/** * @package Opentherm library for ESP-IDF framework * @author: Mikhail Sazanof * @copyright Copyright (C) 2024 - Sazanof.ru * @licence MIT */ #include #include "freertos/FreeRTOS.h" #include "freertos/task.h" #include "driver/gpio.h" #include "esp_timer.h" static portMUX_TYPE mux = portMUX_INITIALIZER_UNLOCKED; #define PORT_ENTER_CRITICAL portENTER_CRITICAL(&mux) #define PORT_EXIT_CRITICAL portEXIT_CRITICAL(&mux) #ifndef ESP_OT_BIT #define ESP_OT_BIT(b) (1UL << (b)) #define ESP_OT_BIT_READ(value, ESP_OT_BIT) ((value >> ESP_OT_BIT) & 0x01) #endif // ENUMS typedef enum OpenThermResponseStatus { OT_STATUS_NONE, OT_STATUS_SUCCESS, OT_STATUS_INVALID, OT_STATUS_TIMEOUT } open_therm_response_status_t; typedef enum OpenThermMessageType // old name OpenThermRequestType; // for backwared compatibility { /* Master to Slave */ OT_READ_DATA = 0b000, OT_WRITE_DATA = 0b001, OT_INVALID_DATA = 0b010, OT_RESERVED = 0b011, /* Slave to Master */ OT_READ_ACK = 0b100, OT_WRITE_ACK = 0b101, OT_DATA_INVALID = 0b110, OT_UNKNOWN_DATA_ID = 0b111 } open_therm_message_type_t; typedef enum OpenThermMessageID { MSG_ID_STATUS = 0, // flag8/flag8 Master and Slave Status flags. MSG_ID_T_SET = 1, // f8.8 Control Setpoint i.e.CH water temperature Setpoint(°C) MSG_ID_M_CONFIG_M_MEMEBER_ID_CODE = 2, // flag8/u8 Master Configuration Flags / Master MemberID Code MSG_ID_S_CONFIG_S_MEMEBER_ID_CODE = 3, // flag8/u8 Slave Configuration Flags / Slave MemberID Code MSG_ID_REMOTE_REQUEST = 4, // u8/u8 Remote Request MSG_ID_ASF_FLAGS = 5, // flag8/u8 Application - specific fault flags and OEM fault code MSG_ID_RBP_FLAGS = 6, // flag8/flag8 Remote boiler parameter transfer - enable & read / write flags MSG_ID_COOLING_CONTROL = 7, // f8.8 Cooling control signal(%) MSG_ID_T_SET_CH2 = 8, // f8.8 Control Setpoint for 2e CH circuit(°C) MSG_ID_TR_OVERRIDE = 9, // f8.8 Remote override room Setpoint MSG_ID_TSP = 10, // u8/u8 Number of Transparent - Slave - Parameters supported by slave MSG_ID_TSP_INDEX_TSP_VALUE = 11, // u8/u8 Index number / Value of referred - to transparent slave parameter. MSG_ID_FHB_SIZE = 12, // u8/u8 Size of Fault - History - Buffer supported by slave MSG_ID_FHB_INDEX_FHB_VALUE = 13, // u8/u8 Index number / Value of referred - to fault - history buffer entry. MSG_ID_MAX_REL_MOD_LEVEL_SETTINGG = 14, // f8.8 Maximum relative modulation level setting(%) MSG_ID_MAX_CAPACITY_MIN_MOD_LEVEL = 15, // u8/u8 Maximum boiler capacity(kW) / Minimum boiler modulation level(%) MSG_ID_TR_SET = 16, // f8.8 Room Setpoint(°C) MSG_ID_REL_MOD_LEVEL = 17, // f8.8 Relative Modulation Level(%) MSG_ID_CH_PRESSURE = 18, // f8.8 Water pressure in CH circuit(bar) MSG_ID_DHW_FLOW_RATE = 19, // f8.8 Water flow rate in DHW circuit. (litres / minute) MSG_ID_DAY_TIME = 20, // special/u8 Day of Week and Time of Day MSG_ID_DATE = 21, // u8/u8 Calendar date MSG_ID_YEAR = 22, // u16 Calendar year MSG_ID_TR_SET_CH2 = 23, // f8.8 Room Setpoint for 2nd CH circuit(°C) MSG_ID_TR = 24, // f8.8 Room temperature(°C) MSG_ID_TBOILER = 25, // f8.8 Boiler flow water temperature(°C) MSG_ID_TDHW = 26, // f8.8 DHW temperature(°C) MSG_ID_TOUTSIDE = 27, // f8.8 Outside temperature(°C) MSG_ID_TRET = 28, // f8.8 Return water temperature(°C) MSG_ID_TSTORAGE = 29, // f8.8 Solar storage temperature(°C) MSG_ID_TCOLLECTOR = 30, // f8.8 Solar collector temperature(°C) MSG_ID_T_FLOW_CH2 = 31, // f8.8 Flow water temperature CH2 circuit(°C) MSG_ID_TDHW2 = 32, // f8.8 Domestic hot water temperature 2 (°C) MSG_ID_TEXHAUST = 33, // s16 Boiler exhaust temperature(°C) MSG_ID_TBOILER_HEAT_EEXCHANGER = 34, // f8.8 Boiler heat exchanger temperature(°C) MSG_ID_BOILER_FAN_SSPEED_SETPOINT_AND_ACTIAL = 35, // u8/u8 Boiler fan speed Setpoint and actual value MSG_ID_FLAME_CURRENT = 36, // f8.8 Electrical current through burner flame[μA] MSG_ID_TR_CH2 = 37, // f8.8 Room temperature for 2nd CH circuit(°C) MSG_ID_RELATIVE_HUMIDITY = 38, // f8.8 Actual relative humidity as a percentage MSG_ID_TR_OOVERRIDE2 = 39, // f8.8 Remote Override Room Setpoint 2 MSG_ID_TDHW_SET_UBT_DHW_SET_LB = 48, // s8/s8 DHW Setpoint upper & lower bounds for adjustment(°C) MSG_ID_MAX_TSET_UB_MAX_TSET_LB = 49, // s8/s8 Max CH water Setpoint upper & lower bounds for adjustment(°C) MSG_ID_TDHW_SET = 56, // f8.8 DHW Setpoint(°C) (Remote parameter 1) MSG_ID_MAX_TSET = 57, // f8.8 Max CH water Setpoint(°C) (Remote parameters 2) MSG_ID_STATUS_VENTILATION_HEAT_RECOVERY = 70, // flag8/flag8 Master and Slave Status flags ventilation / heat - recovery MSG_ID_VSET = 71, // -/u8 Relative ventilation position (0-100%). 0% is the minimum set ventilation and 100% is the maximum set ventilation. MSG_ID_ASF_FLAGS_OEM_FAULT_CODE_VENTILATION_HEAT_RECOVERY = 72, // flag8/u8 Application-specific fault flags and OEM fault code ventilation / heat-recovery MSG_ID_OEM_DDIAGNOSTIC_CODE_VENTILATION_HEAT_RECOVERY = 73, // u16 An OEM-specific diagnostic/service code for ventilation / heat-recovery system MSG_ID_S_CONFIG_S_MEMEBER_ID_CODE_VENTILATION_HEAT_RECOVERY = 74, // flag8/u8 Slave Configuration Flags / Slave MemberID Code ventilation / heat-recovery MSG_ID_OPENTHERM_VVERSION_VENTILATION_HEAT_RECOVERY = 75, // f8.8 The implemented version of the OpenTherm Protocol Specification in the ventilation / heat-recovery system. MSG_ID_VENTILATION_HEAT_RECOVERY_VERSION = 76, // u8/u8 Ventilation / heat-recovery product version number and type MSG_ID_REL_VENT_LEVEL = 77, // -/u8 Relative ventilation (0-100%) MSG_ID_RH_EXHAUST = 78, // -/u8 Relative humidity exhaust air (0-100%) MSG_ID_CO2_EXHAUST = 79, // u16 CO2 level exhaust air (0-2000 ppm) MSG_ID_TSI = 80, // f8.8 Supply inlet temperature (°C) MSG_ID_TSO = 81, // f8.8 Supply outlet temperature (°C) MSG_ID_TEI = 82, // f8.8 Exhaust inlet temperature (°C) MSG_ID_TEO = 83, // f8.8 Exhaust outlet temperature (°C) MSG_ID_RPM_EXHAUST = 84, // u16 Exhaust fan speed in rpm MSG_ID_RPM_SUPPLY = 85, // u16 Supply fan speed in rpm MSG_ID_RBP_FLAGS_VENTILATION_HEAT_RECOVERY = 86, // flag8/flag8 Remote ventilation / heat-recovery parameter transfer-enable & read/write flags MSG_ID_NOMINAL_VENTILATION_VALUE = 87, // u8/- Nominal relative value for ventilation (0-100 %) MSG_ID_TSP_VENTILATION_HEAT_RECOVERY = 88, // u8/u8 Number of Transparent-Slave-Parameters supported by TSP’s ventilation / heat-recovery MSG_ID_TSPindexTSP_VALUE_VENTILATION_HEAT_RECOVERY = 89, // u8/u8 Index number / Value of referred-to transparent TSP’s ventilation / heat-recovery parameter. MSG_ID_FHB_SIZE_VENTILATION_HEAT_RECOVERY = 90, // u8/u8 Size of Fault-History-Buffer supported by ventilation / heat-recovery MSG_ID_FHB_INDEX_FHB_VALUE_VENTILATION_HEAT_RECOVERY = 91, // u8/u8 Index number / Value of referred-to fault-history