +#ifndef __USART_H__ +#define __USART_H__ + #ifdef __cplusplus - extern "C" { +extern "C" { #endif /* Includes ------------------------------------------------------------------*/ @@ -43,14 +44,7 @@ void MX_USART1_UART_Init(void); #ifdef __cplusplus } #endif -#endif /*__ usart_H */ -/** - * @} - */ - -/** - * @} - */ +#endif /* __USART_H__ */ /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/Src/crc.c b/Src/crc.c index ca9d595..ed746ec 100644 --- a/Src/crc.c +++ b/Src/crc.c @@ -1,12 +1,12 @@ /** ****************************************************************************** - * File Name : CRC.c - * Description : This file provides code for the configuration - * of the CRC instances. + * @file crc.c + * @brief This file provides code for the configuration + * of the CRC instances. ****************************************************************************** * @attention * - *

© Copyright (c) 2020 STMicroelectronics. + *

© Copyright (c) 2021 STMicroelectronics. * All rights reserved.

* * This software component is licensed by ST under BSD 3-Clause license, @@ -28,9 +28,20 @@ void MX_CRC_Init(void) { + /* USER CODE BEGIN CRC_Init 0 */ + + /* USER CODE END CRC_Init 0 */ + /* Peripheral clock enable */ LL_AHB1_GRP1_EnableClock(LL_AHB1_GRP1_PERIPH_CRC); + /* USER CODE BEGIN CRC_Init 1 */ + + /* USER CODE END CRC_Init 1 */ + /* USER CODE BEGIN CRC_Init 2 */ + + /* USER CODE END CRC_Init 2 */ + } /* USER CODE BEGIN 1 */ diff --git a/Src/dma.c b/Src/dma.c index c135753..b741932 100644 --- a/Src/dma.c +++ b/Src/dma.c @@ -1,12 +1,12 @@ /** ****************************************************************************** - * File Name : dma.c - * Description : This file provides code for the configuration - * of all the requested memory to memory DMA transfers. + * @file dma.c + * @brief This file provides code for the configuration + * of all the requested memory to memory DMA transfers. ****************************************************************************** * @attention * - *

© Copyright (c) 2020 STMicroelectronics. + *

© Copyright (c) 2021 STMicroelectronics. * All rights reserved.

* * This software component is licensed by ST under BSD 3-Clause license, @@ -32,10 +32,10 @@ /* USER CODE END 1 */ -/** +/** * Enable DMA controller clock */ -void MX_DMA_Init(void) +void MX_DMA_Init(void) { /* Init with LL driver */ @@ -97,12 +97,4 @@ void MX_DMA_Init(void) /* USER CODE END 2 */ -/** - * @} - */ - -/** - * @} - */ - /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/Src/fsmc.c b/Src/fsmc.c index ed627a8..ece77cd 100644 --- a/Src/fsmc.c +++ b/Src/fsmc.c @@ -6,7 +6,7 @@ ****************************************************************************** * @attention * - *

© Copyright (c) 2020 STMicroelectronics. + *

© Copyright (c) 2021 STMicroelectronics. * All rights reserved.

* * This software component is licensed by ST under BSD 3-Clause license, @@ -29,8 +29,16 @@ SRAM_HandleTypeDef hsram1; /* FSMC initialization function */ void MX_FSMC_Init(void) { + /* USER CODE BEGIN FSMC_Init 0 */ + + /* USER CODE END FSMC_Init 0 */ + FSMC_NORSRAM_TimingTypeDef Timing = {0}; + /* USER CODE BEGIN FSMC_Init 1 */ + + /* USER CODE END FSMC_Init 1 */ + /** Perform the SRAM1 memory initialization sequence */ hsram1.Instance = FSMC_NORSRAM_DEVICE; @@ -65,6 +73,9 @@ void MX_FSMC_Init(void) Error_Handler( ); } + /* USER CODE BEGIN FSMC_Init 2 */ + + /* USER CODE END FSMC_Init 2 */ } static uint32_t FSMC_Initialized = 0; @@ -81,8 +92,8 @@ static void HAL_FSMC_MspInit(void){ /* Peripheral clock enable */ __HAL_RCC_FSMC_CLK_ENABLE(); - - /** FSMC GPIO Configuration + + /** FSMC GPIO Configuration PE7 ------> FSMC_D4 PE8 ------> FSMC_D5 PE9 ------> FSMC_D6 @@ -105,8 +116,8 @@ static void HAL_FSMC_MspInit(void){ PD7 ------> FSMC_NE1 */ /* GPIO_InitStruct */ - GPIO_InitStruct.Pin = GPIO_PIN_7|GPIO_PIN_8|GPIO_PIN_9|GPIO_PIN_10 - |GPIO_PIN_11|GPIO_PIN_12|GPIO_PIN_13|GPIO_PIN_14 + GPIO_InitStruct.Pin = GPIO_PIN_7|GPIO_PIN_8|GPIO_PIN_9|GPIO_PIN_10 + |GPIO_PIN_11|GPIO_PIN_12|GPIO_PIN_13|GPIO_PIN_14 |GPIO_PIN_15; GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; GPIO_InitStruct.Pull = GPIO_NOPULL; @@ -116,8 +127,8 @@ static void HAL_FSMC_MspInit(void){ HAL_GPIO_Init(GPIOE, &GPIO_InitStruct); /* GPIO_InitStruct */ - GPIO_InitStruct.Pin = GPIO_PIN_8|GPIO_PIN_9|GPIO_PIN_10|GPIO_PIN_13 - |GPIO_PIN_14|GPIO_PIN_15|GPIO_PIN_0|GPIO_PIN_1 + GPIO_InitStruct.Pin = GPIO_PIN_8|GPIO_PIN_9|GPIO_PIN_10|GPIO_PIN_13 + |GPIO_PIN_14|GPIO_PIN_15|GPIO_PIN_0|GPIO_PIN_1 |GPIO_PIN_4|GPIO_PIN_5|GPIO_PIN_7; GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; GPIO_InitStruct.Pull = GPIO_NOPULL; @@ -153,8 +164,8 @@ static void HAL_FSMC_MspDeInit(void){ FSMC_DeInitialized = 1; /* Peripheral clock enable */ __HAL_RCC_FSMC_CLK_DISABLE(); - - /** FSMC GPIO Configuration + + /** FSMC GPIO Configuration PE7 ------> FSMC_D4 PE8 ------> FSMC_D5 PE9 ------> FSMC_D6 @@ -177,12 +188,12 @@ static void HAL_FSMC_MspDeInit(void){ PD7 ------> FSMC_NE1 */ - HAL_GPIO_DeInit(GPIOE, GPIO_PIN_7|GPIO_PIN_8|GPIO_PIN_9|GPIO_PIN_10 - |GPIO_PIN_11|GPIO_PIN_12|GPIO_PIN_13|GPIO_PIN_14 + HAL_GPIO_DeInit(GPIOE, GPIO_PIN_7|GPIO_PIN_8|GPIO_PIN_9|GPIO_PIN_10 + |GPIO_PIN_11|GPIO_PIN_12|GPIO_PIN_13|GPIO_PIN_14 |GPIO_PIN_15); - HAL_GPIO_DeInit(GPIOD, GPIO_PIN_8|GPIO_PIN_9|GPIO_PIN_10|GPIO_PIN_13 - |GPIO_PIN_14|GPIO_PIN_15|GPIO_PIN_0|GPIO_PIN_1 + HAL_GPIO_DeInit(GPIOD, GPIO_PIN_8|GPIO_PIN_9|GPIO_PIN_10|GPIO_PIN_13 + |GPIO_PIN_14|GPIO_PIN_15|GPIO_PIN_0|GPIO_PIN_1 |GPIO_PIN_4|GPIO_PIN_5|GPIO_PIN_7); /* USER CODE BEGIN FSMC_MspDeInit 1 */ diff --git a/Src/gpio.c b/Src/gpio.c index 51db2dd..05e7968 100644 --- a/Src/gpio.c +++ b/Src/gpio.c @@ -1,12 +1,12 @@ /** ****************************************************************************** - * File Name : gpio.c - * Description : This file provides code for the configuration - * of all used GPIO pins. + * @file gpio.c + * @brief This file provides code for the configuration + * of all used GPIO pins. ****************************************************************************** * @attention * - *

© Copyright (c) 2020 STMicroelectronics. + *

© Copyright (c) 2021 STMicroelectronics. * All rights reserved.