buffer entry ventilation / heat-recovery MSG_ID_BRAND = 93, // u8/u8 Index number of the character in the text string ASCII character referenced by the above index number MSG_ID_BRAND_VERSION = 94, // u8/u8 Index number of the character in the text string ASCII character referenced by the above index number MSG_ID_BRAND_SERIAL_NUMBER = 95, // u8/u8 Index number of the character in the text string ASCII character referenced by the above index number MSG_ID_COOLING_OPERATION_HOURS = 96, // u16 Number of hours that the slave is in Cooling Mode. Reset by zero is optional for slave MSG_ID_POWER_CYCLES = 97, // u16 Number of Power Cycles of a slave (wake-up after Reset), Reset by zero is optional for slave MSG_ID_RF_SENSOR_STATUS_INFORMATION = 98, // special/special For a specific RF sensor the RF strength and battery level is written MSG_ID_REMOTE_OVERRIDE_OOPERATING_MODE_HEATING_DHW = 99, // special/special Operating Mode HC1, HC2/ Operating Mode DHW MSG_ID_REMOTE_OVERRIDE_FUNCTION = 100, // flag8/- Function of manual and program changes in master and remote room Setpoint MSG_ID_STATUS_SOLAR_STORAGE = 101, // flag8/flag8 Master and Slave Status flags Solar Storage MSG_ID_ASF_FLAGS_OEMFAULT_CODE_SOLAR_STORAGE = 102, // flag8/u8 Application-specific fault flags and OEM fault code Solar Storage MSG_ID_S_CONFIG_S_MEMBER_ID_CODE_SOLAR_STORAGE = 103, // flag8/u8 Slave Configuration Flags / Slave MemberID Code Solar Storage MSG_ID_SOLAR_STORAGE_VERSION = 104, // u8/u8 Solar Storage product version number and type MSG_ID_TSP_SOLAR_SSTORAGE = 105, // u8/u8 Number of Transparent - Slave - Parameters supported by TSP’s Solar Storage MSG_ID_TSP_INDEX_TSP_VALUE_SOLAR_STORAGE = 106, // u8/u8 Index number / Value of referred - to transparent TSP’s Solar Storage parameter. MSG_ID_FHB_SIZE_SOLAR_STORAGE = 107, // u8/u8 Size of Fault - History - Buffer supported by Solar Storage MSG_ID_FHB_INDEX_FHB_VALUE_SOLAR_STORAGE = 108, // u8/u8 Index number / Value of referred - to fault - history buffer entry Solar Storage MSG_ID_ELECTRICITY_PRODUCER_STARTS = 109, // U16 Number of start of the electricity producer. MSG_ID_ELECTRICITY_PRODUCER_HOURS = 110, // U16 Number of hours the electricity produces is in operation MSG_ID_ELECTRICITY_PRODUCTION = 111, // U16 Current electricity production in Watt. MSG_ID_CUMULATIV_ELECTRICITY_PRODUCTION = 112, // U16 Cumulative electricity production in KWh. MSG_ID_UNSUCCESSFULL_BURNER_STARTS = 113, // u16 Number of un - successful burner starts MSG_ID_FLAME_SIGNAL_TOO_LOW_NUMBER = 114, // u16 Number of times flame signal was too low MSG_ID_OEM_DDIAGNOSTIC_CODE = 115, // u16 OEM - specific diagnostic / service code MSG_ID_SUCESSFULL_BURNER_SSTARTS = 116, // u16 Number of succesful starts burner MSG_ID_CH_PUMP_STARTS = 117, // u16 Number of starts CH pump MSG_ID_DHW_PUPM_VALVE_STARTS = 118, // u16 Number of starts DHW pump / valve MSG_ID_DHW_BURNER_STARTS = 119, // u16 Number of starts burner during DHW mode MSG_ID_BURNER_OPERATION_HOURS = 120, // u16 Number of hours that burner is in operation(i.e.flame on) MSG_ID_CH_PUMP_OPERATION_HOURS = 121, // u16 Number of hours that CH pump has been running MSG_ID_DHW_PUMP_VALVE_OPERATION_HOURS = 122, // u16 Number of hours that DHW pump has been running or DHW valve has been opened MSG_ID_DHW_BURNER_OOPERATION_HOURS = 123, // u16 Number of