* * This software component is licensed by ST under BSD 3-Clause license, @@ -19,6 +19,7 @@ /* Includes ------------------------------------------------------------------*/ #include "gpio.h" + /* USER CODE BEGIN 0 */ /* USER CODE END 0 */ @@ -30,9 +31,9 @@ /* USER CODE END 1 */ -/** Configure pins as - * Analog - * Input +/** Configure pins as + * Analog + * Input * Output * EVENT_OUT * EXTI diff --git a/Src/main.c b/Src/main.c index 1af644f..ad94dbd 100644 --- a/Src/main.c +++ b/Src/main.c @@ -17,7 +17,6 @@ ****************************************************************************** */ /* USER CODE END Header */ - /* Includes ------------------------------------------------------------------*/ #include "main.h" #include "crc.h" @@ -74,7 +73,6 @@ int main(void) /* USER CODE BEGIN 1 */ /* USER CODE END 1 */ - /* MCU Configuration--------------------------------------------------------*/ @@ -102,8 +100,6 @@ int main(void) /* USER CODE BEGIN 2 */ MainLoop(); /* USER CODE END 2 */ - - /* Infinite loop */ /* USER CODE BEGIN WHILE */ @@ -125,11 +121,12 @@ void SystemClock_Config(void) RCC_OscInitTypeDef RCC_OscInitStruct = {0}; RCC_ClkInitTypeDef RCC_ClkInitStruct = {0}; - /** Configure the main internal regulator output voltage + /** Configure the main internal regulator output voltage */ __HAL_RCC_PWR_CLK_ENABLE(); __HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE1); - /** Initializes the CPU, AHB and APB busses clocks + /** Initializes the RCC Oscillators according to the specified parameters + * in the RCC_OscInitTypeDef structure. */ RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE; RCC_OscInitStruct.HSEState = RCC_HSE_ON; @@ -143,7 +140,7 @@ void SystemClock_Config(void) { Error_Handler(); } - /** Initializes the CPU, AHB and APB busses clocks + /** Initializes the CPU, AHB and APB buses clocks */ RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK|RCC_CLOCKTYPE_SYSCLK |RCC_CLOCKTYPE_PCLK1|RCC_CLOCKTYPE_PCLK2; @@ -183,7 +180,7 @@ void Error_Handler(void) * @retval None */ void assert_failed(uint8_t *file, uint32_t line) -{ +{ /* USER CODE BEGIN 6 */ /* User can add his own implementation to report the file name and line number, tex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */ diff --git a/Src/spi.c b/Src/spi.c index 22f5ca9..4b4d512 100644 --- a/Src/spi.c +++ b/Src/spi.c @@ -1,12 +1,12 @@ /** ****************************************************************************** - * File Name : SPI.c - * Description : This file provides code for the configuration - * of the SPI instances. + * @file spi.c + * @brief This file provides code for the configuration + * of the SPI instances. ****************************************************************************** * @attention * - *

© Copyright (c) 2020 STMicroelectronics. + *

© Copyright (c) 2021 STMicroelectronics. * All rights reserved.

* * This software component is licensed by ST under BSD 3-Clause license, @@ -27,18 +27,23 @@ /* SPI2 init function */ void MX_SPI2_Init(void) { + + /* USER CODE BEGIN SPI2_Init 0 */ + + /* USER CODE END SPI2_Init 0 */ + LL_SPI_InitTypeDef SPI_InitStruct = {0}; LL_GPIO_InitTypeDef GPIO_InitStruct = {0}; /* Peripheral clock enable */ LL_APB1_GRP1_EnableClock(LL_APB1_GRP1_PERIPH_SPI2); - + LL_AHB1_GRP1_EnableClock(LL_AHB1_GRP1_PERIPH_GPIOB); - /**SPI2 GPIO Configuration + /**SPI2 GPIO Configuration PB13 ------> SPI2_SCK PB14 ------> SPI2_MISO - PB15 ------> SPI2_MOSI + PB15 ------> SPI2_MOSI */ GPIO_InitStruct.Pin = LL_GPIO_PIN_13|LL_GPIO_PIN_14|LL_GPIO_PIN_15; GPIO_InitStruct.Mode = LL_GPIO_MODE_ALTERNATE; @@ -48,6 +53,9 @@ void MX_SPI2_Init(void) GPIO_InitStruct.Alternate = LL_GPIO_AF_5; LL_GPIO_Init(GPIOB, &GPIO_InitStruct); + /* USER CODE BEGIN SPI2_Init 1 */ + + /* USER CODE END SPI2_Init 1 */ SPI_InitStruct.TransferDirection = LL_SPI_FULL_DUPLEX; SPI_InitStruct.Mode = LL_SPI_MODE_MASTER; SPI_InitStruct.DataWidth = LL_SPI_DATAWIDTH_8BIT; @@ -60,6 +68,9 @@ void MX_SPI2_Init(void) SPI_InitStruct.CRCPoly = 10; LL_SPI_Init(SPI2, &SPI_InitStruct); LL_SPI_SetStandard(SPI2, LL_SPI_PROTOCOL_MOTOROLA); + /* USER CODE BEGIN SPI2_Init 2 */ + + /* USER CODE END SPI2_Init 2 */ } diff --git a/Src/stm32f4xx_it.c b/Src/stm32f4xx_it.c index 68d5f0b..69db5a0 100644 --- a/Src/stm32f4xx_it.c +++ b/Src/stm32f4xx_it.c @@ -64,7 +64,7 @@ /* USER CODE END EV */ /******************************************************************************/ -/* Cortex-M4 Processor Interruption and Exception Handlers */ +/* Cortex-M4 Processor Interruption and Exception Handlers */ /******************************************************************************/ /** * @brief This function handles Non maskable interrupt. @@ -220,7 +220,7 @@ void DMA2_Stream2_IRQHandler(void) /* USER CODE BEGIN DMA2_Stream2_IRQn 0 */ HandleConsoleRxDmaIrq(); /* USER CODE END DMA2_Stream2_IRQn 0 */ - + /* USER CODE BEGIN DMA2_Stream2_IRQn 1 */ /* USER CODE END DMA2_Stream2_IRQn 1 */ @@ -234,7 +234,7 @@ void DMA2_Stream4_IRQHandler(void) /* USER CODE BEGIN DMA2_Stream4_IRQn 0 */ HandleLcdDmaIrq(); /* USER CODE END DMA2_Stream4_IRQn 0 */ - + /* USER CODE BEGIN DMA2_Stream4_IRQn 1 */ /* USER CODE END DMA2_Stream4_IRQn 1 */ @@ -248,7 +248,7 @@ void DMA2_Stream7_IRQHandler(void) /* USER CODE BEGIN DMA2_Stream7_IRQn 0 */ HandleConsoleTxDmaIrq(); /* USER CODE END DMA2_Stream7_IRQn 0 */ - + /* USER CODE BEGIN DMA2_Stream7_IRQn 1 */ /* USER CODE END DMA2_Stream7_IRQn 1 */ diff --git a/Src/usart.c b/Src/usart.c index e400185..12fd596 100644 --- a/Src/usart.c +++ b/Src/usart.c @@ -1,12 +1,12 @@ /** ****************************************************************************** - * File Name : USART.c - * Description : This file provides code for the configuration - * of the USART instances. + * @file usart.c + * @brief This file provides code for the configuration + * of the USART instances. ****************************************************************************** * @attention * - *

© Copyright (c) 2020 STMicroelectronics. + *

© Copyright (c) 2021 STMicroelectronics. * All rights reserved.

* * This software component is licensed by ST under BSD 3-Clause license, @@ -28,17 +28,22 @@ void MX_USART1_UART_Init(void) { + + /* USER CODE BEGIN USART1_Init 0 */ + + /* USER CODE END USART1_Init 0 */ + LL_USART_InitTypeDef USART_InitStruct = {0}; LL_GPIO_InitTypeDef GPIO_InitStruct = {0}; /* Peripheral clock enable */ LL_APB2_GRP1_EnableClock(LL_APB2_GRP1_PERIPH_USART1); - + LL_AHB1_GRP1_EnableClock(LL_AHB1_GRP1_PERIPH_GPIOA); - /**USART1 GPIO Configuration + /**USART1 GPIO Configuration PA9 ------> USART1_TX - PA10 ------> USART1_RX + PA10 ------> USART1_RX */ GPIO_InitStruct.Pin = LL_GPIO_PIN_9|LL_GPIO_PIN_10; GPIO_InitStruct.Mode = LL_GPIO_MODE_ALTERNATE; @@ -49,7 +54,7 @@ void MX_USART1_UART_Init(void) LL_GPIO_Init(GPIOA, &GPIO_InitStruct); /* USART1 DMA Init */ - + /* USART1_RX Init */ LL_DMA_SetChannelSelection(DMA2, LL_DMA_STREAM_2, LL_DMA_CHANNEL_4); @@ -92,6 +97,9 @@ void MX_USART1_UART_Init(void) NVIC_SetPriority(USART1_IRQn, NVIC_EncodePriority(NVIC_GetPriorityGrouping(),0, 0)); NVIC_EnableIRQ(USART1_IRQn); + /* USER CODE BEGIN USART1_Init 1 */ + + /* USER CODE END USART1_Init 1 */ USART_InitStruct.BaudRate = 115200; USART_InitStruct.DataWidth = LL_USART_DATAWIDTH_8B; USART_InitStruct.StopBits = LL_USART_STOPBITS_1; @@ -102,6 +110,9 @@ void MX_USART1_UART_Init(void) LL_USART_Init(USART1, &USART_InitStruct); LL_USART_ConfigAsyncMode(USART1); LL_USART_Enable(USART1); + /* USER CODE BEGIN USART1_Init 2 */ + + /* USER CODE END USART1_Init 2 */ }