hours that burner is in operation during DHW mode MSG_ID_OPENTERM_VERSION_MASTER = 124, // f8.8 The implemented version of the OpenTherm Protocol Specification in the master. MSG_ID_OPENTERM_VERSION_SLAVE = 125, // f8.8 The implemented version of the OpenTherm Protocol Specification in the slave. MSG_ID_MASTER_VERSION = 126, // u8/u8 Master product version number and type MSG_ID_SLAVE_VERSION = 127, // u8/u8 Slave product version number and type } open_therm_message_id_t; typedef enum OpenThermStatus { OT_NOT_INITIALIZED, OT_READY, OT_DELAY, OT_REQUEST_SENDING, OT_RESPONSE_WAITING, OT_RESPONSE_START_BIT, OT_RESPONSE_RECEIVING, OT_RESPONSE_READY, OT_RESPONSE_INVALID } esp_ot_opentherm_status_t; // ENUMS esp_err_t esp_ot_init( gpio_num_t _pin_in, gpio_num_t _pin_out, bool _esp_ot_is_slave, void (*esp_ot_process_responseCallback)(unsigned long, open_therm_response_status_t)); bool esp_ot_is_ready(); unsigned long esp_ot_send_request(unsigned long request); bool esp_ot_send_response(unsigned long request); bool esp_ot_send_request_async(unsigned long request); unsigned long esp_ot_build_request(open_therm_message_type_t type, open_therm_message_id_t id, unsigned int data); unsigned long esp_ot_build_response(open_therm_message_type_t type, open_therm_message_id_t id, unsigned int data); unsigned long esp_ot_get_last_response(); open_therm_response_status_t esp_ot_get_last_response_status(); void esp_ot_handle_interrupt(); void process(); bool parity(unsigned long frame); open_therm_message_type_t esp_ot_get_message_type(unsigned long message); open_therm_message_id_t esp_ot_get_data_id(unsigned long frame); bool esp_ot_is_valid_request(unsigned long request); bool esp_ot_is_valid_response(unsigned long response); int esp_ot_read_state(); void esp_ot_set_active_state(); void esp_ot_set_idle_state(); void esp_ot_activate_boiler(); void esp_ot_send_bit(bool high); void esp_ot_process_response(); unsigned long esp_ot_build_set_boiler_status_request(bool enableCentralHeating, bool enableHotWater, bool enableCooling, bool enableOutsideTemperatureCompensation, bool enableCentralHeating2); unsigned long esp_ot_build_set_boiler_temperature_request(float temperature); unsigned long esp_ot_build_get_boiler_temperature_request(); bool esp_ot_is_fault(unsigned long response); bool esp_ot_is_central_heating_active(unsigned long response); bool esp_ot_is_hot_water_active(unsigned long response); bool esp_ot_is_flame_on(unsigned long response); bool esp_ot_is_cooling_active(unsigned long response); bool esp_ot_is_diagnostic(unsigned long response); uint16_t esp_ot_get_uint(const unsigned long response); float esp_ot_get_float(const unsigned long response); unsigned int esp_ot_temperature_to_data(float temperature); unsigned long esp_ot_set_boiler_status(bool enableCentralHeating, bool enableHotWater, bool enableCooling, bool enableOutsideTemperatureCompensation, bool enableCentralHeating2); bool esp_ot_set_boiler_temperature(float temperature); float esp_ot_get_boiler_temperature(); float esp_ot_get_return_temperature(); bool esp_ot_set_dhw_setpoint(float temperature); float esp_ot_get_dhw_temperature(); float esp_ot_get_modulation(); float esp_ot_get_pressure(); unsigned char esp_ot_get_fault(); unsigned long ot_reset(); unsigned long esp_ot_get_slave_product_version(); float esp_ot_get_slave_ot_version();